Zhone Technologies
Industry UpdateJanuary 2012
Q4 2011 Preliminary Analyst Reports
• Q4 2011 Preliminary Analyst Reports reflect sustained GPON leadership for Zhone Technologies
• This would be our 8th Consecutive Quarter as a Top 5 Leader in each of our served GPON markets
– Top 3 leadership for GPON in Caribbean and Latin America
– Top 3 leadership for GPON in Europe, Middle East and Africa
– Top 4-market position for GPON in North America
– Top 5-market position for GPON Globally
Cross-comparison from industry analyst including Infonetics, IDC, OVUM, Broadband Trends and Ditteberner
GPON Analyst Rankings EMEA
Quarter/Year Q1/10 Q2/10 Q3/10 Q4/10 Q1/11 Q2/11 Q3/11 Q4/11
Ranking #3 #3 #1 #3 #3 #3 #3 #3
Cross-comparison from industry analyst including Infonetics, IDC, OVUM, Broadband Trends and Ditteberner
GPON Analyst Rankings CALA
Quarter/Year Q1/10 Q2/10 Q3/10 Q4/10 Q1/11 Q2/11 Q3/11 Q4/11
Ranking #3 #2 #1 #2 #2 #3 #3 #3
Cross-representation from industry analyst including Infonetics, IDC, OVUM, Broadband Trends and Ditteberner
GPON Analyst Rankings Global
Quarter/Year Q1/10 Q2/10 Q3/10 Q4/10 Q1/11 Q2/11 Q3/11 Q4/11
Ranking #3 #3 #4 #3 #4 #5 #5 #5
Cross-representation from industry analyst including Infonetics, IDC, OVUM, Broadband Trends and Ditteberner
Zhone FTTX CustomersQ1/2009 – Q1/2012
8*GPON and Active Ethernet
Staggering Growth in Zhone ONT Ports
*GPON and Active Ethernet/ONT Ports
Explosive Growth – outpacing the industry! Zhone OLT FTTX Ports!
*GPON and Active Ethernet/OLT Ports
Gigabit Passive Optical Networking (GPON) Product Assessments
11
Zhone Technologies MXKZhone’s MXK OLT solution supports very compelling capacity and throughput metrics, and the company has generated strong market traction with the MXK to date, shipping more than 2,600 systems in its first eight quarters of general availability.
12
Gartner Magic Quadrant for Fiber-to-the Home Equipment
Report December 2011
Gartner
The Latest 2011 Infonetics FTTH-PON Service Provider Survey!
• In GPON… Zhone ranked #2, Zhone’s MXK platform and new line of ONT’s have made a strong impression among tier 3 operators…
• In Ethernet FTTX… Zhone again ranked #2 general sentiment among operators –Zhone’s MXK and range of ONT’s are very solid products, Zhone had issues back in 2007 and 2008, however, strong international exposure along with steady growth among domestic operators have increased its prospects significantly…
14
MXK surpasses 20M GPON Subscriber System Capacity
MXK exceeds 3,000 system deployments globally at over 150 service providers in more than 40 countries
Zhone shipped nearly 2,200 MXK’s in 2011!
Zhone experienced over 9,800% Growth in FTTX OLT ports,
and over 8,500% Growth in FTTX ONT ports!
MXK Review
Video/IPTV
Data
Voice
Mobile Backhaul
Residential
Business
MXKAny Port – Any Servicehigh-performance all
IP Solutions designed for today’s traffic mix over Copper or Fiber!
16
Highly FlexibleAny Port – Any ServiceMulti-Service Access Solutions
Zhone’s SLMS Architecture – Designed for Triple Play
• Zhone’s Single line, Multi-service (SLMS) access operating system creates unique value for any network — (fiber, copper, and wireless)
• 10 years of commercial operation experience
• For carriers:– Reduced capex, opex, TCO and network
complexity
– Increased flexibility for new service deployment and network transitions
• For Zhone:– Reduced time to market and development
costs for new features
– Industry leadership – deployed with over 700 operators globally
MXK – Designed for Maximum Interoperability
Zhone products and solutions have been tested for interoperability with a diverse
range of softswitches and video systems –such as Call Control, Media Gateway,
ONTs, Head-end, Middleware, VOD, and Set-top devices
18
COPPER
ADSL2+POTSEFM
VDSL2T1/E1 PWE
Fiber Tray & Cable Management
FIBER
4/8 x GPON20 x Active Ethernet
(10G GPON)
Removable fan & filter assembly with status LEDs
MXK 819, 823
MXK 319
Redundant controllers + uplinks
14 line cards (19”) 18 line cards (23”)
Hot swappable
7 line cardsHot swappable
UPLINKS
2x 10G + 8x1G8x1G4x1G
The MXK Multiservice Access Platform
• Physical design
– Distributed Ethernet switch fabric;
L2 efficiency + L3 intelligence
– Completely passive backplane allows
upgrade from 400 Gbps through 1T
capacity by uplink swap-out alone
– Slots A & B dedicated to uplink cards, with
hitless redundancy
– Slots 1-18 are universal, slots 1-9 grouped
to the left of the uplinks, slots 10-18 to the
right
– All cards & chassis I-temp for remote node
installations
• Unrivaled capacity
– Up to 20 Gbps per slot (non-blocking
1/2.5/10 G serial links per slot from each
of the 2 uplinks)
– Architecture supports non-blocking service
for up to 3,600 100 Mbps GPON subs, or…
– Up to 360 1 G Active Ethernet subs
MXK Architecture
Features
Unmatched Scaling Efficiency
Lower Capex
• Initial 400 Gbps backplane, nonblocking 20G to every slot
• Multiple uplink options2x10G+8x1G, 8x1G,4x1G (at 1 or 2.5G per slot)
• 4- and 8-port GPON cards
• 20-port Active Ethernet cards
• Architected for multi-service access (ADSL, ADSL2+ 72 POTs, VDSL, SHDSL, and Voice)
• Non-blocking service to 3,600 100 Mbps GPON subs or360 1G Active Ethernet subs
• Substantially more bandwidth in your access network
• More subscribers per rack
• Higher utilization of costly distribution ports
• Capex optimized for application requirements
• Future-proof investment– Modular, distributed
architecture
– Expansion in service scope
Benefits
MXK: Unmatched Scaling Efficiency
SLMS Features• Native IP network control, with a
wealth of QoE and security features, including…
– Multicast IGMP
– Q-in-Q
– 3-color policing
– 802.1p
– Secure bridging, SSH, SFTP, HTTPs, port access, ACLs
– EAPS
– RSTP
– MSTP
• Increased service options
• Better Quality of Experience
– Improve customer retention
– Generate customer goodwill
• Tailor services to meet business needs
• Sophisticated security and control
Benefits
Superior Service Intelligence
Higher Revenues
MXK: Superior Service Intelligence
23
Indoor/Outdoor
PREMISE
xDSL Modems
VO
IC
E •
DA
TA
EN
TER
TA
IN
ME
NT
ConvergedMulti-
serviceMSAP
CORE
MXK
THE IP ZHONEResidential Broadband – HSI/Gaming
• Bridged or Routed Full compliant with TR-101 and TR-156
• Full support for VLAN features for 1:N or 1:1 service offering
• Enhanced DHCP feature and Security to all carrier control of address assignments or control number of Subscribers per site
• Support force to policy device or P-2-P for Gaming
• All feature independent
of access media
24
THE IP ZHONEBusniess Broadband – HSI or MetroE Services
• Designed for flexibility of service offering
• Allowing carrier to integrate residential and Metro device in single system
• E-Line, E-LAN, E-Tree and Circuit Emulation Services all supported in single system agnostic to access architecture
• Full traffic Management available on a per service basis
Indoor/Outdoor
PREMISE
xDSL Modems
VO
IC
E •
DA
TA
EN
TE
RT
AIN
MEN
T
ConvergedMulti-
serviceMSAP
CORE
MXK
MXK - Video ServicesVideo over IP or RF
• Special Packet Handling for IGMP to enhance the end users viewing of IPTV
• Sure Channel changing and content production
• MXK supports Video distribution via RF (PON Only) or Full IPTV
• MXK enhances IPTV capabilities
• Support Both HD and SD Streams with MPEG, MPEG4, or WM10
• Support for VDSL2, ADSL2+, Bonding, Active Ethernet and PON
• Support IGMP Proxy
• Support for IGMP Snooping
• Support for IGMP Snooping -
with Proxy Reporting
Indoor/Outdoor
PREMISE
xDSL Modems
VO
IC
E •
DA
TA
EN
TE
RT
AIN
MEN
T
ConvergedMulti-
serviceMSAP
CORE
MXK
MXK Video Services – IPTV
• IP Video Optimized for Access Network
• Multicast for Standard or High Definition TV Video for Broadcast emulation
• Multicast at the MxK to customer premises once
• Channel change operations are distributed across the network
• Reduces the need for large core multicast routers
• Each MxK is responsible for channel changing of attached devices
• Unicast for Video on Demand.
