LUCKY STEEL BUILDINGS J/S COMPANY Website: www.LuckySteel.vn
Lucky Steel Buildings (LSB) 1
HUMANS INTEGRITY
SOLUTION CARE
CHAPTER 1:
HEADNOTE & ROOT VALUE OF LUCKY STEEL …………..… 3
CHAPTER 2:
MODEL OF SINGLE RESPONSIBILITY ………………………… 6
CHAPTER 3:
PRE-ENGINEERED STEEL STRUCTURE PRODUCT………….. 9
CHAPTER 4:
LUCKY STEEL – COMPETENCE IN BRIEF……..……….……. 29
CHAPTER 5:
CORPORATION, EXPERIENCE…………………………………… 55
www.LuckySteel.vn
CONTENT
2 Lucky Steel Buildings (LSB) 3
VISION At Lucky Steel Buildings, our vision is to become a professional company in the construction industry,
particularly focusing on pre-engineered steel structures.
We aim to enlighten and liberalize people through careful training. As a company, we expand human
resources and invest in our facilities to operate at optimal levels of efficiency and effectiveness.
By 2025, the company’s revenue is projected to grow a minimum of 15% annually and have a brand
name belonging in group of top companies of the PESS (Pre-Engineered Steel Structure) Industry.
Additionally, before 2030, we anticipate our annual revenue to be placed in the top 10 worldwide with
a Rank 2 in the PESS (Pre-Engineered Steel Structure) Industry.
MISSION Our mission is based on creating “solutions” for products and services in the construction industry,
especially within PESS (Pre-Engineered Steel Structures). Lucky Steel Buildings will have a
tremendous and positive impact on the economy through enhanced benefits for the experiences of
the project, customer, partners, sub-contractors, and community.
CULTURE & CORE VALUE
INTEGRITY + GOODNESS + “RESPECT # REPUTATION”
Core Value: Honesty produces Integrity.
“Honesty and Integrity” form the vital base of our company. Integrated with our deep passion to bringing
quality to our products, partners, and community, we combine our wisdom and knowledge to find the best
possible solutions.
Culture: Goodwill, cooperation, and collaboration rooted in Care
We hold a high expectation to communicate with the utmost respect and sense of goodwill for others.
While we pride ourselves in our knowledge and experiences, Lucky Steel Buildings operates on the
foundation of sincerity and genuine care by creating a pleasant working environment for all.
Self-Respect, Respect and Prestige as an integral part of our commitment
Members of Lucky Steel Buildings enter the company with the expectation of upholding themselves to
the highest regard of respect in order to make valuable contributions within the company. We hold
ourselves to be held accountable for our actions, and as such, we respect not only ourselves but others
as well in order to maintain this prestigious company.
We pride ourselves in placing such high importance on rooting our work with a kind, understanding heart.
It is only with such a heart that we can create meaningful products and provide quality, lasting services.
We stand by our promise to you, and we hold our reputation as a company to perform only under such
standards.
MANAGEMENT PHISOLOPHY
“HUMANS” at the ROOT.
“Human” Resource Builds the organization
“Human” Culture Sustains the company and its future.
“Human” Kindness Shares and contributes to the community.
Lucky Steel aims to provide high quality service as we work towards finding better solutions for our
partners and customers alike.
Both individual and group achievements are taken into account in order to continually maintain and
improve our chain of operations. As a company, we understand that it is imperative we are always
polishing our work in order to deliver the best products to our customers, partners, and community
CHAPTER 01
1.1 LUCKY STEEL – FOUNDATION’S VALUE
CHAPTER 1
1.2. HEADNOTE
Construction is an extraordinary industry in and of itself for it belongs to neither the
commercial nor the industrial group. As its own entity within society, construction plays a
monumental role in developing countries. Construction is the root of all projects from
residential to commercial buildings. Industrial factories lay the groundwork for other
manufacturing industries, which paves the path for infrastructure sub-sectors to allow
countries to flourish and develop.
