SAW BLADES - Scott+Sargeant

PRODUCTS PAGE

Multi-Rip Saw Blades 9~11Building Contractors Saw Blades 11Universal Saw Blades 11~14Saw Blades for Melamine & Laminated 15~19Multi-Material Saw Blades 20-21DP Saw Blades & Scoring 22Scoring Saw Blades 23-24Panel Sizing Saw Blades 25Saw Blades for Aluminium & Non-Ferrous Materials 26-27Saw Blades for Metal & Special Materials 28-29ITK Plus® Saw Blades 30~32DP Saw Blades for Ultra-Hard Materials 33

Saw Blades for Portable Machines 33~35Contractor® Saw Blades 36Grooving Saw Blades 37~40Saw Blade Accessories 40Saw Blade Index 41~48Portable Machine Index 49-50

Saw BladeS

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com

www.scosarg.com6

CMT Orange Tools

DESIGNThe simplicity of a circular saw blade design is in reali-ty a complexity of technical considerations. Each blade has to make a certain type of cut, and this requires careful analysis of hook and grind angles, gullet designs, to location of sound dampening slots and the thickness of the blade - just to name a few. So in order for us to get the best design for our blades - and for you to get the best performance from them - we use the same method that we use to engineer our router bits: we combine the knowledgeable minds and experience of our technical department and the latest computer technology. The result is a superior blade that has some rather special “stand-ard” features:

Anti-vibration Design. The anti-vibration cuts in theblade do exactly what their name implies: they are theanti in anti-vibration. This translates into less chatteringduring cutting and consequently it lengthens the life ofthe blade. Anti-vibration also means a flawless cut, sostabilizers and scoring blades are no longer necessary.

Expansion Slots. These little hook-shaped cuts inthe blade help to reduce noise while regulating the expansion and contraction of the blade as it generates heat during cutting operations.

MATERIALSWhen it comes down to it, saw blades are much like rout-er bits - it’s just two components: steel and carbide. So in selecting the raw materials, we are every bit as picky with our saw blades as we are with our router bits. Besides, why mess with a winning formula like superior steel and tungsten carbide?

Steel. It’s the heart of the blade, so CMT uses only thefinest steel available: super 42-44 Rockwell hardness steel.

Carbide. The cutting tips of every CMT blade are made from the best grades of micrograin carbide.

MANUFACTURINGCMT saw blades are machined on automated CNC machines, from start to finish. The advanced technology and precision of these machines ensures uniform quality on every blade while giving us the possibility to carry out more efficient quality controls.

Laser Cutting. The steel plate of the blade is laser cut, NEVER die cut, from superior strength steel. This way of cutting steel is not only extremely precise but it makes it possible to cut harder strengths of steel and does not stress the plate while cutting, so the resulting blade is flat and true and more resistant to warping.

Grinding & Tensioning. After it has been cut, the blade is polished and tensioned, the evidence of which can be seen in the superior finish and a tension ring that are visible on the blade. Then the central bore is ground to a smooth finish so that the blade will fit pre-cisely on the saw arbor and will have perfect concen-tricity during rotation. The seats for the carbide teeth are also ground, making sure that the carbide tips fit perfectly, providing the right conditions for making a secure braze.

HOW WE PRODUCE OUR HIGH QUALITY BLADESCMT stands for quality, which means we put quality into everything we do. It only makes sense. At CMT we figure that if our router bits are going to be top quality, high-performance and orange, then our saw blades should be too. And to do that, we simply follow the same guidelines for our blades that we do for our bits: we start with a solid design, use only the best materials and manufacture with skill and care. And of course, make sure they are trademark orange.

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com

https://www.cmtorangetools.com/eu-en/

www.scosarg.com 7

Packaging & Instructions. CMT blades are packed and protected for shipping, display and storage in either a sturdy cardboard box or in a patented heavy duty HDPE plastic case that’s as dura-ble as our tools. Illustrated instructions for resharpening are included with your CMT blade so that you have all the details you need to keep the blade sharp, which will also help you extend the life of the blade.

CMT Orange Tools

Quality Control. We always manually check the quality of our blades at each step of the manufacturing process. However, now we also use a fully automatic measuring process that measures every dimension of the blades without actually coming into contact with it.

Silver-Copper-Silver Sandwich Brazing. Once again, experience has been a good teacher. Automated brazing with a special silver-copper-silver “sandwich” brazing compound yields excellent results and reduces the chanc-es of failed welds. In addition, this combination of metals is critical during brazing because as the steel body and the carbide tipped teeth are heated and cooled, they expand and contract at different rates. The copper layer acts as a buffer and keeps the carbide from cracking during cool down shrinkage. When woodworking, the copper provides flexibility and resistance to impact which in turn protects the carbide tips and steel shoulders when cutting through harder substances or knots in the wood.

Specially Formulated Carbide Tips. What is true for router bit carbide tips is also true for the carbide tips on saw blades: what’s good for one type of blade may not be good for another. At CMT, we have studied carbide formulas and their impact on blade performance and have developed specially formulated carbide tips to match each blade’s application. Larger blades require an extra-fine harder carbide that holds its edge and resharpens easily, while smaller blades need a special carbide that can withstand the occasional nail or imperfections that often occur in construction work. For each blade and each use, there is carbide made especially for it.

Sharpening & Laser Marking. The final step is sharpen-ing the micrograin carbide teeth. During the sharpening phase, each angle is ground to razor-sharp precision - down to the Milacron - on multi-axis CNC machines. We also laser mark our blades so you have all the details about the blade type and its uses, right there on the blade.

CMT ORANGE TOOLS. Manufacturers of high quality woodworking tools since 1962, we are still proud to put “Made in Italy” on all our orange tools.

CMT’s fully automatic measuring system.

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com


www.scosarg.com8

Maximizing Saw Performance

PERFORMANCE

285.096.12MØ 300 x 3,2/2,2 x 30

Z=96 ATB6400 MAX RPM

INDUSTRIAL FINE CUT-OFF

Made in European Union© C.M.T. UTENSILI S.P.A. ITALYWWW.scosargCOM

EN Heavy-duty laser cut HRC44 plateIndustrial Micro-grain carbide for long lifePrecision balanced to run truerVented plate reduces noise and vibration ES Cuerpo sierra en acero HRC44 cortado al láserMetal duro en micrograno para una larga duraciónPerfecto equilibrado para un resultado óptimoCuerpo sierra con ranuras de dilatación y de insonrización FR Le corps de lame en acier HRC44 découpé au laserCarbure micrograin pour une durée prolongéePlanage et tensionnage très précis pour un resultat optimalLe corps de lame avec fentes de dilatation anti-bruit IT Corpo lama in acciaio HRC44 tagliato al laserMetallo duro in micrograna per una lunga durataPerfetto bilanciamento per risultati di alta precisioneCorpo lama con tagli di espansione e di silenziatura

DE Kreissägeblatt aus HRC44 Stahl, Laser geschnittenFeinkristallines HartMetall für eine lange LebensdauerPerfekter Planlauf für hochpräzise ErgebnisseKreissägeblatt mit Laserornamenten zur Geräusch und Vibrationsreduktion PL Korpus wycinany laserowo ze stali HRC44 Zęby z mikro-ziarnistego węglika spiekanego podwyższające żywotnośćPrecyzyjnie zbalansowany korpus w celu zwiększenia jakości cięciaNacięcia wygłuszające i redukujące wibracje RU Корпус пилы вырезан лазером, провальцован для уменьшения биений, и закален до 44 HRC Специальные прорези в корпусе уменьшают шум и вибрациюУльтра мелкозернистый твердый сплав для увеличенного ресурса

Since 1962

BLADE RANGE ORANGE CHROME® INDUSTRIAL / XTREME ITK PLUS® CMT CONTRACTOR TOOLS®PERFORMANCE SUPERIOR ★★★★★ BEST ★★★★ BETTER ★★★ GOOD ★★

DESCRIPTION Designed for professional woodworkers who require high precision and durability from their saw blades. Special chrome carbide reduces tooth abrasion, whereas the chrome plated body protects against rust, corrosion and guarantees long-lasting performance.

Designed for fine woodworkers, finish carpenters, construction and industrial users who run their blades all day long demanding ultimate precision and extended life, while conquering the most challenging applications.

Designed for the professional contractor and remodeler, CMT’s ITK Plus® delivers a clean, fast, effortless cut through wood and wood composite material. The features of the ITK Plus® line offer great price-performance balance which means greater value.

Designed for the contractor and remodeler CMT’s Contractor® thin-kerf blade line delivers solid performance at a very economical price. Ideal for any construction projects that require cutting wood and wood composite material.

USER Professional Woodworker Professional Contractor & Remodeler Contractor & Remodeler

USAGE Run All Day Run All Day Daily Use Daily Use

PRICE POINT Premium Premium Mid Value

MATERIALS Wood, plywood, OSB, laminate, melamine, mouldings, MDF.

Wood, Wood with nails, Plywood, OSB, Laminate, Melamine, MDF, Non-Ferrous, Metals, Stainless Steel, Plastics, Fiberglass, Solid Surface.

Wood, Composite Decking, Plywood, OSB, Laminate, Melamine, MDF, Fibercement.

Wood, Composite Decking, Plywood, OSB, Laminate, Melamine, MDF.

STEEL PLATE LASER-CUT PREMIUM QUALITY STEEL PLATE Made of 46-48 HRC precision German steel which is laser-cut to provide tighter tolerances ensuring longer life and more accurate cuts.

LASER-CUT PREMIUM QUALITY STEEL PLATE Made of 46-48 HRC precision German steel which is laser-cut to provide tighter tolerances ensuring longer life and more accurate cuts.

HEAVY-DUTY LASER-CUT PLATE Made of a thin & strong plate, laser cut from the finest steel which is then hardened to 44 HRC ensuring longer life and precision cutting.

HEAVY-DUTY STAMPED DIE CUT PLATE Made of a thin & strong plate cut from the finest steel which is then hardened to 44 HRC ensuring longer life and precision cutting.

CARBIDE TEETH INDUSTRIAL CHROMIUM MICROGRAIN CARBIDE Cutting teeth are made from a specially formulated chromium micrograin carbide which stays sharper longer by reducing cutting edge abrasion, improving cut quality and tool life.

INDUSTRIAL CHROMIUMMICROGRAIN CARBIDESpecial formulated chromium micrograin carbide which stays sharper longer by reducing cutting edge abrasion, improving cut quality and tool life.

INDUSTRIAL SINTERHIP HI-DENSITY CARBIDEThe new process SinterHIP (high temperature 1025°C and high pressure 105 bar) creates a porosity-free and Hi-Density carbide which provides a longer cutting life than traditional carbide.

LONG LASTING CONSTRUCTION GRADE CARBIDE A specially formulated construction grade carbide which promises longer cutting life and greater resistance to impact.

KERF THICK FULL KERF THIN-KERF THIN-KERF

BRAZING TRI-METAL BRAZING The Silver-Copper-Silver tri-metal brazing process lets the teeth withstand severe impact caused by cutting harder wood and composite material.

TRI-METAL BRAZING The Silver-Copper-Silver tri-metal brazing process lets the teeth withstand severe impact caused by cutting harder wood and composite material.

SILVER BRAZING The silver brazing process lets the teeth withstand the standard impact caused by cutting soft wood and composite material.

SILVER BRAZING The silver brazing process lets the teeth withstand the standard impact caused by cutting soft wood and composite material.

COATING CHROME® COATINGBlade plate is covered with a chrome layer to protect your tool against corrosion and rust, guaranteeing longer tool life.

HARD LACQUER Protects against corrosion and rust.

NON-STICK ORANGE SHIELD COATING® Keeps the blade running cool, reduces pitch build up and protects against corrosion. Ideal for all types of wood including wet lumber.

HARD LACQUER Protects against corrosion and rust.

EXPANSION SLOTS

LASER-CUT HEAT EXPANSION SLOTS Engineered to allow the blade to expand when heat build-up occurs from use, preventing blade warping.

LASER-CUT HEAT EXPANSION SLOTS Are engineered to allow the blade to expand when heat build-up occurs from use, preventing blade warping.

LASER-CUT HEAT EXPANSION SLOTS Engineered to allow blade expansion when heat build-up occurs from use, preventing blade warping.

HEAT EXPANSION SLOTS Engineered to allow blade expansion when heat build-up occurs from use, preventing blade warping.

SOUND DAMPENING CHANNELS

LASER-CUT SLOTS FILLED WITH SOUND-DAMPENING MATERIALSlots are filled with polyurethane to reduce vibrations and noise (10% less than standard saw blades), improving cut quality and blade life.

LASER-CUT SOUND-DAMPENING CHANNELS Specifically designed to dampen running noise and control wobbling caused by unwanted harmonic vibration.

LASER-CUT SOUND-DAMPENING CHANNELS Specifically designed to dampen running noise and control wobbling caused by unwanted harmonic vibration.

TENSIONING RINGS

TENSIONING RING A visible tensioning ring on the blade body provides stability during cut and perfect concentricity during rotation.

TENSIONING RING A visible tensioning ring on the blade body provides stability during cut and perfect concentricity during rotation.

SHARPENING PRECISION MIRROR FINISH SHARPENING Each tooth is ground to razor sharp precision on a multi-axis CNC machine which creates perfect edge angle, guaranteeing extra-clean cuts and extended life. Featuring less than 0.25 μm Rmax in edge roughness.

PRECISION MIRROR FINISH SHARPENING Each tooth is ground to razor sharp precision on a multi-axis CNC machine which creates perfect edge angle, guaranteeing extra-clean cuts and extended life. Featuring less than 0.25 μm Rmax in edge roughness.

SHEAR ANGLE SHARPENING The shear angle grind on the front face of the teeth allows for smoother cutting, while reducing the required cutting force thereby improving cutting speed and setting a new standard for performance.

STANDARD SHARPENING Each tooth is sharpened and carefully inspected to guarantee cleaner cuts and longer life.

CHROME®

®

CHROME®

SHEAR ANGLE

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com


www.scosarg.com 9

Multi-Rip Saw Blades with Rakers Industrial Line

Multi-Rip Anti-Kickback Saw Blades Industrial Line

HWMEC

279

K

P

α

β

ApplicAtion: for rip cutting where the steel body plate prevents vibration during the cutting operation.

MAchines: multi-rip machines with one or two shafts.MAteriAl: dry, soft and hardwood.

278

K

P

α

β

ApplicAtion: for rip cutting where the rakers prevent contact between the steel plate body and the material in use.

MAchines: multi-rip machines with one or two shafts.MAteriAl: (wet or dry) soft and hardwood.

Made in European Union© C.M.T. UTENSILI S.P.A. ITALYWWscosarg.comM

Since 1962

EXCE

LLEN

T Multiple Rip Wood

EXCE

LLEN

T

HWMade in European Union© C.M.T. UTENSILI S.P.A. ITALYWWWscosarg.com

Since 1962

T1

Multiple Rip Wood

10

10

HV10: 1.640N/mm2: 2.200

HV10: 1.640N/mm2: 2.200

Key Way Pin HoleD mm

Z K mm

P mm

T1

mm α βB mm ORDER NO.

250 30 COMBI3 20+4 3,2 2,2 65 18° 10° ATB 1 279.020.10M250 70 21 x 5 20+4 3,2 2,2 65 18° 10° ATB 1 279.020.10V250 80 13 x 5 20+4 3,2 2,2 65 18° 10° ATB 1 279.020.10W300 30 COMBI3 24+4 3,2 2,2 80 18° 10° ATB 1 279.024.12M300 60 21 x 5 24+4 3,2 2,2 80 18° 10° ATB 1 279.024.12U300 70 21 x 5 24+4 3,2 2,2 80 18° 10° ATB 1 279.024.12V300 80 13 x 5 24+4 3,2 2,2 80 18° 10° ATB 1 279.024.12W350 30 COMBI3 28+4 3,5 2,5 105 18° 10° ATB 1 279.028.14M350 60 21 x 5 28+4 3,5 2,5 105 18° 10° ATB 1 279.028.14U350 70 21 x 5 28+4 3,5 2,5 105 18° 10° ATB 1 279.028.14V350 80 14 x 5 28+4 3,5 2,5 105 18° 10° ATB 1 279.028.14W400 30 COMBI3 28+6 4,0 2,8 120 18° 10° ATB 1 279.028.16M400 70 21 x 5 28+6 4,0 2,8 120 18° 10° ATB 1 279.028.16V


Z K mm

P mm α βB

mm ORDER NO.

300 30 COMBI3 28 3,2 2,2 18° 10° ATB 1 278.028.12M300 70 21 x 5 28 3,2 2,2 18° 10° ATB 1 278.028.12V350 30 COMBI3 36 3,5 2,5 18° 10° ATB 1 278.036.14M350 70 21 x 5 36 3,5 2,5 18° 10° ATB 1 278.036.14V

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com


www.scosarg.com10

ApplicAtion: for rip cuts where the thin-kerf reduces material wastes.MAchines: multi-rip machines with one or two shafts.MAteriAl: wet or dry hardwood.

280

ApplicAtion: for rip cuts. Mounted on the sides of gang rip saws, these act as shoulder saw blades and ensure stability, reducing vibration under extreme work load.

MAchines: multi-rip machines with one or two shafts.MAteriAl: thick wet or dry hardwood.

277

K

P

α

β

K

P

α

β

Thin-Kerf Multi-Rip Saw Blades with Rakers Industrial Line

Thick-Kerf Multi-Rip Saw Blades with Rakers Industrial Line

EXCE

LLEN

TEX

CELL

ENT

HWMEC

Made in European Union© C.M.T. UTENSILI S.P.A. ITALYWWW.CMTORANGETOOLS.COM

Since 1962

180 40 21+3 2,5 1,8 30 18° FLAT 1 280.021.07S 200 40 21+3 2,5 1,8 35 18° FLAT 1 280.021.08S

250 70 21 x 5 20+4 2,7 1,8 50 18° 10° ATB 1 280.020.10V250 80 13 x 5 20+4 2,7 1,8 50 18° 10° ATB 1 280.020.10W300 70 21 x 5 24+4 2,7 1,8 60 18° 10° ATB 1 280.024.12V300 80 13 x 5 24+4 2,7 1,8 60 18° 10° ATB 1 280.024.12W

T1

T1

Multiple Rip Wood

Multiple Rip Wood

10

10

HV10: 1.640N/mm2: 2.200

HV10: 1.640N/mm2: 2.200

Key WayD mm

Z K mm

P mm

T1



Z K mm

P mm

T1


300 30 COMBI3 24+4 4,0 2,8 80 18° 10° ATB 1 277.024.12M300 70 21 x 5 24+4 4,0 2,8 80 18° 10° ATB 1 277.024.12V300 80 13 x 5 24+4 4,0 2,8 80 18° 10° ATB 1 277.024.12W

350 30 COMBI3 24+6 4,2 2,8 105 18° 10° ATB 1 277.024.14M350 70 21 x 5 24+6 4,2 2,8 105 18° 10° ATB 1 277.024.14V

HWMEC


Since 1962

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com


www.cmtorangetools.com 11

Saw Blades for Building Contractors

Rip Saw Blades Industrial Line

ApplicAtion: for rip and crosscuts especially designed for building contractors.

MAchines: table saws and portable machines.MAteriAl: soft and hardwood, panels with nails, metal clips and pieces of concrete.

286

285-290-293

250 30 COMBI3 24 2,8 1,8 20° 10° ATB 1 290.250.24M260 30 COMBI3 28 2,8 1,8 20° 10° ATB 1 290.260.28M270 30 2/7/42 28 2,8 1,8 20° 10° ATB 1 290.270.28M300 30 COMBI3 24 3,2 2,2 20° 10° ATB 1 293.024.12M300 35 24 3,2 2,2 20° 10° ATB 1 293.024.12R305 30 2/10/60 28 2,8 1,8 20° 10° ATB 1 293.028.22M315 30 COMBI3 28 3,2 2,2 20° 10° ATB 1 293.028.12M

315 30 COMBI3 36 3,2 2,2 15° 5° ATB 1 285.036.13M350 30 COMBI3 28 3,5 2,5 20° 10° ATB 1 293.028.14M350 35 28 3,5 2,5 20° 10° ATB 1 293.028.14R400 30 COMBI3 36 3,5 2,5 20° 10° ATB 1 285.036.16M450 30 2/10/60 36 3,8 2,8 20° 10° ATB 1 285.036.18M500 30 COMBI3 44 4,0 2,8 20° 10° ATB 1 285.044.20M

K

P

α

β

D mm

D mm

Z

Z

B mm

B mm

K mm

K mm

P mm

P mm

α

α

β

β

ORDER NO.

ORDER NO.

K

P

α

β

250 30 COMBI3 16 2,8 1,8 15° 5° ATB 1 286.016.10M300 30 COMBI3 20 2,8 1,8 15° 5° ATB 1 286.020.12M

300* 30 COMBI3 48 3,2 2,2 15° 10° ATB 1 286.048.12M315 30 COMBI3 24 3,2 2,2 15° 5° ATB 1 286.024.13M350 30 COMBI3 24 3,2 2,2 15° 5° ATB 1 286.024.14M400 30 COMBI3 28 3,2 2,2 15° 5° ATB 1 286.028.16M450 30 2/10/60 32 3,8 2,8 15° 5° ATB 1 286.032.18M500 30 2/10/60 36 3,8 2,8 15° 5° ATB 1 286.036.20M550 30 2/10/60 40 4,2 3,2 15° 5° ATB 1 286.040.22M600 30 2/10/60 40 4,2 3,2 15° 5° ATB 1 286.040.24M700 30 2/10/60 46 4,4 3,2 15° 5° ATB 1 286.046.28M

shop tips: Use our reduction ring from 30 to 25mm order n. 299.225.00 (for rip saw blades Ø250-300-315)Use our reduction ring from 30 to 25mm order n. 299.228.00 (for rip saw blades Ø350 and larger)

ApplicAtion: for rip and glue line rip cuts.MAchines: table and special saws, portable

and ripping machines for automatic or manual feeding.

MAteriAl: soft and hardwood.

EXCE

LLEN

T Rip Wood

HWMade in European Union© C.M.T. UTENSILI S.P.A. ITALYWWW.CMTORANGETOOLS.COM

Since 1962

Pin Hole

Pin Hole

*without limiter

EXCE

LLEN

T Soft wood (with embedded nails, screws, concrete, etc.)

8~10HV10: 1.765N/mm2: 2.150

6~10HV10: 1.550N/mm2: 2.600

HWMade in European Union© C.M.T. UTENSILI S.P.A. ITALYWWWscosarg.com

Since 1962

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com


www.cmtorangetools.com12

Rip & Crosscut Saw Blades Industrial Line

ApplicAtion: for optimal quality rip and crosscuts.MAchines: table and special saws, portable machines.MAteriAl: soft and hardwood, wood-based panels.