Indoor/Outdoor
PREMISE
xDSL Modems
VO
IC
E •
DA
TA
EN
TE
RT
AIN
MEN
T
ConvergedMulti-
serviceMSAP
CORE
MXK
MXK High Port Density Per Chassis
Line Card TypeMXK 3193 RU high
MXK 8198 RU high
MXK 8238 RU high
POTS 72-504 ports 72-1008 ports 72-1296 ports
P-Phone/ISDN 24-168 ports 24-336 ports 24-432 ports
ADSL2+ 72-504 ports 72-1008 ports 72-1296 ports
ADSL2+/POTS 48-288 ports 48-576 ports 48-768 ports
SHDSL EFM 24-168 ports 24-336 ports 24-432 ports
VDSL2/POTS 24-168 ports 24-336 ports 24-432 ports
VDSL2 48-336 ports 48-672 ports 48-864 ports
T1/E1-TDM (PWE3) 24-168 ports 24-336 ports 24-432 ports
T1/E1-PKT/EFM 24-168 ports 24-336 ports 24-432 ports
GPON OLT 512-3584 subs 512-7168 subs 512-9216 subs
Active Ethernet 20-140 ports 20-280 ports 20-320 ports
FTTx
Zhone FiberHome Solution
FIBER
4/8 x GPON20 x Active Ethernet
MXK 819, 823
MXK 319
14 line cards (19”) 18 line cards (23”)
7 line cards
UPLINKS
2x 10G + 8x1G8x1G4x1G
MXK OLT Chassis
MXK GPON Line Cards
• 4- and 8-port OLT configurations
• ITU GPON standard
– 2.5 Gbps downstream / 1.25 Gbps upstream per port
• Up to 64 splits per port
• Class B+ and C+ optics support
• Line card and SFPs are I-temp
• 10G connection to each uplink
• Up to 720 ports per 7’ rack (5 x 23” chassis), or up to 46,080 subs at 64 splits
MXK Active Ethernet Line Cards
• Single Slot: 20 subscribers per card
– Compact SFP Mode 2 or Standard SFP
• (2 subscribers per SFP)
– Single channel SFP
– 10Gbps throughput per card
– 1,800 subs per 7’ rack(5 x 23” chassis)
• Dual Slot: 20 1GigE SFP Slots
– Mix and Match SFP Types Copper/Fiber
– Non-blocking 20G total bandwidth (using 2 slots)
– 800 subs per rack
• 1U high (Front and Rear LEDs) 17.4 in x 11.3 in.
442 mm x 237 mm
• Uplink Options 8x FE/GE
SFP & Copper 10/100 BT ports
2x 10GE (Optional)
XFP ports
• GPON Support 4 Ports (SFP-based) w/ OMCI
• Web GUI Intuitive Web Interface for device
configuration, monitoring & management
ZHONE - CONFIDENTIAL
• 1U high (Front and Rear LEDs) 17.4 in x 11.3 in.
442 mm x 237 mm
• Uplink Options 8x FE/GE
SFP & Copper 10/100 BT ports
2x 10GE (Optional)
XFP ports
• GPON Support 8 Ports (SFP-based) w/ OMCI
• Web GUI Intuitive Web Interface for device
configuration, monitoring & management
MXK 1U GPON OLT – 194/198
Hardware• 108 Gbps switch with capability of
processing 160 Million packets per second (Mpps)
• Dual Power Inputs• Alarm Inputs/Outputs• More Uplink ports
• 8 x FE/GE• 2 x 10GE (different models)
• Port Status LEDs• Removable Fan Tray
Software• Full ZMS & EZ-Touch support• GPON Class B+/C+ SFP support• Link Agg, RSTP and EAPS
NO/NC
Alarm
Outputs
SFP Cages for
Copper/Fiber
FE/GE Uplinks
Port
Status
LEDs
Dual -48 VDC
Power Connector
NO/NC
Alarm
Inputs
XFP Cages for
10GE Uplinks
MXK-194 & MXK-198
GPON Density Options
• 8RU, 3RU, and 1RU MXK OLT options give flexibility in GPON deployments
• Use the 8RU MXK to aggregate multiple 319 or 198 OLT
Up to 4608 GPON subscribers (32 split,
23” chassis)
Up to 1792 GPON subscribers on the MXK
319 chassis
Up to 256 GPON subscribers on the MXK
198.
Use Ethernet to extend the reach of PON
Extend the Reach of GPON
10Gig
Redundant1 Gig bonded
• Bond multiple Gig Ethernet for remote deployments
• Extend the reach of GPON
• Bandwidth to carry FTTH services
Technology Options
• Active Ethernet and GPON support in a single chassis
• GPON for high density deployments
• Active Ethernet for long distance or high bandwidth deployments
T1/E1 Transport over Fiber -
• Migrate T1/E1 circuits to the fiber network
• Aggregation using the MALC or MXK
• Active Ethernet or GPON ONT at the customer premises / cellular tower
Cellular Backhaul
Indoor ONTs
• Dual-core Broadcom Solution
– High performance triple-play applications
• Next Gen GPON Ready
– G.984.5 compliant w/built in Wavelength Blocking Filter
• Zhone Largo SW
– Homogenous look and feel across zNID families
– Same software base as 42xx and 9xxx outdoor ONU
• Cost Competitive
– Indoor design
– No grounding
zNID-GPON-24xx
zNID 24xx SIP & MGCP Features
• SIP (RFC 3261)
• SIP-PLAR
• MGCP
• 5 REN per line
• Multiple voice codec:
– G.711 (u/a-law), G.726, G.729 (A and B)
• Echo Canceling, Voice Activity Detection, Comfort Noise Insertion
• Various CLASS services
– Caller ID, Call Waiting, Call Forwarding, Call Transfer
• T.30 and T.38 Fax
• G.711 fallback for Fax
zNID 24xx Wireless Features
• 2x2 MIMO
• Antenna: 5dBi
• 25dBM EIRP (316mW) Max Tx Power
• Max number of subscriber: 128
• SSID support: 4
• 1:1 Mapping of SSID to VLANs
• WEP, WPA-PSK, WPA2-PSK
• 802.1x
• MAC address filtering
• 802.1 b/g/n
• Management
- ZMS support
- Web GUI
- CLI
- SNMP
• Physical / Environmental
- Desk or wall mount
- 0C to +40C
• Interfaces
- 1 Active Ethernet Gigabit
(Integrated Fiber Module)
- 2 POTS – SIP, SIP-PLAR or MGCP
- Up to 4 GE LAN ports
- Optional WiFi
• Packet Handling
- IGMP Snooping / IP Video support
- Wire-speed bridging, Routing, PPPoE
- PPPoE Client
- QoS, VLANs, Rate Limiting
- Q-in-Q
zNID-GE-24xx Series
zNID-24xxx Family of ONTs
Model Description
ZNID-GE-2402 Indoor, GE Uplink, 0 POTS, 2 GE
ZNID-GE-2424 Indoor, GE Uplink, 2 POTS, 4 GE
ZNID-GE-2426 Indoor, GE Uplink, 2 POTS, 4 GE, WiFi, USB
ZNID-GPON-2402 Indoor, GPON Uplink, 0 POTS, 2 GE
ZNID-GPON-2403 Indoor, GPON Uplink, 0 POTS, 2 GE, RFV
ZNID-GPON-2424 Indoor, GPON Uplink, 2 POTS, 4 GE
ZNID-GPON-2425 Indoor, GPON Uplink, 2 POTS, 4 GE, RFV
ZNID-GPON-2426 Indoor, GPON Uplink, 2 POTS, 4 GE, WiFi, USB
ZNID-GPON-2427 Indoor, GPON Uplink, 2 POTS, 4 GE, RF, WiFi, USB
Outdoor ONTs
zNID-GPON-424x / 422x zNIDs• Interfaces
• 4x or 2x POTS –
• SIP, SIP-PLAR & MGCP
• 2 GE LAN ports
• HPNAv3.1 over Coax
• HPNAv3.1 over Phone (line 1)
• Active GE uplink (SFP cage) or
• GPON uplink
• RF Video support
• USB Craft Port
• Packet Handling
• IGMP Snooping / IP Video support
• Wire-speed routing or bridging
• PPPoE Client
• Full QoS, VLANs, Rate Limiting
• Q-in-Q
• Management
• ZMS CPE Manager support
• SNMP Traps & interface stats
• HTTP/HTTPS browser interface
