Writing a Business PlanTim C. [email protected]
With major contributions from: Internet sources, McKinsey & Venture Cup
Unless otherwise stated, this material is under a Creative Commons 3.0 Attribution–Share-Alike licence and can be freely modified, used and redistributed but only under the same licence and if including the following statement:
“Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark”
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
2
Today’s agenda
• How to identify a business idea – concept and presentation
• Developing the business plan
1. Executive summary
2. Product/service concept
3. Marketing strategy
4. Business model/system
5. Business case and risks
6. Implementation plan & Checklists
• Video case exercise
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
3
Description of the business system/value chain
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
4
Example of business model
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
5
Today’s agenda
• How to identify a business idea – concept and presentation
• Developing the business plan
1. Executive summary
2. Product/service concept
3. Marketing strategy
4. Business model/system
5. Business case and risks
6. Implementation plan & Checklists
• Video case exercise
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
6
Profit & Loss statement (P&L) is the backbone of the business case
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
7
Five years projection of Profit and Loss statement
*
* Earnings Before Interest and Tax[McKinsey]
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
8
Example revenue model – Internet based business
[McKinsey]
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
9
Example cost model – Internet based business
[McKinsey]
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
10
Summary of revenue and EBIT
[McKinsey]
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
11
Description of cases
[McKinsey]
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
12
Case comparison of Revenue and EBIT in 2013
[McKinsey]
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
13
Today’s agenda
• How to identify a business idea – concept and presentation
• Developing the business plan
1. Executive summary
2. Product/service concept
3. Marketing strategy
4. Business model/system
5. Business case and risks
6. Implementation plan & Checklists
• Video case exercise
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
14
Implementation action plan and timeline, 20xx
[McKinsey]
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
15
Checklist: Executive summary
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
16
Checklist: Product/service concept – Description
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
17
Checklist: Product/service concept – Value proposition
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
18
Checklist: Target Market
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
19
Checklist: Competition
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
20
Checklist: Marketing strategy
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
21
Checklist: Business model
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
22
Checklist: Revenue projection
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
23
Checklist: Costs projection
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
24
Checklist: Business case
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
25
Checklist: Implementation plan
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
26
Today’s agenda
• How to identify a business idea – concept and presentation
• Developing the business plan
1. Executive summary
2. Product/service concept
3. Marketing strategy
4. Business model/system
5. Business case and risks
6. Implementation plan & Checklists
• Video case exercise
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
27
Case example – sketch the business plan for the following video case…
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
28
More help, regarding the core business
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
29
… and the way it ended
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
30
Summary: Did we achieve the objectives?
• What are the elements of a promising business idea• How to make your business idea irresistible• What to keep in mind when presenting your business in a plan• How to analyse your market and the competition• How to choose your target market• How to determine your market strategy• What a business system is, and what to look out for when
designing one• What to include in your financial planning• How to consider and represent risks
2012Original material by Tim C. McAloone for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
31
Questions
?