As society continues to develop exponentially over the years, the construction industry has
been forced to adapt and evolve simultaneously from designs to materials to construction
solutions, all of which are vital societal necessities.
Lucky Steel Buildings acknowledges and has done extensive research on the positive
impacts of steel. Years of advancements have allowed steel to gradually replace concrete
as the preferred and more efficient material in construction. More specifically, some key
advantages of using steel in our solutions include its immense strength, lightness,
durability, and fast progression. Furthermore, as our planet continues to grow increasingly
eco-friendly, the construction industry turns more and more to opting for the use of steel
structure for its versatility in usage ranging from simple to complex.
Historically speaking, many famous projects around the world use steel structure, such as
the Chrysler Building in New York and the Eiffel tower in France. In our motherland itself,
Vietnam uses steel structure as the skeleton or core component for many high-rise
buildings, such as the National Symbol Landmark 81.
To say the least, advancement of pre-engineered steel structure within construction has
been expanding widely. In numbers, we have seen a growth in steel-based structures by
more than 10% annually over the past two decades, and we anticipate this number to only
increase in the coming years.
Looking towards the future, Lucky Steel Buildings is confident that PESS (Pre-Engineered
Steel Structure) will gradually replace other construction options for high-rise buildings and
other construction projects alike in developing countries within Southeast Asia, such as
Vietnam. We will be guided by the successful transition of using PESS in other developed
countries, such as Japan, Taiwan, China, and Korea. Using their progress and growth as a
blueprint, we will design a step by step process to provide Vietnam with our own successful
future in using steel structure.
5
There is a growing trend towards construction in general, and in particular, the PESS (Pre-Engineered Steel
Structure) industry. At Lucky Steel Building, we are comprised of a team of experienced and passionate
members who are determined to establish ourselves as a prestigious and quality company. Our slogan
“Building with Care” is our promise to you. We pride ourselves in working with sincerity, honesty, and
integrity.
Here at Lucky Steel Buildings, we have a motto, “How can we work together to foster greater value for our community?” With open minds and a warm heart, we work harmoniously with one another to find better
solutions for the best products and projects.
We extend our most gracious gratitude towards our partners, customers, suppliers, colleagues, and our
management team for we know that no success could be possible for Lucky Steel Buildings without the
collective efforts and assistance from the entire LSB’s family. Truly, you all make each day at Lucky Steel
Buildings full of joy and pleasure.
Lastly, we are committed to standing true to our words of constantly finding better solutions through our
actions.
On behalf of the Board of Directors and founding shareholder’s council, thank you.
COMPLETION & HAND OVER ERECTION TRANSPORTATION PACKING & LOADING
With the experienced design team for many years as well as many different architect projects
For the concept drawings to help customer have the overview about how is project will be looked like
Give the consulting with few options to have optimal design but quality, safety are no compromise
Bidding, Negotiation and finalize the price as well as other terms to sign contract
To go full structure design to issue the design calculation and issue the approval drawings
Checking, inspection by QC with standard ITP
To release fabrication to Manufacture to start production. The production is with standard procedure, inspection to make sure about quality as well as zero error vs shop drawings
Update all comments from customer to have final approved drawings to go for shop drawings step by using 3D soft ware Tekla, Revit… to have minImize error
Defect list, commissioning and hand over project to Customer and service maintenance, warranty
The warehouse department to do packing, planning for loading members phase by phase to smoothly connecting to the erection plan on site
Transportation to job site by truck, container
The hardworking CMD team included of site engineer, supervisor, site manager, safety engineer to coordinate with other site work to manage about cost, sub-contractor, schedule and quality
PRODUCTS
3.1. PRE-ENGINEERED BUILDINGS:
* SKELETON FRAME
* ACCESSORIES
* SHEETING SYSTEM
9
CHAPTER 3:
3.2. OTHER STEEL STRUCTURES:
* KINGPOST & SHORING SYSTEM TO
SERVE FOR BASEMENT WORK OR STEEL
CORE OF HIGH RISE BUIDLING.
