Date post: | 21-Jan-2023 |
Category: |
Documents |
Upload: | khangminh22 |
View: | 0 times |
Download: | 0 times |
1
2
3
4
TA
BLE O
F C
ON
TEN
TS
HOBART GMBH
EXPORT
PRODUCTS
1 WAREWASHING
2 FOOD PREPARATION
3 COOKING
4 GENERAL INFORMATION
1 Warewashing
1.1 Glass and Dishwasher
1.2 Tabling Programme
1.3 Rack Programme
1.4 Utensil Washer
1.5 Water Treatment and Chemicals
1.6 Warewash Systems
1.7 Compact Food Waste Equipment
1.8 Shipping Information
TABLE OF CONTENTS
1.1 Glass and Dishwasher
Glasswasher
Undercounter
GC - PROFI Compact Glasswasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
GCP - PREMAX Compact Glasswasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
GX - PROFI Glasswasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
GXC - PROFI Glasswasher. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
GP - PREMAX Glasswasher. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Glass and Dishwasher
Undercounter
FX - PROFI Dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
FXL - PROFI Dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
FP - PREMAX Dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Hood-type
AM900 - PROFI Glass and Dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
AMX - PROFI Glass and Dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
AMXR - PROFI Glass and Dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
AMXX - PROFI Glass and Dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
AMXXR - PROFI Glass and Dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
AMXXL - PROFI Glass and Dishwasher, Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
AMXT - PROFI Glass and Dishwasher, Double Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Glass, Dish and Utensil Washer
Hood-type
AUP - PREMAX Glass, Dish and Utensilwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
AUPL - PREMAX Dish and Utensilwasher, Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
AUPT - PREMAX Dish and Utensilwasher, Double Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
1.1 - 2 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• Compact glasswasher, ideal for
narrow places in restaurants, bars,
pubs, bistros, etc. Ideal for use
with integrable reverse osmosis
system HYDROLINE PURE RO-I for
undercounter installation. Total height
incl. RO-I 400: 820 mm
• VISIOTRONIC Control: ensures a
simple and intuitive operating with
a single button. When the display is
activated by a proximity sensor, all
the necessary information appears in
the large display, in clear text or in the
form of symbols
• Rinsing 1.9 l: water consumption
per cycle of only 1.9 l which results in
a reduction of water, chemicals and
energy consumption of 35 %
• CLIP-IN Wash and Rinse Arms:
both the wash and rinse arms can be
lifted out of the wash chamber and
replaced with one hand and without
any tools
• Intelligent data documentation:
automatic recording of important
operational data and consumptions
and indication on the display
• USB-interface: comfortable
download of operational data in form
of a protocol via USB
• Filter position sensor: prevents
operation without tank strainer
• GENIUS-X² Fine Filter System:
advanced filter system with pre-
wash function reduces detergent
consumption up to 35%
• AQUA-PLUS Rinsing: intensive rinse
cycle to wash glasses with critical
design with raised fresh-water amount
• HOT & COLD Rinsing: the rinse can
be switched from hot to cold water so
that you get cooler glasses without
any loss of time
• Hygiene Programme: for removal of
calcium carbonate and other deposits
from wash chamber
GC - PROFI COMPACT GLASSWASHER
TECHNICAL DATA
DIMENSIONAL DRAWING
460
700* 3
15
285*
590
940
+ 40 mm
CONNECTIONS
*Thermostop guarantees required temperatures with cold water and / or 230 V connection, the actual cycle times extend
accordingly.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water
softener or an external water softener of the product line HYDROLINE PROTECT.
1.1 - 3EFFECTIVE: 01. January 2015
BASIC MODEL
• Front door glasswasher
• Nominal capacity up to 48 racks/h or 770 glasses/h
• 5 automatic cycles: short, standard, intensive rinse, cold
water rinse, hygiene
• Shock absorved door with closing mechanism
• Multi-setting: easy switchable from 400 V to 230 V on site
• Ready to install - completely equipped: fill / drain hose,
power cord (400 V connection), detergent dispenser,
rinse aid dispenser, rinse pump, drain pump, back-flow
preventer
• Tank, frame, rinse arm and panels are stainless steel
1.4301
• 1 glass rack 371450-84
ORDER NO. DESCRIPTION €
GC-10A Basic model with cold water rinse 4.130,-
GCS-20A with integrated water softener, no cold rinse, pre-configurated for 230/50/1 with
13A
5.455,-
RO-I 400 Reverse osmosis (drawer module) for GC / GCP, integrated in 120 mm high base 2.155,-
01-294220-001 Non-return valve kit class BA for RO systems
for fresh-water and drain connection according DIN EN 1717
including dirt collector and hoses
475,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
01-294373-001 Retrofit kit for integrated chemical containers 190,-
01-294098-1 Cabinet base 100 mm, stainless steel 350,-
01-240349-004 Cabinet base 435 mm high, with removable door, stainless steel, providing space for
2 empty racks or chemicals
720,-
01-240349-002 Cabinet base for use in combination with RO-I 400: 435 mm high, with removable
door, stainless steel, providing space for 2 empty racks or chemicals
990,-
01-294450-001 Glass rack ACTIVE Drying 400 x 400 mm
for PREMAX GCP, with 4 sloped rows
with glass positioning element for optimised drying results
195,-
371450-83 Universal flat rack 400 x 400 mm, without sloped rows, plastic coated, height 115
mm
60,-
371450-84 Universal glass rack 400 x 400 mm, with 4 sloped rows à 90 mm, height 175 mm 90,-
897951 Bistro universal rack 400 x 400 mm, half side flat for cups, half side for 13 small
coffee plates, height 115 mm
105,-
GC - PROFI COMPACT GLASSWASHER
For best wash results, we recommend the HOBART chemical range HYLINE and the HOBART water
treatment systems HYDROLINE.
1.1 - 4 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• Compact glasswasher, ideal for
narrow places in restaurants, bars,
pubs, bistros, etc. Ideal for use
with integrable reverse osmosis
system HYDROLINE PURE RO-I for
undercounter installation. Total height
incl. RO-I 400: 820 mm
• ACTIVE Drying: dry, warm air
combined with an innovative airflow
system remove the moisture from
the glasses and channels it out of the
wash chamber. The glasses no longer
need to be dried by hand
• VISIOTRONIC Control: ensures a
simple and intuitive operating with
a single button. When the display is
activated by a proximity sensor, all
the necessary information appears in
the large display, in clear text or in the
form of symbols
• VAPOSTOP Door System: prevents
vapour to escape from machine when
door is opened
• Rinsing 1.9 l: water consumption
per cycle of only 1.9 l which results in
a reduction of water, chemicals and
energy consumption of 35 %
• CLIP-IN Wash and Rinse Arms:
both the wash and rinse arms can be
lifted out of the wash chamber and
replaced with one hand and without
any tools
• Intelligent data documentation:
automatic recording of important
operational data and consumptions
and indication on the display
• USB-interface: comfortable
download of operational data in form
of a protocol via USB
• Filter position sensor: prevents
operation without tank strainer
• GENIUS-X² Fine Filter System:
advanced filter system with pre-
wash function reduces detergent
consumption up to 35%
• AQUA-PLUS Rinsing: intensive rinse
cycle to wash glasses with critical
design with raised fresh-water amount
• HOT & COLD Rinsing: the rinse can
be switched from hot to cold water so
that you get cooler glasses without
any loss of time
• Hygiene Programme: for removal of
calcium carbonate and other deposits
from wash chamber
GCP - PREMAX COMPACT GLASSWASHER
TECHNICAL DATA
DIMENSIONAL DRAWING
460
700* 3
15
285*
590
940
+ 40 mm
CONNECTIONS
*Thermostop guarantees required temperatures with cold water and / or 230 V connection, the actual cycle times extend
accordingly.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water
softener or an external water softener of the product line HYDROLINE PROTECT.
1.1 - 5EFFECTIVE: 01. January 2015
BASIC MODEL
• Front door glasswasher with ACTIVE Drying
• Nominal capacity up to 48 racks/h or 770 glasses/h
• 5 automatic cycles: short, standard, intensive rinse, cold
water rinse, hygiene
• Shock absorved door with closing mechanism
• Multi-setting: easy switchable from 400 V to 230 V on site
• Ready to install - completely equipped: fill / drain hose,
power cord (400 V connection), detergent dispenser,
rinse aid dispenser, rinse pump, drain pump, back-flow
preventer
• Tank, frame, rinse arm and panels are stainless steel
1.4301
• 1 glass rack ACTIVE Drying
ORDER NO. DESCRIPTION €
GCP-10A Basic model with cold water rinse 5.445,-
RO-I 400 Reverse osmosis (drawer module) for GC / GCP, integrated in 120 mm high base 2.155,-
01-294220-001 Non-return valve kit class BA for RO systems
for fresh-water and drain connection according DIN EN 1717
including dirt collector and hoses
475,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
01-294373-001 Retrofit kit for integrated chemical containers 190,-
01-294098-1 Cabinet base 100 mm, stainless steel 350,-
01-240349-002 Cabinet base for use in combination with RO-I 400: 435 mm high, with removable
door, stainless steel, providing space for 2 empty racks or chemicals
990,-
01-240349-004 Cabinet base 435 mm high, with removable door, stainless steel, providing space for
2 empty racks or chemicals
720,-
01-294450-001 Glass rack ACTIVE Drying 400 x 400 mm
for PREMAX GCP, with 4 sloped rows
with glass positioning element for optimised drying results
195,-
371450-83 Universal flat rack 400 x 400 mm, without sloped rows, plastic coated, height 115
mm
60,-
371450-84 Universal glass rack 400 x 400 mm, with 4 sloped rows à 90 mm, height 175 mm 90,-
897951 Bistro universal rack 400 x 400 mm, half side flat for cups, half side for 13 small
coffee plates, height 115 mm
105,-
GCP - PREMAX COMPACT GLASSWASHER
For best wash results, we recommend the HOBART chemical range HYLINE and the HOBART water
treatment systems HYDROLINE.
1.1 - 6 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• VISIOTRONIC Control: ensures a
simple and intuitive operating with
a single button. When the display is
activated by a proximity sensor, all
the necessary information appears in
the large display, in clear text or in the
form of symbols
• SENSO-ACTIVE Resource
Management: constantly measures
the quality of the wash water and
keeps the amount of rinsing needed
in each rinse cycle to the minimum
in order to guarantee a fully hygienic
wash result. This reduces the amount
of fresh water used per rinse cycle up
to 2.0 l
• Double rack system: two racks can
be washed in a single wash cycle.
One rack of cups can be washed
underneath, while a second rack
containing dishes and cutlery can
also be washed above it. Thanks to
the optimum use of the entire wash
chamber the performance of the
machine can be doubled
• CLIP-IN Wash and Rinse Arms:
both the wash and rinse arms can be
lifted out of the wash chamber and
replaced with one hand and without
any tools
• Intelligent data documentation:
automatic recording of important
operational data and consumptions
and indication on the display
• USB-interface: comfortable
download of operational data in form
of a protocol via USB
• Fill level indicator: monitors
contents of external as well as
integrated chemical containers
• Filter position sensor: prevents
operation without tank strainer
• GENIUS-X² Fine Filter System:
advanced filter system with pre-
wash function reduces detergent
consumption up to 35%
• AQUA-PLUS Rinsing: intensive rinse
cycle to wash glasses with critical
design with raised fresh-water amount
• HOT & COLD Rinsing: the rinse can
be switched from hot to cold water so
that you get cooler glasses without
any loss of time
• Hygiene Programme: for removal of
calcium carbonate and other deposits
from wash chamber
GX - PROFI GLASSWASHER
TECHNICAL DATA
DIMENSIONAL DRAWING
600
820* 42
529
9*
6001046
= + 40 mm 5
CONNECTIONS
*Thermostop guarantees required temperatures with cold water and / or 230 V connection, the actual cycle times extend
accordingly.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water
softener or an external water softener of the product line HYDROLINE PROTECT.
1.1 - 7EFFECTIVE: 01. January 2015
BASIC MODEL
• Front door glasswasher with optional double rack system
• Nominal capacity up to 60 racks/h or 2.160 glasses/h
• Nominal capacity with double rack: up to 120 racks/h
• 6 automatic cycles: short, standard, intensive rinse, cold
water rinse, GLASS-SHINE Basic Cleaning, hygiene
• Shock absorved door with closing mechanism
• Multi-setting: easy switchable from 400 V to 230 V on site
• Ready to install - completely equipped: fill / drain hose,
power cord (400 V connection), detergent dispenser,
rinse aid dispenser, rinse pump, drain pump, back-flow
preventer
• Tank, frame, rinse arm and panels are stainless steel
1.4301
• 1 glass rack 303171
ORDER NO. DESCRIPTION €
GX-10A Basic model with cold water rinse 5.065,-
GX-11A without cold water rinse 4.715,-
GXS-11A with integrated water softener, without cold rinse 5.315,-
RO-I V Reverse osmosis - free standing vertical version 2.155,-
01-294220-001 Non-return valve kit class BA for RO systems
for fresh-water and drain connection according DIN EN 1717
including dirt collector and hoses
475,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
01-515190-001 Retrofit kit for integrated chemical containers 285,-
01-240349-001 Cabinet base: 435 mm high, with removable door, stainless steel, providing space for
2 empty racks or chemicals
720,-
01-240349-003 Cabinet base for use in combination with RO-I 500: 435 mm high, with removable
door, stainless steel, providing space for 2 empty racks or chemicals
990,-
01-240381-1 Shelf for cabinet base 435 mm 70,-
303171 Universal glass rack 500 x 470 mm, high version, with 4 sloped rows à 95 mm,
height 180 mm, plastic coated (suitable for front door dishwashers)
75,-
378814 Universal glass rack 500 x 500 mm
high version with 5 sloped rows à 98 mm, plastic coated, height 180 mm
95,-
897919 Connecting cable (2.200 mm) and plug for 230/50/1 30,-
GX - PROFI GLASSWASHER
For best wash results, we recommend the HOBART chemical range HYLINE and the HOBART water
treatment systems HYDROLINE.
1.1 - 8 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• Compact dishwasher, ideal for
use with integrable reverse osmosis
system HYDROLINE PURE RO-I for
undercounter installation. Total height
incl. RO-I 500: 820 mm
• VISIOTRONIC Control: ensures a
simple and intuitive operating with
a single button. When the display is
activated by a proximity sensor, all
the necessary information appears in
the large display, in clear text or in the
form of symbols
• SENSO-ACTIVE Resource
Management: constantly measures
the quality of the wash water and
keeps the amount of rinsing needed
in each rinse cycle to the minimum
in order to guarantee a fully hygienic
wash result. This reduces the amount
of fresh water used per rinse cycle up
to 2.0 l
• CLIP-IN Wash and Rinse Arms:
both the wash and rinse arms can be
lifted out of the wash chamber and
replaced with one hand and without
any tools
• Intelligent data documentation:
automatic recording of important
operational data and consumptions
and indication on the display
• USB-interface: comfortable
download of operational data in form
of a protocol via USB
• Fill level indicator: monitors
contents of external as well as
integrated chemical containers
• Filter position sensor: prevents
operation without tank strainer
• GENIUS-X² Fine Filter System:
advanced filter system with pre-
wash function reduces detergent
consumption up to 35%
• AQUA-PLUS Rinsing: intensive rinse
cycle to wash glasses with critical
design with raised fresh-water amount
• Hygiene Programme: for removal of
calcium carbonate and other deposits
from wash chamber
GXC - PROFI GLASSWASHER
TECHNICAL DATA
DIMENSIONAL DRAWING
= + 40 mm
700*
600
305
299*
600922
CONNECTIONS
*Thermostop guarantees required temperatures with cold water and / or 230 V connection, the actual cycle times extend
accordingly.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water
softener or an external water softener of the product line HYDROLINE PROTECT.
1.1 - 9EFFECTIVE: 01. January 2015
BASIC MODEL
• Compact low body front door glasswasher
• Nominal capacity up to 60 racks/h or 2.160 glasses/h
• 5 automatic cycles: short, standard, intensive rinse,
GLASS-SHINE Basic Cleaning, hygiene
• Shock absorved door with closing mechanism
• Multi-setting: easy switchable from 400 V to 230 V on site
• Ready to install - completely equipped: fill / drain hose,
power cord (400 V connection), detergent dispenser,
rinse aid dispenser, rinse pump, drain pump, back-flow
preventer
• Tank, frame, rinse arm and panels are stainless steel
1.4301
• 1 glass rack 378814
ORDER NO. DESCRIPTION €
GXC-11A Basic model 4.715,-
GXCS-11A with integrated water softener 5.315,-
RO-I 500 Reverse osmosis (drawer module) for GX / GP / FX / FP
integrated in 120 mm high base
2.155,-
01-294220-001 Non-return valve kit class BA for RO systems
for fresh-water and drain connection according DIN EN 1717
including dirt collector and hoses
475,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
01-515190-001 Retrofit kit for integrated chemical containers 285,-
01-240349-001 Cabinet base: 435 mm high, with removable door, stainless steel, providing space for
2 empty racks or chemicals
720,-
01-240349-003 Cabinet base for use in combination with RO-I 500: 435 mm high, with removable
door, stainless steel, providing space for 2 empty racks or chemicals
990,-
01-240381-1 Shelf for cabinet base 435 mm 70,-
303171 Universal glass rack 500 x 470 mm, high version, with 4 sloped rows à 95 mm,
height 180 mm, plastic coated (suitable for front door dishwashers)
75,-
378814 Universal glass rack 500 x 500 mm
high version with 5 sloped rows à 98 mm, plastic coated, height 180 mm
95,-
897919 Connecting cable (2.200 mm) and plug for 230/50/1 30,-
GXC - PROFI GLASSWASHER
For best wash results, we recommend the HOBART chemical range HYLINE and the HOBART water
treatment systems HYDROLINE.
1.1 - 10 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• VISIOTRONIC Control: ensures a
simple and intuitive operating with
a single button. When the display is
activated by a proximity sensor, all
the necessary information appears in
the large display, in clear text or in the
form of symbols
• VAPOSTOP Door System: prevents
vapour to escape from machine when
door is opened
• PERFECT Drying Manager:
assistance for better drying results
• SENSO-ACTIVE Resource
Management: constantly measures
the quality of the wash water and
keeps the amount of rinsing needed
in each rinse cycle to the minimum
in order to guarantee a fully hygienic
wash result. This reduces the amount
of fresh water used per rinse cycle up
to 2.0 l
• Double rack system: two racks can
be washed in a single wash cycle.
One rack of cups can be washed
underneath, while a second rack
containing dishes and cutlery can
also be washed above it. Thanks to
the optimum use of the entire wash
chamber the performance of the
machine can be doubled
• CLIP-IN Wash and Rinse Arms:
both the wash and rinse arms can be
lifted out of the wash chamber and
replaced with one hand and without
any tools
• Intelligent data documentation:
automatic recording of important
operational data and consumptions
and indication on the display
• USB-interface: comfortable
download of operational data in form
of a protocol via USB
• Fill level indicator: monitors
contents of external as well as
integrated chemical containers
• Filter position sensor: prevents
operation without tank strainer
• GENIUS-X² Fine Filter System:
advanced filter system with pre-
wash function reduces detergent
consumption up to 35%
• AQUA-PLUS Rinsing: intensive rinse
cycle to wash glasses with critical
design with raised fresh-water amount
• HOT & COLD Rinsing: the rinse can
be switched from hot to cold water so
that you get cooler glasses without
any loss of time
• Hygiene Programme: for removal of
calcium carbonate and other deposits
from wash chamber
GP - PREMAX GLASSWASHER
TECHNICAL DATA
DIMENSIONAL DRAWING
600
820* 42
529
9*
6001046
= + 40 mm 5
CONNECTIONS
*Thermostop guarantees required temperatures with cold water and / or 230 V connection, the actual cycle times extend
accordingly.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water
softener or an external water softener of the product line HYDROLINE PROTECT.
