Inverter/Vector Motors & Controls

197

Inverter/Vector Motors & Controls

Baldor•Reliance Variable Speed motors are specifically designed for variable speed control. The platform provides constant torque across the entire operating speed range in traditional NEMA and IEC designs or a power dense laminated steel square frame. Controlling a motor with variable frequency power has never been easier when using a Baldor•Reliance variable speed motor.

Designed specifically for adjustable frequency power operation and full compliance with MG-1 Part 31.

1/3 - 1000 Horsepower

Product Line - DPG-FV, TEBC, TEFC, TENV enclosures RPM AC RPM XE RPM AC PM V*S Master Inverter Duty

Frame sizes FL/RL180 -FL/RL440 FL180 - FL280 FL180 - FL280 56C - 449T 56C - 326T

Electrical Features

Designed for adjustable frequency power and complies with MG1 - part 31 for corona free operation S S S S S

Constant torque performance down to zero speed 1000:1 S S S S S

Provisions for encoder mounting S - S S S

Vector Duty - stocked with encoder mounted S - S S S

Class H insulation S S S - S

Class F insulation - - - S -

PM synchronous rotor technology for improved efficiency and increased power density - S S - -

Low rotor inertia for high dynamic performance S (1) S - -

Suitable for across the line operation - S - - S

Winding thermal protection with quantity 3 N/C thermostats, one per phase S - S S S

F rise or better for longer motor life - S S S S

PM sensorless control - S - - -

Mechanical Features

Laminated steel frame RL/FL 180 - 440 S S S - -

Cast iron frame 180 - 440 - - - S S

Power dense designs - fits where other motors can't S S S - -

Standard NEMA mounting for ease interchangability - - - S S

DPG-FV enclosure S - S - -

TEBC enclosure S - S - S

TEFC enclosure S S S S -

TENV enclosure S - S S S

Includes in-line blower S - - - S

S = Standard(1) Provided with power drive ratings

For more information visit baldor.com

Grin

ders

Defin

ite P

urpo

seM

otor

sUn

it Ha

ndlin

gM

otor

sBr

ake

Mot

ors

IEC

Fram

eM

otor

s50

Her

tzM

otor

sIn

verte

r/Vec

tor

Mot

ors

& Co

ntro

lsDC

Mot

ors

and

Cont

rols

Gear

mot

ors

and

Gear

Pro

duct

sM

otor

Acce

ssor

ies

198


AC Motor Adjustable Speed Range CapabilitiesInverter Drive, Vector Drive, V*S Master and RPMAC MotorsInverter Drive, Vector Drive, V*S Master and RPMAC Motors exceed all requirements of NEMA MG-1 Parts 30 and 31 for AC induction motors powered from adjustable speed inverter control. Satisfactory motor performance depends on proper drive setup.Super-E® MotorsSuper-E motors are Inverter-Ready and meet NEMA MG 1 Part 31.4.4.2. Super-E motors are suitable for use with inverter drives. Motor inverter setup is unique to each specific application. Proper setup and wiring procedures must be closely followed.Application ConsiderationsIt is necessary that motor-drive applications are commissioned by persons familiar with the operation and setup of adjustable speed drives, applicable electrical codes and any other regulations.Each drive must be tuned to the motor for the specific application. System operating parameters must be checked, including voltage at motor power leads, to insure that motor/drive setup has been successfully completed.Applications that are not properly setup can lead to substandard performance and failure of system components. In some installations, shaft grounding and isolated bearings may prevent bearing fluting and are available as an option or through Mod Express.Reference the chart below for constant torque and variable torque capabilities for each product family. Torque performance depends upon proper drive setup.Motors 48 body style and smaller are suitable for maximum 230V inverter operation.Efficiency SavingsSignificant energy savings can be achieved when applying Inverter Ready motors such as the Baldor Super-E to centrifugal load applications (fan and centrifugal pump) and running at reduced speed taking advantage of the affinity laws where motor load and corresponding energy consumption is reduced by the cube of the speed.

Family Enclosure Frame Size Constant Torque Variable Torque CommentsSuper-E® Motors 230, 460 and 575 Volts (2)

EM TEFC

56-210 (1) 20:1 20:1

General Purpose Premium Efficient250-320 10:1 20:1360-400 4:1 20:1444-449 2:1 20:1

EM ODP56-210 (1) 10:1 20:1

General Purpose Premium Efficient250-320 5:1 20:1360 - 449 2:1 20:1

ECP/XEX andECP8/841XL

TEFC Please refer to the Severe Duty section Severe Duty Premium Efficient

EWDM TENV,TEFC 56-256 (1) 20:1 20:1 Washdown Duty Premium Efficient

ESS/SSETEFC 56-250 2:1 10:1

Stainless Steel Washdown DutyTENV 56-140 4:1 10:1

Standard-E Motors 230/460 and 575V (2) (3)

M (TEFC)56-326T frames (1) 4:1 20:1

General Purpose motors360T - 449T 2:1 20:1

M (ODP)56-326T frames (1) 4:1 20:1

360T - 449T 2:1 20:1

CP/XT145T frames 4:1 20:1

Severe Duty180T-445T frames 2:1 20:1447T-449T frames 2:1 20:1

WDM 56-215T frames (1) 4:1 20:1 Washdown DutyInverter Duty and Vector Duty Motors 230, 460 and 575 Volts

IDCSWDM TENV 56-140 5:1 10:1 Inverter Duty, Paint FreeIDCSWDM TEFC 56-215 3:1 10:1 Inverter Duty, Paint Free

IDM TEBC 143-5009 1000:1 1000:1 Inverter Duty, Blower CooledIDNM TENV 143-256 1000:1 1000:1 Inverter Duty, Totally Enclosed Non-VentilatedZDM TEBC 143-5009 1000:1 1000:1 Vector Duty, Blower Cooled

ZDNM TENV 143-256 1000:1 1000:1 Vector Duty, Non-VentilatedIDXM TEXP 182-405 2:1 10:1

Inverter Duty, Explosion Proof (2 families) 56-405 10:1 10:1

IDWNM TENV 143-254 1000:1 1000:1 Inverter Duty, Washdown, Non-VentilatedZDWNM TENV 143-254 1000:1 1000:1 Vector Duty, Washdown, Non-Ventilated

V*S Master Motors 230 & 460 VoltsIDNVSM TENV 56-256 1000:1 1000:1 Inverter Duty, TENV, V*S MasterIDVSM TEFC 182-449 1000:1 1000:1 Inverter Duty, TEFC, V*S Master

ZDNVSM TENV 56-256 1000:1 1000:1 Vector Duty, TENV, V*S MasterZDVSM TEFC 182-449 1000:1 1000:1 Vector Duty, TEFC, V*S MasterZDVSCP TEFC-XT 143-326 1000:1 1000:1 Vector Duty, TEFC-XT, V*S Master

RPMAC Motors 230 & 460 IDRPMN TENV FL180-FL210 1000:1 1000:1 Inverter Duty, TENV, RPMACIDRPMN TEFC, TEBC, DPG-FV FL180-FL440 1000:1 1000:1 Inverter Duty, TEFC, TEBC, DPG-FV, RPMACZDNRPM TENV FL180-FL210 1000:1 1000:1 Vector Duty, TENV, RPMACZDRPM TEFC, TEBC FL180-L400 1000:1 1000:1 Vector Duty, TEFC & TEBC, RPMACZDPM TEBC FL180 - FL440 1000:1 1000:1 Vector Duty, TEBC, PM, RPMAC

(1) Baldor type 35M frames and larger(2) For greater speed range capabilities, please select an Inverter Duty®, Vector Duty®, V*S Master or RPM AC type motor, or contact your local Baldor Sales Office for a custom motor design.(3) Standard-E EPAct efficient motors are suitable for use in adjustable speed applications per NEMA MG 1 Part 30.


GrindersDefinite Purpose

Motors

Unit HandlingM

otorsBrake M

otorsIEC Fram

eM

otors50 HertzM

otorsInverter/Vector

Motors & Controls

DC Motors

and ControlsGearm

otors andGear Products

Motor

Accessories

199


Applications:• Centrifugal fan and

pump applications• Continuous applications

demanding the ultimate efficiency

Features:• TEFC, 1800RPM, synchronous speed, Design B• Efficiency two to four levels above NEMA

premium• Power dense designs, 1.15 SF• Suitable for across the line operation• Combined motor + drive premium efficient up to

IE3 performance• Induction/PM design runs in scalar mode

10 thru 150 HpRPM AC, Salient Pole PM Rotor, Three Phase, TEBC

MUST BE APPLIED WITH DRIVE SPECIFICALLY DESIGNED FOR PERMANENT MAGNET ROTOR PERFORMANCE.(a) See notes on inside back flap.(b) The data - including efficiency - is for fundamental sinewave components of amps and volts and does not include losses due to inverter pwm waveshapes. (c) List price includes magnet surcharge and resolver.All TEBC have integral blower rated 230/460 volts 3 phase.

HpBase Speed RPM

C.H.SpeedRPM

NEMA Frame

Catalog Number

List Price (c)

Mult. Sym.

“C” Dim.

Aprx. Wt. (lb)

Full Load Efficiency (b) Voltage Full Load

Amps (b)Rotor Inertia lb-ft^2

Notes (a)

10 1800 3000 FL1831C ZDPM18010C-BV 7,233 E2 22.08 132 94.0 230/460 10.6 0.46 8, 77, 9115 1800 3000 FL1838C ZDPM18015C-BV 7,315 E2 22.71 158 94.6 460 16.0 0.63 8, 77, 9220 1800 3000 FL1844C ZDPM18020C-BV 8,892 E2 25.96 180 94.7 460 21.7 0.77 8, 77, 9225 1800 3000 FL1852C ZDPM18025C-BV 8,913 E2 27.96 209 95.1 460 26.6 0.96 8, 77, 9230 1800 3000 FL1852C ZDPM18030C-BV 8,913 E2 27.96 209 94.7 460 32.3 0.96 8, 77, 9240 1800 3000 FL2162 ZDPM21040-BV 9,339 E2 28.55 290 94.5 460 43.2 2.14 8, 77, 9350 1800 3000 FL2168 ZDPM21050-BV 9,674 E2 30.06 325 94.8 460 53.4 2.60 8, 77, 9360 1800 3000 FL2173 ZDPM21060-BV 10,597 E2 31.31 355 94.8 460 65.7 2.99 8, 77, 9375 1800 3000 FL2578 ZDPM25075-BV 17,411 E2 33.85 540 95.8 460 81.8 4.90 8, 77, 93100 1800 3000 FL2586 ZDPM25100-BV 18,448 E2 35.85 605 95.7 460 110.6 5.83 8, 77, 93125 1800 3000 FL2882 ZDPM28125-BV 19,486 E2 39.27 730 95.9 460 137.0 8.82 8, 77, 93150 1800 3000 FL2890 ZDPM28150-BV 20,523 E2 41.27 805 96.0 460 168.0 10.56 8, 77, 93

10 thru 125 HpRPM XE, Sensorless PM, eXtreme Efficiency, Totally Enclosed, Severe Duty, 460 Volts

Applications:• Extruders, conveyors, crane

and hoist• Web processing, process

control, test stands• Winders, line shaft printing,

traction

Features:• PM premium efficient design • Power dense square laminated frame• Resolver feedback • Low FLA and optimized power factor• 1000:1 constant torque• 3 thermostats, one per phase

Hp RPM Frame EnclCatalog List Mult. "C" Aprx. * Full Load

VoltageFull Load Dimension

Notes (a)Number Price Sym. Dim. Wt. (lb) Efficiency Amps (b) Sheet

10 1800 FL1838 TEFC XEFRPM18104 2,585 E2 21.76 158 93.0 460 10 617229-001 7715 1800 FL1844 TEFC XEFRPM18154 3,295 E2 23.26 180 93.6 460 15 617232-001 7720 1800 FL1848* TEFC XEFRPM18204 3,535 E2 24.26 194 94.1 460 20 617511-200 7725 1800 FL2158 TEFC XEFRPM21254 4,625 E2 25.49 270 95.0 460 25 619697-901 7730 1800 FL2162 TEFC XEFRPM21304 5,490 E2 26.49 290 95.0 460 30 617517-001 7740 1800 FL2562 TEFC XEFRPM25404 7,180 E2 27.79 410 95.8 460 40 619698-901 7750 1800 FL2570 TEFC XEFRPM25504 8,430 E2 29.79 475 96.2 460 50 617573-001 7760 1800 FL2873 TEFC XEFRPM28604 11,300 E2 32.34 635 96.5 460 60 617512-200 7775 1800 FL2882 TEFC XEFRPM28754 13,200 E2 34.59 720 96.8 460 75 617242-001 77100 1800 FL2898 TEFC XEFRPM201004 17,330 E2 38.59 880 96.8 460 100 617248-001 77125 1800 FL2898 TEFC XEFRPM281254 20,490 E2 38.59 880 96.8 460 125 617248-001 77

* Efficiency as measure on sine wave power. Permium efficient (IE3) levels on AF power(a) See notes on inside back flap.(b) The data - including efficiency - is for fundamental sinewave components of amps and volts and does not include losses due to inverter pwm waveshapes. Red Catalog Number indicates NEW Product.

NEW!


Grin

ders

Defin

ite P

urpo

seM

otor

sUn

it Ha

ndlin

gM

otor

sBr

ake

Mot

ors

IEC

Fram

eM

otor

s50

Her

tzM

otor

sIn

verte

r/Vec

tor

Mot

ors

& Co

ntro

lsDC

Mot

ors

and

Cont

rols

Gear

mot

ors

and

Gear

Pro

duct

sM

otor

Acce

ssor

ies

200



and hoist• Web processing, process

control, test stands• Winders• Centrifugal pumps and fans

Features:• Power dense square laminated frame• 1000:1 constant torque• Class H, 40C, 1.0 SF• 3 thermostats, one per phase • For use on inverter only

5 thru 1000 HpRPM AC, Inverter Duty, Three Phase

(a) See notes on inside back flap.(b) The “R1” suffix indicates the latest revision FL or RL from the previous L frame designAll TEBC and DPG-FV have integral blower rated 230/460 volts 3 phase. All TENV, TEFC and TEBC have top mounted conduit box. All DPG-FV are F1.ENCODER MOUNTING PROVISIONS - INCLUDE MACHINED ODE BRACKET AND SHAFT TAPPED FOR STUB SHAFT. FOR CLOSED LOOP CONTROL SEE ENCODER FEEDBACK KITS FOR USE WITH ID-RPM AC MOTORS. FOR RPM AC MOD EXPRESS, CONTACT YOUR BALDOR•RELIANCE SALES OFFICE.Red Catalog Number indicates NEW Product.

HpBaseSpeedRPM

C.H.SpeedRPM

NEMA Frame Enclosure Catalog

Number (b)List

PriceMult. Sym.

“C” Dim.

Aprx. Wt. (lb) Voltage Full Load

Amps Notes (a)

5 1800 3500 FL1838C TENV IDNRPM18054C 3,666 E2 18.37 143 230/460 7.2 907 1/2 1800 3500 FL1852C TENV IDNRPM18074C 4,215 E2 21.87 194 230/460 11 91

10 1800 3500FL1844C TEFC IDFRPM18104C 4,376 E2 23.26 179 230/460 13.9 91FL2162C TENV IDNRPM21104C 4,990 E2 23.11 280 230/460 13.6 91

15 1800 3500FL1844C TEBC IDBRPM18154C 4,522 E2 25.33 180 460 21 92FL2162C TEFC IDFRPM21154C 5,450 E2 26.49 290 460 20 92

20 1800 3500FL1852C TEBC IDBRPM18204C 4,983 E2 27.33 209 460 27 92FL2162C TEFC IDFRPM21204C 5,450 E2 26.49 290 460 27 92

25 18003500 FL2162C TEBC IDBRPM21254C 5,800 E2 28.55 290 460 34 923150 FL1844C DPG-FV IDDRPM18254C 5,244 E2 19.87 200 460 33 923500 FL2173C TEFC IDFRPM21254C 5,886 E2 29.50 355 460 34 92

30 18003500 FL2162C TEBC IDBRPM21304C 5,800 E2 28.55 290 460 40 923475 FL1852C DPG-FV IDDRPM18304C 5,456 E2 21.87 230 460 39 923500 FL2570C TEFC IDFRPM25304C 6,195 E2 29.79 475 460 39 92

40 18003500 FL2173 TEBC IDBRPM21404 6,409 E2 31.31 355 460 51 932000 RL2162 DPG-FV IDDRPM21404 6,356 E2 23.12 305 460 52 933550 FL2586 TEFC IDFRPM25404 6,739 E2 33.79 605 460 51 93

501800

3545 FL2570 TEBC IDBRPM25504 7,147 E2 31.85 475 460 65 932400 RL2168 DPG-FV IDDRPM21504 8,556 E2 24.62 345 460 62 933565 FL2882 TEFC IDFRPM28504 11,510 E2 34.59 720 460 64 93

1200 1300 RL2570 DPG-FV IDDRPM25506 10,275 E2 26.38 480 460 64 93

601800


1200 1300 RL2578 DPG-FV IDDRPM25606 12,458 E2 28.38 545 460 73 93

751800


1200 1400 RL2586 DPG-FV IDDRPM25756 16,509 E2 30.38 615 460 91 93

1001800

3555 FL2890 TEBC IDBRPM281004R1 14,259 E2 41.11 805 460 124 932000 RL2578 DPG-FV IDDRPM251004 12,458 E2 28.38 545 460 119 93

1200 1445 RL2882 DPG-FV IDDRPM281006 18,432 E2 31.14 770 460 124 93

1251800

3555 FL2898 TEBC IDBRPM281254 15,089 E2 43.11 890 460 156 933560 L3203 TEBC IDBRPM321254 21,135 E2 44.25 1170 460 150 932330 RL2586 DPG-FV IDDRPM251254 16,509 E2 30.38 615 460 148 93

1200 1970 RL2898 DPG-FV IDDRPM281256 24,030 E2 35.14 930 460 150.9 93

1501800

3560 L3213 TEBC IDBRPM321504 28,276 E2 55.13 1310 460 177 933555 FL3203 TEBC IDBRPM321504R1 28,276 E2 55.13 1310 460 177 932000 RL2882 DPG-FV IDDRPM281504 18,432 E2 31.14 770 460 180 93

1200 1600L3203 DPG-FV IDDRPM321506 28,276 E2 39.88 1185 460 180 93

RL3203 DPG-FV IDDRPM321506R1 28,276 E2 39.88 1185 460 180 93



Motors

Unit HandlingM

otorsBrake M

otorsIEC Fram

eM

otors50 HertzM


Motors & Controls

DC Motors

and ControlsGearm


Motor

Accessories

201


RPM AC, Inverter Duty, Three Phase

HpBaseSpeedRPM

C.H.SpeedRPM


Number (b)List

PriceMult. Sym.

“C” Dim.


Amps Notes (a)

2001800

3500FL3698 TEBC IDBRPM362004R1 29,277 E2 56.30 1950 460 227 93L3614 TEBC IDBRPM362004 31,281 E2 52.87 1700 460 229 93L4022 TEBC IDBRPM402004 33,751 E2 54.12 1750 460 234 93

2700 RL2898 DPG-FV IDDRPM282004 24,030 E2 35.14 930 460 237 93

1200 2000L3213 DPG-FV IDDRPM322006 32,927 E2 42.38 1325 460 236 93


2501800

3500FL3614 TEBC IDBRPM362504R1 31,279 E2 43.47 2000 460 283 93L4034 TEBC IDBRPM402504 39,164 E2 57.12 2150 460 290 93

2945L3203 DPG-FV IDDRPM322504 28,276 E2 39.88 1185 460 295 93


1200 2000RL3698 DPG-FV IDDRPM362506R1 35,848 E2 39.47 1680 460 289 93L3614 DPG-FV IDDRPM362504 41,696 E2 45.00 1715 460 290 93

3001800

3500FL4034 TEBC IDBRPM403004R1 39,163 E2 65.46 2620 460 336 93L4046 TEBC IDBRPM403004 48,044 E2 60.12 2450 460 346 93

3000L3213 DPG-FV IDDRPM323004 32,927 E2 42.38 1325 460 350 93



350 1800 2200RL3698 DPG-FV IDDRPM363504R1 35,848 E2 39.47 1680 460 401 93L3614 DPG-FV IDDRPM363504 41,696 E2 45.00 1715 460 413 93

4001800

2700RL3614 DPG-FV IDDRPM364004R1 41,696 E2 43.47 2000 460 477 93L3614 DPG-FV IDDRPM364004 41,696 E2 45.00 1715 460 459 93

2500 FL4440 TEBC IDBRPM444004 64,562 E2 78.57 3940 460 479 93


5001800

2500 FL4451 TEBC IDBRPM445004 67,889 E2 78.57 4260 460 591 93

2400RL4022 DPG-FV IDDRPM405004R1 48,367 E2 45.62 2260 460 557 93L4034 DPG-FV IDDRPM405004 55,045 E2 52.00 2050 460 557 94


600 18003000

RL4046 DPG-FV IDDRPM406004R1 67, 101 E2 48.62 2530 460 666 93L4046 DPG-FV IDDRPM406004 67,104 E2 55.00 2000 460 666 94

2500 FL4473 TEBC IDBRPM446004 75,188 E2 86.82 4905 460 708 93



(a) See notes on inside back flap.(b) The “R1” suffix indicates the latest revision FL or RL from the previous L frame designAll TEBC and DPG-FV have integral blower rated 230/460 volts 3 phase. All TENV, TEFC and TEBC have top mounted conduit box. All DPG-FV are F1.ENCODER MOUNTING PROVISIONS - INCLUDE MACHINED ODE BRACKET AND SHAFT TAPPED FOR STUB SHAFT. FOR CLOSED LOOP CONTROL SEE ENCODER FEEDBACK KITS FOR USE WITH ID-RPM AC MOTORS. FOR RPM AC MOD EXPRESS, CONTACT YOUR BALDOR•RELIANCE SALES OFFICE.Red Catalog Number indicates NEW Product.


