TABLE OF CONTENTS

PAGE

2

SERIES/PRODUCT PAGE (S)Ruko Knife Centers & Displays 3-6Ruko Skinners & Hunters By Muela ® 7Muela ® Red Stag Horn -Top 10 Sellers 8Muela ® Pakkawood -Top 10 Sellers 9Muela ® Kraton/Nylon -Top 10 Sellers 10Outfi tter Series 11-19OEM, Custom Logo & Laser Engraving 20Wild For Game ® Pocket Knives 21Classic Pocket Knives 22Folding Knives 23-25Torx Set And Sheaths 26Tactical Folding Knives 27-28Socius

® Folding Knives 29SHARK

® Lever Action Knives 30SHARK

® Assisted Opening Knives 31-33Ti-Tactical ® Series 34Survival Knives & Axes 35Neck & Boot Knives 36Boot, Survival & Dive Knives 37Machete, Saws & Work Knives 38Throwing Knives 39Pierre Cazoulat Throwing Knives 40EOD-THROWERS ® Throwing Knives 41Arkansas Whetstones & Accessories 42Diamond & Carbide Sharpeners 43NIJ Approved Handcuffs 44Security Items 45Compasses & Travel Accessories 46 Dip ‘N Clip

® 47

For further information, please contact :In U.S.A: In Canada: Mailing Address: RUKO Outdoor Products Inc. RUKO LLC 7 Alpha Mills Road PO Box 38 Mississauga, Ontario Buffalo, NY 14207-0038 Canada L5N 1H4 Tel: (905) 826-1341 Information: info@rukoproducts.com Fax: (905) 826-1353 Visit us on the web: www.rukoproducts.com; www.rukoknives.com

CONTACT US TOLL FREE TEL: 1-800-611-4433 OR FAX: 1-888-755-7666

All RUKO products are covered by a lifetime warranty against defects in materials or manufacturing to the original consumer purchaser. Defective products will be repaired or replaced with the same or substitute item of equal value at RUKO’s sole discretion. This warranty does not cover transportation charges to RUKO, loss,

self repair or damages due to misuse, abuse or lack of normal maintenance.Mossy Oak®, Elements Agua®, Bo omland®, are trademarks used under license from Haas Outdoors, Inc by RUKO LLC

RUKO®, SHARK ®, Dip ‘N Clip®, End of Days®, SRDS-Tac cal®, EOD-Tac cal®, Ti-Tac cal®, Wild For Game®, Safe-Sharp®, Quick-Gut®, WX-3D®, Woodland Xtreme-3D®, Hydra-X™, Load & Lock™, SOCIUS™ are registered trademarks of RUKO LLC, RUKO Outdoors Products Inc. and/or RUKO of Canada. TUNDRA™, 3DX™, WINGS-3D™ and Woodland Xtreme-3D® camoufl age pa erns are copyright protected by RUKO LLC. Unauthorized use is prohibited by law. All rights reserved. © RUKO 2018

RQSM-MS FEATURES: * Displays up to 50 models * Organized by retail price point or category *Display pieces are individually priced with bin number location for easy customer servicing andreordering * Locking safety glass doors * Adjustable inventory bin organizers * Locking lowerstorage drawer * Super slide castors for easy display repositioning * Supplied with customizedreorder forms * Red Mahogany finish * US Patent #5690402 Display dimensions - H: 60” W: 34”D: 24” PAGE

3

RUKO KNIFE CENTERSA patented customized cutlery merchandiser program where you select themodels and we build it. Display panels are pre-assembled for easy set-up.

RQSM-S: the newsest edition to our customized cutlery merchandiser program. Designed for locations with limited floor space, this newunit has a host of quality features found in our flagship RQSM-MS. Durable Red Mahogany finish masonite construction * Organized by retail pricepoint or product category * Displays up to 30 assorted models - your choice * Heavy duty casement style door with 3 Plexiglass covered displaypanel sections * Tamper-proof pin lock system * 3 removeable and customizeable display panels * Display pieces are individually priced with binnumber/retail label for easy customer servicing * Adjustable inventory bin organizers with bin numbering system * Bottom castors for easy display repostioning * Hollow base for storage of display piece boxes * Base is removeable for placement on gondolas or end caps * Supplied with customer specific reorder forms for easy reordering Display dimensions - H: 57” W: 25.5” D: 20”

RUKO KNIFE CENTERS

PAGE4

RUKO KNIFE CENTERS

PAGE5

CT DISPLAY:A popular alternative to our larger MIDRQSM floor display.

Displays up to 15 models of fixed bladesand folders * Pre-ticketed display panel withretail header and retail labels with model # *Drop out rear access panel with lock * Twodivided shelves in rear storage compartment* Plexiglass protective panel * Red Ma-hogany finish.Display dimensions - H: 20” W: 19” D: 15.5”

CTW DISPLAY:As above wall unit. Holds display panel onlywith no storage.Display dimensions - H: 20” W: 19” D: 6”

PLEXIGLASS COUNTER DISPLAY & RISERS

PAGE6

RPCT: Double-sided plexiglass display. Displays up to 30 models of fixed blades and folders oraccessory items on 10 shelves (5 shelves per side) * Locking access doors on each side *Rotating pedestal base. Display dimensions - H: 25” W: 16” D: 17.25” RPCTS: as abovewith 2 shelves only. Displays 12 models. H: 12” W: 14” D: 7” RPFD: as above with MDFkey lock storage base, 7 shelves per side, display up to 60 models. H: 69” W: 19” D: 19”

PLEXIGLASS RISERS:Waterfall style plexiglass risers to organize yourknife selection under glass or for impulse saleson top of your counters. Unique design allowsfor easy handling of up to 7 patterns at a time.Supplied with RUKO header and thumb con-trol slot. 2 styles to choose from:

RPDS6: for 6 fixed bladesDimensions - H: 5.25” W: 3.75” D: 11”

RPDSF7: for 7 foldersDimensions - H: 5.25” W: 3.75” D: 9.75”

Handcrafted knives made exclusively for RUKO in Spain by MUELA. Genuine red stag horn &pakkawood handles, razorsharp X50CrMoV15 stainless steel blades, solid brass guards and pom-mels, rat tail tang blade designs, handstitched genuine leather sheaths. Lifetime Warranty.

RUKO SKINNERS & HUNTERS BY MUELA

RUK001: red stag horn skinner, gut hook blade, rat tail tang, full graincross snap leather sheath, blade: 4-1/2” overall: 8-3/4”

RUK002: red staghorn skinner, clippoint blade, rat tailtang, full grain crosssnap leather sheath,blade: 4-1/4”overall: 8-1/4”

WHITETAIL-8A: red staghorn skinner, gut hookblade, rat tail tang, fullgrain cross snap leathersheath, blade: 3-1/8”overall: 7-3/4”

WHITETAIL-8S: crownred stag horn skinner,gut hook blade, rat tailtang, full grain cross snapleather sheath,blade: 3-1/8” overall: 8”

RUK0037: red staghorn hunter, rat tailtang, full grain crosssnap leather sheath,blade: 4-3/4”overall: 9-1/2”

RUK0038: red staghorn field, rat tail tang,full grain slip leathersheath, blade: 4”overall: 7-1/4”

RUK0062: red stag horn skinning set, includes RUK001 gut hookskinner and caper, rat tail tang design, skinning blade: 4-1/2”overall: 8-3/4 caping blade: 3-1/2” overall: 7-1/2“ PAGE

7

RUK0039R: red pakkawood bird& trout, rat tail tang, full grain slipleather sheath, blade: 3”overall: 6”

MUELA RED STAG HORN - TOP 10 SELLERS

PAGE8

COL-7A: red stag hornskinner, X50CrMoV15stainless steel, slabstag handle scales,solid brass guards, fulltang, full grain slippocket leather sheath,blade: 2-3/4”overall: 6-1/4”

SH-8: red stag horn fieldknife, X50CrMoV15stainless steel, solidbrass guard and pom-mel cap, rat tail tang, fullgrain button snapleather sheath,blade: 2-3/4”overall: 7-1/8”

GAZAPO-8A: red staghorn skinner, slabstag handle scales,X50CrMoV15 stainlesssteel, full tang, full graincross snap leathersheath, blade: 3-1/8”overall: 6-1/4”

CAZ-16: crown redstag horn bowie,X50CrMoV15 stainlesssteel, solid brassguard, rat tail tang, fullgrain button snapleather sheath,blade: 6-1/4”overall: 11-3/8”

BRACO-11A: red staghorn field knife,X50CrMoV15 stainlesssteel, solid brass choil, rattail tang, full grain crosssnap leather sheath, blade: 4-1/2” overall: 8-1/2”

