7/28/2019 1.6. Peeters
1/24
1
PURCHASING AND COST MANAGEMENT IN THE SUPPLY CHAIN
Towards an integrative framework
Work in Progress
First Draft
Johan Peeters*
Lieven Quintens
ABSTRACT
In recent years, it has been acknowledged by literature that thoroughly coordinated
purchasing efforts can become a strategic weapon in the current market environment. The
cost management literature, on the other hand, has given many concepts to interpret these
efforts. However, this is hardly done. This paper contributes to this by presenting an
integrative framework between the purchasing function process and the concepts that are
developed in cost management in supply chains, i.e. supply chain costing, proactive cost
management, lean management accounting, inter-organisational cost management and
organisational settings. Pilot case study research is conducted in order to explore this
framework and its application to the first and second tier automotive suppliers from a Belgian
OEM.
JEL-code: L22, M00
Keywords: cost management, purchasing, supply chain management
*: Corresponding author: Johan Peeters
Corresponding addresses: Lessius Hogeschool , Korte Nieuwsstraat 33, 2000 Antwerpen; tel. +32 (0)3 201 18
14; fax. +32 (0)3 201 18 99; email: [email protected] and Limburgs Universitair Centrum,
Universitaire Campus Gebouw D, 3590 Diepenbeek
7/28/2019 1.6. Peeters
2/24
2
INTRODUCTION
In recent years, it has been acknowledged by literature that purchasing can play a key role in a
firms policy. While purchasing activities traditionally have been considered as part of the
operational activities of a company, nowadays they are presented as strategic weapons facing
the threat of the current market environment (Trent & Monczka, 1998; Gadde & Hkansson,
2001). With the reduction of many trade barriers, global purchasing has indeed become a
reality. This globalisation of the market implies for suppliers that they should be aware of
competitors on a worldwide scale.
A thorough coordination and control of purchasing related actions, such as adopting shorter
delivery times and reducing on-hand inventory (Das & Handfield, 1997), is not only a way to
generate short-term solutions, it is essential to create competitive advantages. These
advantages include more flexibility, faster introduction of ever more innovative products and
lower total cost of ownership. The advantages can be found both at the level of an individual
company as well as at the level of the supply chain.
Cost related issues have always been important in purchasing. The belief that purchasing was
a mainly operational activity put heavy pressure on the cost of goods and services that were
purchased. Nowadays, the situation has become more complex. Supplier relationships, quality
and innovativeness are all becoming much more important, while cost aspects remained one
of the key elements of purchasing.
However the importance attached to costs in purchasing, literature on supply chain
management and purchasing does not deal explicitly with cost management (Ellram, 2002).
Most literature on these topics discusses how the interfaces between buyers and suppliers can
be made more efficient. Only recently questions have been raised in literature about the role
and integration of modern management accounting techniques In supply chains on the one
hand and supply chain management on the other hand (Wouters, 1999; Ellram, 2002).
This paper aims at filling in this gap. The concept of cost management in supply chains is
seen from a holistic perspective with a strong emphasis supplier involvement and purchasing.
A careful consideration of cost aspects in the supply chain during the early stages has already
been proven beneficial for a company (Wynstra & Ten Pierick, 2000). Although looking at
7/28/2019 1.6. Peeters
3/24
3
the intersection of both disciplines, supply chain management and cost management, does not
lead to a single, clear concept. Therefore, this paper focuses on the concepts for cost
management in supply chain management and the implications on purchasing.We start this
discussion with the trade-off between local versus global purchasing decisions in the supply
chain. Therefore, the first part of the paper will give an overview of local versus global
purchasing and its relation to cost management. The second part of the literature review deals
with supply chain management and the intersection of this discipline with cost management
and new product development. This section provides insights on how cost management in
supply chains can be conceptualised. Furthermore, the paper empirically tries to validate these
findings through the investigation of several first and second tier suppliers of an Original
Equipment Manufacturer (OEM) plant in Belgium. These pilot case studies describe the use
of concepts and techniques for cost management in supply chains in relation to purchasing
and new product development and how this is passed on through the supply chain.
PURCHASING AND COSTS
Local versus global purchasing: why purchasing abroad?
The purchasing literature has given many reasons why companies purchase abroad (Rexha &
Miyamoto, 2000; Birou & Fawcett, 1993). Generally spoken, however, four main reasons for
buying internationally can be distinguished. The first reason is the availability of the product
that is sourced. Some products can only be found at very specific places in the world (e.g., a
number of raw materials). Moreover, some companies add international suppliers to their
portfolio in order to be able to respond to a future or unexpected increase in demand.
Secondly, quality related issues have become important. This is closely related with the
uniqueness of a product and is particularly important in high-tech industries. Components
from different manufacturers can only differ on some minor characteristics, but this could
make it incompatible with other components. The number of companies that become possible
suppliers is therefore limited, but this phenomenon increases the need of purchasing abroad.
Moreover, when quality is considered, thorough supplier selection criteria will limit the range
of possible suppliers that can offer acceptable solutions to a few, not necessarily the local
ones.
7/28/2019 1.6. Peeters
4/24
4
The third reason is the strategic vision of the company. Companies realise that the world is
globalising, and action should be undertaken in order to deal with the fierce competition.
International purchasing can be a tool to tackle this competition. As a consequence, world-
class suppliers are sought, foreign business cultures are better understood, and even brand
awareness is pursued, all contributing to a better competitive position for the company.
