Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet
To obtain a detailed Bulldog quote you must fill out the attached spec sheet. Please make every effort to fill out this form electronically and in “word” format. If you prefer to fill out this form by hand you may do so and fax it back to H&H at: 207-247-2755 or mail to:
Howe & Howe TechnologiesAttn: Bulldog Department
661 Main Street Waterboro, ME 04087
Please note that filling the form out by hand is acceptable but is not the preferred method as it will result in a longer wait time for receiving your detailed quote.
Fill out the form by clicking inside the check box next to the item desired, this should put an “x” in the box (see Example 1 below). Mac (Apple) users may not have compatibility with the check box feature. If you are unable to mark the check box please insert a “Y” in front of the check box next to the desired item (see Example 2 below).
Example 1: ☒Example 2: Y☐For any specs that require a written in response, that you are not sure how to answer or what to answer, please insert “TBD.”
E-Mail your completed spec sheet to:
Geoffrey Howe - [email protected]
If you require any assistance in filling out your spec sheet please feel free to contact the Howe & Howe Technologies Bulldog Department by phone: 207-247-2777 or by e-mail: [email protected].
Thank you and we look forward to hearing from you!
--Howe & Howe Technologies Bulldog Dept.
Truck
Truck Tier Selection
☒- Tier 1: New 2018-2019 Chassis: International 7400-7600 (HV) 4
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet
☐- 2 Wheel Drive ☐- 4 Wheel Drive – HH RECOMMENDED☐- Single Axle – HH RECOMMENDED☐- 2 Door Cab – HH RECOMMENDED☐- 4 Door Cab☐- Automatic – HH RECOMMENDED☐- Front Axle 14K☐- Front Axle 16K – HH RECOMMENDED☐- Front Axle 20K☐- Rear Axle 23K – HH RECOMMENDED☐- Rear Axle 26K☐-Engine Exhaust Brake– HH RECOMMENDED☐- Steering Stabilizer – HH RECOMMENDED☐- 38,200 GVW – HH RECOMMENDED☐- 300 HP/860 ft-lbs. torque L9 Cummins ☐- 330 HP/1000 ft-lbs. torque L9 Cummins☐- 350 HP/1000 ft-lbs. torque L9 Cummins–HH RECOMMENDED☐- 50gal Fuel Tank Minimum - HH RECOMMENDED☐- Air Horns (Hood Mounted) – HH RECOMMENDED☐- Rear Sliding Window☐- VDL (Vehicle Data Logger)☐- Air Ride Drivers Seat– HH RECOMMENDED☐- Air Ride Passengers Seat☐- Passengers Bench Seat (Only Available without Air Ride)☐- Rear Passenger Seats (4 Door Only)☐- SCBA Rear Seats☐- Heated Mirrors w/ Electronic Control☐- Cruise Control☐- Air Conditioning – HH RECOMMENDED☐- AM/FM Radio☐- Custom Center Console (Not Available with Bench Seat)☐- Extra Interior Lighting☐- Tires: Heavy Duty 54” XZL (Top Speed Rating: 55mph) ☐- Steel Wheels – HH RECOMMENDED☐- Tires: Heavy Duty 46” On/Off Road with OEM Aluminum Wheels
Desired Truck SpecsCab Color: ________________Body Color: _______________Overall Height: ____________Maximum Step Height :____________Maximum Speed: __________________ - HH RECOMMENDED: 65mph
Truck (continued)Siren☐- HH Siren – HH RECOMMENDED☐- Speaker: One (1)
Truck Tier Selection
☒- Tier 1: New 2018-2019 Chassis: International 7400-7600 (HV) 4
Reflective OptionsReflective:☐- None (Not for U.S.)☐- Standard DOT ☐- Standard NFPA
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet
☐- Speakers: Dual☐-Radio Rebroadcast Function☐-Multifunction Controller with auxiliary switches
Specify Desired Siren Specs:
Watts: _______- HH RECOMMENDS 100 WATTS
Speaker Location on Truck: ____________
Radio☐- Headsets w/ PTT on Headset☐ - Wireless Headsets
Brand: ________________ Quantity: ______________☐- Wired Headsets
Brand: ________________ Quantity: ______________ Location: ______________
Specify Desired Radio Specs: Radio Brand: __________________Mounted Location: ________________
Skid Plates:☐ - Front Bumper to Front Axle☐ - Cover Transmission and Transfer Case☐ -Fuel Tank, DEF Tank and Battery Box☐- Engine Oil Pan☐- Exhaust After Treatment ☐ - Additional Skid Protection Required:
Specify: ____________________________________
Apparatus BodyWorkstations: Locations☐- Front Right (Not for U.S.)☐- Front Left: (Not for U.S.)☐- Middle Right – HH RECOMMENDED
Truck Notes/Comments:
Radio Installation Options
☐- Customer Handles Install☐- Installed by H&H*Customer must supply the radio if “ Installed by H&H” is selected.