GRED-12A: red stag hornhunter, X50CrMoV15 stain-less steel, solid brassguard, rat tail tang, full grainbutton snap leather sheath,blade: 4-5/8”overall: 9”

REBECO-9A: redstag horn skinner,X 5 0 C r M o V 1 5stainless steel,slab stag handlescales, solid brassguards, full tang,full grain slippocket leathersheath,blade: 3-1/2”overall: 7-1/2”

TECKEL-8A: red stag hornskinner, X50CrMoV15 stain-less steel, solid brass choil,rat tail tang, full grain crosssnap leather sheath,blade: 3” overall: 6-3/4”

DP-10A: red stag hornskinner, X50CrMoV15stainless steel, solidbrass guard, rat tailtang, full grain buttonsnap leather sheath,blade: 4”overall: 8-5/16”

GL-10A: red stag horn folder,X50CrMoV15 stainless steel,solid brass guard and liners,lockback design, blade: 3-1/2”closed: 4-3/4”

F/GL-10: optional full grainleather belt sheath for GL-10 Series F/GL-10C: asabove with sharpeneningsteel

MUELA PAKKAWOOD - TOP 10 SELLERS

PAGE9

BWF-10: pakkawood fieldknife, X50CrMoV15 stain-less steel, solid brassguard and pommel, rat tailtang, full grain button snapleather sheath, blade: 4”overall: 7-1/2”

DP-10M: pakka-woodskinner, X50CrMoV15stainless steel, solidbrass guard and pom-mel, rat tail tang, fullgrain button snapleather sheath,blade: 4”overall: 7-1/2”

SK-8R: pakkawoodskinner, slab handlescales, X50CrMoV15stainless steel, fulltang, full grain crosssnap leather sheath,blade: 2-3/4”overall: 6-1/2”

MOUSE-6R: pakka-wood skinner, slabhandle scales,X50CrMoV15 stainlesssteel, full tang, full graincross snap leathersheath, blade: 2-3/16”overall: 5-9/16”

SIOUX-10R: pakka-wood skinner, slabhandle scales,X50CrMoV15 stain-less steel, full tang,full grain button snapleather sheath,blade: 4-3/8”overall: 8-3/4”

COL-9R: pakkawoodskinner, slab handlescales, X50CrMoV15stainless steel, fulltang, full grain buttonsnap leather sheath,blade: 3-1/2”overall: 8-1/8”

GRIZZLY-12R: pakka-wood gut hook skin-ner, slab handlescales, X50CrMoV15stainless steel, fulltang, full grain buttonsnap leather sheath,blade: 4-7/8”overall: 9”

RANGER-12: pakkawoodhunter, X50CrMoV15 stain-less steel, solid brass guardand pommel, rat tail tang, fullgrain button snap leathersheath,blade: 4-5/8”overall: 8-3/4”

BISONTE-11R: pakka-wood gut hook skin-ner, slab handlescales, X50CrMoV15stainless steel, fulltang, full grain buttonsnap leather sheath,blade: 4-3/8”overall: 8-3/4”

BW-14: pakkawood bowie,X50CrMoV15 stainlesssteel, solid brass guard andpommel, rat tail tang, fullgrain button snap leathersheath, blade: 5-1/2”overall: 10”

MUELA KRATON/NYLON - TOP 10 SELLERS

PAGE10

25-10: kraton rubbercamp knife, 420HCstainless steel, blackfinish zamak guard,rat tail tang, buttonsnap leather sheath,blade: 4” overall: 8”

25-12: kraton rubberfield knife, 420HCstainless steel sawback blade, black finishzamak guard, rat tailtang, button snapleather sheath, blade:4-5/8” overall: 8-5/8”

7100: nylon/zamakcamp knife, 420HCstainless steel, gold fin-ish zamak guard, rattail tang, button snapleather sheath,blade: 4”overall: 7-3/4”

PIK-AS-R: kraton rub-ber skinner, 420HCstainless steel, blackfinish zamak guard, rattail tang, button snapleather sheath, blade:3-3/4”overall: 7-3/4”

COMG-16: kratonrubber survivalknife, 420HC stain-less steel saw backblade, rat tail tang,quick release ABSsheath, blade: 6-1/4”overall: 10-9/16”

95-180: nylon/kratonbowie knife, 420HCstainless steel, goldfinish zamak guard,rat tail tang, buttonsnap leather sheath,blade: 7-1/8”overall: 11-7/16”

55-16: kraton rubbersurvival knife, 420HCstainless steel sawback blade, black fin-ish zamak guard, rattail tang, button snapleather sheath, blade:6-1/4” overall: 10-3/4”

5161: nylon/zamaksurvival knife, 420HCstainless steel sawback blade, black fin-ish zamak guard, rattail tang, button snapABS sheath with nylonfrog, blade: 6-1/4”overall: 10-1/4”

7180: nylon/zamakbowie knife, 420HCstainless steel,gold finish zamakguard, rat tail tang,button snap leathersheathblade: 7-1/8”overall: 11-7/16”

RACCOON-8G: kratonhandle gut hook skinningknife, X50CrMoV15 stain-less steel blade with stri-ated finger and thumbrests, stainless steelguard & lanyard snapleather sheath, blade: 3-3/4” overall length: 8”

Our most popular folding knife pattern available in a variety of color finishes to meet your sporting, hunting and tactical needs. High quality featuresinclude 440A oxide finish stainless steel blade, vented non-slip rubberized aluminum handle, reversible stainless steel pocket clip, ambidex-trous thumb stud, locking liner design, blade: 3-1/4" closed: 4-3/4"

RUK0075 SERIES

RUK0075-3DX: 3DXTREME™ Camouflage, boxedRUK0075-3DX-CS: 3DXTREME™ Camouflage, clamshell

RUK0075: WX-3D® Camouflage, boxedRUK0075-CS: WX-3D® Camouflage, clamshell

RUK0075TND: TUNDRA™ Camouflage, boxedRUK0075TND-CS: TUNDRA™ Camouflage, clamshell

RUK0075WG3D: WINGS-3D™ Camouflage, boxedRUK0075WG3D-CS: WINGS-3D™ Camouflage, clamshell

RUK0075BK: black, boxed RUK0075BK-CS: clamshell

RUK0075HG: high visibility green, boxed

RUK0075XX-LE: for your promotional programs, customize your knifewith your store or corporate logo in high quality laser engraving. Mini-mum order quantity applies. Contact us for details.

RUK0075PK: pink, boxed

PAGE11

RUK0075BZ: blaze orange, boxed RUK0075BZ-CS: clamshellRUK0075BL: Mossy Oak Original Bottomland® Camouflage, boxed

Our popular folding knife pattern available in a variety of color finishes to meet your sporting, hunting and tactical needs. High quality featuresinclude 440A oxide finish stainless steel blade, non-slip rubberized aluminum handle with grip tape inserts, reversible stainless steel pocket clip,ambidextrous thumb stud, locking liner design, blade: 3-1/4" closed: 4-3/4"

RUK0061/118 SERIES

RUK0061: WX-3D® Camouflage, boxedRUK0061-CS: WX-3D® Camouflage, clamshell

RUK0061TND: TUNDRA™ Camouflage, boxedRUK0061TND-CS: TUNDRA™ Camouflage, clamshell

RUK0061HG: high visibility safety green, boxedRUK0061HG-CS: high visibility safety green, clamshell

PAGE12

RUK0061BZ: blaze orange, boxed

RUK0061XX-LE: for your promotional programs, customize your knifewith your store or corporate logo in high quality laser engraving.Minimum order quantity applies. Contact us for details.

RUK0061EAM: Mossy Oak Elements Agua Marlin® Camouflage,boxed

RUK0061BK: black, boxed

RUK0061PL: purple, boxedRUK0061PL-CS: purple, clamshell

RUK0118: WX-3D® camouflage multi blade folding knife, 440A oxidefinish stainless steel main blade, saw and combination gut-hookblade, non-slip rubberized aluminum handle, easy-open thumb studon main blade, triple locking liner design, 2-position 600D nylonmolded sheath, blades: 3-1/2” closed: 4-1/2” RUK0118-CS: as above in clamshell packaging.

