Sumitomo
DataCom
Carrier Hotelnetworks
EntErpriSE
4th Level network solutionsOptical Fiber inFrastructure Guide
Data Center
th
Take Your Network To The Highest
Lev
el
TM
Carrier Hotel
enterprise
data center
take Your network to the Highest Level
4th Level Data Center and Enterprise Network Solutions simplify the complex
by offering you the latest and most advanced optical fiber technologies in a fully
integrated, end-to-end system — enabling unprecedented flexible, affordable,
real-time and on-site infrastructure design.
From the most reliable high-speed transmission cables to breakthrough connectivity
solutions to the smallest yet most advanced precision tools, each 4th Level product
is designed for the speed, immediate scalability, space savings, and ultra high
performance demanded by high density and zero-downtime networks.
Experience the freedom and control of customized, on-site connectivity and exact
length cable builds with 4th Level’s revolutionary Lynx2 Splice-On Connectors that
eliminate the shorts, excess slack, and logistic delays of factory pre-terminated
cable assemblies — resulting in real-time scalability for fast and easy moves, adds,
and changes (MACs), immediate repairs and restoration to keep your network up
and running.
As a major leader in the manufacturing and innovation of the highest quality
optical fiber and connectivity solutions, Sumitomo Electric Lightwave was the
first to introduce the patented, breakthrough technology of the MPO Splice-On
Connector. Its industry recognized patented hand-peelable ribbon cable,
in conjunction with the Lynx2 MPO, is revolutionizing on-site connectivity, speed,
and lower network project costs for the fast and easy migration of the network
to 40G and 100 Gb/s and beyond.
With dedication to continuous innovation and the industry’s highest commitment
to customer service, we ensure that our customers have the latest and most
advanced solutions vital for the success of their network…today and tomorrow.
thTake Your Network To The Highest
Lev
el
TM
3For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com
Corporate
Sumitomo Electric Lightwave
Established in 1984, Sumitomo Electric Lightwave, located in Research Triangle Park, NC is a Sumitomo Electric Group company. With over 200,000 employees and approximately 20 billion dollars in revenue, Sumitomo Electric has become one of the world’s leading edge forces in the R&D and manufacturing of fiber optic cables and related products, connectivity solutions, optical network products, FTTx solutions, and PON technology for the advancement of communications worldwide.
Sumitomo Electric Lightwave draws not only on its own outstanding resources and expertise, but also on the vast worldwide Sumitomo Electric consolidation to address the growing demand for new and better technology.
Driven by continuous innovation, Sumitomo Electric Lightwave has made its mark as the incumbent manufacturer and supplier to the world’s largest broadband and communications providers by offering the highest quality and most reliable fiber optic cable,the best in fusion splicing technology, precision engineered connectivity products… and first-to-market innovations that decrease deployment costs, while increasing productivity.
We bring that same dedication to excellence, quality, service, and innovation to the technology needs of data center and enterprise networks with end-to-end optical fiber solutions engineered to meet your highest expectations in reliability and performance.
CustomerWhen purchasing the right solutions for your
network applications, you can rest assured
that our products do what we say they’ll do.
at sumitomo electric lightwave, isO 9001,
telcordia compliance, and tl-9000 are just
the beginning of the high standards to which
our products must adhere. the promise to exceed
our customers’ expectations of product excellence
has been ingrained as a tradition within the
sumitomo corporate culture and manufacturing
process for over 100 years — ensuring our future
stability and success…and that of our customers.
Commitment
For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com4
CustomerContacts
Contact us today for more information about Sumitomo’s full line of solutions or to request a FutureFLEX® Air-blown Fiber® catalog and CD.
FutureFleX® air-blown Fiber®
Visit www.futureflex.com
the World’s Most advanced infrastructure for the enterprise network
The World’s Most Advanced Infrastructure for the Enterpris
e Netw
ok
F U T U R E FLEX Air-blown FiberThe World’s Most Advanced Infrastructure
for the Enterprise Netwok
Dedicated to offering the best service in the industry, our outstanding technical support and customer service personnel look forward to assisting you.
Ordering Assistance: 4th Level Data Center Solutions (including
Lynx2 CustomFit® Splice-On Connectors)
or Fusion Splicing Equipment:
Please contact Customer Service.
Toll Free Assistance: 800-358-7378
Email: [email protected]
Website: www.sumitomoelectric.com
Technical Questions:4th Level Data Center Solutions (including
Lynx2 CustomFit® Splice-On Connectors)
or Fusion Splicing Equipment:
Please call 855-412-9838. Our Technical and
Engineering Staff is Ready to Assist You.
Fusion Splicing Maintenance and Repair Assistance:
Contact our On-TIME Fusion Technical
Center at 888-Splicer
Information for FutureFLEX® Air-blown Fiber®
Toll Free Assistance: 877-356-FLEX
Email: [email protected]
Website: www.futureflex.com
5For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com
table of Contents
Contents
Distribution & Interconnect Cables
Optical Pluggable Transceivers
Lynx2 CustomFit® Splice-On Connectors
Direct Attach Cables & Electric Wire Solutions
Patch Cords Panels & Cassettes
4th Level DataCenter solutions
Optical Fiber Cables................................................................................. Pages 6-11
Cable Assemblies..................................................................................... Pages 12-13
Interconnect Hardware Patch Panels and Cassettes............................... Pages 14-15
Cable and Interconnect Hardware Ordering Guides................................ Pages 16-17
Lynx2-PLUS CustomFit® Splice-On Connectors (SC,LC, FC, ST).......... Pages 18-21
Lynx2-MPO CustomFit® Splice-On Connectors....................................... Pages 22-23
Quantum Fusion Splicers™....................................................................... Pages 24-27
Precision Cleavers................................................................................... Page 28
Fusion Splicer and Connector Cleaners…............................................... Page 29
Quick SC & LC Mechanical Connectors…............................................... Page 30
Licensed Certification, Training, and Warranty Information…................... Page 31
For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com6
Data Center/ Indoor Cables12-144, 250μm Fibers
description
Sumitomo Electric Lightwave’s 4th Level fiber optic cables use 250μm color-coded optical fibers and a dielectric strength member with a flexible, flame retardant outer jacket. These cables are ideal for networking and data center applications, as well as for creating multi-fiber assemblies on-site. The twelve fiber groupings enable connectorization with both MPO and all industry standard connectors. The non-preferential bend
Features
• Color-coded Optical Fibers for Quick and Easy Identification
• 12-Fiber Groupings for Ease and Compatibility with Multi-fiber Connectors
• All Dielectric Cable Construction Requires No Grounding or Bonding
4th Level Cables 12 and 24-Fiber
4th Level Cables 48 and 72-Fiber
Cablesoptical Fiber
• Plenum Rated Jacket for Use Anywhere in the Data Center
• Riser Rated /Armored Versions Available
• RoHS Compliant
axis allows for easy installation in space constrained areas and the all dielectric cable construction requires no grounding or bonding. Cables are available with 62.5μm, 50μm multimode and single-mode fibers, including Gigabit Ethernet and 10 Gigabit Ethernet performance varieties. 4th Level plenum and riser cables meet the application requirements of the NEC® Article 770 and are OFNP/FT-6 or OFNR/ FT-4 listed, respectively.
plenum specifications Fiber count nominal Outside
diameternominal dimensions
nominal cable Weight
Maximum tensile loads Minimum bend radius
Oval – mm (in) Kg / km Short-Term Long-Term Loaded Installed – cm (in)
mm (in) (lb / 1000ft) N (lbf) N (lbf) Cm (in) Single-Mode Multimode
12 3.0 (0.12) – 8.3 (5.6) 440 (100) 132 (30) 4.5 (1.8) 3.0 (1.2) 1.5 (0.6)
24 – 7.0 x 4.0 (0.28 x 0.16) 31.1 (20.9) 660 (150) 200 (45) 10.5 (4.1) 8.0 (4.1) 4.0 (1.6)
36 9.0 (0.35) 70.1 (47.1) 660 (150) 200 (45) 13.5 (5.3) 9.0 (3.5) 9.0 (3.5)
48 9.8 (0.39) – 90.9 (61.1) 660 (150) 200 (45) 14.7 (5.8) 9.8 (3.9) 9.8 (3.9)
72 11.2 (0.44) – 122.4 82.2) 660 (150) 200 (45) 16.8 (6.6) 11.2 (4.4) 11.2 (4.4)
96 14.2 (0.56) 190.3 (127.9) 660 (150) 200 (45) 21.3 (8.4) 14.2 (5.6) 14.2 (5.6)
144 15.8 (0.62) – 214.7 (144.3) 660 (150) 200 (45) 23.7 (9.3) 15.8 (6.2) 15.8 (6.2)
plenum characteristics temperatures Storage: -40° to 70° C (-40° to 158° F)
Installation: 0° to 60° C (32° to 140° F)
Operation: 0° to 70° C (32° to 158° F)
approvals and listings National Electric Code® (NEC®) OFNP, CSA FT-6, ICEA S-83-596
Flame resistance NFPA 262 (for Plenum, Riser and General Building Applications)
7For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com
Data Center/ Indoor Cables6-144, 900μm Fibers
description
Sumitomo Electric Lightwave’s 4th Level fiber optic cables are designed for use in plenum, riser and general purpose environments for intra-building backbone and horizontal installations. These multi-fiber cables use 900μm tight buffered fibers to facilitate field termination. In each design, dielectric strength members add strength to the cables while protecting the fibers at the same time. Outer jackets, available in industry standard color codes, are made of flame retardant materials that allow the cables to pass industry required flame tests.
Features
• 900μm Tight Buffered Fibers for Easy and Quick Stripping
• 6 and 12-Fiber Groupings for Quick and Easy Identification
• All Dielectric Cable Construction That Requires no Grounding or Bonding
4th Level Cables 48 and 72-Fiber
Due to all dielectric designs, No grounding or bonding is required. The cables are an ideal choice for routing inside buildings. Plenum and riser rated designs are available and, based on the installation environment, can be easily installed in a data center or LAN application.
