2019 BROCHURE
Leading manufacturer of blown fibre and ducted network solutions
Fibre solutions for: Fibre-to-the-Home Multiple Dwelling Units (MDU) In-Building Fibre to the cabinet Campus/Business Park Mobile Telephone Mast Connections City/Metropolitan Long-Distance Telemetry & Intelligent Transport systems 5G & Wifi antennas Wind farms Overhead Cable TV Security
FibreFlow from EMTELLE
II
FibreFlow from EMTELLE
This document is protected by copyright © Emtelle UK Limited [2018]. The products depicted are protected by intellectual property rights. Any unauthorized copying of this document or of our products is prohibited and Emtelle UK Limited will take action to prevent any infringement of its rights and to claim damages for the loss that it suffers. At Emtelle we strive to improve our products every day and therefore strongly suggest that all new orders and specifications be confirmed by your Emtelle representative. The current specifications may be different from those listed in our latest catalogues, which are limited by publication date. For the latest specifications please visit our website at www.emtelle.com or contact your Emtelle representative.
Table of contents
FibreFlow – the optimal FttX blown fibre solution . .1FibreFlow the optimal FttX solution . . . . . . . . . . . . . . .2 Fibre-to-the-Cabinet (FttC) applications . . . . . . . . .2Fibre-to-the-X (FttX) . . . . . . . . . . . . . . . . . . . . . . . . . . .3Fibre-to-the-X (FttX) . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Multiple Dwelling Units (MDU) . . . . . . . . . . . . . . . .4 Aerial applications . . . . . . . . . . . . . . . . . . . . . . . . .4Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Campus/Business Park applications . . . . . . . . . . .5 Mobile 5G, Wifi Connections & Smart Cities . . . . .5 Telemetry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5FttX Installation Techniques . . . . . . . . . . . . . . . . . . . . .6 FibreFlow FttX Global Projects . . . . . . . . . . . . . . . . . .7
Pre-Cabled Solutions . . . . . . . . . . . . . . . . . . . . . . . . .9Pre-cabled solutions . . . . . . . . . . . . . . . . . . . . . . . . . .10QWKconnect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11QWKlink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14RTRYVA - Retractable Fibre System . . . . . . . . . . . . .16PIFU - Pre installed Fibre Unit . . . . . . . . . . . . . . . . . .18MULTIFU Pre-installed Fibre Tube Bundle . . . . . . . .19
FibreFlow Fibre Products . . . . . . . . . . . . . . . . . . . .21FibreFlow Microcable Fibre Unit (FU) . . . . . . . . . . . .22FibreFlow Blown Fibre Micro and Mini Cable . . . . . . .25FibreFlow Blown Fibre Micro and Mini Cable . . . . . . .26
FibreFlow Tube Bundle – Blown Fibre . . . . . . . . . .27Microduct / Primary tube sizes . . . . . . . . . . . . . . . . . .28Tube Bundle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29FibreFlow Tube Bundles . . . . . . . . . . . . . . . . . . . . . .30Direct Bury metal free (DBmf) - Thickwall . . . . . . . . .31Direct Bury (DB) - with foil . . . . . . . . . . . . . . . . . . . . .34Direct Bury metal free (DBmf) - Traditional . . . . . . . .35Direct Install (DI) - with Foil . . . . . . . . . . . . . . . . . . . .36Direct Bury Termite Resistant (DBT) . . . . . . . . . . . . .37Direct Install metal free (DImf) . . . . . . . . . . . . . . . . . .37Aerial Tube Bundle . . . . . . . . . . . . . . . . . . . . . . . . . . .38Universal Drop Tube . . . . . . . . . . . . . . . . . . . . . . . . .39Tight Protected Microduct . . . . . . . . . . . . . . . . . . . . . . 39Low Fire Hazard (LFH) . . . . . . . . . . . . . . . . . . . . . . . .40Specialist Applications . . . . . . . . . . . . . . . . . . . . . . . .42Pre-cabled ducts and microducts . . . . . . . . . . . . . . . .46Loose Protected Microduct . . . . . . . . . . . . . . . . . . . .47Storage and Handling . . . . . . . . . . . . . . . . . . . . . . . .48
Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49Connectors John Guest . . . . . . . . . . . . . . . . . . . . . . .50Microduct Connectors . . . . . . . . . . . . . . . . . . . . . . . .53
Emtelle Solutions Team . . . . . . . . . . . . . . . . . . . . . . .54
FROM EMTELLE FibreFlow from EMTELLE
11
FibreFlow – the optimal FttX blown fibre solution
Easier, quicker, more efficient and extremely flexibleFibreFlow technology is an integral part of FttX solutions . The FibreFlow strain-free method of installing fibre optic cables and fibre bundles in microducts rely on the flow of compressed air passing over the entire length of the cable to create a fluid drag, which gently carries the cable down the microduct .
Suitable for numerous applications and customers, FibreFlow has become the preferred installation method for those who value reliability, cost-effectiveness and flexibility. The development of FibreFlow has revolutionised the design of fibre optic products, resulting in a new generation of minicables that take up less room and need no heavy reinforcement . In addition, these developments have reduced the costs of the fibre products and the microducts into which they are installed.
Emtelle’s FibreFlow system is suitable for a wide range of applications, including:
��Fibre-to-the-Home��Multiple Dwelling Units (MDU)��In-Building��Fibre to the cabinet��Campus/Business Park��Mobile Telephone Mast Connections��City/Metropolitan��Long-Distance ��Telemetry and Intelligent Transport systems
� Rail � Motorway��5G & Wifi antennas��Wind farms��Overhead��Cable TV��Security
Emtelle also have a wide selection of pre-fibred and cable solutions available for the FttX market .
FibreFlow from EMTELLE
2
AccidentI90 closed at J32
AccidentI90 closed at J32
AccidentI90 closed at J32
PoP
Windfarm
Traffic ControlCenter
Railway Station
Refinery
PoP
PoP
PoP
PoPPoP
Micro Cable FU
Lock & Block KitDirect Buried Connector
Direct Buried Connector
Loose/tight Protected Microduct
Street Cabinet
Point of Presence
Access Chamber
Tube Distribution
Closure
Installation Equipment
Tools
Fibre Products
FibreFlow the optimal FttX solution
Loose Protected Microduct
H branch closure
Access Chamber
Pre-Connect FibreTight Protected
MicroductFibre
Products
Tight ProtectedMicroduct
AccessChamber
H-Branch
DBmf Heavy-Wall Bundles
Protected Connector
Customer Connection Point
Tube Distribution Closure
1:32 Splitter DomeCustomer
Connection Point-Fixed Fibre Drop
Customer Point-Upgradeable Fibre Drop
(pre-installed)
Customer Lead-in Point
Indoor Tight Protected Microduct
InternalY Branch
MDU Cabinet
Tight Protected Microduct
Duct
Installation Equipment
QWKconnectPre-connectorised
fibre unit pre-installed in subduct
QWKlinkPre-connectorised
fibre unit
Street CabinetRack Mount Splitter
32/26 HDPE Drop Duct
Minicable
Fibre Unit
Drop Tube FTTH
FTTC
MDU/CAMPUS
Fibre-to-the-Cabinet (FttC) applicationsEmtelle leads the industry in the access part of fibre-based networks with small- and large-diameter FttC solutions that allow the installation of tube bundle networks from the Point of Presence to individual homes, businesses, street cabinets, etc. Emtelle not only lead the industry in providing access network solutions, they are leaders in the delivery of high fibre count mini cables in the feeder section of the network . Our standard offering is pre-installed loose and tight protected microduct which can be supplied in various duct sizes and microduct configurations. For customers with special requirements i .e . thermal stability or full water blocking capabilities, special fixed protected microduct products can be provided .Greater flexibility means that new customers can be connected quickly, for immediate revenue generation .
Batch Num
ber (I.D)
1310 IL: SC 0,10dB LC 0,1
1550 IL: SC 0,10dB LC 0,1
1626 IL: SC 0,10dB LC 0,10 0 0
FROM EMTELLE FibreFlow from EMTELLE
3
AccidentI90 closed at J32
AccidentI90 closed at J32
AccidentI90 closed at J32
PoP
Windfarm
Traffic ControlCenter
Railway Station
Refinery
PoP
PoP
PoP
PoPPoP
Fibre-to-the-X (FttX)
Cabinet
Blowing equipment
Duct
Tube BundleFibre products
Tube DistributionClosure
ConsumerLead-in Point
32/26 HDPE Drop Duct
1:32 Splitter Dome
Fibre Products
PoP
Tight ProtectedMicroduct
Pre-Installed Microcable FU
Key benefits of Emtelle’s FibreFlow FttX solution�� Enhanced design flexibility�� Improved network scalability and reliability �� Reduced CapEx and OpEx for investor/operator�� More lucrative return-on-investment po-tential�� Range of innovative pre-installed and pre-fitted components�� Quicker and less intrusive network modifi-cation/maintenance
Customer Connection Point
Splicing Unit
Internal Y Branch
Tight Protected Microduct
Loose Protected Microduct
Loose Protected Microduct
To Gantry / Station
Splice Dome
Tube Distribution Closure
DBmfDrop Tube
1DB,5/3.5mm
32 - 26 mmCable in Duct
Fibre-to-the-Home (FttH) applicationsEven a modest mix of popular broadband services can involve transfer speeds beyond traditional infrastructures. Optical fibre, however, is up to the task, and when deployed with FibreFlow can be installed easily and cost-effectively . Tubes can be laid fibre-ready along with other utility lines. This reduces build costs and the cost of redundant fibre provision. Fibre bundles can
simply be blown in to supply service when it is required .
Blowing equipment
MOTORWAY
TELEMETRY
WINDFARM
Refinery
FttH will be a key enabler for 5G networks . Emtelle’s solutions offer capability for future expansion for 5G.
FibreFlow from EMTELLE
4
Indoor TightProtected Microduct
MDU Cabinet
PoP
Tube DistributionClosure
InternalY Branch
Fibre Node
Tight ProtectedMicroduct
CustomerConnection
Point
InstallationEquipment
Splicing Unit
InternalY Branch
CustomerConnection
Point
Pre-Connect Fibre
Customer Connection Point - Fixed Fibre Drop
Customer Connection Point -Upgradeable Fibre Drop
(pre-installed)
Medium Rise MDU(Direct Microduct Routing)
High Rise MDU(Blown & RTRYVA Solution)
Low Rise / Garden Style MDU
(Rapid Fit Installation)
QWKlink pre-connected fibre
Pre-connectorisedDome Closure 16mm mini trunking
solution to feed fibre horizontally to apart-
ments (from splicing unit)
Universal drop tube- to feed fibre to apartments from the outside of the
building
1 LFH drop duct if there is access to existing ducts or roof space
or
Fibre-to-the-X (FttX)
Figure-8 Tube Bundle
Fibre Products
J-Hook bolt-throughSuspension
Clamp
PoP
Bolt
Bracket
Drop tube
Cable ClampAC68L 260 for GRP only
Dome ClosureMid-Blow
CustomerLead-In Point Branch Closure
Multiple Dwelling Units (MDU)To provide for a variety of MDU scenarios, Emtelle offers three solutions: Shared Microduct Routing, Direct Microduct Routing and Rapid Fit Installation. The first two solutions are ideal for use in modern high-rise applications. With Shared Routing, fibre is led up to each level, and then split to each customer connection point via a splicing unit. With Direct Routing, fibre is routed straight to each customer connection point . With this combination of solutions available, investors in the network can be sure that precisely the right technology is being deployed for their particular building . Rapid Fit Installation is ideally suited for smaller, typically less modern, MDUs. Here, a Fixed Fibre Drop or an Upgradeable Fibre Drop is plugged onto the customer’s existing equipment. This procedure can be finished very quickly and with minimum disruption to the customer premises, ensuring that high-speed access can be made available literally at a snap .
RTRYVA Vertical fibre Pull back solution & EMU Box
AC68L 500 for GRP only
AC10 320 for Steel only
LFH Microduct to enable blowing of fibre bundle directly to apartments
from outside (or from the basement)
Cable Clamp
OUTDOOR PE MICRODUCT12 FIBRE BASE UNIT
STEEL STRENGTH MEMBERS
Aerial applicationsEmtelle’s Aerial blown fibre solution is based on its renowned FibreFlow technology and products . Modern advances in fibre product design and installation practices have revolutionized blown fibre aerial installation, producing impressive practical, technical and economic benefits without the need for digging. As a result, aerial installation is becoming recognized as a quick and cost-effective alternative, especially in cases where an existing aerial infrastructure (for example, phone lines or electrical cables) is already in place. Emtelle’s Aerial blown fibre solution is ideal for a wide range of customers, including municipalities, housing developers, utility companies, network operators, cable TV operators, universities, hospitals .
FROM EMTELLE FibreFlow from EMTELLE
5
Applications
AccidentI90 closed at J32
AccidentI90 closed at J32
AccidentI90 closed at J32
POPTraffic Control
Center
City
Refinery
Windfarm
Loose Protected Microduct
TelemetryEmtelle’s FibreFlow solution, can be used in a number of telemetry applications such as: �� wind farms�� oil/gas pipelines�� utilities�� intelligent transport systems�� housing projects
32 - 26 mmCable in Duct
PoP
Railway Station
PoP
PoP
PoPPoP
Campus/Business Park applicationsThe university, the business park, the hospital, the military base – wherever people work together, they need to communicate. To maximise the potential of ever more sophisticated digital technology, high-bandwidth is essential . This requires an adaptable, robust infrastructure – the kind you can easily achieve with FibreFlow .
Mobile 5G, Wifi Connections & Smart CitiesEmtelle FibreFlow solutions can also cater for Fibre to the Mast for localised Wifi and 5G/LTE for mobile signals . Emtelle can even incorporate power and fibre in a single cable, which allows Emtelle’s range of products to cater for smart city applications .
Duct Plug
4 way 18/14 or similar with 288f cable.
Dome Splice Enclosure
2 Way DB5/3.5mm
1 1
12
3
4 1
1 1
Closure 4A
To Railway Station
Drop Tubes
Splice Dome
H Branch Closure
DBmf
Microcable Fibre UnitDrop Tube
Optical Fibre Mini Cable
or Fibre unit
MicroductTubeAssembly
Cable Clamp
For more information on the Emtelle solutions specifically developed for these installation techniques, visit www .emtelle .com
FibreFlow from EMTELLE
6
FttX Installation Techniques
Direct Burial
Utilisation of Existing Ducts
Inside Sewer
Mole Ploughing
Aerial
Narrow Trenching
Semi Aerial/FaçadeSlot Cutting / Microtrenching
A Choice of Installation TechniquesThe popularity of FttX means that fibre is being installed in an increasingly wider range of applications . Different scenarios require different approaches, so Emtelle offers a variety of installation techniques. We have considerable experience in all these techniques, and can work with customers both to determine the most appropriate option and to implement it successfully .
FROM EMTELLE FibreFlow from EMTELLE
7
Emtelle has successfully met the challenges of a wide range of FttX projects . For further information on FibreFlow FttX Global Projects, please refer to www .emtelle .com .
