STIHL BR 200 Instruction Manual

Orig

inal

Inst

ruct

ion

Man

ual

Prin

ted

on c

hlor

ine-

free

pape

rPr

intin

g in

ks c

onta

in v

eget

able

oils

, pap

er c

an b

e re

cycl

ed.

© A

ND

REA

S ST

IHL

AG &

Co.

KG

, 201

904

58-4

55-0

121-

C. V

A1.A

19.

0000

0086

99_0

02_G

B

BR 200

English

1

This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process with electronic systems.

Contents

Dear Customer,

Thank you for choosing a quality engineered STIHL product.

It has been built using modern production techniques and comprehensive quality assurance. Every effort has been made to ensure your satisfaction and trouble-free use of the product.

Please contact your dealer or our sales company if you have any queries concerning this product.

Your

Dr. Nikolas Stihl

Guide to Using this Manual 2Safety Precautions and Working Techniques 2Assembling the Unit 7Adjusting the Throttle Cable 8Fitting the Harness 8Fuel 9Fueling 10Information Before You Start 10Starting / Stopping the Engine 11Operating Instructions 13Cleaning the Air Filter 13Adjusting the Carburetor 14Catalytic Converter 14Spark Plug 15Engine Running Behavior 16Storing the Machine 16Maintenance and Care 17Minimize Wear and Avoid Damage 19Main Parts 20Specifications 21Maintenance and Repairs 22Disposal 22EC Declaration of Conformity 22

BR 200

English

2

Pictograms

The meanings of the pictograms attached to the machine are explained in this manual.

Depending on the model concerned, the following pictograms may be attached to your machine.

Symbols in text

WARNING

Warning where there is a risk of an accident or personal injury or serious damage to property.

NOTICE

Caution where there is a risk of damaging the machine or its individual components.

Engineering improvements

STIHL's philosophy is to continually improve all of its products. For this reason we may modify the design, engineering and appearance of our products periodically.

Therefore, some changes, modifications and improvements may not be covered in this manual.

Observe all applicable local safety regulations, standards and ordinances.

If you have not used this model before: Have your dealer or other experienced user show you how it is operated or attend a special course in its operation.

Minors should never be allowed to use this product.

Keep bystanders, especially children, and animals away from the work area.

When the power tool is not in use, put it in a place where it does not endanger others. Secure it against unauthorized use.

The user is responsible for avoiding injury to third parties or damage to their property.

Do not lend or rent your power tool without the instruction manual. Be sure that anyone using your power tool understands the information contained in this manual.

Guide to Using this Manual

Fuel tank; fuel mixture of gasoline and engine oil

Operate manual fuel pump

Safety Precautions and Working Techniques

Special safety precau-tions must be observed when working with a power tool.

It is important that you read the instruction man-ual before first use and keep it in a safe place for future reference. Non-observance of the instruction manual may result in serious or even fatal injury.

BR 200

English

3

The use of noise emitting power tools may be restricted to certain times by national or local regulations.

Do not operate your power tool if any of its components are damaged.

Do not use a pressure washer to clean your power tool. The solid jet of water may damage parts of the power tool.

Accessories and Spare Parts

Only use parts and accessories that are explicitly approved for this power tool by STIHL or are technically identical. If you have any questions in this respect, consult a servicing dealer. Use only high quality parts and accessories in order to avoid the risk of accidents and damage to the machine.

STIHL recommends the use of original STIHL replacement parts and accessories. They are specifically designed to match the product and meet your performance requirements.

Never attempt to modify your machine in any way since this may increase the risk of personal injury. STIHL excludes all liability for personal injury and damage to property caused while using unauthorized attachments.

Physical Condition

To operate this power tool you must be rested, in good physical condition and mental health.

If you have any condition that might be aggravated by strenuous work, check with your doctor before operating a power tool.

Persons with pacemakers only: The ignition system of your power tool produces an electromagnetic field of a very low intensity. This field may interfere with some pacemakers. To reduce health risks, STIHL recommends that persons with pacemakers consult their physician and the pacemaker manufacturer before operating this power tool.

Do not operate the sprayer if you are under the influence of any substance (drugs, alcohol) which might impair vision, dexterity or judgment.