Grin

ders

Defin

ite P

urpo

seM

otor

sUn

it Ha

ndlin

gM

otor

sBr

ake

Mot

ors

IEC

Fram

eM

otor

s50

Her

tzM

otor

sIn

verte

r/Vec

tor

Mot

ors

& Co

ntro

lsDC

Mot

ors

and

Cont

rols

Gear

mot

ors

and

Gear

Pro

duct

sM

otor

Acce

ssor

ies

202



and hoist, winders• Web processing, process

control, test stands• Centrifugal pumps and fans

Features:• Power dense square laminated frame• 1000:1 constant torque• Class H, 40C, 1.0 SF• 3 thermostats, one per phase • HS35 encoder feedback, 1024 PPR• For use on inverter only

5 thru 200 HpRPM AC, Vector Duty, Three Phase, Totally Enclosed

HpBase Speed RPM

C.H. Speed RPM


NumberList

PriceMult. Sym.

“C” Dim.


Amps Notes (a)

5 1800 3500 FL1838C TENV ZDNRPM18054C 5,692 E2 17.87 143 230/460 7.2 907 1/2 1800 3500 FL1852C TENV ZDNRPM18074C 6,241 E2 21.87 194 230/460 11 91

10 1800 3500FL1844C TEFC ZDFRPM18104C 6,402 E2 23.26 179 230/460 13.9 91FL2162C TENV ZDNRPM21104C 7,017 E2 22.73 280 230/460 13.6 91

15 1800 3500 FL1844C TEBC ZDBRPM18154C 6,548 E2 25.33 180 460 21 92

20 18003500 FL1852C TEBC ZDBRPM18204C 7,010 E2 27.96 209 460 27 923500 FL2162C TEFC ZDFRPM21204C 7,827 E2 28.55 290 460 27 92

25 1800 3500 FL2173C TEFC ZDFRPM21254C 7,912 E2 31.31 355 460 34 92

30 1800 3500FL2162C TEBC ZDBRPM21304C 7,827 E2 28.55 290 460 40 92FL2570C TEFC ZDFRPM25304C 8,221 E2 29.54 475 460 39 92

40 1800 3500FL2173 TEBC ZDBRPM21404 8,242 E2 31.31 355 460 51 93FL2586 TEFC ZDFRPM25404 8,572 E2 35.85 605 460 51 93

50 1800 3500 FL2570 TEBC ZDBRPM25504 8,981 E2 31.85 475 460 65 9360 1800 3500 FL2578 TEBC ZDBRPM25604 12,383 E2 33.85 540 460 75 9375 1800 3500 FL2586 TEBC ZDBRPM25754 14,432 E2 35.85 605 460 95 93

100 1800 3550 FL2890 TEBC ZDBRPM281004R1 16,091 E2 41.27 805 460 124 93

125 18003550 FL2898 TEBC ZDBRPM281254 16,923 E2 43.27 890 460 156 933500 L3203 TEBC ZDBRPM321254 22,967 E2 44.25 1170 460 150 93

150 1800 3500 L3213 TEBC ZDBRPM321504 30,109 E2 55.13 1310 460 177 93

200 1800 3500L3614 TEBC ZDBRPM362004 33,113 E2 52.87 1700 460 229 93L4022 TEBC ZDBRPM402004 35,581 E2 54.12 1750 460 234 93

(a) See notes on inside back flap.All TEBC have integral blower rated 230/460 volts 3 phase.CONTINUOUS CONSTANT TORQUE TO ZERO SPEED



Motors

Unit HandlingM

otorsBrake M

otorsIEC Fram

eM

otors50 HertzM


Motors & Controls

DC Motors

and ControlsGearm


Motor

Accessories

203


Encoder Feedback Kits1024 pulse per revolution, Includes all Mounting Hardware and Mating ConnectorThe following kits for use with RPM AC motors on previous pages.

CatalogNumber

MotorEnclosure Manufacturer Type Frame Size Mag or

OpticalConnType

Input VoltageVDC

ListPrice

Mult.Sym.

Ap’x. Shpg.Wgt.

417077-136 TENV, DPFV BEI HS35 FL180 - FL/RL440 O MS-ST 5 - 15 1,442 E8 5

417077-208TL TENV, DPFV BEI HS35 FL180 - FL/RL440 O MS-TL 5 - 28 1,442 E8 5

417077-153 TENV, DPFV Dynapar H20 FL180 - FL/RL440 O MS-ST 5 - 15 1,598 E8 9

417077-156 TENV, DPFV Dynapar ST67 FL180 - FL/RL440 M Latch 5 - 15 2,060 E8 9

417077-242TL TENV, DPFV Dynapar HS35R FL180 - FL/RL440 O MS-TL 5 - 26 1,442 E8 6

417077-170 TENV, DPFV Avtron HS35M FL180 - FL/RL440 M MS-ST 5 - 24 1,442 E8 10

417077-133 TEFC BEI HS35 FL180 - FL440 O MS-ST 5 - 15 1,442 E8 5

417077-165 TEBC BEI HS35 FL180 O MS-ST 5 - 15 1,442 E8 10



417077-212TL TEBC BEI HS35 FL250 O MS-TL 5 - 28 1,442 E8 15

417077-213TL TEBC BEI HS35 FL280 O MS-TL 5 - 28 1,442 E8 15

417077-244 TEBC BEI HS35 FL320 - FL440 O MS-TL 5 - 28 - E8 5

417077-167 TEBC Dynapar H20 FL180 O MS-ST 5 - 15 1,598 E8 10



417077-168 TEBC Dynapar ST67 FL180 M Latch 5 - 15 2,060 E8 20




417077-245 TEBC Dynapar ST67 FL320 - FL440 M Latch 5 - 15 - E8 9

417077-173 TEBC Avtron HS35M FL180 M MS-ST 5 - 24 2,060 E8 10




417077-246 TEBC Avtron HS35M FL320 - FL440 M MS-ST 5 - 24 - E8 10

Encoder Feedback Kits RPM AC Designs

(1) Includes FL180, FL210, FL250, RL210, RL250, FL280, RL280, FDL11, FDL13, FDL16, FDL18, RDL13, RDL16 and RDL18(2) Includes FL180, RL210, RL250, RL280, FDL11, RDL13, RDL16 and RDL18

CatalogNumber

MotorEnclosure Type Frame Size Mfg. Mag or

OpticalConnType

Input Voltage VDC

ListPrice

Mult.Sym.

Ap’x. Shpg.Wgt.

417077-153 DPFV H20 FL180-RL280 (2) Dynapar O MS-ST 5-15 1,598 E8 9

417708-85 DPFV H20 L280-L400 Dynapar O MS-ST 5-15 1,598 E8 5

417077-156 DPFV RL67 FL180-RL280 (2) Dynapar M Latch 5-15 2,060 E8 9

417708-87 DPFV RL67 L280-L400 Dynapar M Latch 5-15 2,060 E8 6

417708-120 DPFV RL67 L440 Dynapar M Latch 5-15 2,060 E8 23


Grin

ders

Defin

ite P

urpo

seM

otor

sUn

it Ha

ndlin

gM

otor

sBr

ake

Mot

ors

IEC

Fram

eM

otor

s50

Her

tzM

otor

sIn

verte

r/Vec

tor

Mot

ors

& Co

ntro

lsDC

Mot

ors

and

Cont

rols

Gear

mot

ors

and

Gear

Pro

duct

sM

otor

Acce

ssor

ies

204


Frame Catalog Number List Price Mult. Symbol Dimension Sheet Approx. Wt. (Lb.)FL1831 419914-9A 469 E8 609957-9 13FL1838 419914-9B 469 E8 609957-9 14FL1844 419914-9C 469 E8 609957-9 15FL1852 419914-9D 469 E8 609957-9 17

FL/RL2153 419914-10A 469 E8 609957-10 39FL/RL2158 419914-10B 469 E8 609957-10 27FL/RL2162 419914-10D 547 E8 609957-10 48FL/RL2168 419914-10L 547 E8 609957-10 52FL/RL2173 419914-10M 547 E8 609957-10 28FL/RL2570 419914-10G 547 E8 609957-10 55FL/RL2578 419914-10N 1,525 E8 609957-10 58FL/RL2586 419914-10P 1,485 E8 609957-10 56

FL/RL/L2882 419914-10K 1,006 E8 609957-10 80FL/RL/L2890 419914-10R 1,006 E8 609957-10 80FL/RL/L2898 419914-10S 1,006 E8 609957-10 90FL/RL3203 419914-11P 1,110 E8 609977-10 90FL/RL3213 419914-11R 1,110 E8 609977-10 90

UFL/URL3698 419914-11M 1,300 E8 609977-10 105UFL/URL3699 419914-11C 1,300 E8 609977-10 105UFL/URL3607 419914-11D 1,300 E8 609977-10 74UFL/URL3614 419914-11N 1,300 E8 609977-10 124UFL/URL4022 419914-11E 2,476 E8 609977-10 105UFL/URL4034 419914-11F 2,476 E8 609977-10 132UFL/URL4046 419914-11G 2,476 E8 609977-10 141UFL/URL4429 419914-11H 4,672 E8 609977-10 140UFL/URL4440 419914-11J 4,672 E8 609977-10 150UFL/URL4451 419914-11K 4,672 E8 609977-10 160UFL/URL4461 419914-11L 4,672 E8 609977-10 165

Frame Catalog Number List Price Mult. Symbol Description Approx. Wt. (Lb.)FL180 417077-57 911 A8 Washable Wire Mesh Canister Type 2RL210 417077-59 911 A8 Washable Wire Mesh Canister Type 4RL250 417077-59 911 A8 Washable Wire Mesh Canister Type 4

RL/L280 417077-59 911 A8 Washable Wire Mesh Canister Type 4L320 417077-59 911 A8 Washable Wire Mesh Canister Type 4L360 417077-65 1,165 A8 Washable Wire Mesh Canister Type 7L400 417077-102 1,642 A8 Washable Wire Mesh Canister Type 6L440 417077-124 1,893 A8 Square Replaceable Polyester Type 18

Application: Used for adjustable belt tension on belted application not suitable for wall or ceiling mounting.

RPM AC Slide Bases

Application: For use with DPFV enclosuresRPM AC Filter Kits

Encoder Mounting Kits – no encoderKit includes stub shaft only (no encoder) - unmounted - for RPM AC motor frames FL180-L440.

Encoder(reference) Frame Enclosure Catalog

NumberList

Price Mult.Sym.

BEI HS35(1 inch dia.)

FL180-FL/RL250 (3) DPFV,TENV,TEFC,TEBC (2) 417708-201 240 E8

FL/RL280 thru L400 DPFV & TEBC (2) 417708-202 240 E8

L440 DPFV & TEAO-P/B 417708-203 240 E8

(2) Note: encoder addition requires an extended blower cover on TEBC motors in all frames except L320. Cover is included in complete kits only.(3) Includes FL180, FL210, FL250, RL210, RL250



Motors

Unit HandlingM

otorsBrake M

otorsIEC Fram

eM

otors50 HertzM


Motors & Controls

DC Motors

and ControlsGearm


Motor

Accessories

205


Replacement Blower Kits for DPG-FV RPM AC MotorsKit includes blower motor and shroud, blower wheel and all mounting hardware. Filter is not included.

DPFV Frame Catalog Number List Price Mult. Sym.

RL210 417077-144 897 E8

RL250 417077-145 1,753 E8

RL280 419947-40 1,747 E8

L280 (4) 419947-31 1,747 E8

L320 419947-33 1,944 E8

RL360 419947-41 2,123 A8

L360 (4) 417077-127 2,123 A8

RL400 419947-42 2,324 A8

L400 (4) 417077-75 2,324 A8

L440 417077-126 3,538 A8

Kit includes terminal box and blower motor only.

TEBC Frame Catalog Number List Price Mult. Sym.

FL180 (3) 417077-143 897 E8

FL/RL210-320(3) 417077-141 1,142 E8

(3) Compact inline blower used on stock models (IP44 rating)(4) Being phased out

RPM AC Mounting Conversion Kits for FL180-FL280 FramesKits are for relocation of the conduit box of stock FL180 - FL280 frame motors as noted.Installation of this kit requires complete disassembly/reassembly of motor. Price is for kit only.

Frame Catalog Number List Price Mult. Sym. Enclosure Relocate Conduit Box:

For FL180-FL280 FramesFL180 417077-184 503 E8 TENV, TEBC, TEFC From Top to F-1 or F-2

FL180 417077-185 503 E8 DPFV From F-1 to F-2

FL210 417077-186 591 E8 TENV, TEBC, TEFC From Top to F-1 or F-2

FL250 417077-187 870 E8 TENV, TEBC, TEFC From Top to F-1 or F-2

FL280 417077-201 1,730 E8 TENV, TEBC, TEFC From Top to F-1 or F-2

For RL210-RL280 FramesRL2153 thru RL2173 417077-129 503 E8 DPFV From F-1 to F-2

RL250 thru RL2586 417077-131 503 E8 DPFV From F-1 to F-2

RL2153 thru RL2173 417077-130 591 E8 TENV, TEBC, TEFC From Top to F-1 or F-2

RL2570 thru RL2586 417077-132 591 E8 TENV, TEBC, TEFC From Top to F-1 or F-2

RL2882 thru RL2898 417077-202 632 E8 DPFV From F-1 to F-2


Grin

ders

Defin

ite P

urpo

seM

otor

sUn

it Ha

ndlin

gM

otor

sBr

ake

Mot

ors

IEC

Fram

eM

otor

s50

Her

tzM

otor

sIn

verte

r/Vec

tor

Mot

ors

& Co

ntro

lsDC

Mot

ors

and

Cont

rols

Gear

mot

ors

and

Gear

Pro

duct

sM

otor

Acce

ssor

ies

206


Applications:• Extruders, conveyors,

crane and hoist, winders• Web processing, process

control, test stands• Centrifugal pumps and

fans

Features:• TENV & TEFC, 1000:1CT without blower• Provisions for encoder mounting • 3 thermostats, one per phase• Standard NEMA frame sizes

1/3 thru 300 HpV*S Master Inverter Drive, Three Phase, Totally Enclosed

(a) See notes on inside back flap.CONTINUOUS CONSTANT TORQUE TO ZERO SPEED■ Cast Iron Frame

HpBaseSpeedRPM

C.H.SpeedRPM


NumberList

PriceMult. Sym.

“C” Dim.

Aprx. Wt. (lb)

Full Load Efficiency Voltage Full Load

Amps Notes (a)

1/3 1800 2700 56C TENV IDVSNM3534 495 E2 13.84 32 80 230/460 0.6 2, 481/2 1800 2700 56C TENV IDVSNM3538 579 E2 13.84 35 84 230/460 0.9 2, 483/4 1800 2700 56C TENV IDVSNM3542 645 E2 13.84 36 84 230/460 1.2 2, 48

11800 2700

56C TENV IDVSNM3546 1,048 E2 14.84 45 87.5 230/460 1.5 2, 48143TC TENV IDVSNM3581T 1,315 E2 14.65 58 85.5 230/460 1.5 2, 48143TC TENV IDVSNM3581T-5 1,256 E2 14.65 58 85.5 575 1.2 2, 48

1200 2800 145TC TENV IDVSNM3582T 1,715 E2 14.65 61 82.5 230/460 1.8 2, 48

1 1/2 18002700 145TC TENV IDVSNM3584T-5 1,451 E2 14.65 64 86.5 575 1.7 2, 482700 145TC TENV IDVSNM3584T 1,451 E2 14.65 64 82.5 230/460 2.1 2, 48

2 1800 2700145TC TENV IDVSNM3587T-5 1,448 E2 14.65 62 86.5 575 2.3 2, 48145TC TENV IDVSNM3587T 1,516 E2 14.65 63 86.5 230/460 2.8 2, 48

3 1800 2700182TC TEFC IDVSM3661T 1,674 E2 20.23 105 89.5 230/460 4.1 2, 48182TC TENV IDVSNM3661T 1,722 E2 17.85 111 89.5 230/460 4.3 2, 48

5 1800 2700L184TC TEFC IDVSM3665T 1,941 E2 20.23 120 89.5 230/460 6.6 2, 48L184TC TENV IDVSNM3665T 1,995 E2 17.85 124 89.5 230/460 6.6 2, 48

7 1/2 1800 2700213TC TEFC IDVSM3770T 2,497 E2 24.59 180 91.7 230/460 9.5 2, 48L215TC TENV IDVSNM2237T 2,567 E2 20.86 212 91.7 230/460 10.1 2, 48

10 1800 2700L215TC TEFC IDVSM3774T 3,255 E2 24.59 231 92.4 230/460 12.5 2, 48254TC TENV IDVSNM2238T 3,521 E2 24.05 305 91.7 230/460 13 2, 48

15 1800 2700254TC TEFC IDVSM2333T 3,787 E2 26.71 291 92.4 230/460 18 2, 48256TC TENV IDVSNM2333T 4,235 E2 24.05 284 93.6 230/460 18.5 2, 48

20 1800 2700 256TC TEFC IDVSM2334T 4,106 E2 26.71 321 93 230/460 24 2, 4825 1800 2700 284TC TEFC IDVSM4103T 5,214 E2 30.42 446 93.6 230/460 30 2, 4830 1800 2700 286TC TEFC IDVSM4104T 5,696 E2 30.42 457 94.1 230/460 36 2, 4840 1800 2700 324T TEFC IDVSM4110T 6,571 E2 30.44 619 94.1 230/460 50 2, 4850 1800 2700 326T TEFC IDVSM4115T 8,031 E2 30.28 670 94.5 230/460 60 2, 4860 1800 2700 364T TEFC IDVSM4314T 9,948 E2 33.44 869 94.2 230/460 71.2 2, 4875 1800 2700 365T TEFC IDVSM4316T 12,459 E2 33.44 873 94.3 230/460 89.2 2, 48

100 1800 2700 405T TEFC IDVSM4400T-4 16,102 E2 38.31 1218 94.1 460 115 2, 48125 1800 2700 444T TEFC IDVSM4410T-4 19,987 E2 44.62 1637 94.1 460 150 2, 48150 1800 2700 445T TEFC IDVSM4406T-4 23,853 E2 44.62 1789 95 460 177 2, 48200 1800 2700 447T TEFC IDVSM4407T-4 28,263 E2 48.40 2189 95.4 460 226 2, 48250 1800 2700 449T TEFC IDVSM4408T-4 39,946 E2 53.40 2511 95.8 460 277 2, 48300 1800 2700 449T TEFC IDVSM44304T-4 39,946 E2 53.40 2816 96.2 460 338 2, 48



Motors

Unit HandlingM

otorsBrake M

otorsIEC Fram

eM

otors50 HertzM


Motors & Controls

DC Motors

and ControlsGearm


Motor

Accessories

207





fans

Features:• TENV & TEFC, 1000:1CT without blower• HS35 encoder, 1024 PPR • 3 thermostats, one per phase• Standard NEMA frame sizes

1/2 thru 300 HpV*S Master Vector Drive, Three Phase, Totally Enclosed

HpBaseSpeedRPM

C.H.Speed RPM


NumberList

PriceMult. Sym.

“C” Dim.