In Building�� 2000 Commercial Buildings in Singapore�� AMP Buildings throughout Australia�� Canary Wharf, London
�� ABSA Bank, Pretoria, South Africa�� International Finance Centre, Dubai, UAE�� Auckland Sky Tower, New Zealand
�� Commercial Buildings, Taiwan�� Australian Federal Police�� Fiona Stanley Hospital, Perth�� High Rise, Doha, Qatar�� High Rise Commercial and residential Bangkok, Thailand
Campus/Business Park�� Changi Airport(T3 & T1 upgrade), Singapore�� Dublin Airport, Ireland�� Johannesburg International Airport, South Africa�� Manchester University, UK�� Balsburg Building Zurich Airport, Switzerland�� Kuala Lumpur International Airport, Malaysia�� Medunsa University, South Africa�� San Antonia, Texas, USA�� Dunedin University, New Zealand�� Perwaja Steel Industrial Complex, Malaysia
�� Birmingham University, UK�� Manchester Airport, UK�� Curtin University, Australia�� University of Western Australia�� Melbourne Airport, Australia�� Brisbane Airport, Australia�� Royal Children’s Hospital, Melbourne, Australia�� Royal Bolton Hospital Trust, UK�� Exxon Refinery, Fawley, UK�� York University, UK�� Galway Business Park, Ireland�� Shetland Council, UK�� Industrial Estate, Thailand�� Queens University, Belfast, UK�� North Staffordshire NHS, UK
�� Salford Royal NHS, UK�� Leeds Metropolitan University, UK�� Lancashire Police HQ, UK�� VA Grand Junction Hospital, CO, USA�� VA Orange County Hospital, CA, USA�� Dallas Fort Worth Airport, TX, USA�� Kansas City Airport, KS, USA�� Ohio State Prison, OH �� Ankara, Turkey�� Eastern Goldfields Prison, Australia�� Midland Health Campus, WA
Fibre-to-the-Home / MDU�� Nuenen, Netherlands�� Binningup, Australia�� Säffle, Sweden�� Hillsboro, Oregon, USA�� Syd Energi, Denmark�� Tre-for Bredbaand, Denmark�� Energi Midt, Denmark�� Gothenburg, Sweden�� Kalgoorlie, Australia�� Södertälje, Sweden�� Eindhoven, Netherlands�� Örnsköldsvik, Sweden�� Monterrey, Mexico�� Enschede, Netherlands�� Delft, Netherlands
�� Squire Creek, USA�� Leonie Hill, Singapore�� El Rio, Arizona, USA�� Lulea, Sweden�� Chunghwa Telecom, Taiwan�� Hau Hin, Thailand�� Maldives�� High Rise Apartments, Taiwan�� West Whitlawburn, UK�� Hilversum, Netherlands�� Amersfoort, Netherlands�� Dordrecht, Netherlands�� Soest, Netherlands�� Alpen aan de Rijn, Netherlands�� Skövde, Sweden�� Ystad, Sweden
�� Rutland, UK�� Alston Community Broadband, UK�� Beaverton, OR, USA�� Homestead, VA, USA�� Skopje , Macedonia�� Lodz, Poland�� Neumünster, Germany�� Hamburg Eimsbüttel, Germany�� Cologne, Germany�� Sasbachwalden, Germany�� Gemeinde Heinzberg, Germany�� Montego Bay, Jamaica�� B4RN, Lancashire, UK�� Toronto, Canada�� Oldenzaal, Netherlands�� Almelo, Netherlands
Ports�� Long Beach, CA, USA�� San Diego, CA, USA�� Port Hueneme, CA, USA�� Oakland, CA, USA�� Port Rupert, Canada
Fibre-to-the-Curb/(City)�� Olympic Games, Athens�� Lenowisco, USA�� Christchurch City Council, New Zealand�� Electricity Ashburton, New Zealand�� North Power Whangarei, New Zealand�� Grand Junction, CO, USA
�� Starrett City, NY, USA�� Sunset Communications, VA, USA�� Marshall City, LA, USA�� Pax River, VA, USA�� City of Weston, FL, USA�� Yangon City Network, Myanmar�� Micro-trenching Fibre to Mast and building, Kuala Lumpur, Malaysia
Long Distance�� Janaf, Croatia�� Mandurah Rail, Australia�� Gateway Upgrade Project, Brisbane, Australia�� Perth - Bunbury Highway, Australia�� Reid Highway, Perth, Australia�� Southampton City Council, UK�� Makati to Nasugbu Backbone Link, Philippines�� Sea cable landing sites, Cyprus�� Tenerife�� Don Muang Toll Way, Bangkok, Thailand�� SA Power Communications, Australia�� Tollway Projects, Philippines
Military�� Type 45 Destroyer, Royal Navy�� Army and Air Force Bases, Australia�� ADF, Enoggera, Australia�� RAAF Edinburgh, South Australia�� RAN Frigates, Australia�� RAAF Amberly, Australia�� Dover Air Force Base, USA��
Miscellaneous�� Aerial Projects, Sweden�� Skellefteå Windfarm, Sweden�� London 2012 Olympics, UK�� Manchester Metro, UK�� Trump International Golf Club, Aberdeenshire, UK�� Volvo Ocean Race, Galway, Ireland�� Electranet, Adelaide, Australia �� Energy Australia, NSW�� Gotthard Railway Tunnel, Switzerland�� Fibre backbone, Guam�� 4 .5km bridge, New York State, USA�� BTS MRT Bangkok, Thailand
FibreFlow FttX Global Projects
Kuala Lumpur Monorail
Spring Creek, NY
DNU Hospital Denmark
Olympics London
Borders Rail
Throgs Neck bridge, NY
FibreFlow from EMTELLE
8
FROM EMTELLE FibreFlow Pre-cabled solutions
9
Pre-Cabled Solutions
FibreFlow Pre-cabled solutions
10
Pre-cabled solutions
Emtelle can manufacture a variety of pre-installed fibre in tube solutions to ensure the installation process is simple, quick and cost effective .
QWKconnect
Pre-connectorised Fibre Microduct System
See page 11
MULTIFU
Retractable Fibre Tube Bundle
See page 19
PIFU
Pre-installed Fibre UnitSee page 18
Retractable Fibre SystemSee page 16
Pre-installed cable in ducts & microducts
Cable in Duct
��Reduced CAPEX on installation equipment
��Reduced skill set and training required for the install
��High speed installations
��Cost and space effective
��Futureproof
��Upgradeable
Have the benefits of blown fibre without the blowing or splicing
LC/APCConnectors
Ø 1.1 mm
DuctThis product can be made with
SC connectors or LC connectors in the tube
QWKconnectFibre in duct
Other options - QWKdrop & QWKlink - PIFU - HomeConnect
90° bendStraight duct
Swept tee
External Termination Box
FDN – Fibre Distribution Node
Install scenario
FROM EMTELLE FibreFlow Pre-cabled solutions
11
QWKconnect, is effectively pre-connectorised fibre in a Fibreflow microduct that is pre-installed during the manufacturing process . This means that microducts from 5mm OD can be installed between the cabinet / POP / Splice enclosure and the customer premises with the QWKlink fibre already installed, eliminating blowing costs and splicing costs for the operator . Our QWKconnect MDU for internal use is manufactured out of LFH material giving excellent performance in a fire scenario.
Why use QWKconnect�� Various options which can be installed underground (direct buried and ducted), along walls, overhead, including wifi antennas, or indoors for MDUs�� Fibre pre-installed can be connectorised at one end or both ends�� SC and LC APC connector options available
�� No blowing or fibre splicing required for the customer drop�� Extremely small storage area for excess fibre�� Reduced skill set & training required for the install�� Massively reduced capex for installation equipment�� Cost (and space) effective compared to similar products in the market
Pre-connectorised fibre unit in microduct
Scan the QR-code with your smartphone and watch the QWKconnect video .
External
Internal
QWKconnect QWKconnect
LC
LC
LC
LC
SC
SC
FibreFlow Pre-cabled solutions
12
Product Code 73551The connectorised FST closure from HellermannTyton has been designed to offer engineers in access networks the benefit of speed and ease when connecting customers to their fibre optic network. The FST is fitted with a front mounted adaptor plate suitable for 8 x SC simplex or 8 x LC duplex adaptors . The closures single splice tray can accommodate up to 12 splices with the rear of the tray providing suitable storage area for loop through applications . The 13-port base enables feeder cables to be installed as cable end or mid span and has separate R ports for drop cables .
Features:�� Quick and simple customer connec-tion or disconnection �� Uses HellermannTyton’s Cablelok - 100% Mechanical seal �� Maximum 12 fibre splice capacity
�� 12 round ports and 1 oval port �� Suitable for LC Duplex or SC Sim-plex adaptors �� Cablelok compatible for all port sizes �� Quick release cover
Product Code 73552The connectorised FDN closure from HellermannTyton has been designed to offer engineers in access networks the benefit of speed and ease when connecting customers to their fibre optic network.
Features:�� Quick and simple customer connection or disconnection�� Pre-fitted splitter cassette options �� Uses HellermannTyton’s Cablelok - 100% Mechanical seal �� Ruggedised closure tested to 6m head of water �� Maximum 180 fibre splice capacity �� 58 round ports and 1 oval port �� Fibre storage basket for loop through applications
�� Hellipse NZDF SE-A trays �� Suitable for LC Duplex or SC Simplex adaptors �� Maximum 12 splices per tray without double stacking �� Splitter accommodation �� Cablelok compatible for all port sizes �� Quick release cover �� Optional flash test valve and/or grounding feed-through
Accessories – AdaptersDescription Product Code
73559 LC – Duplex73558 SC - Simplex
Accessories – Splice TraysDescription Product Code
12 x Heatshrink 7147912 x ANT 71480
Accessories – AdaptersDescription Product Code
73559 LC/APC – Duplex73558 SC/APC – Simplex
Product Code 73906The Fibre Facade Enclosure provides a cost effective secure solution for installing pre-terminated drop cables in Fibre to the Home (FTTH) applications . It can be mounted aerially or at ground level to deliver stored fibre to the customer premises .
Façade Closure Fibre Storage
FST Connectorised Closure
Scan the QR-code with your smartphone and watch the
FST connectorised closure video .
FDN Connectorised Closure
Scan the QR-code with your smartphone and watch the FDN connectorised closure video .
Accessories
FROM EMTELLE FibreFlow Pre-cabled solutions
13
FibreFlow Customer Connection Enclosure (CCE)
FibreFlow Customer Connection Point
FibreFlow Cabinets
Product Code 74433The Customer Connection Enclosure (CCE) has been designed as a Building Entry Point (BEP) to provide a fibre termination and network demarcation point external to the connected premise in a Fibre to the Home (FTTH) network. In addition to providing an external test point the enclosure will also store up to a maximum of 50m of 1.1mm cable.
The CCE has an IP54 sealing performance with 6 entry/exit ports at the bottom of the enclosure which is suitable for cables or ducts up to a maximum diameter of 7mm. A loop through facility allows for single fibre elements to be removed and spliced whilst the remaining fibres can be fed on to the next connection point. A single port in the rear of the closure allows for fibre to be passed through the wall into the customer premises . The CCE is the same width as a brick blow-out cover which will mask any unsightly bricks damaged by drilling through the wall from the inside of the house .
Mechanical fixing is provided to secure all incoming/outgoing cables/ blown fibre ducts and to provide strain relief where necessary. Internal positive fibre management and fibre retention clips maintain a minimum 30mm bend radius throughout .
The CCE manages up to 2 SC simplex or LC duplex adaptors and has features to secure a maximum of 4 x 3A splices.
The lid is hinged allowing quick and clear access to the internal fibre for splicing and termination and the lid can be replaced if damaged .
The CCE can be supplied pre-loaded with fibre adaptors and pigtails as required.
�� 2 x SC Simplex or LC Duplex Adaptors�� Fibre Management for 4 x 3A splices�� Integral positive fibre management and storage capacity�� 6 inbound/outbound access points�� Through the wall capability�� Loop through facility�� Tamper-proof fitting - captive screw and nut�� IP54 Rated
Emtelle have cabinet solutions that are used by a wide range of national operators, please contact us for more details .
Product Code 74428Customer Connection Point providing a fibre termination point inside a residential property. The customer connection point comes complete with a pre-installed pigtail, connector and adaptor .
Features �� Body Manufactured from Self-extinguishing ABS UL-0�� Can be fitted directly to a wall or a standard UK 1-gang backbox�� Compact design�� Available space to accommodate second pigtail with connector and adaptor�� Room to accommodate 2x Fusion Slices�� Room for excess fibre storage�� Company Logo to suit
Façade Closure Fibre Storage
Cabinet
GS150 blowing machine
QWKlink pre-connectorised fibre ELF
LC/APC or SC/APC(PC also available)
7/3.5mm BFT
Blow direction
Install scenario
Batch Num
ber (I.D)
1310 IL: SC 0,10dB LC 0,11550 IL: SC 0,10dB LC 0,11626 IL: SC 0,10dB LC 0,10 0 0
Batch Number (I.D)
1310 IL: SC 0,10dB LC 0,1
1550 IL: SC 0,10dB LC 0,1
1626 IL: SC 0,10dB LC 0,1 000
LabelsA flag type label with the following information shall be wrapped around the fibre at the SC end.1 . Emtelle product code2 . Description and Length3 . Product Batch / Tracking number4. Insertion and return loss figures at 1310nm
and 1550nm for each Fibre Connector
LC/APC Connector
See page 12 & 13 for QWKlink solution accessories
FibreFlow Pre-cabled solutions
14
Pre-connectorised fibre unit
Emtelle’s pre-connected fibre bundle allows for fibre connectors on both ends, eliminating the need to splice fibres for FTTx drop applications. The Emtelle QWKlink range of fibre is supplied with an LC Ferrule which can be blown into microducts with a minimum inner diameter of 3.5mm.The LC/APC connector can be field assembled after installation . The opposite end (house connection) is terminated with an SC-APC connector . The pre-ferruled fibre can be blown into microducts that have been directly buried, installed into ducts, installed along walls or into overhead Blown Fibre networks . (Please see Emtelle’s QWKDrop range of products). These pre-connected fibre bundles can be blown from 25 metres upto over 1000 metres in new and existing Blown Fibre routes.
Why use QWKlink�� Can be connectorised at one end or both ends �� SC and LC APC connector options available �� No fibre splicing required for the customer drop �� Extremely small storage area for excess fibre �� Reduced skill set & training required for the install �� Massively reduced capex for installation equipment �� Cost (and space) effective compared to similar products in the market
The little brother of QWKconnect; only the pre-connectorised fibre
For use within Existing Ducted NetworksQWKlink QWKlink
FROM EMTELLE FibreFlow Pre-cabled solutions
15
GS150 Blowing Machine
Product Code 72662The GS150 has a compact battery powered motor to push the fibre unit and micro cable into various sizes of micro duct . When combined with compressed air the GS150 will quickly and efficiently install fibre at speeds of up to 115m/min. The unit’s machined aluminium construction provides a lightweight profile with long life and durability . The GS150 comes supplied with a carry case for ease of transportation and storage .
Max Air Pressure 15 Bar
Material & Technical dataMachined aluminium bodyElectronic compact motor for drive wheel (single roller drive)Duct range: 5-8mmFibre range: 1 .0-2 .5mmInstallation speed: 115m/minWeight: 2 .27kgPower: rechargeable batteryPush force: 20NAir pressure: 15bar maxForward and reverse installationTorque adjustment
Product Code Description
Blowing Machine72662 GS150 MICROBLOWER KIT-EMTELLE
Microduct Pack Assembly72786 GS150 Small Hose72888 5 .0mm Duct Pack Assy (includes 10 O-Rings)72889 6 .0mm Duct Pack Assy (includes 10 O-Rings)72890 7 .0mm Duct Pack Assy (includes 10 O-Rings)72891 8 .0mm Duct Pack Assy (includes 10 O-Rings)
Microduct O-rings72892 KIT,O-RING-5 .0MM DUCT (12PC) Additional72893 KIT,O-RING-6 .0MM DUCT (12PC) Additional72894 KIT,O-RING-7 .0MM DUCT (12PC) Additional72895 KIT,O-RING-8 .0MM DUCT (12PC) Additional
Accessories
Packaging and Labelling
Product Models 72662 72663EU
GS150 Blowing Unit Yes Yes120V Version Yes No240V Version No Yes
5mm Duct Packs Yes Yes1 .25mm & 1 .75mm Cable seal
packs Yes Yes
2 x 12V Batteries (Plus Charger) Yes No2 x10.8V Batteries (Plus Charger) No Yes
Hard Shell Carry Case Yes YesTripod Yes Yes
Product overview
Product Code Description
Cable Seals72896 1 .25mm (includes 6 Seals)72897 1 .50mm (includes 6 Seals)72898 1 .75mm (includes 6 Seals)72899 2 .00mm (includes 6 Seals)72900 2 .25mm (includes 6 Seals)72901 2 .50mm (includes 6 Seals)72902 Blanks (includes 6 seals)
Other Accessories72903 Tripod with mount72904 Smooth Belt (Orange)72905 Belt Small Groove (Orange)72906 Belt with Large Groove (Green)72907 AC Inverter Option72908 DC Battery Option 10 .8V - INTL (CE Approved)72909 DC Accessory Auto Plug Power Cord (10 M)72910 Flow Regulator Kit73623 Fibre Guides
All products suitably packaged in recyclable materials and clearly labelled with Emtelle Product Code and Description where possible .