Reflective OptionsReflective:☐- None (Not for U.S.)☐- Standard DOT ☐- Standard NFPA
Workstations vs. Crosswalks
Crosswalks function like a bridge between workstations, allowing the operator to travel
directly from one workstation to another. You may choose to have workstations not connected by crosswalks. The Rear Cab (middle) Crosswalk connects the two workstations in the middle of the truck directly behind the cab. A rear vehicle crosswalk connects two workstations at the rear
of the truck Rear crosswalks cannot always be
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet
☐-Middle Left – HH RECOMMENDED☐- Rear Right☐- Rear Left☐-None
Crosswalks: Location Options☐- Rear Cab (middle of truck) – HH RECOMMENDED☐- Rear Vehicle ☐- None
Crosswalks: Material☐- Non Slip Surface☐- Diamond Plate☐- Epoxy Grit – HH RECCOMMENDED
Specify Desired Toolbox/Storage SpecificationsNumber of Toolboxes: _______Toolbox Sizes: L_______-W-_______H-_______ Location: ______________Toolbox Sizes: L_______-W-_______H-_______ Location: ______________Toolbox Sizes: L_______-W-_______H-_______ Location: ______________Toolbox Sizes: L_______-W-_______H-_______ Location: ______________
Toolbox/Storage: options☐- Hinge Doors w/ Slam Latches – HH RECOMMENDED☐- LED Lights in Box – HH RECOMMENDED☐- In-Bed Tool Storage☐- Store Pick Poles and Hard Section
Front Bumper☐- OEM Front☐- Bulldog Custom – HH RECOMMENDED☐-Receiver Hitch
Front Bumper: Winch (if Applicable select type and material)☐- Electric 15,000lb – HH RECOMMENDED☐- PTO Winch (specify lbs.) __________________☐- Steel Cable – HH RECOMMENDED☐- Synthetic RopeSpecify Desired Length (feet) ________________
Apparatus Body (continued)Front Bumper: Finish☐- Diamond Plate☐- Bed Liner – HH RECOMMENDED☐- Paint (Specify Color) _________________
Rear Bumper
Workstations vs. Crosswalks
Crosswalks function like a bridge between workstations, allowing the operator to travel
directly from one workstation to another. You may choose to have workstations not connected by crosswalks. The Rear Cab (middle) Crosswalk connects the two workstations in the middle of the truck directly behind the cab. A rear vehicle crosswalk connects two workstations at the rear
of the truck Rear crosswalks cannot always be
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet
☐-Bulldog Custom – HH RECOMMENDED☐- Receiver Hitch☐-HH Retractable Rear Bumper (Stow Away) – HH RECOMMENDED
Rear Winch Package ☐- No Winch – HH RECOMMENDED☐- Electric 15,000lb ☐- PTO Winch (specify lbs.) _______________☐- Steel Cable☐- Synthetic RopeSpecify Desired Length (feet)_________________
Rear Bumper: Finish☐- Diamond Plate☐-Bed Liner – HH RECOMMENDED☐- Paint (Specify Color) __________________
Other Apparatus Body Options☐- Quick Release Mud Flaps☐- Heavy Duty Head Board☐- Aux 120-volt A/C System (1500-watt inverter)☐- Auto Eject Battery Maintainer System ☐- Auto Eject Air Compressor System (Shore Powered)☐- Auto Eject Air System (External Air Source) ☐- Main Battery Disconnect – HH RECOMMENDED
Location: ☐- In Cab – HH RECOMMENDED ☐- On Battery Box
☐-Back – Up Camera☐- Forward Facing Camera☐- Grille Guard – HH RECOMMENDED☐- Hood Guard – HH RECOMMENDED☐- Body Guard – HH RECOMMENDED☐-Windshield Risers (nose to roof)☐- Tow Points Front and Rear – HH RECOMMENDED
Apparatus Body (continued)☐- Porta-Tank (Drop pool) Location: ☐- under truck (Complete HH Roller Mounted System 2100ga) ☐- under truck (Pool Storage with ½”Polypropylene Floor 2100ga)
☐ -Top (standard mounting) ☐ - Side (standard mounting) ☐- Side (standard mounting)
Rear Winch PackageDue to the amount of equipment and lack
of space on the back of a Bulldog a permanent rear winch cannot be
accommodated. To account for this, H&H has created a detachable rear winch
system. A Reese hitch is mounted on the rear of the truck, when desired the winch
can be fastened to the hitch and then detached when not in use. The winch is
stored in a custom built H&H winch storage box mounted to the truck.
