2014 Xi’an Conference
1
2014 Xi’an Conference
2
TABLE OF CONTENTS
History of the ISMR .................................................................... 3
Welcome from Presidents ........................................................... 5
Award Committee ........................................................................ 8
Conference Schedule ................................................................... 9
Lecture Abstracts List ................................................................ 16
Poster Abstracts List .................................................................. 20
Workshop ................................................................................... 32
Invited Speakers ......................................................................... 33
Lecture Presentations ................................................................. 49
Poster Presentations………………………………………….. 83
2014 Xi’an Conference
3
HISTORY OF THE ISMR
In the late 1980’s John Beumer, Director of Maxillofacial Prosthetics
UCLA, Los Angeles, California, Ian Zlotolow, Director of Dental Service,
Department of Surgery, Memorial Sloan-Kettering Cancer Center, New
York, New York and Sal Esposito, Director of Maxillofacial Prosthetics at
the Cleveland Clinic, Cleveland, Ohio met and decided to conduct an
international symposium devoted to the art and science of maxillofacial
prosthetics. Seed money for this initial meeting was provided by their
respective institutions and by the Borchard Foundation. More than 400
individuals from more than 30 countries attended this initial conference.
The funds contributed by the Borchard Foundation were used to support
the travel and lodging expenses of 30 professionals from underdeveloped
countries.
The meeting was so successful and well attended that Beumer, Zlotolow
and Esposito formed an international organization devoted to
maxillofacial rehabilitation. They decided to conduct the meetings every
two years and to rotate them between North America, Europe and Asia.
The International Congress of Maxillofacial Prosthetics was then
established and incorporated in October of 1996.
As the organization developed, it was understood that professional groups
other than prosthodontists contributing to head and neck related care
wished to participate in the organization. In recognizing this and the need
to create an international organization that brought a diversity of
professional groups together, the organization was renamed the
International Society for Maxillofacial Rehabilitation (ISMR) on January
7th, 2002. In 2008 it was decided that the ISMR needed to be completely
restructured to reflect and embrace the interdisciplinary nature of head
and neck related care. The restructuring also needed to address
development of a future-oriented organization that actively engaged
involvement of the best young minds for the future. The decision was
also made that, as a fundamental principle, these best young minds
needed to be actively engaged in the operation of the ISMR.
2014 Xi’an Conference
4
The ISMR interest is in maxillofacial reconstruction and rehabilitation.
This interest is not restrictive and relates, in broad fashion, to head and
neck education, patient care, outreach and research. The ISMR
membership is drawn from the international clinical and research
community that has an interest in head and neck related care. The mission
of the ISMR is to advance interdisciplinary maxillofacial rehabilitation
throughout the world. The fundamental purpose of this mission is to
improve reconstructive and rehabilitative maxillofacial care with the aim
of improving quality of life of individuals needing care. The ISMR
delivers this mission through bringing support to professionals involved
in care, teaching and research. The ISMR is structured to be a fully
interdisciplinary organization that recognizes the importance of diverse
clinical and research disciplines embracing interdependency in their
respective roles. The ISMR is an inclusive organization that places
particular value on mutual respect of diverse disciplines in delivering
excellence in education, patient care, outreach and research.
2014 Xi’an Conference
5
WELCOME FROM PRESIDENTS
Dear colleagues:
On behalf of the International Society for Maxillofacial Rehabilitation
(ISMR) and the Chinese Society of Oral Maxillofacial Rehabilitation
(CSOMR), it gives me immense pleasure to welcome and thank you for
joining the 2014 ISMR Xi’an Conference.
This meeting prepares a three-day program(September 15-17), that will
provide all participants an opportunity to exchange knowledge, share
ideas and discuss the latest research break through and advances in
craniofacial reconstruction and maxillofacial rehabilitation. Our program
has also assembled a renowned list of speakers that challenge us to
confront the changing dynamics of our specialty.
We would like to take this opportunity to express sincere appreciation to
all committee members, supporting organizations, contributors, session
chairs, invited speakers, which made this meeting possible. Moreover, a
large number of abstracts from all over the world were able to be received
thanks to the wonderful support and efforts given by the international
committee members.
Finally, we sincerely wish you a happy and pleasant stay in Xi’an
attending the conference. Thank you.
Yimin Zhao, Ph.D, D.D.S, Professor
President of 2014 ISMR Xi'an Conference
President of Chinese Society of Oral Maxillofacial Rehabilitation (CSOMR)
Honorary President of International Society for Maxillofacial Rehabilitation (ISMR)
President of Fourth Military Medical University
2014 Xi’an Conference
6
Dear colleagues:
It is with great pleasure and honour to welcome all delegates to the 2014
Xi’an conference of the International Society for Maxillofacial
Rehabilitation (ISMR).
The ISMR aims to be the preeminent interdisciplinary international
organization in maxillofacial rehabilitation; ‘advancing head and neck -
maxillofacial rehabilitation together’, through leadership, education, and
outreach. One important goal set by the board was to reach out to
locations throughout the world where traditionally the ISMR was not
well-represented. Therefore, the ISMR is very pleased to be able to
partner in the organization of the 2014 Xi’an conference of the ISMR in
China.
Much gratitude is owed to the faculty of the School of Stomatology of the
Fourth Military Medical School in Xi’an, especially to its President - Prof.
Yimin Zhao, also President of the Chinese Society of Maxillofacial
Rehabilitation (CSOMR), and Dr. Guofeng Wu who took the initiative
and lead in the organization of this great international event in China, in
cooperation with Prof. John Beumer III of the Foundation for Oral-facial
Rehabilitation.
This resulted in a strong and exciting lecturing program, with renowned
presenters from all over the world, representing many disciplines within
maxillofacial rehabilitation in head and neck cancer, cleft patients care,
and for other congenital conditions. Updates and advances in surgical
reconstruction, in the use of digital technology, implant support for
prostheses, functional aspects of rehabilitation, and many other topics
including basic sciences will be addressed.
An overwhelming amount of over 180 poster presentations are enlisted in
the program so far, showing the enormous interest for this great meeting
and eagerness to share knowledge.
For sure, this conference will offer its participants a wealth of educational
opportunities, but also a great opportunity to meet colleagues and start /
maintain relationships. All of these are of great importance to enhance
maxillofacial rehabilitation and our patient’s care.
I wish you all a wonderful meeting in Xi’an and look forward meeting
2014 Xi’an Conference
7
you.
Harry Reintsema, Ph.D, D.D.S,
President of International Society for Maxillofacial Rehabilitation (ISMR)
2014 Xi’an Conference
8
AWARD COMMITTEE
Yongsheng Zhou, Beijing, CHINA
Yan Li, Guangzhou, CHINA
Weihong Ren, Beijing, CHINA
Karl Lyons, Otago, NEW ZEALAND
Doog-Hoo Han, Seoul, SOUTH KOREA
Balasubramanian Srinivasan, Pune, INDIA
Ben Wu, Los Angeles, USA
Kanchan Dholam, Mumbai, INDIA
2014 Xi’an Conference
9
CONFERENCE SHEDULE
14-Sept-2014
8:00-21:00 Registration
15:30-17:00 Visiting School of Stomatology, Fourth Military Medical University (Free of charge)
19:00-21:00 Cocktail Reception (Fee required)
15-Sept-2014
8:30-9:00 Opening ceremony
Chair: Prof. Yongsheng Zhou & Prof. Robert Taft
9:00-9:45 Digital time in the Maxillofacial Rehabilitation Yimin Zhao,
Fourth Military Medical University, School of Stomatology, China
9:45-10:15 Overdentures on primary mandibular implants in patients with
oral cancer: a follow-up study over 14 years
Harry Reintsema,
University Medical Centre Groningen, University of Groningen, The
Netherlands
10:15-10:30 Coffee break
Poster Session (Award competition) and Exhibit Reception
Chair: Prof. Jianong Yang & Prof. Harry Reintsema
10:30-11:00 Color stability of silicone maxillofacial elastomers: a summary
of 15-year research experience
Sudarat Kiat-amnuay,
University of Texas School of Dentistry at Houston, USA
11:00-11:30 Maxillofacial rehab in India: The 2006-2014 experience Balasubramanian Srinivasan
Enhance Head Neck Rehabilitation, India
11:30-12:00 The diagnosis and treatment of dysphagia Ruiying Ding,
Elmhurst College, USA
12:00-13:30 Lunch (Fee required)
Session I – Advanced Digital Technologies and Maxillofacial Rehabilitation
2014 Xi’an Conference
10
Chair: Prof. Zhengjun Shang & Prof. Doog-hoo Han
13:30-14:15 Digital technologies in maxillofacial rehab and reconstructive
surgery
Robert Taft & Gerald T Grant,
National Naval Medical Center, USA
14:15-14:25 Development and progress of craniomaxillofacial reconstruction
Zhigang Cai, Peking University School & Hospital of Stomatology, Beijing, China
14:25-14:35 Direct 3D printing of silicone Swati Jindal,
King's College London, UK
14:35-14:45 Rehabilitation of maxillectomy defects with CAD-RP obturator prostheses: A pilot study
Ting Jiao, 9thPeople’s Hospital, Jiaotong University, Shanghai, China
14:45-14:55 Digital clinical solution of Presurgical Nasoalveolar Molding
(PNAM) for infant clefts in FMMU
Guofeng Wu,
Fourth Military Medical University, School of Stomatology, China
14:55-15:05
Combined prosthodontic and surgical management of
patients with amelogenesis imperfecta: case series of two
patients
Ben I Omondi,
University of Nairobi, Kenya
15:05-15:15 Preoperative percutaneous nerve mapping of the mandibular marginal branch of the facial nerve
Bo Lin
Peking University School of Stomatology, China
15:15-15:30 Coffee break
Chair: Prof. Ting Jiao & Prof. Balasubramanian Srinivasan
15:30-15:40 Digital technology used in rehabilitation of maxillofacial defects
Xiaoyu Gu, 9thPeople’s Hospital, Jiaotong University, Shanghai, China
15:40-15:50 Development of the combined finite-element and rigid-body
analysis model for the maxillofacial prosthodontics
Ho Beom Kwon,
Seoul National University, Republic of Korea
15:50-16:00 The evaluation of measurement accuracy of two different 3D face-scanner on healthy human faces
Hongqiang Ye, Peking University School of Stomatology, China
16:00-16:10 Application of computer aided technique in the rehabilitation
of complicate oral-maxillofacial defect and deform
Shizhu Bai,
Fourth Military Medical University, School of Stomatology, China
Session II – Implants and Maxillofacial Rehabilitation
2014 Xi’an Conference
11
16:10-16:20 Implant system using precision surgical guide for maxillofacial
prosthesis
Young-Bum Park,
Yonsei University College of Dentistry, Republic of Korea
16:20-16:50 A Case of Fixed Prosthesis with Autologous Ilium Bone Free
Graft Auxiliary GBR to Restore Severe Defects of Maxillary
Sefei Yang, Chinese PLA General Hospital, China
16:50-17:00 Immediate implant-retained prosthesis following radical maxillectomy
Guiqing Liao
Guanghua School of Stomatology, Hospital of Stomatology, Sun Yat-Sen University, China
17:00-17:10 Effects of titanium-nanotubes surface modified by estrogen-loaded solid lipid nano-particles: an in vitro study
Yan Gao, Guangdong Provincial Stomatological Hospital, Southern Medical University, China
17:10-17:20 The use of zygomaticus implants in the compromised patient:
review and patient report
Jay Jayanetti,
Louisiana State University School of Dentistry, USA
17:20-17:30
Implant-supported intraoral prostheses retained by bar-clip
attachment following distraction osteogenesis after block
resection of mandible in a case of squamous cell carcinoma
of the floor of the mouth
Chunbo Tang, Stomatological Hospital of Nanjing Medical University, China
17:30-17:40 Fabrication of Surgical Templates for Orbital Implant
Placements and orbital rehabilitation
Songling Chen,,
The first affiliated hospital of Sun Yat-sen University, Guangzhou,
China
18:10-19:30 Conference welcome and awards banquet (Fee required)
16-Sept-2014
Chair: Zhengxue Han & Vojkan Lazic
8:30- 9:15 Microsurgical Free Flap Reconstructionsof Head and Neck
Region: Shanghai Experience of 34 years
Chenping Zhang,
The Ninth Affiliated Hospital, Shanghai Jiao Tong University, China
9:15- 9:45 Dental implant for oral tumor patients Joji George Sekine,
Shimane University Faculty of Medicine, Japan
9:45-10:15 Functional Reconstruction maxillary defects after ablative
surgery
Jian Sun,
The Ninth Affiliated Hospital, Shanghai Jiao Tong University, China
2014 Xi’an Conference
12
10:15-10:30 Coffee break
Chair: Yi Lu & Kanchan P. Dholam
10:30-11:00 Implants for pediatric patients: growth and implant placement Arun Sharma,
University of California, San Francisco, USA
11:00-11:10 ALT flap in the reconstruction of defects in head and neck
region
Jianhua Wei,
Fourth Military Medical University, School of Stomatology, China
11:10-11:20 35 years with osseointegrated facial prostheses – history &
developments
Kerstin Bergstrom,
Sahlgrenska University Hospital, Sweden
11:20-11:30 Preliminary analysis on free flap re-exploration– Beijing’s experience
Lei Zhang, Peking University School and Hospital of Stomatology, China
11:30-11:40 Facial prostheses retained on basally osseointegrated
implants (BOI)
Vojkan Lazić,
University of Belgrade, Serbian
11:40-11:50 Long-term result of reconstruction of mandible continuity with fibula free flap and implant borne dental rehabilitation
Wei Fang, Fourth Military Medical University, School of Stomatology, China
11:50-12:00
Sub-periosteal dissection with denture-guided secondary
epithelialization: case series of a novel method for peri-
implant tissue management in reconstructed mandibles
PC Jacob,
Mazumdar Shaw Medical Center, Bangalore, India
12:00-13:30 Lunch (Fee required)
Session III - Tissue Engineering and Maxillofacial Rehabilitation
Chair: Weihong Ren & Arun Sharma
13:30-14:15 Recent Advances in Craniomaxillofacial Tissue Engineering Ben Wu,
University of California, Los Angeles, USA
14:15-14:25 Cell homing strategy for bone tissue engineering based on the cooperative actions of simvastatin and SDF-1α - a potential application in maxillofacial rehabilitation.
Yongsheng Zhou, Peking University School of Stomatology, China
14:25-14:35 Human freeze-dried dentin matrix as a biologically active scaffold for tooth tissue engineering
Fang Wang, Fourth Military Medical University, School of Stomatology, China
2014 Xi’an Conference
13
14:35-14:45 Comparison of tissue engineered bone substitutes for native
bone augmentation -An in vivo study
Vijayalekshmi Manju,
Amrita School of Dentistry, Amrita Institute of Medical Sciences,
India
14:45-14:55
Mechanism of human oral facial fibro-osseous disease and in
vivo mouse model development based on disease-specific
iPSCs
Haiyan Qin
Stomatological Hospital Affiliated Medical School, Nanjing University,
China
14:55-15:05 The effect of a novel HDAC3-selective inhibitor on osteogenic induction of human adipose derived stem cells
Wei Lu, The 461 Hospital of PLA, Changchun, China
15:15-15:30 Coffee break
Chair: Zhigang Cai & Ho Beom Kwon
15:30-15:40 Physicochemical properties and in vitro mineralization of porous polymethylmethacrylate cement loaded with calcium phosphate particles for bone reconstruction.
Yue Sa, Hospital of Stomatology, Wuhan University, China
15:40-15:50 Study on construction and biological effects of lipopolysaccharide-amine nano-polymersomes/ hyaluronic acid polyelectrolyte films on titanium surface
Teng Wei, Guanghua School of Stomatology, Hospital of Stomatology, Sun Yat-Sen University, China
Session IV – Miscellaneous topics in Maxillofacial Rehabilitation
15:50-16:20 Effect of early stage dent-maxillary prosthesis in the
rehabilitation of maxillectomy patients
Takahiro Ono,
Osaka University Graduate School of Dentistry, Japan
16:20-16:30
The impact of oral rehabilitation on head and neck cancer
patients by Liverpool oral rehabilitation questionnaire
(LORQv3) along with oral health impact profile (OHIP-14)
Gunjan Chouksey,
Tata Memorial Hospital, India
16:30-16:40 Meticulous reconstruction of oral and maxillofacial soft tissue defects after tumor ablation — the principle, method, and reconstructive efficacy
Hanjiang Wu, The Second Xiangya Hospital, Central South University, China
16:40-16:50 Unique prosthetic support for the extended oncologic team
members
James A. Kelly,
Mayo Clinic College of Medicine, USA
2014 Xi’an Conference
14
16:50-17:00
Correction of mandibular deviation by combination therapy of
maxillary ramp prosthesis (MRP) and mandibular guide
flange prosthesis (MGFP) in mandibular defect case.
Nafij Bin Jamayet,
School of Dental Science, Universiti Sains Malaysia, Malaysia
17:00-17:10 Saving faces changing lives
Bilal Ahmed,
National University of Science & Technology (NUST), Islamabad.
Pakistan
18:30-22:00 Elective Social Outing / Xi’an night tour (Fee required,
please contact the local travel agency onsite)
17-Sept-2014
Chair: Hongjun Ai & James A. Kelly
8:30- 9:00 Microbial adhesion to maxillary obturator prostheses Karl Lyons,
University of Otago, New Zealand
9:00- 9:10 Improvement of swallowing and articulation by using palatal
augmentation prosthesis in a semi-total glossectomy patient.
Yoshitomo Minagi,
Osaka University Graduate School of Dentistry, Japan
9:10- 9:20 The 3-stage therapeutic process of a sequence obturators for maxillectomy: a case report
Yan Li, GuanghuaShool of Stomatology, Hospital of Stomatology, Sun Yat-Sen University, China
9:20- 9:30 Three-dimensional Finite Element Analysis of Obturator
Retained with Anterior Attachment in Maxilloectomy Patients
Yanyi Wang,
Chinese PLA General Hospital, China
9:30- 9:40 NAM appliance design utilizing a new geometric format Jeff Rodney (Present by Ting-Ling Chang)
University of Michigan, USA
9:40- 9:50 The clinical experience of the oral prosthodontic treatment in cleft lip and palate patients
Guofang Xing, 9th People’ Hospital, Shanghai JiaoTong University School of Medicine, China
9:50-10:00 Maxillofacial rehabilitation – challenges and opportunities Bhaskar Agarwal,
King George's Medical University, India
2014 Xi’an Conference
15
10:00-10:15 Coffee break
Chair: Yan Li & Karl Lyons
Session V – Chemo-radiation – Morbidities and strategies to minimize them
10:15-11:00 Head and neck cancer therapy. Oral complications and
potential management techniques.
Eric C. Sung,
University of California, Los Angeles, USA
11:00-11:10
Multifunctional nanoparticles based on molecular recognition
for cancer cell targeting and traceable intracellular drug
delivery
Guolin Li,
The First Affiliated Hospital of Harbin Medical University, China
11:10-11:20 Effect of radiotherapy and chemotherapy on the quality of life
in nasopharyngeal carcinoma patients: A pilot study
Khim H Teoh,
National Dental Centre, Singapore
11:20-11:30 The negative effects of postoperative radiation on the rehabilitation of maxillary defect patients
Weihong Ren, Capital Medical University, China
11:30-12:10 Closing remarks –Prof. Yimin. Zhao and Prof. John Beumer
III
12:10-13:30 Lunch (Fee required)
13:30-15:00 Visiting School of Stomatology, Fourth Military Medical University (Free of charge)
Workshop
14:00 – 17:00
• “Use of Advanced Digital Technologies in restoration of facial defects” – Combined lecture and hands on lab
Instructors – Dr. Shizhu Bai, FMMU, China (Site – FMMU,13:30 boarding bus on the Sofitel hotel gate, registration required)
2014 Xi’an Conference
16
LECTURE ABSTRACTS LIST
Abstract
1
Author
Zhao Yimin
Title
Digital Time in the Maxillofacial Rehabilitation
2 Harry Reintsema Overdentures on Primary Mandibular Implants in Patients with Oral Cancer: a Follow-up Study Over 14
Years
3 Sudarat Kiat-amnuay Color Stability of Silicone Maxillofacial Elastomers: A Summary of 15-Year Research Experience
4 Balasubramanian Srinivasan Maxillofacial Rehab Marching Ahead in India: 2006-2014 Experience
5 Ding Ruiying The Diagnosis and Treatment of Dysphagia
6 Robert Taft , Gerald T Grant Digital Technologies in Maxillofacial Rehab and Reconstructive Surgery
7 Young-Bum Park Implant System Using Precision Surgical Guide for Maxillofacial Prosthesis
8 Zhang Chenping Microsurgical Free Flap Reconstructionsof Head and Neck Region: Shanghai Experience of 34 years
9 Joji George Sekine Dental Implant for Oral Tumor Patients
10 Sun Jian Functional Reconstruction Maxillary Defects After Ablative Surgery
11 Arun Sharma Implants for Pediatric Patients: Growth and Implant Placement
12 Ben Wu Recent Advances in Craniomaxillofacial Tissue Engineering
13 Takahiro Ono Effect of Early Stage Dent-maxillary Prosthesis in the Rehabilitation of Maxillectomy Patients
14 Karl Lyons Microbial Adhesion to Maxillary Obturator Prostheses
15 Eric Sung Head and Neck Cancer Therapy. Oral Complications and Potential Management Techniques..
16 Cai Zhigang Development and Progress of Craniomaxillofacial Reconstruction
17 Swati Jindal Direct 3D Printing of Silicone
18 Jiao Ting Rehabilitation of Maxillectomy Defects with CAD-RP Obturator Prostheses: A Pilot Study
19 Wu Guofeng Digital Clinical Solution of Presurgical Nasoalveolar Molding (PNAM) for Infant Clefts in FMMU
2014 Xi’an Conference
17
20 Ben Omondi Combined Prosthodontic and Surgical Management of Patients with Amelogenesis Imperfecta: Case Series
of Two Patients
21 Lin Bo Preoperative Percutaneous Nerve Mapping of the Mandibular Marginal Branch of the Facial Nerve
22 Gu Xiaoyu Digital Technology Used in Rehabilitation of Maxillofacial Defects
23 Ho Beom Kwon Development of the Combined Finite-element and Rigid-body Analysis Model for the Maxillofacial
Prosthodontics
24 Ye Hongqiang The Evaluation of Measurement Accuracy of Two Different 3D Face-scanner on Healthy Human Faces
25 Bai Shizhu Application of Computer Aided Technique in the Rehabilitation of Complicate Oral-Maxillofacial Defect
and Deform
26 Yang Sefei A Case of Fixed Prosthesis with Autologous Ilium Bone Free Graft Auxiliary GBR to Restore Severe
Defects of Maxillary
27 Liao Guiqing Immediate Implant-retained Prosthesis Following Radicalmaxillectomy
28 GaoYan Effects of Titanium-nanotubes Surface Modified by Estrogen-loaded Solid Lipid Nano-particles: An Invitro
Study
29 Jay Jayanetti The Use of Zygomaticus Implants in the Compromised Patient: Review and Patient Report
30 Tang Chunbo Implant-Supported Intraoral Prostheses Retained by Bar-Clip Attachment Following Distraction
Osteogenesis after Block Resection of Mandible in A Case of Squamous Cell Carcinoma of the Floor of the
Mouth
31 Chen Songling Fabrication of Surgical Templates for Orbital Implant Placements and Orbital Rehabilitation
32 Wei Jianhua ALT Flap in the Reconstruction of Defects in Head and Neck Region
33 Kerstin Bergstrom 35 Years with Osseointegrated Facial Prostheses – History & Developments
34
Zhang Lei
Preliminary Analysis on Free Flap Re-exploration– Beijing’s Experience
35 VojkanLazić Facial Prostheses Retained on Basally Osseointegrated Implants (BOI)
36 Fang Wei Long-term Result of Reconstruction of Mandible Continuity with Fibula Free Flap and Implant Borne
Dental Rehabilitation
37
PC Jacob
Sub-periosteal Dissection with Denture-Guided Secondary Epithelialization: Case Sereis of A Novel
2014 Xi’an Conference
18
Method for Peri-Implant Tissue Managementin Reconstructed Mandibles
38 Zhou Yongsheng Cell Homing Strategy For Bone Tissue Engineering Based on the Cooperative Actions of Simvastatin and
SDF-1α-a Potential Application in Maxillofacial Rehabilitation
39 Wang Fang Human Freeze-dried Dentin Matrix As a Biologically Active Scaffold for Tooth Tissue Engineering
40 Vijayalekshmi Manju Comparison of Tissue Engineered Bone Substitutes for Native Bone Augmentation -An in Vivo Study
41 Qin Haiyan Mechanism of Human Oralfacial Fibro-osseous Disease and in Vivo Mouse Model Development Based on
Disease-specific iPSCs
42 Lu Wei The Effect of a Novel HDAC3-selective Inhibitor on Osteogenic Induction of Human Adipose Derived
Stem Cells
43 Sa Yue Physicochemical Propertiesand in Vitromineralization of Porous Polymethylmethacrylatecement Loaded
with Calcium Phosphate Particles for Bone Reconstruction
44 Teng Wei Study on Cnstruction and Biological Effects of Lipopolysaccharide-amine Nano-polymersomes/ Hyaluronic
Acid Polyelectrolyte Films on Titanium Surface
45 KanchanDholam The Impact of Oral Rehabilitation on Head and Neck Cancer Patients by Liverpool Oral Rehabilitation
Questionnaire (LORQv3) Along with Oral Health Impact Profile (OHIP-14)
46 Wu HanJiang
Meticulous Reconstruction of Oral and Maxillofacial Soft Tissue Defects After Tumor Ablation—the
Principle, Method, and Reconstructive Efficacy
47 James A. Kelly Unique Prosthetic Support for the Extended Oncologic Team Members
48 Nafij Bin Jamayet Correction of Mandibular Deviation by Combination Therapy of Maxillary Ramp Prosthesis (MRP) and
Mandibular Guide Flange Prosthesis (MGFP) in Mandibular Defect Case
49 Bilal Ahmed Saving Faces Changing Lives
50 Yoshitomo Minagi Improvement of Swallowing and Articulation by Using Palatal Augmentation Prosthesis in a Semi-total
Glossectomy Patient
51 Li Yan The 3-stage Therapeutic Process of a Sequence Obturators for Maxillectomy: a Case Report
52 Chu Xiaoyang Three-dimensional Finite Element Analysis of Obturator Retained with Anterior Attachment in
Maxilloectomy Patients
53 Jeff Rodne NAM Appliance Design Utilizing A New Geometric Format
2014 Xi’an Conference
19
54 Xing Guofang The Clinical Experience of the Oral Prosthodontic Treatment in Cleft Lip and Palate Patients
55 Bhaskar Agarwal Maxillofacial Rehabilitation – Challenges and Opportunities
56 Li Guolin Multifunctional Nanoparticles Based on Molecular Recognition for Cancer Cell Targeting and Traceable
Intracellular Drug Delivery
57 Teoh KH Effect of Radiotherapy and Chemotherapy on the Quality of Life in Nasopharyngeal Carcinoma Patients: A
Pilot Study
58 Ren Weihong The Clinic Observation of the Affection of Postoperative Radiation Therapy on the Rehabilitation of
Maxillary Defect Patients
2014 Xi’an Conference
20
POSTER ABSTRACTS LIST
Session I – Advanced Digital Technologies and Maxillofacial Rehabilitation
1 Yan Haixin Rehabilitation of Prefabricated Hollow Obturator Prosthesis in Maxillary Sinus Carcinoma Operation:11
Cases Report
2 Didier Maurice Computerized Project for Reconstruction Surgery, Implantology and Prosthetic Rehabilitation in Mandibular
Defect
3 Dai Tong The Clinical Application of Computer-aided Designing and Manufacturing of Defected Maxilla Cast
4 Gu Bin Effects of Three Types of Veneering Porcelain on Bending Strength of KAVO™ Y-TZP/porcelain Bilayered
Structure
5 Feng Xin Comparative Analysis of the Upper Airway Volume Using Lateral Cephalogram and Cone-beam Computed
Tomography
6 Jing Qiu The Study of Computer-aided Design for a Facial Prosthesis Using Three-dimensional (3D) Registration
Technology
7 LI Binghong Magfit-attachment-linked Sectional Obsturator and Prosthesis for Maxillary Defects and Placket Restricted
8 Li Chuanjie Retrospective Clinical Study on the Application of Magnetic Attachment in Maxillofacial Prosthesis
9 Elbashti Mahmoud Acoustic Characteristics of Vowels in Trismus Simulated Condition
10 Li Zhimin Application Value Comparision of Cone Bean CT and Spiral CT in Jaw Defect Three-dimensional
Reconstruction
11 Liao Muying The Three-dimensional Finite Elements Analysis of Different Rate of Clinical Crown-Root and Width of
Marginal Alveolar Bone of Maxillary Central Incisor
12 Sun Bin Application of Computer-Assisted Design and 3D-model in mandibular reconstruction by free fibular flap
13 Sun Jian Biomechanical Design and Fabrication of the Model of the Individual Mandibular Titanium Framework
14 Shang Wei Clinical Application of Submental Island Flap on Repairing Oropharynx Defects after Cancer Ablation
15 Zheng Yaqi Pre-surgical Nasal Molding for Infants with Unilateral Cleft Lip and Palate Using Multiple Digital Techniques
2014 Xi’an Conference
21
16 Zhou Yongsheng Acquisition of 3-dimensional Digital Models of Maxillary Defects Based on Multisource Data
17 Hou Yuezhong Inflatable Hollow Obturator Prostheses for Patients Undergoing an Extensive Maxillectomy
18 Liang Yujie Mandible Reconstruction Assisted by Preoperative Simulation and Transferring Templates: Cadaveric Study of
Accuracy
19 Zhang GS Mandible Reconstruction Assisted by Preoperative Virtual Surgical Simulation
20 Zheng Guangsen Mandibular Reconstruction Assisted by Preoperative Simulation and Accurate Transferring Templates:
Preliminary Report of Clinical Application
21 Huang Zhi Novel Method of Fabricating Individual Trays for Maxillectomy Patients by Computer-Aided Design and
Rapid Prototyping.
22 Xie Rui The Significance of NHP to the Orbital Prosthesis Fabricated by Computer-aided Design and Computer-aided
Manufacturing (CAD/CAM)
23 Gao Rui Dose Study of LDCT Application to Reconstruct 3D Model of the Maxillofacial Hard and Soft Tissues
24 Zhang Leiqing 3D Printing Technology and Its Application in Oral and Maxillofacial Treatment
25 Wang Bo Computed Tomography Measurement of the Auricle in Han Population of North China
26 Dong Yu A Pilot Study on the Orientation of 3-dimensional Facial Images to Natural Head Position (NHP)
2014 Xi’an Conference
22
Session II – Implants and Maxillofacial Rehabilitation
1 Arun Sharma The UCSF Experience with Zygomatic Implants for Maxillary Defects
2 Gassino G Facial Defects: Alteration at Surgery to Enhance the Prosthetic Prognosis
3 Lee Bora Rehabilitation of Patients with Reconstructed Mandible Using Implant-supported Prostheses
4 Chen Cheng Application of Implant-supported Overdenture with Locator Attachment in an Edentulous Patient after
Hemimaxillectomy: a Case Report
5 Wang Chen The Application of Silicone Lining Obturator in Single Maxillary Prostheses
6 Yan Fei The Effect of Different Root Canal Internal Surface Treatment on Bond Strength of Quartz Fiber Post
7 Bassi F Post Rhinectomy Rehabilitation by Means of an Epithesis
8 Liao Guiqing Immediate Implant-retained Prosthesis Following Radical Maxillectomy
9 Wei Hongbo Microporous Pattern Fabricated by Microelectromechanical Systems Improved Fibroblast Functionalities on
Titanium Surface
10 Huang Cui Changes in Serum of Bone Regeneration of Antibacterial Nanocomposite Membrane in vivo
11 Sharad Gupta Osseointegrated Implants Supported Bar and O-ring Combination Prosthesis post Mandibular Resection
12 Ma Kena Synthesis and Properties of Sr/CS/G Coatings Fabricated via Electrophoretic Deposition
13 Hu Jian Application of Obturator Combining Casting Frame in Cystic Lesions of the Jaws
14 Li Ming Using the Folded Fibula Flap and Dental Implants to Repair Mandibular Defects at the Same Period
15 Liu Xiaofang Clinical Evaluation of Prostheses Retained by Tooth-implant and Natural Teeth Combined with Extracoronal
Magnetic Attachments for Unilateral Mandibular Defects
16 Liu Changying To Reconstruct Attached Soft Tissue around Dental Implants by Acelluar Dermal Matrix Grafts and Resin
Splint
17 Ma Pan The Pickup Technique Combined with Surgical Guide Template on the Immediate Fixed Restoration in the
Rehabilitation of Complete Edentulous Jaws
18 Wu Yiqun Functional Reconstruction of Maxillary Defect with Zygomatic and Conventional Dental Implants after Tumor
Resection
19 Liao Guiqing Reconstructed the Completed Mandible Defect with Bilateral Fibula Grafts and Dental Implantation
20 Neal Garrett Efficacy of Implant-supported Maxillofacial Prosthetics
21 Nicholas Goetz Use of Implants to Retain Facial Prostheses: the UCLA Experience.
2014 Xi’an Conference
23
22 Paolo Pera Pulsed Electromagnetic Fields Effects on Swelling and Pain after Implant Surgery: a Double-blind,
Randomized Study
23 Shan Xiaofeng Mandibular Defect Reconstruction with Fibula Flap and Non-vascularized Fibula Bone
24 Song Guangbao 4 Implant-supported Bridge for Mandibular Defects with Vascularized Fibular Osteomyocutaneous Flap
25 Tetsuo Ohyama The Effectiveness of Implant Overdenture Treatment for the Severe Bone Resorption case
26 Wang Ying The Effect of Different Doses of Radiation on the Rat Osteoblasts in Vitro
27 Xu Shulan Study of Coralline Hydroxyapatite Blocks Used in Reconstructing Alveolar Bone Height in Posterior Mandible
28 Xuan Yue Review of Implant Outcomes on Fibula Free-flap Reconstruction for the Resected Mandible
29 Wang Yichen Effect of Pore Size and Porosity on Cytocompatibility of Porous NiTi Alloys
30 Zhang Lei Survival, Functions, and Complications of Oral Implants Placed in Bone Flaps in Jaws Rehabilitation-a
Systematic Review
31 Zheng Jie A Clinical Evaluation of the Implantodontical Obturator Prostheses for Maxillary Defects
32 Wang Zhongshan Mussel Adhesive Proteins/ Platelet-rich Plasma Composite-Coated Titanium Surfaces Increased Functionality
of Dermal Fibroblasts
33 Zhou Wei What Type of Implants Used for the Irradiated Bone Is the Better: Zirconia or Titanium Implants?
34 Dong Yan The Study of Bi-lineage Differentiated ADSCs Sheet to Improve Implant Osseointegration in the Irradiated
Bone
35 Ren Nan Biological Characteristics of Osteogenic and Angiogenic Bi-lineage Differentiated ADSCs Sheet-implant
Complex
36 Minati Choudhury Auricular Rehabilitation Using Early Loaded Intraoral Endosseous Implants: a Case of Bilateral Anotia
2014 Xi’an Conference
24
Session III - Tissue Engineering and Maxillofacial Rehabilitation
1 Gao Bo A Novel Nano-Bilayer Collagen/Chitosan Composite Membrane for Guided Bone Regeneration
2 Cheng Lin Segmental Mandibular Defect Reconstruction Using Prefabricated Bone-implant Grafts or Autogenous Bone
Grafts with Simultaneous Implantation: an Experimental Study in Dogs
3 Jiang Hua Analysis of Brain Activity in Patients with Chewing-Side Preference During Chewing: An FMRI study
4 Liu Jiarong Comparison of EGF and bFGF Expression in Vivo and Their Effect in Vitro
5 Lu Xuguang Great Auricular Nerve Grafting in The Treatment of Facial Palsy in Parotid Tumor Surgery
6 Pang Danlin Effects of Aqueous Areca Nut Extract on The Level of Endothelin-1 Secreted by Endothelial Cells
7 Sharmila Hussain Morindacitrofolia Enhances Bone Marrow Mesenchymal Stem Cell Proliferation and Facilitates Osteogenesis
8 Zhang Yufeng Evaluation of a Critical Size Calvarial Defect in the SAMP6 Steoporosis Mouse Model
9 Zhipei Chen Fabrication and Cell Compatibility Evaluation of Pure Titanium Coated with Sustained Release System of
BMP-2/ Biomimetic Calcium Phosphate
10 Zhen Zhang Electrophoretic Deposition of Amoxicillin Silk Fibroin Coatings for Functionalization of Titanium Surfaces
11 Gou Liming Effects of Acellular Dermis Matrix for The Prevention of Gustatory Sweating Syndrome After Parotidectomy:
A Systematic Review Based on Randomized Controlled Trials
12 Lei Zhang Preliminary Analysis on Free Flap Re-exploration-Beijing’s Experience
13 Dong Xixi The Effect on Induced Pluripotent Stem Cell of The Extract of Akermanite in Vitro
14 Li Yanan Comparision of The Effects of Different Occlusal Reconstruction on Partial Mandibular Bone Defect Patients
15 Ding Yumei IL-22 Mediates Oral Mucosal Wound Healing Via STAT3
16 Ba Ruikai Cell-bricks Based in Jectable Niche Guided Persistent Ectopic Chondrogenesis of BMSCs and Enabled Nasal
Augmentation
2014 Xi’an Conference
25
Session IV – Miscellaneous topics in Maxillofacial Rehabilitation
1 Abdel Raheem Bibars Effect of Thixotropic Agent on Physical Properties of Facial Silicone Elastomer
2 Bai Bing Conventional Prosthodontic Management with Attachment-retained Overdenture in Ⅱ Class Defects of
Maxilla Patients
3 Sun ChangFu Yu’s Flap For Lower Lip and Reverse Yu’s Flap for Upper Lip Reconstruction: 20 years experience
4 Chen Qiang The Total Lower Lip Reconstruction after Squamous Cell Carcinoma Resection
5 Liu Yang Application of Retentive Techniques in The Restoration of Maxillary Defects
6 Fang Su A Study of Computer Color Matching of Silicone Elastomer Based on Artificial Neural Networks
7 Fumi Yoshioka Clinical Trial of Novel Silicone Materials for Facial Prostheses
8 Gao Jianyong Application of Vacuum Sealing Drainage (VSD) in Maxillofacial Complex Wound
9 Gong Zhaojian
Chimeric Flaps Pedicled with Lateral Circumflex Femoral Vessel for Individualized Reconstruction of
Through-and-through Oral and Maxillofacial Defects
10 Guo Ling Application of PFM Crowning Techniques To Restore Multiple Adult Stuck Teeth with Large Scattered
Clearance
11 Yang Huochuan Experience of Clinical Details in Restoration for Unilateral Maxillary Defect with Maxillary Obturator
12 Jee Hwan Kim Genetic Investigation of Bisphosphonate-Related Osteonecrosis of Jaw (BRONJ) via Whole Exome
Sequencing and Bioinformatics
13 Zhang Yufeng The Protection and Evaluation in Epilepsy Patients after a Fixed Partial Denture
14 JunjieWang Effect of Cleaning Methods on Mechanical Properties of Prostheses Silicone Rubbers
15 LI Chen The Reaserch about The Relationship between Three Brand of Zironic Ceramic Trancemittance and Color
16 Li Jichen Correlation Between Autophagy and Apoptosis in Oral Carcinoma IL-24 Gene Therapy
2014 Xi’an Conference
26
17 Li Xiaona Effect of Different Surface Treatments on Bonding of Silicone Elastomer to Acrylic Resin
18 Liang Jie Preliminary Clinical Study on Application of Computer-Assisted Surgery Technique in Maxillary Defect
Reconstruction
19 Liu Bing High Expression of NBR1 Proteins May Be Associated with Epithelial-mesenchymal Transition (EMT) in
Keratocystic odontogenic tumours
20 Lv Linhu A Survey of Motivation and Psychology of Implant Treatment of 60 or Older Habitant in Panzhihua
21 Ma Yuanyuan The Expression of Neuropeptide Y Was Regulated by Coticosterone and Acetylcholine Via Respective
Receptors in The Osteocytic MLO-Y4 Cells
22 Shigehiro Fujiwara The Approach of Tongue Pressure Measurement for Making Palatal Augmentation Prosthesis
23 Zou Shiquan Impression Technique for A Maxillofacial Pass-through Defect with Limitation of Mouth Opening:A Case
Report
24 Shogo Ozawa Contributing Factors for Abutment Teeth Survival on Obturator Prostheses
25 Wu Shuyi EPCs Transplantation for Microvascular Repair in Irradiated Tissue
26 Yan Tinglin Molecular Mechanism and Potential Roles of TNF-α-enhanced Fusion between Oral Squamous Cell
Carcinoma Cells and Endothelial Cells
27 Tong Ling Application of the Prosthesis with Titanium Framework and Functional Impressiontechnique in The
Reconstruction of The Unilateral Maxillary Defect
28 Wang Lufei The Role of Sclerostin in Mediating Alveolar Bone Remodeling in Response to Tooth Loss
29 Wang Shaohai Measurement and Analysis of The Distribution Range of Chroma Values of Healthy Anterior Gingival in Han
Population
30 Mo Wenjuan Effects of A Hindered Amine Light Stabilizer on The Color Stability and Mechnical Properties of Maxillofacial
Silicone Elastomer
31 Wu HanJiang Intraoral Approach for Mandibular Benign Tumor Resection and Mandible Reconstruction with Non-
2014 Xi’an Conference
27
vascularized Iliac Graft
32 Wu Junhua The Role of MiR-136 in Osteocyte Autophagy Activated by Estrogen Deficiency in Ovariectomized Mice
33 Zhang Xueling Increasing the Success Rate of Impression for Rehabilitation of Maxillofacial Defects with Prostheses through
Nursing Care
34 Yamamoto Masaaki Reconstruction of Hard and Soft Palate Defect with Dysarthria Dyspagia : A Case Report
35 Yang Dezhao The Activity of Hybrid Vector-mediated Interleukin-24 for Oral Carcinoma Drug Resistant Cells
36 Chao Yi Evaluation of Using Casting Maxillary Prosthesis to Repair for 9 Patients of The Part of Maxilla Were Excised
37 Han Ying Measured The Adhesive Properties of ZY-1 and ZY-2 Silicone Rubbers Curing by Steps
38 Zhang Ling The Most Suitable Aperture Size and Porosity for Porous Titanium Used for Oral Implant: a Meta-Analysis of
Clinical Trials
39 Zhang Liuchao Research Progress on Prenatal Ultrasound in The Diagnosis of Cleft lip and Palate
40 Zhang Xueming Anatomic Study of The Blood Supply of Oral Mucoperiosteum in Minipig
41 Feng Zhihong Intrinsic Gene Expression During Regeneration in Maxilla of Salamander
42 Lu Lei Effect of Nursing Cooperation on Restoration of Maxillary Defect with Hollow Obturator
43 Shen Zhiyuan Comparative Studies on Tongue Reconstruction after Hemiglossectomy with Forearm Flap Versus Anterolateral
Thigh Flap
44 Wang Lei Nerve Growth Factor-modified Mesenchymal Stem Cells Enhance Recovery of Inferior Alveolar Nerve in
Rabbit Mandibular Distraction Osteogenesis
45 Wang Yan The Experimental Study of Stem Cells on Prevention of Irradiation Injury of Salivary Gland in Mice
46 Cheng Xiaobing Reconstruction Defects of Maxilla and Palate with Temporalis Muscle Flap after Maxilla Tumor Resection
47 Jia Sen, BDNF Mediated TrkB Activation Contributes to The EMT Progression in Human Salivary Adenoid Cystic
Carcinoma
2014 Xi’an Conference
28
48 Guo Ling Application of PFM Crowning Techniques To Restore Multiple Adult Stuck Teeth with Large Scattered
Clearance
49 Yan Zhiwei Comparative Studies on Sensory Recovery in The Radial Forearm Flap Versus Anterolateral Thigh Flap Used
for Tongue Reconstruction
50 Yang Tao Experimental Study on Autologous of Rabbit Adipose-derived Stem Cells Transplantation
51 Wang Weiqi A Comparison of Health Related Quality of Life between Radial Forearm Free Flap and Pectoralis Major
Myocutaneous Flap for Reconstruction in Oral Cancer Patients
52 Xia Zhuo The Clinical Application of Temperature Molding Wax in The Protheses of Soft Palate Defect
53 Zhang Xiangyu Factors Influencing The Survival of Nonvascularized Bone Grafts Mandibular Reconstruction
54 Li Chunjie Large Full-thickness Labial Defects Repaired by Free Flaps: A Case-series
55 Li Tang Optimal Reconstructive Strategy for Large Facial Defects: A Report of 12 Cases
56 Kunal Parekh A Case Report: Two Stage Denture Issuance Technique for Fabricating Definitive Prosthesis for Hemi-
Maxillectomy Patient.
57 Zhong Laiping GDF15 Is A Potential Predictive Biomarker for TPF Induction Chemotherapy and Promotes Tumorigenesis and
Progression in Oral Squamous Cell Carcinoma
58 Hu Jingzhou Modified Bilateral Karapandzic Flap for Reconstruction of Large Lip Defect
59 Huang Jian The Basis of Applicating High-frequency Color Ultrasound in Preoperative Identification and Selection
Perforator of Anterolateral Thign Flap
60 JiTong Functional Evaluation after Mandibular Reconstruction for Oral Cancer Patients
61 Li Jun Double Barrel Vascularized Fibula Graft in Mandibular Reconstruction: A 10-year Experience with An Algorithm
62 Lv Mingming Ablative Surgery of Giant Ossifying Fibroma in The Jaws Followed by Immediate Reconstruction: A 10-year
Single Institution Experience
2014 Xi’an Conference
29
63 Mubarak Mashrah Oral Cavity Reconstruction Using A pedicled Submandibular Gland Flap: A Preliminary Report
64 Qu Xingzhou State of Art of Post-operative Hemimaxillectomy Rehabilitation: Clinical Evaluation on Prosthesis Supported
by Zygoma Implant and Remaining Natural Teeth
65 Shen Shukun Clinical Data Analysis of 200 Cases of Parotid Gland Tumor
66 Shen Yi Special Considerations in Virtual Surgical Planning for Secondary Accurate Maxillary Reconstruvtion with
Vascularized Fibula Osteomyocutaneous Flap
67 Sun Wenling Surface Modification of Silicone Rubber by Layer by Layer Assembly Method
68 Ong Huishan Tendon Sheath Giant Cell Tumor (TSGCT) with Intradural Extension: Utilizing Temporal Bone for Skull Base
Reconstruction in Preventing Brain Hernia
69 Wang Liang Application of Submental Island Flaps for Reconstruction of Oral Maxllofacial Soft Tissue Defects
70 Wang Yan an Surgical Management of Arteriovenous Malformation in Head and Neck
71 Wang Yang Illiac Crest Flap Used for Mandibular Reconstruction of Familial Gigantiformcementoma
72 Xu Liqun Orientation Techniques in Mandibular Reconstruction
73 Yang Wenjun Versatility of The Composite Lateral Arm-PCNA/PCNF Free Flap in Head and Neck Reconstruction
74 Yang Xi Clinical Present of Vascular Crisis Salvaged Operations of Free Flap Reconstruction of Head Neck Region in
56 Cases
75 Ye Weimin Tongue Reconstruction with Tongue Base Island Advancement Flap
76 Manju V Comparison of Functional Outcomes in Surgically and Prosthetically Rehabilitated Maxillectomy Patients
77 Ma Xiao Clinical Evaluation of The Effects of Different Retention Systems in Patients with Half-maxillary Defects
78 Li Qiang Analysis of Cortical Bone on The Mandibular Body in Psychological Stressed Rats by Micro-CT
79 Wang Shuming Prosthesis-guided Implant Restoration of Auricular Defect Using Computerized Tomography and 3-
Dimensional Photographic Imaging Technologies: A Clinical Report
2014 Xi’an Conference
30
80 Zhang Dapeng Obturator Restoration of An Extensive Palatal Defect with The Assistance of Intermaxillary Traction: A
Clinical Report
81 Han Ying Mechanical Properties and Color Stability of Nano-oxides Pigmented Maxillofacial Elastomer
82 Na Sijia Effects of Speech after Partial Glossectomy with Reconstruction Using Radial Forearm Free Flap
2014 Xi’an Conference
31
Session V – Chemo-radiation – Morbidities and strategies to minimize them
1 Yen Chiangting The effect of X- rays on infraorbital nerve of rabbits
2 Lin Chongxiang Reconstruction of the cranio-maxiilofacial soft tissue defection with vascularized free rectus abdominis
musculocutaneous flap and scalp expansion: a case report
3 Elisabetta Bellia Evaluation of oral health before and after radiotherapy in patients undergoing a protocol of dental hygiene.
4 Paramjot Kaur Ghotra Assessment of Shoulder and Neck dysfunction and Functional status Post radiotherapy/chemotherapy in Head
and Neck Cancer patients: A Pilot Study
5 Li Xiao PH-Responsive Micelles Constructed by PCL-PEG-PCL Triblock Polymer via Oxime Linkage for Anticancer
Drug Delivery
6 Liu Bing Sequential Release Chemotherapeutic Drug with Polymeric Delivery System for Oral Squamous Cell
Carcinoma Therapy
7 Zhu Yun A study of postoperative radiotherapy effects on vascularized nerve graft for facial nerve repair in a rabbit
model
8 Parisa Shahi Implants in irradiated tissues
9 Wei Zening Clinical Analysis of two removable prosthetic material to repair the unilateral maxillary defect.
10 YL Seetoh Dosimetric distribution to tooth-bearing regions and osteoradionecrosis following intensity-modulated radiation
therapy for oropharyngeal cancer
11 Tian Min Dental implant survival in irradiated maxilla: a systematic review of the literature
2014 Xi’an Conference
32
WORKSHOP
The following workshop will be held at Education Center,
School of Stomatology, the Fourth Military Medical University
Workshop time: 2:00pm-5:30pm
Workshop is an elective and requires a fee
Workshop Title:
Use of Advanced Digital Technologies in restoration of facial defects
Members limited to 20.
Special requiements for the above workshop: None.
Description of workshop: a.Design of nasal and auricular prosthesis in specific
software.b.Design of eyelid, wrinkle and skin texture of prosthesis with Freeform
Modeling System.c.Surgicial simulation of tumorectomy and reconstruction of jaw
with Synthes ProPlan CMF.
2014 Xi’an Conference
33
INVITED SPEAKER
Yimin Zhao, D.D.S, Ph.D
Honorary President of ISMR
President of CSOMR
President, the Fourth Military Medical
University
Professor, School of Stomatology,
Fourth Military Medical University,
Xi’an, China
Prof. Yimin Zhao is President of the Fourth Military
Medical University. He is professor of prosthodontics and is a visiting professor of
School of Dentistry, University of California, USA. Prof. Yimin Zhao is the founder
of Chinese Society of Oral Maxillofacial Rehabilitation (SCOMR). Due to his great
contribution Prof. Yimin Zhao is elected to be the honorary president of International
Society for Maxillofacial Rehebilitation (ISMR) and president of the 2014 ISMR
Xi’an Conference. He also serves as vice president of Chinese Stomatological
Association, chairman of Stomatological Society of Chinese People’s Liberation
Army and president of Shaanxi Stomatological Association and vice chairman of
Chinese Prosthodontic Society. His research interests include the digital restoration
for maxillofacial defects, material of prosthetic silicone and tissue engineering of
facial organs. Prof. Yimin Zhao wrote the first Chinese textbook for maxillofacial
prosthetics and is the most famous leader of this field in China.
2014 Xi’an Conference
34
Harry Reintsema, D.D.S, Ph.D
Maxillofacial ProsthodontistHead of Center for
Special Dental Care and Maxillofacial
Prosthetics Dept for Oral and Maxillofacial
Surgery University Medical Centre Groningen ;
University of Groningen
Groningen, Netherlands
Dr. Harry Reintsema graduated from Dental School in
Groningen, The Netherlands in 1982 and defended his
PhD-thesis in 1988. He is working as a dentist / maxillofacial prosthodontist since
1984, and is head of the UMCG Center for Special Dental Care and Maxillofacial
Prosthetics since 2003. His fields of interest concern e.g. the dental / prosthetic
treatment of Head-and-Neck Oncology patients and patients with congenital or
acquired orofacial defects, and dental (implant-) treatment in general. He is (co-
)author of several articles and books on implant dentistry and maxillofacial prosthetics,
and has participated in the organization of several conferences and workshops on
maxillofacial rehabilitation subjects.He has served on the board of the Dutch Society
for Gnathology and Prosthetic Dentistry (NVGPT) from 1992- 2002 and is member of
the International Society for Maxillofacial Rehabilitation (ISMR) executive council
since 2007 (vice president since 2010, president since 2013).
2014 Xi’an Conference
35
Sudarat Kiat-amnuay, D.D.S, MS,
Fellow of ACP
Fellow of AAMP
University of Texas School of Dentistry at
Houston,USA
Dr. Sudarat Kiat-amnuay holds academic appointments as
a tenured Professor and Director of Advanced Education
in General Dentistry Residency Program, University of
Texas School of Dentistry at Houston, USA. She is a
Diplomate of the American Board of Prosthodontics and the American Board of
Clinical Anaplastology. She graduated DDS with Honors from KhonKaen University,
Thailand. She completed anAdvanced Education in Prosthodontic ResidencyProgram
and earned a Master’s Degree in Oral biology from the University of Louisville,
Kentucky. She also completed a fellowship program in Maxillofacial Prosthetics and
Dental Oncology from the University of Texas M. D. Anderson Cancer Center in
Houston. She is currently a fellow of the American Academy of Maxillofacial Prosthetics,
American College of Prosthodontists, International Congress of Oral Implantologist,
and International Academy of Oral Oncology. She has received over 40 teaching and
research awards and published over 60 abstracts, 31 peer-reviewed journal articles,
and contributed to 2 book chapters. She is a principal and co-principal investigator of
27 grants including two 5-year-funded from the National Institute of Health and
HSRA, USA. Her research focuses in the maxillofacial prosthetic field are on color
stability and mechanical properties and randomized controlled clinical trialof
maxillofacial prosthetic elastomers.
2014 Xi’an Conference
36
Balasubramanian Srinivasan, D.D.S
Enhance Head Neck Rehabilitation,
Pune, India
Dr B.Srinivasan is a Maxillofacial Prosthodontist at the
Ruby Hall Cancer Centre.An alumnus of Govt. Dental
College & Hospital, Mumbai, he began his career in
Maxillofacial Prosthodontics at the Tata Memorial
Hospital, Mumbai. He was a recipient of the F.D.Mirza
award for paper presentation at successive national
conferences of the Indian Prosthodontic Society in 2001 and 2002 respectively.
He is a recipient of International Fellowships from the UICC to pursue advanced
training in Maxillofacial Prosthodontics in The Netherlands (2006) and Sweden(2008)
and Implants in the Netherlands (2013). He was showcased as “Member of the
Month” by the Swiss based International Union against Control of Cancer in May
2008.
He has to his credit, presentations at both the national and international fora and also
harbours research interests.He is one of the initiators of the “Poona Head and Neck
Group” in 2009,a multidisciplinary study group, to propagate the philosophy of Team
Work in Patient Care.He is a member of the Executive Committee of the Indian
Prosthodontic Society,Section Editor of the Journal of Indian Prosthodontic Society
and a committee member in the International Society for Maxillofacial
Rehabilitation.He is the Chief Executive of Enhance Head Neck Rehabilitation
LLP,an organisation founded by him to make maxillofacial prosthetics and
rehabilitation affordable and accessible.
Recently,his case report on customised ocular prosthesis has been published and
acknowledged in the book Maxillofacial Rehabilitation: Surgical and Prosthodontic
Management of Cancer-Related Acquired, and Congenital Defects of the Head and
Neck by Dr John Beumer III, Mark T. Marunick , Salvatore J. Esposito
2014 Xi’an Conference
37
Ruiying Ding, Ph.D
Elmhurst College,USA
Dr. Ruiying Ding received her bachelor, mastor and Ph.D.
degrees from Northwestern University. She has been an
associate professor in Department of Communication
Sciences and Disorders at Elmhurst College since Sep
2012. Prior to Elmhurst College, she worked as an
associate professor at University of Wisconsin-
Whitewater and as a speech-language pathologist in
hospital, rehabilitation center, outpatient clinic and long term care facilities.
Dr. Ding has published research articles in nationally and internationally renowned
journals, including: Journal of Speech Language Hearing Research, Dysphagia, Head
& Neck, Journal of Folia Phoniatrica et Logopaedica, Chinese Journal of
Rehabilitation Theory and Practiceand Chinese Journal of Stroke. She also published
several book chapters in dysphagia evaluation and treatment in three medical speech
and language therapy textbooks.
She has presented extensively in state, national and international conferences,
including annual convention of ASHA, Wisconsin Speech-Language-Hearing
Association, First and Second China International conference as well as Symposium
of Clinical Education in Speech Pathology in several hospital settings.
Dr. Ding served as Journal reviewer for Dysphagia and Head and Neck Medicine. She
also served as grant reviewer for ASHA’s SPARC award (Students Preparing for
Academic & Research Careers). She is the editor for The Communication Connection
Journal, the official journal of the Wisconsin Speech-Language-Hearing Association.