1.1 - 11EFFECTIVE: 01. January 2015
BASIC MODEL
• Front door glasswasher with optional double rack system
• Nominal capacity up to 60 racks/h or 2.160 glasses/h
• Nominal capacity with double rack: up to 120 racks/h
• 7 automatic cycles: short, standard, intensive rinse, cold
water rinse, cutlery, GLASS-SHINE Basic Cleaning, hygiene
• Shock absorved door with closing mechanism
• Multi-setting: easy switchable from 400 V to 230 V on site
• Ready to install - completely equipped: fill / drain hose,
power cord (400 V connection), detergent dispenser,
rinse aid dispenser, rinse pump, drain pump, back-flow
preventer
• Tank, frame, rinse arm and panels are stainless steel
1.4301
• 1 glass rack 303171
ORDER NO. DESCRIPTION €
GP-10A Basic model 5.750,-
GPS-10A with integrated water softener 6.350,-
RO-I V Reverse osmosis - free standing vertical version 2.155,-
01-294220-001 Non-return valve kit class BA for RO systems
for fresh-water and drain connection according DIN EN 1717
including dirt collector and hoses
475,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
01-515190-001 Retrofit kit for integrated chemical containers 285,-
01-240349-001 Cabinet base: 435 mm high, with removable door, stainless steel, providing space for
2 empty racks or chemicals
720,-
01-240349-003 Cabinet base for use in combination with RO-I 500: 435 mm high, with removable
door, stainless steel, providing space for 2 empty racks or chemicals
990,-
01-240381-1 Shelf for cabinet base 435 mm 70,-
303171 Universal glass rack 500 x 470 mm, high version, with 4 sloped rows à 95 mm,
height 180 mm, plastic coated (suitable for front door dishwashers)
75,-
378814 Universal glass rack 500 x 500 mm
high version with 5 sloped rows à 98 mm, plastic coated, height 180 mm
95,-
897919 Connecting cable (2.200 mm) and plug for 230/50/1 30,-
GP - PREMAX GLASSWASHER
For best wash results, we recommend the HOBART chemical range HYLINE and the HOBART water
treatment systems HYDROLINE.
1.1 - 12 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• VISIOTRONIC Control: ensures a
simple and intuitive operating with
a single button. When the display is
activated by a proximity sensor, all
the necessary information appears in
the large display, in clear text or in the
form of symbols
• SENSO-ACTIVE Resource
Management: constantly measures
the quality of the wash water and
keeps the amount of rinsing needed
in each rinse cycle to the minimum
in order to guarantee a fully hygienic
wash result. This reduces the amount
of fresh water used per rinse cycle up
to 2.0 l
• Double rack system: two racks can
be washed in a single wash cycle.
One rack of cups can be washed
underneath, while a second rack
containing dishes and cutlery can
also be washed above it. Thanks to
the optimum use of the entire wash
chamber the performance of the
machine can be doubled
• CLIP-IN Wash and Rinse Arms:
both the wash and rinse arms can be
lifted out of the wash chamber and
replaced with one hand and without
any tools
• Intelligent data documentation:
automatic recording of important
operational data and consumptions
and indication on the display
• USB-interface: comfortable
download of operational data in form
of a protocol via USB
• Fill level indicator: monitors
contents of external as well as
integrated chemical containers
• Filter position sensor: prevents
operation without tank strainer
• GENIUS-X² Fine Filter System:
advanced filter system with pre-
wash function reduces detergent
consumption up to 35%
• Hygiene Programme: for removal of
calcium carbonate and other deposits
from wash chamber
FX - PROFI DISHWASHER
TECHNICAL DATA
DIMENSIONAL DRAWING
600
820* 42
529
9*
6001046
= + 40 mm 5
CONNECTIONS
*Thermostop guarantees required temperatures with cold water and / or 230 V connection, the actual cycle times extend
accordingly.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water
softener or an external water softener of the product line HYDROLINE PROTECT.
1.1 - 13EFFECTIVE: 01. January 2015
BASIC MODEL
• Front door glass and dishwasher with optional double rack
system
• Nominal capacity up to 40 racks/h or 720 plates/h or
1.440 glasses/h
• Nominal capacity with double rack: up to 80 racks/h (40
plate racks + 40 glass/cup racks)
• 6 automatic cycles: short, standard, water X-change,
STARCH-REMOVAL, permanent, hygiene
• Shock absorved door with closing mechanism
• Multi-setting: easy switchable from 400 V to 230 V on site
• Ready to install - completely equipped: fill / drain hose,
power cord (400 V connection), detergent dispenser,
rinse aid dispenser, rinse pump, drain pump, back-flow
preventer
• Tank, frame, rinse arm and panels are stainless steel
1.4301
• 1 plate rack P-18-12
• 1 universal rack B-00-07
• 1 cutlery rack with 4 boxes 01-246175-1
ORDER NO. DESCRIPTION €
FX-10A Basic model 5.100,-
FXS-10A with integrated water softener 5.700,-
RO-I V Reverse osmosis - free standing vertical version 2.155,-
01-294220-001 Non-return valve kit class BA for RO systems
for fresh-water and drain connection according DIN EN 1717
including dirt collector and hoses
475,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
01-515190-001 Retrofit kit for integrated chemical containers 285,-
01-515339-001 Insert for double racking 75,-
01-240349-001 Cabinet base: 435 mm high, with removable door, stainless steel, providing space for
2 empty racks or chemicals
720,-
01-240349-003 Cabinet base for use in combination with RO-I 500: 435 mm high, with removable
door, stainless steel, providing space for 2 empty racks or chemicals
990,-
01-240381-1 Shelf for cabinet base 435 mm 70,-
897919 Connecting cable (2.200 mm) and plug for 230/50/1 30,-
FX - PROFI DISHWASHER
For best wash results, we recommend the HOBART chemical range HYLINE and the HOBART water
treatment systems HYDROLINE.
1.1 - 14 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• Deeper wash chamber: suitable to
wash trays of 600 x 400 mm. Ideal
for fast-food restaurants, cafés and
snack bars
• VISIOTRONIC Control: ensures a
simple and intuitive operating with
a single button. When the display is
activated by a proximity sensor, all
the necessary information appears in
the large display, in clear text or in the
form of symbols
• SENSO-ACTIVE Resource
Management: constantly measures
the quality of the wash water and
keeps the amount of rinsing needed
in each rinse cycle to the minimum
in order to guarantee a fully hygienic
wash result. This reduces the amount
of fresh water used per rinse cycle up
to 2.0 l
• Double rack system: two racks can
be washed in a single wash cycle.
One rack of cups can be washed
underneath, while a second rack
containing dishes and cutlery can
also be washed above it. Thanks to
the optimum use of the entire wash
chamber the performance of the
machine can be doubled
• CLIP-IN Wash and Rinse Arms:
both the wash and rinse arms can be
lifted out of the wash chamber and
replaced with one hand and without
any tools
• Intelligent data documentation:
automatic recording of important
operational data and consumptions
and indication on the display
• USB-interface: comfortable
download of operational data in form
of a protocol via USB
• Fill level indicator: monitors
contents of external as well as
integrated chemical containers
• Filter position sensor: prevents
operation without tank strainer
• GENIUS-X² Fine Filter System:
advanced filter system with pre-
wash function reduces detergent
consumption up to 35%
• Hygiene Programme: for removal of
calcium carbonate and other deposits
from wash chamber
FXL - PROFI DISHWASHER
TECHNICAL DATA
DIMENSIONAL DRAWING
5
600
820* 42
529
9*
640401086
= + 40 mm
CONNECTIONS
*Thermostop guarantees required temperatures with cold water and / or 230 V connection, the actual cycle times extend
accordingly.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water
softener or an external water softener of the product line HYDROLINE PROTECT.
1.1 - 15EFFECTIVE: 01. January 2015
BASIC MODEL
• Front door glass and dishwasher with deeper wash
chamber and optional double rack system
• Nominal capacity up to 40 racks/h or 720 plates/h or
1.440 glasses/h
• Nominal capacity with double rack: up to 80 racks/h (40
plate racks + 40 glass/cup racks)
• 6 automatic cycles: short, standard, water X-change,
STARCH-REMOVAL, permanent, hygiene
• Shock absorved door with closing mechanism
• Multi-setting: easy switchable from 400 V to 230 V on site
• Ready to install - completely equipped: fill / drain hose,
power cord (400 V connection), detergent dispenser,
rinse aid dispenser, rinse pump, drain pump, back-flow
preventer
• Tank, frame, rinse arm and panels are stainless steel
1.4301
• 1 plate rack P-18-12
• 1 insert for sheets 324660
• 1 cutlery box CB1
ORDER NO. DESCRIPTION €
FXL-10A Basic model 5.710,-
FXLS-10A with integrated water softener 6.310,-
RO-I V Reverse osmosis - free standing vertical version 2.155,-
01-294220-001 Non-return valve kit class BA for RO systems
for fresh-water and drain connection according DIN EN 1717
including dirt collector and hoses
475,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
01-515190-001 Retrofit kit for integrated chemical containers 285,-
01-515339-001 Insert for double racking 75,-
172831-1 Wire insert 500 x 500 mm for FP/FX/FXL and AMX/AMXX/AUP, stainless steel, for
pots etc.
120,-
01-240349-001 Cabinet base: 435 mm high, with removable door, stainless steel, providing space for
2 empty racks or chemicals
720,-
01-240349-003 Cabinet base for use in combination with RO-I 500: 435 mm high, with removable
door, stainless steel, providing space for 2 empty racks or chemicals
990,-
01-240381-1 Shelf for cabinet base 435 mm 70,-
897919 Connecting cable (2.200 mm) and plug for 230/50/1 30,-
FXL - PROFI DISHWASHER
For best wash results, we recommend the HOBART chemical range HYLINE and the HOBART water
treatment systems HYDROLINE.
1.1 - 16 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• ECO Vapo Rinse: switchable steam
rinse cycle reduces fresh-water
consumption to 1.0 l. Saving of up to
60 % water and detergent as well as
up to 60 % rinse aid
• VISIOTRONIC Control: ensures a
simple and intuitive operating with
a single button. When the display is
activated by a proximity sensor, all
the necessary information appears in
the large display, in clear text or in the
form of symbols
• VAPOSTOP Door System: prevents
vapour to escape from machine when
door is opened
• PERFECT Drying Manager:
assistance for better drying results
• Double rack system: two racks can
be washed in a single wash cycle.
One rack of cups can be washed
underneath, while a second rack
containing dishes and cutlery can
also be washed above it. Thanks to
the optimum use of the entire wash
chamber the performance of the
machine can be doubled
• CLIP-IN Wash and Rinse Arms:
both the wash and rinse arms can be
lifted out of the wash chamber and
replaced with one hand and without
any tools
• Intelligent data documentation:
automatic recording of important
operational data and consumptions
and indication on the display
• USB-interface: comfortable
download of operational data in form
of a protocol via USB
• Fill level indicator: monitors
contents of external as well as
integrated chemical containers
• Filter position sensor: prevents
operation without tank strainer
• GENIUS-X² Fine Filter System:
advanced filter system with pre-
wash function reduces detergent
consumption up to 35%
• SENSO-ACTIVE Resource
Management: constantly measures
the quality of the wash water and
keeps the amount of rinsing needed
in each rinse cycle to the minimum
in order to guarantee a fully hygienic
wash result. This reduces the amount
of fresh water used per rinse cycle up
to 1.0 l
• Hygiene Programme: for removal of
calcium carbonate and other deposits
from wash chamber
FP - PREMAX DISHWASHER
TECHNICAL DATA
DIMENSIONAL DRAWING
600
820* 42
529
9*
6001046
= + 40 mm 5
CONNECTIONS
*Thermostop guarantees required temperatures with cold water and / or 230 V connection, the actual cycle times extend
accordingly.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water
softener or an external water softener of the product line HYDROLINE PROTECT.
1.1 - 17EFFECTIVE: 01. January 2015
BASIC MODEL
• Front door glass and dishwasher with optional double rack
system
• Nominal capacity up to 45 racks/h or 810 plates/h or
1.620 glasses/h
• Nominal capacity with double rack: up to 90 racks/h (45
plate racks + 45 glass/cup racks)
• 8 automatic cycles: short, standard, eco (steam rinse),
cutlery, water X-change, STARCH-REMOVAL, permanent,
hygiene
• Shock absorved door with closing mechanism
• Multi-setting: easy switchable from 400 V to 230 V on site
• Ready to install - completely equipped: fill / drain hose,
power cord (400 V connection), detergent dispenser,
rinse aid dispenser, rinse pump, drain pump, back-flow
preventer
• Tank, frame, rinse arm and panels are stainless steel
1.4301
• 1 plate rack P-18-12
• 1 universal rack B-00-07
• 1 cutlery rack with 4 boxes 01-246175-1
ORDER NO. DESCRIPTION €
FP-10A Basic model 6.360,-
FPS-10A with integrated water softener 6.960,-
RO-I V Reverse osmosis - free standing vertical version 2.155,-
01-294220-001 Non-return valve kit class BA for RO systems
for fresh-water and drain connection according DIN EN 1717
including dirt collector and hoses
475,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
01-515190-001 Retrofit kit for integrated chemical containers 285,-
01-515339-001 Insert for double racking 75,-
01-240349-001 Cabinet base: 435 mm high, with removable door, stainless steel, providing space for
2 empty racks or chemicals
720,-
01-240349-003 Cabinet base for use in combination with RO-I 500: 435 mm high, with removable
door, stainless steel, providing space for 2 empty racks or chemicals
990,-
01-240381-1 Shelf for cabinet base 435 mm 70,-
897919 Connecting cable (2.200 mm) and plug for 230/50/1 30,-
FP - PREMAX DISHWASHER
For best wash results, we recommend the HOBART chemical range HYLINE and the HOBART water
treatment systems HYDROLINE.
1.1 - 18 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• VISIOTRONIC Control: ensures a
simple and intuitive operating with
a single button. When the display is
activated by a proximity sensor, all
the necessary information appears in
the large display, in clear text or in the
form of symbols
• Exhaust energy storage: the fully
enclosed 4-sided hood keeps steam
and energy inside the system: energy
saving up to 3 kW/h, less humidity in
the kitchen area and better hygienic
conditions
• CLIP-IN Wash and Rinse Arms:
both the wash and rinse arms can be
lifted out of the wash chamber and
replaced with one hand and without
any tools
• EASY-CLEAN Concept: blue
markings in the machine help the
operator to identify the components
which require cleaning
AM900 - PROFI GLASS AND DISHWASHER
TECHNICAL DATA
DIMENSIONAL DRAWING
711
440
860*
1510
*19
95*
200*/** 635107
635
815
107
* 25 mm adjustable feet+
−
CONNECTIONS
*Thermostop guarantees required temperatures with cold water, the actual cycle times extend accordingly.
For corner operation we recommend to make the right side of the machine accessible for service.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water
softener or a HOBART HYDROLINE water treatment system.
1.1 - 19EFFECTIVE: 01. January 2015
BASIC MODEL
• Hood-type dishwasher for straight through or corner
operation
• Nominal capacity up to 60 racks/h or 1,080 plates/h or
2,160 glasses/h
• 3 automatic cycles: short, standard, intensive
• USB-interface for comfortable download of operational
data
• Ready to install - completely equipped: fill / drain hose,
electrical cable, detergent dispenser, rinse aid dispenser,
rinse pump, drain pump, back-flow preventer
• 1 plate rack P-18-12
• 1 universal flat rack B-00-07
• 1 plastic cutlery rack CB8
ORDER NO. DESCRIPTION €
AM900-10A Basic model 6.570,-
AM900S-10A with integrated water softener 7.185,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
01-515960-001 Back panel (if unit is not installed against wall.
All units have closing frame to wall at rear)
385,-
ML71726 Corner splash panel for open distance to the wall in case of corner installation 95,-
AM900 - PROFI GLASS AND DISHWASHER
For best wash results, we recommend the HOBART chemical range HYLINE and the HOBART water
treatment systems HYDROLINE.
1.1 - 20 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• VISIOTRONIC Control: ensures a
simple and intuitive operating with
a single button. When the display is
activated by a proximity sensor, all
the necessary information appears in
the large display, in clear text or in the
form of symbols
• Exhaust energy storage: the fully
enclosed 4-sided hood keeps steam
and energy inside the system: energy
saving up to 3 kW/h, less humidity in
the kitchen area and better hygienic
conditions
• SENSO-ACTIVE Resource
Management: constantly measures
the quality of the wash water and
keeps the amount of rinsing needed
in each rinse cycle to the minimum
in order to guarantee a fully hygienic
wash result. This reduces the amount
of fresh water used per rinse cycle up
to 2.0 l
• CLIP-IN Wash and Rinse Arms:
both the wash and rinse arms can be
lifted out of the wash chamber and
replaced with one hand and without
any tools
• Filter position sensor: prevents
operation without tank strainer
• GENIUS-X² Fine Filter System:
advanced filter system with pre-
wash function reduces detergent
consumption up to 35%
• EASY-CLEAN Concept: blue
markings in the machine help the
operator to identify the components
which require cleaning
AMX - PROFI GLASS AND DISHWASHER
TECHNICAL DATA
DIMENSIONAL DRAWING
711
440
860*
1510
*19
95*
200*/** 635107
635
815
107
* 25 mm adjustable feet** 110 mm with heat recovery
+
−
CONNECTIONS
*Thermostop guarantees required temperatures with cold water, the actual cycle times extend accordingly.
For corner operation we recommend to make the right side of the machine accessible for service.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water
softener or a HOBART HYDROLINE water treatment system.
1.1 - 21EFFECTIVE: 01. January 2015
BASIC MODEL
• Hood-type dishwasher for straight through or corner
operation
• Nominal capacity up to 60 racks/h or 1,080 plates/h or
2,160 glasses/h
• 6 automatic cycles: short, standard, intensive, starch-
removal, permanent, hygiene
• Heat and noise insulated hood
• Strainer soil sensor
• Refill signal (detergent / rinse aid)
• Self-cleaning programme
• USB-interface for comfortable download of operational
data
• Ready to install - completely equipped: fill / drain hose,
electrical cable, detergent dispenser, rinse aid dispenser,
rinse pump, drain pump, back-flow preventer
• Tank, frame, wash / rinse arms and panels are stainless
steel 1.4301
• 1 plate rack P-18-12
• 1 universal flat rack B-00-07
• 1 plastic cutlery rack CB8
ORDER NO. DESCRIPTION €
AMX-10A Basic model 7.790,-
AMXS-10A with integrated water softener 8.405,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
SEF-14/029 VAPOSTOP Hood System for devices AMX(X/S)-10A prevents vapour escaping
from the machine when the hood is opened
1.660,-
SEF-14/040 Automatic hoodlift closes the hood by pressing the start button and opens
automatically at the end of the cycle
(loading height: 440 mm, back panel is required)
2.020,-
01-515960-001 Back panel (if unit is not installed against wall.
All units have closing frame to wall at rear)
385,-
ML71726 Corner splash panel for open distance to the wall in case of corner installation 95,-
SEF-14/043 Thermolabel temperature setting on request
AMX - PROFI GLASS AND DISHWASHER
For best wash results, we recommend the HOBART chemical range HYLINE and the HOBART water
treatment systems HYDROLINE.
1.1 - 22 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• Drain heat recovery transfers heat
from hot drain water to the fresh-
water supply, reducing boiler power
consumption and saving up to 36% of
costs
• VISIOTRONIC Control: ensures a
simple and intuitive operating with
a single button. When the display is
activated by a proximity sensor, all
the necessary information appears in
the large display, in clear text or in the
form of symbols
• Exhaust energy storage: the fully
enclosed 4-sided hood keeps steam
and energy inside the system: energy
saving up to 3 kW/h, less humidity in
the kitchen area and better hygienic
conditions
• SENSO-ACTIVE Resource
Management: constantly measures
the quality of the wash water and
keeps the amount of rinsing needed
in each rinse cycle to the minimum
in order to guarantee a fully hygienic
wash result. This reduces the amount
of fresh water used per rinse cycle up
to 2.0 l
• CLIP-IN Wash and Rinse Arms:
both the wash and rinse arms can be
lifted out of the wash chamber and
replaced with one hand and without
any tools
• Filter position sensor: prevents
operation without tank strainer
• GENIUS-X² Fine Filter System:
advanced filter system with pre-
wash function reduces detergent
consumption up to 35%
• EASY-CLEAN Concept: blue
markings in the machine help the
operator to identify the components
which require cleaning
AMXR - PROFI GLASS AND DISHWASHER
TECHNICAL DATA
DIMENSIONAL DRAWING
711
440
860*
1510
*19
95*
110* 635107
635
815
107
Drawing includes heat recovery* 25 mm adjustable feet+
−
CONNECTIONS
*Thermostop guarantees required temperatures with cold water, the actual cycle times extend accordingly.
For corner operation we recommend to make the right side of the machine accessible for service.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water
softener or a HOBART HYDROLINE water treatment system.