Aprx. Wt. (lb)


Amps Notes (a)

1/2 1800 2700 56C TENV ZDVSNM3538 2,136 E2 13.84 37 84 230/460 0.9 2, 46, 483/4 1800 2700 56C TENV ZDVSNM3542 2,201 E2 13.84 38 82.5 230/460 1.1 2, 46, 481 1800 2700 145TC TENV ZDVSNM3581T 2,872 E2 14.65 59 85.5 230/460 1.5 2, 46, 48

1 1/2 1800 2700 145TC TENV ZDVSNM3584T 3,006 E2 14.65 70 86.5 230/460 2.1 2, 46, 482 1800 2700 145TC TENV ZDVSNM3587T 3,315 E2 14.65 66 86.5 230/460 2.8 2, 46, 48

3 1800 2700182TC TEFC ZDVSM3661T 3,508 E2 20.23 118 89.5 230/460 4.1 2, 46, 48182TC TENV ZDVSNM3661T 3,556 E2 17.85 111 89.5 230/460 4.3 2, 46, 48

5 1800 2700L184TC TEFC ZDVSM3665T 3,773 E2 20.23 129 89.5 230/460 6.6 2, 46, 48L184TC TENV ZDVSNM3665T 3,828 E2 17.85 124 89.5 230/460 6.6 2, 46, 48

7 1/2 1800 2700213TC TEFC ZDVSM3770T 4,329 E2 24.59 184 91.7 230/460 9.5 2, 46, 48L215TC TENV ZDVSNM2237T 4,399 E2 20.86 211 91.7 230/460 10.1 2, 46, 48

10 1800 2700L215TC TEFC ZDVSM3774T 5,088 E2 24.59 210 92.4 230/460 12.5 2, 46, 48254TC TENV ZDVSNM2238T 5,354 E2 24.05 325 91.7 230/460 13 2, 46, 48

15 1800 2700254TC TEFC ZDVSM2333T 5,620 E2 26.83 295 92.4 230/460 18 2, 46, 48256TC TENV ZDVSNM2333T 6,069 E2 24.05 348 93.6 230/460 18.5 2, 46, 48

20 1800 2700 256TC TEFC ZDVSM2334T 5,939 E2 26.83 317 93 230/460 24 2, 46, 4825 1800 2700 284TC TEFC ZDVSM4103T 7,046 E2 30.42 458 93.6 230/460 30 2, 46, 4830 1800 2700 286TC TEFC ZDVSM4104T 7,528 E2 30.42 472 94.1 230/460 36 2, 46, 4840 1800 2700 324T TEFC ZDVSM4110T 8,404 E2 33.14 716 94.1 230/460 50 2, 46, 4850 1800 2700 326T TEFC ZDVSM4115T 9,863 E2 33.14 721 94.5 230/460 60 2, 46, 4860 1800 2700 364T TEFC ZDVSM4314T 11,781 E2 33.44 907 94.2 230/460 71.2 2, 46, 4875 1800 2700 365T TEFC ZDVSM4316T 14,292 E2 33.44 944 94.3 230/460 89.2 2, 46, 48100 1800 2700 405T TEFC ZDVSM4400T-4 17,935 E2 38.31 1230 94.1 460 115 2, 46, 48125 1800 2700 444T TEFC ZDVSM4410T-4 21,819 E2 49.07 1667 94.1 460 150 2, 46, 48150 1800 2700 445T TEFC ZDVSM4406T-4 25,685 E2 49.07 1806 95 460 177 2, 46, 48200 1800 2700 447T TEFC ZDVSM4407T-4 30,096 E2 52.36 2203 95.4 460 226 2, 46, 48250 1800 2700 449T TEFC ZDVSM4408T-4 41,779 E2 57.56 2550 95.8 460 277 2, 46, 48300 1800 2700 449T TEFC ZDVSM44304T-4 41,779 E2 57.56 2817 96.2 460 338 2, 46, 48



Grin

ders

Defin

ite P

urpo

seM

otor

sUn

it Ha

ndlin

gM

otor

sBr

ake

Mot

ors

IEC

Fram

eM

otor

s50

Her

tzM

otor

sIn

verte

r/Vec

tor

Mot

ors

& Co

ntro

lsDC

Mot

ors

and

Cont

rols

Gear

mot

ors

and

Gear

Pro

duct

sM

otor

Acce

ssor

ies

208


1 thru 50 Hp




fans

Features:• Designed for harsh, severe duty environments• TENV & TEFC, 1000:1CT without blower• HS35 encoder, 1024 PPR • 3 thermostats, one per phase• Standard NEMA frame sizes

V*S Master Severe Duty Vector Drive, Three Phase, Totally Enclosed

CatalogNumber

MotorEnclosure Type PPR Frame

Size Mfg. Mag or Optical

ConnType

Input Voltage

VDC

ListPrice

Mult.Sym.

Ap’x.Shpg.Wgt.

K99G72 TENV HS35 1024 180T-250T BEI O MS-ST 5-15 1,442 E8 6

K99G74 TENV HS35-2048 2048 180T-250T BEI O MS-ST 5-15 1,442 E8 6

K99G76 TENV HS35 1024 180T-250T BEI O MS-ST 5-24 1,442 E8 6

K99G70 TENV RAHS35M 1024 180T-250T Avtron M MS-ST 5-24 1,442 E8 9

K99G82 TENV HS35R 1024 180T-250T Dynapar O MS-TL 5-26 2,183 E8 6

K99G78 TENV HSD35 1024 180T-250T Dynapar O Latch 5-26 1,622 E8 8

K99G73 TEFC HS35 1024 180T-440T BEI O MS-ST 5-15 1,442 E8 6

K99G75 TEFC HS35-2048 2048 180T-440T BEI O MS-ST 5-24 1,442 E8 6

K99G77 TEFC HS35 1024 180T-440T BEI O MS-ST 5-24 1,442 E8 6

K99G71 TEFC RAHS35M 1024 180T-440T Avtron M MS-ST 5-24 1,442 E8 9

K99G83 TEFC HS35R 1024 180T-440T Dynapar O MS-TL 5-26 2,183 E8 6

K99G79 TEFC HSD35 1024 180T-440T Dynapar O Latch 5-26 1,622 E8 8

K99G80 TENV HS35 1024 180T-250T BEI O MS-TL 5-28 1,442 E8 6

K99G81 TEFC HS35 1024 180T-440T BEI O MS-TL 5-28 1,442 E8 6

NOTE: For 56-320 IDVSM frame sizes use the kits from the IDM product table.

V*S Master Encoder Feedback Kits 360-440 Frame SizeEncoder kits below feature 1024 pulses per revolution unless otherwise noted in the encoder type column. Connector styles include the MS twist lock (MS-TL), military style 10 pin screw tight (MS-ST), and the EPIC latch style (Latch). HS35, RAHS35M and HSD35 feature hollow shaft mounting. The HSD35 carry the Northstar brand. Encoder kits include the encoder and all mounting hardware. IDVSM & IDRPM kits include the mating connector.

HpBaseSpeedRPM

C.H.Speed RPM


NumberList

PriceMult. Sym.

“C” Dim.

Aprx. Wt. (lb)


Amps Notes (a)

1 1800 2700 143TC TENV ZDVSNCP3581T 3,016 E2 14.61 65 87.5 230/460 1.5 2, 46, 481 1/2 1800 2700 145TC TENV ZDVSNCP3584T 3,150 E2 14.61 72 86.5 230/460 2.1 2, 46, 48

2 1800 2700 145TC TENV ZDVSNCP3587T 3,459 E2 14.61 73 86.5 230/460 2.8 2, 46, 483 1800 2700 182TC TEFC ZDVSCP3661T 3,902 E2 20.23 135 89.5 230/460 4.1 2, 46, 485 1800 2700 L184TC TEFC ZDVSCP3665T 4,234 E2 20.23 128 89.5 230/460 6.6 2, 46, 48

7 1/2 1800 2700 213TC TEFC ZDVSCP3770T 4,905 E2 24.58 201 91.7 230/460 9.5 2, 46, 4810 1800 2700 L215TC TEFC ZDVSCP3774T 5,368 E2 24.58 218 92.4 230/460 12.5 2, 46, 4815 1800 2700 254TC TEFC ZDVSCP2333T 6,421 E2 28.14 374 92.4 230/460 18 2, 46, 4820 1800 2700 256TC TEFC ZDVSCP2334T 6,819 E2 28.14 388 93 230/460 24 2, 46, 4825 1800 2700 284TC TEFC ZDVSCP4103T 8,157 E2 30.79 481 93.6 230/460 30 2, 46, 4830 1800 2700 286TC TEFC ZDVSCP4104T 8,760 E2 30.79 494 94.1 230/460 36 2, 46, 4840 1800 2700 324T TEFC ZDVSCP4110T 10,047 E2 33.14 762 94.1 230/460 50 2, 46, 4850 1800 2700 326T TEFC ZDVSCP4115T 11,872 E2 33.14 757 94.5 230/460 60 2, 46, 48




Motors

Unit HandlingM

otorsBrake M

otorsIEC Fram

eM

otors50 HertzM


Motors & Controls

DC Motors

and ControlsGearm


Motor

Accessories

209


1/3 thru 50 HpInverter, Three Phase, TEBC and TENV, C-Face, Foot Mounted

(a) See notes on inside back flap. ■ Cast Iron FrameConstant velocity fan: 115 volts, single phase from 143TC through 184TC and all 575 volt drive motors. Constant velocity fan: 230/460, three phase from 213 TC through 447T.May be converted to C-Face in Mod Express or built as custom motors. Consult District Office for availability of 2 pole motors and C-Face motors for 284T through 5009L frames.1000:1 CONSTANT TORQUE SPEED RANGE

HpBaseSpeedRPM

C.H.Speed RPM


NumberList

PriceMult. Sym.

“C” Dim.

Aprx. Wt. (lb)

Full Load Efficiency Voltage

Full Load Amps

Notes (a)

1/3 1800 2700 56C TENV IDNM3534 495 E2 13.84 33 80 230/460 0.6 2, 8, 601/2 1800 2700 56C TENV IDNM3538 579 E2 13.84 31 80 230/460 0.8 2, 8, 603/4 1800 2700 56C TENV IDNM3542 645 E2 13.84 33 78.5 230/460 1.4 2, 8, 60

11800 2700

143TC TENV IDNM3581T 1,315 E2 14.65 58 85.5 230/460 1.5 2, 8, 60143TC TEBC IDM3581T 1,737 E2 19.00 65 87.5 230/460 1.5 2, 8143TC TEBC IDM3581T-5 1,737 E2 19.02 65 85.5 575 1.2 2, 8

1200 1800 145TC TEBC IDM3582T 2,040 E2 19.02 68 82.5 230/460 1.8 2, 8

1.51800 2700

145TC TENV IDNM3584T 1,451 E2 14.65 58 84 230/460 2.3 2, 8, 60145TC TEBC IDM3584T 1,837 E2 19.02 70 88.5 230/460 2.1 2, 8145TC TEBC IDM3584T-5 1,837 E2 19.02 70 88.5 575 1.7 2, 8

1200 1800 182TC TEBC IDM3667T 2,294 E2 21.71 107 87.5 230/460 2.5 2, 8

21800 2700

145TC TEBC IDM3587T 1,964 E2 19.02 72 88.5 230/460 2.7 2, 8145TC TEBC IDM3587T-5 1,964 E2 19.02 73 88.5 575 2.3 2, 8145TC TENV IDNM3587T 1,516 E2 14.65 67 86.5 230/460 2.8 2, 8, 60182TC TENV IDNM3669T 1,759 E2 17.21 94 84 230/460 2.9 2, 8, 60

1200 1800 184TC TEBC IDM3664T 2,356 E2 21.71 124 88.5 230/460 3.2 2, 8

31800 2700

184TC TEBC IDM3661T 2,509 E2 21.71 111 89.5 230/460 4.1 2, 8184TC TEBC IDM3661T-5 2,509 E2 21.71 112 89.5 575 3.3 2, 8184TC TENV IDNM3661T 1,986 E2 17.21 108 88.5 230/460 4.2 2, 8, 60

1200 1800 213TC TEBC IDM3764T 3,082 E2 29.14 187 90.2 230/460 4.5 2, 8, 70

51800 2700

184TC TEBC IDM3665T 2,654 E2 21.71 124 90.2 230/460 6.5 2, 8184TC TEBC IDM3665T-5 2,654 E2 21.71 124 90.2 575 5.2 2, 8184TC TENV IDNM3665T 2,215 E2 17.21 116 89.5 230/460 6.6 2, 8, 60213TC TENV IDNM3767T 2,469 E2 20.40 170 89.5 230/460 6.7 2, 8, 60

1200 1800 215TC TEBC IDM3768T 3,772 E2 29.14 226 90.2 230/460 7.3 2, 8, 70

7.51800 2700

213TC TEBC IDM3770T 3,200 E2 29.14 170 91.7 230/460 9.5 2, 8, 70213TC TEBC IDM3770T-5 3,200 E2 30.07 170 91.7 575 7.5 2, 8, 70254TC TENV IDNM2237T 3,071 E2 24.05 242 90.2 230/460 9.1 2, 8, 60213TC TENV IDNM3770T 2,563 E2 20.40 196 91.7 230/460 10.1 2, 8, 60

1200 1800 254TC TEBC IDM2276T 5,423 E2 33.07 332 91 230/460 10.7 2, 8, 70

101800 2700

215TC TEBC IDM3774T 3,428 E2 29.14 231 92.4 230/460 12.5 2, 8, 70215TC TEBC IDM3774T-5 3,428 E2 30.07 231 92.4 575 10 2, 8, 70256TC TENV IDNM2238T 3,213 E2 24.05 286 91.7 230/460 13 2, 8, 60

1200 1800 256TC TEBC IDM2332T 6,626 E2 33.07 352 91.7 230/460 14.2 2, 8, 70

151800 2700

256TC TEBC IDM2333T 3,726 E2 33.07 318 92.4 230/460 18.1 2, 8, 70256TC TEBC IDM2333T-5 3,726 E2 34.15 318 92.4 575 14.5 2, 8, 70254TC TENV IDNM2333T 3,310 E2 24.05 286 93.6 230/460 18.5 2, 8, 60

1200 1800 284T TEBC IDM4100T 7,855 E2 36.48 450 93 230/460 19.7 2, 8, 45, 70

201800 2700

256TC TEBC IDM2334T 3,980 E2 33.07 333 93 230/460 24 2, 8, 70256TC TEBC IDM2334T-5 3,980 E2 34.15 333 93 575 19 2, 8, 70284T TENV IDNM2334T 4,573 E2 27.36 406 94.5 230/460 25.5 2, 8, 45, 60

1200 1800 286T TEBC IDM4102T 8,844 E2 36.48 455 93 230/460 26 2, 8, 45, 70

251800 2700 286T TEBC IDM4103T 4,908 E2 36.48 417 93.6 230/460 30 2, 8, 45, 701200 1800 324T TEBC IDM4111T 10,079 E2 39.24 557 93 230/460 32 2, 8, 45, 70

301800 2700 286T TEBC IDM4104T 5,629 E2 36.48 464 93.6 230/460 38 2, 8, 45, 701200 1800 326T TEBC IDM4117T 11,217 E2 39.24 628 93 230/460 39 2, 8, 45, 70

40 1800 2700 324T TEBC IDM4110T 7,612 E2 39.24 605 94.5 230/460 47 2, 8, 45, 7050 1800 2700 326T TEBC IDM4115T 8,543 E2 39.24 622 94.5 230/460 57 2, 8, 45, 70

Applications:• Conveyors, pumps, fans, metal

processing• Compressors, test stands,

material handling• Process lines running open loop

Features:• NEMA Premium® efficient designs• Suitable for sine wave operation• In-line blower for 1000:1 constant

torque


Grin

ders

Defin

ite P

urpo

seM

otor

sUn

it Ha

ndlin

gM

otor

sBr

ake

Mot

ors

IEC

Fram

eM

otor

s50

Her

tzM

otor

sIn

verte

r/Vec

tor

Mot

ors

& Co

ntro

lsDC

Mot

ors

and

Cont

rols

Gear

mot

ors

and

Gear

Pro

duct

sM

otor

Acce

ssor

ies

210


1 thru 50 HpVector, Three Phase, TEBC and TENV, C-Face

HpBaseSpeedRPM

C.H.Speed RPM


NumberList

PriceMult. Sym.

“C” Dim.

Aprx. Wt. (lb)


Amps Notes (a)

11800 2700

143TC TEBC ZDM3581T 3,291 E2 19.02 66 87.5 230/460 1.5 2, 8, 46, 60143TC TEBC ZDM3581T-5 3,291 E2 19.02 65 85.5 575 1.2 2, 8, 46143TC TENV ZDNM3581T 2,872 E2 14.65 59 85.5 230/460 1.5 2, 8, 46

1200 1800 143TC TEBC ZDM3582T 3,594 E2 19.02 62 82.5 230/460 1.8 2, 8, 46

1 1/21800 2700

145TC TEBC ZDM3584T 3,392 E2 19.02 70 88.5 230/460 2.1 2, 8, 46, 60145TC TEBC ZDM3584T-5 3,392 E2 19.02 62 87.5 575 1.7 2, 8, 46145TC TENV ZDNM3584T 3,006 E2 14.65 58 84 230/460 2.3 2, 8, 46

1200 1800 182TC TEBC ZDM3667T 3,849 E2 21.71 99 87.5 230/460 2.5 2, 8, 46

21800 2700

145TC TEBC ZDM3587T 3,517 E2 19.02 75 88.5 230/460 2.8 2, 8, 46145TC TEBC ZDM3587T-5 3,517 E2 19.02 74 88.5 575 2.3 2, 8, 46182TC TENV ZDNM3669T 3,315 E2 17.21 95 84 230/460 2.9 2, 8, 46, 60

1200 1800 184TC TEBC ZDM3664T 3,913 E2 21.71 113 88.5 230/460 3.2 2, 8, 46

31800 2700

182TC TEBC ZDM3661T 4,065 E2 21.71 112 89.5 230/460 4.1 2, 8, 46182TC TEBC ZDM3661T-5 4,065 E2 21.71 110 89.5 575 3.2 2, 8, 46184TC TENV ZDNM3661T 3,543 E2 17.21 104 88.5 230/460 4.2 2, 8, 46, 60

1200 1800 213TC TEBC ZDM3764T 4,636 E2 29.14 187 90.2 230/460 4.5 2, 8, 46, 70

51800 2700

184TC TEBC ZDM3665T 4,209 E2 21.71 125 90.2 230/460 6.5 2, 8, 46184TC TEBC ZDM3665T-5 4,209 E2 21.71 125 90.2 575 5.2 2, 8, 46213TC TENV ZDNM3767T 4,024 E2 20.40 173 91 230/460 6.7 2, 8, 46, 60

1200 1800 215TC TEBC ZDM3768T 5,328 E2 29.14 226 90.2 230/460 7.3 2, 8, 46, 70

7 1/21800 2700

213TC TEBC ZDM3770T 4,754 E2 29.14 170 91.7 230/460 9.5 2, 8, 46, 70213TC TEBC ZDM3770T-5 4,754 E2 30.07 170 91.7 575 7.5 2, 8, 46, 70256TC TENV ZDNM2237T 4,627 E2 24.05 242 90.2 230/460 9.1 2, 8, 46, 60

1200 1800 254TC TEBC ZDM2276T 6,979 E2 33.07 333 91 230/460 10.7 2, 8, 46, 70

101800 2700

215TC TEBC ZDM3774T 4,982 E2 29.14 231 92.4 230/460 12.5 2, 8, 46, 70215TC TEBC ZDM3774T-5 4,982 E2 30.07 231 92.4 575 10 2, 8, 46, 70256TC TENV ZDNM2238T 4,770 E2 24.05 284 91.7 230/460 13 2, 8, 46, 60

1200 1800 256TC TEBC ZDM2332T 8,180 E2 33.07 356 91.7 230/460 14.2 2, 8, 46, 70

151800 2700

256TC TEBC ZDM2333T 5,282 E2 33.07 317 92.4 230/460 18.1 2, 8, 46, 70256TC TEBC ZDM2333T-5 5,282 E2 34.15 289 92.4 575 14.5 2, 8, 46, 70254TC TENV ZDNM2333T 4,866 E2 24.05 286 92.4 230/460 18.5 2, 8, 46, 60

1200 1800 284T TEBC ZDM4100T 9,409 E2 36.48 445 93 230/460 19.7 2, 8, 45, 46, 70

201800 2700

256TC TEBC ZDM2334T 5,537 E2 33.07 342 93 230/460 24 2, 8, 46, 70256TC TEBC ZDM2334T-5 5,537 E2 34.15 340 93 575 19 2, 8, 46, 70284T TENV ZDNM2334T 6,129 E2 27.36 405 94.5 230/460 25.5 2, 8, 45, 46, 60

1200 1800 286T TEBC ZDM4102T 10,401 E2 36.48 462 93 230/460 26 2, 8, 45, 46, 70

251800 2700 284T TEBC ZDM4103T 6,461 E2 36.48 416 93.6 230/460 30 2, 8, 45, 46, 701200 1800 324T TEBC ZDM4111T 11,636 E2 38.92 615 93 230/460 32 2, 8, 45, 46, 70

301800 2700 286T TEBC ZDM4104T 7,186 E2 36.48 445 93.6 230/460 38 2, 8, 45, 46, 701200 1800 326T TEBC ZDM4117T 12,773 E2 38.92 624 93 230/460 39 2, 8, 45, 46, 70

40 1800 2700 324T TEBC ZDM4110T 9,166 E2 38.92 610 94.5 230/460 47 2, 8, 45, 46, 7050 1800 2700 326T TEBC ZDM4115T 10,099 E2 38.92 631 94.5 230/460 57 2, 8, 45, 46, 70

(a) See notes on inside back flap.Consult District Office for availability of 2 pole motors and C-Face motors for 284T through 5009L frames.FULL TORQUE AT ZERO SPEED, 1000:1 CONSTANT TORQUE SPEED RANGE.■ Cast Iron Frame

Applications:• Conveyors, pumps, fans, metal

processing• Compressors, test stands,

material handling• Process lines running closed loop• Crane and hoist

Features:• NEMA Premium® efficient designs• Suitable for sine wave operation• In-line blower for 1000:1 constant

torque• HS35 encoder, 1024 PPR



Motors

Unit HandlingM

otorsBrake M

otorsIEC Fram

eM

otors50 HertzM


Motors & Controls

DC Motors

and ControlsGearm


Motor

Accessories

211


Inverter Gearmotors – Right Angle and Parallel Shaft

Applications:• Conveyors, material

handling, packaging, agricultural

• Medical and laboratory equipment

Features:• Inverter ready insulation systems • Industry standard foot prints• High strength bronze gearing in right

angle motors• Hardened helical and spur gearing in

parallel shaft designs• Factory lubricated for life• Non-vented gear housing• UL recognized and CSA certified

IDGM3301

IDGMP25021

NOTE: (a) Vertical motor below gearhead not recommended. Avoiding those positions where the high speed oil seal is immersed in oil, will provide greater security against high speed input seal wear.ATTENTION: Additional ratios, voltages, and ratings are available. Application specific modifications are common, such as custom shaft dimensions, addition of brakes or encoders, specific power cords, and washdown features. Contact your local Baldor representative for assistance.See Gearmotor Section for dimension drawings.