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet
☐ - Other _________________
Size ___________________ Frame Material ______________________
Brand __________________
*The High Volume Swivel Dump Option cannot be used with any of the underbody pool storage options. A top or side mount must be used for pool storage if a swivel dump is required.
Apparatus Body (continued)
LightsWork Lights☐- LED Lights in Compartments – HH RECOMMENDED☐-LED Ground Lights (360° coverage)☐- LED Lights: illuminate all work platforms - HH RECOMMENDED☐- LED Lights: illuminate pump and valve area – HH RECOMMENDED Scene Lights
Apparatus Body Notes/Comments:
Warning Light Package
☐- H&H Standard Light Package
☐- NFPA Compliant Light Package
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet
☐- Adjustable and TelescopingSpecify Location: ___________
☐- Rear light on reverse circuit☐- Off-road LED bar front – HH RECOMMENDED☐- LED Side facing Work Lights – HH RECOMMENDED☐-LED lights for front and angles – HH RECOMMENDED
Warning Lights☐- HH 360° (standard) – HH RECOMMENDED Specify Colors: __RED_____________ ☐- Dual Color
Specify Colors: ___RED/________________☐- Amber Traffic Advisor
Specify Mounted Location: _____________
TankSize Options:☐- 500gal☐- 750gal☐- 1000gal☐- 1250gal☐- 1500gal ☐- 2000gal☐- Other
Lights/Logos Notes/Comments:
Warning Light Package
☐- H&H Standard Light Package
☐- NFPA Compliant Light Package
Maximum tank size on a 4 Door truck is 1,500 gallons.
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet
Specify: __________________________
Material Options☐- Poly – HH RECOMMENDED☐- Steel☐- Custom Steel
Additional Tank Options☐- Additional Foam Tank – HH RECOMMENDED: 30GAL☐- Top fill☐- Foam Tank Sight Glass ☐- Water Tank Sight Glass☐- Skirted sides of tank
☐-Skirting Painted to Match the Cab☐- Aluminum Treadplate skirting
☐- Digital Water Level Gauge – HH RECOMMENDEDLocation: ☐- In Cab – HH RECOMMENDED
☐- On Pump Panel– HH RECOMMENDED ☐- At Work Station
☐- NFPA Compliant Baffle Walls- HH RECOMMENDED
PumpPower Options: Diesel Divorced Pump☐- 5-10hp☐-10-20hp☐- 20-30hp – HH RECOMMENDED (Hale HPX300-KBD24)☐- 30-40hp☐ -40-60hp
Power Options: Gas Divorced Pump☐- 5-10hp☐- 10-20hp
Tank Notes/Comments:
Divorced vs. PTO Pumps
HH recommends the use of Divorced Pumps on Bulldog 4x4 Truck.
Benefits of Divorced Pumps- Divorced pumps do not derive
their power from the truck’s transmission
- - Divorced pumps give you the
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet
☐- 20-30hp ☐- 30-40hp – (HPX450-B35)
Power Options: PTO Pump☐- PTO Trans Take-off☐- PTO Engine Take Off
Specify Desired GPM: ______________Pump Brand and Model: ______________
Pump Options: Maximum GPM Desired☐- GPM: 100-200☐- GPM: 200-300☐- GPM: 300-400☐- GPM: 400-600☐- GPM: 600-800☐- GPM 800-1200
Pump Options: Maximum PSI Desired☐- PSI: 100-150☐- PSI: 150-200☐- PSI: 200-250☐- PSI: 250-350☐- PSI: 400+
Additional Pump Options☐- Share fuel from truck tanks☐- All Stainless Steel/Brass for all plumbing☐- Y-Strainer w/ Ball Valve Flush for water☐- Drafting Primer☐- Separate Fuel Filter/Water Separator☐- Foam System (Scotty 4171)
Pump (continued)Pump Controls: Location Options**Start, Stop, Throttle, and Pressure Gauges☐- At Pump☐- Rear of Truck☐- Crosswalk☐- Inside Cab
Pump Controls: Inside Cab**If you have selected “Inside Cab” above as a desired pump control location please checkall of the following controls that you would like tohave inside the cab:
Divorced vs. PTO Pumps
HH recommends the use of Divorced Pumps on Bulldog 4x4 Truck.