However the abovementioned three reasons has been indicated as very important, the cost
aspect cannot be neglected as an important reason for going internationally. The ultimate aim
is to find the supplier who produces or delivers the desired product (in terms of quality, time
aspects,) at the cheapest price. Because of some typical characteristics of global trade
(different cultures/languages, large distance), risk will be increased and the purchasing
process will face increased complexity than when only dealing with local suppliers.
This cost aspect is difficult to comprise, because both direct and indirect costs should be
detected and evaluated. While cost-related aspects can be the main drivers for engaging in
international activities, most of the barriers are also related with cost aspects. This is in line
with Carter and Narasimhan (1990) who defined 14 cost elements that should be taken into
consideration especially when engaging in global purchasing.
The drivers are related to the cheaper costs of the products or services. Foreign countries often
have cheaper labour and benign tax policies, which makes it possible for companies
(especially in new developing economies) to produce high quality goods at a lower price than
in most developed countries. While the cost of the goods is only one aspect, other costs may
not be clear at first sight. These costs are mostly seen as barriers, because they generally are
higher for activities abroad. The most obvious example is the transportation cost, which can
become even more than 25 % of their purchasing budget (Murphy & Daley, 1994). Besides an
increase of transportation costs, international purchasing is hindered by an increase in
communication and coordination costs, travel costs and inventory costs. These costs are
difficult to determine, for example how to calculate the cost of language problem or how to
preview the long-term effects of exchange rates on the cost of purchased goods or services.
It is clear that all the pros and cons of local and global purchasing have to be taken into
consideration, not only the directly allocated cost aspects in order to make a balanced
decision. While local purchasing can be financial beneficial for a company, because of low
7/28/2019 1.6. Peeters
5/24
5
transportation costs and the absence of tariffs (Murray, Wildt & Kotabe, 1995), global
purchasing can in his turn offer lower product costs due to the abovementioned reasons.
The purchasing view on costs
Cost has always been a major issue in purchasing, whereby elements such as cost reduction
were important. This does not mean, however, that cost minimisation is always the best
solution while striving to achieve more profit (Dunning, 1993). Increasing costs is therefore
not necessarily considered as problematic, as long as the associated revenues grow faster
(Dobilas & McPherson, 1997).
Let us take a closer look now on how costs are perceived throughout the purchasing process.
Cost related aspects are found in every part of the purchasing function. A model that is
frequently used in the purchasing literature is the model of Van Weele (2002; see figure 1).
He defines purchasing as a six staged process. To every step in this model, specific costs can
be defined that should be considered in the decision to source and supply local or global.
Figure 1: The purchasing function process (Van Weele, 2002)
The price of a product is the most obvious component of the total amount of money a
company has to foresee in order to obtain the product. Management accounting learns that
this price include the material costs, the cost of direct labor and a number of indirect costs in
order to manufacture the product. These cost elements imply that foreign sources are seen as a
7/28/2019 1.6. Peeters
6/24
6
valuable alternative for local purchasing. Price levels of the material and indirect costs are not
equal throughout the world. Moreover the regions where these costs are lowest are
characterized by lower wages. This makes foreign product prices competitive with local ones.
However, when a product is purchased, additional costs should also be taken into
consideration. The previously mentioned model of Van Weele (2002) is used to determine the
costs associated in each of the purchasing stages, as shown in table 1. It should be noted
however, that these costs do not always occur, and if so, their impact on the total cost is often
negligible. Examples of these costs are risk of obsolescence or damage during transport.
Travel costs when selecting a supplier will take place when for instance a new supplier has to
be found for an important product. While a less important product has to be bought and five
well-known suppliers in the supplier portfolio offer that type of product, it is likely that no
plant visit will be organized before selecting the supplier.
The different costs associated to a particular stage are interconnected. The case of the
specifications is a clear example of this. In this stage, specifications (e.g. quality, logistics and
maintenance) are defined that imply costs later on in the purchasing process in the contracting
and expediting stages (Van Weele, 2002).
Stage Associated costs
Determining specification R&D costsInternal coordination costs
Selecting supplierTravel costs
Information gathering costs
Contracting
Legal costs
Negotiation costs
Communication costs
Ordering -
Expediting and evaluation
Transportation costs
Communication costs
Import/Export duties
Insurance costsQuality control costs
Follow-up and evaluation
Quality control costs
Inventory costs
External coordination costs
Administrationandorganization
alcosts
Table 1: stages in purchasing and their associated costs
7/28/2019 1.6. Peeters
7/24
7
Internal coordination costs are the costs associated with bringing together different
departments such as production and marketing that need to be contacted to give their opinion.
External coordination costs are the costs that make the buyer-supplier relationships work well.
One type of costs is present in all stages of the purchasing process: the administration and
organizational costs. These costs ensure the fluent transition from one stage to another.
The costs mentioned in table 1 assume that the product is actually purchased from an outside
firm. However, to find the optimal solution, a make-or-buy decision has to be undertaken.
SUPPLY CHAIN MANAGEMENT AND COST MANAGEMENT
The supply chain view on costs
While the importance of purchasing is often discussed from the perspective of a single
company, this scope can be broadened to evaluate the impact of purchasing through supply
chain management.