In 2008 she was elected the Vice President of Communication in the Wisconsin
Speech-Language-Hearing Association. She is also an adjunct professor in East
China Normal University and Shanghai University of Traditional Chinese Medicine,
two renowned universities in Shanghai, China.
2014 Xi’an Conference
38
Gerald T. Grant, DMD, MS
Naval Postgraduate Dental School, USA
Captain Gerald Grant received his D.M.D. degree from
the University of Louisville, School of Dentistry in 1985,
a certificate in Prosthodontics from the Naval
Postgraduate Dental School, Bethesda, MD and a Masters
from George Washington University in 1995, and a
certificate in Maxillofacial Prosthetics from the Naval
Postgraduate Dental School in 1999. He is a Diplomat of
the American Board of Prosthodontics. Captain Grant served as Chairman and
Program Director for the Maxillofacial Prosthodontics Fellowship Officer program,
Naval Postgraduate Dental School and Specialty Leader to the Surgeon General for
Maxillofacial Prosthetics and Implant Dentistry from 2004 to 2009. Heholds
academic positions as an associate professor at the Uniform Services Health Science
University,adjunct associate professor at Johns Hopkins University School of
Medicine department of Plastic Surgery, the Director of Craniofacial Imaging research
atthe Naval Postgraduate Dental School (NPDS) and the Service Chief of the 3D
Medical Applications Center, Department of Radiology, Walter Reed National
Military Medical Center.
Captain Grant was awarded the John J. Sherry Award for Dental Research from the
American college of Prosthodontics and the International Association of Dental
Research’s Fuchette International Research Award for his research and the Major
General Bill B. Lefler Federal Services Award from the American College of
Prosthodontics for his contributions to military medicine for his efforts with virtual
surgical craniofacial reconstructions, digital imaging and additive manufacturing
techniques for surgical guides and custom implants.
Captain Grant’s research area is in Craniofacial Capture of hard and soft tissue for use
in virtual treatment planning, surgical guide techniques, and fabrication of custom
implants using additive manufacturing, and CAD/CAM mold design for silicone
facial prostheses. His present endeavors are in the area of computer generated
forensic reconstruction, facial reconstruction, design of custom Ti implants, and
biomaterials for additive manufacturing. His team is a part of the Armed Forces
Institute of Regenerative medicine, and has research studies with the FBI,
Smithsonian, and several universities in and out of the United States.
2014 Xi’an Conference
39
Captain Robert M. Taft
Naval Postgraduate Dental School, USA
Captain Taft was born and grew up in Littleneck Long
Island, New York. He received his D.D.S. degree from
Emory University School of Dentistry in 1983. He
entered the Navy in 1983 following graduation and was
commissioned a Lieutenant in the U. S. Navy Dental
Corps.
Following graduation, Captain Taft’s first duty station
was a one-year general practice residency at PortsmouthNavalHospital,
PortsmouthVa.In July of 1984 he reported to Naval Station San Miguel in the
Philippines as Department Head for Dental Services. His next duty station was at
Naval Air Station Brunswick, Maine, where he served as the Prosthodontic and
Division Officer.In 1988, Captain Taft entered the Prosthodontic residency program at
the Naval Postgraduate School in Bethesda, MD and two years later received a
certificate. He stayed on staff in the Prosthodontic Department as the Laboratory
Officer and Head of Fixed Prosthdontics. Captain Taft then continued in a fellowship
in Maxillofacial Prosthetics at Wilford Hall USAF Medical Center, San Antonio, TX
receiving a certificate in 1992. Following his specialty training, Captain Taft served
in various positions at Naval Medical Center San Diego, CA. Captain Taft next served
as Chairman and Program Director for the Maxillofacial Fellowship Officer program,
Naval Postgraduate Dental School from 1997 – 2001 and later as professor in the
Naval Postgraduate Prosthodontics Residency Program, 2002. He then took
assignment at the Navy Medicine Education and Training Command, Bethesda, MD,
as Director, Graduate programs and was the Medical Joint-Service Education Director,
for the 2005 BRAC process. Captain Taft served as Dean of the Naval Postgraduate
Dental School and Specialty Leader to the Surgeon General for Postgraduate Dental
Education from June 2006 to June 2011, Deputy Chief, United States Navy Dental
Corps from June 2011 to June 2013 and is currently Department Chair, Prosthodontics,
Naval Postgraduate Dental School. Captain Taft is a Diplomate, Board Examiner and
Secretary/Treasurer of the American Board of Prosthodontics, Fellow/BOD member
of the American College of Prothodontists, Associate Fellow, Academy of
Prosthodontics, Immediate past President of the American Academy of Maxillofacial
Prostheticsand past Specialty Leader to the Surgeon General for Maxillofacial
Prosthetics and Implant Dentistry. His personal awards include twoLegions of Merit,
three Meritorious Service medals, two Navy Commendation medals and two Navy
and Marine Corps Achievement medals.
2014 Xi’an Conference
40
YoungBum Park, DDS, PhD
Department of Prosthodontics, Yonsei
University College of Dentistry
Seoul, Republic of Korea
2013. 03- Current: Associate Professor, Yonsei
University College of Dentistry
2011.03-2013. 02: Clinical Associate Professor, Yonsei
University College of Dentistry
2009. 03-2011. 02: Clinical Assistant Professor, Yonsei
University College of Dentistry
2007-2009: Visiting Instructor in Oral Biology, State University of New York at
Buffalo, NY, USA
2007-2008: Clinical Assistant Professor in Periodontics and Endodontics, State
University of New York at Buffalo, NY, USA
2003-2006: Visiting Instructor and Resident in Periodontics and Endodontics, State
University of New York at Buffalo, NY, USA
1999-2002: Prosthodontist, Yeoju Public Health Center (for Military Service),
KOREA
1996-1999: Resident in Prosthodontics, Yonsei University College of Dentistry
PhD: 2009.06, State University of New York at Buffalo, NY, USA/Oral Biology
Master: 2006.02, State University of New York at Buffalo, NY, USA/Oral Science
DDS: 1995.02, Yonsei University College of Dentistry, Seoul, S. Korea/Dentistry
2014 Xi’an Conference
41
Professor Zhang Chenping, MD, DDS, FRCS
The Ninth Affiliated Hospital, Shanghai Jiao
Tong University, China
He is specialized in diagnosis and treatment of oral &
maxillofacial and head & neck neoplasm, especially in for
functional mandible reconstruction. He was appointed as
Council of International Academician of Oral Cancer,
Director of IAOMS Oral and Maxillofacial Oncology and
Reconstructive Surgery Training Fellowship Program,
Academician of Royal College of Surgeons of Edinburgh, UK.As the first
accomplisher, he has been awarded First Award for Science and Technology
Advancement from Shanghai Municipality in 2010, Chinese Medical Science Prize
and other 9 important awards. He has published 12 monographs as editor including
two as Editor-in-Chief. He has acquired 15 research grants including Major Program
of Shanghai Municipal Science and Technology Commission, Project Supported by
National Natural Science Foundation of China. He has published 226 scientific papers,
30 of them are cited by the Scientific Citation Index as first or corresponding author.
He was awarded Shanghai Leading Talents and excellent academic leaders of
Shanghai Municipal Science and Technology.
2014 Xi’an Conference
42
Joji George Sekine, DDS, Ph.D
Department of Oral and Maxillofacial Surgery,
Shimane University Faculty of Medicine,
Japan
Prof. Sekine graduated from Fukuoka Dental College in
1989, and defended his Ph.D. thesis in 1996 (Nagasaki
University). He has been working as as resident, assistant
professor and lecturer, Department of Oral and
Maxillofacial Surgery, Nagasaki University Hospital from
1989 to 2006. He has been invited to Umeå University, Sweden as a visiting professor
for 1 year, and then got a title of professor and chairman of Shimane University in
2007. His speciality is oral cancer and reconstructive surgery including functional oral
rehabilitation using dental implant. He is a senior consultant as well as an accredited
maxillofacial surgeon, Japanese Society of Oral and Maxillofacial Surgeons, a senior
consultant, Japanese Academy of Maxillofacial Implants, a certified cytopathologist,
Japanese Society of Clinical Cytology, and a clinical oncologist, Certified by Japanese
Board of Cancer Therapy. He was given Research Scholarship Grant and Young
Investigator’s Award of International College of Surgeons in 2006. His hobby is
yachting, photography and business administration.
2014 Xi’an Conference
43
Sun Jian, MD
The Ninth Affiliated Hospital, Shanghai Jiao
Tong University
Shanghai, China,
Professor Sun Jian, MD, graduated from the
Stomatological College of Shanghai Second Medical
University. He went to France for further study on Head
and Neck Tumor and Reconstructive Surgery under the
supervision of Professor Jean Louis Blanc and Bernard
Devauchelle (1997-1998). Now he serves as the vice director of oral and
maxillofacial-head and neck oncology dept. Ninth People’s Hospital, Shanghai Jiao
Tong University School of Medicine. He is now Director of Cooperative Group of
Plastic Reconstructive Surgery, Chinese Society of OMFS, CSA, Vice Director of
Division of Tumor Plastic Surgery, Chinese Society of Plastic Surgeons, CSA, and
Vice director Division of head and neck cancer, Shanghai Anticancer Association. He
is specialized in diagnosis and treatment of oral & maxillofacial and head & neck
tumor, in particular for the functional reconstruction and microsurgery, computer
aided surgery. He has published more than 100 scientific papers, over 40 being
collected in SCI among them. He has published 3 monographs as Editor-in-Chief, 10
books as Vice Editor-in-Chief or Writer. His research on functional maxillary
reconstruction of large defect with vascularized fibula flap and titanium mesh won
First prize of Science and Technology Progress from Ministry of Education.
2014 Xi’an Conference
44
Arun B. Sharma, BDS, MSc.
Division of Prosthodontics at the University
of California, San Francisco School of
Dentistry
SF, USA
Dr. Sharma is a Clinical Professor in the Division of
Prosthodontics at the University of California, San
Francisco School of Dentistry. Dr. Sharma is a
Diplomate of the American Board of Prosthodontics. He
maintains a private practice, and is the Assistant Director of the graduate program in
prosthodontics at UCSF. Dr. Sharma received his dental degree from the University
of Bombay in 1983 and a Masters in Prosthetic Dentistry from the University of
London. He then completed a prosthodontic residency from UCSF and a
maxillofacial prosthetic residency from UCLA. Dr. Sharma has contributed to three
textbooks and authored many articles. He has served as the Assistant Editor of the
Journal of Prosthetic Dentistry and is currently the Vice Chair of the Editorial Council
of the JPD. He is currently Vice President Elect for the American Prosthodontic
Society and a Past President of the Pacific Coast Society for Prosthodontics.
2014 Xi’an Conference
45
Ben Wu, PhD
School of Dentistry
University of California, Los Angeles
LA, USA
Prof. Ben Wu obtained his residency training in Advanced
Prosthodontics at Harvard, and his Ph.D. in Materials
Engineering at the Massachusetts Institute of Technology.
At MIT, he developed the powder-binder interaction
physics for 3D printing of biomedical relevant materials,
and published the first papers on 3D Printed drug delivery devices and tissue
engineering scaffolds. Prof Wu is currently Professor and Chairman of Division of
Advanced Prosthodontics in the UCLA School of Dentistry, and Chairman of the
Department of Bioengineering in the UCLA School of Engineering. He is Director of
the Weintraub Center for Reconstructive Biotechnology, and holds joint faculty
appointment in the Departments of Materials Science and Engineering, and the
Department of Orthopedic Surgery. He has published over 140 papers and delivered
over 100 lectures in the development of material-based solutions to promote tissue
regeneration and wound healing. Dr. Wu provides clinical patient care in the UCLA
Faculty Dental Group Practice, and serves on numerous advisory committees in
academia and industry.
2014 Xi’an Conference
46
Takahiro Ono, PhD
Department of Prosthodontics, Gerodontology
and Oral Rehabilitation (Graduate School of
Dentistry) and the Center for Advanced
Medical Engineering and Informatics, Osaka
University
Osake, Japan
Dr. Takahiro Ono is an associate professor in the
Department of Prosthodontics, Gerodontology and Oral
Rehabilitation (Graduate School of Dentistry) and the Center for Advanced Medical
Engineering and Informatics, Osaka University. He will be the chief professor in the
Division of Comprehensive Prosthodontics, Graduate School of Medical and Dental
Sciences, Niigata University from October 2014. He graduated from the Faculty of
Dentistry in Hiroshima University and completed Ph.D course of Osaka University
Graduate School of Dentistry. He is specialized clinically in a prosthodontic
rehabilitation for dysphagic patients including oral cancer patients and neurologic
patients, and has done a lot of clinical research works in the field of mastication and
swallowing physiology. Currently, he serves as a director of Japanese Academy of
Maxillofacial Prosthetics, Japanese Society for Mastication Science and Health
Promotion, Japanese Society of Stomatognathic Function, and as a councilor of
Japanese Society of Geriatric Dentistry, Japanese Society of Prosthetic Dentistry, and
Japanese Society of Dysphagia Rehabilitation. Also, he is a member of European
College of Gerodontology and the Society of Oral Physiology. He is the chief
investigator of 10 national research grants and section-chief investigator of 2 big five-
year national grants. He has published 150 academic papers, contributed to 50 book
chapters, and received 10 prizes for distinguished academic paper or activities.
Additionlly, he is an editorial board member of Journal of Dental Research,
Gerodontology and Oral Oncology.
2014 Xi’an Conference
47
Karl Lyons, BDS
Faculty of Dentistry at the University of Otago
Otage, New Zealand
Karl is a Professor and Prosthodontist in the Faculty of
Dentistry at the University of Otago, in New Zealand
where he is currently the Chair in Restorative Dentistry
and Head of the Department of Oral Rehabilitation. He
completed a BDS, a postgraduate prosthodontics
programme and a PhD at the University of Otago and a
residency in maxillofacial prosthetics at the University of California, Los Angeles.
Karl is involved in undergraduate and postgraduate teaching, has lectured nationally
and internationally in various areas of prosthodontics, and is actively involved in
prosthodontic research. Karl is a past president of The Australian and New Zealand
Academy of Prosthodontists and the New Zealand Association of Prosthodontists and
Restorative Dentists and is a past Executive Board Member of the International
Society for Maxillofacial Rehabilitation.
2014 Xi’an Conference
48
Eric C. Sung, DDS
School of Dentistry
University of California, Los Angeles
LA, USA
Dr. Sung received his dental degree at UCLA School of
Dentistry. He also completed General Practice Residency
at UCLA. Since that time, he has been on staff at Childrens
Hospital in Los Angeles, City of Hope National Medical
Center, VA Greater Los Angeles Health Care System,
Kaiser Permanente, and at UCLA. Currently, Dr. Sung is the program director and
chair of UCLA’s hospital dentistry program. He is also the vice chair of advanced
prosthodontics at UCLA School of Dentistry.
Dr. Sung has lectured nationally and internationally and has multiple publications in
peer reviewed.
2014 Xi’an Conference
49
LECTURE PRESENTATIONS
1
Digital Time in the Maxillofacial Rehabilitation
Zhao Yimin
School of Stomatology, Fourth Military Medical University
Purpose: Maxillofacial defects can not only damage physiological functions of oral cavity, but also
result in shattered appearance which often causes severe psychological problems. Therefore, the
treatment of maxillofacial defects and deformities needs functional reconstruction of jaw bones and
realistic repair of facial defects, by using either surgical approaches or prostheses for which surgeries
are not feasible.
Methods: We have been focusing on computer-assisted techniques for the reconstruction and repair of
maxillofacial defects and deformities in a series of laboratory research and clinical practice in School
of Stomatology at the Fourth Military Medical University. For computer-assisted design and
manufacture of realistic facial prostheses, three-dimensional models are manufactured according to the
data set of facial surface obtained using the sensing system, followed by designs of prostheses using
specific software either by creating a mirror image or selecting matched data in a database of normal
nose and ear established by our team. We have developed a novel method to ensure precise designs of
facial prostheses with totally free control of margin positions, shape and thickness, etc. We have also
established a systemic negative-type design protocol to completely avoid the usage of wax and
therefore largely simplify the process of prosthesis manufacture, as well as specific software for the
design of facial prostheses for much easier learning.
Results: Using these novel technologies, we have successfully treated more than 100 cases of
maxillofacial defects and deformities due to trauma, tumor resection or developmental diseases, with
satisfactory results.
Conclusion: Through our dedicated efforts, this method is being improved and used more and more. It
is now become one of the routine therapy techniques in our hospital.
2
Overdentures on Primary Mandibular Implants in Patients with Oral Cancer: a Follow-up Study Over 14 Years
Harry Reintsema
UMC Groningen, The Netherlands
Purpose: To assess oral functioning, patients’ satisfaction, condition of peri-implant tissues and
implant survival in oral cancer patients with mandibular overdentures on primary implants up to 14
years after insertion.
Methods: In a prospective cohort of 164 oral cancer patients endosseous dental implants were inserted
in the interforaminal region of the mandible during ablative surgery of the tumour. All patients were
evaluated using questionnaires and clinical assessments during a final assessment in 2012.
Results: In 84% of the patients an implant-retained mandibular overdenture was made. Completion of
prosthetic rehabilitation and oral functioning was not associated with primary tumour location, number
or type of implants inserted, tumour stage and the type of reconstruction used during surgery. Over time,
peri-implant mucosa was in general free of inflammation. More implants were lost in irradiated patients
(8.5%) than in non-irradiated patients (0.5%). Irradiated patients reported more problems in oral
functioning and reported lower satisfaction than non-irradiated patients. Patients with an implant-
2014 Xi’an Conference
50
retained mandibular overdenture reported fewer problems in oral functioning than patients without an
overdenture.
Conclusion: Primary implant insertion in oral cancer patients should be routinely incorporated in the
surgical planning as oral functioning in patients wearing mandibular overdentures improves distinctly
and peri-implant health is at least reasonable.
Key words: Head and neck cancer; Edentulous; Dental implants; Quality of life; Prosthodontics;
Patients’ satisfaction.
3
Color Stability of Silicone Maxillofacial Elastomers: A Summary of 15-Year Research Experience
Sudarat Kiat-amnuay
The University of Texas School of Dentistry at Houston
Purpose: To summarize the past 15 years results of color stability studies of silicone maxillofacial
elastomers, and the translation of the results to the clinical setting.
Methods: Although the silicone elastomers have been used in the maxillofacial prosthetics field for
over half a century, there are still numerous reports of dissatisfaction with color stability, esthetics, and
longevity. The result of a global satisfaction quality-of-life test instrument revealed that the restoration
of esthetics was the most relevant need of patients who wear facial prostheses and ranked as the
greatest problem among all evaluated domains. The final esthetic result and color stability are the most
important factors affecting clinical success or failure of maxillofacial prostheses. Color changes have
directed most investigations on the color stability of colorants and elastomers.
The presentation will cover a review of most common types of opacifiers, pigments, and silicone
elastomers used for fabricate maxillofacial prostheses according to the 2010 survey of currently used
materials for fabrication of extraoral maxillofacial prostheses in North America, Europe, Asia and
Australia, and a review of their color stability research in related studies. This presentation will also
cover the color difference thresholds of maxillofacial skin replications.
Results: Based on the 15-year results of the presenter and her collaborator’s laboratory studies,
recommendations will be made to help clinicians decide which types of opacifier, pigment, and silicone
elastomer combinations create the most color stable prostheses.
Conclusion: The subsequent review will help clinicians fabricate better and more predictable color-
stable prostheses, enhancing the quality of life for maxillofacial prosthetic patients.
Key words: Color stability; Maxillofacial prosthetic elastomers; Facial prostheses; Review.
4
Maxillofacial Rehab Marching Ahead in India: 2006-2014 Experience
Balasubramanian Srinivasan
Enhance Head Neck Rehabilitation
Purpose: Advancement of a new speciality calls for not just upgradation of technical knowledge but
also overcoming logistical hurdles in order to be able to put the new found technical knowledge to
effective use. As a professional technical challenge are far easier to overcome than logistical ones.
Effecting a paradigm shift in the minds of people can be a daunting task posing immense challenges.
For someone who proposes to initiate a maxillofacial practice, especially in an environment where it
has been virtually unheard of, subject knowledge needs to be augmented with a simultaneous plan of
action to create an environment to be able to execute it as well.
2014 Xi’an Conference
51
This presentation is a follow up on the author’s earlier presentation at the ISMR Conference at
Bangkok in 2008, outlining the strides made in maxillofacial rehabilitation in India over the past 8
years.
Key words: Intrinsic motivation to develop the speciality timely guidance from senior colleagues,
sustained efforts and support from a global society as the ISMR can ensure advancement of
maxillofacial rehabilitation across the globe.
5
The Diagnosis and Treatment of Dysphagia
Ding Ruiying
Elmhurst College
Videofluoroscopy is a moving x-ray study of swallowing. With this procedure, the examiner is able to
determine the duration and completeness of bolus transit as well as the movement patterns of the
mandible, tongue, velum, larynx, and to some extent, the pharyngeal wall and upper esophageal
sphincter. Also, the symmetry of transport can be observed. Penetration of the material into the
laryngeal vestibule and aspiration of the material into the trachea can be observed in this procedure.
Patients are given small boluses of varying viscosities in accordance with their level of tolerance. Bolus
preparations range from 3 to 20 ml.
This procedure is not simply to determine if a patient is aspirating or even why the patient is aspirating;
rather, it helps the clinician determine if a patient can receive sufficient nourishment by mouth for
health and recovery, and if there are particular compensatory procedures or particular volumes or
viscosities that can help the patient return to oral intake. Based on findings from videofluoroscopy,
various swallowing disorders can be diagnosed.
The documentation should include not only the reason for the residue or aspiration, but also the timing
of each event and the patient’s reaction (or lack thereof) to residue or aspirated material. Finally, the
impact of compensatory maneuvers should be investigated and documented. The videofluoroscopic
swallowing examination is considered the “gold standard” in the clinical assessment of dysphagia.
Many options exist for behavioral interventions for dysphagia. The goal of the therapy is to reestablish
of oral feeding while constantly maintain adequate hydration and nutrition and safe swallowing. The
two types of therapy are direct therapy and indirect therapy. Direct therapy is performed when patient is
eating including changing food characteristics, patient’s positions and special manuvers during eating.
Indirect therapy is performed when patient is not yet ready to eat orally. It mostly includes various
exercises of the oral, pharyngea and laryngeal structures.
Surgical treatment of the head and neck cancer may remove structures that are important to bolus
movement. If structures have been removed, a maxillofacial prosthodontist is a valuable resource. In
combination with a speech-language pathologist, a maxillofacial prosthodontist can fabricate palatal
lifts, obturators, maxillary shaping devices, or other intraoral prostheses that can contribute to improved
swallowing function. A palatal lift helps lift the existing soft palate into a raised position, thus creating
improved velopharyngeal closure. An obturator is a device that fills a gap created by surgical resection.
If the soft palate is removed, an obturator can be used to facilitate separation of the oral and nasal
cavities. A maxillary shaping device is a prosthesis that fits over the hard palate. This device may be
thickened or shaped to facilitate maximal contact with a weakened or partially resected tongue.
Increased lingual-palatal contact facilitates improved oral bolus transport.
2014 Xi’an Conference
52
6
Digital Technologies in Maxillofacial Rehab and Reconstructive Surgery
Robert Taft , Gerald T Grant
National Naval Medical Center
The use of advanced digital technologies in maxillofacial reconstruction and rehabilitation will be
discussed to include image capture, digital design and use of digital manufacturing technologies.
Recent developments and examples used in the current practice of the presenters will be presented.
Objectives:
1. Familiarize the viewer with the conventional method of Maxillofacial Prosthetic Reconstructions
2. Demonstrate the application of advanced digital technologies in Maxillofacial Prosthetic Reconstruction.
3. Identify future reconstruction application using advance digital technologies.
7
Implant System Using Precision Surgical Guide for Maxillofacial Prosthesis
Young-Bum Park
Department of Prosthodontics, Yonsei University College of Dentistry
Purpose: The planning of implant surgery using computed tomography (CT) scans has long been used
to improve success of implant. However, this methodology may be jeopardized by unfavorable quality
or quantity of bone especially in patient who requires maxillofacial implant surgery due to trauma,
cancer and congenital abnormalities. Using short implant designed for maxillofacial application with
the aid of virtual planning software program may be considered for more precise and accurate implant
planning and for successful implant surgery.
Methods: A 60-year-old male patient with maxillofacial defect around orbit, extended to maxilla and
zygomatic bone due to tumor resection, was planned to have two implant fixtures in the supraorbital
bone for maxillofacial prosthesis. Prior to implant placement, virtual planning was performed by
transferring 3-dimensional (3D) computed tomographic scanning to OnDeman3D (Cybermed Co.,
Seoul, Korea) software program. Two short maxillofacial implants (Dentium, Seoul, Korea) was
successfully installed using pre-designed In2Guide (CyberMed Co., Seoul, Korea) mucosa-supported
surgical template.
Results: Implant installation were successfully completed without any clinical complications such as
fenestrations, nerve injury, bleeding and other unexpected events. Post-operative clinical assessment
and radiograph was taken and confirmed that implants were precisely placed as planned. Abutment
with magnet attachment was installed and final maxillofacial prosthesis was delivered to patient.
Conclusion: Implant system with maxillofacial implant based on precision implant surgical guide can
be successfully utilized for maxillofacial rehabilitation with enhanced accuracy and reliability.
Key words: Maxillofacial implant; Implant surgical guide; Maxillofacial rehabilitation.
2014 Xi’an Conference
53
8
Microsurgical Free Flap Reconstructions of Head and Neck Region: Shanghai Experience of 34 years
Zhang Chenping
The Ninth Affiliated Hospital, Shanghai Jiao Tong University
Surgery of Oral cancer was unique so as to its important anatomical structure in head and neck region.
Different sites of the oral cancer had own characteristics.
The tissue and functional defect was along with radical surgery. So soft and hard tissue reconstruction
was obligatory. Free flap reconstruction was prior in large and complex defect. From 1979 to 2013,
3598 soft free flaps included forearm flap, latissimus dorsi myocutaneous flap, pectoralis major
myocutaneous flap (PMMF), anterial lateral thigh flap and lateral arm flap, et al. And 1042 hard free
flaps consisted of fibular myocutaneous flap, iliac myocutaneous flap and scapula myocutaneous flap.
The successful rate increased from 92% in 1980's to 98.5% nowadays, 96.8% in average. The forearm
flap and fibular was the most common flap in soft and hard tissue reconstruction of the defects. Anterial
lateral thigh flap provided us much more flexible choice for reconstruction of the different defects. The
fibular flap and DCIA was effective in simultaneous dental implant of patients in mandibular
reconstruction.
For tongue defect,the volume restoration was to recover swallowing. For buccal defect, we should
pay attention to prevent restriction of mouth opening. The aim of mandibular reconstruction was not
only the restoration of mandibular continuity and contour, but also restoration of oral function through
the use of dental implants. Dental implant combined with mandibular reconstruction was a real sense of
challenge for oral and maxillofacial surgery and oral implantology. In our hospital, only nearly 30%
patients of mandible reconstruction had received dental implant and attain nearly normal masticatory
function. Dental implant distractor (DID) was used with simultaneous fibular flaps for functional
mandibular reconstruction, which has been applied in over 40 cases.
9
Dental Implant for Oral Tumor Patients
Joji George Sekine
Shimane University Faculty of Medicine
Background: Oral tumor surgery can result in a myriad of separate and distinct functional and
cosmetic problems. Because of this reconstructive surgery is recommended to improve patients’ quality
of life. The purpose of reconstruction of oral cavity defects is to facilitate healing, prevent wound
breakdown and fistula formation, cover exposed bone with full thickness tissue, and promote normal
function and facial esthetics as much as possible. To achieve these results maxillofacial surgeons have
a large number of reconstructive options available, including no reconstruction, primary repair with
local tissue and the use of local, regional or distant pedicle or free flaps. However, patients who
underwent reconstruction of mandibular continuity were left without dentition or were rehabilitated
with removable dentures. Our policy to establish treatment goal in oral tumor patients is to achieve
functional oral rehabilitation with implant-supported osseointegrated implants or extruding patients’
own impacted teeth following anatomical reconstructive surgery.
Aims: The present paper describes our surgical strategy for functional oral rehabilitation using
osseointegrated implants following many kinds of bone augmentation procedures. Treatment course of
benign odontogenic as well as malignant tumors of the mandible is summarized and discussed.
Methods: The present paper describes the functional oral rehabilitation in 26 oral tumor patients using
osseointegrated implants as well as extrusion of impacted teeth. Primary lesions were 12 benign
(ameloblastoma and ossifying fibroma, 4 men and 8 women, mean age 30.7-year-old) and 14 malignant
tumors (squamous cell carcinoma and mucoepidermoid carcinoma, 6 men and 8 women, mean age
62.2-year-old). Bone defect was reconstructed by free or vascularized bone grafting or distraction
2014 Xi’an Conference
54
osteogenesis at the same timing or following tumorectomy. Soft tissue defect was also done by
pedicled or free flap at the same timing of the primary surgery. Fixtures were placed in the grafted or
augmented bone, and abutments were connected 6 to 9 months later together with vestibuloplasty.
Mucosal grafts were used to replace the skin flap around abutments. In 2 benign cases, impacted teeth
were extruded using orthodontic technique following tumorectomy.
Results: All implants survived during 1 to 19years’ follow-up after loading. No tumor recurrence has
been seen during the follow-up term.
Conclusion: Dental implant would be feasible to improve the quality of life in patients who are
suffering form masticatory disturbance due to tumor surgery.
10
Functional Reconstruction Maxillary Defects After Ablative Surgery
Sun Jian
The Ninth Affiliated Hospital, Shanghai Jiao Tong University
Abstract: Oral and Maxillofacial tumor leads to severe facial malformation and oral dysfunction such
as impairment of mastication, articulation, and deglutition. The main purpose of functional oral and
maxillofacial surgery is to restore the facial contour and oral function as much as possible. This
presentation discusses the issues of functional reconstruction of maxillary defects after ablative surgery
in oral tumor. For maxillary reconstruction, vascularized fibula osteomyocutaneous flap is used in class
2 defect according to Brown’s classification, vascularized fibula osteomyocutaneous flap and titanium
mesh are applied in class 3 defect. Surgical plan and simulative operation of ablative surgery,
autologous bone harvest, maxillary reconstruction are all preoperatively made in the computer.
According to the result of virtual surgery, the individual replicas of the maxilla and the guide template
are made by computer aided manufacturing/computer aided design (CAD/CAM) techniques so that the
operation can be performed quickly and accurately.
Maxillary reconstruction: Vascularized fibula osteomyocutaneous flap is applied to perform
maxillary reconstruction. The fibula is osteotomied into 2~3 segments to restore the unilateral or
bilateral alveolar ridge and pterygomaxillary buttress in patients with class 2 defect. The fibular
segments are fixed to contralateral alveolar ridge and ipsilateral zygoma with titanium mini plates. The
titanium mesh is fixed to the fibula and the residual bony buttress to reconstruct the anterior wall of the
maxilla and the orbital floor in the patients with class 3 defects, besides bone reconstruction with the
fibula. The skin paddle is to restore the palate. For the patients with extensive soft tissue defects, the
free radial forearm flap is combined to restore soft tissue defects. Implant-borne prostheses or removal
partial dentures are performed immediately or delayedly. The postoperative evaluation of the function
included speech and masticatory function. Assessment of occlusal force was proceeded by T-scan Ⅱ
system (Tekscan company, USA). Speech intelligibility test and the computerized acoustic analysis of
[a],[i],[e],[u] were conducted to evaluate the postoperative articulatory function. The results of
postoperative functional evaluation were well.
Key words: Mandibular reconstruction; Maxillary reconstruction; CAD/CAM technique.
11
Implants for Pediatric Patients: Growth and Implant Placement
Arun Sharma
University of California, San Francisco, USA
Patients with ectodermal dysplasia and alveolar clefts have been a part of clinical research and patient
management at UCSF since 1992. Long term follow-up and clinical experience has allowed UCSF to
2014 Xi’an Conference
55
establish a protocol for the use of osseointegration in children. We are often asked the question, “What
is the appropriate time to use implants in children”? While there is no single appropriate answer, we
evaluate the pediatric patient and plan treatment in three separate categories: Group I: For the growing
child who is missing a single tooth with adjacent natural teeth, implants should not be placed until
dento-alveolar development is complete. Group II: For the completely edentulous growing child,
implants can be planned as early as 7 years of age. Although surgery may be necessary when growth is
complete to correct the jaw size discrepancy. The prostheses may have to be remade and Group III: For
the partially edentulous growing child the decision as to when to place implants is more complex, and
is dictated by the extent of the edentulous space and its proximity to natural permanent teeth. Our
treatment approach is to first make conventional removable prosthesis after orthodontic treatment is
complete. If this provides a satisfactory result, we will wait for growth to be completed before implant
placement. If the conventional treatment is unsatisfactory, implants can be placed, but the need for
surgery and/or remake of the prostheses must be anticipated at the end of growth.
12
Recent Advances in Craniomaxillofacial Tissue Engineering
Ben Wu
University of California, Los Angeles
Cancer, trauma, and congenital defects can produce tissue deficits in the craniomaxillofacial complex t
hat are associated with severe esthetic deformity, discomfort, and functional impairment. In particular,
tumors that require high dose chemoradiation and extensive resection often leave behind tissues that ha
ve limited vascularity, significant scarring, and poor healing capacity. While the use of vascularized fr
ee flaps can improved graft survival in these suboptimal healing environments, strategies to minimize ti
ssue damage are highly desirable to maximize the remaining quality of life. This talk will highlight rec
ent bioengineering advances that may be useful in the preservation of critical tissues surrounding unres
ectable tumors. This talk will also summarize some of the exciting innovations in reconstructive biote
chnology that may be used to promote the regeneration of functional anatomical structures in the cranio
maxillofacial complex.
13
Effect of Early Stage Dent-maxillary Prosthesis in the Rehabilitation of Maxillectomy Patients
Takahiro Ono
Osaka University Graduate School of Dentistry
Purpose: Aesthetic and functional rehabilitation for maxillectomy patients should be started as soon as
possible. In our department, Early Stage Dent-maxillary Prosthesis (ESDP) has been delivered to post-
surgical maxillectomy patients for this purpose. ESDP is fabricated on the pre-surgical working model,
so it duplicates the dentition and alveolar contour on the prosthesis. In my lecture, procedure to
fabricate ESDP and its effect in the rehabilitation will be presented. ESDP improves masticatory ability
as well as speech intelligibility at the similar level with definitive obturator. Questionnaire assessment
of quality of life (QOL) by using EORTC QLQ-H&N35 revealed that patients with ESDP showed
higher QOL in the items such as [speech],[social eating],[social contact],[problems with teeth]
than patients with delayed surgical obturator. ESDP can be recommended as an effective treatment for
maxillectomy patients.
Key words: Dent-maxillary prosthesis; Maxillectomy; Rehabilitation; Quality of life.
2014 Xi’an Conference
56
14
Microbial Adhesion to Maxillary Obturator Prostheses
Karl Lyons
University of Otago, New Zealand
Restoration of maxillary defects resulting from resection of palate and/or naso-sinus neoplasms is
commonly achieved using obturator prostheses, however obturators may be colonised by
microorganisms and function as a reservoir for infection of the oral and nasal soft tissues. Such patients
commonly also require radiotherapy that can result in changes in oral flora. These changes in
immunocompromised individuals increase the risk of prosthesis-related infections. This presentation
will present the results of a study that investigated microbial adhesion to, and colonisation of,
maxillary obturator materials. The investigation involved clinical and laboratory components.
Clinically, microbial colonisation of obturator prostheses and adjacent tissues was investigated in
patients referred for restoration of maxillary defects. This was undertaken at various stages of
prosthodontic treatment and microbial identification was carried out from samples obtained at these
appointments.
Clinically, obturator prostheses and adjacent tissues in all patients investigated were colonised by
Candida, with Candida albicans identified in more than 90% of patients, at all stages of treatment.
Microbial colonisation increased with the age of the prosthesis with the number of
microorganisms only reducing following a reline or delivery of a new prosthesis. For patients
receiving radiotherapy, a high level of C. albicans colonisation (>105colony forming units per swab) of
obturators after 1-week of oral radiotherapy was found to predict patient susceptibility to increased
complications during radiotherapy. In the laboratory, Candida, and most commonly, C. albicans was
identified from obturator swabs. Using adhesion studies, C. albicans was found to attach to nine
different materials from which obturators can be made, and attachment was greater to materials with a
greater surface roughness and surface energy. Saliva increased adhesion of C. albicans. Using mass
spectrometry, the protein SPLUNC2 was shown, for the first time, to be associated with Candida
adhesion to acrylic and may provide receptors for C. albicans adhesion to obturator materials.
15
Head and Neck Cancer Therapy. Oral Complications and Potential Management Techniques.
Eric Sung
School of Dentistry, UCLA
Abstract: Head and neck cancers account for approximately 3 percent of all cancers in the United
States. Treatment of this cancer often involves radiation therapy, and increasingly, chemotherapy. We
will review some of the complications associated with this therapy and potential management
techniques to improve the tolerance by the patient. We will also review the theory on the pathogenesis
of ORN and some of the treatment modalities that are currently employed.
2014 Xi’an Conference
57
16
Development and Progress of Craniomaxillofacial Reconstruction
Cai Zhigang, Shan Xiaofeng, Huang Jinwei, Lian Jie, Zhang Jie, Zhang Jianguo, Zhao Fuyun, Zhang Yi, Mao Chi, Peng Xin, Zhang Lei, Wang Yang, Guo Chuanbin, Yu Guangyan
Dept. Oral & Maxillofacial Surgery, Peking University School & Hospital of Stomatology,Beijing, China
Purpose: The craniomaxillofacial tissue defects caused by head neck ablative surgery, osteomyelitis or
severe trauma would physiologically and psychologically affect patients' life quality. However, the
complexity of this regional anatomy makes it a great challenge for plastic surgeons to reconstruct the
facial contour and rehabilitate the occlusal function. With the development of microsurgery, dental
implant, distract osteogenesis and digital surgery, the craniomaxillofacial reconstruction achieved
progress rapidly in the last decades. Nowadays, the optional approaches for craniomaxillofacial
reconstruction include reconstruction titanium plate, nonvascularized bone grafts, vascularized
osteocutaneous flaps and distraction osteogenesis etc. Improvement in microsurgical techniques
refinement of titanium fixation systems, and development of digital surgery techniques have
revolutionized the reconstruction of this area. Functional and aesthetic rehabilitation of the patients
have become a basic goal for clinicians.
Methods: We will introduce some clinical works in our department (Dept. Oral & Maxillofacial
Surgery, Peking University School & Hospital of Stomatology) as following: 1. Reconstruction of soft
tissue defects after head neck ablative surgery. Some vascular free flaps and regional flaps was
introduced, including classification of defects, indications, advantages and disadvantages of different
reconstructive methods were retrospective analyzed. 2. Reconstruction of jaws. For the mandibular
reconstruction to introduce the clinical indications of 4 kinds of method for mandibular restore and
reconstruction, and to discuss the option in midface and maxillary reconstruction according to Brown’s
classification.
Results: With the help of computer assisted surgery technique, patients got much better function and
appearance.
Conclusion: It’s believed that the individual and functional facial contour reconstruction is to be
achieved precisely with the help of computer assisted surgery techniques in the future.
Key words: Craniomaxillofacial reconstruction; Free flap; Regional flap; Reconstruction of jaws;
Digital surgery.
17
Direct 3D Printing of Silicone
Swati Jindal
King's College London, UK
Purpose: Traditionally maxillofacial prostheses are fabricated by hand carving the missing anatomical
defect in wax, and creating a mould into which pigmented silicone elastomer is placed. Modern
technologies have been used to manufacture anatomical face/body parts utilizing computed
tomography (CT) data in conjunction with rapid prototyping (RP) techniques utilizing a hard plastic
resin or thermoformed wax. However, these methods still require moulds into which a biocompatible
pigmented silicone elastomer is placed. The purpose of this paper is to describe the development of
direct printing of two component silicone elastomers suitable for creating facial/body prostheses.
Methods: There are two areas in developing this technology that are intrinsically linked. Firstly, a
custom designed 3D printer with x- y-z gantry robot with an accuracy of 0.1μm was adapted with a
custom designed printing head. Secondly, a two component silicone elastomer suitable for RP that
incorporates the desired characteristics and properties similar to those commercially available for the
2014 Xi’an Conference
58
provision of facial and body prostheses was developed. The silicone is composed of
polydimethylsiloxane (PDMS) chains, filler, catalyst and cross-linker. Varying the amount of these
components the mechanical properties of the silicone elastomer can be altered e.g. tensile strength, tear
strength, hardness and wettability. To achieve these desired properties consideration must also be given
to the set time and viscosity of the silicone elastomer and additionally the speed at which the material is
printed.
Results: A biocompatible pigmented silicone with properties similar to currently used elastomers has
been developed and printed. The hardness can be varied between 10-26 Shore A while the tensile
strength ranges from 1.1 to 3.3 kN/m. The colour and hardness of 3D printed silicone can be varied
through the print process to suit the final application.
Conclusion: This technology has the potential to manufacture complex facial/body prostheses of
similar characteristics to that of current silicone elastomers used in the traditional way. Further research
is needed to ensure appropriate digital colouring of the silicone elastomer to match the patients’ natural
tissues. Ultimately, this would provide the maxillofacial prosthetist with a tool that manufactures prostheses reliably, with less emphasis placed on individual artistic interpretation.
Key words: 3D Printing; Two component silicone.
18
Rehabilitation of Maxillectomy Defects with CAD-RP Obturator Prostheses: A Pilot Study
Jiao Ting, Dong Xian, Zhu Chenyuan
Shanghai JiaoTong University, Shanghai 9 th People’s Hospital
Purpose: Obturator prosthesis is an effective treatment to rehabilitate the maxillary defect for patients
with maxillary defect. In this study a new method is established to design and fabricate an obturator
prosthesis by computer aided design (CAD) and rapid prototyping (RP) technique and evaluate the
functional results of this technique.
Methods: Eleven patients with acquired maxillary defects because of head neck cancer were treated
under a protocol based on 3-D reconstruction, CAD, and RP technologies to fabricate obturator
prostheses. To evaluate the quality of the obturator prostheses and patients’ satisfaction, the Obturator
Functioning Scale (OFS) of the Memorial Sloan-Kettering Cancer Centre was applied.
Results: Each patient got an individualized obturator, which could exactly represent the defective
shape and fit the defect. The obturator could easily fit the defect with little modification and was
suitably placed in the patient’s defective cavity without shifting or swinging. The patients showed good
results in all fields of functional outcomes and social acceptance. The OFS were comparable with the
other studies using traditional methods.
Conclusion: This study combined CAD with RP technology, exploring a new and feasible method for
making individualized obturators for the patients after maxillary resection. The new method has
significant clinical value in that it helps to decrease chair side time needed for both the patients and
prosthodontists and the difficulties in operation and suffering on the part of the patients.
Key words: 3D reconstruction; CAD/CAM; Rapid prototyping; Maxillary defect; Obturator prostheses;
Rehabilitation for head neck cancer.
2014 Xi’an Conference
59
19
Digital Clinical Solution of Presurgical Nasoalveolar Molding (PNAM) for Infant Clefts in FMMU
Wu Guofeng, Feng Xinhua, Zhao Yinmin
Fourth Military Medical University, School of Stomatology, China
Purpose: The aim of this study was to establish a multi-digital approach using latest three-dimensional
scanning, reversed engineering and rapid prototyping techniques for PNAM treatments of infant clefts.
A 3D database for infants’ clefts will be built to survey the growth rules of palatal clefts, which will
direct the design of PNAM digital solution.
Methods: 160 newborn cleft babies within 1 week old with clefts were investigated in this study and
scanned weekly for their facial digital impressions by a new optical scanner until lip repairs.
Meanwhile, plaster models of infants’ palate clefts were also prepared for the scanning to fabricate the
digital palatal models. All the above original data were collected to build a 3D database of infant clefts,
and then carefully compared and documented under a reversed engineering software condition to
observe the laws of development. Three dimensional virtual and rapid prototyping approaches were
applied to realize the individual design and rapid auto-manufacture for the appliances of infant’s
preoperative nasal-alveolar molding. With the new chromatosis technique and special silicone material
of Maxillofacial Prosthetics the simulational face of infant lip cleft were fabricated, which was used for
the simulation surgery and surgical teaching.
Results: The detailed three-dimensional information of infant nasal-lip and palate clefts from 1 week
old to 12 weeks old were successfully acquired, which were part of the 3D database of infants clefts.
According to each patient’s condition, the individual preoperative nasal-alveolar molding programs
were generated and computer fabricated the series alliances directly. The simulatioanl facial model of
lip cleft was designed and prepared for simulation surgery and teaching. The above pictures show the
detailed results of this research. The following pictures show the clinical result of the digital PNAM
clinical solution.
Conclusion: New advanced techniques of industry showed their great values and will reveal more
interests for the clefts researchers. The digital solution in this research will help the physicians to treat
infants’ clefts with facility.
20
Combined Prosthodontic and Surgical Management of Patients with Amelogenesis Imperfecta: Case Series of Two Patients
Ben Omondi
University of Nairobi
Purpose: To demonstrate the benefit of muldisciplinary collaboration in the management of adult
patients presenting with amelogenesis imperfect (AI) but lacking restorative space.
Methods: Impressions were taken using irreversible hydrocolloid ( BluePrintR ) and poured in Type III
gypsum to generate study casts. Using a face-bow record, these were mounted in a semi-adjustable
articulator ( Dentatus ARH). Reference points were made on the casts after careful evaluation by the
prosthodontic and surgical teams. Mock astsurger was rehearsed on one half of the casts but sparing the
palatal/lingual. Base plate wax was adapted on the reduced casts to assess for adequate room for
denture teeth but maintaining the occlusal vertical dimensions.
New set of impressions were taken using irreversible hydrocolloid in custom trays and poured in type
III gypsum to generate working casts. The aforementioned procedure was repeated and selected
complete denture teeth set. The patients approved of the set up before processing and finishing.
Surgical phase was undertaken under general anaesthesia and the dentures fitted intra operatively.
Tissue conditioner (Coe Comfort) was applied to the dentures on the third day post operatively and
2014 Xi’an Conference
60
changed every one week for a month. Thereafter, monthly follow ups for 6 months.
Results: The patients reported satisfaction with the outcome as far as their appearance, ability to
masticate and enhanced self-esteem. Both have since been married and now have babies.
Conclusion: Despite providing a removable option, satisfactory outcome can be possible with a
combined prosthodontic and surgical approach for adult patient with AI but with no prosthetic space.
Key words: Prosthodontic; Surgical; AmelogenesisImperfecta
21
Preoperative Percutaneous Nerve Mapping of the Mandibular Marginal Branch of the Facial Nerve
Lin Bo, Lu Xuguang, Shan Xiaofeng, Zhang Lei, Cai Zhigang
Department of Oral & Maxillofacial Surgery Peking University School of Stomatology
Purpose: In this study, we introduce a reliable method for mapping the location of the mandibular
marginal branch of the facial nerve. The utility of preoperative percutaneous mandibular marginal
branch mapping and continuous intraoperative nerve monitoring during operation with a
submandibular approach are reported.
Methods: The mapping technique was performed in 30 cases. Electromyography surface electrodes
were placed on the orbicularis oris muscles and the ground electrode on the forearm. A modified
bipolar probe with an adjustable distance between the two tips was used to apply surface stimulation at
a frequency of 1 Hz to 2 Hz. The stimulating current most frequently used was 5.0 mA to 5.5 mA. By
moving the electrode at right angles across the suspected path of the nerve around the marginal border
of the mandible, a point is reached where the orbicularis oris contracted and a clear compound muscle
action potential was evoked. Four to five dots were marked and connected to show the complete nerve
course. During the surgery, an intraoperative nerve-monitoring technique was used for positive
confirmation after the nerve had been visually identified.
Results: Satisfactory mapping was achieved in all cases. A positive correlation between the nerve
mapping and operative identification was found. The distance between the nerve branch and the
mandibular marginal border at the point of the facial artery ranged from –28 mm to +5 mm. The nerve
branch was sacrificed in one case because of oncological reasons.
Conclusion: We found that preoperative percutaneous nerve mapping was a successful method of
identifying the location of the facial nerve and could protect the nerve from injury.
Key words: Facial nerve mapping; Mandibular marginal branch; Percutaneous
22
Digital Technology Used in Rehabilitation of Maxillofacial Defects
Gu Xiaoyu, Zhang Fuqiang
9th People’s Hospital, Jiaotong University, Shanghai
Purpose: To explore a course for digital maxillofacial prostheses system, improve the clinical
treatment for maxillofacial defects on patients.
Methods: The patients with maxillofacial defects were scanned by means of structured light projection
and computer tomography (CT). The 3D models were then reconstructed and global registration was
made to merge the acquired models into a new digital model for designing. The 3D design of the
prosthesis was implemented in a 3D software of reverse engineering. "Double mirror technology" and
2014 Xi’an Conference
61
the "anatomic" prostheses designing were proposed during the course of the study and a complete 3D
design process was set up. Then the concept and technique of designing female molds were built to
make the silicone prosthesis indirectly. The parts of female molds were designed according to the 3D
data of the prosthesis, and rapid prototyping (3D printing) technology was then used to machine the
resin molds on the basis of the digital graphics. Finally, silicone for prostheses were filled and cured in
the resin molds to make the clinical restorations for the patients.
Results: 10 patients with varying degrees of maxillofacial defects were rehabilitated by the system
explored in the study, including three patients with nasal defects, two with orbital defects, one with
auricle defects, four with cheek defects as well as a patient with defect on his maxilla. All patients
suffered no pain or discomfort during the treatment; they were satisfied with the final prosthesis of the
adaptation, shape, color, retention, stability, etc.
Conclusion: The digital maxillofacial prostheses system explored in this study provided a new way for
the treatment of the patients with maxillofacial defects in clinic, which showed superior effects to
traditional treatment manners for these kinds of patients.
Key words: Prostheses; 3D design; Female molds; Rapid prototyping.
23
Development of the Combined Finite-element and Rigid-body Analysis Model for the Maxillofacial Prosthodontics
Ho Beom Kwon, Young Jun Lim, SugJoonAhn, Ling Tsou, Antonio Sanchez, Sidney Fels, John
Seoul National University
Purpose: The purpose of the study was to construct three-dimensional computer models composed of
finite-elements and rigid-bodies for the analysis of the maxillofacial prosthodontics and to simulate
functional movements of the musculoskeletal system of head and neck area for the analysis of the
function of the maxillofacial prosthesis.
Methods: Three-dimensional computational models of head and neck area were developed to simulate
functional movements of the stomatognathic system. The sectioned images from the dataset of Visible
Korean Human Project and the Computed Tomography data of the healthy subjects were used for the
construction of computational model. The photographed sectioned images of the Visible Korean dataset
and the raw image data of the Computed Tomography were processed using segmentation software.
Final segmented data were imported into ArtiSynth (The University of British Columbia, Vancouver,
Canada), a three-dimensional biomechanical modeling platform. In Artisynth the model was consisted
of cranium, mandible, hyoid bone, masticatory muscles, infrahyoid muscles, tongue, soft palate, and
pharynx. Bones were regarded as rigid bodies and soft tissues were made of finite element materials.
Finite-element muscle actuators were created to move the models. Using sectioned images imported in
segmentation program, the directions of muscles were defined and transferred to Artisynth. Data on
muscle activations and material properties of the structures from the previous studies were used.
Functional movements including mandibular opening and closing movement and normal
velopharyngeal closure were performed by muscle activations. Kinematic analysis and dynamic
analysis of the models were done.
Results: A combined computer models of rigid body and finite element were created. It was
demonstrated that the mandibular movement could be controlled by the activation of the muscle
actuators. The simulation of the functional movements of the structures including mandibular opening
and closing movements and the velopharyngeal closure were possible.
Conclusion: Three-dimensional computer simulation is suggested to be a useful methods to study the
biomechanics in maxillofacial prosthodontics.
Key words: Finite element; Computer simulation; Rigid body; Maxillofacial prosthodontics Lloyd
2014 Xi’an Conference
62
24
The Evaluation of Measurement Accuracy of Two Different 3D Face-scanner on Healthy Human Faces
Ye Hongqiang, Lv Longwei, Liu Xiaojing, Zhao Yijiao, Zhou Yongsheng
Dept. of Prosthodontics, Peking University School of Stomatology
Purpose: To compare the accuracy, reliability and reproducibility among the structured light scanning
system, stereophotogrammetry system, and caliper measurement on scanning the healthy human faces.
Methods: 10 healthy volunteers were selected for this study. After marking of the facial anatomy
points, the faces of volunteers were scanned by the structured light scanning system and
stereophotogrammetry system, and the 3D images data were reconstructed with corresponding software.
For each subject, the scanning progresses were performed twice after calibration. The linear distances
were measured and compared on the faces using caliper, the images from structured light system and
the images from stereophotogrammetry system. Absolute errors (AE), absolute percentage errors (APE)
and intraclass correlation coefficients (ICC) were chose as index to evaluate the accuracy, reliability
and reproducibility of the two different 3D scanning systems.
Results: There was no statistical difference among results acquired by three estimation methods (P
value: 0.891 to 0.999). Both of the scanning system presented high accuracy (AE 0.58±0.37mm and
APE 1.11±0.73% for the structured light scanning system; AE 0.62±0.39mm and APE 1.17±0.71% for
the stereophotogrammetry system). The two scanning systems also showed extremely high reliability
compared to caliper measurement (ICC value: 0.982 to 0.998 for the structured light scanning system;
0.984 to 0.999 for the stereophotogrammetry system). And high reproducibility was also presented by
the two scanning systems (ICC value: 0.981 to 0.999 for the structured light scanning system; 0.984 to
1.000 for the stereophotogrammetry system).
Conclusion: When applied in scanning and measuring of healthy human faces, the structured light
scanning system and stereophotogrammetry scanning system both present high accuracy, reliability and
reproducibility.
Key words: 3-dimensional scanning; Structured light; Stereophotogrammetry; Healthy human faces.
25
Application of Computer Aided Technique in the Rehabilitation of Complicate Oral-Maxillofacial Defect and Deform
Bai Shizhu, Wu Qin, Liu Yanpu, Zhao Yimin
School of Stomatology, the Fourth Military Medical University
Purpose: Patients with maxillaryor mandibular defects need surgical reconstruction and further
prosthodontics rehabilitation for satisfactory aesthetic and functional outcome. There have always been
some patients who had surgical bone reconstruction in improper position, and have troubles or even fail
to complete prosthodontic rehabilitation. The prosthodontists have always wished to gain closer
collaborations with surgeons and confront these complicated challenges together; if every reconstructed
bone could achieve its ideal position from surgical reconstruction, every patient would satisfy with his
final denture in cosmetic and function.
Methods: Preoperative virtual planning, computer aided design, a bridge between prosthodontics and
surgical reconstruction, makes it possible to overcome this thorny problem. Now we design and
fabricate template prosthesis for the patient preoperatively, and integrate the data of the prosthesis to
the patient’s 3D skull model by CT scanning. Discussion will be made with surgeons to determine the
final treatment plan by the help of the software, according to the actual condition of the defect and the
prosthesis. Then surgery guide templates will be designed and manufactured by rapid prototyping
technique, and thus accurately convert the pre-surgery design into actual surgery procedure.
Results: All the treatment procedures and outcomes by far have proved that, with the method
2014 Xi’an Conference
63
mentioned above, close and effective preoperative communications and collaborations between
prosthodontists and surgeons could be made to determine the optimal treatment plan, and thus achieve
the prosthesis-guided surgery reconstruction. In this way patients could get shorter treatment cycle,
more-reliable outcome, and better treatment quality. Meanwhile, with the help of the surgical templates,
the operation procedure becomes easier, time shorter, and the trauma made to the patient can be greatly
reduced.
Conclusion: Through our dedicated efforts, this method is being improved and used more and more.
Hopefully it will become one of the routine therapy techniques of our hospital.
Key words: Computer aided design; Oral-maxillofacial defect; rehabilitation.
26
A Case of Fixed Prosthesis with Autologous Ilium Bone Free Graft Auxiliary GBR to Restore Severe Defects of Maxillary
Yang Sefei
Department of Stomatology, Chinese PLA General Hospital
Purpose: To report a case of fixed prosthesis with autologous ilium bone free graft auxiliary GBR to
restore severe defects of maxillary.
Method: Basic situation: patient, masculinity, 67 years old, Clinical time: 2013-2. Severe defect of
maxillary including the area of 16 to 21 on account of car accident 15 years ago, the height of alveolar
crest to vestibular groove less than 5mm, CBCT show that the width of buccolingual is 0.3-1.6mm and
the horizontal defect is to 1/3 of root apex in defects of bone area. The range of opening mouth is
3.5cm. The patient required strongly to restore the defect by fixed prosthesis which supported by
implant.
Results: Treatment plant : 1.Take the left autologous ilium to free graft to the area of defect of
maxillary ; 2. Take Double deck membrane technology with bone meal locally to obtain ample bone
increment amount ; 3. The area of 16、15、14、21 placed one-stage implant; 4. Restore the lost
natural dentition by fixed prosthesis.