* STEEL FRAME TO SUPPORT M & E
* OTHER STEEL FRAME SUCH AS
CONVEYOR, PIPE RACK, OIL GAS
SUPPORTING…
PRODUCT OF PRE-ENGINEERED STEEL STRUCTURE
3.1. PRE-ENGINEERED BUILDING : STANDARD ITEMS
1 Anchor Bolt
2 Primary Frame (Rigid column/rafter)
3 Roof Bracing (Cable or Rod)
4 Wall Bracing (Cable or Rod)
5 Portal Frame Bracing for Wall
6 Crane Bridge
7 Mezzanine system ((Mezz Column,Beam, Joint)
8 Purlin
9 Girt
Boltless panel (Seamlock / Kliplok)
Screwed wall panel (5 ribs/9 ribs)
Roof Monitor / Roof Ventilation / Ridge Vent
Screwed roof panel (5 Ribs/ 9 ribs)
Roof light / Wall light
10
11
12
13
14
Brickwall / Blockwall
Louver
Personal Door/Exit Door
Roll Up Door (RUD)
Fascia
Canopy
Flashing Trims
17
18
19
20
21
16
15 Gutter
Down Spout / Down Pipe
Cage Ladder
Staircase
Bird screen/Net or Insert Screen/Net
24
25
26
23
22
PRODUCT OF PRE-ENGINEERED STEEL STRUCTURE
10 Lucky Steel Buildings (LSB) 11
End Wall
Cold Form Brace
(Sag Rod/Arrestor)
Connection bolt of
main column/rafter
Crane Beam under
Rail Ridge Cap
Side Wall
Decking for Mezz Handrail for Mezz,
Staircase
CROSS SECTION
CURVED CLEAR SPAN
CLEAR SPAN TRUSS RAFTER
CLEAR SPAN
3.1a. PRE-ENGINEERED BUILDING – STANDARD MODULE FRAME
MULTI SPAN 2 / MS2 WITH 2 MIDDLE COLUMNS
MUILTI GABLE 2 – MG2 WITH 2 CLEAR SPAN
MONO SLOPE
MULTI FLOOR STEEL BUILDINGS
MUILTI SPAN 1 / MS1 WITH ONE MIDDLE COLUMN
MULTI SPAN 3 / MS3 WITH 3 MIDDLE COLUMNS
ROOF SYSTEM BUILDING, STEEL FRAME REST ON RC COLUMNS
PRODUCT OF PRE-ENGINEERED STEEL STRUCTURE PRODUCT OF PRE-ENGINEERED STEEL STRUCTURE
12 Lucky Steel Buildings (LSB) 13
3.1b. PRE-ENGINEERED BUILDING – BRACING SYSTEM
X Bracing 2L
SAG ROD
SAG ARRESTOR
3.1c. PRE-ENGINEERED BUILDING – CONNECTION ACCESSORIES
ANCHOR BOLT
Anchor bolt / Foundation Bolt is designed to anchor steel structure to foundation. Normally, the shape of such anchor bolt is either I, L, J The strength is grade 4.6-5.6 – 6.6 with elector galv.
HIGH STRENGTH BOLTS
The bolt for connection of Primary Frame. The high strength bolt as standard of Electrode Galvanized or sometimes are HDG/Bare Black bolt as specified in design. The strength is normally as standard of Grade 8.8, except some special cases of grade 10.9 or S10T, F10T or Torcon Bolts
MACHINE BOLTS
The connection bolts are for secondary frame. It is designed with standard bolt grade 4.6 DIN or ASTM. It is Electro Galv, to be used for connection of Purlin/Girt to Rafter/Columns or some similar connection
PRODUCT OF PRE-ENGINEERED STEEL STRUCTURE
They are included the X roof bracing (For rafter), Wall bracing (For column) to transfer longitudinal load (Caused by wind load or crane load) to foundation. These bracing are normally designed using cable or rod or angle L, 2L. For wall bracing, in some special cases of request about clearance of movement, it is using the Portal bracing which is higher cost.
