P R O V E N Q U A L I T Y. L E A D I N G T E C H N O L O G Y.
Process EquipmentPumps and Accessories
Transfer Pumps and Packages
Air-Operated Double-Diaphragm Pump Features• Quick priming and immediate flow of product
• Handles fluid viscosities up to 5,000 cps and solids up to 0.09 in. (2.29 mm)
• Runs dry without damage
• Provides air-tight seal for moisture-sensitive fluids
• Easy-out seal provides fast slide in and out of drums (through bung adapter) without disconnecting hoses
• Easy-out seal accommodates slightly off-sized drums up to 2-1/2 in. (63.5 mm)
• Pump is never immersed inside the drum (only the suction tube is immersed)
• Excellent for abrasive, low-to-medium viscosity fluids and shear sensitive materials
Piston Transfer Pump Features• Air-powered for high reliability and low cost
• Handles applications ranging from cleaning to corrosive fluid transfer
• Excellent abrasion and corrosion resistance using Graco Severe Duty® wear parts
• Divorced air motor eliminates fluid and fume contamination to help reduce maintenance
• Stainless or carbon steel models suitable for most production applications (2:1 in SST only)
2
The Quality & Simplicity Inside!
Easy Maintenance•Low internal volume reduces waste
and makes clean-up easy.
•Stainless steel bolts resist corrosion and provide positive positioning for easy reassembly.
Unique, Patented Air Valves•Three-way Pilot Valve for non-sticking
operation.
•All parts are replaceable without opening wet body parts.
•Aluminium parts are anodized or epoxy-coated to resist corrosion usually caused by dirty air.
•No air-line lubrication required.
Precision-Fitted Parts•Long-wearing End-Bearings assure
positive rod alignment and are easilyreplaced.
Protective Exhaust Port•Common port for all exhaust prevents
vapors in room from attacking air motor seals.
•Easily submerges for sump or disposal operations.
Rugged Exterior Construction•Construction resists corrosion,
prevents leakage and ensures clean fluid changes.
•Anodizing on aluminum wetted parts and e-coat epoxy air section resists tough environments.
Fluid Compatibility•Housings available in aluminium,
stainless steel, polypropylene, groundable acetal or Kynar.
Positive Seal Design•Diaphragm firmly locked in place.
•Formed bead acts as positive fluid seal.
•One thru-hole.
Heavy-Duty Washers• Positive grip washers virtually
eliminate leakage and pull-out,preventing costly downtime.
Long-Lasting Rod Design• 300 Series stainless steel rod
designed for long life and corrosionresistance — even in wet air.
G
H
I
J
K
B
C
A
D
E
F
Easy Alignment•Bolted, self-aligning air and fluid sections
Fluid Control Choice
•Wide range of seat and ball options ensure fluid compatibility and positive seal for maximum efficiency, long life and better suction lift.
3
Husky Features
A
B
C
D
E
F
G
H
I
J
K
Air-Operated Double-Diaphragm Pumps
Model(bspt portsavailable)
Maximum Flow Rate*
Materials ofConstructionAvailable
1/4 in. (6.35 mm)ports Standard or remote air valve
3/8 in. (9.4 mm)ports
1/2 in. (12.7 mm) middle ports; 3/4 in. (19.05 mm) end portsStandard or remote air valve
3/4 in. (19.05 mm)ports
Standard or remote air valve
1 in. (25.4 mm)ports
Standard or remote air valve
19 l/min. 26 l/min. 57 l/min. 61 l/min. 151 l/min.
Polypropylene, Groundable Acetal, Kynar(PVDF)
Groundable Acetal,Polypropylene
Polypropylene,Groundable Acetal, Kynar(PVDF)
Aluminium,316 SST
Polypropylene,Groundable Acetal, Kynar(PVDF)
Husky 205 Husky 307 Husky 515 Husky 716 Husky 1040
1 in. (25.4 mm)ports
Standard or remote air valve
151 l/min.
Husky 1040
Aluminium,316 SST
Model(bspt portsavailable)
Maximum Flow Rate*
Materials ofConstructionAvailable
1-1/2 in. (38.1 mm) ports
Standard or remote air valve
1-1/2 in. (38.1 mm)ports
Standard or remote air valve
2 in. (50.8 mm)ports
Standard or remote air valve
2 in. (50.8 mm)ports
Standard or remote air valve
3 in. (76.2 mm) ports
379 l/min. 379 l/min. 568 l/min. 568 l/min. 1041 l/min.
Polypropylene, Kynar (PVDF)
Aluminium,316 SST
Polypropylene, Kynar (PVDF)
Aluminium,316 SST,Ductile Iron
Aluminium
Husky 1590 Husky 1590 Husky 2150 Husky 2150 Husky 3275
*Flow rates are with muffler and do not vary based on diaphragm material.