RUK0150GHCA: large frame WX-3D® camouflage gut hook foldingknife, locking liner design, 440A stainless steel, ambidextrous thumbstud opening, non-slip RhinoHide™ molded rubber handle insert, 2-po-sition 600D nylon molded sheath, boxed, blade: 4” closed length: 5”RUK0150GHCA-CS: as above clamshell packaging

PAGE13

RUK0059/154/155 SERIES

RUK0150CA: large frame WX-3D® camouflage folding knife, lockingliner design, 440A stainless steel, ambidextrous thumb stud opening,non-slip RhinoHide™ molded rubber handle insert, 2-position 600D ny-lon molded sheath, boxed, blade: 4” closed length: 5.75”RUK0150CA-CS: as above clamshell packaging

Camouflage gut hook folding knife, 440A oxide finish stainless steel blade,non-slip rubberized aluminum handle, ambidextrous thumb stud, lock-ing liner design, 2-position 600D nylon EVA molded sheath,blade: 3-1/2” closed: 4-5/8”RUK0106GH: WX-3D® camouflage, boxed packagingRUK0106GH-CS: WX-3D® camouflage, clamshell packagingRUK0106GHTND: TUNDRA™ camouflage, boxed packagingRUK0106GHTND-CS: TUNDRA™ camouflage, clamshell packaging

Camouflage drop point folding knife, 440A oxide finish stainless steelblade, non-slip rubberized aluminum handle, ambidextrous thumb stud,locking liner design, 2-position 600D nylon EVA molded sheath,blade: 3-1/2” closed: 4-5/8”RUK0106: WX-3D® camouflage, boxed packagingRUK0106-CS: WX-3D® camouflage, clamshell packagingRUK0106TND: TUNDRA™ camouflage, boxed packagingRUK0106TND-CS: TUNDRA™ camouflage, clamshellpackaging

Gut hook skinning knife featuring: 440A oxide finish stainless steel blade,non-slip rubberized aluminum handle, striated thumb rest, 600D nylonmolded sheath, blade: 3-1/2” overall: 7-3/4”RUK0105: WX-3D® camouflage, ridged handle, boxedRUK0105-CS: WX-3D®, ridged handle, clamshell packagingRUK0105TND: TUNDRA™, ridged handle, boxed packagingRUK0105TND-CS: TUNDRA™, ridged handle,clamshell packagingRCOMBO10-CS: WX-3D® combination pack including RUK0105 gut-hook skinning knife and RUK0075 folding knife, clamshell packagingRUK0105BZ: blaze orange with grip tape handle inserts and black 600Dnylon sheath, boxedRUK0105BZ-CS: as above in clamshell packagingPAGE

14

RUK100/105 SERIES

Hunting knife, 440A oxide finish stainless steel blade, non-slip rubber-ized aluminum handle, 600D nylon molded sheath, blade: 4-1/8” over-all: 8-1/4”RUK0100: WX-3D® camouflage, ridged handle, boxedRUK0100-CS: WX-3D®, ridged handle, clamshell packagingRUK0100TND: TUNDRA™ camouflage, ridged handle, boxedRUK0100TND-CS: TUNDRA™, ridged handle, clamshell packagingRUK0100BZ: blaze orange with grip tape handle inserts and black 600Dnylon sheath, boxedRUK0100BZ-CS: as above in clamshell packagingRUK0100HG: high visibility green with grip tape handle inserts and black600D nylon sheath, boxed RUK0100HG-CS: as above in clamshell packaging

RUK0154GHCA: large frame WX-3D ® camouflage fixed blade hunt-ing knife, 7Cr17MoV stainless steel gut hook blade, 4mm rat tailtang, rubberized GFR nylon handle with non-slip RhinoHide™molded rubber handle insert, 600D nylon molded EVA sheath, boxed,blade: 4-1/2” overall length: 10-1/4” RUK0154GHCA-CS: as aboveclamshell packaging

RUK0154CA: large frame WX-3D ® camouflage fixed blade huntingknife, 7Cr17MoV stainless steel drop point blade, 4mm rat tail tang,rubberized GFR nylon handle with non-slip RhinoHide™ moldedrubber handle insert, 600D nylon molded EVA sheath, boxed, blade:4-1/4” overall length: 10” RUK0154CA-CS: as above clamshell pack-aging

RUK0155: WX-3D® camouflage gut-hook skinning knife, 440A oxide fin-ish stainless steel blade, non-slip rubberized aluminum handle with griptape inserts, striated thumb rest, 600D nylon molded camouflage sheath,blade: 3-1/2” overall: 8” RUK0155BZ: as above in blaze orange withblack 600D nylon sheath.

OUTFITTER KNIVES & TOOLS

RUK0055: WX-3D ® camouflage 420A stainless fine blank multi-plier;non-slip rubberized finish with rubber handle inserts; spring loaded plierhead; built-in LED light; features: saw, scissors, awl, small blade, flathead and Philips screwdrivers, can opener, cap lifter, file; 600D nylonpadded EVA sheath, boxed, open length: 6-1/8” closed length: 4” PAGE

15

Built-In LED Light

RUK0059: 2 pc skinning set, 420A stainless steel, non-slip RhinoHide™blaze orange polypropylene handles, black 600D nylon sheath, (gut hook)blade: 4-1/4” overall length: 9-1/8” (caper) blade: 3-1/2” overall length:7”, boxed RUK0059-CS: as above clamshell packaging. RUK0059BK:as above black handles with WX-3D ® camouflage sheath,boxed RUK0059BK-CS: as above clamshell packaging

PAGE16

OUTFITTER WILD FOR GAME WILD FOR GAME WILD FOR GAME WILD FOR GAME WILD FOR GAME ®

RUK0131: Wild For Game ® Fish & Game processing set, razor sharp 420A stainless steel blades, non-slip RhinoHide™ high visibility polypropy-lene molded handles, complete assortment for cleaning all types of fish and game, dishwasher safe, cutting board, protective hard nylon case.Lifetime Warranty.

11 piece set includes the following:* 4-1/4” blade gut hook skinning knife* 7-1/8” blade filleting knife* 5-1/2” blade big game skinning cleaver* 3-3/8” blade caping knife* 3-3/8” blade small game skinning knife* 5-5/8” blade T-handle bone saw* heavy duty game shears with oversized rubber grip* Quick-Gut ® gutting tool* Safe-Sharp ® double carbide sharpener with hand guard for knives and shears* 9-7/8” X 13-3/4” 3mm cutting board* hard nylon case

RUK0132: Wild For Game ® 6pc fish & game processing kit; 420A stainless steel blades;non-slip RhinoHide™ high visibility polypropylene molded handles; dishwasher safe; protec-tive hard nylon case doubles as cutting board; includes: 4-1/4” gut hook skinning blade; 7-1/8” filet/boning blade, 3-3/8” caping blade; heavy duty game shears with oversized rubbergrips; Safe-Sharp ® double carbide sharpener with hand guard for knives and shears, 4-color wrap packaginglength: 15.75” width: 7.5” height: 2”

RUK0113-CS: Quick-Gut® gutting tool, texturedblaze orange nylon handle, supplied with 2-replace-ment blades, 600D nylon sheath, accomodatesafter-market blades, clamshell packaging

RUK0115-CS: magnesium ferrite fire starter with integratedemergency whistle; safety orange glass fiber reinforced nylonhousing; stainless steel striker plate; clamshell packaging, strikerlength: 1.65” striker diameter: 6mm overall length: 3.15”

HYDRA-X ™ & SHARPENERS

RUK0114-CS: Safe-Sharp® carbide blade and ceramic rod pocketsharpener; safety orange GFR molded nylon housing; integratedemergency high pitch whistle; lanyard loop, clamshell packaging,length: 3.5” width: 7/8” height: 1/2” PAGE

17

RUK0133CA: HYDRA-X ™outdoor adventure set withRUKO LOAD & LOCK™blade exchange system.Our simple to use lockbackmechanism allows you tochange blades in seconds.Choose from 4 bladepatterns: 4” clip point,4” gut hook, 6” boning/filet or 6”wood saw. Razor sharp 7Cr17MoV stainless steel(blades) and electroplated M65 spring steel (saw);blaze orange EDM finish GFR nylon handle withnon-slip RhinoHide™ molded rubber handle insert;includes magnesium ferrite fire starter and Safe-Sharp® carbide blade/ceramic rod combo sharp-ener with integrated emergency whistle; moldedEVA 600D nylon WX-3D® camouflage case withzippered storage pockets and multi-carry system,boxed, handle: 5.5”RUK0133CA-CS: as above clamshellpackaging

RUK0133B: as above black 1680D nylon case,boxed RUK0133B-CS: as above clamshell

NK813-40K: lockback folding knife, hardwood handle, 420A stainlesssteel, blade: 3-1/2” closed: 4-3/8”NK813-40K-CS: as above in clamshell packaging

OUTFITTER SERIES

PAGE18

RUK0074: skinning set, 3-1/2” gut hook blade skinner with 3-1/4” bladeclip point folding knife, 440A stainless steel blades, pakkawood handlescales, full tang blade and locking liner design, 1000D nylon sheath,fixed blade-overall: 8”, folding knife-closed: 4-1/2”

K9438: thumb style skinning knife, 420A stainless steel blade, lanyard, simulated leather belt sheath, overall: 4”

JY7035NP: nylonhandle folding knife,440A stainless steel, guthook blade, lockbackdesign, easy-openthumb hole, pocket clip,blade: 3-1/2 closed: 4-3/4”

RUK0092: lockback folding knife; 440A stainless steel clip pointblade; pakkawood handle scales; stainless steel bolsters; 1680Dnylon padded EVA sheath, boxed, blade: 3-/12” closed length: 4-3/8” RUK0092-CS: as above clamshell packaging

NK924-9SH: ABS handle hunting knife, aluminum bolsters and pom-mel, 420A stainless steel blade, PVC sheath, blade: 5-3/4” overall:10-1/4”

PAGE19

OUTFITTER SERIES

RUK0080: Delrin® simulated deer horn handle hunting knife, brass bol-sters and pommel, 440A stainless steel blade, leather sheath w/sharp-ening stone, blade: 5” overall: 9-3/8” RUK0080-CS: as above inclamshell packaging.