Within the new market environment customers desire shorter delivery times, more flexibility
and faster introduction of ever more innovative products (Kaplan & Cooper, 1999). This new
market situation and the decreasing level of vertical integration have led to the need of supply
chain management in practice.Hereby the flow of products, services and information is pro-
actively planned and coordinated from procurement of raw materials to delivery of finished
products in order to increase the efficiency of the process (Scannell, 2000; Matthyssens et al.,
1998). A better cooperation between functional areas and links within the supply chain is not
only desired within a single organisation but also between all the members of the supply
chain. Supply chain management, from the operational management perspective, attempts to
improve this coordination as a whole. Although there is no comprehensive definition, supply
chain management is often described as a collaborative cross-enterprise operating strategy
(Cooper & Ellram, 1993; Smith & Lockamy, 2000). In this respect, supply chain management
aims at cost reduction and the improvement of services in general through improved supply
chain relationships and cooperation. This is in line with the current trend of closer buyer-
supplier relationships. It is obvious that supply chain management brings together two major
issues: the management of material and information flows and the management of
7/28/2019 1.6. Peeters
8/24
8
relationships. In this respect supply chain management can be seen as a platform of methods,
concepts and techniques.
This platform of supply chain management intersects with the discipline of management
accounting and cost management. Like supply chain management and all other disciplines,
management accounting and cost management have also changed because of the
developments in the business environment during the last two decades (Kaplan & Cooper,
1999). Not only the changes in the market place and the technology but also new
manufacturing methods, organizational structures and new management styles have led to the
arising of new management accounting techniques. The use of traditional management
accounting systems in this new business environment led to shortcomings as distorted product
costs, irrelevant and dysfunctional operational control information and ineffective
performance measurement (Siau, 1999). Instead of using one accounting system, different
separate systems are needed for valuations of inventories, cost measurement of products and
operational control and performance measurement.
During the 80s new and more accurate cost systems were being developed that calculated the
cost of activities and allocated the activity costs to the cost object that consumed the activities.
Many of these new techniques, like activity-based costing, share a strong focus on activities
or processes and a horizontal view of the company. Other important features of the new
techniques are the increased interest in non-financial measurements, the inclusion of both
historical and future events as well as the fact that they are process-oriented and go beyond
the boundaries of the firm. Manufacturing companies have after all limited freedom in cost
management in the product development stage and therefore highly dependent on other
members of the supply chain, mainly for two reasons. First, because product life cycles are
becoming increasingly shorter and the high level of designed-in costs, cost management
became more and more focused on the products planning and design phase (Blanchard,
1978). Beside this, manufacturing enterprises are increasingly outsourcing the value added of
their products and most of the associated design tasks (Cooper & Slagmulder, 1997).
Therefore, in addition to the activity based cost innovation, the discipline of management
accounting initiated cost reduction and control techniques that crossed the borders and
boundaries of the company. With the application of these cost management techniques in
supply chains, the company is seeking closer ties involving cost information sharing and
R&D collaboration with suppliers (Seal et al., 1999; McIvor, 2001).
7/28/2019 1.6. Peeters
9/24
9
To a certain level, cost management is connected to purchasing and supply chain
management, as cost reduction and containment are crucial for gaining competitive
advantage. Looking at the intersection of both disciplines does however not lead to a single
clear concept as mentioned before. This paper focuses on how cost management in supply
chains can be conceptualised and applied in the purchasing process. We therefore describe
five concepts that illustrate that costs are not only created by means of material and
information flows along the supply chain, but also by the supply chain itself.
In order to effectively reduce costs in a supply chain, cost management instruments or
techniques are used. Two of those instruments, activity-based costing and target costing form
a unifying topic throughout the concepts. These two instruments will be explained in the next
section.
Activity-based costing and activity-based supply chain costing
Activity-based costing (ABC) systems refine cost systems by focusing on individual activities
as the fundamental cost objects. Because direct cost can be traced easily to jobs and products,
ABC-systems focus only on indirect costs. Activity-based costing is based on the idea that
costs are caused by different activities. Hereby the system calculates the costs of individual
activities and assigns costs to cost objects such as products and services on the basis of the
activities undertaken to produce each product or service (Figure 2). This assignment is made
through the use of cost drivers, i.e. the causal factors that cause cost of an activity to change.
The aim of ABC is not only to implement a more accurate cost calculation. ABC can also be
used for a wide range of cost management applications, such as cost reduction and activity-
based budgeting (Kaplan & Cooper, 1999; Horngren et al., 1997).
7/28/2019 1.6. Peeters
10/24
10
Fundamental Cost Objects Assignments to other Cost Objects
Activities Costs of Activities
Cost drivers
Figure 2: The concept of Activity-Based Costing (Kaplan & Cooper, 1999, adapted)
Although the concept of ABC is traditionally applied within a single company, its application
can be broadened to the entire supply chain. Hereby ABC aims at optimising total overhead
costs in chain-wide perspective. This implies that not only overhead cost on firm level should
be analysed, but also the transaction costs on supply chain level. In this respect transaction
costs are analysed through the transactions linked to them (Seuring, 2002).
Target costing and supply chain target costing
Besides the introduction of the activity-based costing technique (cfr. supra) that enabled the
transparency costs, the discipline of management accounting initiated cost reduction and
control techniques that crossed the borders of the company. In this respect target costing is
often mentioned as the main tool for cost management in supply chains (Cooper &
Slagmulder, 1997). The role and nature of this system of chained target costing in relation
with supply chain management is related in literature to the concepts discussed in the next
section of this paper. One important characteristic of target costing is that it is not a cost
accounting system like activity-based costing. The emphasis in the target costing process does
not lie on the accurate cost calculation, but on the cost reduction in the development of new
products (Everaert & Bruggeman, 1996; Monden & Hamada, 1991; Kaplan & Cooper, 1999).