285-291-294-295

K

P

α

β

160 20 2/6/32 28 2,2 1,6 15° 10° ATB 1 285.160.28H200 30 2/10/60 + 2/7/42 36 3,2 2,2 15° 10° ATB 1 285.036.08M200 30 2/10/60 + 2/7/42 48 3,2 2,2 15° 15° ATB 1 285.048.08M

250* 20 COMBI3 40 3,2 2,2 15° 10° ATB 1 285.040.10H250 30 COMBI3 40 3,2 2,2 15° 10° ATB 1 285.040.10M250 30 COMBI3 48 3,2 2,2 15° 10° ATB 1 285.048.10M250 30 COMBI3 60 3,2 2,2 10° 15° ATB 1 285.060.10M250 35 40 3,2 2,2 15° 10° ATB 1 285.040.10R250 35 60 3,2 2,2 10° 15° ATB 1 285.060.10R254 30 COMBI3 48 2,4 1,8 - 5° Neg. 15° ATB 1 294.048.10M254 30 COMBI3 60 2,4 1,8 - 5° Neg. 15° ATB 1 294.060.10M260 30 2/10/60 + 2/7/42 48 2,8 1,8 15° 10° ATB 1 285.048.11M260 30 2/10/60 + 2/7/42 60 2,8 1,8 10° 15° ATB 5 285.060.11M260 30 COMBI3 60 2,5 1,8 - 5° Neg. 15° ATB 1 294.060.11M

270* 30 2/7/42 42 2,8 1,8 15° 15° ATB 1 291.270.42M275 20 42 3,2 2,2 15° 10° ATB 1 285.042.11H

280* 30 2/10/60 + 2/7/42 64 2,8 1,8 10° 15° ATB 1 295.064.11M 300* 20 COMBI3 48 3,2 2,2 15° 10° ATB 1 285.048.12H

300 30 COMBI3 36 3,2 2,2 15° 10° ATB 1 285.036.12M300 30 COMBI3 48 3,2 2,2 15° 10° ATB 1 285.048.12M300 30 COMBI3 60 3,2 2,2 15° 10° ATB 1 285.060.12M300 30 COMBI3 72 3,2 2,2 10° 15° ATB 1 285.072.12M300 35 48 3,2 2,2 15° 10° ATB 1 285.048.12R300 35 72 3,2 2,2 10° 15° ATB 1 285.072.12R

305* 30 2/10/60 + 2/7/42 54 2,8 1,8 -5° Neg. 15° ATB 1 294.054.22M 315* 30 COMBI3 54 3,2 2,2 15° 10° ATB 1 294.054.12M

350 30 COMBI3 54 3,5 2,5 15° 10° ATB 1 285.054.14M350 30 COMBI3 72 3,5 2,5 15° 10° ATB 1 285.072.14M350 30 COMBI3 84 3,5 2,5 10° 15° ATB 1 285.084.14M350 35 54 3,5 2,5 15° 10° ATB 1 285.054.14R350 35 84 3,5 2,5 10° 15° ATB 1 285.084.14R400 30 COMBI3 48 3,5 2,5 20° 10° ATB 1 285.048.16M400 30 COMBI3 60 3,5 2,5 10° 15° ATB 1 285.060.16M450 30 2/10/60 54 3,8 2,8 15° 15° ATB 1 285.054.18M450 30 2/10/60 66 3,8 2,8 10° 15° ATB 1 285.066.18M500 30 2/10/60 60 3,8 2,8 15° 15° ATB 1 285.060.20M500 30 2/10/60 72 3,8 2,8 10° 15° ATB 1 285.072.20M550 30 2/10/60 60 4,2 3,2 10° 15° ATB 1 285.060.22M550 30 2/10/60 96 4,2 3,2 10° 15° ATB 1 285.096.22M600 30 2/10/60 66 4,2 3,2 10° 15° ATB 1 285.066.24M700 30 2/10/60 72 4,4 3,2 10° 15° ATB 1 285.072.28M

*Non-low noise

EXCE

LLEN

T Crosscut Wood& Plywood

HWMade in European Union© C.M.T. UTENSILI S.P.A. ITALYWWW.scosarg.com

Since 1962

8~10HV10: 1.765N/mm2: 2.150

D mm

ZB mm

K mm

P mm α β ORDER NO.

Pin Hole

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



Finishing Saw Blades Industrial Line

ApplicAtion: for optimal quality crosscuts.MAchines: table and sizing saws, portable machines.MAteriAl: soft, hard and exotic wood, wood-based panels.

285-294

150 30 2/7/42 48 3,2 2,2 5° 15° ATB 5 285.048.06M160 20 2/6/32 48 2,2 1,6 5° 15° ATB 5 285.160.48H180 30 2/7/42 56 3,2 2,2 5° 15° ATB 5 285.056.07M200 30 2/10/60 + 2/7/42 64 3,2 2,2 5° 15° ATB 1 285.064.08M250 30 COMBI3 80 3,2 2,2 5° 15° ATB 1 285.080.10M250 35 80 3,2 2,2 5° 15° ATB 1 285.080.10R260 30 COMBI3 80 2,5 1,8 -5° Neg. 15° ATB 1 294.080.11M300 30 COMBI3 96 3,2 2,2 5° 15° ATB 1 285.096.12M300 35 96 3,2 2,2 5° 15° ATB 1 285.096.12R305 30 COMBI3 72 3,2 2,2 10° 15° ATB 1 285.072.22M305 30 COMBI3 72 3,2 2,2 -5° Neg. 15° ATB 1 294.072.22M

315 30 COMBI3 72 3,2 2,2 15° 10° ATB 1 285.072.13M350 30 COMBI3 108 3,5 2,5 5° 15° ATB 1 285.108.14M350 35 108 3,5 2,5 5° 15° ATB 1 285.108.14R400 30 COMBI3 96 3,5 2,5 10° 15° ATB 1 285.096.16M

400 30 COMBI3 120 3,5 2,5 10° 15° ATB 1 285.120.16M

α K

β

P

ApplicAtion: for optimal quality crosscuts on moulds and end trimming for perfect joints.

MAchines: table and sizing saws, single or double mitre saws.MAteriAl: soft and hardwood, MDF.

285.5

n Orange PTFE coated blades: a great choice for the shop that keeps its blades running all day, every day. n With their heavy-gauge plate, these blades have the stamina for saws with lots of power.

P

K

β

α

Double side grind

250 30 COMBI3 80 3,0 2,5 10° 20° ATB 1 285.580.10M300 30 COMBI3 96 3,0 2,5 10° 20° ATB 1 285.596.12M

Super Finishing Saw Blades for Cutting Frames XTreme Line

®

EXCE

LLEN

T Two-Sided Melamine Plywood

GOO

D

Rip Wood Cross Wood

EXCE

LLEN

T Wooden Frames MDF & PVC

HW


Since 1962

Made in European Union© C.M.T. UTENSILI S.P.A. ITALYWWWscosarg.com

Since 1962

8HV10: 1.950N/mm2: 2.300

8HV10: 1.950N/mm2: 2.300

D mm

D mm

Z

Z

B mm

B mm

K mm

K mm

P mm

P mm

α

α

β

β

ORDER NO.

ORDER NO.

Pin Hole

Pin Hole

®

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com


www.scosarg.com14

Low Noise & Chrome Coated Saw Blades with ATB Grind

α K

β

P

ApplicAtion: for optimal quality rip and crosscuts.MAchines: table and special saws, portable machines.MAteriAl: soft and hardwood, wood-based panels.

285

250 30 COMBI3 40 3,2 2,2 15° 10° ATB 5 285.640.10M300 30 COMBI3 48 3,2 2,2 15° 10° ATB 5 285.648.12M350 30 COMBI3 54 3,5 2,5 15° 10° ATB 5 285.654.14M400 30 COMBI3 60 3,5 2,5 10° 15° ATB 1 285.660.16M

250 30 COMBI3 60 3,2 2,2 10° 15° ATB 5 285.660.10M300 30 COMBI3 72 3,2 2,2 10° 15° ATB 5 285.672.12M350 30 COMBI3 84 3,5 2,5 10° 15° ATB 5 285.684.14M

400 30 COMBI3 96 3,5 2,5 10° 15° ATB 5 285.696.16M

250 30 COMBI3 80 3,2 2,2 5° 15° ATB 5 285.680.10M300 30 COMBI3 96 3,2 2,2 5° 15° ATB 5 285.696.12M350 30 COMBI3 108 3,5 2,5 5° 15° ATB 5 285.708.14M

CHROME®

ApplicAtion: for optimal quality crosscuts.MAchines: table and sizing saws, portable machines.MAteriAl: soft, hard and exotic wood, wood-based panels.

ApplicAtion: for high-quality cross cutting.MAchines: table and sizing saws, portable machines.MAteriAl: soft, hard and exotic wood, wood-based panels,

one-sided veneer, paper-base laminatesand thermoplastic material.

ORANGE CHROME®

GOO

DEX

CELL

ENT

EXCE

LLEN

T

Cross Wood

Cross Wood

Crosscut Plywood

Crosscut Plywood

Crosscut Plywood

Two-Sided Melamine

HW Low noise

CHROME®

8

8

8

HV10: 1.870N/mm2: 2.200

HV10: 1.930N/mm2: 2.300

HV10: 1.930N/mm2: 2.300

FILLED SLOTS

D mm

D mm

D mm

Z

Z

Z

B mm

B mm

B mm

K mm

K mm

K mm

P mm

P mm

P mm

α

α

α

β

β

β

ORDER NO.

ORDER NO.

ORDER NO.

Pin Hole

Pin Hole

Pin Hole

CHROME®

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com


www.scosarg.com 15

250 30 COMBI3 80 3,2 2,2 -2° Neg. 38° ATB 5 283.680.10M300 30 COMBI3 96 3,2 2,2 2° 38° ATB 5 283.696.12M

ApplicAtion: for sizing cuts, perfect finishing on both sizes of double-sided panels without using scoring blades.

MAchines: table and vertical saws, sizing and portable machines.

MAteriAl: single or double-sided laminated panels withcoating and veneered panels.

283 ORANGE CHROME®CHROME®HW LONG

L I F ELow noise

CHROME®

P

Kα

β

P

Kα

β

EXCE

LLEN

TEX

CELL

ENT

Cross Wood

Cross Wood

Plywood

Plywood

Two-Sided Melamine

Two-Sided Melamine

CHROME®

8HV10: 2.150N/mm2: 2.500

FILLED SLOTS

Fine Cut-Off Saw Blades for Two-Sided Melamine Industrial Line

ApplicAtion: for sizing cuts, perfect finishing on both sizes of double-sided panels without using scoring blades.

MAchines: table and vertical saws, sizing and portable machines.MAteriAl: single or double-sided laminated panels with

coating and veneer.

283

220* 30 2/7/42 64 3,2 2,2 -5° Neg. 40° ATB 1 283.064.09M250 30 COMBI3 80 3,2 2,2 -2° Neg. 40° ATB 1 283.080.10M300 30 COMBI3 96 3,2 2,2 2° 40° ATB 1 283.096.12M350 30 COMBI3 108 3,5 2,5 5° 40° ATB 1 283.108.14M

*Non-low noise



Since 1962

8HV10: 1.950N/mm2: 2.300

D mm

ZB mm

K mm


Pin Hole

D mm

ZB mm

K mm


Pin Hole

Scorer not required

Scorer not required

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com


www.scosarg.com16

Super Fine Finishing Blade XTreme Line


54321 1 42

53

K

P

α

250 30 COMBI3 80 3,2 2,2 15° 1FTG+4ATB 1 274.080.10M300 30 COMBI3 100 3,2 2,2 15° 1FTG+4ATB 1 274.100.12M

ApplicAtion: for high-quality cross cutting.MAchines: table and sizing saws, portable machines.MAteriAl: soft, hard and exotic wood, wood-based panels, one-sided veneered panels, paper-based

laminate and thermoplastic material.

274

ApplicAtion: for sizing cuts, perfect finishing with high feed rate and long tool life without using scoring blade.MAchines: table and vertical saws, sizing and portable machines.MAteriAl: single or double-sided laminated panels with hard coating and veneered panels.

287

P

Kα

R

Plywood PVC moulding/frames For All Non-FerrousMetals & PVC

EXCE

LLEN

T Two-Sided Melamine

Max run out tolerance 0,05mm

EXCE

LLEN

T Crosscut Plywood Two-Sided Melamine

HWMade in European Union© C.M.T. UTENSILI S.P.A. ITALYWWW.scosarg.com

Since 1962

8HV10: 1.950N/mm2: 2.300

8HV10: 1.950N/mm2: 2.300

D mm

ZB mm

K mm


Pin Hole

D mm

ZB mm

K mm


Pin Hole

Negative Hook Angle220 30 2/7/42 42 3,2 2,2 -6° Neg. HDF 1 287.043.09M250 30 COMBI3 48 3,2 2,2 -6° Neg. HDF 1 287.049.10M303 30 COMBI3 60 3,2 2,2 -6° Neg. HDF 1 287.061.12M

Scorer not required


Since 1962

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com





ApplicAtion: for sizing cuts, perfect finishing with high feed rate and long tool life without using scoring blade.

MAchines: table and vertical saws, sizing and portable machines.MAteriAl: single or double-sided laminated panels with hard

coating and veneered panels.

287 ORANGE CHROME®

P

Kα

R

EXCE

LLEN


ApplicAtion: for sizing cuts, perfect finishing with high feed rate and long tool life without using scoringblade.

MAchines: table and vertical saws, sizing and portable machines.MAteriAl: single or double-sided laminated panels with hard coating and veneered panels.

287

P

Kα

R

EXCE

LLEN



Since 1962

10

10HV10: 2.150N/mm2: 2.500

HV10: 1.950N/mm2: 2.300

D mm

ZB mm

K mm


Pin Hole

D mm

ZB mm

K mm


Pin Hole

Positive Hook Angle160 20 2/6/32 34 2,6 1,8 10° HDF 5 287.034.06H220 30 2/7/42 42 3,2 2,2 10° HDF 1 287.042.09M250 30 COMBI3 48 3,2 2,2 10° HDF 1 287.048.10M303 30 COMBI3 60 3,2 2,2 10° HDF 1 287.060.12M

Positive Hook Angle250 30 COMBI3 48 3,2 2,2 10° HDF 5 287.648.10M303 30 COMBI3 60 3,2 2,2 10° HDF 5 287.660.12M

Scorer not required

Scorer not required

CHROME®

FILLED SLOTS

CHROME®HW LONGL I F E

Low noise

CHROME®

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



Low Noise & Chrome Coated Saw Blades with TCG Grind

ApplicAtion: for sizing cuts, perfect finishing with scoring blades.MAchines: table saws, horizontal and vertical sizing machines.MAteriAl: single or double-sided plastic-laminated panels.

281

250 30 COMBI3 80 3,2 2,2 5° TCG 5 281.680.10M 300 30 COMBI3 72 3,2 2,2 10° TCG 5 281.672.12M 300 30 COMBI3 96 3,2 2,2 5° TCG 5 281.696.12M 350 30 COMBI3 84 3,5 2,5 10° TCG 5 281.684.14M 350 30 COMBI3 108 3,5 2,5 5° TCG 5 281.708.14M

α

0.3

K

P

CHROME®

ApplicAtion: for sizing cuts, perfect finishing without using scoring blade.MAchines: table saws, horizontal and vertical sizing machines.MAteriAl: double-sided laminated panels.

295

250 30 COMBI3 78 3,2 2,2 10° FFT 1 295.078.10M 300 30 COMBI3 96 3,2 2,2 10° FFT 1 295.096.12M 350 30 COMBI3 108 3,5 2,5 10° FFT 1 295.108.14M

α

321

0.3

K

P321 1 321

Melamine & Laminated Long-Lasting Saw Blades XTreme Line

ORANGE CHROME®

EXCE

LLEN


Max run out tolerance 0,05mm

EXCE

LLEN

T Plywood Two-Sided Melamine


Since 1962

LONGL I F E

8HV10: 2.150N/mm2: 2.500

8HV10: 2.150N/mm2: 2.500

FILLED SLOTS

D mm

ZB mm

K mm


Pin Hole

D mm

ZB mm

K mm


Pin Hole

Scorer not required

CHROME®HW LONGL I F E

Low noise

CHROME®

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



Scorer not required

FFT TCG

Laminated & Chipboard Saw Blades Industrial Line

ApplicAtion: for sizing cuts, perfect finishing without using scoring blade.MAchines: table saws, horizontal and vertical sizing machines.MAteriAl: single or double-sided laminated panels.

281

31 2P

K

0.3

1 2 3 1 2 3 1

α

281

160 20 (Virutex) 4/7/32 45° 40 2,2 1,6 10° TCG 5 281.160.40H 160* 20 2/6/32 48 2,2 1,6 10° TCG 5 281.160.48H 190* 20 (Festool® FF) 5/7/2,5 54 2,6 1,8 4° TCG 5 281.190.54FF 200* 30 2/7/42 64 3,2 2,2 10° TCG 1 281.064.08M 220* 30 2/7/42 64 3,2 2,2 10° TCG 1 281.064.09M 225* 30 2/7/42 64 2,6 1,8 4° TCG 1 281.225.64M 250 30 COMBI3 60 3,2 2,2 10° TCG 1 281.060.10M 250 30 COMBI3 80 3,2 2,2 10° TCG 1 281.080.10M 300 30 COMBI3 72 3,2 2,2 10° TCG 1 281.072.12M 300 30 COMBI3 96 3,2 2,2 10° TCG 1 281.096.12M 350 30 COMBI3 84 3,5 2,5 10° TCG 1 281.084.14M 350 30 COMBI3 108 3,5 2,5 10° TCG 1 281.108.14M

α

0.3

K

P

*Non-low noise

Laminated & Chipboard Saw Blades XTreme Line

EXCE

LLEN

T Two-Sided Melamine Crosscut Plywood

EXCE

LLEN

T Two-Sided Melamine Plywood


Since 1962

LONGL I F E


Since 1962

8HV10: 1.950N/mm2: 2.300

8~10HV10: 1.950N/mm2: 2.300

D mm

D mm

Z

Z

B mm

B mm

K mm

K mm

P mm

P mm

α

α

β

β

ORDER NO.

ORDER NO.

Pin Hole

Pin Hole

P

Kα

0.3

45°

CHROME®

ORANGE CHROME®

ApplicAtion: for sizing cuts, perfect finishing by using scoring blades.MAchines: table saws, horizontal and vertical sizing machines.MAteriAl: single or double-sided plastic-laminated panels.

160 20 2/6/32 56 2,2 1,6 -3° Neg. TCG 5 281.161.56H 165 20 2/6/32 56 2,2 1,6 -3° Neg. TCG 5 281.166.56H 220 30 COMBI3 63 3,2 2,2 -3° Neg. FFT 1 281.063.09M 250 30 COMBI3 60 3,2 2,2 -3° Neg. FFT 1 281.061.10M 260 30 COMBI3 64 2,5 1,8 -3° Neg. TCG 1 281.065.11M 300 30 COMBI3 72 3,2 2,2 -3° Neg. FFT 1 281.073.12MORANGE CHROME® 250 30 COMBI3 80 3,2 2,2 -3° Neg. TCG 5 281.681.10M 300 30 COMBI3 96 3,2 2,2 -3° Neg. TCG 5 281.697.12M

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



THE SAW BLADES REVOLUTION!EX

CELL

ENT

Gypsum fiberboard veneer

Veneered laminated wood

Spruce

Multiplex

Double panel

Hollow Alu profile

Gypsum plasterboard

Glued timber panels

Poplar

Wood core plywood

Lacquered MDF Profile

Alu honeycomb panel

Wood fiber

Oak

Balsa

Rough particleboard

Hard fiber panel

Alu Foam

Planed product

Beech

Ash

Lacquered MDF profile

Floor paneling

PS (Polystyrene)

Jointed mat

Larch

Fir

CPL-laminated acoustic particleboard

Honeycomb panel

PET honeycomb core

Glulam® Construction timber

Bangkirai

Cork

Soft fiberboard

Solid wood panel

HPL laminate OSB/Chipboard

Quality laminated timber

Coconut

Plywood

Raw MDF

Wood PMMA

GOO

D

Gypsum fiberboard

Battens

Gypsum fiberboard with MDF Fibercement board Mineral wool/clay

Melamine laminatedparticleboard

GFK grid

HPL laminated particleboard

Polyethylene

High-gloss film particleboard

Board material

Lacquered MDFBeams MDF polystyrene panel

It is not recommended to use the saw blades for longitudinal cuts in soft woodand material thicknesses of more than 40mm.

Do not cut materials with nails, stone and metal parts.Chip-free cuts can only be guaranteed in combination with a suitable scoring saw blade.

N O I S E L E S S ALL-AROUNDLeuco Patent Pending tooth geometry and tool body design guarantee an extensive array of applications when working with larger traditional solid woods and wood-based panels.The “Xtreme All-Around” blade delivers excellent quality, ensures 20 times longer lifetime and boasts a 20% reduction in noise compared to conventional carbide saw blades.

NO LIMITS: CUT ALL THESE MATERIALS WITH ONE BLADE!

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



Multi-Material Saw Blades

235ApplicAtion: f or sizing cuts, perfect finishing with high feed rate and long tool life.MAchines: chop saws and portable machines, table and vertical panel sizing saws, CNCs and through-feed

installations. MAteriAl: look at the opposite page.

160 20 2/6/32 20 2,2 1,6 10° HR 1 235.160.20H 190 30 2/7/42 24 2,5 2,0 10° HR 1 235.190.24M 216 30 2/7/42 30 2,5 2,0 10° HR 1 235.216.30M 250 30 COMBI3 36 2,5 2,0 10° HR 1 235.250.36M 300 30 COMBI3 44 2,5 2,0 10° HR 1 235.300.44M

D mm

ZB mm

K mm


Pin Hole

N O I S E L E S S ALL-AROUND

R

K

P

α

3HV10: 10.000Re-Sharpening: 2x

LONGER LIFETHAN CARBIDE

20XDPMade in European Union© C.M.T. UTENSILI S.P.A. ITALYWWW.CMTORANGETOOLS.COM

Since 1962

LONGL I F E

longer lifetime tHanKS to diamond tiPSClean your circolar saw blades on a regular basis. You will profit from a long-lasting and precise cutting quality and maximize the lifetime of your innovative saw blades many timer over.

We recommend the use of the splitting wedge with thickness between 2,0 and 2,4mm.

NOISELESS

ALL-AROUND

QUALITY

FAST

LIFETIME

Thanks the new minimization of gullets design this blade succeeded in reducing the noise of idling by up to 15 dB(A) compared to conventional carbide saw blades. With a noise level of just around 70dB(A) when idling, the wearing of hearing protection is outdated.

New industry standard with universal application in countless materials and suitable for all chop saws and portable machines, table and vertical panel sizing saws, CNCs and through-feed installations

The special hollow back tooth configuration (HR) guarantees an excellent cutting quality.

The teeth are surprisingly thin! The cutting width is a mere 2,5 mm and they generate noticeably lower cutting pressure and therefore also require less power during usage. Resharpenable max 2 times.

The lifetime is 20X longer than carbide blades thanks to the diamond tips.

recommended uSe

Patent Pending

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



DP Laminated & Chipboard Saw Blades XTreme Line

P

Kα

0.3

237

120 20 20 3,1-3,7 5° CONICAL 1 238.120.20H 125 20 20 3,1-3,7 5° CONICAL 1 238.125.20H

238

K maxK min

α


50X

High-quality nickel-plated saw blades with anti-friction and anti-corrosion properties.

High-quality nickel-plated saw blades with anti-friction and anti-corrosion properties.

ApplicAtion: for chip-free scoring of plastic-laminated panels; increased tool life up to 50 times longer than HW blades thanks to a special polycrystalline diamond formula. The best quality/price ratio!

MAchines: horizontal and vertical sizing machines equipped with scoring device.MAteriAl: single or double-sided plastic-laminated panels, MDF and HDF.

