Facade catalogue Innovative fastening systems ... - SFS Group

Facade catalogueInnovative fastening systems and application expertise

1

2

3

4

5

Table of contents

Glass Facade Systems

Tools And Accessoires

08/2011

Rainscreen Cladding m2 / m3 / MQL / MQLK / MB / MBK / MBR MBRK / MBR-X / MBRK-X / MDH / MDD

SW-T / SW3-T-H15 / SD / SD-H15 / SLA SX / SDA / ASO

AP / ASO / SSO / SLA-D12 / TW-S / TW-A4SX / GA-AS / GA-BS / SCFW-S / SDF2-S / TU-S

Corner bracket B / SDS drill bits / HSS drill bits EPDM / PFS-K / PFS-Q / PFR / PF-Z / PV

ALW-S1 / ALW-S2 / ALW-D / ALW-L1ALW-L2

VDS kit Large / VDS kit MediumVDS kit Small / Single components

Brickwork fastening

Subframe fastening

Panel fastening

Ancillaries

System ALW

Canopy System VDS

DI 650 / DB 620 / Lazy tongs RM-25 Lever tool RM-20 / AccuBird®

PowerBird®

Tools and accessories

Services and Business solutions

Attachment

News for

your success.

08/2011

From their Swiss HQ in Heerbrugg, the SFS Group operates internationally within four divisions:SFS intec, SFS unimarket, SFS locher and SFS services.

SFS intec serves the global engineering sub-contract and construction markets with high precision components. The division develops, manufactures and markets from four focused operating units:

AutomotiveProducts:Offering precision custom components to the automotive industry and its supply base: including cold formed parts, deep drawing and demanding plastic injection mouldings, as well as metal-to-plastic combinations.

IndustrialProducts: Serving the electrical and electronics industries, the

aircraft sector and the architectural hardware and machine tool businesses with ready-to-fit special screws and components.

FasteningSystems: Furnishing the building trades and their supply base

with systems for mechanical fixing. Supplying primarily producers of doors and windows with mechanical fixing systems and hinges and the transport sector with made-to-measure installation solutions.

Whether as a component supplier or service provider, SFS intec constantly strives to forge value-added chains with suppliers and customers alike. The ability to develop and continuously improve products and processes to the mutual benefit of our business partners and ourselves is a core factor in maintaining our competitive edge and therefore the success of SFS intec and our partners.

© S

FS in

tec,

iRC

, 08/

11, 9

04 4

60, E

Te

chni

cal c

hang

es r

eser

ved

Prin

ted

in S

witz

erla

nd

1

19

1.08/2011

Rainscreen cladding Fasteners and rivets

1Application Product code Page

Lining panel Corner bracket B ` 1.2

Drill bits SDS ` 1.3

Lining panel m2 / m2-S4 / m3 ` 1.4

Universal plug MQL / MQLK ` 1.7

Hollow brick, masonry MB / MBK ` 1.9

Concrete, solid brick MBR / MBRK ` 1.12

Concrete, high performanceMBR-X MBRK-X

` 1.15

Insulation Anchors MDH / MDD ` 1.17

Steel substructureSW-T SW3-T-H15 / SD SD-H15

` 1.19

Aluminium frameworkSLA / SX / SDA ASO

` 1.23

High performance cladding to aluminium and steel framework

AP / ASO / SSO ` 1.26

Aluminium framework SLA-D12 ` 1.30

Non metallic high performance cladding panel to timber batten

TW-S / TW-A4 ` 1.32

Sealing joint EPDM ` 1.34

Steel substructure SX ` 1.35

Special aesthetical fasteningGA-AS GA-BS

` 1.37

Non metallic high performance cladding panel to timber batten

SCFW-S ` 1.39

Non metallic high performance cladding to steel framework

SDF2-S ` 1.41

Blind fastening of HPL-cladding panels

TU-S ` 1.43

ProfilesPFS-K / PFS-QPFR / PF-Z / PV

` 1.45

2

1

Rainscreen cladding

Corner bracket B

Corner bracketCorner bracket for lining

Corner bracket B

Technical information

Application

Corner bracket for fixing beams or metal structures to the support structure.

Fixing

Fissaggio

■ Corner bracket BGalvanised steel measuring 25/100 mm (in compliance with DX51D + Z according to EN 10142) Two-face lining in Z275

Order Code

B 50-TApplication Product Type L KL Application range

�� Carbon steel BBBBBBBBBBBBBBBBBBBBBBBB

50-T60-T70-T80-T90-T100-T110-T120-T130-T140-T150-T160-T170-T190-T200-T210-T220-T240-T250-T260-T270-T280-T290-T300-T

Fixed width A of 50 mm Length L. variable from 50 to 300 mm Fixed height H of 60 mm

8.5x30 mm and 8.5xL mm slot holes Holes dia Ø 6.5

08/20111.

Tools and accessories can be found in chapter 3

3

1

1.08/2011

Rainscreen cladding

SDS

Hammer drill bits SDSDrill bits

Order information

F

d

L

SDS Carbide-geometry Dynamic, chisel-shaped drill bit head Multi-fluted, spacious KVS-spiral Unique KVS-flute design

d diameter | L Length | F working length | All measures in mm

Order codeSDS- 8,0x 110/ 50- 4PLUSType d L F Code F Application range

SDS-SDS-SDS-SDS-

8,0x8,0x8,0x8,0x

110/160/210/260/

50-100-150-200-

4PLUS4PLUS4PLUS4PLUS

50100150200

m2

m3 MDH

SDS-SDS-SDS-SDS-SDS-

10,0x10,0x10,0x10,0x10,0x

110/160/210/260/310/

50-100-150-200-250-

4PLUS4PLUS4PLUS4PLUS4PLUS

50100150200250

MQLMBRMBMDD


4

1

Rainscreen cladding

Fasteners m2

Fasteners for corner bracketsFasteners for corner brackets onto concrete

08/20111.

m2


Application

Fixing the corner brackets of the beams or metal structures onto concrete. Recommended materials: Concrete C20/25 with crush strength of 25N/mm2

Material

Fastener

■ Fastener m2 Pin in white galvanised steel / ex-pansion bush in stainless steel A2

■ Washer 15 mm in galvanised steel/nut in white galvanised steel

Order code

m2- 8,0x 80Application Product Type d L tfix Application range

�� Carbon steel m2-m2-

8,0x8,0x

8095

1025

Minimum anchorage depth h1: 50 mm

Assembly recommendations: The metal fastener must be positioned in the upper slotted hole

Fire resistance

Drill bit for concrete: Ø 8mm: SDS4–Plus–8xL


5

1m2-S4


Application


Material

Fastener

■ Fastener m2-S4Pin in stainless steel A4 / expansion bush in stainless steel in A4

■ Washer 15 mm in stainless steel A4 hex nut in stainless steel A4

Order code

m2-S4- 8,0x 80Application Product Type d L tfix Application range

�z Stainless steel A4 m2-S4-m2-S4-

8,0x8,0x

8095

1025



Fire resistance


1.08/2011

Rainscreen cladding

Fasteners m2-S4



6

1

08/20111.

m3


Application


Material

Fastener

■ Fastener m3 Pin in white galvanised steel / ex-pansion bush in stainless steel A2

■ Washer 15 mm in galvanised steel/nut in white galvanised steel

Order code

m3- 8,0x 80Application Product Type d L tfix Application range

�� Carbon steel m3-m3-m3-

8,0x8,0x8,0x

8095115

153050



Fire resistance


Rainscreen cladding

Fasteners m3



7

1MQL / MQLK


Application

Anchoring facade structure of metal or timber:- vertically perforated brick- chalky perforated sandstone- full brick of light concrete- universal mounting- concrete- solid brick- natural stone

Material

Fastener

■ MQL / MQLKAnchor sleeve: High value Polyamide Screw: S = Stainless steel, grade AISI 316 (European Standard 1.4401) T = Steel 5.8, electrogalvanize

Drive: T40 = Countersunk TORX® T40 HX = Hexagonal 13 mm

HD headform / drive

■ T40 recess ■ Hexagon 13 mm A/F ■ Hexagon H18 13 mm A/F


DB 620

■ Hammer drilling machine for pre-drilling concrete and masonry.

DI 650

■ Lightweight power screwgun for in-stalling self drilling and self tapping fasteners.

