1 Curriculum Vitae Dr. Lukman bin Ismail Correspondence address: Faculty of Agro-Based Industry, Universiti Malaysia Kelantan, Jeli Campus, 17600 Jeli, Kelantan, Malaysia. Tel.: +609 9477158, Email: [email protected]. Google Scholar Citation Index: http://scholar.google.com/citations?user=6F5Hwt0AAAAJ&hl=en Researchgate link: https://www.researchgate.net/profile/Lukman_Ismail3 Education: Nov 2007 Doctor of Philosophy in Chemical and Process Engineering Heriot-Watt University, Edinburgh, Scotland. Thesis: An Experimental Investigation of Paraffin Wax Deposition in a Batch Oscillatory Baffled Column. Supervisors: Prof. Xiongwei Ni and Dr. Robin E. Westacott. July 1998 Master of Science in Chemical Process Technology Universiti Sains Malaysia, Penang, Malaysia. Thesis: Supercritical Fluid Extraction Enhancement in the Decaffeination Process of Green Coffee Beans. Supervisor: Prof. Ir. Dr. Mohd Omar A Kadir. Sept. 1993 Bachelor of Technology (Hons.) in Food Science and Technology, Universiti Sains Malaysia, Penang, Malaysia. Dissertation: Extraction of Arecanoids using Supercritical Carbon Dioxide from Areca catechu Seeds. Supervisor: Prof. Ir. Dr. Mohd. Omar A Kadir. Work Experience: Nov. 2015 – Present Associate Professor Faculty of Agro-Based Industry Universiti Malaysia Kelantan 17600 Jeli, Kelantan, Malaysia. Link: http://etadbir.umk.edu.my/webpakar/detail.php?admin=laiVopiv#tabs-8 Sept. 2014 – Oct. 2015 Associate Professor Chemical Engineering Programme School of Engineering and Physical Sciences Heriot-Watt University Malaysia (HWUM) Precinct 5, Putrajaya. Link: http://www.hw.ac.uk/malaysia/staff-directory/lukman-ismail.htm Sept 2007 – Aug 2014 Senior Lecturer/ Assistant Professor Chemical Engineering Department Universiti Teknologi PETRONAS Bandar Seri Iskandar 31750 Tronoh, Perak, Malaysia. Nov. 2009 – Nov. 2010 Visiting Research Fellow (Post-Doctorate) Queen’s University Ionic Liquid Lab Centre David Keir Building Queen’s University Belfast Northern Ireland. Link: http://quill.qub.ac.uk/index.php/staff-students/previous-staff-students#post-doctoral-researchers
Transcript
1
Curriculum Vitae
Dr. Lukman bin Ismail
Correspondence address: Faculty of Agro-Based Industry, Universiti Malaysia Kelantan, Jeli Campus, 17600 Jeli, Kelantan, Malaysia.
Tel.: +609 9477158, Email: [email protected]. Google Scholar Citation Index:
Nov 2007 Doctor of Philosophy in Chemical and Process Engineering Heriot-Watt University, Edinburgh, Scotland. Thesis: An Experimental Investigation of Paraffin Wax Deposition in a Batch Oscillatory Baffled Column. Supervisors: Prof. Xiongwei Ni and Dr. Robin E. Westacott.
July 1998 Master of Science in Chemical Process Technology Universiti Sains Malaysia, Penang, Malaysia. Thesis: Supercritical Fluid Extraction Enhancement in the Decaffeination
Process of Green Coffee Beans. Supervisor: Prof. Ir. Dr. Mohd Omar A Kadir. Sept. 1993 Bachelor of Technology (Hons.) in Food Science and Technology, Universiti
Sains Malaysia, Penang, Malaysia. Dissertation: Extraction of Arecanoids using Supercritical Carbon Dioxide
from Areca catechu Seeds.
Supervisor: Prof. Ir. Dr. Mohd. Omar A Kadir. Work Experience:
Nov. 2015 – Present Associate Professor Faculty of Agro-Based Industry Universiti Malaysia Kelantan 17600 Jeli, Kelantan, Malaysia.
Chemical Engineering Programme School of Engineering and Physical Sciences
Heriot-Watt University Malaysia (HWUM) Precinct 5, Putrajaya. Link: http://www.hw.ac.uk/malaysia/staff-directory/lukman-ismail.htm
Sept 2007 – Aug 2014 Senior Lecturer/ Assistant Professor Chemical Engineering Department Universiti Teknologi PETRONAS Bandar Seri Iskandar
31750 Tronoh, Perak, Malaysia. Nov. 2009 – Nov. 2010 Visiting Research Fellow (Post-Doctorate) Queen’s University Ionic Liquid Lab Centre David Keir Building Queen’s University Belfast Northern Ireland.
June 2006 – Dec 2006 Research Associate Centre for Oscillatory Baffled Reactor Advancement (COBRA) Heriot-Watt University, Edinburgh, Scotland.
Link: http://www.cobra.hw.ac.uk/graduates.html
Sept. 2005 – Nov. 2005 Tutor and Lab Demonstrator Mechanical and Chemical Engineering Department School of Engineering and Physical Sciences
Heriot-Watt University, Edinburgh, Scotland.
July 1999 – Sept 2007 Lecturer Chemical Engineering Department Universiti Teknologi PETRONAS
Bandar Seri Iskandar 31750 Tronoh, Perak., Malaysia.
July 1998 - June 1999 Lecturer Kolej Matrikulasi Yayasan Saad Lembah Beringin, Selangor,Malaysia. Sept. 1997 – June 1998 Lecturer UK Twinning Programme
Chemical Engineering Department Prime College Jalan Klang Lama 58000 Kuala Lumpur, Malaysia. June 1995 – June 1997 Research Officer Doping Control Centre Universiti Sains Malaysia
Penang, Malaysia.