Right Angle Gearmotors

OutputRPM

60 Hz.

Max.Safe Torque

In. Lbs. @ 60 Hz

SpeedRange(CT)

Input Hp Ratio:1 OHL(lbs)

CatalogNumber (a)

ListPrice

Mult.Sym.

Ap’x.Shpg.Wgt.

MotorType &

Gear Style

Voltage@ 60 Hz

FTA Style85 13 28 - 128 1/25 20 1.3 IDGM2401 505 E2 7 2416M-FTA 230170 9 57 - 255 1/25 10 1.3 IDGM2402 505 E2 7 2416M-FTA 230340 5 113 - 510 1/25 5 1.3 IDGM2403 505 E2 7 2416M-FTA 230

D Style5 75 2 - 8 1/20 310 60 IDGM2301 660 E2 10 2416M-DB 23018 75 6 - 27 1/20 90 60 IDGM2302 660 E2 10 2416M-DB 230

E Style9 175 3 - 14 1/12 180 95 IDGM2512 840 E2 15 2512M-EB 23017 125 6 - 25 1/12 100 95 IDGM2511 840 E2 15 2512M-EB 230

B Style29 30 10 - 44 1/20 60 40 IDGM2406 612 E2 13 2512M-BB 23085 25 28 - 128 1/15 20 26 IDGM2405 612 E2 13 2512M-BB 230340 15 113 - 510 1/8 5 5 IDGM2404 612 E2 13 2520M-BB 230

G Style6 400 2 - 9 1/8 280 200 IDGM2515 1,036 E2 20 2516M-G 23014 375 5 - 21 1/6 120 200 IDGM2514 1,036 E2 20 2516M-G 23028 250 9 - 42 1/6 60 200 IDGM2513 1,036 E2 20 2516M-G 230

K Style22 315 7 - 33 3/8 75 120 IDGM2509 868 E2 17 2528M-K 23028 252 9 - 42 3/8 60 120 IDGM2508 868 E2 17 2528M-K 23041 228 14 - 62 3/8 40 120 IDGM2506 868 E2 17 2528M-K 23083 138 28 - 125 3/8 20 120 IDGM2503 868 E2 17 2528M-K 230165 105 55 - 248 3/8 10 120 IDGM2501 868 E2 17 2528M-K 230330 68 110 - 495 3/8 5 120 IDGM2500 868 E2 17 2528M-K 230

HK Style22 315 7 - 33 3/8 75 IDGHM2509 998 E2 19 2528M-HK 23028 252 9 - 42 3/8 60 IDGHM2508 998 E2 19 2528M-HK 23041 228 14 - 62 3/8 40 IDGHM2506 998 E2 19 2528M-HK 23055 195 18 - 83 3/8 30 IDGHM2504 998 E2 19 2528M-HK 23083 138 28 - 125 3/8 20 IDGHM2503 998 E2 19 2528M-HK 230165 105 55 - 248 3/8 10 IDGHM2501 998 E2 19 2528M-HK 230330 68 110 - 495 3/8 5 IDGHM2500 998 E2 19 2528M-HK 230

J Style29 413 10 - 44 1/2 60 125 IDGM3303 942 E2 28 3324M-JH 23058 355 19 - 86 1/2 30 125 IDGM3302 942 E2 28 3324M-JH 230170 230 57 - 255 3/4 10 125 IDGM3301 961 E2 30 3332M-JH 230340 125 113 - 510 3/4 5 80 IDGM3300 961 E2 30 3332M-JH 230


Grin

ders

Defin

ite P

urpo

seM

otor

sUn

it Ha

ndlin

gM

otor

sBr

ake

Mot

ors

IEC

Fram

eM

otor

s50

Her

tzM

otor

sIn

verte

r/Vec

tor

Mot

ors

& Co

ntro

lsDC

Mot

ors

and

Cont

rols

Gear

mot

ors

and

Gear

Pro

duct

sM

otor

Acce

ssor

ies

212


NOTE: (a) Vertical motor below gearhead not recommended. Avoiding those positions where the high speed oil seal is immersed in oil, will provide greater security against high speed input seal wear.ATTENTION: Additional ratios, voltages, and ratings are available. Application specific modifications are common, such as custom shaft dimensions, addition of brakes or encoders, specific power cords, and washdown features. Contact your local Baldor representative for assistance.See Gearmotor Section for dimension drawings.

Parallel Shaft Gearmotors

OutputRPM

60 Hz.

Max.Safe Torque

In. Lbs. @ 60 Hz

SpeedRange(CT)


CatalogNumber (a)

ListPrice

Mult.Sym.

Ap’x.Shpg.Wgt.

MotorType &

Gear Style

Voltage@ 60 Hz

PSSH Style

10 144 3 - 15 1/30 180 125 IDGMP24180 613 E2 11 2412M-PSSH 230

19 144 6 - 29 1/15 90 125 IDGMP24090 613 E2 13 2416M-PSSH 230

28 130 9 - 42 1/15 60 125 IDGMP24060 595 E2 11 2416M-PSSH 230

55 125 18 - 83 1/8 30 125 IDGMP24030 595 E2 14 2424M-PSSH 230

85 142 28 - 128 1/5 20 100 IDGMP24020 561 E2 12 2524M-PSSH 230

167 86 56 - 251 1/4 10 100 IDGMP24010 561 E2 12 2524M-PSSH 230

335 44 112 - 503 1/4 5 100 IDGMP24005 561 E2 12 2524M-PSSH 230

PSM Style9 184 3 - 14 1/25 180 130 IDGMP25181 729 E2 16 2412M-PSM 230

19 176 6 - 29 1/15 90 130 IDGMP25091 729 E2 16 2416M-PSM 230

28 204 9 - 42 1/8 60 130 IDGMP25061 698 E2 14 2424M-PSM 230

56 230 19 - 84 1/4 30 130 IDGMP25031 698 E2 18 2524M-PSM 230

84 166 28 - 126 1/4 20 65 IDGMP25021 698 E2 16 2524M-PSM 230

167 86 56 - 251 1/4 10 65 IDGMP25011 667 E2 16 2524M-PSM 230

335 44 112 - 503 1/4 5 65 IDGMP25006 667 E2 16 2524M-PSM 230

PSL & PSLH Style10 369 3 - 15 1/15 180 200 IDGMP25182 1,059 E2 20 2516M-PSL 230

19 360 6 - 29 1/8 90 200 IDGMP25092 1,059 E2 20 2516M-PSL 230

28 325 9 - 42 1/6 60 200 IDGMP25063 1,044 E2 18 2516M-PSL 230

41 500 14 - 62 3/8 40 300 IDGMP25062 1,037 E2 20 2528M-PSL 230

43 637 14 - 65 1/2 40 300 IDGMP33040 1,037 E2 28 3324M-PSLH 230

55 350 18 - 83 3/8 30 300 IDGMP2505 1,037 E2 20 2528M-PSL 230

56 247 19 - 84 1/4 30 300 IDGMP25033 1,044 E2 18 2524M-PSL 230

57 482 19 - 86 1/2 30 300 IDGMP33030 1,037 E2 28 3324M-PSLH 230

83 233 28 - 125 3/8 20 300 IDGMP2503 1,012 E2 18 2528M-PSL 230

84 167 28 - 126 1/4 20 300 IDGMP25023 1,025 E2 17 2524M-PSL 230

86 326 29 - 129 1/2 20 300 IDGMP33020 1,012 E2 25 3324M-PSLH 230

115 245 38 - 173 1/2 15 300 IDGMP33015 1,012 E2 25 3324M-PSLH 230

165 116 55 - 248 3/8 10 300 IDGMP2501 1,012 E2 18 2528M-PSL 230

167 85 56 - 251 1/4 10 300 IDGMP25013 1,025 E2 17 2524M-PSL 230

172 164 57 - 258 1/2 10 300 IDGMP33010 1,012 E2 25 3324M-PSLH 230

330 58 110 - 495 3/8 5 300 IDGMP2500 1,012 E2 18 2528M-PSL 230

335 44 112 - 503 1/4 5 300 IDGMP25008 1,025 E2 17 2524M-PSL 230

345 82 115 - 518 1/2 5 300 IDGMP33005 1,012 E2 25 3324M-PSLH 230


IDGM3301

IDGMP25021

Applications:• Conveyors, material

handling, packaging, agricultural

• Medical and laboratory equipment

Features:• Inverter ready insulation systems • Industry standard foot prints• High strength bronze gearing in right

angle motors• Hardened helical and spur gearing in

parallel shaft designs• Factory lubricated for life• Non-vented gear housing• UL recognized and CSA certified



Motors

Unit HandlingM

otorsBrake M

otorsIEC Fram

eM

otors50 HertzM


Motors & Controls

DC Motors

and ControlsGearm


Motor

Accessories

213


Applications:• For any MS twist lock encoder

connector• AC or DC motor applications

Features:• Cables with MS twist lock connectors • Various lengths• Twisted pair shielded for electrical noise protection

Feedback Cable Assembly with MS Connector

Catalog Number Cable Extension Length List Price Mult. Sym. Ap’x Shpg. Wgt.CBL015ZD-2 5 Ft = 1.5 Meters 198 E8 1

CBL030ZD-2 10 Ft = 3 Meters 230 E8 1

CBL046ZD-2 15 Ft = 4.6 Meters 263 E8 2

CBL061ZD-2 20 Ft = 6.1 Meters 291 E8 2

CBL091ZD-2 30 Ft = 9.1 Meters 355 E8 3

CBL152ZD-2 50 Ft = 15.2 Meters 477 E8 6

CBL229ZD-2 75 Ft = 22.9 Meters 632 E8 8

CBL305ZD-2 100 Ft = 30.5 Meters 787 E8 8

CBL379ZD-2 125 Ft = 37.9 Meters 943 E8 14

CBL455ZD-2 150 Ft = 45.5 Meters 1,023 E8 15

CBL606ZD-2 200 Ft = 60.6 Meters 1,407 E8 16

Connector Transition (Patch) Cables MS Twist Lock (MS-TL) to MS Screw Tight (MS-ST) and MS Screw Tight (MS-ST) to MS Twist Lock (MS-TL)

Applications:• MS-ST to MS-TL compatible

with stock cable lengths up to 200 feet

Features:• Transition from MS twist-lock (female)

to MS screw- tight (male)• Transition from MS screw-tight (female)

to MS twist-lock (male)• 10 pin connector style

Parallel Shaft Gearmotors

OutputRPM

60 Hz.

Max.Safe Torque

In. Lbs. @ 60 Hz

SpeedRange(CT)


CatalogNumber (a)

ListPrice

Mult.Sym.

Ap’x.Shpg.Wgt.

MotorType &

Gear Style

Voltage@ 60 Hz

PS1200 Style12 1092 4 - 18 1/4 145 442 IDGMP12145 1,265 E2 35 3416M-PS12 230

18 1076 6 - 27 1/3 96 395 IDGMP12096 1,265 E2 35 3416M-PS12 230

21 911 7 - 32 1/3 82 285 IDGMP12082 1,265 E2 35 3416M-PS12 230

40 742 13 - 59 1/2 44 339 IDGMP12044 1,314 E2 40 3420M-PS12 230

60 509 20 - 89 1/2 29 326 IDGMP12029 1,314 E2 40 3420M-PS12 230

92 327 30 - 135 1/2 19 311 IDGMP12019 1,314 E2 40 3420M-PS12 230

131 229 44 - 198 1/2 13 292 IDGMP12013 1,314 E2 40 3420M-PS12 230

156 192 52 - 234 1/2 11 282 IDGMP12011 1,314 E2 40 3420M-PS12 230

284 105 96 - 430 1/2 6 245 IDGMP12006 1,314 E2 40 3420M-PS12 230

Catalog Number Type List Price Mult. Sym. Ap’x Shpg. Wgt.CBLTL2ST MS-TL to MS-ST 400 E8 2

CBLST2TL MS-ST to MS-TL 400 E8 2

NOTE: (a) Vertical motor below gearhead not recommended. Avoiding those positions where the high speed oil seal is immersed in oil, will provide greater security against high speed input seal wear.ATTENTION: Additional ratios, voltages, and ratings are available. Application specific modifications are common, such as custom shaft dimensions, addition of brakes or encoders, specific power cords, and washdown features. Contact your local Baldor representative for assistance. See Gearmotor Section for dimension drawings.Red Catalog Number indicates NEW Product.



Grin

ders

Defin

ite P

urpo

seM

otor

sUn

it Ha

ndlin

gM

otor

sBr

ake

Mot

ors

IEC

Fram

eM

otor

s50

Her

tzM

otor

sIn

verte

r/Vec

tor

Mot

ors

& Co

ntro

lsDC

Mot

ors

and

Cont

rols

Gear

mot

ors

and

Gear

Pro

duct

sM

otor

Acce

ssor

ies

214


Encoder Feedback Kits for IDM, IDNM and IDWNM Motors

NOTE: For 56 and 140 IDVSM frame sizes use the kits from the table above.(1) Being phased out

ENC00NV-B1

ENC02BC-B2

CatalogNumber

TypeEnclosure

DescriptionMagnetic or

OpticalConnector

TypeInput

Voltage

OutputVoltageLimited

NEMAFrame

ListPrice

Mult.Sym.

Ap’x. Shpg.Wgt.

ENC00NV-A2 TENV HS35M Avtron Magnetic TL 5-24 VDC 24 213T-215T 1,442 E8 1ENC00NV-B1 TENV HS25 BEI Optical TL 5-15 VDC 15 56-215T 1,442 E8 2ENC00NV-D2 TENV HS35R Dynapar Optical TL 5-26 VDC 26 56-215T 2,158 E8 4

ENC00NV-D1 (1) TENV HS35 Dynapar Optical TL 5-24 VDC 5 56-215T 1,622 E8 4ENC01BC-B1 TEBC HS25 BEI Optical TL 5-15 VDC 15 143T-215T 1,442 E8 3ENC01BC-D2 TEBC HS35R Dynapar Optical TL 5-26 VDC 26 56-215T 2,158 E8 4

ENC01BC-D1 (1) TEBC HS35 Dynapar Optical TL 5-24 VDC 5 56-215T 1,622 E8 4ENC01NV-A2 TENV HS35M Avtron Magnetic TL 5-24 VDC 24 254T-256T 1,442 E8 1ENC01NV-B2 TENV HS35 BEI Optical TL 5-15 VDC 15 254T-284T 1,442 E8 2ENC01NV-D2 TENV HS35R Dynapar Optical TL 5-26 VDC 26 254T-256T 2,158 E8 4

ENC01NV-D1 (1) TENV HS35 Dynapar Optical TL 5-24 VDC 5 254T-256T 1,622 E8 4ENC02BC-A2 TEBC HS35M Avtron Magnetic TL 5-24 VDC 24 254T-447T 1,442 E8 1ENC02BC-B2 TEBC HS35 BEI Optical TL 5-15 VDC 15 254T-447T 1,631 E8 2ENC02BC-D2 TEBC HS35R Dynapar Optical TL 5-26 VDC 26 254T-447T 1,622 E8 4

ENC02BC-D1 (1) TEBC HS35 Dynapar Optical TL 5-24 VDC 5 254T-447T 1,622 E8 4

For use with Legacy Baldor Motor Designs

Does not fit some legacy 180-440 EM, CP or ECP motors. Contact District Office.

Applications:• For IDM, IDNM and

IDWNM motors

Features:• 1024 Encoder with MS twist lock connector• HS35, HS35M, HS35R and HS25



Motors

Unit HandlingM

otorsBrake M

otorsIEC Fram

eM

otors50 HertzM


Motors & Controls

DC Motors

and ControlsGearm


Motor

Accessories

215


Applications:• For use with legacy Baldor

motor designs• Not suitable for some EM, CP

or ECP motors

Features:• Convert TENV & TEFC to TEBC

Voltage Phase NEMAFrame

CatalogNumber

ListPrice

Mult.Sym.

Ap’x.Shpg. Wgt.

115 1

143TC-145TC BLWL05-L 814 E8 7

182TC-184TC BLWL06-L 917 E8 8

213TC-215TC BLWL07-L 982 E8 21

254TC-256TC BLWL09-L 1,068 E8 28

284TC-286TC BLWL10-L 1,098 E8 35

324TC-326TC BLWL12-L 1,134 E8 46

364TC-365TC BLWL14-L 1,218 E8 55

230/380/460 3

213TC-215TC BLWM07-F 982 E8 20

254TC-256TC BLWM09-F 1,068 E8 30

284TC-286TC BLWM10-F 1,098 E8 35

324TC-326TC BLWM12-F 1,198 E8 46

364TC-365TC BLWM14-F 1,219 E8 55

404TC-405TC BLWM16-F 1,704 E8 70

444TC-447TC BLWM18-F 2,387 E8 87

Constant Velocity Blower Cooling Conversion Kits

NOTE: Blower cooling conversion kits should be further selected by Baldor motor type as noted within the catalog number. As an example: BLWM10-F fits a 310M type also built as a 324-326TC. Does not fit Athens-built 180-440 M, CP or ECP motors.

For use with Legacy Baldor Motor Designs

Does not fit some legacy 180-440 EM, CP or ECP motors. Contact District Office.


Grin

ders

Defin

ite P

urpo

seM

otor

sUn

it Ha

ndlin

gM

otor

sBr

ake

Mot

ors

IEC

Fram

eM

otor

s50

Her

tzM

otor

sIn

verte

r/Vec

tor

Mot

ors

& Co

ntro

lsDC

Mot

ors

and

Cont

rols

Gear

mot

ors

and

Gear

Pro

duct

sM

otor

Acce

ssor

ies


216

ACS55 ACS150 ACS255 ACS255 NEMA 4X

Main Attributes

Starter-style Micro Drive; V/Hz Control, DIN or Panel Mounting, DIP switches and potentiometer configuration, built-in EMC filter.

Component-style Micro Drive; V/Hz Control, DIN or panel mounting, integral LCD control panel and integrated potentiometer, built-in EMC filter.

Starter-style Micro Drive; V/Hz and sensorless Control, integral LED display, Built-In PI Loop; DIN or Panel Mounting.

NEMA 4X Enclosure Micro Drive; V/Hz and sensorless Control; integral control panel, Built-In start/stop, speed potentiometer and disconnect switches.

Hp Range

1~115 V - 0.25 to 0.5 Hp 115 V - 0.5 to 1.5 Hp 1~115 V - 0.5 to 1.5 Hp

1~230 V - 0.25 to 3 Hp 1~230 V - 0.5 to 3 Hp 1~230 V - 0.5 to 5 Hp

3~230 V - 0.5 to 3 Hp 3~230 V - 0.5 to 5 Hp

3~460 V - 0.5 to 5 Hp 3~460 V - 1 to 10 Hp

3~600 V - 0.75 - 20 Hp 3~600 V - 0.75 to 15 Hp

Voltage Range

1~115 V In / 3~230 V Out 1~120 V In / 3~ 230 V Out 1~115 V In / 3~230 V Out

1~230 V In / 3~230 V Out 1~230 V In / 3~230 V Out 1~230 V In / 3~230 V Out

3~230 V In / Out 3~230 V In / Out

3~460 V In / Out 3~460 V In / Out

3~600 V In / Out 3~600 V In / Out

Enclosure Type

UL Type 0 (IP20)

UL Type 0 (IP20) UL Type 1 Kit - Option UL Type 0 (IP20) NEMA 4X (IP66)

Motor Control Mode

Scalar (V/Hz) Scalar (V/Hz) Scalar (V/Hz) Scalar (V/Hz)

Motor Type

Induction Motor Induction Motor Induction Motor Induction Motor

Communications Options

N.A. N.A. Embedded Modbus-RTU Embedded Modbus-RTU

Operator Interface (Control Panel)

DIP switches and potentiometer or PC tool parameter configuration

Integral LCD control panel and integrated potentiometer. FlashDrop configurable

Integral LED and/or remote mount LED Integral LED and/or remote mount LED control panel; Copycat Capability; Speed Pot; Fwd/Rev Switch; Input Disconnect

AC Drives Selection Chart



Motors

Unit HandlingM

otorsBrake M

otorsIEC Fram

eM

otors50 HertzM


Motors & Controls

DC Motors

and ControlsGearm


Motor

Accessories

217


AC Drives Selection ChartACS355 ACS355 NEMA 4X

Main Attributes

Machinery Micro Drive; Open Loop vector or V/Hz control, permanent magnet or induction motor control,PID control, removable LCD, built-in EMC filter, optional advanced or basic LCD control panel.