1.08/2011

Pannello di rivestimento

Tasselli d'ancoraggio m3

Facade anchorsUniversal plug

1.08/2011

Rainscreen cladding

MQL / MQLK


8

1

1. 08/2011

Rainscreen cladding

MQL / MQLK

Facade anchorsUniversal plug

Order information

KLL

d

T40 recess Hexagon 13 mm A/F

Hexagon H18 13 mm A/F

VD max. penetration | KL clamping length | HD headform / drive | W washer material and diameter | d thread diameter | L Length | t thickness of structure | All measures in mm

Order codeMQL- T40- 10,0x 80

Application Product Approval Type HD d L KL Application range

�� Carbon steel MQL-MQL-MQL-MQL-MQL-MQL-MQL-

T40-T40-T40-T40-T40-T40-T40-

10,0x10,0x10,0x10,0x10,0x10,0x10,0x

80100120140160180200

1030507090110130

Anchoring depth min. 70 mm embedment Area of application - vertically perforated brick- chalky perforated sandstone- full brick of light concrete- universal mounting- concrete- solid brick- natural stone

�� Carbon steel MQL-MQL-MQL-MQL-MQL-MQL-MQL-

HX-HX-HX-HX-HX-HX-HX-

10,0x10,0x10,0x10,0x10,0x10,0x10,0x

80100120140160180200

1030507090110130


�� Carbon steel MQLK-MQLK-MQLK-

H18-H18-H18-

10,0x10,0x10,0x

80100120

103050


�z Stainless steel A4 MQL-S4-MQL-S4-MQL-S4-MQL-S4-MQL-S4-MQL-S4-MQL-S4-

T40-T40-T40-T40-T40-T40-T40-

10,0x10,0x10,0x10,0x10,0x10,0x10,0x

80100120140160180200

1030507090110130



9

1MB / MBK


Application

Anchoring facade structure of metal or timber: - vertically perforated brick - chalky perforated sandstone - full brick of light concrete - foam mortar

Material

Fastener

■ MB / MBKAnchor sleeve: High value Polyamide Screw: S = Stainless steel, grade AISI 316 (European Standard 1.4401) T = Steel 5.8, electrogalvanize


HD headform / drive



DB 620


DI 650


1.08/2011

Pannello di rivestimento

Tasselli d'ancoraggio m3

Facade anchorsHollow brick, masonry

1.08/2011

Rainscreen cladding

MB / MBK


10

1

1. 08/2011

Rainscreen cladding

MB / MBK


Order information

KLL

d

T40 recess Hexagon 13 mm A/F

Hexagon H18 13 mm A/F


Order codeMB-S4- T40- 10,0x 80


�z Stainless steel A4

DIBt

iegtZu assung

vor

MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-

T40-T40-T40-T40-T40-T40-T40-T40-T40-

10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x

80100120140160200240280300

1030507090130170210230

Anchoring depth min. 70 mm embedment Area of application - Vertically perforated brick - Chalky perforated sandstone - Hollow concrete - Full brick of light concrete


DIBt

iegtZu assung

vor

MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-

HX-HX-HX-HX-HX-HX-HX-HX-

10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x

80100120140160200240300

1030507090130170230



DIBt

iegtZu assung

vor

MBK-S4-MBK-S4-

H18-H18-

10,0x10,0x

80100

1030 Anchoring depth min. 70 mm embedment

Area of application - Vertically perforated brick - Chalky perforated sandstone - Hollow concrete - Full brick of light concrete


11

1

1.08/2011

Rainscreen cladding

MB / MBK


Order codeMB- T40- 10,0x 80


�� Carbon steel

DIBt

iegtZu assung

vor

MB-MB-MB-MB-MB-MB-MB-MB-MB-

T40-T40-T40-T40-T40-T40-T40-T40-T40-

10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x

80100120140160200240280300

1030507090130170210230


�� Carbon steel

DIBt

iegtZu assung

vor

MB-MB-MB-MB-MB-MB-MB-MB-MB-

HX-HX-HX-HX-HX-HX-HX-HX-HX-

10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x

80100120140160200240280300

1030507090130170210230


�� Carbon steel

DIBt

iegtZu assung

vor

MBK-MBK-MBK-

H18-H18-H18-

10,0x10,0x10,0x

80100120

103050



12

1

1. 08/2011

Rainscreen cladding

MBR / MBRK

Facade anchorsConcrete, solid brick

MBR / MBRK


Application

Anchoring facade structure of metal or timber: - concrete - solid brick - hollow concrete

Material

Fastener

■ MBR / MBRKAnchor sleeve: High value Polyamide Screw: S = Stainless steel, grade AISI 316 (European Standard 1.4401) T = Steel 5.8, electrogalvanize


HD headform / drive



DB 620


DI 650



13

1

1.08/2011

Rainscreen cladding

MBR / MBRK


Order information

KLL

dT40 recess Hexagon

13 mm A/FHexagon H18

13 mm A/F


Order codeMBR-S4- T40- 10,0x 60



DIBt

iegtZu assung

vor

MBR-S4-MBR-S4-MBR-S4-MBR-S4-

T40-T40-T40-T40-

10,0x10,0x10,0x10,0x

60100120140

10507090

Anchoring depth min. 50 mm embedment Area of application - Concrete, solid brick - Chalky sandstone - Hollow concrete - Full brick of light concrete


DIBt

iegtZu assung

vor

MBR-S4-MBR-S4-MBR-S4-MBR-S4-MBR-S4-MBR-S4-MBR-S4-MBR-S4-


10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x

6080100120140160200240

1030507090110150190



DIBt

iegtZu assung

vor

MBRK-S4- H18- 10,0x 60 10



14

1

1. 08/2011

Rainscreen cladding

MBR / MBRK


Order information

KLL

dT40 recess Hexagon

13 mm A/FHexagon H18

13 mm A/F


Order codeMBR- T40- 10,0x 60


�� Carbon steel

DIBt

iegtZu assung

vor

MBR-MBR-MBR-MBR-MBR-MBR-MBR-MBR-

T40-T40-T40-T40-T40-T40-T40-T40-

10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x

6080100120140160200240

1030507090110150190


�� Carbon steel

DIBt

iegtZu assung

vor

MBR-MBR-MBR-MBR-MBR-MBR-MBR-MBR-


10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x

6080100120140160200240

1030507090110150190


�� Carbon steel

DIBt

iegtZu assung

vor

MBRK-MBRK-MBRK-

H18-H18-H18-

10,0x10,0x10,0x

6080100

103050



15

1

1.08/2011

Rainscreen cladding

MBR-X / MBRK-X

Facade anchorsConcrete, high performance

MBR-X / MBRK-X


Application

Anchoring facade structure of metal or timber: - concrete - solid brick - hollow concrete

Material

Fastener

■ MBR-X / MBRK-XAnchor sleeve: High value Polyamide Screw: S = Stainless steel, grade AISI 316 (European Standard 1.4401) T = Steel 5.8, electrogalvanize


HD headform / drive

■ T40 recess ■ Hexagon H18 13 mm A/F


DB 620


DI 650



16

1

1. 08/2011

Rainscreen cladding

MBR-X / MBRK-X

Facade anchorsConcrete, high performance

Order information

KLL

dT40 recess Hexagon H18

13 mm A/F


Order codeMBR-X-S4- T40- 10,0x 60



DIBt

iegtZu assung

vor

MBR-X-S4-MBR-X-S4-MBR-X-S4-MBR-X-S4-MBR-X-S4-MBR-X-S4-MBR-X-S4-MBR-X-S4-

T40-T40-T40-T40-T40-T40-T40-T40-

10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x

6080100120140160200240

1030507090110150190



DIBt

iegtZu assung

vor

MBRK-X-S4-MBRK-X-S4-

H18-H18-

10,0x10,0x

6080


Area of application - Concrete, solid brick - Chalky sandstone - Hollow concrete - Full brick of light concrete

�� Carbon steel

DIBt

iegtZu assung

vor

MBR-X-MBR-X-MBR-X-MBR-X-MBR-X-MBR-X-MBR-X-MBR-X-

T40-T40-T40-T40-T40-T40-T40-T40-

10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x

6080100120140160200240

1030507090110150190


�� Carbon steel

DIBt

iegtZu assung

vor

MBRK-X-MBRK-X-

H18-H18-

10,0x10,0x

6080


Area of application - Concrete, solid brick - Chalky sandstone - Hollow concrete - Full brick of light concrete


17

1

Rainscreen cladding

MDH

Fixing insulation boards with plastic anchorsInsulation Anchors

1.


MDH


Application

Pressure-resistant insulating materials, mineral wool, glass wool- For general purpose use in soft insulation- Suitable for all substrates- Suitable for insulation thickness up to 210 mm- Through fixing- Do not use for overhead fixing

Material

Insulation anchor

■ MDH Ø 90 mmPlug: Plastic

Order information

L

d

d diameter | L overall length | SD Setting depth | All measures in mm

Order codeMDH- 8,0x 60

Applications Product Type d L SD Application range

�z Plastic MDH-MDH-MDH-MDH-MDH-MDH-MDH-MDH-MDH-MDH-

8,0x8,0x8,0x8,0x8,0x8,0x8,0x8,0x8,0x8,0x

6080100120140160

180*200*220*240*

20202020202030303030

1. Drill a pilot hole2. Set plug until head lies flush on insulation3. Use a hammer for installation4. MDH has to be hammered precisely onto insulation

* two pieces

1

3

2

4

18

1

Rainscreen cladding

MDD

Fixing insulation boards with plastic anchorsInsulation Anchors

08/20111.