Conclusion: Treatment effect: 1. After operation of autologous ilium bone free graft with titanium
mesh and collagen membrane, the width and height of the alveolar was increased, but the increase of
the width was more obvious. The healing of the side of ilium was bad, with pit shape defects witch
diameter was about 4mm; 2. When placed the implant, there had enough bone mass to sport after 5
month, could place the implant with conventional diameter and length according to ideal angle and
direction; 3. Make the fixed bridge only need a bit of false gingiva after two-stage operation , which not
only artistic but also can restore the function of mastication when put it into the patient oral.
27
Immediate Implant-retained Prosthesis Following Radicalmaxillectomy
Liao Guiqing
Guanghuaschool of stomntology, Hospital of stomntology, Sun Yat-sen University
Purpose: The maxillary defect after tumor resection typically involves the mucosal defect and the mid-
face osseous framework damaged. Reconstruction of this defect remains a considerable challenge
because the 3-dimentional architecture of midface serves both function and aesthetic role. This article
describes the maxillofacial rehabilitation of a patient diagnosed with recurrence ameloblastoma.
Methods: The surgery consisted of a large amount of maxillary bone and soft tissue resection. During
2014 Xi’an Conference
64
the surgical healing, zygoma and nasal implants were inserted in a two-step procedure. The immediate
maxillary prostheses were installed and fixed by a titanium framework. With the bone and soft tissue
remodeling, the immediate maxillary prostheses were replaced by a new one at post-operation 3
months. 6 months after operation, the second stage of implant procedures were carried out. The
ultimately maxillary prostheses were fixed by the titanium framework.
Results: After 2 years follow-up, no recurrences were observed. The patient has a good result in
aesthetic, functional, stability, and did not complaint any discomfort. Tissues around implants were in
good health, and the prostheses remained well-fitted. The patient was extremely satisfied with the final
result.
Conclusion: The immediate implant-retained prostheses are well accepted by the patient, improving
comfort and safety during function while recovering her esthetic appearance
Key words: Immediate; Implant-retained; Prostheses; Maxillary defect.
28
Effects of Titanium-nanotubes Surface Modified by Estrogen-loaded Solid Lipid Nano-particles: An Invitro Study
Gao Yan, Liu Ying, Zhou Lei, Xu Shulan, Zhao Yadong, Deng Yue, Du Bing
Center of Oral Implantology, Guangdong Provincial Stomatological Hospital, Southern Medical University
Purpose: Challenges exist in improving early osseointegration. The present article was to investigate
the effect of local delivery system of estrogen-loaded solid lipid nano-particles (SLN) on titanium-
nanotubes (TNT) surface
Methods: Estrogen-loaded SLN were prepared by multiple emulsion-solvent diffusion technique, TNT
surfaces fabricated by anodic oxidation was then modified by this local delivery system. An in vitro
release experiment was conducted to evaluate the sustained release of estrogen. The particle size and
morphology of estrogen-loaded SLN were measured by laser particle size analyzer and transmission
electron microscope respectively. The osteoblast-like MG-63 cells were used in present study, cell
attachment, spread, proliferation, ALP activity and mineralization assay were performed to assess the
early cell response
Results: Estrogen-loaded SLN (60 nm in diameter) were loaded on TNT (80-100 nm in diameter and
500nm in length) surfaces. This delivery system can be achieved a sustained release of estrogen up to
120 h and has a better sustained release effect than the TNT surfaces alone. Estrogen-loaded SLN TNT
surfaces accelerated the attachment of MG-63 cells, nearly twice higher than the control group. Spread
and cytoskeletal development of cells on the TNT surfaces modified by estrogen-loaded SLN appeared
to be greater than the TNT surfaces. Enhanced cell proliferation and differentiation happened on the
estrogen-loaded SLN TNT surfaces. At days 14 and 21 of culture, the area of mineralized nodule
assayed by alizarin red staining was also greater on the estrogen-loaded SLN TNT surfaces, exhibiting
an increase of 80% at day 14 especially.
Conclusion: TNT surfaces modified by estrogen-loaded SLN enhanced the cellular early osteogenic
capability, suggesting this delivery system not only enabling more rapid establishment of
osseointegration at interface of titanium and bone, but also as a drug delivery systems to treat
osteoporosis
Key words: Solid lipid nano-particles; Titanium; Delivery system; Osseointegration.
2014 Xi’an Conference
65
29
The Use of Zygomaticus Implants in the Compromised Patient: Review and Patient Report
Jay Jayanetti
LSU School of Dentistry, Department of Prosthodontics
Purpose: The zygomaticus implant was designed to allow for implant restoration of the extremely
atrophied maxilla, while circumventing the need for bone augmentation procedures, the most popular
of which is the external sinus lift. Other bone augmentation procedures include onlay block grafts, and
Le Fort osteotomy with interposed bone graft.
Methods:Grafting procedures may require donor site surgery and increased treatment time. The
usage of the zygomaticus implant has been expanded to the rehabilitation of near total and total
maxillectomy patient. Implant success in such patients are reduced on account of postresection
radiotherapy.
Results:In our literature search, the use of zygomaticus implants in the unrepaired cleft palate patient
has yet to be reported. Zygomaticus implants were used to rehabilitated the cleft palate patient by
supporting an obturator by means of the bar and clip concept.
Conclusion: In the two reported cases; Esthetics and masticatory functions were restored nasal
regurgitation corrected; And speech intelligibility improved.
30
Implant-Supported Intraoral Prostheses Retained by Bar-Clip Attachment Following Distraction Osteogenesis after Block Resection of Mandible in A Case of Squamous Cell Carcinoma of the Floor of the Mouth
Tang Chunbo
Stomatological Hospital of Nanjing Medical University
Purpose: To report a 56 years old male patient with distraction osteogenesisafter mandible block
resection because of squamous cell carcinoma of the floor of the mouth and to evaluate the functional
and esthetic outcome after rehabilitation with implant-supported intraoral prostheses retained by bar-
clip attachment.
Methods: A dentition defect patient diagnosed with squamous cell carcinoma of the floor of the mouth
previously treated with mandible block resection and distraction osteogenesis. The treatment consisted
of a large amount of anterior mandible resection, so distraction osteogenesis was carried out before
implant surgery. After 14-day distraction osteogenesis and kept the distractor for 8-month, four Nobel
Replace implants were inserted in the spots of left middle incisor, left canine, right lateral incisor and
right first premolar. Four months later, the implant-supported intraoral prostheses retained by bar-clip
attachment were installed after custom impression.
Results: There was enough bone for implants after distraction osteogenesis and the prostheses
remained well-fitted. The implant-supported prostheses retained by bar-clip attachment had excellent
stability and retention which improved the quality of life, and the patient was satisfied with the final
result.
Conclusion: Maxillofacial defect requires special care in rehabilitation. The use of distraction
osteogenesis and bar-clip implant-retained prostheses obtains excellent functional and esthetic results.
The implant-retained prostheses are well accepted by the patient, improving safety and comfort during
function while recovering his esthetic appearance.
Key words: Maxillofacial Rehabilitation; Implant; Custom Impression; Bar Clip Retention; Squamous
Cell Carcinoma of the floor of the mouth.
2014 Xi’an Conference
66
31
Fabrication of Surgical Templates for Orbital Implant Placements and Orbital Rehabilitation
Chen Songling
The First Affiliated Hospital of Sun Yat-sen University, Guangzhou.
Purpose: Implant placement in orbital sites is challenging because of limited bone volume and poor
bone quality.
Preoperative optimal implant planning and intraoperative guides are important to ensure success. This
article describes the use of computer simulation for implant insertion and fabrication of a surgical
template as a drilling guide for orbital implant placement
Methods: 7 patients with a right orbital defect underwent computerized tomographic scanning, and the
data were processed with interactive software to simulate orbital implant placement. A surgical
template that served as a drilling guide was designed and fabricated to transfer orbital recipient site
information from the three-dimensional computer model into the actual orbital implant sites.
Results: The craniofacial implants were placed in the predictable positions. No unexpected
complications or injuries were encountered during the surgery. Magnetic abutments were attached to
the implants 2 weeks later. The definitive facial prosthesis was fitted 6 months later, with excellent
esthetic results.
Conclusion: The computer-designed surgical template contributed to the success of these treatments.
Key words: Key words: computer-aided design; Computer-assisted manufacture; Craniofacial implant;
Orbital; Defect; Surgical template.
32
ALT Flap in the Reconstruction of Defects in Head and Neck Region
Wei Jianhua, Cheng Xiaobing, Lei Delin
State Key Laboratory of Military Stomatology, Department of Oral and Maxillofacial Surgery, School of Stomatology, the Fourth Military Medical University, Xi’an 710032, China
Purpose: The purpose of this study was to explore the clinical application and therapeutic efficacy of
head and neck defects reconstructed with anterolateral thigh (ALT) flaps after ablative cancer surgery.
Methods: From May 2013 to May 2014, 33 patients with varied head and neck defects resulting from
resection of malignant tumor underwent reconstruction with the ALT flap at our
center. The surgical anatomy, flap design, as well as flap raising technique are described, and the
outcome is reported.
Results: 13 flaps were myocutaneous flaps, others are fasciocutaneous flaps. According to the defects
needs, ALT flaps were tailored as thinned flap, fasciocutaneous flap, myocutaneous flap, splitted flaps
in through and through defects or combined with AMT flap in very large defect. Two patient with
venous thrombotic events required operative exploration. All 33 flaps were successful based on a 1 to
3 perforator for reconstruction of defects. In 32 cases, the donor site was closed primarily for
the ALT flap, leaving only a linear scar, and the thigh had no functional deficit.
Conclusion: The free ALT flap has good pliability and bulky volume. It can be tailored easily to adapt
the defects in head and neck defects. This flap presents high successful rate, good functional results at
the recipient site with the additional advantages of minimal donor-site morbidity, and a high level of
patient satisfaction.
2014 Xi’an Conference
67
33
35 Years with Osseointegrated Facial Prostheses – History & Developments
Kerstin Bergstrom
Department of Otolaryngology Sahlgrenska University Hospital
Purpose: Bone-Anchored prosthetics have advanced the rehabilitation of patients with defects from
cancer therapy, malformation or trauma. 1979 the first patient was provided with an auricular
osseointegrated craniofacial prosthesis in Gothenburg, Sweden.
During 35 years the technique has developed and new possibilities for reconstruction have opened.
1983 the first child got osseointegrated fixtures for an auricular prosthesis.
Methods: 31 years follow up and what happens when children grows up will be presented. Every day
life, phsycological and functional aspects will be discussed.
Teamwork and treatment planning is important for the final functional and aesthetic outcome of the
restoration. Computer - aided surgical and prosthetic planning has further increased the possibility of
optimizing the results.
Results: Rehabilitation of patients with combined extraoral and intraoral defects is more difficult and
requires even more from the professional treatment team. The use of extra oral skin penetrating
implants is regarded as a safe and predictable procedure for anchoring facial prostheses.
Conclusion: Future developments to further improve the rehabilitation and quality of life for our
patients is what we are striving for.
34
Preliminary Analysis on Free Flap Re-exploration
- Beijing’s Experience
Zhang Lei, Wang Yang, Peng Xin, Mao Chi, Zhang Jie, Cai Zhigang
Department of Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology, Beijing, 100081, China
Purpose: Microvascular free tissue transfer became the reliable and most popular method to
reconstruct the big or complex surgical defects of head and neck region. With the advancement of
microsurgery techniques, the success rate of free flap is rising to 90-98%. But there were still a small
risk. Microvascular free tissue transfer became the reliable and most popular method to reconstruct the
big or complex surgical defects of head and neck region. With the advancement of microsurgery
techniques, the success rate of free flap is rising to 90-98%. But there were still a small risk of flap
compromise necessitating re-exploration, with a rate from 10.5% to 11.85% mainly owing to vascular
thrombosis. If the pedicle thrombosis cannot be detected in time and managed properly, severe
complication will happen because of the flap failures. The purpose of this study was to review our
experience on the free flap re-exploration based on the free flaps in the past 3 years.
Methods: A retrospective review of all the free flaps performed from 2010 – 2012 in the department of
Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology. All of the cases
which required emergent re-exploration were identified, and the related clinical data on vascular
complications and methods used for their management were recorded and analyzed.
Results: A total of 962 free flaps were performed during the study period, of which 75 cases required
emergent re-exploration. The re-exploration rate was 7.8%. The most common causes for re-
exploration were pedicle thrombosis. Forty-five cases were salvaged successfully and other 30 flaps
failed finally, which the successful salvage rate was 60%. The overall flap survival rate was 96.9%.
Venous thrombosis was more common than arterial thrombosis (9:1) and had a higher salvage rate
(4.5:1). Most of the emergent re-explorations (78.7%) were performed within 48 hours after the
2014 Xi’an Conference
68
microvascular free tissue transfer, which was called the more dangerous postoperative 48 hours. The
delayed vascular thrombosis which happened after 72 hours was difficult to be detected immediately
and salvaged successfully. The quicker the vascular thrombosis was detected and managed, the better
the free flap reoperation result was. Six hours is critical for the free flap salvation.
Conclusion: Microvascular free tissue transfer is a reliable reconstructive technique with low failure
rates. Selection of suitable cases, proper donor vessel and plenty microvascular surgical experience
were the basic elements on flap success. Careful monitoring and urgent re-exploration were critical for
the salvage of free flaps. The majority of venous thromboses can be salvaged easier than arterial
thromboses. The delayed vascular thrombosis was more problematic and difficult to be salvaged.
35
Facial Prostheses Retained on Basally Osseointegrated Implants (BOI)
VojkanLazić, Vitoamir Konstantinović, Igor Djordjević
University of Belgrade, Serbian
Purpose: The use of osseointegrated implants for retaining the maxillofacial prostheses revolutionary
improves their stability and thus increases the quality of life of the patients. However, some specifics of
maxillofacial implantology could tempt some problems in everyday practice. They are: close
anatomical relation to the intracranial structures; less bone quality and quantity; mainly compact bone;
irradiated tissue. All of that sometimes limits usage of conventional screw like implants. The goal of
this lecture is to present our experiences with facial prostheses retained on basally osseointegrated
implants (BOI).
Methods: Two designs of BOI implants are used. Disk implants and bicortical screws (BCS). Specifity
of this type of implants is bicortical or multicorticalosseointegration in the basal, resorption free bone.
In the last 8,5 years period (follow up 6 months-8,5 - years), 107 BOI implants were inserted for extra
and intraoral maxillofacial prostheses anchorage in 38 patients, in nonirradiated (23) as well as in
irradiated patients (15). For nasal prosthesis anchorage, 30implants were placed in 12patients. In 17
patients, 42 implants were placed for orbital prosthesis. For intraoral prosthesis, in 9 patients, 36
implants were inserted.
Results: Overall implant survival rate for irradiated patients is 80%. For nonirradiated patients, results
are much better (survival rate 98%).
Conclusion: Basally osseointegrated (BOI) implants present an excellent solution for maxillofacial
prostheses anchorage, particularly in irradiated patients.
Key words: Basally osseintegrated implants; Facial prostheses.
36
Long-term Result of Reconstruction of Mandible Continuity with Fibula Free Flap and Implant Borne Dental Rehabilitation
Fang Wei, Liu Yanpu, Ma Qin, Zhao Yimin
Department of Implant Dentistry , Department of Oral and Maxillofacial Surgery, Department of Prosthodontics, School of Stomatology, Fourth Military Medical University
Purpose: To evaluate the retrospective outcomes of implant borne dental rehabilitation in patients with
mandibular defects reconstructed with fibula free flap (FFF).
Methods: Patients and methods: 74 patients with segmental mandibular defects were enrolled in this
cohort study. Defects in these patients were caused by oral neoplasm, trauma and osteoradionecrosis.
2014 Xi’an Conference
69
They were treated by FFF and dental implant borne prostheses between 1988 and 2010. All patients
were available for continuous follow-ups. Clinical and radiographic data was evaluated; Kaplan-Meier
survival curve and Poisson Regression analysis were used to evaluate implant survival parameters.
Results: Nine patients (12.1%) developed fibular graft complications postoperatively, three in donor
sites, six in recipient sites. 192 implants were inserted. 18 implants failed (9.3%). Overall implant
survival in patients was 93.9%, 92.1%, and 86.8% after 5, 10, and 20 years respectively. In 152
implants, probing depth (PD) ranged from 2-3mm. In 31 implants, PD was greater than 5 mm. Of nine
implants, PD was greater than 7mm. The highest implant failures were expected for men (OR = 1.10–
7.85; p = 0.031), patients received primary FFF reconstruction, (OR = 1.16–11.73; p = 0.027) and for
patients who received radiotherapies (OR = 1.40–19.7; p = 0.014)
Conclusion: FFF and implant borne prostheses proved to be reliable approaches for rehabilitation of
mandible defects and oral function. The overall postoperative FFF and peri-implant complication rates
proved to be low. Regular follow up visits and proper oral hygiene maintenance contributed to the
long-term successful treatments.
37
Sub-periosteal Dissection with Denture-Guided Secondary Epithelialization: Case Sereis of A Novel Method for Peri-Implant Tissue Managementin Reconstructed Mandibles
P. C. Jacob, Vinay V. Kumar
Mazumdar Shaw Medical Center, Bangalore, India
Purpose: In patients with mandibles reconstructed using the free fibula flap, management of peri-
implant soft tissues is often a clinical problem. This paper intends to present a case series of a new
treatment technique, namely ubperiosteal dissection and denture-guided secondary epithelialization
(SD-DGSE) as a method of peri-implant soft tissue management in patients with reconstructed
mandibles.
Methods: Between July 2011 and July 2013, eleven patients had undergone SD-DGSE procedure to
improve soft tissues for implant assisted oral rehabilitation. The procedure consisted of subperiosteal
dissection with vestibuloplasty, simultaneous placement of tissue level implants, and immediate
loading of the implants with a treatment denture retained on ball abutments. The intaglio surface of the
treatment denture was relined at the time of surgery to accomodate the elliptical matrix as well as to
conform closely to the tissue surface thereby guiding the formation of soft tissues.
Results: A total of eleven patients (with 32 implants) were treated with this technique. These patients
had resection surgeries for benign pathologies reconstructed using a single barrel fibula. Five patients
had skin lining (osseomyocutaneous flaps) whereas six patients had primary closure with intraoral
mucosa. All patients had presented with increased thickness of soft tissue, insufficient vestibular space
and no attached mucosa.
Following SD-DGSE, granulation tissue was seen to fill the fibula in approximately one months time
which matures and forms fixed keratinized mucosa in four months time. All patients had stable, fixed
and keratinzedperi-implant mucosa with sufficient vestibular space after a period of 6 months.
Conclusion: SD-DGSE is an easy and predictable method of achieving healthy peri-implant tissues in
selected patients with reconstructed mandibles. The advantages of this procedure include avoidance of
soft tissue grafts, better oral hygiene maintenance and immediate functional rehabilitation.
Acknowledgement: This study was partially funded by the International Team for Implantology, Basel.
Key words: Implant supported overdenture; Maxillofacial rehabilitation; Peri-implant soft tissue.
2014 Xi’an Conference
70
38
Cell Homing Strategy For Bone Tissue Engineering Based on the Cooperative Actions of Simvastatin and SDF-1α-a Potential Application in Maxillofacial Rehabilitation.
Zhou Yongsheng, Liu Yunsong, Ou Mengen
Dept. of Prosthodontics, Peking University School of Stomatology
Purpose: The purpose of this study was to investigate the cooperative effects of simvastatin (SIM) and
stromal cell derived factor-1a (SDF-1α) on the osteogenic and migration capabilities of mesenchymal
stem cells (MSCs), and construct a seed cell-free bone tissue engineering system comprising SIM,
SDF-1α and scaffold which will be promising for application in maxillofacial rehabilitation.
Methods: The effects of simvastatin (SIM) on the proliferation and osteogenic differentiation of mouse
bone marrow MSCs were investigated and its effect on the chemotactic capability of SDF-1α was also
examined by a transwell cell migration assay. Next, a novel cell-free bone tissue engineering system
using PLGA loaded with SIM and SDF-1α was constructed, and applied in critical-sized calvarial
defects in mice. New bone formation in the defect was evaluated by micro-CT, HE staining and
immunohistochemistry. Then the possible mechanisms under which if SIM and SDF-1α can increase
MSCs’ migration and homing, promote angiogenesis, and enhance the expression of BMP-2 in newly-
formed bone tissue in vivo were also investigated.
Results: We found that 0.2 mM SIM significantly increased alkaline phosphatase activity (P < 0.05) of
mouse bone marrow MSCs with no inhibition of cell proliferation, and enhanced the chemotactic
capability of SDF-1α(P < 0.05). Next, we constructed a novel cell-free bone tissue engineering system
using PLGA loaded with SIM and SDF-1α, and applied it in critical-sized calvarial defects in mice.
New bone formation in the defect was evaluated by micro-CT, HE staining and immunohistochemistry.
The results showed that PLGA loaded with SIM and SDF-1a promoted bone regeneration significantly
more than controls. We investigated possible mechanisms, and showed that SDF-1αcombined with SIM
increased MSC migration and homing in vivo, promoted angiogenesis and enhanced the expression of
BMP-2 in newly-formed bone tissue.
Conclusion: SIM enhances the chemotactic capability of SDF-1a and the cell-free bone tissue
engineering system composed of SIM, SDF-1a and scaffold promotes bone regeneration in mouse
critical-sized calvarial defects. This tissue engineering construct is promising for future application in
maxillofacial rehabilitation.
Key words: Simvastatin; Stromal cell-derived factor 1; Bone tissue engineering; Cell homing;
maxillofacial rehabilitation.
39
Human Freeze-dried Dentin Matrix As a Biologically Active Scaffold for Tooth Tissue Engineering
Wang Fang, Wu Guofeng, Zhao Yimin
School of Stomatology, Fourth Military Medical University
Purpose: Dentin is one of the main components of teeth and has been used as an active scaffold to
accommodate odontogenic cells. However, although allogenic dentin has a low immunogenicity, its
biological molecules are at risk of being damaged during storage and transportation. In this study, we
developed a modified freeze drying technique to prepare a freeze-dried dentin matrix (FDDM) that
preserves the bioactivity of dentin but minimizes the immune responses of outside cells.
Methods: The mechanical properties of FDDM were determined, including the compression resistance,
flexural strength, flexural modulus, and microhardness. Dentin (D) and hydroxyapatite/tricalcium
phosphate (HA) samples were used as controls. Similarly, various biological characteristics, including
cell morphology, cell proliferation, collagen secretion, and gene and protein expression, were
2014 Xi’an Conference
71
investigated using various in vitro testing models. To assess the inductive capacity of FDDM in vivo, a
combination of FDDM and human dental pulp stem cell (DPSC) sheets were subcutaneously implanted
in the dorsal pocket of nude mice. At 8 weeks post-implantation, the transplants were removed and
histologically studied.
Results: FDDM has mechanical and biological characteristics similar to those of dentin (P>0.05).
DPSCs cultured on FDDM and dentin demonstrated superior attachment, growth, viability, and
collagen secretion ability but decreased mineral capability compared to DPSCs cultured on HA
(P<0.05). Histological results show that FDDM, which is similar to dentin, supported dentin-pulp-like
tissue regeneration in vivo, as demonstrated by the related expression of dentin markers, such as DSP
and ALP.
Conclusion: These results suggest that FDDM constitutes a novel bioinstructive scaffold for tooth
tissue engineering.
Key words: Freeze dried; Tissue engineering; Dentin
40
Comparison of Tissue Engineered Bone Substitutes for Native Bone Augmentation -An in Vivo Study
Vijayalekshmi Manju
Dept of Prosthodontics &Implantology,Amrita School of Dentistry, Amrita Institute of Medical Sciences, India
Purpose: Augmentation of alveolar bone is required for patients with resorbed ridges and for those
who have undergone surgical reconstruction with free vascularized flaps. Although autologous bone is
the gold standard for augmentation, donor site morbidity and restricted availability generated the
need for the development of bone substitutes .The present research done in animal models would
ultimately help to clinically utilise tissue engineered bone with good regeneration potential and
mechanical strength to augment the native bone. This would prove value in prosthetic rehabilitation
using dental implants as well as an economic option for bone augmentation.
The aim of the study is to characterize and compare two tissue engineered hydroxyapatite (HA) based
biomaterials with sufficient strength for the native bone augmentation.
Methods: Five New Zealand white rabbits underwent surgery to create a 10x3x3mm trough in femur.
Rabbits were selected due to the fast cellular regeneration similar to the regeneration potential of
alveolar bone. Synthesis and characterization of hydroxyapatite based composite scaffolds were
done.Scaffold A (sc A) - Nanocrystalline hydroxyapatite were synthesized by aqueous precipitation
method, mixed with gelatin and PLLA electrospun sheet.Scaffold B (sc B) Layered biphasic calcium
phosphate discs (60% Hydroxyapatite and 40% Tricalcium phosphate) with osteogenic-angiogenic
interphase.The mesenchymal stem cells were seeded onto HA based composite scaffolds and induced
to differentiate into osteogenic lineage by providing osteogenic supplements. Bone height was
measured radiographically and regeneration potential was studied histologically from scaffolds of one
limb in first and third months. Mechanical strength was evaluated at third month.
Results: The regeneration potential of both Scaffolds A and B was almost similar. However, the
complete resorption was noticed in the Scaffold A compared to B as noticed by Computed Tomography.
Using the three point bend test there was significantly higher mechanical strength for scA (110-120Mpa)
in wet state than sc B (40Mpa).
Conclusion: Tissue engineered bone with gelatin-HA and electrospun PLLA sheet (scaffolds A)
showed adequate mechanical properties and better bone regeneration for augmentation of native bone.
Key words: Tissue engineering; Maxilofacial rehabilitation; Bone augmentati.
2014 Xi’an Conference
72
41
Mechanism of Human Oralfacial Fibro-osseous Disease and in Vivo Mouse Model Development Based on Disease-specific iPSCs
Qin Haiyan, Qu Cunye, Wang Zhongshan, Ji Jun; Li Bei, Sun Guowen , Hu Qingang, Shi Songtao
Stomatological Hospital Affiliated Medical School, Nanjing University
Purpose: This study tries to uncover the mechanism of human oralfacial fibro-osseous disease and
develop animal model in vivo based on iPSCs derived from patient-specific mesenchymal stem cells.
Methods: Ossifyng fibroma(OF) is taken as an example of oralfacial fibro-osseous disease. Primary mesenchymal
stem cells were cultured from surgically resected OF samples, the differentiation, proliferationetc were compared
with normal jawbone MSC(JMSC).Global geneprofile of OFMSC and JMSC were compared using
microarray and cluster analysis. Elisa and westernblot were performed to verify the result from microarray
and ingenuity pathway analysis. iPSCs reprogrammed from OFMSCs were subcutaneously transplanted into
immunocompromised mice with hydroxyapatite-tricalcaium phosphate (HA/TCP).
Results: Ossifying fibroma contains mesenchymal stem cells,which exhibited decreased differentiation and
elevated proliferation.TGFβ signaling is highly activated in OFMSCs; TGFβ inhibits BMP signaling to reduce
bone formation and activates notch signaling to enhance stromal tissue growth; upregulation of TSP1 contributes
to activation of TGFβ signaling in OFMSCs. Histonedemethylation JHDM1D-mediated TSP1/ TGFβ/SMAD3
autocrine loop contributes to TGFβactivation.Establishment of TSP1/ TGFβ/SMAD3 autocrine loop converts
normal MSCs to OF-like MSCs. iPSCs reprogrammed from OFMSCs subcutaneously transplanted into
immunocompromised mice with hydroxyapatite-tricalcaium phosphate(HA/TCP) can mimik OF
pheneotype.
Conclusion: Activated TGFβ signaling in ossifying fibroma mesenchymal stem cells contributes to
osteogenesis deficiency and elevated proliferation; ossifying fibroma in vivo animal model can mimik
phenotype.
Key words: Fibro-osseous disease; Pluripotent stem cells; in vivo animal model; Ossifying Fibroma.
42
The Effect of a Novel HDAC3-selective Inhibitor on Osteogenic Induction of Human Adipose Derived Stem Cells
Lu Wei, Ji Kun, Sushmita Saha, Aiden Hempshall, Ronald Grigg, Jennifer Kirkham, Jin Yan, Yang Xuebin
Department of Dentistry, The 461 Hospital of PLA, Changchun, Jilin 130021, P. R. China
Purpose: Histone deacetylases (HDAC) are regarded as important defining the epigenetic program
during the lineage differentiation of stem cells. A better understanding of this epigenetic mechanism,
that governs osteogenic differentiation of human adipose-derived stromal cells (hADSCs), would
promote/improve bone tissue engineering research and provide new insights into the modulation of
hADSC-based therapy. The aim of this study was to investigate the effect of a novel HDAC3-selective
inhibitor (MI192) on hADSC proliferation and osteogenic differentiation in vitro.
Methods: This study investigated the effect of a novel HDAC3-selective inhibitor (MI192) (5-200 uM)
on hADSC proliferation and osteogenic differentiation in vitro. Optimization of the best concentration
of MI192 and time of pretreatment for osteogenic induction. Osteogenic differentiation of hADSCs was
confirmed by alkaline phosphatase (ALP) staining. Investigate the best concentration of MI192 on the
effect of hADSC by cell cycle analysis, quantitative assay for alkaline phosphatase specific activity and
real time RT-PCR.
Results: The results showed that high concentration (10-200 uM) of MI192 inhibited the proliferation
of hADSC which was concentration dependent. However, after pretreatment with MI192 for 1-4 days,
2014 Xi’an Conference
73
the alkaline phosphatase positive cells were increased in the osteogenic culture group compare to
negative (basal medium) and positive controls (osteogenic medium) without MI192 pretreatment,
which indicated MI192 enhanced osteogenic differentiation of hADSCs. This effect was dose
dependent. The optimal concentration and pretreatment time of MI192 for hADSC osteogenic
induction were 30 μM and two days representively. ALP specific activite was measured using
biochemical quantitative assay to confirm that Osteogenic induction of by pretreatment with MI192 (30
μM) for two days significantly enhanced hADSC osteogenic differatiation (P<0.05) compare to non-
pretreated group. Real-time PCR analysis revealed that MI192 pretreatment upregulated Runx2, Col1,
and OCN expression of hADSC under osteogenic induction. In contrast, valproic acid (VPA), a non-
selective HDAC inhibitor, did not show any notable effect on osteogenic differentiation on hADSC.
DNA flow cytometric analysis indicated that two days pretreatment with MI192(30μM) resulted in
G2/M arrest in hADSC. The G2/M arrest was reversible.
Conclusion: Our results suggest that MI192, via inhibiting HDAC, can influence cell cycle to enhance
hADSC osteogenic differentiation, and thus could be useful for in vivo bone engineering. This method
may have advantages compared to gene therapy and using human recombinated growth factors such as
bone morphogenetic proteins.
Key words: Histone deacetylase inhibitor; MI192; Adipose derived stem cells; Osteogenic
differentiation; Cell cycle; HDAC-3; Valproic acid.
43
Physicochemical Propertiesand in Vitromineralization of Porous Polymethylmethacrylatecement Loaded with Calcium Phosphate Particles for Bone Reconstruction
Sa Yue, Yang Fang, Sander Leeuwenburgh, Joop Wolke, Ye Guang, Joost R. de Wijn, John A. Jansen, Wang Yining
Department of prosthodontics, Hospital of Stomatology, Wuhan University, PR China
Purpose: To evaluate the effects of calcium phosphate (CaP) particle size and composition on the
physicochemical properties and mineralization ability of porous polymethylmethacrylate(PMMA)/CaP cementsin
vito.
Methods: Two types of CaP particles of different sizes (1-30 µm and 0.5-1 mm, respectively) were
loaded into PMMA cements exhibiting an interconnected porosity created by mixing with
carboxymethylcellulose(CMC).
Results: Maximum polymerization temperature internal structure porometricalcharactersand particle
distribution of cements was evaluated and the cured cements were subsequently immersed into
simulated body fluid to assess their changes of phase composition, mechanical properties and potential
bioactivity.
Conclusion: The incorporation of CaP particles did not influence the maximum polymerization
temperature of the porous PMMA, but reduced the porosity and the average pore size. Small CaP
particles formed agglomerations within the PMMA pores, whereas the big CaP particles were partially
embedded in the PMMA matrix and partially exposed to the pores. Both types of CaP particles
enhanced the mineralization capacity of PMMA cement without compromising their mechanical
properties. Porous PMMA/CaP cement hold strong promise for surgical application in bone
reconstruction.
Key words: Porous polymethylmethacrylate; Calcium phosphate; Cement; Bonereconstruction
2014 Xi’an Conference
74
44
Study on Cnstruction and Biological Effects of Lipopolysaccharide-amine Nano-polymersomes/ Hyaluronic Acid Polyelectrolyte Films on Titanium Surface
Teng Wei, Huang Hongzhang
Department of Prosthodontics.GuanghuaSchoolof Stomatology,Hospital of Stomatology,Sun Yat-SenUniversity &GuangdongProvincialKey Laboratory of Stomatology,Guangzhou,China
Purpose: To evaluate the biological effects of lipopolysaccharide-amine nano-polymersomes/
hyaluronic acid polyelectrolyte membrane to bone marrow mesenchymal stem cells on titanium surface.
Methods: Cationic polyelectrolyte is lipopolysaccharide-amine nano-polymersomes. Anionic
polyelectrolyte is hyaluronic acid. Polyelectrolyte films were constructed by Layer by layer self-
assembly technique. The morphology of titanium surface was observed by scanning electron
microscopy before and after assembles. Physical and chemical characterization of polyelectrolyte films
measured by UV spectroscopy and contact angle measurements. The adhesion, proliferation,
differentiation and originally transfection capability of bone marrow mesenchymal stem cells on the
polyelectrolyte films were studied as well.
Results: The titanium surface becomes relatively smooth since the assembly process of films. DNA
absorption peaks appear at 260nm in UV spectrum. Absorption peak intensity increases as the films
assembling. The contact angle increases in jagged shape alternately, which further proofed films
assembly success. The surface of pNPs-(HA/pNPs)4 can enhance the adhesion, proliferation and
differentiation of MSCs, and the difference is statistically significant compared to Ti and alkali-heat
treated Ti groups. In situ transfection capability of the films also confirmed.
Conclusion: Construction of the polyelectrolyte films with lipopolysaccharide-amine nano-polymersomes and
hyaluronic acid was successfully assembled and has good biological effect for cells.
Key words: Titanium;Layer-by-Layer self-assemble; Polyelectrolyte multilayer films;
Lipopolysaccharide-amine nanopolymersomes; Bone morphogenetic proteins2
45
The Impact of Oral Rehabilitation on Head and Neck Cancer Patients by Liverpool Oral Rehabilitation Questionnaire (LORQv3) Along with Oral Health Impact Profile (OHIP-14)
KanchanDholam,GunjanChouksey
Tata Memorial Hospital
Purpose: Cancer therapy affects oral functions. Oral rehabilitation attempts to address such issues and
is specifically aimed at improving and enhancing the quality of life of patients. The purpose of this
study is to assess the impact of oral rehabilitation on head and neck cancer patients’ by using
(LORQv3) and (OHIP-14) questionnaire and to carryout and document specific patient-deprived
problem in relation to the issues of oral rehabilitation.
Methods: Sixty patients who are in need of oral rehabilitation will be recruited. General patient’s
information and treatment details will be recorded .Patients will be asked to rate their experience of
dental problems before fabrication of prosthesis (baseline) and at the 3 months and one year follow-up
visit after prosthetic rehabilitation by using LORQv3 along with OHIP-14. Descriptive and multivariate
analysis will be done. Subscale scores will be determined by mean value and p-value (P < 0.05) will be
considered statistically significant.
Results: LORQv3: Changes in the domains of oral functions, orofacial appearance and prosthesis
satisfaction etc will be noted. Similarly assessment of the various domains like functional limitation,
psychological disability, social disability and others of OHIP-14 will be done.
2014 Xi’an Conference
75
Conclusion: The impact of prosthetic intervention has contributed in improving oral rehabilitation.
Key words: Oral rehabilitation; Quality of life; Oral functions
46
Meticulous Reconstruction of Oral and Maxillofacial Soft Tissue Defects After Tumor Ablation—the Principle, Method, and Reconstructive Efficacy
Wu HanJiang
The Second Xiangya Hospital, Central South University
Purpose: To discuss the methods of meticulous reconstruction of oral and maxillofacial soft tissue
defects after tumor ablation, and to evaluate the reconstructive efficacy.
Methods: 1.The thorough resection of tumor and the preserve of important structures, the selection of
appropriate flaps, and the meticulous suture. Tongue reconstruction: The restoration of tongue
movements, the reconstruction of hyomandibular furrow, and the stitching order of tongue
reconstruction. Cheek reconstruction: To retain the vermilion as much as possible, and vermilion
reconstruction with vermilion flaps; to reconstruct the through-and-through cheek defects with
chimeric flaps; to increase the thickness of the cheek or/and to cover the titanium plate with fat flaps;
the flaps that provide the intraoral mucosal lining should be slightly larger than the defects and should
be sutured while the mouth is open, and mouth-opening exercises should be practiced postoperatively
to avoid or decrease limitations in mouth opening; the flaps that provide the extraoral skin lining should
be slightly smaller than the defects and should be sutured with some tension to improve the relaxation
of the lips after facial nerve resection. Soft palate reconstruction: The nasal side mucosa reconstruction
of the soft palate, the proper thickness of skin flap, and the preserve of the shape of uvula.2. Reshaping
the reconstructed structures. The linguistic and swallowing functions, especially the tongue; oral
balloon assisted training and elastic mask.
Results: The appearances and functions in all patients were satisfactory after the reconstruction, and all
the donor sites healed well without significant morbidity.
Conclusion: Meticulous reconstruction of oral and maxillofacial soft tissue defects after tumor ablation
can achieve satisfactory functional and aesthetic results.
Key words: Meticulous reconstruction; Oral and maxillofacial; Soft tissue defects
47
Unique Prosthetic Support for the Extended Oncologic Team Members
James A. Kelly
Mayo Clinic College of Medicine
In today modern age of oncologic treatment, it is vital that each patient receives customized prosthetics
undergoing radiation therapy or surgical resection. To improve the surgical outcome, and to decrease
the side effects of radiation, it is of utmost importance to have the maxillofacial prosthodontist working
together with our colleagues. The objectives of this lecture are to: 1) describe multiple fabrication
techniques for radiation devices, 2) discuss prosthetic devices to aid our surgical colleagues, and 3)
explain different prosthetic techniques to enhance our patients’ lifestyles. This presentation will
increase the awareness and implementations of Maxillofacial Prosthetic techniques for the oncologic
team.
2014 Xi’an Conference
76
48
Correction of Mandibular Deviation by Combination Therapy of Maxillary Ramp Prosthesis (MRP) and Mandibular Guide Flange Prosthesis (MGFP) in Mandibular Defect Case
Nafij Bin Jamayet, ZaihanAriffin, Adam Husein, Mohammad KhursheedAlam
School of Dental Science,UniversitiSains Malaysia
Purpose: Loss of the continuity of the mandible due to mandibulectomy destroys the balance and the
symmetry of mandibular function, leading to altered mandibular movements and deviation of the
residual fragment towards the surgical side. To solve this problem mandibular guidance therapy is
needed to minimize deviation of the mandible.
Methods: A 27 year old malay man was referred to maxillofacial prosthetic service, school of dental
science, UniversitiSains Malaysia, kotabharu, Malaysia for prosthetic rehabilitation following hemi-
mandibulectomy of left mandible due to ameloblastoma. The treatment plan involved correction of
mandibular deviation and restoration of edentulism associated with the defect area. A maxillary ramp
prosthesis (MRP) with mandibular guide flange prosthesis (MGFP) was made and given to patient for
muscle exercise and reprogramming to improve the mandibular deviation.
Results: Muscle reprogramming exercises with maxillary ramp prosthesis with mandibular guidance
flange therapy were performed for 2 months. On first follow-up after 2 months, the deviation of
mandible and the occlusal equilibration was improved after using both the prosthesis.
Conclusion: Mandibular guidance therapy with combination prosthesis can be a useful adjunct to
preserve the mandibular function after partial mandibulectomy procedures and to minimize
complications associated like mastication, speech and swallowing. An organized mandibular exercise is
suggested for eliminating mandibular deviation and uncoordinated muscle movements for successful
rehabilitation.
Key words: Mandibular guidance; Hemi-mandibulectomy; Mandibular deviation
49
Saving Faces Changing Lives
Bilal Ahmed
National University of Science & Technology (NUST), Islamabad. Pakistan
Purpose: 1. To highlight the importance of classical prosthodontic principles and materials in
maxillofacial rehabilitation.2. To justify significance of simple cost effective and time saving
techniques in scenarios where latest equipments and expertise are not available.3. to present immediate,
interim or definitive prosthodontic solutions with use of basic dental materials in short time span.
Methods: Case series presentation of maxillofacial defects treated with use of simple cost effective
prosthodontic techniques and conventional dental materials.
Results: Prosthodontic rehabilitation of either congenital or acquired maxillofacial defects is always a
challenging clinical scenario. these defects pose a major physiological and psychological threat not
only to the patient, but to the entire family. a multidisciplinary team approach, thorough investigation,
long term followup, proper counselling and a sympathetic attitude may help to bring the affected
humanity back to normal life stream.There has been an enormous scientific development in
maxillofacial rehabilitation with the advent of cad-cam, 3-d scanning, osseointegrated implants and
improved restorative materials. there are specialized centers with latest diagnostic and treatment
facilities in the developed countries. However, in certain clinical case scenarios, conventional
prosthodontic principles are still the gold standards. as in less developed world, financial and technical
constraints are factors affecting treatment planning and result outcomes. however, we can do a lot of
benefits to the affected human beings, even with use of simple and cost effective conventional
prosthodontic techniques and materials. these treatment strategies may sometimes be considered as
2014 Xi’an Conference
77
intermediate or temporary options, but with regular followup maintenance can be used on definitive
basis.
Conclusion: Treatment outcomes have been enormously improved with use of latest diagnostic and
procedural equipments like cad cam, 3-d scanning and implants but in lack of these facilities, acrylic
resins, silicones and denture making techniques have significantly improved halth related quality of life
and psychosocial well being of our patints.
Key words: Maxillofacial rehabilitation;Prosthodontics; Nasal prosthesis
50
Improvement of Swallowing and Articulation by Using Palatal Augmentation Prosthesis in a Semi-total Glossectomy Patient
YoshitomoMinagi, TakahiroOno, ShigehiroFujiwara, YoshitsuguTokuda, Kazuhiro Murakami, Masaaki Yamamoto, Yoshinobu Maeda
Osaka University Graduate School of Dentistry
Purpose: This case report presents the recovery process of articulation and swallowingfunction by
fabricating Palatal Augmentaion Prosthesis (PAP) and mandibular partial denture with extended saddle.
Methods: A 39 year-old male patient who underwent subtotal glossectomy, radial neck on the right
side, and reconstruction using forearm flap under the diagnosis of recurrent tongue carcinoma. Speech
intelligibility (assessed by 10 speech language pathologists), food test and a VAS(visual analog scale)
questionnaire for articulation, chewing, swallowing was evaluated before and after the fabrication of
PAP and mandibular partial denture with extended saddle.
Results: By the application of PAP and modified mandibular denture, speech intelligibility score was
improved from 3.3 to 2.2,and the amount of oral residue reduced. It was confirmed by the VAS
questionnaire that subjective assessment of swallowing and articulation was remarkably improved.
Conclusion: Those prostheses improved speech intelligibility and swallowing ability through securing
tongue-palate contact and optimizing oral cavity volume.
Key words: Tongue; Articulation; Swallowing; Glossectomy; Palatal augmentation prosthesis
51
The 3-stage Therapeutic Process of a Sequence Obturators for Maxillectomy: a Case Report
Li Yan, Wu Shuyi
Guanghua School of Stomatology, Hospital of Stomatology, Sun Yat-Sen University
Purpose: To discuss a detail clinical pathway about 3-stage therapeutic process of a sequence
obturators for maxillectomy through a typical clinical case
Methods: There are 3 prosthodontic therapeutic stages for maxillectomy: 1. Surgical obturator stage (2
week perioperative period of maxillectomy), discussing with surgeon, impression and manufacture a
surgical obturator before operation and place it intraoperative period. 2 .Interim obturator stage (from 1
week to 3 month postoperatively), 2 obturators need to be used, one is the modified surgical obturator
use soft liner material, another is the new interim obturator fabricated with artificial teeth.3. Definitive
obturator stage (3 month after operation), natural teeth with clasps or implant abutment with attachment
to be retentions of the obturator according to planning. Typical case report CB is male, age 63, who was
diagnosed with a right maxillary sinus carcinoma need a right maxillectomy. He had experienced fully
3-stage therapeutic process of obturator prostheses. The evaluation items include the appearance, seal,
2014 Xi’an Conference
78
phonation, retention and mastication functions.
Results: 1. At surgical obturator stage, a sufficient communication with the surgeon confirmed
postoperative defect range, skin graft requirement, schedule of operation & restoration, and so on. A
suitable surgical obturator provides a good phonation. 2. At interim obturator stage, soft liner modified
surgical obturator maintained phonation. A new interim obturator with artificial teeth provided a part of
chewing function. 3. In the definitive obturator stage, natural teeth and implant abutments were used to
be retention and support of the obturator. A good appearance, phonation, retention and available
mastication functions were be obtained.
Conclusion: Successful sequence prostheses of maxillectomy can provide available appearance,
phonation, retention and mastication functions if the 3-stage therapeutic process is assured to be used.
Key words: Maxillectomy; Obturator; Sequence therapeutic process; Prosthesis,
52
Three-dimensional Finite Element Analysis of Obturator Retained with Anterior Attachment in Maxilloectomy Patients
Chu Xiaoyang, Wang Yanyi
1 Department of Stomotology, Affiliated Hospital, Academy of Military Medical Sciences,Beijing 100071,China. 2 Department of Stomatology, Chinese PLA General Hospital
Purpose: To establish the FEA models of unilateral maxillary defect and obturator retained with
maxillary anterior attachment. Finish the FEA analysis through vertical and lateral loading.
Methods: Use Mimics10.01 software to read and reconstruct the image data obtained by scanning a
normal complete dentition volunteer to establish the 3-D solid model of unilateral maxillary defect and
obturator. Cut the left maxilla by the software in order to build unilateral maxillary defect model. Use
CATIA V5 software to establish 3-D model of SG mini slide-type attachment. Then, use ANSA
software modify and assemble it to initial obturator to form the FEA model of attachment retained
obturator. Cut the maxillary central incisor , lateral incisors, canine and first premolar of unilateral
maxillary defect model to meet the requirement of porcelain crown abutment preparation. Compare
stress value and distribution in FEA models of attachment retained obturator with different number of
associated porcelain crowns with FEA model of clasp retained traditional obturator after vertical and
lateral loading.
Results: The establishment of 3-D FEA model of unilateral maxillary defect, the model has good
biomechanical similarity to the real ones.The models with attachment retained obturator has
significantly reduced overall maximum stress, even stress distribution of abutments. Considering tissue
preservation, stress analysis of abutments and alveolar bone, the model with three abutments associated
porcelain crowns works best.
Conclusion: As the results of this study, obturators retained with anterior attachments have advantages
in even stress distribution of abutments, avoiding excessive stresses and improving retention and
stability of denture comparing with traditional obturators retained with clasps.
Key words: Maxillary defect; Finite element analysis; Obturator; Attachment
2014 Xi’an Conference
79
53
NAM Appliance Design Utilizing a New Geometric Format
Jeff Rodney (presented by Ting-Ling Chang)
Maxillofacial Prosthodontist,University of Michigan
Purpose: Nasoalveolar molding (NAM) has become a commonplace adjunctive technique in preparing
infants with cleft lip (with or without cleft palate) for surgical correction. Multiple approaches to
designing the NAM tray appliance have been described in the literature with the common intent to
approximate the cleft alveolar segments. The purpose of this study was to explore and develop a
systematic approach for NAM applying simple geometric principles.
Methods: Multiple casts of unilateral cleft cases at various stages in treatment were analyzed. A vast
array of anthropometric measurements and landmarks were identified and utilized in geometric form to
facilitate material application for improved NAM results.
Results: Multiple geometric shapes in relation to involved alveolar cleft segments were studied. The
anterior end points of the alveolar crest segments were used to outline a box-like shape that elucidated
where segment movement should be achieved to minimize cleft distance. An envisioned parabolic
shaped arch form with importance placed on midline positioning of the incisive papilla may also
facilitate improved NAM results.
Conclusion: NAM treatment normally involves a subjective approach to material application and
gauging of alveolar segment movement to diminish cleft space. This study intended to provide a
format upon which more exploration into NAM design and approach for successful outcomes can be
simplified, systematized and viewed as a technique-friendly treatment modality.
Key words: Cleft and palate; Nasoalveolar molding
54
The Clinical Experience of the Oral Prosthodontic Treatment in Cleft Lip and Palate Patients
Xing Guofang, Yu Dedong, Zhang Xiuyin
Department of Prosthodontics, Ninth People’ Hospital, Shanghai JiaoTong University School of Medicine, Shanghai Key Laboratory of Stomatology. Shanghai 200011, China
Purpose: To discuss the preliminary clinical experience of fixed bridge treatment, removable denture
treatment, double dentition treatment in cleft lip and palate patients.
Methods: In this paper, 100 patients of cleft lip and palate with conservative treatment were involved
in. The clinical indications, advantages and disadvantages of the three conservative treatment ways
were studied. From the aspects of chewing function, maxillofacial appearance, nose and mouth fistula,
pronunciation and mental status, the three conservative treatment methods were compared.
Results: The three conservative treatments in cleft lip and palate patients can restore chewing function,
maxillofacial appearance, nose and mouth fistula, and improve pronunciation and mental status to some
extent.
Conclusion: For the cleft lip and palate patients who don’thave a surgical treatment,the conservative
treatment is a simple, economical and practical restoration method.
2014 Xi’an Conference
80
55
Maxillofacial Rehabilitation – Challenges and Opportunities
Bhaskar Agarwal
Department of Prosthodontics, King George’s Medical University, Lucknow, UP, India
Purpose: Changing lifestyle, increasing economic power and changed perception of esthetics have
affected the maxillofacial rehabilitation as a profession for dental practitioners and as a treatment
modality for patients.
The present study was carried out as a biforked survey of patient expectations and dental practitioners
views regarding maxillofacial rehabilitation as a superspeciality practice domain.
Methods: A total of 100 patients visiting the prosthodontic rehabilitation clinics of both the facilities
and a total of 50 postgraduate students and faculty members were interviewed regarding their
perceptions regarding maxillofacial rehabilitation as a treatment modality and as a career option were
obtained using two different semi-structured schedules for patients and professionals respectively.
Results: Around 90% of patients were not clear about the kind of treatment provided by maxillofacial
rehabilitation. Most of the patients (89%) considered it to be a treatment option for prosthodontic
rehabilitation only. Only 67% patients were aware about the role of maxillofacial rehabilitation in
esthetic dentistry. Females were more aware about the esthetic aspect (74%) as compared to males
(60%). Most of the patients were concerned about the financial aspect (88%). With respect to dental
practitioners, only 20 out of 50 (40%) expressed willingness to opt for maxillofacial rehabilitation as a
career option. Among those willing to opt maxillofacial rehabilitation as a career option – challenging
work and patient satisfaction were the most important motivating areas while among those unwilling to
opt it as a career option paucity of cases and infrastructural facilities were reported to be the barriers in
their decision. Concern regarding financial remuneration was expressed as a big barrier by majority of
those who opted and who did not opt it as a career option.
Conclusion: Awareness regarding scope of maxillofacial rehabilitation among patients is limited,
financial aspect is the most important area of concern for both patients as well as dental professionals
in its emergence as a separate superspeciality practice domain.
Key words: Maxillofacial rehabilitation; Maxillofacial prosthesis; Esthetic dentistry
56
Multifunctional Nanoparticles Based on Molecular Recognition for Cancer Cell Targeting and Traceable Intracellular Drug Delivery
Li Guolin
Department of Oral and Maxillofacial Surgery, The First Affiliated Hospital of Harbin Medical University
Purpose: Nanoscopic therapeutic systems that incorporate therapeutic agents, molecular targeting, and
diagnostic imaging capabilities are designed and prepared as the new generation of multifunctional
nanomedicine to improve the therapeutic outcome of oral squamous cell carcinoma.
Methods: Firstly, the hydrophilic anticancer drug clofarabine was functionalized with hydrophobic
alkyl chains to form amphiphilic structure, which could further self-assemble into nanoparticles in
water. Then, through the molecular recognition of nucleobases, incorporating the targeting unit aptamer
AS1411 and fluorescent groups into the nanoparticles was realized by intermixing of different building
blocks. Finally, the in vitro antitumor experiments were evaluated by MTT assay, flow cytometer and
confocal.
Results: In vitro studies confirmed that multifunctional nanoparticles could target tumor cells
efficiently, trace the drug release and induced the apotosis of oral squamous cell. All the results
2014 Xi’an Conference
81
demonstrated that the reported multifunctional nanoparticles synergistically integrated with cancer
targeted drug delivery and controlled release and fluorescent imaging functions augur well for their
potential applications as theranostic systems.
Conclusion: These results suggest that multifunctional nanoparticles based on molecular recognition
can enhance chemotherapy in oral squamous cell carcinoma. Such strategy holds a great potential in the
treatment of oral cancer.
Key words: Chemotherapy; Multifunctional nanoparticles; Drug delivery; Molecular recognition
57
Effect of Radiotherapy and Chemotherapy on the Quality of Life in Nasopharyngeal Carcinoma Patients: A Pilot Study
Teoh KH, Sim C , Seetoh YL
National Dental Centre Singapore
Purpose: The aim of this study was to determine the impact of radiotherapy and chemotherapy on the
quality of life (QOL) in nasopharyngeal carcinoma (NPC) patients.
Method: Twenty-two nasopharyngeal carcinoma patients scheduled for intensity-modulated
radiotherapy, who met the inclusion criteria and gave informed consent were c recruited. All patients
were rendered dentally fit before undergoing radiotherapy. Study subjects were asked to fill up the
University of Washington QOL questionnaire (UW-QOL v4) with the assistance of a trained
interviewer at 3 time points: pre-radiotherapy and 2 weeks post-radiotherapy and more than1 year post-
radiotherapy. Occurrence and timing of chemotherapy was recorded.
Results: Nineteen males and 3 females with a mean age of 50.6 years (SD: 11) participated in the
study. One patient was diagnosed with Stage 1 disease, 5 with Stage II, 11 with Stage III, 5 with Stage
IV. Five patients had radiotherapy alone. Seventeen patients had both chemo and radiotherapy, of which
six had neo-adjuvant and concurrent, five had concurrent and six had concurrent and adjuvant
chemotherapy. Nineteen patients returned for the 2 weeks post-radiotherapy review and 12 patients
returned for the > 1 year post-radiotherapy review.
The changes in the composite QOL scores based on 3-way comparison of pre, post and >1-year review
were statistically significant. There was significant change comparing post versus pre-radiotherapy
(mean 61.2 versus 91.4; p < 0.0001). The mean composite score went up to 80 at > 1year post-
radiotherapy review (p = 0.001). Chemotherapy and its timing did not significantly affect the composite
QOL scores for pre, post and > 1year post-radiotherapy review. Taste, swallowing and pain were
domains of major concern for patients at 2 weeks post-radiotherapy. Upon recall after 1 year, domains
of major concern were saliva, pain and swallowing.
Conclusion: Radiotherapy significantly affects the QOL of NPC patients. No significant adverse effect
was seen with concurrent chemotherapy. The 3 most important factors affecting the QOL of these
patients one year after completion of radiotherapy were saliva, pain and swallowing.
Key words: Quality of life; Radiotherapy; Chemotherapy
58
The negative effects of postoperative radiation on the rehabilitation of maxillary defect patients
Ren Weihong,Ao Hongwei, Lin Qing , Hong Xiaobin
Capital medical university
Purpose: To observe the affection of postoperative radiation therapy on the treatment of trismus
2014 Xi’an Conference
82
recovery of esthetic of maxillectomy patients.
Methods:1.22 maxillary defects patients, 14 patients received postoperative radiotherapy,8 patients did
not, were trained to practice mouth opening exercises from one week to 4 week after their operation.
The maximum incisor distance (MID) was measured. 2.The face of 22 patient, 13 patient received
postoperative radiation therapy , 9 patients did not, with and without their obturators were scanned by
3D laser Scanner (BIMU 0908X). The 3D facial images were recorded, converted and exported as STL
models by geomagic studio software .Then 3D geometric models were established by the software. The
Maximum space distance (MSD) was measured and used as the parameter to evaluate the esthetic
restoration of patient face.
Results: 1.The result show that In both groups, the final MIDs were statistically higher than the initial
ones(P<0.05). However, significant difference was not achieved from the data (P=0.105>0.05) in this
study between Group Radiotherapy and Group Non-radiotherapy.2. The MSD without obturators in
NO-RT group was lower than that of RT group ,6.58mm versus 9.84mm.and it was still lower with
obturator than that of RT group, 2.82mm versus 4.73. these difference were statistically significant
P<0.05
Conclusion: 1. Patients can be suggested proper mouth opening exercises during the
radiotherapy.2 .Postoperative radiation therapy has negative affections on esthetic recovery of
Maxillary defect patient. Specious clinic cares should be taken for them
Key words: Postoperative radiation therapy; Maxillary defect trismus; Esthetic
2014 Xi’an Conference
83
POSTER PRESENTATIONS
Session I – Advanced Digital Technologies and Maxillofacial Rehabilitation 1
Rehabilitation of Prefabricated Hollow Obturator Prosthesis in Maxillary Sinus Carcinoma Operation:11 Cases Report
Yan Haixin, Zhu Haiting, Lu Li
Affiliated Hospital of Stomatology, China Medical University
Purpose: To fabricate the prefabricated hollow obturator prosthesis and evaluate their influences on
patients with one side of maxillary defect.