June 1993 – June 1995 Research Assistant School of Industrial Technology Universiti Sains Malaysia
Penang, Malaysia.
Teaching Experience:
1. Mass and Heat Transfer – Prime College, Kuala Lumpur 2. Engineering Mechanics (Statics) – Prime College, Kuala Lumpur 3. Engineering Mechanics (Dynamics) – Prime College, Kuala Lumpur 4. Manufacturing Engineering Technology – Prime College, Kuala Lumpur 5. Chemistry for Matriculation – Kolej Yayasan Saad, Lembah Beringin 6. Physics for A-Level – Kolej Yayasan Saad, Lembah Beringin. 7. Material and Energy Balance – Universiti Teknologi PETRONAS (UTP) 8. Introduction to Engineering Thermodynamics - UTP 9. Chemical Engineering Thermodynamics - UTP 10. Chemical Engineering Fluid Mechanics - UTP 11. Process Heat Transfer – UTP 12. Process Engineering A (Fluid Mechanics) – Heriot-Watt University Malaysia (HWUM) 13. Heat Transfer and Heat Exchanger (MSc Course) – HWUM 14. Process Engineering C (Heat Transfer) – HWUM 15. Environmental Impact Assessment (MSc) – HWUM 16. Design and Hygiene Control in Food Industry – Universiti Malaysia Kelantan (UMK) 17. Bioprocess and Industrial Design - UMK
Apr 2015 Coordinator for Research, Heriot-Watt University Malaysia. Feb 2015 Leader for Chemical and Petroleum Engineering Programmes Heriot-Watt
University Malaysia. Jan 2014 Guest Chief Editor for Advance Material Research Journal, TransTech
Publication, Switzerland. June 2013 Head of Logistics for the International Conference for Process Engineering
and Advance Material (ICPEAM 2014). Jan 2013 Department Cluster Leader for Separation Process and Thermodynamics
group, Chem. Eng. Dept., UTP. June 2011 Head of IT and Media for ICPEAM 2012. June 2010 Secretary of Conference, UK-Malaysia-Ireland Engineering and Science
Conference 2010 (UMIES 2010), Queen’s University of Belfast, Northern Ireland.
July 2007 Coordinator for EAC/MQA/Washington Accord Audit Visit – Preparing the
EAC documentation and acting as the focal person during EAC/MQA interview.
July 2007 – Nov. 2007 Coordinator for the Chem. Eng. Final Year Design Project. Sept 2004 Ahli Kongres Pengajian Tinggi Melayu 2004, United Kingdom. June 2004 - June 2005 President (2004/05), The Malay Association of Edinburgh, Scotland. June 2003 – June 2004 President (2003/04), The Malay Association of Edinburgh, Scotland. June 2003 – June 2005 Vice President (Post-graduate), Edinburgh Malaysian Students Association,
Edinburgh, Scotland. Aug 2002 Training for Isco Supercritical Fluid Extraction System at Isco Inc., Lincoln,
Nebraska, USA. May 2001 – July 2001 Industrial Attachment, PETRONAS Gas Berhad, Kerteh, Terengganu -
Involved in gas plant operation, problems rectification and shutdown/turnaround planning.
July 2000 – Nov. 2000 The 1
st Coordinator for the Final Year Project, Chem. Eng. Dept. UTP.
June 2000 Industrial Attachment, ASEAN Bintulu Fertilizer, Bintulu, Sarawak- Industrial
attachment for 2 weeks overlooking the shutdown/turnaround exercise. July 1999 – Nov. 2000 Coordinator for Industrial Internship Programme for the Chemical
Engineering Department, UTP.
4
Training/Workshop/Short Courses/Award
Date Title Organiser Venue
16-18 Aug 1993 A Short Course on Wastewater Treatment Plant: Design, Operation, Maintenance and Regulation
School of Industrial Technology, USM
USM Penang
9-11 Sep 1999 An Introductory Course on Artificial Neural Networks
Center for AI and Robotics UTM
UTP
1-3 Mar 2000 Dehydration Process Design and Operation Business and Advance Technology Center (BATC), UTMKL
UTM Jalan Semarak KL
7-8 Oct 2000 National Chemical Engineering Symposium 2000 (NACES 2000)
UTM UTM Skudai
16 Aug 2000 UTP Quality Day, Presenter UTP UTP
22-23 Aug 2000 Simulation and Optimization of Chemical Processes
Chemical Engineering UPM
UPM Serdang
5-17 Aug 2002 Judge for Language Week MPP UTP UTP
10 Jan 2002 Quality Education System UTP UTP
21-22 May 2002 Internal Quality Audit Training UTP Casuarina Park Royal Ipoh
21-22 May 2002 ISO 9001:2000 Internal Audit Quality Training QMI Quest Casuarina Park Royal Ipoh
10-12 Jul 2002 Supercritical Fluid Technology Training Isco, Inc. USA Lincoln Nebraska USA
19-21 Jun 2006 Malaysian Research Group International Conference
Ministry of Higher Education Malaysia and University of Salford UK
University of Salford UK
21-23 May 2008
Workshop on Engineering of Subsea Production Systems
Prof. Jean-Luc Chasserot, AZUR Offshore Ltd.
