•Results on the basis of loading
methodology
•Use of RBE-2 element
•Use of RBE-3 element
•Use of PCL function to apply distributive load (along
the length the load was uniform)
•Use of PCL function to apply distributive load (along
the length the load was distributive)
(the load was point load with 1000N it is a assumption load)
The displacement result due to application of 1000N load
2nd design changed model displacement result
METHODS WITH FEATURE WITHOUT FEATURES
RBE-2 4.55E-02 4.58E-02
RBE-3 4.83E-02 4.86E-02
uniform along the length
2.61E+00 2.60E+00
distributive along the length
2.90E-01 2.89E-01
Graph representation of displacement result with respect to deferent loading methods
Displacement result using RBE-2 element
With feature Without feature
Displacement result using RBE-3 element
With feature Without feature
Displacement result Use of PCL function to apply distributive load (along the length the load was uniform)
With feature Without feature
Displacement result Use of PCL function to apply distributive load (along the length the load was distributive)
With feature Without feature
The vonmises stress result due to application of 1000N load
2nd design changed model vonmises stress result
METHODS WITH FEATURE WITHOUT FEATURES
RBE-2 2.34E+01 2.15E+01
RBE-3 2.34E+01 2.15E+01
uniform along the length
1.25E+03 1.14E+03
distributive along the length
1.39E+02 1.26E+02
Graph representation of Vonmises stress
Vonmises stress result using RBE-2 element
With feature Without feature
Vonmises stress result using RBE-3 element
With feature Without feature
Vonmises stress result Use of PCL function to apply distributive load (along the length the load was uniform)
With feature Without feature
Vonmises stress result Use of PCL function to apply distributive load (along the length the load was distributive)
With featureWithout feature
2nd design change of base model displacement & vonmises stress result/different loading methods followed