MDD


Applications

Pressure-resistant insulating materials, polyurethane rigid foam panels, polystyrenes, mineral wools - For general purpose use in hard and soft insulation pads - Suitable for all substrates - Anchor of insulation thickness up to 170 mm - Do not use for overhead fixing- with glass fibre reinforced plastic pin- Resistant to cold and heat- Through fixing

Material

Fastener

■ MDDPlug: Polyamide Thorn: Polyamide

Disc

■ MDD-VS: Disc for MDD Ø 90 mmPolyamide

Order information

L

d

d diameter | L overall length | SD Setting depth | All measures in mm

Order codeMDD- 10,0x 70

Applications Product Type d L SD Application range

�z Plastic MDD-MDD-MDD-MDD-MDD-MDD-MDD-

10,0x10,0x10,0x10,0x10,0x10,0x10,0x

7090110130150180210

40404040404040

1. Drill a pilot hole 2. Set plug until head lies flush on insulation 3. Drive-in the nail with a hammer 4. Nail has to be hammered precisely into the head

1

3

2

4

19

1

1.08/2011

Rainscreen cladding

SW-T / SW3-T-H15

Self drilling fastenersTimber substructure

SW-T / SW3-T-H15


Application

Fastening profile steel sheeting to timber structure in one operation.

Material

Fastener

■ SW-TPlated carbon steel, case hardened

■ SW-H15Plated carbon steel, case hardened 15 mm diameter flange head

HD headform / drive

■ Hexagon 8 mm A/F


DI 650


E480

■ The E480 setting tool is recom-mended for installing self drilling fasteners with the hexagon head.


20

1

1. 03/2011

Rainscreen cladding

SW2-S / SW-T / SW3-T-H15

Self drilling fastenersTimber substructure

Order information

KLL

d Hexagon 8 mm A/F


Order codeSW-T- 4,8x 35



�� Carbon steel SW-T- 4,8x 35VD max. steel:

1 x 1,0 mm3 x 0,75 mm

�� Carbon steel SW3-T- H15- 6,5x 50VD max. steel:

2 x 1,25 mm

Assembly recommendations:1 x SW3-T-H15-6,5x50 for long hole1 x SW-T-4,8x35 for normal hole

Assembly recommendations:3 x SW-T-4,8x35 for long hole Ø 6,5 mm

21

1

1.08/2011

Rainscreen cladding

SD / SD-H15

Self drilling fastenersSteel substructure

SD / SD-H15


Application

Fastening profile steel sheeting to steel in one operation: drilling, thread forming and sealing.

Material

Fastener

■ SD Plated carbon steel, case hardened

■ SD--H15Plated carbon steel, case hardened 15 mm diameter flange head

HD headform / drive

■ Hexagon 8 mm A/F


DI 650


E480



22

1

1. 08/2011

Rainscreen cladding

SD / SD-H15

Carbon steel self drilling fastenerSteel substructure

Order information

KLL

d Hexagon 8 mm A/F


Order codeSD 5- H15- 5,5x 22

Application Product Approval Type VD HD d L KL Application range

�� Carbon steel SD 5- H15- 5,5x 22 10VD

t VD max. steel: 5,0 mm

t min. steel: 1,5 mm

�� Carbon steel SD 5- 5,5x 25 12VD

t VD max. steel: 5,0 mm



Assembly recommendations:1 x SD5-H15-5,5x22 for long hole1 x SD5-5,5x25 for normal hole

Assembly recommendations:2 x SD5-5,5x25 for normal hole

23

1

1.08/2011

Rainscreen cladding

SLA / SX / SDA / ASO

Self drilling fastenersAluminium framework



Application

Fastening aluminium framework and steel framework together within over cladding and curtain wall applications.

Material

Fastener

■ SLAAustenitic stainless steel, grade AISI 316 (European Standard 1.4578)

■ SXAustenitic stainless steel, grade AISI 304 (European Standard 1.4301) or grade AISI 316 (European Standard 1.4401) on request

■ ASO Body: Aluminium AIMg3 Mandrel: Stainless steel 1.4541

■ SDA Austenitic stainless steel, grade AISI 316 (European Standard 1.4578)

Washer

■ S = Stainless steel, grade AISI 304 (European Standard 1.4301)

■ A = Aluminium with vulcanised EPDM

Drill point and lead thread section

■ Case hardened, special carbon steel for SX products

■ milled drill point

Coloured fastenerColoured fasteners available Colour heads are achieved through powder coating

HD headform / drive

■ Hexagon 8 mm A/F ■ Low profile Ø 12 mm


DI 650


E480



24

1

1. 08/2011

Rainscreen cladding



Order information

KLL

d Hexagon 8 mm A/F Low profile Ø 12 mm Coloured fastener

W: Washer material S Stainless Steel A Aluminium


Order codeSLA 5/ 6- S4- 6,0x 19

Application Product Approval Type VD KL HD W* d L KL Application range

�z Stainless steel A4 SLASLA

5/4-5/6-

6-8-

S4-S4-

6,0x6,0x

1921

4 - 66 - 8 VD max. alu:

5,0 mm

t min. alu: 1,8 mm

Only for aluminium framework

�z Stainless steel

DTU 40.35DTU 40.36

SX 3/ 9- S16- 6,0x 29 9VD max. steel:

3,0 mm

t min. steel:2 x 0,63 - 0,9 mm

t max. steel: 2,5 mm

t min. alu: 2,0 mm

�z Stainless steel

DTU 40.35DTU 40.36

SXSX

5/5/

8-12-

S16-S16-

5,5x5,5x

3337

812

VD max. steel: 5,0 mm



t min. alu: 2,0 mm

t max. alu: 4,0 mm

�z Stainless steel SX 5/ 12- D12- 5,5x 37 12 VDt VD max. steel:

5,0 mm



t min. alu: 2,0 mm

t max. alu: 4,0 mm

Bit: T25W

Karlsruher Institut für Technologie


25

1

1.08/2011

Rainscreen cladding



Order codeSX 5/ 12- D12- A12- 5,5x 37


�z Stainless steel SX 5/ 12- D12- A12- 5,5x 37 12 VDt VD max. steel:

5,0 mm

VD max. alu: 5,0 mm



t min. alu: 2,0 mm

t max. alu: 4,0 mm

Bit: T25W

�z Stainless steel A4 SDA 3/ 25-40- S4- S10/SR2- 4,8x 48 25 - 40VD max. alu:

3,0 mm

Timber batten to aluminium


Order code

ASO- D11- 50080

Application Product Approval Type HD Code KL min. max. d x L Application range

�È Aluminium ASO-ASO-

D11-D14-

5008050120

2,0 - 4,05,0 - 9,5

5,0 x 8,05,0 x 12,0

Head diameter D: 11,0 mm


Pilot hole: Ø 5,1 mmKarlsruher Institut für Technologie

26

1

1. 08/2011

Rainscreen cladding

AP / ASO / SSO

Coloured rivetsHigh performance cladding to aluminium and steel framework

AP / ASO / SSO


Application

Face fixing of high performance cladding panel to aluminium and steel framework.

Material

Rivet

■ APBody: Aluminium AIMg5 Mandrel: Stainless steel 1.4541

■ ASOBody: Aluminium AIMg3 Mandrel: Stainless steel 1.4541

Rivet

■ SSOBody: Stainless steel 1.4578 Mandrel: Stainless steel 1.4571



AccuBird®

■ For standard blind rivets 2 - 5 mm and for Bulb-tite® rivets 4 - 6,3 mm.

Lever tool RM-20

■ Including 4 rivet nozzles. For rivet diameter: 3,0 - 5,0 mm.

Lazy tongs RM-25

■ Including 4 rivet nozzles. For rivet diameter: 4,0 - 6,0 mm.

■ Special nosepiece for AP, ASO and SSO rivets. Fits to AccuBird® and PowerBird®.

■ Handle for centered drill bit Ø 5,1 mm.

■ Drilling gauge for centered drill holes including drill bit Ø 5,1 mm. Replaceable top pieces with different diameters available.