UL Type 4X Machinery Micro Drive; NSF certified enclosure, Open Loop vector or V/Hz control, permanent magnet or induction motor control, built-in EMC filter PID control, optional built-in disconnect.

Hp Range

1~230 V - 0.5 to 3 Hp 1~230 V - 0.5 to 2 Hp

3~230 V - 0.5 to 15 Hp 3~230 V - 0.5 to 5 Hp

3~460 V - 1 to 30 Hp 3~460 V - 1 to 10 Hp

Voltage Range

1~230 V In / 3~230 V Out 1~230 V In / 3~230 V Out

3~230 V In / Out 3~230 V In / Out

3~460 V In / Out 3~460 V In / Out

Enclosure Type

UL Type 0 (IP20)

UL Type 1 Kit - Option UL Type 4X (IP66)

Motor Control Mode

Open Loop Vector or Scalar (V/Hz) Open Loop Vector or Scalar (V/Hz)

Motor Type

Permanent Magnet or Induction Motor

Permanent Magnet or Induction Motor

Communications Options

CANopen, DeviceNet, EtherNet/IP, EtherCAT, Modbus-RTU, Modbus/TCP, PROFIBUS, Profinet-IO

CANopen, DeviceNet, EtherNet/IP, EtherCAT, Modbus-RTU, Modbus/TCP,PROFIBUS, Profinet-IO

Operator Interface (Control Panel)

Integral or remote mount LCD control panel, optional potentiometer with start/stop switches. Parameter upload and download capable. Assistants mode for quick start-up, DriveWindow Light and FlashDrop configurable.

Integral or remote mount LCD control panel. Parameter upload and download capable. Assistants mode for quick start-up, DriveWindow Light and FlashDrop configurable.

Control Panel Not Included


Grin

ders

Defin

ite P

urpo

seM

otor

sUn

it Ha

ndlin

gM

otor

sBr

ake

Mot

ors

IEC

Fram

eM

otor

s50

Her

tzM

otor

sIn

verte

r/Vec

tor

Mot

ors

& Co

ntro

lsDC

Mot

ors

and

Cont

rols

Gear

mot

ors

and

Gear

Pro

duct

sM

otor

Acce

ssor

ies


218

ACS55AC Micro Drive

1/4 & 1/2 Hp - No EMC Filter 115 Vac 1 Phase - 50/60 Hz1/4 thru 3 Hp - No EMC Filter 230 Vac 1 Phase - 50/60 Hz1/4 & 1/2 Hp - Built-In EMC Filter 115 Vac 3 Phase - 50/60 Hz1/4 thru 3 Hp - Built-In EMC Filter 230 Vac 3 Phase - 50/60 Hz

Applications: Conveyor, gate control, material handling, printing, packaging machinery variable torque or constant torque applications. New installation, replacement and original equipment manufacturer (OEM). Features: Compact size replaces contactors and starters, fast setup, easy configuration. Scalar (Volts per Hertz), with peak overload capacity of 150%, IP20 enclosure. Flexible mounting options - Wall mounting with bracket or DIN rail mounting in either wide or narrow orientation. Option kit has speed potentiometer with two switches Run/Stop and Fwd/Rev, Serial or USB DriveConfig Kit available for volume configuration of un-powered drives.

Performance Features Control Modes Scalar V/Hz

Operator Interface Module Control potentiometers and dip switches, Optional speed potentiometer and control switches

Fault Display Green and red status indication LED's

Programmable Preset Speeds Three (When Programmed with DriveConfig)

Auto Restart 10 in three minutes

Digital Inputs Three, Dedicated: Start, Reverse, & Jog

Digital Inputs Type 12 to 24 VDC, (10V Logic 0) with internal 12 VDC power supply (12 VDC, +/-10%, 30mA max.)

Drive Specifications Analog Inputs: One 0-10 VDC, -10 to 10 VDC or 0/4 - 20mADC

Digital Outputs: One One programmable relay output, Type: NO + NC, Switching capacity: 12-250 VAC / 30 VDC / 0.5A, Current: 10mA - 2A

Overload Capacity Drive Output 150% for 1 min., 180% for 2 sec. at start

Input Voltage Ranges: 110 - 120 VAC, 1-phase & 200 - 240 VAC, 1-phase

Input Voltage Tolerance 10% / -15%

Rated Input Frequency 48 to 63 Hz, maximum rate of change = 17% / sec

Carrier Frequency: 5-16 kHz (5 kHz default)

Operating Temperature: –20° to 40°C; no frost allowed, 50°C if continuous output current is maximum 85% of nominal output current

Volts/Hz Scalar, selectable for linear (CT) or square function (VT)

Frequency Control Range: 0-130 Hz

Accel/Decel: One setting by control potentiometer

Time Range: 0.0 to 30 Seconds

Electronic Motor Overload Over Current Trip

Protective Features Under Voltage Trip Limit 65% of Input Voltage

Over Voltage Trip Limit 130% of Input Voltage

Ground Fault Protection Yes

Output Short Circuit Yes

Over Temperature Heatsink Monitor (90°C / 203°F)

Motor Overtemp Yes

DC Bus Overvoltage DC Bus Level Trip

IGBT Overtemp Yes

Over Current Protected

Loss of Reference Yes

Agency Certifications UL, cUL, CE, RoHS, C-Tick, GOST-R

Service Conditions Altitude: 1,000 m (3,300 ft.). Derate by 1% every 100 m (328 ft.) up to 2,000m (6,600 ft.)

Ambient Temperature: –20° to 40°C; no frost allowed, 50°C if continuous output current is maximum 85% of nominal output current

Relative Humidity: 0% to 95%, non-condensing

Intermittent Overload: 150% overload capacity for up to 1 minute

Vibration In accordance with ISTA 1A



Motors

Unit HandlingM

otorsBrake M

otorsIEC Fram

eM

otors50 HertzM


Motors & Controls

DC Motors

and ControlsGearm


Motor

Accessories

219


CatalogNumber Hp kW Output

AmpsBrakingChopper

FrameSize

ListPrice

MultiplierSymbol

Input voltage = 110 - 120V, 1-phase / Output = 230V, 3-Phase (Drive with no EMC filter)ACS55-01N-01A4-1 0.25 0.18 1.4 - A 156 EN

ACS55-01N-02A2-1 0.5 0.37 2.2 - A 175 EN

Input voltage = 200 - 240V, 1-phase / Output = 230V, 3-Phase (Drive with no EMC Filter)ACS55-01N-01A4-2 0.25 0.18 1.4 - A 156 EN

ACS55-01N-02A2-2 0.5 0.37 2.2 - A 175 EN

ACS55-01N-04A3-2 1 0.75 4.3 - B 212 EN

ACS55-01N-07A6-2 2 1.5 7.6 - C 265 EN

ACS55-01N-09A8-2 3 2.2 9.8 - C 307 EN

Input voltage = 110 - 120V, 1-phase / Output = 230V, 3-Phase (Drive with built-in EMC filter)ACS55-01E-01A4-1 0.25 0.18 1.4 - A 211 EN

ACS55-01E-02A2-1 0.5 0.37 2.2 - A 230 EN

Input voltage = 200 - 240V, 1-Phase / Output = 230V, 3-Phase (Drive with built-in EMC filter)ACS55-01E-01A4-2 0.25 0.18 1.4 - A 211 EN

ACS55-01E-02A2-2 0.5 0.37 2.2 - A 230 EN

ACS55-01E-04A3-2 1 0.75 4.3 - B 266 EN

ACS55-01E-07A6-2 2 1.5 7.6 - D 338 EN

ACS55-01E-09A8-2 3 2.2 9.8 - D 402 EN

ACS55 Ratings & Pricing

NOTES: (1) Refer to User Manual 3AFE68929300 for complete technical information(2) See following page for weights and dimensions


Grin

ders

Defin

ite P

urpo

seM

otor

sUn

it Ha

ndlin

gM

otor

sBr

ake

Mot

ors

IEC

Fram

eM

otor

s50

Her

tzM

otor

sIn

verte

r/Vec

tor

Mot

ors

& Co

ntro

lsDC

Mot

ors

and

Cont

rols

Gear

mot

ors

and

Gear

Pro

duct

sM

otor

Acce

ssor

ies


220

ACS55 Dimensions

Catalog Number Name List Price Mult. Sym.

ACS55-POT Potentiometer, Run/Stop & Fwd/Rev Potentiometer with two switches: Run/Stop and Fwd/Rev Polarity 20 ES

RFDT-02 DriveConfig Kit (USB) The DriveConfig Kit is a PC tool for volume configuration and control of ACS55 drives. The kit enables parameter setting and software updating without the need for a power connection during configuration. The DriveConfig Kit features on-line drive control and monitoring of up to four signals simultaneously.DriveConfig kit includes:

700 ES• Hardware and cables

• PC software

• User manual in English (hard copy and PDF)

• Battery charger

• USB adapter

FrameSize

H1(in)

H2*(in)

W(in)

D(in)

Weight(lb)

A 6.69 5.77 1.77 5.04 1.5

B 6.69 5.77 2.66 5.04 1.5

C 7.60 6.70 2.80 6.30 2.4

D 8.90 8.00 2.70 6.20 2.4

*H2 is without mounting clip

H1

W

D

ACS55 Option Kits



Motors

Unit HandlingM

otorsBrake M

otorsIEC Fram

eM

otors50 HertzM


Motors & Controls

DC Motors

and ControlsGearm


Motor

Accessories

221


ACS150AC Micro Drive

1/2 thru 3 Hp 230 Vac 1 Phase - 50/60 Hz1/2 thru 3 Hp 230 Vac 3 Phase - 50/60 Hz1/2 thru 5 Hp 460 Vac 3 Phase - 50/60 Hz

Applications: Conveyor, gate control, material handling, pump, printing, packaging, food and beverage. Any variable torque or constant torque applications where vector control is not required. New installation, replacement and original equipment manufacturer (OEM). Features: Scalar control for linear (CT) or squared (VT) applications with peak overload capacity of 150% and PID capability. Flexible mounting options - wall with bracket or DIN Rail. IP20 enclosure as standard and NEMA1 option kit. Integrated control panel with keypad and LCD display, integrated speed potentiometer. FlashDrop programming tool for fast and easy parameter selecting and setting of unpowered drives. Easy setup and commissioning with ABB common programming structure. Fast setup with macros. Built-in braking chopper allows connection to remote braking resistor for enhanced performance needs.

Performance Features Control Modes Scalar (V/Hz)Operator Interface Module Integral Drive Mounted with speed potentiometerKeypad Display LCD Graphical DisplayProgrammable Preset Speeds SevenAnalog Outputs NoneAuto Restart Yes – Up to 5 attemptsFrequency Avoidance Three BandsFault History Last Three FaultsDigital Inputs Five Programmable Inputs including pulse train inputDigital Inputs Type PNP & NPN, 12-24 VDC, (10V logic 0), Pulse train 0 to 16 kHz

Drive Specifications Analog Inputs: One 0-10 VDC or 0/4 - 20mADCDigital Outputs: One Programmable Relay Output, NO + NC, 12-250 VAC / 30 VDCOverload Capacity Drive Output 150% for 1 min.Input Voltage Ranges: 200 - 240 VAC; 380 - 480 VACInput Voltage Tolerance 10% / -10%Rated Input Frequency 48 to 63 Hz, maximum rate of change 17% / secondCarrier Frequency: 4-16 kHz (4 kHz default)Operating Temperature: –10° to 40°C; –10° to 50°C w/ 10% derateDynamic Braking Built-in braking chopper (100% braking capability)DC Injection Braking: YesFlux Optimization: Can improve efficiency up to 10% on light loadsVolts/Hz Selectable for linear (CT) or square function (VT)Frequency Control Range: 0-500 HzAccel/Decel: Two independently adjustable sets of rampsTime Range: 0.0 to 1800 SecondsS Curve Accel. & Decel. Yes, with adjustable rounding timeKeypad Speed Control YesSink/Source Inputs Selectable, 24 VDC logicElectronic Motor Overload Protected: Over Current & Over TempPID Control One with PID macro setupEMC Filter 2nd Environment - disconnectableApplication Macros Seven, including Three-wire, Hand/Auto, and PID Control

Protective Features Under Voltage Trip Limit 65% of input voltageOver Voltage Trip Limit 130% of input voltageGround Fault Protection Motor or motor cablesOutput Short Circuit Phase-to-phase on drive outputDrive Overtemperature Heatsink monitor (90°C / 203°F)Motor Overtemperature Protected (I2t)Motor Stall Motor operating in stall regionDC Bus Overvoltage DC bus level tripIGBT Overtemperature Detects IGBT overtempOver Current Over-current trip limit up to 325%Incorrect Wiring Fault for input cables connected to outputLoss of Reference Trips on loss of speed command signalUnderload Motor load too low, load disconnectedSingle Phase Loss of input phase

Agency Certifications UL, cUL, CE, C-tick, RoHS, GOST-R Service Conditions Altitude: 1,000 m (3,300 ft.). Derate by 1% every 100 m (328 ft.) up to 2,000m (6,600 ft.)

Ambient Temperature: –20° to 40°C; no frost allowed, 50°C if continuous output current is maximum 85% of nominal output currentRelative Humidity: 0% to 95%, non-condensingIntermittent Overload: 150% overload capacity for up to 1 minute


Grin

ders

Defin

ite P

urpo

seM

otor

sUn

it Ha

ndlin

gM

otor

sBr

ake

Mot

ors

IEC

Fram

eM

otor

s50

Her

tzM

otor

sIn

verte

r/Vec

tor

Mot

ors

& Co

ntro

lsDC

Mot

ors

and

Cont

rols

Gear

mot

ors

and

Gear

Pro

duct

sM

otor

Acce

ssor

ies


222

ACS150 – 240Vac Ratings & Pricing

Catalog Number Hp kW OutputAmps

BrakingChopper

FrameSize

ListPrice

MultiplierSymbol

Input voltage = 200 - 240V, 1-phase / Output = 230V, 3-phaseACS150-01U-02A4-2 0.5 0.37 2.4 ✓ R0 216 EO

ACS150-01U-04A7-2 1 0.75 4.7 ✓ R1 270 EO

ACS150-01U-06A7-2 1.5 1.1 6.7 ✓ R1 311 EO

ACS150-01U-07A5-2 2 1.5 7.5 ✓ R2 352 EO

ACS150-01U-09A8-2 3 2.2 9.8 ✓ R2 417 EO


ACS150-03U-03A5-2 0.75 0.55 3.5 ✓ R0 243 EO

ACS150-03U-04A7-2 1 0.75 4.7 ✓ R1 270 EO

ACS150-03U-06A7-2 1.5 1.1 6.7 ✓ R1 311 EO

ACS150-03U-07A5-2 2 1.5 7.5 ✓ R1 352 EO

ACS150-03U-09A8-2 3 2.2 9.8 ✓ R2 417 EO


ACS150-03U-01A9-4 0.75 0.55 1.9 ✓ R0 316 EO

ACS150-03U-02A4-4 1 0.75 2.4 ✓ R1 328 EO

ACS150-03U-03A3-4 1.5 1.1 3.3 ✓ R1 362 EO

ACS150-03U-04A1-4 2 1.5 4.1 ✓ R1 396 EO

ACS150-03U-05A6-4 3 2.2 5.6 ✓ R1 441 EO

ACS150-03U-08A8-4 5 4.0 8.8 ✓ R1 564 EO

NOTES: (1) Refer to User Manual 3AFE68576032 for complete technical information(2) See following page for weights and dimensions



Motors

Unit HandlingM

otorsBrake M

otorsIEC Fram

eM

otors50 HertzM


Motors & Controls

DC Motors

and ControlsGearm


Motor

Accessories

223


ACS150 Option Kits

ACS150 Dimensions


MFDT-01 FlashDrop FlashDrop is a powerful palm sized tool for fast and easy parameter selecting and setting. Only the parameters needed in the application are visible. The tool can upload/download parameters, copy parameters between two drives or between a PC and a drive. Includes DrivePM (Drive Parameter Manager) a software tool that can create, edit and copy parameter sets for FlashDrop. The parameter sets can consist of all parameters or only a set of the user parameters.

600 ES

MUL1-R1 NEMA 1 Enclosure Kit This option provides the necessary hardware to modify the ACS150 drive from the standard fingersafe protected chassis to NEMA 1 protection capable of landing conduit. MUL1-R1 kit is used with frame sizes R0 through R2.

75 ES

Frame Size

IP20 (cabinet) / UL Open NEMA 1 / UL Type 1

H1(in)

H2(in)

H3(in)

W(in)

D(in)

Wt.(lb)

H4(in)

H5(in)

W(in)

D(in)

Wt.(lb)

RO 6.65 7.95 9.41 2.76 5.59 2.4 10.12 11.02 2.76 5.59 3.3

R1 6.65 7.95 9.41 2.76 5.592.9 /2.61

10.12 11.02 2.76 5.593.7 /3.52

R2 6.65 7.95 9.41 4.13 5.59 3.3 10.12 11.1 4.13 5.59 4.2

1 UN = 200...240 V: 1.3 kg / 2.9 lb, UN = 380...480 V: 1.2 / 2.9 lb. 2 UN = 200...240 V: 1.7 kg / 3.7 lb, UN = 380...480 V: 1.6 / 3.5 lb. H1 = Height without fastenings and clamping plate H2 = Height with fastenings but without clamping plate H3 = Height with fastenings and clamping plate H4 = Height with fastenings and NEMA 1 connection box H5 = Height with fastenings, NEMA 1 connection box and Hood

H1 H2 H4 H5H3

WW

DD

IP 20/UL Open NEMA 1


Grin

ders

Defin

ite P

urpo

seM

otor

sUn

it Ha

ndlin

gM

otor

sBr

ake

Mot

ors

IEC

Fram

eM

otor

s50

Her

tzM

otor

sIn

verte

r/Vec

tor

Mot

ors

& Co

ntro

lsDC

Mot

ors

and

Cont

rols

Gear

mot

ors

and

Gear

Pro

duct

sM

otor

Acce

ssor

ies


224

ACS255 IP20AC Micro Drive

1/2 thru 1/5 Hp 115 Vac 1 Phase - 50/60 Hz1 thru 20 Hp 600 Vac 3 Phase - 50/60 Hz

Applications: Applications with 115V (for 230V motors) and 600V supply power: conveyors, mixers, pumps, fans, food and beverage variable torque, constant torque or constant horsepower applications. Compact size replaces motor starters/soft starters. New installation, replacement and original equipment manufacturer (OEM). Features: V/Hz control for linear (CT) or squared (VT) applications or Sensorless Vector Control. Overload capacity of 150% for 60 seconds or 175% for two seconds. Built in PI control. IP20 enclosure with wall or DIN rail mounting. Remote mount keypad option kit. Integrated keypad with operator interface and local speed control. Optional drive parameter copying tool. Easy setup and commissioning with ABB common programming structure. Quick start macros for fast commissioning and start-up Built-in braking chopper allows connection to remote braking resistor for enhanced performance needs. Built-in Modbus RTU and relay option kit allows fast system integration.

Performance FeaturesControl Mode

115 VAC: V/Hz and open loop vector600 VAC: V/Hz and open loop vector

Operator Interface Module Integral Drive MountedKeypad Display 6-character LED displayProgrammable Preset Speeds FourAnalog Outputs: one One (0-10 VCD)Auto Restart Yes – Up to 5 attemptsFrequency Avoidance One bandFault History Last four faultsDigital Inputs: four Two programmable digital inputs, two user selectable analog/digital inputs

Drive Specifications Analog Inputs: two 0-10 VDC, 4 - 20mARelay Outputs: one Built-in form C relay, 250 VAC, 6A / 30 VDC, 5AAnalog Output / Digital Output 0-10 VDC: one analog usable for meter (freq., current, voltage) or digital outputOverload Capacity Drive Output 150% for 1 minute and 175% for 2 secondsMaximum Load 1.5 Hp @ 120 V In/230 V Out, 20 Hp @ 600 V In/OutInput Voltage Ranges: 115 VAC (99-126); 600 VAC (450-660)Rated Input Frequency 50-60 Hz (±5%)Safe Torque Off 600V only: SIL2 ratingCarrier Frequency: 4-32 kHz (8 kHz default)Operating Temperature: –10° to 50°CDynamic Braking: Built-in brake chopper in frames 2 & 3External Braking Resistor Up to 150% dynamic braking with properly sized resistorDC Injection Braking: IncludedVolts/Hz Linear V/Hz, user defined, energy optimizer & boost functionFrequency Control Range: 0-500 HzAccel/Decel: Independently adjustable accel. & decel. RampsTime Range: 0.0 to 600.0 SecondsKeypad Speed Control YesSink/Source Inputs Source, 24 VDC LogicElectronic Overload Trip Electronic motor overload inverse 150% for 1 minute or 175% for 2 secondsCommunications Built-in MODBUS-RTU (RS-485) CommunicationsPI Control Built-in

Protective Features Under Voltage Level Depends on Voltage Class (120, 240, 480, or 600)Output Short Circuit Phase-to-Phase on Drive OutputOver Temperature Heatsink MonitorDC Bus Overvoltage DC Bus Level TripDrive Overload Exceed drive rating of 150% for one minute or 175% for 2 secondsOver Current Over-current/short-Circuit protectionOutput Phase Trips on open Output PhaseGround Fault Trips on phase to ground short circuitLoss of Reference Trips on Loss of Speed Command SignalCommunication Error Detects a communication error (fault)

Agency Certifications UL, cUL, CE, C-tick, GOST-RService Conditions Altitude: 1,000 m (3,300 ft.). Derate by 1% every 100 m (328 ft.) up to 2,000m (6,600 ft.)