The Westin, Kuala Lumpur
7 Nov 2008 Oustanding Research Team – Biomass Catalytic Gasification Systems for Sustainable Biohydrogen Production
UTP UTP
25-26 Oct 2008 Ministry of Higher Education Exhibition Ministry of Higher Education Malaysia
Bandar Seri Begawan, Brunei Darussalam
29-30 Jul 2009
Green Technology: Fundamentals and Application Seminar
Universiti Teknologi PETRONAS
UTP
5 Dec 2009 Long Service Award UTP UTP
13 Dec 2010 Best Research Team Award UTP Quality Day UTP
Jun 2014 Secretariat Member of ICPEAM 2014 UTP KL Conv. Center
3-5 Jun 2014 Participation in the 3rd International
Conference on Process Engineering and Advanced Materials (ICPEAM 2014)
UTP KL Convention Center
5
Publications:
a. Conference papers
1. Omar Nashed
, Khalik M. Sabil, Bhajan Lal, Lukman Ismail and Azuraien Japper @Jaafar.
(2014). Study of 1-(2-Hydroxyethyle) 3-methylimidazolium Halide as Thermodynamic Inhibitors. 3
rd International Conference on Process Engineering and Advanced Materials 2014
(ICPEAM2014). 3-5 June 2014, Kuala Lumpur Convention Center. 2. Arya Hosseinipour, Khalik M. Sabil, Andhy Arya Ekaputra, Azuraien Japper and Lukman
Ismail. (2014). The Impact of the Composition of the Crude Oils on the Wax Crystallization. 3rd
International Conference on Process Engineering and Advanced Materials 2014 (ICPEAM2014). 3-5 June 2014, Kuala Lumpur Convention Center.
3. Tia Rahmiati, Khairun Azizi Azizli, Zakaria Man, Lukman Ismail. (2014). The effect of KOH
concentration on setting time and compressive strength of fly ash-based geopolymer. 3rd International Conference on Process Engineering and Advanced Materials 2014 (ICPEAM2014). 3-5 June 2014, Kuala Lumpur Convention Center.
4. Thanh H. Trinh, Quyen N. Dao, KuZilati KuShaari, Lukman Ismail and Anis Shuib. (2014). The
Study on the release of urea from Agrium® coated urea using UV-Vis spectrometer. 3rd International Conference on Process Engineering and Advanced Materials 2014 (ICPEAM2014). 3-5 June 2014, Kuala Lumpur Convention Center.
5. Massoud Kermanioryani, Lukman Ismail, Mohamed Ibrahim Abdul Mutalib and Ghodsieh
Bagherzadeh (2014). Removal Of Methylene Blue from Aqueous Solution by Ionic Liquid. 3rd
International Conference on Process Engineering and Advanced Materials 2014 (ICPEAM2014). 3-5 June 2014, Kuala Lumpur Convention Center.
6. Nunung Prabaningrum, Lukman Ismail and Duvvuri Subbarao. (2014). Reaction Kinetics of In-Situ Methanolysis of Jatropha curcas seeds. 3
rd International Conference on Process
Engineering and Advanced Materials 2014 (ICPEAM2014). 3-5 June 2014, Kuala Lumpur Convention Center.
7. Rizwan Safdar, A. Aziz Omar, Lukman Ismail and Bhajan Lal. (2014). Solubility of CO2 in an
aqueous ammonium based ionic liquid. 3rd
International Conference on Process Engineering and Advanced Materials 2014 (ICPEAM2014). 3-5 June 2014, Kuala Lumpur Convention Center.
8. Ahmad Hafizi Pauzi, Lukman Ismail, Ahmer Ali Siyal, Zakaria Man and Khairun Azizi Azizli.
(2014). Experimental Study of Geopolymer Solidification Kinetics. 3rd
International Conference on Process Engineering and Advanced Materials 2014 (ICPEAM2014). 3-5 June 2014, Kuala Lumpur Convention Center.
9. Rashidah Mohamed Hamidi, Zakaria Man, Khairun Azizi Azizli, Lukman Ismail and Mohd
Fadhil Nuruddin. (2014). Mechanical activation of fly ash by high energy planetary ball mill and the effects on physical and morphology properties. 3
rd International Conference International
Conference on Process Engineering and Advanced Materials 2014 (ICPEAM2014). 3-5 June 2014, Kuala Lumpur Convention Center.
10. Ahmer Ali Siyal, Lukman Ismail, Zakaria Man, Khairun Azizi Azizli. (2014). Effect of NaOH and
Water Contents on Solidification of Sodium Silicate Free Geopolymer. 3rd
International Conference International Conference on Process Engineering and Advanced Materials 2014 (ICPEAM2014). 3-5 June 2014, Kuala Lumpur Convention Center.
11. N. H. Zamri, L. Ismail, R. H. Abdul Rahim, A. A. Siyal, Z.Man and K.A. Azizli. (2014). Kinetics
of Geopolymer Solidification Study using Texture Analyzer. Malaysia-Indonesia Geopolymer Symposium 2014 (MIGS 2014). 11-12 May 2014. Putra World Trade Center, Kuala Lumpur.
12. Thanh H. Trinh, Ku Zilati K. Shaari, Anis Suhaila Bt Shuib and Lukman Ismail. (2013). Modeling of Urea Release from Coated Urea for Prediction of Coating Material Diffusivity. Proceedings of the 6th International Conference on Process Systems Engineering (PSE ASIA).
25 - 27 June 2013, Kuala Lumpur. 13. Thanh H. Trinh, Ku Zilati Ku Shaari, Anis Suhaila Shuib, Lukman Ismail, Abdul Basit and
Babar Azeem. (2013). Modeling the Release of Urea from Coated Urea: The Constant Release Stage. Proceedings of the International Conference on the Science and Engineering of Materials (ICoSEM). Nov. 13 -14, Universiti Malaya, Kuala Lumpur.