• Physical / Environmental
• Extended Temp
• Corning outdoor enclosure
• 12V power (7-pin interface)
zNID-GE-4226zNID-GPON-4226
• Interfaces
• 2x POTS -- SIP, SIP-PLAR & MGCP
• 6 GE LAN ports
• Active GE uplink (SFP cage) or
• GPON uplink
• USB Port
• Packet Handling
• IGMP Snooping / IP Video support
• Wirespeed routing or bridging
• PPPoE Client
• Full QoS, VLANs, Rate Limiting
• Q-in-Q
• Management
• ZMS CPE Manager support
• SNMP Traps & interface stats
• HTTP/HTTPS browser interface
• Physical / Environmental
• Extended Temp
• Corning outdoor enclosure
• 12V power (7-pin interface)
Released the zNID-94xx family of ONTs
zNID-GE-9488 8 POTS, 9 GE LAN w/PoE, 8 T1/E1
zNID-GE-9480 0 POTS, 9 GE LAN w/PoE, 8 T1/E1, 1588v2
zNID-GE-9444 4 POTS, 5 GE LAN w/PoE, 4 T1/E1
zNID-GE-9440 0 POTS, 5 GE LAN w/PoE, 4 T1/E1, 1588v2
zNID-GPON-9488 8 POTS, 9 GE LAN w/PoE, 8 T1/E1
zNID-GPON-9480 0 POTS, 9 GE LAN w/PoE, 8 T1/E1, 1588v2
zNID-GPON-9444 4 POTS, 5 GE LAN w/PoE, 4 T1/E1
zNID-GPON-9440 0 POTS, 5 GE LAN w/PoE, 4 T1/E1, 1588v2
zNID 94xx MDU
Full Gateway Features
• Bridging/Switching/Routing
– DHCP, NAT/NAPT, DDNS, PPPoE, IP Multicast
– “Per-VLAN Services” – each VLAN can be configured for Bridging, Routing, or PPPoE
• QoS
– 802.1p and DSCP marking and queuing
– Traffic shaping on both downstream and upstream traffic
• VoIP
– MGCP, SIP and SIP-PLAR
• Firewall
– Port forwarding, Access Control List, Management Access Control, ALG’s, DMZ
• Logging
– VoIP, IGMP, System, Firewall, QoS
zNID Management
• Web GUI
• ZMS CPE Manager
• CLI
• OMCI
• TR-069 (Q2, 2012)
zNID Diagnostics – GPON Status
• One screen shows critical status & alarm information for the GPON uplink
– Link Up counter
– ONU ID
– Receive Power Level
– Transmit Power Level
– Internal Diplexer temp (much hotter than ambient)
• Same screen show GPON Alarms
zNID Diagnostics – GPON Statistics
• One screen shows all available GPON Statistics
– Tx & Rx Counters for 5xx Data GEM, and also for the multicast video GEM
– Error counters
– PLOAM message counters
zNID Diagnostics – Voice Line Status
• One screen shows critical status information for every voice interface
– Registration Up/Down
– Hook State
– RTP Packet Stats
– Incoming Call Counters
– Outgoing Call Counters
zNID Diagnostics – Call Audit Log
• Two Rotating Call Audit Logs are maintained
– Every completed incoming or outgoing call is logged, along with duration and remote phone number when available.
– This list can be filtered to show the log stats for any one line, but the two rotating logs always contain the stats from all lines.
zNID Diagnostics – VoIP Signaling Packet Logs
• VoIP Signaling Logs
– Two rotating log files.
– Every outbound signaling packet to the switch is captured, and the corresponding response from the switch
– Presented as shown in two columns, making it very easy to analyze.
– This is basically a built in wireshark feature for VoIP signaling packets only. RTP not included.
– VERY useful for remote debug of voice issues.
Packet Sent To Switch Packet Received from Switch
>>>>> Sent 759 bytes from 10.104.30.96:5060 to 0.0.0.0:0 >>>>>
At time Fri Feb 24 09:14:33 2012
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.104.38.1:5060;branch=z9hG4bKc66e8b90c43dfef8c
6fbda4c9619c34d
From: 4024 <sip:[email protected]>;tag=40849136251ae3ff1d
To: 4024 <sip:[email protected]>;tag=746830164
Call-ID: [email protected]
CSeq: 1 INVITE
Allow: INVITE, ACK, CANCEL, BYE, NOTIFY, REFER, OPTIONS, UPDATE,
PRACK, INFO
Contact: Line4 <sip:[email protected]:5060;transport=udp>
Privacy: none <<<<< Recv 393 bytes from 10.104.38.1:5060 to 10.104.30.96:5060 <<<<<
Supported: timer, replaces At time Fri Feb 24 09:14:33 2012
Content-Type: application/sdp ACK sip:[email protected]:5060;transport=udp SIP/2.0
Content-Length: 249 From: 4024 <sip:[email protected]>;tag=40849136251ae3ff1d
To: 4024 <sip:[email protected]>;tag=746830164
v=0 Via: SIP/2.0/UDP 10.104.38.1:5060;branch=z9hG4bKc66e8b90c43dfef8c
o=MxSIP 0 0 IN IP4 10.104.30.96 6fbda4c9619c34d
s=SIP Call Call-ID: [email protected]
c=IN IP4 10.104.30.96 CSeq: 1 ACK
t=0 0 Max-Forwards: 70
m=audio 23860 RTP/AVP 0 8 18 User-Agent: malcT1E132Vg - MALC 1.16.4.303
a=rtpmap:0 PCMU/8000 Content-Length: 0
zNID Diagnostics – SIP RTCP Statistics
zNID Diagnostics – System Log
• System Log
– Log Level is configurable (Notice, Error, Debug, Informational) and so is display level
– Remote Syslog is supported for debug of field issues
– Alarm events, Link Up/Down events, Loss of Voice Registration, Task shutdowns & restarts, User Logins, IP Address acquisitions, etc. all recorded in the System Log as shown below
zNID Diagnostics – Ethernet Port Status
• Ethernet Interface Statistics.
– Bytes, Frames, Errors, & Drops
recorded in Tx and Rx directions
on every physical port.
– Tx is always relative to the
physical port. Tx on an uplink =
upstream traffic. Tx on a LAN
port = downstream traffic.
– Reset feature provided to clear
the stats during troubleshooting.
• Ethernet Interface Status.
– Physical status of each LAN port
zNID Diagnostics – Bridge & IGMP Tables
• VLAN Bridge Table.
– Records every learned Source MAC per VLAN &
Interface.
– Total Bridge Table size is 4096
– Table will display up to 1024 entries
• IGMP Group Membership Table
– Displays all Multicast Group IPs that have been
joined, by VLAN, interface, IP & MAC.
– Shows expiration timer value – counts down.
– When a Query is received and responded to, the
timer value will get reset to its max value.
Integrated HPNA Test Mode
• Version 2.3.127 SW adds support for integrated HPNA Test Mode
– Disruptive Test, designed to be run at initial time of installation to verify proper cabling and terminations. See HELP description below from 42xx GUI
Integrated HPNA Test Mode
• Version 2.3.127 SW adds support for integrated HPNA Test Mode
– Works with Zhone HPNA Adapters running 1.7.5 SW, as well as other vendor Adapters running newer HPNA SW.
– Every HPNA device sends traffic to every peer device & reports the results.