Model Overview
4
Typical Process System Diagram
Air Compressor
• Twistork™ (shown)• Bare Back-Geared Agitator• 200 Liter Drum Siphon Kits
Leak detector
Air Regulator
Air Filter(not shown)
• Surge Suppressor (shown)• Bag Filters
Application Dispense Systems:• Paint/solvent transfer• Chemical transfer• Wastewater/pH control• Batching/dosing
Flange kits
Husky™ 1040 (shown)
Air
Fluid
Exhaust
Key
Equipment and accessoriesnot shown to scale.
Muffler (standard with all models)
5
Bolted DesignThe standard bolted design of Husky pumps guaranteesefficiency and safety. Husky pumps are easy-to-serviceand virtually leak-free.
Air ValveHusky™ air-operated double-diaphragm pumps feature simple, extremely reliable air valve designs that make the Husky line among the most dependable pumps in a variety of applications.
• Three-way pilot valve for non-sticking operation and minimal air leakage
• All parts replaceable without opening wetted body parts
• Anodized or epoxy-coated aluminium parts resist corrosion from dirty air
• Fewer moving parts than most other double-diaphragm pumps
Product Guarantee
Husky air operated double-diaphragmpumps come with a 15-YEAR Center Section Warranty and a 5-YEAR Pump Wetted-End Warranty*
* See pump instruction manuals for complete warranty details.
Leak Detector
Designed to detect and prevent leaks from double-diaphragm pumps, it captures fluid expelled through the exhaust when a diaphragm ruptures.
Two types are available:
• 239080 (Polypropylene wetted parts)• 239081 (SST wetted parts)
Shut-Off Valve Kit*Stops any fluid from entering the leak detector when the pump is shut down.
Kit #239114 includes:
• 1/4 in. (6.35 mm) tube x 1/8 npt tube connector, 3/4 in. (19.05 mm) closed SST nipple, brass tube tee, sleeveless bushing and shut-off valve
* Not shown
Husky 750 - 3/4 in. (19.05 mm) and Husky 2000 - 2 in. (50.8 mm) Surge Suppressors
Surge suppressors reduce pressure spikes caused by the pumping action of diaphragm pumps. Used on the pump inlet, surge suppressors control pressure fluctuations and acceleration loss that can lead to cavitation.
• Polypropylene, Acetal and SST materials of construction• Bladder/Bellow Materials: Buna-N, PTFE (bellow) and Fluoroelastomer• Can be used on Husky 307 – 3/8 in. (9.53 mm) through Husky 2150 – 2 in. (50.8 mm) pumps
The Graco Difference
Accessories
6
Technical Specifications
Air-Operated Double-Diaphragm & Transfer Pumps
Popular ModelsPART NO. WETTED PARTS SEATS BALLS/CHECKS DIAPHRAGMS
Husky™ 205 : 1/4 in. (6.35 mm) portsD12091 Polypropylene None Polypropylene PTFED11021 Acetal None Acetal PTFED150A1 Kynar (PVDF) None Kynar PTFE
Husky 307 : 3/8 in. (9.52 mm) portsD3A211 Acetal Acetal PTFE PTFED3A331 Acetal SST SST PTFED3A277 Acetal Acetal Buna-N Buna-ND3A255 Acetal Acetal Hytrel HytrelD3B966 Polypropylene Polypropylene Santoprene Santoprene
Husky 515 : 1/2 in. (12.7 mm) middle ports; 3/4 in. (19.05 mm) end portsD5B911 Polypropylene Polypropylene PTFE PTFED5EA11 Kynar Kynar PTFE PTFED5A211 Acetal Acetal PTFE PTFED5A277 Acetal Acetal Buna-N Buna-ND5B966 Polypropylene Polypropylene Santoprene Santoprene
Husky 716 : 3/4 in. (19.05 mm) portsD5C277 Aluminium Acetal Buna-N Buna-ND5C211 Aluminium Acetal PTFE PTFED5D311 SST SST PTFE PTFED5D211 SST Acetal PTFE PTFE
Husky 1040 : 1 in. (25.4 mm) portsD71211 Acetal Acetal PTFE PTFED72911 Polypropylene Polypropylene PTFE PTFED72966 Polypropylene Polypropylene Santoprene SantopreneD7CGGG Aluminium Geolast Geolast GeolastD7C311 Aluminium SST PTFE PTFED7C525 Aluminium Hytrel Acetal HytrelD7D311 SST SST PTFE PTFED7D331 SST SST SST PTFE
Husky 1590 : 1-1/2 in. (38.1 mm) portsDB2911 Polypropylene Polypropylene PTFE PTFEDB5A11 Kynar Kynar PTFE PTFEDBCGGG Aluminium Geolast Geolast GeolastDBC525 Aluminium Hytrel Acetal HytrelDBC666 Aluminium Santoprene Santoprene SantopreneDBD311 SST SST PTFE PTFE
Husky 2150 : 2 in. (50.8 mm) portsDF2666 Polypropylene Santoprene Santoprene SantopreneDF2911 Polypropylene Polypropylene PTFE PTFEDF5A11 Kynar Kynar PTFE PTFEDFC311 Aluminium SST PTFE PTFEDFCGGG Aluminium Geolast Geolast GeolastDFD311 SST SST PTFE PTFEDFF466 Ductile Iron Hardened SST Santoprene SantopreneDFFGGG Ductile Iron Geolast Geolast Geolast
Husky 3275 : 3 in. (76.2 mm) portsDK3525 Aluminium Hytrel Acetal Hytrel
DK3311 Aluminium Stainless Steel PTFE PTFEDK3666 Aluminium Santoprene Santoprene SantopreneDK3GGG Aluminium Geolast Geolast Geolast
All air-operated double-diaphragm configurations are also available in remote versions, except for the Husky 307 and 3275.