Intended Use

The blower is designed for blow-sweeping leaves, grass, paper and similar materials, e.g. in gardens, sports stadiums, car parks and driveways. It is also suitable for blow-sweeping forest paths.

Do not blow-sweep hazardous materials.

Do not use the machine for any other purpose because of the increased risk of accidents and damage to the machine. Never attempt to modify the product in any way since this may result in accidents or damage to the product.

Clothing and Equipment

Wear proper protective clothing and equipment.

Wear sturdy shoes with non-slip soles.

WARNING

Wear hearing protection, e.g. earplugs or ear muffs.

STIHL offers a comprehensive range of personal protective clothing and equipment.

Transporting the Power Tool

Always stop the engine.

Transporting in a vehicle:

– Properly secure your power tool to prevent turnover, fuel spillage and damage.

Clothing must be sturdy but allow complete free-dom of movement. Wear snug-fitting clothing, an overall and jacket combi-nation, do not wear a work coat.

Avoid any clothing, scarves, neckties, jew-elery or anything that could get into the air intake. Tie up and confine long hair (e.g. with a hair net, cap, hard hat, etc.).

To reduce the risk of eye injuries, wear close-fit-ting safety glasses in accordance with Euro-pean Standard EN 166. Make sure the safety glasses are a comforta-ble and snug fit.

BR 200

English

4

Fueling

Always shut off the engine before refueling.

Do not fuel a hot engine – fuel may spill and cause a fire.

Always remove the power tool from your back and put it on the ground before refueling. Fuel the unit only when it is standing on the ground.

Open the fuel cap carefully to allow any pressure build-up in the tank to release slowly and avoid fuel spillage.

Fuel your power tool only in well-ventilated areas. If you spill fuel, wipe the machine immediately – if fuel gets on your clothing, change immediately.

Screw-type fuel cap

Never use a tool to open or close the screw-type fuel cap. This may damage the cap and cause fuel leakage.

Before Starting

Check that your power tool is properly assembled and in good condition – refer to appropriate chapters in the instruction manual.

– Check the fuel system for leaks, paying special attention to visible parts such as the tank cap, hose connections and the manual fuel pump (on machines so equipped). If there are any leaks or damage, do not start the engine – risk of fire. Have your machine repaired by a servicing dealer before using it again.

– Throttle trigger must move freely and spring back to the idle position when released.

– The setting lever must move easily to STOP or †

– The blower tubes must be properly assembled.

– Keep the handles dry and clean – free from oil and dirt – for safe control of the power tool.

– Check that the spark plug boot is secure – a loose boot may cause arcing that could ignite combustible fumes and cause a fire.

– Never attempt to modify the controls or the safety devices in any way.

– Check condition of blower housing.

– Check condition of harness straps and replace damaged or worn straps.

A worn blower housing (cracks, nicks, chips) may result in an increased risk of injury from thrown foreign objects. If the

blower housing is damaged, consult your dealer – STIHL recommends you contact a STIHL servicing dealer.

To reduce the risk of accidents, do not operate your power tool if it is not properly assembled and in good condition.

For emergencies: Practice quickly releasing the shoulder straps and taking the unit off your back.

Starting the Engine

Start the engine at least 3 meters from the fueling spot, outdoors only.

Your power tool is designed to be operated by one person only. Do not allow other persons in the work area – even when starting.

Do not drop start the power tool – start the engine as described in the instruction manual.

Place the power tool on level ground, make sure you have secure footing, hold the power tool securely.

As soon as the engine starts, the air flow may throw small objects (e.g. stones) in your direction.

During Operation

In the event of impending danger or in an emergency, switch off the engine immediately by moving the setting lever to STOP or †.

Gasoline is an extremely flammable fuel. Keep clear of naked flames. Do not spill any fuel – do not smoke.

Check for leakage. To reduce the risk of serious of fatal burn injuries, do not start or run the engine until leak is fixed.

After fueling, tighten down the screw-type fuel cap as securely as possible.

BR 200

English

5

To reduce the risk of damage to property, also maintain this distance from other objects (vehicles, windows).

When blow-sweeping (in open ground and gardens), watch out for small animals to avoid harming them.

Never leave a running machine unattended.

Take special care in slippery conditions – damp, snow, ice, on slopes and uneven ground.

Watch out for obstacles: Be careful of refuse, tree stumps, roots and ditches which could cause you to trip or stumble.