1.1 - 23EFFECTIVE: 01. January 2015
BASIC MODEL
• Hood-type dishwasher for straight through or corner
operation
• Integrated drain heat recovery
• Nominal capacity up to 60 racks/h or 1,080 plates/h or
2,160 glasses/h
• 6 automatic cycles: short, standard, intensive, starch-
removal, permanent, hygiene
• Heat and noise insulated hood
• Strainer soil sensor
• Refill signal (detergent / rinse aid)
• Self-cleaning programme
• USB-interface for comfortable download of operational
data
• Ready to install - completely equipped: fill / drain hose,
electrical cable, detergent dispenser, rinse aid dispenser,
rinse pump, drain pump, back-flow preventer
• Tank, frame, wash / rinse arms and panels are stainless
steel 1.4301
• 1 plate rack P-18-12
• 1 universal flat rack B-00-07
• 1 plastic cutlery rack CB8
ORDER NO. DESCRIPTION €
AMXR-10A Basic model 9.430,-
AMXRS-10A with integrated water softener 10.045,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
SEF-14/045 VAPOSTOP Hood System for other devices than AMX(X/S)-10A prevents vapour
escaping from the machine when the hood is opened
1.660,-
SEF-14/040 Automatic hoodlift closes the hood by pressing the start button and opens
automatically at the end of the cycle
(loading height: 440 mm, back panel is required)
2.020,-
01-515960-001 Back panel (if unit is not installed against wall.
All units have closing frame to wall at rear)
385,-
ML71726 Corner splash panel for open distance to the wall in case of corner installation 95,-
SEF-14/043 Thermolabel temperature setting on request
AMXR - PROFI GLASS AND DISHWASHER
For best wash results, we recommend the HOBART chemical range HYLINE and the HOBART water
treatment systems HYDROLINE.
1.1 - 24 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• VISIOTRONIC Control: ensures a
simple and intuitive operating with
a single button. When the display is
activated by a proximity sensor, all
the necessary information appears in
the large display, in clear text or in the
form of symbols
• Exhaust energy storage: the fully
enclosed 4-sided hood keeps steam
and energy inside the system: energy
saving up to 3 kW/h, less humidity in
the kitchen area and better hygienic
conditions
• SENSO-ACTIVE Resource
Management: constantly measures
the quality of the wash water and
keeps the amount of rinsing needed
in each rinse cycle to the minimum
in order to guarantee a fully hygienic
wash result. This reduces the amount
of fresh water used per rinse cycle up
to 2.0 l
• CLIP-IN Wash and Rinse Arms:
both the wash and rinse arms can be
lifted out of the wash chamber and
replaced with one hand and without
any tools
• ROTOR-X Wash System: separate
rotating upper & lower 4-spoke wash
arms deliver dynamic wash power
• Filter position sensor: prevents
operation without tank strainer
• GENIUS-X² Fine Filter System:
advanced filter system with pre-
wash function reduces detergent
consumption up to 35%
• Intelligent energy management:
the available energy is used
continuously. Thus, at a low total
loading value the heating time gets
reduced
• EASY-CLEAN Concept: blue
markings in the machine help the
operator to identify the components
which require cleaning
AMXX - PROFI GLASS AND DISHWASHER
TECHNICAL DATA
DIMENSIONAL DRAWING
711
440
860*
1510
*19
95*
200*/** 635107
635
815
107
* 25 mm adjustable feet** 110 mm with heat recovery
+
−
CONNECTIONS
*Thermostop guarantees required temperatures with cold water, the actual cycle times extend accordingly.
For corner operation we recommend to make the right side of the machine accessible for service.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water
softener or a HOBART HYDROLINE water treatment system.
1.1 - 25EFFECTIVE: 01. January 2015
BASIC MODEL
• Hood-type dishwasher for straight through or corner
operation
• Nominal capacity up to 70 racks/h or 1,260 plates/h or
2,520 glasses/h
• 6 automatic cycles: short, standard, intensive, starch-
removal, permanent, hygiene
• Multi-Setting: booster capacity may be reduced from 12.4
kW to 6.2 kW if connected with hot water
• Heat and noise insulated hood
• Strainer soil sensor
• Refill signal (detergent / rinse aid)
• Self-cleaning programme
• USB-interface for comfortable download of operational
data
• Ready to install - completely equipped: fill / drain hose,
electrical cable, detergent dispenser, rinse aid dispenser,
rinse pump, drain pump, back-flow preventer
• Tank, frame, wash / rinse arms and panels are stainless
steel 1,4301
• 2 plate rack P-18-12
• 1 universal flat rack B-00-07
• 1 plastic cutlery rack CB8
ORDER NO. DESCRIPTION €
AMXX-10A Basic model 10.355,-
AMXXS-10A with integrated water softener 10.970,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
SEF-14/029 VAPOSTOP Hood System for devices AMX(X/S)-10A prevents vapour escaping
from the machine when the hood is opened
1.660,-
SEF-14/040 Automatic hoodlift closes the hood by pressing the start button and opens
automatically at the end of the cycle
(loading height: 440 mm, back panel is required)
2.020,-
01-515960-001 Back panel (if unit is not installed against wall.
All units have closing frame to wall at rear)
385,-
ML71726 Corner splash panel for open distance to the wall in case of corner installation 95,-
SEF-14/044 Thermolabel temperature setting on request
AMXX - PROFI GLASS AND DISHWASHER
For best wash results, we recommend the HOBART chemical range HYLINE and the HOBART water
treatment systems HYDROLINE.
1.1 - 26 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• Drain heat recovery transfers heat
from hot drain water to the fresh-
water supply, reducing boiler power
consumption and saving up to 36% of
costs
• VISIOTRONIC Control: ensures a
simple and intuitive operating with
a single button. When the display is
activated by a proximity sensor, all
the necessary information appears in
the large display, in clear text or in the
form of symbols
• Exhaust energy storage: the fully
enclosed 4-sided hood keeps steam
and energy inside the system: energy
saving up to 3 kW/h, less humidity in
the kitchen area and better hygienic
conditions
• SENSO-ACTIVE Resource
Management: constantly measures
the quality of the wash water and
keeps the amount of rinsing needed
in each rinse cycle to the minimum
in order to guarantee a fully hygienic
wash result. This reduces the amount
of fresh water used per rinse cycle up
to 2.0 l
• CLIP-IN Wash and Rinse Arms:
both the wash and rinse arms can be
lifted out of the wash chamber and
replaced with one hand and without
any tools
• ROTOR-X Wash System: separate
rotating upper & lower 4-spoke wash
arms deliver dynamic wash power
• Filter position sensor: prevents
operation without tank strainer
• GENIUS-X² Fine Filter System:
advanced filter system with pre-
wash function reduces detergent
consumption up to 35%
• Intelligent energy management:
the available energy is used
continuously. Thus, at a low total
loading value the heating time gets
reduced
• EASY-CLEAN Concept: blue
markings in the machine help the
operator to identify the components
which require cleaning
AMXXR - PROFI GLASS AND DISHWASHER
TECHNICAL DATA
DIMENSIONAL DRAWING
711
440
860*
1510
*19
95*
110* 635107
635
815
107
Drawing includes heat recovery* 25 mm adjustable feet+
−
CONNECTIONS
*Thermostop guarantees required temperatures with cold water, the actual cycle times extend accordingly.
For corner operation we recommend to make the right side of the machine accessible for service.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water
softener or a HOBART HYDROLINE water treatment system.
1.1 - 27EFFECTIVE: 01. January 2015
BASIC MODEL
• Hood-type dishwasher for straight through or corner
operation
• Integrated drain heat recovery
• Nominal capacity up to 70 racks/h or 1,260 plates/h or
2,520 glasses/h
• 6 automatic cycles: short, standard, intensive, starch-
removal, permanent, hygiene
• Multi-Setting: booster capacity may be reduced from 12.4
kW to 6.2 kW if connected with hot water
• Heat and noise insulated hood
• Strainer soil sensor
• Refill signal (detergent / rinse aid)
• Self-cleaning programme
• USB-interface for comfortable download of operational
data
• Ready to install - completely equipped: fill / drain hose,
electrical cable, detergent dispenser, rinse aid dispenser,
rinse pump, drain pump, back-flow preventer
• Tank, frame, wash / rinse arms and panels are stainless
steel 1.4301
• 2 plate rack P-18-12
• 1 universal flat rack B-00-07
• 1 plastic cutlery rack CB8
ORDER NO. DESCRIPTION €
AMXXR-10A Basic model 11.995,-
AMXXRS-10A with integrated water softener 12.610,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
SEF-14/045 VAPOSTOP Hood System for other devices than AMX(X/S)-10A prevents vapour
escaping from the machine when the hood is opened
1.660,-
SEF-14/040 Automatic hoodlift closes the hood by pressing the start button and opens
automatically at the end of the cycle
(loading height: 440 mm, back panel is required)
2.020,-
01-515960-001 Back panel (if unit is not installed against wall.
All units have closing frame to wall at rear)
385,-
ML71726 Corner splash panel for open distance to the wall in case of corner installation 95,-
SEF-14/044 Thermolabel temperature setting on request
AMXXR - PROFI GLASS AND DISHWASHER
For best wash results, we recommend the HOBART chemical range HYLINE and the HOBART water
treatment systems HYDROLINE.
1.1 - 28 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• VISIOTRONIC Control: ensures a
simple and intuitive operating with
a single button. When the display is
activated by a proximity sensor, all
the necessary information appears in
the large display, in clear text or in the
form of symbols
• XL Wash Chamber: the large hood
and chamber provide best wash
results, e.g. for
– up to 24 plates/rack
– up to 8 sheets 600 x 400 mm
– up to 8 trays 660 x 500 mm
– up to 2 1/1 GN-boxes
• Exhaust energy storage: the fully
enclosed 4-sided hood keeps steam
and energy inside the system: energy
saving up to 3 kW/h, less humidity in
the kitchen area and better hygienic
conditions
• SENSO-ACTIVE Resource
Management: constantly measures
the quality of the wash water and
keeps the amount of rinsing needed
in each rinse cycle to the minimum
in order to guarantee a fully hygienic
wash result. This reduces the amount
of fresh water used per rinse cycle up
to 2.0 l
• CLIP-IN Wash and Rinse Arms:
both the wash and rinse arms can be
lifted out of the wash chamber and
replaced with one hand and without
any tools
• ROTOR-X Wash System: separate
rotating upper & lower 4-spoke wash
arms deliver dynamic wash power
• Filter position sensor: prevents
operation without tank strainer
• GENIUS-X² Fine Filter System:
advanced filter system with pre-
wash function reduces detergent
consumption up to 35%
• Intelligent energy management:
the available energy is used
continuously. Thus, at a low total
loading value the heating time gets
reduced
• EASY-CLEAN Concept: blue
markings in the machine help the
operator to identify the components
which require cleaning
AMXXL - PROFI GLASS AND DISHWASHER, LARGE
TECHNICAL DATA
DIMENSIONAL DRAWING
* 25 mm adjustable feet** 110 mm with heat recovery
+
− For corner installation max. table profile height is 40 mm
811
540
860*
1610
*21
95*
200*/
** 735107
635
815
107
40
CONNECTIONS
*Thermostop guarantees required temperatures with cold water, the actual cycle times extend accordingly.
For corner operation we recommend to make the right side of the machine accessible for service.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water
softener or a HOBART HYDROLINE water treatment system.
1.1 - 29EFFECTIVE: 01. January 2015
BASIC MODEL
• Hood-type dishwasher for straight through or corner
operation
• Nominal capacity up to 70 racks/h or 1,680 plates/h or
2,520 glasses/h, 560 sheets/h, 140 1/1 GN-boxes/h, 70
EN-boxes/h
• Large chamber with 660 x 500 mm usable space
• Extra large loading height of 540 mm
• 6 automatic cycles: short, standard, intensive, starch-
removal, permanent, hygiene
• Multi-Setting: booster capacity may be reduced from 12.4
kW to 6.2 kW if connected with hot water
• Heat and noise insulated hood
• Strainer soil sensor
• Refill signal (detergent / rinse aid)
• Self-cleaning programme
• USB-interface for comfortable download of operational
data
• Ready to install - completely equipped: fill / drain hose,
electrical cable, detergent dispenser, rinse aid dispenser,
rinse pump, drain pump, back-flow preventer
• Tank, frame, wash / rinse arms and panels are stainless
steel 1,4301
• 1 plate rack P-18-12
• 1 tray rack T-06-09
• 1 cutlery rack C-01-07
ORDER NO. DESCRIPTION €
AMXXL-10A Basic model 11.480,-
AMXXLS-10A with integrated water softener 12.095,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
SEF-14/046 VAPOSTOP Hood System for devices AMXXL(S)-10A prevents vapour escaping
from the machine when the hood is opened
1.660,-
SEF-14/051 Automatic hoodlift closes the hood by pressing the start button and opens
automatically at the end of the cycle
(loading height: 440 mm, back panel is required)
2.020,-
SEF-14/055 Drain heat recovery for AMXXL-10A on request
SEF-14/057 Drain heat recovery for AMXXLS-10A on request
01-539553-001 Back panel (if unit is not installed against wall, all units have closing frame to wall at
rear)
485,-
ML71726 Corner splash panel for open distance to the wall in case of corner installation 95,-
T-XL Tray rack 600 x 500 mm
for 10 GN-trays or 12 trays up to 470 mm length, height 11 cm
105,-
P-XL Plate rack 600 x 500 mm
for 24 plates up to 240 mm Ø or 22 large plates (285 mm Ø)
height 11 cm
105,-
B-XL Universal flat rack 600 x 500 mm
with wide mesh bottom
(for example for cutlery baskets for cutlery in upright position)
height 11 cm
105,-
SEF-14/063 Thermolabel temperature setting on request
AMXXL - PROFI GLASS AND DISHWASHER, LARGE
For best wash results, we recommend the HOBART chemical range HYLINE and the HOBART water
treatment systems HYDROLINE.
1.1 - 30 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• Double capacity: the double wide
wash chamber can cover 2 racks or
bigger containers
• VISIOTRONIC Control: ensures a
simple and intuitive operating with
a single button. When the display is
activated by a proximity sensor, all
the necessary information appears in
the large display, in clear text or in the
form of symbols
• Exhaust energy storage: the fully
enclosed 4-sided hood keeps steam
and energy inside the system: energy
saving up to 6 kW/h; less humidity in
the kitchen area and better hygienic
conditions
• SENSO-ACTIVE Resource
Management: constantly measures
the quality of the wash water and
keeps the amount of rinsing needed
in each rinse cycle to the minimum
in order to guarantee a fully hygienic
wash result. This reduces the amount
of fresh water used per rinse cycle up
to 2.0 l
• CLIP-IN Wash and Rinse Arms:
both the wash and rinse arms can be
lifted out of the wash chamber and
replaced with one hand and without
any tools
• Filter position sensor: prevents
operation without tank strainer
• GENIUS-X² Fine Filter System:
advanced filter system with pre-
wash function reduces detergent
consumption up to 35%
• Intelligent energy management:
the available energy is used
continuously. Thus, at a low total
loading value the heating time gets
reduced
• EASY-CLEAN Concept: blue
markings in the machine help the
operator to identify the components
which require cleaning
AMXT - PROFI GLASS AND DISHWASHER, DOUBLE RACK
TECHNICAL DATA
DIMENSIONAL DRAWING
440
860*
1510
*19
95*
110** 1345
1269
635
815
107
1345
Drawing includes heat recovery* 25 mm adjustable feet** 110 mm with heat recovery
+
−
CONNECTIONS
*Thermostop guarantees required temperatures with cold water, the actual cycle times extend accordingly.
For corner operation we recommend to make the right side of the machine accessible for service.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water
softener or a HOBART HYDROLINE water treatment system.
1.1 - 31EFFECTIVE: 01. January 2015
BASIC MODEL
• Double rack hood-type dishwasher for straight through or
corner operation
• Nominal capacity up to 120 racks/h or 2,160 plates/h or
4,320 glasses/h
• 6 automatic cycles: short, standard, intensive, starch-
removal, permanent, hygiene
• Multi-Setting: booster capacity may be reduced from 12.4
kW to 6.2 kW if connected with hot water
• Heat and noise insulated hood
• Strainer soil sensor
• Refill signal (detergent / rinse aid)
• Self-cleaning programme
• USB-interface for comfortable download of operational
data
• Ready to install - completely equipped: fill / drain hose,
electrical cable, detergent dispenser, rinse aid dispenser,
rinse pump, drain pump, back-flow preventer
• Tank, frame, wash / rinse arms and panels are stainless
steel 1.4301
• 4 plate racks P-18-12
• 1 cutlery rack C-01-07
ORDER NO. DESCRIPTION €
AMXT-10A Basic model 15.580,-
SD-H High performance double cartridge softener 1.840,-
IS1 Hose, 1,500 mm, 3/4", DN15, reinforced with stainless steel for basic installation 70,-
IS4 Non-return valve for fresh-water connection class HD according DIN EN 1717 85,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
SEF-14/052 VAPOSTOP Hood System prevents vapour escaping from the machine when the
hood is opened
3.320,-
SEF-14/042 Automatic hoodlift closes the hood by pressing the start button and opens
automatically at the end of the cycle
(loading height: 440 mm, back panel is required)
2.020,-
SEF-14/050 Separate tank fill 3.590,-
SEF-14/054 Drain heat recovery for AMXT on request
01-515991-001 Back panel
(if unit is not installed against wall, all units have closing frame to wall at rear)
795,-
ML71726 Corner splash panel for open distance to the wall in case of corner installation 95,-
SEF-14/064 Thermolabel temperature setting on request
AMXT - PROFI GLASS AND DISHWASHER, DOUBLE RACK
For best wash results, we recommend the HOBART chemical range HYLINE and the HOBART water
treatment systems HYDROLINE.
1.1 - 32 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• PERMANENT-CLEAN Automatic
Soil Removal: innovative filter
system eliminates manual pre-
cleaning. Soil is immediately removed
into an external strainer, which saves
operating costs and protects the
machine
• VISIOTRONIC Control: ensures a
simple and intuitive operating with
a single button. When the display is
activated by a proximity sensor, all
the necessary information appears in
the large display, in clear text or in the
form of symbols
• SENSO-ACTIVE Resource
Management: constantly measures
the quality of the wash water and
keeps the amount of rinsing needed
in each rinse cycle to the minimum
in order to guarantee a fully hygienic
wash result
• ECO Vapo Rinse: switchable steam
rinse cycle reduces fresh-water
consumption to 1.4 l/cycle. Saving of
up to 44 % water and chemicals
• Steam washing: significantly less
manual pre-cleaning and second runs
by intensive wash cycles with steam
• Exhaust energy storage: the fully
enclosed 4-sided hood keeps steam
and energy inside the system: energy
saving up to 3 kW/h, less humidity in
the kitchen area and better hygienic
conditions
• CLIP-IN Wash and Rinse Arms:
both the wash and rinse arms can be
lifted out of the wash chamber and
replaced with one hand and without
any tools
• ROTOR-X Wash System: separate
rotating upper & lower 4-spoke wash
arms deliver dynamic wash power
• POWER-PLUS Wash Programme:
selectable high-pressure programme
to wash heavily soiled wash items
• Filter position sensor: prevents
operation without tank strainer
• Intelligent energy management:
the available energy is used
continuously. Thus, at a low total
loading value the heating time gets
reduced
• EASY-CLEAN Concept: blue
markings in the machine help the
operator to identify the components
which require cleaning
AUP - PREMAX GLASS, DISH AND UTENSILWASHER
TECHNICAL DATA
DIMENSIONAL DRAWING
711
440
860*
1510
*19
95*
200*/** 635107
635
815
107
* 25 mm adjustable feet** 110 mm with heat recovery
+
−
6
837*
845
400
210
CONNECTIONS
*Thermostop guarantees required temperatures with cold water, the actual cycle times extend accordingly.
For corner operation we recommend to make the right side of the machine accessible for service.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water
softener or a HOBART HYDROLINE water treatment system.
1.1 - 33EFFECTIVE: 01. January 2015
BASIC MODEL
• Hood-type dishwasher with switchable high pressure wash
for straight through or corner operation
• Nominal capacity up to 70 racks/h or 1,260 plates/h or
2,520 glasses/h
• 8 automatic cycles: short, standard, intensive, eco,
cutlery, starch-removal, permanent, hygiene
• Multi-Setting: booster capacity may be reduced from 12.4
kW to 6.2 kW if connected with hot water
• Heat and noise insulated hood
• Strainer soil sensor
• Refill signal (detergent / rinse aid)
• Self-cleaning programme
• USB-interface for comfortable download of operational
data
• Ready to install - completely equipped: fill / drain hose,
electrical cable, detergent dispenser, rinse aid dispenser,
rinse pump, drain pump, back-flow preventer
• Tank, frame, wash / rinse arms and panels are stainless
steel 1,4301
• 2 plate racks P-18-12
• 1 universal flat rack B-00-07
• 1 plastic cutlery rack CB8
ORDER NO. DESCRIPTION €
AUP-10A Basic model 11.890,-
AUPS-10A with integrated water softener 12.505,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
SEF-14/030 VAPOSTOP Hood System prevents vapour escaping from the machine when the
hood is opened
1.660,-
SEF-14/056 Automatic hoodlift closes the hood by pressing the start button and opens
automatically at the end of the cycle
(loading height: 440 mm, back panel is required)
2.020,-
SEF-14/021 Drain heat recovery for AUP on request
01-515960-001 Back panel (if unit is not installed against wall.