Features�� 2 x battery operated (2 batteries – one can be used while the other charges) �� Small and lightweight �� Compatible with new Emtelle compressor range �� Less electronics than previous machines – less maintenance �� LCD screen, featuring speed, distance and ma-chine distance counter �� Easy to read air pressure gauge �� Built in clamping system with interchangeable seals �� Quick release air connections
Install scenario
Access Chamber or
Street cabinet
Branch connection
RTRYVA product
Existing buried duct
Customer Connection EnclosureSee page 13
Customer Connection Point
See page 13
LFH Drop Tube4mm, 5mm
or 7mm
Drop tube
FibreFlow Pre-cabled solutions
16
RTRYVA - Retractable Fibre System
48f 24f
12f
The Emtelle RTRYVA product range is available for installation in Direct Buried applications and for Indoor applications . These products are small and lightweight and can be supplied with 12, 24 or 48 fibre tubes within the duct. Each fibre tube can have 2 or 4 fibres. The RTRYVA products can be window cut at the customer drop location, a fibre tube retracted, then pushed / pulled into an Emtelle drop tube, to the customer’s premises .
Our RTRYVA MDU for internal use is manufactured out of LFH material giving excellent performance in a fire scenario.
Please contact us on info@emtelle .com for more information .
RTRYVA
Product Code Description Supply
Length Fibre type No. fibres Drum Type Material Spec Ref.
63129 RTRYVA 15/9mm 2500M G657A2 12x 2FU 1 .4D HDPE CP2053
62664 RTRYVA 15/9mm 2500M G657A2 24x 2FU 1 .4D HDPE CP1954
63131 RTRYVA 15/9mm 2000M G657A2 48x 2FU 1 .4D HDPE CP2509
RTRYVA MDU
63280 RTRYVA 8/5mm 2020M G657A2 12x 2FU 1 .4D PEFR CP3157
63281 RTRYVA 15/9mm 2020M G657A2 24x 2FU 1 .4D PEFR CP1955
63256 RTRYVA 15/9mm 2020M G657A2 48x 2FU 1 .4D PEFR CP1955
Scan the QR-code with your smartphone and watch the RTRYVA video .
External
Internal
Accessories
FROM EMTELLE FibreFlow Pre-cabled solutions
17
Emtelle have designed and constructed the EMU box to suit many requirements for FTTH and FTTP projects . It has been designed for bend insensitive fibre management and is versatile to give many different uses .
The EMU box is a compact multipurpose closure that can accommodate both patch connections and splices (Fusion and Mechanical) . The EMU boxes are also commonly used to breakout and distribute the fibres from Emtelle’s Ø15mm RTRYVA solution.
Product Code Description IP-Rating Seals Colour Spec Ref.
72792 EMU RTRYVA Closure BLACK 4x 3-8mm Seals IP-67 4x 3-8mm double seal Black UK_DS_72792
72793EMU RTRYVA Closure BLACK
2x 3-8mm double seals + 2x 15mm single seals
IP-67 2x 3-8mm double seal + 2x 15 single seal Black UK_DS_72792
73176 EMU RTRYVA Closure CREAM / LFH 4x 3-8mm Seals IP-67 4x 3-8mm double seal Cream UK_DS_72792
73177EMU RTRYVA Closure CREAM / LFH
2x 3-8mm double seals + 2x 15mm single seals
IP-67 2x 3-8mm double seal + 2x 15 single seal Cream UK_DS_72792
73194EMU RTRYVA Closure GREY
2x 3-8mm double seals + 2x 15mm single seals
IP-67 2x 3-8mm double seal + 2x 15 single seal Grey UK_DS_72792
Other seal sizes may be available on request .
RTRYVA EMU Box
RTRYVA Cutting Tool
Product Code Description Spec. Ref.
73768 RTRYVA TOOL TO MAKE WINDOW CUT TO 8 & 15MM UK_DS_73768
71787 RTRTYVA TOOL TO MAKE WINDOW CUT 15 &20MM UK_DS_71787
73654 RTRYVA EXTRACTION TOOL UK_DS_73654
73768 73768 71787
Install scenario
Access Chamber
Customer Connection Enclosure
See page 13
x48 PIFU
Street Cabinet
Customer Connection Point
See page 13
FibreFlow Pre-cabled solutions
18
PIFU - Pre installed Fibre Unit
Emtelle can supply a large variety of protected microducts (refer to page 20 for details) which can be pre-installed with various types of Emtelle Microcable FU (with or without a low friction sheath) . PIFU is an ideal product for FTTH drops to homes as it is quick to repair and replace the fibres in an event where physical damage has occurred. The products in the table below are an example of the products we can supply. Other products may be available, please contact us on info@emtelle .com for further information .
Product Code Description
Low friction
FU sheathType Colour Standard
Length
60963 8/3.5mm + 2 PIFU MM OM3 x 1000m yes MM OM3 blue, orange
1000m8476 8/3.5mm + 2 PIFU G652d x 1000m yes G652d blue, green
8497 8/3.5mm + 4 PIFU G652d x 1000m yes G652d blue, green
60982 8/3.5mm + 2 PIFU G657A1 x 2000m no G657A1 blue, green 2000m
Install scenario
Access Chamber
Customer Connection Point
Customer Connection Enclosure
See page 13Customer Connection Point
See page 13
Drop Tube
Branch / Connection closure
Street Cabinet
Multifu product Multifu internal
FROM EMTELLE FibreFlow Pre-cabled solutions
19
MULTIFU Pre-installed Fibre Tube Bundle
Assembly of PE microducts each containing a fibre unit. The assembly (bundle) is surrounded by an outer sheath that is suitable for direct burial in suitably prepared ground . This product reduces the need to use specialist blowing equipment when connecting customers . MULTIFU products can be partially or fully populated depending on customer uptake .
Why use Multifu?�� Reduce CAPEX per home passed and home connected on Day 1 �� Easy to install, assemble and use products �� Reduce the skill requirements �� Minimise installation time and reduce failure rate �� Increase roll out speed �� Lower upgrade and maintenance costs for the life time of the network �� Adapted for low cost construction techniques �� Narrow trench �� Shallow depth burial�� Available with G652D/G652A1/G652A2 fibres
Product Code Description Microduct
SizeSupply Length Drum Type
Product weight per metre gms
Bundle ODmm
Generic Specification
61495 12DBmf MULTIFU 2FU G657A1 4/2 .1mm 500 1 .4D 151 18 .2 CP1531
61613 12DBmf MULTIFU 2FU G657A2 4/2 .1mm 500 1 .4D 151 18 .2 CP153162277 12DBmf MULTIFU 4FU G657A1 4/2 .1mm 800 1 .4D 151 18 .2 CP153161496 24DBmf MULTIFU 2FU G657A1 4/2 .1mm 500 1 .4D 323 26 .0 CP153261614 24DBmf MULTIFU 2FU G657A2 4/2 .1mm 500 1 .4D 323 26 .0 CP153262276 24DBmf MULTIFU 4FU G657A1 4/2 .1mm 800 1 .7D 323 26 .0 CP1532
MULTIFU
Scan the QR-code with your smartphone
and watch the MULTIFU video .
External
Internal
FibreFlow Pre-cabled solutions
20
FROM EMTELLE FibreFlow Fibre Products
21
FibreFlow Fibre Products
Emtelle FibreFlow ABF (fibre bundle) products are the subject of United Kingdom patents GB2409908C & GB2409909C, European patents EP1600801B1 & EP3073305B1, European patent application EP3270203A1 and corresponding patents in other countries . All rights reserved .
Patent
FibreFlow Fibre Products
22
Microduct size mm
Microcable FUfibre count
2 4 6 8 12
3.0/2.1 3 3 5.0/3.5 3 3 3 3 3 8.0/6.0 3 3 3 3 3
FibreFlow Microcable Fibre Unit (FU)
If asked to list the most important issues to be considered when choosing a high performance fibre unit, most people would include: performance, ease-of-handling and durability . In all these criteria, Emtelle’s microcable FU has been shown to exceed other currently available fibre units.In contrast with previous generation fibre units (typically known as “EPFU”), Emtelle’s fibre unit contains a state-of the-art, specifically designed polymeric sheath that is optimised for blowing: tests (500 metres at 50 metres per minute) have shown that this sheath, in combination with the fibre unit’s single layer resin, improves blowing performance up to 50% .The fibre unit, which is compatible with industry-standard blowing equipment, is also extremely easy to use and handle. For example, compared to other methods, stripping the fibre can be done simply, quickly
and with greater reliability . This ensures considerable savings on the costs associated with manpower .In terms of durability, the fibre unit again outperforms legacy designs . �� Ease of handling and durability�� Compatible with industry-standard blowing equip-ment�� Optimised for blowing�� Proven in many worldwide projects
Combo fibre unit (MHT1204)Combinations of multi mode fibres, optionally together with single mode fibre types or filling elements specific to customer requirements . Contact your local Emtelle representative for further details .
2 Fibre 4 Fibre 6 Fibre 8 Fibre 12 FibreDiameter 1 .1 mm 1 .1 mm 1 .3 mm 1 .5 mm 1 .6mmWeight (mass) 1 .0 g/m 1 .0 g/m 1 .6 g/m 1 .8 g/m 2 .2 g/mBreakout typically 2 mins for 3mBlowing dis-tance
up to 2000m
Minimum Bore size
2 .1mm 2 .1mm 2 .5mm 3 .5mm 3 .5mm
No. 1 2 3 4 5 6 7 8 9 10 11 12Colour Blue Orange Green Red Grey Yellow Brown Violet Black Aqua Pink White
Packaging fibre rosette into panFibre types single mode ITU-T G .652d
single mode ITU-T G .657A1 G .657A2
single mode ITU-T G .655multi mode 62 .5/125 OM1
multi mode 50/125 OM2, OM3, OM4
Refer to page 10 for product codes.
Standard sheath colour is yellow . Other colours are available on request .
Emtelle FibreFlow ABF (fibre bundle) products are the subject of United Kingdom patents GB2409908C & GB2409909C, European patents EP1600801B1 & EP3073305B1, European patent application EP3270203A1 and corresponding patents in other countries . All rights reserved .
Patent
FROM EMTELLE FibreFlow Fibre Products
23
FibreFlow Microcable FU product codes
XC Fibre Bundle (Extreme Condition)
Fibre Unit (FU) with up to twelve fibres set in a layer providing excellent dimensional and thermal stability . An outer thermoplastic layer provides a high level of protection and excellent installation properties . The microcable is designed for blowing and pushing long distances into microducts and tube bundles. The fibres are dry, not coated with gel, thus permitting fast and contamination –free connections .
Pan Weights and Dimensions (ext. height x diameter)
Emtelle can also offer non-standard lengths . These may be subject to longer lead-times than our standard product range . Please call your local Emtelle representative to check for availability .
Small: diameter 540mm, height 200mm, Medium: diameter 540mm, height 300mm, Large: diameter 540mm . height 400mm
FibreFlow Microcable Fibre Unit (FU)
Fibre Countsingle mode ITU-T multi mode
G .652d G .657A1 G .657A2 G .655 62 .5/125OM1
50/125OM2
50/125OM3
50/125OM4
2 9032 9506 90139 90766 9021 7653 9058 9180
4 7590 9507 91033 90159 7578 7577 6669 91816 90024 9508 91032 - 90767 90768 90769 907708 7589 9509 91034 90160 7580 7583 6668 9182
12 7575 9510 90765 9179 7582 7581 7714 901324 91077 91099
Generic Specification MHT1201 MHT2185 MHT2185 MHT1202 MHT1203
TechnicalSpecification MHT1401 MHT2050 MHT2050
Order Example 2 fibre G652d = Product Code 9032 and specify standard length required
Standard Length 2 fibre 4 fibre 6 fibre 8 fibre 12 fibre
12,000m 16 .5 kgLarge – – –
6,000m 10 kgMedium
14 .0 kgLarge
15 .0 kgLarge
18 kgLarge
4,000m 6 .5 kgSmall
10 .2 kgMedium
11 .0 kgMedium
13 .0 kgMedium
2,000m 4 .5 kgSmall
5 .7 kgSmall
6 .0 kgSmall
7 .0 kgSmall
Fibre Count Fibre Type Generic Spec
2 G657A2 MHT26494 G657A2 MHT2649
12 G657A2 MHT2649
Emtelle FibreFlow ABF (fibre bundle) products are the subject of United Kingdom patents GB2409908C & GB2409909C, European patents EP1600801B1 & EP3073305B1, European patent application EP3270203A1 and corresponding patents in other countries . All rights reserved .
Patent
FibreFlow Fibre Products
24
* based on 8f
NordicLite Nanocable
24 Fibre Bundle
Optical fibre microcable with up to twelve fibres set in an encapsulating layer providing excellent dimensional and thermal stability. An outer thermoplastic layer provides a high level of protection and excellent installation properties. The microcable is designed for blowing and pushing long distances into microducts and tube bundles . The strong outer sheath means that additional protection is not required in protected closures or cabinets . The fibres are dry, not coated with gel, thus permitting fast and contamination –free connections .
Product Code 91077The new Emtelle 24 Fibre Bundle can be blown into 5/3/5mm tubes or larger . The Fibre Bundle has great mechanical and blowing properties, just like our existing fibre bundle range. Other advantages of product include the easily identifiable colours and has great environmental performance . It’s low friction outer jacket gives the ability to blow around bends effectively .
Nordic Lite
2f 4-6f 8f 12f
Key Features:�� Designed to be installed by blowing, pulling or pushing
�� Low weight�� Small diameter�� All dielectric design�� Ultra low friction sheath�� Low coil set
It is estimated that the Fibre Bundle can be blown 600 metres into existing networks of underground tube bundles using Emtelle’s GS150 blowing machine .The development of the new 24 Fibre Bundle allows for extra capacity for up to 288 fibres in a 24 way tube bundle, meaning that there will be a lesser requirement for as many feeder cables .
Fibre count Product code
2 910516 910538 91054
12 91055
Scan the QR-code with your smartphone and watch the NordicLite video .
Scan the QR-code with your smartphone and visit the Emtelle YouTube Channel for product & installation videos .
Operational in temperature range-50°C to +70°C*
FROM EMTELLE FibreFlow Fibre Products
25
Emtelle offers a range of micro and mini cable products . These products work in conjunction with Emtelle’s low-friction tube bundles for optimum blowing performance. For customer applications where a high fibre count is required, Emtelle offers a range of mini cable products that are fully water blocked and contain an FRP central strength member (12f to 216f). Emtelle also offers Microcables which are small fibre bundles (2f to 24f) that are water blocked and often, but not always, contain an additional strength member . Contact your local Emtelle representative for more information .