27

1

1.08/2011

Rainscreen cladding

AP / ASO / SSO

Coloured rivetsHigh performance cladding to aluminium and steel framework

Order information

L

d

d1 D

h

Coloured fastener

HD headform / drive | KL Grip range | d x L diameter / length | t thickness of structure | All measures in mm

Order code

AP11- 50120-SApplication Product Type HD Code KL min. max. d x L Application range

�È Aluminium AP11-AP11-

50120-S50180-S

4,0 - 8,09,5 - 13,5

5,0 x 12,05,0 x 18,0 Head diameter D: 11,0 mm

Pilot hole: Ø 5,1 mm

�È Aluminium AP14-AP14-AP14-AP14-

50120-S50160-S50180-S50210-S

4,0 - 8,08,0 - 12,09,5 - 13,512,5 - 16,0

5,0 x 12,05,0 x 16,05,0 x 18,05,0 x 21,0



�È Aluminium AP16-AP16-AP16-

50160-S50180-S50210-S

8,0 - 12,09,5 - 13,512,5 - 16,0

5,0 x 16,05,0 x 18,05,0 x 21,0



�È Aluminium ASO-ASO-ASO-ASO-ASO-ASO-ASO-

D11-D11-D11-D11-D11-D11-D11-

50080501005012050140501605018050200

2,0 - 4,04,0 - 6,05,0 - 9,58,0 - 10,010,0 - 12,012,0 - 14,014,0 - 16,0

5,0 x 8,05,0 x 10,05,0 x 12,05,0 x 14,05,0 x 16,05,0 x 18,05,0 x 20,0



�È Aluminium ASO-ASO-ASO-ASO-ASO-ASO-ASO-

D14-D14-D14-D14-D14-D14-D14-

50080501005012050140501605018050200

2,0 - 4,04,0 - 6,05,0 - 9,58,0 - 10,010,0 - 12,012,0 - 14,014,0 - 16,0

5,0 x 8,05,0 x 10,05,0 x 12,05,0 x 14,05,0 x 16,05,0 x 18,05,0 x 20,0



�z Stainless steel A4 SSO-SSO-SSO-

D15-D15-D15-

501405018050220

6,0 - 9,59,0 - 13,513,0 - 18,0

5,0 x 14,05,0 x 18,05,0 x22,0




28

1

1. 08/2011

Rainscreen cladding

Order information

f

d

L

d diameter | L Length | F working length | t thickness of structure | All measures in mm

Example order codeHSS- 5,10x 62

Type d L f Application range

HSS- 5,10x 62


29

1

1.08/2011

Rainscreen cladding

30

1

1. 08/2011

Rainscreen cladding

SLA-D12



SLA-D12


Application

Selfdrilling fastener for aluminium composite panels to aluminium framework.

Material

Fastener

■ SLA-D12Austenitic stainless steel, grade AISI 304 (European Standard 1.4301)


HD headform / drive

■ Low profile Ø 12 mm


DI 650


ZA 1/4‘‘

■ Universal socket to adapt different bits.

T20W Bit

■ Special T20 wedge bit for perfect fit on SFS intec painted fastener.

31

1

1.08/2011

Rainscreen cladding

SLA-D12


Order information

KLL

d Low profile Ø 12 mm Coloured fastener


Order codeSLA 3/ 6- S-D12- 4,8x 19

Application Product Type VD KL HD d L KL Application range

�z Stainless steel SLA 3/ 6- S-D12- 4,8x 19 6VD max. alu:

3,0 mm

Only for aluminium framework4 mm alu composite on 2 mm alu profileBit: T20W


32

1

1. 08/2011

Rainscreen cladding

TW-S / TW-A4

Austenitic stainless steel fasteners for timber battensNon metallic high performance cladding panel to timber batten

TW-S / TW-A4


Application

Non metallic high performance cladding panel to timber batten.

Material

Fastener

■ TW-SAustenitic stainless steel, grade AISI 304 (European Standard 1.4301) with powder coated colour finish.

■ TW-A4Austenitic stainless steel, grade AISI 316 (European Standard 1.4578)

Washer



HD headform / drive

■ Low profile Ø 12 mm ■ Low profile Ø 16 mm


DI 650


ZA 1/4‘‘


T20W Bit



33

1

1.08/2011

Rainscreen cladding

TW-S / TW-A4

Austenitic stainless steel fasteners for timber battensNon metallic high performance cladding panel to timber batten

Order information

KLL

d Low profile Ø 12 mm Low profile Ø 16 mm Coloured fastener


Order codeTW-S- D12- 4,8x 38

Application Product Type HD W* d L KL Application range

�z Stainless steel TW-S- D12- S12- 4,8x 38

Bit: T20W

�z Stainless steel TW-S-TW-S-TW-S-TW-S-TW-S-

D12-D12-D12-D12-D12-

4,8x4,8x4,8x4,8x4,8x

2530384460

Bit: T20W

�z Stainless steel TW-S- D16- 4,8x 38

Bit: T20W

�z Stainless steel A4 TW-A4- D12- 4,8x 38

Bit: T20W


34

1

1. 08/2011

Rainscreen cladding

EPDM

Thermal separation of structural componentsSealing joint

EPDM

Product advantages

■ extremely resistant to weathering and heat

■ highly elastic ■ dimensionally stable, even at high temperatures

■ optional self-adhesive on one side to facilitate application


Application

The dimensionally stable sealing tape is used for curtain walling to facades

Material

■ Elastomer sheet made of EPDM rubber

Colour

■ Black

Technical details

Item DIN Characteristics

Class of building material 4102 B2 (normally flammable)

Vapour diffusion resistance –40°C to +130°C

Processing temperature +5°C to +35°C

Shelf life 2 years

Storage temperature +5°C to +25°C

Order information

Order codeEPDM- 60/ 0,7

Type tape width tape thickness box capacity m/roll

EPDM- 60/ 0,7 25 25EPDM-EPDM-EPDM-

100/Adhesive-60/Adhesive-100/

0,70,70,7

252525

252525


35

1

1.08/2011

Rainscreen cladding

SX

Stainless steel self drilling fastenersSteel substructure

SX


Application

Stainless steel fastening of steel or facade panels to steel or aluminium structure in one operation: drilling, thread forming and secure fastening.

Material

Fastener

■ SXAustenitic stainless steel, grade AISI 304 (European Standard 1.4301)

Washer


Drill point and lead thread section

■ Case hardened, special carbon steel


HD headform / drive

■ Low profile Ø 12 mm ■ irius® Ø 12 mm


DI 650


E420

■ The E420 setting tool for installing self drilling fasteners with the irius® system.

ZA 1/4‘‘


L

Ø 12

d d

L

Ø 12

Special carbon steelcase hardenend

Special carbon steelcase hardenend


T25W Bit


36

1

1. 08/2011

Rainscreen cladding

SX

Stainless steel self drilling fastenersSteel substructure

Order information

KLL

dirius®

Ø 12 mmLow profile Ø 12 mm

Low profile Ø 10 mm

Coloured fastener

W: Washer material S Stainless Steel

* Select Washer 16 mm for cladding


Order codeSX 3/ 15- L12- S16- 5,5x 32


�z Stainless steel SX 3/ 15- L12- S16- 5,5x 32 15VD max. steel:

3,0 mm


�z Stainless steel SX 3/ 11- D10- 4,8x 24 11VD max. steel:

3,0 mm


Bit: T20W

�z Stainless steel SX 3/ 15- D12- 5,5x 30 15VD max. steel:

3,0 mm


Bit: T20W


37

1

1.08/2011

Rainscreen cladding

GA-AS / GA-BS

Stainless steel self tapping fastenersSpecial aesthetical fastening

GA-AS / GA-BS


Application

To fix any kind of cladding panels to timber, steel or aluminium sub-frames. A choice of colours and shapes for fascinating effects Choose from the range of shapes and colours to create special emphasis on internal or external surfaces. Achieve tonal features through the use of anodised aluminium and polished stainless materials. The thread onto which the head element is screwed is coated with spedcaps micro-encapsulated liquid adhesive. The adhe-sive cures within a few hours of installation and the design element is secured against unwinding through dynamic loads. It cannot be removed manually after curing.

Material

Fastener

■ GA-AS / GA-BSStainless steel, grade AISI 304 (European Standard 1.4301) C = Spedcaps coating GAZ: design elements A = Aluminium anodised S = Stainless steel grade 316, 1.4404

Washer


HD headform / drive

■ Hexagon: 3/8"~ 9,5 mm A/F ■ Special socket required E395


38

1

1. 08/2011

Rainscreen cladding

GA-AS / GA-BS

Stainless steel self tapping fastenersSpecial aesthetical fastening

Order information

KLL

d Hexagon: 3/8"~ 9,5 mm A/F


Order codeGA-AS- S16- 6,5x 45

Application Product Type W* d L KL Application range

�z Stainless steel GA-AS- S16- 6,5x 45-C

Hexagon: 3/8"~ 9,5 mm A/FThreaded part: M8 x 11 mm

Recommended pilot hole diameter: t in mm: pilot hole in mm: 1,0 – 1,25 4,50 1,5 – 3,00 5,00 wood 4,80

�z Stainless steel GA-BS- S16- 6,3x 32-C

Hexagon: 3/8"~ 9,5 mm A/FThreaded part: M8 x 11 mm

Recommended pilot hole diameter: t in mm: pilot hole in mm: 1,5 – 4,0 5,30 4,1 – 6,0 5,50 6,0 – 10,0 5,70 > 10,0 5,80

GAZ-801- GAZ-803-* GAZ-804- GAZ-806- GAZ-807- GAZ-811-

Ø 22 x 32 mm

Available in the following colors: Aluminium: red, blue, green, black, gold, silver* on special request Stainless steel: mill finish

Ø 42 x 28 mm Ø 22 x 32 mm Ø 32 x 38 mm Ø 32 x 32 mm Ø 22 x 32 mm


39

1

1.08/2011

Rainscreen cladding

SCFW-S

Self drilling fastenersNon metallic high performance cladding panel to timber batten

SCFW-S


Application

Self drilling fastener for non metallic high performance cladding panel to timber batten.

