+ All Categories
Transcript

+12V Constant = Blue/Red

+12v Acc. Switched = DATA

-12V Chassis Ground = Black/Blue

+12V Illumination = DATA

+12V Dimmer = DATA

Amp Remote = Yellow/Violet

LF+ = White

LF- = White/Brown

RF+ = White/Violet

RF- = White/Orange

LR+ = Brown/Green

LR- = Brown/Yellow

RR+= Brown/White

Dash Type: Double DINKit: FD1432ABHarness: FDSRAntenna Adapter: CRAB/CRARB

About the Vehicle

Make: FordModel: FusionYear: 2006-09

In Dash Application

Wire Color Codes

Speaker Notes

Front Speaker Sizes

Rear

Ford Fusion

RR- = Brown/Blue

NOTES

Speaker Sizes

Dimensions:

Dimensions: W= 4 7/8'' L= 6 3/4''D= 4 3/8''

NOTES

Rear Door : 6x8'' MidrangeRear Deck: 6x9'' in rear deck (w/Premium)Speaker Adapter: SA68Factory Assembly: (4) T-15 Torx screws securingspeaker.

OPTIONSMP3-compatible CD Audio controls on the steering wheelAudiophile 8 Speaker SystemIn-Dash 6 CD Changer

W= 4 7/8'' L= 6 3/4''D= 3 5/8''

Upper Door: 1'' TweeterLower Door: 6X8” MidrangeSpeaker Adapter: SA68Speaker Harness: TBAFactory Assembly: (4) T-15 Torx screws securingspeaker.

2006-09 Mercury Milan

Images

Front Speaker

Rear

Tweeter

Radio removal

Front Speaker

Rear Speaker

1. Unsnap tweeter pod from door using a PRT.Lift away disconnect and remove.

Tweeter Removal

1. Extract (2) T15 torx surrounding the perimeter of the door panel.2. Extract (1) 7mm hex screw located in the door handle pocket. Lift away disconnect and remove.3. Extract (1) T15 torx located in the doorhandle release cup.4. Using a PRT unsnap the perimeter of the door panel. Lift away disconnect and remove.5. Unsnap tweeter pod from door using a PRT.Lift away disconnect and remove.6. Extract (4) T15 torx securing factory speaker.Lift away disconnect and remove.

1. Extract (1) T15 torx surrounding the perimeter of the door panel.2. Extract (1) 7mm hex screw located in the door handle pocket. Lift away disconnect and remove.3. Extract (1) T15 torx located in the doorhandle release cup.4. Using a PRT unsnap the perimeter of the door panel. Lift away disconnect and remove.5. Extract (4) T15 torx securing factory speaker.Lift away disconnect and remove.

1. Using a panel removal tool remove the trimaround the radio.2. Remove the (4) 7mm screws holding the radio in place. Disconnect and remove

Radio

Ford Fusion2006-09 Mercury Milan


Top Related