FibreFlow Blown Fibre Micro and Mini Cable
The figures in the table below are representative only .
Micro Cable Mini Cable2 4 12 24 12 24 48 60 72 96 144 192 216 288
Typical Diameter 2 .0mm 2 .0mm 2 .3mm 2 .8mm 5 .8mm 6 .4mm 8 .5mm 10 .5
Blowing Distance 1200m typical 2000m typical 1000m – 1500m typical
Available Fibre Types SM G .652d, G .657A1, G655, G656 (other types available on request)
Minimum Order Quantity 4000m
Microduct size mm
Micro Cable Mini Cable2 4 12 24 12 24 48 60 72 96 144 192 216 288
5/3 .5 3 3 3
7/5 .5 3 3 3 3
10/8 3 3 3 3 3
12/10 3 3 3 3 3 3 3
16/12 3 3 3 3 3 3 3 3 3
18/14 3
72f 144f
48f 24f 96f 12f 36f
Fibre And Tube IdentificationColours to EIA 598 or customer requirement
No. 1 2 3 4 5 6 7 8 9 10 11 12
Colour Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
Sheath MarkingMarked every 1m with standard Emtelle printing or to customer requirementEmtelle FibreFlow - Year - Fibre Count, G652d - Product Code - Batch ID - Metre Mark
FibreFlow Fibre Products
26
No. fibres - 12f 24f 48f 72f
No. Tubes - 6 6 6 6
Fibre Type - G652D G657A1 G652D G657A1 G652D G657A1 G652D G657A1
Tube OD/ID Ø Mm 1 .45/1 .15 1 .45/1 .15 1 .45/1 .15 1 .45/1 .15No. dummy tubes - 5 4 2 -
Central Strength Member Ø Mm 1 .65 1 .65 1 .65 1 .65Cable mass Kg/km 24 25 26 27
Sheath Thickness Mm 0 .5 0 .5 0 .5 0 .5Sheath Material - HDPE HDPE HDPE HDPECable outer Ø Mm 5 .8 5 .8 5 .8 5 .8
Bending radius (installation) Mm 20x Ø 20x Ø 20x Ø 20x Ø
Bending radius (service) Mm 10x Ø 10x Ø 10x Ø 10x ØMax load (fibre strain
0.3% Max) kN 0 .3 0 .3 0 .3 0 .3
Data-Sheet - MHT441 MHT441 MHT441 MHT441Supply Length Km 4,6,8 & 12 4,6,8 & 12 4,6,8 & 12 4,6,8 & 12
Product Code - 90175 90692 90134 90693 90135 90409 90136 90408
No. fibres - 96f 96f 144f 288f
No. Tubes - 8 8 12 24
Fibre Type - G657A1 G652D / G652D G652D G657A1 G652D G657A1 G652D
Tube OD/ID Ø Mm 1 .45/1 .15 1 .7/1 .25 1 .45/1 .15 1 .45/1 .15No. dummy tubes - - - - -
Central Strength Member Ø Mm 2 .6 3 .0 4 .5 2 .9Cable mass Kg/km 37 48 58 72
Sheath Thickness Mm 0 .5 0 .5 0 .5 0 .5Sheath Material - HDPE HDPE PA HDPE PA HDPECable outer Ø Mm 6 .4 7 .3 8 .5 9 .4
Bending radius (installation) Mm 20x Ø 20x Ø 20x Ø 20x Ø
Bending radius (service) Mm 10x Ø 10x Ø 10x Ø 12x ØMax load (fibre strain
0.3% Max) kN 0 .7 0 .7 1 .2 1 .0
Data-Sheet - MHT440 MHT2423 MHT2615 UK_DS_72919 UK_DS_73200
Supply Length Km 4,6,8 & 12 4,6,8 & 12 4,6,8 & 12 4, 6 & 8
Product Code - 90314 90315 90124 90130 90407 90317 90081 7291973200 (eia-598)
For other cables see Fibre Optic Cable catalogue
FibreFlow Blown Fibre Micro and Mini Cable
FROM EMTELLE FibreFlow from EMTELLE
27
FROM EMTELLEFibreFlow Tube bundle - tight protected microduct
27
FibreFlow Tube Bundle
No. fibres - 12f 24f 48f 72f
No. Tubes - 6 6 6 6
Fibre Type - G652D G657A1 G652D G657A1 G652D G657A1 G652D G657A1
Tube OD/ID Ø Mm 1 .45/1 .15 1 .45/1 .15 1 .45/1 .15 1 .45/1 .15No. dummy tubes - 5 4 2 -
Central Strength Member Ø Mm 1 .65 1 .65 1 .65 1 .65Cable mass Kg/km 24 25 26 27
Sheath Thickness Mm 0 .5 0 .5 0 .5 0 .5Sheath Material - HDPE HDPE HDPE HDPECable outer Ø Mm 5 .8 5 .8 5 .8 5 .8
Bending radius (installation) Mm 20x Ø 20x Ø 20x Ø 20x Ø
Bending radius (service) Mm 10x Ø 10x Ø 10x Ø 10x ØMax load (fibre strain
0.3% Max) kN 0 .3 0 .3 0 .3 0 .3
Data-Sheet - MHT441 MHT441 MHT441 MHT441Supply Length Km 4,6,8 & 12 4,6,8 & 12 4,6,8 & 12 4,6,8 & 12
Product Code - 90175 90692 90134 90693 90135 90409 90136 90408
No. fibres - 96f 96f 144f 288f
No. Tubes - 8 8 12 24
Fibre Type - G657A1 G652D / G652D G652D G657A1 G652D G657A1 G652D
Tube OD/ID Ø Mm 1 .45/1 .15 1 .7/1 .25 1 .45/1 .15 1 .45/1 .15No. dummy tubes - - - - -
Central Strength Member Ø Mm 2 .6 3 .0 4 .5 2 .9Cable mass Kg/km 37 48 58 72
Sheath Thickness Mm 0 .5 0 .5 0 .5 0 .5Sheath Material - HDPE HDPE PA HDPE PA HDPECable outer Ø Mm 6 .4 7 .3 8 .5 9 .4
Bending radius (installation) Mm 20x Ø 20x Ø 20x Ø 20x Ø
Bending radius (service) Mm 10x Ø 10x Ø 10x Ø 12x ØMax load (fibre strain
0.3% Max) kN 0 .7 0 .7 1 .2 1 .0
Data-Sheet - MHT440 MHT2423 MHT2615 UK_DS_72919 UK_DS_73200
Supply Length Km 4,6,8 & 12 4,6,8 & 12 4,6,8 & 12 4, 6 & 8
Product Code - 90314 90315 90124 90130 90407 90317 90081 7291973200 (eia-598)
For other cables see Fibre Optic Cable catalogue
Blown Fibre
FibreFlow from EMTELLE
28
FibreFlow Tube bundle - Microduct / Primary tube
28
Microduct Supply Length Minimum Order Quantity
Product weight per metre
gmsDrum Type
3/2 .1mm PE 4000m 4000m 3 .4 HH
4/2 .1mm PE 4000m 4000m 9 HH
5/2 .1mm PE 4000m 4000m 15 HH
5/3 .5mm PE 5000m 5000m 9 .4 HH
6/2 .7mm PE 4000m 4000m 20 .9 HH
7/3 .5mm PE 4000m 4000m 28 HH
7/4mm PE 4000m 4000m 25 HH
8/3 .5mm PE 3000m 3000m 38 HH
8/5mm PE 3000m 3000m 29 .2 HH
8/6mm PE 3000m 3000m 21 HH
10/6mm PE 2000m 4000m 48 HH
10/8mm PE 2000m 4000m 27 HH
12/8mm PE 2000m 4000m 60 HH
12/10mm PE 2000m 4000m 33 HH
14/10mm PE 1000m 4000m 72 .2 HH
16/10mm PE 1000m 4000m 116 .9 HH
16/12mm PE 1000m 4000m 83 .9 HH
5/3 .5mm LFH 4000m 4000m 15 .3 HH
5/3 .5mm LFH 500m 4000m 15 .3 350Ply
6/2 .7mm LFH 4000m 4000m 34 .3 HH
7/4mm LFH 4000m 4000m 39 .4 HH
12/8mm LFH 2000m 4000m 96 HH
14/10mm LFH 1000m 4000m 115 HH
Subducts
18/14 PE 2000m 4000m 95 .9 B
20/14 PE 2000m 4000m 152 .9 1 .4D
20/16 PE 2000m 4000m 107 .9 1 .4D
Microduct / Primary tube sizes
For handling guidelines, please visit www .emtelle .com/handling-guidelines
Available in 12 colours:
No. 1 2 3 4 5 6 7 8 9 10 11 12Colour Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
FROM EMTELLE FibreFlow from EMTELLE
29
FROM EMTELLE FibreFlow Tube bundle
29
Tube BundleEmtelle is experienced enough in air blown fibre installation to understand that no two projects are the same. Factors such as network size, customer requirements, geography, topography, application areas and usage projections (to name but a few) require special considerations in terms of the technology and products used . To ensure that it provides the right solution every time, Emtelle offers an extensive line of high-quality products that can cover the requirements of the vast majority of projects . For easy reference, the following pages provide details of our tube bundle products .
The following pages detail Emtelle’s FibreFlow microduct bundles . These products are supplied on non-returnable wooden drums or plywood reels .Each FibreFlow product listed in the product table on the following pages will refer to a “drum type”, which is the particular drum the product is supplied on .As there are different size drums, please refer back to the table underneath providing information on the drum dimensions and drum weight for an empty drum .
Drum
Type Product code Dimensions (OD x W )mm Weight kg
coil 600 x 300 0
350 ply 13648 350 x 200 5
450 ply 13646 450 x 250 7
600 ply 13650 600 x 300 8
650 ply 11021 650 x 300 9
700 ply 13651 700 x 350 10
E 12063 800 x 516 27
F 12064 1000 x 646 40
G 12065 1200 x 718 61
HH 13698 1000 x 475 35
MB5 1200 x 1018 65
1 .2D 12066 750 x 1018 65
1 .4D 12011 1400 x 1100 92
1 .7D 13660 1700 x 1140 131
2 .0D 13900 2000 x 1140 188
2 .2D 13998 2200 x 1165 281 .5
2 .35D 13875 2350 x 1165 316
FibreFlow from EMTELLE
30
FibreFlow Tube bundle - tight protected microduct
30
FibreFlow microducts with diameters ranging from 3 to 16mm are available and can be bundled in configurations of up to 24 tubes dependent on the individual microduct diameter. Bundles are available in several types – for example, direct bury, direct install and low fire hazard – making them ideal for diverse applications such as FttH, In-Building and Campus. They can also be customized to meet specific environmental challenges.
1
7
11
18 198
9
10
11
3
2717
166 1
4
12
515
14
10 11121
2
3
456
7
8
9
2423
22
21
20
1918 17
16
15
14
13
13
1210
9
8 52
7 6
3 1 4
2
1 36
5 4
1
2
2
4 3
2-WAY
LFH DI
STANDARD TUBE NUMBERING SYSTEM
TUBE SEQUENCE (DI/DB)
4-WAY
7-WAY
12-WAY
19-WAY
24-WAY
1
1
2
2 21
2
3
4
2
115
45 1
3
5
43
2
2 121
1
2
345
6
7
1
26
5
4
3
21 7
6
5
4
3
1
24
3
2 21
1 3
1 1 1
1
1 14
3 2
1
1
1
1 1
1 red 12 green 1
1 red 12 green 13 natural 14 blue 1
1 natural 12 red 13 green 14 blue 15 blue 26 blue 37 blue 4
1 red 1 7 yellow 22 green 1 8 yellow 33 natural 1 9 blue 14 red 2 10 blue 25 green 2 11 blue 36 yellow 1 12 blue 4
1 natural 1 10 yellow 12 red 1 11 yellow 23 green 1 12 yellow 34 natural 2 13 yellow 45 natural 3 14 yellow 56 natural 4 15 blue 17 natural 5 16 blue 28 red 2 17 blue 39 green 2 18 blue 4 19 blue 5
1 red 1 12 yellow 12 green 1 13 yellow 23 natural 1 14 yellow 34 natural 2 15 yellow 45 natural 3 16 yellow 56 natural 4 17 yellow 67 natural 5 18 yellow 78 natural 6 19 blue 19 natural 7 20 blue 210 red 2 21 blue 311 green 2 22 blue 4 23 blue 5 24 blue 6The Central
microduct can be used to blow mini cable .
Emtelle Standard Microduct Numbering System Microduct Sequence (DI/DB) EIA-598
DI/DB
FibreFlow Tube Bundles
Tight protected microducts: suitable for the installation of fibre units containing between 1 and 12 fibres as well as minicable (24-144 fibres). In 3mm, 5mm, 7mm and 8mm microduct diameters the bundles can contain up to 24 individual microducts . They are usually deployed in the access part of the network – in FttH and Campus applications, for example.
S
S
SS S
S
S
SS S S
S
S
SSSS
S
S
FROM EMTELLE FibreFlow from EMTELLE
31
FROM EMTELLEFibreFlow Tube bundle - (DBmf) - Thickwall
31
Direct Bury metal free (DBmf) - Thickwall
DBmf Heavy-Wall Microduct Bundles
All these bundles have simplicity and strength. They have exceptional toughness and crush resistance and can be directly buried without the need for additional protective closures at branch-off points, or inline connections . The individual microducts are so strong that the outer sheath does not need to be protective in design, but simply holds the bundle together . The individual tubes can be joined by Protected and Directly Buried rated connectors (page 66-68) . This solution is easy to use, quick to install and will reduce the Total Cost of Ownership long term . The 1, 2 and 3 way bundles are also suitable for slot cut installations .