Material

Fastener

■ SCFW-SAustenitic stainless steel, grade AISI 304 (European Standard 1.4301)

Washer



HD headform / drive



DI 650


ZA 1/4‘‘


T20W Bit



40

1

1. 08/2011

Rainscreen cladding

SCFW-S

Self drilling fastenersNon metallic high performance cladding panel to timber batten

Order information

KLL



Order codeSCFW-S- D10K- A12- 5,0x 40

Application Product Type HD W* d L KL Application range

�z Stainless steel SCFW-S- D10K- A12- 5,0x 40 8

Bit: T20W

Wings diameter: 6,2 mm


41

1

1.08/2011

Rainscreen cladding

SDF2-S

Austenitic stainless steel fastenerNon metallic high performance cladding to steel framework

SDF2-S


Application

Self drilling fastener for non metallic high performance cladding panel to thin steel framework.

Material

Fastener

■ SDF2-SAustenitic stainless steel, grade AISI 304 (European Standard 1.4301) with powder coated colour finish.


HD headform / drive



DI 650



42

1

1. 08/2011

Rainscreen cladding

SDF2-S

Austenitic stainless steel fastenerNon metallic high performance cladding to steel framework

Order information

KLL



Order codeSDF2-S- D10- 4,5x 24

Application Product Type HD d L KL Application range

�z Stainless steel SDF2-S- D10- 4,5x 24 6 - 14VD max. steel:

1,25 mm


-Excentric drill point enables the fibre cement panel to be fixed at any point -no lifting of the fibre cement panel-Thread forming after penetration of the subframe-Secure, durable attachment of fibre cement panels

Bit: T20W


43

1

1.08/2011

Rainscreen cladding

TU-S

Blind fastenersBlind fastening of HPL-cladding panels

TU-S


Application

The TU-S blind fastener is superior to previous approaches to the attachment of HPL cladding panels with regards installation and long-term security.

Material

Fastener

■ TU-SBody: Stainless steel, grade AISI 316 (European Standard 1.4401) Mandrel: Carbon steel (removed completely)


PowerBird®

■ Standard blind rivets: Alu 4,8 - 8 mm, Steel: 4,8 - 6,4 mm. Bulb-tite® rivets 4 - 7,7 mm.

■ TU-S-6,0 x L

Drill bit with depth locator

■ Drill bit: 6,0x80 for TU-S-6,0xL


44

1

1. 08/2011

Rainscreen cladding

TU-S

Blind fastenersBlind fastening of HPL-cladding panels

Order information

L

d

d1 D

h

Hexagon 8 mm A/F


Order code

TU-S- 6,0x 9

Application Product Approval Type d L KL Application range

�z Stainless steel A4 TU-S-TU-S-TU-S-

6,0x6,0x6,0x

91113

0.5 - 3.50.5 - 5.52.5 - 7.5

HSS pilot hole, 6 mm dia. with depth stopAnchorage depth min. 6,5 mm For HPL panels between 8,0 - 13,0 mm thickness

Set the TU-S with a PowerBird® and nose piece 17/36


45

1

1.08/2011

Rainscreen cladding

PFS-K-Aluminium

ProfilesAluminium framework

PFS-K-Aluminium


Application

Assures a perfect finish of the corners.

Material

Profile

■ PFS-K-AluminiumAluminium: crude, hot varnished on the basis of the colour of the panels

Coloured fastenerColoured Profile available

Order Code

PFS-K-A- 10/10Application Product Type axb KL Application range

PFS-K-A-PFS-K-A-PFS-K-A-PFS-K-A-

10/1018/1829/2940/40

≤ 10≤ 18≤ 29≤ 40

Length of the profile: L = 2,8 mThickness: e = 0,8 mm

�È Aluminium


46

1

Rainscreen cladding

PFS-Q-Aluminium


PFS-Q-Aluminium


Application


Materiale

Profile



Order Code

PFS-Q-A- 10/10Application Product Type axb KL Application range

PFS-Q-A-PFS-Q-A-

10/1018/18

≤ 10≤ 18 Length of the profile: L = 2,8 m

Thickness: e = 0,8 mm

�È Aluminium

08/20111.


47

1

1.08/2011

Rainscreen cladding

PFR-Aluminium


PFR-Aluminium


Application


Material

Profile

■ PFR-AluminiumAluminium: crude, hot varnished on the basis of the colour of the panels


Order Code

PFR-A- 10/10Application Product Type axb KL Application range

PFR-A-PFR-A-PFR-A-

10/1015/1518/18

≤ 10≤ 15≤ 18


�È Aluminium


48

1

Rainscreen cladding

PF-Z-Aluminium


PF-Z-Aluminium


Application


Materiale

Profile



Order Code

PF-Z-A- 40/8/10Application Product Type axb KL Application range

PF-Z-A-PF-Z-A-

40/8/1040/10/10

≤ 8≤ 10 Length of the profile:: L = 2,8 m

Thickness: e = 0,8 mm

�È Aluminium

08/20111.


49

1

1.08/2011

Rainscreen cladding

PV-Aluminium


PV-A- 30x30Application Product Type hxl KL Application range

PV-A-PV-A-PV-A-PV-A-PV-A-PV-A

PV-A-PV-A-PV-A-PV-A-PV-A-PV-A-PV-A-PV-A-PV-A-PV-A-PV-A-

30x3030x4030x5030x6030x7030x90

40x10040x12040x14040x16040x18040x20040x22040x24040x26040x28040x300


�È Aluminium

PV-Aluminium


Application

Assures air ventilation of the facade and guard against rodent.

Material

Profile

■ PV-AluminiumAluminium: crude


Order Code

L

l

h

e


108/2011

2

ALW-S1

ALW-S2

ALW-D

ALW-L1

ALW-L2

2

2.

Clamping System ALW Clamping System ALW

Facade system ALW

2 08/2011

2

2.

Clamping System ALW

ALW-S1

Clamping System ALW

ALW-S1Simple, tried and trusted and timesaving.The ALW-S clamping system has already been used in amyriad of projects, both at home and abroad. The glass used can be anything from 8 to 18 mm thick, depending on the application. No glass drilling is required for completelysecure installation. We can even provide complete staticcalculations based on standard BS 6399, mandatorysince January 1. 2007. All components also conform to building regulations through adherence to BS 8118. Installing the clamps and fitting glass panels on site is made much easier by the fact that tolerances in the support structure can be taken up by adjustments in every direction: simple and time-saving.

SFS code: ALW-S1-O-RAL9006 ALW-S1-O-EV1Description: Single upper clamp for fixing one

pane, aluminium and EPDM insertsGlass thickness: 8 - 18 mmMax glass size: 2500 x 1200 mm*Colour: RAL - 9006 ** Anodised

aluminium EV1**

SFS code: ALW-S1-M-RAL9006 ALW-S1-M-EV1Description: Single central clamp for fixing two

panes, aluminium and EPDM insertsGlass thickness: 8 - 18 mmMax glass size: 2500 x 1200 mm*Colour: RAL - 9006 ** Anodised

aluminium EV1**

SFS code: ALW-S1-U-RAL9006 ALW-S1-U-EV1Description: Single lower clamp for fixing one

pane, aluminium and EPDM insertsGlass thickness: 8 - 18 mmMax glass size: 2500 x 1200 mm*Colour: RAL - 9006 ** Anodised

aluminium EV1**

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8

A A

B B

C C

D D

E E

F F

1 A2

Zusammenbau mitte WZStatus Änderungen Datum Name

Gezeichnet

Kontrolliert

Norm

Datum Name09.06.2009 Administrator

70,00

5242

15,00 40,00 15,00

70,00

15,00 40,00 15,00

70,00

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8

A A

B B

C C

D D

E E

F F

1 A2

Zusammenbau mitte WZStatus Änderungen Datum Name

Gezeichnet

Kontrolliert

Norm


70,00

5242

15,00 40,00 15,00

70,00

15,00 40,00 15,00

70,00

142

149

149

80

80

80

52

57

57

142

149

149

80

80

80

52

57

57

142

149

149

80

80

80

52

57

57

* The values indicated are for guidance only.** The clamping system is available in RAL colours or anodised. This choice makes a project-co-ordinated colour match possible.

upper

central

lower

308/2011

2

2.

Clamping System ALW

ALW-S2

Clamping System ALW

142

149

149

80

80

80

52

57

57

142

149

149

80

80

80

52

57

57

142

149

149

80

80

80

52

57

57

ALW-S2Simple, tried and trusted and timesaving.The ALW-S clamping system has already been used in amyriad of projects, both at home and abroad. The glass used can be anything from 8 to 18 mm thick, depending on the application. No glass drilling is required for completelysecure installation. We can even provide complete staticcalculations based on standard BS 6399, mandatorysince January 1. 2007. All components also conform to building regulations through adherence to BS 8118. Installing the clamps and fitting glass panels on site is made much easier by the fact that tolerances in the support structure can be taken up by adjustments in every direction: simple and time-saving.