BRACING FOR PRIMARY FRAME
It is bracing for secondary-frame, this bracing is to have brace point on purlin girt to reduce the effective length and to strengthening the purlin/girt together. Normally, these bracing are using sag rod M12 electro galvanized or Sag Arrestor (2L X connection) or using U between purlin/girt
LATERAL BRACING FOR PURLIN/GIRT
This flange stay is to brace bottom flange of rafter connected to purlin or inside flange of column to girt. The purpose of this bracing is to avoid twist rafter/column during erection time. It is normally using angle L, V (Painted) or L, V, U cold form from purlin coil.
FLANGE STAY/FLANGE BRACE
Cable Bracing
Rod Bracing
PORTAL FRAME
PRODUCT OF PRE-ENGINEERED STEEL STRUCTURE
15 14 Lucky Steel Buildings (LSB)
3.1d. PRE-ENGINEERED BUIDLING – OTHER FRAMES
PRODUCT OF PRE-ENGINEERED STEEL STRUCTURE PRODUCT OF PRE-ENGINEERED STEEL STRUCTURE
The mezzanine is made from steel having big advantage of big span, fast progress of construction and low cost. The Mezzanine is mainly included Mezz column (MC), Main mezz beam (MB), Support beam (Mezz Joint MJ) to support floor which is normally by 3 options : 1. The RC floor with or without decking support 2. Steel checker plate 3. Steel Galv. Grating
Main girder
Checker Plate
PRODUCT OF PRE-ENGINEERED STEEL STRUCTURE
19 18 Lucky Steel Buildings (LSB)
Mezz Beam
Galv. Grating
3.1f. FASCIA SYSTEM
Depending on architecture’s requirement of customer, Lucky Steel will provide the solution for fascia of design,
detail, fabrication, erection.
The below is popular shapes of fascia for reference:
PRODUCT OF PRE-ENGINEERED STEEL STRUCTURE PRODUCT OF PRE-ENGINEERED STEEL STRUCTURE
SIDEWALL FASCIA
TYPE TECHNICAL IMAGE ACTUAL IMAGE
Parapet
Fascia
Vertical
Fascia
Curved
Eave
Top &
Bottom
Curved
3.1f. CANOPY SYSTEM
Canopy is a kind of cantilever roof located at sidewall or endwall in order to create the small area beyond out of
the wall to prevent rain/sun.
Canopy has been positioned above doors such as exist door, rolling door, sliding doors.
The below is popular shapes of canopy for reference:
CANOPY
TYPE TECHNICAL IMAGE ACTUAL IMAGE
Canopy
with soffit
Canopy
without soffit
Canopy with
curved panel
For any other special requirement rather than standard items, Lucky Steel is experienced to discuss and
give the solution to meet your expectation.
For any other special requirement rather than standard items, Lucky Steel is experienced to discuss and
give the solution to meet your expectation.
21 20 Lucky Steel Buildings (LSB)
3.1g. PRE-ENGINEERED BUILDING – SHEETING SYSTEM
SPECIFICATION TECHNICAL IMAGE ACTUAL IMAGE
5 square ribs
panel
9 square ribs
panel
Seamlock panel
Kliplok panel
Decking panel
COVER PANEL & DECKING PANEL
SPECIFICATION TECHNICAL IMAGE ACTUAL IMAGE
Ridge Cap
GableTrim
Cap flashing
Transfer flashing
for roof monitor
Drip Trim
Outside Corner
Trim
TRIM
3.1g. PRE-ENGINEERED BUILDING – SHEETING YSTEM
With experienced employees over 20 years in Pre-Engineered Filed, we always want to consult and develop
optimal cover solution for every project (function, location, weather…)
The below table contains some of standard cover system:
For any other special requirement rather than standard items, Lucky Steel is experienced to discuss and
give the solution to meet your expectation.
For any other special requirement rather than standard items, Lucky Steel is experienced to discuss and
give the solution to meet your expectation.