4th Level plenum and riser cables meet the application requirements of the NEC® Article 770 and are OFNP/FT-6 or OFNR/FT-4 listed, respectively.
• Plenum Rated Jacket for Use Anywhere in the Data Center
• Riser Rated/Armored Versions Available
• RoHS Compliant
plenum specifications Fiber count nominal Outside
diameternominal cable Weight
Maximum tensile loads Minimum bend radius
Kg/km Short-Term Long-Term Loaded Installed
mm (in) (lb/1000ft) N (lbf) N (lbf) cm (in) cm (in)
6 5.3 (0.21) 27 (19.0) 440 (100) 132 (30) 8.0 (3.2) 2.7 (1.1)
12 6.1 (0.24) 37 (26.0) 440 (100) 132 (30) 9.2 (3.6) 3.1 (1.2)
24* 7.8 (0.31) 64 (45.0) 660 (150) 200 (45) 11.7 (4.6) 7.8 (3.1)
48 17.8 (0.69) 314 (211) 660 (150) 200 (45) 26.7 (10.5) 17.8 (6.9)
60 17.9 (0.70) 278 (187) 660 (150) 200 (45) 26.9 (10.6) 17.9 (7.0)
72 18.6 (0.73) 330 (221) 660 (150) 200 (45) 27.9 (11.0) 18.6 (7.3)
96 22.2 (0.87) 479 (321) 660 (150) 200 (45) 33.3 (13.1) 22.2 (8.7)
144 23.7 (0.92) 489 (328) 660 (150) 200 (45) 35.6 (14.0) 23.7 (9.2)
plenum characteristics temperatures Storage: -40° to 70° C (-40° to 158° F)
Installation: 0° to 60° C (32° to 140° F)
Operation: 0° to 70° C (32° to 158° F)
approvals and listings National Electric Code® (NEC®) OFNP, CSA FT-6, ICEA S-83-596
Flame resistance NFPA 262 (for Plenum, Riser and General Building Applications)
*24-Fiber Specification for Dual Layer Design; Other Design Configurations are Available.
For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com8
Flexible Indoor RiserRibbon Cables
description
Sumitomo Electric Lightwave’s 4th Level Flexible Indoor Riser Rated Ribbon cables feature a flame retardant outer jacket, 250μm color-coded optical fibers for easy fiber identification, and Sumitomo’s exclusive patented easy split and peel technology for easy fiber access and unprecedented ease of handling and splicing. The twelve fiber ribbon subunits enable easy connectorization with MPO splice-on connectors and ribbon pigtails. These cables are an excellent choice for intra-building connectivity applications
Features
• Dry Central Tube Design for Easy Installation; No Mess When Splicing
• Patented Peelable Ribbon Matrix Material For Easy Fiber Access
• 12 Fiber Ribbon Groupings For Ease and Compatibility with Multi-Fiber Connectors
for data center and other network application scenarios.
Flexible dielectric strength members provide mechanical durability within a flame retardant jacket and the non-preferential bend axis allows for easy installation in space-constrained areas. The all-dielectric cable construction requires no grounding or bonding. The Cables meets UL 1666 and CSA FT4 specifications and are available in all fiber types.
12-216 Fibers
riser specifications Fiber count nominal Outside
diameternominal cable Weight
Maximum tensile loads Minimum bend radius
mm (in) Kg/km (lb/1000ft) Short-Term Long-Term Loaded Installed – Cm (in)
N (lbf) N (lbf) Cm (in) Single-Mode Multimode
12 - 96 14.2 (0.56) 196 (132) 1334 (300) 445 (100) 28.4 (11.2) 14.2 (5.6) 14.2 (5.6)
144 16.0 (0.63) 230 (155) 1334 (300) 445 (100) 32.0 (12.6) 16.0 (6.3) 16.0 (6.3)
riser characteristics temperatures Storage: -40° to 70° C (-40° F to 158° F)
Installation: -10° to 60° C (14° F to 140° F)
Operation: -20° to 70° C (-4° F to 158° F)
approvals and listings National Electric Code® (NEC®) OFNR, CSA FT-4, ICEA S-83-596
Flame resistance UL 1666 (for riser and general building applications)
• Color-Coded Optical Fibers for Quick and Easy Identification
• All-Dielectric Cable Construction Requires No Grounding or Bonding
• RoHS Compliant
8 and 16 Fiber Ribbon Available to Support 40/100G Networks
Cablesoptical Fiber
9For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com
Flexible Indoor PlenumRibbon Cables
description
Sumitomo Electric Lightwave’s 4th Level Flexible Indoor Plenum Rated Ribbon Cables are designed for fiber density and the saving of valuable duct space, making them an ideal choice for intra-building applications. These cables feature 250μm color-coded optical fibers for easy fiber identification and Sumitomo’s exclusive patented easy split and peel technology for easy fiber access and unprecedented ease of handling and splicing. The twelve fiber ribbon groupings enable easy connectorization with both MPO and all industry standard connectors.
Features
• Dry Central Tube Design for Easy Installation; No Mess When Splicing
• Patented Peelable Ribbon Matrix Material For Easy Fiber Access
• 12 Fiber Ribbon Groupings For Ease and Compatibility with Multi-Fiber Connectors
Flexible dielectric strength members provide mechanical durability within a flame retardant jacket, while the non-preferential bend axis allows for easy installation in space-constrained areas. The all-dielectric cable construction eliminates the need for grounding or bonding. These plenum rated cables meet application requirements of the National Electric Code® (NEC®) OFNP, and are also CSA FT-6 listed. Sumitomo offers these cables in all fiber types.
12-216 Fibers
plenum specifications Fiber count nominal Outside
diameternominal cable Weight
Maximum tensile loads Minimum bend radius
mm (in) Kg/km (lb/1000ft) Short-Term Long-Term Loaded Installed – Cm (in)
N (lbf) N (lbf) Cm (in) Single-Mode Multimode
12 - 96 14.0 (0.55) 192 (129) 1334 (300) 445 (100) 28.0 (11.0) 14.0 (5.5) 14.0 (5.5)
108 - 216 16.6 (0.65) 257 (173) 1334 (300) 445 (100) 33.2 (13.4) 16.6 (6.5) 16.6 (6.5)
plenum characteristics temperatures Storage: -40° to 70° C (-40° F to 158° F)
Installation: 0° to 60° C (32° F to 140° F)
Operation: 0° to 70° C (32° F to 158° F)
approvals and listings National Electric Code® (NEC®) OFNP, CSA FT-6, ICEA S-83-596
Flame resistance NFPA 262 (for plenum riser and general building applications)
• All-Dielectric Cable Construction Requires no Grounding or Bonding
• Meets NEC® OFNP and CSA FT6 Specifications
• RoHS Compliant
8 and 16 Fiber Ribbon Available to Support 40/100G Networks
For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com10
Indoor/OutdoorRiser Ribbon Cables
description
Sumitomo Electric Lightwave’s 4th Level Indoor-Outdoor Riser Rated Ribbon Cables feature 250μm color-coded optical fibers for easy fiber identification and Sumitomo’s exclusive patented easy split and peel technology for easy fiber access and unprecedented ease of handling and splicing. The twelve fiber ribbons enable connectorization with both MPO and all industry standard connectors. The non-preferential bend axis allows for easy installation in space constrained areas.
Features
• Color-Coded Fibers for Quick and Easy Identification
• Patented Peelable Ribbon Matrix Material For Easy Fiber Access
• 12 Fiber Ribbon Groupings For Ease and Compatibility with Multi-Fiber Connectors
The cables include a dielectric strength member with a flexible, flame-retardant outer jacket in its all dielectric cable construction that eliminates grounding or bonding. Sumitomo’s Indoor-Outdoor Riser Rated Ribbon Cables also eliminate the need for installers to switch from an outside plant to a premise cable when transitioning from the outside plant to inside plant. The cables meet UL 1666/CSA FT4 specifications and are available in all fiber types.
12-144 Fibers
riser specifications Fiber count nominal Outside
diameternominal cable Weight
Maximum tensile loads Minimum bend radius
mm (in) Kg/km (lb/1000ft) Short-Term Long-Term Loaded Installed – Cm (in)
N (lbf) N (lbf) Cm (in) Single-Mode Multimode
12 - 48 15.5 (0.61) 220 (148) 2669 (600) 890 (200) 31 (12.2) 15.5 (6.1) 15.5 (6.1)
60 - 144 17.5 (0.69) 259 (174) 2669 (600) 890 (200) 35 (13.8) 17.5 (6.9) 17.5 (6.9)
riser characteristics temperatures Storage: -40° to 70° C (-40° F to 158° F)
Installation: -10° to 60° C (32° F to 140° F)
Operation: -40° to 70° C (-40° F to 158° F)
approvals and listings National Electric Code® (NEC®) OFNR, CSA FT-4, ICEA S-83-596
Flame resistance UL-1666 (for riser and general building applications)
• All-Dielectric Cable Construction Requires No Grounding or Bonding
• Meets UL 1666/CSA FT4 Specifications
• Sumitomo All Dry Cable Construction Contains No Messy Gels, Thereby Making the Installation Faster
• RoHS Compliant
8 and 16 Fiber Ribbon Available to Support 40/100G Networks
Cablesoptical Fiber
11For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com
Indoor ArmoredRibbon Cables
description
Sumitomo Electric Lightwave’s 4th Level Indoor Armored Ribbon Cables feature 250μm color-coded optical ribbon fiber, Sumitomo’s patented easy split and peel technology, and non-preferential bend axis. These optical fiber cable design features allow easy fiber identification, access, handling, and splicing for space constrained area installations. The twelve fiber ribbons enable connectorization with both MPO and all industry standard connectors.