– In a normal installation, PER should be 0.00% for ALL connections, and rate should be 112Mbps or higher
Recommended HPNA Adapter
• Alpha Telecom
– 555-HPCE-522U
– Sales Contact:
• Robert Soong [email protected] (408)895-1801
zNID-422x Family of ONTs
Model Description
ZNID-GE-4220 Outdoor, GE Uplink, 2 POTS, 2 GE
ZNID-GE-4222 Outdoor, GE Uplink, 2 POTS, 2 GE, HPNA-C
ZNID-GE-4224 Outdoor, GE Uplink, 2 POTS, 2 GE, HPNA-C, HPNA-P
ZNID-GE-4226 Outdoor, GE Uplink, 2 POTS, 6 GE
ZNID-GPON-4220 Outdoor, GPON Uplink, 2 POTS, 2 GE
ZNID-GPON-4221 Outdoor, GPON Uplink, 2 POTS, 2 GE, RFV
ZNID-GPON-4222 Outdoor, GPON Uplink, 2 POTS, 2 GE, HPNA-C
ZNID-GPON-4223 Outdoor, GPON Uplink, 2 POTS, 2 GE, HPNA-C, RFV
ZNID-GPON-4224 Outdoor, GPON Uplink, 2 POTS, 2 GE, HPNA-C, HPNA-P
ZNID-GPON-4226 Outdoor, GPON Uplink, 2 POTS, 6 GE
zNID-424x Family of ONTs
Model Description
ZNID-GE-4240 Outdoor, GE Uplink, 4 POTS, 2 GE
ZNID-GE-4242 Outdoor, GE Uplink, 4 POTS, 2 GE, HPNA-C
ZNID-GE-4244 Outdoor, GE Uplink, 4 POTS, 2 GE, HPNA-C, HPNA-P
ZNID-GPON-4240 Outdoor, GPON Uplink, 4 POTS, 2 GE
ZNID-GPON-4241 Outdoor, GPON Uplink, 4 POTS, 2 GE, RFV
ZNID-GPON-4242 Outdoor, GPON Uplink, 4 POTS, 2 GE, HPNA-C
ZNID-GPON-4243 Outdoor, GPON Uplink, 4 POTS, 2 GE, HPNA-C, RFV
zNID-9xxx Family of ONTs
Model Description
ZNID-GE-9488 Outdoor, GE Uplink, 8 POTS, 9 GE w/PoE, 8 T1/E1
ZNID-GE-9480 Outdoor, GE Uplink, 0 POTS, 9 GE w/PoE, 8 T1/E1, 1588v2
ZNID-GE-9444 Outdoor, GE Uplink, 4 POTS, 5 GE w/PoE, 4 T1/E1
ZNID-GE-9440 Outdoor, GE Uplink, 0 POTS, 5 GE w/PoE, 4 T1/E1, 1588v2
ZNID-GE-9208 Outdoor, GE Uplink, 8 POTS, 9 GE w/PoE, 8 MoCA
ZNID-GE-9108 Outdoor, GE Uplink, 8 POTS, 9 GE w/PoE
ZNID-GPON-9488 Outdoor, GPON Uplink, 8 POTS, 9 GE w/PoE, 8 T1/E1
ZNID-GPON-9480 Outdoor, GPON Uplink, 0 POTS, 9 GE w/PoE, 8 T1/E1, 1588v2
ZNID-GPON-9444 Outdoor, GPON Uplink, 4 POTS, 5 GE w/PoE, 4 T1/E1
ZNID-GPON-9440 Outdoor, GPON Uplink, 0 POTS, 5 GE w/PoE, 4 T1/E1, 1588v2
ZNID-GPON-9308 Outdoor, GPON Uplink, 8 POTS, 9 GE w/PoE, 8 MoCA, 8 RF
ZNID-GPON-9208 Outdoor, GPON Uplink, 8 POTS, 9 GE w/PoE, 8 MoCA
ZNID-GPON-9108 Outdoor, GPON Uplink, 8 POTS, 9 GE w/PoE
GPON Indoor ZNIDS
GPON Outdoor ZNIDS
Active Ethernet ZNIDS
FTTN – Fiber to the Node
• Leverage existing copper infrastructure
• Subscribers keep existing CPE
• High bandwidth over existing copper plant
100Mbps bidirectional
45Mbps downstream with
bonded loops
90Mbps bidirectional with
bonded loops
Active
Ethernet
VDSL
Active
Ethernet
ADSL
Active
Ethernet
EFM SHDSL
FTTN – Fiber to the Building
100Mbps bidirectional
45Mbps downstream with
bonded loops
90Mbps bidirectional with
bonded loops
Extend reach of network
using fiber
Increase speeds by
shortening copper loops
Active
Ethernet
VDSL
Active
Ethernet
ADSL
Active
Ethernet
EFM SHDSL
SLMS FTTX Products
• Zhone’s 1U SLMS Portfolio (XP and MX) is designed as a small form-factor, high-performance access platform, providing uncompromised performance for every access subscriber
• 1U SLMS portfolio is based on native packet processing/switching architecture with non-blocking switching capacity
More Choice of Services
(voice/video/data)
• 1U SLMS Versions:
• MALC-XP or MXP
• Multi-Service Access Node (MSAN) - supports POTS voice, Video and differentiated IP-based Data over Ethernet link/ring
• Raptor-XP or MX
• IP-DSLAM or ONU supporting Video and differentiated IP-based Data Services over Ethernet link/ring
DSLModems
&FE ONTs
SUBSCRIBER
VOICE • DATAENTERTAINMENT
FiberRPR or
EAPS RINGCopper
MXK
Lower TCOQuicker ROI
MXP-180-TP-RJ4524-PORT FE (RJ45), 24 POTS/VOIP, 4 FE/GE
1U SLMS MXP-180-TP-RJ45
• MXP-180-TP-RJ45
• 1U high (Front and Rear LEDs)– 17.4 in x 11.3 in.
– 442 mm x 237 mm
• Uplink Options– 4x FE/GE ports
• Active Ethernet Support– 24 RJ45 Fixed Copper Ports (10/100BT)
• Voice (VoIP) Support– 24 POTS
• Web GUI – Intuitive Web Interface for device
configuration, monitoring & management
MXP-280-TP-RJ4524-PORT FE (RJ45), 24 POTS/VOIP, 3 FE/GE. 1 GPON
1U SLMS MXP-280-TP-RJ45
MXP-280-TP-RJ45• 1U high (Front and Rear LEDs)
– 17.4 in x 11.3 in.
– 442 mm x 237 mm
• Uplink Options
– 3x FE/GE + 1 GPON ports
• Active Ethernet Support
– 24 RJ45 Fixed Copper Ports (10/100BT)
• Voice (VoIP) Support
– 24 POTS
• Web GUI
– Intuitive Web Interface for device configuration, monitoring & management
NO/NC
Alarm
Outputs
SFP Cages
for Copper/Fiber
FE/GE Uplinks
Dual -48 VDC
Power Connector
NO/NC
Alarm
Inputs
Key Differentiators
• Hardware• Non-blocking• Dual Power Inputs• Up to 4 Alarm Inputs• More Uplink ports
– GPON Uplink (280)
• Removable Fan Tray• Versions with fixed RJ45 for
customers deploying the product as an MDU GPON or AE ONU with Fast Ethernet and POTS interfaces
– Customers will not incur an extra $1,200 (24 x $50 for each copper FE SFP)!
• Software– Full ZMS support– Up to 16K MAC Address learning– Link Agg, RSTP
• CPE Manager support
MALC-XP-150A Models
• 1U high (Front and Rear LEDs)
• 17.4 in x 11.3 in.
• 442 mm x 237 mm
• Uplink Options
• 2x FE/GE ports
• DSL Support
• 48 ADSL2+ Ports Annex A
• Voice (VoIP) Support
• 48 POTS
• Web GUI
• Intuitive Web Interface for device configuration, monitoring & management
• Test access and control on unit rear
• MALC-XP-150A48-PORT ADSL2+, 48-PORT POTS/VoIP, 2 FE/GE
• 1U high (Front and Rear LEDs)
• 17.4 in x 11.3 in.