14. Nunung Prabaningrum, Lukman Ismail and Duvvuri Subbarao. (2013). Optimization of In-Situ Methanolysis of Jatropha curcas Seeds. Proceedings of the 3rd International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2013). Oct. 30-31,
Universiti Teknikal Melaka (UTeM), Melaka. 15. Omar Nashed, Khalik M Sabil and Lukman Ismail. (2013). Hydrate equilibrium measurement
of single CO2 and CH4 hydrates using micro DSC. International Oil and Gas Symposium and Exhibition 2013 - (IOGSE 2013). Universiti Malaysia Sabah, 88999, Kota Kinabalu, Sabah,
Malaysia.
6
16. Muhammad Sagir, Isa M.Tan, Muhammad Mushtaq, Lukman Ismail, Muhammad Nadeem
and Muhammad Rizwan Azam. (2013). CO2 Mobility Control by CO2 Philic Surfactants for Enhanced Oil Recovery Applications. International Oil and Gas Symposium and Exhibition 2013 - (IOGSE 2013). Universiti Malaysia Sabah, 88999, Kota Kinabalu, Sabah, Malaysia.
17. Thanh, N.T., Uemura, Y., Osman, N and Ismail, L. (2013). The Effect of Aeration Rate on the Growth of Scenedesmus quadricauda in Columns Photobioreator. Proceedings of the Joint Conference on Reneable Energy and Nano Technology (JCREN). Nov. 25-26, Higashi-
Hiroshima, Japan. 18. Muhammad Rizwan Azam, Isa M Tan, Lukman Ismail, Muhammad Mushtaq, Muhammad
Sagir and Muhammad Nadeem. (2013). Static Adsorption of Synthesized Anionic Surfactant onto Berea Sandstone: A Comparative Study. International Oil and Gas Symposium and Exhibition 2013 - (IOGSE 2013). Universiti Malaysia Sabah, 88999, Kota Kinabalu, Sabah, Malaysia.
19. Muhammad Rizwan Azam, Isa M Tan, Lukman Ismail, Muhammad Mushtaq, Muhammad
Sagir and Muhammad Nadeem. (2013). Effect of Alkali on Static Adsorption of Synthesized Anionic Surfactant for EOR Applications. International Oil and Gas Symposium and Exhibition 2013 - (IOGSE 2013). Universiti Malaysia Sabah, 88999, Kota Kinabalu, Sabah, Malaysia.
20. Zuliana A, Isa M. T. and L Ismail.(2012). Evaluation of Inhibitors on Wax Deposition in
Malaysian Waxy Crude Oil. (ICIPEG 2012). 12-14 June 2012, Kuala Lumpur Convention Centre. (SCOPUS Indexed Proceedings).
21. Nguyen Tien Thanh, Nguyen Ngoc Hanh, Lukman Ismail, Yoshimitsu Uemura. (2012). Lipid
Production by Microalgae. 2nd International Conference on Process Engineering and Advanced Materials 2012 [ICPEAM2012].
22. Mohd Munir Mohd Farok, Lukman Ismail and Khalik M. Sabil. (2012). On the Experimental
Investigation of Hydrates Crystallization Behavior. 2nd International Conference on Process Engineering and Advanced Materials 2012 [ICPEAM2012].
23. Nunung Prabaningrum, Lukman Ismail, Duvvuri Subbarao (2012) Optimization of In-Situ
Transesterification of Jatropha curcas seeds in Soxhlet Extractor. [ICPEAM2012]. 24. Nguyen Tien Thanh, Lukman Ismail, Yoshimitsu Uemura and Noridah Osman. (2012). The
Effects of Innoculum and Aeration Rate of Scendesmus Quadricauda in Flat Plate Photobiorector. The 25th International Symposium on Chemical Engineering (ISCE-2012). December 14-15, 2012. Okinawa Convention Center, Okinawa, Japan.
25. Syamsul B. Abdullah, Z. Man, L. Ismail, M.I.Abdul Mutalib and M.A. Bustam. Estimation of
Solubility Parameter from Refractive Index for Ionic Liquid. ICPEAM 2012. 26. Abdullah Syamsul B., Z. Man, Ismail L., Maulud A., Abdul Mutalib M.I. and Bustam M. A., An
Optimization Study on the Extraction of Benzothiophene from Model Fuel using the Ionic Liquids 1-Butyl-3-Methylimidazolium Octylsulfate, 5
TH International Congress of Chemistry and
Environment (ICCE 2011), 27-29th
May 2011, Port Dickson. 27. Nunung Prabaningrum, Duvvuri Subbarao, Lukman Ismail. (2011). In-Situ Transesterification
of Jatropha Curcas seeds in Isopropanol and Sodium Hydroxide. United Kingdom–Malaysia–Ireland Engineering Science Conference 2011 (UMIES 2011), University of Malaya, Kuala Lumpur, 12 -13 July 2011.
28. Zuliana Abu, Isa M.Tan and Lukman Ismail. (2011). On the Effect of Inhibitors on Wax
Formation in Malaysian Waxy Crude Oil. United Kingdom–Malaysia–Ireland Engineering Science Conference 2011 (UMIES 2011), University of Malaya, Kuala Lumpur, 12 -13 July 2011.
29. Lukman Ismail. (2010). Leaching and Mercury Extraction Study for Supported Ionic Liquid.
PETRONAS-QUILL Industrial Meeting, Northern Ireland Technology Centre, Queen’s University Belfast, 5 July 2010.