Features
• Color-Coded Fibers for Quick and Easy Identification
• Patented Peelable Ribbon Matrix Material for Easy Fiber Access
• RoHS Compliant
The cables include a dielectric strength member with a flexible, flame-retardant outer jacket in its all dielectric cable construction that eliminates grounding or bonding. The cables include a dielectric strength member with a flexible, flame-retardant outer jacket in its all dielectric cable construction that eliminates grounding or bonding. The plenum cables meet National Electrical Code® (NEC Article 770), Underwriters
Laboratory (UL910), and are OFNP and CSA FT6 listed. These cables are available in all fiber types and other core designs.
plenum specifications Fiber count nominal Outside
diameternominal cable Weight
Maximum tensile loads Minimum bend radius
Kg / km Short-Term Long-Term Loaded Installed – Cm (in)
mm (in) (lb / 1000ft) N (lbf) N (lbf) Cm (in) Single-Mode Multimode
12 - 96 19.9 (0.78) 326 (219) 1320 (300) 400 (90) 299 (11.8) 199 (7.8) 199 (7.8)
plenum characteristics temperatures Storage: -40° to 70° C (-40° F to 158° F)
Installation: 0° to 60° C (32° F to 140° F)
Operation: 0° to 70° C (32° F to 158° F)
approvals and listings National Electric Code® (NEC®) OFNP, CSA FT-6, ICEA S-83-596
Flame resistance NFPA 262, UL-910 (for plenum, riser and general building applications)
• Available in Riser Rated Constructions (Meets UL1666/CSA FT 4)
• Meets UL 910 / CSA FT6 Specifications
• 12 Fiber Ribbon Groupings for Ease and Compatibility with Multi-Fiber Connectors
8 and 16 Fiber Ribbon Available to Support 40/100G Networks
For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com12
Data CenterEnterprise Network Cable Assemblies 1-432 Fibers
description
Sumitomo Electric Lightwave’s 4th Level cable assemblies are designed for use in any application requiring optical connections. Available in simplex, duplex, interconnect and trunk configurations, these assemblies can contain up to 432 optical fibers.
applications
• Data Centers
• MPO Cassettes
• High Density Distribution Panels
• Direct Connection to Equipment
• Connection Between Patch Panels
• Restricted Space Installations
• Central Office Cross Connects
Features
• Customizable Termination and Cable Options Available
• Can be Designed with the Following Fiber Types: SM; 62.5μmMM; 50μm (OM2) and 50μm Laser Optimized (OM3/OM4)
• Various Connector End Configurations (See Ordering Information Table Below)
specifications
• Riser (OFNR/FT-4) and Plenum (OFNP/FT.6)
• 100% Visual/Optical Performance Verification
• Exceeds TIA and Telcordia Requirements
• Insertion Loss and Back Reflection Performance that Meets or Exceeds Industry Standards
Distribution Trunk Cables
Duplex Patch Cords
Simplex Patch Cords
Jumper part numbering Guide
ca–1 2 2 2 3 4 5 6 7 8 9 9 9 1 0 X ( *SEE NOTE BELOW)
1Fiber type
3 cable cOre
desiGn
4 sHeatH
6 cable diaMeter
999 lenGtH
1 – OM1 62.5um 2 – OM2 50um 3 – OM3 50um 4 – OM4 50um 5 – SM (Low Water Peak) 6 – SM (NZDS) 8 – SM (Bend Insensitive) 9 – SM (Standard)
I – Interconnect Typical Application: Jumpers Diam.:1.6mm, 2mm, 3mm, Jacketed 12F Ribbon Fiber Count: 1F – 12F
W – Indoor Distribution Typical Application: Trunks, Harnesses Diam.:>3mm Fiber Count: 12F – 144F
R – Central Tube Typical Application: High Fiber Count Ribbon, Drop Cable, Indoor/Outdoor Diam.:>3mm Fiber Count: 12F – 432F
N – Standard Loose Tube Typical Application: OSP Cable Diam.:>3mm Fiber Count: 1F – 432F
P – Riser U – Plenum G – Indoor/Outdoor L – Interlocked Armor/Riser H – Interlocked Armor/Plenum 1 – Interlocked Indoor/Outdoor X – No Jacket
C – 1.6mm T – 2.0mm X – 3.0mm D – Other
001 – 999+
10 UNIT OF MEASURE
F – FEET M-METER
7 CONNECTOR #1
8 CONNECTOR #2
5 SUBUNITS
222 FIBER COUNT
X Non-Standard
L – LC A – LCAPC U – LC Uniboot R – LC Uniboot (Reverse Polarity) S – SC B – SC APC F – FC C – FC APC T – ST J – MTRJ(F) K – MTRJ(M) M – MPO(M) 12F Y – MPO(F) 12F N – MPO(F) 24F P – MPO(M) 24F D – MPO(M)RUGGED G – MPO(F)RUGGED X – BARE END
001 – 432 *0G8 = 8F 40G
CONFIG OUTER 8 MPO
POSITIONS ACTIVE
U – 250um Typ.>2F CNT
S – 900um Typ. 1F, 2F CNT
Z – Zipcord 2F CNT-900um
R – Ribbon
Exx – Exact Length (xx is Tolerance +/-in IN/CM) P1 – 1-Pulling Eye P2 – 2-Pulling Eyes R – Reel x7-y8 – Breakout Length (x and y are Breakout Length in FT/M, 7 and 8 Connectors)
*NOTE CA- CHANGES TO CB- FOR METHOD
B CABLE ASSEMBLIES ONLY
CablesAssemblies
13For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com
Jumper part numbering Guide
ca–1 2 2 2 3 4 5 6 7 8 9 9 9 1 0 X ( *SEE NOTE BELOW)
1Fiber type
3 cable cOre
desiGn
4 sHeatH
6 cable diaMeter
999 lenGtH
1 – OM1 62.5um 2 – OM2 50um 3 – OM3 50um 4 – OM4 50um 5 – SM (Low Water Peak) 6 – SM (NZDS) 8 – SM (Bend Insensitive) 9 – SM (Standard)
I – Interconnect Typical Application: Jumpers Diam.:1.6mm, 2mm, 3mm, Jacketed 12F Ribbon Fiber Count: 1F – 12F
W – Indoor Distribution Typical Application: Trunks, Harnesses Diam.:>3mm Fiber Count: 12F – 144F
R – Central Tube Typical Application: High Fiber Count Ribbon, Drop Cable, Indoor/Outdoor Diam.:>3mm Fiber Count: 12F – 432F
N – Standard Loose Tube Typical Application: OSP Cable Diam.:>3mm Fiber Count: 1F – 432F
P – Riser U – Plenum G – Indoor/Outdoor L – Interlocked Armor/Riser H – Interlocked Armor/Plenum 1 – Interlocked Indoor/Outdoor X – No Jacket
C – 1.6mm T – 2.0mm X – 3.0mm D – Other
001 – 999+
10 UNIT OF MEASURE
F – FEET M-METER
7 CONNECTOR #1
8 CONNECTOR #2
5 SUBUNITS
222 FIBER COUNT
X Non-Standard
L – LC A – LCAPC U – LC Uniboot R – LC Uniboot (Reverse Polarity) S – SC B – SC APC F – FC C – FC APC T – ST J – MTRJ(F) K – MTRJ(M) M – MPO(M) 12F Y – MPO(F) 12F N – MPO(F) 24F P – MPO(M) 24F D – MPO(M)RUGGED G – MPO(F)RUGGED X – BARE END
001 – 432 *0G8 = 8F 40G
CONFIG OUTER 8 MPO
POSITIONS ACTIVE
U – 250um Typ.>2F CNT
S – 900um Typ. 1F, 2F CNT
Z – Zipcord 2F CNT-900um
R – Ribbon
Exx – Exact Length (xx is Tolerance +/-in IN/CM) P1 – 1-Pulling Eye P2 – 2-Pulling Eyes R – Reel x7-y8 – Breakout Length (x and y are Breakout Length in FT/M, 7 and 8 Connectors)
*NOTE CA- CHANGES TO CB- FOR METHOD
B CABLE ASSEMBLIES ONLY
Duplex LC Uniboot Fiber Assembly
description
Sumitomo Electric Lightwave’s Duplex LC Uniboot Fiber Assemblies are specifically designed for high density applications. Unlike standard duplex connectors, these connectors house two ferrules under one housing. The housing can be easily removed using a dual purpose tool and the ferrules can then be rotated, changing the polarity of the assembly. Once the rotation is complete, the housing simply snaps back into place. The uniboot assembly is ideal for data centers where initial polarity requirements are unknown, since the assembly can be utilized in the opposite polarity from which is was originally intended.
Features
• Reverse Polarity Capability
• Easy Release Latch Design
• Ideal for High Density Applications
• Cable is Half the Size of Standard Zipcord, Saving Valuable Space
• Available in SMF and MMF
Additionally, the cable employed in these assemblies are smaller in diameter than an equivalent duplex zipcord assembly, thereby saving valuable space and improving airflow on the front side of a patch panel.
The release latch design makes the connector easy to remove from congested bulk heads by using a simple “push/pull” method. The tool used in removing the boot also serves as an extraction tool, allowing for quick and easy removal of an installed connector from a populated patch panel.
• Riser and Plenum
• 100% Visual/Optical Performance Verification
• TIA/EIA-568B-B.3 Compliant
• RoHS Compliant
Uniboot Housing and Extraction Tool
specifications sMF MMF
Insertion Loss 0.15dB (Avg) 0.35dB (Max) 0.10dB (Avg) 0.25dB (Max)
Insertion Loss 0.15dB (Avg) 0.35dB (Max) 0.10dB (Avg) 0.25dB (Max)
LC-LC Uniboot Duplex Fiber Assembly
tool Ordering Guide part number description
UHET-01 Uniboot Housing and Extraction Tool
For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com14
description
Sumitomo Electric Lightwave’s 4th Level PrecisionFlex™ 1RU, 2RU, 3RU, and 4RU patch panels are the industry’s first and only LGX and HD panels in one. These panels can be configured for various module footprints including LGX and HD, an option for both in the same panel, and other customized configurations. The 2RU can be configured with up to 288 LC connectors. By simply interchanging faceplates and standard cassette products/interconnect panels, installers and network technicians can now experience increased flexibility, versatility in their network design, and hardware cost savings.