Those new products have to be profitable when launched. Therefore, target cost is based upon
the selling price for the good or service:
Target Cost = Estimated Selling Price Desired Profit
Cost of :
Product Service Customer
7/28/2019 1.6. Peeters
11/24
11
The application of target costing in supply chain management focuses on the integration of
suppliers on the one hand and on-going cost reduction and re-design on the other hand during
the process of new product development (McIvor, 2001). Value engineering is often used in
this respect to describe the cost reduction process, as a systematic evaluation of all aspects of
the value-chain business functions, with the objective of reducing costs while satisfying
customers needs. Value engineering can result in improvements in product design, changes in
materials specifications, or modifications in process methods. (Horngren et al., 1997, p. 438)
A first important characteristic of target costing is its market focus. Fundamentally, the target
costing process is based on customer requirements, whereas the cost associated with the
product can be viewed as a result of those customer requirements translated in specified
functionality, quality and sales price. Because target costing has an eye on the market the
technique allows firms to respond quickly to fast changing market conditions and ever-
decreasing product lifecycles (McMann & Nanni, 1995). Secondly, target costing is often
used in a lean production environment. Hereby, the lean company will try to transform
innovation in products and processes to high quality, low production costs, returns to scale,
flexibility and differentiation by use of target costing (Debackere & De Backer, 1999).
Thirdly, product and process technology are so much integrated, that 80-95 % of a new
products cost are determined by its design and therefore are committed before the product
enters the manufacturing stage (Blanchard, 1978; Cooper & Slagmulder, 1997). This justifies
the importance of cost management in product design and the importance of the use of target
costing, which both try to reduce product costs in the design stage. The utmost opportunities
to reduce these costs are situated in this stage of the product lifecycle. A last important
characteristic of target costing concerns the product development cycle, whereas more
traditional systems of product development are characterised by a predetermined sequential
process of functions and departments.
Through the application of target costing, design teams became cross-functional. The product
design team with members of marketing, industrial design, product engineering,
manufacturing and purchasing integrates views of all key constituencies to make the tradeoffs
during the design stage (Hertenstein & Platt, 1998). Through the interaction of members of
the design team and management accountants, not only the cost can be controlled but also
quality and functionality. This cross-functional team approach, which crosses the borders of
the company, is also important with respect to the long-term buyer-supplier relationships
7/28/2019 1.6. Peeters
12/24
12
(Ellram, 2002). This trend of partnership sourcing also reduces the number of suppliers
(McIvor, 1997). Another advantage of the system of cross-functional design teams is the
reduced cycle time and time-to-market which allows to lean competitors to respond to
technological changes and shorter product life cycles. When the overall target is established,
the cost is allocated to the products various functions and components (Cooper & Chew,
1996). By means of this component level target costing, companies try to pass the cost
pressure onto its suppliers (Cooper & Slagmulder, 2001). Hereby supply chain management
plays a substantial role throughout this process (Ellram, 2002). The component level target
costing is necessary because manufacturing companies are limited in cost management in the
product development stage and they are therefore highly dependent on other members of the
supply chain.
As stated above, activity-based costing and target costing form a unifying topic throughout
the concepts of cost management in supply chains. Table 2 gives an overview of the concepts
and their main characteristics.
Author Concept Characteristics
Seuring Supply Chain Costing Three cost levels need to be analysed: direct,
activity-based, and transaction costs to account for
all costs in a supply chain and find the right
partner to control them.
Kajter Proactive Cost Management Proactive cost management is a market-oriented,
anticipatory system.
Hines,
Silvi,
Bartolini,
Raschi
Lean Management Accounting Linking strategic and operational levels to
understand customers and processes, and thus
enhance customer value.
Slagmulder Inter-Organisational Cost Management Managing supplier and customer costs in
coordinated cost reduction programs are carried
out during product design and manufacturing.
Goldbach Organisational Settings Cost management has a functional and an
institutional dimension. Principal-agent-relationships are important in the application of
cost management in a supply chain.
Table 2: Concepts for cost management in supply chain management (Seuring & Goldbach,
2002)
7/28/2019 1.6. Peeters
13/24
13
The contribution of this literature review lies in the fact that we try to couple the different
stages of purchasing of the model of Van Weele (2002) to the concepts of cost management in
supply chains (Figure 3). In this respect we examine to what extent purchasing associated
tasks are being dealt with and can be related to the five different concepts and their associated
techniques. The next section of the paper will explain the main characteristics of the different
concepts and their link with the model of Van Weele.