Never work on a ladder or any other insecure support.

Be particularly alert and cautious when wearing hearing protection because your ability to hear warnings (shouts, alarms, etc.) is restricted.

Work calmly and carefully – in daylight conditions and only when visibility is good. Stay alert so as not to endanger others.

To reduce the risk of accidents, take a break in good time to avoid tiredness or exhaustion.

Mufflers with a catalytic converter can become particularly hot.

To reduce the risk of serious or fatal injury from breathing toxic fumes, ensure proper ventilation when working in trenches, hollows or other confined locations.

To reduce the risk of accidents, stop work immediately in the event of nausea, headache, visual disturbances (e.g. reduced field of vision), problems with hearing, dizziness, deterioration in ability to concentrate. Apart from other possibilities, these symptoms may be caused by an excessively high concentration of exhaust gases in the work area.

To reduce the risk of fire, do not smoke while operating or standing near your power tool. Note that combustible fuel vapor may escape from the fuel system.

If dust levels are very high, always wear a suitable respirator.

Operate your power tool so that it produces a minimum of noise and emissions – do not run the engine unnecessarily, accelerate the engine only when working.

After finishing work, put the unit down on a level, non-flammable surface. To reduce the risk of fire, do not put it down near easily combustible materials (e.g. wood chips, bark, dry grass, fuel).

If your power tool is subjected to unusually high loads for which it was not designed (e.g. heavy impact or a fall), always check that it is in good condition before continuing work – see also "Before Starting Work". Check the fuel system in particular for leaks and make sure the safety devices are working properly. Do not continue operating your power tool if it is damaged. In case of doubt, consult your servicing dealer.

Using the Blower

The machine is carried as a backpack. Hold and control the blower tube with your right hand on the control handle.

Walk slowly forwards as you work – observe the nozzle outlet at all times – do not walk backwards – risk of stumbling.

Always shut off the engine before taking the unit off your back.

To reduce the risk of injury from thrown objects, do not allow any other persons within 15 meters of your own position.

Do not direct the air blast towards bystanders or animals since the air flow can blow small objects at great speed.

Your power tool produces toxic exhaust fumes as soon as the engine is running. These fumes may be colorless and odorless and contain unburned hydrocarbons and benzol. Never run the engine indoors or in poorly ventilated loca-tions, even if your model is equipped with a cata-lytic converter.

0009

BA00

1 KN

BR 200

English

6

Working Technique

To minimize blowing time, use a rake and broom to loosen dirt particles before you start blowing.

Recommended working technique to minimize air pollution:

– If necessary, dampen the surface to be cleaned in order to avoid creating too much dust.

– Do not blow particles in the direction of bystanders, in particular in the direction of children, pets, open windows or freshly washed vehicles. Take special care in such situations.

– Remove the blow-swept debris in rubbish bins – do not blow it onto the neighbor's land.

Recommended working technique to minimize noise:

– Operate your power tool at reasonable times only – not early in the morning, late at night or during midday rest periods when people could be disturbed. Observe local rest periods.

– Operate blowers at the lowest engine speed necessary to accomplish the task.

– Check your blower before starting work. Pay special attention to the muffler, air intakes and air filter.

Vibrations

Prolonged use of the power tool may result in vibration-induced circulation problems in the hands (whitefinger disease).

No general recommendation can be given for the length of usage because it depends on several factors.

The period of usage is prolonged by:

– Keeping your hands warm

– Work breaks

The period of usage is shortened by:

– Any personal tendency to suffer from poor circulation (symptoms: frequently cold fingers, itching).

– Low outside temperatures.

– Gripping force (a tight grip hinders circulation).

Continual and regular users should monitor closely the condition of their hands and fingers. If any of the above symptoms appear (e.g. tingling sensation in fingers), seek medical advice.

Maintenance and Repairs

Service the machine regularly. Do not attempt any maintenance or repair work not described in the instruction manual. Have all other work performed by a servicing dealer.

STIHL recommends that you have servicing and repair work carried out exclusively by an authorized STIHL servicing dealer. STIHL dealers are

regularly given the opportunity to attend training courses and are supplied with the necessary technical information.

Only use high-quality replacement parts in order to avoid the risk of accidents and damage to the machine. If you have any questions in this respect, consult a servicing dealer.