ApplicAtion: for sizing cuts, perfect finishing (using scoring blade) and increased tool life up to 50 times longer than HW blades thanks to a special polycrystalline diamond formula. The best quality/price ratio!

MAchines: table saws, horizontal and vertical sizing machines.MAteriAl: single or double-sided plastic-laminated panels, MDF and HDF.

DP Conical Scoring Blades XTreme Line

250 30 COMBI3 48 3,2 2,2 10° 45° TCG 1 237.048.10M 300 30 COMBI3 60 3,2 2,2 10° 45° TCG 1 237.060.12M 300 30 COMBI3 96 3,2 2,2 15° 45° TCG 1 237.096.12M 350 30 COMBI3 72 3,5 2,4 15° 45° TCG 1 237.072.14M

EXCE

LLEN

T Two-Sided Melamine Wood Products

EXCE

LLEN

T Two-Sided Melamine Wood Products

DPMade in European Union© C.M.T. UTENSILI S.P.A. ITALYWWW.CMTORANGETOOLS.COM

Since 1962

LONGL I F E

4 HV10: 10.000Re-Sharpening: 6x

4 HV10: 10.000Re-Sharpening: 6x

D mm

D mm

Z

Z

B mm

B mm

K mm

K mm

P mm α

α

β

β

ORDER NO.

ORDER NO.

Pin Hole


50XDPMade in European Union© C.M.T. UTENSILI S.P.A. ITALYWWW.CMTORANGETOOLS.COM

Since 1962

LONGL I F E

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



289

Adjustable Scoring Blades Industrial Line

ApplicAtion: for chip-free scoring on plastic-laminated panels.MAchines: horizontal and vertical sizing machines equipped with scoring device not allowing for cutting depth

adjustment.MAteriAl: single or double-sided plastic-laminated panels, MDF.

D mm

ZB mm

K mm α β ORDER NO.

70 20 2/3,1 - 3,8/32 8+8 2,8-3,6 12° FLAT 1 289.070.16H 299.000.05H 80 20 2/3,1 - 3,8/32 10+10 2,8-3,6 12° FLAT 1 289.080.20H 299.000.05H 100 20 2/3,1 - 3,8/42 10+10 2,8-3,6 12° FLAT 1 289.100.20H 299.000.02K 100 22 2/3,1 - 3,8/42 10+10 2,8-3,6 12° FLAT 1 289.100.20K 299.000.02K 120 20 2/3,1 - 3,8/42 12+12 2,8-3,6 12° FLAT 1 289.120.24H 299.000.02K 120 22 2/3,1 - 3,8/42 12+12 2,8-3,6 12° FLAT 1 289.120.24K 299.000.02K 120 50 4/6,2 - 10/62 12+12 2,8-3,6 12° FLAT 1 289.120.24T* 125 20 2/3,1 - 3,8/42 12+12 2,8-3,6 12° FLAT 1 289.125.24H 299.000.02K 125 22 2/3,1 - 3,8/42 12+12 2,8-3,6 12° FLAT 1 289.125.24K 299.000.02K

EXCE

LLEN


PVCSHIMS

Pin Hole

LONGL I F EHW


Since 1962

Industrial Chrome-Coated Adjustable Scoring Blades

HW Low noise

CHROME®

CHROME®

ORANGE CHROME®

CHROME®

100 20 2/4,2/42 10+10 2,8-3,6 11° 5° ATB 5 289.700.20H 120 20 2/4,2/42 12+12 2,8-3,6 11° 5° ATB 5 289.720.24H 120 22 2/4,2/42 12+12 2,8-3,6 11° 5° ATB 5 289.720.24K 125 20 2/4,2/42 12+12 2,8-3,6 11° 5° ATB 5 289.725.24H

LONGL I F E

ApplicAtion: for chip-free scoring on plastic-laminated panels.MAchines: horizontal and vertical sizing machines equipped with scoring device.MAteriAl: single or double-sided plastic-laminated panels, MDF.

289

EXCE

LLEN


8~10

8~10

HV10: 2.150N/mm2: 2.500

HV10: 2.150N/mm2: 2.500

D mm

ZB mm

K mm α β ORDER NO.

Pin Hole

P

K

β

Shield

Shield

K

* Suitable for Altendorf Rapido System

Spare parts

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



Conical Scoring Blades Industrial Line

ApplicAtion: for chip-free scoring on plastic-laminated panels.MAchines: horizontal and vertical sizing machines equipped with scoring device for vertical

adjustment.MAteriAl: single or double-sided plastic-laminated panels, MDF.

288

K maxK min

P

CO+FTG CO+5°ATB

EXCE

LLEN


LONGL I F EHW


Since 1962

HW Low noise

CHROME®

CHROME®

ORANGE CHROME®

CHROME®

120 20 24 3,1-4,3 2,2 0° CO+6° ATB 5 288.720.24H 120 22 24 3,1-4,3 2,2 0° CO+6° ATB 5 288.720.24K 125 20 24 3,1-4,3 2,2 0° CO+6° ATB 5 288.725.24H

K maxK min

P

CO+6°ATB

LONGL I F E

ApplicAtion: for chip-free scoring on plastic-laminated panels.MAchines: horizontal and vertical sizing machines equipped with scoring device.MAteriAl: single or double-sided plastic-laminated panels, MDF.

288

Industrial Chrome-Coated Scoring Blades

6~10HV10: 2.150N/mm2: 2.500

6~10HV10: 2.150N/mm2: 2.500

D mm

ZB mm

K mm


4,4

4,4

3 5

4,4

4,8

D mm

ZB mm

K mm


ORDER NO.

80 20 12 3,1-3,6 2,2 10° CO+FTG 1 S288.080.12H 100 20 20 3,1-4,0 2,5 5° CO+5° ATB 1 288.100.20H 100 22 20 3,1-4,0 2,5 5° CO+5° ATB 1 288.100.20K 120 20 24 3,1-4,0 2,5 5° CO+5° ATB 1 288.120.24H 120 20 24 3,4-4,2 2,5 5° CO+5° ATB 1 288.120.24H1 120 22 24 3,1-4,0 2,5 5° CO+5° ATB 1 288.120.24K 125 20 24 3,1-4,0 2,5 5° CO+5° ATB 1 288.125.24H 125 20 24 3,4-4,2 2,5 5° CO+5° ATB 1 288.125.24H1 125 20 24 4,3-5,5 3,2 10° CO+FTG 1 288.125.24H2 125 22 24 3,1-4,0 2,5 5° CO+5° ATB 1 288.125.24K 125 45 24 4,3-5,5 3,2 10° CO+FTG 1 288.125.24Q 140 16 1/6/33 24 3,1-4,0 2,2 10° CO+FTG 1 Y288.140.24E 150 45 3/11/70 36 4,3-5,5 3,2 10° CO+FTG 1 288.150.36Q 160 45 3/11/70 36 4,3-5,5 3,2 10° CO+FTG 1 288.160.36Q 160 55 3/7/66 + 3/6/84 36 4,3-5,5 3,2 10° CO+FTG 1 288.160.36O 160 55 3/7/66 + 3/6/84 36 4,7-6,0 3,5 10° CO+FTG 1 Y288.160.36O2 180 20 36 4,3-5,5 3,2 10° CO+FTG 1 Y288.180.36H 180 30 36 4,4-5,3 3,2 10° CO+FTG 1 288.180.36M 180 45 36 4,3-5,5 3,2 8° CO+5° ATB 1 288.180.36Q2 180 45 36 4,8-5,6 3,5 10° CO+FTG 1 288.180.36Q 180 55 36 5,0-6,2 3,5 10° CO+FTG 1 288.180.36O 180 50 3/12,5/80 44 4,3-5,5 3,2 10° CO+FTG 1 288.180.44T 200 20 36 4,4-5,3 3,2 10° CO+FTG 1 288.200.36H 200 45 36 4,7-6,0 3,5 10° CO+FTG 1 288.200.36Q 200 45 36 4,3-5,5 3,2 10° CO+FTG 1 Y288.200.36Q2 200 65 2/9/100 + 2/9/110 36 4,4-5,3 3,2 10° CO+FTG 1 288.200.36J 215 50 3/15/80 42 4,3-5,5 3,2 8° CO+FTG 1 288.215.42T 300 50 3/15/80 48 4,3-5,5 3,2 10° CO+FTG 1 288.300.48T 300 65 2/9/100 + 2/9/110 72 4,3-5,5 3,2 10° CO+FTG 1 288.300.72J

Pin Hole

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



281-282

P

Kα

0.5

ApplicAtion: for sizing single sheets and multiple panels.MAchines: horizontal panel sizing machines.MAteriAl: single or double-sided plastic-laminated panels, MDF.

Panel Sizing Saw Blades Industrial Line

EXCE

LLEN


LONGL I F E Made in European Union© C.M.T. UTENSILI S.P.A. ITALYWWW.CMTORANGETOOLS.COM

Since 1962

8~10HV10: 2.150N/mm2: 2.500

D mm

ZB mm

K mm

P mm α β loW noiSe ORDER NO.

ORDER NO.

COMBI32/7/42mm2/9/46,4mm2/10/60mm

COMBI52/7/110mm2/8,4/130mm2/14/110mm4/9/100mm4/19/120mm

COMBI72/10/80mm 1/11/85mm2/11/115mm2/11/148mm2/14/100mm2/14/125mm2/19/120mm

250 30 COMBI3 60 3,2 2,2 10° TCG 1 281.060.10M 250 30 COMBI3 80 3,2 2,2 10° TCG 1 281.080.10M 300 30 COMBI3 60 4,4 3,2 16° TCG 1 282.060.12M 300 30 COMBI3 72 3,2 2,2 10° TCG 5 281.072.12M 300 30 COMBI3 96 3,2 2,2 10° TCG 1 281.096.12M 300 75 60 4,4 3,2 16° TCG 1 282.060.12X 300 80 COMBI5 60 4,4 3,2 16° TCG 1 282.060.12W 320 65 2/9/100 + 2/9/110 60 4,4 3,2 16° TCG 1 Y282.060.13J 320 65 2/9/100 + 2/9/110 72 4,4 3,2 16° TCG 1 282.072.13J 350 30 COMBI3 54 4,4 3,2 16° TCG 1 282.054.14M 350 30 COMBI3 72 4,4 3,2 16° TCG 1 282.072.14M 350 30 COMBI3 108 3,5 2,5 10° TCG 1 281.108.14M 350 50 3/12,5/80 72 4,4 3,2 16° TCG 1 282.072.14T 350 60 2/14/100 72 4,4 3,2 16° TCG 1 Y282.072.14U 350 75 4/15/105 + 3/7/100 54 4,4 3,2 16° TCG 1 282.054.14X 350 75 4/15/105 + 3/7/100 72 4,4 3,2 16° TCG 1 282.072.14X 350 80 COMBI5 54 4,4 3,2 16° TCG 1 282.054.14W 350 80 COMBI5 72 4,4 3,2 16° TCG 1 282.072.14W 355 30 2/7/42 + 2/10/60 72 4,4 3,2 16° TCG 1 S282.03556 355 65 2/9/100 + 2/9/110 72 4,4 3,2 16° TCG 1 282.072.14J2 355 80 4/9/100 + 2/9/110 + 2/14/110 72 4,4 3,2 16° TCG 1 282.072.14W2 380 60 2/14/100 72 4,4 3,2 15° TCG 1 282.072.15U2 380 60 COMBI7 72 4,8 3,5 16° TCG 1 282.072.15U 380 80 COMBI5 72 4,4 3,2 16° TCG 1 282.072.15W 400 30 2/10/60 60 4,4 3,2 16° TCG 1 282.060.16M 400 30 2/10/60 72 4,4 3,2 16° TCG 1 282.072.16M 400 60 COMBI7 72 4,4 3,2 16° TCG 1 282.072.16U 400 75 4/15/105 60 4,4 3,2 16° TCG 1 282.060.16X 400 75 4/15/105 72 4,4 3,2 16° TCG 1 282.072.16X 400 80 COMBI5 60 4,4 3,2 16° TCG 1 282.060.16W 400 80 COMBI5 72 4,4 3,2 16° TCG 1 282.072.16W 420 80 4/9/100 + 2/9/110 + 2/14/110 72 4,4 3,2 15° TCG 1 282.072.17W 430 65 2/9/100 + 2/9/110 72 4,4 3,2 16° TCG 1 Y282.072.17J 430 75 4 /15/105 72 4,4 3,2 16° TCG 1 282.072.17X 430 80 COMBI5 72 4,4 3,2 16° TCG 1 282.072.17W2 450 30 2/10/60 + 2/13/94 72 4,4 3,2 16° TCG 1 Y282.072.18M2 450 60 COMBI7 72 4,8 3,5 16° TCG 1 282.072.18U 450 80 COMBI5 72 4,8 3,5 16° TCG 1 282.072.18W2 500 60 COMBI7 72 4,8 3,5 16° TCG 1 282.072.20U 500 80 COMBI5 72 4,8 3,5 16° TCG 1 Y282.072.20W 550 100 72 5,2 3,5 16° TCG 1 282.072.22A

Pin Hole

Ø30 Ø80 Ø60

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



Non-Ferrous Metal & Plastic Material Saw Blades Industrial Line

284

P

α K

0.3

ApplicAtion: for cutting and dividing tubes, wire drawn products and solid blocks.MAchines: table saws, single or double mitre saws with mechanical clamping of the workpiece. MAteriAl: aluminium, brass, copper alloys, plastic, composite materials.WArning: it is recommended to properly clamp the workpiece during cutting operations and to use a liquid lubricant. Wax sticks are NOT RECOMMENDED.

reMArks: in plastic carrying case.


Since 1962

EXCE

LLEN

T For All Non-FerrousMetals & PVC

160 20 - 24 2,2 1,6 5° TCG 5 284.160.24H 190 30 - 30 2,6 2,2 5° TCG 5 284.190.30M 216 30 2/7/42 40 2,6 2,2 5° TCG 5 284.216.40M

250 32 2/12/64 80 3,2 2,5 5° TCG 1 284.080.10P 300 32 2/12/64 96 3,2 2,5 5° TCG 1 284.096.12P 350 32 2/12/64 92 3,2 2,5 5° TCG 1 284.092.14P 350 32 2/12/64 108 3,2 2,5 5° TCG 1 284.108.14P 400 32 2/12/64 96 3,8 3,2 5° TCG 1 284.096.16P 420 32 2/12/64 96 3,8 3,2 5° TCG 1 284.096.17P 450 30 2/10/60 108 3,8 3,2 5° TCG 1 284.108.18M 450 32 2/12/64 108 3,8 3,2 5° TCG 1 284.108.18P 500 30 2/10/60 120 4,0 3,2 5° TCG 1 284.120.20M 500 32 2/12/64 120 4,0 3,2 5° TCG 1 284.120.20P

Saw Blades for Portable Machines. Positive Hook Angle

Saw Blades for Industrial Machines. Positive Hook Angle

reMArks: in cardboard box.

8HV10: 1.765N/mm2: 2.150

D mm

ZB mm

K mm


Pin Hole

D mm

ZB mm

K mm


Pin Hole

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com




Since 1962

Non-Ferrous Metal & Laminated Panel Saw Blades Industrial Line

296-297

P

Kα

0.3

45°

Saw Blades for Portable Machines & Mitre Saws. Negative Hook Angle

reMArks: in plastic carrying case.

reMArks: in cardboard box.

250 30 COMBI3 80 3,2 2,5 -6° Neg. TCG 1 297.080.10M 250 32 2/12/64 80 3,2 2,5 -6° Neg. TCG 1 297.080.10P 254 30 COMBI3 80 3,2 2,5 -5° Neg. TCG 1 297.081.10M 260 30 COMBI3 80 2,8 2,2 -6° Neg. TCG 1 297.080.11M 280* 30 COMBI3 64 3,2 2,5 -6° Neg. TCG 1 297.064.11M 300 30 COMBI3 96 3,2 2,5 -6° Neg. TCG 1 297.096.12M 300 32 2/12/64 96 3,2 2,5 -6° Neg. TCG 1 297.096.12P 305* 30 COMBI3 96 3,2 2,5 -6° Neg. TCG 1 297.096.13M 315 30 COMBI3 96 3,2 2,5 -6° Neg. TCG 1 297.096.23M 330 30 COMBI3 96 3,2 2,5 -6° Neg. TCG 1 297.096.33M 330 32 COMBI3 96 3,2 2,5 -6° Neg. TCG 1 297.096.33P 350 30 COMBI3 108 3,2 2,5 -6° Neg. TCG 1 297.108.14M 350 32 4/12/64 108 3,2 2,5 -6° Neg. TCG 1 297.108.14P 400 30 2/10/60 120 3,8 3,2 -6° Neg. TCG 1 297.120.16M 400 32 4/12/64 108 3,8 3,2 -6° Neg. TCG 1 297.108.16P 450 30 2/10/60 140 3,8 3,2 -6° Neg. TCG 1 Y297.140.18M 450 30 2/10/60 108 3,8 3,2 -6° Neg. TCG 1 297.108.18M 450 32 2/12/64 108 3,8 3,2 -6° Neg. TCG 1 297.108.18P 500 30 2/10/60 120 4,0 3,2 -6° Neg. TCG 1 297.120.20M 500 32 2/12/64 120 4,0 3,2 -6° Neg. TCG 1 297.120.20P

Saw Blades to Fit on Trim & Mitre Saws, Table Saws & Combined Joinery Machines. Negative Hook Angle

*Non-low noise

*Non-low noise

ApplicAtion: for cutting and dividing tubes, profile/extrusion products and solid blocks.MAchines: single or double mitre saws, radial saws. Use series 296 for portable machines. MAteriAl: aluminium, brass, copper alloys, plastic, composite material,

melamine and laminated panels.WArning: it is recommended to use a liquid lubricant. Wax sticks are NOT RECOMMENDED.

120* 20 2/5,5/30 36 1,8 1,2 -6° Neg. TCG 5 296.120.36H 160* 20 2/6/32 40 2,2 1,6 -6° Neg. TCG 5 296.160.40H 160* 20 2/6/32 56 2,2 1,6 -6° Neg. TCG 5 296.160.56H 165* 20 2/6/32 40 2,2 1,6 -6° Neg. TCG 5 296.165.40H 165* 20 2/6/32 56 2,2 1,6 -6° Neg. TCG 5 296.165.56H 180* 20 2/6/32 40 2,8 2,2 -6° Neg. TCG 5 296.180.40H 190* 30 2/7/42 40 2,8 2,2 -6° Neg. TCG 5 296.190.40M 190* 30 2/7/42 64 2,8 2,2 -6° Neg. TCG 5 296.190.64M 190* 20 (Festool® FF) Key 5/7/2,5 64 2,8 2,2 -6° Neg. TCG 5 296.190.64FF 200* 30 COMBI3 48 2,8 2,2 -6° Neg. TCG 5 296.200.48M 210* 30 2/7/42 48 2,8 2,2 -6° Neg. TCG 5 296.210.48M 210* 30 2/7/42 64 2,8 2,2 -6° Neg. TCG 5 296.210.64M 216* 30 2/7/42 64 2,8 2,2 -6° Neg. TCG 5 297.064.09M 216* 30 2/7/42 80 2,8 2,2 -6° Neg. TCG 5 297.080.09M 225* 30 2/7/42 64 2,8 2,2 -6° Neg. TCG 5 296.225.64M 230* 30 2/7/42 48 2,8 2,2 -6° Neg. TCG 5 296.230.48M 235* 30 2/7/42 48 2,8 2,2 -6° Neg. TCG 5 296.235.48M

6

296

8

297

HV10: 1.765N/mm2: 2.150

EXCE

LLEN

T For All Non-FerrousMetals & PVC

GOO

D

Two-Sided Melamine

D mm

ZB mm

K mm


Pin Hole

D mm

ZB mm

K mm


Pin Hole

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



Dry Cutter Saw Blades for Metal Industrial Line

226

P

K

*Non-low noise

ApplicAtion: for crosscutting a variety of materials such as iron, steel, pvc, compound materials, melamine.

MAchines: for “dry” crosscutting a variety of materials and ferrous materials such as iron, steel, pvc, compound materials, melamine.

MAteriAl: for ferrous materials and structural steel. Max Suggested Hardness HB420/HRC45.

WArning: not recommended for non-ferrous metals, wood, glass, con-crete, plastic.

**reMArks: in cardboard box.

136,5* 10 4800 30 1,5 1,2 0° 8° FWF 5 226.030.05 136,5* 20 4800 30 1,5 1,2 0° 8° FWF 5 226.030.05H 150 20 4400 32 1,6 1,2 0° 8° FWF 5 226.032.06H 160 20 2/6/32 4100 30 2,0 1,6 0° 8° FWF 5 226.030.06H 165 15,87<> 4000 36 1,6 1,2 0° 8° FWF 5 226.036.06 165 20 2/6/32 4000 36 1,6 1,2 0° 8° FWF 5 226.036.06H 165 30 2/7/42 4000 36 1,6 1,2 0° 8° FWF 5 226.036.06M 184 15,87<> 3600 48 2,0 1,6 0° 8° FWF 5 226.048.07 190 30 2/7/42 3500 40 2,0 1,6 0° 8° FWF 5 226.040.07M 210 15,87<> 3100 48 2,2 1,8 0° 8° FWF 5 226.048.08 210 30 2/7/42 3100 48 2,2 1,8 0° 8° FWF 5 226.048.08M 216 30 2/7/42 3000 48 2,2 1,8 0° 8° FWF 5 226.047.09M 235 30 2/7/42 2800 48 2,2 1,8 0° 8° FWF 5 226.048.09M 254 15,87 2600 48 2,2 1,8 0° 8° FWF 5 226.048.10 254 15,87 2600 60 2,2 1,8 0° 8° FWF 1 226.060.10 254** 30 COMBI3 2600 60 2,2 1,8 0° 8° FWF 1 226.060.10M 305 25,4 2100 60 2,2 1,8 0° 8° FWF 5 226.060.12 305 25,4 2100 80 2,2 1,8 0° 8° FWF 5 226.080.12 305** 30 COMBI3 2100 80 2,2 1,8 0° 8° FWF 1 226.080.12M 355 25,4 1800 72 2,2 1,8 0° 8° FWF 5 226.072.14 355 25,4 1800 90 2,2 1,8 0° 8° FWF 5 226.090.14 355** 30 COMBI3 1800 90 2,2 1,8 0° 8° FWF 1 226.090.14M

160 20 2/6/32 4100 40 1,8 1,4 0° 8° FWF 1 226.540.06H 184 15,87<> 3600 48 2,0 1,6 0° 8° FWF 1 226.548.07 190 30 2/7/42 3500 48 1,8 1,4 0° 8° FWF 1 226.548.07M 216 30 2/7/42 3000 56 1,8 1,4 0° 8° FWF 1 226.556.09M 250** 30 COMBI3 2600 72 2,2 1,8 0° 8° FWF 1 226.572.10M 254 15,87 2600 72 2,2 1,8 0° 8° FWF 1 226.572.10 300** 30 COMBI3 2200 80 2,2 1,8 0° 8° FWF 1 226.580.12M 305 25,4 2100 80 2,2 1,8 0° 8° FWF 1 226.580.12 355 25,4 1800 90 2,2 1,8 0° 8° FWF 1 226.590.14 355** 30 COMBI3 1800 90 2,2 1,8 0° 8° FWF 1 226.590.14M

**reMArks: in cardboard box.

EXCE

LLEN

T For Iron, Steel, PVC, Compound Materials, Melamine

LONGL I F E

CERMETCARBIDE

5,5

HW Since 1962

HV10: 1.520N/mm2: 2.300

5,5HV10: 1.600N/mm2: 2.000Saw Blades for Stainless Steel

D mm

ZRPM suggested

B mm

K mm


Pin Hole

D mm

ZRPM suggested

B mm

K mm


Pin Hole

SPEC

IAL CARBIDE

CERMET

FOR BEST RESULTS AND LONGER LIFETIME PLEASE USE THE SUGGESTED RPM IN THE CHART

NEW CARBIDE GRADE

MAteriAl: for stainless steel, studs and galvanized stuff. Max Suggested Hardness HB420/HRC45. Since 1962

NEW CERMET GRADE

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



Solid Surface Saw Blades Industrial Line

PVC & Plexiglass Saw Blades Industrial Line

ApplicAtion: for swirl free cuts. MAchines: table saws and panel sizing.MAteriAl: solid surface materials (DuPont™ Corian®, Wilsonart®, Gibraltar®, SSV Fountainhead®, Varicor®, etc.) and thick plastic.WArning: not recommended for use on mitre saws.