Supply Chain Management Cost Management
Figure 3: Linking concepts for cost management with purchasing associated costs
Supply Chain Costing
Three dimensions - product, relationships and costs - form the first conceptual framework of
supply chain costing (Seuring & Goldbach, 2002). In this framework three cost levels are
Stages of purchasing
Determining specification
Selecting supplier
Contracting
Ordering
Expediting and evaluation
Follow-up and evaluation
Techniques
Target Costing
Activity-Based Costing
Concepts
Supply Chain Costing
Strategic Cost Management
Lean Management Accounting
Inter-Organisational Cost Management
Organisational Settings
7/28/2019 1.6. Peeters
14/24
14
analysed: direct, activity-based, and transaction costs to account for all costs in a supply chain
and find the right partner to control them. Hereby direct costs can be influenced within a
single company, and transaction costs within the supply chain. An increase of costs on one
level, especially the transaction cost, will often reduce other costs. The view on transaction
costs and activity-based costs, is in line with the purchasing view on costs (Dunning, 1993;
(Dobilas & McPherson, 1997) and the model of Van Weele. Both literatures on purchasing
and the concept of Supply Chain Costing state that the relative importance of the three cost
levels, however, is highly dependent on the nature of the product. Transaction costs and
activity-based costs are higher for products with a very short production cycle, which is often
shorter than the product development time. This increased risk of investments that do not pay
off, emphasises the importance of transaction costs and activity-based costs. As a
consequence, those costs will be much lower for products with a longer life cycle. So far,
companies within the supply chain often focused only on costs within the borders of their
company. Through the integration of transaction costs in the concept of supply chain costing,
cost management is integrated in supply chain management on all stages of the supply chain.
The model of Van Weele is well suited in this respect to focus on the transaction costs related
to purchasing.
Proactive Cost Management
Although some conceptual work has been done in the field of cost management, only few of
them also deal with the management of costs in supply chains. Some approaches that gained
much attention are Strategic Cost Management, Inter-Organisational Cost Management and
Supply Chain Costing. The latter two are separately discussed in this section of the paper. The
framework of Kajter for proactive cost management, however, is a comprehensive
conceptual framework enabling the integration of numerous cost management parameters and
putting them in a broader context (Seuring & Goldbach, 2002). In order to be effective in a
highly competitive environment proactive cost management should be market-oriented and
holistic in the sense that it looks at the entire supply chain and product life cycle. Cost
management should also start in the design phase and should be anticipatory in order to
influence the future cost position. Effective cost management is also a continuous, cross-
functional improvement process, which requires involvement of every employee within the
7/28/2019 1.6. Peeters
15/24
15
company. This involvement can be seen over the complete purchasing process, especially in
the buyer-supplier relationship.
Lean Management Accounting
In this framework for extending lean accounting into a supply chain, Hines et al. (Seuring &
Goldbach, 2002) integrate lean management and strategic cost management. The concept of
lean management accounting has two basic ideas. Firstly, through the lean transformation of
the supply chain, waste is reduced both within and between companies and the supply chain is
aligned to the actual needs of the final customer. In this respect, strategic and operational
levels are linked to understand customers and processes, and thus enhance customer value.
Secondly, the framework deals with the development of an information and cost system able
to support the lean transformation of the supply chain. The framework forms an integrative
approach from different management research areas. The purchasing function process of Van
Weele (2002), can be seen as an important part of this lean transformation of the supply chain.
Inter-Organisational Cost Management
The fourth concept of inter-organisational cost management systems coordinate the cost
management systems between the firm and its clients and suppliers and increase the
efficiency of the interface between the buyers and the suppliers (Slagmulder in Seuring &
Goldbach, 2002). With the application of inter-organisational cost management (IOCM), the
company is seeking closer ties involving cost information sharing and R&D collaboration
with suppliers leading eventually to supplier involvement in customer design and joint buyer-
supplier cost reductions (Seal et al., 1999; McIvor, 2001). Inter-organisational cost
management manages supplier and customer costs by means of coordinated cost reduction
programs, carried out during product design and manufacturing (Cooper & Yoshikawa, 1994).
The concept of IOCM can be coupled to the first and the last stage of the model of Van
Weele, determining specification and expediting and evaluation. The stages of selecting
supplier, contracting and ordering are of relative less importance considering the more long-
term buyer-supplier relationships (Ellram, 2002).
7/28/2019 1.6. Peeters
16/24
16
Organisational Settings
In literature, cost management in supply chains mostly focuses on the management of
activities and transaction causing costs. Apart from this functional level, cost management has
also an institutional dimension, in which management is responsible for cost-related
decisions. So, principal-agent-relationships are important in the application of cost
management in a supply chain. Table 3 gives an overview of the analysis criteria that will
serve as a basis for the analysis of the agency relationship. The presented criteria describe two
extremes. Constellations between the two extremes remain however posible.
Analysis Criteria
Cooperative Confrontative strategy
Trust/incentives Control as coordination mechanisms
Trust-based Power-based relationships
Win-win solutions Win-lose solutions
Table 3: Analysis criteria related to the agency problem (Seuring and Goldbach, 2002)
Goldbach (Seuring and Goldbach, 2002) applied the analysis criteria on the two instruments
target costing and activity-based costing, described earlier in the paper. He described activity-
based costing as cooperative, using incentives and trust as coordination mechanisms, and
relying on trust. In target costing however, both a cooperative and confrontation strategy
exist.
RESEARCH METHOD
Clearly, no individual or function within the organization will have the ability to address all of
the abovementioned issues. To empirically validate the findings and suggestions made in
literature by means of open-ended interviews, a snowball case study method was used, in
which the initial contact point in the organization helps to identify those parties in the
organization that have the knowledge required to address the issues presented above. In this
stage of the research we interviewed the managing directors of 8 automotive companies as a
pilot case study to conduct a large case study and a large-scale survey based on these findings.
Apart from first and second tier suppliers we interviewed also a supplier of maintenance,
7/28/2019 1.6. Peeters
17/24
17
repair and operating materials and a Flemish coordinating organisation for automotive
suppliers.