STIHL recommends the use of genuine STIHL replacement parts. They are specifically designed to match your model and meet your performance requirements.

To reduce the risk of injury, always shut off the engine before carrying out any maintenance or repairs or cleaning the machine. – Exception: Carburetor and idle speed adjustments.

Do not turn the engine over on the starter with the spark plug boot or spark plug removed since there is otherwise a risk of fire from uncontained sparking.

Do not service or store your machine near open flames.

Check the fuel filler cap for leaks at regular intervals.

Use only a spark plug of the type approved by STIHL and make sure it is in good condition – see "Specifications".

Inspect the ignition lead (insulation in good condition, secure connection).

Check the condition of the muffler.

To reduce the risk of fire and damage to hearing, do not operate your machine if the muffler is damaged or missing.

Do not touch a hot muffler since burn injury will result.

BR 200

English

7

Vibration behavior is influenced by the condition of the AV elements – check the AV elements at regular intervals.

Shut off the engine before rectifying problems.

A screwdriver is included in the accessory bag provided.

Fitting the Pleated Hose on the Elbow

N Open the hose clamp (1) and fit it on the pleated hose (2).

N Engage the tab in the recess.

N Push the pleated hose (2) over the slip ring (3) as far as stop.

N Line up the hose clamp (1) and slip ring (3) – as shown.

N Tighten down the screw (arrow).

Mounting the Blower Tube and Nozzle

N Connect the blower tube (1) and nozzle (2).

N Connect the blower tube (1) to tube (3).

Assembling the Unit

1 2

99

28

BA

00

1 A

M

1

0000

-GXX

-203

6-A0

3

2

0000

-GXX

-203

7-A0

2

9928

BA02

1 KN

1

1

9928

BA02

2 KN

3

BR 200

English

8

Mounting the Control Handle

N Pull the ends of the clamp on the control handle (6) apart and push it over stub of pleated hose (2).

N Attach throttle cable to retainer on the hose clamp (1).

Adjusting the Control Handle

N Put the machine on your back and adjust the harness – see "Fitting the Harness".

N Push the blower tube (4) into the stub of pleated hose (2) as far as the stop.

N Move the control handle (6) along the tube to the most comfortable position.

N Tighten down the screw on the control handle (6).

It may be necessary to correct the adjustment of the throttle cable after assembling the machine or after a prolonged period of operation.

Adjust the throttle cable only when the unit is completely and properly assembled.

N Set throttle trigger to the full throttle position – as far as stop.

N Carefully rotate the screw in the throttle trigger in the direction of the arrow until you feel initial resistance. Then rotate it another full turn.

Adjusting the Harness

N Pull the ends of the straps downwards to tighten the harness.

Loosening the Harness

N Lift the tabs of the sliding adjusters.

N Adjust the harness so that the backplate fits snugly and securely against your back.

1

62

99

28

BA

00

4 A

M

2 46

99

28

BA

00

5 A

M

Adjusting the Throttle Cable

0009

BA00

8 KN

Fitting the Harness

37

3B

A0

03

KN

373B

A004 K

N

BR 200

English

9

Your engine requires a mixture of gasoline and engine oil.

WARNING

For health reasons, avoid direct skin contact with gasoline and avoid inhaling gasoline vapor.

STIHL MotoMix

STIHL recommends the use of STIHL MotoMix. This ready-to-use fuel mix contains no benzol or lead, has a high octane rating and ensures that you always use the right mix ratio.

STIHL MotoMix uses STIHL HP Ultra two-stroke engine oil for an extra long engine life.

MotoMix is not available in all markets.

Mixing Fuel

NOTICE

Unsuitable fuels or lubricants or mix ratios other than those specified may result in serious damage to the engine. Poor quality gasoline or engine oil may damage the engine, sealing rings, hoses and the fuel tank.

Gasoline

Use only high-quality brand-name gasoline with a minimum octane rating of 90 – leaded or unleaded.

Gasoline with an ethanol content of more than 10% can cause running problems in engines with a manually adjustable carburetor and should not be used in such engines.

Engines equipped with M-Tronic deliver full power when run on gasoline with an ethanol content of up to 25% (E25).