PRODUCT OF PRE-ENGINEERED STEEL STRUCTURE PRODUCT OF PRE-ENGINEERED STEEL STRUCTURE
23 22 Lucky Steel Buildings (LSB)
3.1g. PRE-ENGINEERED BUILDING – ORTHER FINISHING ACCESSORIES 3.1g. PRE-ENGINEERED BUILDING – ORTHER FINISHING ACCESSORIES
SKY-LIGHT
With many profile to match to roof metal panel such
as square ribs, kliplok, seamlock, 5 ribs…
WALL-LIGHT
With many profile to match to wall metal panel,
popular as square ribs. It can be arranged by
vertical axis or horizontal axis
LOUVER
It helps to have nature air ventilation. There are few
options of materials such as galvanized steel,
powder painting, aluminum.
INSULATION
There are many kinds of insulation such as air
bubble, fiberglass, rockwool. We cooperate to high
trusted supplier.
STAIRCASE
BIRD MESH / INSECT MESH
CAGE LADDER CHECKER PLATE
TYPE TECHNICAL IMAGE ACTUAL IMAGE
Eave gutter
Valley gutter
Metal downspout
DRAINAGE SYSTEM
The above sizes are for reference, Lucky Steel can supply many kinds of different thickness, different
size following customer’s demand/design’s requirement
PRODUCT OF PRE-ENGINEERED STEEL STRUCTURE PRODUCT OF PRE-ENGINEERED STEEL STRUCTURE
25 24 Lucky Steel Buildings (LSB)
3.1h. PRE-ENGINEERED BUILDING – CRANE SYSTEM
The Pre-Engineered Steel Structure is divided into 3 main categories:
* Product Category 1: Pre-engineered Building as call PEB (Factory, low rise building, included sheeting system)
is most popular product as described above. This type is also optional with crane system.
* Product category 2: Steel structure is for high rise building such as Kingpost, shoring system for basement
work.
* Product category 3: Special structures are such as pipe rack system, conveyor system, M&E support, bridge…
BRIDGE BEAM
KING POST SHORING SYSTEM
M&E SUPPORT
STEEL CORE UC BEAM
CONVEYOR SYSTEM PIPERACK
PRODUCT OF PRE-ENGINEERED STEEL STRUCTURE
CRANE SYSTEM (PRODUCT Category 1)
Lucky Steel Building is able to design, fabricate, erection for customized crane system with different shapes, size,
capacity. The below table shows some regular type of crane:
TYPE TECHNICAL IMAGE ACTUAL IMAGE
Top running
cranes
Underhung cranes
Monorail cranes
3.2a. STEEL STRUCTURE FOR HIGH RISE BUILDING (PRODUCT Category 02)
This type of Product is having its general characteristic as heavy members, very thick member size and without
painting. The popular product is Kingpost, shoring system,…
3.2b. SPECIAL STRUCTURE (PRODUCT Category 3)
This is special product for projects of such as pipe rack structure, conveyor system, M&E support, bridge…
PRODUCT OF PRE-ENGINEERED STEEL STRUCTURE
27 26 Lucky Steel Buildings (LSB)
CHAPTER 4
COMPETENCE
IN BRIEF
LUCKY STEEL BUILDINGS, WHY?
“SOLUTION ORIENTED”
REPUTATION MATERIALS, CLEAR ORIGINAL
PRODUCTIVITY FABRICATION, HIGH QUALITY
CONTROL EVERY SINGLE MILE STONE OF
FABRICATION WORK BY STANDARD PROCEDURE
FLEXIBLE TRANSPORTATION METHOD, TO
SYNCHRONIZE TO ERECTION SITE WORK
PROFFESIONAL MANAGEMENT & BE FLEXIBLE
SAFETY ERECTION, HIGH QUALITY
LUCKY STEEL HAS EXPERIENCED TEAM, WE
COMMIT TO ADD REAL VALUE TO CUSTOMER
“SINGLE RESPONSIBILITY” - CONSULT DESIGN FROM BEGINNING.