The semi-structured interviews are conducted and analysed, based on the guidelines as
described by Eisenhardt (1989), Miles and Huberman (1994) and Yin (1994), amongst others.
Respondents were provided with a full text transcript to corroborate its accuracy.
Confidentiality is guaranteed and the participant names are disguised.
The research is focused on the Belgian automotive industry. Four major production plants are
situated in Belgium: Ford, General Motors, Volkswagen and Volvo, and another 11 assembly
plants are located within 300 km. As a consequence, for the total of 260 automotive suppliers
that are based in Flanders, 8.400.000 vehicles are within reach. As global competition grows
fiercer, those companies continue to look for new ways to increase their competitive edge
without jeopardizing their profit margins. The product prices are currently on that level that
improvements without rise for quality and continuation are no longer recommended.
Therefore, the car manufacturers are looking for new techniques whereby all segments of car
production and associated material handling and logistics must be permanently under
investigation for improvements to keep car-manufacturing cost at a minimum.
In the Belgian automotive sector, manufacturers have launched programs to decrease their
level of vertical integration. Externally purchased materials account for 60 % to 70 % of these
manufacturers cost. Car manufacturers are increasingly outsourcing non-core activities while
relying on upstream suppliers in order to achieve competitive advantages. This strategic
outsourcing reduces the number of suppliers and moves companies towards publicly declared
strategic partnerships. The case companies of this paper are first and second-tier suppliers of
an OEM plant in Belgium.
An outline is given with respect to the use and development of techniques described in
literature, related to local and global purchasing, supply chain management, cost management
in supply chains and new product development. Furthermore, the integration of the supply
base and the supplier relationships is highlighted, in particular, how techniques and principles
are passed on through the supply chain and what effects they have on new product
development.
7/28/2019 1.6. Peeters
18/24
18
RESEARCH FINDINGS
The most striking finding was the importance all parties of the supply chain attached to price
and cost, regardless of the position of the company in the supply chain, and regardless the
recent literature on purchasing, supply chain management and cost management that suggests
that other criteria have gained importance over price. Those criteria such as quality, delivery,
reliability, relationship, flexibility and service, are considered crucial throughout the entire
supply chain and are regarded as essential to survive in the automotive sector, but cost issues
definitely remain the most important.
The suppliers try to use the same principles for target costing for their customers as the OEM
imposes to them. However, three reasons are mentioned why this is not always possible. The
first one concerns the size of the second and third-tier suppliers. These suppliers are mostly
very small, which easily leads to liquidity and payment term difficulties, when first-tier
suppliers try to pass on payment terms set by the OEM. Certainly in the case of new product
development, liquidity problems can occur because first-tier suppliers of an OEM are often
paid-on-production. A second obstacle is the staff of the first-tier supplier. The number of
purchasers is mostly limited, leaving no opportunities to follow-up their suppliers in a way the
OEM does. The third reason is the product specificity. While first-tier products are very
specific and complex, second and third tier suppliers often produce standardised goods and
sell these to many customers. These findings are consistent with literature on purchasing and
the concept of supply chain costing and with the classifications of buyer-supplier relationships
based upon the nature of the product and the degree of interaction of the firms in the new
product development cycle (Cooper & Slagmulder, 1997; Cooper et al., 1997; Tyndall &
Gopal, 1998; Seuring & Goldbach, 2002).
The use of multifunctional teams is considered to be of great importance in the product
specification stage. Concretely, these teams aim at finding a balance between functionality,
quality, safety and the cost target. Besides these teams, the OEM is involved in the
specification phase, by setting the targets, but also by recalculating suggestions made by the
first-tier supplier. These calculations have to be made, because small changes can have large
implications. This phenomenon is more likely when dealing with complex and high-tech
products.
7/28/2019 1.6. Peeters
19/24
19
During the interviews it was clear that administration costs play a key role. There is a fixed
price for an order, independent of the quantity or price of the product. On the other hand,
inventory costs can be quite high. While the just-in-time principle aims at reducing inventory,
a shift is noticeable. Indeed, the inventory of the OEM is reduced, but now the inventory is to
a large extent kept by the first-tier supplier. However the just-in-time principle is used and
efforts are made to implement the concept throughout the entire supply chain, real just-in-time
only occurs between the OEM and first-tier suppliers. Because there is a shift in inventory,
there are still possibilities for inventory cost reductions if the principle could be used down
the supply chain.
These cost reductions are extremely important for the first-tier suppliers, as the OEM expects
that every year, productivity can be enhanced. Excess expenditures will be reduced to a
minimum. However, not all efforts will be effective. One company mentioned the necessity to
have a plant in the near surroundings of the OEM plant, because just-in-time requirements are
easier to comply and moreover, it reduces their costs, which benefits both the supplier and the
OEM. This is in line with the appearance of full system suppliers. Their parts are suited to be
transported over a conveyor belt. Another company indicated that the cost of hiring a plant in
the near surroundings of the OEM plant would not worth the effort, because the value does
not outweigh the needed investment. The same vision maintains when OEMs ask their
suppliersto follow them abroad. It will definitely be considered if when it is socio-economic
profitable.
Throughout the interviews we have noted little evidence that R&D collaboration with
suppliers eventually leads to supplier involvement in customer design and joint buyer-supplier
cost reductions. Collaboration focuses mostly on possible short-term contributions in terms of
reduction in lead-time or costs. As mentioned above, often suppliers are given all technical
and functional specifications, as CAD-information. As a consequence, opportunities for cost
reduction remain limited even though 80-95 % of a products cost is determined by its design.