Ambient Temperature: –10° (14°F) to 50°C (122°F)Relative Humidity: 0% to 95%, non-condensingIntermittent Overload: 150% overload capacity for up to 1 minute, 175% overload capacity for up to 2 seconds



Motors

Unit HandlingM

otorsBrake M

otorsIEC Fram

eM

otors50 HertzM


Motors & Controls

DC Motors

and ControlsGearm


Motor

Accessories

225


Catalog Number Hp kW OutputAmps

Braking Chopper

FrameSize

ListPrice

MultiplierSymbol

Input voltage = 110 - 120V, 1-phase / Output = 230V, 3-phaseACS255-01U-02A3-1 0.5 0.37 2.3 - E1 408 EP

ACS255-01U-04A3-1 1.0 0.75 4.3 - E1 450 EP

ACS255-01U-05A8-1 1.5 1.1 5.8 ✓ E2 552 EP

Input voltage = 500 - 600V, 3-phase / Output = 575V, 3-phaseACS255-03U-02A1-6 1.0 0.75 2.1 ✓ P2 602 EP

ACS255-03U-03A1-6 2.0 1.5 3.1 ✓ P2 782 EP

ACS255-03U-04A1-6 3.0 2.2 4.1 ✓ P2 869 EP

ACS255-03U-06A5-6 5.0 4.0 6.5 ✓ P2 1,043 EP

ACS255-03U-09A0-6 7.5 5.5 9.0 ✓ P2 1,459 EP

ACS255-03U-12A0-6 10 7.5 12.0 ✓ P3 1,751 EP

ACS255-03U-17A0-6 15 11 17.0 ✓ P3 2,291 EP

ACS255-03U-22A0-6 20 15 22.0 ✓ P3 2,917 EP

ACS255 IP20 – Ratings & Pricing

Variant DescriptionFieldKit

Voltage Rating MultiplierSymbol120 V 600 V

RCCS-01Copying Tool

Copy stick, which is used to upload and download the parameters through RJ45 connection. Parameters can only be copied between drives of the same product range and power rating (size).

RCCS-01 234 234 ES

RCRO-01 Relay Output Card

The second relay output module can be used in applications where the analog output from the drive is converted to a relay output. Max relay switching voltage: 250 VAC/220 VDC.Max relay switching current: 1A Max input voltage: +/- 50 VDC Environmental: -10ºC … +50ºC Conformity: IP00, UL94V-0.

RCRO-01 140 NA ES

RCRP-02External LED

Remote keypad that can be added through RJ45 connection.Signal interface: standard 6-way RJ45 connector Supply input: 10V … 36 VDC, 30mARS485 signal: industry standard 2-wire +5V differential Environmental: operational 0 … 50 °CStorage: -40°C … 60°CRelative humidity: < 95% (non condensing) Protection rating: IP54Max cable length: 20m (unscreened, total length) 100m (screened, twisted pair, total length).

RCRP-02 106 106 ES

RCRJ-01RJ45 Y-Cable Splitter

The data cable splitter is a 3-way “Y” cable splitter suitable for a RS-485 network of drives. The option is compatible with standard CAT 5 or CAT 6 type cable and can be used for Modbus-RTU or an RS-485 remote keypad network.

RCRJ-01 59 59 ES

RCNT-01RJ45 Y-Cable Splitter w/Term

The data cable splitter with terminal block is a 3-way “Y” cable splitter with one terminal block suitable for an RS-485 network of drives. Two of the three connections are compatible with standard CAT 5 or CAT 6 type cable and the third is a terminal block that can be used to connect a PLC or network terminating resistor.

RCNT-01 183 183 ES

ACS255 IP20 Option KitsACS255 IP20 options (these options will be shipped separately from drive shipping package)

NOTES: (1) Refer to User Manual 3AUA0000137830 (115V drives) or 3AUA0000138354 (600V drives) for complete technical information(2) See following page for weights and dimensions


Grin

ders

Defin

ite P

urpo

seM

otor

sUn

it Ha

ndlin

gM

otor

sBr

ake

Mot

ors

IEC

Fram

eM

otor

s50

Her

tzM

otor

sIn

verte

r/Vec

tor

Mot

ors

& Co

ntro

lsDC

Mot

ors

and

Cont

rols

Gear

mot

ors

and

Gear

Pro

duct

sM

otor

Acce

ssor

ies


226

DriveFrame Size

A B C D E F G H I J Weight

mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in kg lb

1 173 6.81 160 6.30 109 4.29 162 6.38 5 0.20 123 4.84 82 3.23 50 1.97 5.5 0.22 10 0.39 1.0 2.20

2 221 8.70 207 8.15 137 5.39 209 8.23 5.3 0.21 150 5.91 109 4.29 63 2.48 5.5 0.22 10 0.39 1.7 3.75

NOTEMaximum Control Terminal Torque Settings of 0.5 Nm (4.5 lb-in)Maximum Power Terminal Torque Settings of 1 Nm (9 lb-in)

DriveSize

A B C D E F G H I J Weight

mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in Kg lb

2 221 8.70 207 8.15 137 5.39 209 8.23 5.3 0.21 185 7.28 112 4.41 63 2.48 5.5 0.22 10 0.39 1.8 4

3 261 10.28 246 9.69 - - 247 9.72 6 0.24 205 8.07 131 5.16 80 3.15 5.5 0.22 10 0.39 3.5 7.7

4.2. Mechanical Dimensions and Mounting – IP20 Open Units

4.2. Mechanical Dimensions and Weights – IP20 Open Units

600V IP20 Units



Motors

Unit HandlingM

otorsBrake M

otorsIEC Fram

eM

otors50 HertzM


Motors & Controls

DC Motors

and ControlsGearm


Motor

Accessories

227


ACS255 IP66AC Micro Drive

Applications: Harsh environment applications with 115V (for 230V motors), 230V, 460V & 600V supply power: conveyors, mixers, pumps, fans, food and beverage variable torque, constant torque or constant horsepower applications. Compact size replaces motor starters/soft starters. New installation, replacement and original equipment manufacturer (OEM). Features: V/Hz control for linear (CT) or squared (VT) applications or Sensorless Vector Control. Overload capacity of 150% for 60 seconds or 175% for two seconds. Built in PI control. IP20 enclosure with wall or DIN rail mounting. Remote mount keypad option kit. Integrated keypad with operator interface and local speed control. Optional operator controls - On/Off, Fwd-Off-Rev, and Speed Pot. Easy setup and commissioning with ABB common programming structure. Quick start macros for fast commissioning and start-up Built-in braking chopper allows connection to remote braking resistor for enhanced performance needs. Built-in Modbus RTU and Y-cable splitter kit allows fast system integration. Optional drive parameter copying tool.

Performance Features Control Modes 115-460 VAC: V/Hz and open loop vector600 VAC: V/Hz and open loop vector

Operator Interface Module Integral Drive MountedKeypad Display 6-character LED displayProgrammable Preset Speeds FourAnalog Outputs: one One (0-10 VCD)Auto Restart Yes – Up to 5 attemptsFrequency Avoidance One bandFault History Last four faults

Drive Specifications Analog Inputs: two 0-10 VDC, 4 - 20mARelay Outputs: one Built-in form C relay, 250 VAC, 6A / 30 VDC, 5AAnalog Output / Digital Output 0-10 VDC: one analog usable for meter (freq., current, voltage) or digital outputOverload Capacity Drive Output 150% for 1 minute and 175% for 2 secondsMaximum Load 5 Hp @ 230 VAC, 10 Hp @ 460 VAC, 15 Hp @ 600 VACInput Voltage Ranges: 115 VAC (99-126); 230 VAC (198-264); 460 VAC (342-528); 600 VAC (450-660)Rated Input Frequency 50-60 Hz (±5%)Carrier Frequency: 4-32 kHz (8 kHz default)Operating Temperature: –10° to 40°CDynamic Braking: Built-in brake chopper in frames 2 & 3External Braking Resistor Up to 150% dynamic braking with properly sized resistorDC Injection Braking: IncludedVolts/Hz Linear V/Hz, user defined, energy optimizer & boost functionFrequency Control Range: 0-500 HzAccel/Decel: Independently adjustable accel. & decel. RampsTime Range: 0.0 to 600.0 SecondsKeypad Speed Control YesSink/Source Inputs Source, 24 VDC LogicElectronic Overload Trip Electronic motor overload inverse 150% for 1 minute or 175% for 2 secondsCommunications Built-in MODBUS-RTU (RS-485) CommunicationsPI Control Built-in

Protective Features Under Voltage Level Depends on Voltage Class (120, 240, 480, or 600)Output Short Circuit Phase-to-Phase on Drive OutputOver Temperature Heatsink MonitorDC Bus Overvoltage DC Bus Level TripDrive Overload Exceed drive rating of 150% for one minute or 175% for 2 secondsOver Current Over-current/short-Circuit protectionOutput Phase Trips on open Output PhaseLoss of Reference Trips on Loss of Speed Command SignalCommunication Error Detects a communication error (fault)

Agency Certifications UL, cUL, CE, C-tick, GOST-R Service Conditions Altitude: 1,000 m (3,300 ft.). Derate by 1% every 100 m (328 ft.) up to 2,000m (6,600 ft.)

Ambient Temperature: –10° (14°F) to 40°C (102°F)Relative Humidity: 0% to 95%, non-condensingIntermittent Overload: 150% overload capacity for up to 1 minute, 175% overload capacity for up to 2 seconds

1/2 thru 1.5 Hp IP66 - NEMA 4X 115 Vac 1 Phase - 50/60 Hz1/2 thru 5 Hp IP66 - NEMA 4X 230 Vac 1 Phase - 50/60 Hz1/2 thru 5 Hp IP66 - NEMA 4X 230 Vac 3 Phase - 50/60 Hz1 thru 10 Hp IP66 - NEMA 4X 460 Vac 3 Phase - 50/60 Hz1 thru 15 Hp IP66 - NEMA 4X 600 Vac 3 Phase - 50/60 Hz


Grin

ders

Defin

ite P

urpo

seM

otor

sUn

it Ha

ndlin

gM

otor

sBr

ake

Mot

ors

IEC

Fram

eM

otor

s50

Her

tzM

otor

sIn

verte

r/Vec

tor

Mot

ors

& Co

ntro

lsDC

Mot

ors

and

Cont

rols

Gear

mot

ors

and

Gear

Pro

duct

sM

otor

Acce

ssor

ies


228

Catalog Number Hp kW BrakingChopper

OutputCurrent

Weight(lbs)

FrameSize

List Price

OptionalSwitch(+F278)

MultiplierSymbol

Input voltage = 110 - 120V, 1-Phase / Output = 230V, 3-phaseACS255-01U-02A3-1+B063 0.5 0.37 - 2.3 6.5 E1 757 936 EP

ACS255-01U-04A3-1+B063 1 0.75 - 4.3 6.5 E1 836 1,010 EP

ACS255-01U-05A8-1+B063 1.5 1.1 ✓ 5.8 9.3 E2 1,018 1,151 EP

Input voltage = 200 - 240V, 1-Phase / Output = 230V, 3-phaseACS255-01U-02A3-2+B063 0.5 0.37 - 2.3 6.5 E1 723 832 EP

ACS255-01U-04A3-2+B063 1 0.75 - 4.3 6.5 E1 795 893 EP

ACS255-01U-06A1-2+B063 1.5 1.1 6.1 6.5 E1 826 958 EP

ACS255-01U-07A0-2+B063 2 1.5 -- 7.0 6.5 E1 853 1,004 EP

ACS255-01U-10A5-2+B063 3 2.2 ✓ 10.5 9.3 E2 982 1,122 EP

ACS255-01U-15A3-2+B063 5 4.0 ✓ 15.3 17 E3 1513 1658 EP

Input voltage = 200 - 240V, 3-phase / Output = 230V, 3-phaseACS255-03U-02A3-2+B063 0.5 0.37 - 2.3 6.5 E1 660 780 EP

ACS255-03U-04A3-2+B063 1 0.75 - 4.3 6.5 E1 717 813 EP

ACS255-03U-06A1-2+B063 1.5 1.1 - 6.1 6.5 E1 777 889 EP

ACS255-03U-07A0-2+B063 2 1.5 ✓ 7.0 9.3 E2 824 974 EP

ACS255-03U-10A5-2+B063 3 2.2 ✓ 10.5 9.3 E2 950 1,122 EP

ACS255-03U-18A0-2+B063 5 4.0 ✓ 18.0 17.0 E3 1,353 1,500 EP

Input voltage = 380 - 480V, 3-phase / Output = 460V, 3 phase ACS255-03U-01A2-4+B063 0.5 0.37 - 1.2 6.5 E1 736 856 EP

ACS255-03U-02A2-4+B063 1 0.75 - 2.2 6.5 E1 777 896 EP

ACS255-03U-03A3-4+B063 1.5 1.1 - 3.3 6.5 E1 843 966 EP

ACS255-03U-04A1-4+B063 2 1.5 - 4.1 6.5 E1 911 1,040 EP

ACS255-03U-05A8-4+B063 3 2.2 ✓ 5.8 9.3 E2 1,027 1,175 EP

ACS255-03U-09A5-4+B063 5 4.0 ✓ 9.5 9.3 E2 1,275 1,411 EP

ACS255-03U-14A0-4+B063 7.5 5.5 ✓ 14.0 17.0 E3 1,646 1,765 EP

ACS255-03U-18A0-4+B063 10 7.5 ✓ 18.0 17.0 E3 1,952 2,118 EP

Input voltage = 500 - 600V, 3-phase / Output = 575V, 3-phase ACS255-03U-02A1-6+B063 1 0.75 ✓ 2.1 10.6 P2 1,285 1,462 EP

ACS255-03U-03A1-6+B063 2 1.5 ✓ 3.1 10.6 P2 1,484 1,649 EP

ACS255-03U-04A1-6+B063 3 2.2 ✓ 4.1 10.6 P2 1,697 1,849 EP

ACS255-03U-06A5-6+B063 5 4.0 ✓ 6.5 10.6 P2 1,946 2,082 EP

ACS255-03U-09A0-6+B063 7.5 5.5 ✓ 9.0 10.6 P2 2,455 2,559 EP

ACS255-03U-12A0-6+B063 10 7.5 ✓ 12.0 16.1 P3 2,925 3,096 EP

ACS255-03U-17A0-6+B063 15 11 ✓ 17.0 16.1 P3 4,297 4,424 EP

ACS255 IP66 – Ratings & Pricing



Motors

Unit HandlingM

otorsBrake M

otorsIEC Fram

eM

otors50 HertzM


Motors & Controls

DC Motors

and ControlsGearm


Motor

Accessories

229


Variant DescriptionFieldKit

Voltage Rating MultiplierSymbol120 V 600 V

RCCS-01Copying Tool

Copy stick, which is used to upload and download the parameters through RJ45 connection. Parameters can only be copied between drives of the same product range and power rating (size).

RCCS-01 234 234 ES

RCRO-01Relay Output Card

The second relay output module can be used in applications where the analog output from the drive is converted to a relay output.Max relay switching voltage: 250 VAC/220 VDC Max relay switching current: 1AMax input voltage: +/- 50 VDC Environmental: -10ºC … +50ºC Conformity: IP00, UL94V-0

RCRO-01 140 N/A ES

RCRP-02External LED

Remote panel that can be added through RJ45 connection.Signal interface: standard 6-way RJ45 connector Supply input: 10V … 36 VDC, 30mARS485 signal: industry standard 2-wire +5V differential Environmental: operational 0 … 50°CStorage: -40°C … 60°CRelative humidity: < 95% (non condensing) Protection rating: IP54Max cable length: 20m (unscreened, total length) 100m (screened, twisted pair, total length).

RCRP-02 106 106 ES

RCRJ-01RJ45 Y-Cable Splitter

The data cable splitter is a 3-way “Y” cable splitter suitable for a RS-485 network of drives. The option is compatible with standard CAT 5 or CAT 6 type cable and can be used for Modbus-RTU or an RS-485 remote keypad network.

RCRJ-01 59 59 ES

RCNT-01RJ45 Y-Cable Splitter w/Term

The data cable splitter with terminal block is a 3-way “Y” cable splitter with one terminal block suitable for an RS-485 network of drives. Two of the three connections are compatible with standard CAT 5 or CAT 6 type cable and the third is a terminal block that can be used to connect a PLC or network terminating resistor.

RCNT-01 183 183 ES

ACS255 IP66 Option KitsACS255 IP66 options (these options will be shipped separately from drive shipping package)

DriveFrame Size

A B D E F G H I J Weight

mm in mm in mm in mm in mm in mm in mm in mm in mm in Kg lb

1 232 9.13 207 8.15 189 7.44 25 0.98 179 7.05 161 6.34 148.5 5.85 4 0.16 8 0.31 2.95 6.5

2 257 10.12 220 8.67 200 7.87 28.5 1.12 186.5 7.34 188 7.4 176 6.93 4.2 0.17 8.5 0.33 4.2 9.26

3 310 12.2 276.5 10.89 251.5 9.9 33.4 1.31 228.7 9 210.5 8.29 197.5 7.78 4.2 0.17 8.5 0.33 7.7 17

NOTEThe size 3 product has 4 symmetrical mounting pointsMaximum Control Terminal Torque Settings of 0.5 Nm (4.5 lb-in)Maximum Power Terminal Torque Settings of 1 Nm (9 lb-in)

4.4. Mechanical Dimensions – IP66 (NEMA 4X) Enclosed Units


Grin

ders

Defin

ite P

urpo

seM

otor

sUn

it Ha

ndlin

gM

otor

sBr

ake

Mot

ors

IEC

Fram

eM

otor

s50

Her

tzM

otor

sIn

verte

r/Vec

tor

Mot

ors

& Co

ntro

lsDC

Mot

ors

and

Cont

rols

Gear

mot

ors

and

Gear

Pro

duct

sM

otor

Acce

ssor

ies


230

ACS355 AC Micro Drive


Applications: Variable torque, constant torque or constant horsepower applications. Newinstallation, replacement and original equipment manufacturer (OEM). Features: Volts per Hertz, Open Loop Vector Control with peak overload capacity of 150% and PID capability. Flexible mounting options with IP20 enclosure as standard and NEMA 1 option kit. Ships with blank control panel; advanced or basic control panel option available for operator interface and local speed control. Programming by Groups makes it easy to navigate and find parameters. A Quick Start Assistant enables users to program and start using the drive in minutes without need for a User Manual. Built-in braking transistor allows connection to remote braking resistor for enhanced performance needs.

Performance Features Control Modes Scalar (V/Hz) or Open Loop Vector

Motor Control Induction, Permanent Magnet

Operator Interface Module Basic or advanced panels available, shipped with blank cover

Control Panel Display LCD Graphical Display

Programmable Preset Speeds Seven

Analog Outputs One (0/4 - 20mADC)

Auto Restart Yes – Up to 5 attempts

Frequency Avoidance Three Bands

Fault History Last Three Faults

Digital Inputs Five Configurable Inputs

Drive Specifications Analog Inputs: Two Total 0-10 VDC, -10 to 10 VDC or 0/4 - 20mADC

Digital Outputs: Two TotalOne Transistor Output

Form C Relay, NO + NC, 250 VAC / 30 VDC

Analog Outputs 0/4 - 20mADC

Safe Torque Off STO SIL 3

Overload Capacity Drive Output 150% for 1 min., 180% for 2 sec. at start

Speed Control Accuracy Static: 20% of motor nominal slip

Input Voltage Ranges: 200 - 240 VAC; 380 - 480 VAC

Input Voltage Tolerance 10% / -10%

Rated Input Frequency 50-60 Hz (±5%)

Carrier Frequency: 4-16 kHz (4 kHz default)

Operating Temperature: –10° to 40°C; –10° to 50°C w/ 10% derate

Dynamic Braking Built-in Brake Chopper

Flux Braking: Standard

DC Injection Braking: Standard

Flux Optimization: Can improve efficiency up to 10% on light loads

Volts/Hz

Linear V/Hz (CT)

Squared V/Hz (VT)

Custom 4-Point V/Hz Curve

Open Loop Vector: Full Open Loop Vector Control with Autotune Function and Motor Model Calculation

Frequency Control Range: 0-599 Hz

Accel/Decel: Two independently adjustable sets of ramps

Time Range: 0.0 to 1800 Seconds

S Curve Accel. & Decel. Yes, with adjustable rounding time

Control Panel Speed Control Yes

Sink/Source Inputs Selectable, 24 VDC Logic

Electronic Overload Trip Electronic Motor Overload Inverse Time calculation

Communications Built-in MODBUS-RTU (RS-485) Communications

PID Control Two independently controllable

Control Panel Not Included



Motors

Unit HandlingM

otorsBrake M

otorsIEC Fram

eM

otors50 HertzM


Motors & Controls

DC Motors

and ControlsGearm


Motor

Accessories

231


Protective Features Under Voltage Level Depends on Voltage Class (240, 480)

Ground Fault Protection Ground Fault protection active during run

Output Short Circuit Phase-to-Phase on Drive Output

Over Temperature Heatsink Monitor

Motor Overtemp Excessive estimated Motor Temperature, Pt100, or PTC

DC Bus Overvoltage DC Bus Level Trip

IGBT Overtemp Drive Output IGBT Temp is too high

Over Current Over-current/short-Circuit protection

Output Phase Loss Trips on Motor Phase Loss

Loss of Reference Trips on Loss of Speed Command Signal

Comm. Error Detects a communication error (fault)

Loss of Control Panel Drive will trip if under Control Panel control and Control Panel communication is lost

Incorrect Wiring Drive faults on output wiring fault when input power is connected to Motor terminals

Motor Model Calc Fail Drive will trip if Motor Model cannot be determined - Open Loop Vector Control

Agency Certifications UL, cUL, CE, C-tick, RoHS, TUV, NORD

Service Conditions Altitude: 1,000 m (3,300 ft.). Derate by 1% every 100 m (328 ft.) up to 2,000m (6,600 ft.)