Product Code Description Supply
Length Drum Type Product weight
Bundle ODmm
Generic Specification
5/2.1mm63778 1DBmf 500 coil 74 10 .0 MHT128163779 1DBmf 4000 G 74 10 MHT1281
7/3.5mm60171 1 DBmf 4000 HH 28 7 .0 MHT230963780 2 DBmf 4000 MB5 97 9.2 x 16.4 MHT230963783 4 DBmf (Square) 4000 1 .7D 170 19 .1 MHT230963784 4 DBmf (Flat) 4000 1 .4D 152 9x30 CP160863786 6 DBmf (Flat 2x3) 4000 1 .7D 196 15.5x22.5 CP140063787 7 DBmf 4000 2 .0D 266 23 .2 MHT230963788 8 DBmf + 1x 12/8 2000 2D 367 28,2 CP206763789 9 DBmf + 1x 14/10 3000 2 .35D 406 30 CP150163790 10 DBmf + 1x 16/12 2000 2 .2D 480 32 CP369463791 12 DBmf 3000 2 .2D 429 30 .7 MHT230963792 12 DBmf + 1x 14/10 2000 2 .35D 501 30x35.9 CP155163793 12 DBmf + 1x 16/12 2000 2 .35D 529 30x38 CP299063798 19 DBmf 2000 2 .2D 640 36 .2 MHT230963800 24 DBMF + 1 x14/10 1000 2 .2D 860 44 .2 MHT2309
7/4mm60178 1 DBmf 4000 HH 25 7 .0 MHT230963802 2 DBmf 4000 MB5 91 9.2 x 16.4 MHT230963803 3 DBmf (Triangular) 4000 1 .7D 128 18,5 CP310463805 4 DBmf (Square) 4000 1 .7D 159 19 .1 MHT230963806 4 DBmf (Flat) 4000 1 .4D 163 9x30 CP289163808 6 DBmf (Flat 2x3) 4000 1 .7D 196 15.5x22.5 CP363863809 7 DBmf 4000 2 .0D 247 23 .2 MHT230963810 9 DBmf + 1x 14/10 3000 2 .35D 381 30 CP363763812 12 DBmf 3000 2 .2D 395 30 .7 MHT230963813 12 DBmf + 1x 14/10 2000 2 .35D 467 30x35.9 CP155063814 12 DBmf + 1x 16/12 2000 2 .35D 495 30x38 CP330563815 12 DBmf + 3x 14/10 1400 2 .35 641 43,6 CP2730
63816 13 DBmf + 2x 14/10 2000 2 .35 589 30.2x44 CP2432
63817 14 DBmf 2500 2 .35D 445 32,8 CP978
63819 19 DBmf 2000 2 .2D 587 36 .2 MHT2309
63821 24 DBMF + 1 x14/10 1000 2 .2D 793 44 .2 MHT2309
63822 24 DBMF 1000 2 .2D 712 33.4x44 CP1445
FibreFlow from EMTELLE
32
FibreFlow Tube bundle - tight protected microduct
32
Example configuration
Product Code Description Supply
Length Drum Type Product weight
Bundle ODmm
Generic Specification
10/6mm60728 1 DBmf 3000 WHH 48 10 .0 MHT1563
63823 2 DBmf 3000 1 .4D 150 12 x 22 MHT1563
63824 3 DBmf (Flat) 3000 1 .7D 218 12 x 32 MHT1563
63825 3 DBmf (Triangular) 3000 2 .0D 212 23,8 MHT1563
63826 4 DBmf (Square) 3000 1 .7D 266 26 .1 MHT1563
63827 4 DBmf (Flat) 3000 1 .7D 256 12.2x42.2 CP2892
63828 5 DBmf 3000 2 .2D 343 29 .2 MHT1563
63830 7 DBmf 3000 2 .35D 430 32 .0 MHT1563
63831 12 DBmf 1500 2 .35D 646 43 .0 MHT1563
63833 19 DBmf 1000 2 .35D 1051 51,6 CP1624
12/8mm60014 1 DBmf 2000 HH 60 12 .0 MHT1564
63834 2 DBmf 2000 1 .4D 184 14 x 26 MHT1564
63835 3 DBmf (Triangular) 2000 1 .4D 267 14 x 38 CP1461
63836 3 DBmf (Flat) 2000 1 .2D 267 14x38 MHT1564
63837 4 DBmf (Square) 2000 2 .0D 347 31 .0 MHT1564
63838 4 DBmf (Flat) 2000 1 .7D 325 14x50 CP1516
63839 5 DBmf 2000 2 .2D 434 34 .4 MHT1564
63840 6 DBmf (Flat 2x3) 2000 2 .2D 465 38 .0 CP1800
63841 7 DBmf 2000 2 .2D 531 38 .0 MHT1564
63551 8 DBmf (flat 2x4) 2000 2 .25D 621 26.2x50.2 CP3465
62963 8 DBmf + 1x 20/16 1000 1 .7D 734 46,2 CP1479
63842 10 DBmf 1000 2 .35D 745 35x50.2 CP2224
63843 12 DBmf 1000 2 .2D 862 51 .0 MHT1564
14/10mm8506 1 DBmf 1500 HH 73 14 .0 MHT2308
63844 2 DBmf 1500 MB5 215 30 x 16mm MHT2308
63845 3 DBmf (Triangular) 1500 2 .25D 301 30 CP1410
63846 3 DBmf (Flat) 1500 1 .4D 314 44 x 16mm MHT2308
63847 4 DBmf (Square) 1500 2 .0D 391 36mm across corners MHT2308
63848 4 DBmf (Flat) 1000 2 .25D 412 16.2x58.2 CP1573
63849 5 DBmf 1500 2 .0D 507 40mm across corners MHT2308
63850 6 DBmf 1500 2 .2D 561 44mm across corners MHT2308
63851 7 DBmf 1500 2 .2D 631 44mm across corners MHT2308
63852 8 DBmf 1000 2 .35D - 1400 728 44x53.9 CP3044
63853 8 DBmf + 1x 25/20 750 2 .35D - 1500 918 55,2 CP2767
63854 10 DBmf 1000 2 .35D - 1400 890 40.5x58.2 CP2214
63855 12 DBmf 500 2 .35D - 1500 1047 59 CP2901
FROM EMTELLE FibreFlow from EMTELLE
33
FROM EMTELLEFibreFlow Tube bundle - tight protected microduct
33
Product Code Description Supply
Length Drum Type Product weight
Bundle ODmm
Generic Specification
16/12mm60618 1 DBmf 1000 F 84 16 .0 MHT2432
63522 2 DBmf 1000 MB5 249 34 x 18 MHT2432
63856 3 DBmf (Flat) 1000 1 .4D 363 50 x 18 MHT2432
63857 3 DBmf (Triangular) 1000 2D 34x34 CP3304
63858 4 DBmf (Square) 1000 2 .0D 447 41mm across corners MHT2432
63859 4 DBmf (Flat) 1000 1 .7D 478 18.2x66.2 CP1329
63860 5 DBmf 1000 2 .0D 580 45 .5mm across corners MHT2432
63861 6 DBmf 1000 2 .2D 642 50mm across corners MHT2432
63862 7 DBmf 1000 2 .2D 736 50mm across corners MHT2432
63863 8 DBmf 500 2 .35D 853 60,5 CP2593
63864 12 DBmf 400 2 .35D 1214 67 CP1907
18/14mm62751 1 DBmf 2000 G 96 18 CP1567
63865 2 DBmf 1000 1 .4D 315 20x38 CP1567
63867 3 DBmf (Triangular) 1000 2 .0D 418 41,2 CP2690
63868 4 DBmf (Square) 1000 2 .2D 540 43,5 CP1567
63869 4 DBmf (Flat) 1000 1 .7D 550 20x74 CP2556
63870 5 DBmf 1000 2 .2D 683 51,2 CP1567
62951 7 DBmf 900 2 .35D 880 56,6 CP2346
20/15mm63872 1 DBmf 6000 2 .2D 108 20 CP1830
63873 2 DBmf 1000 1 .7D 374 22.2x42.2 CP1830
63874 3 DBmf (Triangular) 1000 2 .35D 525 45 CP1830
63875 4 DBmf (Square) 1000 2 .35D 678 50,5 CP1830
63876 5 DBmf 900 2 .35D 901 56 CP1830
63877 7 DBmf 500 2 .35D 1113 62,2 CP1830
FibreFlow from EMTELLE
34
FibreFlow Tube bundle - Direct Bury
34
The assembly is surrounded with a 125μm aluminium layer, bonded inside a sheath of flexible black PE with a heavy duty orange coloured HDPE sheath making the product suitable for direct burial . Rip cords are pre-installed along the entire length, under the sheath, to rip through the aluminium and sheath using correct procedure .
Product Code Description Supply
Length Drum Type Product weight per metre gms
Bundle ODmm
Generic Specification
5/3.5mm60869 1DB 4000 MB5 72 10 .0 MHT113
63878 2DB 4000 1 .4D 159 12.2 x 17.2 MHT113
63879 4DB 4000 1 .7D 216 19 .3 MHT113
63880 7DB 4000 2 .0D 278 22 .2 MHT113
63883 12DB 4000 2 .35D 411 28 .2 MHT113
63885 19DB 3000 2 .35D 526 32 .2 MHT113
63126 24DB + 1x10/8 2000 2 .2D 671 37 .8 MHT113
63887 26DB + 1x12/10 2000 2 .35D 750 39,9 CP1278
10/8mm63888 1DB 2000 MB5 185 17 .2 MHT167
63889 2DB 2000 1 .4D 285 17.2 x 27.2 MHT167
63890 4DB 2000 2 .0D 450 31 .9 MHT167
63891 5DB 2000 2 .2D 396 32 CP122
63892 7DB 2000 2 .2D 606 37 .8 MHT167
63893 12DB 1000 2 .2D 946 49 .5 MHT167
12/10mm63894 1DB 2000 MB5 205 19 .1 MHT16763895 2DB 2000 1 .7D 331 19.1 x 31.1 MHT16763896 4DB 2000 2 .2D 542 36 .8 MHT16763897 5DB 2000 2 .35D 629 40,5 CP41063898 7DB 1000 2 .0D 726 43 .8 MHT167
Direct Bury (DB) - with foil
FROM EMTELLE FibreFlow from EMTELLE
35
FROM EMTELLEFibreFlow Tube bundle - tight protected microduct
35
FibreFlow Tube bundle - (DBmf) - Traditional
Direct Bury metal free (DBmf) - Traditional
Assemblies of PE microducts, each with low friction performance . Each assembly (tube bundle) is surrounded by a water blocking tape that reacts to block water movement . Over the bundle is one sheath of flexible black PE, and one sheath of tough orange direct burial-grade PE . These strong products are designed for direct burial into suitably prepared ground .
Product Code Description Supply
lengthDrum Type
Product weight per metre gms
Bundle ODmm
Generic Specification
5/3.5mm63760 1DBmf - coil 500 coil 62 10 .0 MHT215663761 1DBmf - drum 4000 MB5 62 10 .0 MHT215663762 2DBmf 4000 1 .4D 145 12.3 x 17.3 MHT215663763 4DBmf 4000 1 .7D 203 19 .4 MHT215663764 7DBmf 4000 2 .0D 262 22 .3 MHT215662646 9DBmf + 1x 10/8 2000 2 .0D 386 28,5 CP39663766 12DBmf 4000 2 .35D 389 28 .1 MHT2156
62971 13DBmf + 1x 16/13 2000 2 .25D 501 33,8 CP724
63767 19DBmf 3000 2 .35D 500 32 .1 MHT215663258 22DBmf + 1x 8/6 2000 2 .2D 580 35,8 CP292263768 24DBmf + 1x10/8 2000 2 .2D 637 37 .7 MHT215663769 26DBmf + 1x12/10 2000 2 .35D 675 39,9 CP776
10/8mm63770 1DBmf 2000 MB5 184 17 .7 MHT174363771 2DBmf 2000 1 .4D 261 17.3 x 27.3 MHT180563772 4DBmf 2000 2 .0D 480 31 .9 MHT180563773 5DBmf 2000 2 .2D 471 34 .4 MHT180563774 7DBmf 2000 2 .2D 650 37 .8 MHT180563775 12DBmf 1000 2 .2D 820 47,8 CP3277
12/10mm61888 1DBmf 2000 1 .4D 203 19,2 MHT180563776 2DBmf 2000 1 .7D 309 19.1 x 31.1 MHT180562999 4DBmf 2000 2 .2D 505 36 .8 MHT180563777 5DBmf 2000 2 .35D 573 39 .8 MHT180561892 7DBmf 1000 2 .0D 684 43 .8 MHT1805
FibreFlow from EMTELLE
36
FibreFlow Tube bundle - Direct Install
36
The assembly is surrounded with a 125µm aluminium layer, bonded inside a sheath of flexible black PE for direct-in-duct installation. A rip cord is pre-installed along the entire length, under the sheath, to rip through the aluminium and sheath using correct procedure .Also available in 8/6mm .
Product Code Description Supply Length Drum Type Product weight
per metre gmsBundle OD
mmGeneric
Specification
5/3.5mm63906 1DI 4000 G 49 8 .4 MHT175
63907 2DI 4000 MB5 77 8.4 x 13.4 MHT175
63908 4DI 4000 1 .4D 118 15 .5 MHT175
63909 7DI 4000 1 .7D 162 18 .4 MHT175
63910 9DI + 1x 10/8 3000 2D 241 24 CP3529
63911 10DI +1x 12/10 2000 2D 250 24,4 CP3195
63912 12DI 4000 2 .0D 240 23 .8 MHT17563913 13DI + 1x 16/13 2000 2 .2D (1200) 230 29,4 CP280363914 19DI 4000 2 .35D 329 27,8 MHT175
63916 24DI + 1x 10/8 2000 2 .0D 437 33 .4 MHT17510/8mm
63917 1DI 2000 G 98 13 .4 MHT888
63918 2DI 2000 MB5 162 13.4x23.4 MHT888
63919 3DI + 3x 5/3.5 2000 1 .7D 258 25,5 MHT1271
63920 4DI 2000 1 .7D 262 27 .5 MHT888
63921 7DI 2000 2 .0D 368 33 .4 MHT888
63922 12DI 1000 2 .2D (1200) 560 44,6 CP218
63923 19DI 1000 2 .25D 793 52,2 CP1735
12/10mm
63924 1DI 2000 MB5 108 15 .3 MHT888
63925 2DI 2000 1 .4D 178 15.3x27.3 MHT888
63926 3DI + 3x 5/3.5 2000 2D 265 29,3 CP854
63927 4DI 2000 2 .0D 302 32 .4 MHT888
63928 7DI 2000 2 .35D 413 39 .4 MHT888
Direct Install (DI) - with Foil
37
FibreFlow Tube bundle - DBT+DImf
37
Direct Install metal free (DImf)
It is essential that users of this product securely anchor the sheath and contents of the tube bundle to a fixed point (eg manhole side or duct mouth ) wherever the product emerges from a duct section. These duct sections should not be longer than 500m. Refer to specification MHT1772.
ProductCode Description Supply
Length Drum Type Product weight per metre gms
Bundle ODmm
Generic Specification
5/3.5mm63929 1DImf 4000 G 47 MHT177263930 2DImf 4000 MB5 71 MHT177263931 4DImf 4000 1 .4D 109 MHT177263932 7DImf 4000 1 .7D 151 MHT177263933 9DI + 1x 10/8 3000 2D 241 24 CP53763934 10DI +1x 12/10 2000 2D 250 24,4 CP145163935 12DImf 4000 2 .0D 224 MHT177263936 13DImf + 1x 16/13 2000 2 .2D (1200) 219 29,4 CP280363937 19DImf 4000 2 .35D 310 MHT177263939 24DImf + 1x 10/8 2000 2 .0D 410 MHT1772
A simple sheathed bundle incorporating no metal, suitable for pulling into duct using moderate force . When using Emtelle Direct Install Metal Free Products adequate provision must be made to take account of all strain which may be caused by installation forces, practices and procedures, thermal changes, heat reversion or any other reasonably foreseeable force applied to the product .
Product Code Description Supply
Length Drum Type Product weight g/m
Bundle ODmm
Generic Specification
5/3.5mm63899 1DBT 4000 1 .4D 136 MHT177463900 2DBT 4000 1 .4D 164 MHT177463901 4DBT 4000 2 .0D 260 MHT177463902 7DBT 4000 2 .0D 328 MHT177463903 12DBT 3000 2 .2D 475 MHT177463904 19DBT 2000 2 .2D 599 MHT177463905 24DBT + 1x 10/8 2000 2 .2D 730 MHT1774
Microducts are oversheathed with a layer of nylon12, which gives mechanical and chemical protection against attack by termites and ants (and their formic acid) .
Direct Bury Termite Resistant (DBT)
FibreFlow from EMTELLE
38
FibreFlow Tube bundle - Aerial
38
Aerial Tube Bundle
Figure-8 construction with steel and glass reinforced strength member . All compatible fittings are available.