• 442 mm x 237 mm
• Uplink Options
• 3x FE/GE ports + 1 GPON
• DSL Support
• 24 VDSL2 Ports (up to 30a profile)
• POTS Splitters
• Optional 600/900 Ω splitters
• Web GUI
• Intuitive Web Interface for device configuration, monitoring & management
MX-26024-PORT VDSL2, NO SPLITTERS, 3 FE/GE, 1 GPON
MX-26124-PORT VDSL2, 600 Ohm SPLITTERS, 3 FE/GE, 1 GPON
MX-26224-PORT VDSL2, 900 Ohm SPLITTERS, 3 FE/GE, 1 GPON
MX-260
1U SLMS MX-260
Hardware
• Broadcom-based (30a)
• Dual Power Inputs
• Up to 4 Alarm Inputs
• More Uplink ports
• GPON Uplink (260)
• Port Status LEDs
• Removable Fan Tray
Software
• SRA – Seamless Rate Adaptation
• ADSL2+ Fallback
• Full ZMS support
• Up to 16K MAC Address learning
• Link Agg, RSTP and EAPS
Key Differentiators MX-160/260
NO/NC
Alarm
Outputs
SFP Cages
(45 degree) for
Copper/Fiber
FE/GE Uplinks
Port
Status
LEDs
Dual -48 VDC
Power Connector
NO/NC
Alarm
Inputs
1U SLMS MX-160/MX-260
• 1U high (Front and Rear LEDs)
• 17.4 in x 11.3 in.
• 442 mm x 237 mm
• Uplink Options
• 3x FE/GE ports + 1 GPON
• DSL Support
• 24 VDSL2 Ports (30a profile)
• Voice (VoIP) Support
• 24 POTS
• Web GUI
• Intuitive Web Interface for device configuration, monitoring & management
MXP-26024-PORT VDSL2, 24 POTS/VoIP, 3 FE/GE, 1 GPON
MXP-260
1U SLMS MXP-260
Hardware
• Non-blocking
• Dual Power Inputs
• Up to 4 Alarm Inputs
• More Uplink ports
• GPON Uplink (280)
• Removable Fan Tray
Software
• Full ZMS support
• Up to 16K MAC Address learning
• Link Agg, RSTP and EAPS
Key Differentiators MX-180/280
NO/NC
Alarm
Outputs
SFP Cages
for Copper/Fiber
FE/GE Uplinks
Dual -48 VDC
Power Connector
NO/NC
Alarm
Inputs
1U SLMS MX-180/MX-280
• 1U high (Front and Rear LEDs)
• 17.4 in x 11.3 in.
• 442 mm x 237 mm
• Uplink Options
• 3x FE/GE ports + 1 GPON
• Active Ethernet Support
• 24 SFP-based Ports (FE only)
• Voice (VoIP) Support
• 24 POTS
• Web GUI
• Intuitive Web Interface for device configuration, monitoring & management
MXP-280
MXP-28024-PORT FE (SFP), 24 POTS/VOIP, 3 FE/GE, 1 GPON
1U SLMS MXP-280
ZMS – Managing the 1U SLMS Network
• Provides full suite of FCAPS management capabilities
– Fault, Configuration, Performance, User Admin, Database Mgmt, Network Service, Software Upgrade
– Designed to Manage Large Networks
– Operates on Solaris OS
– OSS Gateway for interface into 3rd party systems
OPX4300 Quick Reference
Supports up to 300 Ports
Includes:
• 1 cabinet
• W 32" x D 19" x H 26“
• W 32" x D 19" x H 40.5“ (w/ battery
pedestal)
• 6RU of internal space
• Power Options - DC, AC or LP
• Can be configured for up to 300 ports
• 150 Ports if using integrated
splitters
• Actual number of protectors
depends on actual ordered
configuration
• Optional T1 protection / cross connect
panel
• Air Filters/Fans or Heat Exchanger
• Battery Pedestal (different model)
Options for:
• 5-pin Protectors
• Battery Heater
• Battery String
• Generator Inlet/AC Transfer Switch
Supports up to 200 Ports
Includes:
• 1 cabinet
• W 22" x D 19" x H 26“
• W 22" x D 19" x H 40.5“ (w/
battery pedestal)
• 4RU of internal space
• Power Options - DC, AC or LP
• Can be configured for up to 200 ports
• 100 Ports if using integrated
splitters
• Actual number of protectors
depends on actual ordered
configuration
• Optional T1 protection / cross connect
panel
• Air Filters/Fans or Heat Exchanger
• Battery Pedestal (different model)
Options for:
• 5-pin Protectors
• Battery Heater
• Battery String
• Generator Inlet/AC Transfer Switch
OPX 4300 4U OPX 4300 6U
Supports up to 100 Ports
Includes:
• 1 cabinet
• W 15" x D 15.5" x H 26“
• W 15" x D 15.5" x H 40.5“ (w/
battery pedestal)
• 1RU of internal space
• Power Options - DC, AC or LP
• Can be configured for up to 100 ports
• 50 Ports if using integrated
splitters
• Actual number of protectors
depends on actual ordered
configuration
• Optional T1 protection / cross connect
panel
• Air Filters/FAns or Heat Exchanger
• Battery Pedestal (different model)
Options for:
• 5-pin Protectors
• Battery Heater
• Battery String
• Generator Inlet/AC Transfer Switch
OPX 4300 1U
zPON Product Family
• PON Splitters
• EDFA
• RF transmitters
• WDM Combiners
Copper Services
Flexible Broadband Copper Solutions
ADSL
• 72 port
• 48 port + POTS
• 48 port + Splitter
VDSL
• 24 port
• 24 port + POTS
• 24 port + Splitter
EFM
• 24 port SHDSL
• 24 port T1
MXK Line Cards
ADSL
• 48 port
• 48 port + POTS
• 48 port + Splitter
VDSL
• 24 port
• 24 port + POTS
• 24 port + Splitter
EFM
• 24 port SHDSL
1U MX
Flexible Narrowband Copper Solutions
POTS
• 72 port
ISDN (2B1Q and 4B3T)
• 24 port
EBS/POTS
• 24 Ports
T1/E1 PWE
• 24 port T1/E1
MXK Line Cards
VDSL Performance
• VDSL2 uses DMT (Discrete Multi-Tone) and is spectrally compatible with ADSL2+, if sharing binder group
• VDSL2 30a utilizes up to 30MHz to deliver 100/100 Mbps
• VDSL2 utilizes EFM (Ethernet Framing) and delivers 15% improvement over ADSL2+ by avoiding ATM cell tax
0 20 40 60 80 100
ADSL2+ Upstream
ADSL2+ Annex M Upsteam
ADSL2+ Downstream
VDSL2 17a Upstream
VDSL2 30a Upstream
VDSL2 30a/17a Downstream
VDSL2 vs ADSL2+
Mbps
VDSL Performance
• VDSL2 outperforms ADSL2+ up to 2km (6500 feet)
Modem - 6718
• VDSL2 with ADSL2+ fallback
• Ethernet WAN and 4 Ethernet LAN
• USB
• 802.11n WiFi
Model WAN Eth WAN LAN USB WiFi Bonded Voice
6631 xDSL - 1 FE 1 - - -
6632 xDSL Configurable 4 FE 1 - - -
6638 xDSL Configurable 4 FE 1 2x2; 200mW*
- -
6638B** xDSL Configurable 4 FE 1 2x2 200mW*
Yes -
* ODM Waiting for Broadcom Reference Design
** VDSL2 Bonded support profile 8 and 12 only
VDSL2 Modems
MXK VDSL2 CardREV 1
• 24 port VDSL2 Single Slot
• 24 Dual slot with Splitter and combo
• Broadcom based
• Supports 17a profile
• Supports ADSL fallback mode
• VDSL2 Bonding (future)
• Supports auto power adjustment to reduce power consumption
• Compliant G992.1, 992.3, G992.2 (G lite), G 993.2 (VDSL2)
• Phy-R based INP protection
Single Slot VDSL Combo
• 24 port VDSL2 Single Slot combo
• VDSL – Broadcom based
– Supports 17a profile
– Supports ADSL fallback mode
– VDSL2 Bonding (future)
– Supports auto power adjustment to reduce power consumption
– Compliant G992.1, 992.3, G992.2 (G lite), G 993.2 (VDSL2)
– Phy-R based INP protection
• 24 port VDSL2 Single Slot combo
• POTS– Integrated Test
– On Board Ringer support
– Long Reach SLIC
Integrated Test POTS Test Options
• Three Element Capacitance Test
• Three Element Insulation Resistance
• Foreign AC Voltage Test
• Foreign DC Voltage Test
• Receiver Off-Hook
• DC Loop Resistance Test
• Foreign AC Currents Test
• Read Loop And Battery Condition
• Howler Test
• Transmission Self-Test
• Metering Self-Test
• Ringing Monitor Test
• Ringing Self-Test
• On/Off Hook Self Test
• DC Feed Self-Test
• Trans-Hybrid Loss
• Tone Generation Test
• Noise Measurement Test
• DTMF and Pulse Digit Measurement
• Ringer Equivalency Number Test
• Distance to Open Test
Single Slot VDSL Combowith Vectoring
• Solution uses Latest Broadcom slot vectoring technologies
• Support 17a
• Support for G.Vector ITU-T G.933.5
• Support for Phy-R and G.INP for Noise protection Retransmission
• Fully compatible with existing VDSL card and solution
• Support for Bonding
• ADSL fall back
• POTS support integrated no external cable required
• 50 Pin Chap design
48 port VDSL Line card
• High Density VDSL Solution 48 ports
• Expected out end of Q1
• Solution uses Latest Broadcom slot vectoring technologies
• Support 17a
• Support for G.Vector ITU-T G.933.5
• Support for Phy-R and G.INP for noise protection Retransmission
• Fully compatible with existing VDSL card and solution
• Support for Bonding
• ADSL fall back
• POTS support integrated no external cable required
• 50 Pin Chap design
Vectoring Solution
• Card level coming first -24/48 port
• Working Closely with Broadcom
• Looking at Vectoring engine card or standalone 1U
Lab testing
TDM Switch Migration
Multiple VoIP Protocols
• The MXK POTS cards (including VDSL+POTS and ADSL+POTS) support SIP, MGCP, and H.248.