Methods: Eleven patients with one side of maxillary defect caused by maxillary sinus carcinoma
operation were collected in this study and received prefabricated hollow obturator prosthesis. Patient's
self-assessment of masticatory efficiency, satisfaction, pain etc. were analyzed.
Results: Patients who received prefabricated hollow obturator prosthesis were satisfied with the
improvement of appearance, could be normal chewing and swallowing without choking food. Not only
there were no obvious discomforts, but also they could adapt to the process quickly.
Conclusion: The prefabricated hollow obturator prosthesis could be considered as an effective
prosthesis for maxillectomy patients by reconstructing the form of oral cavity, improving the
masticatory efficiency and speech intelligibility. It was helpful to improve the quality of life of patients.
Key words: Maxillary sinus neoplasms; Maxillary defects; Prosthesis
2
Computerized Project for Reconstruction Surgery, Implantology and Prosthetic Rehabilitation in Mandibular Defect
Didier Maurice
UFR Odontologie Paris 7-Denis Diderot French
Purpose: The objective of the mandibular reconstruction after resection surgery is to restore the
aesthetics by an osseous support for the soft tissue but also and especially to restore the functions of
chewing and deglutition by stabilizing the native mandibular sector and the bone in the resection area.
Methods: The surgery of reconstruction by fibula has to lean and be guided by the prosthetic project,
the only guarantee for the good positioning of the implants and of osseous transplant. For that, it is
necessary to digitize simulated. The axis of implants is defined by the setting of teeth and the fragment
of fibula is modelled according to these axes under the prosthetic surgery, the guide is positioned on the
fibula, the implants are placed and then the fibula is cut. At the end of surgery, a fixed transitory
prosthesis must be screwed on the implants or a removable prosthesis is placed.
Results: This prosthesis is the prospective prosthetic project. After a few months of healing the
definitive fixed prosthesis is made using the common steps of the prosthesis supported by implants.
Conclusion: The prosthetic rehabilitation for a maxilla or mandibular defect during or after
reconstructive surgery must be the result of a prosthetic project because the bone framework is in
relation with the position and the axis of the teeth. It is essential to do a prospective setting of the teeth
2014 Xi’an Conference
84
and to include it in the CT-Scan study with the simulation of the resection bone. Then, the fibula
framework is determined with the software from the prosthetic project and the axis of the teeth.
Key words: Maxillofacial prosthetic rehabilitation and surgery; Implants; Fibula
3
The Clinical Application of Computer-aided Designing and Manufacturing of Defected Maxilla Cast
Dai Tong
Department of Prosthodontics,School and Hospital of Stomatology,Peking University
Purpose: To test a new cast-making method based on computer-aided designing and manufacturing for
defected maxilla.
Methods: Head CT data of 18 patients with defected maxilla were transmitted into the computer.
Three-dimensional digital image of the patient’s defected maxilla was then obtained with special
software processing based on Mimics 8.11 and Geomagic 7.0 and the plastic cast of the defected region
was manufactured by prototyping. The obturator was then made on this plastic cast which can duplicate
the undercut tissue of defected area. The prominent part of the obturator was made of elastic heat-
curing resin and it was helpful to gain the retention through the engagement between the obturator and
the tissue undercut. After the obturator was finished, the upper removable partial denture was made
traditionally. Then the combination of these two parts was achieved by magnetic attachment. The
clinical effects of obturator and removable partial denture were then evaluated and the nasalance values
of 5 patients before and after wearing the obturator were measured by nasometer.
Results: The obturator and removable partial denture can be seated into place separately. They all had
good retention and stability. After the obturator was seated in place, the nasalance of nonnasal
consonant text decreased significantly from 46.53±13.86% to 22.60±8.52% (P<0.001).
Conclusion: The cast-making method based on computer-aided manufacturing for cast-making of
defected maxilla is feasible and practical. It can solve problems faced with conventional impression
methods and get good clinical result.
Key words: Computer-aided designing and manufacturing; Defected maxilla; Obturator; Resin model
4
Effects of Three Types of Veneering Porcelain on Bending Strength of KAVO™ Y-TZP/porcelain Bilayered Structure
Gu Bin, Yang Yang, Lu Rongjian, Wen Ning
Department of the Prosthodontics, The General Hospital of Chinese PLA
Purpose: The purpose of this study was to investigate the effect of three types of veneering porcelain
on the bending strength of KAVO™ Y-TZP/porcelain layered structure.
Methods: KAVO™ zirconia ceramics were selected as substructure. To forming Y-TZP/porcelain
bilayered structure, a leucite based veneering porcelain was fired on the zirconia substructures by slip-
casting technique with dentin washbake, and two nano-fluorapatite based veneering porcelain was fired
on the zirconia substructures either by slip-casting or pressed-on technique with or without liner
coverage. Bending strength was tested according to ISO 6872 standard, and the veneered surfaces of
fracture samples were analyzed by SEM.
Results: For covering KAVO ™ zirconia core material, conventionally applied veneering slurry-
porcelain combined with liner or wash firing has significant higher bending strength than pressed-on
2014 Xi’an Conference
85
porcelain. SEM showed that the main failure type at the interface was adhesive.
Conclusion: Thin layer sintering as applying washbake program or liner on KAVO ™ zirconia surface
increased the surface wettability, this procedure may be indispensable when veneering on the surface of
dental zirconia.
Key words: Dental ceramics; Zirconia; Mechanical properties
5
Comparative Analysis of the Upper Airway Volume Using Lateral Cephalogram and Cone-beam Computed Tomography
Feng Xin, Li Gang, Qu Zhenyu, Liu Lin, Näsström Karin, Shi Xieqi
Department of Oral and Maxillofacial Radiology, Stomatological Hospital, Dalian
Purpose: This study aimed to evaluate the ANR (adenoidal nasopharyngeal ratio) on lateral
cephalograms on assessing the upper airway volume using CBCT images as validation method.
Methods: Thirty-two patients (mean age 11.8±1.6 years) were included in the study and it was
essential that the lateral cephalogram and CBCT images taken at the examination were not more than 1
week apart. ANR was measured on the lateral cephalograms. The area and volumetric measurement of
the nasopharynx (NP) and the total upper airway were obtained on CBCT images. Repeated
measurements of ANR and airway volume were performed on 10 cases by two observers.
Results: Correlation (r = -0.78) was demonstrated between the ANR and NP volume. The ANR
presented a weak correlation (r = -0.48) with the total upper airway volume. Both measurements
performed on lateral cephalograms and CBCT were highly reproducible in terms of intra- and inter-
observer agreement.
Conclusion: Based on our results, the measurement of ANR on lateral cephalograms may be used as a
screening method to estimate the NP volumes, throughout orthodontic treatment period when lateral
cephalogram is readily available.
Key words: Adenoid; Nasopharynx; Cone beam computed tomography
6
The Study of Computer-aided Design for a Facial Prosthesis Using Three-dimensional (3D) Registration Technology
Qiu Jing, Tang Chunbo, Li Ming
Jiangsu Key Laboratory of Oral Diseases, Nanjing Medical University; Department of Oral Implantology, Affiliated Hospital of Stomatology, Nanjing Medical University
Purpose: The aim of this study was to investigate the feasibility of computer-aided design for a facial
prosthesis using three-dimensional (3D) registration technology.
Methods: A patient with an extensive and complex maxillofacial defect was scheduled for a facial
prosthesis. A fast structured-light scanning of the face and a spiral CT scan of the head were performed
respectively. 3D reconstructions were correspondingly accomplished by Geomagic studio and Mimics
software. Using 3D registration technology, the structured-light surface was superimposed on the
reconstructed CT soft-tissue surface by corresponding landmarks and the iterative closest point (ICP)
algorithm. Then, a 3D virtual model of the maxillofacial defect with underlying skeletal structure was
created. Registration differences were calculated for validity estimates. Based on the acquired 3D
virtual model, computer-aided design for a facial prosthesis of the patient was carried out using
2014 Xi’an Conference
86
Geomagic software.
Results: A complete 3D virtual model of the maxillofacial defect with underlying skeletal structure
was generated using registration. The average registration difference was 0.5 mm. A facial prosthesis of
the patient was designed based on the 3D virtual model.
Conclusion: 3D registration technology can be utilized in the computer-aided design for a facial
prosthesis.
7
Magfit-attachment-linked Sectional Obsturator and Prosthesis for Maxillary Defects and Placket Restricted
Li Binghong, Yang Xiaodong, Ai Hongjun
Department of Prosthodontics, the Affiliated Stomatological Hospital, China Medical University, Shenyang, China
Purpose: To evaluate the clinical effect of rehabilitation with a magfit-attachment-linked sectional
obturator prosthesis for maxillary defect and placket restrained.
Methods: The magfit-attachment-linked sectional obturator prosthesis was applied to treat 6 patients
with maxillary defect and placket restrained. The integrative hollow obturator was for other 4 patients
with maxillary defect only. The masticatory efficiency and speech intelligibility were measured
respectively. The clinical effect of prosthesis was reflected individually.
Results: The sectional obsturator joining by dental magnetic attachment can make the suffers with
maxillary defects and placket restrained rehabilitate ahead .Wearing the obsturator changed easily and
stability and looked resumed a lot, got clear pronunciation, the masticatory efficiency and speech
intelligibility can improve .
Conclusion: To apply the magfit-attachment-linked sectional obturator prosthesis in maxillary defects
and placket restrained can achieve perfect effect.
8
Retrospective Clinical Study on the Application of Magnetic Attachment in Maxillofacial Prosthesis
Li Chuanjie, Li Yanan, Wei Zening
Department of Stomatology, Chinese PLA General Hospital
Purpose: Investigation on the magnetic attachment in maxillofacial prosthetic restoration in clinical
application. Discussion on how to increase the magnetic attachment stability and clinical use of
personalized.
Methods: A computer search was performed in PubMed using key words of “magnetic attachment,
maxillofacial prosthesis” in English, and in SinoMed network edition and CNKI database and
Wanfang database using keywords of “magnetic attachment, prosthesis” in Chinese.
Results: There are 93 literatures (after 1980) about the magnetic attachment of complex maxillofacial
prosthesis, including 78 Chinese literatures and 15 English literatures. Repeated and similar researches
were excluded. There are 46 standard literatures were summarized.
Conclusion: Magnetic attachment can effectively improve the retention and stability of maxillofacial
prostheses, patients feel more comfortable and satisfaction. According to the specific condition of
different patients, it is necessary to choose appropriate the magnetic attachment connection mode and
morphology which can make better retention and stability, easier to wear and take off, more clearly
2014 Xi’an Conference
87
pronunciation and restored much better masticatory function.
Key words: Magnetic attachment; Maxillofacial defect; Prosthesis
9
Acoustic Characteristics of Vowels in Trismus Simulated Condition
Mahmoud E. Elbashti, Mariko Hattori, Yuka I. Sumita, Hisashi Taniguchi
Maxillofacial Prosthetics Department, Tokyo Medical and Dental University
Purpose: In maxillofacial rehabilitation, speech evaluation is important and the acoustic evaluation of
vowels is often taken place in patients with maxillofacial resection. Those patients often suffer from
trismus as a result of tumor resection and/or radiotherapy. The degree of mouth opening affects the oral
function which include speech articulation. The aim of this study was to evaluate the acoustic
characteristics of vowels articulation in trismus simulated condition.
Methods: Digital acoustic analysis of five Japanese vowels, /a/, /i/, /u/, /e/ and /o/, was performed on
12 normal male subjects with and without mouth opening limitation. The trismus condition was
simulated by using mouth opening limitation device. A simple set of acoustic descriptions called the
first and second formant frequencies, formant 1(F1) and formant 2 (F2), were applied and calculated
utilizing an auto-correlation method of linear predictive coding. Wilcoxon signed-rank test was used for
the statistical analysis.
Results: Recording of uttered vowels in trismus condition was successfully achieved by mouth
opening limitation device. The F1 frequency values were significantly different between the normal and
trismus simulated conditions for /a/ and /e/ (P= 0.002). The F2 frequency values were also significantly
different between the normal and trismus simulated conditions for /a/ and /e/, (P= 0.003 and 0.012,
respectively). The F1 range was significantly different (P= 0.003) between the normal and the trismus
simulated conditions, while the F2 range did not differ significantly (P = 0.347) between the normal and
the trismus simulated conditions.
Conclusion: It was suggested that speech articulation is affected by trismus. When acoustic
characteristics of patients are discussed, prosthetic efficiency shouldn't be the only consideration,
trismus condition should also be taken into account.
Key words: Trismus; Digital acoustic analysis; Vowels; Simulation; Speech articulation; Maxillofacial
10
Application Value Comparision of Cone Bean CT and Spiral CT in Jaw Defect Three-dimensional Reconstruction
Li Zhimin
Department of Oral Radiology, Stomatological Hospital of Jilin University
Purpose: Compare the application value of cone bean CT and spiral CT in jaw defect three-
dimensional reconstruction.
Methods: Respectively, using CBCT and spiral CT to scan 10 hemi-maxillary defect patients’ and 3
Mandible defect patients’ craniofacial and conduct three-dimensional reconstruction with
accompanying software.
Results: CBCT emerges a much more accurate, legible and emulational image compared to spiral CT.
Conclusion: CBCT may get a broader clinical application for its efficiency and accuracy in
reconstructing jaw defects compared to spiral CT.
2014 Xi’an Conference
88
CBCT may get a broader clinical application for its efficiency and accuracy in reconstructing jaw
defects compared to spiral CT.
Key words: Cone bean CT; Jaw defect; Three-dimensional reconstruction
11
The Three-dimensional Finite Elements Analysis of Different Rate of Clinical Crown-Root and Width of Marginal Alveolar Bone of Maxillary Central Incisor
Liao Muying, Zhang Yi
Affiliated Stomatological Hospital, Guangxi Medical University
Purpose: To evaluate the date and distribution of stress in periodontal membrane of the three-
dimensional(3-D) finite element model of different rate of clinical crown-root and width of marginal
alveolar bone of maxillary central incisor.
Methods: Reconstruct a 3-D parametric model of maxillary central incisor by reverse engineering
software Geomagic, Mimics, and computer aid design program UG6.Then the 3-D parametric model
was imported to Ansys Workbench software. Apply a force about 120N on the edge1/3 of the tooth
45°tilted, set up 3-D finite element model and evaluate the date and distribution of stress in periodontal
membrane and alveolar bone of different rate of clinical crown-root and width of marginal alveolar
bone of maxillary central incisor.
Results: (1) When the width of marginal alveolar bone was 0.3mm, the rate of clinical crown-root was
changing, the region of the maximum stress was on the cervix of the periodontal membrane and
alveolar bone. When the rate of clinical crown-root was increasing, the area and date of the maximum
stresses were increasing. When the rate of clinical crown-root reach at 2.25, the Von Mises stress on the
peridental membrane was 26.8 MPa which is twice of the normal one. (2) When the rate of clinical
crown-root was 1.8, the width of marginal alveolar bone the was decreasing, the area and date of the
maximum stresses were increasing, but the rangeability is comparative smaller than former
Conclusion: (1) When the rate of clinic crown-root reach at 2.25, the Von Mises stresses on the
peridental membrane were more than the tolerance range of the normal one. The continued force was
liable to damage pericementum tissues. (2) When the width of marginal alveolar bone the was
decreasing, the rangeability is comparative smaller than former, so we should pay more attention to the
damage of the rate of clinical crown-root in clinics.
Key words: The rate of clinical crown-root; The width of marginal alveolar bone; Stress analysis
12
Application of Computer-Assisted Design and 3D-model in Mandibular Reconstruction by Free Fibular Flap
Sun Bin, An jiping, Zhang Wei
Department of Oral and Maxillofacial Surgery, Stomatological School of JiLin University
Purpose: The purpose of this clinical study was to evaluate the value of computer-assisted design and
three dimensional model in mandibular reconstruction by free fibular flap.
Methods: 13 mandibular reconstruction procedures using the technique of computer-assisted design
and individual 3D-modelby free fibular flaps were performed. The size of the flaps which were used for
reconstruction defects ranged between 7 cm and 15cm, and the standard international HCL
classification suggested by Jewer et al was used to categorise the defects of mandible. The digital three-
2014 Xi’an Conference
89
dimensional model of the maxillofacial skeleton and fibular were created using fine-cut(<1.5mm) axial
standard computed tomography (CT) date. A virtual mandibular reconstruction with a fibula bone was
performed using Mimics 8.1 software. The mandibular lesion was simulatively segmental resected,
then the fibular osteotomies were planned by visualizing the reconstruction superimposed on the
preoperative image of the mandible such that the outer contour of the mandible was restored. For cases
in which a portion of the mandible was already absent, comparison to the normal side and the opposing
maxillary dentition facilitated surgical planning. The individual model was then created by 3D-printer
using RPM technology, Titanium reconstruction plate was then bent preoperatively to match the
contour of the fibula and adjoining facial bones on the individual model. The fibular portion of the
mandibular model was cutting into several segments at the turning points, then the fibula cutting guide
was manufactured preoperatively to match the segments according to the lengths and angles. The
cutting guide was then sterilized for intraoperation use as a reference. During surgery, the sterilized
cutting guide was temporarily fixed to the harvested fibula bone, and a reciprocating saw blade was
used to make osteotomies at the lengths and angles required to replicate the virtual plan.
Results: All of fibula flap were alive and no complication occurred. The method above both reduce the
operation time and improve the precision of mandibular reconstruction. The patients were satisfied with
the results both esthetically and functionally.
Conclusion: Computer-assisted design and three dimensional models have potential to increase the
speed and accuracy of mandibular reconstruction.
Key words: CAD; 3D-model; Mandible reconstruction
13
Biomechanical Design and Fabrication of the Model of the Individual Mandibular Titanium Framework
Sun Jian, Jiao Ting, Zhang Fuqiang
Ninth People’s Hospital, School of Medicine, Shanghai Jiaotong University
Purpose: To evaluate the stress distribution in the individual mandibular titanium framework and
discuss the fabrication of the framework model by rapid prototyping.
Methods: A 3 Dimensional finite element model of the individual mandibular with holes in 4mm
diameters and 3mm interval both vertically and horizontally was developed according to the defect of
the mandible. The total modelling and solution processes were performed using the ANSYS. Then
through image conversion, the resin model of the framework was fabricated by rapid prototyping.
Results: The highest stress value was lower than the yield strength of titanium. Stress concentration
were at the areas between the holes. And stress concentration were also found between the denture
abutment and at the junction of the framework and mandible. And resin model of the individual
mandibular titanium framework designed was obtained.
Conclusion: The individual mandibular titanium framework designed in our study met the
biomechanical requirement, and the biomechanical design and fabrication of the model of the
mandibular titanium framework based on ANSYS and rapid prototyping was feasible.
Key words: Mandibular titanium framework; 3 dimensional finite element; Stress; Rapid prototyping
2014 Xi’an Conference
90
14
Clinical Application of Submental Island Flap on Repairing Oropharynx Defects after Cancer Ablation
Shang Wei
Department of Oral and Maxillofacial Surgery, the Affiliated Hospital of Medical College, Qingdao University
Purpose: To discuss the clinical effects of submental island flap on repairing oropharynx defects after
cancer ablation, and provide experience for clinical application.
Methods: 13 oropharyngeal cancer patients, whose defects were repaired with submental island flaps
in oropharynx regions after cancer ablation and radical neck dissection,were 12 patients with
squamous cell carcinoma and 1 patient with myoepithelial carcinoma case.
Results: Of the13 flaps, 12 submental island flaps were suivival,1flap had partial necrosis at the distal
edge, but healed after trim and dressing. The followed-up time was 3 months-3 years, and no one
showed tumor recurrence or metastasis. The patients all got good eating and speech functions.
Conclusion: Submental island flap is safe and effective for repairing small or middle sized oropharynx
defects after cancer ablation with being close to the oropharynx, located in the line of radical neck
dissection, simple operation, hidden incision and fewer lymph node metastasis in I area. Submental
island flap has excellent clinical application value.
Key words: Submental island flap; Oropharynx; Repair; Defect
15
Pre-surgical Nasal Molding for Infants with Unilateral Cleft Lip and Palate Using Multiple Digital Techniques
Zheng Yaqi, Liu Chen, Wu Guofeng
Department of Prosthodontics, School of Stomatology, the Fourth Military Medical University
Purpose: The unilateral cleft of lip and palate is characterized by severe nasal deformities, which need
the treatment of pre-surgical nasal molding. The aim of this study is to introduce a novel method
achieving a computer aided design and manufacturing (CAD/CAM) molding stent which was carried
out on two 5-day-old patients with unilateral lip and palate cleft.
Methods: In this case, by using the 3D facial data acquired by 3dMD, we established a method to
rebuild the virtual model by precisely covering the deformed side with a shape that is mirror-
symmetrical to the normal nasal ala. In addition, a 3D quantitative system for evaluating the outcome
of the correction was established as well.
Results: Finally, after accurate evaluation and design, the pre-surgical nasal molding stent was
fabricated by the 3D printing machine automatically.
Conclusion: This technique may be an alternative approach of pre-surgical nasal molding to obtain
normal nasal appearance before the cheiloplasty.
Key words: Cleft palate; CAD/CAM;Nasal deformity; Nasal molding stent
2014 Xi’an Conference
91
16
Acquisition of 3-dimensional Digital Models of Maxillary Defects Based on Multisource Data
Zhou Yongsheng, Ye Hongqiang, Hou Yuezhong, Ge Chunling
Department of Prosthodontics, School of Stomatology, Peking University
Purpose: Combined with spiral CT and intraoral scanning, to establish the precise 3-dimensional (3D)
digital models of the defected part and maxillary dentition in patients with maxillary defects, which
would make a basic and primary contribution to the digital design and manufacture of maxillary
prosthesis.
Methods: Patients with maxillary defects were scan by spiral CT. The scan range must include the
whole defected cavity and maxillary dentition. Then, the 3D images of the defected part and the
maxillary dentition were reconstructed from CT data via Mimics. The precise intraoral 3D images were
acquired by the intraoral scanner (e.g. 3Shape Trios), which contained maxillary dentition and soft
tissues. The 3D images from CT data and intraoral scanner were registered via Geomagic Studio. And
the defected cavity part from CT data and the maxillary dentition and soft tissues part from intraoral
scanner were combined together, generating the precise 3D images needed for the digital design of
maxillary prosthesis.
Results: The precise 3D digital models of maxillary defects were acquired via combining spiral CT and
intraoral scanning, which contained the complete structures needed for maxillary prosthesis.
Conclusion: The combination of different source data is a feasible way to build up the complex digital
models of maxillary defects.
Key words: Multisource data; Maxillary defects; 3-dimensional digital model
17
Inflatable Hollow Obturator Prostheses for Patients Undergoing an Extensive Maxillectomy
HouYuezhong, Huang Zhi, Ye Hongqiang, Zhou Yongsheng
Department of Prosthodontics, School and Hospital of Stomatology, Peking University
Purpose: Use inflatable hollow obturator to treat patients who has extensive palatal or maxillary
defects.
Methods: Patients with extensive palatal and maxillary defects were included in this study. These
patients underwent either total maxillectomy or radical partial maxillectomy that no tooth is maintained.
First, we made a hollow silicone obturator according to the cast of the patients. Then, install an air
valve into the obturator making it inflatable. Finally make an upper complete denture on the obturator
to restore function and appearance of the patients.
Results: The inflatable obturator prosthesis could be extended further into undercut area to retain itself.
It exhibited adequate retention, stability and border sealing, and improving the masticatory,
pronunciation and swallowing functions for the patients.
Conclusion: Silicone-based inflatable obturators offer a technique for the reconstruction of extensive
maxillary defects. It showed good clinical results for patients that are difficult to treat using
conventional methods.
Key words: Inflatable; Maxillectomy; Maxillofacial defects; Obturator; Silicone
2014 Xi’an Conference
92
18
Mandible Reconstruction Assisted by Preoperative Simulation and Transferring Templates: Cadaveric Study of Accuracy.
Zheng GS, Liang Yujie, Su YX, Liao GQ, Liu HC, Zhang SE, Liang LZ
Hospital of Stomatology, Guanghua School of Stomatology, Sun Yat-sen University
Purpose: In this study we tried to define tumor resection, fibula cutting, and positioning by surgical
templates to perform the mandible reconstruction surgery according to the preoperative simulation. The
accuracy was evaluated through cadaveric surgery.
Methods: Five cadaveric mandibles and fibulas were obtained. Preoperative surgical simulation was
performed. Surgical templates that defined tumor resection, fibula cutting, and positioning were
designed and fabricated. Translation, angular deviation, and rotation of bone grafts, as well as
translation of condyles, were measured.
Results: The reconstructed mandibles showed high similarity to the surgical planning. The mean
translation, angular deviation, and rotation of fibula segments of the reconstructed mandibles were 1.35
± 0.86 mm, 3.36° ± 1.86°, and 8.13° ± 5.35°, respectively. In the mandible remnants, the translation of
condyles was measured, with a mean of 1.39 ± 0.66 mm.
Conclusion: Our method of defining the tumor resection; Fibula cutting, and positioning by surgical
templates was accurate enough for mandible reconstruction surgery.
19
Mandible Reconstruction Assisted by Preoperative Virtual Surgical Simulation
Zheng GS, Su YX, Liao GQ, Liu HC, Zhang SE, Liang LZ
Hospital of Stomatology, Guanghua School of Stomatology, Sun Yat-sen University
Purpose: In this study, we evaluated the clinical efficacy of mandible reconstruction with preoperative
virtual planning, which focused on esthetics and occlusion.
Methods: A series of 9 patients were enrolled prospectively to undergo mandibulectomy and
simultaneous reconstruction. Preoperative spiral CT scans of the maxillofacial region and the fibula
region were performed. Virtual surgery of tumor resection and fibula reconstruction was performed in
the Mimics platform. The reconstructed mandible models were fabricated with CAD/CAM technique.
The reconstruction plate and the positioning template were accommodated to the stereolithographic
model as the surgical template.
Results: Surgery was performed accurately according to the templates. All the fibula flaps survived.
The appearance and occlusion of the patients were satisfactory.
Conclusion: With preoperative virtual planning, the spatial relationship of the mandible and the fibula
graft can be planned individually, which helps achieve optimum appearance and occlusion relationship.
Key words: Fibula; Mandible; Reconstruction; Defect
2014 Xi’an Conference
93
20
Mandibular Reconstruction Assisted by Preoperative Simulation and Accurate Transferring Templates: Preliminary Report of Clinical Application
Zheng GS, Su YX, Liao GQ, Liu HC, Zhang SE, Liang LZ
Hospital of Stomatology, Guanghua School of Stomatology, Sun Yat-sen University
Purpose: This study investigated the application of a computer-aided design and manufacturing
technique of defining tumor resection, fibula cutting, and positioning by surgical templates in
mandibular reconstructive surgery.
Methods: Four patients who required mandibulectomy and simultaneous reconstruction were enrolled
in this study. Preoperative surgical simulation was performed. The surgical templates that defined
tumor resection, fibula cutting, and positioning were designed and fabricated.
Results: The surgeries were performed to the preoperative plan. All flaps survived. Superimposition of
the postoperative image and the preoperative plan showed a satisfactory surgical accuracy.
Conclusion: This method of defining tumor resection, fibula cutting, and positioning by surgical
templates was accurate enough for mandibular reconstructive surgery.
21
Novel Method of Fabricating Individual Trays for Maxillectomy Patients by Computer-Aided Design and Rapid Prototyping.
Huang Zhi, Wang Xinzhi, Hou Yuezhong
Department of Prosthodontics, School and Hospital of Stomatology, Peking University
Purpose: Making impressions for maxillectomy patients is an essential but difficult task. This study
developed a novel method to fabricate individual trays by computer-aided design (CAD) and rapid
prototyping (RP) to simplify the process and enhance patient safety.
Methods: Five unilateral maxillectomy patients were recruited for this study. Based on the 3D surface
reconstruction of the target area, an individual tray was manufactured by CAD/RP. With a conventional
custom tray as control, two final impressions were made using the different types of tray for each
patient. The trays were sectioned, and in each section the thickness of the material was measured.
Statistics were used to examine the difference of the impression thickness. Afterwards, all casts were
then optically 3D scanned and compared digitally to evaluate the feasibility of this method.
Results: Impressions of all five maxillectomy patients were successfully made with individual trays
fabricated by CAD/RP and traditional trays. The descriptive statistics of impression thickness
measurement showed slightly more uneven results in the traditional trays, but no statistical significance
was shown. A 3D digital comparison showed acceptable discrepancies within 1 mm in the majority of
cast areas. The largest difference of 3 mm was observed in the buccal wall of the defective areas.
Moderate deviations of 1 to 2 mm were detected in the buccal and labial vestibular groove areas.
Conclusion: This study confirmed the feasibility of a novel method of fabricating individual trays by
CAD/RP. Impressions made by individual trays manufactured using CAD/RP had a uniform thickness,
with an acceptable level of accuracy compared to those made through conventional processes.
Key words: Clinical application; Feasibility; Impression technique; Maxillofacial prosthesis
2014 Xi’an Conference
94
22
The Significance of NHP to the Orbital Prosthesis Fabricated by Computer-aided Design and Computer-aided Manufacturing (CAD/CAM)
Xie Rui; Dong Yu; Bai Shizhu; Zhao Yimin
School of Stomatology, Fourth Military Medical University
Purpose: Orbital defects will not only affect the vision function,but also affect the facial expression.
The key and difficult points of orbital prosthesis fabricated are to restore the aesthetics. The register of
the normal head position (NHP) and three-dimensional surface images taken by 3dMD face scanner is
conclusive to the edge, location and precision of orbital prosthesis when using computer-aided
design .A simple method for obtaining NHP will also shorten the fabricating time of orbital prosthesis.
Methods: The patient's three-dimensional surface images taken by 3dMD face scanner register to the
patient's frontal facial photographs of NHP obtained by a simple, easy-to-use method. The registration
position of the three-dimensional surface images is in the NHP. Orbital prosthesis is designed and
fabricated by using this images on a computer.
Results: Comparison of the orbital prosthesis registered by NHP and by the designer`s experience, the
former is more convenient and have favorable edge. The orbital prosthesis morphology registered by
NHP is also more realistic.
Conclusion: Previously orbital prosthesis designed by computer is registered by observing and
measuring facial landmarks of patients. It depends on the experience of the designers. This method
based on Two-dimensional frontal facial photographs of NHP is more precise than that based on
designers` experience. And the frontal facial photographs of NHP is relatively simple and easy to
implement. It would be more useful and practical for the orbital prosthesis fabricated by computer-
aided design and computer-aided manufacturing.
23
Dose Study of LDCT Application to Reconstruct 3D Model of the Maxillofacial Hard and Soft Tissues
Gao Rui1, Bai Shizhu
2, Zhao Yimin
2
1. Department of Stomatology, the Affiliated Guangren Hospital of Xi’an Jiaotong University College of Medicine, Xi'an,710004, China
2. Department of Prosthodontics, School of Stomatology, the Fourth Military Medical University, Xi'an, 710032, China
Purpose: Evaluation of the feasibility of using low-dose CT (LDCT) to reconstruct three-
dimensional(3D) model of the maxillofacial hard and soft tissues,to provide research evidence for
using LDCT in computer aided prosthetic rehabilitation.
Methods: Lightspeed 16-slice spiral CT scanner was used to scan one adult cadaveric head specimens
with conventional parameters (280mA) and low dose parameters(200 mA、150 mA、100mA、50mA、35mA、25mA、15mA、5mA); the 3D model of the hard and soft tissues were reconstructed
with Mimics 10.01 software, and 3D comparison were carried on with Geomagic 11.0 software; A
comparison of the surface morphology of the hard and soft tissues of the 3D model with different
scanning parameters was made.
Results: With the reduction of the tube current, the models' surface became rough gradually. Compared
to the 280mA scan results, the models' surface of 35mA was still fairing. But when fell to less than
25mA, the models' surface become so rough to distinguish its exact shape. It came to the same results
of the test results of models' surface after registration.
Conclusion: The low-dose (35mA) CT can be used to reconstruct 3D model of the maxillofacial hard
2014 Xi’an Conference
95
and soft tissues.
Key words: CT; Low-dose; Three-dimensional model
24
3D Printing Technology and Its Application in Oral and Maxillofacial Treatment
Zhang Leiqing1,2
, Yuan Xigen2, Dong Yan
1, Liu Yunfeng
2, Peng Wei
2
1. Department of Prosthetic Dentistry, College of Medicine, Second Affiliated Hospital, Zhejiang University, Hangzhou 310009, China
2. College of Advanced Manufacture, Zhejiang Industry University
Purpose and methods: With the continuous development and progress of science and
technology, production technology also achieves continuous improvement and updating. Presently, an
advanced technology called 3D printing technology, can divided the reconstructed 3D digital model
into layers, then piled layers up one by one into a physical model. In order to understand the
development of 3D printing, as well as its advantages, and focuses on its application in oral and
maxillofacial treatment, the authors spent eight months, refer to database of PubMed, Web of Science,
Elsevier ScienceDirect, WanFang data, VIP journals, and CNKI, read 52 references. Eventually have a
deep understanding about 3D printing technology, and also have a deep understanding about its
application in oral and maxillofacial field.
Results: 3D printing first applied in the industrial engineering field, then be promoted in the field of
clinical medicine, now it is widely used in orthopedics, cardiothoracic surgery, preoperative diagnosis
of oral and maxillofacial surgery, surgical planning and simulation at various stages of various
departments; The application of 3D printing technology in treatment of oral and maxillofacial field,
broke through many disadvantages of traditional production process, brought the gospel to patients
with oral and maxillofacial diseases; The main advantages of 3D printing technology is it can greatly
save the cost, because it avoids waste problems which appeared in the traditional craft when molding
products, in addition, it can also make full use of computer data to print products accurately, so it
improve the precision of the products, truly achieve personalized production services.
Conclusion: Nowadays, 3D printing technology is the most popular production technology. It can
bring great social change. People call it “The third industrial revolution”. In this paper, we main refer to
the 3D printing technology advantages when used in oral and maxillofacial treatment.
25
Computed Tomography Measurement of the Auricle in Han
Population of North China
Wang Bo, Dong Yan, Bai Shizhu, Wu Guofeng, Zhao Yimin
Department of General Dentistry & Emergency, School of Stomatology, Fourth Military Medical University, Xi’an 710032 ShaanXi, China
Purpose: The current study sought to provide anthropometric data on normal auricles in a Han-Chinese sample using a 3D CT reconstruction technique.
Methods: We studied the CT data of 485 adult Han-Chinese people (244 males and 241 females).
To examine the relationship between auricle dimensions and age, the data were divided into three
age subgroups. All measuring points were determined using 3D reconstructed images. Sixteen anthropometric ‘landmarks’ on the auricles were used to record twelve dimensional measurements.
2014 Xi’an Conference
96
Results: The results revealed that auricular shape was largely identical bilaterally. Almost none of
the anthropometric data for the bilateral position of auricles showed significant differences
between sides, with the exception of auricular length and width, length and height of the tragus,
and the conchal length. The results revealed that all linear dimensions of auricles, except for
height of tragus and conchal length and width, increased significantly with age for both males and
females. The auricular and lobular indices exhibited a tendency to decrease as age increased, for
both males and females.
Conclusion: The auricle is an important defining feature of the human face. Its shape conveys
information about age and sex that is striking yet difficult to characterise. Aesthetic plastic
surgeons typically aim to achieve symmetry between the left and right auricles, but few data on
auricle dimensions are currently available. This study exhibits the different morphometric
measurements from normal auricles in 485 Han-Chinese using a 3D CT reconstruction technique.
The results obtained in our study produced many effective parameters for auricle morphology,
especially the relationship between auricle morphology and advancing age. We believe that the
data presented in this study have many advantages over data obtained by traditional direct
measurement techniques. These findings have potential implications for the diagnosis of
congenital malformations, syndromes, and acquired deformities, in the planning of cosmetic
surgery, and for the hearing instruments industry.
Key words: Computed tomography; Anthropometry; Han Chinese; Normal auricle
26
A Pilot Study on the Orientation of 3-dimensional Facial Images to Natural Head Position (NHP)
Dong Yu 1
, Bai Shizhu 2
1. Xi'an No.2 Hospital, Xi’an, Shaanxi Province 710032, PR China
2. State Key Laboratory of Military Stomatology, Department of Prosthodontics, School of Stomatology, Fourth Military Medical University, Xi’an, Shaanxi Province 710032, PR China
Purpose: With the development of computer-aided design and computer-aided manufacturing
(CAD/CAM), the technology has been applied into maxillofacial prosthetics. During the production of
prosthesis with CAD/CAM, it is essential to determine an appropriate facial reference to achieve a
natural and harmonious prosthesis. Previous studies showed that natural head position reflects true
appearance of an individual in real life,and is considered as an optimal reference for facial evaluation.
In most of studies on recording and adjusting NHP, investigators used additional head devices to help
achieving NHP, which, to some extent, might compromise the process the other way around. Herein,
the present study reported a simple, easy-to-use approach to achieving NHP without attached facial
devices.
Methods: We used full-face photographs of a head of a relaxed subject who stood and focused on an
infinite horizon to aid calibrating 3-dimensional surface images taken by 3dMD face scanner. (1) A
self-designed cartridge was made of acrylic, 250mm in height, 200mm in width and 300mm in length,
and fixed on a tripod. A one-way mirror was set as its frontal wall. Based on the cartridge, a
photographing system was established to aid the achievement of NHP in frontal view. (2) The frontal
facial photographs of 42 volunteers were obtained using the systems at baseline, 1h, 1d, 3d and 7d,
respectively. The angles between the lines connecting two outer canthus and horizontal line at each
time point were measured and compared using one-way ANOVA and Bonferroni’s multiple tests. (3)
We established a method to correct 3-dimensional surface images according to the full-face
photographs of NHP. Specifically, we calculated the 3-dimensional coordinates of four marked points
on the surface of facial images using Geomagic Studio software, and then used the points to correct 3-
dimensional facial images to NHP. Using the method, we compared angle difference of the corrected 3-
dimensional facial images between baseline vs. 1h, 1d, 3d, or 7d respectively.
2014 Xi’an Conference
97
Results: 1. We have established a method to obtain full-face photographs. So we could easily record
the NHP of a subject in frontal view after a few simple steps such as correction by a plumb line.2. We
have evaluated the full-face photographs of 42 volunteers at different time points obtained by the above
imaging system, resulting in that no statistically significant angle difference was observed between
groups at different time points. It was indicated that our imaging system is reproducible.3. We have
established a novel method to correct 3-dimensional images of random head orientation to NHP using
2-dimensional photographs of NHP in frontal view. Our study showed that the angle difference was
significantly increased at longer time points. The increment peaked at 3d but slowed down at longer
time point (7d), which was similar to the results from other studies.
Conclusion: We have established an easy-to-use approach to achieving NHP. Our method might be a
feasible tool to study the reproducibility of 3-dimensional NHP imaging.
Key words: Prosthesis; Computer aided design & computer aided manufacturing (CAD/CAM); 2-
dimensional full-face photographs; Natural head position; 3-dimensional surface images
Session II – Implants and Maxillofacial Rehabilitation
1
The UCSF Experience with Zygomatic Implants for Maxillary Defects
Arun Sharma
University of California, San Francisco, USA
Obturation of congenital and acquired maxillary defects in edentulous patients poses significant
challenges for prosthodontists. Osseointegrated implants provide an alternative to surgical
reconstruction. However, not all patients have adequate native bone for the placement of conventional
implants. The zygomatic implant was introduced by P-I Branemark in 1988 and has been used with
success for the appropriate patient. In 1999 an edentulous patient with an anterior maxillary defect
presented to the maxillofacial prosthetic clinic at UCSF unsatisfied with the functional outcome from
her conventional obturator. She had insufficient bone for placement of conventional implants and was
not a candidate for extensive reconstructive surgery. She was offered the zygomatic implant as an
alternative and was successfully treated. We proceeded to treat other patients with similar defects and
published our initial findings from 9 patients in 2004. This presentation will highlight updates on our
success and failures with the zygomatic implant for edentulous patients with congenital and acquired
maxillary defects.
Learning Objectives:
The participants will be able to:1. ntify patients with maxillary defects who will benefit from treatment
with zygoma implants as an alternative.2. l appreciate complications and maintenance for patients with
maxillary defects who have been treated with zygoma implants.3. cess and failures will be discussed.
2
Facial Defects: Alteration at Surgery to Enhance the Prosthetic Prognosis
Gassino G, Bellia E
Prosthodontic Section, Department of Surgical Science, CIR Dental School, Turin, Italy
Purpose: Aim of the study is to discuss about the variety of circumstances that may dictate prosthetic
2014 Xi’an Conference
98
restoration of rhinectomy-orbital defects.
Methods: Surgical reconstruction of small facial defects is possible and in most cases is preferable, but
if recurrence of tumor is likely, prosthetic restoration gives the advantage to monitor the surgical site
closely. Surgical restoration of large defects is technically difficult and requires multiple procedures
and hospitalizations. Patients confronted with this type of defect are usually older and less able or
willing to tolerate the multiple procedures required for surgical reconstruction. Increasing numbers of
this type of tumors are being treated with radiation therapy, whose collateral effects increase the risk of
complications associated with reconstruction.
Results: The experience gained in the surgical treatment of defects resulting from resection of tumors
of the nose, eyes and ears has brought improvements in prosthetic prognosis. Careful study of the
anatomical site to be treated, the treatment of bone and soft tissue margins and the use of implants have
led to these results.
Conclusion: Functional results of a well-made prosthesis allows the surgeon and the patient to monitor
the wound over time, but to ensure a good aesthetic result it is necessary to improve as much as
possible the prognosis, facilitating prosthetic rehabilitation and the social life of the patient.
Key words: Surgical reconstruction; Prosthesis; Tumor control
3
Rehabilitation of Patients with Reconstructed Mandible Using Implant-supported Prostheses
Lee Bora, Jung Hyunjung, Cha Inho, Han Donghoo
Department of Prosthodontics, Yonsei University Dental Hospital
Purpose: Patients with reconstructed mandible after mandibulectomy due to oral tumor are difficult to
recover functionally and esthetically using conventional prostheses. In this case report, oral functional
and esthetic rehabilitation of the oral tumor patients undergone mandibulectomy and mandible
reconstruction using fixed and removable implant prosthodontic treatment were introduced.
Methods: In order for a lower denture to have appropriate support, stability, and retention,
neuromuscular balance of tongue, lip, and cheek is important, denture bearing surface should be
sufficient, and denture flange should be extended sufficiently into lingual sulcus. However, Patients
with reconstructed mandible after mandibulectomy due to oral tumor have various degrees of anatomic
structural change, limitation of jaw and tongue movement, reduced motor and sensory ability
depending on tumor size, operated structure, and reconstruction methods.
Implant increases support of prostheses and resistance against lateral displacement. Establishment of
implant prosthodontic treatment plan should be preceded by evaluation of the amount and quality of
reconstructed hard and soft tissue. Bone should have sufficient width and height to ensure placement of
fixture appropriate for support of a prosthesis. Reconstructed patients often have thick or movable soft
tissue. If soft tissue in location of placement is too thick, there is potential risk of deepening peri-
implant pockets, which increases possibility of infection in bone leading to failure of implants.
Type and design of prostheses also should be determined. Removable prostheses include denture flange
supporting lower lips, and they not only reinforce missing teeth and alveolar bone area but also
improve facial profile.
In this case report, two cases in which patients recovered oral function and esthetics with fixed and
removable implant prostheses.
Results: In the cases which were difficult to recover function and esthetics using conventional
removable prostheses, implant supported prostheses were used for rehabilitation. Regular clinical and
radiographic examinations of prostheses and implants were done for these patients. They have been
maintained stable for about 10 and 4 years respectively.
Conclusion: In the patients with reconstructed mandible after mandibulectomy due to oral tumor,
2014 Xi’an Conference
99
implant placement in proper location and establishment of prosthodontic treatment according to clinical
conditions can recover oral function and esthetics.
4
Application of Implant-supported Overdenture with Locator Attachment in an Edentulous Patient after Hemimaxillectomy: a Case Report
Chen Cheng, Ren Weihong
Capital Medical University
Purpose: Edentulous patients after hemimaxillectomy always have difficulties in retention and stability
when applicated with conventional complete denture, due to the lost of teeth, the reduction of
supporting alveolar and neuromuscular disorder. Thus, implant-supported overdentures with Locator
attachment are recommended. We report the case of application of implant-supported overdenture with
Locator attachment in an edentulous patient after hemimaxillectomy.
Methods: A 61-year-old edentulous man who had been treated with left hemimaxillectomy was
submitted to implant-support overdenture with Locator attachment rehabilitation therapy which aimed
to restore orofacial form, function and general well being. The definitive maxillary obturator prosthesis
was fabricated. Before the procedure of implant surgery, it was turned into implant drilling guide. With
the help of implant drilling guide and CT, three implants were placed in his right residual alveolar ridge.
After 3 months, three locator implant abutments were placed and the overdenture was made.
Results: This kind of prosthodontics provided the edentulous patient after hemimaxillectomy with
greater satisfaction by giving a comfortable and stable prosthesis that provides better function.
Conclusion: This article has described a simple, clinical time saving and more retentive implant-
supported overdenture with locator attachment treatment plan for edentulous patient after
hemimaxillectomy. The use of three implants with Locator attachments can adequately support an
overdenture in cases of edentulous maxillary defect.
Key words: Implant; Locator attachment; Overdenture; Edentulous; Maxillary defect
5
Wang Chen, Guang Hanbin, Sun Yazhou, Hu Jian
Stomatology School of Nanjing Medical University
Purpose: The aim of this study is to evaluate the effect of silicone lining obturator used in early
maxillary prostheses.
Methods: Twelve patients with single maxillary defect were randomly divided into two groups. The
patients in group A were restored with hard obturator three months after maxillectomy. The patients in
group B were treated with silicone lining obturator two weeks after surgery. The retention, oronasal
seal (OS) and speech intelligibility (SI) were compared.
Results: The silicone lining obturator had better retention, OS and SI.
Conclusion: The silicone lining obturator is effective in the early functional impairments with single
maxillary defects.
Key words: Maxillary defect; Silicone lining; Obturator
2014 Xi’an Conference
100
6
The Effect of Different Root Canal Internal Surface Treatment on Bond Strength of Quartz Fiber Post
Yan Fei
Xiang Ya Stomatological Hospital, Central South University
Purpose: To investigate the effect of different pretreatments to root canal dentin on micro push-out
strength of quartz fiber post to dentin after post space preparation, and to evaluate the bond strength of
different regions of the root. So that appropriate pretreatments to root canal dentin can be used for
clinical selection and providing a theoretical basis for improvement bond strength of resin cement to
root canal dentin.
Methods: Twenty-four bicuspid teeth with single root were collected after extraction and saved in
negative twenty degree Celsius physiological saline. One week after endodontic treatment, the post
space preparation of all teeth were made, the teeth were assigned into four groups randomly with 8
teeth each. The teeth of four groups were irrigated with distilled water, EDTA gel, 1%NaClO and
EDTA gel+1%NaClO for 60s respectively. 2 teeth were obtained from each group and splitted into two
pieces. Observed the middle sections’ microscopic characteristic of the root canal dentin surface with
SEM. Panavia F self-etching resin bonding cement was imported into other teeth’s post space
according to the instructions. After cementation, the roots were subjected to simulated aging conditions
as thermal cycles. The roots were sectioned into slices with 1mm thickness and a micro push-out test
was performed on three different sections of each root to measure bond strengths. Test piece following
testing was placed under optical microscope to observe the breakage method.
Results: 1.Both EDTA gel and 1%NaClO notably improved the micro push-out strength (P<0.05). But
no significant difference in bond strength was determined between EDTA gel and 1%NaClO groups
(P>0.05);2. No significant difference in bond strength was determined between EDTA gel+1%NaClO
groups and the control group (P>0.05);3. The coronal third of the root resulted in statistically greater
bond strengths than the medium third, whose bond strength was significantly greater than the apical
third (P<0.05).
Conclusion: 1.EDTA gel and 1%NaClO irrigation to post space before bonding could enhance the
bonding strength between resin cement and dentin;2. 1%NaClO followed by EDTA gel irrigation to
post space before bonding could not enhance the bonding strength between resin cement and dentin;3.
Bonding was more predictable at the coronal level of the root.
Key words: Quartz fiber post; Canal surface treatment; Micro push-out test; Bond strength; SEM
7
Post Rhinectomy Rehabilitation by Means of an Epithesis
Bassi F, Bellia E
Prosthodontic Section, Department of Surgical Science, CIR Dental School, Turin, Italy
Purpose: Surgery for cancer leads often to extended tissues losses with major functional and
aesthetical limitations. In nasal defects in particular, prosthetic rehabilitation is indicated. This paper
aims to present a case report of a traditional rehabilitation with epithesis after total rhinectomy.
Methods: The patient is visited by the dentist 15 days after the cancer surgery for a first impression,
taken with a polysulfide or alginate after having blocked out undercuts with gauzes and vaseline. The
impression is poured, obtaining a stone cast on which the waxing of the nose is realized. A pre-surgical
impression of the physiological shape of the nose is very useful to obtain a more satisfying result and a
study of previous pictures of the patients can be also useful to capture shape, dimensions and colour of
the part to be realized.
Results: The wax up is tried-in with the patient, paying attention to the adaptation to the soft tissues.
2014 Xi’an Conference
101
The final epithesis is realized in silicon and can be retained in the right position with just the help of
adhesives or, when it is possible, with osteointegrated implants placed in the residual bone around the
defect.
Conclusion: The success of the rehabilitation depends on a meticulous study and planning of the
rehabilitation, a good interdisciplinary collaboration with oncologists and surgeons, but also a good
communication between patient and operator.
Key words: Rhinectomy; Epithesis
8
Immediate Implant-retained Prosthesis Following Radical Maxillectomy
Liao Guiqing
Hospital of Stomatology, Guanghua School of Stomatology, Sun Yat-sen University
Purpose: The maxillary defect after tumor resection typically involves the mucosal defect and the
midface osseous framework damaged. Reconstruction of this defect remains a considerable challenge
because the 3-dimentional architecture of midface serves both function and aesthetic role. This article
describes the maxillofacial rehabilitation of a patient diagnosed with recurrence ameloblastoma.
Methods: The surgery consisted of a large amount of maxillary bone and soft tissue resection. During
the surgical healing, zygoma and nasal implants were inserted in a two-step procedure. The immediate
maxillary prostheses were installed and fixed by a titanium framework. With the bone and soft tissue
remodeling, the immediate maxillary prostheses were replaced by a new one at post-operation 3
months. 6 months after operation, the second stage of implant procedures were carried out. The
ultimately maxillary prostheses were fixed by the titanium framework.
Results: After 2 years follow-up, no recurrences were observed. The patient have a good result in
aesthetic, functional, stability, and did not complaint any discomfort. Tissues around implants were in
good health, and the prostheses remained well-fitted. The patient was extremely satisfied with the final
result.
Conclusion: The immediate implant-retained prostheses are well accepted by the patient, improving
comfort and safety during function while recovering her esthetic appearance.
Key words: Immediate; Implant-retained; Prostheses; Maxillary defect
9
Microporous Pattern Fabricated by Microelectromechanical Systems Improved Fibroblast Functionalities on Titanium Surface
Wei Hongbo, Bai Shizhu, Zhao Yimin
Department of Oral Implant, School of Stomatology, the Fourth Military Medical University
Purpose: The fibroblasts, which play an important role in the biologic seal formation and maintaining,
determine the long-term success of percutaneous implants. This study aims to evaluate the effect of
precisely designed microporous structures manufactured by MEMS on fibroblast functionalities for
possible application in the implant percutaneous part.
Methods: Here in well-defined microporous structures with micropore diameters of 10-60 µm were
fabricated by microelectromechanical systems and their influence on the fibroblast functionalities was
observed. A modified Bosch process was used to manufacture the precisely designed microporous
structure by MEMS. Fibroblast functionalities such as cell adhesion, cell proliferation, fluorescent
2014 Xi’an Conference
102
staining of cytoskeletal actin, fibronectin secretion were assayed.
Results: 1. The six microporous structures with highly ordered and vertically aligned micropores of
different diameters of 10 µm, 20 µm, 30 µm, 40 µm, 50 µm, and 60 µm were fabricated by MEMS.
The micropores on all the substrates were about 10 µm deep. The titanium film was deposited
uniformly on the substrates.2. There was no statistical significance for the adherent fibroblast numbers
among the six microporous structures after 4 hours of culture.3. The microporous structures with
micropore diameters of 40 and 50 µm induced significantly better cell proliferation than the other
structures.4. From hour 4 to day 5, the microporous structures with micropore diameters of 10-60 µm
influenced the fibroblast functionalities and those of 40 and 50 µm improved the viability, spread, actin
stress fiber organization5. At days 7 the fibronectin amounts were much higher on the microporous
structures with micropore diameters of 40 and 50 µm
Conclusion: Well-defined microporous structures with micropore diameters of 10-60 µm can be
fabricated by microelectromechanical systems, which provide a good platform to study the interaction
of fibroblasts with biomaterial topography. The microporous structures with different micropore
diameters of 10-60 µm do not induce obvious influence in the initial adherent fibroblast number;
however those of 40 and 50 µm significantly improve the fibroblast functionalities including spread,
actin stress fiber organization, proliferation and ECM secretion. The microporous structures with
micropore diameters of 40-50 µm show great potential for the implant percutaneous part application.
Key words: Fibroblasts; Microelectromechanical systems; Percutaneous implant; Microporous
structure; Surface modification
10
Changes in Serum of Bone Regeneration of Antibacterial Nanocomposite Membrane in vivo
Cui Huang,ongbing Liao; Anchun Mo; Lichong Lan; Muying Liao Stomatological Hospital of Guangxi Medical University
Purpose: The objective of our study is to observe the changes in serum of rats so as to evaluate the
effect of four kinds of guided bone regeneration (GBR) membranes used in the skull defects of rats.
Methods: 45 adult male SD rats were randomly divided into five groups, 9 rats in each group. Then
two 5mm trephined defects were produced in the skull of each rat. In the four experimental groups, one
defect was covered by four different kinds of GBR membranes with the other side as blank control. The
fifth group was used as control group while the defects filled with autogenous blood only. After 1, 4, 8
weeks, the blood samples of rats were taken. The serum were separated and tested, the results showed
us the different changes in the alkaline phosphatase (ALP) and calcium concentrations.
Results: Except the blank group ,the rat serum alkaline phosphatase reached the highest values in
approximately 4 and 8 weeks, the group whose defects covered by the Ag-nHA-nTiO2/PA66
membrane was the highest, while the blank group showed the opposite trend. As the concentration of
calcium ions, the value of experimental group reached the highest point in 4 weeks and decreased
slightly in 8 weeks. There was a little increase of calcium ion concentration in the blank group.
Conclusion: The results indicated that four kinds of GBR membranes had excellent biocompatibility in
8 weeks in vivo. The Ag-nHA-nTiO2/PA66 membrane has a positive effect on newly formed bone.
Key words: Guided bone regeneration (GBR); Polyamide; Nano-hydroxyapatite; Alkaline phosphatase
(ALP)
2014 Xi’an Conference
103
11
Osseointegrated Implants Supported Bar and O-ring Combination Prosthesis post Mandibular Resection
Sharad Gupta
MDS, FICD, FICOI, FAAMP
Purpose: Rehabilitation of hemimandibulectomy post cancer resection is a challenge. The immediate
concern is trismus which is surmounted upon by the rotation and mandibular deviation to the resected
side. The prosthetic rehabilitation is further complicated if the patient is completely edntulous. The
purpose of the case report was to utilize the remaining alveolar bone following partial mandibular
resection by osseointegrated implant supported prosthesis so as to enhance patient’s quality of life.
Methods: Three endosseous implants were placed in the remaining alveolus involving anterior and left
mandible following partial mandibulectomy and radiation therapy 8 years back. The implants were
placed in a manner so as to fabricate a cast milled bar anteriorly and o-ring attachment was placed
posteriorly so as to act as a vertical support. The configuration permitted PM0 movement and led to
increased retention support and patient acceptance. The maxillary denture was fabricated with palatal
guidance ramp so as to control deviation and guide the patient in occlusion.
Results: Utilization of osseointegrated implants in the rehabilitation of mandibular resection led to
greater patient comfort and acceptance. The prosthesis was unique as it incorporated the bar over
anterior implant along with o -ring attachment over the posterior implant. The unique combination of
two different attachments led to virtually a PM0 movement of the prosthesis. Maxillary guidance ramp
and double row of teeth further added to comfort and chewing efficiency.
Conclusion: Rehabilitation of hemimandibulectomy should aim at controlling mandibular rotation and
trismus. Successful utilization of remaining alveolar bone can enhance prosthetic rehabilitation
outcomes and patients quality of life.