The ideal choice for data center, storage area network (SAN), local area network (LAN), and central office / headend
4th Level PrecisionFlex™ Fiber Optic Patch Panels applications, 4th Level panels facilitate
easy installation, fiber access, and maintenance for years of worry free service. Mounting brackets allow for forward and backward adjustment within a standard 19” rely rack. These panels also feature a rugged construction with a user friendly design for no hassle installations.
What differentiates 4th Level’s end-to-end and integrated optical fiber solutions is the enablement of flexible, Real-Time, On-Site infrastructure design and the advanced optical fiber and connectivity solutions that leverage your existing network’s physical layer infrastructure with immediate scalability — and with superior quality solutions that are backed by unprecedented service and support.
2RU Fiber Optic Patch Panel – 288 Fiber Connections
Features
• Industry’s First & Only LGX and HD Panels in One
• Significant Hardware Cost Savings
• Flexibility with Interchangeable Face Plates, Enabling Various Cassette Formats as Required by Your Particular Network Design
• Rugged Construction of Heavy Gauge Powder Coated Aluminum for Extended Life Time and High-End Appearance
• Slide and Tilt Tray for Cassette Access or Slide Tray for Complete Removal
• Innovative Tray Stop Design that Prevents Unplanned Tray Egress from the Patch Panel
• Accepts Industry Standard Interconnect Panels
• High Density Capacity Allowing for Up to 288F Terminations in a 2RU Unit
• RoHS Compliant
Shelf Tray Tilts for Easy Cable Management Access
Ordering information — rack Mount patch panel shelves
part number rack units
cassette/interconnect positions
Maximum lc Fiber ports
Maximum sc Fiber ports
Maximum MpO ports
Ft01l03 1 3-LGX 72 36 N/A
Ft01H08 1 8-High Density 96 48 N/A
Ft01M24 1 24-MPO Couplers N/A N/A 24
Ft02l06 2 6-LGX 144 72 N/A
Ft02H24 2 24-High Density 288 144 N/A
Ft03l09 3 9-LGX 216 108 N/A
Ft03H36 3 36-High Density 432 216 N/A
Ft04l12 4 12-LGX 288 144 N/A
Ft04H48 4 48-High Density 576 288 N/A
characteristics
Options 1RU, 2RU, 3RU, and 4RU Options
construction Aluminum and Powder Coated for Durable Finish
Mounting Standard 19” Relay Rack Mounting Brackets that Adjust Forward & Back
doors Removable Front & Rear Doors
tray Slide Out and Tilt Tray from the Front; Tray Removable from the Front and Rear
interconnectHardware
15For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com
4th Level Cassettes/Interconnect Panels
description
Sumitomo Electric Lightwave’s 4th Level DataCenter Solutions provide the most advanced optical fiber connectivity products that leverage your existing network’s physical layer infrastructure ,while quickly and easily allowing you to support your data center network needs today and for the future.
In conjunction with our PrecisionFlex™ rack-mount patch panels, these compact cassettes allow for maximum density while reducing installation time by up to 75%.
The 4th Level LGX cassette modules support both 12-fiber or 24-fiber MPO trunk to LC or SC connectors. All cassettes are available with OM3/OM4 laser optimized fiber, OM1/OM2 multimode, or single-mode fiber as required by the network application.
Conversion cassettes designed to enable a quick and easy transition from existing 12-fiber infrastructure to 40G/100G 8 fiber capability are also available. 4th Level interconnect panels work seamlessly with the legacy LGX footprint configuration when cross connectivity is required. All cassettes are RoHS compliant. see the ordering table on page 17.
High density cassettes
• Requires only 50% of the Rack Space of a Standard Fiber Installation
• Compact Size and Built-In Latching System Modular Design Can Be Expanded as Needed
• No Special Tools or Expertise Required
• Insertion Loss Throughput:<0.75dB
conversion cassettes
• 12F/24F MPO to 8F MPO for Conversion From Existing infrastructure to 40G/100G
• 12F/24F to 8F Conversion Utilizes 100% of 12F/24F Based Infrastructure
• LGX, High Density and Available in Multiple Fiber Shelf Footprints
• Rack Mount Version Available
lGX cassettes
• 12F/24F MPO in Rear to LC or SC
• Compliant with Standard LGX Footprint
• No Special Tools or Expertise Required
• All Standard Connector Types Available
Ordering information — interconnect panels
part number connector Form Factor
connector ports
color
Ftlcp6d9 LC 12 Beige
Ftlcp6d7 LC 12 Aqua
Ftlcp6da LC 12 Green
Ftlcp6db LC 12 Blue
Ftlcp6Q9 LC 24 Beige
Ftlcp6Q7 LC 24 Aqua
Ftlcp6Qa LC 24 Green
Ftlcp6Qb LC 24 Blue
Ftscp3d9 SC 6 Beige
Ordering information (continued)
part number connector Form Factor
connector ports
color
Ftscp3d7 SC 6 Aqua
Ftscp3da SC 6 Green
Ftscp3db SC 6 Blue
Ftscp6d9 SC 12 Beige
Ftscp6d7 SC 12 Aqua
Ftscp6da SC 12 Green
Ftscp6db SC 12 Blue
FtMpp6sX MPO 6 Black
Ftu-blnK BLANK 0 Black
For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com16
cable product number Ordering Guide
Create a part number using this character set and codes:
s e – 1 2 3 4 5 5 5 - 6 - X1
Fiber type 1 50µm MM Fiber
2 62.5µm MM Fiber
4 Non-Zero Dispersion Shifted SM Fiber 8 Bend-Insensitive (657.Ax SM Fiber)
5 Standard SM fiber 652.D H Hybrid
2cable cOre desiGn
D DriTube® with Optical Fiber Ribbons
E DriTube with Modular Fiber Ribbons R Central Tube Ribbon (RRJK, FRJK, PRJK, and IROC)
I Interconnect U DriCore® Armorlux Extra (No Center Member)
L Central Tube with Fiber Bundles V PureDri™ Loose Tube/Dielectric Center Member (Denotes Loose Tube Based Cable)
N Loose Tube/Dielectric Center Member W Indoor Distribution
O DriCore® Loose Tube /Metallic Center Member X PureDri™ Armorlux Extra (No Center Member)
3sHeatH
A Single Armor – Dual PE Jacket (Loose Tube Cables) L Interlocked Armor/Riser Rated
C Custom Jacket follow with 3 Character Identifier N FRPE Sheath
D ADS/All-Dielectric with FRP Rods (PureRibbon® Cables Only) P Riser Rated Sheath (600lb)
E Single Armor – Single PE Jacket Q Single Armor, Single PE Jacket (300lb Armored Drop)
F Steam/Corrosion Resistant Copper Welded Sheath U Plenum Rated Sheath
G Indoor/Outdoor Riser Rated Sheath X Flexible Riser Rated Sheath (300lb)
H Interlocked Armor/Plenum Rated Sheath Y Indoor/Outdoor Plenum Rated Sheath
K Polyethylene Sheath (Loose Tube Cables Only) 1 Indoor/Outdoor Interlocked Armor Riser
2 Indoor/Outdoor Interlocked Armor Plenum
4subunits
A Sub-Units w/12 - 900µm Fiber S Individual 900µm Fiber
B Sub-Units w/12 - 250µm Fiber V Subunits w/6 - 900µm Fiber
J Reduced Diameter Subunits w/12 - 250µm Fiber Z Zipcord
X Other
5# OF Fibers
3 Digit Fiber Count
6Fiber attenuatiOn/
perFOrMance
A SM 0.35/0.25 dB/km (1310/1550nm) 7 OM3 Enhanced Performance 50µm MM (850/1300nm) 1Gb
B SM 0.40/0.30 dB/km (1310/1550nm) 8 OM4 Enhanced Performance 50µm (850/1300nm) 10Gb
D ITU G.652D SM 0.65/0.50 dB/km (1310/1550nm) 9 OM1 Enhanced Performance 62.5µm (850/1300nm) 1Gb
5 OM2 Standard 50um MM dB/km (850/1300nm)
X suFFiX A For 16F Ribbon T 2.0mm Cable or Subunit
C 1.6mm Cable or Subunit (X) Non-Standard Jacket Color (Letters Denote Color)
E For 8F Ribbon Y Dual Layer
F Flat (Flexible)
R Round Cable
Cableordering Guide
17For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com
cassette Ordering Guide HiGH density cassettes
part number rear ports rear port Fiber count Front ports Fiber type sleeve color
FTLC-MP12COM1 1 12 LC OM1 BEIGE
FTLC-MP12COM2 1 12 LC OM2 BEIGE
FTLC-MP12COM3 1 12 LC OM3 AQUA
FTLC-MP12COM4 1 12 LC OM4 AQUA
FTLC-MP12COS1 1 12 LC OS1 BLUE
FTLC-MP12COS1-A 1 12 LC OS1 GREEN
FTSC-MP12COM3 1 12 SC OM3 AQUA
FTSC-MP12COS1 1 12 SC OS1 BLUE
lGX cassettes
part number rear ports rear port Fiber count Front ports Fiber type sleeve color
FTLC-MP12COM1-L 1 12 LC OM1 BEIGE
FTLC-MP12COM2-L 1 12 LC OM2 BEIGE
FTLC-MP12COM3-L 1 12 LC OM3 AQUA
FTLC-MP12COM4-L 1 12 LC OM4 AQUA
FTLC-MP12COS1-L 1 12 LC OS1 BLUE
FTLC-MP12COS1-LA 1 12 LC OS1 GREEN
FTLC-MP24COM3-L1 1 24 LC OM3 AQUA
FTLC-MP24COM3-L2 2 12 LC OM3 AQUA
FTLC-MP24COM3-L3 3 8 LC OM3 AQUA
FTSC-MP12COM3-L 1 12 SC OM3 AQUA
FTSC-MP12COS1-L 1 12 SC OS1 BLUE
lGX cOnversiOn cassettes
part number rear ports rear port Fiber count Front ports (8F) Fiber type total Fiber count
FTMP-MP2-3-OM3-LB 2 12 3 OM3 24
FTMP-MP2-3-OM4-LB 2 12 3 OM4 24
FTMP-MP1-3-OM3-LB 1 24 3 OM3 24
FTMP-MP1-3-OM4-LB 1 24 3 OM4 24
FTMP-MP4-6-OM3-LB 4 12 6 OM3 48
FTMP-MP4-6-OM4-LB 4 12 6 OM4 48
FTMP-MP2-6-OM3-LB 2 24 6 OM3 48
FTMP-MP2-6-OM4-LB 2 24 6 OM4 48
patch panel Ordering Guide racK MOunt patcH panel sHelves
part number rack units cassette/interconnect positions
Maximum lc Fiber ports
Maximum sc Fiber ports
Maximum MpO ports
FT01L03 1 3-LGX 72 36 N/A
FT01H08 1 8-High Density 96 48 N/A
FT01M24 1 24-MPO Couplers N/A N/A 24
FT02L06 2 6-LGX 144 72 N/A
FT02H24 2 24-High Density 288 144 N/A
FT03L09 3 9-LGX 216 108 N/A
FT03H36 3 36-High Density 432 216 N/A
FT04L12 4 12-LGX 288 144 N/A
FT04H48 4 48-High Density 576 288 N/A
Hardwareordering Guide
For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com18
Lynx2-PLUS CustomFit® Splice-On ConnectorsSingle Package(Patented)
description
Sumitomo Electric Lightwave continues its tradition of innovation and customer focused, market driven product advancements with the release of the Lynx2-PLUS. Maintaining all of the quality standards of the Lynx2, the Lynx2-PLUS incorporates an enhanced installation procedure and smaller overall completed connector design.