Engine Oil

If you mix the fuel yourself, use only STIHL two-stroke engine oil or another high-performance engine oil in accordance with JASO FB, JASO FC, JASO FD, ISO-L-EGB, ISO-L-EGC or ISO-L-EGD.

STIHL specifies STIHL HP Ultra two-stroke engine oil or an equivalent high-performance engine oil in order to maintain emission limits over the machine’s service life.

Mix Ratio

STIHL 50:1 two-stroke engine oil: 50 parts gasoline to 1 part oil

Examples

N Use a canister approved for storing fuel. Pour oil into canister first, then add gasoline and mix thoroughly.

Storing Fuel

Store fuel only in approved safety-type fuel canisters in a dry, cool and safe location protected from light and the sun.

Fuel mix ages – only mix sufficient fuel for a few weeks work. Do not store fuel mix for longer than 30 days. Exposure to light, the sun, low or high temperatures can quickly make the fuel mix unusable.

STIHL MotoMix may be stored for up to 2 years without any problems.

N Thoroughly shake the mixture in the canister before fueling your machine.

WARNING

Pressure may build up in the canister – open it carefully.

N Clean the fuel tank and canister from time to time.

Dispose of remaining fuel and cleaning fluid properly in accordance with local regulations and environmental requirements.

Fuel

Gasoline STIHL engine oil 50:1 Liters Liters (ml)1 0.02 (20)5 0.10 (100)10 0.20 (200)15 0.30 (300)20 0.40 (400)25 0.50 (500)

BR 200

English

10

Preparations

N Before fueling, clean the filler cap and the area around it to ensure that no dirt falls into the tank.

Opening screw-type tank cap

N Turn the cap counterclockwise until it can be removed from the tank opening.

N Remove the cap.

Filling up with fuel

Take care not to spill fuel while fueling and do not overfill the tank. STIHL recommends you use the STIHL filler nozzle (special accessory).

Closing screw-type tank cap

N Place the cap in the opening.

N Turn the cap clockwise as far as stop and tighten it down as firmly as possible by hand.

NOTICE

With the engine stopped and before starting, check the air intakes between the backplate and powerhead for blockages and clean if necessary.

Functions of setting lever

Run position F

Engine runs or is ready to start. Throttle trigger (2) can be moved to any position.

Switch off engine †

Ignition is interrupted, engine stops. The setting lever (1) is not locked in this position. It springs back to the run position F. The ignition is switched on again.

Fueling

99

28

BA

01

8 A

M00

2BA4

47 K

N

002B

A448

KN

Information Before You Start

2

1

0009

BA00

9 KN

BR 200

English

11

Fixed throttle

The throttle trigger (2) can be locked in any position by operating the setting lever (1).

To disengage the lock:

N Return the setting lever (1) to the run position F.

Starting the Engine

N Observe safety precautions.

NOTICE

Start your unit on a clean, dust-free surface only to ensure that no dust is sucked in.

N Move the setting lever the run position F.

N Press the manual fuel pump bulb at least five times – even if the bulb is filled with fuel.

Cold engine (cold start)

N Turn the choke knob to g.

Warm engine (warm start)

N Turn the choke knob to <.

Also use this setting if the engine has been running but is still cold.

2

1

0009

BA01

0 KN

Starting / Stopping the Engine

0009

BA01

1 KN

99

28

BA

00

6 A

M

99

28

BA

00

7 A

M9

92

8B

A0

08

AM

BR 200

English

12

Starting

N Place the unit securely on the ground and make sure that bystanders are well clear of the nozzle outlet.

N Make sure you have a firm footing: Hold the unit with your left hand on the carrying handle and put one foot against the base plate to prevent it slipping.

N Pull the starter grip slowly with your right hand until you feel it engage and then give it a brisk strong pull. Do not pull out the starter rope to full length – it might otherwise break.

N Do not let the starter grip snap back. Guide it slowly back into the housing so that the starter rope can rewind properly.

N Continue cranking until the engine runs.

Other hints on starting

If the engine stops while the choke knob in on g or during acceleration

N Move the choke knob to < and continue cranking until the engine runs.

If the engine does not start

N Make sure all settings are correct (choke knob, setting lever in run position F).

N Repeat the starting procedure.

If fuel tank has been run completely dry and then refueled

N Press the manual fuel pump bulb at least five times – even if the bulb is filled with fuel.