Benefits of Divorced Pumps- Divorced pumps do not derive
their power from the truck’s transmission
- - Divorced pumps give you the
Up to two (2) locations may be selected for pump controls.
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet
☐-Start & Stop☐-Throttle☐- Pressure Gauges
Pump Notes/Comments:
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet
PlumbingFire Hydrant Hook Up: Location☐- Driver Side Rear – HH RECOMMENDED☐- Passenger Side Rear
Fire Hydrant Hook Up: Specifications
Size: ________________________
Thread Male or Female: ____________________
Direct Tank Fill: Specifications
Size: ________2 ½ ”_________________
Thread: ☐- Male or ☐- Female
Location: ☐- Front or ☐- Rear
Location: ☐- Left or ☐- Right
Discharge Connections for Work Stations: Size (select one)☐- 1” – HH RECOMMENDED☐- 1.5”
Discharge Connections for Work Stations: Location☐- Middle Cab Left Station☐- Middle Cab Right Station☐-Rear Left Station☐- Rear Right Station
Plumbing Options: Other☐- Quick Fill Hatch Top – HH RECOMMENDED☐- High Volume Dump Gate☐-Electric dump☐- Swivel Dump *The High Volume Swivel Dump Option cannot be used with any of the underbody pool storage options. A top or side mount must be used for pool storage if a swivel dump is required.
Fire Apparatus
Plumbing Notes/Comments:
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet
Hose Reels☐- Hose Reels Quantity: ____________
Mount Location :____________☐- Electric Rewind☐- 1” x100’ Mounted on Rear of Tank – HH RECOMMENDED☐- 1.5” x 100’ Mounted on Rear of Tank☐- Straight End – HH RECOMMENDED☐- Pistol End
Hose Type☐- Rubber☐- Reel Lite
Hose Bed☐- Hose Bed on Top of Tank – HH RECOMMENDED☐- Hose Bed Covered☐- Cascade Holder on Top of Tank
Hose Bed Cover: If selected above☐- Rolling Cover ☐-NFPA Compliant Rolling Cover☐- Canvas Cover- HH RECOMMENDED☐- Custom HH Doors☐- NFPA compliant Anti-Flack straps
Hose Bed Specifications: (If checked above)
Feet of Hose Required: ________________________
Hose Kind: ______________________
Chemical Barrel Holders
☐- Chemical Barrel Holders
Specify (If checked above)
Location: ________________________
Number of Barrels: ________________
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet
Fire Apparatus (continued)Front Corner Bumper Nozzles☐- Front Corner Bumper Nozzles – HH RECOMMENDED☐- Control outside Valve☐- In Cab Electric Valve Control – HH RECOMMENDED☐- Separate Right and Left Nozzle Controls
Front Remote Monitor☐- Front Remote Monitor System – HH RECOMMENDED☐- Tethered☐- WirelessSpecify desired GPM: _________
Front Remote Monitor Brand Selection:☐- Akron☐- Task Force ☐- Elkhart
Front Remote Monitor System
HH recommends using a monitor with Fog Nozzle, quick disconnect and
stream shaper for the front remote monitor system.
Fire Apparatus Notes/Comments:
Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet
Pricing with Above Specifications
IMPORTANT NOTE: This is a simple non-binding quote EXAMPLE to provide a general idea of final truck pricing. Final pricing may vary depending on availability of base chassis and parts at the time of purchase. Final detailed quote can be obtained by contacting Howe & Howe Technologies and setting up a formal purchasing request. This quote does not include shipping.
TIER 1: NEW INTERNATIONAL CHASSIS (105K ALLOWANCE) 7400 4X4 $XXXXXX USD
If ORDERED WITHIN 60 DAY DISCOUNTED PRICE $XXXXXX USD