Therefore OEMs costs are committed before the product enters the manufacturing stage. The
inter-organisational cost management focuses more on cost information sharing and annual
cost reduction targets set by the OEM. The research provides evidence that those cost
reductions are attained on direct product cost, acquisition cost and operations cost, however
this is only done within the organisation. In order to achieve these annual cost reduction
targets, the OEM asks for an open accounting system, whereby cost transparency forces the
7/28/2019 1.6. Peeters
20/24
20
supplier to reveal cost breakdowns. It is obvious that suppliers prefer not to share all the
information, although respondents acknowledged that shared information could also be
useful. This counts especially for new product development, where involvement up to five
years before the launch of a new product is no exception. The cases indicate that the more
complex and the more expensive a part is, the more willingness exists to cooperate and to get
involved early. Early involvement is not a guarantee for a contract, although this is rather the
exception. Some respondents mentioned though that they were actively involved in pre-
production phases, but the production contracts were passed on to a competing firm. Product
lifetime contracts exist, but a slight modification of a specification means the cancellation of
the contract.
CONCLUSIONS AND FURTHER RESEARCH
The research findings of this pilot case study revealed important insights in the needs for
effective cost management in supply chains with respect to purchasing. Generally spoken,
themes referred to by literature are confirmed. Targets, set by the OEM are pushed through
the supply chain. The further away from the OEM, the more difficult it becomes to impose
cost targets to suppliers. The consequence is that first-tier suppliers become sandwiched
between the OEM, who focuses on targets, and second-tier suppliers, unable to comply with
the same targets. In this situation, the first tier-supplier is forced to cut down its own profit
margins to the absolute minimum. This implies a certain business risk, because it has been
contractually laid out, that changes in input prices are on the account of the first-tier supplier.
The results however, must be nuanced. Every cost calculation is based on case-specific
information. The more critical and specific a product is, the more attention is given to cost
calculations and target costing. Not only quality and pricing, but also the place seems to be
important. Suppliers of smaller and less complex parts have an advantage when they are not
situated on the green field of a car manufacturer. Lower transportation and packaging cost do
not always outweigh the additional cost of being part of a conveyor system.
The findings of this pilot case study revealed some insights in the needs for effective cost
management related to supply chain management. This will serve as guidance for future
research on the abovementioned topics by means of a large-scale case study and a survey.
This study is only based on a limited number of interviews. Although acknowledging that no
7/28/2019 1.6. Peeters
21/24
21
generalisations can be made, the trend appears to be that in the case of complex products,
more attention is given to cost management in supply chains and early supplier involvement
in new product development.
For future research on this topic, we suggest a longitudinal approach. Various respondents
indicated that concentration of OEMs will become eminent, while overcapacity becomes a
major issue. Many of the first-tier suppliers are part of international group production plants
worldwide. Few competitors remain here as well. The mergers of OEMs and the possible
closure of production plants will probably increase competition amongst suppliers of similar
products. The evolution of cost management in supply chains in this perspective will become
an interesting future research topic.
7/28/2019 1.6. Peeters
22/24
22
REFERENCES
Birou, L. M., Fawcett E. S. (1993), International Purchasing Benefits, Requirements and Challenges, Journal
of Purchasing and Materials Management, Vol. 29, No. 2, pp. 28-37.
Blanchard, B.S. (1978),Design and manage to Life-Cycle, M/A Press, Portland.
Carter, J. R., Narasimhan, R. (1990), Purchasing in the International Marketplace: Implications for Operations,
Journal of Purchasing and Materials Management, Vol. 26, No. 2, pp. 2-11.
Cooper, M.C., Ellram, L.M. (1993), Characteristics of supply chain management and the implications for
purchasing and logistics strategy,International Journal of Logistics Management, Vol. 4, No. 2, pp. 13-24.
Cooper M. C., Ellram, L. M., Gardner, J. T., Hanls, A. M. (1997), Meshing Multiple alliances, Journal of
Business Logistics, Vol. 18, No. 1, pp. 67-89.
Cooper, R., Chew, W.B. (1996), Control Tomorrows Costs Through Todays Designs, Harvard Business
Review, Vol. 74, No. 1, pp. 88-97.
Cooper, R., Slagmulder, R. (1997), Target Costing and Value Engineering, Productivity Press, Portland.
Cooper, R., Slagmulder, R. (2001), Supply Chain Development for the Lean Enterprise. The IMA Foundation for
Applied Research Inc., Productivity Inc., Portland.
Cooper, R., Yoshikawa, T. (1994), Inter-Organizational cost management systems: The case of the Tokyo-
Yokohama-Kamaruka supplier chain,International Journal of Production Economics, Vol. 34, No. 1, pp. 51-
62.
Das, A., Handfield, R. B. (1997), Just-in time and logistics in global sourcing: an empirical study,
International Journal of Physical Distribution & Logistics Management, Vol. 27, No. 3/4, pp. 244-259.
Debackere, K., De Backer, K. (1999), Clusterbeleid: Een innovatie instrument voor Vlaanderen? Reflecties opbasis van een analyse van de automobielsector,IWT observatorium, april 1999, i.s.m. Fabrimetal.
Dunning, J.H. (1993), Global businesses: The challenge of the 1990s. London and New York, Routledge.
Dobilas, G., Macpherson, A. (1997), Environmental regulation and international sourcing, Growth & Change,
Vol. 28, No. 1, pp. 7-23.