SFS code: ALW-S2-O-RAL9006 ALW-S2-O-EV1Description: Twin upper clamp for fixing two

adjacent panes, aluminium andEPDM inserts

Glass thickness: 8 - 18 mmMax glass size: 2500 x 1200 mm*Colour: RAL - 9006 ** Anodised

aluminium EV1**

SFS code: ALW-S2-M-RAL9006 ALW-S2-M-EV1Description: Twin central clamp for fixing four



aluminium EV1**

SFS code: ALW-S2-U-RAL9006 ALW-S2-U-EV1Description: Twin lower clamp for fixing two



aluminium EV1**

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8

A A

B B

C C

D D

E E

F F

1 A2

Zusammenbau doppelt mitte Schnitt WZStatus Änderungen Datum Name

Gezeichnet

Kontrolliert

Norm


40,0015,00 15,00

140,00

70,00

4253

40,0015,00 15,00

140,00

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8

A A

B B

C C

D D

E E

F F

1 A2

Zusammenbau doppelt mitte Schnitt WZStatus Änderungen Datum Name

Gezeichnet

Kontrolliert

Norm


40,0015,00 15,00

140,00

70,00

4253

40,0015,00 15,00

140,00


upper

central

lower

4 08/2011

2

2.

Clamping System ALW

ALW-D

Clamping System ALW

ALW-D (double clamping)At last: double-overlapped glass panels.The further advanced ALW-D system offers applicationpotential for double-clamped installations. All the existingfeatures and benefits of the tried and trusted ALW-Sclamping system are enhanced by this additionaladvantage. The panes are not just horizontally but alsovertically overlapped. The absence of vertical joins createsa very attractive façade finish. Overlapping of the panes canbe either parallel or with a lateral displacement.

SFS code Description

ALW-D-M-U ALW - double lowerALW-D-R-O ALW - double-right upperALW-D-R-M ALW - double-right central

upper

167

176

176

80

80

80

52

57

57

6

6

6

central

167

176

176

80

80

80

52

57

57

6

6

6

right

central

left

70

240

40

70

Description: ALW - double, aluminium andEPDM inserts

Glass thickness: 8 - 18 mmMax glass size: max. 2500 x 1200 mm*Colour: RAL - 9006 ** Anodised

aluminium EV1**


167

176

176

80

80

80

52

57

57

6

6

6

lower

508/2011

2

2.

Clamping System ALW

ALW-D

Clamping System ALW

ALW-D (double clamping)

ALW-D-R-Oupper retainer,

short

ALW-D-L-Oupper retainer,

long

ALW-D-R-Oupper retainer,

short

ALW-D-L-Oupper retainer,

long

ALW-D-L-Mcentral retainer,

long

ALW-D-M-M ALW-D-R-Mcentral retainer,

short

ALW-D-L-Ulower retainer,

long

ALW-D-M-U ALW-D-R-Ulower retainer,

short

connected by a 6mm plate

Example: facade right sloping (front view)

ALW-D-M-Oconsisting of:

* A

sta

tic c

alcu

latio

n m

ust

be u

nder

take

n fo

r ev

ery

appl

icat

ion

6 08/2011

2

2.

Clamping System ALW

ALW-D

Clamping System ALW

ALW-D (double clamping)

Example: View lower retainer

left sloping

right sloping

parallel

View from above

70

7070

10

10

40

240

7038

70

70 38

6

70

7070

10

10

40

240

7038

70

70 386

70

7070

10

10

40

240

7038

70

70 38

6

ALW-D-M-Uconsisting of:

ALW-D-R-Ulower retainer,

short

ALW-D-R-Ulower retainer,

short


long


long

connected by a 6 mm plate

20

708/2011

2

Single and double retainers for fitting two or four glass panels; aluminium anodised EV1 or powder coated RAL 9006; with EPDM seal

ESG6, ESG6 enamelledESG8, ESG8 enamelled

0,4 - 2,9 kN/m2*

1200 mm x 1000 mm2400 x 500 mm

ALW-Light is ideal for installing light-weight glass panels onto aluminium sub-frames. It is characterised by ease–of-use and easy adaptation to any pane size. Fixing to the sub-frame is achieved with corrosion-proof power tool fasteners. Each glass panel is held in place by the positioning of the neighbouring pane, secured by shims. The glass is secured in place without drilling. Clamps are available in anodised aluminium EV1 or any RAL colour.

ALW-Light has a full static type approval to DIN 18516.There is no need for individual building regulations approval.

ALW-L1-Oupper single clamp

ALW-L1-Mmid single clap

ALW-L1-Ulower single clamp

ALW-L2-OUpper double clamp

ALW-L2-Mmid couble clamp

ALW-L2-Ulower double clamp

1

2

3

4

5

6

1

2

3

4

5

6

1

2

3

-5

-5

+5

+5

Front view

Adjustments

View from above

55

83

49

100


50 50

SFS code:

Discription:

Glass thickness:

Wind strength:

Max. glass surface:

ALW-L1 // ALW-L2

2.

Clamping System ALW

ALW-L1 / ALW-L2

Clamping System ALW

8 08/2011

2

2.

908/2011

2

Canopy System VDS

Canopy Systems VDS VDS kit Large

VDS kit Medium

VDS kit Small

Single components

2.

10 08/2011

2

2.

Canopy System VDS

VDS

Canopy System VDS

Assembly instructions:Fixing positions should be detailed accurately using suitable measuring tools.

Please note that building regulations may well apply. The customer is responsible for all building approvals. A structural engineer should be consulted to agree all loadings and substructure fixing types.Quoted prices do not include calculating loadings and fixing types. Fasteners to the substructure should be fixed in accordance with the manufacturer‘s recommendations and technical values

Assembly and loadings:

All masonry anchors i.e. chemical and expansion anchors should be installed in accordance with the manufacturer‘s instructions dependant upon the substrate.

Plates should be attached using the appropriate fastener.

The threaded connecting rod is positioned onto the upper fastening plate and is secured with a stainless steel pin. A safety retaining ring is then fixed in place.

Glass point fixing: place the male threaded portion through the bore hole in the glass and screw on, from beneath, the female part of the point fixing. Please note that the orientation is correct to align with the coupling on the lower end of the connecting rod. The thread pin must be secured with thread-locking adhesive. Then fit the glass pane into the lower wall bracket and secure it with bolts and retaining rings.

Insert the connecting rod into the front point fitting and secure it by slotting the split pin into the bolt.

The canopy is then adjusted by turning the connectingrod. The nuts must be locked and secured with thread-locking adhesive.

should be provided by the supplier. All flat washers used between the glass plates and fittings are UV resistant. All parts should be professionally assembled and adjusted. The canopy can be adjusted up to +/- 20 mm by way of the connecting rods. Once adjusted the connected rods should be locked to avoid misalignment. The canopies are not accessible for cleaning purposes.

1108/2011

2

2.

Canopy System VDS

VDS

Canopy System VDS

1659

mm

(46)

1564

mm

(42)

1458

mm

(39)

1337

mm

(34)

1304

mm

(46)

1205

mm

(41)

1092

mm

(36)

1400 mm1500 mm1600 mm 1700 mm1800 mm1900 mm2000 mm

connecting rodmiddle eye to eye

Z5: 2100 mm


Z4: 1615mm

95°

For standard sizes, static calculations are available.

SFS code: VDS-80-LargeDescription: Set canopy system LargeContaining: 2x upper wall bracket (VDS-WO)

2x connection rod (Z4/Z5)4x point fitting Ø 80 mm (VDS-80-ALP80)2x lower wall bracket (VDS-WU)

Glass thickness: Laminated safety glass,2 x 10 mm heat strengthened

Angle of the glass:

max. 10°

Angle of the rods:

30° - 46°

Bore holes: 30 mm

VDS-80-Large

2000

1900

1800

1700

1600

1500

1400 350

350

2000

7272

7272

7272

72

7272

7272

7272

72

30

* A

sta

tic c

alcu

latio

n m

ust

be u

nder

take

n fo

r ev

ery

appl

icat

ion

12 08/2011

2

2.

Canopy System VDS

VDS

Canopy System VDS

For standard sizes, static calculations are available.

SFS code: VDS-60-MediumDescription: Set canopy system MediumContaining: 2x upper wall bracket (VDS-WO)

2x connection rod (Z3)4x point fitting Ø 60 mm (VDS-60-ALP60)2x lower wall bracket (VDS-WU)


Slope of the roof:

max. 10°

Slope of the rods:

30° - 46°

Bore holes: 26 mm

VDS-60-Medium

905

mm

(41°

)

770

mm

(30°

)


Z3: 1250mm

1300

1200

300

300

1800

72

72

72

72

26

95°

1200 mm

1300 mm

* A

sta

tic c

alcu

latio

n m

ust

be u

nder

take

n fo

r ev

ery

appl

icat

ion

1308/2011

2

2.

Canopy System VDS

VDS

Canopy System VDS

SFS code: VDS-45-SmallDescription: Set canopy system SmallContaining: 2x upper wall bracket (VDS-WO)

2x connection rod (Z1/Z2)4x point fitting Ø 45 mm (VDS-45-ALP45)2x lower wall bracket (VDS-WU)


Slope of the roof:

max. 10°

Slope of the rods:

30° - 46°

Bore holes: 22 mm

VDS-45-Small

900

800

300

200

1600

72 72

22

1100

1000

300

250

1600

72 72

22

72 72

680

mm

(41°

)

550

mm

(30°

)


Z2: 1000mm

95°

800 mm900 mm


Z1: 820mm

1000 mm1100 mm

770

mm

(39°

)

640

mm

(30°

)

* A

sta

tic c

alcu

latio

n m

ust

be u

nder

take

n fo

r ev

ery

appl

icat

ion

14 08/2011

2

2.