223

160 20 2/6/32 48 2,2 1,6 0° MTCG 5 223.048.06H 250 30 COMBI3 72 3,2 2,5 0° MTCG 1 223.072.10M 300 30 COMBI3 84 3,2 2,5 0° MTCG 1 223.084.12M

α

0.4

P

K

P

K

ApplicAtion: for perfect cuts without melting and scratching. MAchines: table saws, panel sizing and mitre saws.MAteriAl: thin plastic, plexiglass, vinyl, plywood, laminated flooring.

222

250 30 COMBI3 80 2,8 2,2 -3° Neg. MATB 1 222.080.10M 300 30 COMBI3 96 2,8 2,2 -3° Neg. MATB 1 222.096.12M

EXCE

LLEN

T Solid Surface Thick Plastic

GOO

D

Plywood Two-Sided Melamine

EXCE

LLEN

T Plexiglass & Vinyl Thin Plastic

HW Since 1962

8

8HV10: 1.950N/mm2: 2.300

HV10: 1.950N/mm2: 2.300

D mm

D mm

Z

Z

B mm

B mm

K mm

K mm

P mm

P mm

α

α

β

β

ORDER NO.

ORDER NO.

Pin Hole

Pin Hole

HW Since 1962

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



A B

K

P

A B A B

β

α

ITK-Plus® Ripping Saw Blades

A B

P

K

A B

β

α

136 20 (+10) 18 1,5 1,0 20° 10° ATB + 8° Shear 10 271.136.18H 150 20 (+16) 24 1,5 1,0 18° 10° ATB + 8° Shear 10 271.150.24H 160 20 (+16) 2/6/32 24 1,8 1,2 18° 10° ATB + 8° Shear 10 271.160.24H 165 20 (+15,87) 2/6/32 24 1,7 1,1 18° 10° ATB + 8° Shear 10 271.165.24H 165 30 2/7/42 24 1,7 1,1 18° 10° ATB + 8° Shear 10 271.165.24M 184 20 (+16+15,87) 2/7/42 24 1,7 1,1 20° 10° ATB + 8° Shear 10 271.184.24H 184 30 2/7/42 24 1,7 1,1 20° 10° ATB + 8° Shear 10 271.184.24M 190 30 (+20+16) 2/7/42 24 1,7 1,1 20° 10° ATB + 8° Shear 10 271.190.24M 200 30 2/7/42 36 1,8 1,2 15° 10° ATB + 8° Shear 10 271.200.36M 210 30 (+25) 2/7/42 24 1,8 1,2 20° 10° ATB + 8° Shear 10 271.210.24M 210 30 (+25) 2/7/42 36 1,8 1,2 15° 10° ATB + 8° Shear 10 271.210.36M 216 30 2/7/42 36 1,8 1,2 -5° Neg. 10° ATB + 8° Shear 10 271.216.36M 235 30 (+25) 2/7/42 36 2,4 1,6 18° 10° ATB + 8° Shear 10 271.235.36M 250 30 COMBI3 42 2,4 1,6 18° 10° ATB + 8° Shear 10 271.250.42M 300 30 COMBI3 48 2,6 1,8 18° 10° ATB + 8° Shear 5 271.300.48M 305 30 COMBI3 48 2,6 1,8 -5° Neg. ATB 5 271.305.48M

ApplicAtion: for rip cuts at high-speed rotation. The blade considerably reduces material waste thanks to the thin-kerf design. Particularly suitable for valuable wood.MAchines: miter saws, table saws, portable and cordless saws.MAteriAl: soft and hardwood.

271

250 30 COMBI3 24 2,4 1,6 20° 10° ATB + 8° Shear 10 271.250.24M 300 30 COMBI3 24 2,6 1,8 22° 10° ATB + 8° Shear 5 271.300.24M

ApplicAtion: for rip and crosscuts at high-speed rotation. The blade considerably reduces material waste thanks to the thin-kerf design. Particularly suitable for valuable wood.MAchines: miter saws, table saws, portable and cordless saws.MAteriAl: soft and hardwood, plywood.

271

ITK-Plus® Rip & Crosscut Saw Blades

®

®

EXCE

LLEN

T Rip Cut on Wood

EXCE

LLEN

T Rip Cut on Wood

GOO

D

Crosscut on Wood

5~6

5~6

HV10: 1.550N/mm2: 2.300

HV10: 1.550N/mm2: 2.300

D mm

ZB mm

K mm


Pin Hole

D mm

ZB mm

K mm


Pin Hole

HW®

HW®

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



ITK-Plus® Crosscut Saw Blades

ApplicAtion: for rip and crosscuts at high-speed rotation. The blade considerably reduces material waste thanks to the thin-kerf design. Particularly suitable for valuable wood.MAchines: miter saws, table saws, portable and cordless saws.MAteriAl: soft and hardwood, plywood.

272

ApplicAtion: for crosscuts and finish cuts. The blade considerably reduces material waste thanks to the thin-kerf design. Particularly suitable for precious wood.MAchines: miter saws, table saws, portable and cordless saws.MAteriAl: soft and hardwood, exotic wood, plywood and laminates.

273

A BABABA

P

K

β

α

160 20 (+16) 2/6/32 56 1,8 1,2 12° 10° ATB + 8° Shear 10 273.160.56H 190 30 (+20+16) 2/7/42 64 1,7 1,1 15° 10° ATB + 8° Shear 10 273.190.64M 216 30 2/7/42 64 1,8 1,2 -5° Neg. 10° ATB + 8° Shear 10 273.216.64M 250 30 COMBI3 80 2,4 1,6 12° 10° ATB + 8° Shear 10 273.250.80M 300 30 COMBI3 96 2,6 1,8 12° 10° ATB + 8° Shear 5 273.300.96M

136 20 (+10) 36 1,5 1,0 18° 10° ATB + 8° Shear 10 272.136.36H 150 20 (+16) 40 1,5 1,0 16° 10° ATB + 8° Shear 10 272.150.40H 160 20 (+16) 2/6/32 40 1,8 1,2 16° 10° ATB + 8° Shear 10 272.160.40H 165 20 (+15,87) 2/6/32 36 1,7 1,1 20° 10° ATB + 8° Shear 10 272.165.36H 184 20 (+16+15,87) 2/7/42 40 1,7 1,1 18° 10° ATB + 8° Shear 10 272.184.40H 184 30 2/7/42 40 1,7 1,1 18° 10° ATB + 8° Shear 10 272.184.40M 190 30 (+20+16) 2/7/42 42 1,7 1,1 18° 10° ATB + 8° Shear 10 272.190.42M 200 30 2/7/42 48 1,8 1,2 15° 10° ATB + 8° Shear 10 272.200.48M 210 30 (+25) 2/7/42 48 1,8 1,2 15° 10° ATB + 8° Shear 10 272.210.48M 216 30 2/7/42 48 1,8 1,2 -5° Neg. 10° ATB + 8° Shear 10 272.216.48M 235 30 (+25) 2/7/42 48 2,4 1,6 18° 10° ATB + 8° Shear 10 272.235.48M 250 30 COMBI3 60 2,4 1,6 15° 10° ATB + 8° Shear 10 272.250.60M 300 30 COMBI3 72 2,6 1,8 15° 10° ATB + 8° Shear 5 272.300.72M 305 30 COMBI3 72 2,6 1,8 -5° Neg. ATB 5 272.305.72M

A BABABA

P

K

β

α

ITK-Plus® Fine Cut-Off Saw Blades

®

®

EXCE

LLEN

T Cut on plywood Crosscut on Wood

EXCE

LLEN

T Crosscut on Wood Cut on plywood Two-sided melamine

5~8

5~8

HV10: 1.840N/mm2: 2.050

HV10: 1.840N/mm2: 2.050

D mm

ZB mm

K mm


Pin Hole

D mm

ZB mm

K mm


Pin Hole

HW®

HW®

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



ITK-Plus® Non-Ferrous Metal & Composite Decking

Garden Trimmer Saw Blades

298ApplicAtion: for cutting grass, bushes and small trees.MAchines: hedge trimmers. MAteriAl: grass, bushes and small trees.WArning: always wear safety glasses and ear protection. Carefully read the safety recommendations provided for this

product.

250 20 12.000 20 2,2 1,4 15° 10° ATB 10 298.250.20H 250 25,4 12.000 20 2,2 1,4 15° 10° ATB 10 298.250.20

HWSECUREDTOOTH

D mm

ZRPM max

B mm

K mm


K

β

P

EXCE

LLEN

T

6HV10: 1.550N/mm2: 2.600

15mt50ft Ø max

5 cm2 in

NOYES

GrassBushes & Small Trees(up to a diameter of Ø5 cm)

HWApplicAtion: for heavy-duty cutting, excellent on thin-walled extrusions, good on thick-walled extrusions.MAchines: radial arm saws, miter saws, table and special saws.MAteriAl: aluminum, brass, copper, PVC, non-ferrous metals and composite decking.

276

EXCE

LLEN

T

7 HV10: 1.765N/mm2: 2.150

160 20 (16) 2/6/32 48 1,8 1,2 -6° Neg. TCG 10 276.160.48H 184 20 (16-15,87) 2/7/42 48 1,8 1,2 -6° Neg. TCG 10 276.184.48H 190 20 (20-16) 2/7/42 64 1,8 1,2 -6° Neg. TCG 10 276.190.64M 210 30 (25) 2/7/42 64 1,8 1,2 -6° Neg. TCG 10 276.210.64M 216 30 2/7/42 64 2,2 1,6 -6° Neg. TCG 10 276.216.64M 250 30 COMBI3 80 2,6 1,8 -6° Neg. TCG 10 276.250.80M 300 30 COMBI3 96 2,8 2,0 -6° Neg. TCG 10 276.300.96M 305 30 COMBI3 96 2,8 2,0 -6° Neg. TCG 10 276.305.96M

D mm

ZB mm

K mm

P mm

α β ORDER NO.Pin Hole

For All Non-FerrousMetal and PVC

Double-Sided Laminate Composite Decking

TREX®TIMBERTECH®

AZEK®VERANDA®

CHOICEDECK®

α K

P

0.3

A BABABA

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



DP Saw Blades for Ultra-Hard Materials

DP

290 HW

P

K

β

α

150 20 12 2,4 1,4 20° 10° ATB 5 290.150.12H 160 16 12 2,2 1,6 20° 10° ATB 5 290.160.12E 160 20 2/6/32 12 2,2 1,6 20° 10° ATB 5 290.160.12H 180 30 2/7/42 12 2,6 1,6 20° 10° ATB 5 290.180.12M 190 16 2/6/32 12 2,6 1,6 20° 10° ATB 5 290.190.12E 190 20 2/6/32 12 2,6 1,6 20° 10° ATB 5 290.190.12H 190 30 2/7/42 12 2,6 1,6 20° 10° ATB 5 290.190.12M 200 30 2/7/42 24 2,8 1,8 20° 10° ATB 5 290.200.24M 210 25 24 2,8 1,8 20° 10° ATB 5 290.210.24L 210 30 2/7/42 24 2,8 1,8 20° 10° ATB 5 290.210.24M 216 30 2/7/42 24 2,8 1,8 -5° Neg. 15° ATB 5 290.216.24M 220 30 2/7/42 24 2,8 1,8 20° 10° ATB 5 290.220.24M 230 30 2/7/42 24 2,8 1,8 20° 10° ATB 5 290.230.24M 235 25 24 2,8 1,8 20° 10° ATB 5 290.235.24L 235 30 2/7/42 24 2,8 1,8 20° 10° ATB 5 290.235.24M 240 30 2/7/42 24 2,8 1,8 20° 10° ATB 5 290.240.24M 250 30 COMBI3 24 2,8 1,8 20° 10° ATB 5 290.250.24M* 260 30 COMBI3 28 2,8 1,8 20° 10° ATB 1 290.260.28M* 270 30 2/7/42 28 2,8 1,8 20° 10° ATB 5 290.270.28M*

236

ApplicAtion: for rip cuts.MAchines: mitre saws and portable machines.MAteriAl: soft and hardwood.

ApplicAtion: for rip and crosscuts on abrasive materials.MAchines: mitre saws, portable and cordless machines.MAteriAl: Eternit®, Swisspearl®, Fermacell®, Ivarplank®, HardiePlank®, HardiePanel®, Corian®, Duroplast®, Formica® and other generic panels such as chipboard, MDF plasterboard and thermoplastic.

Rip Saw Blades for Portable Machines


60X

GOO

D

Eternit®, Swisspearl®, Fermacell®, Ivarplank®, HardiePlank®, HardiePanel®, Corian®, Duroplast®, Formica®, and other generic panel such as chipboard, MDF, plasterboard and thermoplastic.

EXCE

LLEN

T Rip Cut on Wood

* Industrial quality

P

K

85 15 6 1,8 1,4 12° TCG 10 236.085.06G 125 22,23 7 2,0 1,4 5° TCG 10 236.125.07 160 20 2/6/32 4 2,4 1,8 12° TCG 10 236.160.04H 160 20 2/6/32 10 2,4 1,8 5° TCG 10 236.160.10H 165 20 (+15,87) 2/6/32 4 1,8 1,4 12° TCG 10 236.165.04H 165 20 (+15,87) 2/6/32 10 1,8 1,4 5° TCG 10 236.165.10H 180 20 2/6/32 4 2,4 1,8 12° TCG 10 236.180.04H 190 30 2/7/42 4 2,4 1,8 12° TCG 10 236.190.04M 190 30 2/7/42 12 2,4 1,8 12° TCG 10 236.190.12M 210 30 2/7/42 12 2,4 1,8 12° TCG 10 236.210.12M 216 30 2/7/42 14 2,4 1,8 12° TCG 10 236.216.14M 230 30 2/7/42 4 2,4 1,8 12° TCG 10 236.230.04M 250 30 COMBI3 16 2,4 1,8 12° TCG 10 236.250.16M 300 30 COMBI3 20 2,4 1,8 12° TCG 5 236.300.20M

Since 1962

®

6~8HV10: 1.765N/mm2: 2.150

D mm

ZB mm

K mm


Pin Hole

D mm

ZB mm

K mm


Pin Hole

®

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



Crosscut Saw Blades for Portable Machines

ApplicAtion: for rip and crosscuts.MAchines: table and mitre saws, portable machines.MAteriAl: soft and hardwood, plywood.

285-291

α

P

K

β

120 20 2/5,5/30 18 1,8 1,2 15° 15° ATB 5 291.120.18H* 125 20 20 2,4 1,4 15° 15° ATB 5 291.125.20H 130 20 20 2,4 1,4 15° 15° ATB 5 291.130.20H 140 20 20 2,4 1,4 15° 15° ATB 5 291.140.20H 150 16 24 2,4 1,4 15° 15° ATB 5 291.150.24E 150 20 24 2,4 1,4 15° 15° ATB 5 291.150.24H 160 16 24 2,2 1,6 15° 15° ATB 5 291.160.24E 160 20 2/6/32 24 2,2 1,6 15° 15° ATB 5 291.160.24H 160 30 2/7/42 24 2,2 1,6 15° 15° ATB 5 291.160.24M 165 20 2/6/32 24 2,2 1,6 15° 15° ATB 5 291.165.24H 165 30 2/7/42 24 2,6 1,6 15° 15° ATB 5 291.165.24M 170 30 2/7/42 24 2,6 1,6 20° 10° ATB 5 291.170.24M 180 20 2/6/32 24 2,6 1,6 20° 10° ATB 5 291.180.24H 180 30 2/7/42 24 2,6 1,6 20° 10° ATB 5 291.180.24M 184 16 24 2,6 1,6 20° 10° ATB 5 291.184.24E 184 30 24 2,6 1,6 20° 10° ATB 5 291.184.24M 190 16 2/6/32 24 2,6 1,6 20° 10° ATB 5 291.190.24E 190 20 2/6/32 24 2,6 1,6 20° 10° ATB 5 291.190.24H 190 30 2/7/42 24 2,6 1,6 20° 10° ATB 5 291.190.24M 190 20 (Festool® FF) Key 5/7/2,5 32 2,6 1,8 10° 10° ATB 5 291.190.32FF 200 30 2/7/42 36 2,8 1,8 15° 15° ATB 5 291.200.36M 210 25 36 2,8 1,8 15° 15° ATB 5 291.210.36L 210 30 2/7/42 36 2,8 1,8 15° 15° ATB 5 291.210.36M 216 30 2/7/42 48 2,8 1,8 -5° Neg. 15° ATB 5 291.216.48M 220 30 2/7/42 36 2,8 1,8 15° 15° ATB 5 291.220.36M 225 30 2/7/42 36 2,8 1,8 20° 15° ATB 5 291.225.36M 230 30 2/7/42 36 2,8 1,8 15° 15° ATB 5 291.230.36M 235 25 36 2,8 1,8 15° 15° ATB 5 291.235.36L 235 30 2/7/42 36 2,8 1,8 15° 15° ATB 5 291.235.36M 240 30 2/7/42 36 2,8 1,8 15° 15° ATB 5 291.240.36M 250 20 COMBI3 40 3,2 2,2 15° 10° ATB 1 285.040.10H* 250 30 COMBI3 40 3,2 2,2 15° 10° ATB 1 285.040.10M* 260 30 2/10/60 + 2/7/42 48 2,8 1,8 15° 10° ATB 1 285.048.11M* 270 30 2/7/42 42 2,8 1,8 20° 10° ATB 5 291.270.42M*


EXCE

LLEN

T Rip Cut on Wood Crosscut on Wood Rip Cut on Plywood Crosscut on Plywood

6~8 HV10: 1.765N/mm2: 2.150

D mm

ZB mm

K mm


Pin Hole

HW Since 1962

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



Fine Cut-Off Saw Blades for Portable Machines

281-285-292ApplicAtion: for crosscuts, perfect finishing.MAchines: table and mitre saws, portable machines.MAteriAl: soft, hard and exotic wood, wood-based panels, single-sided veneer, paper-based laminates.

α K

β

P

120 20 2/5,5/30 36 1,8 1,2 10° 15° ATB 5 292.120.36H* 120 20 2/5,5/30 40 1,8 1,2 10° 15° ATB 5 292.120.40H 125 20 - 36 2,4 1,4 15° 15° ATB 5 292.125.36H 130 20 - 36 2,4 1,4 15° 15° ATB 5 292.130.36H 140 20 - 36 2,4 1,4 15° 15° ATB 5 292.140.36H 150 20 - 40 2,4 1,4 15° 15° ATB 5 292.150.40H 150 30 2/7/42 48 3,2 2,2 5° 15° ATB 5 285.048.06M* 160 16 - 40 2,2 1,6 10° 15° ATB 5 292.160.40E 160 20 2/6/32 40 2,2 1,6 10° 15° ATB 5 292.160.40H 160 20 (Virutex) 4/7/32 (45°) 40 2,2 1,6 10° TCG 5 281.160.40H* 160 20 2/6/32 40 2,2 1,6 10° TCG 5 281.160.40H2* 160 30 2/7/42 40 2,2 1,6 10° 15° ATB 5 292.160.40M 160 20 2/6/32 48 2,2 1,6 5° 15° ATB 5 285.160.48H 160 20 2/6/32 56 2,2 1,6 15° 15° ATB 5 292.160.56H 165 20 2/6/32 40 2,2 1,6 10° 15° ATB 5 292.165.40H 165 20 2/6/32 56 2,2 1,6 15° 15° ATB 5 292.165.56H 165 30 2/7/42 40 2,6 1,6 10° 15° ATB 5 292.165.40M 170 30 2/7/42 40 2,6 1,6 15° 15° ATB 5 292.170.40M 180 20 2/6/32 40 2,6 1,6 15° 15° ATB 5 292.180.40H 180 30 2/7/42 40 2,6 1,6 15° 15° ATB 5 292.180.40M 180 30 2/7/42 56 3,2 2,2 5° 15° ATB 5 285.056.07M* 184 16 40 2,6 1,6 15° 15° ATB 5 292.184.40E 184 30 40 2,6 1,6 15° 15° ATB 5 292.184.40M 190 16 2/6/32 40 2,6 1,6 15° 15° ATB 5 292.190.40E 190 20 2/6/32 40 2,6 1,6 15° 15° ATB 5 292.190.40H 190 30 2/7/42 40 2,6 1,6 15° 15° ATB 5 292.190.40M 190 30 2/7/42 64 2,6 1,6 15° 15° ATB 5 292.190.64M 190 20 (Festool® FF) 5/7/2,5 48 2,4 1,8 10° 15° ATB 5 292.190.48FF 200 30 2/7/42 48 2,8 1,8 15° 15° ATB 5 292.200.48M 210 25 48 2,8 1,8 15° 15° ATB 5 292.210.48L 210 30 2/7/42 48 2,8 1,8 15° 15° ATB 5 292.210.48M 210 30 2/7/42 64 2,8 1,8 15° 15° ATB 5 292.210.64M 216 30 2/7/42 64 2,8 1,8 -5° Neg. 15° ATB 5 292.216.64M 216 30 2/7/42 80 2,8 1,8 -5° Neg. 15° ATB 5 292.216.80M 220 30 2/7/42 48 2,8 1,8 15° 15° ATB 5 292.220.48M 225 30 2/7/42 48 2,8 1,8 10° 15° ATB 5 292.225.48M 230 30 2/7/42 48 2,8 1,8 15° 15° ATB 5 292.230.48M 230 30 2/7/42+2/10/60 64 2,8 1,8 15° 15° ATB 5 292.230.64M 235 25 48 2,8 1,8 15° 15° ATB 5 292.235.48L 235 30 2/7/42 48 2,8 1,8 15° 15° ATB 5 292.235.48M 240 30 2/7/42 48 2,8 1,8 15° 15° ATB 5 292.240.48M 250 30 COMBI3 60 3,2 2,2 10° 15° ATB 1 285.060.10M* 260 30 2/10/60 + 2/7/42 60 2,8 1,8 10° 15° ATB 5 285.060.11M*

EXCE

LLEN

T Crosscut on Wood


6~8 HV10: 1.765N/mm2: 2.150

D mm

ZB mm

K mm


Pin Hole

HW Since 1962

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



Crosscut K19024M (2pc.) 190 30 2/7/42 24 2,2 1,4 20° 10° ATB Fine cut-off K19040M (1pc.) 190 30 2/7/42 40 2,2 1,4 15° 10° ATB

MAchines: portable benchtop and table saws.MAteriAl: soft/hard wood, plywood, OSB panels.

