Date post: | 01-Apr-2023 |
Category: |
Documents |
Upload: | khangminh22 |
View: | 0 times |
Download: | 0 times |
SIGMACOVER™RECOATABLE EPOXY SYSTEMSPRODUCT LINE SERVING EUROPE, MIDDLE EAST AND AFRICA
PROTECTIVE COATINGS
www.sigmacoatings.com/protective
PPG PROTECTIVE & MARINE COATINGSUNRIVALLED PERFORMANCE AND PROTECTION
PPG Protective & Marine Coatings (PPG) is a world leaderin protective and marine coatings. We develop productsthat protect customers’ assets in some of the world’s most demanding markets and environments including:
• CIVIL INFRASTRUCTURE • RAIL • MARINE NEW-BUILD • OFFSHORE • MARINE DRY DOCK • PETROCHEMICAL • MARINE SEA STOCK • POWER
Our coatings provide unrivalled performance for asset owners, contractors, fabricators and applicators across the globe, helping our customers meet the challenges they face today and tomorrow.
EXPERIENCE, INNOVATION AND INTEGRITY –that is what makes PPG the ideal coatings partner.
SIGMA COATINGS®A GLOBAL BRAND YOU CAN TRUSTAND SERVICE YOU CAN RELY ON
SIGMA COATINGS is a brand of PPG Protective & Marine Coatings.
In the most challenging and hostile environments,SIGMA COATINGS delivers proven protective solutions forevery onshore and offshore application.
Supporting these innovative products, our worldwide supply is backed up by the unrivalled expertise of our global customer service team and sales representatives who will assess your exact needs and assist in specifying the optimum coatings solution.
Our commitment doesn’t end there. To ensure that your project runs smoothly, our experienced, local technical field representatives can be assigned to provide any further advice and onsite support you may need throughout the application, including training on current industry legislation.
Constantly at the forefront of protective coating technology, SIGMA COATINGS’ products are tested, approved and certified to all the relevant industry standards. This continuous drive for product excellence ensures that we provide state-of-the-art coating solutions that will not only meet but exceed your requirements.
SIGMACOVER™ RECOATABLE EPOXY SYSTEMS
THE SIGMACOVER RANGE
SIGMACOVER is a range of tough, durable epoxy coatings designed to deliver outstanding corrosion protection forboth new construction and maintenance of major assets.
The benefits of SIGMACOVER result in easy-to-apply,cost-effective solutions within a wide range ofapplications across the protective coatings industry.
The following specific characteristics can be foundin certain products within the SIGMACOVER range:
• Unlimited recoatability• Cold-cure characteristics• VOC compliance• Durability• Easy application• Cost-effective
SIGMACOVER APPLICATIONS
The SIGMACOVER range of protective coatings is widely used. They are trusted to meet the challenges in corrosiveindustrial environments.
INFRASTRUCTURE• Bridges• Port and harbour structures• Waste and water facilities
PETROCHEMICAL• Structural steel• Tank externals
POWER• Power plants• Wind turbines
OFFSHORE• Coastal structures• Drillings rigs• FPSOs• Offshore platforms
CIVIL BUILDING• Airports• Shopping centres• Sport complexes
www.sigmacoatings.com/protective
THE SIGMACOVER RANGE
SIGMACOVER 1500Solvent-free epoxy, compatible with most aged coatings
SIGMACOVER 1000Solvent-free, high-build, one-coat maintenance epoxy
SIGMACOVER 805High-solids epoxy, applied directly to steel
SIGMACOVER 640High-solids, multi-functional maintenance epoxy.Available in aluminium and a wide range of colours.Low-temperature cure option
SIGMACOVER 630High-solids, surface-tolerant epoxy. Available in aluminiumand a wide range of colours. Low-temperature cure option
SIGMACOVER 522Micaceous iron oxide-pigmented epoxy sealer/coating forzinc-rich and metal-sprayed surfaces
SIGMACOVER 480Chemical, impact and abrasion resistant epoxy finish
SIGMACOVER 456Recoatable epoxy coating, curing at temperatures down to -10°C
SIGMACOVER 435Low-temperature micaceous iron oxide-pigmented recoatable epoxy coating. Heat resistance up to 200°C
SIGMACOVER 410Economical epoxy buildcoat. Low-temperature cure option
SIGMACOVER 380Aluminium-reinforced, surface-tolerant epoxy
SIGMACOVER 350Glossy, surface-tolerant epoxy primer/coating
SIGMACOVER 280Universal epoxy primer for steel and non-ferrous materials
SIGMACOVER 256Unlimited recoatable epoxy primer with zinc phosphate.Cold-cure down to -10°C
SIGMACOVER 240Recoatable surface-tolerant epoxy. Cold cure down to -20°C
SIGMACOVER 211Epoxy primer and sealer specifically designed for concrete substrates
PRIMERS AND SEALERS
SIGMACOVER 522Micaceous iron oxide-pigmented epoxy coating
Specifically designed as sealer for zinc-rich and thermalmetal-sprayed surfaces. SIGMACOVER 522 can be used as a primer and sealer or coating on steel, thermal metal-sprayzinc and galvanizing. It can be used for both atmosphericand immersion applications.