RUK0081: Delrin® simulated deer horn handle hunting knife, full tangdesign, 440A stainless steel blade, leather sheath, blade: 3-1/4”overall: 7” RUK0081-CS: as above in clamshell packaging.

RUK0094: RUKO SHARK® filet knife, non-slip rubber handle with ABSinsert, 420J2 stainless steel blade, self-draining ABS belt sheath, blade:6-1/2” overall: 12-1/4”, boxed RUK0094-CS: as above, clamshell pckg.

RUK0095: RUKO SHARK® filet knife, non-slip rubber handle with ABSinsert, 420J2 stainless steel blade, self-draining ABS beltsheath, blade: 8-1/8” overall: 13-7/8”, boxed

RUK0078: ABS handle hunting knife, aluminum bolsters and pommel,440A stainless steel blade, leather sheath, blade: 3-7/8” overall: 7-3/4”RUK0078-CS: as above in clamshell packaging

OEM, CUSTOM LOGO & LASER ENGRAVING

PAGE20

We offer a variety of fixed blade and folding knives with custom logo acid etching and laser engraving on the blade or handles. Inaddition select models in our program can be modified to accomodate custom logo graphics on the handles, badge inlays, customleather sheaths and packaging. We specialize in bringing your OEM model designs to reality with reasonable production run mini-mums. Contact us for further details.

WILD FOR GAME WILD FOR GAME WILD FOR GAME WILD FOR GAME WILD FOR GAME ® COLLECTION

PAGE21

RUK0130SET-CS: Wild For Game® Collectors Set, nylon handle featuring high resolution images of 6 popular gamespecies (Black Bear, Coyote, Elk, Mallard Duck, Whitetail Deer and Wild Turkey), gold finish metal badge insertfeaturing matching species game track, species name engraved on main blade, 420A stainless steel, blade: 2-1/2”closed: 3-1/2”, clamshell packaging

A) RUK0130WD: as above WHITETAIL DEER image, boxedB) RUK0130EK: as above ELK image, boxedC) RUK0130MO: as above MOOSE image, boxedD) RUK0130BB: as above BLACK BEAR image, boxedE) RUK0130CY: as above COYOTE image, boxedF) RUK0130WT: as above WILD TURKEY image, boxedG) RUK0130MD: as above MALLARD DUCK image, boxedH) RUK0130BE: as above BALD EAGLE image, boxedI) RUK0130USA: as above with USA FLAG image, boxed

A

G

E

D

C

H

I

F

B

RUK0046YB: 2 blade trapper, simulated yel-low bone scales, 4-1/8” closed, boxed

RUK0046: 2 blade trapper, simulated deer horn scales, 4-1/8” closed RUK0046-CS: as above in clamshell packaging.

RUK0063: 3 blade stockman, simulated deerhorn scales, 2-3/4” closed RUK0063-CS:as above in clamshell packaging.

A complete selection of handcrafted pocket knives featuring 1, 2 and 3 blade slip joint designs, razorsharp 440A stainless steel blades, nickel silver bolsters, brass liners and pins, Pakkawood, Jigged Bone orDelrin® simulated deer horn or yellow bone scales. Boxed or clamshell packaging. Lifetime Warranty.

RUK0072: 3 blade stockman, simulated deerhorn scales, 3-5/16” closed RUK0072-CS:as above in clamshell packaging.

RUK0064: 3 blade stockman, simulated deerhorn scales, 4” closed RUK0064-CS: asabove in clamshell packaging.

RUK0065: 3 blade stockman, pakkawoodscales, 4” closed RUK0065-CS: as above inclamshell packaging.

RUK0071: 3 blade stockman, pakkawoodscales, 3-5/16” closed RUK0071-CS: asabove in clamshell packaging.

RUK0066: 3 blade stockman, pakkawoodscales, 2-3/4” closed RUK0066-CS: asabove in clamshell packaging.

RUK0067: 2 blade muskrat, pakkawoodscales, 2-3/4” closed RUK0067-CS: asabove in clamshell packaging.

RUK0069: 2 blade jack, pakkawood scales,3-5/16” closed RUK0069-CS: as above inclamshell packaging.

RUK0068: 1 blade pocket, pakkawoodscales, 2-3/4” closed RUK0068-CS: asabove in clamshell packaging.

RUK0047: 3 blade cattleman, jigged bonescales, leather punch, 3-9/16” closedRUK0047-CS: as above in clamshell pack-aging.

CLASSIC POCKET KNIVES

PAGE22

PAGE23

FOLDING KNIVES

RUK0056: linen Micarta handle folding knife, 420A stainless steelblade, thumb stud, locking liner design, blade: 2-1/4”closed: 3-1/8”

K5017-BX: 17-function swiss-style knife, red ABS scales, 420Astainless, closed: 3-1/2"

K5011S-BX: brushed stainlesssteel 11-function swiss-styleknife, 420A, closed: 3-1/2"

RK7173TS: nylon handle folding knife, 420A stainless steel blade,lockback design, metal pocket clip, ambidextrous thumb stud, sup-plied with counter merchandiser display, blade: 2-1/2” closed: 4”

RK7032: nylon handle key chain folding knife, 420A stainless steelblade, lockback design, ambidextrous thumb stud, supplied withcounter merchandiser display, blade: 1-7/8” closed: 2-1/2”

RUK0035: gentfolding knife, 420Astainless steelblade and handle,lockback design,supplied with nylonsheath, blade: 2”closed: 3”

RUK0073: gentfolding knife, 420Astainless steelblade and handle,lockback design,supplied with nylonsheath, blade: 2”closed: 3”RUK0073-LE: asabove with highquality customlogo engravingon handle.

Supplied with 12 pccounter display carton

RK7173TS-LE: for your promotional programs, customize your knifewith your store or corporate logo in high quality laser engraving.Minimum order quantity applies. Contact us for details.

Supplied with 48 pccounter display carton

RUK0035-LE: for your promotional programs, customize your knifewith your store or corporate logo in high quality laser engraving.Minimum order quantity applies. Contact us for details.

RUK0171: G10 handle gent folding knife, 440A stainless steel, lockingliner design, thumb stud opening, reversible low profile pocket clip,blade: 2-1/4” closed: 3” RUK0171-CS: as above clamshell packaging

PAGE24

FOLDING KNIVES

RUK0177DA: laser engraved damascus pattern folding knife; razor sharp 8Cr13M0V stainless steel; stone washed finished handle and blade;frame lock design; ambidextrous thumb stud opening, low profile pocket clip, boxed, blade: 3.25” closed: 4.5”RUK0177DA-CS: as above clamshell packaging

GENT SERIES:precision made gentpocket knives featuring all stainlesssteel construction, 440A stainless steelblade, slimline frame lock design, finger nailnotch opening, low profile pocket clip, your choiceof inlays, boxed blade: 2-1/4" closed: 3"

RUK0176PO:mirror polishedstainless steel folding knife,textured electroplated spark finish,razor sharp 8Cr13MoV stainless steel,locking liner design, ambidextrous thumb studopening, low profile pocket clip, boxed, blade: 3” closed: 4”RUK0176PO-CS: as above clamshell packaging

RUK0170CF: carbon fiber acrylic inlay

RUK0170TQ: turquoise jade acrylic inlay

RUK0170WP: white pearl acrylic inlay

RUK0170G1: G10 inlay

RUK0170WD: pakkawood inlay

FOLDING KNIVES

PAGE25

K7185: rubber scale folding knife, stainless steel handle, decorative scrolldesign on bolsters, 420J2 stainless steel blade, lockback designblade: 3-1/2” closed: 4-1/2”