Canopy System VDS

VDS

Canopy System VDS

Single componentsSFS code: VDS-WODescription: upper standard wall bracket

suitable for all 3 canopy sets

Single componentsSFS code: VDS-45/60/80 (Z1; Z2; Z3; Z4; Z5)Description: connecting rod with yoke

Please quote requested length Z1 - Z5 or special length

Single componentsSFS code: VDS-80-ALP80Description: point fixing Ø 80 mm with connector

for canopy set LARGE


for canopy set MEDIUM


for canopy set SMALL

Single componentsSFS code: VDS-WUDescription: lower standard wall bracket


41VS40

41VS20

41VS3041VM30

41VS10

41VL30

Ø11

110

50

80

10 24

Ø11

50

110 80

10

Ø

35

70

39

M12

38

26

82

102

3636

Ø80

10

2

2

6

24

Ø45

M10

24

Ø60

82

2

10

M10

Ø22

Ø16

Ø22

Ø16

/20

24

Ø60

82

2

10

M12

Einzelkomponenten für AL-Sky Vordachsystem

41VS40

41VS20

41VS3041VM30

41VS10

41VL30

Ø11

110

50

80

10 24

Ø11

50

110 80

10

Ø

35

70

39

M12

38

26

82

102

3636

Ø80

10

2

2

6

24

Ø45

M10

24

Ø60

82

2

10

M10

Ø22

Ø16

Ø22

Ø16

/20

24

Ø60

82

2

10

M12


41VS40

41VS20

41VS3041VM30

41VS10

41VL30

Ø11

110

50

80

10 24

Ø11

50

110 80

10

Ø

35

70

39

M12

38

26

82

102

3636

Ø80

10

2

2

6

24

Ø45

M10

24

Ø60

82

2

10

M10

Ø22

Ø16

Ø22

Ø16

/20

24

Ø60

82

2

10

M12


41VS40

41VS20

41VS3041VM30

41VS10

41VL30

Ø11

110

50

80

10 24

Ø11

50

110 80

10

Ø

35

70

39

M12

38

26

82

102

3636

Ø80

10

2

2

6

24

Ø45

M10

24

Ø60

82

2

10

M10

Ø22

Ø16

Ø22

Ø16

/20

24

Ø60

82

2

10

M12


41VS40

41VS20

41VS3041VM30

41VS10

41VL30

Ø11

110

50

80

10 24

Ø11

50

110 80

10

Ø

35

70

39

M12

38

26

82

102

3636

Ø80

10

2

2

6

24

Ø45

M10

24

Ø60

82

2

10

M10

Ø22

Ø16

Ø22

Ø16

/20

24

Ø60

82

2

10

M12


41VS40

41VS20

41VS3041VM30

41VS10

41VL30

Ø11

110

50

80

10 24

Ø11

50

110 80

10

Ø

35

70

39

M12

38

26

82

102

3636

Ø80

10

2

2

6

24

Ø45

M10

24

Ø60

82

2

10

M10

Ø22

Ø16

Ø22

Ø16

/20

24

Ø60

82

2

10

M12


41VS40

41VS20

41VS3041VM30

41VS10

41VL30

Ø11

110

50

80

10 24

Ø11

50

110 80

10

Ø

35

70

39

M12

38

26

82

102

3636

Ø80

10

2

2

6

24

Ø45

M10

24

Ø60

82

2

10M

10

Ø22

Ø16

Ø22

Ø16

/20

24

Ø60

82

2

10

M12


* A

sta

tic c

alcu

latio

n m

ust

be u

nder

take

n fo

r ev

ery

appl

icat

ion

1508/2011

2

2.

Canopy System VDS

VDS

Canopy System VDS*

A s

tatic

cal

cula

tion

mus

t be

und

erta

ken

for

ever

y ap

plic

atio

n

Variants of wall bracket




150

120

15

15Ø13

10

Ø35

70

39

10

150

150

120

15

15Ø13

Ø150

120

15

Ø1310

Ø35

70

39

Ø150

120

15

Ø13 10

150

SFS code: VDS-WO RundDescription: upper wall bracket, round design


SFS code: VDS-WU RundDescription: lower wall bracket, round design


SFS code: VDS-WO QuadratDescription: upper wall bracket, square design


SFS code: VDS-WU QuadratDescription: lower wall bracket, square design


1

3

9

3.08/2011

Tools and accessories Tools and accessories

3Application Product code Page

Self drilling self tapping fasteners

DI 650 ` 3.2

Concrete drilling DB 620 ` 3.3

For rivets

Lazy tongs RM-25

` 3.4

Lever tool RM-20

` 3.4

AccuBird® ` 3.5

PowerBird® ` 3.5

2

3

3. 08/2011


DI 650

Setting tool and accessoriesSelf drilling and self tapping fasteners

DI 650

Application

Lightweight power screwgun for installing self drilling and self tapping fasteners.

Technical details

Power Tool: DI 650Wattage: 650 WMax. revs: 2000 rpmPower Supply: 110V / 230VMax. torque: 20 NmOverall length: 290 mmWeight: 1,6 kg


3

3

3.08/2011


DB 620

Hammer drilling machineConcrete drilling

DB 620

Application

Hammer drilling machine for pre-drilling concrete and masonryTechnical details

Wattage: 620 WMax. revs: 870 rpmPower Supply: 110V / 230VWeight: 2,4 kgDrive connection: SDS-Plus

4

3

3. 08/2011

Tools and accessoriesRivet toolFor rivets

Lazy tongs RM-25 / Lever tool RM-20

Lazy tongs RM-25

Application

Including 4 rivet nozzles. For rivet diameter: 4,0 - 6,0 mm.

Lever tool RM-20

Application

Including 4 rivet nozzles. For rivet diameter: 3,0 - 5,0 mm.

5

3

3.08/2011


AccuBird® / PowerBird®

For standard blind rivets and for Bulb-tite® rivetsFor rivets

AccuBird®

Application

For standard blind rivets 2,0 - 5,0 mm.For Bulb-tite® rivets 4,0 - 6,3 mm.

Technical details

Weight: 2,2 KgPulling distance: 20 mmBattery: 14,4 Volt, Li-Ion 1,3 AhCharging: 60 min.Pulling strenght: 8500 NFor Rivet diameter: 2,0 - 5,0 mm

PowerBird®

Application

Standard blind rivets: Alu 4,8 - 8,0 mm, Steel: 4,8 - 6,4 mm. Bulb-tite® rivets 4,0 - 7,7 mm.

Technical details

Weight: 2,2 KgPulling distance: 20 mmBattery: 14,4 Volt, Li-Ion 2,6 AhCharging: 60 min.Pulling strenght: 13000 NFor Rivet diameter: 4,8 - 6,4 mm

4.A

4

Business Solutions by SFS intec:Individual solutions tailored to your needs.

Business Solutions Roofing and Cladding

We live in a complex, constantly changing business environment which presents us with numerous challenges in our day-to-day work. Simple, lean processes, enhancing efficiency and – not least – cost and time savings are important themes.

SFS intec is a committed partner, adopting a holistic approach and not merely supplying products. Our efforts are directed towards successfully addressing the challenges arising in day-to-day business with tailor-made supplementary services.

Our thoughtfully devised portfolio of solutions is adapted to the differing requirements of market participants. Whether for small and medium-sized businesses, industrial customers, dealers or system manufacturers: Business Solutions by SFS intec cater to a wide diversity of needs. Further-more, they are designed in such a way that they can be adapted individually to your specific requirements.

Take as well advantage of the benefits of our Business Solutions and be further informed in a personal meeting.

Business Solutions by SFS intec offer you the following benefits:

nInformation transparencynControlled supply chain processesnMany years of experience in supply chain management

nRapid, efficient orderingnOptimised inventorynConstruction site services

nFaster order input and processingnOutsourcing of process stepsnElectronic data interchange

nSimple ordering processnInformation in real timenReduction in process steps

Easy

Time-saving

Cost-saving

Secure

08/2011

4

Electronic ordering:Fast, simple, faultless.

eFormat

Accelerate and secure the order process!

Conversion of orders into electronic messages.

nOrders take priority

nFaster order processing

nNo transmission errors

eShop

Order quickly and easily online!

Website for online orders round the clock.

nOrder quickly and easily

nIrrespective of time and place

nImportant information at a glance (e.g. product range, previous orders, invoices)

eScan

Simplify your stock management!

Electronic ordering using a barcode scanner.

nOptimal inventory organisation and efficient ordering, including analysis and consultancy by SFS intec

nLower procurement costs

nFast, efficient ordering

EDI

Stay connected constantly!