30. Muhammad Suffian Mohd Yusoff, Lukman Ismail and A Halim Shah Maulud. (2010). Wax
deposition Study on Cold Finger Apparatus utilising Avrami Crystallisation Theory. Proceedings of the UK-Malaysia-Ireland Engineering and Science Conference 2010 (UMIES 2010), Queen’s University Belfast, Northern Ireland, 23-25 June 2010.
31. Mohd Munir Mohd Farok, Lukman Ismail and Zakaria Man. (2010). Effects of Temperatures
and Additives on Crystallisation Behaviour of Hydrates (2010). Proceedings of the UK-Malaysia-Ireland Engineering and Science Conference 2010 (UMIES 2010), Queen’s University Belfast, Northern Ireland, 23-25 June 2010.
32. Mohd Azmi Ismail, Jian Wang, Lukman Ismail. (2010). On the Investigation of Nacelle Anti-
Icing System utilising CFD Applications. Proceedings of the UK-Malaysia-Ireland Engineering and Science Conference 2010 (UMIES 2010), Queen’s University Belfast, Northern Ireland, 23-25 June 2010.
33. Abdullah, S.S., Azizan, M.T., Ismail, L., and Yusup, S. (2009). Biomass Pretreatment through
Torrefaction for Hydrogen Production. International Research and Development Forum 2009 (IRDF 2009), Kuala Lumpur.
34. Sean, L.L., Yusup, S., and Ismail, L. (2009). Comparative Studies on Drying Methods and
Characterization of Oil Palm Frond. The Proceedings of The Curtin University of Technology
7
Science and Engineering Conference 2009 (CUTSE 2009), Curtins University of Technology, Miri, Sarawak, 24-25 Nov. 2009.
35. Ruzaimah Nik Mohamad Kamil, Suzana Yusup, Lukman Ismail. (2009).
Non Linear Modeling
of Chemical Kinetics of Transesterification of Palm-based Methyl Esters with Trimethylolpropane. The Proceedings of the 3
rd International Conference on Chemical and
Bioprocess Engineering (ICCBPE-2009), Novotel Hotel, Kota Kinabalu, Sabah, 12-14 Aug. 2009.
36. Ismail, L., Westacott, R.E. and Ni, X. (2006). Paraffin Wax Deposition in a Batch Oscillatory
Baffled Column. Proceedings of the Malaysian Research Group International Conference 2006, University of Salford UK, 19-21 June 2006.
37. Ismail, L., Ni, X. and Westacott, R.E. (2003). Laboratorial Studies of Paraffin Wax Deposition –
A Review. Edinburgh Malaysian Students Research Forum, Edinburgh University, Edinburgh, 25 Oct. 2003.
th Scottish Fluid Mechanics Meeting, University of Strathclyde, Glasgow, 19 May 2004.
39. Ismail, L., Ni, X and Westacott, R.E. (2004b). Mitigating Wax Deposition Through Oscillatory Flow: Experimental Study Using Batch Oscillatory Baffled Column. Postgraduate Seminar, Heriot-Watt University, Edinburgh, UK, 2 June 2004.
40. Ismail, L., Ni, X and Westacott, R.E. (2004c). On the Deposition of Paraffin Wax in a Batch
Oscillatory Baffled Column. 10th
Meeting of the Process Intensification Network, Heriot-Watt University, Edinburgh, 3
rd June 2004.
41. Lukman. I, N.N.N. Ab. Rahman, Saleh. B and A.K. Mohd Omar. (1994). A Study On The
Optimum Supercritical Conditon For Extraction of Arecoline From Areca Nut Using Carbon Dioxide. Proceeding of the 5th JSPS-VCC Seminar on Intergrated Engineering. Pp 663-(1994).
42. Lukman. I, M.Z.Asmawi, A.Sadikun and A.K. Mohd Omar. (1993). Extraction of Arecoline from
Areca nuts Using Supercritical Fluid Carbon Dioxide, Trends in Traditional Medicine Research: Proceedings of the International Conference on the Use of Traditional Medicine and Other Natural Products in Health Care., ISBN 983-861-091-7, pp310 (1993).
b. Papers in SCOPUS Indexed Journals
1. Rizwan Safdar, Abdul Aziz Omar, Lukman B. Ismail, Arhama Bari, Bhajan Lal. (2015).
Measurement and Correlation of Physical Properties of Aqueous Solutions of Tetrabutylammonium Hydroxide, Piperazine and Their Aqueous Blends. Chinese Journal of Chemical Engineering, vol 22. (IF: 1.342)
2. Nguyen Tien Thanh, Yoshimitsu Uemura, Noridah Osman, and Lukman Ismail. (2015). The
Effect of Aeration Rate on the Growth of Scenedesmus quadricauda in Column Photobioreactor. Journal of the Japan Institute of Energy. 94, 177-180.
3. Khalik M. Sabil, Omar Nashed, Bhajan Lal, Lukman Ismail, Azuraien Japper-Jaafar. (2015).
Experimental Investigation on the Dissociation Conditions of Methane Hydrate in the Presence of Imidazolium-based Ionic Liquids. The Journal of Chemical Thermodynamics. 84, 7–13. (IF: 2.679)
4. Thanh H. Trinh, Kuzilati Kushaari, Anis S. Shuib, Lukman Ismail, Babar Azeem. (2015).
Modelling the Release of Nitrogen from Controlled Release Fertiliser: Constant and Decay Release. Biosystems Engineering. 130, 34-42.(IF: 1.960).