Product Code Description Supply Length
m Drum Type Product weight per metre gms Data_Sheet ref Generic
Specification4/2.7
61166 4F8 1400 1 .2D 257 UK_DS_61166 CP107760752 7F8 1400 1 .2D 317 UK_DS_60752 CP99960753 12F8 1400 1 .4D 383 UK_DS_60753 CP100160894 12F8 + 1x 12/10 1400 1 .7D 458 UK_DS_60894 CP98060754 24F8 + 1x 8/6 1400 2 .0D 542 UK_DS_60754 CP981
05/3.58194 4F8 1000 700 Ply 42 UK_DS_8194 MHT1470C60890 7F8 1400 1 .4D 313 UK_DS_60890 CP8708195 9F8 + 1x 10/8 1400 1 .4D 367 UK_DS_8195 MHT141160891 10F8 + 1x 12/10 1400 1 .7D 363 UK_DS_60891 CP103261167 12F8 1400 1 .7D 456 UK_DS_61167 CP113660755 12F8 + 1x 10/8 1400 1 .7D 453 UK_DS_60755 CP103060892 17F8 + 1x 10/8 1400 1 .7D 450 UK_DS_60892 CP107060757 19F8 1400 2 .0D 463 TBC CP103360756 19F8 1400 2 .0D 549 UK_DS_60756 CP1031
10/8.0 61165 1F8 1400 1 .2D 229 UK_DS_61165 CP120360893 4F8 1400 1 .7D 370 UK_DS_60893 CP91560758 7F8 1400 2 .25D 606 UK_DS_60758 CP952
12/10.061170 4F8 1400 2 .25D 401 UK_DS_61170 CP117560759 7F8 1400 2 .35D 676 UK_DS_60759 CP1069
Emtelle recommends that the customer checks and ensures that the products are suitable to be installed on existing route. In particular, it is essential that the customer verifies that existing or proposed cable supports (towers or poles) are sufficiently robust and suitable to carry the required clamps and cable.
Aerial Metal Free / GRP
Product Code Description Supply Lengthm Drum Type Product weight
per metre gms Data_Sheet ref Generic Specification
5/3.5mm61173 4F8MF 2000 1 .4D 161 UK_DS_61173 CP902
61174 7F8MF 2000 1 .7D 204 UK_DS_61174 CP1124
61178 8F8MF + 2x 12/10 2000 2 .2D 451 UK_DS_61178 CP967
61175 9F8MF + 1x 10/8 2000 2 .0D 302 UK_DS_61175 CP910
61176 12F8MF + 1x 10/8 1000 1 .7D 367 UK_DS_61176 CP1125
12/10mm63333 1F8MF 1000 1 .2D 179 UK_DS_63333
Single drop and Figure 8 construction with GRP strength member . These products have no metallic elements .
FROM EMTELLE FibreFlow from EMTELLE
39
FROM EMTELLEFibreFlow Tube bundle - Universal Drop Tube -Tight Protected Microduct
39
Universal Drop Tube
FibreFlow Tube Bundle - Tight Protected Microduct
Product code 30720FibreFlow Invictus can be delivered on a drum, or in a coil allowing for easy delivery to site and quick installation – the product can be laid straight into the trench from the drum or coil trailer . The added strength within the Invictus product allows it to be buried at half the depth, with “as dug” material used as backfill.When compared to the traditional UK highways method of a 900mm deep trench with virgin backfill material, FibreFlow Invictus offers hige cost and time savings from installation perspectives .
In some circumstances, deploying FibreFlow Invictus will enable contractors to double the length of installs per day .
Why use FibreFlow Invictus:
FibreFlow Invictus
�� Ideal for city builds/feeder for FTTH��Long lengths (300m coils)��Cables cabe blown/pushed/pulled��Traditional sized ducts for easy training��Very strong��Lays very straight��Huge fibre capacity��25, 32, 35, 37 + 40mm duct sizes available
Scan the QR-code with your smartphone and watch the FibreFlow Invictus video .
Emtelle Universal Drop Tube is used as a customer drop tube for a variety of installations – it can be used overhead, in duct, along walls or directly buried .With GRP strength members in the wall, the Universal Drop Tube is spade resistant and means contractors have the option to bury the product at a shallower depth due to added strength . All Emtelle 2-12fu can be blown into the Universal Drop Tube including the new 2f Nordic Lite nanocable .
Why use the Universal Drop Tube?� The duct is universal� Can be installed as direct bury, direct install, aerial &
en-façade� 2xGRP in wall for added strength
� Low friction liner for better blowing performance� Less thermal expansion and contraction� Hi-UV resistant� Longer lifetime
Product Code Description Supply
Length Drum Type Product weight g/m
Bundle ODmm
Generic Specification
63940 6/2 .7mm 4000 WH 22 6 CP296763941 7/3 .7mm 4000 WH 31 7 CP137063942 8/4mm 4000 WH 37,2 8 CP242463943 10/5mm 4000 1 .4D 58,1 10 CP323563944 15/9mm 4000 1 .4D 97 15 CP3038
FibreFlow from EMTELLE
40
FibreFlow Tube bundle - Low Fire Hazard (LFH)
40
Product Code Description Supply
Length Drum Type Product weight per metre gms
Bundle ODmm
Generic Specification
4/2.5mm62401 1LFH 4000m HH 40 .5 6 .2 MHT261762402 2LFH 4000m F 65 6 .2/10 .2 MHT261762403 4LFH 4000m 1 .2D 104 11 .9 MHT261762404 7LFH 4000m 1 .4D 151 14 .2 MHT261762405 12LFH 4000m 1 .7D 244 18 .7 MHT261762406 19LFH 4000m 2 .0D 344 22 .0 MHT261762407 24LFH 4000m 2 .2D 461 26 .6 MHT2617
5/3.5mm6318 Primary 500m 350 ply 15 .5 - MHT423
6634 Primary 1000m 450 ply 15 .5 5 MHT4236595 Primary 4000m HH 15 .5 5 MHT4236772 1LFH 1000m 700 ply 48 7 .2 MHT423
6403S 2LFH 500m 600 ply 80 7 .2/12 .2 MHT4236502 2LFH 1000m 700 ply 80 7 .2/12 .2 MHT4236403 2LFH 4000m G 80 7 .2/12 .2 MHT4236511 4LFH 500m E 126 12 .2/14 .3 MHT4236643 4LFH 1000m F 126 12 .2/14 .3 MHT4236404 4LFH 4000m 1 .4D 126 12 .2/14 .3 MHT4236515 7LFH 500m E 190 17 .2 MHT4236610 7LFH 1000m G 190 17 .2 MHT4236405 7LFH 4000m 1 .7D 190 17 .2 MHT423
6533S 12LFH 500m F 310 22 .9 MHT4236533 12LFH 1000m MB5 310 22 .9 MHT423
6533A 12LFH 4000m 2 .0D 310 22 .9 MHT4236611S 19LFH 500m G 438 26 .9 MHT4236611 19LFH 1000m 1 .4D 438 26 .9 MHT423
6611A 19LFH 4000m 2 .2D 438 26 .9 MHT4236513 24LFH 500m MB5 591 32 .5 MHT4236612 24LFH 1000m 1 .7D 591 32 .5 MHT4236612L 24LFH 2000m 2 .0D 591 32 .5 MHT423
Low Fire Hazard (LFH)No CPR required.Assembly of LFH microducts, each with low friction performance and suitable for fibre blowing. Each assembly is surrended with a sheath of LFH material suitable for indoor fire regulation use and giving excellent performance in fire scenario.Microducts are considered as cable management systems by EN 50174 series standards and are therefore not subject to the CPR system . This has been formally stated by BSI and German national standards bodies . BS EN 61386-1 Conduit Systems for Cable Management is therefore used by Emtelle to verify our products for internal use. This includes a flame propagation test. Additionally Emtelle have carried out testing to IEC60332-1 and in some cases IEC60332-3 .
�� Low flammability �� Halogen free�� Low smoke
FROM EMTELLE FibreFlow from EMTELLE
41
FROM EMTELLEFibreFlow Tube bundle - Low Fire Hazard (LFH)
41
Low Fire Hazard (LFH)No CPR required.
Product Code Description Supply
Length Drum Type Product weight per metre gms
Bundle ODmm
Generic Specification
7/4mm62191 Primary 1000m PIFU 39 7 CP82061487 Primary 2000m HH 39 7 CP82061488 1LFH 2000m F 84 9 .2 CP82161371 2LFH 2000m G 148 9.2 x 16.2 CP122961372 4LFH 2000m MB5 266 19 .5 CP123061933 7LFH 2000m 1 .7D 407 21 CP152461489 12LFH 2000m 2 .0D 665 30 .9 CP141161373 19LFH 1000m 1 .7D 960 36 .5 CP123161490 24LFH 1000m 2 .0D 1371 44 .9 CP1412
14/10mm60008 Primary 500m HH 115 14 .0 CP77261156 Primary 1000m HH 115 14 .0 CP77261157 2LFH 1000m MB5 377 30.5 x 16.5 CP1112
61158 3LFH 1000m 1 .4D 518 32 .7 CP897
61159 4LFH 1000m 1 .7D 658 34 .2 CP1079
61160 6LFH 1000m 2 .0D 964 41 .4 CP119961161 7LFH 1000m 2 .0D 1079 44 .7 CP 898
FibreFlow from EMTELLE
42
FibreFlow Tube bundle - Specialist Applications
42
Specialist Applications
The Emtelle Vertex product range of FibreFlow Tube Bundles have been designed for installation into Microtrench and Slot Cut Installations . These products are narrow to enable the trench width to be narrow, which increases Trenching speed and therefore reduces trenching costs . Emtelle have been supplying Blown Fibre products for Microtrenching for over 12 years .Emtelle also supply accessories for Microtrenching such as narrow Marker Tapes, Direct Buried Connectors and have Tube Bundles which can accommodate Fibre Cables from 2 fibres up to 288 fibres for Microtrench applications.
Product Code Description Supply Length Drum Type
Product weight per metre
gmsBundle OD
mmGeneric
Specification
7/3.5mm63784 4 DBmf (Flat) 4000 1 .4D 152 9x30 CP160863786 6 DBmf (Flat 2x3) 4000 1 .7D 196 15.5x22.5 CP140062346 16 DBMF 2000 2 .0D 626 67.0x16.2 CP2015
7/4.063806 4 DBmf (Flat) 4000 1 .4D 163 9x30 CP289163808 6 DBmf (Flat 2x3) 4000 1 .7D 196 15.5x22.5 CP3638
10/6.063824 3 DBmf (Flat) 3000 1 .7D 218 12x32 MHT156363827 4 DBmf (Flat) 3000 1 .7D 256 12.2x42.2 CP2892
12/8.063836 3 DBmf (Flat) 2000 1 .2D 267 14x38 MHT156463838 4 DBmf (Flat) 2000 1 .7D 325 14x50 CP151663840 6 DBmf (Flat 2x3) 2000 2 .2D 434 34 .4 CP180062215 6 DBmf (Flat 1x6) 2000 2 .0D 515 80.0x14.2 CP196763551 8 DBmf (flat 2x4) 2000 2 .25D 621 26.2x50.2 CP3465
14/10.063846 3 DBmf (Flat) 1500 1 .4D 314 44x16 MHT230863848 4 DBmf (Flat) 1000 2 .25D 412 16.2x58.2 CP1573
16/12.063856 3 DBmf (Flat) 1000 1 .4D 363 50x18 MHT243263859 4 DBmf (Flat) 1000 1 .7D 478 18.2x66.2 CP1329
18/14.063869 4 DBmf (Flat) 1000 1 .7D 550 20x74 CP2556
powered by FibreFlowVertex
FibreFlow Vertex
Scan the QR-code with your smartphone and watch the Vertex video .
FROM EMTELLE FibreFlow from EMTELLE
43
FROM EMTELLEFibreFlow Tube bundle - Specialist Applications
43
Assembly of 7 PE microducts surrounded with a polymer filling layer, a protective layer of corrugated steel (very effective against rodents) and a heavy duty PE outer sheath .DBR metal free rodent resistant products are available, please contact your local Emtelle representative for further information .
Assembly of 7LFH microducts surrounded by a sheath of LFH, a protective layer of corrugated steel (very effective against rodents) then a secondary LFH sheath .
Product Code Description Microduct Bundle Od mm
Product weight g/m Specification Supply Length
82447DBSA 5/3 .5mm 22 .8mm 392 MHT1781
1000m8244B 2000m63946 12 DBSA 5/3 .5mm 30,2 532 CP3198 2000m63947 24 DBSA 5/3 .5mm 39,4 798 CP2847 2000m63948 4 DBSA 12/10mm 38,4 763 CP1968 2000m
Direct Bury Rodent Resistant (Corrugated Steel Tape)
LFH Rodent Proof (corrugated steel tape)
Product Code Description Microduct size Bundle Od mm Product weight g/m Specification
8244 7DBSA 5/3 .5mm 22 .8mm 392 MHT1781
61201 7DBSA-LF 5/3 .5mm 26mm 607 CP678
612024F8 hybrid with copper cable
5/3 .5mm 15.5mm(w) x 28 .5mm(h) 358 CP1159
63945 2x2.5mm² + 12FU N/A 13-6mm 166 CP2327
Product Code Description Microduct size Bundle Od mm Product weight g/m Specification
8483 7LFSA 5/3 .5mm 23mm 470 MHT1738
- 4PELFSA 12/9 .6mm 38mm 868 CP1930
Other products may be available, please contact info@emtelle .com for further information .
Mining Applications
Emtelle can produce many different solutions depending on the customer’s specifications. Some examples of special tube bundle include:-
Specialist Applications
We
spec
ialise in tailor made products,
specific to customer and proje
ct.
What can we make for you?
What for? Mining
What for? Rodents & strength
What for? Internal rodents & strength
FibreFlow from EMTELLE
44
FibreFlow Tube bundle - Specialist Applications
44
Specialist Applications
PE-LF
PE-LF ‘pinnable’
LFH ‘pinnable’
Product Code Description Microduct Size
Bundle Od mm
Product weight g/m Specification
61874 4PE-LF pinnable 3/2 .1mm 5.4x25.4 110 CP1485
61875 7PE-LF pinnable 3/2 .1mm 8.7x14.2 190 CP1418
PE microducts surrounded by a profile extrusion in LFH providing a web to allow the product to be pinned or clipped to a wall .
Direct Bury filled metal free (DBfmf)
Product Code Description Microduct
SizeSupply Length Drum Type
Product weight per metre gms
Generic Specification
8224 3DBfmf 10/8mm 2000m 1 .7D 483 MHT18448225 4DBfmf 10/8mm 2000m 2 .0D 543 MHT18448226 5DBfmf 10/8mm 2000m 2 .0D 619 MHT18448227 7DBfmf 10/8mm 2000m 2 .2D 699 MHT1844
60025 3DBfmf 12/10mm 2000m 2 .0D 611 MHT184460026 4DBfmf 12/10mm 2000m 2 .2D 684 MHT184460027 5DBfmf 12/10mm 2000m 2 .35D 751 MHT184460028 7DBfmf 12/10mm 1000m 2 .0D 876 MHT1844
Product Code Description Microduct Size Bundle Od mm Product weight
g/m Specification
61872 1LFH pinnable 3/2 .1mm 6.0x10.0 56 .5 CP123961873 4LFH pinnable 3/2 .1mm 6.0x22.5 118 CP1330
Emtelle was the first to introduce a Metal Free range of Tube Bundles using a filling polymer between the outer sheath and the microducts providing even compression resistance and improved roundness and concentricity of the individual microducts .
Main benefits of the DB(fmf) products;�� Roundness of the Tube Bundle is secured�� Protection against; Kinking and Crush, �� Better handling characteristics in the field once HDPE sheath is removed
Emtelle have developed a range of microducts which have an LFH sheath applied over conventional PE microducts (PE-LF) and which offer enhanced fire performance compared with all-PE products . For indoor installations where only moderate LFH performance is required, and where local fire regulations reflect this, then the FibreFlow PE-LF microduct range (MHT1757 and MHT2618) may be the solution . These bundles are designed to pass the IEC 60332-1 vertical flame spread test, similar to VW-1 . Please contact your local Emtelle representative for further information .
LFH microducts surrounded by a profile extrusion in LFH providing a web to allow the product to be pinned or clipped to a wall .