Designed for construction, remodeling and DIY projects. These blades deliver solid performance at a very economical price.

K (CMT Contractor Tools®)

Wood PlywoodOSBα K

β

P

D mmDescriPtion

ZB mm

K mm


Fine cut-off (clamshell) 85 15 24 1,1 0,7 12° 5° ATB 10 K02403 Crosscut (pack 10 blades) 136 20 18 1,5 1,0 15° 15° ATB 5 K13618H-X10 Fine cut-off (pack 10 blades) 160 20 2/6/32 24 2,2 1,4 15° 15° ATB 5 K16024H-X10 Crosscut (pack 10 blades) 160 20 2/6/32 40 2,2 1,4 10° 15° ATB 5 K16040H-X10 Crosscut (pack 10 blades) 165 20 2/6/32 24 1,7 1,1 15° 15° ATB 5 K16524H-X10 Crosscut (pack 10 blades) 190 30 2/7/42 24 2,2 1,4 20° 10° ATB 5 K19024M-X10 Crosscut (pack 10 blades) 216 30 2/7/42 24 2,4 1,6 -5° Neg. 15° ATB 5 K21624M-X10 Crosscut (pack 10 blades) 216 30 2/7/42 48 2,4 1,6 -5° Neg. 15° ATB 5 K21648M-X10 Crosscut (pack 5 blades) 250 30 COMBI3 40 2,6 1,8 15° 10° ATB 5 K25040M-X05

HW

EXCE

LLEN

T

Kit 10 pcs.

CMT Contractor Tools® Saw Blade Masterpack

Pin Hole

CMT Contractor Tools® Saw Blade Combo

D mm

D mm

D mm

D mm

D mm

DescriPtion

DescriPtion

DescriPtion

DescriPtion

DescriPtion

set contains orDer no.





Z

Z

Z

Z

Z

B mm

B mm

B mm

B mm

B mm

K mm

K mm

K mm

K mm

K mm

P mm

P mm

P mm

P mm

P mm

α

α

α

α

α

β

β

β

β

β

Crosscut K16024H (1pc.) 160 20 2/6/32 24 2,2 1,4 15° 15° ATB Fine cut-off K16040H (2pc.) 160 20 2/6/32 40 2,2 1,4 10° 15° ATB

Crosscut K21624M (1pc.) 216 30 2/7/42 24 2,4 1,6 -5° Neg. 15° ATB Fine cut-off K21648M (2pc.) 216 30 2/7/42 48 2,4 1,6 -5° Neg. 15° ATB

Rip K25024M (1pc.) 250 30 COMBI3 24 2,6 1,8 20° 10° ATB Crosscut K25040M (1pc.) 250 30 COMBI3 40 2,6 1,8 15° 10° ATB

Crosscut K30540M (1pc.) 305 30 COMBI3 40 2,8 2,0 -5° Neg. 10° ATB Fine cut-off K30560M (1pc.) 305 30 COMBI3 60 2,8 2,0 -5° Neg. 10° ATB

Pin Hole

Pin Hole

Pin Hole

Pin Hole

Pin Hole

K160H-X03 3-pc Set for Crosscut & Fine Cut Circular Saw Blades Ø160mm. Bore 20mm. MasterPacK 10

K216M-X03 3-pc Set for Crosscut & Fine Cut Circular Saw Blades Ø216mm. Bore 30mm. MasterPacK 10

K250M-X02 2-pc Set for Rip & Crosscut Circular Saw Blades Ø250mm. Bore 30mm. MasterPacK 10



MAchines: portable benchtop and table saws.MAteriAl: soft/hard wood, plywood, OSB panels.

Designed for construction, remodeling and DIY projects. These blades deliver solid performance at a very economical price.

K (CMT Contractor Tools®) HW

GREATVALUE

GREATVALUE

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



Dado Saw Blades

22,2317,4615,8815,08 16,67 19,8418,26 19,05 21,4320,64

10,329,538,73 14,2912,7011,11 11,91 13,496,35 7,94

P (inside blades) 3,2mm 2,4mm 1,6mm

K min. max

D mm

B mm

Z

α ORDER NO.β

HW230

P (inside blades) 3,2mm 1,6mm

K min. max

D mm

B mm

Z α ORDER NO.β

200 15,87 12 4 pcs. 1 pcs. 6,35 20,64 -12° Neg. FTG+ATB 5 230.012.08

150 15,87 20 4 pcs. 1 pcs. 1 pcs. 6,35 22,23 -5° Neg. FTG+ATB 3 230.520.06 200 15,87 24 4 pcs. 1 pcs. 1 pcs. 6,35 22,23 -5° Neg. FTG+ATB 3 230.524.08 200 30 24 4 pcs. 1 pcs. 1 pcs. 6,35 22,23 -5° Neg. FTG+ATB 3 230.524.08M

12,706,35 7,94 11,119,53 19,0515,8814,29 17,46 20,64

K

Precise cutsfor accurate fitting dado-groove joints.

CMT thoroughly researched the shortcomings of “standard” dado sets and learned what cabinet makers required most from an “ideal” dado. The result was the superior CMT precision dado, designed with the following features:- anti-kickback design to reduce the possibility of overfeeding

that can occur when cutting mass material.- splinter resistant cuts in veneer plywood, melamine and hard

and soft woods; - shim sets included for cuts between 6,35mm (1/4”) and 22,23mm (7/8”).

Kmm

Number of required inside blades 1,6mm 2,4mm 3,2mm

6,35 0 0 0 7,94 1 0 0 8,73 0 1 0 9,53 0 0 1 10,32 1 1 0 11,11 1 0 1 11,91 0 1 1 12,70 0 0 2 13,49 1 1 1 14,29 1 0 2 15,08 0 1 2 15,88 0 0 3 16,67 1 1 2 17,46 1 0 3 18,26 0 1 3 19,05 0 0 4 19,84 1 1 3 20,64 1 0 4 21,43 0 1 4 22,23 1 1 4

Kmm

Number of required inside blades 1,6mm 3,2mm

6,35 0 0 7,94 1 0 9,53 0 1 11,11 1 1 12,70 0 2 14,29 1 2 15,88 0 3 17,46 1 3 19,05 0 4 20,64 1 4

2 BLADES

Shims set contains No. Shim Width

4 0.1mm 2 0.2mm 2 0.3mm 2 0.5mm6 CARBIDE TIPPED FOUR

TOOTH CHIPPERS SHIM SET

Precision Dado set includes:

Saw bladeright

Saw bladeleft

ChippersK

P

2 BLADES SHIM SET

Shims set contains No. Shim Width

3 0.1mm 2 0.2mm 1 0.3mm 1 0.5mm5 CARBIDE TIPPED TWO

TOOTH CHIPPERS

Dado Pro set includes:

Saw bladeleft

ChippersK

P

Saw bladeright

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



240

K

P

150 30 12 2,0 1,4 15° FLAT 1 240.020.06M 150 35 12 2,0 1,4 15° FLAT 1 240.020.06R 150 30 12 3,0 2,0 15° FLAT 1 240.030.06M 150 35 12 3,0 2,0 15° FLAT 1 240.030.06R 150 30 12 4,0 3,0 15° FLAT 1 240.040.06M 150 35 12 4,0 3,0 15° FLAT 1 240.040.06R 150 30 12 5,0 3,0 15° FLAT 1 240.050.06M 150 35 12 5,0 3,0 15° FLAT 1 240.050.06R 150 30 12 6,0 3,0 15° FLAT 1 240.060.06M 150 35 12 6,0 3,0 15° FLAT 1 240.060.06R 180 30 18 3,0 2,0 15° FLAT 1 240.030.07M 180 35 18 3,0 2,0 15° FLAT 1 240.030.07R 180 30 18 4,0 3,0 15° FLAT 1 240.040.07M 180 35 18 4,0 3,0 15° FLAT 1 240.040.07R 180 30 18 5,0 3,0 15° FLAT 1 240.050.07M 180 35 18 5,0 3,0 15° FLAT 1 240.050.07R 180 30 18 6,0 3,0 15° FLAT 1 240.060.07M 180 35 18 6,0 3,0 15° FLAT 1 240.060.07R

ApplicAtion: for grooving cuts or for rebating, chamfering, grooving and profiling as a set of tools.MAchines: double-end tenoners and moulding machines.MAteriAl: soft and hardwood, wood-based panels, plastic.

The new design allows multi-rip grooves using different kerf thickness.

Grooving Saw Blades Industrial Line

EXCE

LLEN

T Grooving

HW Since 1962

6 HV10: 1.840N/mm2: 2.050

D mm

ZB mm

K mm


ApplicAtion: for grooving cuts and rebating. MAchines: double-ended tenoners and moulding and

CNC machines.MAteriAl: soft and hardwood and wood-based panels.

240

EXCE

LLEN

T Groovingα K

β

P

HW Since 1962

20

183.410.30

HSK

183.420.30

Suitable for these CNC chucks

Grooving Saw Blades Industrial Line

150 30 4/6,5 - 12/48 36 3 2,2 5° 5°ATB 1 240.150.030M 150 30 4/6,5 - 12/48 36 4 3,0 5° 5°ATB 1 240.150.040M 150 30 4/6,5 - 12/48 36 5 3,0 5° 5°ATB 1 240.150.050M 150 30 4/6,5 - 12/48 36 6 3,0 5° 5°ATB 1 240.150.060M

D mm

ZB mm

K mm

P mm

α β ORDER NO.Pin Hole

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



CMT’s 100mm biscuit joiner saw blades featuring our trademark orange PTFE industrial coating make biscuit joints quickly and easily. These blades fit the most popular biscuit joint models on the market such as Lamello®, Dewalt®, Porter-Cable®, Skil®, Bosch®, Freud®.

240-241

®

EXCE

LLEN

T

β

FLAT ATB

K

P

K

P

HW

Grooving Saw Blades

DP

2 3 4

10

7

K

P

Biscuit Joiner Saw Blades

240ApplicAtion: P-System for connecting fittings. The connecting fitting is a preferred solution for open shelf units, large pieces of

furniture and angled counters, and a popular choice as a general glueing aid for a variety of angles. Frequently used as a visually appealing and premium quality solid joint for high-end products.

- Knock down fitting for furniture, shelf units, fitted wardrobes, kitchen manufacturing etc.; - Glueing aid for mitres and 45° angles; - Connecting fittings for removable elements in trade booth construction and shopfitting projects; - Great alternative to standard connecting fittings; - Quick and easy prototype construction prior to launch of new furniture range; - On-site adjustments and assembly.

MacHines

Lamello® Zeta P2

CNC machines

1

®

Pin HoleD mm

Z K mm

P mm

α βB mm

teetHMaterial MacHine ORDER NO.

100,4 22 DP Zeta P2 4/4,5 - 9,5/36 3 7 4 20° TCG 1 240.601.04 100,4 30 DP CNC 4/6,6 - 12/48 3 7 4 20° TCG 1 240.601.04M 100,4 30 HW CNC 4/6,6 - 12/48 6 7 4 20° TCG 1 240.001.04*

* PTFE Coated

100 22 4/4,5 - 9,5/36 6 3,96 3,0 18° 10°ATB 10 240.006.04 100 22 4/4,5 - 9,5/36 8 3,96 3,0 15° 10°ATB 10 240.008.04 100* 22 - 8 3,96 3,1-3,8 15° FLAT 10 241.008.04

* For Virutex® Machines

D mm

ZB mm

K mm


Pin Hole

HW

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



PBD

Reduction Rings for Saw Blades299

If you’re looking for fast and easy saw alignment and balancing, the cut cali-bration and sanding disk is for you. First, mount your calibration and sanding disk in your table saw and line it up with a square for accuracy. Then, remove the calibration and sanding disk and mount your saw blade for true precise cuts. You can also use the calibration and sanding disk as a sander by simply attaching self-stick sandpaper and installing the disk in your table saw.

ORDER NO.

200 15,87 2,8 10 299.111.00 200 30 2,8 10 299.111.00M 250 15,87 2,8 10 299.112.00 250 30 2,8 10 299.112.00M

D mm

B mm

P mm

Saw Blades Stabilizers

Calibration & Sanding Disks

D mmDescriPtion ORDER NO.B

mmP

mm

Stabilizer (2 pcs.) for Ø200mm 75 15,87 3,0 5 299.101.00 Stabilizer (2 pcs.) for Ø200mm 75 30 3,0 5 299.101.00M Stabilizer (2 pcs.) for Ø250mm 125 15,87 3,0 5 299.102.00 Stabilizer (2 pcs.) for Ø250mm 125 30 3,0 5 299.102.00M Stabilizer (2 pcs.) for Ø300mm 152 25,4 3,0 5 299.103.00 Stabilizer (2 pcs.) for Ø300mm 152 30 3,0 5 299.103.00M

The CMT blade stabilizer virtually eliminates rim vibration to make cleaner, straighter cuts and extend the life of your CMT saw blade. It also helps lessen noise caused by vibration during cutting. note: for use on stationary saws only. Each order includes 2 stabilizers.

299.10

Circular Saw Blade for Patch Work & Repair

299.11

D mm

D mm

B mm

B mm

P mm

P mm ORDER NO. ORDER NO.

15,87 10 1,2 10 299.218.00 15,87 12,7 1,2 10 299.217.00 20 12,7 1,2 10 299.221.00 20 15,87 1,4 10 299.243.00 20 16 1,2 10 299.222.00 20 18 1,4 10 299.236.00 22,2 15 1,4 10 299.237.00 22,2 16 1,4 10 299.242.00 22,2 20 1,4 10 299.238.00 25,4 15,87 1,4 10 299.216.00 25,4 19,05 1,4 10 299.213.00 25,4 20 1,4 10 299.214.00 25,4 20 2,3 10 299.220.00 25,4 22 1,4 10 299.215.00 25,4 22,2 1,4 10 299.239.00 25,4 22,2 2,3 10 299.219.00

30 15 1,4 10 299.240.00 30 15,87 1,4 10 299.211.00 30 16 1,4 10 299.223.00 30 16 2,0 10 299.226.00 30 18 1,4 10 299.232.00 30 19,05 1,4 10 299.241.00 30 20 1,4 10 299.224.00 30 22 1,4 10 299.231.00 30 20 2,0 10 299.227.00 30 25 1,4 10 299.225.00 30 25 2,0 10 299.228.00 30 25,4 2,0 10 299.212.00 32 30 2,0 10 299.229.00 35 30 2,0 10 299.230.00 35 32 2,0 10 299.233.00

HW Since 1962

K

P

R30

The CMT circular saw blade for patch work and repair is ideal for any tyoe of repair work required on solid wood. Resin, knots and other unsightly wood defects are no longer a problem. Cut points using original patches remain practically invisible because wood and patch grains will match up perfectly. For use with Lamello® and other machines designed for patch work and repair.

240.004.04

100 22 Fit Lamello® 4 8,0 6,0 18° R30 10 240.004.04

®

D mm

ZB mm MacHine K

mmP

mm α β ORDER NO.

®

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



Saw Blade Index

70 20 Two-Sided Melamine 8+8 2,8-3,6 12° FLAT 289.070.16H 23 80 20 Two-Sided Melamine 12 3,1-4,0 2,2 10° CO+FTG S288.080.12H 24 80 20 Two-Sided Melamine 10+10 2,8-3,6 12° FLAT 289.080.20H 23 85 15 Wood 24 1,1 0,7 12° 15° ATB K02403 36 85 15 Abrasive Materials 6 1,8 1,4 12° TCG 236.085.06G 33 100 20 Two-Sided Melamine 20 3,1-4,0 2,5 5° CO+5° ATB 288.100.20H 24 100 20 Two-Sided Melamine 10+10 2,8-3,6 12° FLAT 289.100.20H 23 100 20 Two-Sided Melamine 10+10 2,8-3,6 11° ATB 289.700.20H 23 100 22 Grooving 4 8 6 18° R30 240.004.04 39 100 22 Grooving 6 3,96 3 18° 10°ATB 240.006.04 38 100 22 Grooving 8 3,96 3 15° 10°ATB 240.008.04 38 100 22 Grooving 8 3,96 3,1-3,8 15° FLAT 241.008.04 38 100 22 Two-Sided Melamine 20 3,1-4,0 2,5 5° CO+5° ATB 288.100.20K 24 100 22 Two-Sided Melamine 10+10 2,8-3,6 12° FLAT 289.100.20K 23 100,4 22 Grooving 3 7 4 20° TCG 240.601.04 39 100,4 30 Grooving 3 7 4 20° TCG 240.601.04M 39 100,4 30 Grooving 6 7 4 20° TCG 240.001.04 39 120 20 Wood & Plywood 18 1,8 1,2 15° 15° ATB 291.120.18H 34 120 20 Two-Sided Melamine 20 3,1-3,7 5° CONICAL 238.120.20H 22 120 20 Two-Sided Melamine 24 3,1-4,0 2,5 5° CO+5° ATB 288.120.24H 24 120 20 Two-Sided Melamine 24 3,4-4,2 2,5 5° CO+5° ATB 288.120.24H1 24 120 20 Two-Sided Melamine 24 3,1-4,3 2,2 0° CO+6° ATB 288.720.24H 24 120 20 Wood & Derivatives 36 1,8 1,2 10° 15° ATB 292.120.36H 35 120 20 Aluminium 36 1,8 1,2 -6° Neg. TCG 296.120.36H 27 120 20 Wood & Derivatives 40 1,8 1,2 10° 15° ATB 292.120.40H 35 120 20 Two-Sided Melamine 12+12 2,8-3,6 12° FLAT 289.120.24H 23 120 20 Two-Sided Melamine 12+12 2,8-3,6 11° 5° ATB 289.720.24H 23 120 22 Two-Sided Melamine 24 3,1-4,0 2,5 5° CO+5° ATB 288.120.24K 24 120 22 Two-Sided Melamine 24 3,1-4,3 2,2 0° CO+6° ATB 288.720.24K 24 120 22 Two-Sided Melamine 12+12 2,8-3,6 12° FLAT 289.120.24K 23 120 22 Two-Sided Melamine 12+12 2,8-3,6 11° 5° ATB 289.720.24K 23 120 50 Two-Sided Melamine 12+12 2,8-3,6 12° FLAT 289.120.24T 23 125 20 Two-Sided Melamine 20 3,1-3,7 5° CONICAL 238.125.20H 22 125 20 Wood & Plywood 20 2,4 1,4 15° 15° ATB 291.125.20H 34 125 20 Two-Sided Melamine 24 3,1-4,0 2,5 5° CO+5° ATB 288.125.24H 24 125 20 Two-Sided Melamine 24 3,4-4,2 2,5 5° CO+5° ATB 288.125.24H1 24 125 20 Two-Sided Melamine 24 4,3-5,5 3,2 10° CO+FTG 288.125.24H2 24 125 20 Two-Sided Melamine 24 3,1-4,3 2,2 0° CO+6° ATB 288.725.24H 24 125 20 Wood & Derivatives 36 2,4 1,4 15° 15° ATB 292.125.36H 35 125 20 Two-Sided Melamine 12+12 2,8-3,6 12° FLAT 289.125.24H 23 125 20 Two-Sided Melamine 12+12 2,8-3,6 11° 5° ATB 289.725.24H 23 125 22 Two-Sided Melamine 24 3,1-4,0 2,5 5° CO+5° ATB 288.125.24K 24 125 22 Two-Sided Melamine 12+12 2,8-3,6 12° FLAT 289.125.24K 23 125 22,23 Abrasive Materials 7 2,0 1,4 5° TCG 236.125.07 33 125 45 Two-Sided Melamine 24 4,3-5,5 3,2 10° CO+FTG 288.125.24Q 24 130 20 Wood & Plywood 20 2,4 1,4 15° 15° ATB 291.130.20H 34 130 20 Wood & Derivatives 36 2,4 1,4 15° 15° ATB 292.130.36H 35 136 20 Wood 18 1,5 1 15° 15° ATB K13618H-X10 36 136 20 (+10) Wood 18 1,5 1 20° 10° ATB + 8° Shear 271.136.18H 30, 32 136 20 (+10) Wood & Plywood 36 1,5 1 18° 10° ATB + 8° Shear 272.136.36H 31 136,5 10 Metal & Steel 30 1,5 1,2 0° 8° FWF 226.030.05 28, 32 136,5 20 Metal & Steel 30 1,5 1,2 0° 8° FWF 226.030.05H 28, 32 140 16 Two-Sided Melamine 24 3,1-4,0 2,2 10° CO+FTG Y288.140.24E 24 140 20 Wood & Plywood 20 2,4 1,4 15° 15° ATB 291.140.20H 34 140 20 Wood & Derivatives 36 2,4 1,4 15° 15° ATB 292.140.36H 35 150 15,87 Grooving & Dado 20 6,35-22,23 3,2-2,4-1,6 -5° Neg. FTG+ATB 230.520.06 37 150 16 Wood & Plywood 24 2,4 1,4 15° 15° ATB 291.150.24E 34 150 20 Wood 12 2,4 1,4 20° 10° ATB 290.150.12H 33 150 20 Wood & Plywood 24 2,4 1,4 15° 15° ATB 291.150.24H 34 150 20 Metal & Steel 32 1,6 1,2 0° 8° FWF 226.032.06H 28 150 20 Wood & Derivatives 40 2,4 1,4 15° 15° ATB 292.150.40H 35 150 30 Grooving 12 2 1,4 15° FLAT 240.020.06M 38 150 30 Grooving 12 3 2 15° FLAT 240.030.06M 38 150 30 Grooving 12 4 3 15° FLAT 240.040.06M 38 150 30 Grooving 12 5 3 15° FLAT 240.050.06M 38 150 30 Grooving 12 6 3 15° FLAT 240.060.06M 38 150 30 Wood & Derivatives 48 3,2 2,2 5° 15° ATB 285.048.06M 13 150 30 Grooving 36 3 2,2 5° 5° ATB 240.150.030M 38 150 30 Grooving 36 4 3 5° 5° ATB 240.150.040M 38

