Co306 HIGH SECURITY LOCK WITH 3 + 1 LOCKING POINTS CoMETA | Soluzioni per la sicurezza www.cometaspa.com High security lock with automatic mechanical reclosing system, CE certification according to EN 1125 (combined to anti-panic push bar) and EN 179 (combined to handle). Burglar pro- of grade 7 according to EN 12209 and prEN 15685. CERTIFICATION Lock combined to antipanic bar EN 1125 prEN 15685 and EN 12209 7 GRADE SECURITY LOCK BURGLAR PROOF CE CERTIFICATION Lock combined to handle EN 179 CE
Transcript
Co306HIGH SECURITY LOCKWITH 3 + 1 LOCKING POINTS
CoMETA | Soluzioni per la sicurezzawww.cometaspa.com
High security lock with automatic mechanical reclosing system, CE certification according to EN 1125 (combined to anti-panic push bar) and EN 179 (combined to handle). Burglar pro-of grade 7 according to EN 12209 and prEN 15685.
CERTIFICATIONLock combinedto antipanic bar
EN 1125
prEN 15685 andEN 12209
7GRADE
SECURITY LOCKBURGLAR PROOF
CECERTIFICATIONLock combined
to handleEN 179
CE
CoMETA Co3062
Co306HIGH SECURITY LOCK WITH 3 + 1 LOCKING POINTS automatic reclosing system and burglar proof grade 7 certification according to EN 12209 and prEN 15685.
USING Co306 ON EMERGENCY EXIT
On Emergency Exit, the unlocking action from the internal side (protected) is always granted by the presence of the handle or the anti-panic push bar. On the external side, it is possible to unlock the Co306 by:
• European security cylinder
• Excludable handle (in idle mode, it can be activated by remote command, console, web, ect.)
• Motorized, lock opening/closing by remote command
High Security Lock with 3 + 1 locking pointsautomatic mechanical reclosing systemTotally made of steel, high resistance cylindrical bolts, central draught pin and 5 internal sensors (for real-time monitoring).
It can be combined to: handle (according to EN179) or anti-panic push bar (EN1125).
BREVETTATA--------------------PATENTED
High Security Lockfor Emergency ExitsCertified according to UNI EN 1125 (anti-panic devices for emergency exits) in combination with push bar or handle and classified on security top level (grade 7) according to EN 12209 and prEN 15685 (mono-point Locks & Multi-points Locks burglar proof standards).
Available in 3 versions,(different kind of unlocking system)
TOTALLY MECHANICAL AUTOMATIC
MOTORIZEDwith EXCLUDABLE HANDLE
for ACCESS CONTROL
altissima resistenza alla corrosione - resistance to the corrosionper porte oltre i 200 kg. - for doors over the 200 kg.
uso intensivo 200.000 cicli - intensive use 200.000 cyclessicurezza sui beni - security
UNI EN 12209 - CE
UNI EN 1125:2008 - CE 3 7 7 0 1 4 2 1 A B
sicurezza sui beni - security
7
Requirements for escape-routes
Requirements for burglar proof resistance
prEN 15685 - CEsicurezza sui beni - security
7Requirements for burglar proof resistance
CoMETA Co306 Security Locks 3
[A] N. 3 cylindrical bolts (made of M340 steel). The bolts release (door closing) always happens automatically, without any manual operation.
[A2] Mechanical defense block, it prevents latches from receding when they are attacked with axially directed forces
[B] Latch for bolts release (automatic door closing)
[C] Central draught pin (steel)
[D] Aluminium or steel “U” shaped front plate
[E] Containment boxes in stainless steel AISI 316
[F] Internal parts in tropicalized steel
[G] Internal sensors with the following functions: [G1] Door alignment [G2] Status of locked bolts [G3] Door opening by cylinder [G4] Door opening from internal side [G5] Door opening from external side
[H] Handle or Push Bar adapter for door opening from inside
[I] Handle adapter for door opening from outside by electrical command
[L] European cylinder for external key opening
The Co306IM (motorized) has all the features of the standard Co306 (as above) with the addition of:
[M] Internal motorization and control electronic board, they allows remotely opening/closing commands:• The “opening” command will automatically unlock the bolts• The “closing” command will automatically push the bolts out and lock
the door, but it will happens only if/when the strikeplate is aligned to the door frame
[A]
[C]
[B]
[D]
[E]
[G1]
[F]
The Co306IE (with excludable handle) has an internal mechanism for the exclusion system management, thanks to which the handle is normally disabled (idle mode), it will be enabled when it will receive an electrical command. The exclusion system is needed for any kind of Access Control application where the security is mandatory. The door opening from external side can be enabled only by remote command (console, access control system, web, etc.).