All models can be equipped with both BSP and NPT porting.
PART NO. DESCRIPTION CONSTRUCTION PACKING
Transfer Pumps226940 Fast-Flo® 1:1 Drum, Carbon Steel, 304 SST (UL, CE) PTFE, Leather226941 Fast-Flo 1:1 Drum, Carbon Steel, 304 SST (UL) Polyethylene295616 T2 2:1 Drum, 303-304 SST PTFE224350 Monark™ 5:1 Drum, 304 SST UHMWPE, PTFE224348 President™ 10:1 Drum, 304 SST UHMWPE, PTFE
7
Reference Guide
Ordering Information
Acetal Material used for seats, balls & wetted body parts
• Wide range of solvent resistance
• Withstands extreme fatigue
• Good level of abrasion-resistance
• Groundable for use with flammables
• Not for acids or bases
Aluminium Material used for air motor & wetted body parts
• Medium corrosion and abrasion resistance
• Not for use with HHC’s
Hardened Stainless Steel Material used for seats & balls
• Moderate chemical resistance
• Good abrasion resistance
Kynar Material used for wetted body parts & seats
• Strong chemical resistance: acids and bases
• Good abrasion resistance
• High temperature resistance
Polypropylene Material used for air motor, wetted body parts, seats & balls
• Wide chemical compatibility
• General purpose
• Inexpensive alternative
Stainless Steel Material used for wetted body parts, seats & balls
• High level of corrosion and abrasion resistance
• Passivated for use with waterbase coatings
Buna-N Material used for balls & diaphragms
• Good for petroleum based fluids
• Not for strong solvents or chemicals
8
Wetted Parts Material Options
Hytrel Material used for seats, balls & diaphragms
• Good abrasion resistance
• Often substituted for Buna-N
Santoprene Material used for seats, balls & diaphragms
• Good abrasion and chemical resistance
• Not for use with solvents
• Can substitute for EPDM or EPR
PTFE Material used for seats, balls & diaphragms
• Excellent when used with solvents
• Poor abrasion resistance
• Widest chemical compatibility with fluids
Fluoroelastomer Material used for seats, balls & diaphragms
• High level of corrosion resistance with acids
• Resists unleaded fuels
Geolast Material used for seats, balls & diaphragms
• Good abrasion resistance
• Same chemical compatability as Buna and Hytrel
Ductile Iron Material used for wetted body parts
• High abrasion resistance
• Low cost alternative to stainless steel
Neoprene• Good abrasion and chemical resistance
• Not for use with solvents
Ordering Information
Seats:Balls:Diaphragms
xxx 211 Acetal:PTFE:PTFELow solids paints, stains and lacquers; flammable solvents - use with aluminum, SST or goundable acetal housings
xxx 331 Stainless Steel:Stainless Steel:PTFEMedium pH-range acids and bases that contain abrasive material - filter press; corrosive sludges
xxx 311 Stainless Steel:PTFE:PTFEWide pH-range acids, bases and neutral fluids that contain solids
xxx 525 Hytrel:Acetal:HytrelGeneral purpose - water; oil; windshield wash fluids
xxx GGG Geolast:Geolast:GeolastNeutral pH-range fluids that contain abrasive material - petroleum products; ground water applications
xxx 366 Stainless Steel:Santoprene:SantopreneMedium pH-range acids, bases and neutral fluids that contain abrasive material - soaps; cleaning chemicals; filter press
xxx 955 Polypropylene:Hytrel:HytrelLow cost and good flex-life - Water and other neutral non-solvent fluids;water-based coatings; adhesives
xxx 911 Polypropylene:PTFE:PTFEFull pH-range acids, bases and neutral fluids that do not contain abrasive material - sulfuric and nitric acids
xxx 388 Stainless Steel:Fluoroelastomer:FluoroelastomerUnleaded gasoline and plating chemicals
xxx A88 Kynar:Fluoroelastomer:FluoroelastomerGood choice with plating chemicals, abrasive materials and suction-lift applications; Kynar seat is the appropriate alternative when Fluoroelastomer seat is not available
xxx A11 Kynar:PTFE:PTFEHigh-concentration of high-temperature acids and bases; abrasive acidic or caustic material
9
Pump Configurations
Description Part No.
