STUDIO JOURNAL WEEK 10 ACITIVITY: ON ‘ SITE’ – OVAL PAVILLION SITE VISIT
OVAL PAVILLION
Reinforcing steel bars, which
are used as a tension to
increase the strength of
concrete conmmonly, in this
case it is retaining wall
LBL, the veneer of this type of timber has
only got one direction, which is different to
MDF, as it is more light and resistant.
Steel & Timber frame
structure
Four load-bearing columns
STUDIO JOURNAL WEEK 10
The shape of this kind of wood board
is ‘z’ shape, so the nail will be
screwed into under the ‘-‘, so that
when next board follows up the
other part of ‘z’ from the opposite
direction will cover the nailed part
up, hence the nails are hidden.
Scaffolding
Timber studs
Nogging
There is also a fixed bracing
on the other side of the wall,
which window plate goes in
after it is beenfixed
STUDIO JOURNAL WEEK 10
Steel lintel ‘Z’ shaped purlin is used for
construction rather than ‘c’ shaped,
as’ z ‘ shaped purlin can cross over by
connecting members from both sides.
However, ’c’ shaped purlin can only
have one side connection.
ROD BRACING
IS USED AS TENSION BRACE TO
REINFORCE THE ROOF, SO IT IS
MORE STABLE.
This kind of brickwork is done by pouring
grout into the hollow section and placing
the reinforcing steel bar into the hollow
section, finality, the whole brick wall will
be built up using cement to stick bricks
altogether.
STUDIO JOURNAL WEEK 10
TIMBER STUDS
NOGGING
MUNTINS
HEADER TOP RAIL
STILES
BOTTOM RAIL