EFM SHDSL Benefits
• Symmetrical Bandwidth– Business needs are the same up
and down stream
– Native Ethernet
– Simple Layer 2 approach
– VLANs replace PVCs
• Loop Bonding– Re-use copper pair in place
– Higher bandwidth – single connection
– Scalable – add pairs when needs grow
– Create more service tiers
– Solves problem of costly fiber installs when more bandwidth is demanded
• No encapsulation overhead– IP services transported on Ethernet with
no ATM encapsulation
• No network re-build– EFM aggregation requires only moving copper at
distribution frame
– Same switches & routers used
– Customer replaces CSU/DSU with EAD & connects directly to their Ethernet switch or hub router
• Flexibility & Reliability– Hitless add/drops of bonded pairs
– Pairs with unequal performance. quality can be bonded – achieve aggregate bandwidth
– If one pair goes down, bond group stays up
– Traffic is synchronized across one, single link
• Simplicity & Ease– Requires little equipment
– Factory pre-provisioned for plug & play
– Installs in minutes
– Turn up rapid & simple
ETHX-REPEATER Advantage
• Extend loop to reach far-off customers
– Like all DSL technologies, SHDSL speeds drop with increased distance and fails to work with long loops
– Repeaters can expand the sphere of reachable customers from the CO
• Increase speed by shortening loop segments
– A subscriber may be reachable without a repeater, but the loop distance prevents training at the desired speed
– A repeater will split the loop into two or more segments and each shorter segment will train at a higher rate than the original long loop.
ETHX-REPEATER Card
• Designed to fit type 239 enclosure
• DIP switch manages line power. No other programming required.
– Position1 – Power fed from subscriber side. Do not allow power to continue to next segment.
– Position 2 – Forward power to next segment.
– Position 3 – Power fed from network side. Do not allow power to continue to next segment.
• Each repeater supports two pairs.
• Up to 8 repeaters on a pair
Zhone FiberCell Mobile Backhaul
Supporting EFM, TDM over Fiber and Ethernet over Fiber
Zhone FiberCell Mobile Backhaul Solution
New MXK Uplink Card
• New uplink card for additional timing over packet
– 2X10G + 8X1G
– 2X10G + 8X1G + TOP
• 10Gig interfaces support SFP+
• TOP includes
– Synchronous Ethernet
– IEEE 1588v2
– CLOCK input (BITS or T1)
– 1PPS input
– GPS input
GPON Access with 1588v2 uplinks
• Timing source comes in from the MTAC on Master MXK via a T1/E1
• 1588 Timing packets are sent to other slave MxKs over Ethernet
• Timing is then sent down GPON to zNID and to MxK PWE cards (frequency, TOD and Phase)
• T1/E1 clocks out of the ZNID/PWE Card and the timing source are synchronous
ZNIDMxK MxK
PON
Fiber
T1/E1 T1
Ethernet
RAN BS RAN NC1588v2 1588v2
Frequency source from 1588
Ethernet
Frequency source from 1588
ZNIDMxK MxK
Ethernet FiberT1
T1
Ethernet
RAN BS RAN NC
Frequency, TOD and Phase source from
1588
1588v2 1588v2
Frequency source from 1588
Ethernet with PWE & 1588v2 uplinksZNID with 1588v2
• Timing source comes in from the MTAC on Master MXK via a T1/E1
• 1588 Timing packets are sent to other slave MxKs and zNIDs over Ethernet
• Timing is then sent down the GPON to zNID and to MxK PWE cards (frequency, TOD and phase)
• T1/E1 clocks out of the zNID/PWE Card and the timing source are synchronous
Zhone Manage System Overview
Powerful, scalable management and integration
Carrier OSS/BSS • Single integration to manage complete access network
Zhone OSS Gateway
• Powerful client-server architecture
• Flexible and completely programmable
• Function calls to all of ZMS
ZMSElement Management System
• Manage all Zhone network elements with one tool
• Service definition, control, and reporting
Web GUI, CLI, scripts
• Direct configurationinterface
• Easy-to-use GUI
• Powerful CLI & scripts forautomation
ZMS
• Scalable client/server platform
• High Availability and Disaster Recovery
• ZMS Virtual Appliance
• Flexible automated service provisioning model
• Comprehensive Set of Management Functions
• Faults
• Configuration
• Management reports
• Performance
• User Access Control
ZMS Client - NetHorizhon
• Java application downloaded from server
– Windows
• Operator GUI access to management functions
– Navigation Tree
– Graphical representation objects
• Assigned privileges control ‘read’ or ‘read/write’ access
• Intuitive and easy to navigate
• Extensive on-line help for operations
• Large number of clients can manage network simultaneously
ZMS Server Architecture
• Highly scalable
• Oracle J2EE infrastructure
– Solaris
– WebLogic
– Oracle Database
– Java
• Runs on SPARC and x86 hardware platforms
Fault Management
Service BEAN
Configuration
Service BEAN
OSS XML Gateway
Service BEAN
Oracle SQL Server
JAVA Web Start Servlet
JDBC
JMS
OSS CORBA Gateway
Service BEAN
Solaris Operating System
Oracle Hardware ( X.86, SPARC)
SOAP
Oracle RAC Oracle DataGuard
Dump/Restore
Service BEAN
Network Services
BEAN (SNMP)
Administration
Services BEAN
Dump/Restore
Service BEAN
Config
Synchronization
Service BEANPerformance
Service BEAN
High Availability Cluster with Disaster Recovery
Network (Net Horizon clients, MXKs, OSS)
Node1VIP1
ZMS Services
+ OSS Gateway
VIP2
WebLogic Server
Oracle DB/RAC
+ DataGuard
Solaris
Storage
Network
Primary Site
Node2
ZMS Services
+ OSS Gateway
VIP3
WebLogic Server
Oracle DB
+ DataGuard
Solaris
Heartbeat
Network
Node3
Back-up Site
Application Cluster
Database Cluster
ZMS Services
+ OSS Gateway
WebLogic Server
Oracle DB/RAC
+ DataGuard
Solaris
ZMS Fault Management
• Proactive monitoring of network and subscriber status
– Trap and alarm viewer
• Presenting operator with concise and relevant information
– Filtering & Forwarding
• Data presentation for real-time and historical analysis
– Viewer and history logs
ZMS Fault Management
• Alarm processing
– ILOG JRules based engine
– User definable severity and descriptions
• Critical –Red
• Major- Red Orange
• Minor- Orange
• Warning – yellow
• Informational - white
• Alarm details
• Severity
• Device
• Time when received in ZMS
• Description (user definable)
• Troubleshooter
• Type (Entity that generated alarm- card, device, port, etc.)
• Forwarding to OSS applications
• Email and text messaging based on severity
ZMS Configuration – Auto-Discovery Tool
• Rapid Installation and Turn-up of Devices– Automatic device discovery
• Cards
• Any existing services
– Synchronization of device configuration
– Bulk deployment of IO cards per device
– Bulk configuration of ports
• User definable port templates
– Monitoring of shelf operational status
• Administrative status
• Memory and CPU usage
• Power
• Temperature range
• Fan speed
• Software versions
• CLEI, Serial #’s, Revision #’s
ZMS – Configuration – SW Delivery Tool
• Enhanced Software Delivery Tool that provides the capability of downloading software to all devices in the network
– Single or Multiple Devices
– Device sub-directory (needs to be created in advance in the device)
– Filename extension (*.old)
– Auto Flash
– Auto Reboot/Upgrade
– Immediate - Starts the immediate software download for the selected devices.