Electronic data interchange between the customer’s ERP system and SFS intec‘s.

nContinuous link

nFast, simple process

nNo transmission errors

4.B 08/2011


4

Electronic information:Always up-to-date.

ePost

Receive your documents immediately!

Electronic mailing of order acknowledgment, delivery note and invoice.

nReal-time information

nInformation transmitted directly to the person responsible

nPaperless filing possible

ePortal

Information at your fingertips!

Orders and all related documents accessible at all times, including real-time delivery status and delivery confirmation.

nFull transparency

nInformation available at any time and place

nAccessibility for several defined users

4.C08/2011


4

Our construction site service:Higher on-site efficiency.

SMS Service

Delivering confidence!

Notification and confirmation of deliveries to the construc-tion site via SMS.

nHigh degree of transparency regarding deliveries

nNo more missed deliveries

nLess time-wasting, no standstills on the construction site

Job2Job

Save costs, improve efficiency!

You order per job, we do the rest: storage, order picking, packaging, labelling, forwarding.

nMajor cost savings in procurement

nReduced inventories

nGreater convenience

Business Solutions by SFS intec: We’d be glad to give you more information!

Are you interested in knowing more about Business Solutions by SFS intec?

Don’t hesitate to contact your customer relationship ma-nager. He’ll be pleased to organise a visit to you together with one of our Business Solutions experts!

4.D 08/2011


4

4.108/2011

Dependably well served:Meeting your business needs - tailored solutions from SFS intec.

Services Roofing and Cladding

Partners who reallyunderstand you:Experts for architectural exteriors.

The secure route to the right fastener solution:Simple, efficient planning aids at every step of the project.

Always one step ahead:An international network with local knowledge in every field.

Economy and securitybuilt in:Complete systems for every application.

Quality you can depend on:A network of quality-certified plants.

Reliable performance:Tested in-house, confirmed on site.

The right fastening system every time:Technical advice and support any time, anywhere.

High standard of delivery reli-ability due to local presence:Global supply chain management.

4

Structural timber and glulam beams

Hinge systems fordoors and windows

Ventilated curtain walling

Fastening systems for doors and windows

Fastening cassettesystems

Fastening composite panels

Post-and-rail joints

Glass attachment

Fastening flat roofs

Perimeter zones

1 2 3 4

5 6 7 8

9 10

1

3

4

56

78

9

2 10

Comprehensive application knowledge from one Partner

For every aspect of architectural exte-riors - from fixings to special hinges for doors and windows – SFS intec understands your business. We help make our global customer base more competitive.

Experienced sector specialists tuned to the regional requirements of each individual market guarantee genuinelocal advice and support.

Partners who really understand you:Experts for architectural exteriors.

Why not take advantage of our expertise:n More than 50 years experiencenTechnical application profession- als available for on-site supportnKnow-how database from research, development, manufacturing and application engineering

4.2 08/2011


4

The secure route to the right fastener solution:Simple, efficient planning aids at every step of the project.

Talking to the specialists in fastener and fixing technology

Whatever phase your project is at, SFS intec offers you the right planning aids to determine the appropriate fastener and the matching accessories.

That might be a specific application notmentioned in our catalogue. Whether it‘s a new build or renovation, our experts are here to offer fast, efficient help in choosing the right system for you; with no complications. Solutions are always matched to the specificrequirements of the individual project,providing you with longevity, functionali-ty, long-term security and real aesthetic appeal.

Choose the planning aids you need:n User-friendly cataloguesnOn-site or office advicenApplication technicians available by phonenProduct selector and project management aids at www.sfsintec.biznTwenty-four hour online e-shop ordering

4.308/2011


4

Tried and trusted technologies mat-ched to your specific requirements Somewhere in the world we will have already addressed the same tasks confronting you right now.

Our global team of experts is conti-nuously working on new challenges which means our customers benefit from a massive pool of accumulated knowledge. So they are always one step ahead.

With your specific requirements in our hands, we exchange know-how among a vast international network of industry specialists, seeking out the right fastener solutions for you. Solutions to make your work easier and to help your business be more competitive.

The services that can improve your competitive edge:nLocal site support on projects outside your home marketn Years of experience on numerous international projectsnIn-depth knowledge gained from our work with the world’s leading OEM’snPeople on site who speak your language, offering an international approach


4.4 08/2011


4

Services Flat Roof


Economy and security built in:Complete systems covering every application.

More than just fastener systems

We work hand-in-hand with planners and specifiers everyday on sites around the world. This is the driver behind our constantly evolving products and ser-vices. The diverse messages coming in from the market place are converted by our design and development specia-lists into profitable solutions for our customers.

SFS intec offers more than just fasteners to its customers. We provide intelligent drive systems and coatings that optimise the insertion torque. Design details that ensure every solu-tion is perfectly fit for purpose. We also offer those essential complementary products like rivets, pipe flashings, sealing tapes and anchorages – all fulfilling the most demanding require-ments.

SFS intec complete systems:nMulti-functional fasteners nGuaranteed long-life nSimple and easy to use nIntelligent installation tools enabling fast, efficient worknSystem accessories including rivets, pipe flashings, sealing tapes and anchorages

4.508/2011


4

Assured quality – fast delivery

We never compromise when it comes to our application-optimised fasteners. Our trained specialists throughout the value-added chain are there to ensure quality in every aspect of our products and services.

Every SFS intec site has its own accreditation to ISO 9001 quality management standard. Moreover, a complete network of manufacturing and logistics support centres means maximum product availability.

SFS intec business partners profit from:nCertified quality from our own production plantsnFast, efficient product availability from an international manufacturing and logistics networknFlexible responses to individual needs that only the original manufacturer can truly provide


4.6 08/2011


4

Services Flat Roof


Reliable performance:Tested in-house, confirmed on site.

Future-focused fastener systems

Are the fasteners up to the anticipatedstatic and dynamic loads? Is the fastener seal secure for life? Will wind forces be safely transmitted to the sub-structure? Such questions con-front SFS intec experts day by day.

New solutions are extensively tested in our own in-house laboratories to see how they will perform in practice. One key aspect lies in meeting the require-ments of a diverse range of approvalauthorities. Working hand-in-glove with leading manufacturers of roofing systems, structural components and insulation systems, whilst carrying out our own primary research, we at SFS intec have spearheaded numer-ous trends in modern fastener deve-lopment.

SFS intec fastening systems are checked for:nLong-term behaviour under static and dynamic loadingnCorrosion resistancenEase-of-use and perfect functioning on sitenFulfilment of approval authority requirementsnContinuous production controls

4.708/2011


4

Absolute fastener security

Increased safety requirements; econo-mic, ergonomic and aesthetic conside-rations; meeting the relevant direc-tives and building control guidelines: these and other factors are becoming increasingly important in industrial construction.

That’s why choosing the right fastening system for each specific application is vital. We ensure specifiers, architects and installers have the advice and information needed to choose an appropriate system from the wide range of alternatives available.

Your support team is only a phone call away. Our comprehensive website www.sfsintec.biz provides a wealth of information on optimum fastener technology. Draw on our years of experience in every aspect of faste-ning and fixing to put you in the driving seat when it comes to industrial building.

Services ensuring a secure build:nChoosing the appropriate fastening system at the planning stagenComprehensive analysis of your needs including on-site testsnOptimum supply chain management from plant to sitenOn-site personnel training

The right fastening system every time:Technical advice and support anytime, anywhere.

4.8 08/2011


4

Business Solutions Flat Roof

The right fastening system every time:Technical advice and support anytime, anywhere.

Fast, reliable service wherever you need it

The efficient and timely handling of construction projects is becoming increasingly important as assignments grow in complexity. Efficient supply chain management is therefore gaining in significance.

SFS intec has demonstrated its capabilities in this field in numerous trailblazing projects. Our international presence guarantees the high availabi-lity of market-specific products as well as rapid, reliable service worldwide. You also benefit from simple, efficient ordering, management and delivery processes through tailor-made Busi-ness Solutions in the field of supply chain management. You will find more information about this on pages 13.A to 13.D.

We improve your value chain with:nAn international presencenHigh availability of market-specific productsnGlobal deliverynSpeed and reliabilitynIndividually tailored Business Solutions

High standard of delivery reliability due to local presence:Global supply chain management.

4.908/2011


4

Focused market activities for a wide range of industries:Generating customer benefits as a joint corporate objective.

4.10 08/2011


Development and production partner for precision engineered components and special fasteners for suppliers to the automotive industry operating worldwide.

Development and manufacturing partner for special fasteners and precision engineered components for a range of industrial business sectors.

Mechanical fastening systems and fixing technologies with system accessories for light industrial builds, bolt-on rear ventilated facades, flat roofing and timber engineering..

Mechanical fastening systems for doors and windows; as well as system solutions for glass facades.

FasteningSystems

Hinge technology for doors and windows.

AutomotiveProducts

IndustrialProducts

Attachment

5.1

5

5

08/2011

www.sfsintec.biz

Date post:	31-Jan-2023
Category:	Documents
Upload:	khangminh22
View:	0 times
Download:	0 times

Facade catalogue Innovative fastening systems ... - SFS Group

Documents