[N] Internal mechanism for handle esclusion.
[M]
[N]
Co306EMERGENCY EXIT SECURITY LOCK with automatic reclosing system and opening/closing real-time monitoring.
FEATURES OF THE MOTORIZED Co306
FEATURES OF THE Co306 WITH EXCLUDABLE HANDLE
[G4] [G5]
[G2]
[G3]
[A2]
FEATURES OF THE MECHANICAL Co306
CoMETA Co3064
BURGLAR-PROOF FEATURESHIGH SECURITY LOCK Co306a garantee of high quality product & top burglar-proof level
1200
9345
323
224
360
9362
7
27
100
50
0
500
100
31
48
40,5
22
Dimensions
Total height: 1200 mm
Front plate width: 27 mm
Lock body width: 22 mm
Max embed: 48 mm
Central draught pin
• Made of steel
“U” shaped front plate
• Made of aluminium or steel
Cylindrical Bolts
• N. 3 bolts
• Made of hardened steel M340
• Bolt stroke 25 mm
• Bolt diameter 15 mm
• Resistant to drilling and cutting
• Horizontal translation movement: it impedes attacks with vertical movements from bottom to top and viceversa, weak point of the other tilting mechanisms.
• Locked Bolts Stopper: when Bolts are locked, a mechanical block prevents them from retreating when attacked with axially directed forces.
CoMETA Co306 Security Locks 5
Aluminium containers with integrated Lock Co306 to be installed on the exter-nal side of the door.
Co306 FOR EXTERNAL APPLICATIONSON EXISTING DOORS lock can be mounted on the door with a simple kit
The KIT consists of 2 aluminium profiles with a section of W 60mm and D40 mm, to be installed on the existing door (one on the frame and the other on the door leaf).
Installation benefits:
• Easier installation• Easier adjustment of clearance and distance between the lock front
and the strikeplate• Increased stability and reliability of the system on compromised
doors (altered by time)
External application
In order to solve the problems related to existing doors on which it is no longer possible to install recessed locks, CoMETA designed a special external Lock application in combination with anti-panic push bar.
KIT Co306.APP
CoMETA Co3066
Co3M3 è equipaggiato con un meccanismo di azionamento progettato in conformità alla norma EN1125 e offre la massima affidabilità, sicurezza e affidabilità nel tempo confermata anche dalla certificazione rilasciata da ente terzo (Istituto Giordano).
Maniglione dal design moderno con linee smussate. Prodotto solido garantito dai materiali utilizzati per realizzarlo (completamen-te in acciaio, non sono presenti elementi plastici). Finitura INOX, rappresenta la soluzione ideale anche in ambienti di prestigio per uscite di emergenza moderne e dall’estetica accattivante. Co3M3 garantisce elevate prestazioni.
ANTI-PANIC PUSH BARCo3M3 in combination with the Lock Co301 or Co306.
HANDLECYM1M01036 compliant to EN 179 standard, in combination with the Lock Co301 or Co306.
110 mm
1020 / 1320 mm37
9
239
mm
9230
20
110 mm 119 mm
Certified Push Bar
To maintain the UNI EN 1125 certification, the Co306 lock (3 + 1 points oflocking points) or Co301 (with 1 + 1 locking points) must always be combined withthe Co3M3 push bar.
Certified Handle
To maintain the UNI EN 179 certification, the Co306 lock (3 + 1 points oflocking points) or Co301 (with 1 + 1 locking points) must always be combined with the handle CYM1M01036.
CoMETA Co306 Security Locks 7
GRADE 7Resistance to axial load, with burglary attempt: 600 Kg on each cylinder.
GRADE 7Resistance to lateral load, with burglary attempt: 1000 Kg on each cylinder.
GRADE 7Resistance to attacks with drill: 10 minuti
GRADE 7Security: maximum grade.
The big record numbersDATA GUARANTEED BY PRODUCT TESTS AND CERTIFICATIONS according to different standards: EN 1125, EN 12209, prEN 15685.
The Locks Co306 are equipped with a special mechanism that ensures the automatic mechanical re-locking. The bolts release (door locking) is always automatic, without any manual action. When the door aligns to the door frame, the three cylindrical steel bolts automatically go out. Thanks to 5 internal sensors, the Lock Co306 can also give a real-time monitoring about it own performance (door alignment, status of locked bolts, door opening from inside, from outside by cylinder, from outside by handle, etc.). Information is displayed on the control panel or by a third part Access Control System.