As soon as the engine runs

N Operate the throttle trigger.

N Choke knob automatically returns to the run position F when the throttle trigger is operated.

At very low outside temperatures

N Open throttle slightly – warm up the engine for a short period.

99

28

BA

01

5 A

M

99

28

BA

00

6 A

M

0009

BA01

6 KN

99

28

BA

00

9 A

M

BR 200

English

13

Shut off the engine.

N Move the setting lever in the direction of † – the engine stops – the setting lever springs back to the on position.

During Operation

After a long period of full throttle operation, allow the engine to run for a short while at idle speed so that engine heat can be dissipated by the flow of cooling air. This helps protect engine-mounted components (ignition, carburetor) from thermal overload.

After Finishing Work

Storing for a short period: Wait for the engine to cool down. Keep the machine in a dry place, well away from sources of ignition, until you need it again. For longer out-of-service periods – see "Storing the Machine".

If there is a noticeable loss of engine power

N Turn the filter cover lock (1) counterclockwise to the vertical position.

N Remove the filter cover (2).

N Clean away loose dirt from around the filter.

N Pull off the adapter (3) and remove the filter (4).

N Fit a new filter element. As a temporary measure you can knock it out on the palm of your hand or blow it out with compressed air. Do not wash.

Replace any damaged parts.

0009

BA01

8 KN

Operating Instructions Cleaning the Air Filter

2431

BA02

0 KN

1

23

4

99

28

BA

011

AM

BR 200

English

14

Install the filter element.

N Fit the filter in the filter housing and push the retainer into position.

N Refit the filter cover and turn the filter cover lock to the horizontal position

The carburetor has been set at the factory to provide an optimum fuel-air mixture under most operating conditions.

Adjusting Idle Speed

Engine stops while idling

N Turn the idle speed screw (LA) clockwise until the engine runs smoothly.

Power tools with a catalytic converter (depending on model) must be run on a 50 : 1 mixture of unleaded gasoline and STIHL two-stroke engine oil or equivalent two-stroke engine oil – see chapter on "Fuel".

The catayltic converter integrated in the muffler reduces the harmful emissions in the exhaust gas.

The correct carburetor setting (if adjustable) and strict observance of the prescribed mix ratio of gasoline and two-stroke engine oil are essential to minimize harmful emissions and ensure a long catalytic converter service life.

Adjusting the Carburetor

0000-G

XX

-7919-A

0

Catalytic Converter

BR 200

English

15

N If the engine is down on power, difficult to start or runs poorly at idle speed, first check the spark plug.

N Fit a new spark plug after about 100 operating hours – or sooner if the electrodes are badly eroded. Install only suppressed spark plugs of the type approved by STIHL – see "Specifications".

Removing the Spark Plug

N Pull off the spark plug boot (1).

N Unscrew the spark plug.

Checking the Spark Plug

N Clean dirty spark plug.

N Check electrode gap (A) and readjust if necessary – see "Specifications".

N Rectify the problems which have caused fouling of the spark plug.

Possible causes are:

– Too much oil in fuel mix.

– Dirty air filter.

– Unfavorable running conditions.

WARNING

Arcing may occur if the adapter nut (1) is loose or missing. Working in an easily combustible or explosive atmosphere may cause a fire or an explosion. This can result result in serious injuries or damage to property.

N Use resistor type spark plugs with a properly tightened adapter nut.

Installing the spark plug

N Screw home the spark plug, fit the boot and press it down firmly.

Spark Plug

1

99

28

BA

01

4 A

M

00

0B

A0

39

KN

A

1

000B

A045 K

N

BR 200

English

16

If engine running behavior is unsatisfactory even though the air filter is clean and the carburetor is properly adjusted, the cause may be the muffler.

Have the muffler checked for contamination (carbonization) by your servicing dealer.

STIHL recommends that you have servicing and repair work carried out exclusively by an authorized STIHL servicing dealer.

For periods of 3 months or longer

N Drain and clean the fuel tank in a well ventilated area.

N Dispose of fuel properly in accordance with local environmental requirements.

N Run the engine until the carburetor is dry – this helps prevent the carburetor diaphragms sticking together.

N Thoroughly clean the machine – pay special attention to the cylinder fins and air filter.

N Store the machine in a dry, high or locked location, – out of the reach of children and other unauthorized persons.