All units have closing frame to wall at rear)
385,-
ML71726 Corner splash panel for open distance to the wall in case of corner installation 95,-
SEF-14/065 Thermolabel temperature setting on request
AUP - PREMAX GLASS, DISH AND UTENSILWASHER
For best wash results, we recommend the HOBART chemical range HYLINE and the HOBART water
treatment systems HYDROLINE.
1.1 - 34 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• PERMANENT-CLEAN Automatic
Soil Removal: innovative filter
system eliminates manual pre-
cleaning. Soil is immediately removed
into an external strainer, which saves
operating costs and protects the
machine
• VISIOTRONIC Control: ensures a
simple and intuitive operating with
a single button. When the display is
activated by a proximity sensor, all
the necessary information appears in
the large display, in clear text or in the
form of symbols
• SENSO-ACTIVE Resource
Management: constantly measures
the quality of the wash water and
keeps the amount of rinsing needed
in each rinse cycle to the minimum
in order to guarantee a fully hygienic
wash result
• XL Wash Chamber: the large hood
and chamber provide best wash
results, e.g. for
– up to 24 plates/rack
– up to 8 sheets 600 x 400 mm
– up to 8 trays 660 x 500 mm
– up to 2 1/1 GN-boxes
• ECO Vapo Rinse: switchable steam
rinse cycle reduces fresh-water
consumption to 1.4 l/cycle. Saving of
up to 44 % water and chemicals
• Steam washing: significantly less
manual pre-cleaning and second runs
by intensive wash cycles with steam
• Exhaust energy storage: the fully
enclosed 4-sided hood keeps steam
and energy inside the system: energy
saving up to 3 kW/h, less humidity in
the kitchen area and better hygienic
conditions
• CLIP-IN Wash and Rinse Arms:
both the wash and rinse arms can be
lifted out of the wash chamber and
replaced with one hand and without
any tools
• ROTOR-X Wash System: separate
rotating upper & lower 4-spoke wash
arms deliver dynamic wash power
• POWER-PLUS Wash Programme:
selectable high-pressure programme
to wash heavily soiled wash items
• Filter position sensor: prevents
operation without tank strainer
• Intelligent energy management:
the available energy is used
continuously. Thus, at a low total
loading value the heating time gets
reduced
• EASY-CLEAN Concept: blue
markings in the machine help the
operator to identify the components
which require cleaning
AUPL - PREMAX DISH AND UTENSILWASHER, LARGE
TECHNICAL DATA
DIMENSIONAL DRAWING
* 25 mm adjustable feet** 110 mm with heat recovery
+
− For corner installation max. table profile height is 40 mm
811
540
860*
1610
*21
95*
200*/
** 735107
635
815
107
6
40
210
837*
400
945
CONNECTIONS
*Thermostop guarantees required temperatures with cold water, the actual cycle times extend accordingly.
For corner operation we recommend to make the right side of the machine accessible for service.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water
softener or a HOBART HYDROLINE water treatment system.
1.1 - 35EFFECTIVE: 01. January 2015
BASIC MODEL
• Hood-type dishwasher with switchable high pressure wash
for straight through or corner operation
• Nominal capacity up to 70 racks/h, 1,260 plates/h, 2,520
glasses/h, 560 sheets/h, 140 1/1 GN-boxes/h, 70 EN-
boxes/h
• Large chamber with 660 x 500 mm usable space
• Extra large loading height of 540 mm
• 8 automatic cycles: short, standard, intensive, eco,
cutlery, starch-removal, permanent, hygiene
• Multi-Setting: booster capacity may be reduced from 12.4
kW to 6.2 kW if connected with hot water
• Heat and noise insulated hood
• Strainer soil sensor
• Refill signal (detergent / rinse aid)
• Self-cleaning programme
• USB-interface for comfortable download of operational
data
• Ready to install - completely equipped: fill / drain hose,
electrical cable, detergent dispenser, rinse aid dispenser,
rinse pump, drain pump, back-flow preventer
• Tank, frame, wash / rinse arms and panels are stainless
steel 1,4301
• 1 plate rack P-18-12
• 1 tray rack T-06-09
• 1 cutlery rack C-01-07
ORDER NO. DESCRIPTION €
AUPL-10A Basic model 13.225,-
AUPLS-10A with integrated water softener 13.840,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
SEF-14/047 VAPOSTOP Hood System prevents vapour escaping from the machine when the
hood is opened
1.660,-
SEF-14/135 Automatic hoodlift closes the hood by pressing the start button and opens
automatically at the end of the cycle
(loading height: 440 mm, back panel is required)
2.020,-
01-539553-001 Back panel (if unit is not installed against wall, all units have closing frame to wall at
rear)
485,-
ML71726 Corner splash panel for open distance to the wall in case of corner installation 95,-
T-XL Tray rack 600 x 500 mm
for 10 GN-trays or 12 trays up to 470 mm length, height 11 cm
105,-
P-XL Plate rack 600 x 500 mm
for 24 plates up to 240 mm Ø or 22 large plates (285 mm Ø)
height 11 cm
105,-
B-XL Universal flat rack 600 x 500 mm
with wide mesh bottom
(for example for cutlery baskets for cutlery in upright position)
height 11 cm
105,-
SEF-14/066 Thermolabel temperature setting on request
AUPL - PREMAX DISH AND UTENSILWASHER, LARGE
For best wash results, we recommend the HOBART chemical range HYLINE and the HOBART water
treatment systems HYDROLINE.
1.1 - 36 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• PERMANENT-CLEAN Automatic
Soil Removal: innovative filter
system eliminates manual pre-
cleaning. Soil is immediately removed
into an external strainer, which saves
operating costs and protects the
machine
• Double capacity: the double wide
wash chamber can cover 2 racks or
bigger containers
• VISIOTRONIC Control: ensures a
simple and intuitive operating with
a single button. When the display is
activated by a proximity sensor, all
the necessary information appears in
the large display, in clear text or in the
form of symbols
• SENSO-ACTIVE Resource
Management: constantly measures
the quality of the wash water and
keeps the amount of rinsing needed
in each rinse cycle to the minimum
in order to guarantee a fully hygienic
wash result
• ECO Vapo Rinse: switchable steam
rinse cycle reduces fresh-water
consumption to 1.4 l/cycle. Saving of
up to 44 % water and chemicals
• Steam washing: significantly less
manual pre-cleaning and second runs
by intensive wash cycles with steam
• Exhaust energy storage: the fully
enclosed 4-sided hood keeps steam
and energy inside the system: energy
saving up to 6 kW/h; less humidity in
the kitchen area and better hygienic
conditions
• CLIP-IN Wash and Rinse Arms:
both the wash and rinse arms can be
lifted out of the wash chamber and
replaced with one hand and without
any tools
• ROTOR-X Wash System: separate
rotating upper & lower 4-spoke wash
arms deliver dynamic wash power
• POWER-PLUS Wash Programme:
selectable high-pressure programme
to wash heavily soiled wash items
• Filter position sensor: prevents
operation without tank strainer
• Intelligent energy management:
the available energy is used
continuously. Thus, at a low total
loading value the heating time gets
reduced
• EASY-CLEAN Concept: blue
markings in the machine help the
operator to identify the components
which require cleaning
AUPT - PREMAX DISH AND UTENSILWASHER, DOUBLE RACK
TECHNICAL DATA
DIMENSIONAL DRAWING
440
860*
1510
*19
95*
200*/
**
14791269
635
815
107
1345
* 25 mm adjustable feet** 110 mm with heat recovery
+
−
6
210
400
837*
CONNECTIONS
*Thermostop guarantees required temperatures with cold water, the actual cycle times extend accordingly.
For corner operation we recommend to make the right side of the machine accessible for service.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water
softener or a HOBART HYDROLINE water treatment system.
1.1 - 37EFFECTIVE: 01. January 2015
BASIC MODEL
• Double rack hood-type dishwasher for straight through or
corner operation
• Nominal capacity up to 140 racks/h, 2,520 plates/h or
5,040 glasses/h
• 8 automatic cycles: short, standard, intensive, eco,
cutlery, starch-removal, permanent, hygiene
• Multi-Setting: booster capacity may be reduced from 12.4
kW to 6.2 kW if connected with hot water
• Heat and noise insulated hood
• Strainer soil sensor
• Refill signal (detergent / rinse aid)
• Self-cleaning programme
• USB-interface for comfortable download of operational
data
• Ready to install - completely equipped: fill / drain hose,
electrical cable, detergent dispenser, rinse aid dispenser,
rinse pump, drain pump, back-flow preventer
• Tank, frame, wash / rinse arms and panels are stainless
steel 1,4301
• 4 plate racks P-18-12
• 1 cutlery rack C-01-07
ORDER NO. DESCRIPTION €
AUPT-10A Basic model 19.065,-
SD-H High performance double cartridge softener 1.840,-
IS1 Hose, 1,500 mm, 3/4", DN15, reinforced with stainless steel for basic installation 70,-
IS4 Non-return valve for fresh-water connection class HD according DIN EN 1717 85,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
SEF-14/053 VAPOSTOP Hood System prevents vapour escaping from the machine when the
hood is opened
3.320,-
SEF-14/041 Automatic hoodlift closes the hood by pressing the start button and opens
automatically at the end of the cycle
(loading height: 440 mm, back panel is required)
2.020,-
SEF-14/050 Separate tank fill 3.590,-
01-515991-001 Back panel
(if unit is not installed against wall, all units have closing frame to wall at rear)
795,-
ML71726 Corner splash panel for open distance to the wall in case of corner installation 95,-
SEF-14/067 Thermolabel temperature setting on request
AUPT - PREMAX DISH AND UTENSILWASHER, DOUBLE RACK
For best wash results, we recommend the HOBART chemical range HYLINE and the HOBART water
treatment systems HYDROLINE.
1.2 Tabling programme
Standard tabling programme
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Standard tables 600 / 700 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Standard tables 1,100 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Euro tabling programme
Overview euro tabling programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Table without sink, without splash panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Table without sink, with splash panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Table with sink 500 x 400 x 250 mm, with splash panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Corner tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Sorting tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connecting table with sink, without splash panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Roller tabling programme
Roller tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Roller tables with lateral rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Hinged roller tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
System Examples Euro Tabling
System Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
System Examples Euro Tabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Wall shelves
Wall shelves with drip channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Accessories
Accessories euro tabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
1.2 - 3EFFECTIVE: 01. January 2015
STANDARD TABLES 600 / 700 MM
MODEL DESCRIPTION
• Standard table
• 540 mm wide, for 1 rack
• triangular with rack guiding rails
• machine connection on left or right hand side
ORDER NO.
Table position
left right €
Standard table, 600 mm
with console
with open base
ML60401 ML60401 815,-
Standard table with sink, 700 mm
- sink 500 x 400 x 250 mm
- stainless steel 1.4301 top plate 1.5 mm
- stainless steel square base construction with
adjustable feet
ML60103 ML60103 1.090,-
as above but with stainless steel storage board ML60104 ML60104 1.245,-
as above but with stainless steel storage grid ML60105 ML60105 1.245,-
OPTIONAL EQUIPMENT
Overhead spray with tap and mixing valve
• for operation of tap or shower
• for connection to hot and cold water 1/2" each
605237 610,-
Splash protection panel
for standard table 700 mm
700 x 360 mm, with holes for mixing valve
ML77077 315,-
Strainer insert for sink,
stainless steel, 500 x 400 mm
ML60394 350,-
Corner strainer insert
for sink 500 x 400 x 250 mm
734834-1 145,-
1.2 - 4 EFFECTIVE: 01. January 2015
MODEL DESCRIPTION
• Standard table
• 540 mm wide, for 1 rack
• triangular with rack guiding rails
• Stainless steel top plate 1,5 mm
• Stainless steel square base construction with adjustable feet
ORDER NO.
Table position
left right €
Standard table without sink, 1,100 mm ML60106 ML60106 925,-
as above but with stainless steel storage board ML60107 ML60107 995,-
as above but with stainless steel storage grid ML60108 ML60108 1.085,-
Standard table with sink, 1,100 mm
- sink 500 x 400 x 250 mm
- including plug, drain 1 1/2"
ML60109 ML60109 1.375,-
as above but with stainless steel storage board ML60110 ML60110 1.525,-
as above but with stainless steel storage grid ML60111 ML60111 1.700,-
OPTIONAL EQUIPMENT
Overhead spray with tap and mixing valve
• for operation of tap or shower
• for connection to hot and cold water 1/2" each
605237 610,-
Splash protection panel
for standard table 1,100 mm
1,100 x 360 mm, with holes for mixing valve
ML77078 315,-
Strainer insert for sink,
stainless steel, 500 x 400 mm
ML60394 350,-
Corner strainer insert
for sink 500 x 400 x 250 mm
734834-1 145,-
STANDARD TABLES 1,100 MM
1.2 - 6 EFFECTIVE: 01. January 2015
MODEL DESCRIPTION
• Table without sink, 635 mm wide
• triangular with rack guiding rails
• machine connection on left or right hand side
• with sloped drain towards the machine
• table sheet 1.5 mm, stainless steel
• base made of stainless steel square profile-type with height-adjustable plastic bolts
ORDER NO.
Table position
left right €
Standard table 700 mm
with open base
ML60011 ML60011 1.025,-
Standard table 700 mm
with storage board
ML60013 ML60013 1.045,-
Standard table 1.200 mm
with open base
ML60014 ML60014 1.180,-
Standard table 1.200 mm
with storage board
ML60016 ML60016 1.505,-
Standard table 1.700 mm
with open base
ML60017 ML60017 1.285,-
Standard table 1.700 mm
with storage board
ML60019 ML60019 1.585,-
Table position
left right €per
metre
Table with open base
non-standard length per metre
1.510,-
Table with storage grid
non-standard length per metre
2.140,-
Table with storage board
non-standard length per metre
1.735,-
TABLE WITHOUT SINK, WITHOUT SPLASH PANEL
Please note: length is selectable in 10 mm steps
Pricing per started 100 mm
L: specify table length in mm. Min. 600 mm
For C-line Tabling use price of non-standard length
1.2 - 7EFFECTIVE: 01. January 2015
TABLE WITHOUT SINK, WITH SPLASH PANEL
MODEL DESCRIPTION
• Table , 635 mm wide without sink, with splash panel 360 mm high
• Panel over whole length of table (integrated in profile) closed on both sides
• triangular with rack guiding rails
• machine connection on left or right hand side
• with sloped drain towards the machine
• table sheet 1.5 mm, stainless steel
• base made of stainless steel square profile-type with height-adjustable plastic bolts
ORDER NO.
Table position
left right €
Standard table 700 mm with splash panel
with open base
ML61504 ML61501 1.505,-
Standard table 700 mm with splash panel
with storage board
ML61506 ML61503 1.525,-
Standard table 1,200 mm with Splash panel
with open base
ML61511 ML61508 1.700,-
Standard table 1,200 mm with splash panel
with storage board
ML61513 ML61510 1.830,-
Standard table 1,700 mm with splash panel
with open base
ML61518 ML61515 1.890,-
Standard table 1,700 mm with splash panel
with storage board
ML61520 ML61517 2.115,-
Table position
left right €per
metre
Table with open base
non-standard length per metre
1.965,-
Table with storage grid
non-standard length per metre
2.590,-
Table with storage board
non-standard length per metre
2.185,-
Please note: length is selectable in 10 mm steps
Pricing per started 100 mm
L: specify table length in mm. Min. 600 mm
For C-line Tabling use price of non-standard length
1.2 - 8 EFFECTIVE: 01. January 2015
MODEL DESCRIPTION
• Table, 635 mm wide with welded sink, 500 x 400 x 250 mm, including plug
• with splash panel 360 mm high
• Panel over whole length of table (integrated in profile) closed on both sides
• triangular with rack guiding rails
• machine connection on left or right hand side
• with sloped drain towards the machine
• table sheet 1.5 mm, stainless steel
• base made of stainless steel square profile-type with height-adjustable plastic bolts
• drain 1 1/2" in the rear to the machine
• splash protection panel integrated into profile
(Standard has 2 holes for overhead spray 605237. If not required please specify with the order)
ORDER NO.
Table position
left right €
Standard table 700 mm, splash panel, sink
with open base
ML60027 ML60043 1.930,-
Standard table 700 mm, splash panel, sink
with storage board
ML60029 ML60045 1.950,-
Standard table 1,200 mm, splash panel, sink
with open base
ML60030 ML60046 2.380,-
Standard table 1,200 mm, splash panel, sink
with storage board
ML60032 ML60048 2.435,-
Standard table 1,700 mm, splash panel, sink
with open base
ML60033 ML60049 2.505,-
Standard table 1,700 mm, splash panel, sink
with storage board
ML60035 ML60051 2.605,-
Table position
left right €per
metre
Table with open base (sink not included)
non-standard length per metre
1.965,-
Table with storage grid (sink not included)
non-standard length per metre
2.590,-
Table with storage board (sink not included)
non-standard length per metre
2.265,-
OPTIONAL EQUIPMENT
Sink incl. plug 500 x 400 x 250 mm
(price per sink)
378819-1 (R/L), 378819-2
(L/R)
955,-
TABLE WITH SINK 500 X 400 X 250 MM, WITH SPLASH PANEL
Please note: length is selectable in 10 mm steps
Pricing per started 100 mm + price for sink
L: specify table length in mm, min. 600 mm
W: specify in mm if distance of sink to boarder is not 350 mm (standard). Min. 100 mm necessary
For C-line Tabling use price of non-standard length
1.2 - 9EFFECTIVE: 01. January 2015
TABLE WITH SINK 500 X 400 X 250 MM, WITH SPLASH PANEL
Stand pipe for sink 175 mm high 168349 40,-
Strainer insert for sink,
stainless steel, 500 x 400 mm
ML60394 350,-
Front panel to cover sink per metre 435,-
Overhead handspray with flexible hose
self-closing spray head, wall fixing and
cold water shut-off valve 1/2"
24784 685,-
Mixing valve with flexible arm, 1/2" ML169620 180,-
Overhead spray with tap and mixing valve
• for operation of tap or shower
• for connection to hot and cold water 1/2" each
605237 610,-
Overhead spray with wall-mounted tab and
mixing valve
for operation of tap or spray head
for hot and cold water connection, 1/2" each
699701 730,-
Overhead spray with tap and mixing valve
special robust version and wall mounted
734715 870,-
Please note: length is selectable in 10 mm steps
Pricing per started 100 mm + price for sink
L: specify table length in mm, min. 600 mm
W: specify in mm if distance of sink to boarder is not 350 mm (standard). Min. 100 mm necessary
For C-line Tabling use price of non-standard length
1.2 - 10 EFFECTIVE: 01. January 2015
MODEL DESCRIPTION
• Corner table 700 x 700 x 635 mm
• with 2 plastic bolts
• open base
ORDER NO.
Table position
left right €
Corner table
with open base
ML106447 ML106447 1.135,-
CORNER TABLES
1.2 - 11EFFECTIVE: 01. January 2015
SORTING TABLES
MODEL DESCRIPTION
• Sorting table 1,200 mm wide(due to length extended to 1,250 mm)
• with rack guiding rails to be linked up with connection table
• table sheet 1.5 mm stainless steel, with pressed drain channels and droplet drain 1 1 /2“
• open base of square legs, stainless steel incl. height-adjustable plastic bolts
ORDER NO.
Table position
left right €
Standard table 1.600 mm
with open base
ML60059 ML60075 3.615,-
Standard table 1.600 mm
with storage board
ML60062 ML60078 3.770,-
Standard table 2.100 mm
with open base
ML60064 ML60080 4.515,-
Standard table 2.100 mm
with storage board
ML60067 ML60083 4.750,-
Standard table 2.600 mm
with open base
ML60069 ML60085 4.785,-
Standard table 2.600 mm
with storage board
ML60072 ML60088 5.130,-
OPTIONAL EQUIPMENT
Overhead shelf for sorting table 1,600 mm
for sloped glass and cup racks
666 mm wide, stainless steel, with droplet drain
ML106444 1.675,-
Overhead shelf for sorting table 2,100 mm ML106445 1.935,-
Overhead shelf for sorting table 2,600 mm ML106446 2.080,-
Overhead shelf for sorting table
non-standard length per metre (max. 3100 mm)
1.905,-
1.2 - 12 EFFECTIVE: 01. January 2015
MODEL DESCRIPTION
• Connecting table stainless steel
• for sorting table 1,000 x 635 mm (without sink)
• open on both sides
ORDER NO.
