1
Types of Chemical Types of Chemical Reactions and Solution Reactions and Solution
StoichiometryStoichiometry
AP ChemistryAP Chemistry
Mrs. WestonMrs. Weston
Chapter 4Chapter 4
2
Water, the Common SolventWater, the Common Solvent
Solute: substance dissolved in a liquid to form a solution-Dissolve in the solvent (often water)-Is present in lesser amount than the solvent
Solvent: the dissolving medium
When water is the solvent the solution is aqueous
- abbreviated (aq)
Properties of Solutes in Aqueous SolutionProperties of Solutes in Aqueous Solution
3
Water, the Common SolventWater, the Common Solvent
Water is a polar molecule
• Since Oxygen is slightly more electronegative than Hydrogen, it obtains a partial - charge; hydrogen receives a partial + charge
Properties of Solutes in Aqueous SolutionProperties of Solutes in Aqueous Solution
• The positive end of the water molecule is attracted to the negatively charged solute ions.• This process is called hydration
4
Ionic Compounds in WaterIonic Compounds in WaterIons dissociate in water.In solution, each ion is surrounded by water molecules.Transport of ions through solution causes flow of current
Properties of Solutes in Aqueous SolutionProperties of Solutes in Aqueous Solution
Video
5
Molecular Compounds in WaterMolecular Compounds in Water
Molecular compounds in water (e.g., CH3OH): no ions are formed.If there are no ions in solution, there is nothing to transport electric charge.
Properties of Solutes in Aqueous SolutionProperties of Solutes in Aqueous Solution
6
Strong and Weak ElectrolytesStrong and Weak ElectrolytesStrong electrolytes: completely dissociate in solution.For example:
Weak electrolytes: produce a small concentration of ions when they dissolve.These ions exist in equilibrium with the un-ionized substance. For example:
Properties of Solutes in Aqueous SolutionProperties of Solutes in Aqueous Solution
HCl(aq) H+(aq) + Cl-(aq)
HC2H3O2(aq) H+(aq) + C2H3O2-(aq)
7
Strong and Weak ElectrolytesStrong and Weak Electrolytes
Properties of Solutes in Aqueous SolutionProperties of Solutes in Aqueous Solution
8
AcidsAcids
Properties of Solutes in Aqueous SolutionProperties of Solutes in Aqueous Solution
Strong acids -dissociate completely to produce H+ in solution
ex: hydrochloric and sulfuric acid
Weak acids - dissociate to a slight extent to give H+ in solution
ex: acetic and formic acid
9
BasesBases
Properties of Solutes in Aqueous SolutionProperties of Solutes in Aqueous Solution
Strong bases - react completely with water to give OH- ions.
ex: sodium hydroxide
Weak bases - react only slightly with water to give OH- ions.
ex: ammonia
10
The Composition of SolutionsThe Composition of Solutions
Often when performing stoichiometric calculations we need to know how much of a reagent is found in solution.
•usually expressed as a concentration
M
M
molaritymoles of soluteliters of solution
HClmoles of HCl
liters of solution3
62
11
The Composition of SolutionsThe Composition of Solutions
Problem 1: If 1.56 g of gaseous HCl is dissolved in enough water to form 26.8 ml of solution, what is the molarity?
12
The Composition of SolutionsThe Composition of Solutions
Problem 2: Typical blood serum is about 0.14 M NaCl. What volume of blood contains 1.0 mg of NaCl?
13
The Composition of SolutionsThe Composition of Solutions Preparing Dilutions Preparing Dilutions
a) Mass the appropriate amount of solid substance(the solute), then place the solute in a volumetric flask
b) Add approx. 1/3 of the total volume of solvent required
14
The Composition of SolutionsThe Composition of Solutions Preparing Dilutions Preparing Dilutionsc) Dissolve the solute by swirling the flask
(with stopper in place)
d) Add water until the level of the solution just reachesthe etched mark on the flask, then invert the flask 7x
15
The Composition of SolutionsThe Composition of Solutions Preparing Dilutions Preparing Dilutions
(a) A measuring pipet is graduated and can be used to measure various volumes of liquid accurately. (b) a volumetric (transfer) pipet is designed to measure one volume accurately.
Video – Types of Pipets
Video – Creating a dilution
16
The Composition of SolutionsThe Composition of Solutions Preparing Dilutions Preparing Dilutions
Problem 3: To analyze the alcohol content of a certain wine, a chemist needs 0.750 L of an aqueous 0.200 M potassium dichromate solution.
