performance testing
HYDRAULIC FLOW 1000L/hr, 24hrs, 5days.Surge (5 minutes ON: 10 minutes OFF)
OIL DOSE RATE 50L/day, Final Oil Volume = 250LContinuous
TEST TEMPERATURE >35°CThermostatically Controlled
RESULTS Traps over 90% of oil and solids(when maintained correctly)
1000L Polymer Grease Arrestor AUTHORITY APPROVALS
1
DrainageSolutions
InteriorProducts
Environmental Civil & Commercial
proDUct Variations
above ground 1000L polymer grease arrestor with class a lid | ei code: 80500Below ground 1000L polymer grease arrestor with class B lid | ei code: 80501Below ground 1000L polymer grease arrestor with class D lid | ei code: 80502
Pictured 80500
eVerHarD inDUstriesABN: 41 009 690 859
everhard.com.au | 131 926Head office: 405 Newman Rd, Geebung, QLD, 4034
2
DrainageSolutions
InteriorProducts
Environmental Civil & Commercial
featUres anD Benefits
• Passive separation using internally moulded baffle walls• No filters mean no blockages• Above and below ground models available• Above ground model weighs approximately 130kg• Passes AS/NZS1546.1:2008 Side Load Test• Registered design• Australian made
easiLY transporteD
Everhard's 1000L Polymer Grease Arrestor's compact size and relatively low weight means easy delivery and placement on site. The Arrestor fits through standard door or passageways and will not take up valuable space in basements or car parks. Once on site the arrestor can be easily handled and manoeuvred without the need for machinery.
aciD resistant
The polyethylene material used in the construction of the arrestor is extremely resistant to the aggressive acids contained in oil and fat laden wastewater. This resistance provides the arrestor with a very long life expectancy unlike arrestors manufactured from other materials such as steel and concrete.
oDoUr tigHt
The covers provide a complete seal making the polymer grease arrestor gas- and water- tight.
DUraBLe
Polyethylene guarantees a high durability against dents, cracks or breaks in the material.
easY to cLean
The smooth wax-like surface of the arrestor hinders the build up of coagulated oils and fats. This allows for quick and easy cleaning of the arrestor with minimal use of rinse water.
recYcLaBLe materiaL
Polyethylene can be fully recycled and reused for the production of high quality products.
coUnciL approVeD
In-house test results of the 1000L Polymer Grease Arrestor pass criteria se via national product appraisal schemes and this has resulted in it being approved for use by a growing number of councils and authorities in regions throughout Australia. Sydney Water, Queensland Urban Utilities and Unity Water have given their approval with many councils following suit. Visit everhard.com.au to download the full list of Authority Approvals.
WarrantY
Everhard Industries guarantees the 1000L Polymer Grease Arrestor for 15 years on all polymer components and 5 years on parts.
For more information contact 131 926
eVerHarD inDUstriesABN: 41 009 690 859
everhard.com.au | 131 926Head office: 405 Newman Rd, Geebung, QLD, 4034
3
version: 002
DrainageSolutions
InteriorProducts
Environmental Civil & Commercial
tecHnicaL DraWings
Disclaimer: All measurements are in millimeres and are solely for reference purposes. Any changes resulting from technical advance of design or other alternations may be made without prior notice. Installation instructions and information on warranties is available at everhard.com.au
Product Code Description Installation Capacity Inlet Height Weight (kg)
80500 Free-standing polymer grease arrestor with polymer odour-tight Class A
cover and PE-HD DN100mm inlet and outlet connections
Above ground 1000L 1080mm 130
Product Code Description Installation Capacity Inlet Height Weight (kg)
80501 Below ground Polymer arrestor, closed gas-tight cast iron Class B lid and
PE-HD DN100mm inlet and outlet connections
Below ground 1000L 520mm 175
80502 Below ground Polymer arrestor, closed gas-tight cast iron Class D lid and
PE-HD DN100mm inlet and outlet connections
Below ground 1000L 545mm 195