Key words: Hemimandibulectomy; Osseointegrated implant supported mandibular prosthesis;
Mandibular guidance; Bar overdenture; Attachment denture
12
Synthesis and Properties of Sr/CS/G Coatings Fabricated via Electrophoretic Deposition
Ma Kena, Wang Yining, Jiang Tao, Huang Dan
Key Laboratory for Oral Biomedical Engineering of Ministry of Education, School & Hospital of Stomatology, Wuhan University
Purpose: The purpose of this study was to enhance the lifespan of the implants applied in the
osteoporosis patients through modifying the surface. Our group has successfully prepared
chitosan/gelatin (CS/G) coatings on the titanium surface via electrophoretic deposition (EPD).
Strontium represents a new promising candidate to prevent and treat osteoporosis. Here, we explored
further to prepare CS/G coatings loaded with strontium via EPD. The physico-chemical properties of
Sr/CS/G coatings were respectively observed.
Methods: SrCl2 were added into the CS/G solutions. Then the Sr/CS/G coatings were made via EPD as
CS/G coatings. Surface morphology of the coatings was observed by scanning electron microscope.
The element analysis of the coatings was observed with EDS. X-ray diffraction pattern (XRD) of the
coatings was measured using an X-ray Diffractometer. The CS/G solution and Sr/CS/G solution were
respectively observed with TEM. MC3T3-E1 cells were seeded on the Sr/CS/G coatings and their
morphology was observed by SEM.
Results: A lot of particles existed on the surface of Sr/CS/G coatings with a diameter of 1-4μm and the
particles were made up of smaller microspheres and these microspheres were packed with a layer of
organic materials. The results of EDS indicated that Sr/CS/G coatings included C、O、Cl、Sr
2014 Xi’an Conference
104
elements. The atom percentages of Cl and Sr in the non-particle areas were 7.25% and 3.5% and the
atom percentages of Cl and Sr in the particle areas were 2.52% and 8.77%.. According to the analysis
of matter phase of XRD patterns of, it is judged that the diffraction peaks of SrCl2。6H2Oand SrCO3
existed in the XRD patterns of Sr/CS/G coatings. The results of Sr2+
release from the Sr/CS/G coatings
into PBS showed Sr2+
could be continually released within 1 month. The images of TEM indicated that
nanoparticles were formed in the Sr/CS/G solution with a diameter of 200-400nm. The nanoparticles
appeared like core-shell structure. In addition, MC3T3-E1 cells could grow and spread more widely on
the Sr/CS/G coatings observed with SEM.
Conclusion: Sr/CS/G coating could be successfully fabricated on the titanium surface via EPD through
adding strontium chloride into the CS/G solution. Such coating may be a promising candidate for
improving the success rate of implants applied in the osteoporosis patients.
Key words: Implant; Electrophoretic deposition; Strontium; Osteoporosis
13
Application of Obturator Combining Casting Frame in Cystic Lesions of the Jaws
Hu Jian, Du Yifei, Sun Yazhou, Zhang Feimin
Stomatology School of Nanjing Medical University
Purpose: To evaluate the effect of obturator combining casting frame on cystic lesions of the jaws.
Methods: After curing with Marsupialization, twelve patients with cystic lesions of the jaws were
randomly divided into control group (A, n=6) and test group (B, n=6). A were treated with obturator
combining casting frame, those in group B with obturator combining acrylic frame. Patients were
followed up at half year and one year after treatment. Clinic situation and panoramic radiographs were
measured respectively. These indexes of examination include facial deformity, reduction in cyst volume,
plaque index (PI) and patient satisfaction (PS).
Results: One year after treatment, Over 80% reduction in cyst volume together with bone healing
occurred in all case of two groups. The facial deformity o f all patients was resolved. The obturator
combining casting frame obtained higher PS and lower PI than that B group.
Conclusion: The obturator combining casting frame and resin frame were the effective way in the
treatment of cystic lesions of the jaws. Therefore, the obturator combining casting frame was well
received by patients, with which there was more slight interference on periodontal tissue than with the
obturator combining resin frame.
Key words: Obturator; Casting frame; Resin frame; Marsupialization; Odontogenic cysts
14
Using the Folded Fibula Flap and Dental Implants to Repair Mandibular Defects at the Same Period
Li Ming, Wu Yunong, Jiang Hongbing, Xing Shuzhong, Tao Zhenjiang
Stomatology School of Nanjing Medical University
Purpose: To summarize the advantages using the folded fibula flap and dental implants to repair
mandibular defects at the same period, and observe its clinical efficacy.
Methods: 28 cases were collected from January 2001 to December 2012, using the folded fibula flap
and dental implants to repair mandibular defects at the same period in the Affiliated Stomatological
Hospital of Nanjing Medical University. According to the defects location and characteristics, fibula
flaps were folded into a "double-barreled" type, with a total of 76 implants implanted. Dental teeth
2014 Xi’an Conference
105
were fixed after 6-12 months.
Results: Of 28 cases of fibular flap, 26 cases survived (survival rate 92.86%), 2 flaps removed because
of postoperative necrosis. 68 dental implants played a good function after 2 years (2-year survival rate
89.47%). Postoperative X-ray showed a high degree of satisfaction with the reconstruction of the
mandible, the fibula flap and contralateral mandibular stump healed well and implants got
osseointegration. After 2-5 years follow up, the patients have no serious complications, and have
satisfied function and good shape.
Conclusion: Using folded fibula flap and dental implants to repair mandibular defects at the same time
can achieve satisfactory form and function, it is a good choice for the hospital that can do it.
Key words: Fibular osteomyocutaneous flap; Dental implants; Mandibular defect
15
Clinical Evaluation of Prostheses Retained by Tooth-implant and Natural Teeth Combined with Extracoronal Magnetic Attachments for Unilateral Mandibular Defects
Liu Xiaofang, Song Guangbao, Zhu Xiaobin, Shi Yong, Xie Liben, Gao Limin, Xue Guochu
Guangdong Provincial Stomatological Hospital, Affiliated Stomatological Hospital of Southern Medical University
Purpose: To explore the clinical effect of unilateral mandibular defects repaired by Tooth-implant and
natural teeth combined with extracoronal magnetic attachments prostheses.
Methods: In 5 cases of patients with unilateral mandibular defects as a result of mandibular tumor,
Tooth-implant and natural teeth combined with extracoronal magnetic attachments prostheses were
applied to repair the defect of mandible and the loosed teeth.
Results: The facial contour and the functions of mastication, deglutition, suck, pronunciation were
obviously improved after wearing the prostheses.
Conclusion: The Tooth-implant and natural teeth combined with extracoronal magnetic attachments
prostheses can effectively improve occlusal function and quality of life of patients with unilateral
mandibular defects.
16
To Reconstruct Attached Soft Tissue around Dental Implants by Acelluar Dermal Matrix Grafts and Resin Splint
Liu Changying, Geng Wei, Li Jun, Ma Pan, Tan Baosheng
Department of Dental Implantology Centre, School of Stomatology, Capital Medical University
Purpose: The purpose of this study was to recommend a new method using acellular dermal matrix
graft and resin splint to reconstruct the attached soft tissue around dental implants in patients with
maxillofacial defects.
Methods: Total 8 patients (3male and 5 female patients) diagnosed with maxillofacial defects and
dentition defects caused by tumors, fractures or edentulous jaw, were selected for this study. Dental
implants were routinely implanted at the edentulous area. Acellular dermal matrix heterografts and
resin splint were used to increase the attached soft tissue. The width of attached gingiva in the labial or
buccal surface at edentulous area was measured before surgical procedures and after the completion of
superstructures. Paired t-test was applied to assess the change of quantitative variables. All tests were
2014 Xi’an Conference
106
2-tailed, and P< .05 was considered statistically significant.
Results: The dense connective tissue around implants can be reconstructed one month after the
completion of surgical procedures, and the epithelial cuff around the implant neck established very well.
The width of attached gingival tissue in the patients increased significantly from a mean of
0.61±0.75mm to 6.25±1.04 mm.
Conclusion: The acellular dermal matrix graft could be used to increase the attached gingiva around
dental implants in these patients with maxillofacial defects. The resin splint could facilitate the healing
of graft.
Key words: Peri-implant attached soft tissue; Implant; Acellular dermal matrix; Maxillofacial defect
17
The Pickup Technique Combined with Surgical Guide Template on the Immediate Fixed Restoration in the Rehabilitation of Complete Edentulous Jaws
Ma Pan, Geng Wei, Li Jun, Tan Baosheng, Liu Changying,
Department of Dental Implantology Centre, School of Stomatology, Capital Medical University
Purpose: To evaluate the preliminary clinical results of surgical guide template and the pickup
technique on the immediate fixed restoration in the rehabilitation of complete edentulous jaws.
Methods: This clinical study included 10 patients treated from February 2009 to February 2013 in
Beijing Stomatological Hospital of Capital Medical University. Sixty-four implants were placed
supporting ten prefabricated fixed complete dentures. Recall examinations included survival of
implants, clinical function of prostheses and marginal bone resorption. The deviations between the
actual placed and the planned implants were measured in 9 cases with 56 implants. The pickup
technique and the routine methods on the immediate fixed restoration were compared. The satisfaction
was assessed between using the traditional denture and the implant-supported fixed dentures.
Results: ① Sixty-four implants were successfully guided and placed, on which 10 prostheses were
immediately fixed. 2 implants in one patient were lost at 2 months after immediate loading making the
implant survival rate 96.875%. During following observation time the implants and restorations were
of good immobility and stability. ② An average angular deviation of 56 implants was 3.12°as
compared with the planning, while the mean linear deviation was 1.04mm at the hex , 1.53mm at the
tip. ③ Compared with conventional methods, the pickup technique is the more obvious advantages for
immediate load restoration in the rehabilitation of complete edentulous jaws. ④Compared with
traditional dentures, the satisfaction degree of the implant-supported fixed dentures was significantly
higher in pronunciation, retention, comfort and mastication (P<0.05).
Conclusion: The preliminary clinical results showed computer-guided surgery protocol and the pickup
technique was predictable and satisfying for edentulous Chinese patients.
Key words: Dental implantation; Edentulous jaw; Immediate loading; Computer-guided surgery;
Surgical template; the pickup technique
18
Functional Reconstruction of Maxillary Defect with Zygomatic and Conventional Dental Implants after Tumor Resection
Wu Yiqun, Huang Wei, Wang Feng, Zhang Zhiyong, Zhang Chenping, Sun Jian, Zhang Zhiyuan
2014 Xi’an Conference
107
Department of Oral and Craniofacial Implant, Shanghai Ninth People's Hospital, School of Medicine, Shanghai Jiao Tong University
Purpose: Functional reconstruction of maxillary defect due to tumor resection poses a challenging
problem in maxillofacial surgery. This study was aimed to evaluate the clinical status and success rates
of zygomatic and dental implants for orofacial reconstruction following ablation of tumors. Patient
satisfaction after maxillary reconstruction was also assessed with regard to function and comfort.
Methods: Over a 6-year period, patients with maxillary tumors underwent resection with either
immediate or delayed bone grafting reconstruction combined with implant supported fixed prostheses
or with implant supported obturators. The patients received 88 implants in total, including 9 zygomatic
and 79 conventional implants, for maxillary rehabilitation of the defective areas.
Results: Six patients were restored with implant-supported obturators and 18 patients were
rehabilitated with implant-supported fixed prostheses. Patient follow-up was started at the point of the
implant loading. The average follow-up was 99.1 months (range: 18–137 months). One patient died
after 18 months of follow-up due to tumor recurrence, and two patients were lost to follow-up after 3
years of observation. Ten conventional dental implants were removed due to peri-implantitis. The
cumulative survival and success rates of the implants were 88.6 and 86.3%, respectively. Most patients
treated in the study were fully satisfied with their facial contours, prosthesis comfort, pronunciation and
prosthesis function.
Conclusion: This study demonstrated that rehabilitation of maxillary defects following tumor resection
with autogenous bone grafting combined with implant supported fixed prostheses or implant supported
obturators is successful and is associated with high patient satisfaction. Oral function can be well
restored with dental implants for patients with maxillary defects.
Key words: Conventional implant; Maxillary defects; Prosthesis; Tumor; Zygomatic implant
19
Reconstructed the Completed Mandible Defect with Bilateral Fibula Grafts and Dental Implantation
Liao Guiqing, Su Yuxiong, Zheng Guangsen, Liang Yujie, Zhang Sien, Neungkhotapajjai
Hospital of Stomatology, Guanghua School of Stomatology, Sun Yat-sen University
Purpose: This report described the operation and reconstruction of a complete mandible defect due to
recurrent osteosarcoma.
Methods: Computer-aided mandibular reconstruction involves three steps: virtual surgical planning,
rapid-prototyping procedures for the design and manufacture of the customised surgical device and
surgery. A CAD/CAM surgical guide was projected to aid the repositioning of fibula bone segments in
the patients. After 3 years followed up, the osteosarcoma displayed no recurrence. After careful
assessment of the bilateral fibula grafts, the All-on-four implant skill was use to gain the dental
implantation.
Results: Follow up 2 years, the patient was satisfied with the result in facial esthetics and chewing
function from the implant-supported denture. Tissues around implants were in good health, and the
prostheses remained well-fitted. The patient was extremely satisfied with the final result.
Conclusion: All-on-four dental implantation supporting by bilateral fibula grafts, is suitable and safety
for the patient of complete mandible defect. It gains esthetic appearance and good function.
2014 Xi’an Conference
108
20
Efficacy of Implant-supported Maxillofacial Prosthetics
Neal Garrett, John Beumer III, Scott Recksiedler
UCLA Dental/Medical
Purpose: The primary aim of this longitudinal prospective study has been to determine whether
conventional or implant supported dental prosthesis and current surgical reconstructive procedures
restore patient’s oral function and quality of life to their status prior to the ablative oral cancer surgery.
The study was designed to compare conventional dental (CD) prosthesis and implant retained dental
(ID) prosthesis in subjects scheduled to undergo a maxillectomy. Hypothesis included: (1) the CD
restores oral functions and perceptions to pre-cancer levels; (2) the ID restores oral functions and
perceptions to pre-cancer surgery levels; and (3) the CD and ID are equally effective in restoring oral
functions and perceptions. The primary outcome variable was defined as masticatory performance.
Methods: A total of 20 participants receiving a partial or total maxillectomy were enrolled in the study.
Detailed clinical evaluations and a series of subjective assessments and objective oral functional tests
were made at entry. The same measurements were repeated after post-surgical recovery with immediate
surgical obturation, definitive conventional dental prosthesis, and definitive implant retained dental
prosthesis.
Results: Mean age of patient was 69 years. Out of the 20 patients’ enrolled 14 were diagnosed with
primary tumors and 6 with recurrent tumors. All subjects were required to be edentulous as an inclusion
criterion. Masticatory performances at entry were less than half of that for an average denture wearer
(35%) on both the defect (5.5%) and the non-defect (10.8%) sides. This extreme impairment was
maintained after surgery. After restoration with the CD, slight increases in performance to 11.5% and
13.3% were seen for the defect and non-defect side respectively. No additional improvement was seen
with the implant retained prosthesis.
Conclusion: No difference was seen in performance scores between CD and ID.
Key words: Dental Implants; Maxillary Defects; Obturator; Maxillectomy
21
Use of Implants to Retain Facial Prostheses: the UCLA Experience.
Nicholas Goetz
Division of Advanced Prosthodontics, School of Dentistry, UCLA
Purpose: Present the UCLA experience with these devices as well as describe how the design of the
retention apparatus has evolved through the years.
Methods: UCLA clinical experience & Literature review.
Results: Osseointegrated implants have been used effectively during the past 30 years. Auricular &
Nasal implant supported prostheses have proven to have good success, while orbital implants have
proven to have a lower overall implant success rate.
Conclusion: Implant restorations are an integral part of the present as well as the future of
maxillofacial prosthetics Implant retained prostheses have shown a higher survival for auricular defects,
with the lowest survival found in orbital defects. Implant retained prostheses in irradiated patients have
shown as lower survival rate. Potential increase in survival rate for orbital & nasal prostheses may be
found in the use of intra-oral longer implants.
Key words: Implants; Craniofacial; Prostheses; Retention
2014 Xi’an Conference
109
22
Pulsed Electromagnetic Fields Effects on Swelling and Pain after Implant Surgery: a Double-blind, Randomized Study
Paolo Pera
University of Genoa
Purpose: The aim of this split-mouth, double-blind, randomized study is to evaluate if pulsed
electromagnetic fields treatment can improve swelling and pain management after a full-arch
immediate loading implant surgery.
Methods: Ten patients were selected for the study. Each patient received four implants in the upper or
lower jaw using distal tilted implant and underwent a full-arch immediate loading rehabilitation.
After surgery two pulsed electromagnetic fields (PEMF) devices were applied on the right and the left
cheek of each patient. Randomly one PEMF device was switched on (test side), applying the other one
as a placebo (control side).
48 hours after surgery clinicians estimated the postoperative swelling through photographic
documentation, comparing the condition prior and after surgery, while pain was assessed using a verbal
rating scale. Patient’s comfort degree in relation to PEMF devices was analyzed by questionnaires
using a numerical rating scale.
Results: No differences were observed between the test side and the control one as regards swelling
and pain. Most of patients did not present swelling or pain 48 hours after surgery, without distinction
between PEMF device activated and not. Variable outcomes emerged from comfort evaluation.
Conclusion: Within the limits of this study, PEMF does not reduce postoperative swelling and pain
after immediate loading implant surgery.
Key words: Immediate loading; Implant surgery; Pulsed electromagnetic field (PEMF); Postoperative
swelling; Pain
23
Mandibular Defect Reconstruction with Fibula Flap and Non-vascularized Fibula Bone
Shan Xiaofeng, Liang Jie, Lu Xuguang, Zhang Lei, Cai Zhigang
Department of Oral and Maxillofacial Surgery, School and Hospital of Stomatology, Peking University,Beijing, China
Purpose: The vascularized free fibula flap has become the most popular reconstruction method for
segmental mandibular defect because of adequate bone graft length and acceptance of dental implants.
While because of the height discrepancy between the native mandible and transplanted fibula, it is
difficult to wear conventional dentures or do osseointegrated implants. The purpose of this study was to
research if mandibular defect could be reconstructed with fibula flap and non-vascularized fibula bone
to get a better contour and high neo-alveolar bone.
Methods: 12 patients received mandible reconstruction with fibula flap and non-vascularized fibula
bone. In the operation, fibula flap was used to reconstruct the mandible as the inferior portion or
superior alveolar portion. The non-vascularized fibula bone was fixed to the fibula flap with titanium
plate or screws to augment the height of fibula bone. The periosteum between vascularized and non-
vascularized fibula was removed to get a better attachment between vascularized and non-vascularized
fibula.
Results: The operation proceeded very smoothly in all 12 cases. The follow up time was 1 month to 24
months. All patients got a good appearance, and the bone height improved 5 to 18mm compared with
conventional one-strut type technique. In all 12 cases, non-vascularized fibula was used to reconstruct
alveolar bone in 4 cases, 1case suffered infection in 1 month after operation; non-vascularized fibula
2014 Xi’an Conference
110
was used to recover the low border of mandible in 8 cases, 1 case suffered infection in 1 week after
operation. Two patient received operation to remove titanium plate in 6 months after operation, bone
coalescence was found between vascularized and non-vascularized fibula. Non-vascularized bone
resorption was obviously. The space in non-vascularized fibula bone was filled with granulation tissue.
Conclusion: It is a good choice to reconstruct mandibular defect with fibula flap and non-vascularized
fibula bone to get a better contour and high neo-alveolar bone. And we prefer to use the vascularized
fibula bone to reconstruct the superior portion of mandible, and use non-vascularized fibula bone to
reconstruct the inferior portion of mandible.
Key words: Mandible defect; Fibula flap; Non-vacularized fibula
24
4 Implant-supported Bridge for Mandibular Defects with Vascularized Fibular Osteomyocutaneous Flap
Song Guangbao, Liu Xiaofang, Shi Yong, Wang Xianfeng, Gao Limin, Xie Liben
Guangdong Provincial Stomatological Hospital, Affiliated Stomatological Hospital of Southern Medical University
Purpose: The success of mandibular tissue supported implant prostheses varies in the literature, and
the ideal protocol may be elusive from given the numerous studies. This clinic report is to study the
reliability of 4 implant-supported bridge for oromandibular defects with vascularized fibular
osteomyocutaneous flap.
Methods: 3 patients with mandibular ameloblastoma were operated by Subtotal of mandible and
reconstructed with vascularized fibular osteomyocutaneous flap.6 months later the new mandible were
receipted 4 implants, and reconstructed with full bridge after 3 months healing periods.
Results: 3 patients were successful to complete 4 implant-supported prosthesis, and long term effect
was stable after 3-4 years.
Conclusion: The study indicates that the 4-implant supported prosthesis provides predictable results
for oromandibular defects with vascularized fibular osteomyocutaneous flap.
25
The Effectiveness of Implant Overdenture Treatment for the Severe Bone Resorption case
Tetsuo Ohyama, Hiroyasu Yasuda, Satomi Tadokoro, Tomohiko Ishigami
Nihon University School of Dentistry
Purpose: In mandibular edentulous with severe bone resorption cases, improvement in retention and
stability of dentures can be achieved by fabrication of implant assisted overdentures using two
abutments. In this study, using three-dimensional finite element analysis, indications of implants and
denture behavior depending upon differences in the morphology of residual ridges were compared and
evaluated.
Methods: Three models that simulated treatment using complete dentures were prepared, including a
normal mandibular edentulous case, a mandibular edentulous case with severe bone resorption in the
left posterior region and a mandibular edentulous case with severe bilateral bone resorption in the
posterior regions. In addition, models simulating implant placements in both canine areas for
overdentures were prepared for each model, resulting in a total of six different models.
Results: The implant overdentures, as compared with the conventional dentures, denture movement
was very small. It was found that dentures tended to shift toward the side with severe bone resorption.
2014 Xi’an Conference
111
Conclusion: In cases with implant placement, retention and stability of dentures improved since
denture movements were limited by implants.
Key words: Implant over denture; Sever bone resorption; Finite element analysis
26
The Effect of Different Doses of Radiation on the Rat Osteoblasts in Vitro
Wang Ying, Ren Weihong
Department of Prosthodotics, Capital Medical University School of Stomatology
Purpose: The implant-retained obturator prosthesis is the only way to restore the maxillary defects and
edentulous jaw. But there is a huge risk for patients who received the radiotherapy in this plan. This
risk refers to the harmful bone transplantation, as well as the implant failure. The reason is that
radiation not only can kill cancer cells but also has bad influence on bone tissue. To study the radiation
damage, it is considered that the model in vitro is better than the model in vivo. The cultured
osteoblasts were irradiated with X-ray to establish the irradiated model in this study. The effects of
radiation of different doses on the osteoblasts were observed, in order to illustrate the damage of the
osteoblasts with radiation of different doses, to provide laboratory evidence for restoration of the
implant-retained obturator prosthesis for patients who received the radiotherapy.
Method: The cultured osteoblasts were irradiated with X-ray at2, 4, 6 and 8Gy respectively to establish
the irradiated model. The changes in morphology, proliferation, alkaline phosphatase (ALP) activity
and mineralization, osteocalcin level and the mRNA levels of intracellular ALP and COLⅠ were
investigated.
Results: All the above mentioned indices were significantly decreased after irradiation. There was a
close relationship between the enhanced impairment and the increase of irradiation dosages.
Mineralization capacity presented dual phase change (promoting effect of 2 Gy and inhibition of 8 Gy),
the mRNA levels of intracellular ALP and COLⅠ significantly decreased.
Conclusion: The radiation injury of the osteoblasts is mainly due to the impairment of the proliferation,
physiological function. But their sensitivity to the ionizing radiation is different.The restoration of
implant-retained obturator prosthesis for patients who received high dose of radiation should be
avoided.
27
Study of Coralline Hydroxyapatite Blocks Used in Reconstructing Alveolar Bone Height in Posterior Mandible
Xu Shulan
Guangdong Provincial Stomatology Hospital
Purpose: Comparing coralline hydroxyapatite blocks to autogenous block bone for clinical effects of
bone height augmentation of posterior mandible via onlay grafting, the topic discusses clinical
operation feasibility and healing of coralline hydroxyapatite blocks through wedging force.
Methods: Choose 37 patients (male 20, female 17) with partly edentulous posterior mandible receiving
dental implants in implantation center of Guangdong province stomatological hospital from 2010-01 to
2014-01. These patients were randomly divided into two groups. 19 patients (group A) were treated
with coralline hydroxyapatite blocks via wedging force of box-shaped hole, while 18 patients were
treated by means of autogenous bone block through titanium screws. Conventional placement of dental
implants was performed after bone augmentation. (1) Panoramic radiographs were taken preoperatively,
immediately after the bone grafting procedure, at the time of implant placement, at the time of second-
2014 Xi’an Conference
112
term surgery, and annually after prosthetic rehabilitation. Compare absorption of bone height between
group A and group B in corresponding periods. Mann-Whitney test was computed and P<.05 was
considered significant. (2) Using the Mann-Whitney test, based on marginal bone level L2 Immediately
after implants placement, marginal bone levels of implants were calculated immediately after prosthetic
completion (T3), one and two years thereafter (T4 and T5). The difference between marginal bone
levels was recorded as L3-L2, L4-L2 and L5-L2. Using the Mann-Whitney test, P less than 0.05 was
statistically significant.
Results: (1) Graft success rate and statistical analysis between group A and group B: of 19 patients
(group A) treated with 39 pieces of coralline hydroxyapatite blocks, 2 patients (containing 4 pieces of
coralline hydroxyapatite blocks) failed to attain bone height augmentation, because one case had poor
blood supply in recipient area, and another had poor retention on account of osteoporosis. Graft success
rate was 90% in group A. Of 18 patients (group B), one wound dehisced and bone graft failed, resulting
in success rate of 94%. Through chi-square test, there was no statistically significant difference for
graft success rate between the two groups(P<0.05).(2) Comparison of the stability of increased bone
height and statistical analysis between group A and group B: after vertical onlay bone graft, vertical
Bone resorption from graft placement to implant placement was significantly lower in group A
( P=0.001 ) ;vertical Bone resorption from graft placement to prosthetic rehabilitation was
significantly lower in group A(P=0.001); vertical Bone resorption from graft placement to 1 year
after prosthetic rehabilitation was significantly lower in group A (P=0.002);vertical Bone resorption
from graft placement to 2 years after prosthetic rehabilitation was significantly lower in group A
(P=0.012). Peri-implant soft tissue health of all patients is good, and no patients had significant
symptoms of peri-implantitis.(3) Peri-implant bone resorption between A and B groups: based on
implant marginal bone level (L2), peri-implant bone resorption (L3-L2) in group A was less than that
in group B at prosthetic completion, being statistically significant(P=0.028);Group A was less than
group B for peri-implant bone resorption at one and two years after prosthetic completion(P=0.025
and P=0.013). Peri-implant bone resorption among three phases in group A and B was significantly
different, with peri-implant bone resorption the minimum half of year after bone grafting and that the
maximum 2 years after prosthetic completion.
Conclusion:1. Coralline hydroxyapatite blocks had good operation feasibility and reliable clinical-
retention effect via wedging force of box-shaped hole in edentulous posterior mandible.2. Both
coralline hydroxyapatite blocks and autogenous bone can effectively recover posterior mandibular
vertical height and the success rates are not statistically different. The stability of bone height increased
by means of coralline hydroxyapatite blocks is favorable.
28
Review of Implant Outcomes on Fibula Free-flap Reconstruction for the Resected Mandible
Xuan Yue
Advanced Prosthodontics Resident, UCLA
Mandibular reconstruction by vascularized free fibula flap has become the most popular reconstruction
method. It has dramatically broadened the possibilities for dental reconstruction and improved the
quality of life of these patients undergone mandible resection surgery. Traditionally, a conventional
prosthesis can be used for dental rehabilitation. However the function it provides is limited. With the
introduction of osseointegrated implants in these grafted sites, the patient’s function and esthetics can
be greatly enhanced. The implant placement technique used in fibula flap is similar to the technique
utilized in a non-resected mandible. While the success rate of these implants can be favorable, there is a
concern on the long-term success once these are restored with a prosthesis. The aim of this review is to
explore various methods of implant placement protocols for an implant-supported prosthesis after
fibula free-flap reconstruction. These techniques along with their advantages, limitations and survival
outcome of these implants will be presented.
2014 Xi’an Conference
113
29
Effect of Pore Size and Porosity on Cytocompatibility of Porous NiTi Alloys
Wang YiChen, Liu Shuai, Zhao Ke
Hospital of Stomatology, Guanghua School of Stomatology, Sun Yat-sen University
Purpose: To study the effect of pore size and porosity on the mechanical and biological properties of
porous NiTi alloy for orthopedic applications, and seeking the optimal pore size in terms of the
cytocompatibility.
Methods: Five porous NiTi alloy samples were fabricated with NH4HCO3 powder as a temporary
space-holder and pore-size regulator of specified amounts. Microstructural surface characteristics and
pore morphology were visualized using metallographic microscopy. Three groups of porous NiTi alloy
were selected by compressive and three-point bending tests using a universal testing machine. hFOB
1.19 cells were cultured in the three groups, while commercial pure Ti (cp Ti) and tissue-cultured plates
(TCPs) were used as control. Cytocompatibility was examined by cell adhesion, cell proliferation,
alkaline phosphatase and scanning electron microscope.
Results: Porous NiTi alloy exhibited a lower Young’s modulus (2.0-0.8 GPa). Its compressive strength
decreased gradually with increasing MPS (108.8–56.2 MPa; p < 0.05) and its Fracture strength was
64.6-41.6 MPa (p<0.05). Cells grew and spread well on all porous NiTi alloy samples. Cells attached
more strongly on cp Ti and TCPs than on all porous NiTi alloy samples (p < 0.05). Cell adhesion on
porous NiTi alloy was correlated negatively to MPS (277.2–566.5 μm; p<0.05). More cells proliferated
on pure Ti and TCP than on all porous NiTi alloy samples (p<0.05). Cellular ALP activity on all porous
NiTi alloy samples was higher than on cp Ti (p<0.05).
Conclusion: The mechanical properties of the porous NiTi alloy can be well adjusted by using
NH4HCO3 with different amounts and particle sizes. The porous NiTi with optimized pore size could
be a potential orthopedic material.
30
Survival, Functions, and Complications of Oral Implants Placed in Bone Flaps in Jaws Rehabilitation-a Systematic Review
Zhang Lei
Department of Prosthodontics, School of Stomatology, Peking University
Purpose: This systematic review attempted to answer the focused questions: “What is the survival rate
of implants placed in bone flaps in jaws rehabilitation?” and “What are the function gains and the most
common complications related to these implants?”
Methods: An electronic search without date or language restrictions was undertaken in PubMed and
EMBASE from the earliest available dates through July 2014. Titles and abstracts from the results were
read by two examiners for identifying studies that meet the inclusion criteria. Subsequently, the
reference lists of the relevant publications were searched. Descriptive statistics were utilized to report
all the data related to the survival rate of implants placed in bone flaps in jaws rehabilitation, the
function gains and the complications related to these implants.
Results: A total of 13 studies were included for systematic review without repetition. The follow-up
period ranged from 1 to 10 years. Within the limitation of available studies, the survival rate of
implants placed in bone flaps in jaws rehabilitation ranges from 79.9% to 100%. However, available
studies investigating long-term outcomes seemed scarce. The most common complications related to
these implants reported were peri-implant bone resorption and peri-implant soft tissue proliferation.
Other complications reported included postoperative infection, peri-implantitis and screws fracture.
Factors that affected the suvival rate were reported as follows: types of bone defect and bone flap,
2014 Xi’an Conference
114
specific peri-implant conditions, immediate or delayed placement of the implants, tumor recurrence,
radiotherapy, surgery-related factors, lack of patient cooperation, poor oral hygiene, patient’s age and
gender, etc. Despite some persistent soft tissue problems and implant loss, most patients reached a
satisfactory functional and esthetic outcome. Implant-supported dental prosthetic rehabilitation in
reconstructed jaws improved the quality of life in terms of speech, nutrition, oral competence and facial
appearance.
Conclusion: Implants placed in bone flaps in jaws rehabilitation following ablation for tumors,
osteoradionecrosis or chronic osteomyelitis were demonstrated to be a reliable technique. But
considering multiple influencing factors of jaws rehabilitation outcome, it is suggested that randomized
controlled clinical trials and longer clinical studies should be implemented in this area.
Key words: Implants; Bone flaps; Maxillary rehabilitation; Mandibular rehabilitation; Survival rate;
Complications
31
A Clinical Evaluation of the Implantodontical Obturator Prostheses for Maxillary Defects
Zheng Jie, Jiang Hua, Wang Juncheng, Li Yanan
Department of Stomatology, Chinese PLA General Hospital
Purpose: To evaluate the clinical effectiveness of rehabilitation with implantodontical maxillary
obturator prostheses in individuals with maxillary defect.
Methods: The masticatory efficiency and speech intelligibility of 15 patients with maxillary defects
were measured postoperatively, with or without prostheses.
Results: Significant differences existed both in masticatory efficiency and speech intelligibility for l5
individuals. The masticatory efficiency and speech intelligibility ranged between 32. 5% and 75. 0%
(mean and standard deviations: 56. 0% ±12. 5%) and between 14. 3% and 41. 0% (mean and standard
deviations: 23. 2% ±7. 4%) respectively without prostheses. While obturated by prostheses they were
between 59. 0% and 85. 0% (mean and standard deviations: 79. 0% ±11. 3%) and between 72. 5% and
98. 7% (mean and standard deviations: 81. 8% ±9. 4%) respectively.
Conclusion: The prosthodontic rehabilitation can significantly improve the masticatory efficiency and
speech intelligibility of patients with maxillary defects.
32
Mussel Adhesive Proteins/ Platelet-rich Plasma Composite-Coated Titanium Surfaces Increased Functionality of Dermal Fibroblasts
Wang Zhongshan,Feng Zhihong,Wu Guofeng, Bai Shizhu, Dong Yan, Qin Haiyan, Zhao Yimin
Department of Prosthetics, School of Stomatology, the Fourth Military Medical University
Purpose: Bacterial invasion and epithelial downgrowth with pocket formation are still severe clinic
challenges for transcutaneous implants, and both have closely connections with a lack of stable
biological seal around transcutaneous parts. Dermal fibroblasts are the main cells of extracellular
matrix in skin tissue, and have been proved to play vital roles in the formation of biological seal. This
work is to explore more effective ways to promote fibroblasts adhesion, proliferation and generation of
extracellular matrix for the formation of an early stable closure, then strengthen the long-term stability
of maxillofacial implants.
2014 Xi’an Conference
115
Methods: In this work, platelet-rich plasma (PRP) which can release high concentrations of natural
cytokines upon activation was used to stimulate rapid fibroblast growth. Mussel adhesive proteins
(MAPs) could work as both bio-adhesive and a mediator to anchor blood platelets onto smooth Ti
surfaces stably due to the excellent adhesive ability, and MAPs/PRP composite-coated Ti surfaces were
constructed successfully. In this work, we took advantage of MAPs and PRP technology in order to get
a better biological seal at the transcutaneous sites of implants. Further, the effects of MAPs/ PRP
composite-coated Ti surfaces on biological responses of dermal fibroblasts in vitro were evaluated.
Results: The in vitro study indicated an increased fibroblast adhesion (P<0.05), cytoskeleton spreading,
proliferation (P < 0.05), and up-regulated ECM-related gene expressions including β-integrin (ITGB),
Matrix metalloproteinase(MMP)-1, vascular endothelial growth factor A (VEGFA)(P<0.05),on
MAPs/PRP composite-coated Ti surface compared with control smooth Ti surface. Our results suggest
that the MAPs/PRP composite-coated Ti surface is potentially useful for a stable biologic seal at the
transcutaneous sites.
Conclusion: This study showed the effects of MAPs/PRP composite-coated Ti surfaces on fibroblast
functionality. MAPs were used as a mediator to anchor palates of PRP onto Ti surface, which serve as
an intracellular storage pool of natural cytokines. As such, we successfully designed MAPs/PRP
composite-coated structure for transcutaneous parts of implants, and the in vitro study indicated an
increased fibroblast adhesion, spreading, proliferation, and up-regulated ECM-related genes expression
compared to current smooth Ti surface around the transcutaneous parts of implants. Our results suggest
that the MAPs/PRP composite-coated Ti surfaces may be useful for a stable biologic seal at the
transcutaneous sites, and maybe a potential design for transcutaneous implants.
Key words: Transcutaneous implants; Platelet-rich plasma; Adhesion; Proliferation; Extracellular
matrix
33
What Type of Implants Used for the Irradiated Bone Is the Better: Zirconia or Titanium Implants?
Zhou Wei, Zhao Yimin
Department of Prosthetics, School of Stomatology, the Fourth Military Medical University
Purpose: Zirconia implants have thus become an attractive alternative to titanium. Whether the
zirconia implants could be used in the irradiated bone is not sure. The objective of the present study
was to investigate the impact of radiation therapy on two materials (titanium and zirconia) implants in
the dog mandible.
Methods: Five adult dogs received 40 (20 titanium and 20 zirconia) commercial threaded implants
bilaterally in the mandibles after the premolars extraction. At 12 weeks post-implantation, the mandible
containing implants was external beam irradiated with the biologic equivalent of 5,000 cGy. After 24
weeks healing, the five mandibles with implants were retrieved at sacrifice for mechanical and
histological assessments to evaluate the biomechanical and biological behavior of the implants around
irradiated bone.
Results: The Micro CT results showed that the average the bone–implant contact (BIC) rate of titanium
implants was higher than that of the zirconia implants (44.47%>33.38%).For the parameters
investigated, no statistically significant differences between implants could be detected at 24 weeks
after radiation therapy (P>0.05). More lamellar bone had been observed by the staining of histological
sections around the zirconia implants.
Conclusion: No statistical difference between implants could be demonstrated with any of the methods
used. The trabecular bone microstructure around zirconia implant maybe less damaged than that around
titanium implant after irradiation.
Key words: Radiation Therapy; Titanium; Zirconia; Bone Implant Contact (BIC)
2014 Xi’an Conference
116
34
The Study of Bi-lineage Differentiated ADSCs Sheet to Improve Implant Osseointegration in the Irradiated Bone
Dong Yan, Ren Nan, Zhou Wei, Liu Huan, Zhao Yimin
Department of Prosthodontics, School of Stomatology, Fourth Military Medical University
Purpose: To evaluate the effect of osteogenic and angiogenic bi-lineage differentiated adipose tissue-
derived stem cells (ADSCs) sheet on implant osseointegration in the irradiated bone.
Methods: The lower hindlimbs of rats had external irradiation of a single dose of 20Gy. Eight weeks
later, osteogenic and angiogenic bi-lineage differentiated ADSCs sheet-implant complex (Group A) was
implanted in the tibia of the irradiated rat. Osteogenic differentiated ADSCs sheet-implant complex
(Group B) and traditional pure Ti implant (Group C) were served as control groups. After eight weeks
of implantation, Micro CT assay were conducted in vivo. Then the pull-out tests were proceeded and
the rest of specimens were utilized to make hard tissue slices to analyze the implant osseointegration.
Results: The results of micro CT analysis showed that the bone volume ratio increased significantly in
Group A compared with the control groups, while the trabecular separation decreased significantly in
Group A compared with the other two groups. The bone-implant contacts were 63.48±5.82%,
56.28±6.16%, 42.35±7.22% and the maximal pull-out forces were 105.57±8.73N、92.81±6.34N、77.59±7.04N for Group A, Group B, Group C respectively. Both bone-implant contacts and maximal
pull-out forces were significantly higher in Group A than the control groups.
Conclusion: The osteogenic and angiogenic bi-lineage differentiated ADSCs sheet-implant complex
could improve osseointegration in irradiated rat, which provided a new approach to improve
osseointegration of the impants in the regions received radiotherapy.
Key words: Adipose tissue-derived stem cells; Cell sheet; Implant; Radiotherapy; Osseointegration
35
Biological Characteristics of Osteogenic and Angiogenic Bi-lineage
Differentiated ADSCs Sheet-implant Complex
Nan Ren, Yan Dong, Wei Zhou, Huan Liu, Yimin Zhao
Department of Prosthodontics, School of Stomatology, Fourth Military Medical
University, Xi’an 710032 ShaanXi, China.
Purpose: This study aimed to construct osteogenic and angiogenic bi-lineage differentiated adipose
tissue-derived stem cells (ADSCs) sheet-implant complex and investigate its biological characteristics.
Method: The osteogenic and angiogenic bi-lineage differentiated ADSCs sheet (Group A) and
osteogenic differentiated ADSCs sheet (Group B) were warped on traditional pure Ti implant separately
and the obtained complexes were cultured in vitro for 4weeks. ALP activity and the expression of
BMP-2 and VEGF of the complex surface were investigated after 1d, 14d and 28d of culture. Then the
complexes were implanted into subcutaneously pockets of severe combined immunodeficiency mice.
After 8 weeks’ transplantation, Micro CT assay was conducted in vivo. Then recover the complex, strip
the tissue around it and stain with HE to observe its microstructure.
Results: The in vitro assays showed that Group A expressed higher level of ALP, BMP-2 and VEGF
compared with Group B. The in vivo Micro CT images showed that the tissue around the implant had a
mineral density similar to that of native bone in both groups, while the tissue of Group A was thicker
than Group B. HE staining was also confirmed this, showing that more trabecula and microvascular
structure formed in Group A compared with Group B.
2014 Xi’an Conference
117
Conclusion: In this study, osteogenic and angiogenic bi-lineage differentiated ADSCs sheet-implant
complex was successfully constructed and the complex possessed excellent osteogenic and angiogenic
activity.
Key words: Adipose tissue-derived stem cells; Osteogenic; Angiogenic; Cell sheet; Implant
36
Auricular Rehabilitation Using Early Loaded Intraoral Endosseous Implants: a Case of Bilateral Anotia
Minati Choudhury, Padmanabhan TV, N. Shanmuganathan
Department of Prosthodontics, Sri Ramachandra University, Chennai, India
Purpose: Craniofacial extra oral implants acquired an important role in auricular rehabilitation. This
poster evaluates the effectiveness of early loaded intraoral endosseous implants for prosthetic
reconstruction of bilaterally missing external auditory meatus and pinna.
Methods: A 16year old female patient with bilateral anotia was referred for prosthetic reconstruction.
Patients was thoroughly evaluated with the reconstruction team involving a ENT surgeon, plastic
surgery and prosthodontist as patient had four failed attempt at surgical ear reconstruction .CT scan was
taken with radio opaque markers to evaluate the bone availability at the proposed implant site. Four
intraoral wide diameter (5x7.3mm) endosseous implants (Neo biotech IS) were placed under
GA .Single stage procedure was followed with the healing collar placed at the time of implant surgery
and umbilical tape was wound over it with sterile dressing to form tissue cuffing. The implants were
longer than the regular extraoral implants providing more initial stability. Also the initial clamping
force is excellent as a strong streamlined thread extends to the end of the apex and advantageous for bi-
cortical fixation. This design of the implant helped in early loading of the implant. After 10 days post
surgery impression procedure was carried out and silicon prosthetic ear was given with bar and clip
attachment.
Results: No skin infection, extrusion or bony complication was encountered during the follow up and
the result was well appreciated.
Conclusion: Implanted under guidance of an appropriate team and with the proper selection of implant
design intraoral implants can also be viable option for craniofacial prosthetic reconstruction.
Key words: Intra oral endosseous implant; Auricular prosthesis; Early loading
Session III - Tissue Engineering and Maxillofacial Rehabilitation
1
A Nvel Nno-bilayer Cllagen/Citosan Cmposite Mmbrane for Gided Bne Rgeneration 1Bo Gao,
2Xiang Li
;,1Yan Dong
1 Department of Prosthetic dentistry, College of Medicine, Second Affiliated Hospital, Zhejiang University, Hangzhou, China
2 Material college, Zhejiang University, Hangzhou, China
Purpose:The purpose of present study was to develop a bi-layer membrane. TypeⅠ collagen
/chitosan/ poly(ethylene oxide) nanofibrous film with porous allowing cells adhesion and
2014 Xi’an Conference
118
proliferation;Collagen/chitosan film was on the opposite surface with freeze-dried for inhibition cells
invasion.
Methods: Chitosan or collagen dissolved in 1%(v/v) HAc solutions to prepare a 2% and 0.5% (w/v)
solution, respectively. After removing entrapped air-bubbles, the mixed solution frozen at -20℃、-
40℃、-80℃ for several hours,lyophilized for 24h to obtain a porous membrane. Various weight
percents of chitosan/collagen in 3%(v/v) HAc solution mixed with PEO were homogenized, solution
was loaded into a 5ml syringe and connected to stainless steel needle tip by rubber tube. The solution
was electrospun and the fibers were collected on aluminum foil covered with the previous fabricated
film. The bi-layer composite membrane crosslinked with Glutaraldehyde vapor. Mechanical strength
and morphology and biocompatibility evaluated by SEM, MC3T3-E1and MTT.
Results: Homogeneous nanofibers can be fabricated by electrospinning. Scanning electron microscopy
observed that scaffold structure of the freeze-dried film side was dense and almost non-porous of cross-
section; the nanofibers film side was a high porosity. Tensile strength of freeze-dried film was 0.6MPa
and pressurized film was 4.04MPa ,which was similar to Haiau film of 4.96MPa. MC3T3-E1 spread
well on the surface of the nanofibers. SEM images indicated that cells on the nanofibers also migrated
through the pores into nanofiber mesh , which was beneficial for the three-dimensional repair of
damaged bone tissue. Cell proliferation on collagen/chitosan nanofibers in vitro show that after 7-day
culture, the number of cells increased with the culture time and much higher than control group, which
implied the porous fiber structure favored cells attachment.
Conclusion: The bi-layer film showed favorable biocompatibility and promoted cells attachment and
proliferation in early stage according to MTT test. Our preliminary research indicated that the bi-layer
film have the potential to be a well substitute for guided bone regeneration.
Keywords: Electrospinning; Collagen; Chitosan; Composite membrane; Guided bone regeneration
nano- fiber bilayer collagen/chitosan composite membrane
2
Segmental Mandibular Defect Reconstruction Using Prefabricated Bone-implant Grafts or Autogenous Bone Grafts with Simultaneous Implantation: an Experimental Study in Dogs
Cheng Lin, Zhongcheng Gong, Zhao quan , Hao Wen
1 Post-doctor in Clinical Postdoctoral Research Station, the First Teaching Hospital of Xinjiang Medical University, Xinjiang Medical University, Urumqi, Xinjiang, China
2 Department of Oral & Maxillofacial Surgery, No.474 Military Hospital, Urumqi, Xinjiang, China
3 Oncology Department of Oral & Maxillofacial Surgery, the First Teaching Hospital of Xinjiang Medical University, Stomatology Faculty of Xinjiang Medical University, Urumqi, Xinjiang, China
4 Digestive and Vascular Surgery Center, the First Teaching Hospital of Xinjiang Medical University, Xinjiang Medical University, Urumqi, Xinjiang, China
Purpose: To evaluate a new method for functional reconstructing of segmental mandibular
discontinuity defects using prefabricated ilium-implant grafts.
Methods: Eighteen Beagle dogs were randomly divided into three groups of six. The experimental
group received bone grafts with prefabricated implants (PR group). The IM group received immediate
simultaneous autogenous ilium and dental implant insertion and the control group received dental
implant insertion 3 months after the ilium transplantation. In all animals, a 25 mm bone defect was
created on one side of the mandible. In the PR group, the defect was reconstructed by an ilium-implant
graft, prefabricated 2 months prior to surgery. Animals in the PR and IM groups were sacrificed 2
2014 Xi’an Conference
119
months after transplantation while animals in control group were sacrificed 3 months after implantation.
The healing process was evaluated clinically, histologically and biomechanically. Morphometry
measurements were made using Micro CT.
Results: The prefabricated (PR) implant group demonstrated superior bone formation to the immediate
(IM) implant group. The bone-implant contact (BIC%) was 38.63±8.37% vs. 23.87±4.48%; p<0.05,
bone volume/tissue volume (BV/TV) was 28.70±4.66 vs. 18.42±5.25; p<0.05, trabecular thickness
(Tb.Th) was 0.92±0.17 vs. 0.39±0.14; p<0.05 and trabecular number (Tb.N) was 1.18±0.25 vs.
0.57±0.20; p<0.05). There were no significant differences in these parameters between the PR and
control groups. The implant displacement force was 215.74N±14.29 N in PR group and
136.48N±19.67 N in IM group (p<0.05).
Conclusion: Prefabricated ilium-implant grafts shorten the treatment period and augment peri-implant
bone tissues making the procedure a viable option for reconstructing segmental mandibular defects.
Key words: Mandibular reconstruction; Bone grafting; Prefabricated composite grafts; Autogenous
bone; Dental implant
3
Analysis of Brain Activity in Patients with Chewing-Side Preference During Chewing: An FMRI study
Hua Jiang, Hongchen Liu, Gang Liu, Zhen Jin, Yanan Li, Lin Wang
Department of Stomatology, Chinese PLA General Hospital
Purpose: Investigate the activation characteristics of cerebral cortex in participants with CSP during
rhythmic chewing movement.
Methods: Sixteen right-handed participants with left (2 males: 29.0±8.4 years old, 6 females: 32.3±4.8
years old) or right (4 males: 31.0±6.1 years old, 4 females: 30.8±4.7 years old) CSP were scanned by
functional magnetic resonance imaging during rhythmic chewing. The on-off sequence of scanning was
30s of rhythmic chewing and 30s of rest (off) a total of 5 times.
Results: The results showed that blood oxygen level–dependent signals in the contralateral (to the CSP)
primary sensorimotor cortex increased more than in the ipsilateral primary sensorimotor cortex in
participants with both left and right CSP (P≤0.001). Moreover, the BOLD signal within the right
substantia nigra of midbrain, brainstem was more significantly (P≤0.001) activated than its left
counterpart in participants with left CSP while no activation was observed in those with right CSP
except for one participate in the individual-based analysis. The inferior parietal lobule, inferior frontal
gyrus and left insular cortex were significantly (P≤0.001) activated in participants with right and left
CSP.
Conclusion: These findings suggest a relationship between hemispheric dominance and CSP in the
primary sensorimotor cortex responsible for rhythmic chewing movement. The brainstem might also
play important role in the regulation of CSP.
Key words: Chewing-side preference(CSP); Cerebral cortex; Functional magnetic resonance imaging;
Chewing
4
Comparison of EGF and bFGF Expression in Vivo and Their Effect in Vitro
Jiarong Liu, Lijuan Zhu, RanYu, Chenguang Zhang, Lili Chen
Huazhong University of Science and Technology
2014 Xi’an Conference
120
Purpose: Oral mucosal wound healed faster and with minimal scar formation compared with dermal
wounds. The present study tried to found useful information in scarless oral wound healing process.
Methods: This study firstly evaluated the effect of EGF and bFGF on the proliferation and migration
of isolated fibroblasts from oral mucosa and skin. Then an liner wound was made in SD rats on
transplanted oral mucosa and control skin.
Results: In vitro study we found that both bFGF and EGF could promote the migration of dermal
fibroblasts but not for oral fibroblasts. The oral fibroblasts proliferation was more sensitive to different
concentrations of EGF, while bFGF had no significant effect on cell proliferation in this experiment.
Our in vivo results demonstrated that oral mucosal wound healed with minimal scar after transplanting
to skin and expressed higher EGF. No regular bFGF expression was found either on the transplanted
oral mucosal or dermal wound.
Conclusion: The results suggested that oral mucosa healed with minimal scar mainly due to its
inherent cell phenotypes. The results also implied the important role of EGF played in scar formation.
Key words: EGF; bFGF; keratinocyte
5
Great Auricular Nerve Grafting in The Treatment of Facial Palsy in Parotid Tumor Surgery
Lu Xuguang, CaiZhigang, YuGuangyan, PengXin
Department of Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology, Beijing, 100081, China
Purpose: To assess the long time follow-up nerve function and clinical value of great auricular nerve
grafting in the treatment of facial palsy after parotidectomy.
Methods: From 1998 to 2004, 14 patients with parotid tumors who were treated with great auricular
nerve grafting afterparotidectomywere followed up.( 9 men and 5 women; age range 22~65 years). 4
were benign and 10 were malignant tumors. All of them were unilateral affected.11 cases of nerve
grafting were done immediately after the tumor dissection. 2 cases were done 6 months after tumor
operation and one case was 9 months. The facial nerve affected included 6 cases in the main trunk, 4
cases in the cervical division, one was in the zygomatic branch and one was in the zygomatic branch
and temporal branch. The great auricular nerve in the same side of the tumor was harvested for nerve
grafting except both sides were used in one case. These patients were followed up from half a year to 5
years, until they were recovered or no obvious recovery was observed in half a years.Neurotrophic
drugs and neuromuscular facial retraining were both given post operation. House-Brackmann grading
scale, electroneurography and whether the patient was satisfied with the operations were applied to
analyze the results of the operation.
Results: Except for one patient recurred one year after operation,10 cases which were treated at the
same time with tumor dissection recovered to HB grade I to II. All 10 patients were satisfied with the
results of operation. 7 cases hadfacial spasm in the tumor side.2 patients had no recovery in lifting
eyebrow. Electroneurography showed the amplitudes in the grafting sides are all lower than the normal
side. Only 1 of the 3 cases which were treated more than half a year later recovered to HB grading II,
the other 2 have no recovery in facial nerve movement and electroneurography showed no signal..
Conclusion: The great auricular nerve grafting is an effective method in the treatment of facial nerve
defect in parotidectomy. A great part of facial nerve function will be preserved after operation. Facial
plasmis a common complication. Instant operation will get a much better result than secondary
operation.
Key words: Parotid tumor; Facial palsy; Great auricular nerve Nerve grafting
2014 Xi’an Conference
121
6
Effects of Aqueous Areca Nut Extract on The Level of Endothelin-1 Secreted by Endothelial Cells
Pang Danlin, PengJieying, YinXiaomin, WuYingfang, Li Ming
Xiang YaStomatological Hospital Central South University
Purpose: To assess the possibility of endothelial cells (EC) and endothelial cells-1(ET-1) in the process
of oral submucous fibrosis(OSF) by observing the direct effect of aqueous areca nut extract
(AANE) on the level of ET-1 secreted by EC.
Methods: EC (from ECV-304) were cultured in vitro. EC were incubated together with AANE of
different concentration:0、50、100、200、400、600、800 ug/ml, and after 48 hours we investigated
the level of ET-1.
Results: The level of ET-1 secreted by EC was increased when EC were affected by AANE of
concentation at 100 ug/ml or more for 48 hours,and positive comelations were found between intensity
of increasing agents and the dosage.
Conclusion: AANE of some concentration could play an important role in the process of OSF through
making the content of ET-1 increase by injuring EC.
Keywords: Queous areca nut extract; Oralsubmucousfibrosis; Vascularendothelial cell; Endothelin
7
Morindacitrofolia Enhances Bone Marrow Mesenchymal Stem Cell Proliferation and Facilitates Osteogenesis
Sharmila Hussain, Ramasamy Tamizhselvi, Leema George
1.Department of Prosthodontics, Saveetha dental college and hospital, Chennai, Tamilnadu. India
2 . School of BioSciences and Technology, Vellore institute of technology, Tamilnadu. India
Purpose: Morindacitrifolia(Noni), an important traditional medicinal plant used in patients with bone
fractures or dislocation to promote connective tissue repair and to reduce inflammation. However, the
influence of Morindacitrifolia on osteogenic differentiation is yet to be clarified. The objective of this
study is to evaluate the effect of Noni juice (NJ) on the proliferation rate of bone marrow mesenchymal
stem cells (MSC), the differentiation of marrow mesenchymal stem cells into osteoblasts
(osteoblastogenesis) and the level of mineralization.
Methods: The rat bone marrow-derived MSC were isolated and cultured in media with or without TNJ
(Morindacitrifolia)and their osteogenic differentiation was evaluated by their alkaline phosphatase
(ALP) activities and level of mineralization. MSC cultures in control media and media supplemented
with Noni juice were also subjected to a cell proliferation assay (MTT).
Results: Runt-related transcription 2 (RUNX2) mRNA expression was examined by RT-PCR. The
addition of NJ to undifferentiated MSC increased their proliferation rate significantly in comparison
with that of cells grown in basal media alone.
Conclusion: MSCs grown in basal media and supplemented with NJ differentiated into osteoblasts, as
identified by ALP activity and increased bone mineralization. Furthermore, RUNX2 mRNA expression
was observed in MSC supplemented with NJ. Our study demonstrated that the TNJ could increase bone
regeneration and may become very useful in the rapidly advancing field of regenerativemedicine
2014 Xi’an Conference
122
8
Evaluation of a Critical Size Calvarial Defect in the SAMP6 Steoporosis Mouse Model
Yufeng Zhang, Lu Wang, Feng Deng, Hongmei Qiu, Xiaohong Wu
Department of Prosthodontics, the Affiliated Hospital of tomatology, Chongqing Medical University
Purpose: To establish a calvarial defect model in mice with senescence-accelerated osteoporosis and
evaluate differences in the spontaneous healing capacity between senescence-prone inbred strains
(SAMP6) and senescence-resistant inbred strains (SAMR1) in order to determine the critical size defect
in the cranium of this animal model.
Methods: Unilateral full-thickness calvarial defects of 2 or 4 mm in diameter were made in 6-month-
old male SAMP6 and SAMR1 mice (n=6 per size). The local repair process was monitored in vivo by
high-resolution micro-CT scanning at day 0 and 6 and 12 weeks postoperatively. After the final micro-
CT scan, mice were sacrificed, and calvarial specimens were collected for histological examination by
hematoxylin and eosin staining and histochemical staining with Masson’s trichrome and tartrate-
resistant acid phosphatase (TRAP) staining to identify the content of healing tissue and osteoclast
activity within the defect, respectively.