How much solid must be weighed out to make the solution? Describe how the solution would be prepared.
17
The Composition of SolutionsThe Composition of Solutions Preparing Dilutions Preparing Dilutions
Problem 4: When preparing acid solutions for the lab, it is often necessary to dilute a concentrated stock solution.
If 1.5 L of 0.50 M H2SO4 solution is needed, and the H2SO4 stock solution is 16 M, describe how to prepare the dilute solution.
18
Types of Chemical ReactionsTypes of Chemical Reactions
Major Categories of Chemical Reactions
•Precipitation reactions
AgNO3(aq) + NaCl(aq) AgCl(s) + NaNO3(aq)
•Acid-base reactions
NaOH(aq) + HCl(aq) NaCl(aq) + H2O(l)
•Oxidation-reduction reactions
Fe2O3(s) + Al(s) Fe(l) + Al2O3(s)
19
Precipitation ReactionsPrecipitation Reactions
Two solutions are mixed yielding an insoluble substance called a precipitate
Ex: K2CrO4(aq) + Ba(NO3)2 (aq) --> products
In order to determine which product yields the precipitate we need to consider each of the ions available in the reaction
20
1) Write the molecular equation - shows all species listed in their molecular forms:
Ex: K2CrO4(aq) + Ba(NO3)2 (aq) --> BaCrO4(s) + 2 KNO3(aq)
2) Write the Complete ionic equation- List all ions and solid products (in a complete ionic equation, all strong electrolytes are written as ions)
Ex: 2K+(aq) + CrO42-(aq) + Ba2+(aq) + 2 NO3
-(aq) --> BaCrO4(s) + 2 K+(aq) + 2NO3
-(aq)
Precipitation Reactions:Precipitation Reactions:Writing Ionic EquationsWriting Ionic Equations
21
3) Write the Net ionic equation-list only the unique ions which are found in ion form on only one side of the equation. Also write any solid or gaseous reagents
Ex: CrO42-(aq) + Ba2+(aq)
--> BaCrO4(s)
Spectator ions: K+(aq) & NO3-(aq)
Precipitation Reactions:Precipitation Reactions:Writing Ionic EquationsWriting Ionic Equations
22
Memorize these!!
1. Most compounds containing Group 1 elements and the ammonium ion are soluble.
2. Most nitrates, chlorates, and acetates are soluble, except silver acetate.
3. Most halogen salts are soluble except those of silver, mercury (I), and lead.
4. Most sulfates are soluble, except those of silver, mercury (I or II), lead, calcium, strontium, and barium.
5. Calcium, strontium, and barium hydroxides are soluble, along with group 1 and ammonium. Most other hydroxides are basically insoluble.
6. Ionic compounds not covered by a previous rule are mostly insoluble.
Simplified Solubility RulesVideo
Lyrics to song
23
Using Solubility Rules
24
Using Solubility Rules
Problem: Predict what, if anything, will happen when the following pairs of solutions are mixed:
a. KNO3 (aq) and BaCl2 (aq)
b. Na2SO4 (aq) and Pb(NO3)2 (aq)
c. KOH (aq) and Fe(NO3)3 (aq)
25
Using Solubility Rules
Problem: Predict what, if anything, will happen when solutions of potassium hydroxide and iron (III) nitrate are mixed. If any reaction occurs, write the molecular equation & net ionic equation.
26
Stoichiometry of Precipitation Reactions
27
Stoichiometry of Precipitation Reactions
Use your knowledge of stoichiometry from Chapter 3 to solve the following problem:
When 2.00 L of 0.0250 M sodium sulfate and 1.25 L of 0.0500 M lead (II) nitrate are mixed, what substance precipitates? How many grams of that substance will be formed?
28
Introduction to Acid/Base ReactionsIntroduction to Acid/Base Reactions
Acid/Base ReactionsAcid/Base ReactionsSteps for solving problems:Steps for solving problems:
1. List initial species and predict reaction.
2. Write balanced net ionic reaction.
3. Calculate moles of reactants.
4. Determine limiting reactant.
5. Calculate moles of required reactant/product.
6. Convert to grams or volume, as required.
29
Introduction to Acid/Base ReactionsIntroduction to Acid/Base Reactions
Acid/Base ReactionsAcid/Base Reactions
In a certain experiment, 28.0 ml of 0.250 M HNO3 and 53.0 ml of 0.320 M KOH are mixed. Calculate the amount of water formed. What is the concentration of H+ or OH- ions in excess after the reaction goes to completion?