NC18: genuine deer horn handle folding knife, brass bolsters, 440Astainless steel blade, lockback design, presentation box,blade: 2-1/2”

NC18-BMOP: simulated black mother-of-pearl folding knife, brass bol-sters, 440A stainless steel blade, lockback design, presentation box,blade: 2-1/2” closed: 3”

RUK0029: pakkawood scale folding knife, stainless steel handle, 440Abead blast finish stainless steel blade, locking liner design, metal thumbstud and pocket clip, blade: 3-1/4” closed: 4-1/2”

RUK0030: pakkawood scale folding knife, stainless steel handle, 440Abead blast finish stainless steel blade, locking liner design, metal thumbstud and pocket clip, blade: 3-1/4” closed: 4-1/2”

RUK0032: utility foldingknife, brushed stainlesssteel handle, 420A stain-less steel easy-open blade,steel pocket clip, lock backdesign, boxed blade: 2-1/2”closed: 4”RUK0032-CS: as aboveclamshell packagingRUK0032P: as abovewith plain blade, boxed

LK52274: vented folding knife,brushed aluminum handle, 420Astainless steel blade, metalthumb stud and pocket clip,locking liner design,blade: 2-3/4” closed: 4”LK52274-CS: as aboveclamshell packaging

RUK0032-LE: for your promotional programs, customize your knifewith your store or corporate logo in high quality laser engraving.Minimum order quantity applies. Contact us for details.

K7273SRAC: rubber scale insert folding knife, brushed stainlesssteel handle, 420J2 50/50 serrated stainless steel blade, lockingliner design, metal thumb stud and pocket clip, blade: 3” closed: 4”

K7181: nylon scale insert folding knife, stainless steel handle andbolsters, 420J2 stainless steel blade, lockback design blade: 3”closed: 4”

SOG1N: 2-position web ny-lon sheaths for foldingknives and multi-tools, canbe worn vertically or hori-zontally, 2” belt loops, hookand loop flap closure, fits 3”closed length, suppliedwith hang card headerSOG2N: as above, fits 4”closed length

TORX SET AND SHEATHS

PAGE26

TORXSET: easy to use pocket sized TORX bit kit for adjusting and maintaining your folding knife from pivotpins to pocket clip screws, nylon case with pocket clip doubles as the handle for the magnetic tool bitconnector, includes T15, T10, T9, T8, T7 and T6 bits.

NYLON & LEATHER SHEATHS SOG3L: full grain leather sheath for foldingknives and multi-tools, button snap closure, 2”belt loop, black, fits knives up to 5” closed,polybagged

8001: full grainleather sheath forgent folding knives, button snap clo-sure, 2” belt loop,black, fits knivesup to 2.5” closed,polybagged

8014: full grain leathersheath for gent foldingknives , button snap clo-sure, 2” belt loop, tan, fitsknives up to 3” closed,polybagged

RUK0027: G10 handle folding knife, 440A bead blast stainless steelblade, locking liner design, metal thumb stud and pocket clip,blade:3-1/2” closed: 4-1/2”

K7099A: nylon handle folding knife, 420A stainless steel, 50/50 serrratedblade, lockback design, ambidextrous thumb stud, pocket clip,blade: 3-1/2” closed: 4-1/2”

TACTICAL FOLDING KNIVES

PAGE27

RUK0051Y: linen Micarta scale folding knife, matte finish stainless steelhandle and blade, 420A stainless steel, metal thumb stud and pocketclip, locking liner design, blade: 3-1/8” closed: 4-1/2”

RUK0058: G10 handle folding knife, 420A stainless steel bead blast tantoblade, metal thumb stud and pocket clip, locking liner design,blade: 3-1/2” closed: 4-3/4”

JY6005: nylon handle fold-ing knife, 440A stainlesssteel blade, lockback de-sign, metal thumbstud,pocket clip, blade: 3”closed: 3-1/4”

JY6007: nylon handle folding knife, 440A stainless steel blade, lockbackdesign, thumb stud, pocket clip, blade: 3” closed: 3-1/4”

S-002B: Black rubberized aluminum/zinc alloy handle folding knife, 440Aoxide treated stainless blade, 50/50 serrated, locking liner design, ambi-dextrous thumb stud and low profile pocket clip, built-in non-glare redLED light, blade: 3-1/8” closed: 4” S-002B-CS: as above in clamshellpackaging

RUK0125: G10 handle folding knife, 440A stainless blade, lockback de-sign, easy-open thumb hole and low profile pocket clip, blade: 3”closed: 4”

K7005: brushed aluminum handle folding knife, 420A stainless blade,liner lock design, ambidextrous thumb stud, key chain, built-in non-glarered LED light, blade: 1-3/4” closed: 2-1/2”

RUK0149B: Black anodized T6-6061 aluminum handle folding knife,locking liner design, 440A oxide finish stainless steel, ambidex-trous thumb stud, low profile reversible pocket clip, blade: 3” closed:4”, boxed

RUK0119: G10/stainless steel handle folding knife, 440A oxide treated50/50 serrrated blade, locking liner design, ambidextrous thumb studand low profile pocket clip, blade: 3-1/2” closed: 4-7/8” RUK0119-CS:as above in clamshell packaging

TACTICAL FOLDING KNIVES

PAGE28

RUK0120: G10/stainless steel handle rescue folding knife, 440A oxide treated blade, locking liner design, ambidextrous thumb stud andlow profile pocket clip, seat belt cutting blade, window breaker tip, blade: 3-3/8” closed: 4-3/4” RUK0120-CS: as above in clamshellpackaging

RUK0121: G10/stainless steel handle folding knife, 440A oxide treated50/50 serrrated blade, locking liner design, flipper guard, ambidextrousthumb stud and low profile pocket clip, blade: 3-1/4” closed: 4-1/2”RUK0121-CS: as above in clamshell packaging

RUK0122: Titanium coated stainless steel folding knife, 440A 50/50serrrated blade, locking liner design, ambidextrous thumb stud and lowprofile pocket clip, blade: 3” closed: 4-1/8”RUK0122-CS: as above in clamshell packaging

RUK0108: linen Micarta scale folding knife, stainless steel handle,440A stainless steel bead blast blade, metal thumb stud and pocketclip, locking liner design, blade: 3-1/4” closed: 4”

RUK0127: locking liner folding knife; 440A stainless distressed oxidefinished drop point blade with ambidextrous thumb stud opening; CNCmachined anodized aluminum handle with G10 scale insert; low profilepocket clip; boxed, blade: 3.25” closed length: 4-3/8”

TACTICAL FOLDING KNIVES

PAGE29

RCOMBO6-CS: gent and tactical locking liner folder set featuring 440A oxide finish stainless steel blades (3” partial serrated & 2-1/4” fine edge); CNC machined powder coated anodized T6-6061 aircraft aluminum handles; non-slip rubberized coating (tactical);low profile pocket clips; gold finish ambidextrous thumb stud opening; lanyard loop, clamshell packaging, closed length: tactical(4”) gent (3”)

SOCIUS ®

Ball Bearing

Pivot System

SOCIUS® : pronounced \so-she-us\ or latin for “companion” - locking liner folder features our new super smooth ball bearing pivotopening mechanism (you won’t believe it’s not spring assisted); razor sharp 7CR17MoV (HRC 56-58) Titanium Nitride coated blade withflipper guard and thumb rest; your choice of fine edge or partial serration in 3" or 3-3/4" length blades; CNC machined diamondcheckered G10 handle with lanyard loop for a secure grip; thumb hole opening and reversible low-rise pocket clip for right or left handeduse; choose between 4" or 5" closed formats as suited to your needs. 3.22 oz and 5.78 oz

RUK0172: fine edge 3” bladeRUK0172S: 1/3” serrated 3” bladeRUK0173: fine edge 3-3/4” bladeRUK0173S: 1/3” serrated 3-3/4” blade

SHARK ® LEVER ACTION KNIVES

PAGE30

Designed by George Sessions, the RUKO SHARK ®®®®® features a super smooth lever action opening systemfor rapid one handed blade deployment; frame lock design; 420A stainless steel frames and components;razor sharp 440A stainless clip or drop point blades and low profile pocket clips for easy carry.