Table position
left right €
Connecting table 1.000 mm
with open base
ML106442 ML106442 850,-
OPTIONAL EQUIPMENT
Storage board for connecting table 1,000 mm ML77059 315,-
Storage grid for connecting table 1,000 mm ML77032 385,-
CONNECTING TABLES
1.2 - 13EFFECTIVE: 01. January 2015
CONNECTING TABLE WITH SINK, WITHOUT SPLASH PANEL
MODEL DESCRIPTION
• Connecting table stainless steel
• with integrated welded sink 500 x 400 x 250 mm incl. plug
• for sorting table 1,000 x 635 mm
• open on both sides
ORDER NO.
Table position
left right €
Connecting table 1.000 mm
incl. sink 500 x 400 x 250 mm
with open base
ML77170 ML77171 1.485,-
OPTIONAL EQUIPMENT
Storage board for connecting table 1,000 mm ML77059 315,-
Storage grid for connecting table 1,000 mm ML77032 385,-
Splash protection panel for connecting table
standard has 2 holes for overhead spray and
mixing valve 605237
If not required please specify with order
ML61832 445,-
Sink incl. plug 500 x 400 x 250 mm
(price per sink)
378819-1 (R/L), 378819-2
(L/R)
955,-
Overhead handspray with flexible hose
self-closing spray head, wall fixing and
cold water shut-off valve 1/2"
24784 685,-
Mixing valve with flexible arm, 1/2" ML169620 180,-
Overhead spray with tap and mixing valve
• for operation of tap or shower
• for connection to hot and cold water 1/2" each
605237 610,-
1.2 - 14 EFFECTIVE: 01. January 2015
Overhead spray with wall-mounted tab and
mixing valve
for operation of tap or spray head
for hot and cold water connection, 1/2" each
699701 730,-
Overhead spray with tap and mixing valve
special robust version and wall mounted
734715 870,-
CONNECTING TABLE WITH SINK, WITHOUT SPLASH PANEL
1.2 - 15EFFECTIVE: 01. January 2015
ROLLER TABLES
MODEL DESCRIPTION
• Roller table
• with plastic rollers
• stainless steel shaft
• incl. drop sink
• closed profile at end
• 635 mm wide
• rollers removable
• open base
ORDER NO.
Table position
left right €
Roller table 1,050 mm RF1050 RF1050 1.365,-
Roller table 1,550 mm RF1550 RF1550 1.755,-
Roller table 2,050 mm RF2050 RF2050 2.205,-
Roller table as 1,000 mm connecting table RFC1000 RFC1000 1.475,-
Roller table as 1,000 mm connecting table with
sink (area of sink with lateral rollers, removable in
one piece)
ML70280 ML70280 2.260,-
Table position
left right €per
metre
Roller table, open base, non-standard length 2.290,-
OPTIONAL EQUIPMENT
Storage board 1,050 mm ML70258 315,-
Storage board 1,550 mm ML70259 415,-
Storage board 2,050 mm ML70260 580,-
Storage board non-standard length per metre 490,-
Storage grid non-standard length per metre 690,-
Please note: length is selectable in 10 mm steps.
Pricing per started 100 mm.
L: specify table length in mm, min. 600 mm
1.2 - 16 EFFECTIVE: 01. January 2015
MODEL DESCRIPTION
• Roller table with lateral plastic rollers
• stainless steel shaft
• incl. drop sink
• closed profile at end
• 635 mm wide
• open base
ORDER NO.
Table position
left right €
Roller table 1,050 mm RL1050 RL1050 1.480,-
Roller table 1,550 mm RL1550 RL1550 1.755,-
Roller table 2,050 mm RL2050 RL2050 2.205,-
Table position
left right €per
metre
Roller table, open base, non-standard length 2.265,-
ROLLER TABLES WITH LATERAL ROLLERS
Please note: length is selectable in 10 mm steps.
Pricing per started 100 mm.
L: specify table length in mm, min. 600 mm
1.2 - 17EFFECTIVE: 01. January 2015
HINGED ROLLER TABLES
MODEL DESCRIPTION
• Hinged roller table on castors
• incl. drop sink
• closed profile at end
• 635 mm wide
• rollers removable
• incl. drain connection leading to curve
• with welded rods
• open base
ORDER NO.
Table position
left right €
Hinged roller table 1,050 mm RFH1050 RFH1050 3.530,-
Hinged roller table 1,550 mm RFH1550 RFH1550 3.875,-
Hinged roller table 2,050 mm RFH2050 RFH2050 4.415,-
Table position
left right €per
metre
Hinged roller table with open base
non-standard length per metre
4.895,-
Hinged roller table with storage grid
non-standard length per metre
5.580,-
Hinged roller table with storage board
non-standard length per metre
5.375,-
Please note: length is selectable in 10 mm steps.
Pricing per started 100 mm.
L: specify table length in mm, min. 600 mm
1.2 - 19EFFECTIVE: 01. January 2015
SYSTEM EXAMPLES EURO TABLING
ORDER NO. DESCRIPTION €
Tables from Euro Tabling Programme
System 1 - Table 700 mm wide with sink (splash protection panel 700 mm
integrated)
- Overhead spray with tab and mixing valve
- Table 700 mm wide (in case of corner installation right hand side
only)
on request
System 2 - Table 1,200 mm wide with sink (splash protection panel
integrated)
- Overhead spray with tab and mixing valve
- Table 1,700 mm wide
on request
System 3 - Sorting table 2,100 mm wide
- Overhead shelf for sorting table
- Connecting table 1,000 mm with sink
- Overhead spray with tab and mixing valve
- Table 1,700 mm wide
on request
1.2 - 20 EFFECTIVE: 01. January 2015
ORDER NO. DESCRIPTION €
Wall shelves with closed drip channel
ML77250 Wall shelf with closed drip channel
and open drain connection DN 25
w x h: 470 x 232 mm incl. fixing material
(not for exit tables and conveyor belts)
600 mm for 1 rack
drain on left side
1.280,-
ML77255 Wall shelf 600 mm for 1 rack
drain on right side
1.280,-
ML77251 Wall shelf 1,050 for 2 racks
drain on left side
1.455,-
ML77256 Wall shelf 1,050 mm for 2 racks
drain on right side
1.455,-
ML77252 Wall shelf 1,550 mm for 3 racks
drain on left side
1.605,-
ML77257 Wall shelf 1,550 mm for 3 racks
drain on right side
1.605,-
Wall shelf non-standard length per metre
drain on left side
on request
WALL SHELVES WITH DRIP CHANNEL
1.2 - 21EFFECTIVE: 01. January 2015
ACCESSORIES EURO TABLING
ORDER NO. DESCRIPTION €
Side panel 240,-
ML106476 Rack support for 4 racks (without table)
suitable for tables of 635 mm width
Please specify table length!
430,-
Cutlery sinks / slides
168461 Cutlery sink, mobile 682 x 682 x 300 mm
with drain and 4 castors (2 with lock) 580 mm high
1.860,-
168461-1 Cutlery sink, mobile 682 x 682 x 300 mm
with drain and 4 castors (2 with lock) 770 mm high
2.435,-
ML106448 Cutlery slide, stainless steel 18/9 with height-adjustable tie bar
mounted under sorting table,
for sorting table 1600 mm
340,-
ML106449 Cutlery slide
for sorting table 2,100 mm
385,-
ML106475 Cutlery slide
for sorting table 2,600 mm
395,-
Waste stacks
ML57096 Waste stack, welded, Ø 250 mm
incl. hard rubber ring, integrated in Euro table
725,-
ML57098 Waste stack, welded, Ø 250 mm
incl. hard rubber ring, integrated in sorting table
935,-
168012 Waste stack, loose, Ø 250 mm
for site integration
130,-
1.3 Rack programme
Plastic racks
Overview rack programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Racks for plates, trays, cups, universal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Plastic racks 500 x 500 mm for glasses and cups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Steel wire racks - plastic coated
Steel wire racks (plastic coated) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Rack inserts
Inserts for 500 x 500 racks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.3 - 3EFFECTIVE: 01. January 2015
RACKS FOR PLATES, TRAYS, CUPS, UNIVERSAL
ORDER NO. DESCRIPTION €
Plate racks
P-18-12 Plate rack 500 x 500 mm
9 spaces, full peg
for 18 flat or 12 deep plates up to 260 mm Ø
or 9 trays up to 470 mm Ø
45,-
P-15 Plate rack 500 x 500 mm
for 15 plates from 180 mm to 320 mm Ø
70,-
P-XL Plate rack 600 x 500 mm
for 24 plates up to 240 mm Ø or 22 large plates (285 mm Ø)
height 11 cm
105,-
Tray racks
T-06-09 Tray rack 500 x 500 mm
for 9 GN- or EN-trays, open on one side
(not suitable for hood-type dishwashers in corner operation)
60,-
T-07-09 Tray rack 500 x 500 mm
for 9 GN-trays, open on two sides with stainless steal guide
(also suitable for hood-type dishwashers in corner operation)
260,-
T-XL Tray rack 600 x 500 mm
for 10 GN-trays or 12 trays up to 470 mm length, height 11 cm
105,-
774901-2 Tray rack 540 x 500 mm
stainless steel, with insert (250 mm high) for 5 isolating trays up to
GN-size and up to max. 70 mm thickness / tray
(not useful for heavy soiled trays)
430,-
Universal racks
B-00-07 Universal flat rack 500 x 500 mm
with wide mesh bottom
(for example for cutlery baskets for cutlery in upright position)
height 7 cm
45,-
B-00-11 Universal flat rack 500 x 500 mm
with wide mesh bottom
(for example for cutlery baskets for cutlery in upright position)
height 11 cm
75,-
B-00-16 Universal flat rack 500 x 500 mm
with wide mesh bottom
(for example for cutlery baskets for cutlery in upright position)
height 16 cm
85,-
B-XL Universal flat rack 600 x 500 mm
with wide mesh bottom
(for example for cutlery baskets for cutlery in upright position)
height 11 cm
105,-
884298-1 Universal flat rack
open on 2 sides with stainless steel guides
for GN-items
260,-
1.3 - 4 EFFECTIVE: 01. January 2015
ORDER NO. DESCRIPTION €
Cutlery racks
C-01-07 Cutlery rack 500 x 500 mm
with narrow mesh bottom
for cutlery in horizontal position, also usable as universal rack
45,-
CB1 Plastic cutlery box 90 x 90 mm, for appr. 20 pieces of cutlery 10,-
01-246175-1 Plastic cutlery rack 230 x 230 mm
with integral handles and 4 compartements, for appr. 80 pieces (4
x 20)
25,-
CB8 Plastic cutlery rack 460 x 230 mm
with handles and 8 compartments for appr. 160 pieces (8 x 20)
35,-
RACKS FOR PLATES, TRAYS, CUPS, UNIVERSAL
1.3 - 5EFFECTIVE: 01. January 2015
PLASTIC RACKS 500 X 500 MM FOR GLASSES AND CUPS
ORDER NO. DESCRIPTION €
9 compartments 146 x 146 mm, without sloped rows
F-09-07 Inside height 7 cm for glasses up to 7 cm 65,-
F-09-11 Insight height 11 cm for glasses up to 11 cm 95,-
F-09-14 Inside height 14 cm for glasses up to 14 cm 130,-
F-09-18 Inside height 18 cm for glasses up to 18 cm 130,-
F-09-21 Inside height 21 cm for glasses up to 21 cm 135,-
F-09-26 Inside height 26 cm for glasses up to 26 cm 135,-
9 compartments 146 x 146 mm, with sloped rows
S-09-07 Inside height 7 cm for glasses up to 5 cm 70,-
S-09-11 Inside height 11 cm for glasses up to 9 cm 105,-
S-09-14 Inside height 14 cm for glasses up to 12 cm 135,-
S-09-18 Inside height 18 cm for glasses up to 16 cm 135,-
S-09-21 Inside height 21 cm for glasses up to 19 cm 140,-
S-09-26 Inside height 26 cm for glasses up to 24 cm 140,-
16 compartments 113 x 113 mm, without sloped rows
F-16-07 Inside height 7 cm for glasses up to 7 cm 70,-
F-16-11 Inside height 11 cm for glasses up to 11 cm 110,-
F-16-14 Inside height 14 cm for glasses up to 14 cm 140,-
F-16-18 Inside height 18 cm for glasses up to 18 cm 140,-
F-16-21 Inside height 21 cm for glasses up to 21 cm 150,-
F-16-26 Inside height 26 cm for glasses up to 26 cm 150,-
16 compartments 113 x 113 mm, with sloped rows
S-16-07 Inside height 7 cm for glasses up to 5 cm 75,-
S-16-11 Inside height 11 cm for glasses up to 9 cm 120,-
S-16-14 Inside height 14 cm for glasses up to 12 cm 145,-
S-16-18 Inside height 18 cm for glasses up to 16 cm 145,-
S-16-21 Inside height 21 cm for glasses up to 19 cm 160,-
S-16-26 Inside height 26 cm for glasses up to 24 cm 160,-
20 compartments 113 x 88 mm, with sloped rows
S-20-07 Inside height 7 cm for glasses up to 5 cm 75,-
S-20-11 Inside height 11 cm for glasses up to 9 cm 125,-
S-20-14 Inside height 14 cm for glasses up to 12 cm 160,-
S-20-18 Inside height 18 cm for glasses up to 16 cm 160,-
S-20-21 Inside height 21 cm for glasses up to 19 cm 165,-
S-20-26 Inside height 26 cm for glasses up to 24 cm 165,-
24 compartments 113 x 74 mm, with sloped rows
S-24-07 Inside height 7 cm for glasses up to 5 cm 75,-
S-24-11 Inside height 11 cm for glasses up to 9 cm 130,-
S-24-14 Inside height 14 cm for glasses up to 12 cm 160,-
S-24-18 Inside height 18 cm for glasses up to 16 cm 160,-
S-24-21 Inside height 21 cm for glasses up to 19 cm 170,-
S-24-26 Inside height 26 cm for glasses up to 24 cm 170,-
1.3 - 6 EFFECTIVE: 01. January 2015
ORDER NO. DESCRIPTION €
25 compartments 88 x 88 mm, without sloped rows
F-25-07 Inside height 7 cm for glasses up to 7 cm 85,-
F-25-11 Inside height 11 cm for glasses up to 11 cm 135,-
F-25-14 Inside height 14 cm for glasses up to 14 cm 160,-
F-25-18 Inside height 18 cm for glasses up to 18 cm 160,-
F-25-21 Inside height 21 cm for glasses up to 21 cm 175,-
F-25-26 Inside height 26 cm for glasses up to 26 cm 175,-
25 compartments 88 x 88 mm, with sloped rows
S-25-07 Inside height 7 cm for glasses up to 5 cm 95,-
S-25-11 Inside height 11 cm for glasses up to 9 cm 145,-
S-25-14 Inside height 14 cm for glasses up to 12 cm 175,-
S-25-18 Inside height 18 cm for glasses up to 16 cm 175,-
S-25-21 Inside height 21 cm for glasses up to 19 cm 190,-
S-25-26 Inside height 26 cm for glasses up to 24 cm 190,-
30 compartments 88 x 73 mm, with sloped rows
S-30-07 Inside height 7 cm for glasses up to 5 cm 90,-
S-30-11 Inside height 11 cm for glasses up to 9 cm 140,-
S-30-14 Inside height 14 cm for glasses up to 12 cm 170,-
S-30-18 Inside height 18 cm for glasses up to 16 cm 170,-
S-30-21 Inside height 21 cm for glasses up to 19 cm 190,-
S-30-26 Inside height 26 cm for glasses up to 24 cm 190,-
35 compartments 88 x 63 mm, with sloped rows
S-35-07 Inside height 7 cm for glasses up to 5 cm 105,-
S-35-11 Inside height 11 cm for glasses up to 9 cm 150,-
S-35-14 Inside height 14 cm for glasses up to 12 cm 175,-
S-35-18 Inside height 18 cm for glasses up to 16 cm 175,-
S-35-21 Inside height 21 cm for glasses up to 19 cm 195,-
S-35-26 Inside height 26 cm for glasses up to 24 cm 195,-
36 compartments 73 x 73 mm, without sloped rows
F-36-07 Inside height 7 cm for glasses up to 7 cm 75,-
F-36-11 Inside height 11 cm for glasses up to 11 cm 130,-
F-36-14 Inside height 14 cm for glasses up to 14 cm 160,-
F-36-18 Inside height 18 cm for glasses up to 18 cm 160,-
F-36-21 Inside height 21 cm for glasses up to 21 cm 185,-
F-36-26 Inside height 26 cm for glasses up to 26 cm 185,-
42 compartments 73 x 63 mm, with sloped rows
S-42-07 Inside height 7 cm for glasses up to 5 cm 105,-
S-42-11 Inside height 11 cm for glasses up to 9 cm 150,-
S-42-14 Inside height 14 cm for glasses up to 12 cm 190,-
S-42-18 Inside height 18 cm for glasses up to 16 cm 190,-
S-42-21 Inside height 21 cm for glasses up to 19 cm 205,-
S-42-26 Inside height 26 cm for glasses up to 24 cm 205,-
PLASTIC RACKS 500 X 500 MM FOR GLASSES AND CUPS
1.3 - 7EFFECTIVE: 01. January 2015
PLASTIC RACKS 500 X 500 MM FOR GLASSES AND CUPS
ORDER NO. DESCRIPTION €
49 compartments 63 x 63 mm, without sloped rows
F-49-07 Inside height 7 cm for glasses up to 7 cm 75,-
F-49-11 Inside height 11 cm for glasses up to 11 cm 140,-
F-49-14 Inside height 14 cm for glasses up to 14 cm 170,-
F-49-18 Inside height 18 cm for glasses up to 18 cm 170,-
F-49-21 Inside height 21 cm for glasses up to 21 cm 190,-
F-49-26 Inside height 26 cm for glasses up to 26 cm 190,-
Rack accessories
54889 Covering sieve 432 x 432 mm
for light and fragile wash ware
45,-
303245-20 Metal-Clip for automatic switch-on of DEMI-rinse, suitable for glass
racks, 1 Set (= 4 pieces)
70,-
303264 Metal-Clip for automatic switch-on of DEMI rinse, suitable for C-01-
07, 1 piece
25,-
303313 Plastic dust bag, 1.70 m long, for 7 - 8 racks 25,-
303245-1 Colour code buttons one set of four buttons, dark blue 5,-
303245-3 Colour code buttons one set of four buttons, white 5,-
303245-5 Colour code buttons one set of four buttons, orange 5,-
303245-9 Colour code buttons one set of four buttons, red 5,-
303245-6 Colour code buttons one set of four buttons, yellow 5,-
303245-12 Colour code buttons one set of four buttons, light green 5,-
24857 Rackcart 600 x 600 mm, stainless steel, for 8 - 12 racks, without
handle, with 2 swivel- and 2 fixed casters, loose delivered
260,-
24983 Rackcart 600 x 600 mm, stainless steel, for 8 - 12 racks, with
handle, with 2 swivel- and 2 fixed casters, loose delivered
435,-
1.3 - 8 EFFECTIVE: 01. January 2015
ORDER NO. DESCRIPTION €
Universal glass racks
303171 Universal glass rack 500 x 470 mm, high version, with 4 sloped
rows à 95 mm, height 180 mm, plastic coated (suitable for front
door dishwashers)
75,-
378814 Universal glass rack 500 x 500 mm
high version with 5 sloped rows à 98 mm, plastic coated, height
180 mm
95,-
323989 Universal glass rack 500 x 500 mm, high version, with 4 sloped
rows à 103 mm, plastic coated, height 180 mm (not suitable for
Ecomax 502)
80,-
371450-84 Universal glass rack 400 x 400 mm, with 4 sloped rows à 90
mm, height 175 mm
90,-
01-294450-001 Glass rack ACTIVE Drying 400 x 400 mm
for PREMAX GCP, with 4 sloped rows
with glass positioning element for optimised drying results
195,-
Universal flat racks
371450-83 Universal flat rack 400 x 400 mm, without sloped rows, plastic
coated, height 115 mm
60,-
774178 Universal flat rack 500 x 500 mm, without sloped rows, plastic
coated, height 130 mm
50,-
897951 Bistro universal rack 400 x 400 mm, half side flat for cups, half
side for 13 small coffee plates, height 115 mm
105,-
STEEL WIRE RACKS (PLASTIC COATED)
1.3 - 9EFFECTIVE: 01. January 2015
INSERTS FOR 500 X 500 RACKS
ORDER NO. DESCRIPTION €
Wire rack inserts
694497 Cup insert for sloped position 500 x 500 mm
steel wire, plastic coated, for universal flat rack B-00-07
20,-
774847-1 Insert 495 x 430 mm
for 5 isolating trays up to max. 70 mm thickness of the trays,
without base track
165,-
324660 Sheet insert 500 x 500 mm, stainless steel, height 210 mm 130,-
883373-1 Sheet insert, stainless steel
for AMXXL or AUPL in corner operation
440,-
734697-1 Sheet insert 500 x 500 mm, for 3 sheets 600 x 400 mm in a
standard machine, height 210 mm
60,-
172831-1 Wire insert 500 x 500 mm for FP/FX/FXL and AMX/AMXX/AUP,
stainless steel, for pots etc.