Automatic re-locking mechanical systemAll the Security Locks Co306 have an internal special mechanism that allows a solid automatic mechanical reclosing system. The closing bolts are automatically released when the door leaf aligns to the door frame.
AUTOMATICRE-LOCK
Certified Security Lock according tofor escape-route anti-panic devices
UNI EN 12209 and prEN 15685Certified Security Lock according to burglar proof top level performance
UNI EN 1125
GRADE 7Door weight: over 200 Kg (maxi-mum grade). The Co306 goes further, supporting up to 300 Kg.
CO301IDX11HPC0U Co301 version with 1 + 1 locking points, base version. Totally me-chanical, with internal monitoring sensors.
DXright hand √ √ √
CO301ISX11HPC0U SXleft hand √ √ √
CO301IED11HPC2U Co301 version with 1 + 1 locking points, with internal exclusion sy-stem on external side handle (for Access Control).
DXright hand √ √ √ √ √***
CO301IES11HPC2U SXleft hand √ √ √ √ √***
CO301IMD11HRC2U Co301 version with 1 + 1 locking points, motorized with integra-ted electronics for Access Control and remotely opening/closing com-mands.
DXright hand √ √ √ √
CO301IMS11HRC2U SXleft hand √ √ √ √
CO306IDX11HPC0U Co306 version with 3 + 1 locking points, base version. Totally me-chanical, with internal monitoring sensors.
DXright hand √ √ √
CO306ISX11HPC0U SXleft hand √ √ √
CO306IED11HPC2U Co306 version with 3 + 1 locking points, with internal exclusion sy-stem on external side handle (for Access Control).
DXright hand √ √ √ √ √***
CO306IES11HPC2U SXleft hand √ √ √ √ √***
CO306IMD11HRC2U Co306 version with 3 + 1 locking points, motorized with integra-ted electronics for Access Control and remotely opening/closing com-mands.
DXright hand √ √ √ √
CO306IMS11HRC2U SXleft hand √ √ √ √
(*) Compliant to UNI EN 179 - According to Italian D.M. 3 nov. 2004: in public places (open to the public) the door can be used by less than 10 people. In private places (not open to the public) the door can be used by more than 9 and less than 26 people.
(**) Compliant to UNI EN1125 - According to Italian D.M. 3 nov. 2004: in public places (open to the public) the door can be used by more than 9 people. IIn private places (not open to the public) the door can be used by more than 25 people.
(***) The electronic contact enables the external handle system that can be used for door opening.
TableHIGH SECURITY LOCKS Co301 AND Co306 in combination to anti-panic push bar Co3M3 or handle CYM1M01036.
Product Code Details Variants
Aluminiumcontainer
CO301APPDX.001Container in gold anodized aluminium, for external mounting on the existing door, consisting of 2 tubulars (60*40 mm), one for the lock and one for the strikeplate. For Co301 Lock with 1 + 1 locking points.
DXright hand
CO301APPSX.001 SXleft hand
CO306APPDX.001Container in gold anodized aluminium, for external mounting on the existing door, consisting of 2 tubulars (60*40 mm), one for the lock and one for the strikeplate. For Co306 Lock with 3 + 1 locking points.
DXright hand
CO306APPSX.001 SXleft hand
Handle CYM1M01036 Handle with stainless steel finishing, reversible (complete with internal handle, external). EN179 certified in combination with Co306 or Co301.
Push bar Co3M3 Anti-panic push bar with stainless steel finishing, EN1125 certified in combination with Co301 or Co306 Lock.
TableACCESSORIES FOR Co301 AND Co306
CoMETA Co306 Security Locks 9
Certification / CertificazioneCertification of Performance according to EN1125.Certificato di Costanza della Prestazione secondo la normativa EN1125.
CoMETA Co30610
Page 2
CoMETA Co306 Security Locks 11
Certification / CertificazioneTesting Report according to EN12209.Rapporto di Prova secondo la normativa EN12209.
Contents inside this document are exclusive property of CoMETA S.p.A. and are to be considered indicative and not binding for the owner. CoMETA S.p.A. forbids the usage, the copy and the alteration of these contents, except of explicit consent. I contenuti presenti in questo documento sono di proprietà di CoMETA S.p.A. e sono da ritenersi puramente indicativi e non vincolanti per il proprietario. CoMETA S.p.A. vieta l’uso, la riproduzione e le modifiche dei contenuti presenti in questo documento.
CoMETA S.p.A.Headquarters - Firenze, Italia
Via Leonardo da Vinci, 116 - 50028 Barberino TavarnelleTel: +39 055 8070303 - Fax: +39 055 8070505