With the Lynx2-PLUS, termination time for 2 and 3 mm cord applications has been reduced by half for complete connectorization in approximately 2 minutes. The new connectors no longer require furcation tubing for 2 and 3mm applications, resulting in shorter, more aesthetic connectors. The finished product mirrors factory pre-terminated jumpers, trunks, harnesses and/or arrays.
Features
• Improved Design for High Density Applications
• New 2 Minute Approximate Connectorization for 2 and 3mm Cord; (250 & 900μm in 96 seconds or less)
• Achieve EXACT Lengths On-Site, without the Risk of Shorts & Slack of Preterminated Cables
• Eliminates Logistic Delays of Pre-Engineered Cables/Jumpers
• Less Time, Material, and Labor Costs than Other Connectivity Methods
• Cross Compatible with all SC, LC, FC and ST Connectors
• Consistent & Reliable Results with Single-Mode and Multimode Fiber
• Low Insertion & Return Losses for Superior Signal Integrity
• Compatible with Sumitomo Splicers and Other Brands
• Instant Splice Loss Feedback
• Meets Telcordia GR-326-CORE and GR-1081-CORE Compliance
Like the Lynx2-MPO, customized, On-Site, Real-Time field terminations and cable builds at exact lengths are now made possible, enabling quick, easy, and reliable customized permanent field terminations without the shorts, excess slack, and logistic delays of pre-terminated cables.
Compatible with all SC, LC, FC and ST style fiber optic connectors, Lynx2-PLUS offers revolutionary Real-Time, On-Site flexibility for quick MACs, repairs, and restorations for minimal downtime, while eliminating crimping tools, gels, splice trays, and the inventory of varying length of pre-terminated jumpers — providing the industry’s most cost effective, reliable, and advanced choice in fiber termination.
connector type sc lc Fc st
Fiber SM, MM (62.5µm, 50µm, 50µm 10GIG)
Media type 250µm, 900µm, 2mm, 3mm
polish APC, UPC, PC
insertion loss SMF: 0.15dB (average), 0.3dB (maximum) MMF: 0.10dB (average), 0.25dB (maximum)
return loss SMF: >65dB(APC), >55dB(UPC) MMF: >30dB (PC)
Operating temp. -40ºCfg75ºC
Housing color SMF MMF
UPC APC PC 62.5µm PC 50µm PC 50µm 10GIG
Blue Green Beige Black Aqua
specifications
Connectorssplice-on
19For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com
Limited Supply
e X a M p l e s
S M Single-mode
LYNX2 - L C P C M 5 1 0 G - 2 . 0 Part Number is: LYNX2–LCPCM510G-2.0
LYNX2 - S C U P c S M - 2 5 0 9 0 0Part Number is: LYNX2–SCUPCSM-250900
M 6 Multimode 62.5µm (Beige Housing)
M 5 Multimode 50µm (Black Housing)
M 5 1 0 GMultimode 50µm Laser Optimized (Aqua Housing) OM3 & OM4 Compatible
P C Physical Contact <-30dB - Multimode
LYNX2 - A A(AA = Connector Style)
D D D d d d(DDDddd = Media Diameter)
A P c Angled Polished <-65dB - Single-mode (Green Housing)
U P c Ultra Polished <-55dB - Single-mode (Blue Housing)
L C
S C
F C
S T
B B b(BBb = Endface Polish)
C C c c c(CCccc = Fiber Type)
0.5’’
8’’
2.0mm
3.0mm
8.0mm
3.0mm
6.25mm
2 5 0 9 0 0 For 250µm or 900µm Tight Buffer
2 5 0 F t 8 For 250µm with 8” Furcation Tube
9 0 0 l t For 900µm Loose Buffer ABF Breakout Kit Compatible
2 . 0 For 2.0mm Cord
3 . 0 For 3.0mm Cord
3 . 0 d c lOnly for LC Duplex Application with 3.0mm Cord
lynX2-plus part numbering Guide (single package)
(Not Available in APC)
tool Kits and accessory Ordering Guide part number description Media type
250µm 2mm
900µm 3mm
LYNX2-TKU-2.0-3.0 Lynx2 Tool Kit for 2.0/3.0mm a a
LYNX2-ATK-SFC Assembly Platform for Lynx2 Cord Solution a
LYNX2-CORDTOOL-2.0-3.0 Cord Prep Tool for 2.0/3.0mm a
LYNX2-HOLDER-C Plastic Ferrule Holder (Sumitomo & New Competitor Splicers) a a
LYNX2-UML-C Lynx2, Ferrule Side Holder, Metal/Universal a a
LYNX2-UML-S Lynx2, Splice Sleeve Side Holder, Metal/Universal a a
FHS-025-LB5 Fiber Holder, Loose Buffer 250/900µm, 900LT a a
LYNX-SHEARS Kevlar Cutters a
JR-M03 Jacket Remover a a
LYNX2-ST-AT-01 ST Assembly Tool a a
LYNX2-DUPLEX CLIP-LC Duplex Clip for LC a a
LYNX2-DUPLEX CLIP-SC Duplex Clip for SC a a
For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com20
Lynx2-PLUS CustomFit ® Splice-On Connectors4ct. Productivity Package(Patented)
description
Sumitomo Electric Lightwave continues its tradition of innovation and customer focused, market driven product advancements with the release of the Lynx2-PLUS. Maintaining all of the quality standards of the Lynx2, the Lynx2-PLUS incorporates an enhanced installation procedure, smaller overall completed connector design, and improved packaging.
With the Lynx2-PLUS, termination time for 2 and 3 mm cord applications has been reduced by half for complete connectorization in approximately 2 minutes. The new connectors no longer require furcation tubing for 2 and 3mm applications, resulting in shorter, more aesthetic connectors. The finished product mirrors factory pre-terminated jumpers, trunks, harnesses and/or arrays.
Features
• Improved Design for High Density Applications
• New 2 Minute Approximate Connectorization for 2 and 3mm Cord; (250 & 900μm in 96 seconds or less)
• Achieve EXACT Lengths On-Site, without the Risk of Shorts & Slack of Preterminated Cables
• Eliminates Logistic Delays of Pre-Engineered Cables/Jumpers
• Less Time, Material, and Labor Costs than Other Connectivity Methods
• Cross Compatible with all SC, LC, FC and ST Connectors
• Consistent & Reliable Results with Single-Mode and Multimode Fiber
• Low Insertion & Return Losses for Superior Signal Integrity
• Compatible with Sumitomo Splicers and Other Brands
• Instant Splice Loss Feedback
• Meets Telcordia GR-326-CORE and GR-1081-CORE Compliance
The new 4ct. packaging improves efficiency with faster package entry, easier component access, and streamlined assembly process. Like the Lynx2-MPO, customized, On-Site, Real-Time field terminations and cable builds at exact lengths are now made possible, enabling quick, easy, and reliable customized permanent field terminations without the shorts, excess slack, and logistic delays of pre-terminated cables.
Compatible with all SC, LC, FC and ST style fiber optic connectors, Lynx2-PLUS offers revolutionary Real-Time, On-Site flexibility for quick MACs, repairs, and restorations for minimal downtime, while eliminating crimping tools, gels, splice trays, and the inventory of varying length of pre-terminated jumpers — providing the industry’s most cost effective, reliable, and advanced choice in fiber termination.