Results: In vivo micro-CT analysis revealed that a significantly smaller percentage of new bone
formation was observed in defects in SAMP6 mice compared to SAMR1 mice at 12 weeks post surgery,
with <5% healing in SAMP6 mice for both 2- and 4-mm defects compared >5% healing in 2-mm
defects in SAMRI mice (p<0.05). Still, the mean percentages of healing within the calvarial defects in
both SAMP6 and SAMR1 mice were less than 10%. Histological analysis revealed a dense connective
tissue layer but little bone healing in 2- and 4-mm defects in SAMP6 and 4-mm defects in SAMR1
mice. In contrast, newly formed bone was observed at the periphery of the 2-mm defects in SAMR1
mice. Masson’s trichrome staining also supported these findings. In addition, more enlarged osteoblasts
were detected at the periphery of defects in SAMR1 mice, and even though no obvious TRAP-positive
cells were found at the margins of any defects, more TRAP-positive cells were seen in the diploë of
contralateral cranial bone in SAMP6 mice than in that of SAMR1 mice.
Conclusion: A 2-mm defect was found to be a critical size defect in the cranium in both SAMP6 and
SAMR1 mice. Intramembranous ossification of the defect was impaired in SAMP6 mice, likely due to
the combined effects of osteoblast insufficiency and excessive osteoclastogenesis.
9
Fabrication and Cell Compatibility Evaluation of Pure Titanium Coated with Sustained Release System of BMP-2/ Biomimetic Calcium Phosphate
Zhipei Chen,Xiaojing Zhu, Hui Zhang, Chengyun Nin, Yan Wang*(corresponding author)
Guanghua School of Stomatology, Sun Yat-sen University
Purpose: To fabricate sustained release delivery system of bone morphogenetic protein (BMP-2) /
biomimetic calcium phosphate coating on titanium surface, explore the effects of BMP-2 concentration
on the loading and release behavior of BMP-2 and evaluate cell compatibility of the system in vitro.
Methods: 0.1mm thickness of pure titanium (Ti) specimens were immersed into sterile SBF solution
for 4d at 37℃ and then rinsed with deionized water and air dried overnight at 37℃. The coated
specimens were then randomly divided into five groups and immersed in supersaturated calcium
phosphate solutions (SCP) which contained five concentrations of BMP-2 (0, 50, 100, 200 and
400ng/mL) for 2d at 37℃ to fabricate calcium phosphate coatings loaded with BMP-2. The topography
of the specimen was observed by scanning electron microscopy. Chemical structure and phase
composition of coatings were detected by Fourier infrared spectroscopy analysis and X-ray diffraction
respectively. The amount of incorporated BMP-2 and its release profile were determined by BMP-2
2014 Xi’an Conference
123
enzyme linked immunosorbent assay kit. Cell biocompatibility was assessed by observing MC3T3-E1
morphology by SEM, detecting the proliferation and differentiation ability by CCK-8 kit and alkaline
phosphatase kit .
Results: 1.The inclusion of BMP-2 did not change the surface topography and phase composition of
the codeposited coatings regardless of BMP-2 concentration in supersaturated calcium phosphate
solution. All the coatings were composed of plate-like units of hydroxyapatite and octacalcium
phosphate crystals. The loading amount of BMP-2 in the calcium phosphate coatings increased
accordingly with the increase of BMP-2 concentration in supersaturated calcium phosphate solution.
The in vitro release test showed that all the release profiles of BMP-2 of the 4 various concentrations
could be divided into two stages- -burst release stage and sustained release stage, with about
(51.46±1.4)%, (45.98±4.0)%, (38.25±5.2)%, (28.91±1.3)% BMP-2 release in 24hours respectively, and
(72.52±2.1)%, (76.72±1.26)%, (62.83±1.27)%, (49.14±1.5)% BMP-2 release in 20 days respectively.
BMP-2 was continuously released in a sustained manner.2. BMP-2 /calcium phosphate coatings were
more favorable for cell adhesion. Both cell proliferation and differentiation ability showed a
concentration - and time-dependent manner. The highest cell density and differentiation ability were
found on coating fabricated with BMP-2 concentration of 400ng/mL .
Conclusion: 1.BMP-2 incorporated inside the BMP-2/ biomimetic calcium phosphate is released in a
sustained manner. Favorable BMP-2 incorporation rate and release model can be obtained at the
concentration of 400ng/mL.2.The hybrid coating of BMP 2/calcium phosphate can significantly
promote the proliferation and differentiation ability of MC3T3-E1 on the surface of titanium. The 400
ng/mL BMP- 2 group showes the optimal cell compatibility in vitro.
Key words: Pure titanium; Calcium phosphate coating; Bone morphogenetic protein 2; Sustained
-release; Cell compatibility
10
Electrophoretic Deposition of Amoxicillin Silk Fibroin Coatings for Functionalization of Titanium Surfaces
Zhen Zhang, Xian Cheng, Xiaoshuang Li, Lili Chen
Union Hospital, Tongji Medical College, Huazhong University of Science and Technology
Purpose: To investigate the function and mechanism of the amoxicillin loaded silk fibroin coating
Methods: The prepared coatings were characterized using fluorescence microscopy, scanning electron
microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, shear bond strength testing and
antibiotic test.
Results: The characterization of the obtained coatings indicated that the intermolecular hydrogen
bonds formed between the backbone of silk fibroin and amoxicillin molecular. The amoxicillin loaded
coating showed remarkable antibacterial activity against gram-positive (Staphylococcus aureus) and
gram-negative (Escherichia coli) bacteria.
Conclusion: Electrophoretic deposition was an effective and efficient technique to prepare amoxicillin
loaded silk fibroin coatings on the titanium surface and that the coatings with antibacterial property
were promising candidates for further loading of functional agents.
Key words: Electrophoretic deposition; Silk fibroin; Amoxicillin.
2014 Xi’an Conference
124
11
Effects of Acellular Dermis Matrix for The Prevention of Gustatory Sweating Syndrome After Parotidectomy: A Systematic Review Based on Randomized Controlled Trials
Gou Liming, Li Chunjie, Li Longjiang
Department of Head and Neck Oncology, West China Hospital of Stomatology, Sichuan University
Objectives: To assess the efficacy and safety of acellular dermix matrix for the prevention of gustatory
sweating syndrome after parotidectomy.
Methods: Medline, CENTRAL, EMBASE, OPEN SIGLE, CBM, VIP, CNK and Wanfang database
were searched electronically on March 17th 2013. Hand-searching covering 19 relevant Chinese
journals were also performed. Risk of bias assessment, which was suggested by Cochrane handbook for
systematic reviewers of intervention review, and data extraction of included studies were delivered by
two reviewers in duplicate. Meta-analysis was done with Revman5.2 and STATA 11, and the quality of
evidence was evaluated by GRADE.
Results: 16 randomized controlled trials involving 1097 participants were included and 1 included
studies had high risk of bias and the rest had unclear risk of bias.. Meta-regression showed the variables
related to the clincial heterogeneity did not influence the outcome (P>0.10). Begg test showed there
was no publication bias (P=0.350). The meta-analysis showed that for objective assessment, acellular
dermis matrix implantation could reduce 82% of the gustatory sweating syndrome (P<0.00001) which
had the strongest clincial recommendation. For subjective assessment, acellular dermis matrix could
reduce 89% of the incidence of gustatory sweating (P<0.00001). When comparing acellular dermix
matrix, there was no difference between acelluar dermix matrix with tissue flaps (P=0.70). No serious
adverse events were reported.
Conclusion: There is significant effect and safety of acellular dermix matrix for prevention of
gustatory sweating syndrome after parotidectomy and had a strong clincal recommendation. But more
high-quality RCTs were needed to increase the reliability.
12
The Effect on Induced Pluripotent Stem Cell of The Extract of Akermanite in Vitro
Dong Xixi, Du Qinghua, Wei Lijun, E Lingling, Cao Junkai
Department of Stomatology, Chinese PLA General Hospital.
Purpose: To assess the ability of iPS cells to differentiate into bone in vitro.
Methods: Use the different diluted rate extract to induce ipsc, MTT analysis were used to reveal the
proliferation. Expression level of osteogenic differentiation genes(ALP、BSP、OCN) were examined
at 7、14 and 21 days.
Results: 1/2 extract has the better efficiency in osteogenic differentiation.
Conclusion: The exract of Akermanite has the ability to induce ipsc into bone, and ipsc with its
scaffolds have a great potential in application in engineered bone.
Key words: Induced pluripotent stem cell; Bioactive ceramics; Akermanite; Tissue engineering;
2014 Xi’an Conference
125
13
Comparision of The Effects of Different Occlusal Reconstruction on Partial Mandibular Bone Defect Patients
Li Yanan, Guo Guihua, Shi Xiaowei, Li Hongmei, Gong Qiwei, Liu Hongchen
Department of Stomatology, Chinese PLA General Hospital
Purpose: To explore and compare the effects of occlusal reconstruction with removable prosthesis and
fixed prosthesis on partial mandibular bone defect patients..
Methods: 41 patients with partial mandibular bone defect and 1-2 molar or premolar lost were divided
into two groups, 24 were repaired with removable prosthesis, and 15 were repaired with fixed
prosthesis. Their feelings (esthetic feeling, comfort), clinical symptoms, masticatory efficiency and
temporomandibular joint disease symptoms (TMJDS) were observed and analyzed before and after
occlusal reconstruction..
Results: The patients were all satisfied with their prosthesis. Their clinical symptoms, masticatory
efficiency were improved. Statistical analysis showed the significant differences before and after
occlusal reconstruction (P<0.01). The fixed prosthesis had better effects than the removable prosthesis
(p<0.05)on patients’ feeling and masticatory efficiency. No patient showed TMJDS after occlusal
reconstruction in either group.
Conclusion: Both removable prosthetic and fixed prosthetic occlusal reconstruction were effective to
improve the partial mandibular bone defect patients’ oral and occlusal function. The fixed prosthesis
has better effect on esthetics, feeling, comfort and masticatory efficiency.
Key words: Partial mandibular bone defect; Occlusal reconstruction; Removable prosthesis; Fixed
prosthesis
14
IL-22 Mediates Oral Mucosal Wound Healing Via STAT3
Ding Yumei, Yu ran, Zhu Lijuan, Zhang Chenguang, Chen Lili
Union Hospital, Tongji Medical College, Huazhong University of Science and Technology
Purpose: To investigate the function and mechanism of IL-22 during oral mucosal wound healing
Methods: Expression level of IL-22 and STAT3 were investigated via a mice tongue wound model in
vivo, and in vitro study was checked with Real-time PCR, Western blotting and proliferation assays in
keratinocytes and fibroblast.
Results: The results showed that IL-22 and p-stat3 were associated with oral mucosa wound healing,
and STAT3 was activated when the keratinocytes and the tongue tissue were stimulated by IL-22. But
fibroblasts showed negative result.
Conclusion: In summary, our study suggests that IL-22 can promote the oral mucosa wound healing
via STA3 in keratinocytes.
Key words: IL-22; STAT3; keratinocyte
2014 Xi’an Conference
126
15
Cell-bricks Based in Jectable Niche Guided Persistent Ectopic Chondrogenesis of BMSCs and Enabled Nasal Augmentation
Ba Ruikai, Li Man, Wu Wei , Zhao Yimin
Department of Prosthetics, School of Stomatology, The Fourth Military Medical University
Purpose: Developing cartilage construct with injectability, appropriate matrix composition and
persistent cartilaginous phenotype remains an enduring challenge in cartilage repair. Bone marrow
derived mesenchymal stem cells (BMSCs) presented chondrogenic potential. Current approaches to
drive their chondrogenic differentiation require extensive cell manipulation ex vivo and using
exogenous growth factors. However, preventing hypertrophic transition of BMSCs in vivo and
maintaining persistent chondrogenesis remain bottlenecks in clinical application. This study aimed to
develop completely biological, injectable construct to generate cartilage by co-transplanting
chondrocyte and BMSCs.
Methods: Chondrocytes isolated from 1-month old rabbit’s auricular cartilage were cultured to form
cell bricks and cell expension for 10 days while BMSCs from the same donor were expanded for
seeding. 48 nude mouse were divided evenly(n=6) into BMSCs-PRP(B-P), BMSCs-chondrocytes-
PRP(B-C-P),BMSCs-cell bricks-PRP(B-CB-P)groups for1month and 3months achievement. BMSCs,
cell bricks, BMSCs/chondrocytes mixture or BMSCs/cell bricks mixture were suspended in PRP and
were subcutaneously injected into animals..
Results: Best cartilage formation was achieved in B-CB-P group after 3months,confirmed by safranin
O staining, and collagen type II immunostaining. Hypertrophy and ossification appeared in B-P and B-
C-P, confirmed by collagen type X immunostaining ,collagen type I immunostaining and Masson's
trichromestaining. Immunofluorescencestaining of BrdU
(5-Bromo-2-deoxyUridine) labeling BMSCs confirmed that new-born chondrocytes originated in
BMSCs we injected. Statistical differences could also be found among four groups in terms of gene and
protein expression. We used the complex of B-CB-P to construct a new nose for nude mouse and
observed for 12 weeks, finding it stable in morphology.
Conclusion: We concluded that cell bricks-enriched PRP clot provide autologous substance derived
niche for chondrogenic differentiation of BMSCs in vivo, which suggests that such an injectable,
completely biological system is a suitable stem cell carrier for micro-invasive cartilage repair
Key words: Cell bricks; Chondrogenesis; Bone marrow stromal cell; Hypertrophy; Nasal
augmentation
Session IV – Miscellaneous topics in Maxillofacial Rehabilitation
1 Effect of Thixotropic Agent on Physical Properties of Facial Silicone Elastomer
Abdel Raheem Bibars, Zied Alhourani
Jordan University of Science and Technology
Purpose: The aim of this study was to investigate the effect of viscosity modifiers on the mechanical
properties of silicone elastomers
Methods: One hundred twenty dumbbell-shaped and trouser-shaped specimens were produced using
2014 Xi’an Conference
127
combinations of cosmosil M511 part A, part B and colorants (1 drop/5gm). Trouser-shaped specimens
will be used to evaluate the tear strength of the maxillofacial material. While dumbbell-shaped
specimens were utilized to evaluate the tensile strength and the elongation percentage.
Results: The group of silicone without thixotropic agent had a significant higher tear strength than that
of silicone with added thixotropic agent (P<0.05). Overall there were no significant differences in the
mean tensile strengths between the two groups silicone without added thixotropic and the group added
thixotropic agent (P=0.4). The elongation at break for the two groups showed that the group of silicone
added thixotropic agent had a significantly lower elongation at break in comparison to the other
materials (P<0.001).
Conclusion: Within the limitations of this study, it can be concluded that adding thixotropic agent to
the silicone during mixing can lead to lower tear strength and elongation percentage.
Key words: Thixotropic agent; Thickening agent; Maxillofacial silicone; Tear strength; Tensile
strength
2
Conventional Prosthodontic Management with Attachment-retained Overdenture in Ⅱ Class Defects of Maxilla Patients
Bai Bing,Zhu Jingtao,Ai Hongjun
Department of Prosthodontics, School of Stomatology, China Medical University
Purpose: The aim of the study was to evaluate the effect of ball cap attachment-retained maxillofacial
rehabilitation prothesis for the Ⅱ class defects of maxilla.
Methods: We make Maxillofacial Rehabilitation prothesis for 10 patients with ball cap attachment. We
choose the teeth which near the defect as the abutments of ball cap attachment. After root canal therapy
of these teeth, we made ball cap attachment on them. After 1 week of the prothesis of Ⅱ class defects
of maxilla patients, we fixed the cap. The Patient’s Satisfaction (PS), Speech Intelligibility (SI) and
Masticatory Efficiency (ME) were investigated before and 1, 3, 6 and 12 months after the fix of the cap.
The ME test was performed with optical, an artificial test food.
Results: The PS of all prothesis was excellent; 2 of them need to be relined. The SI of patients was
significantly enhanced as soon as the prothesis were done. Speech of all patients made great progress
after the treatment. The ME was higher in patients with ball cap attachment after treatment than before.
The ME was near 20-30% before treatment, and the ME were near 40-50% after treatment.
Conclusion: Ball cap attachment has an effect to improve the quality of patient’s oral prothesis. The
ball cap attachment improved the quality of patient’s life.
Key words: Ball cap attachment; Maxillofacial Rehabilitation; Ⅱ class defects of maxilla
3
Yu’s Flap For Lower Lip and Reverse Yu’s Flap for Upper Lip Reconstruction: 20 years experience
Sun ChangFu
Hospital of Stomatology, China Medical University
Purpose: The aim of this study is to report our experience of the Yu’s flaps, and we hope it will be
helpful to other surgeons.
Methods: In our department between January 1992 and December 2012, 8 patients had reverse Yu
flaps for the reconstruction of upper lip defects and 56patients had classic Yu flaps for lower lip defects.
2014 Xi’an Conference
128
Patients with defects located laterally to the upper lips, ranging from 1⁄3 to ½, had unilateral reverse Yu
flaps, and bilateral procedures were done for defects of less than 2⁄3 of the lips. However, if the defects
were located in the centre of the upper lips, between 1⁄3 and ½, they were treated with bilateral reverse
Yu flaps. Patients with defects between1⁄3 and 2⁄3 of lower lips had unilateral Yu flaps, and if the
defects were wider than 2⁄3 of the lower lips, the procedure was bilateral.
Results: No flap failed and desirable functional and aesthetic outcomes were recorded in all cases.
Conclusion: The Yu technique can be used as a one-stage procedure to close defects up to all the lower
lips and 2⁄3 of the upper lips.
Key words: Lip defects; Yu’s flap; Lip reconstruction; Combined rotation and advancement flap
4
The Total Lower Lip Reconstruction after Squamous Cell Carcinoma Resection
Chen Qiang, Xu Yang
Department of Oral and Maxillofacial Surgery, School of Stomatology of Jilin University
Purpose: To assess the effectiveness of local flaps for total lower lip reconstructions. To preserve oral
function and achieve acceptable cosmetic results. To certify the two-stage operation is deserved.
Methods: We applied two-stage operation in a patient with total lower lip defect following excision of
squamous cell carcinoma. Total lower lip reconstruction was performed in two operations. The first
operation method is local Upper lip pedicle flap and two advancement flaps. After first operation, we
just restored a large part function. Such as, oral competence, muscle function, lips sensation. The
disadvantage is microstomia, so subsequent corrective surgery is required. The second operation is
restore the oral gape .
Results: After first operation, we restored a large part function. Such as, oral competence, muscle
function, lip sensation. The disadvantage is microstomia. After the second operation, we restored the
oral gape. After two operations, the functional and aesthetic outcomes are satisfactory on follow-up,
with normal lip movement and sensation, adequate mouth opening, good colour and texture match with
adjacent tissues, and excellent volume and quality of the vermillion. No recurrence has been noted 6
months after lower lip excision.
Conclusion: Effective reconstruction of the lower lip must not only restore the shape but also preserve
the function of the lip. So lower lip reconstruction aims to restore function and appearance with the best
results, ideal lip reconstruction should maintain sphincter function, not leak fluid between the upper
and lower vermillions, obtain sufficient mouth space, and have an acceptable aesthetic appearance.
With the total defects, reconstruction is less than optimal, but every effort should be taken to obtain an
adequate sphincter function and lip continence to saliva, both of which are the most important goals to
achieve in lip reconstruction.
This technique is simple and achieves the main goals of total lower lip reconstruction in a single stage
with minimal morbidity. What is more, no recurrence has been noted 6 months after lower lip excision.
Key words: Lower lip; Reconstruction
2014 Xi’an Conference
129
5
Application of Retentive Techniques in The Restoration of Maxillary Defects
Liu Yang, Leng Yong
Dalian Stomatological Hospital
Purpose: To investigate the effect of several retentive techniques in the restoration of maxillary defects.
Methods: Four cases were included: 2 females and 2 males who visited the Prosthodontics department
of Dalian Stomatological Hospital from Dec 2009 to Jun 2011. Their ages ranged from 59-76 with
average 67.5 years old. According to Zhao Yinmin’s classification to maxillary defects : one ClassⅠmaxillary defect with defect of hard palate. Two ClassⅤmaxillary defect with defects of one half of
dentulous maxillary. One Class Ⅶ5 maxillary defect with defect of one half of edentulous maxillary .
Hollow maxillary prostheses were designed and issued to the four patients. In Class I case framework
prosthesis with 3 clasps combined with soft reliner obturator were designed. In class Ⅴ cases
framework prostheses with clasps combined with ERA attachments were designed. Abutment teeth
near the defects were protected with connected crowns. In class Ⅶ5 case root magnetic attachments
were designed . The whole clinic processing was operated by the same specialist from design to
prostheses issue and adjustment.
Response Evaluation Criteria: according to the evaluation criteria proposed by Zhao Yimin and other
scholars: ① Excellent: intact prosthesis; prosthesis are in good stability, restore the patient's
pronunciation and appearance, restore chewing function partially, no inhaled drinking and abutment
tooth mobility. ②Good: intact prosthesis; prosthesis are in accepted stability, partially restored patient's
above function and appearance; no inhaled drinking and abutment tooth mobility exist.③Poor: Any of
the following one: damaged prosthesis or fracture of the clasps; prosthesis are in bad stability; cannot
effectively restore above function and appearance; tooth loosening due to prosthesis.
Results: Four cases restored with hollow maxillary prostheses have got excellent clinic effects. In class
I case patient’s facial appearance has no change after restoration. In the other three cases patient’ facial
appearance improved greatly .The four prostheses have no damage after two-years with good retention
and reliable stability. Patients’ masticatory function was restored partially as well as phonetic function
and facial appearance. No inhaled drinking and abutment teeth mobility happened. Mental states of the
patients have improved a lot with increased confidence.
Conclusion: Reasonable retention design is one of the key steps in the restoration of maxillofacial
prosthetics. Prosthetic treatment in maxillary defects is a relatively faster, cheaper and more convenient
method which can significantly improve the function of mastication, pronunciation and are easily
accepted by patients.
Key words: Maxillary defect; Prosthesis; Retention.
6
A Study of Computer Color Matching of Silicone Elastomer Based on Artificial Neural Networks
Fang Su
Dental Institute
306 Hospital of Chinese PLA, Beijing 100101, China
Maxillofacial Prosthetics as the special area of dental practice, which restore the orofacial defects with
maxillofacial material to rehabilitate the patients appearance and function that is an ancient art. Color
selection and color matching is the key to success in the maxillofacial restorations. The color difference
between the facial prosthesis and surrounding skin has long puzzled both of dentist and patient. The
color matching of the restoration is a complex process, and now the dentists who select and evaluate
the color of skin and restoration depend on perceptional method. The perceptional method relies on
2014 Xi’an Conference
130
color perception by human eyes, which is affected by many factors: surrounding light condition, size of
objective, background and eye fatigue. The purpose of this study is to introduce CCM technology into
the color matching of maxillofacial restorations and set up a set of equations to increase the accuracy of
color matching.
Computer Colorant Formulation has been implemented using a theory of radiation transfer known as
Kubelka-Munk (K-M) theory. Oil paint matching as some other paints needs to use the two-constant K-
M model if we take a computer color matching method based on the K-M theory. However, some
assumptions have to be met when we use the model, so the application of two-constant K-M model is
restricted a lot. In this study, avoiding using the complicated optical assumption, the artificial neural
networks (ANNs) was introduced to the research of color matching of maxillofacial restoration because
of its advantage in solving the problem of nonlinear mapping between color space and recipes space.
The results of the study are as follow:1.According to the research of Structure of Networks, a multi-
layer BP neural network model is made to predict the recipes of oil paints in this study. 2.The
experiment shows that the multi-layer BP neural networks model could Implement the prediction well
between CIE-XYZ color space and recipes space. The results suggest that all the errors distribute at a
low level. Almost all of the color difference is under 1.5. The result is content to meet clinical
requirements of color matching of maxillofacial restoration.
Key words: Silicone elastomer; Computer color matching; Artificial neural networks
7
Clinical Trial of Novel Silicone Materials for Facial Prostheses
Fumi YOSHIOKA, Shogo OZAWA, Maiko, Manami, Kohei, Yoshinobu
Aichi Gakuin University, School of Dentistry, Removable Prosthodontics
Purpose: A project of developing novel silicone materials is proceeding by the cooperation of Japanese
Academy of Maxillofacial Prosthetics and GC Company, Japan. We have tested basic properties of trial
prosthetic silicone materials and revealed that they have comparable properties with the existing
silicone material. The aims of this study are to access color stability of the silicone materials, and to
compare two kinds of silicone materials in terms of color changes and patients preferences.
Methods: Silicone samples were fabricated using two kinds of silicone; novel silicone developed by
GC and existing materials manufactured by Factor II. The samples including pigments and nylon
flocking were exposed artificial ultraviolet light, and evaluated color changes by spectrophotometer.
Moreover, clinical trial was conducted and twelve patients who were treated in Maxillofacial
Prosthodontic Clinic, Aichi Gakuin University Dental Hospital were enrolled in this study. Eight weeks
after the delivery of two facial prostheses, patient preference was surveyed by questionnaire.
Results: The color changes on the CIE Lab values revealed that Hue and Chroma showed significant
differences between before and after the exposure rather than brightness in both materials. The samples
including nylon flocking were more affected by ultraviolet exposure than the samples with pigments
only. Results of the questionnaire demonstrate that impression of usage and subjective evaluation were
different between two materials although color change did not show significant differences. Patient
preferred facial prostheses made of novel silicone materials in terms of materials properties and feeling
of wear.
Conclusion: Novel silicone material has similar material property and color stability as compared to
the existing material. Clinical trial of this material showed favorable patient acceptance. This project
was supported by cooperation of Japanese Academy of Maxillofacial Prosthetics and GC Company,
Japan.
Key words: Silicone material; Facial Prosthesis; Clinical Trial; Changes
2014 Xi’an Conference
131
8
Application of Vacuum Sealing Drainage (VSD) in Maxillofacial Complex Wound
Gao Jianyong
Department of Stomatology, Changhai Hospital, Second Military Medical University, Shanghai
Purpose: To explore the methods and clinical value of vacuum sealing drainage in the treatment of
complex maxillofacial and neck wound infection , effusion and internal and external fistula after the
oral cancer radical and reconstruction operation.
Methods: Collect these numbers below in our department. Between January 2008 to January 2011,
there was 8 cases with wounds effusion and split, and 5 cases with internal and external fistula under
the jaw and neck after the oral cancer radical + free flap defect repair, statistics the average time of
healing the wound by using the conventional treatment. Between January 2011 to January 2014 , there
was 9 cases with wounds effusion and split ,and 6 cases with internal and external fistula under the jaw
and neck after the oral cancer radical + free flap defect repair, statistics the average time of healing the
wound by using vacuum sealing drainage.
Results: The average time of healing the effusion and cracking wounds was 16 days by using the
conventional treatment, but internal and external fistula in mouth was 24 days. And the average time of
healing the effusion and cracking wounds was 12 days and the internal and external fistula in mouth
was 19 days by using vacuum sealing drainage . The time were significantly shortened to 4 days (25%)
and 5 days(21%).
Conclusion: The VSD not only can drainage thoroughly, keep the wound clean and then prevent
infection, but also narrow the wound, eliminate the dead space, stimulate the growth of granulation
tissue rapidly, promote wound healing and shorten the time of repairing. In the treatment of the
complicated postoperative wound’s repair after oral cancer radical, vacuum sealing drainagecan
improve the clinical therapeutic effect, shorten the time of living in the hospital, relieve patients’ pain,
reduce the times of using the antibiotics, and it is an effective method for the treatment of maxillofacial
and neck complicated wound .
Key words: VSD; Maxillofacial complex wound
9
Chimeric Flaps Pedicled with Lateral Circumflex Femoral Vessel for Individualized Reconstruction of Through-and-through Oral and Maxillofacial Defects
Gong Zhaojian
The Second XiangyaHospital, Central South University
Purpose: To evaluate the feasibility and reconstructive efficacy of chimeric flaps pedicled with lateral
circumflex femoral vessel (LCFV) for the reconstruction of through-and-through oral and maxillofacial
defects.
Methods: A retrospective review was performed of 41 patients who underwent reconstruction of
through-and-through oral and maxillofacial defects with chimeric flaps pedicled with LCFV from
January 2009 through December 2012 in the Second Xiangya Hospital. The methods of chimeric flaps
design and defects reconstruction, as well as reconstructive efficacy, are reported.
Results: Of the 41 chimeric flaps, 29 were chimeric anterolateral thigh (ALT) and ALT flaps, 12 were
chimeric ALT and anteromedial thigh flaps, with flap sizes ranging from 5 cm × 8 cm to 9 cm × 11 cm.
The chimeric flaps provided separated flaps to reconstruct the intraoral mucosa and extraoral skin
defects. Forty of 41 cases of chimeric flaps survived completely, providing a success rate of 97.6 per
cent. All patients were followed for approximately 6 to 48 months, and they were satisfied with the
2014 Xi’an Conference
132
aesthetic and functional results of the donor and recipient sites after the reconstruction.
Conclusion: Chimeric flaps pedicled with LCFV are a good choice for the reconstruction of through-
and-through oral and maxillofacial defects.
Key words: Lateral circumflex femoral vessel; Chimeric flaps; Oral and maxillofacial region; Defect
10
Application of PFM Crowning Techniques To Restore Multiple Adult Stuck Teeth with Large Scattered Clearance
Guo Ling, Li Wangyang , Huang Yao
Stomatology Hospital Affiliated to Luzhou Medical College
Purpose: The purpose of this presentation is to present the results of applying PFM crowning
techniques to restore multiple adult stuck teeth with largely scattered clearance.
Methods: Lack of permanent tooth germ would result in multiple adult anterior teeth stranded and
wide gaps with canine crossbite. The approach adopted to restore these stuck teeth includes three steps:
1: Correct the malocclusion by orthodontic treatment,2: Apply PFM bridge to restore maxillary teeth 3:
Apply union crown to restore deciduous teeth due to short root and wide gaps.
Results: Multiple wide scattered clearances were corrected successfully in a short period. The
deciduous tooth was kept while the gaps were closed at the same time. The function of aesthetics and
language were fully restored.
Conclusion: The combination of orthodontic treatment with restoratory treatment can be effectively
used to restore the teeth with large gap and multiple teeth stranded. It has the advantages of keeping
the deciduous tooth while closing the gaps and fully restoring the aesthetics and language.
11
Experience of Clinical Details in Restoration for Unilateral Maxillary Defect with Maxillary Obturator
Yang Huochuan, Qiu Xingchun, Li Yan
Guanghua School of Stomatology, Hospital of Stomatology, Sun Yat-sen
Purpose: The difficulties of clinical operation in restoration for maxillofacial defect with prostheses
enlarge as the complexity of defect increase. This article summarized the experience of clinical details
in a case which restoring unilateral maxillary defect with maxillary obturator.
Methods: 6 months after the resection of partial maxillary bone, the patient(18-year-old,female)with unilateral maxillary defect, was rehabilitated with an maxillary obturator. We made the best of
every undercut buccally or lingually by designing the clasps appropriately. The protection of the
abutment teeth was also considered the occlusal force putting on the prostheses. In this case, linked
crowns were used for protection of the further damage in the alveolar bone of the abutment teeth. As a
result of tissue defect in the palate, chokes coughs usually occur during teeth preparations which
increase the difficulty of clinical operation. In this case, rubber dam was used and patient felt much
more comfortable during the treatment.
Results: As a result of this appliance, the masticatory function was improved and pronunciation was
much clearer. The retention and stability of the prostheses were good while the aesthetic result was
satisfactory.
Conclusion: Attention to the clinical details was very important in restoring unilateral maxillary defect
with maxillary obturator successfully.
2014 Xi’an Conference
133
Key words: Maxillofacial defect; Obturator; Restoration
12
Genetic Investigation of Bisphosphonate-Related Osteonecrosis of Jaw (BRONJ) via Whole Exome Sequencing and Bioinformatics
Jee Hwan Kim , Yong Jae Ko, Jae Hoon Lee, Jin Kim, Ji Hyun Lee, Dong Hoo Han
Department of Prosthodontics, Yonsei University
Purpose: Bisphosphonate-related osteonecrosis of jaw (BRONJ) is one of the complications linked to
the consumption of BP. Not all patients prescribed with BP experience BRONJ and it is multigenic
disease possibly affected by both environmental and genetic factors. The purpose of this study is to
discover genetic biomarkers associated with BRONJ via WES followed by statistical analysis and
protein functional network study.
Methods: 16 individuals who have been diagnosed with BRONJ were chosen and each individual’s
saliva sample was collected by OG-500 (DNA Genotek, Ottawa, Ontario, Canada) for whole exome
sequencing (WES) (Agilent SureSelect Human All Exon 50 Mb kits). Saliva sample was taken for
massive sequencing and SnpEff, 1000 genomes project East Asian population, 126 healthy Korean
randomized subsample originally recruited for thyroid cancer (GSK project), and Polyphen were used
to filter out common variants from 16 individuals’ whole exome sequencing data. Common variants
with minor allele frequencies (MAF) >= 0.05 from all control datasets were eliminated and different
impacts (high, moderate and loss of function) were used for comparison. Bioinformatics study by gene
set enrichment analysis (GSEA) and network analysis was done to detect various genes and gene sets
associated with BRONJ.
Results: Total of 118,856 variants were detected and 2,180 which is equivalent to 1,866 genes was
recovered after the filtering step. Bioinformatics study revealed possible gene sets related to risk of
developing BRONJ. Domains including, cell adhesion, cadherin, laminin/lectin, actin cytoskeleton,
fibronectin and extracellular matrix were distinctive from GSEA. The protein functional network study
composed of terms related to cell adhesion, cell morphology and apoptosis. Known genes associated to
BRONJ from previous studies have been tested for presence in current study and only RBMS3 was
detected from current study.
Conclusion: Our results suggest that various genes and gene sets involved in cell adhesion,
morphology and apoptosis take pivotal role in developing BRONJ in patients with Bisphosphonate
medication history.
Key words: Bisphosphonate; BRONJ; Whole Exome Sequencing (WES); gene set enrichment analysis
(GSEA); network analysis
13
The Protection and Evaluation in Epilepsy Patients after A Fixed Partial Denture
Zhang Yufeng, Sun Xiaolin
Stomatology Hospital of Jilin University
Objective: To evaluate the application of the bruxism splint after fixed partial denture in epilepsy
patients.
Methods: Female,42 years old,11,12 and 22 missing. The patient had been suffering from epilepsy.
Seizure frequency was 1 to 2 times a month. Because of the long-term use of antiepileptic drugs, she h
as been unresponsive and has a poor self-care ability. In the process of treatment, the doctor had a
2014 Xi’an Conference
134
variety of difficulties for her uncooperation and the seizures of epilepsy caused by the pain and
discomfort. So, we asked her to take antiepileptic drugs before operating , and finished the fixed
denture under her optimum status. At the same time, we gave her a bruxism splint in order to avoid
damage to natural teeth and dentures when seizures.
Results: After 54 months follow-up, we didn’t find any damage to the natural teeth and dentures with
seizures for more than 60 times(we changed the bruxism splint 4 times).The long-term effect was
significant. And the patient was satisfied with her prostheses.
Conclusion: The bruxism splint after fixed partial denture rehabilitation in epilepsy patients has a
protective role of natural teeth and dentures, so the bruxism splint should be widely applied in clinic for
epilepsy patients.
14
Effect of Cleaning Methods on Mechanical Properties of Prostheses Silicone Rubbers
Wang Junjie
Guanghua School of Stomatology, Hospital of Stomatology, Sun Yat-sen University
Purpose: To evaluate the effect of different cleaning methods on the mechanical properties of two
silicone rubbers used for maxillofacial prostheses, and to make recommendations for clinical use.
Methods: 2mm-thickness pigmented strips of A-2000 and ZY-1 silicone rubbers were prepared. 35
dumb-bell shaped specimens were cut from strips, which were used for Shore A hardness test, tensile
test, percentage elongation test and permanent deformation calculation. 35 crescent specimens were
made in the same way, which were used for tear test. All dumb-bell and crescent specimens were
randomly divided into 7 groups, 10 for each group (5 for each shape), to be processed as below:
(1)Group IPA: Immersed inIsopropyl alcohol for 6h, simulating the total immersion time of 1 year with
l min everyday. (2)Group Polident: Immersed in Polident solution for 90h, simulating the total
immersion time of 1 year with 15 min everyday. (3)Group Cleansoft: Immersed in Cleansoft solution
for 18h, simulating the total immersion time of l year with 3 min everyday. (4)Group Steradent:
Immersed in Stemdent solution for 60h, simulating the total immersion time of l year with 10 min
everyday. (5)Group distilled water: Immersed in distilled water for 60h, simulating the total immersion
time of l year with l 0 min everyday. (6)Group empty: Kept from light at room temperature for 60 h. (7)
Group pre-treatmen Tested immediately after preparation.
Results: 1. ZY-I had significantly higher tear strength than A-2000 in all groups (P<0.05). There was
no significant difference in other tested mechanical properties (Shore A hardness, tensile strength,
percentage elongation and permanent deformation) between the two silicone rubbers(P>0.05).
2. For each silicone rubber, there was no significant difference in the Shore A Hardness, tensile strength,
percentage elongation, permanent deformation and tear trength among different group (P>0.05).
Conclusion: The mechanical properties of A-2000 and ZY-1 silicone rubbers were not significantly
influenced with different cleaning methods.
Key words: Maxillofacial Prostheses; Silicone Rubber; Mechanical Properties; Cleaning Method
2014 Xi’an Conference
135
15
The Reaserch about The Relationship between Three Brand of Zironic Ceramic Trancemittance and Color
LI Chen, Wang Dalin, Wang Shaohai
Department of Stomatology, Changhai Hospital, Second Military Medical University, Shanghai
Purpose: To introduce a new indicator to the Colorimetric system so as to provide experimental basis
and to simulate natural dentin color much better, we analyze the relationship among zirconia dental
ceramic materials and light transmittance of L*, a*, b* and thickness.
Methods: Using X-rite color i7 spectrophotometer, three brands (Lava, Upcera, Doceram) zirconia
ceramic transmittance and reflectance (L*, a*, b*) were measured of different colors, different
thickness (0.9mm, 0.6mm, 0.3mm), the results were analyzed by using SPSS18.0 software, t[1]o
investigate the linear transmittance between the thickness and the color value.
Results: 1,The difference among the three brands of zirconia ceramic transmittance was not
statistically significant (p>0.05), while the transmission of three kinds of thickness of zirconia ceramic
was statistically significant (p<0.05). 2、the transmittance range of 0.9mm zirconia ceramic rate was
13.63~27.47; the transmittance range of the 0.6mm zirconia ceramic rate of 18.05~33.96, the
transmittance range of 0.3mm zirconia ceramic rate of 25.24~39.73. 3、There is a linear relation
among transmittance、thickness and color value of the three brands of zirconia ceramic,Upcera:TT=0.366*L*-thickness*0.661-0.280*b* ;Doceram:TT=0.524*L*-0.536*thickness-
0.237*b*;Lava:TT=0.210*L*-0.610*thickness-0.164*b*.
Conclusion: Three brands of zirconia ceramic transmittance range do not have the remarkable
difference, with the increase of thickness, transmittance decreases. With the increase of luminance the
transmittance increases gradually, while the zirconia ceramic is bluer, the light transmission is higher.
Therefore, in the all ceramic restoration process, the introduction of transmittance is important to
investigate the correlation between the transmittance and color, and redefine the natural tooth color
perception and representation.
Key words: Zirconia ceramic; Transmittance; Color
16
Correlation between Autophagy and Apoptosis in Oral Carcinoma IL-24 Gene Therapy
Li Jichen
Department of Oral and Maxillofacial Surgery, the First Affiliated Hospital of Harbin Medical University
Purpose: To study the role of autophagy in the IL-24-induced apoptosis in oral carcinoma. Improve the
effect of IL-24 gene therapy of oral carcinoma by inhibiting autophagy.
Methods: In this study, apoptosis induced by IL-24 in human oral squamous cell carcinoma cell line
(KB) was measured using the MTT assay, flow cytometry and Caspase-Glo®3/7 Assay. Autophagy
activation induced by IL-24 was revealed Transmission Electron Microscope, monodansylcadaverine
(MDC) staining, GFP-LC3 fluorescence and western blot assay of microtubule-associated protein 1
light chain 3 (LC3).
Results: By MDC staining, GFP-LC3 staining, Transmission Electron Microscope, Western blot
confirmed IL-24 not only induced apoptosis in oral carcinoma cells, but also induced autophagy in the
meantime. In addition, use 3-MA inhibited the IL-24-treated oral carcinoma cells can cause survival
rates decline, increased caspases activity and increased apoptosis rate.
Conclusion: Our results indicate that in human oral carcinoma, IL-24 gene therapy causes autophagy
2014 Xi’an Conference
136
activation to protect cancer cells from apoptosis. In conclusion, autophagy inhibition could have
promising potential as IL-24-based gene therapy against oral carcinoma.
Key words: IL-24; Gene therapy; Autophagy; Apoptosis; 3-MA
17
Effect of Different Surface Treatments on Bonding of Silicone Elastomer to Acrylic Resin
Li Xiaona
Dalian Stomatological Hospital
Purpose: To evaluate the effect of surface treatments on the bonding of silicone elastomer to acrylic
resin.
Methods: 56 acrylic resin strips were polished with 600-grit silicon carbide paper and divided
randomly into 4 groups. The bonding surface was pretreated with the following methods: Application
of Primer (Group C), Primer after sandblast (Group S), Primer after immersion in methyl methacrylate
(Group M), Primer after sandblast and immersion in methyl methacrylate (Group SM). 28 overlap-joint
models were made and tested by universal test machine. Seven specimens were fabricated for each of 4
groups. Failure loads and failure style were assessed for all specimens. The effect of different
treatments on acrylic resin surfaces by portable surface analyzer and scanning-electron microscopy
(SEM) were also determined.
Results: Group SM recorded the highest shear bond strength. This is followed by Group S, Group M
and Group C, respectively. Significant differences were found among the treatment categories (p<0.05).
All specimens in each group showed cohesive failure of the silicone elastomer. Group S demonstrated
significantly higher surface roughness values compared to Group C (p<0.05). No differences were
present between Group SM and Group S, Group M and Group C. SEM images reported that sandblast
and MMA treatment produced significant surface texture changes of the acrylic resin.
Conclusion: Treatment of acrylic resin by sandblast and MMA immersion can improve the adhesion
between maxillofacial silicone elastomer and acrylic resin.
Key words: Silicone elastomer; Acrylic resin; Surface treatment; Shear bond strength
18
Preliminary Clinical Study on Application of Computer-Assisted Surgery Technique in Maxillary Defect Reconstruction
Liang Jie, Shan Xiaofeng, Huang Jinwei, Zhang Lei, Cai Zhigang
Department of Oral Maxillofacial surgery, School of Stomatology, Peking University
Purpose: Maxillary defect caused by tumor, trauma, and congenital deformity shade great influence on
patients’ function and aesthetics, affecting their quality of life. As the development of Computer-
Assisted Surgery (CAS) technique became widely applied in Oral-Maxillofacial Surgery, the
reconstruction of maxillary defect is heading for a more precise and individualize criteria. This study
plan to compare different CAS method applied in maxillary reconstruction, in order to draw a
workflow for each method, evaluate their advantages and disadvantages and their clinical application
value.
Methods: 12 cases were included in this study , which received CAS assisted maxillary defect
reconstruction surgery during Mar.2012 – Mar.2014. Including the Navigation guided 3D-printed
Titanium Mesh Group: 2 cases, the Navigation guided 3D-printed Model Induced Pre-formed Titanium
2014 Xi’an Conference
137
Mesh Group: 5 cases, the 3D-printed Model Induced Pre-formed Titanium Mesh Group, 2 cases, the
3D-printed Model and Navigation Guided Group, 2 cases, the 3D-printed Model combined Surgical
Stent Group, 1 case. The CT scan would be obtained in all patients pre and post-operatively. The
models of pre-and –post operation were introduced into Geomagic Qualify 12.0, analyzed in 3D
compare function, report of the deviations were obtained.
Results: All patients in 5 groups achieved satisfying functional and aesthetical reconstruction outcome.
All cases were able to take semi-fluid food to normal food, with normal swallowing and speaking
function, with normal eye movement and vision. The 3D compare deviation indicating: groups adapting
navigation technique show lower standard deviation than non-navigation groups; when reconstructing a
defect that involves multiple facial anatomy landmarks, the 3D-Printed titanium mesh showed smaller
deviation with multiple buttress reconstruction and shorter operating time; the 3D-printed model
induced pre-formed titanium transfer the VSP more directly. Using 3D compare to evaluate the
repeatability of each transfer method, we found that Navigation surgery provided more stable results;
while compared to normal titanium mesh, the individualized printed titanium mesh showed advantages
on reconstructing large defect that relating multiple vital aesthetical landmarks with milder deviation
and shorter surgical time cost. Complications were mainly about: flap loss in 1 case, tumor recurrence
in 1 case, epiphora in 5 cases, ectropion in 1 case, wound dehiscence in 1 case, infection in 1case.
Conclusion: 1. The feasibility of CAS adapted in Maxillary Defect Reconstruction was proved.2.
Computer assisted surgery technique helps improving the safety, stability and accuracy in
reconstruction surgery of Brown Class II-V Defects.3. Each transfer method has its advantages: (1)
Navigation Surgery helps to control the safety, stability and accuracy of surgery. (2) Rapid prototyping
manufactured model helps directly reflecting the VSP. (3)Surgical stent indicates the position of grafts,
facilitating the fixation.(4) 3D-printed titanium mesh is beneficial in complex defects reconstruction,
helping to achieve precise and individualized reconstruction outcome.
Key words: Computer assisted surgery; Navigation Surgery; Rapid prototyping; 3D-printed Titanium
Implant; Surgical Template; and Maxillary Defect Reconstruction
19
High Expression of NBR1 Proteins May Be Associated with Epithelial-mesenchymal Transition (EMT) in Keratocystic odontogenic tumours
Liu Bing, Man Qiwen, Chen Gang, Zhao Yifang
Department of Oral and Maxillofacial Surgery, School and hospital of Stomatology, Wuhan University, China
Purpose: The aim of this study was to evaluate the expression of NBR1 in keratocystic odontogenic
tumours (KCOT), and also to investigate its possible relationship with epithelial-mesenchymal
transition (EMT) which has an important indication of invasion.
Methods: We detected the expression levels of NBR1 and some key EMT-related proteins (Snail, Slug,
Twist, E-cadherin, and N-cadherin) in clinical samples of KCOT and radicular cysts
by immunohistochemistry and then detected their mRNA expression by real-time quantitative
polymerase chain reaction (qPCR). The correlation between NBR1 and the tested EMT-related proteins
in KCOT was explored using Spearman’s rank correlation, followed by cluster analysis.
Results: The results showed that both the immunoreactivity and mRNA expression of NBR1 tested
were considerably increased in samples of KCOT compared with those in samples of radicular
cysts.The correlation analyses showed that the immunostains of EMT-related proteins in samples of
KCOT correlated closely with each other.The immunostains of these EMT-related proteins also
correlated closely with the immunostains of NBR1 in KCOT.More importantly, double-labelling
immunofluorescence analyses also showed that the distribution of NBR1 and E-cadherin was partially
synchronous in the samples of KCOT.
Conclusion: In conclusion, our results suggest that the high expression of NBR1 in KCOT has possible
2014 Xi’an Conference
138
association with the invasive behavior.
Key words: NBR1; Keratocystic odontogenic tumour; EMT-related proteins; Invasive
20
A Survey of Motivation and Psychology of Implant Treatment of 60 or Older Habitant in Panzhihua
Lv Linhu,Zhou Hui,Guo Ling
School of Stomatology,Luzhou Medical College
Purpose: To understand the motivation for implant treatment of people over the age of sixty in
Panzhihua and predict their subjective needs for implant treatment.
Methods: Simple random sampling method was adopted and a face-to-face interview was conducted
with the 60 or older at some public sites using a questionnaire to gather the baseline data for the
subsequent evaluation.Data entry and statistical analysis were completed by Epidata 3.0,and SPSS
13.0 respectively.
Results: A total of 300 questionnaires were handed out for face-to-face interview and 294
questionnaires were returned(efficiency 98%).Men on the number of missing teeth than women, the
difference has statistical significance. The motivation of planting treatment affected by gender, age,
education level.71.4% of the respondents don't choose to implant after edentulous, 82.6% of the
respondents think good teeth is to give people a nice impression in the communication in modern
society.
Conclusion: The motivation of implant treatment of older people is influenced by gender, age and
academic level. Edentulous will affect the physical and mental health of the old man and is a barrier to
get a nice impression in social activities.
21
The Expression of Neuropeptide Y Was Regulated by Coticosterone and Acetylcholine Via Respective Receptors in The Osteocytic MLO-Y4 Cells
Ma Yuanyuan*1, Wang Hang2
1 Guanghua School of Stomatology, Hospital of Stomatology, Sun Yat-sen University; Guanghua School of Stomatology, Hospital of Stomatology, Sun Yat-sen University
2 State Key Laboratory of Oral Diseases, West China Hospital of Stomatology; Department of Prosthodontics, West China College of Stomatology, Sichuan University
Purpose: Neuropeptide Y (NPY) is a potential modulator of bone remodeling. It is unknown whether
its expression is related with specific biochemical stimulations. Then, we investigated the effects of
corticosterone and acetylcholine (ACh) on the expression of NPY in the MLO-Y4 cells.
Methods: (1)MLO-Y4 cells were incubated with corticosterone and/or RU486 for 1, 3, 6, 12 and
24 h; (2) MLO-Y4 cells were treated by ACh and/or receptor antagonists including atropine,
mecamylamine and d-tubocurarine for 1, 2, 3, 4 and 5 days; (3)Then we detected the viability and
proliferation of cells, as well as the gene and protein expression of NPY by real-time PCR assay and
western blotting analysis respectively.
Results: (1)Corticosterone significantly reduced cells viability and upregulated the NPY expression at
the gene and the protein levels in a time-dependent manner, which were reversed by RU486. (2) ACh
2014 Xi’an Conference
139
significantly induced cells viability and proliferation and reduced the expression of NPY mRNA, which
was reversed by the pretreatment of receptors antagonists; ACh had no significant effects on the NPY
protein.
Conclusion: Corticosterone and ACh could regulate the cell viability and NPY expression in
osteocytes via respective receptors. There is possible casual relationship between the cell viability and
NPY gene expression, which needs further study.
Key words: Corticosterone; NPY; Osteocytes; Acetylcholine
22
The Approach of Tongue Pressure Measurement for Making Palatal Augmentation Prosthesis
Shigehiro Fujiwara, Takahiro Ono, Yoshitomo Minagi, YoshitsuguTokuda, Kazuhiro Murakami, Kazuhiro Hori, Yoshinobu Maeda
Dept. of Prosthodontics, Gerodontology and Oral Rehabilitation, Osaka Univ. Grad. Sch. of Dent
Purpose: Although the palatal volume of palatal augmentation prosthesis (PAP) is often designed with
soft waxes or tissue conditioning materials, it is difficult to know precisely about tongue-palate contact.
This report describes the attempt to determine the palatal volume by reference to tongue pressure
production with the tactile sensor sheet system.
Method: A 61-years-old male patient was extracted two thirds of right dorsum of tongue and grafted a
flap of the thigh because of tongue cancer and had eating and swallowing disorders after the operation.
Results: First, both new dentures were made because of ill-fitting old dentures. At the step of try-in, the
palatal volume was given with a soft wax by reference to a pressure indicating material. But problems
of food residue at palate were remained. And so tongue pressure production, which consisted duration,
maximum pressure of tongue-palate contact, was measured with tongue pressure measurement system,
then it was shown that too much contact between grafted flap and palate inhibited tongue movement.
After modify palatal volume by reference to this result, the problem was resolved.
Conclusion: It was suggested that tongue pressure measurement was useful for designing the palatal
volume of PAP
Key words: PAP(palatal augmentation prosthesis); Maxillofacial prosthesis; Tongue; Tongue pressure;
Dysphagia
23
Impression Technique for A Maxillofacial Pass-through Defect with Limitation of Mouth Opening:A Case Report
Zou Shiquan, Ren Weihong, Liu Peng
Stomatological hospital of Capital medical university
Purpose: To acquire the impression of the defect area with limitation of mouth opening, so that the
silicon obturator fabrication can be followed
Methods: Because of the limitation of mouth opening, the impression of the defect area can only be
acquired through the facial pass-through defect area. And also because of the existence of massive
undercuts, the polysiloxane impression should be hollow for the removal and future gypsum perfusion.
Gauze, injected polysiloxane impression material and a little balloon were employed for this purpose.
Results: The impression of the defect area was successfully acquired for the fabrication of silicon
2014 Xi’an Conference
140
obturator
Conclusion: For patients suffer from maxillofacial pass-through defect accompany with limitation of
mouth opening, impression technique can be confusing. Different instrument and methods can be
applied.
24
Contributing Factors for Abutment Teeth Survival on Obturator Prostheses
Shogo OZAWA, Kana MAKIHARA, Fumi YOSHIOKA, Shin MIYAMAE, Yoshinobu TANAKA
Aichi Gakuin University, School of Dentistry, Removable Prosthodontics.
Purpose: We have reported long term clinical observation of abutment teeth on obturator prostheses in
the last ISMR meeting at New Mexico. In order to gain retention and stability of obturator prosthesis
are mostly relied on abutment teeth, so that excessive load should be applied to the abutment teeth. The
aim of this study was to assess contributing factors for survival of abutment teeth on obturator
prostheses.
Methods: Ninety nine patients who were treated in Maxillofacial Prosthodontic Clinic, Aichi Gakuin
University Dental Hospital were enrolled in this study. Those who were followed less than three years
were excluded to demonstrate long-term clinical outcomes. Maxillary defect configuration (Aramany’s
classification), the number and kinds of retainers, followed up periods of abutment teeth, irradiation
history and number of remaining teeth were surveyed using the medical record and the clinical protocol.
Statistical analysis was performed using Kaplan-Meier method and Log-Rank test.
Results: Total of one hundred and sixty nine prostheses and four hundred and thirty eight abutment
teeth were studied. Average observation period is seven years and six months, and the longest case is
thirty one year’s follow up. Overall survival rate of the abutment teeth were 80.1 %. The statistical
analysis showed significant longer prognosis of abutment teeth was seen in Class I and II as compared
to Class IV patients. As for the kinds of retainer, there were no significant differences in longevity
among the retainer designs. Irradiated abutment teeth are significantly lower survival rate and cases of
more than seven remaining teeth are significantly higher survival rate.
Conclusion: Our survey revealed that survival rate of abutment teeth on obturators is 80.1 % in which
average observation periods is 7.5 years. Contributing factors of the teeth survival are defect size and
location, irradiation history and number of remaining teeth in a jaw.
Key words: Obturator; Abutment teeth; Long term observation; Survival rate
25
EPCs Transplantation for Microvascular Repair in Irradiated Tissue
Wu Shuyi, Chen Jiangfei, Wei Hongbo, Bai Shizhu, Zhao Yimin
School of Stomatology, Fourth Military Medical University; Guanghua School of Stomatology, Hospital of Stomatology, Sun Yat-sen University
Purpose: This study tried to investigate the therapeutic potential of EPCs in treatment of irradiated
tissue ischemia in vivo, hoping to provide a new way to improve the ischemic state of the irradiated
tissues.
Methods: EPCs were separated from the bone marrow of F344 inbred rats and then purified by
colonies selection. Before transplantation, we constructed the lenti-EmGFP and transduced the EmGFP
gene into the EPCs. With the purpose of finding the right time for EPCs transplantation, we used the
2014 Xi’an Conference
141
irradiated lower left hindlimb in F344 rat for the animal model and investigated the histological
changes and the expression levels of SDF-1, ICAM-1, VCAM-1 and E-selectin. In the selective time,
we transplanted EPCs into the F344 rat via tail vein injection. 8 weeks after transplantation, we
observed EPCs homing situation through immunofluorescence staining of the left medial
grastrocnemius frozen sections and studied the blood flow change through microangiography and
microCT scanning.
Results: Flow cytometry analysis showed the cells were positive for a panel of markers, including
CD34(2.45%), CD144(95.8%),CD31(80.9%)and VEGFR2(46.6%). Also the cells were positive for
vWF immunofluorescence staining,DiI-AcLDL uptake, FITC -UEA-1 binding, Weibel-Palade body
containing, and could form tubular-like structures in matrigel. After EmGFP gen transduction, more
than 90% EPCs could be successfully labeled when the MOI was 50. When the lower left hindlimbs of
the F344 rats were irradiated, inflammatory reaction mainly disappeared 3 weeks after radiation, but
the expression of SDF-1, ICAM-1, VCAM-1 and E-selectin kept in high levels. Thus, we selected this
time to be a relative right time for EPCs transplantation. 8 weeks after cells transplantation, we found
EPCs could successfully home to the irradiated tissue and contribute to microvascular repair, helping to
improve the blood flow in irradiated region.
Conclusion: This study proved that EPCs transplantation could enhance the microvascular repair in
irradiated tissue. It would be a new method to solve the ischemia problem after irradiation, and worth
further investigation.