Ambient Temperature: -10°C (14°F) to 40°C (104°F) - up to 50°C with 10% derate

Relative Humidity: 0% to 95%, non-condensing

Intermittent Overload: 150% overload capacity for up to 1 minute

ACS355 AC Micro Drive continued


Grin

ders

Defin

ite P

urpo

seM

otor

sUn

it Ha

ndlin

gM

otor

sBr

ake

Mot

ors

IEC

Fram

eM

otor

s50

Her

tzM

otor

sIn

verte

r/Vec

tor

Mot

ors

& Co

ntro

lsDC

Mot

ors

and

Cont

rols

Gear

mot

ors

and

Gear

Pro

duct

sM

otor

Acce

ssor

ies


232

ACS355 - 460V, 50/60Hz, 3-Phase IP20

Catalog Number Hp kW Output 2Amps

BrakingChopper Frame

IP20 with Blank PanelList Price

Mult. Sym

ACS355-03U-01A2-4 0.5 0.37 1.2 ✓ R0 380 ER

ACS355-03U-01A9-4 0.75 0.55 1.9 ✓ R0 419 ER

ACS355-03U-02A4-4 1 0.75 2.4 ✓ R1 458 ER

ACS355-03U-03A3-4 1.5 1.1 3.3 ✓ R1 494 ER

ACS355-03U-04A1-4 2 1.5 4.1 ✓ R1 529 ER

ACS355-03U-05A6-4 3 2.2 5.6 ✓ R1 641 ER

ACS355-03U-08A8-4 5 4 8.8 ✓ R1 761 ER

ACS355-03U-12A5-4 7.5 5.5 12.5 ✓ R3 935 ER

ACS355-03U-15A6-4 10 7.5 15.6 ✓ R3 1,154 ER

ACS355-03U-23A1-4 15 11 23.1 ✓ R3 1,475 ER

ACS355-03U-31A0-4 20 15 31 ✓ R4 1,800 ER

ACS355-03U-38A0-4 25 18.5 38 ✓ R4 2,142 ER

ACS355-03U-44A0-4 30 22 44 ✓ R4 2,602 ER

NOTES: (1) This drive is a 3-phase 230V supply UL listed for 1-phase 230V supply.(2) Amperage rating is at 40C, continuous. 50C ratings are available in technical literature.

ACS355 - Ratings & PricingACS355 - 230V, 50/60Hz, 1-Phase IP20




Mult. Sym

ACS355-01U-02A4-2 0.5 0.37 2.4 ✓ R0 319 ER

ACS355-01U-04A7-2 1 0.75 4.7 ✓ R1 362 ER

ACS355-01U-06A7-2 1.5 1.1 6.7 ✓ R1 405 ER

ACS355-01U-07A5-2 2 1.5 7.5 ✓ R2 448 ER

ACS355-01U-09A8-2 3 2.2 9.8 ✓ R2 540 ER

ACS355-03U-46A8-2 1 3 2.2 12.6 ✓ R4 1523 ER

ACS355 - 230V, 50/60Hz, 3-Phase IP20




Mult. Sym

ACS355-03U-02A4-2 0.5 0.37 2.4 ✓ R0 319 ER

ACS355-03U-03A5-2 0.75 0.55 3.5 ✓ R0 341 ER

ACS355-03U-04A7-2 1 0.75 4.7 ✓ R1 362 ER

ACS355-03U-06A7-2 1.5 1.1 6.7 ✓ R1 405 ER

ACS355-03U-07A5-2 2 1.5 7.5 ✓ R1 448 ER

ACS355-03U-09A8-2 3 2.2 9.8 ✓ R2 540 ER

ACS355-03U-17A6-2 5 4 17.6 ✓ R2 669 ER

ACS355-03U-24A4-2 7.5 5.5 24.4 ✓ R3 873 ER

ACS355-03U-31A0-2 10 7.5 31.0 ✓ R4 1,152 ER

ACS355-03U-46A2-2 15 11 46.2 ✓ R4 1,523 ER



Motors

Unit HandlingM

otorsBrake M

otorsIEC Fram

eM

otors50 HertzM


Motors & Controls

DC Motors

and ControlsGearm


Motor

Accessories

233



ACS-CP-A Advanced Control Panel The Advanced Control Panel includes a full graphic, backlit display capable of displaying three Actual Signal values or bar graphs. The alphanumeric display supports 13 languages. A real-time clock is also included. This panel supports the internal Sequence Programming Function.

150 ES

ACS-CP-C Basic Control Panel The Basic Control Panel includes a single line numeric backlit LCD display. 75 ES

OPMP-01 Cabinet Panel Mounting Control Panel Mounting Platform allows remote mounting of the keypad on a large enclosure or remote panel. The kit maintains UL Type 12 integrity of the mounting location. Adapters, 3 m (10ft) cable and mounting hardware are included in this kit. With this mounting arrangement, the keypad is removable from the panel in a fashion identical to a drive-mounted keypad.

138 ES

ACS/H-CP-EXT Control Panel Mounting Control Panel Mounting Kit for ACS355 drives allows remote mounting of the keypad on the door of an enclosure. The kit includes a 10 ft (3 m) CAT 5 patch cable, gasket for NEMA 12, mounting hardware and drilling template.

55 ES

ACS/H-CP-EXT-IP66 NEMA 4X Cabinet Panel Mounting Allows remote mounting of the ACS-CP-A and ACS-CP-B Operator Panels on a larger NEMA 4X (IP66) enclosure or remote panel. The kit maintains NEMA 4X integrity of the mounting location. All hardware and a mounting template are provided, in addition to a 3 m panel cable. The operator is not removable from the front of the enclosure when mounted. The operator panel must be purchased separately.

63 ES

OCAT-01 Panel Extension Cable 7 ft CAT 5 patch cable allows remote operation of the standard panel or connection of the drive to a Personal Computer using the RJ45/DB9 Adapter which must be purchased separately.

40 ES

MTAC-01 Pulse Encoder Interface The Pulse Encoder Interface module offers a differential or single ended interface for a digital pulse encoder connection. The module is capable of operating from either an external 15 or 24 VDC signal with a maximum frequency of 200kHz.

125 ES

MPOW-01 The optional auxiliary power module provides auxiliary voltage to the control panel, fieldbus, and I/O.

125 ES

FEPA-01 Fieldbus Adapter Power Module The optional Auxiliary Power Module allows connecting external 24VDC power source to the FPBA-01 or FCAN-01 fieldbus adapter.

120 ES

MREL-01 Relay Output Extension Module The Relay Output Extension module (MREL) is an interface for connecting three (3) FORM C relay outputs. The MREL-01 is supported from SW version 2.57C and onwards for the ACS355 and is supported by all SW version of ACS310 & ACS355.

105 ES

MPOT-01 Speed Pot, Start/Stop & FW/Rev Switches

Potentiometer with two switches: Start/Stop and Forward/Reverse. Polarity is selected with DIP switches. No external power source is needed for the potentiometer.

30 ES

FCAN-01 Kit CANopen Adapter CANopen is a higher layer protocol based on the CAN (Control Area Network) serial bus system and the CAL (CAN Application Layer). CANopen assumes that the hardware of the connected device has a CAN transceiver and a CAN controller as specified in ISO 11898. The CANopen Communication Profile, CiA Ds301, includes both cyclic and event driven communication, which makes it possible to reduce the bus load to minimum while still maintaining extremely short reaction times. High communication performance can be achieved at relatively low baud rates, thus reducing EMC problems and cable costs. CANopen device profiles define both direct access to drive parameter and time critical process data communication. The FCAN-01 module fulfills CiA (CAN in Automation) standard DSP 402 (Drives and Motion Control).

325 ES

FDNA-01 Kit DeviceNet Adapter The DeviceNet network uses a linear bus topology. Terminating resistors are required on each end of the trunk line. Drop lines as long as 6 m (20 ft) each are permitted, allowing for attachment of one or more nodes. DeviceNet allows branching structures only on drop lines.

260 ES

FENA-01 Kit Ethernet IP/Modbus TCP Adapter The FENA-01 module supports both Modbus®-TCP and EtherNet/IP™ network protocols. The Modbus-TCP protocol is simply the Modbus protocol used on top of Ethernet-TCP/IP. Modbus-TCP is an open Industrial Ethernet network which has been specified by the Modbus-IDA User Organization. EtherNet/ IP is based on the Common Industrial Protocol (CIP), which is also the framework for both the ControlNet and DeviceNet network protocols. The FENA-01 supports 10/100 Mbps transfer rate with network connections made with CAT 5 wiring and RJ-45 connectors. Both star and bus topology options are supported.

400 ES

ACS355 Option Kits


Grin

ders

Defin

ite P

urpo

seM

otor

sUn

it Ha

ndlin

gM

otor

sBr

ake

Mot

ors

IEC

Fram

eM

otor

s50

Her

tzM

otor

sIn

verte

r/Vec

tor

Mot

ors

& Co

ntro

lsDC

Mot

ors

and

Cont

rols

Gear

mot

ors

and

Gear

Pro

duct

sM

otor

Acce

ssor

ies


234

ACS355 Option Kits Continued


FECA-01 Kit EtherCAT Adapter The FECA-01 module supports EtherCAT® network protocol. EtherCAT® is a Real Time Ethernet technology which aims to maximize the use of the full duplex Ethernet bandwidth. It overcomes the overhead normally associated with Ethernet by employing “on the fly” processing hardware. An EtherCAT® bus consists of a master system and up to 65535 slave devices, connected together with standard Ethernet cabling. The FECA-01 supports 10/100 Mbps transfer rate with network connections made with CAT 5 wiring and RJ-45 connectors. Designed for daisy chain configuration on an EtherCAT® network.

400 ES

FPBA-01 Kit PROFIBUS-DP Adapter PROFIBUS is an open serial communication standard that enables data exchange between all kinds of automation components. The physical transmission medium of the bus is a twisted pair cable (according to the RS-485 standard). The maximum length of the bus cable is 100 to 1200 m, depending on the selected transmission rate. Up to 31 stations can be connected to the same PROFIBUS system without the use of repeaters.

290 ES

FRSA-00 Modbus RTU PCB Similar to the FMBA-01-KIT except as a bare, coated printed circuit board (PCB) with the RS-485 GND as the same potential as the drive I/O GND.

65 ES

FMBA-01 Kit Modbus RTU Adapter Modbus is a serial, asynchronous protocol. The Modbus protocol does not specify the physical interface. Typical physical interfaces are RS-232 and RS-485. The FMBA-01 provides a galvanically isolated RS-485 interface. Modbus is designed for integration with Modicon PLCs or other automation devices, and the services closely correspond to the PLC architecture. The FMBA-01 supports the RTU protocol only..

142 ES

SREA-01-KIT Ethernet Adapter (Gateway) SREA-01 is an optional device for web browser based remote interface to the ACS310 and ACS355 drives via Ethernet. This DIN rail mounted adapter enables remote data acquisition through a standard web browser, utilizing an internal web server for drive configuration and access. Multiple drives (up to 10) can be connected to the Modbus-RTU or Modbus-TCP.

1,250 ES

MFDT-01 Flashdrop FlashDrop is a powerful palm sized tool for fast and easy parameter selecting and setting. It gives the possibility to hide selected parameters to protect the machine. Only the parameters needed in the application are shown. The tool can upload/download parameters, copy parameters between two drives or between a PC and a drive. Includes DrivePM (Drive Parameter Manager) which is a software tool to create, edit and copy parameter sets for FlashDrop. The parameter sets can consist of all parameters or only a set of the user parameters.

600 ES

SEDG-01 Ethernet to DeviceNet Gateway SEDG-01 (EtherNet/IP to DeviceNet) -- will allow a DriveBrowser user to connect a PC’s Ethernet port to drives on a DeviceNet networks.

3,995 ES

SECG-01 EtherNet to ControlNet Gateway SECG-01 (EtherNet/IP to ControlNet) -- will allow a DriveBrowser user to connect a PC’s Ethernet port to drives on a ControlNet networks.

3,995 ES

3AFE64532871 DriveWindow Light DriveWindow Light is software designed for online drive commissioning and maintenance, making it possible to adjust parameters, read the actual values and control the drive with DriveWindow Light instead of the drive control panel. It is also possible to follow trends and draw graphs. An RJ45 to DB9 adapter cable (OPCA-01) is provided to permit connection between the panel port and a PC.

275 ES

3AUA0000041141 DriveBrowser DriveBrowser software is designed for online drive commissioning and maintenance, using a computer’s standard Ethernet port to connect to an EtherNet/IP or Modbus-TCP network. It is compatible with the ACS350, ACS355, ACS550, ACH550, DCS800 and ACS800* drives (*ACS800 standard control program). Drives require configuration and connection to an EtherNet/IP or Modbus-TCP network.DriveBrowser supports Microsoft Windows operating systems (Windows NT4, 2000, XP & Vista).• Configure network connections• Parameter editing and monitoring• Upload/download drive parameter files, save, print• Compare files• Trending up to four signals• Drive Control for commissioning and test

385 ES

OPCA-01 RJ45/DB9 Adapter This adapter converts the drive’s panel port RJ45 (CAT 5 cable connector) plug to a 9 pin RS-232 computer serial port connector for connecting the drive to a PC.

50 ES



Motors

Unit HandlingM

otorsBrake M

otorsIEC Fram

eM

otors50 HertzM


Motors & Controls

DC Motors

and ControlsGearm


Motor

Accessories

235


Frame Size

IP20 (cabinet) / UL Open NEMA 1 / UL Type 1

H1(in)

H2(in)

H3(in)

W(in)

D(in)

Wt.(lb)

H4(in)

H5(in)

W(in)

D(in)

Wt.(lb)

RO 6.65 7.95 9.41 2.76 6.34 2.6 10.12 11.02 2.76 6.65 3.5

R1 6.65 7.95 9.41 2.76 6.34 2.6 10.12 11.02 2.76 6.65 3.5

R2 6.65 7.95 9.41 4.13 6.50 3.3 10.12 11.10 4.13 6.65 4.2

R3 6.65 7.95 9.29 6.65 6.65 5.5 10.24 11.77 6.65 6.97 6.8

R4 7.13 7.95 9.61 10.24 6.65 9.7 10.63 12.60 10.24 6.97 11.0

1 UN = 200...240V, 1.3 kg / 2.9 lb, U = 380...780V: 1.2 kg / 2.9 lb 2 UN = 200...240V, 1.7 kg / 3.7 lb, U = 380...780V: 1.6 kg / 3.5 lb H1 = Height without fastenings and clamping plate H2 = Height with fastenings but without clamping plate

H3 = Height with fastenings and clamping plateH4 = Height with fastenings and NEMA 1 connection boxH5 = Height with fastenings, NEMA 1 connection box and Hood

ACS355 Dimensions

H3

H2

H1

H5H4

D

W

WD

ACS355 Option Kits Continued

NOTE: (1) Amperage rating is at 40C, continuous. 50C ratings are available in technical literature.


MUL1-R1MUL1-R3MUL1-R4

NEMA 1 Enclosure Kit This option provides the hardware to modify the ACS310,or ACS355 drive from the standard fingersafe protected chassis to NEMA 1 protection capable of landing conduit. MUL1-R1 kit is used with frame sizes R0 through R2, MUL1-R3 is used with frame size R3, and MUL1-R4 is used with frame size R4.

7575

100ES

ACS355-DEMOCASE ACS355 Demo Case Powered by 115VAC, the DemoCase includes an ACS355 drive mounted on a panel, as well as a motor and I/O board with switches, pots, meters and LEDs permitting remote operation of the drive and motor.

2,800 ES


Grin

ders

Defin

ite P

urpo

seM

otor

sUn

it Ha

ndlin

gM

otor

sBr

ake

Mot

ors

IEC

Fram

eM

otor

s50

Her

tzM

otor

sIn

verte

r/Vec

tor

Mot

ors

& Co

ntro

lsDC

Mot

ors

and

Cont

rols

Gear

mot

ors

and

Gear

Pro

duct

sM

otor

Acce

ssor

ies


236

ACS355 IP66, UL Type 4XAC Micro Drive


Applications: Variable torque, constant torque or constant horsepower applications. New installation, replacement and original equipment manufacturer (OEM). Features: Volts per Hertz, Open Loop Vector Control with peak overload capacity of 150% and PID capability. The drive is NSF certified and designed with materials meeting current hygiene standards, which means that the drive traps no bacteria and can withstand frequent high pressure washing. The control panel is housed within a plastic window is designed to resist moist and dusty environments. Programming by Groups makes it easy to navigate and find parameters. A Quick Start Assistant enables users to program and start using the drive in minutes without need for a User Manual. Built-in braking transistor allows connection to remote braking resistor for enhanced performance needs.

Performance Features Control Modes Scalar (V/Hz) or Open Loop VectorMotor Control Induction, Permanent Magnet Operator Interface Module Basic or advanced panels available, shipped with blank coverControl Panel Display LCD Graphical DisplayProgrammable Preset Speeds SevenAnalog Outputs One (0/4 - 20 mADC)Auto Restart Yes – Up to 5 attemptsFrequency Avoidance Three BandsFault History Last Three FaultsDigital Inputs Five Configurable Inputs

Drive Specifications Analog Inputs: Two Total 0-10 VDC, -10 to 10 VDC or 0/4 - 20mADC

Digital Outputs: Two TotalOne Transistor OutputForm C Relay, NO + NC, 250 VAC / 30 VDC

Analog Outputs 0/4 - 20maDCSafe Torque Off STO SIL 3Overload Capacity Drive Output 150% for 1 min., 180% for 2 sec. at startSpeed Control Accuracy Static: 20% of motor nominal slipInput Voltage Ranges: 200 - 240VAC; 380 - 480VACInput Voltage Tolerance 10% / -10%Rated Input Frequency 50-60 Hz (±5%)Carrier Frequency: 4-16 kHz (4 kHz default)Operating Temperature: –10° to 40°C; –10° to 50°C w/ 10% derateDynamic Braking Built-in Brake ChopperFlux Braking: StandardDC Injection Braking: StandardFlux Optimization: Can improve efficiency up to 10% on light loads

Volts/HzLinear V/HzSquare V/HzCustom 4-Point V/Hz Curve

Open Loop Vector: Full Open Loop Vector Control with Autotune Function and Motor Model CalculationFrequency Control Range: 0-500 HzAccel/Decel: Two independently adjustable sets of rampsTime Range: 0.0 to 1800 SecondsS Curve Accel. & Decel. Yes, with adjustable rounding timeControl Panel Speed Control YesSink/Source Inputs Selectable, 24 VDC LogicElectronic Overload Trip Electronic Motor Overload Inverse Time calculationCommunications Built-in MODBUS-RTU (RS-485) CommunicationsPID Control Two independently controllable



Motors

Unit HandlingM

otorsBrake M

otorsIEC Fram

eM

otors50 HertzM


Motors & Controls

DC Motors

and ControlsGearm


Motor

Accessories

237


Protective Features Under Voltage Level Depends on Voltage Class (240, 480)Ground Fault Protection Ground Fault protection active during runOutput Short Circuit Phase-to-Phase on Drive OutputOver Temperature Heatsink MonitorMotor Overtemp Excessive estimated Motor Temperature, Pt100, or PTCDC Bus Overvoltage DC Bus Level TripIGBT Overtemp Drive Output IGBT Temp is too highOver Current Over-current/short-Circuit protectionOutput Phase Trips on open Output PhaseLoss of Reference Trips on Loss of Speed Command SignalComm. Error Detects a communication error (fault)Loss of Control Panel Drive will trip if under Control Panel control and Control Panel communication is lostMotor Model Calc Fail Drive will trip if Motor Model cannot be determined - Open Loop Vector Control

Agency Certifications UL, cUL, CE, C-tick, RoHS, TUV, NORD

Service Conditions

Altitude: 1,000 m (3,300 ft.). Derate by 1% every 100 m (328 ft.) up to 2,000m (6,600 ft.)Ambient Temperature: -10°C (14°F) to 40°C (104°F)Relative Humidity: 0% to 95%, non-condensing

Intermittent Overload: 150% overload capacity for up to 1 minute180% overload capacity for up to 2 seconds