D mm ORDER NO.β Page

B mm

Z K mm

P mm αMaterials/aPPlication

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



Saw Blade IndexD

mm ORDER NO.β PageB

mmZ K

mmP

mm αMaterials/aPPlication

150 30 Grooving 36 6 3 5° 5° ATB 240.150.060M 38 150 35 Grooving 12 2 1,4 15° FLAT 240.020.06R 38 150 35 Grooving 12 3 2 15° FLAT 240.030.06R 38 150 35 Grooving 12 4 3 15° FLAT 240.040.06R 38 150 35 Grooving 12 5 3 15° FLAT 240.050.06R 38 150 35 Grooving 12 6 3 15° FLAT 240.060.06R 38 150 45 Two-Sided Melamine 36 4,3-5,5 3,2 10° CO+FTG 288.150.36Q 24 150 20 (+16) Wood 24 1,5 1 18° 10° ATB + 8° Shear 271.150.24H 30 150 20 (+16) Wood & Plywood 40 1,5 1 16° 10° ATB + 8° Shear 272.150.40H 31 160 16 Wood 12 2,2 1,6 20° 10° ATB 290.160.12E 33 160 16 Wood & Plywood 24 2,2 1,6 15° 15° ATB 291.160.24E 34 160 16 Wood & Derivatives 40 2,2 1,6 10° 15° ATB 292.160.40E 35 160 20 Abrasive Materials 4 2,4 1,8 12° TCG 236.160.04H 33 160 20 Abrasive Materials 10 2,4 1,8 5° TCG 236.160.10H 33 160 20 Wood 12 2,2 1,6 20° 10° ATB 290.160.12H 33 160 20 Multi-Materials 20 2,2 1,6 10° HR 235.160.20H 21 160 20 Aluminium 24 2,2 1,6 5° TCG 284.160.24H 26 160 20 Wood & Plywood 24 2,2 1,6 15° 15° ATB 291.160.24H 34 160 20 Wood 24 2,2 1,4 15° 15° ATB K16024H 36 160 20 Wood 24 2,2 1,4 15° 15° ATB K16024H-X10 36 160 20 Wood & Derivatives 28 2,2 1,6 15° 10° ATB 285.160.28H 12 160 20 Metal & Steel 30 2 1,6 0° 8° FWF 226.030.06H 28 160 20 Two-Sided Melamine 34 2,6 1,8 10° HDF 287.034.06H 18 160 20 Stainless Steel 40 1,8 1,4 10° 8° FWF 226.540.06H 28 160 20 Wood & Derivatives 40 2,2 1,6 10° 15° ATB 292.160.40H 35 160 20 Aluminium 40 2,2 1,6 -6° Neg. TCG 296.160.40H 27 160 20 Wood 40 2,2 1,4 10° 15° ATB K16040H 36 160 20 Wood 40 2,2 1,4 10° 15° ATB K16040H-X10 36 160 20 Wood & Derivatives 48 2,2 1,6 5° 15° ATB 285.160.48H 13 160 20 Solid Surface 48 2,2 1,6 0° MTCG 223.048.06H 29 160 20 Two-Sided Melamine 48 2,2 1,6 10° TCG 281.160.48H 19 160 20 Two-Sided Melamine 56 2,2 1,6 -3° Neg. TCG 281.161.56H 19 160 20 Wood & Derivatives 56 2,2 1,6 15° 15° ATB 292.160.56H 35 160 20 Aluminium 56 2,2 1,6 -6° Neg. TCG 296.160.56H 27 160 30 Wood & Plywood 24 2,2 1,6 15° 15° ATB 291.160.24M 34 160 30 Wood & Derivatives 40 2,2 1,6 10° 15° ATB 292.160.40M 35 160 45 Two-Sided Melamine 36 4,3-5,5 3,2 10° CO+FTG 288.160.36Q 24 160 55 Two-Sided Melamine 36 4,3-5,5 3,2 10° CO+FTG 288.160.36O 24 160 55 Two-Sided Melamine 36 4,7-6,0 3,5 10° CO+FTG Y288.160.36O2 24 160 20 (+16) Wood 24 1,8 1,2 18° 10° ATB + 8° Shear 271.160.24H 30 160 20 (+16) Wood & Plywood 40 1,8 1,2 16° 10° ATB + 8° Shear 272.160.40H 31 160 20 (+16) Aluminium & Melamine 48 1,8 1,2 -6° Neg. TCG 276.160.48H 32 160 20 (+16) Wood & Derivatives 56 1,8 1,2 12° 10° ATB + 8° Shear 273.160.56H 31 160 20 (Virutex) Two-Sided Melamine 40 2,2 1,6 10° TCG 281.160.40H 20 165 20 Wood & Plywood 24 2,2 1,6 15° 15° ATB 291.165.24H 34 165 20 Wood 24 1,7 1,1 15° 15° ATB K16524H-X10 36 165 20 Metal & Steel 36 1,6 1,2 0° 8° FWF 226.036.06H 28 165 20 Wood & Derivatives 40 2,2 1,6 10° 15° ATB 292.165.40H 35 165 20 Aluminium 40 2,2 1,6 -6° Neg. TCG 296.165.40H 27 165 20 Wood & Derivatives 56 2,2 1,6 15° 15° ATB 292.165.56H 35 165 20 Two-Sided Melamine 56 2,2 1,6 -3° Neg. TCG 281.166.56H 19 165 20 Aluminium 56 2,2 1,6 -6° Neg. TCG 296.165.56H 27 165 30 Wood 24 1,7 1,1 18° 10° ATB + 8° Shear 271.165.24M 30, 32 165 30 Wood & Plywood 24 2,6 1,6 15° 15° ATB 291.165.24M 34 165 30 Metal & Steel 36 1,6 1,2 0° 8° FWF 226.036.06M 28 165 30 Wood & Derivatives 40 2,6 1,6 10° 15° ATB 292.165.40M 35 165 15,87<> Metal & Steel 36 1,6 1,2 0° 8° FWF 226.036.06 28, 32 165 20 (+15,87) Abrasive Materials 4 1,8 1,4 12° TCG 236.165.04H 33 165 20 (+15,87) Abrasive Materials 10 1,8 1,4 5° TCG 236.165.10H 33 165 20 (+15,87) Wood 24 1,7 1,1 18° 10° ATB + 8° Shear 271.165.24H 30, 32 165 20 (+15,87) Wood & Plywood 36 1,7 1,1 20° 10° ATB + 8° Shear 272.165.36H 30, 32 170 30 Wood & Plywood 24 2,6 1,6 20° 10° ATB 291.170.24M 34 170 30 Wood & Derivatives 40 2,6 1,6 15° 15° ATB 292.170.40M 35 180 20 Abrasive Materials 4 2,4 1,8 12° TCG 236.180.04H 33 180 20 Wood & Plywood 24 2,6 1,6 20° 10° ATB 291.180.24H 34 180 20 Two-Sided Melamine 36 4,3-5,5 3,2 10° CO+FTG Y288.180.36H 24 180 20 Wood & Derivatives 40 2,6 1,6 15° 15° ATB 292.180.40H 35 180 20 Aluminium 40 2,8 2,2 -6° Neg. TCG 296.180.40H 27 180 30 Wood 12 2,6 1,6 20° 10° ATB 290.180.12M 33

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



Saw Blade IndexD


mmZ K

mmP


180 30 Grooving 18 3 2 15° FLAT 240.030.07M 38 180 30 Grooving 18 4 3 15° FLAT 240.040.07M 38 180 30 Grooving 18 5 3 15° FLAT 240.050.07M 38 180 30 Grooving 18 6 3 15° FLAT 240.060.07M 38 180 30 Wood & Plywood 24 2,6 1,6 20° 10° ATB 291.180.24M 34 180 30 Two-Sided Melamine 36 4,4-5,3 3,2 10° CO+FTG 288.180.36M 24 180 30 Wood & Derivatives 40 2,6 1,6 15° 15° ATB 292.180.40M 35 180 30 Wood & Derivatives 56 3,2 2,2 5° 15° ATB 285.056.07M 13 180 35 Grooving 18 3 2 15° FLAT 240.030.07R 38 180 35 Grooving 18 4 3 15° FLAT 240.040.07R 38 180 35 Grooving 18 5 3 15° FLAT 240.050.07R 38 180 35 Grooving 18 6 3 15° FLAT 240.060.07R 38 180 40 Multi-Rip 21+3 2,5 1,8 18° FLAT 280.021.07S 10 180 45 Two-Sided Melamine 36 4,8-5,6 3,5 10° CO+FTG 288.180.36Q 24 180 45 Two-Sided Melamine 36 4,3-5,5 3,2 8° CO+5° ATB 288.180.36Q2 24 180 50 Two-Sided Melamine 44 4,3-5,5 3,2 10° CO+FTG 288.180.44T 24 180 55 Two-Sided Melamine 36 5,0-6,2 3,5 10° CO+FTG 288.180.36O 24 184 16 Wood & Plywood 24 2,6 1,6 20° 10° ATB 291.184.24E 34 184 16 Wood & Derivatives 40 2,6 1,6 15° 15° ATB 292.184.40E 35 184 30 Wood 24 1,7 1,1 20° 10° ATB + 8° Shear 271.184.24M 30 184 30 Wood & Plywood 24 2,6 1,6 20° 10° ATB 291.184.24M 34 184 30 Wood & Plywood 40 1,7 1,1 18° 10° ATB + 8° Shear 272.184.40M 31 184 30 Wood & Derivatives 40 2,6 1,6 15° 15° ATB 292.184.40M 35 184 15,87<> Metal & Steel 48 2 1,6 0° 8° FWF 226.048.07 28 184 15,87<> Stainless Steel 48 2 1,6 10° 8° FWF 226.548.07 28 184 20 (+16+15,87) Wood 24 1,7 1,1 20° 10° ATB + 8° Shear 271.184.24H 30, 32 184 20 (+16+15,87) Wood & Plywood 40 1,7 1,1 18° 10° ATB + 8° Shear 272.184.40H 30, 32 184 20 (+16+15,87) Aluminium & Melamine 48 1,8 1,2 -6° Neg. TCG 276.184.48H 32 190 16 Wood 12 2,6 1,6 20° 10° ATB 290.190.12E 33 190 16 Wood & Plywood 24 2,6 1,6 20° 10° ATB 291.190.24E 34 190 16 Wood & Derivatives 40 2,6 1,6 15° 15° ATB 292.190.40E 35 190 20 Wood 12 2,6 1,6 20° 10° ATB 290.190.12H 33 190 20 Wood & Plywood 24 2,6 1,6 20° 10° ATB 291.190.24H 34 190 20 Wood & Derivatives 40 2,6 1,6 15° 15° ATB 292.190.40H 35 190 30 Abrasive Materials 4 2,4 1,8 12° TCG 236.190.04M 33 190 30 Abrasive Materials 12 2,4 1,8 12° TCG 236.190.12M 33 190 30 Wood 12 2,6 1,6 20° 10° ATB 290.190.12M 33 190 30 Multi-Materials 24 2,5 2 10° HR 235.190.24M 21 190 30 Wood & Plywood 24 2,6 1,6 20° 10° ATB 291.190.24M 34 190 30 Wood 24 2,2 1,4 20° 10° ATB K19024M 36 190 30 Wood 24 2,2 1,4 20° 10° ATB K19024M-X10 36 190 30 Aluminium 30 2,6 2,2 5° TCG 284.190.30M 26 190 30 Metal & Steel 40 2 1,6 0° 8° FWF 226.040.07M 28 190 30 Wood & Derivatives 40 2,6 1,6 15° 15° ATB 292.190.40M 35 190 30 Aluminium 40 2,8 2,2 -6° Neg. TCG 296.190.40M 27 190 30 Wood 40 2,2 1,4 15° 10° ATB K19040M 36 190 30 Stainless Steel 48 1,8 1,4 10° 8° FWF 226.548.07M 28 190 30 Wood & Derivatives 64 2,6 1,6 15° 15° ATB 292.190.64M 35 190 30 Aluminium 64 2,8 2,2 -6° Neg. TCG 296.190.64M 27 190 20 (Festool® FF) Wood & Plywood 32 2,6 1,8 10° 10° ATB 291.190.32FF 34 190 20 (Festool® FF) Wood & Derivatives 48 2,4 1,8 10° 15° ATB 292.190.48FF 35 190 20 (Festool® FF) Two-Sided Melamine 54 2,6 1,8 4° TCG 281.190.54FF 19 190 20 (Festool® FF) Aluminium 64 2,8 2,2 -6° Neg. TCG 296.190.64FF 27 190 20 (+20+16) Aluminium & Melamine 64 1,8 1,2 -6° Neg. TCG 276.190.64M 32 190 30 (+20+16) Wood 24 1,7 1,1 20° 10° ATB + 8° Shear 271.190.24M 30 190 30 (+20+16) Wood & Plywood 42 1,7 1,1 18° 10° ATB + 8° Shear 272.190.42M 31 190 30 (+20+16) Wood & Derivatives 64 1,7 1,1 15° 10° ATB + 8° Shear 273.190.64M 31 200 15,87 Grooving & Dado 12 3,2-1,6 6,35-20,64 -12° Neg. FTG+ATB 230.012.08 37 200 15,87 Grooving & Dado 24 6,35-22,23 3,2-2,4-1,6 -5°Neg. FTG+ATB 230.524.08 37 200 20 Two-Sided Melamine 36 4,4-5,3 3,2 10° CO+FTG 288.200.36H 24 200 30 Grooving & Dado 24 6,35-22,23 3,2-2,4-1,6 -5° Neg. FTG+ATB 230.524.08M 37 200 30 Wood 24 2,8 1,8 20° 10° ATB 290.200.24M 33 200 30 Wood 36 1,8 1,2 15° 10° ATB + 8° Shear 271.200.36M 30 200 30 Wood & Derivatives 36 3,2 2,2 15° 10° ATB 285.036.08M 12 200 30 Wood & Plywood 36 2,8 1,8 15° 15° ATB 291.200.36M 34 200 30 Wood & Plywood 48 1,8 1,2 15° 10° ATB + 8° Shear 272.200.48M 31 200 30 Wood & Derivatives 48 3,2 2,2 15° 15° ATB 285.048.08M 12 200 30 Wood & Derivatives 48 2,8 1,8 15° 15° ATB 292.200.48M 35 200 30 Aluminium 48 2,8 2,2 -6° Neg. TCG 296.200.48M 27

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



Saw Blade IndexD


mmZ K

mmP


200 30 Two-Sided Melamine 64 3,2 2,2 10° TCG 281.064.08M 19 200 30 Wood & Derivatives 64 3,2 2,2 5° 15° ATB 285.064.08M 13 200 40 Multi-Rip 21+3 2,5 1,8 18° FLAT 280.021.08S 10 200 45 Two-Sided Melamine 36 4,7-6,0 3,5 10° CO+FTG 288.200.36Q 24 200 45 Two-Sided Melamine 36 4,3-5,5 3,2 10° CO+FTG Y288.200.36Q2 24 200 65 Two-Sided Melamine 36 4,4-5,3 3,2 10° CO+FTG 288.200.36J 24 210 25 Wood 24 2,8 1,8 20° 10° ATB 290.210.24L 33 210 25 Wood & Plywood 36 2,8 1,8 15° 15° ATB 291.210.36L 34 210 25 Wood & Derivatives 48 2,8 1,8 15° 15° ATB 292.210.48L 35 210 30 Abrasive Materials 12 2,4 1,8 12° TCG 236.210.12M 33 210 30 Wood 24 2,8 1,8 20° 10° ATB 290.210.24M 33 210 30 Wood & Plywood 36 2,8 1,8 15° 15° ATB 291.210.36M 34 210 30 Metal & Steel 48 2,2 1,8 0° 8° FWF 226.048.08M 28 210 30 Wood & Derivatives 48 2,8 1,8 15° 15° ATB 292.210.48M 35 210 30 Aluminium 48 2,8 2,2 -6° Neg. TCG 296.210.48M 27 210 30 Wood & Derivatives 64 2,8 1,8 15° 15° ATB 292.210.64M 35 210 30 Aluminium 64 2,8 2,2 -6° Neg. TCG 296.210.64M 27 210 15,87<> Metal & Steel 48 2,2 1,8 0° 8° FWF 226.048.08 28 210 30 (+25) Wood 24 1,8 1,2 20° 10° ATB + 8° Shear 271.210.24M 30 210 30 (+25) Wood 36 1,8 1,2 15° 10° ATB + 8° Shear 271.210.36M 30 210 30 (+25) Wood & Plywood 48 1,8 1,2 15° 10° ATB + 8° Shear 272.210.48M 31 210 30 (+25) Aluminium & Melamine 64 1,8 1,2 -6° Neg. TCG 276.210.64M 32 215 50 Two-Sided Melamine 42 4,3-5,5 3,2 10° CO+FTG 288.215.42T 24 216 30 Abrasive Materials 14 2,4 1,8 12° TCG 236.216.14M 33 216 30 Wood 24 2,8 1,8 -5° Neg. 15° ATB 290.216.24M 33 216 30 Wood 24 2,4 1,6 -5° Neg. 15° ATB K21624M 36 216 30 Wood 24 2,4 1,6 -5° Neg. 15° ATB K21624M-X10 36 216 30 Multi-Materials 30 2,5 2 10° HR 235.216.30M 21 216 30 Wood 36 1,8 1,2 -5° Neg. 10° ATB + 8° Shear 271.216.36M 30 216 30 Aluminium 40 2,6 2,2 5° TCG 284.216.40M 26 216 30 Metal & Steel 48 2,2 1,8 0° 8° FWF 226.047.09M 28 216 30 Wood & Plywood 48 1,8 1,2 -5° Neg. 10° ATB + 8° Shear 272.216.48M 31 216 30 Wood & Plywood 48 2,8 1,8 -5° Neg. 15° ATB 291.216.48M 34 216 30 Wood 48 2,4 1,6 -5° Neg. 15° ATB K21648M 36 216 30 Wood 48 2,4 1,6 -5° Neg. 15° ATB K21648M-X10 36 216 30 Stainless Steel 56 1,8 1,4 10° 8° FWF 226.556.09M 28 216 30 Wood & Derivatives 64 1,8 1,2 -5° Neg. 10° ATB + 8° Shear 273.216.64M 31 216 30 Aluminium & Melamine 64 2,2 1,6 -6° Neg. TCG 276.216.64M 32 216 30 Wood & Derivatives 64 2,8 1,8 -5° Neg. 15° ATB 292.216.64M 35 216 30 Aluminium 64 2,8 2,2 -6° Neg. TCG 297.064.09M 27 216 30 Wood & Derivatives 80 2,8 1,8 -5° Neg. 15° ATB 292.216.80M 35 216 30 Aluminium 80 2,8 2,2 -6° Neg. TCG 297.080.09M 27 220 30 Wood 24 2,8 1,8 20° 10° ATB 290.220.24M 33 220 30 Wood & Plywood 36 2,8 1,8 15° 15° ATB 291.220.36M 34 220 30 Two-Sided Melamine 42 3,2 2,2 10° HDF 287.042.09M 18 220 30 Two-Sided Melamine 42 3,2 2,2 -6° Neg. HDF 287.043.09M 17 220 30 Wood & Derivatives 48 2,8 1,8 15° 15° ATB 292.220.48M 35 220 30 Two-Sided Melamine 63 3,2 2,2 -3° Neg. FFT 281.063.09M 19 220 30 Two-Sided Melamine 64 3,2 2,2 10° TCG 281.064.09M 19 220 30 Two-Sided Melamine 64 3,2 2,2 -5° Neg. 40° ATB 283.064.09M 15 225 30 Wood & Plywood 36 2,8 1,8 20° 15° ATB 291.225.36M 34 225 30 Wood & Derivatives 48 2,8 1,8 10° 15° ATB 292.225.48M 35 225 30 Two-Sided Melamine 64 2,6 1,8 4° TCG 281.225.64M 19 225 30 Aluminium 64 2,8 2,2 -6° Neg. TCG 296.225.64M 27 230 30 Abrasive Materials 4 2,4 1,8 12° TCG 236.230.04M 33 230 30 Wood 24 2,8 1,8 20° 10° ATB 290.230.24M 33 230 30 Wood & Plywood 36 2,8 1,8 15° 15° ATB 291.230.36M 34 230 30 Wood & Derivatives 48 2,8 1,8 15° 15° ATB 292.230.48M 35 230 30 Aluminium 48 2,8 2,2 -6° Neg. TCG 296.230.48M 27 230 30 Wood & Derivatives 64 2,8 1,8 15° 15° ATB 292.230.64M 35 235 25 Wood 24 2,8 1,8 20° 10° ATB 290.235.24L 33 235 25 Wood & Plywood 36 2,8 1,8 15° 15° ATB 291.235.36L 34 235 25 Wood & Derivatives 48 2,8 1,8 15° 15° ATB 292.235.48L 35 235 30 Wood 24 2,8 1,8 20° 10° ATB 290.235.24M 33 235 30 Wood & Plywood 36 2,8 1,8 15° 15° ATB 291.235.36M 34 235 30 Metal & Steel 48 2,2 1,8 0° 8° FWF 226.048.09M 28 235 30 Wood & Derivatives 48 2,8 1,8 15° 15° ATB 292.235.48M 35 235 30 Aluminium 48 2,8 2,2 -6° Neg. TCG 296.235.48M 27 235 30 (+25) Wood 36 2,4 1,6 18° 10° ATB + 8° Shear 271.235.36M 30