Lever button for quickdeployment

Low profilepocket clip

Frame lockdesign

Ultra slim profilefor easy carry

Easy to open design - just pull back onthe lever button

1

2

3

4

RUK0085: grey linen Micarta handle scale, blade: 3” closed: 4-5/8”

RUK0086: red Pakkawood handle scale, blade: 3” closed: 4-5/8”

RUK0088: rubberized WX-3D™ camouflage frame and handle scale, oxidefinish blade, blade: 3” closed: 4-5/8”

RUK0087: oxide finish blade and frame, G10 handle scale, blade: 3”closed: 4-5/8”

RUK0087S: oxide finish blade and frame, G10 handle scale, blade: 3”closed: 4-5/8”

SHARK ® ASSISTED OPENING KNIVESRUKO ®®®®® SHARK ® ® ® ® ® asisted opening knives features lightning quick spring steel liner opening system(S.R.D.S) for rapid one handed blade deployment; manual thumb slide blade lock with ball bearing detentsecurely retains blade in closed position for safe carry; available in a variety finishes and patterns for yourchosen field of use; standard specifications include 440A oxide finish stainless steel, CNC machined T6-6061 aircraft aluminum handles, ambidextrous thumb studs, locking liner design, oxide finish low profilereversible pocket clips (selected models) - covered by our Lifetime Warranty.

RUK0141: silver anodized handle, blade: 2-1/2” closed: 3-1/2”, boxed

RUK0142: silver anodized handle with genuine carbon fiber inserts,blade: 3-1/4” closed: 4-1/2”, boxed RUK0142-CS: as above clamshellpackaging

RUK0143: WX-3D® camouflage handle, non-slip rubberized diamondpattern texture, blade: 3-1/4” closed: 4-1/2”, boxedRUK0143-CS: as above clamshell packaging

RUK0143B: matte black handle, non-slip rubberized diamond patterntexture, blade: 3-1/4” closed: 4-1/2”, boxedRUK0143B-CS: as above clamshell packaging

reversible pocket clip

reversible pocket clip

low profile pocket clip

blade lock

RUK0142S: 50/50 serrated blade, silver anodized handle with genuinecarbon fiber insert blade: 3-1/4” closed: 4-1/2”, boxed

blade lock

blade lock

RUK0149RTA: rainbow titanium accented stainless steel handle, re-versible pocket clip, blade lock, blade: 3” closed: 4”, boxed

reversible pocket clip

reversible pocket clipblade lock

blade lock

reversible pocket clip blade lock

PAGE31

PAGE32

SHARK ® ASSISTED OPENING KNIVES

RUK0174GY: distressed oxide finish handle and blade, 440A fineedge drop point blade, locking liner, reversible low profile pocketclip, blade lock, blade: 1-7/8” closed: 3-1/8” boxed RUK0174GY-CS:as above clamshell RUK0174CA: as above WX-3D® camouflagefinished handle with rubberized coating RUK0174CA-CS: as aboveclamshell packaging

RUK0175CA: WX-3D® camouflage finished handle with rubberizedcoating, 440A fine edge oxide finish drop point blade, locking liner,reversible pocket clip, blade lock, blade: 2-3/4” closed: 4”RUK0175CA-CS: as above clamshell RUK0175GYS: as above dis-tressed oxide finish handle and partial serrated bladeRUK0175GYS-CS: as above, clamshell packaging

RUK0148B: CNC machined black G10 handle, fine edge oxide finishdrop point blade, locking liner, low profile reversible pocket clip, bladelock, blade: 3” closed: 4-1/2”, boxedRUK0148B-CS: as above clamshell packagingRUK0148BS-CS: as above partial serrated blade, boxed packagingRUK0148BS-CS: as above partial serrated blade, clamshell packaging

RUK0178SHG: oversized CNC machined black G10 handle, partialserration drop point blade, locking liner design, reversible pocketclip,seat belt cutter and tungsten steel window punch, blade: 4”closed: 5-3/4”, boxedRUK0178SHG-CS: as above clamshell packaging

RUK0178SBK: oversized CNC machined black G10 handle, partialserration drop point blade, locking liner design, reversible pocketclip, seat belt cutter and tungsten steel window punch, blade: 4” closed: 5-3/4”, boxed RUK0178SBK-CS: as above clamshell packaging

RCOMBO7-CS: REEF-I and REEF-IIassisted open folding knife set dis-tressed oxide finish handle and blade,440A stainles, clamshell packaging

RUK0145SA: CNC machined G10 handle, 440A 50/50 serrated spearpoint blade, low profile reversible pocket clip, blade: 3-3/8” closed:4-1/2”, boxed RUK0145SA-CS: as above clamshell packagingRUK0145A: as above plain edge, boxed

PAGE33

SHARK ® ASSISTED OPENING KNIVES

RUK0153: 420A stainless oxide finish, rubberized black anodized alu-minum handle, 1/3 serrated blade, electroplated locking liner, rug-ged pocket clip, widow punch, blade: 3-1/2” closed: 4-1/2” boxedRUK0153HG: as above safety green handle, boxedRUK0153-CS: black, clamshell packagingRUK0153HG-CS: safety green, clamshell packaging

RUK0146A: rubberized black anodized aluminum/G10 insert handle,440A plain blade, reversible pocket clip, blade: 3-3/8” closed: 4-1/2”,boxed RUK0146SA: as above 50/50 serrated, boxed RUK0146SA-CS: as above 50/50 serrated, clamshell packaging

RUK0152SA: CNC machined G10 handle, 440A 50/50 serrated tantopoint blade, low profile reversible pocket clip, blade: 3-3/8” closed:4-1/2”, boxed RUK0152SA-CS: as above clamshell packaging

RUK0144SCA: rubberized WX-3D ® camouflage handle, non-slip dia-mond texturing, 440A 50/50 serrated bladeseat belt cutter, windowpunch, blade: 3-1/4” closed: 4-1/2”, boxedRUK0144SCA-CS: as above clamshell packaging

reversible pocket clip blade lock

reversible pocket clip blade lockreversible pocket clip

pocket clip

blade lock

RUK0144S: rubberized black handle, non-slip texturing, 440A 50/50serrated blade, seat belt cutter, window punch, blade: 3-1/4” closed:4-1/2”, boxed RUK0144SHG: as above safety green handle, boxedRUK0144S-CS: black, clamshell packagingRUK0144SHG-CS: safety green, clamshell packaging

low profile pocket clipblade lock

low profile pocket clipblade lock

Our latest line of tactical knives featuring razor sharp 440A stainless steel blades with black tita-nium nitride finish for stealth and superior performance; ballistic nylon and glass reinforced nylonsheaths; locking liner design with low rise pocket clips; all covered under our Lifetime Warranty.

Ti-TACTICAL®®®®®SERIES

RUK0097L: full tang boot knife, hefty 4mm thick black titanium ni-tride coated 1/3 serrated spear point blade; glass reinforced nylonhandle with non-slip rubber edges; glass reinforced nylon sheathwith reversible metal boot clip; blade: 4” overall: 8” boxedRUK0097L-CS: as above clamshell packagingRUK0098L: as above modified tanto blade, boxedRUK0098L-CS: as above clamshell packaging

RUK0097: full tang neck/boot knife, black titanium nitride coated 1/3serrated spear point blade; glass reinforced nylon handle with non-slip rubber edges; glass reinforced nylon sheath with reversiblemetal boot clip; black oxide finish copper neck chain; blade: 3” over-all: 6-3/8” boxedRUK0097-CS: as above clamshell packagingRUK0098: as above modified tanto blade, boxedRUK0098-CS: as above clamshell packaging

RUK0162: locking liner folding knife, 50/50 serrated drop point blade;black titanium nitride coated blade and vented handle, ambidextrousthumb studs; reversible low rise pocket clip, blade: 2-1/2” closed: 3”boxed RUK0162-CS: as above clamshell packaging

RUK0160: locking liner folding knife, 50/50 serrated black titanium ni-tride coated tanto point blade; anodized aluminum handle with fine check-ering and non-slip rubber coating, ambidextrous thumb studs; revers-ible low rise pocket clip, blade: 3-1/2” closed: 4-3/4” boxedRUK0160-CS: as above clamshell packaging

PAGE34

RUK0165: locking liner rescue folding knife, black titanium nitride coated50/50 serrated drop point blade and vented handle; ambidextrous thumbstuds; window punch and seat belt cutting blade; reversible low rise pocket clip, blade: 3-3/8” closed: 4-3/4” boxed RUK0165-CS: as above clamshell packaging

SURVIVAL KNIVES & AXES

RUK0161B: 7Cr17MoV titanium nitride finish tactical knife with serrated/saw back blade; 4.5 mm full tang blank; molded GFR nylon/rubber handlewith metal pommel cap; molded nylon GFR sheath with integrated diamond sharpening stone and 1680D Molle compatible backer,boxed, blade: 4-3/4” overall length: 10-1/2” RUK0161B-CS: as above clamshell packaging