Eisenhardt, K. M. (1989), Building Theories from Case Study Research, Academy of Management Review,
Vol. 14, No. 4, pp. 532-50.
Ellram, L. M. (2002), Supply Managements involvement in the target costing process,European Journal of
Purchasing & Supply Management, Vol. 8, No. 4, pp. 235-244.
Everaert, P., Bruggeman, W. (1996), Target Costing: een overzicht van de literatuur, Economisch en Sociaal
Tijdschrift, Vol. 50, No. 1, pp. 87-122.
Gadde, Lars-Erik and Hkan Hkansson (2001), Supply Network Strategies. Chichester: John Wiley and Sons.
Hertenstein, J. H., Platt, M. B. (1998), Why Product Developments Teams Need Management Accountants,
Management Accounting, pp. 50-55.
7/28/2019 1.6. Peeters
23/24
23
Horngren, C. T., Foster, G., Datar, S. M. (1997), Cost Accounting: a managerial emphasis. 9th
Edition, Prentice
Hall, New Jersey.
Hsuan, J. (1999), Impacts of supplier-buyer relationships on modularisation in new product development,
European Journal of Purchasing & Supply Management, Vol. 5, No. 3, pp. 197-209.
Kaplan, R.S., Cooper, R. (1999), Cost & Effect. Using Integrated cost systems to Drive Profitability and
Performance, Harvard Business School Press, Boston.
Matthyssens, P., Martens, R., Vandenbempt K. (1998), Concurrentiestrategie en marktdynamiek, Kluwer
BedrijfsInformatie, Deventer.
McIvor, R. (2001), Lean supply: the design and cost reduction dimensions, European Journal of Purchasing
& Supply Management, Vol. 7, No. 4, pp. 227-242.
McMann, P. J., Nanni, A. J. Jr. (1995), Means versus ends: a review of the literature on Japanese management
accounting,Management Accounting Research, Vol. 6, No. 4, pp. 313-346.
Miles, M.B., Huberman A.M. (1994), Qualitative Data Analysis, 2nd
ed, Sage Publications, Thousand Oaks.
Monden, Y., Hamada, K. (1991), Target Costing and Kaizen Costing in Japanese Automobile Companies,
Journal of Management Accounting Research, Vol. 3, No. 3, pp. 16-34.
Murphy, P. R., Daley, J. M. (1994), Logistics issues in international sourcing: An exploratory study,
International Journal of Purchasing & Materials Management, Vol. 30, No. 3, pp. 22-27.
Murray, J. Y., Wildt A. R., Masaaki K. (1995), Global Sourcing Strategies of U.S. Subsidiaries of ForeignMultinationals,Management International Review, Vol. 35, No. 4, pp. 307-324.
Quayle, M. (1998), Industrial procurement: factors affecting sourcing decisions, European Journal of
Purchasing & Supply Management, Vol. 4, No. 4, pp. 199-205.
Rexha, Nexhmi and Tadayuki Miyamoto (2000), International Sourcing: An Australian Perspective, Journal
of Supply Chain Management, Vol. 36, No. 1, pp. 27-34.
Scannell, T.V., Vickery, S.K., Droge, C.L. (2000), Upstream supply chain management and competitive
performance in the automotive supply industry,Journal of Business Logistics, Vol. 21, No. 1, pp. 23-48.
Seal, W, Cullen, J., Dunlop, A., Berry, T., Mirghani, A. (1999), Enacting a European supply chain: a case study
on the role of management accounting,Management Accounting Research, Vol. 10, No. 3, pp. 303-322.
Seuring, S., Goldbach, M. (2002), Cost Management in Supply Chains, Physica-Verlag, Heidelberg New York.
Siau, C. (1999), The changing role of management Accounting and the Management Accountant in the
Company,Kwartaalschrift Accountancy & Bedrijfskunde, No.3, pp. 18-29.
Smith, W.I., Lockamy, A. (2000), Target Costing for Supply Chain Management: An Economic Framework,
The Journal of Corporate Accounting & Finance, Vol. 12, No. 1, pp. 67-77.
Trent, R.J., Monczka, R.M. (1998), Purchasing and Supply Management: Trends and Changes Throughout the
1990s.International Journal of Purchasing and Materials Management, Vol. 34, No. 4, pp. 2-11.
7/28/2019 1.6. Peeters
24/24
24
Tyndall, G., Gopal, C. (1998), Supercharging supply chains: New ways to increase value through global
operational excellence, John Wiley & Sons Inc, New York.
Van Weele, A. J. (2002), Purchasing and supply chain management: analysis, planning and practice, Thomson :
London.
Wouters, M.J.F. (1999), Supply Chain Management en bedrijfseconomische implicaties voor deelnemers,Maandblad voor Accountancy & Bedrijfskunde, Vol. 73, No. 11, pp. 578-589.
Wynstra, F., Van Weele, A, Weggemann, M. (2001), Managing Supplier Involvement in Product Development:
Three Critical Issues,European Management Journal, Vol. 19, No. 2, pp. 157-167.
Wynstra, F., Ten Pierick, E. (2000), Managing supplier involvement in new product development: a portfolio
approach,European Journal of Purchasing & Supply Management, Vol. 6, No. 1, pp. 49-57.
Yin, R. (1994), Case Study Research: Designs and Methods, 2nd
edition, Sage Publications, Beverly Hills.