Engine Running Behavior Storing the Machine

BR 200

English

17

Maintenance and Care

The following intervals apply to normal operating conditions only. If your daily work-ing time is longer or operating conditions are difficult (very dusty work area, etc.), shorten the specified intervals accordingly.

befo

re s

tarti

ng w

ork

afte

r fin

ishi

ng w

ork

or d

aily

afte

r eac

h re

fuel

ing

stop

wee

kly

mon

thly

ever

y 12

mon

ths

if pr

oble

m

if da

mag

ed

as re

quire

d

Complete machineVisual inspection (condition, leaks) X X

Clean X

Control handle Check operation X X

Air filterClean X

Replace X

Manual fuel pumpCheck X

Have repaired by servicing dealer1) X

Pickup body in fuel tankHave checked by servicing dealer1) X

Have replaced by servicing dealer1) X X

Fuel tank Clean X

CarburetorCheck idle adjustment X X

Readjust idle X

Spark plugReadjust electrode gap X

Replace after every 100 operating hours

Cooling inletVisual inspection X

Clean X

All accessible screws and nuts (not adjust-ing screws) Retighten X

Anti-vibration elementsCheck X X X

Have replaced by servicing dealer 1) X

BR 200

English

18

Blower air intake screenCheck X X

Clean X

Throttle cable Adjust X

Safety labels Replace X1) STIHL recommends an authorized STIHL servicing dealer.

The following intervals apply to normal operating conditions only. If your daily work-ing time is longer or operating conditions are difficult (very dusty work area, etc.), shorten the specified intervals accordingly.

befo

re s

tarti

ng w

ork

afte

r fin

ishi

ng w

ork

or d

aily

afte

r eac

h re

fuel

ing

stop

wee

kly

mon

thly

ever

y 12

mon

ths

if pr

oble

m

if da

mag

ed

as re

quire

d

BR 200

English

19

Observing the instructions in this manual helps reduce the risk of unnecessary wear and damage to the power tool.

The power tool must be operated, maintained and stored with the due care and attention described in this owner's manual.

The user is responsible for all damage caused by non-observance of the safety precautions, operating and maintenance instructions in this manual. This includes in particular:

– Alterations or modifications to the product not approved by STIHL.

– Using tools or accessories which are neither approved or suitable for the product or are of a poor quality.

– Using the product for purposes for which it was not designed.

– Using the product for sports or competitive events.

– Consequential damage caused by continuing to use the product with defective components.

Maintenance Work

All the operations described in the "Maintenance Chart" must be performed on a regular basis. If these maintenance operations cannot be performed by the owner, they should be performed by a servicing dealer.

STIHL recommends that you have servicing and repair work carried out exclusively by an authorized STIHL

servicing dealer. STIHL dealers are regularly given the opportunity to attend training courses and are supplied with the necessary technical information.

If these maintenance operations are not carried out as specified, the user assumes responsibility for any damage that may occur. Among other parts, this includes:

– Damage to the engine due to neglect or deficient maintenance (e.g. air and fuel filters), incorrect carburetor adjustment or inadequate cleaning of cooling air inlets (intake ports, cylinder fins).

– Corrosion and other consequential damage resulting from improper storage.

– Damage to the machine resulting from the use of poor quality replacement parts.

Parts Subject to Wear and Tear

Some parts of the power tool are subject to normal wear and tear even during regular operation in accordance with instructions and, depending on the type and duration of use, have to be replaced in good time. Among other parts, this includes:

– Filters (air, fuel)

– Rewind starter

– Spark plug

– Damping elements of anti-vibration system

Minimize Wear and Avoid Damage

BR 200

English

20

1 Nozzle, curved2 Blower tube3 Blower tube4 Throttle trigger5 Setting lever6 Control handle7 Pleated hose8 Back padding9 Backplate10 Harness11 Carrying handle12 Muffler13 Starter grip14 Spark plug boot15 Manual fuel pump16 Carburetor adjusting screws17 Choke knob18 Filter cover19 Tank cap20 Fuel tank21 Spacer 1)

# Serial number

Main Parts

7

3

6

#

12

99

28BA

024

KN

8910

11

12

13

14

1516

1718

19

20

5

4

BR 200

English

21

Engine

Ignition System

Electronic magneto ignition

Fuel System

All position diaphragm carburetor with integral fuel pump

Blowing Performance

Weight

Noise and Vibration Data

Noise and vibration data are measured at idling and maximum rated speed in a ratio of 1:6.