30
Introduction to Acid/Base Reactions Introduction to Acid/Base Reactions
Strong Acids• HCl
• HBr
• HI
• HNO3
• H2SO4
• HClO3
• HClO4
Strong Bases• LiOH
• NaOH
• KOH
• RbOH
• Ca(OH)2
• Sr(OH)2
• Ba(OH)2
31
Introduction to Oxidation-Reduction Introduction to Oxidation-Reduction ReactionsReactionsOxidation and ReductionOxidation and Reduction• When a metal undergoes corrosion it loses electrons to
form cations:
Ca(s) +2H+(aq) Ca2+(aq) + H2(g)– Oxidized: atom, molecule, or ion becomes more positively
charged.
• Oxidation is the loss of electrons.
– Reduced: atom, molecule, or ion becomes less positively charged.
• Reduction is the gain of electrons.Video
32
Introduction to Oxidation-Reduction Introduction to Oxidation-Reduction ReactionsReactions
Figure 4.20: A summary of an oxidation-reduction process, in which M is oxidized and X is reduced.
33
Oxidation Number RulesMemorize these!!
1. Pure elements have an oxidation state = 0.
2. Monatomic ions have an oxidation state = to their charge.
3. Oxygen has an oxidation state = -2, (except in peroxides, where it = -1)
4. Hydrogen has an oxidation state of +1(except when combined with metals, where it = -1.
5. Fluorine is always assigned an oxidation state of -1.
6. The total of the oxidation states of all atoms in a compound must = 0. The total of the oxidation states in an ion must equal the ion charge.
34
• K2Cr2O7
• CO32-
• HClO4
• MnO2
• PCl5
• SF4
Find the oxidation states for each of the elements in each of the following compounds:
React
35
Introduction to Oxidation-Reduction Introduction to Oxidation-Reduction ReactionsReactionsThe Half-Reaction Method (pg. 172): 1. Write separate reduction, oxidation reactions.
2. For each half-reaction:• Balance elements (except H,O)
• Balance O using H2O
• Balance H using H+
• Balance charge using electrons
3. If necessary, multiply by integers to equalize # of e-.
4. Add half-reactions and eliminate redundancies.
5. Check that elements and charges are balanced.
36
Introduction to Oxidation-Reduction Introduction to Oxidation-Reduction ReactionsReactionsThe Half-Reaction Method: (acidic solution)Turn to pg. 175 and follow the steps.Sample Exercise 4.19Potassium dichromate is a bright orange compound that can be reduced to a blue-violet solution of Cr+3 ions. In acidic solutions, K2Cr2O7 reacts with ethyl alcohol (C2H5OH) as follows:
H+(aq) + Cr2O7
2-(aq) + C2H5OH(l) -->
Cr3+(aq) + CO2(g) + H2O(l)
Balance this equation using the half-reaction method.
37
•Balance the following oxidation-reduction reactions that occur in acidic solution.
•ClO-(aq) + I-(aq) Cl-(aq) + I3-(aq)
•Br -(aq) + MnO4-(aq) Br2(l) + Mn2+(aq)
•CH3OH(aq) + Cr2O72-(aq) CH2O(aq) + Cr3+(aq)
React
38
Introduction to Oxidation-Reduction Introduction to Oxidation-Reduction ReactionsReactionsThe Half-Reaction Method: (basic solution)
1. Balance as in acid.
2. Add OH- that equals H+ ions (both sides!)
3. Form water by combining H+, OH-
4. Check elements and charges for balance.
39
Introduction to Oxidation-Reduction Introduction to Oxidation-Reduction ReactionsReactionsThe Half-Reaction Method: (basic solution)Turn to pg. 178 and follow the steps.Sample Exercise 4.20Silver is sometimes found in nature as large nuggets; more often it is found as ores. An aqueous solution containing cyanide ion is often used to extract the silver using the following net reaction that occurs in basic solution:
Ag(s) + CN-(aq) + O2(g) --> Ag(CN)2
-(aq)
Balance using the half-reaction method.
40
Types of Chemical Reactions and Types of Chemical Reactions and Solution StoichiometrySolution Stoichiometry
The EndThe End