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



Saw Blade Index

235 30 (+25) Wood & Plywood 48 2,4 1,6 18° 10° ATB + 8° Shear 272.235.48M 31 240 30 Wood 24 2,8 1,8 20° 10° ATB 290.240.24M 33 240 30 Wood & Plywood 36 2,8 1,8 15° 15° ATB 291.240.36M 34 240 30 Wood & Derivatives 48 2,8 1,8 15° 15° ATB 292.240.48M 35 250 20 Garden 20 2,2 1,4 15° 10° ATB 298.250.20H 32 250 20 Wood & Derivatives 40 3,2 2,2 15° 10° ATB 285.040.10H 12 250 25,4 Garden 20 2,2 1,4 15° 10° ATB 298.250.20 32 250 30 Abrasive Materials 16 2,4 1,8 12° TCG 236.250.16M 33 250 30 Construction Materials 16 2,8 1,8 15° 5° ATB 286.016.10M 11 250 30 Wood 24 2,4 1,6 20° 10° ATB + 8° Shear 271.250.24M 30 250 30 Wood 24 2,8 1,8 20° 10° ATB 290.250.24M 11, 33 250 30 Wood 24 2,6 1,8 20° 10° ATB K25024M 36 250 30 Multi-Materials 36 2,5 2 10° HR 235.250.36M 21 250 30 Wood & Derivatives 40 3,2 2,2 15° 10° ATB 285.040.10M 15 250 30 Wood & Derivatives 40 3,2 2,2 15° 10° ATB 285.640.10M 14 250 30 Wood 40 2,6 1,8 15° 10° ATB K25040M 36 250 30 Wood 40 2,6 1,8 15° 10° ATB K25040M-X05 36 250 30 Wood 42 2,4 1,6 18° 10° ATB + 8° Shear 271.250.42M 30 250 30 Two-Sided Melamine 48 3,2 2,2 10° 45° TCG 237.048.10M 22 250 30 Wood & Derivatives 48 3,2 2,2 15° 10° ATB 285.048.10M 12 250 30 Two-Sided Melamine 48 3,2 2,2 10° HDF 287.048.10M 17 250 30 Two-Sided Melamine 48 3,2 2,2 -6° Neg. HDF 287.049.10M 16 250 30 Two-Sided Melamine 48 3,2 2,2 10° HDF 287.648.10M 17 250 30 Wood & Plywood 60 2,4 1,6 15° 10° ATB + 8° Shear 272.250.60M 31 250 30 Two-Sided Melamine 60 3,2 2,2 10° TCG 281.060.10M 20, 25 250 30 Two-Sided Melamine 60 3,2 2,2 -3° Neg. FFT 281.061.10M 19 250 30 Wood & Derivatives 60 3,2 2,2 10° 15° ATB 285.060.10M 12 250 30 Wood & Derivatives 60 3,2 2,2 10° 15° ATB 285.660.10M 14 250 30 Solid Surface 72 3,2 2,5 0° MTCG 223.072.10M 29 250 30 Stainless Steel 72 2,2 1,8 10° 8° FWF 226.572.10M 28 250 30 Two-Sided Melamine 78 3,2 2,2 10° FFT 295.078.10M 18 250 30 Aluminium & Melamine 80 2,6 1,8 -6° Neg. TCG 276.250.80M 32 250 30 PVC, Plexiglass 80 2,8 2,2 -3° Neg. MATB 222.080.10M 29 250 30 Wood & Derivatives 80 2,4 1,6 12° 10° ATB + 8° Shear 273.250.80M 31 250 30 Multi-Materials 80 3,2 2,2 15° 1FTG+4ATB 274.080.10M 16 250 30 Two-Sided Melamine 80 3,2 2,2 10° TCG 281.080.10M 20, 25 250 30 Two-Sided Melamine 80 3,2 2,2 5° TCG 281.680.10M 18 250 30 Two-Sided Melamine 80 3,2 2,2 -2° Neg. 40° ATB 283.080.10M 15 250 30 Two-Sided Melamine 80 3,2 2,2 -2° Neg. 38° ATB 283.680.10M 15 250 30 Wood & Derivatives 80 3,2 2,2 5° 15° ATB 285.080.10M 13 250 30 Wood & Derivatives 80 3 2,5 10° 20° ATB 285.580.10M 13 250 30 Wood & Derivatives 80 3,2 2,2 5° 15° ATB 285.680.10M 14 250 30 Aluminium 80 3,2 2,5 -6° Neg. TCG 297.080.10M 27 250 30 Two-Sided Melamine 80 3,2 2,2 -3° Neg. TCG 281.681.10M 19 250 30 Multi-Rip 20+4 3,2 2,2 18° 10° ATB 279.020.10M 9 250 32 Aluminium 80 3,2 2,5 5° TCG 284.080.10P 26 250 32 Aluminium 80 3,2 2,5 -6° Neg. TCG 297.080.10P 27 250 35 Wood & Derivatives 40 3,2 2,2 15° 10° ATB 285.040.10R 12 250 35 Wood & Derivatives 60 3,2 2,2 10° 15° ATB 285.060.10R 12 250 35 Wood & Derivatives 80 3,2 2,2 5° 15° ATB 285.080.10R 13 250 70 Multi-Rip 20+4 3,2 2,2 18° 10° ATB 279.020.10V 9 250 70 Multi-Rip 20+4 2,7 1,8 18° 10° ATB 280.020.10V 10 250 80 Multi-Rip 20+4 3,2 2,2 18° 10° ATB 279.020.10W 9 250 80 Multi-Rip 20+4 2,7 1,8 18° 10° ATB 280.020.10W 10 254 15,87 Metal & Steel 48 2,2 1,8 0° 8° FWF 226.048.10 28 254 15,87 Metal & Steel 60 2,2 1,8 0° 8° FWF 226.060.10 28 254 15,87 Stainless Steel 72 2,2 1,8 10° 8° FWF 226.572.10 28 254 30 Wood & Plywood 48 2,4 1,8 - 5° Neg. 15° ATB 294.048.10M 12 254 30 Metal & Steel 60 2,2 1,8 0° 8° FWF 226.060.10M 28 254 30 Wood & Plywood 60 2,4 1,8 - 5° Neg. 15° ATB 294.060.10M 12 254 30 Aluminium 80 3,2 2,5 -5° Neg. TCG 297.081.10M 27 260 30 Wood 28 2,8 1,8 20° 10° ATB 290.260.28M 11, 33 260 30 Wood & Derivatives 48 2,8 1,8 15° 10° ATB 285.048.11M 12 260 30 Wood & Derivatives 60 2,8 1,8 10° 15° ATB 285.060.11M 12 260 30 Wood & Plywood 60 2,5 1,8 -5° Neg. 15° ATB 294.060.11M 12 260 30 Two-Sided Melamine 64 2,5 1,8 -3° Neg. TCG 281.065.11M 19 260 30 Wood & Derivatives 80 2,5 1,8 -5° Neg. 15° ATB 294.080.11M 13 260 30 Aluminium 80 2,8 2,2 -6° Neg. TCG 297.080.11M 27 270 30 Wood 28 2,8 1,8 20° 10° ATB 290.270.28M 11, 33

D mm ORDER NO.β Page

B mm

Z K mm

P mm αMaterials/aPPlication

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



Saw Blade IndexD


mmZ K

mmP


270 30 Wood & Plywood 42 2,8 1,8 15° 15° ATB 291.270.42M 12, 34 275 20 Wood & Derivatives 42 3,2 2,2 15° 10° ATB 285.042.11H 12 280 30 Wood & Plywood 64 2,8 1,8 10° 15° ATB 295.064.11M 12 280 30 Aluminium 64 3,2 2,5 -6° Neg. TCG 297.064.11M 27 300 20 Wood & Derivatives 48 3,2 2,2 15° 10° ATB 285.048.12H 12 300 30 Abrasive Materials 20 2,4 1,8 12° TCG 236.300.20M 33 300 30 Construction Materials 20 2,8 1,8 15° 5° ATB 286.020.12M 11 300 30 Wood 24 2,6 1,8 22° 10° ATB + 8° Shear 271.300.24M 30 300 30 Wood 24 3,2 2,2 20° 10° ATB 293.024.12M 11 300 30 Multi-Rip 28 3,2 2,2 18° 10° ATB 278.028.12M 9 300 30 Wood & Derivatives 36 3,2 2,2 15° 10° ATB 285.036.12M 12 300 30 Multi-Materials 44 2,5 2 10° HR 235.300.44M 21 300 30 Wood 48 2,6 1,8 18° 10° ATB + 8° Shear 271.300.48M 30 300 30 Wood & Derivatives 48 3,2 2,2 15° 10° ATB 285.048.12M 12 300 30 Wood & Derivatives 48 3,2 2,2 15° 10° ATB 285.648.12M 14 300 30 Construction Materials 48 3,2 2,2 15° 10° ATB 286.048.12M 11 300 30 Two-Sided Melamine 60 3,2 2,2 10° 45° TCG 237.060.12M 22 300 30 Two-Sided Melamine 60 4,4 3,2 16° TCG 282.060.12M 25 300 30 Wood & Derivatives 60 3,2 2,2 15° 10° ATB 285.060.12M 12 300 30 Wood & Plywood 72 2,6 1,8 15° 10° ATB + 8° Shear 272.300.72M 31 300 30 Two-Sided Melamine 72 3,2 2,2 10° TCG 281.072.12M 19, 25 300 30 Two-Sided Melamine 72 3,2 2,2 -3° Neg. FFT 281.073.12M 19 300 30 Two-Sided Melamine 72 3,2 2,2 10° TCG 281.672.12M 18 300 30 Wood & Derivatives 72 3,2 2,2 10° 15° ATB 285.072.12M 12 300 30 Wood & Derivatives 72 3,2 2,2 10° 15° ATB 285.672.12M 14 300 30 Stainless Steel 80 2,2 1,8 10° 8° FWF 226.580.12M 28 300 30 Solid Surface 84 3,2 2,5 0° MTCG 223.084.12M 29 300 30 Aluminium & Melamine 96 2,8 2,0 -6° Neg. TCG 276.300.96M 32 300 30 PVC, Plexiglass 96 2,8 2,2 -3° Neg. MATB 222.096.12M 29 300 30 Two-Sided Melamine 96 3,2 2,2 15° 45° TCG 237.096.12M 22 300 30 Wood & Derivatives 96 2,6 1,8 12° 10° ATB + 8° Shear 273.300.96M 31 300 30 Two-Sided Melamine 96 3,2 2,2 10° TCG 281.096.12M 19, 25 300 30 Two-Sided Melamine 96 3,2 2,2 -3° Neg. TCG 281.697.12M 19 300 30 Two-Sided Melamine 96 3,2 2,2 5° TCG 281.696.12M 18 300 30 Two-Sided Melamine 96 3,2 2,2 2° 40° ATB 283.096.12M 15 300 30 Two-Sided Melamine 96 3,2 2,2 2° 38° ATB 283.696.12M 15 300 30 Wood & Derivatives 96 3,2 2,2 5° 15° ATB 285.096.12M 13 300 30 Wood & Derivatives 96 3 2,5 10° 20° ATB 285.596.12M 13 300 30 Wood & Derivatives 96 3,2 2,2 5° 15° ATB 285.696.12M 14 300 30 Two-Sided Melamine 96 3,2 2,2 10° FFT 295.096.12M 18 300 30 Aluminium 96 3,2 2,5 -6° Neg. TCG 297.096.12M 27 300 30 Multi-Materials 100 3,2 2,2 15° 1FTG+4ATB 274.100.12M 16 300 30 Multi-Rip 24+4 3,2 2,2 18° 10° ATB 279.024.12M 9 300 30 Multi-Rip 24+4 4 2,8 18° 10° ATB 277.024.12M 10 300 32 Aluminium 96 3,2 2,5 5° TCG 284.096.12P 26 300 32 Aluminium 96 3,2 2,5 -6° Neg. TCG 297.096.12P 27 300 35 Wood 24 3,2 2,2 20° 10° ATB 293.024.12R 11 300 35 Wood & Derivatives 48 3,2 2,2 15° 10° ATB 285.048.12R 12 300 35 Wood & Derivatives 72 3,2 2,2 10° 15° ATB 285.072.12R 12 300 35 Wood & Derivatives 96 3,2 2,2 5° 15° ATB 285.096.12R 13 300 50 Two-Sided Melamine 48 4,3-5,5 3,2 10° CO+FTG 288.300.48T 24 300 60 Multi-Rip 24+4 3,2 2,2 18° 10° ATB 279.024.12U 9 300 65 Two-Sided Melamine 72 4,3-5,5 3,2 10° CO+FTG 288.300.72J 24 300 70 Multi-Rip 28 3,2 2,2 18° 10° ATB 278.028.12V 9 300 70 Multi-Rip 24+4 3,2 2,2 18° 10° ATB 279.024.12V 9 300 70 Multi-Rip 24+4 2,7 1,8 18° 10° ATB 280.024.12V 10 300 70 Multi-Rip 24+4 4 2,8 18° 10° ATB 277.024.12V 10 300 75 Two-Sided Melamine 60 4,4 3,2 16° TCG 282.060.12X 25 300 80 Two-Sided Melamine 60 4,4 3,2 16° TCG 282.060.12W 25 300 80 Multi-Rip 24+4 3,2 2,2 18° 10° ATB 279.024.12W 9 300 80 Multi-Rip 24+4 2,7 1,8 18° 10° ATB 280.024.12W 10 300 80 Multi-Rip 24+4 4 2,8 18° 10° ATB 277.024.12W 10 303 30 Two-Sided Melamine 60 3,2 2,2 10° HDF 287.060.12M 17 303 30 Two-Sided Melamine 60 3,2 2,2 -6° Neg. HDF 287.061.12M 16 303 30 Two-Sided Melamine 60 3,2 2,2 10° HDF 287.660.12M 17 305 25,4 Metal & Steel 60 2,2 1,8 0° 8° FWF 226.060.12 28 305 25,4 Metal & Steel 80 2,2 1,8 0° 8° FWF 226.080.12 28 305 25,4 Stainless Steel 80 2,2 1,8 10° 8° FWF 226.580.12 28 305 30 Wood 28 2,8 1,8 20° 10° ATB 293.028.22M 11

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



Saw Blade IndexD


mmZ K

mmP


305 30 Wood 40 2,8 2 -5° Neg. 10° ATB K30540M 36 305 30 Wood & Plywood 54 2,8 1,8 -5° Neg. 15° ATB 294.054.22M 12 305 30 Wood 60 2,8 2 -5° Neg. 10° ATB K30560M 36 305 30 Wood & Derivatives 72 3,2 2,2 10° 15° ATB 285.072.22M 13 305 30 Wood & Plywood 72 3,2 2,2 -5° Neg. 15° ATB 294.072.22M 13 305 30 Metal & Steel 80 2,2 1,8 0° 8° FWF 226.080.12M 28 305 30 Aluminium & Melamine 96 2,8 2,0 -6° Neg. TCG 276.305.96M 32 305 30 Aluminium 96 3,2 2,5 -6° Neg. TCG 297.096.13M 27 315 30 Construction Materials 24 3,2 2,2 15° 5° ATB 286.024.13M 11 315 30 Wood 28 3,2 2,2 20° 10° ATB 293.028.12M 11 315 30 Wood 36 3,2 2,2 15° 5° ATB 285.036.13M 11 315 30 Wood & Plywood 54 3,2 2,2 15° 10° ATB 294.054.12M 12 315 30 Wood & Derivatives 72 3,2 2,2 15° 10° ATB 285.072.13M 13 315 30 Aluminium 96 3,2 2,5 -6° Neg. TCG 297.096.23M 27 320 65 Two-Sided Melamine 60 4,4 3,2 16° TCG Y282.060.13J 25 320 65 Two-Sided Melamine 72 4,4 3,2 16° TCG 282.072.13J 25 330 30 Aluminium 96 3,2 2,5 -6° Neg. TCG 297.096.33M 27 330 32 Aluminium 96 3,2 2,5 -6° Neg. TCG 297.096.33P 27 350 30 Construction Materials 24 3,2 2,2 15° 5° ATB 286.024.14M 11 350 30 Wood 28 3,5 2,5 20° 10° ATB 293.028.14M 11 350 30 Multi-Rip 36 3,5 2,5 18° 10° ATB 278.036.14M 9 350 30 Two-Sided Melamine 54 4,4 3,2 16° TCG 282.054.14M 25 350 30 Wood & Derivatives 54 3,5 2,5 15° 10° ATB 285.054.14M 12 350 30 Wood & Derivatives 54 3,5 2,5 15° 10° ATB 285.654.14M 14 350 30 Two-Sided Melamine 72 3,5 2,4 15° 45° TCG 237.072.14M 22 350 30 Two-Sided Melamine 72 4,4 3,2 16° TCG 282.072.14M 25 350 30 Wood & Derivatives 72 3,5 2,5 15° 10° ATB 285.072.14M 12 350 30 Two-Sided Melamine 84 3,5 2,5 10° TCG 281.084.14M 19 350 30 Two-Sided Melamine 84 3,5 2,5 10° TCG 281.684.14M 18 350 30 Wood & Derivatives 84 3,5 2,5 10° 15° ATB 285.084.14M 12 350 30 Wood & Derivatives 84 3,5 2,5 10° 15° ATB 285.684.14M 14 350 30 Two-Sided Melamine 108 3,5 2,5 10° TCG 281.108.14M 19, 25 350 30 Two-Sided Melamine 108 3,5 2,5 5° TCG 281.708.14M 18 350 30 Two-Sided Melamine 108 3,5 2,5 5° 40° ATB 283.108.14M 15 350 30 Wood & Derivatives 108 3,5 2,5 5° 15° ATB 285.108.14M 13 350 30 Wood & Derivatives 108 3,5 2,5 5° 15° ATB 285.708.14M 14 350 30 Two-Sided Melamine 108 3,5 2,5 10° FFT 295.108.14M 18 350 30 Aluminium 108 3,2 2,5 -6° Neg. TCG 297.108.14M 27 350 30 Multi-Rip 24+6 4,2 2,8 18° 10° ATB 277.024.14M 10 350 30 Multi-Rip 28+4 3,5 2,5 18° 10° ATB 279.028.14M 9 350 32 Aluminium 92 3,2 2,5 5° TCG 284.092.14P 26 350 32 Aluminium 108 3,2 2,5 5° TCG 284.108.14P 26 350 32 Aluminium 108 3,2 2,5 -6° Neg. TCG 297.108.14P 27 350 35 Wood 28 3,5 2,5 20° 10° ATB 293.028.14R 11 350 35 Wood & Derivatives 54 3,5 2,5 15° 10° ATB 285.054.14R 12 350 35 Wood & Derivatives 84 3,5 2,5 10° 15° ATB 285.084.14R 12 350 35 Wood & Derivatives 108 3,5 2,5 5° 15° ATB 285.108.14R 13 350 50 Two-Sided Melamine 72 4,4 3,2 16° TCG 282.072.14T 25 350 60 Two-Sided Melamine 72 4,4 3,2 16° TCG Y282.072.14U 25 350 60 Multi-Rip 28+4 3,5 2,5 18° 10° ATB 279.028.14U 9 350 70 Multi-Rip 36 3,5 2,5 18° 10° ATB 278.036.14V 9 350 70 Multi-Rip 24+6 4,2 2,8 18° 10° ATB 277.024.14V 10 350 70 Multi-Rip 28+4 3,5 2,5 18° 10° ATB 279.028.14V 9 350 75 Two-Sided Melamine 54 4,4 3,2 16° TCG 282.054.14X 25 350 75 Two-Sided Melamine 72 4,4 3,2 16° TCG 282.072.14X 25 350 80 Two-Sided Melamine 54 4,4 3,2 16° TCG 282.054.14W 25 350 80 Two-Sided Melamine 72 4,4 3,2 16° TCG 282.072.14W 25 350 80 Multi-Rip 28+4 3,5 2,5 18° 10° ATB 279.028.14W 9 355 25,4 Metal & Steel 72 2,2 1,8 0° 8° FWF 226.072.14 28 355 25,4 Metal & Steel 90 2,2 1,8 0° 8° FWF 226.090.14 28 355 25,4 Stainless Steel 90 2,2 1,8 10° 8° FWF 226.590.14 28 355 30 Two-Sided Melamine 72 4,4 3,2 16° TCG S282.03556 25 355 30 Metal & Steel 90 2,2 1,8 0° 8° FWF 226.090.14M 28 355 30 Stainless Steel 90 2,2 1,8 10° 8° FWF 226.590.14M 28 355 65 Two-Sided Melamine 72 4,4 3,2 16° TCG 282.072.14J2 25 380 60 Two-Sided Melamine 72 4,4 3,2 15° TCG 282.072.15U2 25 380 60 Two-Sided Melamine 72 4,8 3,5 16° TCG 282.072.15U 25 355 80 Two-Sided Melamine 72 4,4 3,2 16° TCG 282.072.14W2 25 380 80 Two-Sided Melamine 72 4,4 3,2 16° TCG 282.072.15W 25

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



Saw Blade IndexD


mmZ K

mmP


400 30 Construction Materials 28 3,2 2,2 15° 5° ATB 286.028.16M 11 400 30 Wood & Derivatives 36 3,5 2,5 20° 10° ATB 285.036.16M 11 400 30 Wood & Derivatives 48 3,5 2,5 20° 10° ATB 285.048.16M 12 400 30 Two-Sided Melamine 60 4,4 3,2 16° TCG 282.060.16M 25 400 30 Wood & Derivatives 60 3,5 2,5 10° 15° ATB 285.060.16M 12 400 30 Wood & Derivatives 60 3,5 2,5 10° 15° ATB 285.660.16M 14 400 30 Two-Sided Melamine 72 4,4 3,2 16° TCG 282.072.16M 25 400 30 Wood & Derivatives 96 3,5 2,5 10° 15° ATB 285.096.16M 13 400 30 Wood & Derivatives 96 3,5 2,5 10° 15° ATB 285.696.16M 14 400 30 Wood & Derivatives 120 3,5 2,5 10° 15° ATB 285.120.16M 13 400 30 Aluminium 120 3,8 3,2 -6° Neg. TCG 297.120.16M 27 400 30 Multi-Rip 28+6 4 2,8 18° 10° ATB 279.028.16M 9 400 32 Aluminium 96 3,8 3,2 5° TCG 284.096.16P 26 400 32 Aluminium 108 3,8 3,2 -6° Neg. TCG 297.108.16P 27 400 60 Two-Sided Melamine 72 4,4 3,2 16° TCG 282.072.16U 25 400 70 Multi-Rip 28+6 4 2,8 18° 10° ATB 279.028.16V 9 400 75 Two-Sided Melamine 60 4,4 3,2 16° TCG 282.060.16X 25 400 75 Two-Sided Melamine 72 4,4 3,2 16° TCG 282.072.16X 25 400 80 Two-Sided Melamine 60 4,4 3,2 16° TCG 282.060.16W 25 400 80 Two-Sided Melamine 72 4,4 3,2 16° TCG 282.072.16W 25 420 32 Aluminium 96 3,8 3,2 5° TCG 284.096.17P 26 420 80 Two-Sided Melamine 72 4,4 3,2 16° TCG 282.072.17W 25 430 65 Two-Sided Melamine 72 4,4 3,2 16° TCG Y282.072.17J 25 430 75 Two-Sided Melamine 72 4,4 3,2 16° TCG 282.072.17X 25 430 80 Two-Sided Melamine 72 4,4 3,2 16° TCG 282.072.17W2 25 450 30 Construction Materials 32 3,8 2,8 15° 5° ATB 286.032.18M 11 450 30 Wood & Derivatives 36 3,8 2,8 20° 10° ATB 285.036.18M 11 450 30 Wood & Derivatives 54 3,8 2,8 15° 15° ATB 285.054.18M 12 450 30 Wood & Derivatives 66 3,8 2,8 10° 15° ATB 285.066.18M 12 450 30 Two-Sided Melamine 72 4,4 3,2 16° TCG Y282.072.18M2 25 450 30 Aluminium 140 3,8 3,2 -6° Neg. TCG Y297.140.18M 27 450 30 Aluminium 108 3,8 3,2 5° TCG 284.108.18M 26 450 30 Aluminium 108 3,8 3,2 -6° Neg. TCG 297.108.18M 28 450 32 Aluminium 108 3,8 3,2 -6° Neg. TCG 297.108.18P 28 450 60 Two-Sided Melamine 72 4,8 3,5 16° TCG 282.072.18U 25 450 80 Two-Sided Melamine 72 4,8 3,5 16° TCG 282.072.18W2 25 500 30 Construction Materials 36 3,8 2,8 15° 5° ATB 286.036.20M 11 500 30 Wood & Derivatives 44 4 2,8 20° 10° ATB 285.044.20M 11 500 30 Wood & Derivatives 60 3,8 2,8 15° 15° ATB 285.060.20M 12 500 30 Wood & Derivatives 72 3,8 2,8 10° 15° ATB 285.072.20M 12 500 30 Aluminium 120 4 3,2 -6° Neg. TCG 297.120.20M 28 500 30 Aluminium 120 4 3,2 5° TCG 284.120.20M 26 500 32 Aluminium 120 4 3,2 5° TCG 284.120.20P 26 500 32 Aluminium 120 4 3,2 -6° Neg. TCG 297.120.20P 27 500 60 Two-Sided Melamine 72 4,8 3,5 16° TCG 282.072.20U 25 500 80 Two-Sided Melamine 72 4,8 3,5 16° TCG Y282.072.20W 25 550 30 Construction Materials 40 4,2 3,2 15° 5° ATB 286.040.22M 11 550 30 Wood & Derivatives 60 4,2 3,2 10° 15° ATB 285.060.22M 12 550 30 Wood & Derivatives 96 4,2 3,2 10° 15° ATB 285.096.22M 12 550 100 Two-Sided Melamine 72 5,2 3,5 16° TCG 282.072.22A 25 600 30 Construction Materials 40 4,2 3,2 15° 5° ATB 286.040.24M 11 600 30 Wood & Derivatives 66 4,2 3,2 10° 15° ATB 285.066.24M 12 700 30 Construction Materials 46 4,4 3,2 15° 5° ATB 286.046.28M 11 700 30 Wood & Derivatives 72 4,4 3,2 10° 15° ATB 285.072.28M 12