For further details on compliance with Vibration Directive 2002/44/EC see www.stihl.com/vib/

Sound pressure level Lpeq to DIN EN 15503:2010

Sound power level Lweq to DIN EN 15503:2010

Vibration measurement ahv,eq to DIN EN 15503:2010

The K-factor in accordance with Directive 2006/42/EC is 2.0 dB(A) for the sound pressure level and sound power level; the K-factor in accordance with Directive 2006/42/EC is 2.0 m/s2 for the vibration level.

REACH

REACH is an EC regulation and stands for the Registration, Evaluation, Authorisation and Restriction of Chemical substances.

For information on compliance with the REACH regulation (EC) No. 1907/2006 see www.stihl.com/reach.

Exhaust Emissions

The CO2value measured in the EU type approval procedure is specified at www.stihl.com/co2.

The measured CO2value was determined on a representative engine in accordance with a standardized test procedure under laboratory conditions and does not represent either an explicit or implied guarantee of the performance of a specific engine.

The applicable exhaust emission requirements are fulfilled by the intended usage and maintenance described in this instruction manual. The type approval expires if the engine is modified in any way.

Specifications

STIHL single cylinder two-stroke engineDisplacement: 27.2 ccBore: 34 mmStroke: 30 mmIdle speed: 2,500 rpmEngine power to ISO 7293: 0.8 kW (1.1 bhp)

Spark plug (resistor type): NGK CMR 6 HElectrode gap: 0.5 mm

Fuel tank capacity: 1050 cc (1.05 l)

Blowing force: 12 NAir velocity: 56 m/sAir flow rate: 680 m3/hMaximum air velocity 67 m/sMaximum air flow rate with-out blower tube assembly: 800 m3/h

dry: 5.8 kg

96 dB(A)

103 dB(A)

Handle: 3.0 m/s2

BR 200

English

22

Users of this machine may only carry out the maintenance and service work described in this user manual. All other repairs must be carried out by a servicing dealer.

STIHL recommends that you have servicing and repair work carried out exclusively by an authorized STIHL servicing dealer. STIHL dealers are regularly given the opportunity to attend training courses and are supplied with the necessary technical information.

When repairing the machine, only use replacement parts which have been approved by STIHL for this power tool or are technically identical. Only use high-quality replacement parts in order to avoid the risk of accidents and damage to the machine.

STIHL recommends the use of original STIHL replacement parts.

Original STIHL parts can be identified by the STIHL part number, the { logo and the STIHL parts symbol K (the symbol may appear alone on small parts).

Observe all country-specific waste disposal rules and regulations.

STIHL products must not be thrown in the garbage can. Take the product, accessories and packaging to an approved disposal site for environment-friendly recycling.

Contact your STIHL servicing dealer for the latest information on waste disposal.

ANDREAS STIHL AG & Co. KGBadstr. 115D-71336 Waiblingen

Germany

declare in exclusive responsibility that the product

conforms to the provisions of Directives 2011/65/EU, 2006/42/EC, 2014/30/EU and 2000/14/EC and has been developed and manufactured in compliance with the following standards in the versions valid at the time of production:

EN ISO 12100, EN 15503, EN 55012, EN 61000-6-1

The measured and guaranteed sound power levels were determined according to Directive 2000/14/EC, Annex V, using the ISO 11094 standard.

Measured sound power level

Guaranteed sound power level

Technical documents deposited at:

ANDREAS STIHL AG & Co. KGProduktzulassung (Product Licensing)

The year of manufacture and serial number are applied to the product.

Maintenance and Repairs Disposal

000B

A073

KN

EC Declaration of Conformity

Category: BlowerMake: STIHLModel: BR 200Serial identification: 4241Displacement: 27.2 cc

103 dB(A)

105 dB(A)

BR 200

English

23

Done at Waiblingen, 27.11.2018

ANDREAS STIHL AG & Co. KG

Thomas Elsner

Director Product Management and Services

BR 200

English

24

www.stihl.com

*04584550121C*0458-455-0121-C

0458-455-0121-C

englischG