- APPLY STANDARD CODE IN DESIGN
- SHOP DRAWINGS MODELING BY 3D
- FABRICATION, QUALITY CONTROL
- TRANSPORTATION
- ERECTION
- WARRANTY/MAINTENANCE
29
OPTIMAL DESIGN, FULL DOCUMENTATION
FLEXIBLE, FAST
REACTION
4.1. OPTIMAL DESIGN, FULL DOCUMENTATION
DESIGN CODE
AISC – AMERICAN INSTITUTE
OF STEEL CONSTRUCTION
Consult to technical design by
Allowable Stress
AISI – AMERICAN IRON &
STEEL INSTITUTE
Cold Form steel design manual
MBMA – METAL BUILDINGS
MANUFACTURERS ASSOCIATION AWS – AMERICAN WELDING SOCIETY
Structural welding code-steel manual
ASCE – AMERICAN SOCIETY OF CIVIL
ENGINEERS
Minimum input loads for buildings and other
structures
COMPETENCE IN BRIEF COMPETENCE IN BRIEF
31 30 Lucky Steel Buildings (LSB)
4.1. OPTIMAL DESIGN, FULL DOCUMENTATION
SOFTWARES
1 Structural design: STAAD PRO, SAP
2 Cold-form section design: CFS
3 Shop Drawing: REVIT, TEKLA 21
4 Approval drawing & other drawings: AUTOCAD
IBC
Reference for Loading
4.1. OPTIMAL DESIGN, SYNCHRONOUS DOCUMENTS
Based on preliminary information such as architecture, load, function… The Engineer Department consult and give the solution with optimized design to save cost.
1. GET INFORMATION, ISSUE
PROPOSAL DRAWINGS
Our experienced engineers consider and give solution with optimal design to save cost but make sure to meet original function, safe following the code.
2. STRUCTURAL’S DESIGN
From structural design calculation, we make the detail approval drawing. We submit approval drawings and exchange information deeply with customer, to help customer understand how product look like in future. Then, customer to comment and approve.
3. APPROVAL DRAWINGS
From 3D model Tekla, the fabrication drawings will be issued to system where, the production department will collect them for fabrication at factory.
5. SHOP DRAWINGS
After discussion with CMD about erection method, the Erection drawings will be issued to minimize the time, the cost and ensure safety first. The Erection drawings will be displayed simply and easily comprehension to avoid the mistakes in erection stage.
6. ERECTION DRAWINGS
Weight, quantity of raw materials related to project will be extracted in detail, very high accuracy to let other department plan properly. The actual weight, quantity as shown on Erection Drawing will be finally issued as final BOM, SHOP for final data of project.
7. DETAIL ANALYSIS
As-built drawings are based on erection drawings and adjusted some changes from the site in order to show exactly “Actual Erection” for warranty.
8. AS-BUILT DRAWINGS
33 32 Lucky Steel Buildings (LSB)
From Returned Approval Drawings, we revise the Design Calculation. Then, we go to step of modeling 3D, cross check again with all input information to make sure no error before issuance fabrication drawings.