• Primer and sealer in one• Good abrasion and impact resistance• Resistant to temperatures up to 200°C in dry atmospheric conditions
SIGMACOVER 280Universal epoxy primer for steel and non-ferrous materials
As a general-purpose primer for atmospheric and immersion applications, SIGMACOVER 280 offers excellent adhesion tonon-ferrous substrates and galvanized steel. It is compatible with most well-designed cathodic protection systems and is suitable for use on wet blast substrates (wet or dry).
• Excellent anticorrosive properties• Long recoating intervals• Low-temperature cure version allows curing down to -10°C
SIGMACOVER 256Zinc phosphate recoatable epoxy primer
Ideal for atmospheric applications, SIGMACOVER 256 is ableto withstand extreme variations in weather conditions.It provides excellent corrosion resistance in both industrialand coastal applications.
• Good adhesion to galvanized steel• Cold-cure characteristics down to -10°C with unlimited recoatability• Easy application by brush, roller and spray
SIGMACOVER 211Epoxy primer and sealer for concrete
Specifically designed for concrete substrates, SIGMACOVER 211 can be used as either a primer or sealer.
• Good chemical resistance• Good impact and abrasion resistance
SIGMACOVER™ RECOATABLE EPOXY SYSTEMS
BUILDCOATS
SIGMACOVER 805High-solids epoxy
Delivering excellent corrosion resistance in both industrial and coastal applications, SIGMACOVER 805 can be applied directly to metal and is compatible with most well-designed cathodic protection systems.
• Direct to metal, tar-free replacement for tar epoxy• Good abrasion resistance• Outstanding seawater resistance
SIGMACOVER 480Epoxy finish with good chemical resistance
SIGMACOVER 480 is a general general-purpose epoxyproviding an excellent chemical resistant finish.
• Resistant to impact and abrasion• Extended recoating intervals and a lasting clean finish• Easy application by brush, roller and spray
SIGMACOVER 456Unlimited recoatable epoxy coating
Compatible with a range of aged alkyds, chlorinated rubbers and epoxy coatings, SIGMACOVER 456 is ideal for asset maintenance. It has an unlimited topcoating time.
• Excellent durability, tough and with long-term flexibility• Cold-cure characteristics down to -10°C with unlimited recoatability• Easy to apply by brush, roller and spray
SIGMACOVER 435Micaceous iron oxide-pigmented recoatable epoxy coating
With good adhesion to aged alkyds, chlorinated rubber and epoxy coatings, SIGMACOVER 435 offers unlimited recoatability, making it ideal for asset maintenance.
• Excellent durability, tough with long-term flexibility• Cold-cure characteristics down to -10°C with unlimited recoatability• Temperature resistance up to 200°C
SIGMACOVER 410Economical epoxy buildcoat for use in atmospheric conditions
Ideal for use in atmospheric land and marine conditions, SIGMACOVER 410 can be recoated with two-pack and conventional coatings, even after prolonged weathering conditions. It is available in micaceous iron oxide and ina selected colour range.
• Excellent durability on steel or concrete• Easy application by airless spray• Low-temperature cure version allows curing down to -5°C
www.sigmacoatings.com/protective
SURFACE-TOLERANT COATINGS
SIGMACOVER 1500Solvent-free maintenance epoxy
SIGMACOVER 1500 is a surface-tolerant epoxy coating that has been specially designed to facilitate easy maintenance. It is compatible with most aged coatings and is ideal for use in sensitive locations. SIGMACOVER 1500 reduces explosion risk and fire hazard. It also protects workers and the environment by minimising solvent exposure during application.
• Primer and buildcoat• Solvent-free• Compatible with most aged coatings• Excellent corrosion resistance in industrial and coastal applications
SIGMACOVER 1000High-build, solvent-free epoxy
SIGMACOVER 1000 is an ultra-high-build coating that provides up to 1000 microns in just one coat. It provides ultimate protection in both atmospheric and immersion applications.
• Single-coat protection• Can be immersed after only 4 hours ambient cure• Applied by heavy-duty, single-feed airless equipment
SIGMACOVER 640High-solids epoxy coating
SIGMACOVER 640 is a universal self-priming coating.It exhibits excellent surface-tolerant characteristicsand is low-VOC. SIGMACOVER 640 is suitable for use in awide range of industrial, coastal and offshore applications.