What for? MDU
What for? MDU
What for? MDU
What for? Where extra protection is needed
FROM EMTELLE FibreFlow from EMTELLE
45
FROM EMTELLEFibreFlow Tube bundle - Specialist Applications
45
Specialist Applications
Fusion Product
Emtelle FibreFlow Fusion products consist of a combination of (different size) microducts to allow both fibre-unit and fibre mini-cables to be installed into the network using the same microduct bundle . This type of product is ideal for daisy-chaining a number of more remote communities or outlying areas further away from the main network trunking routes .
This type of product can usually be supplied suitable for DI, DB, Indoor or Aerial bundles . Please contact us via info@emtelle .com to discuss your requirements further .
The different DIS products have been designed specifically for installation into existing HDPE ducts or PVC ducts . The outer sheath has been manufactured with a special reduced friction skin to allow for greater installation distances whilst pushing or pulling .
Product Code Product description Microduct size Product
Weight (g/m)Supply Length
Bundle OD (mm) Data-Sheet
8248 9 WAY DISMF 5/3.5mm + 10/8 COMBO 9x 5/3.5 1x 10/8 218 1500 24 .5 MHT989
60387 3 WAY DISMF 10/8mm + 5/3.5 COMBO 3x 10/8 3x 5/3.5 209 2000 24 .7 MHT857
61841 12 WAY DBmf 7/4 + 1x 14/10 COMBO 12x 7/4 1x 14/10 467 1500 30.0 x 35.9 CP1550
62955 10 WAY DBmf 8/5 + 1x 18/14 COMBO 10x 8/5 1x 18/14 493 1000 36 CP1385
62709 21 WAY DB 5/3.5 + 3x 10/8 COMBO 21x 5/3.5 3x 10/8 720 1000 38 .3 CP2497
62970 13 WAY DImf 5/3.5 + 1x 16/13 COMBO 13x 5/3.5 1x 16/13 319 2000 29 .4 CP2803
FibreFlow from EMTELLE
46
FibreFlow Tube bundle - Pre-cabled ducts and microducts
46
Pre-cabled ducts and microducts
Pre-cabled Sub Ducts
Both traditional fibre optic and fibre mini-cables are available as a pre-installed product. Lengths of up to 10km are available dependent on the cable type and materials .Emtelle can produce various combinations of a single fibre cable in HDPE duct. This cable can be removed at a later date and upgraded as required. This configuration particularly favours fairly long-distance fibre-to-the-home (or building or MDU) deployment where neither the duct nor fibre cable are previously in place, and future installations or extensions may be called for. These product combinations are designed for direct burial in suitably prepared ground .
Common typical features �� Loose tube metal free constructions��Water blocked using gel filled tubes and dry water swellable elements�� Central strength element�� Storage and operating temperature: -30°C to +65°C
Specifications (all types)�� Available fibre types: Singlemode ITU-T G.652d, ITU-T G .655, ITU-T G .657A1, Multimode A1 (IEC 60793-2-10)�� Fibre and tube colours: normally EIA 598 or EN187105�� Cable tested to IEC 60794
Micro Trenching
Mole Ploughing Overhead
Cable Type Cable Diameter
HDPE Duct Size (OD)/(ID)
HDPE Duct Size (OD)
HDPE Duct Size (OD) (Plus web)
Fibre
Bun
dle
2 Fibre Bundle 1 .1mm 8/3 .5mm 16/10mm 6/2 .7mm4 Fibre Bundle 1 .1mm 8/3 .5mm 16/10mm 6/2 .7mm6 Fibre Bundle 1 .3mm 8/3 .5mm 16/10mm 6/2 .7mm8 Fibre Bundle 1 .5mm 8/3 .5mm 16/10mm 7/3 .7mm
12 Fibre Bundle 1 .6mm 8/3 .5mm 16/10mm 7/3 .7mm
Micro
Ca
ble 24 Fibre Micro Cable 2 .8mm 10/6mm 25/17mm 8/5mm
Mini
Cable
24 - 72 Fibre Mini Cable 6 .0mm 16/10mm 25/17mm 10/8mm96 Fibre Mini Cable 7 .2mm 20/16mm 25/17mm 16/12mm
144 Fibre Mini Cable (24 Fibres / Tube) 7 .9mm 20/16mm 25/17mm 16/12mm144 Fibre Mini Cable (12 Fibres / Tube) 9 .2mm 20/16mm 25/17mm 18/14mm288 Fibre Mini Cable (12 Fibres / Tube) 10 .5mm 20/16mm 32/20mm 20/16mm
Conv
entio
nal F
ibre C
able
12-96 fibre cable 10-12mm 31/25mm 31/25mm 25/20mm128 Fibre Cable 12-14mm 31/25mm 31/25mm 25/20mm144 Fibre Cable 12-14mm 31/25mm 31/25mm 25/20mm288 Fibre Cable 14-16mm 37/31mm 37/31mm 32/26mm
20 pair 0 .9 Copper NA 50/42mm 50/42mm N/A50 pair 0 .9 Copper NA 50/42mm 50/42mm N/A
100 pair 0 .6 Copper NA 50/42mm 50/42mm N/A100 pair 0 .9 Copper NA 63/50mm 63/50mm N/A
Ducts can be strengthened if required . Some large ploughs require larger sub-duct sizes . Other products are available .For further information on pre-cabled duct please contact us on info@emtelle .com .
FROM EMTELLE FibreFlow from EMTELLE
47
FROM EMTELLEFibreFlow Tube bundle - Loose Protected Microduct
47
Micro Trenching
Mole Ploughing Overhead
Cable Type Cable Diameter
HDPE Duct Size (OD)/(ID)
HDPE Duct Size (OD)
HDPE Duct Size (OD) (Plus web)
Fibre
Bun
dle
2 Fibre Bundle 1 .1mm 8/3 .5mm 16/10mm 6/2 .7mm4 Fibre Bundle 1 .1mm 8/3 .5mm 16/10mm 6/2 .7mm6 Fibre Bundle 1 .3mm 8/3 .5mm 16/10mm 6/2 .7mm8 Fibre Bundle 1 .5mm 8/3 .5mm 16/10mm 7/3 .7mm
12 Fibre Bundle 1 .6mm 8/3 .5mm 16/10mm 7/3 .7mm
Micro
Ca
ble 24 Fibre Micro Cable 2 .8mm 10/6mm 25/17mm 8/5mm
Mini
Cable
24 - 72 Fibre Mini Cable 6 .0mm 16/10mm 25/17mm 10/8mm96 Fibre Mini Cable 7 .2mm 20/16mm 25/17mm 16/12mm
144 Fibre Mini Cable (24 Fibres / Tube) 7 .9mm 20/16mm 25/17mm 16/12mm144 Fibre Mini Cable (12 Fibres / Tube) 9 .2mm 20/16mm 25/17mm 18/14mm288 Fibre Mini Cable (12 Fibres / Tube) 10 .5mm 20/16mm 32/20mm 20/16mm
Conv
entio
nal F
ibre C
able
12-96 fibre cable 10-12mm 31/25mm 31/25mm 25/20mm128 Fibre Cable 12-14mm 31/25mm 31/25mm 25/20mm144 Fibre Cable 12-14mm 31/25mm 31/25mm 25/20mm288 Fibre Cable 14-16mm 37/31mm 37/31mm 32/26mm
20 pair 0 .9 Copper NA 50/42mm 50/42mm N/A50 pair 0 .9 Copper NA 50/42mm 50/42mm N/A
100 pair 0 .6 Copper NA 50/42mm 50/42mm N/A100 pair 0 .9 Copper NA 63/50mm 63/50mm N/A
Loose protected microducts (see example illustrated below) are suitable for high fibre-count minicables. This tried and tested technology has been deployed over thousands of kilometres, providing excellent installation characteristics for cables from 24 to 144 fibres.The loose protected microduct solution comprises a range of microduct that are composed of standard, strong HDPE tubing as the outer duct, with a super smooth silicone coating inside . This outer duct provides complete protection of cables before, during and after installation . The smooth silicone coating remains in the duct to facilitate future repairs and/or replacements .
Loose protected microducts offer many advantages, including:�� Ease of installation�� Optimum impact resistance for maximum durability and performance�� Freedom of choice when choosing micro-duct configuration�� Optimal utilisation of cable networks with minimal expansion costs�� Option to upgrade networks in step with the development of new fibres�� Colour coding that facilitates the identification of different routes�� Customer-specific duct lengths�� Excellent blowing performance
The illustration shows the difference between the two types of cable installation . The new microduct technology has been applied to the orange duct, with the microducts loosely installed in the HDPE duct. The minicables with the required number of fibres can subsequently be installed individually in the microducts . Traditional technology has been used for the red duct and only a single fibre cable has been installed; installations of this kind often fail to make full use of the duct capacity .
The subducts can be supplied as:�� Standard HDPE (smooth exterior and interior)�� HDPE with smooth interior silicone coating�� HDPE with ribbed interior�� HDPE with ribbed interior silicone coating
Loose Protected Microduct
�� Configure the loose protected microduct according to your own wishes.�� Free combination of microducts 14, 12, 10, 7 and 5mm, fibre cables and copper cables .�� other configurations can be made upon request.�� rule of thumb: Filling area above 60% generally reduces fibre blowing lengths.�� option: loose protected microduct can be made with a combination of microducts and fibres.
Microduct w/silicone + ribs
32mm 40mm 50mm
3 x 10 mm 5 x 10 mm 10 x 10 mm
4 x 10 mm 6 x 10 mm 7 x 10 mm
2 x 12 mm 4 x 12 mm 7 x 12 mm
3 x 14 mm 6 x 12 mm
1 x 12 mm + 9 x 10 mm
2 x 12 mm + 8 x 10 mm
3 x 12 mm + 6 x 10 mm
4 x 12 mm + 5 x 10 mm
5 x 14 mm
3 x 16 mm
Examples
It is possible to install a number of microducts in a subduct . The actual number depends on the number and diameters of the microducts. Some examples are listed below.
The availability of a 12mm Lock & Block kit means that Loose Protected Microduct can now successfully be used with Microcable FU . For further details refer to pages 11 and 81 .
FibreFlow from EMTELLE
48
FibreFlow Tube bundle - tight protected microduct
48
FibreFlow from EMTELLEFibreFlow Tube bundle - tight protected microductFibreFlow Tube bundle - Storage and Handling
48
1. FibreFlow TUBE BUNDLES – TEMPERATURE & STORAGEThe tube bundles and packaging materials are resistant to a wide temperature range . Packaging materials are provided to protect products prior to installation . Emtelle stipulate that the packaging supplied should remain in place until the product is installed .If packaging needs to be replaced, please contact Emtelle for details of suitable materials for re-packaging .Prolonged storage outdoors may reduce the performance of the tube bundles . If the client requires products to be stored for periods of over 3 months prior to installation, it is a requirement that they inform Emtelle so that product and packaging specifications can be amended to suit .
2. TUBE ASSEMBLY STORAGE AND HANDLING / INSTALLATIONPoly Ethylene (PE) products, e .g . Direct Install (DI), Direct Bury (DB), Direct Bury Reinforced (DBR) are best stored between -40°C and +60°C (Product temperature, not air temperature), and handled between -20°C and +40°C. If stored outdoors, we recommend they are stored out of direct sunlight, and installed within 3 months of delivery . In some countries storage in direct sunlight, can cause the temperature of the products to increase to over +60°C. This will invalidate the product warranty .Individual Microducts, both Poly Ethylene (PE) and Low Fire Hazard (LFH) should be stored indoors . These products are wrapped in black film and bubble wrap after manufacture. This protective packaging should remain in place until installation . Individual microducts should not be exposed to direct sunlight.
LFH products can be stored between -20°C and +60°C and handled for installation between 0°C and+40°C. Handling/installation outside this temperature range can result in tube softening, distorting and possibly cracking. Please note that the maximum air pressure used when fibre bundle blowing in LFH products is 10 bar / 150psi with a maximum tube temperature of +40°C.
3. TEMPERATURE VARIATION:As stated above, Emtelle tube bundles can be stored in a temperature window of -40°C and +60°C. Though the tube bundles can accommodate these temperatures, however in some countries the product temperature between day time and night time can vary by 40°C or more . In these circumstances, the outer coils of the tube bundle on the drum will experience high levels of thermal expansion and contraction. This extreme temperature cycling can cause product failure or deterioration in performance . If this type of temperature cycling cannot be avoided then Emtelle should be informed so that they can provide advice and options for safe storage of the product .
4. TUBE ASSEMBLIES IN OPERATIONOnce the tubing assemblies are in their fixed operational location, they can be subject to the ‘storage’ temperatures quoted above, provided that there is no significant continuous flexing of the tube assemblies . Most installations are laid in underground ducts and so see minimal variation in position or temperature . Minimum temperatures of -40°C are permissible after installation .
Assemblies located in outdoor (e .g . overhead) routes will experience temperature cycling and expand and contract with the weather and there will be considerable continuous flexing of the tube assemblies . Consult Emtelle for advice on the correct product to use in this situation .Products intended for underground installation e .g . direct burial or direct install products which are installed above ground, (i .e ., up walls) should be covered with a suitable UV protective material to eliminate the risk of UV degradation . 5. HANDLING PRODUCT AND OFF-LOADINGOur products are loaded into containers using Rhino horns or forklifts with extendable arms. A normal forklift or tractor with attachments can be used if care is taken . Please carry out risk assessments and ensure you have effective lifting equipment ready for the unloading of trucks or containers .(as shown below)
Please note the following when offloading:�� Do not off-load near overhead power lines .�� Ensure a safe location for off-loading – flat, firm, level ground, free from obstacles and obstructions .�� Only authorised personnel should be in the vicinity during off-loading operations .�� It is the responsibility of the driver of the off-loading vehicle to ensure all personnel are kept at a safe distance whilst off-loading .�� Pallets, drums or loose lengths should not be dropped or thrown from the vehicle .�� Duct in coil form contains a great deal of stored energy and should be handled with care . Particular care should also be taken to avoid any damage to the restraining straps .�� In wet and frosty conditions duct and drums can become very slippery; therefore care is required when operating in these conditions .�� There must be provision made when storing products externally that they are adequately handled with the use of forklifts and drum handling equipment . All drums should be secured in position using adequate fixings. Drums should be stacked no more than 3 metres high .�� Tube bundles which are being batched down at the custom-er’s premises should be rewound using a power pay-off . All free ends of tube bundles should be sealed using heat shrink end caps . These are available from Emtelle if required .
While every care is taken during loading, Emtelle cannot accept responsibility for the security of the load once it leaves our site . Drivers must secure their loads before leaving the factory, as under the terms of the Road Haulage Association they are responsible for the security of the load .
The drums must be stored on a level, hard surface above flood level and must be secured with chocks to prevent the drums from rolling away . Avoid contact with sharp rocks. Do not lay the drums flat, the drums must be stored as pictured below .
6. UNSPOOLING THE TUBE BUNDLESThe tubes and tube bundles supplied by Emtelle are supplied in coils or on drums . When uncoiling the products, the drums should be slowed to freely rotate (preferably using a drum trailer as shown below), so the products is unwound without any excess coiling. Never lay the drum or coil on its side and pull the tube bundles ‘off the top’, as this will induce a corkscrew twist (as shown in the photographs below), possible distortion and cause problems during installation and blowing .