4. MODEL 3D TEKLA
4.1. OPTIMAL DESIGN, SYNCHRONOUS DOCUMENTS
COMPETENCE IN BRIEF COMPETENCE IN BRIEF
4.2. PRESTIGE MATERIALS 4.2. HIGH QUALITY MATERIAL
VARIETY TYPES
REPUTATION SOURCES
CLEAR ORIGINAL CERTIFICATE
COMPLY TO MANY STANDARDS
TYPE STEEL GRADE/MATERIAL
SPECIFICATION
YIELD STRENGTH
Fy
TENSILE STRENGTH
Fu
Built-up
member
(Steel plate)
SS400, Q235, ASTM A36
SM490, Q345, ASTM A572 Gr. 50
Fy = 235 Mpa
Fy = 345 Mpa
Fu = 400 Mpa
Fu = 450 Mpa
Shape Steel
(Hot-roll
members)
SS400, ASTM 36 Fy = 235 Mpa Fu = 400 Mpa
Cold-form
members JIS G3112, ASTM G340/G450
Fy = 340 Mpa
Fy = 450 Mpa Fu = 450 Mpa
Round bar/
angle
bracing
SS400, ASTM A36 Fy = 235 Mpa Fu = 400 Mpa
Cable
bracing EN, GB, JIS Fu = 1470 Mpa
Anchor Bolt SS400, ASTM A36 – Grade 4.6
(Or Equivalent) Fy = 235 Mpa Fu = 400 Mpa
High
Strength
Bolt
Grade 8.8 : ASTM-A325 or DIN
Grade 8.8 ( Or Equivalent) Fu = [710 – 830] Mpa
Bolt A307, DIN 976-1 Grade 4.6 ( Or
Equivalent) Fu = 400 Mpa
Cover panel G300/G350/550
Fy = 300 Mpa
Fy = 350 Mpa
Fy = 550 Mpa
Beside the standard specification above, Lucky Steel is able to provide many other specifications to meet
project’s requirement.
ASTM: American Society for Testing & Material
JIS: Japanese Industrial Standards
EN: Europe Standard
GB: Chinese Standards
TCVN: Vietnamese Standard
HIGH GRADE MATERIAL THAT COMPLY WITH MULTI-NATIONAL STANDARDS
LUCKY STEEL’S MATERIAL STANDARD
35
COMPETENCE IN BRIEF
4.3. PRODUCTIVITY FABRICATION, HIGH QUALITY
FACTORY NEW MACHINE
SUFFICIENTLY PRODUCTION LAYOUT
HIGH-SKILL LABOR
MODERN MACHINERY
37 32 Lucky Steel Buildings (LSB)
4.3. PRODUCTIVITY FABRICATION, HIGH QUALITY
39 38 Lucky Steel Buildings (LSB)
ISO
9001:2015
FACTORY AREA: 9,000M2
MY PHUOC 3 IP, BEN CAT, BINH
DUONG PROVINCE (~ 50KM AWAY
FROM HO CHI MINH CITY)
CAPACITY: 12,000 MT/ YEAR
PRODUCTION SINCE: 2015
4.3. PRODUCTIVELY FABRICATION AND HIGH-QUALITY
The FACTORY is located at My Phuoc 3 IP, Binh Duong Province where has a lot of high-skill labors in steel fabrication and convenient traffic. The distance is around 1h traffic from the airport, sea port Capacity : 1,000 Tons/Month Production machinery is new, layout is arranged tidily.
PAINTING AREA
PRODUCTION LINE IN EFFECTIVENESS
4.3. PRODUCTIVELY FABRICATION AND HIGH-QUALITY
41 40 Lucky Steel Buildings (LSB)
COMPETENCE IN BRIEF COMPETENCE IN BRIEF
4.3. PRODUCTIVELY FABRICATION AND HIGH-QUALITY
STEEL WAREHOUSE
STRAIGHTENING MACHINE
STEEL PROCESSING AREA
SHOT BLASTING MACHINE
AUTO WELDING MACHINE
4.3. PRODUCTIVELY FABRICATION AND HIGH-QUALITY
43 42 Lucky Steel Buildings (LSB)
COMPETENCE IN BRIEF COMPETENCE IN BRIEF
4.4. QUALITY CONTROL FOR EACH STAGE OF FABRICATION BY CLEAR PROCEDURES
MANAGED BY PROCEDURES
INSPECTION IN EVERY SINGLE STEP
EQUIPEMENT, MACHINERY IS CALIBRATED
45 44 Lucky Steel Buildings (LSB)
Quality of product is come
from direct production, tiny
added from QC. It is
responsible for each step.
STEEL PLATE RAW MATERIAL
INPUT CUTTING/SHEARING FITTING UP
STRAIGHTENING FINISHING FIT UP FINISHING WELDING
PAINTING PACKAGED & DELIVERY
BUILT-UP PRODUCTION PROCEDURE AND QUALITY CONTROL PROCEDURE