120,-
PTE Wire insert, stainles steel, plastic coated, to insert into universal
rack B-00-07, for 9 flat or 5 deep plates or more than 260 mm Ø
75,-
01-243329-1 Insert for AMXXL or AUPL, stainless steel, flat, 655 x 530 mm,
allows loading of utensils without rack
360,-
1.4 Utensil Washers
Front Loading and Hood-type Utensil Washers
Front loading
UX - PROFI Utensil Washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
UP - PREMAX Utensil Washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
UXT - PROFI Utensil Washer, extra wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
UPT - PREMAX Utensil Washer, extra wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Hood-type
UXTH - PROFI Hood-type Utensil Washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
UXTLH - PROFI Hood-type Utensil Washer, extra high . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Tabling programme for UXT(L)H
Overview Euro Tabling for UXT(L)H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Exit table without sink for UXT(L)H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Entry table with sink 600 x 600 mm for UXT(L)H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Entry table with sink 800 x 600 mm for UXT(L)H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Front table for UXT(L)H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
System Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Rack Programme for Utensil Washers
Racks and inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Rack assortments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
1.4 - 2 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• POWER-PLUS Washing: high-
pressure washing to wash heavily
soiled wash items
• ROTOR-X Wash System: separate
rotating upper and lower 4-spoke
wash arms deliver dynamic wash
power
• ACCURINSE Rinse System:
constant rinse, independent of on-site
pressure
• Filter position sensor: prevents
operation without tank strainer
• SMARTRONIC Single-button
Control: colour coded status
indication and remaining time indicator
• Machine height 2-in-1: machine
height can be reduced by up to 217
mm with the door open – for use in
spaces with low ceilings
• Permanent wash programme:
due to a longer cycle time even
heavily soiled wash items are getting
perfectly clean
• VAPOSTOP Door System (optional):
prevents vapour to escape from
machine when door is opened
• The optional E-SAVE Drain Heat
Recovery transfers heat from hot
drain water to the fresh-water supply,
reducing boiler power consumption
and saving up to 5.2 kW/h
• GENIUS-X² Fine Filter System:
advanced filter system with pre-
wash function reduces detergent
consumption up to 35%
• Loading height L: above-average
loading height of 860 mm
• The optional exhaust heat recovery
with integrated Door System
VAPOSTOP uses steam to heat fresh
feed water and reduces the amount of
power needed to reach the final rinse
temperature, saving up to 3.1 kW/h
• Hygiene Programme: for removal of
calcium carbonate and other deposits
from wash chamber
UX - PROFI UTENSIL WASHER
TECHNICAL DATA
Cycle times* 120 / 240 / 360 sec. and special cycles
Water consumption 4.5 l/rackTank capacity 80 lTank heating 3.3 kWPower supply 400 / 50 / 3NBooster loadingStandard 12.3 kWAlternative 6.15 kWTotal loadingStandard 15.6 kW | 3 x 35 AAlternative 12.6 kW | 3 x 20 AWash pump 2.7 kWRack size 600 x 760 mmLoading height 860 mmNoise level 65 dB (A)Weight (gross / net) 230 / 215 kg
DIMENSIONAL DRAWING
OPTIONAL***200
705
78030
474
83
663
608
1984
150
±2
5
805
945
890
2417**
860*
390
OPTIONAL**** 334
* Einschubhöhe kann auf 650 mm reduziert werden** Höhe bei geöffneter Tür kann auf 2.200 mm reduziert werden*** bei Abluftwärmerückgewinnung**** bei Abwasserwärmerückgewinnung
CONNECTIONS
2,000 mm | R 3/4''Flow pressure 0.5 (0.8 with
softener) - 10 barMax. supply water temperature
60 °C
5 l/min1.800 mm
Supply hose for2.500 mm2.500 mm
*Thermostop guarantees required temperatures with cold water connection, the actual cycle times extend accordingly.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water
softener or an external water softener of the product line HYDROLINE PROTECT.
1.4 - 3EFFECTIVE: 01. January 2015
BASIC MODEL
• Front door utensil washer
• Useable inside dimensions w x d x h: 663 x 808 x 840
mm
• Nominal capacity up to 30 cycles/h
• 5 automatic cycles: short, standard, intensive, permanent,
hygiene
• Double walled housing
• Multi-Setting: booster capacity may be reduced from 12.3
kW to 6.15 kW if connected with hot water
• Strainer soil sensor
• Refill signal (detergent / rinse aid)
• Self-cleaning programme
• Ready to install - completely equipped: fill / drain hose,
electrical cable, detergent dispenser, rinse aid dispenser,
rinse pump, drain pump, back-flow preventer, tank heating
• Tank, frame, wash / rinse arms and panels are stainless
steel 1.4301
ORDER NO. DESCRIPTION €
UX-10N Basic model
Please note: Racks need to be ordered separately
13.890,-
UXS-10N with integrated water softener
Please note: Racks need to be ordered seperately
14.440,-
SD-H High performance double cartridge softener 1.840,-
IS1 Hose, 1,500 mm, 3/4", DN15, reinforced with stainless steel for basic installation 70,-
IS4 Non-return valve for fresh-water connection class HD according DIN EN 1717 85,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
SEF-10/108 Separate tank fill for UX and UXT
Supply water should be soft and warm (50 - 60°C)
on request
SEF-10/109 Separate tank fill for UXS
Supply water should be soft and warm (50 - 60°C)
on request
SEF-10/111 Integrated drain heat recovery
alternatively with 12.3 or 6.1 kW booster heater
(specify 12.3 kW for high capacity throughput and shorter fill times, 6.1 kW may allow
reduced total loading)
3.270,-
SEF-10/114 Integrated exhaust heat recovery and Door System VAPOSTOP for UX 2.940,-
SEF-10/115 Integrated exhaust heat recovery and Door System VAPOSTOP for UXS/UPS 2.940,-
ML71600 Rack assortment UX/UP: base rack 01-510508-1, rack insert 323753, cutlery rack
C-01-07
435,-
ML71601 Rack assortment UX/UP: base rack 01-510508-1, insert for 8 large bakery sheets
323637
365,-
01-510508-1 Basic rack 600 x 760 mm, for UX/UP Models 245,-
323637 Insert 568 x 625 mm, for 8 large sheets, distance between rows: 5.9 cm 120,-
323753 Insert 568 x 665 mm
suitable for plates, bowls, sheets, etc.
145,-
323796 Wire grid insert 600 x 700 mm, alternatively to basic rack, perfect for washing 2
boxes on one level
120,-
774847-1 Insert 495 x 430 mm
for 5 isolating trays up to max. 70 mm thickness of the trays, without base track
165,-
UX - PROFI UTENSIL WASHER
For best wash results, we recommend the HOBART chemical range HYLINE and the HOBART water
treatment systems HYDROLINE.
1.4 - 4 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• Extra capacity by side wash
system: capacity up to 6 GN-trays
1/1 or 4 EN2 container
• Detergent direct spraying system:
system soaks the wash ware following
the detergent pre-washing cycle
and softens even the most severely
encrusted food residues what reduces
the need for wash ware pre-soaking
and pre-washing
• Steam washing: significantly less
manual pre-cleaning and second runs
by intensive wash cycles with steam
injection
• POWER-PLUS Washing: high-
pressure washing to wash heavily
soiled wash items
• ROTOR-X Wash System: separate
rotating upper and lower 4-spoke
wash arms deliver dynamic wash
power
• ACCURINSE Rinse System:
constant rinse, independent of on-site
pressure
• Filter position sensor: prevents
operation without tank strainer
• SMARTRONIC Single-button
Control: colour coded status
indication and remaining time indicator
• VAPOSTOP Door System (optional):
prevents vapour to escape from
machine when door is opened
• The optional E-SAVE Drain Heat
Recovery transfers heat from hot
drain water to the fresh-water supply,
reducing boiler power consumption
and saving up to 7.4 kW/h
• GENIUS-X² Fine Filter System:
advanced filter system with pre-
wash function reduces detergent
consumption up to 35%
• Loading height L: above-average
loading height of 860 mm
• The optional exhaust heat recovery
with integrated Door System
VAPOSTOP uses steam to heat fresh
feed water and reduces the amount of
power needed to reach the final rinse
temperature, saving up to 4.5 kW/h
• Hygiene Programme: for removal of
calcium carbonate and other deposits
from wash chamber
UP - PREMAX UTENSIL WASHER
TECHNICAL DATA
Cycle times* 150 / 280 / 400 sec. and special cycles
Water consumption 8 l/rackTank capacity 80 lTank heating 3.3 kWPower supply 400 / 50 / 3NBooster loadingStandard 15 kWAlternative 9 kWTotal loadingStandard 18.5 kW | 3 x 35 AAlternative 15.4 kW | 3 x 25 AWash pump 2.7 kWRack size 600 x 760 mmLoading height 860 mmNoise level 65 dB (A)Weight (gross / net) 236 / 221 kg
DIMENSIONAL DRAWINGCONNECTIONS
2,000 mm | R 3/4''Flow pressure 0.8 - 10 barMax. supply water temperature
60 °C
5 l/min1.800 mm
Supply hose for2.500 mm2.500 mm
*Thermostop guarantees required temperatures with cold water connection, the actual cycle times extend accordingly.
1.4 - 5EFFECTIVE: 01. January 2015
BASIC MODEL
• Front door utensil washer
• Useable inside dimensions w x d x h: 520x808x840mm
• Nominal capacity up to 24 cycles/h
• 5 automatic programmes: short, steam washing,
detergent direct spraying, permanent, hygiene
• Double walled housing
• Strainer soil sensor
• Refill signal (detergent / rinse aid)
• Self-cleaning programme
• Ready to install - completely equipped: fill / drain hose,
electrical cable, detergent dispenser, rinse aid dispenser,
rinse pump, drain pump, back-flow preventer, tank heating,
separate tank fill (can be deactivated)
• Tank, frame, wash / rinse arms and panels are stainless
steal 1.4301
ORDER NO. DESCRIPTION €
UPS-10 with integrated water softener
Please note: Racks need to be ordered seperately
20.620,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
SEF-10/111 Integrated drain heat recovery
alternatively with 15 or 9 kW booster heater
(specify 15 kW for high capacity throughput and shorter fill times, 9 kW may allow
reduced total loading)
3.270,-
SEF-10/115 Integrated exhaust heat recovery and Door System VAPOSTOP for UXS/UPS 2.940,-
ML71600 Rack assortment UX/UP: base rack 01-510508-1, rack insert 323753, cutlery rack
C-01-07
435,-
ML71601 Rack assortment UX/UP: base rack 01-510508-1, insert for 8 large bakery sheets
323637
365,-
01-510508-1 Basic rack 600 x 760 mm, for UX/UP Models 245,-
323753 Insert 568 x 665 mm
suitable for plates, bowls, sheets, etc.
145,-
323796 Wire grid insert 600 x 700 mm, alternatively to basic rack, perfect for washing 2
boxes on one level
120,-
UP - PREMAX UTENSIL WASHER
For best wash results, we recommend the HOBART chemical range HYLINE and the HOBART water
treatment systems HYDROLINE.
1.4 - 6 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• POWER-PLUS Washing: high-
pressure washing to wash heavily
soiled wash items
• ROTOR-X Wash System: separate
rotating upper and lower 4-spoke
wash arms deliver dynamic wash
power
• ACCURINSE Rinse System:
constant rinse, independent of on-site
pressure
• Filter position sensor: prevents
operation without tank strainer
• SMARTRONIC Single-button
Control: colour coded status
indication and remaining time indicator
• Permanent wash programme:
due to a longer cycle time even
heavily soiled wash items are getting
perfectly clean
• VAPOSTOP Door System (optional):
prevents vapour to escape from
machine when door is opened
• The optional E-SAVE Drain Heat
Recovery transfers heat from hot
drain water to the fresh-water supply,
reducing boiler power consumption
and saving up to 8.6 kW/h
• GENIUS-X² Fine Filter System:
advanced filter system with pre-
wash function reduces detergent
consumption up to 35%
• Loading height L: above-average
loading height of 860 mm
• The optional exhaust heat recovery
with integrated Door System
VAPOSTOP uses steam to heat fresh
feed water and reduces the amount of
power needed to reach the final rinse
temperature, saving up to 5.2 kW/h
• Hygiene Programme: for removal of
calcium carbonate and other deposits
from wash chamber
UXT - PROFI UTENSIL WASHER, EXTRA WIDE
TECHNICAL DATA
Cycle times* 120 / 240 / 360 sec. and special cycles
Water consumption 8 l/rackTank capacity 130 lTank heating 6 kWPower supply 400 / 50 / 3NBooster loadingStandard 15 kWAlternative 9 kWTotal loadingStandard 21.6 kW / 3 x 50 AAlternative 15.7 kW | 3 x 35 AWash pump 2 x 2.7 kW | 2 x
1,300 l/minRack size 1,240 x 700 mmLoading height 860 mmNoise level 67 dB (A)Weight (gross / net) 332 / 312 kg
DIMENSIONAL DRAWING
OPTIONAL***
474OPTIONAL****
300
* Einschubhöhe kann auf 650 mm reduziert werden** Höhe bei geöffneter Tür kann
auf 2.200 mm reduziert werden*** bei Abluftwärmerückgewinnung**** bei Abwasserwärmerück- gewinnung
83
200
1984
150±
25
890
2417
**860*
390
30770945
13001375
12581208
CONNECTIONS
2,000 mm | R 3/4''Flow pressure 0.5 - 10 barMax. supply water temperature
60 °C
5 l/min1.800 mm
Supply hose for2.500 mm2.500 mm
*Thermostop guarantees required temperatures with cold water connection, the actual cycle times extend accordingly.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water
softener or an external water softener of the product line HYDROLINE PROTECT.
1.4 - 7EFFECTIVE: 01. January 2015
BASIC MODEL
• Front door utensil washer
• Useable inside dimensions w x d x h: 1258 x 773 x 825
mm
• Nominal capacity up to 30 cycles/h
• 5 automatic cycles: short, standard, intensive, permanent,
hygiene
• Double walled housing
• Multi-Setting: booster capacity may be reduced from 15
kW to 9 kW if connected with hot water
• Strainer soil sensor
• Refill signal (detergent / rinse aid)
• Self-cleaning programme
• Ready to install - completely equipped: fill / drain hose,
electrical cable, detergent dispenser, rinse aid dispenser,
rinse pump, drain pump, back-flow preventer, tank heating
• Tank, frame, wash / rinse arms and panels are stainless
steel 1,4301
ORDER NO. DESCRIPTION €
UXT-10N Basic model
Please note: Racks need to be ordered seperately
19.680,-
SD-H High performance double cartridge softener 1.840,-
IS1 Hose, 1,500 mm, 3/4", DN15, reinforced with stainless steel for basic installation 70,-
IS4 Non-return valve for fresh-water connection class HD according DIN EN 1717 85,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
SEF-10/108 Separate tank fill for UX and UXT
Supply water should be soft and warm (50 - 60°C)
on request
SEF-10/112 Integrated drain heat recovery
Alternatively with 15 or 9 kW booster heater (specify 15 kW for high capacity
throughput – 9 kW may allow reduced total loading
3.270,-
SEF-10/116 Integrated exhaust heat recovery and
Hood System VAPOSTOP
2.940,-
ML71620 Rack assortment UXT/UPT: base rack 323741, universal insert 323753, cutlery
rack C-01-07
870,-
ML71656 Rack assortment I UXT/UPT: 1 base rack UXT 323741 345,-
323741 Basic rack 1,240 x 700 mm, for UXT/UPT Models 680,-
323753 Insert 568 x 665 mm
suitable for plates, bowls, sheets, etc.
145,-
323637 Insert 568 x 625 mm, for 8 large sheets, distance between rows: 5.9 cm 120,-
UXT - PROFI UTENSIL WASHER, EXTRA WIDE
For best wash results, we recommend the HOBART chemical range HYLINE and the HOBART water
treatment systems HYDROLINE.
1.4 - 8 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• Extra capacity by side wash
system: capacity up to 8 GN-trays
1/1 or 5 EN2 container
• Detergent direct spraying system:
system soaks the wash ware following
the detergent pre-washing cycle
and softens even the most severely
encrusted food residues what reduces
the need for wash ware pre-soaking
and pre-washing
• Steam washing: significantly less
manual pre-cleaning and second runs
by intensive wash cycles with steam
injection
• POWER-PLUS Washing: high-
pressure washing to wash heavily
soiled wash items
• ROTOR-X Wash System: separate
rotating upper and lower 4-spoke
wash arms deliver dynamic wash
power
• ACCURINSE Rinse System:
constant rinse, independent of on-site
pressure
• Filter position sensor: prevents
operation without tank strainer
• SMARTRONIC Single-button
Control: colour coded status
indication and remaining time indicator
• VAPOSTOP Door System (optional):
prevents vapour to escape from
machine when door is opened
• The optional E-SAVE Drain Heat
Recovery transfers heat from hot
drain water to the fresh-water supply,
reducing boiler power consumption
and saving up to 12.9 kW/h
• GENIUS-X² Fine Filter System:
advanced filter system with pre-
wash function reduces detergent
consumption up to 35%
• Loading height L: above-average
loading height of 860 mm
• The optional exhaust heat recovery
with integrated Door System
VAPOSTOP uses steam to heat fresh
feed water and reduces the amount of
power needed to reach the final rinse
temperature, savingup to 7.8 kW/h
• Hygiene Programme: for removal of
calcium carbonate and other deposits
from wash chamber
UPT - PREMAX UTENSIL WASHER, EXTRA WIDE
TECHNICAL DATA
Cycle times* 150 / 280 / 420 sec. and special cycles
Water consumption 14 l/rackTank capacity 130 lTank heating 6 kWPower supply 400 / 50 / 3NBooster loadingStandard 18 kWTotal loadingStandard 24.5 kW / 3 x 50 AWash pump 2 x 2.7 kWRack size 1,240 x 700 mmLoading height 860 mmNoise level 67 dB (A)Weight (gross / net) 391 / 371 kg
DIMENSIONAL DRAWINGCONNECTIONS
2,000 mm | R 3/4''Flow pressure 0.5 - 10 barMax. supply water temperature
60 °C
5 l/min1.800 mm
Supply hose for2.500 mm2.500 mm
*Thermostop guarantees required temperatures with cold water connection, the actual cycle times extend accordingly.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water
softener or an external water softener of the product line HYDROLINE PROTECT.
1.4 - 9EFFECTIVE: 01. January 2015
BASIC MODEL
• Front door utensil washer
• Useable inside dimensions w x d x h: 1110x773x825mm
• Nominal capacity up to 24 cycles/h
• 5 automatic programmes: short, steam washing,
detergent direct spraying, permanent, hygiene
• Double walled housing
• Strainer soil sensor
• Refill signal (detergent / rinse aid)
• Self-cleaning programme
• Separate tank fill (can be deactivated)
• Ready to install - completely equipped: fill / drain hose,
electrical cable, detergent dispenser, rinse aid dispenser,
rinse pump, drain pump, back-flow preventer, tank heating,
separate tank fill (can be deactivated)
• Tank, frame, wash / rinse arms and panels are stainless
steel 1.4301
ORDER NO. DESCRIPTION €
UPT-10 Basic model
Please note: Racks need to be ordered seperately
26.045,-
SD-H High performance double cartridge softener 1.840,-
IS1 Hose, 1,500 mm, 3/4", DN15, reinforced with stainless steel for basic installation 70,-
IS4 Non-return valve for fresh-water connection class HD according DIN EN 1717 85,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
SEF-10/112 Integrated drain heat recovery 3.270,-
SEF-10/116 Integrated exhaust heat recovery and
Hood System VAPOSTOP
2.940,-
ML71620 Rack assortment UXT/UPT: base rack 323741, universal insert 323753, cutlery
rack C-01-07
870,-
ML71655 Rack assortment UXT/UPT: base rack 323741, insert 323637 for 8 large sheets,
cutlery rack C-01-07
845,-
ML71656 Rack assortment I UXT/UPT: 1 base rack UXT 323741 345,-
323741 Basic rack 1,240 x 700 mm, for UXT/UPT Models 680,-
323637 Insert 568 x 625 mm, for 8 large sheets, distance between rows: 5.9 cm 120,-
323753 Insert 568 x 665 mm
suitable for plates, bowls, sheets, etc.