Tube bundles should not be uncoiled off the top of the drum
The best practice is to install drums onto drum
trailers as pictured:
Storage and Handling
FROM EMTELLE FibreFlow from EMTELLE
49
FROM EMTELLE FibreFlow Accessories
49
Connectors
FibreFlow from EMTELLE
50
FibreFlow Accessories
50
Microductouter diam -
mm
Connector through bore diam - mm
Product codes
Solid colour clear
3 2 .1 73124 2 .8 710705 3 .5 72236 4 .8 7310
6 .3 5 79308 6 72228 4 7272510 7 .6 722612 10 7263 973216 14 7142418 16 70956
Microduct size (both ends) Product codesouter diam -
mminner diam -
mm Solid colour clear
7 3 .5 711087 4 .0 7119012 10 7273814 10 71105
16 10 71424B
Straight connectors Direct Bury Straight connectors
Micro ductouter diam -
mm
Connectorinner diam -
mm
Micro ductouter diam -
mm
Connectorinner diam -
mm
Product codes
Solid colour clear
4 2 .2 3 2 .2 707285 2 .2 3 2 .2 96386 2 .2 3 2 .2 70727
(¼”)6 .3 3 .5 5 3 .0 95027 3 .5 5 3 .5 711428 6 5 3 .5 6085
10 6 .3 8 6 .3 728012 8 10 8 727912 10 8 6 71277
Reducers
Connectors
End Cap
SizeProduct Code
Solid colour clear3mm 96104mm 707625mm 72216mm 73118mm 60268mm 72726
10mm 9611 748612mm 961216mm 7143818mm 72740
FROM EMTELLE FibreFlow from EMTELLE
51
FROM EMTELLE FibreFlow Accessories
51
Connectors
This connector is to protect fibre where a centre blow has taken place. The closedown covers the fibre and both ends of the break in the microduct .
Closedown
Size Product Code3mm 73165mm 72498mm 7331
Size Product Code7mm 7110914mm 71106
Direct Bury End Cap
An active gas block (GB) connector has an internal seal that can be ‘open’ to permit blowing through, or ‘closed’ so the seal contacts the fibre and prevents the flow of gas.
Microduct sizemm Description Product Code Fibre cable size range
Approx mm Gas block seal colour
3mm 3GB long 70730 0 .9-1 .23mm 3GB short 70731 0 .9-1 .24mm 4GB 70729 0 .9-1 .25mm 5GB 6091 FU6mm 6GB 71220 FU
6-3mm reducer 6-3GB 71355 FU6-4mm reducer 6-4GB 70875 FU
7mm 7GB 1 .0-1 .6 71110 FU7mm 7GB 1 .8-2 .4 71533 Red7mm 7GB 2 .5-3 .0 71116 2 .5-3 .0 Blue8mm 8GB 6086 FU
8-5mm 8-5GB 6087 FU10mm 10GB 5 .5-6 .6 71496 5 .5-6 .6 Green10mm 10GB 6 .5-7 .2 71497 6 .5-7 .2 Red12mm 12GB 5 .5-6 .6 71498 5 .5-6 .6 Green12mm 12GB 6 .5-7 .2 71499 6 .5-7 .2 Red12mm 12GB 7 .2 - 8 .2 71534 7 .2-8 .2 Blue14mm 14GB 6 .5-7 .2 71107 6 .5-7 .2 Red14mm 14GB 7 .6-8 .2 71535 7 .6-8 .2 Blue
Gas Block Connectors
FibreFlow from EMTELLE
52
FibreFlow Accessories
52
Connectors
These connectors are used at the end of a fibre unit (fu) length, usually inside the building, to prevent water from travelling along the tube and into the building .The passive water blocking types have a fixed aperture size in the seal, the fibre unit being pushed through by hand after blowing is complete . For these it is best to select an item with a suitably sized seal, to give a snug fit.We quote the size range of fibre unit or cable that each water blocking connector can accept and properly seal onto .
A connector used mainly in rack systems to manage microducts
Water-blocking Connector Slimline Bulkhead
Size Product Code5mm 7248
3mm 7314 5mm 6089
Tube size one end
Tube size other end
Capacity fu or fc diam Product code
3mm 3mm FU 73145mm 5mm push-on FU 60896mm 3mm FU 71441
FROM EMTELLE FibreFlow from EMTELLE
53
FROM EMTELLE FibreFlow Accessories
53
Microduct Connectors
Microduct size (both ends) Product codesouter diam - mm inner diam - mm
3 2 .1 99164 2 .8 99175 3 .5 99187 5 .5 99197 3 .5 701938 6 99208 3 .5 977210 8 992112 10 992214 12 982114 10 992316 12 9924
Straight connectors
Straight connectors are used to join microducts having the same OD and ID . Take note of both the outer and inner diameter of the microduct to be connected . eg 8/6 connectors are unsuitable for 8/3 .5 microduct . Some connectors are available pre-fitted with clip-on protectors to enable direct burial for FTTH drop zones .
Emtelle provides an extensive range of standard and direct buried push-fit connectors for the FibreFlow system . These connectors are provided with outer shells in either acrylate (clear) or polypropylene (solid colour) . The different materials provided are to suit customer’s preferences or applications . All connectors supplied by Emtelle conform to our specification MHT860.
Microduct A Microduct BProduct codesMicroduct
outer diam - mm
Microduct inner diam
- mm
Microduct outer diam
- mm
Microduct inner diam
- mm5 3 .5 3 2 .1 99255 2 .1 3 2 .1 99267 5 .5 3 2 .1 704077 5 .5 5 3 .5 700318 3 .5 3 2 .1 701178 6 5 3 .5 9927
10 8 8 6 992812 10 5 3 .5 7003412 10 7 5 .5 992912 10 10 8 993014 10 10 8 7003514 10 12 10 993116 12 12 10 70036
Reducers
These connectors join microducts of different size . Check the microduct OD and ID .
Size Product Code3mm 9932
4mm 9933
5mm 9934
6mm 9975
7mm 9935
8mm 9936
10mm 9937
12mm 9938
14mm 9939
16mm 70153
End Cap
End caps are used to seal an open tube and prevent dirt or water entry .
FibreFlow from EMTELLE
54
FibreFlow Accessories
54
Microduct Connectors
Product code Microduct size Description70194 7/3 .5mm Protected connector70169 7/5 .5mm Protected connector70262 8/3 .5mm Protected connector70136 8/6mm Protected connector70170 10/8mm Protected connector70171 12/10mm Protected connector70172 14/10mm Protected connector
The protected connector is a standard microduct connector pre-fitted with a removable outer shell. The product offers enhanced protection over an uncovered connector. These covers also fit over equivalent sized end-caps .
Direct Buried ConnectorsThere are situations with drops to a building where a joint is required in a rugged microduct . Since such a joint would be in domestic areas rather than industrial sites, a full closure to protect the microduct joint is not always deemed necessary .For these joints, we offer rugged connectors, and in two styles:
Connectors
Product Code Description Duct
OD Seal Pack Quantity Seal Colour
Cable Range
72133 Miniduct seal 4mm/0 .9mm 4 0 .9 100 Per Bag Purple 0 .9-1 .273909 Miniduct seal 4mm/1 .25mm 4 1 .25 100 Per Bag Red 1 .3-1 .572314 Miniduct seal 4mm/1 .6mm 4 1 .6 100 Per Bag Green 1 .6-1 .872315 Miniduct seal 4mm/2 .1mm 4 2 .1 100 Per Bag Blue
71907 Miniduct seal 5mm/0 .9mm 5 0 .9 100 Per Bag Purple 0 .9-1 .271720 Miniduct seal 5mm/1 .25mm 5 1 .25 100 Per Bag Red 1 .3-1 .573570 Miniduct seal 5mm/1 .6mm 5 1 .6 100 Per Bag Green 1 .6-1 .872318 Miniduct seal 5mm/2 .1mm 5 2 .1 100 Per Bag Blue 1 .9-2 .2
73572 Miniduct seal 6mm/0 .9mm 6 0 .9 100 Per Bag Purple 0 .9-1 .171739 Miniduct seal 6mm/1 .25mm 6 1 .25 100 Per Bag Red 1 .2-1 .573573 Miniduct seal 6mm/1 .6mm 6 1 .6 100 Per Bag Green 1 .6-1 .873574 Miniduct seal 6mm/2 .1mm 6 2 .1 100 Per Bag Blue 1 .9-2 .273575 Miniduct seal 6mm/2 .5mm 6 2 .5 100 Per Bag Yellow 2 .3-2 .5
71962 Miniduct seal 7mm/0 .9mm 7 0 .9 100 Per Bag Purple 0 .9-1 .171175 Miniduct seal 7mm/1 .25mm 7 1 .25 100 Per Bag Red 1 .2-1 .572319 Miniduct seal 7mm/1 .6mm 7 1 .6 100 Per Bag Green 1 .6-1 .872320 Miniduct seal 7mm/2 .1mm 7 2 .1 100 Per Bag Blue 1 .9-2 .271724 Miniduct seal 7mm/2 .5mm 7 2 .50 100 Per Bag Yellow 2 .3-2 .5
73234 Miniduct seal 8mm/0 .9mm 8 0 .9 100 Per Bag Purple 0 .9-1 .171740 Miniduct seal 8mm/1 .25mm 8 1 .25 100 Per Bag Red 1 .2-1 .573578 Miniduct seal 8mm/1 .6mm 8 1 .6 100 Per Bag Green 1 .6-1 .873826 Miniduct seal 8mm/2 .1mm 8 2 .1 100 Per Bag Blue 1 .9-2 .271741 Miniduct seal 8mm/2 .5mm 8 2 .50 100 Per Bag Yellow 2 .3-2 .5
Easy to install gas and watertight seal for cables in mini / micro ducts .�� Gas and Water tight up to 0,25 bar �� Suitable for retro fitting�� Easy installation�� No need to slide the seal over the fibre for installation�� Slim design
Fibre and Micro cable seal
Protected Connectors
�� Protected Connector �� DB (direct buriable) connector
FROM EMTELLE FibreFlow from EMTELLE
55
FROM EMTELLE FibreFlow Accessories
55
Connectors
Divisible duct sealing sets developed to provide an effective and simple solution to all gas and watertight duct sealing requirements . The modular system enables installation in new and existing situations. Set contains 2 plastic click shells, plastic cutting block, synthetic rubber plug .
Duct Sealing
Emtelle Product code Description Duct Size
(OD)Cable
DiameterSize A(mm)
Size B(mm)
Supply qty (per box)
73080 MINI DUCT CABLE SEAL 10 (2 .5-1 .5mm)
10
1 .5 - 2 .5
32 25 2571161 MINI DUCT CABLE SEAL 10 (3 .5-2 .5mm) 2 .5 - 3 .5 71162 MINI DUCT CABLE SEAL 10 (5 .0-3 .5mm) 3 .5 - 5 .0 71163 MINI DUCT CABLE SEAL 10 (6 .5-5 .0mm) 5 .0 - 6 .5 71164 MINI DUCT CABLE SEAL 10 (7 .5-6 .5mm) 6 .5 - 7 .5
73561 MINI DUCT CABLE SEAL 12 (2 .5-1 .5mm)
12
1 .5 - 2 .5
32 25 25
71165 MINI DUCT CABLE SEAL 12 (3 .5-2 .5mm) 2 .5 - 3 .5 71166 MINI DUCT CABLE SEAL 12 (5 .0-3 .5mm) 3 .5 - 5 .0 71167 MINI DUCT CABLE SEAL 12 (6 .5-5 .0mm) 5 .0 - 6 .5 71168 MINI DUCT CABLE SEAL 12 (8 .0-6 .5mm) 6 .5 - 8 .0 73339 MINI DUCT CABLE SEAL 12 (8 .5-7 .0mm) 7 .0 - 8 .5
18700 MINI DUCT CABLE SEAL 14 (1 .5-2 .5mm)
14
1 .5 - 2 .5
34 29 25
18701 MINI DUCT CABLE SEAL 14 (3 .5-2 .5mm) 2 .5 - 3 .518702 MINI DUCT CABLE SEAL 14 (5 .0-3 .5mm) 3 .5 - 5 .071833 MINI DUCT CABLE SEAL 14 (6 .5-5 .0mm) 5 .0 - 6 .5 71169 MINI DUCT CABLE SEAL 14 (8 .0-6 .5mm) 6 .5 - 8 .0 71170 MINI DUCT CABLE SEAL 14 (10 .0-8 .0mm) 8 .0 - 10 .0
18697 MINI DUCT CABLE SEAL 16 (2 .5-1 .5mm)
16
1 .5 - 2 .5
34 29 25
18698 MINI DUCT CABLE SEAL 16 (3 .5-2 .5mm) 2 .5 - 3 .572007 MINI DUCT CABLE SEAL 16 (5 .0-3 .5mm) 3 .5 - 5 .071978 MINI DUCT CABLE SEAL 16 (6 .5-5 .0mm) 6 .5 - 5 .071171 MINI DUCT CABLE SEAL 16 (8 .0-6 .5mm) 6 .5 - 8 .0 71172 MINI DUCT CABLE SEAL 16 (10 .0-8 .0mm) 8 .0 - 10 .0
18703 MINI DUCT CABLE SEAL 18 (5 .0-3 .5mm)
18
3 .5 – 5 .0
36 34 2518704 MINI DUCT CABLE SEAL 18 (6 .5-5 .0mm) 5 .0 - 6 .518705 MINI DUCT CABLE SEAL 18 (8 .0-6 .5mm) 6 .5 - 8 .072789 MINI DUCT CABLE SEAL 18 (9 .5-8 .0mm) 8 .0 - 9 .571173 MINI DUCT CABLE SEAL 18 (12 .0-9 .4mm) 9 .4 - 12 .0
73567 MINI DUCT CABLE SEAL 20 (5 .0-3 .5mm)
20
3 .5 - 5 .0
36 34 2573343 MINI DUCT CABLE SEAL 20 (6 .5-5 .0mm) 5 .0 - 6 .573344 MINI DUCT CABLE SEAL 20 (8 .0-6 .5mm) 6 .5 - 8 .072145 MINI DUCT CABLE SEAL 20 (10 .0-8 .0mm) 8 .0 - 10 .071174 MINI DUCT CABLE SEAL 20 (12 .0-9 .4mm) 9 .4 - 12 .0
FibreFlow from EMTELLE
56
FROM EMTELLE Emtelle Solutions Team
57
S O L U T I O N S T E A M
Emtelle now have a brand-new dedicated solutions team . The Emtelle Solutions team consists of product and installation specialists with expertise in their assigned field. We encourage our customers to make use of the knowledge and experience within the Solutions Team to help continue developing innovative, reliable & future-proof solutions for our customers adding value to FTTX networks globally .
The Solutions Team’s experience is spread over 25 years of global customer, product and project knowledge . The team focuses on developing new solutions that can be brought to market, growing Emtelle’s portfolio building on the significant benefits our solutions already bring to operators, including reduced total cost of network deployments through easier installation methods, and a reduced need for equipment and specialist skills .
Emtelle’s aim is to share our experience and knowledge first-hand with our customers, and the new Solutions Team will accelerate this .
Within the team, we have product specialists covering the following areas: Fibre Pre-connected Tube Bundle Connectors Cabinets Closures
And we have installation specialists covering: Moleplough Overhead Microtrench Opentrench MDU PVC Datacentre DPA/PIA 5G, IoT & Smart Cities
Find your Product Specialist now at
www .emtelle .com/emtelle-solutions-team
FibreFlow Pre-cabled solutions
58
HeadquartersEmtelleHaughheadHawickTD9 8LFUnited Kingdom
Tel : + 44 (0)1450 364000Fax : + 44 (0)1450 364001E: [email protected]
Emtelle GmbHAn der Flurscheide 20 99098 Erfurt Germany
Tel : + 49 (0) 361 654 330 Fax: + 49 (0) 361 654 33 20 E: [email protected]
Emtelle ScandinaviaVardevej 1407280 Sønder FeldingDenmark
Tel: +45 86 28 84 88Fax: +45 86 28 81 52E: [email protected]
To find contact details on your direct sales representative in your region, visit www.emtelle.com
www.emtelle.com
ISO 9001
ISO 14001
BS OHSAS 18001
ISO 50001