5. A Asif, Z Man, M Azizli, K Azizi, MF Nuruddin, L Ismail. (2015). The Effect of Si/Al Ratio and
Sodium Silicate on the Mechanical Properties of Fly Ash Based Geopolymer for Coating. Materials Science Forum. 803, 355-361. [IF: 0.5]
6. N. H. Zamri, L. Ismail, A Rahim, R Hanim, AA Siyal, Z Man, KA Azizli (2015). Kinetics of
Geopolymer Solidification Study Using Texture Analyzer. Materials Science Forum 803, 75-80. 7. R. H. Abdul Rahim, T Rahmiati, KA Azizli, Z Man, MF Nuruddin, L Ismail (2015). Comparison
of Using NaOH and KOH Activated Fly Ash-Based Geopolymer on the Mechanical Properties. Materials Science Forum. 803, 179-184.
8. T Rahmiati, KA Azizli, Z Man, L Ismail, MF Nuruddin (2015). Effect of Solid/Liquid Ratio during
Curing Time Fly Ash Based Geopolymer on Mechanical Property. Materials Science Forum. 803, 120-124.
9. Nunung Prabaningrum, Lukman Ismail, Duvvuri Subbarao. (2015). Optimization of In-situ
Methanolysis of Jatropha curcas Seeds. Applied Mechanics and Materials. 699, 625-631. 10. A Asif, Z Man, KAM Azizli, MF Nuruddin, L Ismail. (2014). Effect of NaOH Concentration on
the Strength of Non Sodium Silicate Fly Ash Geopolymer. Applied Mechanics and Materials 625, 102-105.
11. A Rahim, R Hanim, KA Azizli, Z Man, T Rahmiati, L Ismail. (2014). Effect of Solid to Liquid
Ratio on the Mechanical and Physical Properties of Fly Ash Geopolymer without Sodium Silicate. Applied Mechanics and Materials 625, 46-49.
8
12. TH Trinh, QN Dao, KZ Ku Shaari, L Ismail, A Shuib (2014). Study the Release of Urea from
Agrium® Coated Urea Using UV-Vis Spectrometer. Applied Mechanics and Materials 625, 745-748.
13. N Prabaningrum, L. Ismail, D Subbarao. (2014). Reaction Kinetics of In Situ Methanolysis of
Jatropha curcas Seeds. Applied Mechanics and Materials 625, 306-310. 14. A Hosseinipour, KM Sabil, A Arya Ekaputra, AB Japper, L. Ismail. (2014). The Impact of the
Composition of the Crude Oils on the Wax Crystallization. Applied Mechanics and Materials 625, 196-200.
15. O Nashed, KM Sabil, B Lal, L Ismail, AJ Jaafar (2014). Study of 1-(2-Hydroxyethyle) 3-
methylimidazolium Halide as Thermodynamic Inhibitors. Applied Mechanics and Materials 625, 337-340.
16. S Tsabitah, AA Omar, L. Ismail. (2014). Chemical Pretreatment Comparison for Oil Palm
Empty Fruit Bunch: A Review. Applied Mechanics and Materials 625, 851-855. 17. T Rahmiati, KAM Azizli, Z Man, L Ismail, MF Nuruddin (2014). The Effect of KOH
Concentration on Setting Time and Compressive Strength of Fly Ash-Based Geopolymer. Applied Mechanics and Materials 625, 94-97.
18. AH Pauzi, L Ismail, AA Siyal, Z Man, KA Azizli (2014). Experimental Study of Geopolymer
Solidification Kinetics. Applied Mechanics and Materials. 625, 127-130. 19. M Kermanioryani, L. Ismail, MIA Mutalib, G Bagherzadeh (2014). Removal of Methylene Blue
from Aqueous Solution by Ionic Liquid. Applied Mechanics and Materials 625, 241-244. 20. RM Hamidi, Z Man, KA Azizli, L Ismail, MF Nuruddin. (2014). Mechanical Activation of Fly Ash
by High Energy Planetary Ball Mill and the Effects on Physical and Morphology Properties. Applied Mechanics and Materials 625, 38-41.
21. AA Siyal, L Ismail, Z Man, KA Azizli. (2014). Effect of NaOH and Water Contents on
Solidification of Sodium Silicate Free Geopolymer. Applied Mechanics and Materials. 625, 3-6. 22. M Sagir, IM Tan, M Mushtaq, L Ismail, M Nadeem, MR Azam (2014). Synthesis of a New CO2
Philic Surfactant for Enhanced Oil Recovery Applications. Journal of Dispersion Science and Technology 35 (5), 647-654.
23. N. Prabaningrum, L. Ismail and D. Subbarao (2014). In-Situ Methanolysis of Jatropha curcas seeds in Soxhlet Extractor. Advanced Materials Research Vol. 917 (2014) pp 72-79.
24. Syamsul B. Abdullah, Z. Man, L. Ismail, M.I. Abdul Mutalib and M.A. Bustam. (2014). Solubility
Parameters based on Refractive Index Data of Ionic Liquid. Advanced Materials Research Vol. 917 (2014) pp 45-55.
25. Thanh H. Trinh, KuZilati KuShaari, Anis Suhaila Shuib, Lukman Ismail, Abdul Basit, Babar
Azeem. (2014). Modeling the Release of Urea from Coated Urea: The Constant Release Stage. Advanced Materials Research Vol. 970 (2014) pp 166-171.
26. RNM Kamil, S Yusup and L. Ismail. (2013). Application of Taguchi Method for Optimization of Polyol Ester Production by Esterification of Neopentyl Glycol with Hexanoic Acid. Asian Journal of Chemistry. 25 (15), 8256-8260, [IF 0.247].
27. Mushtaq, Muhammad; Tan, Isa M; Ismail, Lukman; Lee, Susan Y C; Nadeem, M; Sagir, M.
(2013). Oleate Ester-Derived Nonionic Surfactants: Synthesis and Cloud Point Behaviour Studies. Journal of Dispersion Science and Technology. (IF 0.6).
