Introducing you to: Zonit

Micro Automatic Transfer Switch (µATS)

ZONIT µATS

Zonit Micro Automatic Transfer Switch

JPE

• Micro Automatic Transfer Switch

• Easily deployed

• Highly versatile for operational moves for servers

• Cost Effective • Eliminates problems Caused by: 1. Too many devices plugged into a branch circuit 2. Flawed switching between phases of other ATS units

ZONIT µATS

JPE

• Zonit unit with single connector for Server and dual cords for the source power connections.

• Designed for non-synchronous A and B

Power sources

• Provides dual power to single power connection equipped devices

JPE

Plugs into back of servers, switches and other single connection equipped devices

JPE

Shows the feed wires connected to supply A and Supply B

JPE

Zonit connected to switch and shows the feed wires connected to supply A and Supply B

JPE

ZONIT µATS

• Allows Single power Supply devices in the network to be cost effectively connected to redundant A-B power paths

• Eliminates the primary cause of downtime for the network by delivering the A-B power path

• Makes it possible to test Uninterruptible Power Supply (UPS) units in network closets or remote sites during normal business hours

• Helps to eliminate overloading caused by plugging too many loads into a branch circuit

• The µATS provides current monitoring and warning indicators to help prevent branch circuit overloading

JPE

On A Power

On B

At 80% Max Load

A Over-voltage

Over -current

The yellow LED will illuminate when the unit reaches a 8A load at 240v. This is the maximum continuous load so that headroom is available for inrush currents that occur when IT equipment is cold and maximum current is drawn as fans, disk drive, etc. all powered when first plugged into a 13A branch Circuit.

ZONIT µATS

JPE

JPE

• Zonit μATS is a highly functioning transfer switch at the rack, taking “no” rack space, and provide redundant A-B power to single power input devices!

• The Zonit μATS is the world's smallest and most efficient capable Automatic

Transfer Switch for data centre equipment. It enables a completely different approach to the deployment of power in the data centre.

JPE

The Zonit μATS™ solves many common problems with power distribution and enables new and highly efficient patent pending methods of power distribution. The Zonit µATS™ has five primary usage scenarios: • Redundancy Enables redundant power feeds for single power cord devices • 99.9% Efficient Power Distribution Saves 3-15% of annual data centre power costs • Increase UPS Efficiency by 3-5% Saves 3-5% of UPS power conversion losses • Cost Effective N+1 Reliability Eliminates the need for 2nd power supplies in N+1 horizontal server tiers • Re-Location Flexibility Allows easy “hot swapping” to relocate powered-up equipment. Ideal for doing deployments that are temporary or will be moved at a later date. • The Zonit μATS™ is available in 12A 120V plus the 8A 240V configuration.

JPE

Five Primary Usage Scenarios

• The Zonit Micro Automatic Transfer Switch is the world’s smallest ATS and solves the problem of supplying A+B redundant power to single power supply devices.

• The Zonit μATS draws power from A and monitors power quality. The

Zonit ATS will automatically switch to secondary B power when A fails or becomes degraded in quality.

• The Zonit Micro ATS will switch back to A when it returns and is of

sufficient quality. The Zonit Micro ATS will transfer regardless of phase

angle between A and B.

JPE

JPE

Performance Data

JPE

Performance Data

JPE

Why use the Zonit µATS?

99.9% Efficient Power Distribution The Zonit Micro ATS (μATS) enables 99%+ efficient power distribution methods in the data center. It allows data

center devices to be preferentially connected to filtered utility power on the A side and an Uninterruptible Power

Supply (UPS) on the B side, which is only used when A is down. Eliminating UPS power conversion losses saves 3-

15% of data center power usage compared to redundant UPS designs, which can save millions of dollars in energy costs. The µATS™ is 99.75% efficient, using only 125mA in normal operation. This maximizes data center Power

Utilization Efficiency (PUE).

JPE

Product Type

Voltage 208-240V

IEC CE

Input Type C14

Input Cord

Length

Input Cord

Length

Output Type

Output Cord

Length

Output Cord

Length

International Part Number

Zonit Micro ATS 208-240V IEC-C14 0.6m 2 feet* Integrated IEC-C13 N/A N/A uATS1-HV-C14

Zonit Micro ATS 208-240V IEC-C14 0.6m 2 feet* 1 x IEC-C13 305mm 12 inches uATS1-A1-YC13-C14-AC-SP

Zonit Micro ATS 208-240V IEC-C14 0.6m 2 feet* 2 x IEC-C13 305mm 12 inches uATS1-A1-Y2C13-C14-AC-SP

Zonit Micro ATS 208-240V IEC-C14 0.6m 2 feet* 3 x IEC-C13 305mm 12 inches uATS1-A1-Y3C13-C14-AC-SP

JPE

Move key servers and switches without powering down

JPE

Using Zonit, can attach extension wire cord sets to shift units to new locationattached

JPE

JPE

JPE

Available through Internationally Approved Resellers For Information on Starline please contact: JPE Jelph Power Equipment Co. Pte Ltd, 11th Floor, Wisma Atria, 435 Orchard Road, Singapore 238877 Contact: Edward Hahn 65-9005-8214 ed.hahn@jelphpowerequipment.com

Other SlideShare Introduction Powerpoints: 1. Starline Track Busway Data Center Systems: To optimize is to make as perfect, effective, or functional as possible. Starline Track Busway for the Data Center does this. It enables the user to have clean power without sacrificing the ability of having rapid changes. The reliability of Starline in unsurpassed. The system construction has benefits such as plug and play connections as well as reusability of the system into the future. I hope to hear from you in the near future. http://www.slideshare.net/edhahn001/star-line-presentation-premier-1 2. Starline Track Busway Commercial Systems: Sustainability is the desired outcome for the design on projects. Starline provides this outcome by blending functionality and adaptability to the design. This Power point shows photos of retail and commercial facilities using Starline Track Busway for electrical distribution. The ability to change is fundamental. To change the positions of lighting fixtures, circuit arrangement, and usage points are all enabled by the usage of Starline Track Busway. http://www.slideshare.net/edhahn001/sustainable-power-designs-for-todays-and-tomorrows-commercial-needs-17747711 3. Zonit Miniature ATS: Zonit eliminates the multiple ATS arrangement. In effect, addresses single point of failure issues with the ATS. Provides fast and easy power transfer. This is a functioning switch that takes up no rack space. It provides redundant A-B power to Single Power Inputs. http://www.slideshare.net/edhahn001/zonit-micro-automatic-transfer-switch-brought-to-you-by-jpe 4. Starline Track Busway Ballroom Systems: The systems shown are embedded into the ceilings so only the access slot is exposed. Clean, simple power source for kiosks, trade show set-ups, general power, lighting. Structural system that is used for a wide variety of applications. Starline Track Busway http://www.slideshare.net/edhahn001/starline-ballroom-power-distribution-systems

JPE

Thank-You

JPE