RUK0163: 420J2 oxide finish survival knife with ATB saw back bladeand ABS handle with ball compass pommel; handle compartmentcontains: wire saw & magnesium ferrite firestarter; 1680D nylonsheath with sharpening stone, boxed, blade: 6” overall length: 11.75”RUK0163-CS: as above clamshell packaging

RUK0099: survival knife, 440A stainless black titanium nitride coatedATB saw back blade; 3.5mm rat tail tang blank; non-slip glass fiberreinforced nylon and rubber handle; GFR nylon sheath with web ny-lon frog and hook & loop straps, D-ring ; blade: 6-1/4” overall length:11-1/2” boxed RUK0099-CS: as above clamshell packaging

RUK0164B: tactical throwing tomahawk, CNC 1055 oxide finish car-bon steel head with spike; molded TPR handle; GFR nylon sheathwith belt loop, boxed, weight: 20 oz. blade: 6-1/2” overall length: 11-1/2”

RUK0166B: tactical axe, cast 2CR13 oxide finish stainless steelhead with spike and hammer plate; triple pinned tang with metalcollar & spiked pommel; GFR nylon handle w/550D nylon paracord;GFR nylon sheath with belt loop, boxed, weight: 33 oz. blade: 7-1/2”overall length: 15”

PAGE35

G-013: 420J2 stain-less steel doubleedge boot knife, non-slip textured rubberhandle, ballistic nylonmetal boot clipsheath, full tang de-sign, blade: 4-1/2”overall: 8-3/4

PAGE36

NECK & BOOT KNIVES

G-20NB: 420J2stainless steeldouble edgeboot knife, matteblack blade,non-slip powderc o a t e daluminum han-dle, ballistic ny-lon metal bootclip sheath,blade: 4-3/4”overall: 8-3/4”

G-21NB: 420J2stainless steel doubleedge boot knife,matte black blade,non-slip powdercoated aluminumhandle, ballistic nylonmetal boot clipsheath, blade: 3-1/2”overall: 6-7/8”

MK-12: 420A stainless steel boot knife with powder coated finish zamakhandle and leather boot clip sheath, clip point, blade: 4-3/4”overall: 8-5/8”

K2000A: Hawkerboot/neck knife, AUS-6 stainless steel clippoint 50/50 serratedblade, bead blastfinish, 2 position Zytelself-locking boot clipsheath, lanyard,blade: 2-1/2" closed:5-1/4"K2000A-CS: asabove, titaniumnitride finish, 440A,clamshell packaging

K9341: 420J2 stain-less steel double edgeboot knife, partial ser-ration, non-slip rubberhandle, ballistic nylonsheath with hook andloop adjustable legstraps, full tang de-sign, blade: 3-1/2”overall: 7-1/2”

MK-13: 420A stainless steel boot knife with powder coated finish zamakhandle and leather boot clip sheath, tanto point, blade: 5-1/8” overall: 9”

K2000: Hawker boot/neck knife, AUS-6stainless steel clippoint plain blade,bead blast finish, 2position Zytel self-locking boot clipsheath, lanyard, blade: 2-1/2" closed: 5-1/4"

K9807: 420J2 stainless steel WWII paratrooper knife, blade: 5-3/8”closed: 7” open: 9-1/2” K9806: as above without saw back serrationsblade: 3-1/4” closed: 5” open: 6-7/8”

BOOT, SURVIVAL & DIVE KNIVES

PAGE37

K1061A: Marine Corp style combat knife, matte black S45C carbonsteel blade w/vent, molded rubber handle, ABS sheath, blade: 6-3/4"overall: 12"

G-216AR: 420J2 stainless steelknife with compass cap, fish hooks, wire saw, honing stone, matchesand simulated leather sheath, blade: 9" overall: 14-1/2"

K2005: Survival kit knife, 420J2 stainless steel 1/4" thick blade withdual saw back pattern, heavy duty nylon sheath w/compass, sharpen-ing stone, emergency capsule in handle (fish hooks, matches, wire saw,twine) blade: 7-1/2" overall: 14-1/2"

G-32B: 420J2 stainless blade skeleton handle boot knife, non-reflec-tive finish, nylon sheath with insert and metal boot clip,blade: 4-1/8” overall: 8-11/16”

RUK0034: ABS handlefruit sampling knife,420A stainless steel,brass liners, nylonsheath, blade: 4-1/4”closed: 5-3/4”

MACHETES, SAWS, AXES & WORK KNIVES

PAGE38

K4222: deluxe rubber handle droppoint machete, S45C high carbonstainless steel blade, simulatedleather sheath, blade: 12-3/4”closed: 18”

K4115: high carbon steel machete,nylon pinned handle, Saw back blade, cotton canvas sheath, blade: 18” overall: 23”

F292/1: 430 stainlesssteel handle fruit sam-pling knife, 420C stain-less steel blade HRC 52-54, made in Italy, blade:4-1/2” closed: 5-1/2”

RUK0084-CS: rubberized nylon handle folding saw, M65 spring steel,pivot pin blade locking mechanism, blade: 6-1/2” closed: 8-3/4”RUK0084-BX: as above boxed packaging

RUK0111S: Dual locking linerutility folding knife, 2-1/2” 50/50serrated 420A stainless steelblade and replaceable utilityblade, anodized silver aluminumhandle, non-slip diamond platefinish, 2-position ballistic nylonsheath with utility blade pouch,stainless steel pocket clip, sup-plied with 10 extra utility bladeinserts, blade: 2-1/2”closed: 4”, boxed

TK06ALX: 420J2stainless steelthrowing knife,double edge,PVC sheath,overall length: 12”

THROWING KNIVES

PAGE39

K3422 SERIES:professional throw-ing knives, 420J2stainless steel,single edge, nylonsheath, available in-dividually or assets.

K3422CS:3 pc. set6” overall

K3422S:1 pc. set6” overall

G-303: set of 3 pc S45Ccarbon steel throwingknives, double edge, PVCsheath, overall length: 7”

G-312S: professionalthrowing knife, S45Ccarbon steel, doubleedge,nylon sheath,overall length: 8-1/2”G-312L: as aboveoverall length: 10-1/2”

K3420: set of 2 throwingknives, 420J2 stainlesssteel, double edge, nylonsheath, overall lengths:9-3/4” and 8-1/4”

TK06B: S45C carbonsteel throwing knife,double edge point,textured handle forsecure grip, non-re-flective finish, PVCsheath,overall length: 9-1/2”

PRO 80L-14:p r o f e s s i o n a lthrowing knife,420HC stainlesssteel, doubleedge, leathersheath, Made inSpain, overalllength: 10”

Designed by International Knife Throwing Champion, Pierre Cazoulat, we would like to introduce LE SPHINX. This is a factory reproduction ofPierre’s throwing companion with which he has won many throwing knife titles including the following:2011 IKTHOF CONVENTIONAL THROWING WORLD CHAMPION (combined 2,3,4,5,6 meters)2012 IKTHOF WORLD CHAMPION LONG DISTANCE KNIVES (67 feet 7 inches)2012 FRENCH CHAMPION KNIVES (combined 3,5 and 7 meters)2013 FRENCH CHAMPION KNIVES (combined 3,5 and 7 meters)2013 WINNER - TRISKELL CHALLENGE (precision throwing with qualifying rounds)2013 WINNER - JAMES COBURN CHALLENGE (fast draw)

PIERRE CAZOULAT THROWING KNIVES

At 425 grams and 49 mm wide - Le Sphinx are legal for use in any recognized international throwing knife competition. 420J2 stainlesssteel; hand polished rolled edges; genuine leather strap handle with solid brass rivets affords a throwing knife with superior balance andfinish. Supplied with 1680D nylon sheath with front file/accessory pocket and 550D paracord leg strap for secure carry. Boxed packaging. Overall length: 13-5/8” Weight: 425 grams (each). SPHINX-3N: 3 pc set SPHINX-1N: 1 pc set SPHINX-PARTS: replacement handle kit includes set of 3 rivets and 2 handle straps, polybaggedPAGE40

A complete assortment of throwing knives in single and triple sets featuring superior balance,S45C carbon steel and 420J2 stainless steel from 2.5mm to 5.75mm rolled steel stock, non-reflective blade coating, ballistic web nylon sheaths.