145,-
UPT - PREMAX UTENSIL WASHER, EXTRA WIDE
For best wash results, we recommend the HOBART chemical range HYLINE and the HOBART water
treatment systems HYDROLINE.
1.4 - 10 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• POWER-PLUS Washing: high-
pressure washing to wash heavily
soiled wash items
• ROTOR-X Wash System: separate
rotating upper and lower 4-spoke
wash arms deliver dynamic wash
power
• ACCURINSE Rinse System:
constant rinse, independent of on-site
pressure
• Filter position sensor: prevents
operation without tank strainer
• SMARTRONIC Single-button
Control: colour coded status
indication and remaining time indicator
• Permanent wash programme:
due to a longer cycle time even
heavily soiled wash items are getting
perfectly clean
• The optional E-SAVE Drain Heat
Recovery transfers heat from hot
drain water to the fresh-water supply,
reducing boiler power consumption
and saving up to 12.9 kW/h
• Exhaust energy storage: the fully
enclosed 4-sided hood keeps steam
and energy inside the system: energy
savingup to 5 kW/h; less humidity in
the kitchen area and better hygienic
conditions
• GENIUS-X² Fine Filter System:
advanced filter system with pre-
wash function reduces detergent
consumption up to 35%
• Hygiene Programme: for removal of
calcium carbonate and other deposits
from wash chamber
UXTH - PROFI HOOD-TYPE UTENSIL WASHER
TECHNICAL DATA
Cycle times* 120 / 240 / 360 sec. and special cycles
Water consumption 8 l/rackTank capacity 130 lTank heating 6 kWPower supply 400 / 50 / 3NBooster loadingStandard 15 kWAlternative 9 kWTotal loadingStandard 21.6 kW / 3 x 50 AAlternative 15.7 kW | 3 x 35 AWash pump 2 x 2.7 kW | 2 x
1,300 l/minRack size 1,240 x 700 mmLoading height 620 mmNoise level 68 dB (A)Weight (gross / net) 399 / 379 kg
DIMENSIONAL DRAWING
474
* bei Abwasserwärmerückgewinnung
83
OPTIONAL* OPTIONAL*
2400
620
860
1732
936
13801447
8201447
150
936 5
902
CONNECTIONS
2,000 mm | R 3/4''Flow pressure 0.5 - 10 barMax. supply water temperature
60 °C
5 l/min1.800 mm
Supply hose for2.500 mm2.500 mm
*Thermostop guarantees required temperatures with cold water connection, the actual cycle times extend accordingly.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water
softener or an external water softener of the product line HYDROLINE PROTECT.
1.4 - 11EFFECTIVE: 01. January 2015
BASIC MODEL
• Hood-type utensil washer
• Useable inside dimensions w x d x h: 1320 x 735 x 600
mm
• Nominal capacity up to 30 cycles/h
• 5 automatic cycles: short, standard, intensive, permanent,
hygiene
• Double walled housing
• Multi-Setting: booster capacity may be reduced from 15
kW to 9 kW if connected with hot water
• Strainer soil sensor
• Refill signal (detergent / rinse aid)
• Self-cleaning programme
• Ready to install - completely equipped: fill / drain hose,
electrical cable, detergent dispenser, rinse aid dispenser,
rinse pump, drain pump, back-flow preventer, tank heating
• Tank, frame, wash / rinse arms and penals are stainless
steel 1.4301
ORDER NO. DESCRIPTION €
UXTH-10N Basic model
Please note: Racks need to be ordered seperately
22.370,-
SD-H High performance double cartridge softener 1.840,-
IS1 Hose, 1,500 mm, 3/4", DN15, reinforced with stainless steel for basic installation 70,-
IS4 Non-return valve for fresh-water connection class HD according DIN EN 1717 85,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
SEF-10/092 Separate tank fill for UXTH and UXTLH
Supply water should be soft and warm (50 - 60°C)
on request
SEF-10/102 Back panel
stainless steel 1.4301
on request
SEF-10/113 Integrated drain heat recovery
Alternatively with 9 or 15 kW booster heater (specify 15 kW for high
capacity throughput – 9 kW may allow reduced total loading)
3.270,-
ML71619 Rack assortment UXTH: base rack 326102-1, universal insert 323753, cutlery rack
C-01-07
1.590,-
326102-1 Roller rack 1,240 x 700 mm, for UXT(L)H Models 1.400,-
323637 Insert 568 x 625 mm, for 8 large sheets, distance between rows: 5.9 cm 120,-
323753 Insert 568 x 665 mm
suitable for plates, bowls, sheets, etc.
145,-
UXTH - PROFI HOOD-TYPE UTENSIL WASHER
For best wash results, we recommend the HOBART chemical range HYLINE and the HOBART water
treatment systems HYDROLINE.
1.4 - 12 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• Loading height L: above-average
loading height of 880 mm (with rack
850 mm)
• POWER-PLUS Washing: high-
pressure washing to wash heavily
soiled wash items
• ROTOR-X Wash System: separate
rotating upper and lower 4-spoke
wash arms deliver dynamic wash
power
• ACCURINSE Rinse System:
constant rinse, independent of on-site
pressure
• Filter position sensor: prevents
operation without tank strainer
• SMARTRONIC Single-button
Control: colour coded status
indication and remaining time indicator
• Permanent wash programme:
due to a longer cycle time even
heavily soiled wash items are getting
perfectly clean
• The optional E-SAVE Drain Heat
Recovery transfers heat from hot
drain water to the fresh-water supply,
reducing boiler power consumption
and saving up to 12.9 kW/h
• Exhaust energy storage: the
fully enclosed 4-sided hood keeps
steam and energy inside the system:
energy savingup to 5 kW/h; less
humidity in the kitchen area and better
hygienicconditions
• GENIUS-X² Fine Filter System:
advanced filter system with pre-
wash function reduces detergent
consumption up to 35%
• Hygiene Programme: for removal of
calcium carbonate and other deposits
from wash chamber
UXTLH - PROFI HOOD-TYPE UTENSIL WASHER, EXTRA HIGH
TECHNICAL DATA
Cycle times* 120 / 240 / 360 sec. and special cycles
Water consumption 8 l/rackTank capacity 130 lTank heating 6 kWPower supply 400 / 50 / 3NBooster loadingStandard 15 kWAlternative 9 kWTotal loadingStandard 21.6 kW / 3 x 50 AAlternative 15.7 kW | 3 x 35 AWash pump 2 x 2.7 kW | 2 x
1,300 l/minRack size 1,240 x 700 mmLoading height 880 mmNoise level 68 dB (A)Weight (gross / net) 452 / 432 kg
DIMENSIONAL DRAWING
2900
880
860
1984
820902
936
14471380
150
1447 936
474
* bei Abwasserwärmerückgewinnung
83
OPTIONAL* OPTIONAL*
5
CONNECTIONS
2,000 mm | R 3/4''Flow pressure 0.5 - 10 barMax. supply water temperature
60 °C
5 l/min1.800 mm
Supply hose for2.500 mm2.500 mm
*Thermostop guarantees required temperatures with cold water connection, the actual cycle times extend accordingly.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water
softener or an external water softener of the product line HYDROLINE PROTECT.
1.4 - 13EFFECTIVE: 01. January 2015
BASIC MODEL
• Hood-type utensil washer
• Useable inside dimensions w x d x h: 1320 x 735 x 850
mm
• Nominal capacity up to 30 cycles/h
• 5 automatic cycles: short, standard, intensive, permanent,
hygiene
• Double walled housing
• Multi-Setting: booster capacity may be reduced from 15
kW to 9 kW if connected with hot water
• Strainer soil sensor
• Refill signal (detergent / rinse aid)
• Self-cleaning programme
• Ready to install - completely equipped: fill / drain hose,
electrical cable, detergent dispenser, rinse aid dispenser,
rinse pump, drain pump, back-flow preventer, tank heating
• Tank, frame, wash / rinse arms and panels are stainless
steel 1.4301
ORDER NO. DESCRIPTION €
UXTLH-10N Basic model
Please note: Racks need to be ordered seperately
22.865,-
SD-H High performance double cartridge softener 1.840,-
IS1 Hose, 1,500 mm, 3/4", DN15, reinforced with stainless steel for basic installation 70,-
IS4 Non-return valve for fresh-water connection class HD according DIN EN 1717 85,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
SEF-10/092 Separate tank fill for UXTH and UXTLH
Supply water should be soft and warm (50 - 60°C)
on request
SEF-10/103 Back panel
stainless steel 18/9
on request
SEF-10/113 Integrated drain heat recovery
Alternatively with 9 or 15 kW booster heater (specify 15 kW for high
capacity throughput – 9 kW may allow reduced total loading)
3.270,-
ML71619 Rack assortment UXTH: base rack 326102-1, universal insert 323753, cutlery rack
C-01-07
1.590,-
326102-1 Roller rack 1,240 x 700 mm, for UXT(L)H Models 1.400,-
323637 Insert 568 x 625 mm, for 8 large sheets, distance between rows: 5.9 cm 120,-
323753 Insert 568 x 665 mm
suitable for plates, bowls, sheets, etc.
145,-
UXTLH - PROFI HOOD-TYPE UTENSIL WASHER, EXTRA HIGH
For best wash results, we recommend the HOBART chemical range HYLINE and the HOBART water
treatment systems HYDROLINE.
1.4 - 15EFFECTIVE: 01. January 2015
EXIT TABLE WITHOUT SINK FOR UXT(L)H
MODEL DESCRIPTION
• Exit table without sink
• 903 mm wide
• With splash protection panel 360 mm high (integr. in profile) over whole length, closed on both sides
• With rack guiding rails
• Table sheet 1.5 mm stainless steel 1.4301
• Stainless steel base with height-adjustable plastic bolts
• Sloped towards machine
• Standard length 1,450 mm
Please note: For selection of table position "left" or "right" the front view to the machine is decisive
ORDER NO.
Table position
left right €
with open base ML61925 ML61924 2.115,-
with grid, stainless steel ML62844 ML62843 2.330,-
with board, stainless steel ML61945 ML61944 2.260,-
1.4 - 16 EFFECTIVE: 01. January 2015
MODEL DESCRIPTION
• Entry table with sink 600 x 600 x 300 mm
• 903 mm wide
• With splash protection panel 360 mm high (integr. in profile) over whole length, closed on both sides
• With rack guiding rails
• Table sheet 1.5 mm stainless steel 1.4301
• Stainless steel base with height-adjustable plastic bolts
• Sloped towards machine
• Table is prepared with holes for connecting the overhead spray with tap and mixing valve
• Standard length 1,450 mm
Please note: for selection of table position "left" or "right" the front view to the machine is decisive
ORDER NO.
Table position
left right €
with open base ML61928 ML61927 3.015,-
with grid, stainless steel ML62846 ML62845 3.245,-
with board, stainless steel ML61947 ML61946 3.100,-
OPTIONAL EQUIPMENT
Standpipe 250 mm for sink 168349-2 40,-
Overhead spray with tap and mixing valve
special robust version and wall mounted
734715 870,-
Overhead spray with tap and mixing valve
• for operation of tap or shower
• for connection to hot and cold water 1/2" each
605237 610,-
ENTRY TABLE WITH SINK 600 X 600 MM FOR UXT(L)H
1.4 - 17EFFECTIVE: 01. January 2015
ENTRY TABLE WITH SINK 800 X 600 MM FOR UXT(L)H
MODEL DESCRIPTION
• Entry table with sink 800 x 600 x 300 mm
• 903 mm wide
• With splash protection panel 360 mm high (integr. in profile) over whole length, closed on both sides
• With rack guiding rails
• Table sheet 1.5 mm stainless steel 1.4301
• Stainless steel base with height-adjustable plastic bolts
• Sloped towards machine
• Table is prepared with holes for connecting the overhead spray with tap and mixing valve
• Standard length 1,450 mm
Please note: For selection of table position "left" or "right" the front view to the machine is decisive
ORDER NO.
Table position
left right €
with open base ML62217 ML62215 4.235,-
with grid, stainless steel ML62848 ML62847 4.615,-
with board, stainless steel ML62218 ML62216 4.335,-
OPTIONAL EQUIPMENT
Standpipe 250 mm for sink 168349-2 40,-
Overhead spray with tap and mixing valve
special robust version and wall mounted
734715 870,-
Overhead spray with tap and mixing valve
• for operation of tap or shower
• for connection to hot and cold water 1/2" each
605237 610,-
1.4 - 18 EFFECTIVE: 01. January 2015
FRONT TABLE FOR UXT(L)H
• Front table version
• 1382 x 820 mm
• rollable (4 rolls, 2 fixable)
• easy to fix at the machine with
optional lift mechanism
• table sheet 1.5mm stainless steel
1.4301
• sloped towards machine
• adjusted guides
Please note:
• For working direction left/right please
order external control panel SEF-
10/097
BASIC MODEL
ORDER NO. DESCRIPTION €
01-510458-1 Front table version
including:
• ML70288 (front table)
• SEF-10/106 (modification for connection to machine)
• ML71631 (rack assortment)
– 2 specific base racks (1 for front 326174-1, 1 for straight operation 326228-1)
– 2 rack inserts (323753, C-01-07)
Attention: "real" corner operation not possible
10.495,-
01-510459-1 as above, alternatively front table on rollers and with lever lock out 12.025,-
1.4 - 20 EFFECTIVE: 01. January 2015
ORDER NO. DESCRIPTION €
Racks for UX-Models
01-510508-1 Basic rack 600 x 760 mm, for UX/UP Models 245,-
323741 Basic rack 1,240 x 700 mm, for UXT/UPT Models 680,-
326102-1 Roller rack 1,240 x 700 mm, for UXT(L)H Models 1.400,-
326174-1 Roller rack for corner operation for front table 2.155,-
Rack inserts
323753 Insert 568 x 665 mm
suitable for plates, bowls, sheets, etc.
145,-
323637 Insert 568 x 625 mm, for 8 large sheets, distance between rows:
5.9 cm
120,-
323638 Insert 568 x 372 x 490 mm (l x w x h)
for 6 pipe bags
80,-
323641 Insert 612 x 240 x 250 mm (l x w x h)
for 36 large cake plates
130,-
323796 Wire grid insert 600 x 700 mm, alternatively to basic rack,
perfect for washing 2 boxes on one level
120,-
323777 Cover for light washware 665 x 568 mm
stainless steel frame, connected with chains
380,-
774847-1 Insert 495 x 430 mm
for 5 isolating trays up to max. 70 mm thickness of the trays,
without base track
165,-
RACKS AND INSERTS
1.4 - 21EFFECTIVE: 01. January 2015
RACK ASSORTMENTS
ORDER NO. DESCRIPTION €
Rack assortments
ML71600 Rack assortment UX/UP: base rack 01-510508-1, rack insert
323753, cutlery rack C-01-07
435,-
ML71601 Rack assortment UX/UP: base rack 01-510508-1, insert for 8
large bakery sheets 323637
365,-
ML71654 Rack assortment UX/UP: base rack 01-510508-1, insert for 8
large bakery sheets 323637, cutlery rack C-01-07
410,-
ML71620 Rack assortment UXT/UPT: base rack 323741, universal insert
323753, cutlery rack C-01-07
870,-
ML71655 Rack assortment UXT/UPT: base rack 323741, insert 323637
for 8 large sheets, cutlery rack C-01-07
845,-
ML71619 Rack assortment UXTH: base rack 326102-1, universal insert
323753, cutlery rack C-01-07
1.590,-
1.5 Water Treatment and Chemicals
Water Treatment HYDROLINE
Water Softener HYDROLINE PROTECT SE-H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Water Softener HYDROLINE PROTECT SD-H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Partial Demineralisation HYDROLINE STAR PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Full Demineralisation HYDROLINE STAR EXTRA FD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Demineralisation for Cooking HYDROLINE STEAM CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Reverse Osmosis HYDROLINE PURE RO-I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Reverse Osmosis HYDROLINE PURE RO-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Reverse Osmosis HYDROLINE PURE RO-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Water testing instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Installation HYDROLINE RO-C / RO-I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Chemistry HYLINE
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Chemistry HYLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
1.5 - 2 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• Protects machine against limescale
- extends maintenance intervals and
service life
• Economic low cost version
• Integrated blending system in control
head for adjustment to local water
hardness
• Sturdy control head
• Optimises the effectiveness of
detergents
• Automatic regeneration of water
softening system
• Programmable regeneration times
• Operates with cold or warm water up
to 65°C
• Compact dimensions, including rollers
for flexible installation
WATER SOFTENER HYDROLINE PROTECT SE-H
TECHNICAL DATA
Power supply 230 / 50 / 1Weight (gross / net) 14 / 12 kgMaximum hardness 30 °dHCapacity salt container 10 kgRegeneration time 30 minSalt consumption per regeneration
0.5 kg
Supply capacityContinuously 10 l/minMaximum 15 l/min
DIMENSIONAL DRAWINGCONNECTIONS
Power Cord 230 V 1.500 mmSupply connection R 3/4''Outlet connection R 3/4''Flow pressure 3 - 6 barMax. supply water temperature
65 °C
The water treatment system must be connected to the drinking water supply system by means of a backflow preventer
conforming to DIN EN 1717 (see „Optional Equipment“).
Depending on local water quality, it might be advisable to install an upstream fine filter.
Installation might require additional armoured hoses (see „Optional Equipment“).
An overflow hose for the tank can be installed on-site.
1.5 - 3EFFECTIVE: 01. January 2015
BASIC MODEL
• Quality ion exchangers reduce the water hardness by
substituting calcium and magnesium ions contained in the
water with sodium ions
• The water filter system consists of a corrosion-proof
pressure vessel containing the filter material
• Depending on the water pressure on-site, filtration reduces
the pressure to downstream machines by a minimum of
0.5 bar
• Vessel made of plastic
ORDER NO. DESCRIPTION €
SE-H Economy Single Cartridge Softener with integrated time control 1.050,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
IS1 Hose, 1,500 mm, 3/4", DN15, reinforced with stainless steel for basic installation 70,-
IS2 Comprehensive Installation Kit for machine connection, including
• hose 3/4“, 1.500 mm
• cut-off valve
• manometer
• non-return valve
310,-
IS3 Bypass additional to IS2 for regulation of water hardness of outcoming water
• hose 3/4“, 1,500 mm
• regulation valve
425,-
IS4 Non-return valve for fresh-water connection class HD according DIN EN 1717 85,-
WATER SOFTENER HYDROLINE PROTECT SE-H
1.5 - 4 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• Protects machine against limescale
- extends maintenance intervals and
service life
• Optimises the effectiveness of
detergents
• The system is automatically
regenerated while in normal operation
- supplying soft water 24 hours a day
• No disruption for regeneration thanks
to double-chamber system
• Operates with cold or warm water up
to 65°C
• Compact dimensions, including rollers
for flexible installation
• Does not require electrical supply
WATER SOFTENER HYDROLINE PROTECT SD-H
TECHNICAL DATA
Weight (gross / net) 21 / 19 kgMaximum hardness 30 °dHCapacity salt container 20 kgSalt consumption per regeneration
0.5 kg
Supply capacityContinuously 20 l/minMaximum 25 l/min
DIMENSIONAL DRAWINGCONNECTIONS
Supply connection R 3/4''Outlet connection R 3/4''Flow pressure 3 - 7 barMax. supply water temperature
65 °C
The water treatment system must be connected to the drinking water supply system by means of a backflow preventer
conforming to DIN EN 1717 (see „Optional Equipment“).
Depending on local water quality, it might be advisable to install an upstream fine filter.
Installation might require additional armoured hoses (see „Optional Equipment“).
An overflow hose for the tank can be installed on-site.