– Schedule - Specified the desired time and date to schedule the software download for the selected devices.
ZMS Configuration – Scheduled Backups
• Immediate and scheduled configuration backups on single and multiple devices
• Options:
– Disable - Disables the configuration backup for the selected devices.
– Immediate - Starts the immediate configuration backup for the selected devices.
– Daily - Specified the desired time and select the day to schedule the configuration backup for the selected devices.
– Weekly - Specify the desired time and select the day to schedule the configuration backup for the selected devices.
ZMS Configuration – Network Inventory Tool
• ZMS enables the display of inventory data for one or more specific devices
– Device Name
– Module Name
– Shelf ID
– Slot ID
– SW Version
– HW Version
– Part Number
– Serial Number
• Filter data Feature
• Export data Feature– CSV file
• Inventory Details– Double-click device for
more detailed information
ZMS – Service Provisioning
• Service Templates
– Minimizes service turn-up times significantly
– Pre-configured network wide
– Turn-up requires only selection of unique entities, physical interfaces, VPI/VCI, etc.
– Single service or pre-provision service across entire device
• Bulk modify of service parameters
ZMS Configuration - Dynamic OMCI GPON Provisioning
• OMCI CPE Profiles for all GPON types
• Layer 2 Features
– Data
– Video
• Voice
– H.248 (CIG only)
– SIP
– MGCP (Zhone only)
ZMS/OSS
GWY
SNMP
GPON OMCI Profiles
MXK
GPON
ONT
OMCI OMCI
OSS/BSS
XML / CORBA
GPON
ONT
ZMS Configuration – Common CPE Provisioning Model
• Layer 2
• Layer3/RG
• Supports pre and post service provisioning
• Supports default configurations
• Supports SW upgrades
• OSS GWY access to CPE profiles
ZMS/OSS
GWY
SNMP
CPE Profiles
MXK
AE
ONT
GPON
ONT
SNMP OMCI
OSS/BSS
XML / CORBA
ZMS – Performance Management
• Real-time and historical Monitoring
– System metrics
– Service metrics
• Ethernet
• PON
• Voice
• Sonet
• DSL
• ATM logical
• ATM VCL
• Tabular and graphical presentation
• User definable polling
ZMS Performance
• Ethernet Statistics– Received Packets/Bytes– Transmitted Packets/Bytes– Discarded Packets/Bytes– Received per packet size– Transmitter per packet size– Multicast/broadcast packets– FCS Errors
• Information available on a per-port basis
– Uplink FE/GE/10GE ports– Active Ethernet ports– Link Aggregation ports– OLT GPON ports
• Both table and graph formats
• Adjustable polling interval
ZMS Security – User Administration
• System Administrator
– Create groups
– Assign operators to a group
– Assign ‘read/write’ privileges to various operations
• Audit logging
– Logging by day
• Operator
• Date and time of operation
• Type of operation
• Success or failure
• Device
• Managed entity
ZMS Security – User Groups
• Operator
– Authentication – ‘Login ID’ and ‘Password’
– Authorization – ‘read’ or ‘read/write’ privileges can be assigned to various areas by administrator
– Access areas
• Region Configuration
• Equipment Configuration
• Service Provisioning
• Alarm Administration
• Access to Diagnostic functions
Administrator
Group 3Group 2Group 1
Operator 1 Operator 2 Operator 3
Region
Prov (RW)
Equipment
Prov (RW)
Subscriber
Prov (R)
Alarm
admin (R)
Diagnostics
(Enabled)
Subscriber
Prov (RW)
Alarm
admin (RW)
Diagnostics
(Enabled)
Equipment
Prov (RW)
Alarm
admin (RW)
Diagnostics
(Enabled)
Customer Premises Equipment (CPE)
Zhone Customer Premises Equipment
Zhone CPE Product Overview
• Zhone has a full line of CPE
– Differentiated features that have a direct impact and value to the service provider
– Standards PLUS offerings
– Broad Interoperability
• Applications supported
– Residential
• Data
• Voice, Video + Data
– Business
• Business-Class Data
• Business-Class Voice + Data
– Hospitality
• Data
• Video + Data
Zhone CPE Feature Overview
• WAN Options
– ADSL, ADSL2+, ReachDSL
– SHDSL, Extended Rate SHDSL (4-wire)
– VDSL2 (Profile 17a)
• LAN Options
– WiFi: 802.11b/g/n
– Multi-Port Switches
– Voice Ports: VoIP
• SIP
• Full Featured Combinations
– DSL, FXS Ports, Wi-Fi, 4 port switch in a single unit
Residential - Applications
Data and Video
ADSL2+, VDSL2/ADSL2+
Bridged or Routed
4 port Ethernet
WiFi
High Speed Data
ADSL, ADSL2+, ReachDSL,
SHDSL, VDSL
Bridged or Routed
1 or 4 port Ethernet
WiFi
Data, Voice and Video
• VDSL2/ADSl2+
• Bridged or Routed
• 4 port Ethernet
• WiFi
• IAD with 2 FXS Ports (SIP)
Hospitality - Applications
Packages with 1U DSLAMs and CPEs are very popular with hospitality accounts
Data
ADSL2+ single modem
WiFi in public places
Data and Video
Bridged or Routed
4 port Ethernet
WiFi
Residential 15xx DSL CPE (Broadcom)
1511 (Single Port)
• 10/100BT Port RJ-45
• ADSL2+ Port
• Annex M support
• Annex L support
• RFC 1483/2684
• PPPoA / PPPoE
• RIP v1/v2/Static Routing
• Stateful Firewall Inspection
• NAT
• PPP with PAP/CHAP
• CLI/Web Management/TR-
069
• Order code: 1511-A1-xx
• 4 10/100BT RJ45 Ports
• ADSL2+ RJ11 Port
• Annex M support
• Annex L support
• Annex B support
• RFC 1483/2684
• PPPoA / PPPoE
• RIP v1/v2/Static Routing
• Stateful Firewall Inspection
• NAT
• PPP with PAP/CHAP
• CLI/Web Management/TR-069
• Simultaneously Bridge/Route on
individual 10/100BT Ports
• Order Code: 1512-A1-xx (Annex A)
• 1512-B1-xx (Annex B)
1512 Multi-Port1518 Multi-Port WiFi 802.11B/G
• 4 10/100BT RJ45 Ports
• ADSL2+ RJ11 Port
• Annex M support
• Annex L support
• 802.11b/g
• RFC 1483/2684
• PPPoA / PPPoE
• RIP v1/v2/Static Routing
• Stateful Firewall Inspection
• NAT
• PPP with PAP/CHAP
• CLI/Web Management/TR-069
• Simultaneously Bridge/Route on
individual 10/100BT Ports
• Order Code: 6218-I4-200
xx – Denotes Adapter model
NA for North America,
EU for Euro
UK for United Kingdon
JP for Japan
Residential 65xx ADSL CPE (Broadcom) With Integrated Phone Filter
• 10/100BT Port RJ-45
• ADSL2+ Port
• Annex M support
• Annex L support
• RFC 1483/2684
• PPPoA / PPPoE
• RIP v1/v2/Static Routing
• Stateful Firewall Inspection
• NAT
• PPP with PAP/CHAP
• CLI/Web Management/TR-
069
• Order code: 1511-A1-xx
• 4 10/100BT RJ45 Ports
• ADSL2+ RJ11 Port
• Annex M support
• Annex L support
• Annex B support
• RFC 1483/2684
• PPPoA / PPPoE
• RIP v1/v2/Static Routing
• Stateful Firewall Inspection
• NAT
• PPP with PAP/CHAP
• CLI/Web Management/TR-069
• Simultaneously Bridge/Route on
individual 10/100BT Ports
• Order Code: 6512-A1-xx
6512 (Multi Port) 6518 Multi Port WiFi
• 4 10/100BT RJ45 Ports
• ADSL2+ RJ11 Port
• Annex M support
• Annex L support
• 802.11b/g
• RFC 1483/2684
• PPPoA / PPPoE
• RIP v1/v2/Static Routing
• Stateful Firewall Inspection
• NAT
• PPP with PAP/CHAP
• CLI/Web Management/TR-069
• Simultaneously Bridge/Route on
individual 10/100BT Ports
• Order Code: 6518-A1-xx
xx – Denotes Adapter model
NA for North America,
EU for Euro
UK for United Kingdon
JP for Japan
6511 (Single Port) 6519 Multi Port WiFi
• 4 10/100BT RJ45 Ports
• ADSL2+ RJ11 Port
• Annex M support
• Annex L support
• 802.11b/g
• RFC 1483/2684
• PPPoA / PPPoE
• RIP v1/v2/Static Routing
• Stateful Firewall Inspection
• NAT
• PPP with PAP/CHAP
• CLI/Web Management/TR-069
• Simultaneously Bridge/Route on
individual 10/100BT Ports
• Order Code: 6518-A1-xx
• Order Code: 6519-A2-xx
Bridged/Routed Single Port Ethernet
• The 6511 offers combination of RJ45 and USB – Single Ethernet Port for connection to PC or LAN
• Supports Bridge and Routing functions• 8 PVC’s• Web User Interface • TR-069 remote management• In Line Power Supply – no wall wart• Can be positioned Vertically or Horizontally• Full Router functionality• Security: Stateful Inspection Firewall• DELT – Dual Ended Loop Test• Annex L – Extended Reach• Annex M – Extended Upstream Bandwidth• Key Holes for under desk and wall mounting• On-board phone filter
CPE can stand
upright on the desk
Multiport and Wi-Fi Routers
• 6512 ADSL 4 port Ethernet Router – Supports all 6211 functions plus:
– 4 switched Ethernet ports
– Simultaneous Bridging/Routing based on port
– VC to Port Mapping for prioritization of traffic
– Configuration Ethernet WAN port
• 6518 ADSL 4 port Ethernet + Wireless Router – Supports all 6512 functions plus:
– 802.11b/g/n Wireless Gateway
• 6519-A1 ADSL 4 port Ethernet + Wireless Router – Support 6518 Function plus:
• 802.11b/g/n 2x2 MIMO antenna
• 6519-A2– Support 6519-A1 Function Plus
• 802.11b/g/n 2x2 5dBi MIMO antenna
Hospitality
New bracket for 651x modems.