New!New!
specifications connector type sc lc Fc st
Fiber SM, MM (62.5µm, 50µm, 50µm 10GIG)
Media Type 250µm, 900µm, 2mm, 3mm
Polish APC, UPC, PC
Insertion Loss SMF: 0.15dB (average), 0.3dB (maximum) MMF: 0.10dB (average), 0.25dB (maximum)
Return Loss SMF: >65dB(APC), >55dB(UPC) MMF: >30dB (PC)
Operating Temp. -40ºC n 75ºC
Housing Color SMF MMF
SMF APC
Blue Green Beige Black Aqua
PC 62.5µm PC 50µm PC 50µm
Connectorssplice-on
21For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com
e X a M p l e s
S M Single-mode
LYNX2P4 - L C P C M 5 1 0 G - 2 . 0 Part Number is: LYNX2P4–LCPCM510G-2.0
LYNX2P4 - S C U P c S M - 2 5 0 9 0 0Part Number is: LYNX2P4–SCUPCSM-250900
M 6 Multimode 62.5μm (Beige Housing)
M 5 Multimode 50μm (Black Housing)
M 5 1 0 GMultimode 50μm Laser Optimized (Aqua Housing) OM3 & OM4 Compatible
P C Physical Contact <-40dB - Multimode
LYNX2P4 - A A(AA = Connector Style)
D D D d d d(DDDddd = Media Diameter)
A P c Angled Polished <-60dB - Single-mode (Green Housing)
U P c Ultra Polished <-50dB - Single-mode (Blue Housing)
L C
S C
F C
S T
B B b(BBb = Endface Polish)
C C c c c(CCccc = Fiber Type)
0.5’’
8’’
2.0mm
3.0mm
8.0mm
3.0mm
6.25mm
2 5 0 9 0 0 For 250μm or 900μm Tight Buffer
2 5 0 F t 8 For 250μm with 8” Furcation Tube
9 0 0 l t For 900μm Loose Buffer ABF Breakout Kit Compatible
2 . 0 For 2.0mm Cord
3 . 0 For 3.0mm Cord
3 . 0 d c lOnly for LC Duplex Application with 3.0mm Cord
lynX2p4 - part numbering Guide (4 Piece Packaging Including Ferrule Holder)
tool Kits and accessory Ordering Guide part number description Media type
250µm 2mm
900µm 3mm
LYNX2-TKU-2.0-3.0 Lynx2 Tool Kit for 2.0/3.0mm a a
LYNX2-CORDTOOL-2.0-3.0 Cord Prep Tool for 2.0/3.0mm a
LYNX2-HOLDER-C Plastic Ferrule Holder (Sumitomo & New Competitor Splicers) a a
LYNX2-UML-C Lynx2, Ferrule Side Holder, Metal/Universal a a
LYNX2-UML-S Lynx2, Splice Sleeve Side Holder, Metal/Universal a a
FHS-025-LB5 Fiber Holder, Loose Buffer 250/900µm, 900LT a a
LYNX-SHEARS Kevlar Cutters a
JR-M03 Jacket Remover a a
LYNX2-ST-AT-01 ST Assembly Tool a a
LYNX2-DUPLEX CLIP-LC Duplex Clip for LC a a
LYNX2-DUPLEX CLIP-SC Duplex Clip for SC a a
(Not Available in APC)
Quantum Type-QH201e-VS™ Handheld Fusion Splicer Shown with Optional Lynx2-PLUS CustomFit® Splice-On Connector
For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com22
Lynx2-MPO CustomFit® Splice-On Connectors
description
Sumitomo’s Lynx2-MPO is the industry’s first MPO fusion splice-on field installable connector for customized, on-site, terminations. The breakthrough technology of the Lynx2-MPO meets the needs of the network for greater optical fiber density and addresses the connectivity demands for faster and easier terminations, upgrades, repairs and restorations, and significant cost savings required for today’s data center, enterprise network, outside plant, OEM, central office, and virtually any FTTx network application.
Features
• Industry’s First MPO Field Installable, Fusion Splice-On Connector
• Cuts Time, Material, and Labor Costs
• Eliminates Logistical Delays of Pre-Engineered Cables
• Guide Pins for Precision Alignment (Male Only)
• Color Coded Housing
• Compatible with Optical Ribbon Fiber and Round Cord 12ct. Loose Tube
• Customizable Field Polarity Management
• EIA/TIA-604-5, FOCIS 5, IEC-61754-7 Compliant
specifications connector type sMF:
low losssMF:
standardMMF: 0M1
MMF: 0M2
MMF: 0M3
Polish Angled Angled Flat Flat Flat
Housing Color Yellow Green Beige Black Aqua
Typical Insertion Loss .10dB) .25dB .10dB .10dB .10dB
Maximum Insertion Loss ≤.35dB ≤.75dB ≤.35dB ≤.35dB ≤.35dB
Return Loss ≥ 60dB ≥ 60dB ≥ 20dB ≥ 20dB ≥ 20dB
MTP® compatible, the Lynx2-MPO is the perfect solution for optical fiber ribbon and loose tube round cord and patch cord terminations. Like all Lynx2 fusion splice-on connectors (SC, LC, FC, and ST), the Lynx2-MPO allows the technician to make permanent terminations with the exact cable length for fast and easy installations and upgrades at the work site. The on-site customization facilitated by the Lynx2 connectivity method eliminates the risk of shorts and slack, repair lag, and logistic delays associated with preterminated cables and pigtails — making the Lynx2-MPO your best choice in customized fiber termination.
Connectorssplice-on
23For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com
tool Kits and accessory Ordering Guide part number description
LYNX2-CORDTOOL-2.0-3.0 Lynx2 SOC, Cord Prep Tool, 2/3mm
FA-03 Fiber Arrangement Tool for Lynx2-MPO
FAC-24 Consumables for Fiber Arrangement Tool (Makes ~30 Ribbons)
FAC-24-003-A Adhesive for Fiber Arrangement Tool (Included in FAC-24)
FHM-12-MPO-MTL Lynx2-MPO Ferrule Holder, Metal/Universal
FHM-12-MPO-PLS Lynx2-MPO Ferrule Holder, Plastic/Universal
LYNX2-TKU-MPO-RCATK Tool Kit for Terminating Connectors onto Round Cord and Jacketed Ribbon Includes; Assembly Platform with Integrated Fiber Arrangement Tool, Adhesive, Cord Prep Tool, Metal MPO Ferrule Holder, Kevlar® Shears, Backpack
LYNX2-ATK2-MPO Assembly Platform with Integrated Fiber Arrangement Tool
LYNX2-HRT-1 MPO Outer Housing Disassembly Tool
TYPE-Q101-M12-KIT-MPO1 Quantum Mass Fusion Splicer, Cleaver, Heated Jacket Remover, Spare Electrodes, V-Groove Brush, Power Cord, Manual, Hard Case, MPO Assembly Tool Kit, Consumable Kit
TYPE-Q101-M12-KIT-MPO2 Includes KIT-MPO1 Contents; Plus Battery
lynX2-MpO - part numbering Guide
LYNX2-MPO12 A (A = Connector Gender)
M (Male)
F (Female)
S M(Single-Mode)
M M(Multimode)
B B (BB = Fiber)
C C(CC = Fiber Type)
L LLow Loss(IL ≤ 35dB RL ≥ 60dB) YELLOW HOUSING
S LStandard Loss(IL ≤ 75dB RL ≥ 60dB) GREEN HOUSING
0 1Multimode 62.5μm(IL ≤ 35dB RL ≥ 20dB) BEIGE HOUSING
0 2Multimode 50μm(IL ≤ 35dB RL ≥ 20dB) BLACK HOUSING
0 3Multimode 50μm Laser Optimized(IL ≤ 35dB RL ≥ 20dB) AQUA HOUSING
OM3 & OM4 Compatible
EXAMPLES(LYNX2-MPO12-ABBCC-DDDdd-eee)
R B N For 12f Ribbon (No Jacket)
R B C For 12f Ribbon (With Jacket)
R C 3 . 0For 3.0mm Cord
S T U b Ferrule Stub Only
D D D d d(DDDdd = Fiber Media)
e e e(eee = Bulk Package Only)
x 100EA
b l K(100 Pieces)
POLARITY
Specifying Polarity is not required. See
installation instructions.
LYNX2 – MPO12 F - S M L L - R B N - Part Number is: LYNX2–MPO12F-SMLL-RBN LYNX2 – MPO12 M - M M 0 3 - R C 3 . 0 - Part Number is: LYNX2–MPO12M-MM03-RC3.0
(Bulk Example)LYNX2 – MPO12 F - M M 0 2 - S T U b _ - b l KPart Number is: LYNX2–MPO12F-MM02-STUB-BLK
MTP is a registered trademark of US Conec. Kevlar is a registered trademark of DuPont.
For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com24
Features the Quantum is the 1st and Only splicer in the industry with:
• High Resolution, Fully Navigational, Touch Screen Monitor for Optimum User Friendliness
• Internet Interface for Remote Maintenance & Software Upgrades
• Largest Fiber View
Other Features include:
• Dual Independent Heat Shrink Ovens, Increasing Splicing Efficiency by 70%
• High Resolution Direct Core Monitoring & 3-Axis Core Alignment
• Ruggedized Design for Superior Shock, Water, and Dust Resistance
• Automatic Splice Start, Arc Calibration, Heater Start and Fiber Identification
• Hard Carrying Case with Integrated Work Platform
• Fiber Holder or Fiber Clamp Selectable
• Type-Q101-CA Quantum Splicer• Hard Transit Case• Work Platform• AC Adapter• Standard Battery
• Cleaning Tools• Fiber Protection Sleeve Cooling Tray• Manual• Fiber Optic Stripper
type-Q101-ca-Kit-1 components:
Includes All of KIT-1 Components; Plus FC-6S-C Fiber Optic Cleaver
type-Q101-ca-Kit-2:
product number: Kit components
Includes All of KIT-1 Components; Plus FC-6RS-C Precision Bench Top Automatic Blade Rotation Cleaver
type-Q101-ca-Kit-6rsc:
Quantum Type-Q101-CA™ Core Alignment Fusion Splicer
Includes All of KIT-1 Components; Plus FC-7R Hand-Held Automatic Blade Rotation Cleaver
type-Q101-ca-Kit-2r:
Quantum Transit Case as Work Surface
Shown with Optional Lynx2 CustomFit® Splice-On Connector
• Multiple Positional Monitor with Automatic Display Inversion
• Long Life Battery Recharges While Splicing with AC Power
• Lynx2 CustomFit® Splice-On Connector Compatibility
• Typical Splice Loss: SMF: 0.02dB; MMF: 0.01dB; NZ-DSF: 0.04dB; Return Loss: <70dB
• 7 Second Typical Splice Time
• RoHS Compliant
physical characteristics size(mm) 120W x 154D x 130H
Weight 2.1kg with Battery
display type 4.1 Color, Low Glare, High Resolution Touch Screen Monitor
shock – Free Fall 76cm from 5 sides
Waterproof IPx2
dustproof IP5x
Wind protection 30mph (15m/s)
battery docking bay Internal
• SD Port for Virtually Unlimited Data Storage; Plus Program, Video, Audio, and Software Uploads/Downloads
• Lightest Weight & Smallest Footprint Core Alignment Splicer
• Longest Electrode Life
SplicersFusion
25For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com
Quantum Type-Q101-M12™ Mass Fusion Splicer
Features the Quantum is the 1st and Only Mass Fusion splicer in the industry with:
• Automatic Clamp Force Adjustment & Real-Time Clamp Force Calibration, Minimizing Fiber to Fiber Offset for Splicing and MPO Terminations
• Dual Independent Heat Shrink Ovens with Auto Pretension Clamps, Increasing Splicing Efficiency by 70%
• High Resolution, Fully Navigational, Touch Screen Monitor
• Internet Interface for Remote Maintenance & Software Upgrades
Other Features include:
• Ruggedized Design for Superior Shock, Water, and Dust Resistance
• Auto Splice Start, Arc Calibration, Heater Start and Fiber Identification
• Typical Splice Loss: SMF: 0.05dB; MMF: 0.02dB; NZ-DSF: 0.08dB
• Hard Carrying Case with Integrated Work Platform
• Quantum Mass Fusion Splicer• Precision Automatic Blade Rotation
Fiber Cleaver• Heated Jacket Remover• Power Cord• V-Groove Brush
• Spare Electrodes• Manual• 250μm Holders• 12ct. Ribbon Fiber Holders• Hard Case
• Quantum Mass Fusion Splicer• Cleaver• Heated Jacket Remover• Power Cord• V-Groove Brush
• Spare Electrodes• Manual• Hard Case• MPO Assembly Tool Kit
• Consumable Kit
type-Q101-M12-Kit-6rM1 components:
type-Q101-M12-Kit-MpO1 components:
Includes All Type-Q101-M12-6RM1Contents; Plus Ribbonizing Tool and Consumable Kit.