28. Azam, M. R., Tan, I. M., Ismail, L., Mushtaq, M., Nadeem, M., and Sagir, M. (2013). Static Adsorption of Anionic Surfactant onto Crushed Berea Sandstone. Journal of Petroleum Exploration and Production Technology. 3(3), 195-201. (IF 0.23).
29. Syamsul B. Abdullah, Z. Man, L. Ismail, A. Maulud and M. A. Bustam. (2013). Ionic Liquids Classification for Fuel Desulphurization. International Journal of General Engineering and Technology (IJGET). 2( 2), 29-38. (IF: 1.3728).
30. Azam, Muhammad Rizwan; Tan, Isa M; Ismail, Lukman; Mushtaq, Muhammad; Nadeem,
Muhammad; Sagir, Muhammad. (2013). Kinetics and Equilibria of Synthesized Anionic Surfactant onto Berea Sandstone. Journal of Dispersion Science and Technology DOI:10.1080/01932691.2013.783491 (IF 0.6).
31. Mushtaq, Muhammad; Tan, Isa M; Ismail, Lukman; Nadeem, Muhammad; Sagir, Muhammad;
Azam, Rizwan; Hashmet, Rehan. (2013). Influence of PZC (Point of Zero Charge) on the Static Adsorption of Anionic Surfactants on a Malaysian Sandstone. Journal of Dispersion Science and Technology. DOI:10.1080/01932691.2013.785362. (IF 0.6).
32. Sagir, Muhammad; Tan, Isa M; Mushtaq, Muhammad; Ismail, Lukman; Nadeem, Muhammad;
Azam, Muhammad Rizwan; Hashmet, Muhammad Rehan. (2013). A Novel Surfactant for the Reduction of CO2/Brine Interfacial Tension. Journal of Dispersion Science and Technology [IF 0.6], DOI:10.1080/01932691.2013.794111.
33. Aziz, M. A., Sabil, K. M., Uemura, Y., & Ismail, L. (2012). A study on torrefaction of oil palm biomass. Journal of Applied Sciences, 12(11), 1130-1135.
34. Abdullah Syamsul B., Z. Man, Ismail L., Maulud A., Abdul Mutalib M.I. and Bustam M. A.
(2011). An Optimization Study on the Extraction of Benzothiophene from Model Fuel using the
35. Ismail, L., Westacott, R.E. and Ni, X. (2007). On the Characterisation of Wax Deposition in an
Oscillatory Baffled Device. J. Chem. Technol. & Biotechnol. 81(12), 1905-1914.
36. Ismail, L., Westacott, R.E. and Ni, X. (2008). On the Effect of Wax Content on Paraffin Wax
Deposition in a Batch Oscillatory Baffled Tube Apparatus. Chem. Eng. J. 137(2), 205-213.
Professional membership:
Professional Member of Malaysian Institute of Food Technology MIFT (Membership no.: P01005). Research Grants
1. Jan 2014 – Jan 2017: Fundamental and Experimental Study on Phase Change Kinetics of
Geopolymer Formation (Fundamental Research Grant, Ministry of Education Malaysia, RM 97000.00, Principal Investigator (PI))
2. Jun 2013 – Jun 2016: Development of Organizational and Management Model for Plant Turnaround Maintenance in Malaysian Process-Based Industries (Science Fund, Ministry of Science and Technology, Malaysia, Co-Res. with AP Dr Zulkipli Ghazali).
3. Jan 2014 – Jan 2015: Development and Characterization of Novel Materials Using Ionic Liquids for the Treatment of Effluent Containing Dyes (UTP Short Term Research Fund, RM25k, PI)
4. March 2011- March 2012: Investigation of Wax Deposition in a Flow Loop System (UTP Short Term Initiation Research Fund (STIRF), RM25k).
5. Nov. 2011 – Nov. 2012: Biodiesel production by Transesterification of Waste Cooking Oil with an in-situ Water Adsorption (UTP Short Term Initiation Research Fund (STIRF No. 48/2011), RM24500).
for Biodegradable Drilling Fluids from Non Edible Resources. 2. Nunung Prapalingrum (Co-Supervisor, UTP, 2009-2014) – Biodiesel Production by Alkaline-
catalysed in-situ Transesterification of Jatropha curcas Seeds. 3. Syamsul Bahari b. Abdullah (Co-supervisor, UTP, 2008-2012)- Investigation on Potential Ionic
Liquids for Extractive Desulfurization of Diesel Fuel. 4. Muhammad Mushtaq (Co-Supervisor, UTP, 2008-2013) – Synthesis Characterization and
Evaluation of Surfactants Derived from Natural Oils for EOR Applications 5. Trinh Hoai Thanh (Co-Supervisor, 2011) – Numerical Method and CFD Simulation of Water
Absorption and Urea Release Mechanism in Urea Coating Applications. 6. Arya Hosseinipour (Main Supervisor, UTP, 2014) - Experimental and Modeling Investigation on
Applicability of Hyperbranched Polymers to Inhibit Wax Precipitation of Hydrocarbon Fluid During CO2 Injection
7. Massoud Kermani (Main Supervisor, UTP, 2013)- Synthesis and applications of novel ionic liquids for the treatment of waste water from dying process in textile industry.
8. Muhammad Sagir (Co-Supervisor, 2012) – Synthesis, Characterisation and Evaluation of CO2 Philic Surfactant for Mobility Control in Su9ercritical Condition of EOR.