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com



MacHine MacHine MacHineDxB mm

DxB mm

DxB mm

AEGHK 125 120x20HK 125 A, HK 125 B, HK 125 H 125x20TKS 42, PC 300 132x20HK 40, TK 40, TKS 42 140x20HK 86, HK 707 143x19HK 45, HK 717, HK 727 150x19AHK 52, HK 45 A, HK 46, HK 46 S, HK 46 N, 150x20HKS 46, HKS 46 S, HKS 46 N, HK 50,HK 52, HKS 52, HK 737HK 55, HK 55 A, HK 55 B, HKS 55, 160x20HK 160 A, HK 160B, KS 55 S, KS 55 SEHKS 64 A, HK 65, HK 65 A, HKS 65, 190x30HKS 65 A, HK 66, HKE 66, HKS 66,HKSE 66, HK 190, K 66, K 66 E, K 66 S,K 66 SE, KS 65, KS 66 SHK 200 200x25HK 201 200x30HK 75, HK 75 A, HKS 75 210x30HKS 35, HKS 85 230x30HK 240 240x30MK 65 280x30

ALKOBasic 205 GK 205x18Pro 250 GK 250x20Basic, HS 3, HS 4, Hobby, Holzmeister H, 315x30Holzmeister S, Holzmeister NHS, Pro-XW 450, W 500 450x30W 50 Profi, W 450, W 500 500x30RM 60, W 60 600x30RM 70, RZ 70, TWM 70, TWZ 700, W 70 700x30

ALPHA-TOOLSKS 250 205x18

ATIKAToptronic 250x30ATK 315 H, BTA 90, HAT 315 315x30ABH 400, ABK 400, BTH 400, BTK 400 400x30ABH 450, ABK 450, ATU 450, 450x30BTH 450, BTK 450, BTU 450, BWK 450ABH 500, ABK 500, BTH 500, 500x30BTK 500, BTU 500, BWK 500

AVOLALH 315, TZV 315, TVZ 315 W 315x30TZH 350, TZH 350 W 350 30, ZB 400, 450x30ZBV 400 400 30IC 450, ZB 450, ZBV 450ZB 500, ZBV 500 500x30BWS 550 550x30KWK 600, RK 600 600x30BWS 700, BWTS 700, KWK 700 700x30

BLACK & DECKERD 984, D 985, DN 55, DN 56, 125x12,75DN 254, DN 984, DN 985KC 1440 SK 136x10BD 227, BD 228, BD 846, CD 600, DN 227, 140x12,75DN 227 H, KS 40, KS 227, KS 840, KS 846,P 3501P 88-09 (Akku, 12 V) 150x20BD 228, BD 228 CK, BD 228 L, 156x12,75DN 57, DN 228, SR 352, SR 352 E, P 3601BD 855, GKS 54 CE, KS 55, KS 855, KS 855 N, 160x16M 336, M 975, M 976,U 336, U 975, U 976BD 229, BD 865, BD 865 E, DN 59, DN 229, 180x16DN 820, GD 60, HD 100, HD 1000,HD 1200 P, HD 2062, KS 65 K, KS 865, KS865 E, KS 865 KN, SEC 718, SR300, SR 362 E, P 37-03, P 37-05HD 1200 180x20BD 365 190x30M 338, U 338 200x16BD 88, BD 800, DN 800, 210x30DN 810, HD 2075 S HD 20755,KS 800, KS 805, KS 810, KS 810 A,P 38-02, PS 174, SEC 818, SR 700

BOSCHGUF 4-22 A, PSF 22 (Schatten-fugensäge) 105x20PKS 38, PKS 40, PKS 40 S, S 43 130x161551, 1559 140x20GKS 12 V, GKS 46, PKS 46, 150x16PKS 416, PKS 48, S 1, S 33GKS 24 V, GKS 54, GKS 54 C, 160x16GKS 54 CE, GKS 54 E, GKS 59,KS 550, PKS 54, PKS 54 CE1552, 1556, 1563, GKS 55 170x300550, 1550, 1553, 1557, 1560 180x30P 300, PKS 65 190x160051, 1553, 1564, GKS 65, GKS 66, 190x30GKS 66 CE, GKS 68 B, GKS 68 BC,GKS 68 CE, P 30, PKS 66, PKS 66 CE0551, 1561 200x301554, 1558, 1565, 1588, GKS 72 S 210x30GCM 8 S 216x300052, 0552, 1562, 1566, 1662, GKS 85 S 230x301555 240x30GCM 10, GCM 10 S, GCM 10 250x30SD, GTS 10 250x30GCM 12, GCM 12 S 305x30

CASAISSC 650 150x20VSC 65 200x30HKS 2000 210x30SC 320 230x30

DEWALTDW 935 K, DW 936 K 136x10DW 351 150x20DW 007 K, DW 007 KH 165x10DC 390 KA, DC 390 KA/3, DC 390 KB 165x20DW 62 184x16DW 365 190x30DW 700, DW 701, DW 707 216x30DW 383 235x30DW 86 240x30DW 100, DW 110, DW 111 250x16DW 120, DW 125, DW 150, DW 170, DW 250, 250x30DW 252, DW 320, DW 702, DW 703, DW 710,DW 742, DW 743, DW 744, DW 720 K, DW 746 K, DW 1251, DW 1370, DW 1501,DW 1503DW 709, DW 711 260x30DW 721, DW 722 K, DW 725 K, DW 726 K, 300x30DW 810, DW1370, DW 1935/31L, 142 DS,160 DS, 1635, 1875, 2155MC 20 300x32DW 704, DW 705, DW 706, 305x30DW 708, D 27105 350x30DW 728 K, DW 729 K, 1600 S, C 14C 14, 1600 S, 1635 GL, 2155 G 400x306 K, 6 L, DA 1635 500x30

EINHELLBT-CS 1200, HES 55, HES 160 160x20RT-CS 165 165x16BHS 1300 184x16BT-CS 1400 190x20RT-CS 190 L 190x30BT-TS 800 200x16HES 200 200x30RT-TS 920 205x16RT-FF 1220 U 205x30BT-MS 210, BT-SM 2050, KGST 210x30210, RT-SM 305 L, RT-TS 1221KGT 500 250x20BT-MS 250 L, BT-SM 3100, 250x30BT-TS 1500 U, KGS 250, KGS, 300 UG,KGS 301, KGS 330, KGTN 245, KGTN 250,RT-SM 430 U, RT-TS, 1725 U, RT-TS 1825 U,RT-UD, 1825, RT-UD 1825, RT-XM 305 URT-SM 330 U 305x30RT-CC 315 U, RT-TS 2031 U, RT-TS 2231 DU 215x30BT-LC 400/1 400x30BT-LC 500 450x30BT-LC 700 D 700x30

ELEKTRA BECKUMMulti 180 200x30KS 205 205x18KS 210, GKS 255, P200, PK 200, 210x30PK 220, UK 220 W, UK 220 ESecanta 220x30PK 250, PK 255, KGT 500, KGS 250x20300, KGT 550, UK 330, KS 250KGS 250, KGS 250 K, KGS 300, KGS 301, 250x30KGS 303,KGS 330, KGS 331, KGT 250,KGT 500, KGT 501, KGT 550, KS 250, KS304, Multi 260, Multi 310, PK 250,PK 255, PK 2800, PK 3100, PK4200, PK 6000, PKF 255, UK250, UK 330PK 300, PK 300 K, PKV 300 G 300x30KS 304 304x301800, 2200, 2800, 3100, 4100, 315x30Combi und Standard HS 315,Combi HSG, TKHS 315, TK, HS 315 ETK 350 350x30BKH 400, BKS 400, BKS 450, 400x30BS 3100 W, BS 4200, BS 5500 WBKH 450, BKS 450, BS 6000 D, 450x30BS 8000 DBKH 450, BS 6000 D, BS 8000 D 500x30BW 400, BW 600, BW 700 600x30BW 700, BW 750, BW 4000 700x30

ELU/DEWALTMKK 26 86x12MH 25, MH 25 K 100x12DS 140 Doublo Schatten-fugensäge 105x22MHA 14 KA, MHA 18 KA 136x10MH 151, MH 151/10, MHA 151 150x20MH 18, MH 30, MH 82, MH 182, PS 174 150x30MH 55, MH 155 170x30MH 65 180x30MH 165, MH 265 190x30MH 30, MH 82, MH 182 215x30ETS 41, PS 174, PS 274, PS 244 E 216x30MH 85, MH 286 240x30

ELU/DEWALT (vervolg)ETS 21, ETS 23, ETS 31, ETS 33, KSU 101, 250x30RAS 1251, RAS 1253, RKS 1251, RKS 1253,TGS 71, TGS 170, TGS 171, TGS 172,TGS 173, TGS 271, TGS 273EMTS 711 260x30ETS 3001, ETS 3003, PS 374 300x30EMS 705, PS 374 305x30RKS 1603 350x30MTS 24 355x25,4RSA 133/25 500x30

ELUMATECKS 101, MGS 460 254x32DG 163, RS 160, TS 161 280x32KS 101, MGS 460 300x32MGS 72/04, MGS 73/23 330x32DG 79/03-05, DG 79/50, SA 73/25 330x32DG 79/30-32, DG 79/51, MGS 380x3272/30, MGS 73/33, SA 73/35DG 102, DG 104, DG 140, MGS 420x30105, MGS 461, SA 103/25DG 142, MGS 142, SA 142 500x30DG 204, DG 240, MGS 205 550x30

EMCOUniversal 200x15Rex 2000, Super 1011 250x20KS 80, MK 81 250x30

EUMENIAML 50 L 220x30

FEINSSK 646, SSL 646 150x20SSK 660 160x20SSK 661 210x30

FELDERKF 700 250x30BF 6-26, BF 6-31, BF 6-41, 315x30BF 31, K 37, KFS 37

FELISATTITP 751 150x20TP 756 160x20TP 765 190x20TP 781 230x30T 84, T 85, T 87, T 770, T 771, 250x20T 777, T 777 B, T 777 CE, T 778, T 867 GSM 74, M 75, M 76, M 77, T 84, 250x30T 85, T 87, T 88T 82, T 83, T 91, T 91 CE, T 97 CE 300x30

FERMFZT 250, FZT 250 EN 250x30

FESTOOLAUF 35-S3, AUF 35-S4 105x20AUF 35-S2 120x20AF 45 E, AXF 45 150x30AP 55, AP 55 E, AP 55 E-FS, AP 55 FS, 160x20ATF 55, ATF 55 E, ATF 55 EB, ATF 55 E-FS, ATF 55 FS, AP 55 EB, TS 55, TS 55EQ, TS 55 EBQ, TS 55 QAAU, AU 50, AUP 50 160x30AM 42 A, AM 42 S, AM 42 T, AMT 42 S, 170x33AT 55 B, AT 55 C, AT 55 E, ATU 42-S,AU 42 S, AUT 42 S, AXT 50 LA, AXT 55AU 55 S, AU 60 P, AU 60 S, A 180x30UP 60 S, AUT 60 SAP 65, AP 65 E, AP 65 E-FS, AP 65 EB, 190x30AP 65 EB-FS, AT 65, AT 65 E, AT 65 E-FS,AT 65 EB, AT 65 EB-FSAD 65, AP 68 E, AP 65 S, AU 65 S, 200x30AUP 65 S, AUT 65 S, AXP 65, AXP 200TS 75, TS 75 EBQ, TS 75 210x30EBQ-FS, TS 75 EQSymmetric SYM 70 216x30AU 77 S 220x30CS 70, CS 70 EB 225x30AU 80 S 230x30AP 85, AP 85 E, AP 85 E-FS, AP 85 E-TS, 240x30AP 85 EB, AP 88, AP 88 E, AXP 85AD 85, AD 100, AE 85, AE 88 250x30Kapex KS 88, Kapex KS 120 260x30AXP 130, AXP 132 E, BD 125 350x30BD 145, BD 145/1 400x30BD 170 450x30

FEZERKG 20 200x18KG 205 205x18KG 25 250x32KG 30 300x32KG 40 S 400x32AB 600 600x32

FLOTT/FLOTTJET/KRÄKU1000, 2000, Profi 3000 250x20KS 1011, TKS 2011 D, TKS 2011 W, 250x30KS 2011 D, KS 2011 W, KS 2012, 3011,Profi 2000, Profi 2001,Profi 3011, Uni-Profi 2011FKS 3000, KKS 305 M 315x30

Saw Blades for Portable Machines

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com


www.scosarg.com50

MacHine MacHine MacHineDxB mm

DxB mm

DxB mm

GRAULEAKF F, AKF 4/200 200x40AKF 2, AKF 4/250, AKF 6/250, KS, TS 250x4085 N, AGL, AGT, AKF 6/300, Typ 85, ZS 85 300x40Typ 135, ZS 135, ZS 135 N 350x40Typ 170, ZS 170, ZS 170 N 420x40ZS 200 520x50

GÜDEGTK 721 205x18GTK 800 205x20GKS 1100 P, GRK 210/300, 210x30GUKS 2100, KT 210GFO 1401 216x30GKS 250 L, GKS 250 T, GRK 250x20250/300, GRK 250/500TK 2500 UG, GFO 1801 254x20TK 2400 ECO 254x30GTKS 315 315x30GWS 400 Eco 400x30GWS 450 Eco 450x30FP 600 Plus, GWS 600 EC, 600x30GWS 600 HM, QWS 600DTW 700, DWS 700, DWS 700 Z, GWS 700, 700x30FP 700 Plus, GWS 700 HM, GWS 700 EC,PRS 700/7 HMF, PTW 700/7HMF, PWS 700/7 HMF

HAAGERHTK 200 200x30HKGS 250, HMS 10 RA 250x20GKS 250 HR, HBTS 10 A 250x30HTK 300 300x30

HAFFNERRF 60 100x20KSU 40 120x20KSU 105, KSU 125 125x20KSU 50 160x20KSU 110 170x30KSU 60, KSU 113 180x20KSU 60 alt 200x30GL 136 200x20AKS 210x30AS 75, KS 75, RS 75 220x30140, KL 177, KL 178, KSU 118 220x30HSU 85, KL 176, KS 85, KSU 85, 250x30SP 187, US 85AKS, GS 1, GS 2W, GS 2 D, GS 150, GS 163, 250x30GS 165, GS 166, KL 140, SP 189, SP 195,SP 196, SP 197, SP 198, TGS 161, TGS 162, TGS 163, TGS 198MK 251 B 300x32950, GS 146, GS 147, GS 148, GS 155, 330x30GS 156, GS 157, GS 158, GS 165, GS 166, GS 183, GS 183 M, KS 120, KS 155, SP 221, SP 223, SP 224, TGS 168, TGS 169, TGS 200, TK 42, US 151DGS 180, DGS 182, GSM 180, GSA 180 350x30GS 159, GS 160 340x30MK 350 Vario 400x32DGS 123, DGS 124, DGS 180, DGS 181, 500x30DGS 182, DGS 184, DGS 184 E, DGS 188,DGS 185, GS 183, GS 184, GS 188 M, GS 188 P, GSA 184 E, KS 155, ZS 640, ZS 800DGS 187, DGS 202, GS 161, 600x30GS 162, US 161, US 162 30

HANNINGTK 20 N, TK 20 S, TK 200, 200x16TK 300, ZK 205, HKS 250 250x163 VS, HTK 315/1.6, HTK 315/2.1, 315x30HTK 315/3.0, HTK 315/3 SV, HTK 315/4.0

HANSEATICPSC 160 D 160x20

HILTIWSC 55 160x20WSC 85 230x30

HERCULESKG 205 205x16TKS 250 UV 250x16BK 315/1 315x30

HITACHIC 5 Y 125x20C 5, FC 5, FC 5 SA 150x20C 6, C 6 DA, C 60 A, FC 65 A, FC 6 SA 160x20C 6 BU, C 6 U, C 6 DD-Akku, FC 6 SB 165x30C 6 SA, PSU 6 170x30C 7 U, C 7 BU, FC 7 SA, PSM 7, PSM 7 A, 190x30PSU 7 C 8 U, C 8 FA, PSM 8, PSU 8 210x30C 8 FC, C 8 FS 216x30C 9 U 235x30PSM 9, PSM 9 A, PSU 9 240x30U 210 250x30C 10 FB, C 10 FCA, C 10 FCS, C 10 RA 255x30C 13 U, PSU 13 335x30C 15 FC 380x30

HOLZ-HER (REICH)Derby 2110, Mosquito 2111, Mosquito 2171 132x30

2260, 2270 140x302103, 2104, 2105, 2106, 2107, 160x302108, HKU 501563, 2115, 2266, 2271, 2281 170x302112, 2272, 2291, HKU 55 180x302114, 2116, 2117, 2119, 2126, 190x302127, 2269, 22822113, 2292, 2555, HK 201 200x302267, 2284, PKS 267 210x30Leistensäge 2141 216x302267, 2274, 2279, 2284, HKU 75, PKS 220x302118, 2120, 2171, 2279, 2293, 2294 230x302128, 2268, HKD 65 240x30HKD 85, HKD 275, HKD 1212, PKS 1210, 300x30PKS 1211, PKS 1213, PKS 1225, PKS 1230 303HKS 130, HKS 150, HKS 276 350x30HKS 2136 380x30HKS 155, HKS 277, HKS B 7 K, BTK 155 400x30

JEPSON8219 192x209211 D 255x25,49312 E, 9430 305x25,49314, 9435 355x25,4

KITY626 150x20510, 616, 617, 2617 180x150419, 7419, 0618, Kombi 2000, 200x30Kombi 5023, Junior 6618 250x301609, 1619, 5619, 6619, 9619 2 70x30819 315x30

KRESSCHKS 6050, CHKS 6055 160x20CHKS 6060, 1400 HKS, 1500 KS, 1800 KSE 190x20

MAFFELA 35, FS 35, KSS 300, KSP 40 120x20SF 32, X 40, XE 40 125x20A 55, B 55, FU 50, KSP 55, KSP 55 F, 160x20KSS 330, KSS 400, KST 55, MKS 55, MS 55, MT 55, PS 52, PSS 3000, PS 3100, X 55, XE 55KS 320 160x30Erika 55 180x30Erika 60, KSP 65, KSP 65 F, MS 65, MKS 65 190x30B 65, X 72 200x30AS 65, FUS 65 210x20MS 75, MKS 75 210x20Erika 70 E, MKS 85 225x20KSP 85, KSP 85 FC 230x30B 82 240x30Erika 85, MS 85, MKS 85, MKS 85 S 250x30A 85, Erika 65, FS 65, FU 585, FUS 85 280x30Erika 70 L, Erika 70 K 290x20Biberex, MKS 105, Monika, 315x30TFK 85 L, TKF 85 KBiber, FS 85 325x30MKS 130 EC 330x30MKS 125, MKS 125 E 355x30MKS 145, MKS 145 EC 370x30BK 3, BKS 4, FS 130, FS 130 S, TD 3, VKS 1 400x30MKS 165, MKS 165 EC, FS 130K 410x30TDH 4, TDH 425 425x30BK 4, BKV 4, BKS 5, FSG 165, 450x30MKS 185 EC, TDH 5, TDH 450BKV 5, BKS 6, TDH 5-170 500x30FSG 200 550x30FSG 240 K 640x30

MAKITA4341 S, BTK 0, KS 0852 S, 61+2, 52 S 150x205600 NB, 5600 RDW 160x20167, 0846 S, 0946 S, 5600 BR, 5603 R, 165x205604 R, TK 1256, KS 1155, KST 1157 S, KSTE 1357, S-Signal, SBTK 1, SR 16005500 S, 5800 B, 5801 B, 6317 S 180x205800 BR, SR 1800 185x204346 S, KS 65, KS 1266 S, KS 190x201468, KS 4345 S, KSE 1668, TK 53485703 R, 5705 R, 5017 RKB 190x30Radial-Eudora 5700 200x25LS 0810, SR 2100 210x25KGS E 1670 S, KSE 1678 S 210x306322 S 220x30SR 2300, SR 5900 B, SR 5900 BR 235x255903 R 235x30KS 1785, KS 6323 S 240x30LS 1013, LS 1014 260x25SR 2600 266x255103 R, SR 2600 270x305100 BR 335x255143 R 355x30

METABOF 0520 100x224340 S, BHK 2, BHK 3, 4345 S 140 20 140x134341 S, BTK 0, 61 + 2, KS 52, 150x20KS 0846 S, KS 0852 S

BTK 1, KS 1155 S, Magnum, TK 1256 165x206317 S 180x20KS 655, KS 1266, KS 1468 S, 190x20KS 4345 S, KS 4346 S, KS5348,KSE 1668, RobertKGSE 1670, KSE 1678 S-Signal, 210x30Magnum TK 1066, TKU 2256322 S 220x30KS 1785 S, KS 6323 S 240x30TK 1633, TKU 1633, TKU 1693 250x30TK 1688, TK 1688 D 315x30

PANASONICEY 3501 110x20EY 3530 135x20

PERLES25 S 100x12SC 47 C 140x20KS 50, Peugot, SC 53 C 150x20FIP 50 S 180x20KS 85 230x30

PROTOOLCSP 55-2, CSP 56 EQ, 160x20CSP 56 Q, CSP 68CSP 68 E 190x30CSP 85 240x30

ROBLANDK 210 - 260 240x30X 260 250x30K 310, X 310 300x30

ROCKWELL346, 63416 170x16315, 4500, 63417 184x16368, 63418 220x20

SCHEERHM 5, HM 6 100x22MS 50 150x16MS 45, MS 45 E 150x20FM 160x16MS 55 160x20FM 180x16MS 65, MKS 65 190x30MS 70 200x30MS 80 220x30MS 85 230x30FM 10, A 3100, A 4200 240x30

SCHEPPACHKG 205 205x18TS 2000 200x30Capas 1, Capas 2 216x30KG 250, TKG 250, TS 2500 250x20KSE 250, TS 2500, KG 260, TKG 250x30260, KG 280, TKG 280Capas 3, TKG 305 E 305x30TS 315 GT, TS 400, TS 4010, TKU 315x30BSH 400 400x30BSH 500 500x30

SKIL22501 B 1255140 A, 5140 B, 5240 130532 140533, 553, 5246, 1800 H, 1850 H 150416 H, 534, 536, 552 B, 1408 H, 1601409 H, 1410 H, 1440 H, 5750 A77 U, 537 U, 553 B, 553 H, 184559 U, 574 U, 599 U, 8571865, 1866, 5266, 5565, 5566, 1905666, 5866 A, 1899, 1965 U, 1986554 B, 554 H, 825, 858, 1524 H, 1873 H 210555 H, 1525 H, 1886 H, 1985 U 2301523 H, 1526 H, 1899 H 260

STAYERCP 50 150x20KS 700, SC 205, TKS 2000 205x18SC 250, SC 251, SCU 75 250x20SC 260, SCE 1610, SLL 250 250x30TD 305 305x25,4

TIPHKS 160 160x20HKS 200 200x16TKS 250 250x15,8TGS 250 250x25,4

ULMIA1409 B 160x201706, 1708 200x161710 S, 1710 R 250x15,8Gecombineerde Macchine 300x25,4

WEGOMATB 204 105x22HS 50 150x20TS 250 250x30S 4 D, S 4 W 350x30TS 400 400x30

Saw Blades for Portable Machines

Scott+

Sargea

nt Woo

dwork

ing M

achin

ery Lt

d

ENGLAND

Tel +4

4 (0)

1403

2730

00

www.sc

osarg

.com


Date post:	23-Feb-2023
Category:	Documents
Upload:	khangminh22
View:	0 times
Download:	0 times

SAW BLADES - Scott+Sargeant

Documents