• Self-priming, surface-tolerant epoxy• Available in aluminium and a wide range of colours• Convenient 1:1 mixing ratio by volume• Low-temperature cure version available
SIGMACOVER 630High-solids epoxy coating
As a primer and buildcoat compatible with most aged coatings, SIGMACOVER 630 is a cost-effective protective and maintenance solution. It delivers excellent corrosion resistance in industrial and coastal applications.
• Primer and buildcoat• Available in aluminium and a wide range of colours• Good impact and abrasion resistance• Resistance to splash and spillage of a wide variety of chemicals• Low-temperature and tropical-grade cure available
SIGMACOVER 380Multipurpose, high-build epoxy priming system
SIGMACOVER 380 can be used in a wide range of applications and is suitable for permanent immersion service.
• Aluminium reinforced surface-tolerant epoxy• Suitable for permanent immersion• Good anticorrosive properties and water resistance• Resistant to well-designed cathodic protection• Suitable for both newbuilding and maintenance applications
SIGMACOVER 350Two-component, high-build epoxy coating
SIGMACOVER 350 is a surface-tolerant maintenance coating.It provides excellent impact, abrasion and corrosion resistance, is fast-curing and is compatible with most aged coatings.
• Glossy surface-tolerant epoxy primer/coating• Good abrasion resistance• Fast-curing• Resistant to splash and spillage of a wide range of chemicals• Light colour, with a smooth and glossy appearance enhances cleaning and inspection
SIGMACOVER 240High-solids, low-temperature cure epoxy
SIGMACOVER 240 is a two-component, high-solids epoxy coating; it can be applied directly to metallic surfaces. It dries quickly at low temperatures and delivers excellent resistance against seawater, chemically polluted water and crude oil.
• Outstanding seawater and crude oil resistance• Cold-cure characteristics down to -20°C• Good abrasion resistance• Recoatable up to 6 months
SIGMACOVER™ RECOATABLE EPOXY SYSTEMS
SIGMACOVER RANGE CHARACTERISTICS
www.sigmacoatings.com/protective
PRIMERS AND SEALERS
SIGMACOVER 522
SIGMACOVER 280
SIGMACOVER 256
SIGMACOVER 211
Corrosionresistance
NA
••••
•••
NA
Temperature resistance
••••
••
••
••
Touch-dry
••
•••
••
•••••
Low-temperature
cure
•
••
••••
•
Recoatability
•
•••
•••••
•
Film build(μm)
40-80
50-100
75-150
35
Volumesolids (%)
60
57
63
51
BUILDCOATS
SIGMACOVER 805
SIGMACOVER 480
SIGMACOVER 456
SIGMACOVER 435
SIGMACOVER 410
Corrosionresistance
••••
NA
NA
••
NA
Touch-dry
•••
•••••
••••
••••
•••
Low-temperature
cure
•
•
••••
•••
••
Recoatability
••
•••
•••••
•••••
••••
Film build(μm)
150
50
75-150
75-150
75-150
Volumesolids (%)
82
50
65
63
80
SURFACE-TOLERANT COATINGS
SIGMACOVER 1500
SIGMACOVER 1000
SIGMACOVER 640
SIGMACOVER 630
SIGMACOVER 380
SIGMACOVER 350
SIGMACOVER 240
Corrosionresistance
••••
••••
•••
••
••
••
••
Temperature resistance
NA
NA
NA
NA
NA
••
NA
Surface tolerance
••••
•••
••••
•••
•••
•••
•••
Touch-dry
•
•
••
••
•••
••••
•••
Low-temperature
cure
•
•
••
••
•••
•••
••••
Recoatability
••
••
•••
••
••
••••
•••
Film build(μm)
125-150
1000
100-200
60-100
125-200
125-150
100-300
Volumesolids (%)
99
100
87
83
80
72
87
No rights can be derived from the content of this publication. Unless otherwise agreed upon in writing, all products and technical advice given are subject to general terms and conditions of PPG Coatings BVBA. All rights reserved. All trademarks or registered trademarks are the property of their respective owners.
PPG Protective & Marine CoatingsP.O. Box 580341040 HA AmsterdamThe NetherlandsTel : +31 (0)20 407 5050 Fax : +31 (0)20 407 5059Email: [email protected]: www.sigmacoatings.com/protective 982978
PPG Protective & Marine Coatings brings unrivalled levels of
innovation, experience and expertise in coatings technology,
supported through our expanding global supply and distributors’
network in over 80 countries.
We have in-depth knowledge of the industry, our customers’
day-to-day challenges and the environmental, health and safety
standards in the marketplace. By working in close partnership
with customers, our technical service representatives are able to
offer an unsurpassed level of market knowledge. This enables us
to respond quickly with efficient, economic solutions in all
environments and industries.
The result – performance-enhancing coating systems that can
be applied more easily, resist the elements more effectively,
and deliver maximum performance with minimum downtime.
PPG PROTECTIVE & MARINE COATINGS
Created July 2011