MSc Students
1. Nguyen Tien Thanh (Main SV, 2011) – Bio-oil Production from Algae 2. Ahmer Ali Siyal (Main SV, 2013) – Kinetics of Crystallisation and Solidification of Geopolymers 3. Muhammad Rizwan Azam (Co-SV, 2010-2012) - Static Adsorption of Anionic Surfactants onto
Berea Sandstone 4. Omar Nashed (Co-SV, 2011-2014) - Investigation of Ionic Liquids as Dual-Function Gas
Hydrates Inhibitors. 5. Rizwan Safdar (Co-SV, 2012-2014) – Solubility of CO2 in Tetra-n-hidryl Ammonium Bromide
for CO2 Capture Applications. 6. Zuliana Abu (Co-SV, 2009-2013) - Experimental Investigation of Wax Formation and Its
Mitigation for a Malaysian Waxy Crude Oil.
10
PhD and MSc Examiner
1. Ayman Abd Rahman M A Jabbar (PhD, Chem. Eng,) – Performance of Blended Surface Active
Agent with Polymer for Enhanced Oil Recovery. 2. Saeed Majidisamakoush (PhD, Pet. Eng.) – Investigation of Using Chemically Water during
Water Alternating Gas Injection on Oil Recovery. 3. Wan Nurul Adyani (MSc., Pet. Eng.) – Investigation of Critical Parameters Affecting Asphaltene
Precipitation During CO2 Injection in Malaysian Oilfield. 4. Susan Lee Yun Ching (MSc., Chem Eng.) - Oleate Ester-Derived Nonionic Surfactants:
Synthesis and Cloud Point Behaviour Studies. FYP Students and Projects
Year Name Title
2014 Norhanisah binti Mansur Geopolymer Formation Analysis
2014 Nurul Syafiqah binti Ab Rahman Crystallisation Study of Ionic Liquids
2014 Raja Mohammad Arif bin Raja Hassan Paraffin Wax: The Effects of Particles on Crystallisation Kinetics
2014 Nurul Hafizah binti Nizam Study of the Kinetic Effects of Aluminosilicate Gel Formation on Fly Ash Based Geopolymer
2014 Muhammad Afifi bin Ibrahim Wax Deposition Study: Effects of Solvent on the Solubility of Wax Deposition
2013 Monica Sendi a/k Merang Paraffin Wax Crystallisation on the Effect of Solvent Types
2013 Nurul Syahida binti Ibrahim Study on the Kinetics of Geopolymer Formation
2013 Mackevin Lim Chun Teck Dyed Wastewater Treatment via Ionic Liquids
2013 Mohammad Norazry bin Sulaiman Drying of Ionic Liquids
2013 Ahmad Hafizi bin Pauzi Experimental Study on the Kinetics of Geopolymer Solidification
2012 Azharun Saidi Hamzah bin Abu Bakar Analysis of Milk Fat Deposition Using Avrami Kinetics Model
2012 Mira Syamimi binti Mazlan Analysis of Crystallisation of Paraffin Wax using Avrami Kinetics Model and LFRA
2012 Muhammad ‘Imran bin Ishak Crystallisation of Ionic Liquids using Avarami Kinetic Theory
2012 Mohd Fadhli bin Sayuti The Effects of Air Supply and Nitrogen Sources on S. Quadricauda
2012 Zarifah Ihassan Rectification-Enhanced Trans Esterification of Palm Fatty Acid Distillate
2012 Che Fatin Humaira binti Che Yusoff Drying of Ionic Liquids
2012 Nur Farhana binti Selamat Textural Analysis of Crude Oil Deposit
2011 Ahmad Faisal bin Ahmad Sazali Leaching of Ionic Liquids from A Fixed Bed
2009 Muhammad Suffian bin Mohd Yusoff Wax Deposition: Trend of Formation in Crude Pipeline
2009 Nur Jannah binti Nur Iskandar Conceptual Design on Oscillatory Flow Reactor (OFR) for Biolubricant
2009 Dang Dinh Thang Synthesis of Biodiesel From Various Sources of Plant Oils
2009 Mohd Zulfadzli bin Ayob Effects of Type of Solvent on Paraffin Wax Texture
2008 Farrah Wahida binti Ahmad Bahar CO2 Absorption using Amine Solution
2008 Foo Lee Sha The Effects of Initial Temparature and Solvent Types on the Decrystallising Process of Wax Using Ultrasound
2008 Azniza binti Azmy Silica Removal by Reverse Osmosis
2008 Nur Akhmar binti Mohd Safaruan Effects of Wax Content and Solution Volume on Wax Decrystallisation using Ultrasonic Waves
2008 Muhammad Akkil bin Azhar Microwave Effects on Paraffin Wax Deposition
2008 Noor Azma Samsudin The Formation of Wax Crystals Affecting the Flow Assurance
2008 Mohd Haziq bin Hamdan Wax Deposition – Effects of Wax Concentration and Solvent Types on Wax Deposition and Texture
2008 Muhammad Aznar bin Mohamed Nazar On the Effects of Asphaltenes Texture
2008 Nazeri bin Syawal The Effects of Wax Content, Solution Volume and Power Setting on the Liquefaction Process of Paraffin Wax Utilising Microwave
2008 Nur Izzati binti Hafiz Separation of Waste Amine using Reverse Osmosis System
2001 Mohd Nirman bin Mohd Halil Chlorophyl Extraction and Metal Content Determination from Pandanus, Betel and Croton Leaves.
2000 Marina binti Mat Ethanol Determination in Tapioca and Glutinous Rice Fermented Product
2000 Rohaya binti Khamis Ethanol Determination in Tapioca and Glutinous Rice Fermented Products