Key words: Endothelial Progenitor Cells (EPCs); Radiotherapy; Homing
26
Molecular Mechanism and Potential Roles of TNF-α-enhanced Fusion between Oral Squamous Cell Carcinoma Cells and Endothelial Cells
Yan Tinglin, Shang Zhengjun
Stomatology of wuhan university
Purpose: Uncover a new insight into the molecular regulation and signal transduction mechanisms
responsible for TNF-α-promoted oral cancer-endothelial cell fusion, and provide valuable insights for
current and future in potential mechanism underlying tumor angiogenesis.
Methods: 1.Reverse transcription and RT-PCR2.Protein extraction and Western blot analysis
3.immunofluorescence4.hybridization in situ
Results: 1. TNF-α increased the expression of syncytin-1 and ASCT-2 on SCC-9 and HUVECs
respectively 2. The expression of syncytin-1 is relative to the Wnt/β-catenin signaling pathway.
Conclusion: TNF-α promote cancer-endothelial cell fusion through Wnt/β-catenin activation-mediated
upregulation of fusogenic protein syncytin-1.
27
Application of the Prosthesis with Titanium Framework and Functional Impressiontechnique in The Reconstruction of The Unilateral Maxillary Defect
Tong Ling, Li Suling, Wang Lu
Stomatological hospital of Chongqing medical university
Purpose: To investigate the clinical application and effect of the prosthesis with titanium framework
and functional impression technique in there construction of the unilateral maxillary defect.
2014 Xi’an Conference
142
Methods: We had selected ten cases which used the obturator prosthesis with titanium framework and
functional impression technique to observe the therapeutic effect. Masticatory efficiency test and
speech intelligibility test and clinical effect evaluation of self were conducted to evaluate the functions
of mastication and speaking.
Results: The prosthesis with titanium framework was excellent in biocompatibility, light in weight,
small in volume, comfortable in feeling; the clasps had better elasticproperty and provided enough
retention that they can decrease the stress of abutments and residual ridge to protect them.
Conclusion: The prosthesis with titanium framework and functional impression technique can improve
partly function of the speeching, swallowing, sucking and masticating of the patients of unilateral
maxillary defect.
28
The Role of Sclerostin in Mediating Alveolar Bone Remodeling in Response to Tooth Loss
Wang Lufei, Deng Meng, Bai Ding, Han Xianglong
Department of Orthodontics, State Key Laboratory of Oral Diseases, West China Hospital of Stomatology, Sichuan University
Purpose: Tooth loss is a common and serious clinical issue. When tooth is missing, the lack of normal
functional occlusion (occlusal hypofunction) would lead to a reduced alveolar bone mass, which is very
crucial in dentofacial rehabilitation. However, the related molecular mechanism has not been fully
identified. Since occlusal hypofunction can be considered as a kind of unloading environment, in view
of the important role of sclerostin in mediating unloading-induced bone remodeling, we conducted the
present study to investigate the characteristic of sclerostin in tooth loss-induced alveolar bone loss.
Methods: Eight 10-week male Sprague-Dawley rats were used for this experiment. The unilateral
maxillary molar was extracted while the homolateral upper incisor was abraded, aiming to induce
occlusal hypofunction. For each rat, extraction side (occlusal hypofunction) and non-extraction side
(control) were set as self-control comparison. 8 weeks after tooth extraction, the rats were sacrificed
and the specimens were collected for analyses. We applied X-ray and micro-CT for alveolar bone
histomorphometric evaluation, and HE staining for histological evaluation. Osteoclast number was
calculated by Tartrate-resistant acid phosphatase (TRAP) staining, while expressions of sclerostin and
β-catenin were assessed by immunohistochemistry staining.
Results: Apparent bone loss and architecture deterioration were observed at occlusal hypofunction side
by X-ray, micro-CT and HE staining. Compared with control side, bone mineral density of
hypofunction side was decreased dramatically, and the ratio of bone volume to total volume was
significantly lower (P < 0.001). Similarly, compared with control side, TRAP staining showed a higher
number of osteoclast at hypofunction side (P < 0.001). In addition, the expression of sclerostin was
increased while β-catenin was decreased when functional occlusion was lacking.
Conclusion: This study preliminarily elucidates the role of sclerostin in mediating alveolar bone
remodeling in response to tooth loss. Based on the current findings, it is indicated that sclerostin and
Wnt/β-catenin signal are closely associated with tooth loss-induced alveolar bone loss. Anti-sclerostin
treatment may be considered as a promising therapeutic strategy in preventing tooth loss-induced
alveolar bone loss, and it would obtain widespread application in dentofacial rehabilitation.
29
Measurement and Analysis of The Distribution Range of Chroma Values of Healthy Anterior Gingival in Han Population
Wang Shaohai, Wang Dalin, Li Chen, Li Hongjiao, Xu Lijuan, Jiang Caidi
2014 Xi’an Conference
143
Department of Stomatology, Changhai Hospital, Second Military Medical University, Shanghai
Purpose: In order to get the current distribution range and distribution characteristics of Chinese Han
population healthy anterior gingival color chroma values , the gingival color value of healthy Han
people and the effects of gender、age、region and areas on it were investigated .
Methods: 400 healthy Han people were chosen from 5 major cities (Beijin Shanghai,Guang
zhou,Henan,Xi’an) , and chroma value of their arterial gingival color were measured and analyzed with
MINOLTA CR-321 clorimeter .
Results: 1、In the comparison of different region of gingival color chroma value,The a* values of
attached gingiva between the root of two teeth and distal incisor attached gingiva has no significant
difference(0.02<P<0.05); the b* values of mesial incisor gingival papilla and distal incisor
attached gingiva has no significant difference(p>0.5);the gingival color chroma values of the rest
areas have statistical significant differences(p<0.001).The color difference △E between various
parts was>2;2、There was no significant difference on Chinese Han population healthy anterior
gingival color by area(P>0.01,△E<2) ;3、Chroma values of Chinese Han population healthy
anterior gingival color was measured by age, multi group comparison results of a* values and b* values
showed no significant difference(p>0.01), while there are significant differences between groups of
L* value(p=0.012<0.05),by a further pairwise comparison,the difference between Group 18-29
(P<0.01)and group 30-39and difference between group 30-39 and group 40-49(P=0.023)had
statistical significance. 4、There was significant difference on Chinese Han population healthy anterior
gingival color by gender(△E >2),statistically significant differences were found in L* value and b*
value (P<0.001), there was no significant difference of a* value (P=0.666). 5、The range of chorma
values of Chinese Han population was L* value:28.84~57.99,a*value:3.37~16.28,b*value:1.43~8.63.
Conclusion: This investigation reveals that there was no significant difference on color by area and age,
while the difference in gingival color by region and gender was significant; The range of chorma values
of Chinese Han population was L* value:28.84~57.99,a*value:3.37~16.28,b*value:1.43~8.63
Key words: Han; Healthy gingival; Color
30
Effects of A Hindered Amine Light Stabilizer on The Color Stability and Mechnical Properties of Maxillofacial Silicone Elastomer
Mo Wenjuan, Liang Qinye, Li Yan *
Guanghua School of Stomatology, Hospital of Stomatology, Sun Yat-sen University
Purpose: To evaluate the effects of a hindered amine light stabilizer on the color stability and
mechanical properties of a maxillofacial silicone elastomer, and to explore an optimum dosage which
ensures better color stability and benign mechanical properties.
Methods: The intrinsically pigmented SY-1 maxillofacial silicone rubber was divided into 8 groups on
the basis of the additive ratio of the hindered amine light stabilizer Tinuvin123, which increased as
0.00%, 0.05%, 1.00%, 1.50%, 2.00%, 2.50%, 3.00%, 3.50% by weight. Specimens were made in
plexiglass moulds at 70℃ for 1.5h and 26℃ for 24h in dark place.
Experiment Ⅰ: 80 columniform specimens (10mm diameter, 10mm height), 10 for each group, were
picked out for the tests of color stability. All specimens underwent a 480h ultraviolet aging test.
Chromatic values (L*a*b*) were measured before and after test and the color differences (ΔE) were
calculated. Experiment Ⅱ: The silicone rubber sheets (2mm thickness) were made and cut into dumb-
bell shape and right angle shape specimens. 80 dumb-bell shaped specimens, 10 for each group, were
picked out for the tests of Shore A hardness, tensile strength, elongation at break and permanent
deformation. Similarly, 80 acceptable right-angle shaped specimens were picked out for the tests of tear
2014 Xi’an Conference
144
strength.Data were analyzed with 1-way ANOVA, Jonckheere-Terpstra rank-sum test, Bonferroni, LSD,
and Dunnett multiple tests (α=0.05).
Results: 1.The lightness value increased, the reddish degree lightened and the yellowish degree
darkened as the mass ratio of Tinuvin123 rised. 2. The color difference (ΔE) value began to decrease
significantly (P<0.05) once the dosage of Tinuvin123 reached to 1% by weight.3. The Shore A hardness
began to increase significantly (P<0.05) once the dosage reached to 3.0% by weight.4. The tensile
strength, the elongation at break and the tear strength began to decrease significantly (P<0.05) once the
dosage reached to 2.5%, 3.0% and 3.5%, respectively. 5. The permanent deformation had no significant
difference (P>0.05) when the dosage was not exceeding 3.5% by weight.
Conclusion: The color stability of the intrinsically pigmented SY-1 maxillofacial silicone elastomer
can be improved through adding hindered amine light stabilizer Tinuvin123. The mass ratio of 2.0% by
weight is an optimal dosage which would meanwhile ensure the benign mechanical properties.
Key words: Maxillofacial prostheses; Silicone elastomer; Hindered amine light stabilizer; Color
stability; Mechanical properties
31
Intraoral Approach for Mandibular Benign Tumor Resection and Mandible Reconstruction with Non-vascularized Iliac Graft
Wu HanJiang
the Second Xiangya Hospital, Central South University
Purpose: To evaluate the feasibility and reconstructive efficacy of intraoral approach for mandibular
benign tumor resection and mandible reconstruction with non-vascularized iliac graft.
Methods: A retrospective review was performed of 54 patients who underwent mandibular benign
tumor resection and mandible reconstruction with non-vascularized iliac graft from January 2009
through December 2012 in the Second Xiangya Hospital. All the surgery were performed through the
intraoral approach, and pretragal minimal incision was also made when the condylar process could be
preserved. According to the UrKen's classification of mandibular defects, there were 10 cases of CRB,
22 cases of RBS, 3 cases of BSB, 15 cases of BS, and 4 cases of S, with defect sizes ranged from 3 cm
to 13 cm. The homolateral or hibateral ilium was cut off accordingly to reconstruct the mandible en
bloc or deblock, with a height of 3 cm. The ilium was fixed with titanium miniplates or reconstruction
plates, and the intra-oral wounds were double-deck sutured with absorbable suture lines. Two drainage
tubes were laid and exited from the back of submandibular region or opisthotic hairline. In 26 patients
of the present series, digital surgical technic was applicated for the shaping of titanium plates.
Results: Of the 54 patients, wound effusion occurred in 2 patients, wound infection occurred in 3
patients, and delayed fistula of the wound occurred in 6 patients. Gradual wound healing was observed
after daily wound dressings and / or secondary surgery in these 11 patients. All patients were followed
for approximately 1 to 3 years, and they were satisfied with the esthetic and functional results of the
donor and recipient sites after the reconstruction.
Conclusion: Intraoral approach for mandibular benign tumor resection and mandible reconstruction
with non-vascularized iliac graft is a new surgical technic with several obvious advantages, including
satisfactory esthetic and functional results, high success rate of non-vascularized iliac graft, and lower
complication rate of the donor and recipient sites. The key steps of the surgical technic are tumor
ressection, shaping of the titanium plates, iliac graft, fixation of titanium plates, and adequate wound
drainage. Additionally, application of digital surgical technic is of great value in mandible
reconstruction.
Key words: Intraoral approach; Tumor; Reconstruction; Iliac graft
2014 Xi’an Conference
145
32
The Role of MiR-136 in Osteocyte Autophagy Activated by Estrogen Deficiency in Ovariectomized Mice
Wu Junhua
School of Stamotology , Tongji University
Purpose: The Jaw bone loss is associated with osteoporosis induced by imbalanced estrogen levels.
The response of osteocyte to estrogen play an important role in jaw bone absorption and homeostasis.
The reduction of the osteocyte autophagy is one of the important reasons of osteopenia.miRNA also
play an important role in the regulation of bone formation and absorption. In metabolic bone diseases
such as osteoporosis, the miRNA dysfunction is an important pathological factor. According the effect
and mechanism of miRNA, specific knockout of the target gene of miRNA may be one of the effective
means for the treatment of metabolic bone disease.
Methods: First, we screened the miRNAs which were differentially expressed between the jaw bone of
ovariectomized mice and that of normal mice by miRNA microarray. And found that 6 miRNAs were
upregulated after OVX, whereas 4 miRNAs were downregulated. Among these miRNAs, miR-136
exhibited the greatest changes. To identify the mediation of miR-136 in the response of osteocyte to
estrogen, we treated osteocyte-like MLO-Y4 cells with E2, and found that estrogen can rapidly inhibit
the expression of miR-136, which suggests that miR-136 is involved in the response of osteocyte to
estrogen. To further explore the relationship between miR-136 and osteocyte autophagy, we transfected
the miR-136 mimics and inhibitors in osteocyte-like MLO- Y4 cells, and test the phos- phorylation of
the key autophagy related protein Erk1/2 and the expression ofLC3-I/LC-3II by Western hybridization.
Results: Overexpression of miR-136 canupregulate the phos- phorylation of Erk1/2 in osteocyte-like
MLO-Y4 cells, while inhibition of miR-136 canget the opposite result. Moreover, overexpression of
miR-136 enhanced autophagy, and inhibition of miR-136 decreased autophagy.
Conclusion: MiR-136 is involved in the MAPK/ERK pathway activated by 17-β estradiol receptor,
andenhance autophagy activity in osteocyte-like MLO-Y4 cells. This study may provide a newidea and
theoretical basis for therapeutic targets of mandible osteoporosis.
Key words: Osteocyte; Micro-RNA; Autophagy
33
Increasing the Success Rate of Impression for Rehabilitation of Maxillofacial Defects with Prostheses through Nursing Care
Guanghua School of Stomatology, Hospital of Stomatology, Sun Yat-sen University
Zhang Xueling
Purpose: To explore the effect of nursing care on increasing the success rate of impression for
rehabilitation of maxillofacial defect with prostheses.
Methods: Before impressing for maxillofacial defect, a deep communication between maxillofacial
prosthodontist, nurse and patient was needed, in order to make a comprehensive treatment plan. Based
on the plan, the nurse should provide detailed and directed nursing care, including the patient’s
psychological care, mouth-opening training, breathing training before impressing and selection of
impression material, etc.
Results: The first success rate of impression for maxillofacial defects rose remarkably from 50% to
82% through the nursing care and operation ways listed above.
Conclusion: Detailed and directed nursing care could raise the impression success rate of rehabilitation
of maxillofacial defects with prostheses, as well as the comfort of patient and the working efficiency of
maxillofacial prosthodontist.
2014 Xi’an Conference
146
Key words: Nursing care; Impression; Prostheses; Maxillofacial Defect
34
Reconstruction of Hard and Soft Palate Defect with Dysarthria Dyspagia : A Case Report
Yamamoto Masaaki1*, Ono Takahiro
1, Sato Shizuka
2, Nago Shotaro
2, Kumakura
Isami2, Maeda Yoshinobu
1
1 Osaka University Graduate School Of Dentistry, Suita, Japan
2 Senri Rehabilitation Hospital, Minoh, Japan
Purpose: The maxillofacial defects lead to dysarthria and dysphagia in many cases. We usually treat
with dento-maxillary prosthesis with obturator for these cases. This report presents an application of
dento-maxillary prosthesis with a long-shaped obturator extended posterosuperioly in maxillectomy
patient with hard and soft palate defect.
Method: The patient is fifty-five years old man, who was affected by the carcinoma (T4aN2cM0) of
maxilla, with hard and soft palate defect in other hospital. He was treated with radiation therapy (60gy)
after surgery. He had dysarthria and dysphaiga stemming from pharyngeal contraction failure and silent
aspiration.
Results: The dento-maxillary prosthesis was applied to the patient. First, although the prosthesis was
attached with normal-shaped obturator for hard and soft palate defect, the functional disorder has not
improved. After that, the prosthesis attached PLP or Bulb-PLP, or nasal speaking valve (NSV) was
applied, but he felt strongly against these attachments and could not apply. Finally, the prosthesis
attached a long-shaped obturator extended to the posterior wall of pharynx from inside the defect was
applied, and dysarthria and dysphagia has improved. In addition, Swallowing training with thick has
done for dysphagia.
Conclusion: It was suggested that the obturator was useful for pharyngeal contraction failure, but that
this treatment was insufficient for other function. Further prosthetic treatment is under consideration.
Key words*: Obturator;Dysarthria; Dysphagia
35
The Activity of Hybrid Vector-mediated Interleukin-24 for Oral Carcinoma Drug Resistant Cells
Yang Dezhao
Department of Oral and Maxillofacial Surgery, The First Affiliated Hospital of Harbin Medical University
Purpose: Evaluate the potential therapeutic effect of IL-24 against KB (human oral squamous cell
carcinoma cells line) and KBv (Vincristine resistant KB cells line). To seek a new way for the therapy
of drug resistant oral carcinoma.
Methods: KB (human oral squamous cell carcinoma) and KBv (vincristine resistant KB cell line) were
utilized in this study. The human keratinocyte cell line HaCaT was used as a positive control for
receptor detection. Apoptosis induced by IL-24 in human oral squamous cell carcinoma cell line (KB
and KBV) was measured using the MTT assay, flow cytometry, Caspase-Glo®3/7 assay and Western
Blot assay.
Results: By MTT assay, we compared the drug resistance of KB and KBV, KBV cells had normal cell
viability under 100ng/ml Vincristine environment, but the cell viability of KB cells was significantly
decreased. Use AdLTR2EF1α-IL24-treated cells, we found that IL-24 significantly inhibited cell
2014 Xi’an Conference
147
viability and induce apoptosis in KB and KBV cells, but no harmful effects toward normal cells HaCaT.
Conclusion: Our results indicated that IL-24 not only induced apoptosis in oral carcinoma cells, but
also induced apoptosis in oral drug resistance carcinoma cells. In addition, it has no harmful effects
toward normal cells. In conclusion, IL-24 could have promising potential as gene therapy against oral
drug resistance carcinoma.
Key words: IL-24; Gene therapy; Drug resistance; Apoptosis
36
Evaluation of Using Casting Maxillary Prosthesis to Repair for 9 Patients of The Part of Maxilla Were Excised
Chao Yi
Stomatological Hospital of Nanjing Medical University
Purpose: Evaluated the function and aesthetic effect of using casting maxillary prosthesis to repair for
9 patients’ facial collapse due to the part of maxilla were excised in the tumor surgery
Methods: Due to the part of maxilla were excised in the tumor surgery, when the surgery trauma was
recovered thoroughly, the 9 patients of facial collapse were repair with casting maxillary prosthesis in
6~8 weeks after the surgery, then made a return visit after three months’ wearing, so as to observed the
following four indicators including the extent of plumpness of face from appearance of these 9 patients,
the articulation of the pronunciation , the masticatory efficiency, whether inorrhea and bucking and so
on occur when drinking water and swallowing after wearing the maxillary prosthesis, and evaluated
whether the prosthesis wearing has more remarkable promotion in comparison to the previous
condition.
Results: After prosthesis repair, not only the 9 patients’ masticatory efficiency was improved, the basic
feeding was not affected, no inorrhea and bucking occur while drinking water and swallowing, but also
the articulation was better, and they could communicate smoothly with others; they showed more
confidence for their facial collapse had recovered well.
Conclusion: Regarding to the maxillary prosthesis repaired for the maxillary defect, the function and
aesthetic effect were of relatively outstanding advanced after the treatment of maxillary prosthesis
repaired in comparison to the previous status.
37
Measured The Adhesive Properties of ZY-1 and ZY-2 Silicone Rubbers Curing by Steps
Han Ying, Li Xiaohong
Stomatological Hospital of Xi’an Jiaotong University
Purpose: To study the influence of the adhesive strength between the ZY-1 and ZY-2 silicone rubbers,
which was cured step by step.
Methods: Under Constant temperature 80 ℃ ,the group of silicone rubber adhesive (Adhesive A) was
used for positive control group. The adhesive strength of different teams between ZY-1 and ZY-2 were
measured and statistical analysis was done. The Bonding interface of Silicone rubber was observed by
scanning electron microscope.
Results: There were no significant differences between direct experimental group and positive control
group. Scanning electron microscope found that the two materials formed a good interfacial bonding
and had no gap.
2014 Xi’an Conference
148
Conclusion: Ensuring each layer of silicone didn’t occur deformation. Step by step solidification of
ZY-1 and ZY-2 silicone rubber sat 15-minute can get a better adhesion.
Key words: Silicone elastomers; Adhesive strength; Scanning electron microscopy
38
The Most Suitable Aperture Size and Porosity for Porous
Zhang Ling,Guo Ling
School of Stomatology,Luzhou Medical College
Purpose: Porous tantalum has the advantages of high volumetric porosity, low modulus of elasticity,
and excellent osteoinduction, biocompatibility and safety included. However,its cost is too high and
processing technic is complex,limiting its clinical use.Consequently,it is necessary to look for a
material with similar construction.Titanium has the advantages of exceptional biocompatibility and
biosecurity. Above all,the material cost is low,which can be made into a substitute of tantalum.Porous
Titanium has proven to promote bone growth,but there has not been a systematic analysis for the most
suitable aperture size and porosity.
Method: Electronic and manual search of the literature was conducted, and randomized controlled
trials (RCTs) and controlled clinical trials (CCTs) between January 2004 and November 2014
comparing different aperture size and porosity of porous titanium were evaluated for this review.
Results: A total of 2397 articles were identified by the literature search. Finally, 3 eligible studies were
selected in this meta-analysis.
Conclusion: The most suitable aperture size is 1.0-2.0mm and porosity 65%-90%.
Key words: The most suitable aperture size, porosity, Porous titanium, oral implant.
39
Research Progress on Prenatal Ultrasound in The Diagnosis of Cleft lip and Palate
Zhang Liuchao, Wang Jingmin.
1. Dept. of Oral and Maxillofacial Surgery, Dalian Stomatological Hospital, Dalian,China; 2. Dept. of Obstetrics and Gynecology, The First Affiliated Hospital of Dalian Medical University, Dalian, China
Abstract: Cleft lip and palate is a common congenital deformity in oral and maxillofacial surgery.
Along with the continuing improvement of Chinese economy income, education, living standards and
medical technology, more and more parents of cleft lip palate children, whom diagnosis is confirmed
by prenatal ultrasound examination, refer to dental hospital for consultation .Thus paying attention to
prenatal diagnosis and treatment of cleft lip palate deformity has great significance. This article
reviewed prenatal ultrasound diagnosis of cleft lip palate and relevant treatment strategy.
Key words: Cleft lip and palate; Prenatal diagnosis; Ultrasound; Examination
2014 Xi’an Conference
149
40
Anatomic Study of The Blood Supply of Oral Mucoperiosteum in Minipig
Zhang Xueming,Wang Zuolin
Hospital of Stomatology, Tongji University
Purpose: To provide vascular anatomical basis for the incision design of the oral mucoperiosteal flap.
Methods: The blood supply source, ramification and distribution of the oral mucoperiosteum of Mini-
pigs were investigated through latex perfusion and micro-dissection, and the micro-vasculature through
ink perfusion and tissue section technique.
Results: The vascular supply of the gingival mucoperiosteum came from the artery going through the
muscle layer beneath the alveolar mucosa of the vestibular sulcus, which issued branches toward and
into the lamina propria of the gingiva vertically to the mucogingival junction. The microvascular of the
lamina propria was constructed vertically to the surface of the epithelium The vascular supply of the
hard palatine mucoperiosteum was provided by major palatine artery. Double vascular network could
be seen in the submucosa layer.The vasculature of the palatine plica had a tree-like structure.
Conclusion: The incision design of oral mucoperiosteum flap should follow its vasculature and
anatomic character. The gingival mucoperiosteum should not be dissected into two layers when
elevating the flap, while the hard palatine mucoperiosteum flap could be dissected properly
41
Intrinsic Gene Expression During Regeneration in Maxilla of Salamander
Feng Zhihong, Wen Xuan, Liu Huan, Zheng Yinghui , Zhao Yimin *
Department of Prosthodontics,School of Stomatology,Fourth Military Medical University
Purpose: The extensive regeneration ability of salamander, particularly in relation to maxilla re-growth
following resection, is becoming increasingly recognized as a useful model system for understanding
intrinsic gene expression in a whole animal context. As such, they present a simplified and controlled
regenerating model system which can potentially provide clues as to the mechanism involved in the
programming and polarity of resected maxilla. This research was to display the differential expression
of the related gene in the maxilla regernation of slamander, then to reveal the posible mechnism to
control the maxilla regerneration.
Methods: After the anesthesia in 0.1%tricaine, the distal portion of right maxilla and the surounding
soft tissue, about 4mm, was resctected. Then, the salamanders were put in the 0.5% sulfamerazine
solution for 12h to protect the wouds. The specimen were collected at 0d, 1d, 3d, 5d, 7d, 9d, 12d, 17d,
20d and kept in the liquid nitrogen. The specimen include the regenerated, the proximal orignal bone
and surounding soft tissue. High RNA-sequence technique was applicated to detect the differential
expression of RNA. The related gene expression of the bone regeneration were summarized.
Results: The results demonstrated an active transcriptome with extensive differential gene expression
focused at the original distalpart of the maxilla explant where the regenerating blastema was located.
The transcription profiles also revealed that expression patterns showed subtle differences in the levels
of gene expression rather than the presenceor absence of certain genes. The result of analysis revealed
that the differential expression ofSOX2, Nanog, Sall4, Tcf, Hif, TNF, TGF, FGF, MAPK, NOTCH,
BMP, NAGA,JAK-STAT.
Conclusion: The self-regeneration of the resected maxilla was ordered controlled through a
complicated gene and molecular network. The study of the related gene and molecular expression must
play an important role to reveal the regeneration mechnisim of the maxilla. Epimorphosis (seil-
regeneration) maybe provide a possible way to reconstruct the maxillary defect for patients.
2014 Xi’an Conference
150
Key words: Maxilla; Epimorphosis; Gene; self-regeneration.
42
Effect of Nursing Cooperation on Restoration of Maxillary Defect with Hollow Obturator
Lu Lei, Zhang Xueling, Wu Shuyi *
Department of Prosthodontics, Guanghua School of Stomatology, Hospital of Stomatology, Sun Yat-sen University
Purpose: To explore the effect of nursing cooperation on restoration of maxillary defect with hollow
obturator.
Methods: 24 patients suffering from acquired maxillary defect were chosen and restored with
maxillary hollow obturator by specialized training maxillofacial prosthodontist and nurse. The nurse
kindly provides psychological nursing, oral health education, oral hygiene instruction and mouth-
opening training before restoration, and well prepared the sterile appliances and strengthened chairside
psychological nursing during the whole restoration procedure. Finally, satisfaction survey and
psychological condition were estimated after obturator restoration.
Results: All of the obturators had good retention, favorable stability, nice masticatory function and
could obviously improve patients’ facial appearance. Results showed that the satisfaction degree of
patient to the obturators was 100%, as well as the one of patients to the nursing cooperation. 91.67% of
the patients remarkably improved their psychological condition when 8.33% of the patients also had
slight improvement.
Conclusion: Good nursing cooperation was an important pledge to make obturator prostheses of
maxillary defect successful.
Key words: Nursing cooperation; Maxillary defect; Obturator
43
Comparative Studies on Tongue Reconstruction after Hemiglossectomy with Forearm Flap Versus Anterolateral Thigh Flap
Shen Zhiyuan
Department of Oral and Maxillofacial Surgery, the third hospital of the fourth Military Medical University, Shanxi Xi’an 710032, China.
Objective: To evaluate the function in swallowing and speech after the tongue carcinoma surgically
resected and function recovered with forearrn flap or anterolateral thigh flap.
Methods: 20 cases of tongue cancer patients received tumor resection and reconstruction between July
2013 and July 2014. 14 patients were reconstucted using forearm flap and 6 patients were reconstructed
with anterolateral thigth flap. All of them were followed postoperatively to compare the outcome of
functional recovery in swallowing and speech after 6 months.
Results: There was no significant difference between two groups in the swallowing function and the
language articulation. In the recipient site, the forearm flap group had 12 patients with hypertrophic
scarring, 10 patients with numbness of skin-grafted area and 2 patients with function impairment;
however, the anterolateral thigh flap group had 1 patients with hypertrophic scarring and 0 patients with
function impairment.
Conclusion: The anterolateral thigh flap; With a long pedicle; Suitable vessel diameter; And low donor
site morbidity; Could be the ideal flap for hemiglossectomy defect reconstruction
2014 Xi’an Conference
151
44
Nerve Growth Factor-modified Mesenchymal Stem Cells Enhance Recovery of Inferior Alveolar Nerve in Rabbit Mandibular Distraction Osteogenesis
Wang Lei, Du Zhaojie, Cao Jian, Yang Xinjie, Lei Delin
Department of Oral and Maxillofacial Surgery, School of Stomatology, the Fourth Military Medical University
Purpose: Distraction osteogenesis (DO) is widely used in treating bone deformities and defects.
However, inferior alveolar nerve (IAN) injury is a concern in mandibular DO. The purpose of this
study was to investigate the feasibility of lentiviral-mediated human nerve growth factor beta (hNGFβ)
of the IAN in the rabbit model of mandible DO.
Methods: Bone marrow mesenchymal stem cells (MSCs) from rabbit mandibles were isolated and
genetically engineered using recombinant lentiviral vector containing hNGFβ. Twenty New Zealand
white rabbits underwent mandibular DO, and 5 million MSCs transduced with hNGFβ-vector or
control vector were transplanted around the IAN in the bone fracture gap during the surgery (n=10 for
each group). After gradual distraction, IAN samples were harvested for nerve histologic and
histomorphometric analysis.
Results: The genetically engineered MSCs transducted by the lentiviral vector were able to secret
hNGFβ at physiologically relevant levels as measured by enzyme-linked immunoabsorbent assay. IAN
histology showed more regenerating nerve fibers and less myelin debris in the group with implantation
of hNGFβ-modified MSCs when compared with the control group. Nerve histomorphometric analysis
showed markedly increased myelinated fiber density in the group with implantation of hNGFβ-
modified MSCs than the control group.
Conclusion: The data suggest that implantation of hNGFβ-modified MSCs can markedly accelerate the
morphological recovery of the IAN in rabbit mandibular DO. Lentiviral-mediated gene therapy
approach to deliver hNGFβ via MSCs may be a promising method in minimizing DO-induced nerve
injury clinically.
Key words: Nerve growth factor; Distraction osteogenesis; Bone marrow mesenchymal stem cells;
Gene therapy; Nerve injury.
45
The Experimental Study of Stem Cells on Prevention of Irradiation Injury of Salivary Gland in Mice
Wang Yan, Liu Bin,Liu Yanpu,Hu Hanqing,Xing Hongyan.
Department of Oral and Maxillofacial Surgery, Qin Du Hospital, Fourth Military Medical Xi’an 710032;2. Department of Biology and Laboratory Animal Center, Qin Du Hospital, Fourth Military Medical Shan Xi Xi’an 710032
Objective: To investigate the feasibility of stem cells to prevent salivary gland irradiation injury, and
provide a way and experimental evidence for preventing dry mouth in clinic.
Methods: First,ASCs and BMSCs were isolated and cultured from male mice, the characteristics of
two kinds of cells would be identified . Second,found an salivary gland radiation damage model,The mice were devided into 6 group, submandibular glands of every group mice were locally irradiated
respectively in the head and neck region with a single dose of 0Gy, 12Gy, 15Gy, 18Gy, 21Gy, 24Gy by
a linear accelerator, salivary gland injury were be measured at the one week, one month, two months,three months after irradiation by measuring weight,gland function and gland morphology. Choose the
mice of the ideal irradiation dose to provide irradiation model for next experiment. At last, injection
stem cells into the mice This part of experiment includes 4 groups, control group, IR + NS, IR +ASCs,
IR + BMSCs. Two kinds of the third generation stem cells were injected into the mice respectively by
2014 Xi’an Conference
152
caudal vein twice every week, which were just irradiated locally 18Gy, totally last for 8 weeks. The cell
concentration is 2×105/ml, the volume is 0.2ml. It will be detected whether injection stem cells could
preserve salivary gland irradiation injury by measuring every index at the two months, three months,
four months after injection cells.
Results: We could cultivated ASCs and BMSCs successfully. Salivary gland Radiation damage is dose
dependent. The more irradiation dose, the lower the saliva flow rate is. 18Gy exposure group tissue
slice with a lot of inflammatory cell infiltration, compared with the control, saliva flow close to 60%,
the weight of mice, weight of glands and saliva flow rates in IR +ASCs and IR + BMSCs groups were
increased than IR + NS group, the index in the IR +ASCs group are more than that of IR + BMSCs, but
it could not come to normal level. There were obvious differences among four groups.
Conclusion: We proved that ASCs of mice are prior to BMSCs in multiplication capacity and cell
viability after cell passage. The mice which are irradiated by 18Gy is the ideal salivary gland radiation
damage model. Injection stem cells after irradiation could preserve salivary irradiation injury. ASCs are
more effective than BMSCs in preventing salivary gland irradiation injury, there were obvious statistics
difference between two groups.
46
Reconstruction Defects of Maxilla and Palate with Temporalis Muscle Flap after Maxilla Tumor Resection
Cheng Xiaobing, Wei Jianhua, Lei Delin
State Key Laboratory of Military Stomatology, Department of Oral and Maxillofacial Surgery, School of Stomatology, the Fourth Military Medical University, Xi’an 710032, China
Objective: To evaluate functional effects upon reconstruction defects of maxilla and palate with
temporalis muscle flap after benign or malignant tumor resection.
Methods: 45 cases with immediate reconstruction of maxilla and palate by temporalis muscle flap
from 2008 to 2013 were enrolled in the present study. 31 were malignant tumor and others were benign
tumors. 25 patients received post-operative XRT. Their appearance and recovery of speech, deglutition
function were analyzed.
Results: Among the 45 patients, all flaps were survived. Shrinkage was not significant with time
except after XRT. There were only 2 cases with oronasal fistula formation. 35 patients were satisfied
with their appearance. The average speech intelligibility was 90. 1%. 85% cases swallow well with no
fluid reflux.
Conclusion: The reconstruction of defects in maxilla and palate with temporalis muscle flap can
reconstruct the appearance, prevent Oronasal fistula formation and restore the speech/swallowing
function after operation. Comparing with free osseous myocutaneous flap, this flap represents a
relatively simple and acceptable alternative choice for maxilla reconstruction.
47
BDNF Mediated TrkB Activation Contributes to The EMT Progression in Human Salivary Adenoid Cystic Carcinoma
Jia Sen, Wang Weixi, Hu Zhiqiang, Shan Chun, Wang Lei, Wu Baolei, Yang Zihui, Lei Delin *, Yang Xinjie *
State Key Laboratory of Military Stomatology, Department of Oral and Maxillofacial Surgery, School of Stomatology, The Fourth Military Medical University, Xi’an 710032, China
2014 Xi’an Conference
153
*Correspondence to: Dr.Xinjie Yang or Pro.Delin Lei,
Purpose: Brain-derived neurotrophic factor (BDNF) and its receptor Tropomysin-related kinase B
(TrkB) are over-expressed in a series of malignancies and associated with the tumor progression.
Recent studies indicated that BDNF/TrkB axis may participate in the epithelial-mesenchymal transition
(EMT) of malignant epithelial tumours. However, the roles of BDNF/TrkB in salivary adenoid cystic
carcinoma (SACC) have been poorly investigated. The present study was aimed to investigate whether
BDNF and TrkB expression is correlated with the clinical progression of SACC and whether
BDNF/TrkB axis is associated with the EMT induction in SACC cells.
Methods: BDNF, TrkB, and E-cadherin (EMT biomarker)expression in 76 primary SACC cases and 20
normal salivary gland tissues were analyzed by immunohistochemistry. Moreover, BDNF, TrkB, and E-
cadherin expression in SACC cell lines (SACC-83 and SACC-LM) were analyzed by RT-PCR and
western blotting. The biological role of BDNF/TrkB axis in the EMT progression of SACC was
analyzed using BDNF stimulating and TrkB interruption in SACC-83 cell line. The progression of
EMT was indicated by RT-PCR, western blotting, photography, migration and invasion assays.
Results: Higher expression of TrkB (92.1%) and BDNF (89.5%) was found in SACC specimens,
which was significantly correlated with the invasion and metastasis of SACC (P<0.05). The expression
of TrkB was negatively associated with the expression of E-cadherin in SACC cases and cell lines
(P<0.05). BDNF stimulation by exogenous rhBDNF(100 ng/ml) significantly promoted the trkB
activation and the EMT progression of SACC cells. While interruption of trkB by its inhibitor, k252a
(100 nM), significantly inhibited the EMT progression of SACC cells.
Conclusion: These results suggested that BDNF mediated TrkB activation contributed to the EMT
progression in SACC. The present study demonstrated that BDNF/TrkB axis promoted the migration
and invasion of SACC via EMT. Prevention of BDNF/TrkB axis may be a potential strategy for the
treatment of SACC.
Key words: Salivary adenoid cystic carcinoma; EMT; BDNF; TrkB
48
Application of PFM Crowning Techniques To Restore Multiple Adult Stuck Teeth with Large Scattered Clearance
Guo Ling, Li Wangyang, Huang Yao
Stomatology Hospital Affiliated to Luzhou Medical College
Purpose: The purpose of this presentation is to present the results of applying PFM crowning
techniques to restore multiple adult stuck teeth with largely scattered clearance.
Method: Lack of permanent tooth germ would result in multiple adult anterior teeth stranded and wide
gaps with canine crossbite. The approach adopted to restore these stuck teeth include three steps: 1:
Correct the malocclusion by orthodontic treatment,2: Apply PFM bridge to restore maxillary teeth 3:
Apply union crown to restore deciduous teeth due to short root and wide gaps.
Results: Multiple wide scattered clearances were corrected successfully in a short period. The
deciduous tooth was kept while the gaps were closed at the same time. The function of aesthetics and
language were fully restored.
Conclusion: The combination of orthodontic treatment with restoratory treatment can be effectively
used to restore the teeth with large gap and multiple teeth stranded. It has the advantages of keeping
the deciduous tooth while closing the gaps and fully restoring the aesthetics and language.
2014 Xi’an Conference
154
49
Comparative Studies on Sensory Recovery in The Radial Forearm Flap Versus Anterolateral Thigh Flap Used for Tongue Reconstruction
Yan Zhiwei, Wei Jianhua, Sun Moyi, Cheng Xiaobing, Lei Delin
Department of Oral and Maxillofacial Surgery, the third hospital of the fourth Military Medical University, ShannxiXi’an 710032,China
Purpose: To evaluate sensory recovery in patients with tongue carcinoma surgically treated and
reconstructed in non-innervated radial forearm flap or anterolateral thigh flap.
Method: 43 cases of tongue simultaneous reconstruction by using free flap. 23 patients were
reconstructed using a radial forearm flap,and the remaining were reconstructed with an anterolateral
thigh flap. At 6 months and 8 months after treatment, all cases of tongue reconstruction were analyzed
flap sensations to touch, two-point discrimination,sharp vs dull, warmth vs cold, then were followed to
determine their swallowing and speech functional outcome.
Results: 6 flaps showed 3/4 or more area of sensory recovery, 3 flaps showed 2/4 or more area
ofsensory recovery, 11 flaps showed 1/4 or more area of sensory recovery, 3 flaps showed anesthetic in
radial forearm flap group of 23 patients; 7 flaps showed 3/4 or more area of sensory recovery, 8 flaps
showed 2/4 or more area of sensory recovery, 4 flaps showed 1/4 or more area of sensory recovery, 1
flaps showed anesthetic in anterolateral thigh flap group of 20 patients. The degree of recovery felt
different in groups of patients, but showed no statistical difference. The functional results with both
flaps were adequate, and the two groups did not differ significantly between each other for either
swallowing or speech.
Conclusion: Spontaneous recovery of flap sensation can be re-established after reconstrucation in non-
innervated radial forearm flap or anterolateral thigh flap. The swallowing and speeching recovery in
post operative patients were related with the recovery of flap sensation. sensory function with flap-
recovery. Anterolateral thigh flap with sensory nerve could be an ideal flap for tongue defects
functional reconstrtion
Key Words:Radial forearm flap;Anterolateral thighflap;Tongue defect;Reconstruction;Sensation
50
Experimental Study on Autologous of Rabbit Adipose-derived Stem Cells Transplantation
Yang Tao
State Key Laboratory of Military Stomatology, Department of The Head and Neck Tumor Surgery, School of Stomatology, The Fourth Military Medical University,Xi’an 710032,Shaanxi,China.
Objective: To establish an animal model for the injectable transplantation fat tissue transplantation and
to investigate the morphological changes of rejection after ear transplantation in rabbit.
Methods: Establishment of animal models: Rabbit ear artery end automatically, vein bifurcation of the
ear artery and the inner ear edge vein at the junction of the mid-point of a circle with a radius of 15cm .
Separated from the skin and periosteum, periosteal stripping was required in accordance with the
experimental groups, with 18 # syringe 2ml complex was transplanted to this site.Identification and
culture of rabbits fat stem cells: under sterile conditions, approximately 8 ml of fat removed from the
back of the rabbit, by using digestion centrifugation and cultured adipose stem cells at 37 ° C, 5% CO2
incubator. HE staining, the streaming detection and confirmation of pre-transplant fat stem cells is done.
To transplanted the composites into the ear of the rabbits: In accordance with the experimental
groups,we put ADSCs, AG and PRF into the ear of the rabbits. Experimental group:30 healthy New Zealand
2014 Xi’an Conference
155
rabbits,were divided into 4 groups: GroupA:AG; GroupB:AG+PRF;GroupC:AG+ADSCs(adipose-derivedstem
cells, fat stem cells);Group D: AG+ADSCs+PRF. In vivo transplantation of the injectable fat particles
complex: AG, ADSCs prf grouped by experimental transplantation to rabbit ears corresponding parts.
Data collection and statistical analysis. Results were statistically analyzed using SPSS18.0 software,
each group data were analyzed by ANOVA single factor analysis of variance, and comparison among
the four groups of survival differences were made. At month 1,3 and 6 after transplantation, the
survival rates of transplanted ears ,HE staining, rabbit ears light transmission experiments.
Results: At month 1,3 and 6 after transplantation, the survival rates of transplanted ears ,HE staining,
rabbit ears light transmission experiments,the differences of the group D and group A、B、C were
statistical significant (P <0.05)
Conclusion: The adipose granule(AG) combined with platelet-rich fibrin(PRF) and adipose-derived
stem cells(ADSCs) can improve the survival rate of transplanted fat tissue and provide experimental
basis for clinical fat transplantation.
Key words: Adipose tissue; ADSCs; AG; PRF
51
A Comparison of Health Related Quality of Life between Radial Forearm Free Flap and Pectoralis Major Myocutaneous Flap for Reconstruction in Oral Cancer Patients
Wang Weiqi, Ding Mingchao, Na Sijia
Department of Oral and Maxillofacial Surgery, Fourth Military Medical University School of Stomatology,
Purpose: This study assesses and compares the quality of life of oral cancer patients who had
undergone surgical resection and primary reconstruction of defect using either radial forearm free flap
(RFFF) or pectoralis major myocutaneous flap (PMMF).
Methods: The University of Washington of life (UW-QOL v4) questionnaire was mailed to patients
who had disease free survival for at least one year. Patient’s demographic and quality of life data were
collected and analyzed.
Results: A total of 112 questionnaires were returned (51.61%). There were significant differences in T-
stage (p=0.002), surgical time (p=0.01) and duration if hospitalization (p<0.001) between the two
groups. Patients reconstructed with RFFF had better speech, shoulder and mood domain, while
swallowing in total/subtotal glossectomy was better in PMMF group.
Conclusion: Data from this study serve as a useful resource for physicians and patients during their
discussion of reconstructive options for oral cancer.
Key words: quality of life; oral cancer; pectoralis major myocutaneous flap; radial forearm free flap;
glossectomy
52
The Clinical Application of Temperature Molding Wax in The Protheses of Soft Palate Defect
Xia Zhuo,Feng Zhihong,Zhao Yimin
Department of Prosthodontics, School of Stomatology, the Fourth Military Medical University
Purpose: To clarify the process of acquiring the impression for the soft palate with the temperature
molding wax,and to assess the clinical effect.
2014 Xi’an Conference
156
Methods: The impression for the defective soft palate cavity , which was acquired with the
temperature molding wax,was applied into the fabrication of the obturator. As the obturator was
adapted for one month,subjective perception for the nose leakage,speech intelligibility (SI) and
vowel spectral analysis were measured with and without the obturator and analyzed by the paired-
samples t test.
Results: There was significant difference in both perceptual ratings of nose leakage and SI values
between both groups(P<0.05) .For spectral analysis of the six vowels, the first three formant
frequencies had changed,and F1,F2 of [i],F2 of [u],F2 of [ü] in patients with obturator were
significantly higher than those in patients without obturator(P< 0.05).
Conclusion: The obturator,which was made from the impression acquired with the temperature
molding wax,can obviously improve the situation of nose leakage and speech disorder relative to the
velopharyngeal incompetent.
Key words: Temperature molding wax;Impression for the soft palate;Clinical assessment
53
Factors Influencing The Survival of Nonvascularized Bone Grafts Mandibular Reconstruction
Zhang Xiangyu, Tang Xiufa
Department of Head and Neck Oncology, West China Hospital of Stomatology, Sichuan University
Purpose: To evaluate factor influencing the survival rate of autogenousnonvascularized bone grafts for
mandibular reconstruction.
Methods: Fifty-six patients of West China Hospital of Stomatology from 2007 to 2013 with segmental
mandibulectomy and non-vascularized bone grafting were included. Factors including age, sex, alcohol
consumption, smoking habit, site of the defect, kinds of bone grafts, method of graft fixation, infection
of the lesion, operation duration were recorded and analyzed by Logistic regression to see their
correlation with survival. SPSS 16.0 were adopted for analysis.
Outcomes: The main reason of mandibular reconstruction is ameloblastoma(58.9%). In 49 (87.5%)
patients, the initial reconstruction was successful. The main classification of the defect is L (57.1%) and
H (30.4%), and the two kinds nonvascularized bone grafts are rib (41.1%)and iliac bone (58.9%). The
main factors that correlated with survival were smoking habit (P=0.024, Exp (B)=187.739) and
operation duration (P=0.029, Exp(B)=1.032). The other factors were not correlated with survival
(P>0.05)
Conclusion: Nonvascularized bone grafts for segmental reconstruction of the mandible is a choice of
high success rate. Smoking and long operation time could decrease its survival.
54
Large Full-thickness Labial Defects Repaired by Free Flaps: A Case-series
Li Chunjie, Han Bo, Li Yi, Li Longjiang
Department of Head and Neck Oncology, West China Hospital of Stomatology, Sichuan University
Purpose: To investigate the effect of free flaps in the reconstruction of large full-thickness labial
defects.
Methods: Patients with large full-thickness defects of the lip in West China Hospital of Stomatology,
2014 Xi’an Conference
157
Sichuan University between 2010-2014 were retrospectively reviewed. The demographic
characteristics, causes of defects, types of flaps and survival etc were recorded.
Result: A total of 15 patients received free flap reconstruction for large full-thickness labial defects
with ages between 39 and 72 and there were 11 males and 4 females. Causes of the defects were labial
squamous cell carcinoma (6), buccal squamous cell carcinoma involving the lip (4), labial malignant
melanoma (2), gingival malignant melanoma involving the lip (1), labial epithelial myoepithelial
carcinoma (1) and labial skin cancer (1). 15 radial forearm flap were used in 14 patients (with one flap
was necrosis and repaired by contralateral forearm flap), and 1 anterolateral thigh flap for 1 patient.
The follow-up period was between 6 and 42 months, with one died with disease recurrence and 1 had
recurrence but salvaged. All patients had intact oral function and good aesthetic results.
Conclusion: Large full-thickness labial defects require free-flap reconstruction. And this reconstruction
had a good practicability and aesthetic results
55
Optimal Reconstructive Strategy for Large Facial Defects: A Report of 12 Cases
Li Tang, Li Chunjie, Li Longjiang
Department of Head and Neck Oncology, West China Hospital of Stomatology, Sichuan University
Purpose: To detect the efficacy of optimal reconstructive strategy for large facial soft-tissue defect
repair.
Methods: Patients with large facial soft-tissue defects who underwent surgical treatment in Department
of Head and Neck Oncology, West China Hospital of Stomatology, Sichuan University between 2012.7
and 2013.7 were reviewed. Any patients who received optimal soft-tissue flap reconstruction were
included. Demographic characteristics, types of disease, types of defects, reconstructive strategy and
the prognosis were recorded and analyzed by SPSS 16.0.
Results: 14 patients were included with 11 males and 3 females. Causes of the defects included
malignancy resection, post-operative inflammation and trauma. 8 cases with underwent anterolateral
thigh flap reconstruction, include 5 facial basal cell carcinoma , 1 altercation defect after gingival
carcinoma surgery and 2 facial sarcoma. 1 case with facial spindle cell tumor repaired with latissimus
dorsimyocutaneous flap. For the others, 2 pectoralis major myocutaneous flap, 1 anteromedial thigh
flap, and 1 inferior epigastric perforator flap were conducted. 1 case with anterolateral thigh flap was
failed and the others all succeeded. All the patients were followed up for at least 1 year and were all
survived with good quality of life and satisfactory.
Conclusion: A choice of the soft-tissue flap reconstruction should be based on the depth, size and
location of the defects and the characteristics of flaps. Such optimal reconstructive strategy has great
value to the clinic.
56
A Case Report: Two Stage Denture Issuance Technique for Fabricating Definitive Prosthesis for Hemi-Maxillectomy
Patient.
Kunal Parekh
University of the East, manila, Philippines
Abstract- Restoring masticatory functions, phonetics , deglutition and nasal regurgitation of oral intakes
2014 Xi’an Conference
158
are challenging problems to overcome for hemimaxillectomy patients. A definitive solution for such
surgery is the fabrication of prosthesis that improvises the impression procedures to accommodate the
dimensional changes of the tissues and utilizes a two stage denture issuance technique. The 1st stage
includes chair-side soft auto-polymerizing resin material over hollow bulb obturator denture issuance.
Upon recall verifying the dimensional changes, 2nd
functional impression is recorded using the
previously issued denture as a special tray. Permanent processed soft tissue conditioner is used as liner
over the hollow-bulb obturator denture as final issued definitive and retentive prosthesis for 2nd
stage
denture issuance. Two stage denture issuance technique to fabricate a retentive, stable and functional
prosthesis for hemimaxillectomy patients with soft tissue liner material minimize dimensional changes
of the soft tissue. The defect sealing by the denture to the defect is improved and soft denture liner
provides conditioning to the underlying tissues.
57
GDF15 Is A Potential Predictive Biomarker for TPF Induction Chemotherapy and Promotes Tumorigenesis and Progression in Oral Squamous Cell Carcinoma
Zhong Laiping, Yang Chengzhe, Zhang Chenping
Department of Oral &Maxillofacial-Head &Neck Oncology, Ninth People’s Hospital, Shanghai Jiao Tong University School of Medicine
Purpose: Randomized trials have not shown major survival benefits when induction chemotherapy
plus standard therapy is compared with standard therapy alone in patients with oral squamous cell
carcinoma (OSCC). Induction chemotherapy is likely to be effective for biologically distinct subgroups
and biomarker development may lead to identification of patients whose tumors are likely to respond to
a particular treatment.
Methods: We evaluated immunohistochemical staining for GDF15 in pretreatment biopsy specimens
of 230out of 256 OSCC patients who were treated in a prospective, randomized, phase three trial on
induction chemotherapy including docetaxel, cisplatin and 5-fluorouracil(TPF).Relationship between
GDF15 intervention and cell proliferation, migration, invasion, colony formation and tumorigenicity
was analyzed using in vitro and in vivo OSCC models.
Results: LowGDF15 expression predicted a better survival in OSCC patients, especially overall
survival (P=0.049, HR=0.597) and distant metastasis free survival (P=0.031, HR=0.562). cN+ patients
with low GDF15 expression benefitted from induction TPF in overall survival(P=0.039, HR=0.247)
and distant metastasis free survival (P=0.039, HR=0.247), cN- patients with high GDF15 expression
benefitted from induction TPF in overall survival(P=0.019, HR=0.231), disease free survival (P=0.011,
HR=0.281), locoregional recurrence free survival (P=0.035, HR=0.347) and distant metastasis free
survival (P=0.009, HR=0.197). Decreased GDF15 expression in OSCC lines significantly inhibited cell
proliferation, migration, invasion, colony formation and tumorigenesis through increased
phosphorylation of AKT and ERK1/2 (P<0.05). Likewise, overexpression of GDF15significantly
promoted cell proliferation, migration, invasion and colony formation through decreased
phosphorylation of AKT and ERK1/2 (P<0.05).
Conclusion: GDF15 expression can be used as a prognostic biomarker for OSCC, and as a predictive
biomarker for benefitting from TPF induction chemotherapy.GDF15 promotes tumorigenesis and
progression through phosphorylation of AKT and ERK1/2 in OSCC.
2014 Xi’an Conference
159
58
Modified Bilateral Karapandzic Flap for Reconstruction of Large Lip Defect
Hu Jingzhou, Ye Weimin, Zhu Hanguang, Zhang Chenping, Zhang Zhiyuan Ninth People’s Hospital, Shanghai Jiao Tong University School of Medicine
Purpose: Reconstruction of lower lip defect with Karapandzic flap often leads to greater rounding of
commissure. The aim of this study was to provide a new design of bilateral Karapandzic flap, which is
useful in large lower lip defect reconstruction.
Methods: A modification of the Karapandzic lip reconstruction technique was used with an additional
incision to recruit more tissue. The esthetic outcome of the reconstruction was assessed in a 4 point
scale with regard to the shape of commissure, lip symmetry, appearance of the scar and lip projection.
The functional outcome were assessed in terms of speech, preservation of oral competence, lip sensory,
facial expression, diet and denture usage.
Results: Seventeen lower lip squamous cell carcinoma patients underwent single-stage lip
reconstruction (13 males, 4 females) with an age range of 52 to 82 years. The lip defects post tumor
resection ranged from 50% to 90% of the lower lips. All patients achieved oral competence, without
leading to greater rounding of the commissure. The esthetic outcome was considered excellent/good in
88% of cases and the reconstruction did not lead to functional impairments of speech, oral competence,
lip sensory, facial expression, diet or denture usage.
Conclusion: Modified bilateral Karapandzic flap is a reliable technique to reconstruct large lip defects
without leading to rounding of the commissure. With this technique, good esthetic and functional
outcomes could be achieved.
59
The Basis of Applicating High-frequency Color Ultrasound in Preoperative Identification and Selection Perforator of Anterolateral Thign Flap
Huang Jian, Shen Yi,Lu Linguo, Huang Guanlan,Zhou Huihong,Chen Qian-qian,Li Jun, Sun Jian
Department of Oral and Maxillofacial Surgery, College of Stomatology; Ninth People’s Hospital, Shanghai Jiao Tong University; Shanghai 200011,China
Purpose: To explore the basis of selecting the appropriate perforator vessels according to the results of
preoperative high-frequency color Doppler ultrasound and guide the anterolateral thign(ALT) flap
harvest.
Methods: From March 2013 to December 2013, 52 patients underwent preoperative ultrasound before
ALT harvest for head and neck cancer reconstruction. Using ultrasound predict the number,original,
course, location, diameter and hemodynamics of perforators to choose the better donor site for harvest
flap. The preoperatively mapped perforators were compared with the actual intraoperative findings.
Results: A total of 208 perforators were found by preoperative ultrasound in 52 patients. Finally 27
patients used ALT to reconstruction head and neck defect. There were no significant difference
between preoperative and real situation of intraoperative perforator indicators (P>0.05).
Conclusion: Preoperative mapping of perforators by ultrasound proved valuable in ALT flap design
and harvest. The basis are as follows: ① perforator diameter is the first consideration indicator;② priority to the septum or half septum perforator which is easily dissected;③ select the perforator
with high flow velocity and low resistance index;④ the pedicle length of perforator meet the needs of
reconstruction. We should make a comprehensive consideration in clinical to choose the appropriate
perforator.
Key words: Ultrasound; Anterolateral thigh flap; Preoperative planning; Basis
2014 Xi’an Conference
160
60
Functional Evaluation after Mandibular Reconstruction for Oral Cancer Patients
JiTong, Ong Huishan, Zhang Chenping, Sun Jian.
Dept. Oral&Maxillofacial– Head Neck Oncology, 9th People’s Hospital, Shanghai Jiao Tong University School of Medicine,Shanghai China, 200011
Purpose: Evaluate the functional benefits of mandibular reconstruction following segmental resection.
Methods: Objective measures of oral function were evaluated in 54 patients. The relationships among
the function and reconstruction method were evaluated.
Results: Both patients presented decreased function as compared with normal. However, bone graft
patients had significantly better measures of oral function as compared with other methods.
Conclusion: Both reconstructed and other methods patients presented with a significant functional
deficit when compared with normal, with osteocutaneous flap reconstructed patients having better
masticatory, swallowing and speech than other two groups of patients.