1.5 - 5EFFECTIVE: 01. January 2015
BASIC MODEL
• The system is supplied with a built-in hardness setting
disc 5 for up to 19°dH. Other hardness grade discs are
available on request
• Quality ion exchangers reduce the water hardness by
substituting calcium and magnesium ions contained in the
water with sodium ions
• The water filter system consists of a corrosion-proof
pressure vessel containing the filter material
• Depending on the water pressure on-site, filtration reduces
the pressure to downstream machines by a minimum of
0.5 bar
• Vessel made of plastic
ORDER NO. DESCRIPTION €
SD-H High performance double cartridge softener 1.840,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
608636-1 Hardness setting disc up to 4 °dH 20,-
608636-2 Hardness setting disc up to 8 °dH 20,-
608636-3 Hardness setting disc up to 11 °dH 20,-
608636-4 Hardness setting disc up to 15 °dH 20,-
608636-5 Hardness setting disc up to 19 °dH 20,-
608636-6 Hardness setting disc up to 23 °dH 20,-
608636-7 Hardness setting disc up to 26 °dH 20,-
608636-8 Hardness setting disc up to 30 °dH 20,-
IS1 Hose, 1,500 mm, 3/4", DN15, reinforced with stainless steel for basic installation 70,-
IS2 Comprehensive Installation Kit for machine connection, including
• hose 3/4“, 1.500 mm
• cut-off valve
• manometer
• non-return valve
310,-
IS3 Bypass additional to IS2 for regulation of water hardness of outcoming water
• hose 3/4“, 1,500 mm
• regulation valve
425,-
IS4 Non-return valve for fresh-water connection class HD according DIN EN 1717 85,-
WATER SOFTENER HYDROLINE PROTECT SD-H
1.5 - 6 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• Prevents salt and limescale stains on
dishes, glassware and cutlery in areas
where carbon hardness is high
• Protects machine against limescale
deposits
• Optimises the effectiveness of
detergents - the dosing rate can be
reduced
• Easy, tool-free exchange of cartridge
• Inlet and outlet hoses need not be
disconnected to change the cartridge
• Designed for vertical or horizontal
installation
• Pressure vessel lid equipped with built-
in back flow preventer according to
DIN EN 1717
• Does not require electrical supply
• High capacity
• Compact dimensions
• For cold and warm water
• Low investment cost
PARTIAL DEMINERALISATION HYDROLINE STAR PD
TECHNICAL DATA
Weight (gross / net) 24 / 18 kgMaximum hardness 35 °dHSupply capacity 13.000 l at 10° dHContinuously 5 l/min
DIMENSIONAL DRAWINGCONNECTIONS
Supply connection R 3/4''Outlet connection R 3/4''Flow pressure 2 - 6 barMax. supply water temperature
60 °C
Attention: the bending radius of the inlet and outlet hoses is approx. 130 mm - depending on the installation orientation
and operating space, this must be considered in addition to the dimensions of the complete system. Optional 90°
connection pieces (Order No. 895440-8) may help for tight installations.
1.5 - 7EFFECTIVE: 01. January 2015
BASIC MODEL
• For partial demineralisation, the calcium and magnesium
ions (water hardening ions) contained in the water are
substituted with hydrogen ions
• The sodium ion (table salt) concentration in the water is
not increased in the process
• Not recommended for operation with upstream water
softening system
• Not suitable for use in conjunction with dishwasher with
integrated water softening system
• The water filter system consists of a corrosion-proof
pressure vessel containing the filter material
ORDER NO. DESCRIPTION €
STAR PD Partial Demineralisation / De-carbonisation
complete system incl. cartridge and housing
1.220,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
895440-3 Replacement Cartridge 250,-
895440-5 Hose 2,000 mm, 3/4‘‘, DN13, for fresh-water connection,
reinforced with stainless steel, incl. cut-off valve
65,-
895440-8 90° connection piece 3/4''
for more compact connection of hoses
35,-
PARTIAL DEMINERALISATION HYDROLINE STAR PD
1.5 - 8 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• Prevents salt and limescale stains on
dishes, glassware and cutlery in areas
where carbon hardness is high
• Protects machine against limescale
deposits
• Optimises the effectiveness of
detergents - the dosing rate can be
reduced
• Easy, tool-free exchange of cartridge
• Inlet and outlet hoses need not be
disconnected to change the cartridge
• Designed for vertical and horizontal
installation
• Pressure vessel lid equipped with
built-in preventer according to DIN EN
1717
• Does not require electrical supply
• High capacity
• Compact dimensions
• For cold and warm water
• Low investment cost
FULL DEMINERALISATION HYDROLINE STAR EXTRA FD
TECHNICAL DATA
Weight (gross / net) 24 / 18 kgMaximum hardness 35 °dHSupply capacity 5.400 l at 10°dHContinuously 5 l/min
DIMENSIONAL DRAWINGCONNECTIONS
Supply connection R 3/4''Outlet connection R 3/4''Flow pressure 2 - 6 barMax. supply water temperature
60 °C
Attention: the bending radius of the inlet and outlet hoses is approx. 130 mm - depending on the installation orientation
and operating space, this must be considered in addition to the dimensions of the complete system. Optional 90°
connection pieces (Order No. 895440-8) may help for tight installations.
1.5 - 9EFFECTIVE: 01. January 2015
BASIC MODEL
• For full demineralisation, the calcium and magnesium ions
(water hardening ions) as well as the sodium ions (table
salt) contained in the water are substituted
• Not recommended for operation with upstream water
softening system
• Not suitable for use in conjunction with dishwasher with
integrated water softening system
• The water filter system consists of a corrosion-proof
pressure vessel containing the filter material
ORDER NO. DESCRIPTION €
STAR EXTRA FD Full Demineralisation for glasswashing
complete system incl. cartridge and housing
1.240,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
895440-4 Replacement Cartridge 250,-
895440-5 Hose 2,000 mm, 3/4‘‘, DN13, for fresh-water connection,
reinforced with stainless steel, incl. cut-off valve
65,-
895440-8 90° connection piece 3/4''
for more compact connection of hoses
35,-
FULL DEMINERALISATION HYDROLINE STAR EXTRA FD
1.5 - 10 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• Protects utensils for steaming and
baking against limescale
• Prevents blockage by limescale of
small nozzles in food steamers and
ovens
• Prevents corrosion on glass panes
• Easy, tool-free exchange of cartridge
• Inlet and outlet hoses need not be
disconnected to change the cartridge
• Filter head with digital indicator for
remaining cartridge capacity
• Designed for vertical or horizontal
installation
• Pressure vessel lid equipped with
built-in preventer according to DIN EN
1717
• Do not require electrical supply
• High capacity
• Compact dimensions
• For cold and warm water
• Low investment cost
DEMINERALISATION FOR COOKING HYDROLINE STEAM CD
TECHNICAL DATA
Weight (gross / net) 24 / 18 kgMaximum hardness 35 °dHSupply capacity 10.800 l at 10°dHContinuously 1,7 l/min
DIMENSIONAL DRAWINGCONNECTIONS
Supply connection R 3/4''Outlet connection R 3/4''Flow pressure 2 - 6 barMax. supply water temperature
30 °C
Attention: the bending radius of the inlet and outlet hoses is approx. 130 mm - depending on the installation orientation
and operating space, this must be considered in addition to the dimensions of the complete system. Optional 90°
connection pieces (Order No. 895440-8) may help for tight installations.
1.5 - 11EFFECTIVE: 01. January 2015
BASIC MODEL
• For partial demineralisation, the calcium and magnesium
ions (water hardening ions) contained in the water are
substituted with hydrogen ions
• The sodium ion (table salt) concentration in the water is
not increased in the process
• Not recommended for operation with upstream water
softening system
• Not suitable for use in conjunction with dishwasher with
integrated water softening system
• The water filter system consists of a corrosion-proof
pressure vessel containing the filter material
ORDER NO. DESCRIPTION €
STEAM CD Cooking De-carbonisation
complete system incl. cartridge and housing
1.345,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
895440-5 Hose 2,000 mm, 3/4‘‘, DN13, for fresh-water connection,
reinforced with stainless steel, incl. cut-off valve
65,-
895440-6 Hose with bended connection on one side 2,000 mm, 3/4'', DN13, for connection
to cooking equipment
reinforced with stainless steel
65,-
895440-8 90° connection piece 3/4''
for more compact connection of hoses
35,-
895480-11 Replacement Cartridge 320,-
DEMINERALISATION FOR COOKING HYDROLINE STEAM CD
1.5 - 12 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• Compact design: suitable for
installation below, on top of, behind,
or beside dishwasher.
• Base version increasing total unit
height by only 120 mm
• Continuous treatment system
providing demineralised water for top-
quality wash results
• Prevents salt and limescale stains on
dishes, glassware and cutlery in areas
where carbon hardness is high
• No need for manual polishing of
glasses and cutlery
• Protects machine against limescale
deposits
• Optimises the effectiveness of
detergents - the dosing rate can be
reduced
• Unrivalled capacity at very low
operating costs
• Integral design with compact
dimensions
REVERSE OSMOSIS HYDROLINE PURE RO-I
TECHNICAL DATA
Power supply 230 / 50 / 1Total loadingStandard 0.2 kW / 16 AWeight (gross / net) 22 / 20 kg
60 %Maximum hardness 35 °dHMax. conductivity supply water
1.200 µS/cm
Mineral retention rate 98 %Supply capacity recom.180 l/dayMaximum 1,5 l/min at 15°C
DIMENSIONAL DRAWINGCONNECTIONS
Power Cord 230 V 1.500 mmSupply connection R 3/4''Outlet connection R 3/4''Flow pressure 1 - 6 barMax. supply water temperature
35 °C
The water treatment system must be connected to the drinking water supply system by means of a backflow preventer
conforming to DIN EN 1717. The outlet of the reverse osmosis system must be equipped with a backflow preventer
conforming to DIN EN 1717 to ensure that dirty water from the dishwasher does not enter the treatment system. From
water hardness grade 2 (medium), we recommend installing an upstream water softening system to prevent blockage
of the membrane. Hard water reduces the permeate output rate and shortens the service life of the reverse osmosis
system.
677*
1.5 - 13EFFECTIVE: 01. January 2015
BASIC MODEL
• The raw mains water enters an enclosed system and is
forced at high pressure through a special extremely fine
membrane
• Salts and minerals are thereby completely removed from
the water. The downstream dishwasher is thus supplied by
perfectly clean water
• Easy access to membrane and filters thanks to drawer
module design of reverse osmosis system
• Not suitable for use in conjunction with dishwasher with
integrated water softening system
ORDER NO. DESCRIPTION €
RO-I 400 Reverse osmosis (drawer module) for GC / GCP, integrated in 120 mm high base 2.155,-
RO-I 500 Reverse osmosis (drawer module) for GX / GP / FX / FP
integrated in 120 mm high base
2.155,-
RO-I V Reverse osmosis - free standing vertical version 2.155,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
01-294220-001 Non-return valve kit class BA for RO systems
for fresh-water and drain connection according DIN EN 1717
including dirt collector and hoses
475,-
01-294225-101 Carbon pre-filter cartridge for regularly exchange
Capacity: 14,000 litre / 6 month
50,-
01-294217-001 25 litre buffer tank to increase the capacity and to achieve a more even level of
purification
necessary for machines without rinse pressure pump
requires additional supply hose DN15 (e.g. IS1)
fixation to wall or floor
diameter ~245 mm
length ~475 mm
incl. T-connection piece
890,-
REVERSE OSMOSIS HYDROLINE PURE RO-I
1.5 - 14 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• High capacity / efficiency system
• Continuous treatment system
providing demineralised water for top-
quality wash results
• Prevents salt and limescale stains on
dishes, glassware and cutlery in areas
where carbon hardness is high
• No need for manual polishing of
glasses and cutlery
• Protects machine against limescale
deposits
• Optimises the effectiveness of
detergents - the dosing rate can be
reduced
• Unrivalled capacity at very low
operating costs
• Compact dimensions
REVERSE OSMOSIS HYDROLINE PURE RO-C
TECHNICAL DATA
Power supply 230 / 50 / 1Total loadingStandard 0.72 kW / 10AWeight (gross / net) 35 / 33 kg
70 %Maximum hardness 20 °dHMax. conductivity supply water
2.000 µS/cm
Mineral retention rate 98 %Supply capacity recom. 500 l/dayMaximum 5.2 l/min**
DIMENSIONAL DRAWINGCONNECTIONS
Power Cord 230 V 1.500 mmSupply connection R 3/4''Outlet connection R 3/4''Flow pressure 2 - 10 barMax. supply water temperature
30 °C
The water treatment system must be connected to the drinking water supply system by means of a backflow preventer
conforming to DIN EN 1717. The outlet of the reverse osmosis system must be equipped with a backflow preventer
conforming to DIN EN 1717 to ensure that dirty water from the dishwasher does not enter the treatment system. From
water hardness grade 2 (medium), we recommend installing an upstream water softening system to prevent blockage
of the membrane. Hard water reduces the permeate output rate and shortens the service life of the reverse osmosis
system.
** For higher capacities and continuous washing please use a buffer tank (see "Optional Equipment")
1.5 - 15EFFECTIVE: 01. January 2015
BASIC MODEL
• The raw mains water enters enclosed system and is
forced at high pressure through a special extremely fine
membrane
• Salts and minerals are thereby completely removed from
the water. The downstream dishwasher is thus supplied by
perfectly clean water
• If the total hardness of the mains water exceeds 10°dH,
we recommend installing an upstream HYDROLINE
PROTECT SD-H unit
• Integrated activated carbon filter and sediment filter
remove rough particles to protect the membrane
• Not suitable for use in conjunction with dishwasher with
integrated water softening system
ORDER NO. DESCRIPTION €
RO-C Compact free standing reverse osmosis 5.780,-
OPTIONAL EQUIPMENT
ORDER NO. DESCRIPTION €
01-294220-001 Non-return valve kit class BA for RO systems
for fresh-water and drain connection according DIN EN 1717
including dirt collector and hoses
475,-
01-294214-001 Bypass for easier service 395,-
01-294217-001 25 litre buffer tank to increase the capacity and to achieve a more even level of
purification
necessary for machines without rinse pressure pump
requires additional supply hose DN15 (e.g. IS1)
fixation to wall or floor
diameter ~245 mm
length ~475 mm
incl. T-connection piece
890,-
01-294218-001 140 litre buffer tank to increase the capacity and to achieve a more even level of
purification
dimensions: 350 x 630 x 700 mm
includes level control and pressure pump kit
3.765,-
01-294214-201 Carbon pre-filter cartridge for regularly exchange
Capacity: 10,000 litre / 6 month (Please order 2 of them per exchange of the filter)
65,-
REVERSE OSMOSIS HYDROLINE PURE RO-C
1.5 - 16 EFFECTIVE: 01. January 2015
PRODUCT ADVANTAGES
• High capacity / efficiency system
• Continuous treatment system
providing demineralised water for top-
quality wash results
• Prevents salt and limescale stains on
dishes, glassware and cutlery in areas
where carbon hardness is high
• No need for manual polishing of
glasses and cutlery
• Protects machine against limescale
deposits
• Optimises the effectiveness of
detergents - the dosing rate can be
reduced
• Unrivalled capacity at very low
operating costs
• Compact dimensions
• Mixing valve included
REVERSE OSMOSIS HYDROLINE PURE RO-L
TECHNICAL DATA
Power supply 230 / 50 / 1Total loadingStandard 0.6Weight (gross / net) - / 42 kg
75 %Maximum hardness 25 °dHMax. conductivity supply water
2,000 µS/cm
Mineral retention rate 98 %Supply capacity 3,500 l / day | 280
l / hMaximum 4 l/min
DIMENSIONAL DRAWING
620 285
360
CONNECTIONS
Power Cord 230 V 5,000 mmSupply connection R 3/4''Outlet connection R 3/4''Flow pressure 1.5 - 7 barMax. supply water temperature
25 °C
1.5 - 17EFFECTIVE: 01. January 2015
BASIC MODEL
• For automatic rack-type and flight-type machines only
• The raw mains water enters enclosed system and is
forced at high pressure through a special extremely fine
membrane
• Salts and minerals are thereby completely removed from
the water. The downstream dishwasher is thus supplied by
perfectly clean water
• If the total hardness of the mains water exceeds 10°dH,
we recommend installing an upstream HYDROLINE
PROTECT SD-H unit
• Back-flow prevention not included
• At a chlorine concentration above 0.05 mg/l a carbon
filter on-site is required
• Inclusive housing
ORDER NO. DESCRIPTION €
RO-L28 + SEF-
13/111
Reverse osmosis for flight-type machines
(machine components are prepared for installation, but installation of RO-L must be
done by local service)
9.740,-
RO-L28 + SEF-
14/007 + 01-
534987-001
Reverse osmosis for rack-type machines with SMARTRONIC
(machine components are prepared for installation, but installation of RO-L must be
done by local service)
9.945,-
RO-L28 + SEF-
14/006 + 01-
534987-001
Reverse osmosis for rack-type machines with PROTRONIC
(machine components are prepared for installation, but installation of RO-L must be
done by local service)
10.970,-
REVERSE OSMOSIS HYDROLINE PURE RO-L
1.5 - 18 EFFECTIVE: 01. January 2015
ORDER NO. DESCRIPTION €
Water testing instruments
609927 pH-indicator stripes non-bleeding
to measure pH-value of raw water
RO-C: 4-10 pH
RO-I: max. 9.5 pH -> depending on the water hardness and pH-value
you have to choose the correct capillary of the RO-I systems
100 pcs
60,-
607236 Water hardness test
to measure raw water hardness
SE-H: max. 30°dH
SD-H: max. 30°dH
Cartridges: max 35°dH
RO-C: max. 20°dH
RO-I: max 35°dH -> depending on the water hardness and pH-value
you have to choose the correct capillary of the RO-I systems
2 x 15 ml
35,-
609909 Conductivity metre
to measure conductivity of raw water
RO-C: max. 2000 µS/cm
RO-I: max. 1200 µS/cm
530,-
WATER TESTING INSTRUMENTS
1.5 - 22 EFFECTIVE: 01. January 2015
ORDER NO. DESCRIPTION €
Detergent
HLG-10 Glass detergent:
Protects decor, prevents glass corrosion, excellent beer foam
stability, chlorine-free
suitable for use with soft water
12 kg
56,-
HLB-20 Bistro detergent:
Effective removal of tea and coffee residues, odour-free, chlorine-
free
suitalbe for use with soft water
12 kg
57,-
HLU-30 Universal detergent:
Outstanding bleaching effect, contains active chlorine
suitable for use with soft and medium hard water
12 kg
51,-
HLU-30K Universal detergent:
Outstanding bleaching effect, contains active chlorine
suitable for use with soft and medium hard water
24 kg
97,-
HLU-31 Universal detergent:
Excellent grease removal capacity, contains active chlorine
suitable for use with hard water
12 kg
56,-
HLU-32 Universal detergent:
Excellent starch removal capacity, chlorine-free
suitable for use with soft water
12 kg
51,-
CHEMISTRY HYLINE
Delivery terms: ex work Offenburg
Ordering of mixed pallets is possible. For order quantities of less than 1 pallet (60 x 12 kg canisters or 36 x 24 kg canisters) collection by the customer only. Minimum order
amount of 24 kg canisters = 4.
Transport regulations:
On the road: ADR regulations are effective = European Agreement concerning the International Carriage of Dangerous Goods by Road. Forwarder has to fulfill all transport
regulations according to ADR.
Sea-freight: IMO regulations -> 100 Euro additional costs for IMO declaration
Air-freight: IATA regulations -> 150 Euro additional costs for IATA declaration
For further information please get back to your HOBART contact person.
1.5 - 23EFFECTIVE: 01. January 2015
CHEMISTRY HYLINE
ORDER NO. DESCRIPTION €
HLA-40 Aluminium detergent:
Suitable for aluminium and stainless steel wash ware, excellent
grease and protein removal capacity, protects material, chlorine-
free
12 kg
56,-
Rinse aid
HLG-1000 Glass rinse aid:
High-concentration formulation for glasses, slightly acidic, protects
decor, fast drying, excellent beer foam stability
10 litre
53,-
HLU-3000 Universal rinse aid:
High-concentration formulation for all wash ware, neutral, fast
drying outstanding drip-off properties
10 litre
51,-
HLD-5000 Rinse aid for demineralised water:
High-concentration-formulation for all wash ware in combination with
a reverse osmosis or demineralisation cartridges, protects decor,
outstanding drip-off properties, spotless drying results
10 litre
57,-
Chemical Tablets
609731 Chemical Tablets INTENSIVE 12 boxes à 15 tabs 570,-
Delivery terms: ex work Offenburg
Ordering of mixed pallets is possible. For order quantities of less than 1 pallet (60 x 12 kg canisters or 36 x 24 kg canisters) collection by the customer only. Minimum order
amount of 24 kg canisters = 4.
Transport regulations:
On the road: ADR regulations are effective = European Agreement concerning the International Carriage of Dangerous Goods by Road. Forwarder has to fulfill all transport
regulations according to ADR.
Sea-freight: IMO regulations -> 100 Euro additional costs for IMO declaration
Air-freight: IATA regulations -> 150 Euro additional costs for IATA declaration
For further information please get back to your HOBART contact person.