type-Q101-M12-Kit-6rM2 components:
product number: Kit components
Includes KIT-MPO1 Contents; Plus Battery
type-Q101-M12-Kit-MpO2 components:
Shown with Optional Lynx2-MPO CustomFit® Splice-On Connector
Quantum Transit Case as Work Surface
• Multiple Positional Monitor with Automatic Display Inversion
• Long Life Battery Recharges While Splicing with AC Power
• Lynx2 CustomFit® Splice-On Connector Compatibility
• RoHS Compliant
physical characteristics size(mm) 120W x 154D x 130H
Weight 2.0kg with Battery
display type 4.1 Color, Low Glare, High Resolution Touch Screen Monitor
shock – Free Fall 76cm from 5 sides
Waterproof IPx2
dustproof IP5x
Wind protection 30mph (15m/s)
battery docking bay Internal
• Typical 14 Second Splice & 55 Second Heater Cycle Time Makes the Quantum the Fastest Mass Splicer with a 12 Fiber Splice Under 70 Seconds
• SD Port for Virtually Unlimited Data Storage; Plus Video, Audio, and Software Uploads/ Downloads
• Lightest Weight & Smallest Footprint Mass Fusion Splicer
• Largest 640 x 320 Fiber View and Longest Electrode Life
For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com26
Features
the Quantum v-Groove is the 1st and Only splicer in the industry with: • High Resolution, Fully Navigational,
Touch Screen Monitor for Optimum User Friendliness
• Internet Interface for Remote Maintenance & Software Upgrades
• SD Port for Virtually Unlimited Data Storage; Plus Program, Video, Audio, and Software Uploads/Downloads
• Video & Audio Playback
Other Features include: • Industry’s Most Advanced, yet
Affordable, V-Groove Splicer
• Dual Independent Heat Shrink Ovens, Increasing Splicing Efficiency by 70%
• Ruggedized Design for Shock, Water, and Dust resistance
• Automatic Splice Start, Arc Calibration, Heater Start
• Hard Carrying Case with Integrated Work Platform
• Multiple Positional Monitor with Automatic Display Inversion
• Type-Q101-VS Quantum Splicer• Hard Transit Case• Work Platform• AC Adapter• Standard Battery• Cleaning Tools
• Fiber protection Sleeve Cooling Tray• Manual• Fiber Optic Stripper• 250μm & 900μm Fiber Holders• Cleaning Tools
type-Q101-vs-Kit-1 components:
Includes All of KIT-1 Components; Plus FC-6S-C Fiber Optic Cleaver
type-Q101-vs-Kit-2:
product number: Kit components
Includes All of KIT-1 Components; Plus FC6RS-C Precision Bench Top Automatic Blade Rotation Cleaver
type-Q101-vs-Kit-6rsc:
Quantum Type-Q101-VS™ V-Groove Fusion Splicer
Includes All of KIT-1 Components; Plus FC7R hand-Held automatic Blade Rotation Cleaver
type-Q101-vs-Kit-2r:
Quantum Transit Case as Work Surface
Shown with Optional Lynx2 CustomFit® Splice-On Connector
physical characteristics size(mm) 120W x 154D x 130H
Weight 2.1kg with Battery
display type 4.1 Color, Low Glare, High Resolution Touch Screen Monitor
shock – Free Fall 76cm from 5 sides
Waterproof IPx2
dustproof IP5x
Wind protection 30mph (15m/s)
battery docking bay Internal
• Battery Recharges While Splicing with AC Power
• Lynx2 CustomFit Splice-On Connector Compatibility
• Large Fiber View and Long Electrode Life
• Typical Splice Loss: SMF:0.05dB; MMF: 0.02dB
• Typical Splice Time: 9 seconds
• Return Loss: <-70dB
• RoHS Compliant
SplicersFusion
27For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com
Quantum Type-QH201e-VS™ Handheld Fusion Splicer
Features
• Industry’s Only High Resolution, Fully Navigational, Touch Screen Monitor
• Industry’s Smallest Handheld Footprint and Fastest 12 Second Typical Splice Time
• Internal Battery Charging while Splicing
• Dual Bay External Battery Charger Available
• Internet Interface for Remote Maintenance & Software Upgrades
• Micro-SD Ports for Virtually Unlimited Data Storage
physical characteristics Size(mm) 110W x 140D x 76H
Weight 860 g (Including Battery)
Display Type 3.5 Color Touch Screen Monitor
Shock Resistance – Free Fall 76cm from 5 sides
Waterproof IPx2
Dustproof IP5x
Wind Protection 30mph (15m/s)
• Type-QH201e-VS Splicer
• Spare Electrodes
• *Transit Case with Hard Case or Backpack Options (part number extension)
• AC Adapter and Power Cord
• 250µm Fiber Holders
• Standard Battery
• Cleaning Tools
• Manual
• Fiber Optic Stripper
type-QH201e-vs-Kit-1 components: b or H
Includes All of Kit-1 Components; Plus FC-6S Precision Optical Cleaver
type-QH201e-vs-Kit-2:
product number: Kit components
Includes All of Kit-1 Components; plus a Precision Optical Cleaver with Automatic Rotating Blade and Scrap Catcher
type-QH201e-vs-Kit-2r, type- QH201e-vs-Kit-6rsc
Quantum Type-QH201e-VS Shown with Optional WT-201 Work Platform
Shown with Optional Lynx2 CustomFit® Splice-On Connector
• Built-In Help and Maintenance Videos
• Automatic Splice Start, Arc Calibration and Heater Start
• Extended Life Electrodes Standard
• Hard or Soft Transit Case
• Easy to Use Fiber Holder Based System
• Lynx2 CustomFit® Splice-On Connector Compatible
• Typical Splice Loss: SMF: 0.05dB, MMF: 0.03dB
• 24-Hour Technical Support
• RoHS Compliant
New!New!
the Only thing More reliable than Our Splicers is Our Service: 24-Hour technical support via 888-sPLICer
* Part Number Will Add a B or H at the End to Designate Hard Case or Backpack Example: TYPE-QH201e-VS-KIT-1H
For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com28
FC-6RM-C and FC-6RS Precision Automatic Blade Rotation Cleavers
Features
• Industry’s 1st and Only 1 to 12-Fiber Ribbon Cleaver with Automatic Blade Rotation
• Ideal Cleaver Design for Mechanical Connectors
• Ideal Cleaver for High Volume Precision Cleaving Applications in Any Environment
• Compatible with All Sumitomo Electric Fusion Splicers
• Precision Blade Features 24 Blade Positions with 2,000 Cleaves per Position
FC-6RM-C (Shown)
Features
• FC-7R: Industry’s Only 1-Step Optical Fiber Cleaver with Automatic Blade Rotation
• Features Automatic Fiber Scrap Collection
• Works With Sumitomo Fiber Holders
• Manual Blade Rotation Not Required
• Blade Height Adjustment Not Required
FC-7R Handheld, 1-Step Auto Blade Rotation Cleaver
Features
• Ideal Design for APC Terminations
• Rugged Low Maintenance Construction
• Repeatable 8° Cleaves
• Easy to Use “Stapler” Action
• Built-in Fiber Scrap Collector
FC-SE-AFC-08 One-Step Angled Optical Fiber Cleaver
• 48,000 Consecutive Fiber Cleaves Without User Manually Rotating the Blade or Adjusting Height
• Single Fiber, FC-6RS Model Available With or Without Scrap Collector
• User Selectable Blade Rotation Options Include: Automatic Blade Rotation with Each Fiber Cleave, No Rotation, and Single Position Advance
• FC-6RM-C Includes Scrap Collector
• Industry’s Standard Table-Top Design
• RoHS Compliant
• Can Be Used for Single Fiber Cleaving or Up to 8 Count Ribbon
• Ideal Cleaver Design for Mechanical Connectors
• Prevents Double Scoring of Fibers
• Rugged Aluminum Alloy Outer Housing
• RoHS Compliant
• Multi-Position Diamond Blade
• End Face Curved but Nearly Flat Across Core
• Preset 8° Cleave Angle without User Adjustment
• RoHS Compliant
part number Ordering information part number description
FC-SE-AFC-08 Angled Cleaver for APC Connectors
FC-7R Automatic Blade Rotation Cleaver
FC-6RS Single Fiber Cleaver, Without Fiber Scrap Catcher
FC-6RS-C Single Fiber Cleaver, With Fiber Scrap Catcher
FC-6RM-C FC-6RM-C Single or Ribbon Cleaver, With Fiber Scrap Catcher Connectors and Bulkheads
Cleaversoptical Fiber
29For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com
PureConnect™ Connector/Bulkhead Cleaners
pureconnect™ Features
• High Performance, Lint Free, Anti-Static, Micro-Fiber, Connector Ferrule/Bulkhead Cleaning Cloth
• Highly Effective Cleaning Solution without Using Solvents
pureconnect™ simplex cleaners
Features
• Smooth and Easy Pushing Motion Initiates Cleaning Process
• Audible Click When Cleaning Tool is Engaged with Ferrule
MTP® is a registered trademark of U.S. Conec.