Key words: Mandible; Reconstruction; Functional evaluation
61
Double Barrel Vascularized Fibula Graft in Mandibular Reconstruction: A 10-year Experience with An Algorithm
Li Jun, Sun Jian, Shen Yi
Department of Oral and Maxillofacial-Head and Neck Oncology, the Ninth Affiliated Hospital, Shanghai Jiao Tong University, Shanghai, China.
Purpose: This retrospective study aims to report an algorithm to assist surgeons in selecting different
modes of the double barrel vascularized fibula graft for mandibular reconstruction.
Methods: Forty-five patients who underwent reconstruction of mandibular defects with different
modes of the double barrel vascularized fibula graft were reviewed. Our algorithm for deciding on any
one of the different modes for different mandibular defects is influenced by the factors including
history of radiotherapy, the length of mandibular body defect, and the need to preserve the inferior
mandibular border. Postoperative functional outcomes included diet type and speech, and aesthetic
results gained at post-operative 2 years. Patients with implant-borne prosthetic teeth underwent
assessment of their masticatory function.
Results: There were 4 modes of mandibular reconstruction according to our algorithm, which included
double barrel vascularized fibula graft (n=21), partial double barrel fibula graft (n=11), condylar
prosthesis in combination with partial/double barrel fibula graft (n=11), and double barrel fibula onlay
graft (n=2). Flap survival in all patients was 97.78%. Good occlusion, bony unions and wound closures
were observed in 44 patients. Eleven patients received dental implantation in the transplanted fibula at
post-operative 9~18th months. One patient wore removal partial dentures. For 11 patients with implant-
borne prosthetic teeth, the average postoperative ipsilateral occlusal force was 41.5±17.7% of the
contralateral force. Good functional and aesthetic results were achieved in 38 patients with more than 2
years follow-up, including regular diet, normal speech and excellent or good appearance, especially for
patients with dental rehabilitation.
Conclusion: Good aesthetic and functional results can be achieved after dental rehabilitation by
following our algorithm when choosing the different modes of double barrel vascularized fibula graft
for mandibular reconstruction.
Key words: Mandibular reconstruction; Double barrel vascularized fibula graft; Algorithm
2014 Xi’an Conference
161
62
Ablative Surgery of Giant Ossifying Fibroma in The Jaws Followed by Immediate Reconstruction: A 10-year Single Institution Experience
Lv Mingming, Shen Yi, Li Jun, Sun Jian
Department of Oral and Maxillofacial-Head and Neck Oncology, the Ninth Affiliated Hospital, Shanghai Jiao Tong University, Shanghai, China
Purpose: The aim of our study was to present our 10-year experience in treatment of giant ossifying
fibroma (OF), and to reveal that if good aesthetic and functional outcomes can be achieved after
ablative surgery of giant ossifying fibroma followed by immediate reconstruction.
Methods: 18 patients who underwent radical resection of giant OF in jaws and immediate
reconstruction was done using vascularized fibula flap or ilium flap between Oct 2003 and Oct2013.
Post-operative aesthetic results and functional outcomes gained at post-operative 2 years.
Results: 4 patients underwent immediate maxillary reconstruction and 14 patients underwent
mandibular reconstruction after ablative surgery of giant OF in jaws. The average length of follow-up
was 3.5 years. No recurrence was occurred in our cases. 5 patients received implant-borne prostheses
and 13 cases received removable partial dentures. Good cosmesis and function outcomes were noted in
these 18 cases.
Conclusion: It is a feasible and effective way to radical resection of giant OF followed by immediate
reconstruction and good aesthetic and functional results can be achieved after dental rehabilitation.
Key words: Giant ossifying fibroma; Radical resection; Immediate reconstruction
63
Oral Cavity Reconstruction Using A pedicled Submandibular Gland Flap: A Preliminary Report
Mubarak Mashrah, Zhou Shanghui, Ma Chunyue, He Yue, Zhang Chenping
Department of Oral and Maxillofacial–Head & Neck Oncology, 9th People's Hospital, College of Stomatology, Shanghai JiaoTong University School of Medicine, Shanghai, China
Purpose: To present our preliminary experience in the use of submandibular gland (SMG) flap in
reconstruction of defects of the oral cavity following tumor resection.
Methods: 13 patients (7 males and 6 females) with ages averaging 38 years (range from 3 to 69 years),
admitted to Oral and Maxillofacial–Head & Neck Oncology department, from July 2012 to May 2014,
were subjected to ablative surgery and reconstruction using a pedicled SMG flap. Only small and
medium-sized defects, resulting from resection of intraoral masses were included in the study. Patients
with squamous cell carcinoma were excluded from this article. All patients were evaluated in respect to
flap reliability, cosmesis, function (speech and swallowing), and donor site morbidity.
Results: All patients were followed-up for a period ranged from 3 to 22 months. Functional and
esthetic outcomes in both recipient and donor sites were satisfactory. Partial necrosis was observed in 1
patient and partial dehiscence in 2 patients. No xerostomia observed in all patients.
Conclusion: The SMG flap is a simple and reliable alternative option for reconstruction of small- to
medium-sized oral cavity defects in carefully selected cases, with better cosmetic and functional results.
Key words: Submandibular gland; Pedicled flap; Oropharyngeal reconstruction.
2014 Xi’an Conference
162
64
State of Art of Post-operative Hemimaxillectomy Rehabilitation: Clinical Evaluation on Prosthesis Supported by Zygoma Implant and Remaining Natural Teeth
Qu Xingzhou(DDS, MD, PhD),Wang Mingyi(DDS, PhD), Ong Huishan(BDS, MD, PhD),Zhang Chenping(DDS, MD, PhD)
Department of Oral Maxillofacial-Head & Neck Oncology, Shanghai Ninth People’s Hospital, Affiliated to Shanghai Jiao Tong University
Purpose: The aim of this study is to evaluate the stability zygoma implant with remaining teeth in
supporting a prosthesis for subjects who had undergone hemi-maxillectomy.
Methods: Ten patients were included in the study. Oral rehabilitations were performed with temporary
prosthesis supported by remaining teeth for the first three months. The final prosthesis will be
supported by remaining teeth and zygoma implant, prosthesis was tailored made according to
biomechanical three-dimensional finite element analysis result. The patients were assessed by referring
to prosthesis functioning scale (OFS) of the Memorial Sloan-Kettering Cancer Center. In addition, the
retention and bite force were recorded with temporary prosthesis and final prosthesis respectively.
Conclusion: The bite force was increased significantly with the support of zygoma implant. The
application of zygoma implant in the restoration of maxillary defects showed good results in functional
outcome and social acceptance.
Key words: Maxillectomy; Zygoma implant; Rehabilitation; Finite element analysis
65
Clinical Data Analysis of 200 Cases of Parotid Gland Tumor
Shen Shukun,Xu Liqun,Li Jiang,Zhong Laiping, Zhang Chenping
Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, China, 2Ninth People’s Hospital Affiliated Shanghai Jiaotong University School of Medicine, Shanghai, China
Purpose: A retrospective study of clinical data for 200 cases of primary parotid gland tumors in the
day surgery ward have been done,in order for us doctors to get some useful information of the
preoperative clinical diagnosis of parotid gland tumors to help to evaluate postoperative patients.
Methods: From May 2009 to May 2012, the medical history of patients checked by gender, age ,
clinical symptoms, imaging data , surgery, pathology , hospital costs and outcomes were analyzed and
evaluated.
Results: The data indicated that about 57% of the male, while about 53% of female, with a median age
of 55 years old were composed of the patients, of which 78 % were benign, mainly pleomorphic
adenoma. But Warthin tumor occurred in middle-aged men, with only four cases women,including 2
cases showing obvious signs of infection. Most patients had tumor with no obvious symptoms, but
clearly there was pain, swelling, uncomfortable in patients with malignant diagnosis. Imaging data
predicted the nature of the tumor in most patients and the specific distribution areas, also add some cost
to patients. The average cost of hospitalization in patients with benign tumors was about 12 to 14
thousand Yuan in RMB, while the patients in malignancy cost 18 to 25 thousand Yuan in RMB. No
patients with benign tumors recurred. And except only two cases of local recurrence, a case of lymph
node metastasis, a female case of sudden death after two days operation of Warthin Tumor, not any
other patients recurred or died. It might be due to different postoperative treatment in various types of
cancer patients.
Conclusion: The main symptoms of primary tumor of parotid gland have some relevance with
diagnosis and prognosis. In addition, poor uninsured patients can be considered to reduce the imaging
examination to reduce the burden.
2014 Xi’an Conference
163
Key words: Parotid gland tumor; Cost
66
Special Considerations in Virtual Surgical Planning for Secondary Accurate Maxillary Reconstruvtion with Vascularized Fibula Osteomyocutaneous Flap
Shen Yi, Sun Jian, Li Jun
Department of Oral and Maxillofacial-Head and Neck Oncology, the Ninth Affiliated Hospital, Shanghai Jiao Tong University, Shanghai, China.
Purpose: This paper describes our special considerations in virtual surgical planning for secondary
maxillary reconstruction with vascularized fibular osteomyocutaneous flap and our revised surgical
design for maxillary reconstruction.
Methods: Eleven patients with different maxillary defects according to Brown’s revised classification
underwent virtual surgical planning for secondary accurate reconstruction. For different horizontal
class defects, the fibular was osteomized to match maxillary alveolar arch by using the mirror image of
the contralateral alveolar ridge or the curve of mandibular arch and dentition.
Results: Maxillary reconstruction was performed with the guidance of preoperative virtual planning
and using fibular osteotomy and reposition guide templates to replicate the virtual planning
intraoperatively. Virtual surgical planning was replicated intraoperatively in all patients. The fibulae
were osteotomized into four segments in three patients with the horizontal class d2 defect and three
segments in eight patients with the horizontal class b~d1 defects, respectively. Overall success rate for
11 flaps was 100%. Good bony unions and wound closure were observed and intelligible speech was
achieved in 11 patients. Maximum incisal opening ranged from 3.0 to 4.0cm. All patients tolerated a
regular diet postoperatively. Postoperative mid-facial appearance was good in all patients.
Conclusion: We recommend that the horizontal class d defect in Brown’s revised classification of
maxilla and mid-face be divided into two subtypes according to whether it involves the contralateral
canine or not. Special considerations in virtual surgical planning are helpful to perform accurate
secondary maxillary reconstruction with vascularized fibular osteomyocutaneous flap.
Keywords: Virtual surgical planning; Secondary maxillary reconstruction; Fibular osteomyocutaneous
flap; Brown’s classification of maxilla and midface
67
Surface Modification of Silicone Rubber by Layer by Layer Assembly Method
Sun Wenling, Liu Xiaoqiu,Liang Dan,Li Shenghai
Department of Prosthetic Dentistry, Hospital of Stomatology, Jilin University, Changchun 130021, P. R. China
Purpose: In order to improve the hydrophilicity and antibacterial properties of silicone elastomers
materials, chitosan was selected to modify the surface of silicon rubber through layer by layer assembly
method.
Methods: The cleaned MDX-4-4210 silicone rubber specimen was alternately immersed in 5 wt%
Nafion solution and chitosan acetic acid solutions at room temperature for 8min and 10min respectively.
After each immersing step, the silicon sample was extensively rinsed with deionized water and dried
with a stream of N2 gas. After ten repeat cycles, the sample was dried under vacuum for
characterization. The chemical composition of the assembly layer on the surface of the silicone rubber
specimen was characterized by Fourier transform infrared (FTIR). The surface wettability was
2014 Xi’an Conference
164
evaluated by static contact angles of water on the surface of the silicone rubber at room temperature.
Results: The FTIR analysis of the samples confirmed that the assembly of chitosan and Nafion on the
surface of silicon surface is successful. The wettability of the modified surface was improved by the
assembly of hydrophilic polymer. It was noted that the water contact angle reduced from 98.4o for
virgin silicon to about 75.3o for modified silicon with only 5 assembly layers.
Conclusion: It indicated that the layer by layer assembly method could be used to modify the
properties of the silicon elastomer.
Key words: Surface modification; silicone rubber; layer by layer assembly method
68
Tendon Sheath Giant Cell Tumor (TSGCT) with Intradural Extension: Utilizing Temporal Bone for Skull Base Reconstruction in Preventing Brain Hernia
Ong Huishan, Ji Tong, Wu Yuqun, Zhang Chenping
Oral Maxillofacial-Head & Neck Surgery Department, Shanghai Ninth People’s Hospital, Affiliated to Shanghai Jiao Tong University.
Neurology Department, Shanghai Ninth People’s Hospital, Affiliated to Shanghai Jiao Tong University
Purpose: TSGCT is a rare, benign, idiopathic proliferative destructive disease of the synovium. It tends
to arise in large joints like knee and ankle and rarely in TMJ. Destructive nature of TSGCT required
immediate treatment upon diagnosis. Radical resection proved to be an excellent choice for superior
local control. However, unfavorable anatomic location of TMJ and infratemporal fossa with intradural
extension makes such a resection impractical.
Methods: Hereby, we reported a case of transcranial approach in resection for a TMJ orientated
TSGCT with intradural extension. A complex resection might require a good reconstruction.
Transposition of temporal craniotomy bone flap will be another novel state of art in reconstructing the
inferior skull base for sake of improved three-dimensional rigid architecture.
Results: Temporal craniotomy bone graft is a reliable plug for rigid support in preventing brain hernia
and correlated CSF leak. This cost-effective technique is relatively simple and applicable across all
socioeconomic strata.
Keywords: Tendon Sheath Giant Cell Tumor; TMJ; Head Neck Cancer; Skull base; Resection;
Reconstruction
69
Application of Submental Island Flaps for Reconstruction of Oral Maxllofacial Soft Tissue Defects
Wang Liang, Li Jun,Sun Jian* ,Shen Yi
Department of Oral and Maxillofacial-Head and Neck Oncology, Shanghai Ninth People’s Hospital, School of Stomatology, Shanghai Jiaotong University school of medicine,Shanghai Key Laboratory of Stomatology, Shanghai 200011,China
Purpose:To explore the effect of Submental island flap in reconstruction of maxillofacial soft tissue
defects.
Methods: We analyzed 78 cases of submental island flap,(from 2008.12 to 2011.6,)including the
indications of flap ,its harvest technology, the flap survival situation, supply area appearance, the form
2014 Xi’an Conference
165
and function of defect area after reconstruction , postoperative complications and the factors
influencing the flap survival.
Results:78 cases of Submental island flaps was used in reconstructing defects of tongue,bucca,soft
palate,mouth floor and oralpharynx.After reconstruction,the appearance and function of defects is
good,and its supply area has obtained satisfactory appearance by repairing with adjacent flap. Of 78
cases of submental island flap all survived,except 2 cases with diabetes was necrosis in the edge,among
them,1 case was got microsurgical vasovasostomy because of venous embolism、
Conclusion:The submental island flap provides a more effective and practical way for the oral and
maxillofacial soft tissue defect reconstruction in carefully selected cases.
Key words:Submental island flap;Soft tissue defects;Appearance
70
Surgical Management of Arteriovenous Malformation in Head and Neck
Wang Yan-an,Zhang Zhiyuan,Fan Xindong, Ye Weimin, Zhu Hanguang Department of Oral and Maxillofacial Surgery, College of Stomatology, Ninth People’s Hospital, Shanghai JiaoTong University School of Medicine; Shanghai 200011, China
Purpose: Arteriovenous malformation (AVM) present a significant clinical challenge to the head and
neck surgeons which is often difficult to treat and can leave large, complex defects, and often requires
a multidisciplinary team approach. The purpose of this article is to present our experience in surgical
management of AVM in head and neck, and to evaluate free tissue transfer (FTT) as a safe and effective
reconstructive technique to treat tissue defect after AVM resection.
Methods: Retrospective, single-institution case series.
Results: We describe3 patients with extensive lesions in various parts of the head and neck which
underwent radical resection following preoperative embolization, and reconstructed with free flaps.
There is no recurrence during a mean follow-up period of 5 years.
Conclusion: AVMs are uncommon and challenging lesions. Complete surgical excision following
preoperative embolisation is an effective treatment method and immediate reconstruction is an integral
part of definitive surgery for AVM. Use of FTT can ameliorate the large defects resulting from excision
of these lesions.
Key Words: Arteriovenous malformation; Embolization; Surgery; Reconstruction; Free tissue transfer
71
Illiac Crest Flap Used for Mandibular Reconstruction of Familial Gigantiformcementoma
Wang Yang, Xu Liqun, Zhang Chenping
Department of Oral and Maxillofacial Surgery, College of Stomatology, Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai 200011, PR China
Abstract:Familial gigantiformcementoma (FGC), which is generally considered benign and limited
to the facial bones, is a rare familial form of the cementomas. Here we show a patient of FGC
presented mandibular swelling from the right first molar to the left second molar. The preoperative
laboratory investigations showed bone mineral in mandible was reduced, and he suffered fractures of
tibia and femur 3 times without traumatic impacts. In case of serious complications of lower limb,
2014 Xi’an Conference
166
vascularized iliac crest flap was used for mandibular reconstruction instead of fibula flap. Segmental
mandibular ctomy from anterior to the right first molar to anterior to the left second molar was
performed with a computer simulation by Surge case 5.0 software. The defect was reconstructed with a
bone graft of 11cm which was shaped to 4 segments. Outer wedge osteotomy was performed to extend
the length of the bone graft. Thus, we performed a difficult case of mandibular reconstruction with
illiac crest flap which was preferred used when defects are ≤9 cm.
Key words:Familial gigantiformcementoma; Mandibular reconstruction; Illiac crest flap
72
Orientation Techniques in Mandibular Reconstruction
Xu Liqun,Zhang Chenping ,Sun Jian
Dept. of Oral Maxillofacial-Head & Neck Oncology, Shanghai Ninth People’s Hospital, School of Stomatology, Shanghai Jiaotong University, 200011, Shanghai, China
Abstract: Orientation of reconstructed mandible includes that of stump mandible and bone graft,
which plays an important role in the functional and cosmetic lower jaw reconstruction respectively. A
total of six types of orientation techniques for the stump of mandibles wafer based inter-maxillary
fixation (IMF), inter-maxillary rigid fixation (IRF), pre-bending reconstruction plate (PRP), external
fixation device (EFD), CAD/CAM re-position guidance (RPG) and navigation and robotic surgery
(NRS) were introduced, simultaneously PRP, pin guidance EFD, RPG and NRS techniques also
employed for bone graft. So far, NRS technique was mainly used for accurate calibration of some
orientation techniques, like RPG. Several issues affected the orientation of reconstructed mandible as
reconstruction pattern (one-stage or two-stage), defect type (HCL classification), occlusion factor and
soft tissue consideration. In secondary mandibular reconstruction, the orientation of lower jaw was a
refractory issue. Building up a stable and good occlusion relationship and respecting the acquired
condylar position of unaffected side were really important for functional consideration and long term
stability of reconstructed jaw. So sometimes orthognathic surgery should be done with the jaw
reconstruction simultaneously, like BSSO or subapical osteotomy etc. Basically orientation of bone
graft should obey the principle of mid-line accordance, reasonable width, height and projection of
lower face. In this report, literature review combined with clinical cases presentation and experience
sharing of varied orientation techniques would be performed.
Keywords: Mandibular reconstruction; Orientation technique; Stump mandible; Bone graft
73
Versatility of The Composite Lateral Arm-PCNA/PCNF Free Flap in Head and Neck Reconstruction
Yang Wenjun, Ruan Min, Zhou Shanghui, Liu Shengwen, Zhu Yun, Zhang Chenping
Department of Oral and Maxillofacial-Head and Neck Oncology, Ninth People’s Hospital, Shanghai JiaoTong University School of Medicine, Shanghai Key Laboratory of Stomatology, Shanghai, China
Purpose: The aim of this study was to introduce the reconstructive potential of the composite lateral
arm-PCNA/PCNF free flap in head and neck reconstruction.
Methods: The free lateral arm flap (LAFF) is a fasciocutaneous flap, it also may be harvested as a
composite flap, with the posterior cutaneous nerve of the arm (PCNA) and posterior cutaneous nerve of
the forearm (PCNF). These two nerves provide the potential for sensory flap, or vascularized nerve
graft. We present 23 patients, 11 women and 12 men, mean age 40.1, which operated on between June,
2014 Xi’an Conference
167
2007 and May, 2012 in whom lateral arm flaps with PCNA/PCNF were utilized. 13 cases were
employed as sensory flaps, among them 12 for reconstruction of defects of hemiglossectomy, 3 for
bucca & lower lip, 7 cases as nerve cable graft for reconstruction of facial nerve as well as facial
contour in complex parotidectomy defects. Literatures were reviewed and utility of LAFF was
discussed.
Results: As a composite flap, LAFF can offer expendable quality skin for facial &oral mucosal defects,
with PCNA for sensory flap, PCNF for vascularized nerve cable graft, or even with a segment of
bone .It’s possible for 2-team operation, easier to harvest. Furthermore, it’s no need to sacrifice main
vessels, no need for skin graft, scar formation & morbidity are minimal. Functional recovery of can be
observed in PCNA cases as sensory flap and PCNF case as nerve cable graft for reconstruction of facial
nerve.
Conclusions: For its more advantages, LAFF may be used in various anatomic defects within most soft
tissue head and neck microsurgical reconstructions in current stage. It’s successful as a single donor
site for reconstructing facial contour and the facial nerve after major ablative defects in the parotid
region. The possibility of sensory recovery through neural anastomoses and low donor site morbidity
enhances its efficiency.
74
Clinical Present of Vascular Crisis Salvaged Operations of Free Flap Reconstruction of Head Neck Region in 56 Cases
Yang Xi, Xu Liqun, Ji Tong, Zhang Chenping
Department of Oral & Maxillofacial – Head & Neck Oncology
Ninth People’s Hospital Affiliated Shanghai Jiaotong University, School of Medicine, Shanghai, China
Purpose: Vascular crisis still represents the most common complication in free flap transfer in oral and
maxillofacial and head neck reconstruction. The aim of this retrospective study was to represent
medical information of patients with vascular crisis of free flap reconstruction.
Methods: We examined the data of 56 patient cases of vascular crisis in the patients undergoing free
flap reconstruction with a microsurgical flap in our department between 2007 and 2012. We represent
medical data such as results of exploration, type of vascular crisis, initial symptom, response date of
vascular crisis after operation.
Results: 56 patients had undergone 58 vascular crisis salvaged flap operations. In which, 28 flaps were
successful, 26 flaps turned out to be failure and 4 flaps were partial necrosis (skin paddle necrosis and
flap partial necrosis). 16 flaps were arterial crisis, 36 flaps venous crisis, 4 cases no clear reason and 2
cases were partial reason. Color change was most common of initial symptom of vascular crisis. The
exploration during three days after operation had better successful rates.
Conclusions: Vascular crisis salvaged operation was a convenient and reliable method in oral &
maxillofacial-head neck reconstruction as soon as possible, which need serious nurse and clinical
experience.
75
Tongue Reconstruction with Tongue Base Island Advancement Flap
Ye Weimin, Hu Jingzhou,Zhu Hanguang, Zhang Zhiyuan
Department of Oral and Maxillofacial-Head and Neck Oncology, the Ninth Affiliated Hospital, Shanghai Jiao Tong University, Shanghai, China
2014 Xi’an Conference
168
Econstruction of medium-sized defect of tongue remains a challenge if aesthetic impairment is to be
avoided. In this study, nineteen tongue base island advancement flaps were developed to reconstruct
medium-sized defects after the tongue squamous cell carcinoma ablations: 13 cases were T1N0M0, 6
cases were T2N0~1M0. The largest size amounts to 5.4×4.8 cm (length × width), with a mean of
4.6×4.4 cm. The tongue base island advancement flap reduces the volume of tongue base without
causing function impairment of tongue. All patients recovered with good objective and subjective
speech and swallowing and aesthetics. No patient developed local recurrence or lymphatic metastasis.
The technique of tongue base advancement flap is ideal for functional and aesthetic repair of medium-
sized tongue defects after cancer ablation.
76
Comparison of Functional Outcomes in Surgically and Prosthetically Rehabilitated Maxillectomy Patients.
Manju V
Dept of Prosthodontics & Implantology Amrita School Of Dentistry Consultant Maxillofacial Prosthetist Head & Neck Institute Amrita Institute of Medical Sciences
Purpose: Surgical resection of maxillofacial tumours usually results in oro-nasal and oro-antral
communication. This in turn causes severe functional problems and affects the appearance and the
psychosocial functioning of the patient. Rehabilitation of the defect can be done by either conventional
obturator prosthesis or surgically reconstructed with a local pedicle flap, or free vascularized flap. The
main purpose of rehabilitation is to restore the functions of swallowing, speech and mastication; which
determines the quality of life of a patient.
Aim of the study: To compare the masticatory performance and swallowing function of post-
maxillectomy patients who are rehabilitated with obturator prosthesis and surgically reconstructed by
free vascularized flap combined with prosthesis.
Materials and methods: A comparative cross sectional study was used to compare the functional
outcome in post-maxillectomy patients rehabilitated with obturator or free flap combined with
prosthesis. The measurements are done for both the study group and the control group using the
following criteria:1.Mastication: Chewing ability is measured as the masticatory performance, which is
defined as the particle size distribution when chewed for a given number of strokes2. Swallowing:
Assessed by video fluoroscopic examination.
Results: The data analysis was done using the IBM SPSS software (version-20) to find the statistical
significance of function. Swallowing outcomes of two groups were not statistically significant for both
high density barium swallow (p>0.05) and low density barium swallow (p>0.05). Patients with free
flap combined with prosthesis group had better masticatory performance when compared with
obturator group.
Conclusion: Within the limitations of the study, the masticatory function in patients rehabilitated with
flap and prosthesis were better than the obturator group. With respect to the swallowing function, both
groups showed comparable outcomes.
77
Clinical Evaluation of The Effects of Different Retention Systems in Patients with Half-maxillary Defects
Ma Xiao
School and hospital of stomatology Wuhan university
2014 Xi’an Conference
169
Purpose: The aim of this study was to evaluate the clinical effects of obturators with different retention
systems (clasp, ERA, ball, bar)in patients with half-maxillary defects, including retention, stability and
durability.
Methods: 20 patients were included and divided into four groups corresponding to four systems (each
n=5). In each patient, abutment teeth adjacent to defects were splinted with crowns. Retention and
stability were evaluated by modified Kapur scale, and the durability of abutment teeth and attachments
were detected by clinical examination one year later after delivery.
Results: After delivery, retention scores of four groups were not significantly different. Stability of
clasp group and ERA group were significantly better than the other two groups. One year after delivery,
retention of clasp group decreased rapidly and were significantly different with that of ERA group.
Conclusion: Due to the resilient characteristic, the ERA attachment is a reliable choice to restore half-
maxillary defects.
Key words: ERA; Half-maxillary defects; Retention; Stability; Durability
78
Analysis of Cortical Bone on The Mandibular Body in Psychological Stressed Rats by Micro-CT
Li Qiang, Zhang Min, Liu Jiu, Chen Yongjin
Department of General Dentistry and Emergency, School of Stomatology, The Fourth Military Medical University
Purpose: To evaluate the influence of psychological stress on the bone mineral density (BMD) of
mandibular cortical bone in rats.
Methods: The adult male SD rats were randomly divided into psychological stress (PS) group, control
(C) group and foot shock (FS) group. The PS animals were placed internally in the communication box
to receive the psychological stimuli which came from their neighboring FS group rats. After observing
the behavioral changes of the PS group rats and C group rats at week 1, 2, 3, 4 and 5with elevated plus
maze test, the BMD of five regions of interest (ROIs), i.e. A, B, C, D and E, in the buccal side or
lingual side of mandible were calculated by Micro-CT.
Results: Remarkable decrease of time spent in the open arms, ratio of open arms time and ratio of open
arms entries were observed in PS group compared with C group at each time point (p<0.05), while no
significances were observed among PS groups (p>0.05). On the buccal side of mandibular body, BMD
in site D of week 5 PS group was higher than that of matched C group and week 1 PS group (p<0.05).
Similar results of BMD were obtained in site E between week 5 PS group and C group as well as week
1 and week 2 PS group (p<0.05). On the lingual side of mandibular body, the obvious alterations of
BMD were observed in sites B and C between week 5 PS group and matched C group and week 1 PS
group (p<0.05). No statistically alterations of BMD were observed in the other sites between PS group
and C group at each time point (p>0.05).
Conclusion: Psychological stress induced by communication box could result in the anxious behavior
of SD rats as well as increase the BMD of cortical bone in certain regions of the mandibular body to
some extent.
Key words: Psychological stress;Mandible;Micro-CT;Bone mineral density
2014 Xi’an Conference
170
79
Prosthesis-guided Implant Restoration of Auricular Defect Using Computerized Tomography and 3-Dimensional Photographic Imaging Technologies: A Clinical Report
Wang Shuming, Leng Xu,Zhang Yaqi,Zhang Dapeng,Wu Guofeng
Department of Prosthodontics, School of Stomatology, the Fourth Military Medical University
Purpose: The concept of “prosthesis-guided implantation” has been widely accepted for intraoral
implant placement, while it is not fully appreciated by clinicians for facial defect restoration. In this
clinical report, we utilized multiple digital technologies to achieve facial defect restoration by
prosthesis-guided implantation.
Methods: A simulation surgery was performed to remove the residual auricular tissue, and ensured the
correct position of the mirrored contralateral ear model. The combined application of computed
tomography and 3-dimensional photography reserved the position of the mirrored model, which was
evolved into the definitive implant-retained auricular prosthesis.
Surgical reconstruction of congenital microtia remained a challenge to surgeons because of the
complex shape and size of the human ear. An auricular prosthesis is a good alternative to surgical
reconstruction. Since Tjellström1 firstly reported the application of craniofacial implants-retained
prostheses for auricular defects, many clinical literatures have proved its benefits, e.g., excellent
support and retentive abilities, improvement of patients’ appearance and life quality.2-6Tjellström
Results: To enhance the implantation outcomes, computerized tomography (CT) has been used to
determine the ideal implant placement according to the cranial bone quality and esthetic
perspective.7This pre-surgical planning usually results in a resin guide template for the surgeon to
insert implants in proper positions.8-10 However, in some microtia cases, the residual ear tissue is
unfavorable for the auricular prosthesis esthetics and needs to be removed during the implantation
surgery. This operation will inevitably affect the fitness of the implant resin template in patient without
prior estimation during the surgical planning. Thus, a simulation of the resection process should be
included in the design of the guide template. Previous reports have not discussed this simulation
operation for residual auricular tissues. In past decade, CT scan11,12 and 3-Dimensional (3D)13
photographic imaging have been reported to mirror the contralateral and unaffected ear and offer
significant benefits in the design of the auricular prosthesis. Nevertheless, both of these techniques
have disadvantages if they are used individually. CT needs to expose the patient to radiation, while 3D
photographic imaging may lose some auricular data of undercut areas if certain areas cannot be directly
recorded by the lenses13. None of previous studies have combined the use of CT scan and 3-D
photography systems in the same case although they may be mutually complementary.
Conclusion: In this study, the patient underwent two scans in sequence: one CT scan at the beginning
for the position planning of the implant surgery and then a 3D imaging scan for the design of the
definitive auricular prosthesis. The two scanning data were merged perfectly, which guaranteed the
definitive auricular prosthesis in its original position of the implant planning. Moreover, advances in
Rapid Prototyping (RP) has been evolved to the development of new fabrication techniques of
maxillofacial prostheses12-14. Achievement of further automation RP technology, e.g., Selective Laser
Sintering (SLS), led to the automatic generation of solid patterns, either wax powder or polystyrene
powder. In this study, SLS machine was used to fabricate the wax pattern of the auricular prosthesis
and the resin cast of the patient’s face, which was proved to be favorable for the subsequent
maxillofacial laboratory process.
Key words: Temperature molding wax;Impression for the soft palate;Clinical assessment
2014 Xi’an Conference
171
80
Obturator Restoration of An Extensive Palatal Defect with The Assistance of Intermaxillary Traction: A Clinical Report
Zhang Dapeng, Wu Guofeng*, Ding Yin
Department of Prosthodontics, School of Stomatology, the Fourth Military Medical University
Purpose: Palatal defects secondary to the treatment of tumor, trauma, and congenital factors are
commonly seen in Prosthodontic clinics accounting for 1-1.5% of outpatients in China. The defects not
only result in significant dysfunction of speech, mastication and deglutition to the patients, but also
cause severe disfigurement, thereby impairing the level of self-esteem of these patients. Therefore, the
treatment goal of restoring acquired palatal defects is to obtain normal function and appearance. The
goal of this report is to present the restoration of a significant defect of the right maxilla acquired from
previous hemimaxillectomy using obturator denture following intermaxillary traction in a 65-year-old
woman.
Method: Treatment began with intermaxillary traction to rectify the palatal inclination of the remaining
teeth, and to obtain a favorable occlusal relationship. The remaining teeth were then splinted by metal
ceramic connected crowns. A partial denture obturator was then employed to restore the defect and the
patient was able to achieve a stable and satisfactory occlusion and facial profile.
Results: During the recall appointments (2 week, 6 weeks, and 3 months), the prosthesis demonstrated
continued serviceability, and the patient was pleased with both function and esthetics. Mastication and
pronunciation capabilities were greatly improved and follow-up training by a Speech Pathologist
maximized the potential of the obturator prosthesis. The facial support and profile was also improved.
Conclusion: This clinical report describes a multidisciplinary approach to restoring an acquired palatal
defect complicated by the palatal inclination of the residual maxilla. The rectification of the
misdirection of the remaining alveolar bone and teeth using intermaxillary traction was essential to
optimize support, stability and function of the obturator prosthesis. The obturator prosthesis eliminated
the confluence of the nasal and oral cavities and thus, the ability of pronunciation, mastication, and
deglutition was improved to the greatest extent.
Key words: Palatal defect; Intermaxillary traction;Obturator
81
Mechanical Properties and Color Stability of Nano-oxides Pigmented
Maxillofacial Elastomer
Han Ying, Zhao Yimin
Department of Prosthodontics, School of Stomatology, the Fourth Military
Medical University
Purpose: The objective of this study was to evaluate the effect of 2 nano-oxides (commercial UV-light
protection) combined with silicone pigments on the mechanical properties and color stability of a
silicone elastomer before and after artificial aging.
Method: Two types of nano-oxides [Nano Zinc oxide (ZnO) and Nano Titanium oxide (TiO2)] were
combined at 1%, 2%, 3% concentrations with A-2000 silicone elastomer. Silicone intrinsic pigments
were added (control = no pigments). All specimens were tested.
Both mechanilcal properties and color measurement were recorded before and after aging in an
artificial aging chamber at 450 kJ/m2. CIE L* a* b* values were measured by spectrophotometer.
2014 Xi’an Conference
172
Hardness (ASTM D2240), tensile strength (ASTM D412), tear strength (ASTM D624) and elongation
were measured using a universal testing machine. For each property, 3-way ANOVA and Fisher's PLSD
test were performed to determine if there were statistically significant differences (p<0.05).
Results: After artificial aging, the changes of tensile strength, elongation, tear strength and hardness
were showed in the Figures. There was no significant difference between no pigments groups and
mixed pigments groups (P>0.05) when mixed with nano-oxides;
For color stability,ᅀ E* values of the mixed groups of all concentration of nano-oxides were
significantly below the 50:50% acceptability threshold when compare to control groups. Overall, TiO2
provided better protection to this silicone than ZnO after artificial aging.
Conclusion: Nano-oxides improve color stability and mechanical properties of A-2000 silicone
elastomer after subjected to artificial aging.
Key words: Mechanical Properties; Nano-oxides; Color Stability; Maxillofacial Prosthetic Elastomers
82
Effects of Speech after Partial Glossectomy with Reconstruction Using Radial Forearm Free Flap
Na Sijia, Wang Weiqi, Jin Wei
Department of Oral and Maxillofacial Surgery, School of Stomatology, the
Fourth Military Medical University
Objective: The purpose of this study was to investigate the effects of glossal soundsafter partial
glossectomy with reconstruction using radial forearm free flap (RFFF).
Methods: The methods of evaluation consisted of scores for intelligibility of 399Chinese syllables and
3 groups of glossal sounds. The glossal sounds, based on palato-lingual contact (lingogram), were
useful to evaluate function of the respective parts of the tongue.
Result: One patient who had had a partial glossectomy and resection of the floor of the mouth achieved
an overall score of 80.5% one year postsurgery, and his glossal sounds were also excellent. Three
patients who underwent removal of the floor of the mouth and hemiglossectomy, excluding the root of
the tongue, had overall scores ranging from 41.3% to 85.6%. Two of these had particularly low scores
for the glossal sounds produced with the rear part of the tongue, and this suggested the necessity for
suspension slings to prevent depression of the reconstructed tongue and the floor of the mouth. The
hemiglossectomy with partial mandibulectomy had an acceptable score of 67.4%. Other patients
without reconstruction using RFFF had lower scores for the limit of tongue moving.
Conclusions: The glossal sounds produced with the rear part and the blade of the tongue often tended
to improve postsurgery.This study also shows the speech of patients undergoing partial glossectomy
reconstructed with RFFFimprove significantly.
Keywords: Free radial forearm flap; Glossal sounds; Glossectomy.
2014 Xi’an Conference
173
Session V – Chemo-radiation – Morbidities and strategies to minimize them
1
The Effect of X- rays on Rabbits’ Infraorbital Nerve.
Chiang Tingyen,Ren Weihong
Capital Medical University
Purpose: This study aims to observe the effect of X- rays on infraorbital nerve of rabbits.
Methods: New Zealand rabbits were randomly divided into four groups, among which there were a
control group without X-ray irradiation operation and three irradiation groups exposure to 10, 20, and
30 Gy X-ray irradiation, respectively ( n = 6 in each group). All the rabbits were sacrificed three
months following X-ray irradiation operation and the infraorbital nerve of rabbits were extracted. The
ultrastructure changes of rabbits’ infraorbital nerve were investigated by using electron microscope.
Results: In control group, nerve fiber structure is clear, and myelin sheath is concentric layered
arrangement, and the axon is clear visible transverse microtubule and neurofilament. The cytoplasm,
extracellular matrix and cell organelle structure of Schwann's cell is clear.10 Gy group had no obvious
difference compared with the control group. In 20 Gy group, partial myelin appear vacuolar
degeneration, and some myelin appeared delaminateIn 30 Gy group, vacuolation in myelin, unclear
lamellar structure, degenerated axons, and serious morphological change of myelin were observed.
Conclusion: X-ray is detrimental to the infraorbital nerve of rabbits, resulting in the injury of myelin
and axon, and the change is positively related with the does.
Key words: Infraorbital nerve; Radiation injury
2
Reconstruction of The Cranio-maxiilofacial Soft Tissue Defection with Vascularized Free Rectus Abdominismusculocutaneous Flap and Scalp Expansion: a case report
Lin Chongxiang, Tu Chengwei, Shao Xia, Zheng Shunyou
Department of Oral and Maxillofacial Surgery, the First Affiliated Hospital of Wenzhou Medical University
Purpose: Presented is a case of a 45-year-old male patient with defection of cranio-maxillofacial soft
tissue caused by a serious traffic accident.
Methods: After debridement of the necrotized soft tissue, we used a vascularized free rectus
abdominismusculocutaneous flap to reconstruct the maxillofacial soft tissue defection.
Results: And two soft tissue expanders were implanted under the scalp 12 days later, while the
transplanted rectus abdominismusculocutaneous flap survived. Cicatricial massive scalp defects were
repaired by the expanded flaps in secondary operation five months later.
Conclusion: Our experience indicates that reconstruction of cranio-maxiilofacial soft tissue defection
with rectus abdominismusculocutaneousflaps and scalp expansion is a suitable, cosmetically acceptable
method.
3
Evaluation of Oral Health Before and After Radiotherapy in Patients
2014 Xi’an Conference
174
Undergoing a Protocol of Dental Hygiene.
Bellia E; Menardi P; Furnari A; Carossa S; Gassino G.
Department of Surgical Science, CIR Dental School, Prosthodontic Section, Turin, Italy
Purpose: Aim of the study is to evaluate the role of professional and domestic oral hygiene sittings in
preventing collateral effects of radiotherapy.
Methods: The sample includes 26 patients affected by head and neck carcinoma, recruited before
proceeding with radiotherapy; Patients are given two questionnaires, to evaluate their knowledge about
oral hygiene manoeuvres and radiotherapy collateral effects.
Before and after radiotherapy patients undergo: periodontal evaluation by means of the plaque index
and PSR. basal and induced saliva flux evaluations.
Results: In 80% of the cases plaque index drops to less than the threshold value of 40% .PSR values
remain unvaried to level 2, only one case improves to level 1.In 90% of the cases saliva is found to be
much thicker after radiotherapy. Before radiotherapy, saliva flux is more or equal to 4ml, while after
radiotherapy values decrease to 3.5 ml. In most cases ph tends to become more acid after radiotherapy,
while buffer capacity doesn’t show a definite trend before and after radiotherapy.
Conclusion: In the light of these preliminary data we can infer that dental hygiene plays a significant
role in monitoring and preventing radiotherapy collateral effects, thus maintaining acceptable oral
health conditions throughout the whole treatment period.
Key words: Dental hygiene; Radiotherapy.
4
Assessment of Shoulder and Neck Dysfunction and Functional Status Post Radiotherapy/Chemotherapy in Head and Neck Cancer Patients: A Pilot Study
Paramjot, Sandeep, Aashima
Method: The Purpose of this descriptive study was to explore the disabilities of neck and shoulder and
to check for the functional status for 20 outpatients (who met inclusion and exclusion criteria) after a
course of radiotherapy (RT) /chemo-radiotherapy (CXRT) for cancers of Head and Neck. Sampling
method used was convenience sampling. Time period of the study was March 2014-April 2014. Data
was collected in follow up cases from 1 month to 30 months from Christian Medical College and
Hospital , Ludhiana, Punjab post RT/CXRT patients using GUSS (Gugging Swallowing Screen), NDI
(Neck Disability Index), DASH (Disabilities of Arm, Shoulder and Hand),Lung expansion and
Cervical ROM
Results: The mean age of the study was 58.7 years (59) and the number of male patients (85%) were
more than female patients (15%). Significant result was found when compared between DASH and
NDI (0.522) and GUSS and NDI. In NDI 75% patients were found to have disability (mild to severe)
and in GUSS 100% were found to have dysphagia (slight to severe) and in case of DASH 80% were
found to have slight to severe disability. Flexion and rotations of the neck were also significant with
NDI. In this study the patients having decreased chest expansion were 85% and 15% were found to
have normal chest expansion.
Conclusion: The study was tested and accepted the hypothesis that there is a significant difference in
Neck disability and swallowing performance of the subjects. The participants had greater risk of
aspiration and aspiration related effects. Hence, Selected Interventions such as Swallowing exercises
like Shaker exercise and Hyoid lift manoeuvre and positioning during swallowing can be recommended
for the patients. For the neck and shoulder disability various neck and shoulder exercises can be taught
to the patient as per to increase the ability of the patient and increase the level of performance.
Key words: Head and Neck Cancer; Radiotherapy; Chemotherapy; NDI; DASH; GUSS; Lung
2014 Xi’an Conference
175
expansion; Goniometry
5
PH-Responsive Micelles Constructed by PCL-PEG-PCL Triblock copolymer Via Oxime Linkage for Anticancer Drug Delivery
Li Xiao
Department of Oral and Maxillofacial Surgery, The First Affiliated Hospital of Harbin Medical University
Purpose: To obtain a pH-responsive Doxorubicin drug delivery system.
Methods: A novel and well-defined pH-triggered backbone-cleavable triblock copolymer was
successfully synthesized by hydroxyethyl terminal with oxime linked poly (ethylene glycol) (OAPEG-
OH) ligating with polycaprolactone (PCL). And the triblock copolymer was characterized using fourier
transformed infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), and gel permeation
chromatography (GPC) analysis. Doxorubicin (DOX), a model anticancer drug, was encapsulated into
PCL-PEG-PCL micelles.
Results: Benefiting from its amphiphilic structure, PCL-PEG-PCL copolymer can self-assemble into
micelles in aqueous solution, which was demonstrated by transmission electron microscopy (TEM) and
dynamic light scattering (DLS). The cytotoxicity of the PCL-PEG-PCL micelles was evaluated by
MTT assay against NIH/3T3 normal cells. The drug release assay result showed that the DOX release
from the micelles was significantly accelerated at mildly acidic pH of 5.0 compared to physiological
pH of 7.4, demonstrating the pH-responsive feature of the drug carrier with oxime linkages. Besides,
the anticancer activity of DOX-loaded micelles was evaluated by MTT assay against HeLa cells.
Conclusion: Results demonstrate that micelles self-assembled from PCL-PEG-PCL
triblockcopolymers are promising vehicles for acid-triggered delivery of hydrophobic drugs.
Key words: pH-responsive; Micelles; Oxime linkages; Drug delivery system
6
Sequential Release Chemotherapeutic Drug with Polymeric Delivery System for Oral Squamous Cell Carcinoma Therapy
Liu Bing
Department of Oral and Maxillofacial Surgery, The First Affiliated Hospital of Harbin Medical University
Purpose: We developed a ROS-responsive effective drug delivery system to overcoming multidrug
resistance (MDR) of oral squamous cell carcinoma (OSCC).
Methods: The ROS-responsive crosslinked polymeric micelles (Cinnamaldehyde- Loaded HPG-7-
ethyl-10-hydroxyl-camptothecin, CA-LoadedHPG-SN38) were successfully prepared by the self-
assembly of amphiphilic HPG-SN38 and CA. And amphiphilic HPG-SN38 that conjugate via a
thioether chain copolymer was characterized using fourier transformed infrared spectroscopy (FTIR),
nuclear magnetic resonance (NMR), and gel permeation chromatography (GPC) analysis. CA-Loaded
HPG-SN38 Micelles was characterized using transmission electron microscopy (TEM) dynamic light
scattering (DLS), critical micell concentration (CC) and Ultra Violet(UV).
Results: The drug release assay result showed that the SN38 release from the micelles was
2014 Xi’an Conference
176
significantly accelerated at the high level of ROS concentration. The anticancer activity of CA-loaded
HPG-SN38 micelles was evaluated by MTT assay against HN-4,MCF-7 and A549 cells. The IC50 of
CA-loadedHPG-SN38 was significantly reduced. The flow cytometry and confocal laser scanning
microscopy (CLSM) measurements confirmed that the CA-loadedHPG-SN38 could be internalized by
HN-4 and MCF-7 cells efficiently and release CA and sn38 inside the tumor cells to enhance the
inhibition of cell proliferation
Conclusion: In conclusion, the prodrug CA-loadedHPG-SN38 formed nanocapsules responsive to
tumor ROS heterogeneity, releasing the parent drug SN38 via enhanced hydrolysis due to ROS-
oxidation of the linker, giving rise to high in vitro cytotoxicity therapeutic activity. The nanocapsules
had sizes good for tumor targeting via the EPR effect. Excellent CA-loadedHPG-SN38 provide a
favorable platform to construct smart drug delivery systems (DDS) for cancer therapy.
Key words: ROS-responsive; Micelles; Drug delivery system
7
A study of postoperative radiotherapy effects on vascularized nerve graft for facial nerve repair in a rabbit model
Zhu Yun, Liu Shengwen, Zhou Shanghui,Yu Zhiwei, Hu Haisheng, Sun Jian, Zhang Chenping, Yang Wenjun.
Department of Oro-maxillofacial Head and Neck oncology, Ninth People’s Hospital, College of Stomatology, Shanghai Jiaotong University School of Medicine, Shanghai Key Laboratory of Stomatology. Shanghai 200011, China
PURPOSE: This study intends toto study the impact of radiotherapy on vascularized and non-
vascularized facial nerve repair.
Methods: 12 New Zealand white rabbits were used in this study, upper buccal branch of facial nerve of
both side would be cut off, forming a 2 cm defect, one side took the great aricularnerve and associated
vascular pedicle to repair facial nerve defect, the other side took the central aricularnerve directly to
repair facial nerve defect. Divided into 2 groups 1 month after operation, RT group and control group,
radiotherapy planned to bilateral nerve transplantation site. Dose was equivalent to 60 Gy of each side.
Results were evaluated with analysis of upper lip performance, electrophysiologic monitoring,
histological studies, toluidine blue staining and electron microcopeelectron scanning 3 months after
operation.
Results: All the rabbits appeared lip asymmetry after operation, At 4-month following facial nerve
repair, facial nerve function recovery was observed .In RT group, pathological changes were viewed as
surrounding tissue fibrosis, nerve cell shrinkage, schwann cells hurt and demyelinating. Comparing
with control group, postoperative radiotherapy had no obvious effect on facial nerve regeneration and
facial function recovery, 3 months after radiotherapy, the upper lip recovery rate of RT group was
slower than control group. In RT group, comparing VNG with FNG, nerve function recovery rate of
VNG was significantly faster than FNG. The difference of the nerve conduction velocity and potential
volatility was statistically significant.
Conclusions: The postoperative radiotherapy had no obvious effect on the function of facial nerve
graft. In RT group, the result of nerve regeneration and functional recovery of VNG was better than
FNG. VNG could reduce adverse impacts of radiotherapy on the facial nerve regeneration and facial
function recovery.
Key words: Facial nerve; Vascularized nerve graft; Animal model; Peripheral nerve regeneration;
Postoperative radiation
8
2014 Xi’an Conference
177
Implants in Irradiated Tissues.
Division of Advanced Prosthodontics, School of Dentistry, UCLA
Shahi P, Sung E, Beumer J
Irradiation of head and neck tumors predispose to changes in bone, skin, and mucosa, which affect the
predictability of osseointegrated implants. Initial success requires initial implant anchorage and
immobilization, the formation of a clot between the surface of the implant and the osteotomy site,
release of growth factors, angiogenesis and migration of mesenchymal stem cells to and deposition of
bone on the surface of the implant. However these biologic processes may be compromised or absent in
patients exposed to high dose radiation, and as a result, anchorage of implants in bone is probably
mechanical as opposed to biological. The purpose of this presentation is to review the literature in this
field and describe the current view of when and whether it is appropriate to use implants in these
patients.
9
Clinical Analysis of Two Removable Prosthetic Material to Repair the Unilateral Maxillary Defect.
Wei Zening, Li Yanan, Li Chuanjie
Department of Stomatology, Chinese PLA General Hospital.
Purpose: To explore the clinical efficacy of unilateral maxilla resection repaired by two kinds of
removable prosthetic materials .
Methods: 5 patients whose unilateral maxilla was removed because of tumor, with mouth nasal cavity
and orbital floor reserved were selected. Removable obturators (made of plasticized poly and silicone
rubber) were applied to repair their maxillary defects. The biocompatibility of material, patients’
satisfaction, comfort, voice clarity , masticatory function and surface cleanliness were assessed 1 month,
3months and 6 months after restoration.
Results: Both of these two kinds of materials can restore the facial aesthetics and oral physical function
in some degree, and significantly improved the patient’s voice clarity and efficiency of eating. Silicone
rubber has better biocompatibility, bio-security, patient comfort and simulated effect. While the surface
cleanliness and the aging time of plasticized poly (methyl methacrylate) plastic is superior to silicone
rubber .There was no significant difference between the patient voice clarity and chewing efficiency.
Conclusion: Two type of removable prosthetic materials have their own advantages and disadvantages
in the restoration of unilateral maxillary defects, doctor should choose it in accordance with the clinical
treatment plan and the preference of the patients.
Key words: Removable prosthetic materials; Maxillary defect; Silicone rubber; Plasticized poly
10
Dosimetric distribution to tooth-bearing regions and osteoradionecrosis following intensity-modulated radiation therapy for oropharyngeal cancer
YL Seetoh, RS Lee, H Hansen, N Lee, E Riedel, J Huryn, CL Estilo
National Dental Centre Singapore
Purpose: The aims of this paper were (1) to determine the dosimetric distribution to tooth-bearing
areas of the maxilla and mandible among patients receiving IMRT for BOT cancer or tonsillar cancer;
(2) to report the prevalence of ORN in the study cohort; and (3) to investigate the relationship between
dose and the confirmed areas of ORN.
2014 Xi’an Conference
178
Methods: 255 consecutive patients with oropharyngeal carcinoma who were treated with IMRT at
Memorial Sloan Kettering Cancer Centre (MSKCC). The diagnosis was tonsillar cancer in 125 and
BOT cancer in 130. All patients were treated with IMRT using a dose painting technique. All patients
were prescribed with a mean dose of 70 Gy to the gross tumor volume. The tooth-bearing regions of the
maxilla and mandible were divided into 5 regions: ipsilateral molar (IM), contralateral molar (CM),
ipsilateral premolar (IPM), contralateral premolar (CPM) and anterior (ANT), giving a total of 10
distinct regions. The individual segments were manually contoured by two investigators using MSKCC
proprietary contouring software. The dose delivered to each segment was then calculated and dose-
volume histograms were generated for the maxilla and the mandible. A chart review of the 255 patients
was conducted to identify those who developed ORN. The areas of confirmed ORN were then
contoured and the mean and maximum doses to these areas calculated.
Results: In patients with BOT cancer, the ipsilateral side received significantly higher doses than the
contralateral counterpart (p <0.0001). Overall, T stage was significantly associated with higher dose in
all contoured regions for both maxilla (p<0.0001) and mandible (p < 0.002). Furthermore, in patients
with more advanced (T3 and T4) tumors, the entire mandible received maximum doses above 50 Gy.
Among patients with tonsillar cancer, as with the BOT patients, higher doses were delivered to the
molar than to the premolar and anterior regions in both maxilla and mandible. Unlike the BOT subset,
in the tonsillar cancer subset the dose to the maxilla was similar to mandible in both mean and
maximum doses (Table 3B). The doses were significantly higher on the ipsilateral side than on the
contralateral side for both jaws (p < 0.0001) (Table 3). T stage was also significantly associated with
higher mean and maximum doses delivered to the maxilla (p< 0.0001) (Figure 5A; Table 3). The
ipsilateral molar of the maxilla and mandible received the highest maximum doses, and these doses
were only marginally associated with T stage (p=0.05). ORN developed in 12 of the patients, 6 each in
the BOT cancer and tonsillar cancer subsets (Table 5). This puts the incidence of ORN in the present
cohort at 5.3% (12/255). All cases of ORN developed in the mandible: 8 in the posterior ipsilateral
molar (IM) region, 1 on the contralateral molar (CM) region and 1 in the ipsilateral premolar (IPM)
region. The ORN developed spontaneously in 10 patients and developed after post-radiotherapy dental
extractions in 2 patients. The average maximum dose to the volumes with ORN was 74.8 Gy (range
70.5 -0.8 Gy) and the average mean dose was 64.4 Gy (range 57.5-76.0 Gy).
Conclusion: In our study, the anatomical locations of different types of cancer resulted in significantly
different dose distributions in the jaws (Table 4) with several regions of the jaw typically received
maximum doses in excess of 50 Gy. The results of this study show which tooth-bearing regions are at
risk of receiving high doses for patients with base of tongue and tonsillar cancers. For BOT subset,
these were the IM and CM for the maxilla and the whole mandible for especially for T3/ T4 tumors.
For the tonsillar cancer subset, this was the IM and CM for the maxilla and the IM, CM and IPM for
the mandible. This might be useful in planning for pre-radiation extractions when detailed simulation
plans are unavailable.
Key words: IMRT; Intensity modulated radiotherapy; Dosemetric distribution; Osteoradionecrosis;
Oropharyngeal cancer
11
Dental Implant Survival in Irradiated Maxilla: a Systematic Review
of the Literature
Min Tian, Guofeng Wu, Chufan Ma, Haibo Wu, Jihua Chen
Department of Prosthodontics, School of Stomatology, Fourth Military Medical
University, 145 West Changle Road, Xi’an, China
Objective: The aim of this study was to evaluate the implant survival in the maxilla after radiotherapy
in oral cancer patients.
Methods: A comprehensive research on MEDLINE, PUBMED and EMBASE was conducted for
articles published between January 1990 and July 2014 to identify literature presenting survival data on
2014 Xi’an Conference
179
the topic of dental implants in Maxilla patients who received radiotherapy for head and neck cancer.
References of relevant studies were also searched. Screening, data extraction and quality assessment
were conducted independently and in duplicate. Random effect model was used to calculate the
survival rate of dental implant in irradiated Maxillary jaw and the 95% confidence interval.
Results: The survival rate of dental implant in irradiated Maxillary jaw was 75.2%(95% confidence
interval:68.2%,81.1%); the survival rate of HBO therapy group was 81.8%(95% confidence
interval:66.7%,91.0%), the survival rate of non-HBO therapy group was 73.5%(95% confidence
interval:65.3%,80.4%); the survival rate of > 3 years follow-up group was 75.7%(95% confidence
interval:68.0%,82.0%), the survival rate of < 3 years follow-up group was 76.3%(95% confidence
interval:55.6%,89.2%).There were no significant differences between HBO therapy group and non-
HBO therapy group (P >0.05), > 3 years follow-up group and < 3 years follow-up group (P >0.05).
Conclusions: It is a feasible way to use dental implant in irradiated Maxillary jaw. Only 5 studies on
HBO therapy were included and the date indicated that HBO therapy did not significantly improve the
implant survival rate. The survival rate didn’t reduce significantly with the time.
Keywords: Radiation therapy; Survival rate; Implant; Maxil
2014 Xi’an Conference
180
2014 Xi’an Conference
181
2014 Xi’an Conference
182