Space cable management.
Separate bracket for power
adapter
Bracket for 151x modems.
6381
GSFRC 2.1-0503
• 10/100BT Port RJ-45
• USB 1.1 Port
• ADSL2+ RJ11 Port
• Integrated Phone Filter
• RFC 1483/2684
• PPPoA
• PPPoE
• RIP v1/v2
• Stateful Firewall Inspection
• NAT
• PPP with PAP/CHAP
• CLI/Web Management
• On-board phone filter
• 6381-A5-xx: ADSL2+ CPE (Lantiq)
6381 - ReachDSL CPE
• The 6381 modem supports both ReachDSL and ADSL2+. The modem attempts a Reach connection first. If the attempt is not successful it switches to ADSL mode.
• This dual mode modem allows service providers to stock one product for both ReachDSL and ADSL customers.
VDSL2 Series - 6718 (Broadcom)
• 6718-A1
– VDSL2 with ADSl2+ fallback
– Dedicated Gig-E WAN interface for FTTx deployment
– Supports up to 17a profiles
– Bridge/Router functionality
– 802.1q, 802.1p and IGMP snooping support
– VLAN to port mapping support
– External filter included in the kit
– 802.11 b/g/n 2x2 MIMO
– TR-69 support6718-A1
6742 VDSL2/ADSL2+ IAD Router with WiFi
6742 (Broadcom)
• 4 10/100BT RJ45 Ports
• VDSL2/ADSL2+
• 2 FXS ports
• SIP RFC 3261
• RFC 1483/2684
• PPPoA / PPPoE
• RIP v1/v2
• Stateful Firewall Inspection
• NAT
• PPP with PAP/CHAP
• CLI/Web Management/TR-069
• Simultaneously Bridge/Route on individual 10/100BT Ports
6748 – VDSL/ADSL2+ IAD with WiFi
• WAN– VDSL2 (Profile 17A)– ADSL2+ (Support Fallback)– Dedicated Gigabit Ethernet
• Voice– 2 FXS ports– SIP– Codecs: G.711, G.726, G.729– Fax (T.38)
• Security– Network Address Translator (NAT)– PPP with PAP/CHAP– VPN: IPSec Pass Through
• USB– One USB 2.0 port for
• USB File Server• USB Print Server• USB 3G dongle (selected models)
• WiFi– 802.11b/g/n
• WiFi QoS• WiFi Security
– Hardware 64/128-bit WEP engine– WEP weak key avoidance– TKIP– hardware AES engine supporting CCM
and OCB, WPA– 802.1x
CPE Matrix
Model Tech.Chipse
tType Ports
USB Port
sPhone Filter
Voice Ports
WiFiTR-069
SELT
DELTAnnex RoHS Avail
ADSL
1511-A1-xx ADSL2+ BRCM Router 1 No No No No Yes Yes A, L, M Yes GA
1512-A1-xx ADSL2+ BRCM Router 4 No No No No Yes Yes A, L, M Yes GA
1512-B1-EU ADSL2+ BRCM Router 4 No No No No Yes Yes B Yes GA
1518-A1-xx ADSL2+ BRCM Router 1 No No No b/g Yes Yes A, L, M Yes LA
6219-X1-xx ADSL2+ BRCM Router 4 No Yes No b/g Yes Yes A, L, M Yes LA
6381-A5-xxx ADSL2+/R TI Router 1 1 Yes No No No No A, L, M, Reach Yes GA
6388-A2-xxx ADSL2+/R TI Router 4 No Yes No b/g No No A, L, M, Reach Yes LA
6511-A1-xx ADSL2+ BRCM Router 1 No Yes No No Yes Yes A, L, M Yes GA
6512-A1-xx ADSL2+ BRCM Router 4 No Yes No No Yes Yes A, L, M Yes GA
6518-A1-xx ADSL2+ BRCM Router 4 No Yes No 11n 1x1 Yes Yes A, L, M Yes GA
6519-A1-xx ADSL2+ BRCM Router 4 Yes Yes No 11n 2x2 Yes Yes A, L, M Yes GA
6519-A2-xx ADSL2+ BRCM Router 4 Yes Yes No11n 2x2
5dBiYes Yes A, L, M Yes GA
SHDSL
1740-A3-400 SHDSL CNXT Router 4 No Yes No No Yes No NA Yes GA
VDSL2
6652-A1-xxx VDSL2 IKNS Bridge 4 1No, filter included
No No No Yes 8, 12, 17 Yes LA
6718-A1-xx VDSL2 BRCM Router 4 1No, Filter included
No 11N 2x2 Yes Yes 8, 12, 17 Yes GA
LA – Limited Availability (subject to inventory in stock)
GA – General Available
The Zhone Advantage for CPE
What makes a Zhone CPE different?
• End-to-End Solution from one vendor
• Custom Configuration
• Private Labeling
Custom Configuration (for 62xx, 63xx, 64xx models)
• Customers can have CPE to ship from the factory with base configuration that is tailored to them specifically. (PVC values, passwords, SSID etc.)
• The customer configuration is loaded onto the CPE in the factory before shipping.
• When the reset button is depressed it is reset to the customer’s defined configuration.
• Zhone creates a customer specific model number to control the configuration and firmware version.
• A setup fee and a per CPE fee is charged for the service. The setup fee is waived for large quantities.
• ADVANTAGE: Reducing or Eliminating need for the service provider to touch the CPE.
Private Labeling
• Carrier logos can be placed on the CPE or mailer Boxes
• Custom User’s Guide, CD can be included with the CPE
• Cables, filters and other accessories
SHDSL
Product Portfolio
G.SHDSL – 1740-A3 (Infineon)
• 1740-A3
– Infineon based chip set
– Available now
– Supports back-to-back operation
– Back-to-back operation with 1740-A2 – Interop still ongoing
– Create VPN connection within the modem
– Same support features as the old 1740-A2
– This modem is meant as a replacement for the 1740-A2
– RoHS compliant
– VPN features include:
• IPSec and PPPTP client/server
• DES, 3DES and AES encryption for IPSec
• L2TP over IPSec
• L2TP/PPTP/IPSec pass-through
1740-A3