EOD-THROWERS ®

TK06AB: double edge spear point throwing knife, 420J2 stainless 3mmrolled steel stock, overall length: 9”, boxed TK06AB-CS: as aboveclamshell packaging TK06A3B: as above 3 pc set, boxedTK06A3B-CS: as above 3 pc set, clamshell packaging

K3422CSB: 3 pc single edge drop point throwing knife set, 420J2 stain-less 3mm rolled steel stock, overall length: 6”, boxed K3422CSB-CS:as above clamshell packaging K3422M3B: as above 3 pc set, 4mmrolled steel stock, overall length: 8-1/2”, boxed K3422M3B-CS: as above3 pc set, clamshell packaging PAGE

41

G-312SB: double edgespear point throwing knife,420J2 stainless 5.75mmrolled steel stock, overalllength: 8-1/2”, boxedG-312SB-CS: as aboveclamshell packaging

G-303B: 3 pc double edge spear point throwing knife set, S45Ccarbon 2.5mm rolled steel stock, overall length: 7-3/8”, boxedG-303B-CS: as above clamshell packaging

ARKANSAS WHETSTONES & ACCESSORIES

PAGE42

SMT4 W/OIL: 4”x1-5/8”x1/2” soft natural Arkan-sas washita stone (medium) with tupelo woodbase, supplied with 1 oz. bottle honing oil

SK-KIT: deluxe honing kit with 4”X1”X1/2” soft (medium) and 3”X1”X1/4” hard (fine) natural Arkansas washita stones, includes 3 oz. bottlehoning oil, supplied with tupelo wood box and sharpening instructions

TRI-6: triangular 3-stonesharpening system with tupelo woodbase, 6”x1-5/8”x1/2” stones (fine, medium,coarse) supplied with 1 oz. bottle honing oil

Handcrafted with pride in the USA ourwhetstones feature quarried novaculite

and silcone carbide housed in handhoned Tupelo wood boxes and bases

PAGE43

RUK0045-CS: Diamond sharpening stone withnylon pouch, 3” x 1” design, fish hook sharp-ening groove, 325 grit, clamshell package.

RUK0043-CS: Diamond sharpening bench stone with handguard, 6” x 2” double-sided stone with 325 grit (medium) and600 grit (fine), durable ABS construction with table top pads,clamshell package.

RUK0040-CS: Diamond sharpening pen, 4”retractable sharpening rod with rounded and flatedge including fish hook/serrated edge groove,400 grit, clamshell package.

DIAMOND & CARBIDE SHARPENERS

RUK0112-CS:Safe-Sharp® doublecarbide sharpener, features2 sets of blades for knives and scissors/shears,hand guard, durable thermoplastic handle, blazeorange, clamshell packaging

RUK0114-CS: Safe-Sharp® carbide blade andceramic rod pocket sharpener; safety orangeGFR molded nylon housing; integrated emer-gency high pitch whistle; lanyard loop,clamshell packaging, length: 3.5” width: 7/8”height: 1/2”

Top quality handcuffs built to meet or exceed NIJ Standard-0307.01 using perfect fine blankingprocess that results in exceptional tolerances; heat treated for added strength and durability; doublelock mechanism; 20 locking positions; 2 pawl; supplied with 2 standard keys. Lifetime Warranty.

NIJ APPROVED HANDCUFFS

MODEL: G-222SSTYLE: chain linkWEIGHT: 9.45 ozWRIST OPENING: 2.0”MATERIAL: 420J2 stainless steelJAW THICKNESS: 3.5 mmCHEEK PLATE THICKNESS: 2.5 mmMAXIMUM OVERALL LENGTH: 9.0“FIRST NOTCH INSIDE PERIMETER: 8.3”LAST NOTCH INSIDE PERIMETER: 5.9”

PAGE44

MODEL: G-222LSTYLE: chain linkWEIGHT: 11.6 ozWRIST OPENING: 2.2”MATERIAL: 420J2 stainless steelJAW THICKNESS: 3.5 mmCHEEK PLATE THICKNESS: 2.5 mmMAXIMUM OVERALL LENGTH: 9.4“FIRST NOTCH INSIDE PERIMETER: 8.8”LAST NOTCH INSIDE PERIMETER: 6.3”

MODEL: G-222H2STYLE: double hingedWEIGHT: 12.1 ozWRIST OPENING: 2.2”MATERIAL: 420J2 stainless steelJAW THICKNESS: 3.5 mmCHEEK PLATE THICKNESS: 2.5 mmMAXIMUM OVERALL LENGTH: 8.3“FIRST NOTCH INSIDE PERIMETER: 8.8”LAST NOTCH INSIDE PERIMETER: 6.3”

MODEL: G-222H3STYLE: triple hingedWEIGHT: 12.1 ozWRIST OPENING: 2.2”MATERIAL: 420J2 stainless steelJAW THICKNESS: 3.5 mmCHEEK PLATE THICKNESS: 2.5 mmMAXIMUM OVERALL LENGTH: 8.7“FIRST NOTCH INSIDE PERIMETER: 8.8”LAST NOTCH INSIDE PERIMETER: 6.3”

NIJAPPROVED NIJ

APPROVED

NIJAPPROVED NIJ

APPROVED

MODEL: G-222F (nickel plated)MODEL: G-222FB (black oxide)STYLE: chain linkWEIGHT: 8.8 ozWRIST OPENING: 2.0”MATERIAL: carbon steelJAW THICKNESS: 2.8 mmCHEEK PLATE THICKNESS: 2.2 mmMAXIMUM OVERALL LENGTH: 9.0“ FIRST NOTCH INSIDE PERIMETER: 8.3” LAST NOTCH INSIDE PERIMETER: 5.9”

MODEL: G-222ESTYLE: chain linkWEIGHT: 9.0 ozWRIST OPENING: 2.0”MATERIAL: 430 stainless steelJAW THICKNESS: 3.5 mmCHEEK PLATE THICKNESS: 2.5 mmMAXIMUM OVERALL LENGTH: 9.0“FIRST NOTCH INSIDE PERIMETER: 8.3”LAST NOTCH INSIDE PERIMETER: 5.9”

G-222D: double locknickel plated thumbcuffs, hardened steel.

K4002: side-handle baton styleuniversal handcuffkey, fits S&W andall RUKO models

SECURITY ITEMS

K4434BL: machined alumi-num straight kubaton, key ring,black anodized, overall: 5-1/2”K4434SR: as above brushedfinish

G-222A: pro-motional singlelock handcuffsG-222AB: asabove matteblack finish.

K4003: universal hand-cuff key for double lockhandcuffs, fits S&W andall RUKO models

K4435BL: machinedaluminum finger groovekubaton, key ring, black,overall: 5-1/2”K4435SR: as above insilver finish

K4438BL: machinedaluminum taperedkubaton, key ringblack,overall: 5-1/2”K4438SR: as above inbrushed finish

EXPANDABLE BATONS:* STKM11A carbon steel tubing* Tensile Strength: 1090 kgf (2398 lbf)* Bending Strength: 780 kgf (1716 lbf)* Hardness: HRC15-16* Handle Grip: TPE Rubber* Ballistic web nylon holster

NS-16: 16” extended lengthNS-21: 21” extended lengthNS-26: 26” extended length

PAGE45

PAGE46

COMPASSES & TRAVEL ACCESSORIES

R27N: Pin-on style liquid-filled ball compass,blister packaging R27N-B: as above boxedpackaging

CD-803L: liquid filled wrist compass with ad-justable hook & loop wrist band, blister pack-aging CD803L-B: as above boxed packaging

CD-507L: liquid filledteaching compass withABS lidded case, blisterpackaging CD507L-BX:as above boxed packag-ing

C-110: liquid filled map compass with lanyard,blister packaging C110-B: as above boxedpackaging

CD-201PL: liquid filledlensatic compass, ABSlidded case, directionalbezel ring, blister pack-aging CD201PL-B: asabove boxed packaging

C-112: WWI trenchcompass, liquid filledlensatic design, gold fin-ish metal lidded case,directional bezel ring,blister packaging C-112B: as above boxed packaging

C-105: GI marchingcompass, liquid filledlensatic design, ODgreen finish metal lid-ded case, phospho-rous bezel markings &sight posts, directionalbezel ring, blisterpackaging C-105B:as above boxed pack-aging

CD-301L: liquid filled pin-on style compass withmetal case, blister packaging CD301L-B: asabove boxed packaging

JL-12: Field Master Weatherproof Outdoor Tool, diecast solid zinc alloy housing,chrome plating serves as mirror, alcohol glass thermometer (both F and C scale)on reverse side, liquid filled compass, 4X magnifying glass, emergency whistle,press on red ultra bright LED light with lithium battery(included), all stainlessscrews, polycarbonateplastic casings withbuilt-in key ring hole

Top quality compassesfrom our Taiwan sources

ensure you receive a qual-ity product free of expan-sion bubbles due to cap-

sules leaking.Buy with confidence know-ing your RUKO product iscovered by our no hassleover-the-counter Lifetime

Warranty.

JL-04: rechargeable auto light, chargesthrough 12V accessory socket, flexible head,ABS housing, Krypton Bulb