pureconnect™ Multi-Fiber cleaner
MpO – Cleans MTP® Brand Connectors and Generic MPO Connectors with a UPC and APC Polish
Features
• Cleans Male and Female MPO Ferrules
• Smooth and Easy Dial Rotation Initiates Cleaning Process
Ordering information part number description
EFC-125-S PureConnect Endface Cleaner for LC Connectors and Bulkheads
EFC-250-S PureConnect Endface Cleaner for SC, ST, FC, and E2000 Connectors and Bulkheads
Ordering information part number description
EFC-MPO-S PureConnect Endface Cleaner for MPO Connectors and Bulkheads
• Audible Click Indexes Cleaning Cloth
• 600+ Cleanings
• Nozzle Extends to Reach Recessed Connectors
• Over 525+ Cleanings
• Easy to Use Cloth Optimally Removes Even the Toughest Debris, such as Dust and Oil
• End-cap Acts as an Adapter to Clean Unmated Connectors
Fusion Splicing Cleaning Kit
Fusion splicing Kit Features
• Best Tested Cleaning Formulas
• Remove Contaminants in Harshest Environments
• Achieves Ideal Splicing Performance
• Includes Carrying Case Designed to Fit Inside the Splicer Transit Case
Ordering information part number description
FUS-CLN-KIT-OSP Fusion Splicing Cleaning Kit for OSP
consumable items part number description
FOC-QE Cleaner, Fiber Optic, Quick Evaporating
FCW-HQ-50 Wipes, Cleaning, Lint Free, 50/ea
VGB-003-CR V-Groove Cleaning Brush
GCB-001 Non-Scratching Duster Brush
SCB-001 Retractable Soft Bristle Brush
SBB-001 Double-Sided Stiff Bristle Scrub Brush
CMG-001 Lighted Magnifier
CTSW-PK Lint Free Cotton Swabs, 25/ea
New!New!
Cleanerssplicer and Connector
For ordering assistance, please contact Customer Service at 800-358-7378 or visit our website at: www.sumitomoelectric.com30
Quick–SC & LC™ Field Assembly Connectors
Features
• Quick and Skill-free Installation, Without Adhesives or Polishing
• 1-Minute or Less Low-loss Terminations
• Eliminates Bulky Mechanical Crimping Tools
• Improves Mechanical Splicing with Immediate Splice Verification
Qsc-apcsM-250900 QUICK-SC, APC SMF 250/900μm 1 ea.Qsc-upcsM-250900 QUICK-SC, UPC SMF 250/900μm 1 ea.Qsc-pcMM5-250900 QUICK-SC, PC MM 50μm, 250/900μm 1 ea.Qsc-pcMM5OM3-250900 QUICK-SC, PC MM 50μm OM3/4, 250/900μm 1 ea.Qsc-pcMM6-250900 QUICK-SC, PC MM 62.5μm, 250/900μm 1 ea.Qlc-upcsM-250900 QUICK-LC, UPC SMF 250/900μm 1 ea.Qlc-pcMM5-250900 QUICK-LC, PC MM 50μm, 250/900μm 1 ea.Qlc-pcMM5OM3-250900 QUICK-LC, PC MM 50μm OM3/4, 250/900μm 1 ea.Qlc-pcMM6-250900 QUICK-LC, PC MM 62.5μm, 250/900μm 1 ea.Qsc-aJiG-base QUICK-SC, Assembly Jig Base 1 ea.Qlc-aJiG-base QUICK-LC, Assembly Jig Base 1 ea.Qsc-lc-Hld-09 QUICK-SC/LC, 900μm Fiber Holder 1 ea.Qsc-tK-apc-cF Tool Kit for QUICK-SC APC Connectors, 1 ea. Cabled FiberQsc-lc-tK-upc-cF-06 Tool Kit for QUICK UPC Connectors, 1 ea. Cabled Fiber w/ FC-6 CleaverQsc-lc-tK-upc-cF-07r Tool Kit for QUICK UPC Connectors, 1 ea. Cabled Fiber w/ FC-7R Cleaver
sumitomo p/n description uOM
Quick sc and lc Ordering information
Quick-SC
Quick-SC Assembly Jig and Fiber Holder
Quick-LC
Quick-LC Assembly Jig and Fiber Holder
connector type SC, LC
coating diameter 250μm, 900μm
Fiber type sM MM(50), MM(62.5), MM50(OM3/4)
polishing APC* UPC PC
insertion loss Typical 0.3dB Typical 0.2dB Typical 0.1dB Max. 0.75dB Max. 0.5dB Max. 0.3dB
return loss Typical 60dB Typical 55dB Typical 35dB Min. 50dB Min. 40 dB Min. 22 dB
specifications
*APC connectors require 8° angled cleaves
Assembly Jig and Fiber Holder must be order separately.
Tool Kits Include: Cleaver, Fiber Optic Strippers and Backpack
• Visible Inspection – Light Disappears When Installation is Successful
• Quick SC and LC Mechanical Connectors are Compatible with Standard SC (IEC 61754-4) and LC (IEC 61754-20) Connectors
ConnectorsMechanical
Sumitomo Electric Lightwave reserves the right to make changes to the product(s) or information contained herein without notice. While the information supplied herein is believed to be accurate and reliable, Sumitomo Electric Lightwave assumes no responsibility for errors, omissions or future changes. Quantum Fusion Splicers, PrecisionFlex, and 4th Level are trademarks of Sumitomo Electric Lightwave. Lynx2 CustomFit, FutureFLEX, and Air-blown Fiber are registered trademarks of Sumitomo Electric Lightwave Corp. MTP is a registered trademark of US Conec. Kevlar is a registered trademark of DuPont.
Licensed 4th Level Installers Program
WarrantiesSumitomo Electric Lightwave (SEL) is pleased to offer its valued customers comprehensive warranty options for their 4th Level product installations. At SEL, our dedication to offering the highest quality and most reliable products allows us to include up to an extended 25 year warranty and commitment to you and your network installation.
4th level Warranty programs: One (1) Year Standard Warranty: SEL warrants the Lynx2 CustomFit® Splice-On Connectors and 4th Level cable products to be free of defects in material and workmanship for a period of one (1) year from the date of shipment.
Fifteen (15) and Twenty-five (25) Year Extended Warranties: SEL warrants the Lynx2 CustomFit® Splice-On Connectors and 4th Level cable products to be free of defects in material and workmanship for a period of fifteen (15) or twenty-five (25) years from the date of shipment.
These extended warranties are available for installations using Lynx2 CustomFit® Splice-On Connectors and 4th Level cable products that have been accepted by SEL into the Extended Warranty Program. Furthermore, the installation shall be performed by an SEL certified installer and all optical fiber splices and terminations shall be performed using Sumitomo optical fiber fusion splicer(s) with current calibration certificate. For more information about 4th Level warranties, please call 855-412-9838 or visit www.sumitomoelectric.com.
Fusion splicer Warranty programs: Sumitomo Electric Lightwave also offers various comprehensive warranty options for its renowned fusion splicer product line. For information about fusion splicer warranties, please contact customer service at 800-358-7378 or visit www.sumitomoelectric.com.
th
Take Your Network To The Highest
Lev
el
TM
This program is designed to provide a suite of benefits to both end-users and installers. Benefits include:
a. For end-users a. Quality – Networks constructed using Sumitomo Electric Lightwave’s (SEL) advanced and high quality 4th Level suite of solutions and products
b. Guarantee – Networks built by DIRECTLY TRAINED Licensed 4th Level Installers with one of two Sumitomo backed warranty offerings of 15 years and up to 25 years coverage
c. ecOnOMical satisFactiOn – Solutions designed for performance and efficiency around end-user requirements. Example…SEL proprietary 8ct based fiber solution minimizes link loss while also yielding savings of ~$100 per port in 40G networks
b. For installers a. KnOW HOW & credits – Installers will receive DIRECT practical hands-on training for working with and properly installing 4th Level solutions and products. The training session is also BICSI accredited!
b. reFerrals – Licensed 4th Level Installers are referred for end-user projects
c. reWards – Licensed 4th Level Installers are rewarded for specifying and procuring SEL’s 4th Level solutions and products through a generous benefit program
Contacts
LNP-2014© 2014 Sumitomo Electric Lightwave Corp. (A Sumitomo Electric Group Company)
All rights reserved. 0714
sumitomo electric lightwave corp.
78 T.W. Alexander Drive
Research Triangle Park, NC 27709
Toll-free: (800) 358-7378
Tel: (919) 541-8100
Fax: (919) 541-8265
E-mail: [email protected]
Website: www.sumitomoelectric.com
Sumitomo Electric Lightwave provides the latest and
most advanced integrated and end-to-end optical fiber
solutions that leverage your existing network’s physical
layer infrastructure — while quickly, easily, and most cost
effectively allowing you to support 10G today and
40G/100G tomorrow.
What differentiates Sumitomo Electric Lightwave’s
4th Level data center and network solutions from other
systems is the enablement of flexible, Real-Time, On-Site
infrastructure design. Regardless of the size of your data
center, 4th Level solutions will help you to meet upcoming
exponential growth and optimize the bandwidth demands
of your network today as you simultaneously build your data
center for the future — with superior quality products and
unprecedented service and support.
Our outstanding technical support and customer service
personnel look forward to assisting you.
Sumitomo
th
Take Your Network To The Highest
Lev
el
TM