Air Control Assembly(includes filter, lubricator, regulator, gauge, mounting bracket and fittings)
1/4 in. (6.35 mm) air inlet (fits 307 and 716) 110149
1/2 in. (12.7 mm) air inlet (fits 1040, 1590, 2150) 217072
3/4 in. (19.05 mm) air inlet (fits 3275) 217073
Air Filters (centrifugal action and 40 micron filter)
1/4 npt(fbe) 110146
1/2 npt(fbe) 106149
3/4 npt(fbe) 106150
Air Regulators
1/4 npt(fbe) 110318
1/2 npt(fbe) 104266
3/4 npt(fbe) 207755
Companion Flange Kits (includes PTFE gaskets and fasteners)
1 in. (25.4 mm) Polypropylene for 1040 (1 in. ANSI with 1 npt(f)) 239005
1 in. (25.4 mm) SST for 1040 (use with 1040 acetal pumps also) 239008
1 in. (25.4 mm) Kynar for 1040 (1 in. ANSI with 1 npt(f)) 239009
1-1/2 in. (38.1 mm) Polypropylene for 1590 (1-1/2 in. ANSI with 1-1/2 npt(f)) 239006
1-1/2 in. (38.1 mm) Kynar for 1590 (1-1/2 in. ANSI with 1-1/2 npt(f)) 239010
2 in. (50.8 mm) Polypropylene for 2150 (2 in. ANSI with 2 npt(f)) 239007
2 in. (50.8 mm) Kynar for 2150 (2 in. ANSI with 2 npt(f)) 239011
Service Kits for Husky Air Valves
For 205 238853
For 307 239952
For 515 and 716 241657
For 1040 thru 2150 236273
For 3275 238765
Ordering Information
10
Accessories
Notes
11
Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco productsmove, measure, control, dispense and apply a wide range of fluids and viscous materials usedin vehicle lubrication, commercial and industrial settings.
The company’s success is based on its unwavering commitment to technical excellence, world-class manufacturing and unparalleled customer service. Working closely with qualified distributors, Graco offers systems, products and technology that set the quality standard in a wide range of fluid handlingsolutions. Graco provides equipment for spray finishing, protective coating, paint circulation, lubrication,and dispensing sealants and adhesives, along with power application equipment for the contractor industry. Graco’s ongoing investment in fluid management and control will continue to provideinnovative solutions to a diverse global market.
ABOUT GRACO
©2001 Graco Inc. 300570E Rev. B 06/08 Printed in Europe. All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
Europe+32 89 770 700
FAX +32 89 770 777WWW.GRACO.BE
Graco is certified ISO 9001.
All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.
CONTACTMAILING ADDRESSP.O. Box 1441Minneapolis, MN 55440-1441Tel: 612.623.6000Fax: 612.623.6777
ASIA PACIFICJAPANGraco K.K.1-27-12 HayabuchiTsuzuki-kuYokohama City, Japan 2240025Tel: 81.45.593.7300Fax: 81.45.593.7301
AMERICASMINNESOTAWorldwide HeadquartersGraco Inc.88-11th Avenue N.E.Minneapolis, MN 55413
ASIA PACIFICCHINAGraco Hong Kong Ltd.Representative OfficeRoom 118 1st FloorNo.2 Xin Yuan BuildingNo.509 Cao Bao RoadShanghai, P.R. China 200233Tel: 86.21.649.50088Fax: 86.21.649.50077
ASIA PACIFICKOREAGraco Korea Inc.Choheung Bank Building4th Floor #1599Gwanyang-Dong, Dongan-Ku,Anyang-Si, Gyunggi-Do,Korea 431-060Tel: 82(Korea).31.476.9400Fax: 82(Korea).31.476.9801
GRACO LOCATIONS
EUROPEBELGIUMEuropean HeadquartersGraco N.V.Industrieterrein-Oude BundersSlakweidestraat 313630 Maasmechelen, BelgiumTel: 32.89.770.700Fax: 32.89.770.777