ACS355 IP66, UL Type 4X - Ratings & PricingACS355 - 230V, 50/60Hz, 1-Phase IP66, UL Type 4X



IP66 with Advanced

Panel List Price

IP66 with Advanced

Panel List Price w/ +F278”

Mult. Sym

ACS355-03U-06A7-2+B063 1 0.5 0.37 3.5 ✓ R1 953 1,259 ER

ACS355-03U-09A8-2+B063 1 1 0.75 4.9 ✓ R3 1,106 1,460 ER

ACS355-03U-17A6-2+B063 1 2 1.5 10.2 ✓ R3 1,460 1,927 ER

ACS355 - 230V, 50/60Hz, 3-Phase IP66, UL Type 4X



IP66 with Advanced

Panel List Price

IP66 with Advanced


Mult. Sym

ACS355-03U-02A4-2+B063 0.5 0.37 2.4 ✓ R1 750 990 ER

ACS355-03U-03A5-2+B063 0.75 0.55 3.5 ✓ R1 849 1,120 ER

ACS355-03U-04A7-2+B063 1 0.75 4.7 ✓ R1 904 1,193 ER

ACS355-03U-06A7-2+B063 1.5 1.1 6.7 ✓ R1 953 1,259 ER

ACS355-03U-07A5-2+B063 2 1.5 7.5 ✓ R1 1,017 1,342 ER

ACS355-03U-09A8-2+B063 3 2.2 9.8 ✓ R3 1,106 1,460 ER

ACS355-03U-17A6-2+B063 5 4.0 17.6 ✓ R3 1,460 1,927 ER

ACS355 - 460V, 50/60Hz, 3-Phase IP66, UL Type 4X



IP66 with Advanced

Panel List Price

IP66 with Advanced


Mult. Sym

ACS355-03U-01A2-4+B063 0.5 0.37 1.2 ✓ R1 718 898 ER

ACS355-03U-01A9-4+B063 0.75 0.55 1.9 ✓ R1 733 916 ER

ACS355-03U-02A4-4+B063 1 0.75 2.4 ✓ R1 786 982 ER

ACS355-03U-03A3-4+B063 1.5 1.1 3.3 ✓ R1 837 1,047 ER

ACS355-03U-04A1-4+B063 2 1.5 4.1 ✓ R1 900 1,125 ER

ACS355-03U-05A6-4+B063 3 2.2 5.6 ✓ R1 975 1,219 ER

ACS355-03U-08A8-4+B063 5 4 8.8 ✓ R1 1,180 1,475 ER

ACS355-03U-12A5-4+B063 7.5 5.5 12.5 ✓ R3 1,479 1,849 ER

ACS355-03U-15A6-4+B063 10 7.5 15.6 ✓ R3 1,802 2,253 ER

ACS355 IP66, UL Type 4X AC Micro Drive continued


Grin

ders

Defin

ite P

urpo

seM

otor

sUn

it Ha

ndlin

gM

otor

sBr

ake

Mot

ors

IEC

Fram

eM

otor

s50

Her

tzM

otor

sIn

verte

r/Vec

tor

Mot

ors

& Co

ntro

lsDC

Mot

ors

and

Cont

rols

Gear

mot

ors

and

Gear

Pro

duct

sM

otor

Acce

ssor

ies


238


ACS-CP-A Advanced Control Panel The Advanced Control Panel includes a full graphic, backlite display capable of displaying three Actual Signal values or bar graphs. The alphanumeric display supports 13 languages.A real-time clock is also included. This panel supports the internal Sequence Programming Function. Standard With ACS355 IP66, UL Type 4X.

150 ES

OPMP-01 Cabinet Panel Mounting Control Panel Mounting Platform allows remote mounting of the keypad on a large enclosure or remote panel. The kit maintains UL Type 12 integrity of the mounting location. Adapters, 3 m (10ft) cable and mounting hardware are included in this kit. With this mounting arrangement, the keypad is removable from the panel in a fashion identical to a drive-mounted keypad.

138 ES

ACS/H-CP-EXT Control Panel Mounting Control Panel Mounting Kit for ACS355 drives allows remote mounting of the keypad on the door of an enclosure. The kit includes a 10 ft (3 m) CAT 5 patch cable, gasket for NEMA 12, mounting hardware and drilling template.

55 ES

ACS/H-CP-EXT-IP66 NEMA 4X Cabinet Panel Mounting Allows remote mounting of the ACS-CP-A Operator Panels on a larger NEMA 4X (IP66) enclosure or remote panel. The kit maintains NEMA 4X integrity of the mounting location. All hardware and a mounting template are provided in addition to a 3 m panel cable. The operator is not removable from the front of the enclosure when mounted. The operator panel must be purchased separately.

63 ES

OCAT-01 Panel Extension Cable 7 ft CAT 5 patch cable allows remote operation of the standard panel or connection of the drive to a Personal Computer using the RJ45/DB9 Adapter which must be purchased separately.

40 ES

FEPA-01 Fieldbus Adapter Power Module The optional Auxiliary Power Module allows connecting external 24VDC power source to the FPBA-01 or FCAN-01 fieldbus adapter.

120 ES

FCAN-01 Kit CANopen Adapter CANopen is a higher layer protocol based on the CAN (Control Area Network) serial bus system and the CAL (CAN Application Layer). CANopen assumes that the hardware of the connected device has a CAN transceiver and a CAN controller as specified in ISO 11898. The CANopen Communication Profile, CiA Ds301, includes both cyclic and event driven communication, which makes it possible to reduce the bus load to minimum while still maintaining extremely short reaction times. High communication performance can be achieved at relatively low baud rates, thus reducing EMC problems and cable costs. CANopen device profiles define both direct access to drive parameter and time critical process data communication. The FCAN-01 module fulfills CiA (CAN in Automation) standard DSP 402 (Drives and Motion Control)

325 ES

FDNA-01 Kit DeviceNet Adapter The DeviceNet network uses a linear bus topology. Terminating resistors are required on each end of the trunk line. Drop lines as long as 6 m (20 ft) each are permitted, allowing the attachment of one or more nodes. DeviceNet allows branching structures only on drop lines.

260 ES

FENA-01 Kit Ethernet IP/Modbus TCP Adapter The FENA-01 module supports both Modbus®-TCP and EtherNet/IP™ network protocols. The Modbus-TCP protocol is simply the Modbus protocol used on top of Ethernet-TCP/IP. Modbus-TCP is an open Industrial Ethernet network which has been specified by the Modbus-IDA User Organization. EtherNet/ IP is based on the Common Industrial Protocol (CIP), which is also the framework for both the ControlNet and DeviceNet network protocols. The FENA-01 supports 10/100 Mbps transfer rate with network connections made with CAT 5 wiring and RJ-45 connectors. Both star and bus topology options are supported.

400 ES

FECA-01 Kit EtherCAT Adapter The FECA-01 module supports EtherCAT® network protocol. EtherCAT® is a Real Time Ethernet technology which aims to maximize the use of the full duplex Ethernet bandwidth. It overcomes the overhead normally associated with Ethernet by employing “on the fly” processing hardware. An EtherCAT® bus consists of a master system and up to 65535 slave devices, connected together with standard Ethernet cabling. The FECA-01 supports 10/100 Mbps transfer rate with network connections made with CAT 5 wiring and RJ-45 connectors. Designed for daisy chain configuration on an EtherCAT® network.

400 ES

FPBA-01 Kit PROFIBUS-DP Adapter PROFIBUS is an open serial communication standard that enables data exchange between all kinds of automation components. The physical transmission medium of the bus is a twisted pair cable (according to the RS-485 standard). The maximum length of the bus cable is 100 m to 1200 m, depending on the selected transmission rate. Up to 31 stations can be connected to the same PROFIBUS system without the use of repeaters.

290 ES

FRSA-00 Modbus RTU PCB Similar to the FMBA-01-KIT except as a bare, coated printed circuit board (PCB) with the RS-485 GND as the same potential as the drive I/O GND.

65 ES

ACS355 IP66, UL Type 4X Option Kits



Motors

Unit HandlingM

otorsBrake M

otorsIEC Fram

eM

otors50 HertzM


Motors & Controls

DC Motors

and ControlsGearm


Motor

Accessories

239


Frame Size

H(in)

W(in)

D(in)

Weight(lb)

R1 12.01 7.68 11.06 16.98

R3 17.17 9.69 10.91 28.66

ACS355 UL Type 4X (IP66) Dimensions

D

H

W

ACS355 IP66, UL Type 4X Option Kits Continued


FMBA-01 Kit Modbus RTU Adapter Modbus is a serial, asynchronous protocol. The Modbus protocol does not specify the physical interface. Typical physical interfaces are RS-232 and RS-485. The FMBA-01 provides a galvanically isolated RS-485 interface. Modbus is designed for integration with Modicon PLCs or other automation devices and the services closely correspond to the PLC architecture. The FMBA-01 supports the RTU protocol only.

142 ES

SREA-01-KIT Ethernet Adapter (Gateway) SREA-01 is an optional device for web browser based remote interface to the ACS310 and ACS355 drives via ethernet. This DIN rail mounted adapter enables remote data acquisition through a standard web browser, utilizing an internal web server for drive configuration and access. Multiple drives (up to 10) can be connected to the Modbus-RTU or Modbus-TCP.

1,250 ES

MFDT-01 Flashdrop FlashDrop is a powerful palm sized tool for fast and easy parameter selecting and setting. Only the parameters needed in the application are visible. The tool can upload/download parameters, copy parameters between two drives or between a PC and a drive. Includes DrivePM (Drive Parameter Manager) which is a software tool used to create, edit and copy parameter sets for FlashDrop. The parameter sets can consist of all parameters or only a set of the user parameters.

600 ES

SEDG-01 Ethernet to DeviceNet Gateway SEDG-01 (EtherNet/IP to DeviceNet) will allow a DriveBrowser user to connect a PC’s Ethernet port to drives on a DeviceNet networks.

3,995 ES

SECG-01 EtherNet to ControlNet Gateway SECG-01 (EtherNet/IP to ControlNet) will allow a DriveBrowser user to connect a PC’s Ethernet port to drives on a ControlNet networks.

3,995 ES

3AFE64532871 DriveWindow Light DriveWindow Light is software designed for online drive commissioning and maintenance making it possible to adjust parameters, read the actual values and control the drive with DriveWindow Light instead of the drive control panel. It is also possible to follow trends and draw graphs. An RJ45 to DB9 adapter cable (OPCA-01) is provided to permit connection between the panel port and a PC.

275 ES

3AUA0000041141 DriveBrowser DriveBrowser software is designed for online drive commissioning and maintenance using a computer’s standard Ethernet port to connect to an EtherNet/IP or Modbus-TCP network. It is compatible with the ACS350, ACS355, ACS550, ACH550, DCS800 and ACS800* drives (*ACS800standard control program). Drives require configuration and connection to an EtherNet/IP or Modbus-TCP network.DriveBrowser supports Microsoft Windows operating systems (Windows NT4, 2000, XP & Vista).• Configure network connections• Parameter editing and monitoring• Upload/download drive parameter files, save, print• Compare files• Trending up to four signals• Drive Control for commissioning and test

385 ES

OPCA-01 RJ45/DB9 Adapter This adapter converts the drive’s panel port RJ45 (CAT 5 cable connector) plug to a 9 pin RS-232 computer serial port connector for connecting the drive to a PC.

50 ES

NOTE: (1) This drive is a 3-phase 230V supply UL listed for 1-phase 230V supply.(2) Amperage rating is at 40C, continuous. 50C ratings are available in technical literature.


Grin

ders

Defin

ite P

urpo

seM

otor

sUn

it Ha

ndlin

gM

otor

sBr

ake

Mot

ors

IEC

Fram

eM

otor

s50

Her

tzM

otor

sIn

verte

r/Vec

tor

Mot

ors

& Co

ntro

lsDC

Mot

ors

and

Cont

rols

Gear

mot

ors

and

Gear

Pro

duct

sM

otor

Acce

ssor

ies


240

1/2 thru 2 Hp 97-132 VAC 1 Phase - 50/60 Hz1/2 thru 2 Hp 195-265 VAC 1 Phase - 50/60 Hz2 thru 3 Hp 195-265 VAC 3 Phase - 50/60 Hz1 thru 5 Hp 323-529 VAC 3 Phase - 50/60 Hz

Applications: Variable torque, constant torque or constant horsepowerapplications. New installations, replacements and original equipmentmanufacturers (OEM).

Features: NEMA 4X or open chassis mount standard. Output frequency 0.25 to 120 Hz with peak overload capacity of 150%. Separate accel/decel rates and controlled reversing.

Series 5 Micro Inverters

Output

Ratings

Overload Capacity 150% for 120 seconds

Voltage - 3 Phase 0-230 VAC (RMS), 0-460 V AC (RMS)

ControlSpec

Control Method Sinewave carrier input, PWM output

PWM Frequency Rated 8.0 kHz

V/Hz Ratio Factory set for optimum output

Torque Boost Factory set for 60 Hz motors. Adjustable 6-30% for 50 Hz motors Adjustable 0-30% max

Current Limit Adjustable 63 to 188% of rated output 0-200%

Frequency Setting 0-5 VDC, 0-10 VDC with external resistor network, non-isolated input

Accel/Decel Separate accel/decel rates, 0.3-20 sec for 60 Hz motors 0.3-20 Sec

Combined accel/decel for 50 Hz motors

ProtectiveFunctions

Inverter Trip Over voltage, over current, under voltage, motor overload, output short circuit

Status Indicators Tricolor LED indicator for status and green LED indicator for power on

Short Circuit Output phase to phase

AmbientConditions

Temperature 0-45˚C 0-50°C

Cooling Convection 1/2 - 2 Hp; Forced Air 3-5 Hp Convection

Enclosure Open chassis NEMA 4X (IP65)

Design Specifications

• PWM output

• Accel/decel rate adjustment

• Controlled reversing

• Adjustable current limit

• I2t motor overload protection

• Adjustable slip compensation

• Min/max output

frequency adjustment

• Selectable auto/manual restart

Operator Interface-

Enclosed Units

• Start/Stop command

• NEMA 4X enclosure

• Power on/off

• Rotary speed control

• Fwd/Rev optional

• Auto/Manual optional

Environmental and

Operating Conditions

• Input voltage:

1 phase 115 VAC ±15%,

1 phase 230 VAC ±15%

3 phase 230V ±15%

3 phase 460 ± 15%

• Input frequency

50 or 60Hz ±10%

• Service Factor - 1.0

• Duty - continuous

• Humidity - 90% max RH non-condensing

• Altitude - 3300 feet max without derate

• Chassis mount or NEMA 4X enclosure

as standard

Protective Features

• Selectable automatic restart at

momentary power loss

• Power indicator

• Status indicator

• Adjustable time base overload

• Electronic in rush current limiting



Motors

Unit HandlingM

otorsBrake M

otorsIEC Fram

eM

otors50 HertzM


Motors & Controls

DC Motors

and ControlsGearm


Motor

Accessories

241


Series 5 Micro Inverters continued…

CatalogNumber Hp kW Input

VoltageOutput Current Braking

KitAvailable

Dimensions (Inches)List

PriceMult.Sym.

Approx.Shpg.Wgt.

Outside Mounting HolesCont. 120 Sec. H W D H W

Open Chassis Mount – Single Phase InputID56F50-CO 0.5 0.37 115/230 2.4 3.6 Y 4.3 3.9 2.75 3.8 2.5 395 E9 4

ID5601-CO 1 0.75 115/230 4 6 Y 4.3 3.9 5 3.87 3.7 478 E9 5

ID5602-CO 1.5 - 2 (2) 1.13 - 1.5 115/230 5.5 8.25 N 4.67 5.58 5.7 3.87 2.5 621 E9 6

Open Chassis Mount – Three Phase InputID5202-CO 2 1.5 230 6.7 10.1 N 8.55 4.68 4.5 6.5 3.9 753 E9 5

ID5203-CO 3 2.25 230 8.8 13.2 N 8.55 4.68 4.5 6.5 3.9 793 E9 5

ID5401-CO 1 0.75 460 2.5 3.75 N 8.55 4.68 4.5 6.5 3.9 820 E9 5

ID5402-CO 2 1.5 460 4 6 N 8.55 4.68 4.5 6.5 3.9 842 E9 5

ID5403-CO 3 2.25 460 4.5 6.75 N 8.55 4.68 4.5 6.5 3.9 866 E9 5

ID5405-CO 5 3.7 460 7.6 11.4 N 8.55 4.68 4.5 6.5 3.9 1,104 E9 5

NEMA 1 Enclosed - Single Phase InputID5601-EO 1 0.75 115/230 4 6 N 7.13 6.25 2.75 — — 576 E9 6

NEMA 4X Enclosed – Single Phase InputID5601-WO 1 0.75 115/230 3.6 5.4 N 9.53 5.51 5.86 8.85 — 763 E9 6

ID5601-BO 1 0.75 115/230 3.6 5.4 N 9.53 5.51 5.86 8.85 — 715 E9 6

ID5602-WO 1.5 / 2 (2) 1.13 / 1.5 115/230 5.5/6.7 8.3/10.0 N 9.8 7.55 7.25 9.25 1 1,076 E9 6

ID5602-BO 1.5 / 2 (2) 1.13 / 1.5 115/230 5.5/6.7 8.3/10.0 N 9.8 7.55 7.25 9.25 1 1,015 E9 8

NEMA 4X Enclosed – Three Phase InputID5203-WO 3 2.25 230 9 13.5 N 9.8 7.55 7.25 9.25 1 1,219 E9 6

ID5203-BO 3 2.25 230 9 13.5 N 9.8 7.55 7.25 9.25 1 1,159 E9 6

ID5205-WO 5 3.7 230 17 25.5 N 13.58 10.3 9.8 13.2 1.72 1,731 E9 22

ID5205-BO 5 3.7 230 17 25.5 N 13.8 10.3 9.8 13.2 1.72 1,645 E9 22

ID5403-WO 3 (1) 2.25 460 4.6 6.9 N 9.8 7.55 7.25 9.25 1 1,291 E9 6

ID5403-BO 3 (1) 2.25 460 4.6 6.9 N 9.8 7.55 7.25 9.25 1 1,230 E9 6

ID5405-WO 5 3.7 460 8.3 12.45 N 9.8 7.55 7.25 9.25 1 1,373 E9 6

ID5405-BO 5 3.7 460 8.3 12.45 N 9.8 7.55 7.25 9.25 1 1,315 E9 6

ID5410-WO 10 (3) 7.5 460 16.0 24.00 N 13.8 10.3 9.8 13.2 1.72 2,555 E9 22

ID5410-BO 10 (3) 7.5 460 16.0 24.00 N 13.8 10.3 9.8 13.2 1.72 2,427 E9 22

Catalog Number Description ListPrice

Mult.Sym.

Ap’x. Shpg. Wgt.

ID5RGA-1 Dynamic braking kit for open chassis 115/230V 1/2 Hp and 1 Hp rated controls 214 E9 3

ID5SI-1Signal isolator for open chassis unitsProvides isolation for up to 24 VDC and 4-20mA command signals and run relay output. Select relay as N.O. or N.C. contacts rated at 125 VAC @ 0.5A

213 E9 4

ID5SI-2 Signal isolator for NEMA 4X enclosed unitsProvides isolation for up to 24 VDC and 4-20mA command signals. 240 E9 1

ID5SI-3 Signal isolator for 24 VDC and 4-20mA input signal for ID5205 & ID5410 only. 255 E9 2

ID5AMS-1 Auto/Manual selection switch for NEMA 4X enclosed unitsAllows selection of remote or on-board speed commands 59 E9 1

ID5AMS-2 Auto/Manual selection switch for ID5205 & ID5410 only 94 E9 2

ID5FRS-1 Forward/Stop/Reverse selection switch for NEMA 4X enclosed unitsAllows selection of forward or reverse motor direction commands 33 E9 1

ID5FRS-2 Forward/Stop/Reverse selection switch for NEMA 1 enclosed units. Allows selection of forward or reverse motor direction commands. 33 E9 1

ID5FRS-3 Forward/Stop/Reverse selection switch for ID5205 & ID5410 only. 67 E9 2

NOTES:-BO is dark gray NEMA 4X enclosure, -CO is chassis mount, -EO is dark gray NEMA 1 enclosure, & -WO is white NEMA 4X enclosure(1) Jumper configurable for 1 Hp and 2 Hp(2) ID5602 is rated 1.5 Hp max with 115 VAC input and 2 Hp max with 230 VAC input.(3) Jumper configurable for 7.5 Hp or 10 HpRed Catalog Number indicates NEW Product.

Series 5 Options

Red Catalog Number indicates NEW Product.


Grin

ders

Defin

ite P

urpo

seM

otor

sUn

it Ha

ndlin

gM

otor

sBr

ake

Mot

ors

IEC

Fram

eM

otor

s50

Her

tzM

otor

sIn

verte

r/Vec

tor

Mot

ors

& Co

ntro

lsDC

Mot

ors

and

Cont

rols

Gear

mot

ors

and

Gear

Pro

duct

sM

otor

Acce

ssor

ies

Date post:	30-Nov-2023
Category:	Documents
Upload:	khangminh22
View:	0 times
Download:	0 times

Inverter/Vector Motors & Controls

Documents