empotrables_recessed
smoothPlus
fichatécnica_datasheet
fichatécnica_datasheet
incluido_included no incluido_not includedni
Ø112
50
CEILING CUT
+m
ódul
o
Ø120
para módulo LED
8110
aluminio inyectadoy acero
die cast aluminiumand steel
materiales_materials
Ø112CEILING CUT
Ø120
125
Ø112 30º
IP20
LAMPNOTINCL.
para kit QR-CB51 / PAR16LED
compatible:
LEDmodule
PAR16LED
QR-CB51
QR-CB51, GU-5,3
no incluidonot included
n
PAR16LED, GU-10
no incluidonot included
n
módulo LED Ø50mm
no incluidonot included
n
831T
colores_colors
interiorinside
85M
colores_colors
exterioroutside
31T
portalámparas GU-10no incluido
not included
n
8119616
portalámparas GU-5,3no incluido
not included
n
Y020401140
NOT INCL.
smoothPlus
empotrables_recessed fichatécnica_datasheet
INSTRUCCIONES_INSTRUCTION
Switch off the mains.
Make an accurate ceiling cut with the shown dimensions.
Desconectar la correinte.
Realizar el corte de techo con la medida precisa indicada.
CLAP!
Connect the mains feed to the driver.
In the GU10 model, connect the mains feed directly to the luminaire terminal block.
Conectar el latiguillo al dri-ver de la luminaria.
En caso de lámpara GU10, conectar directamente a la clema de la luminaria.
CLAP!
Hide the driver and the cable in the false ceiling.
Ocultar el driver y el latigui-llo en el falso techo.
CLAP!
Insert the heat sinker and the excess cable in the cei-ling cut.
Force the springs to an upri-ght position.
Introducir en el falso techo el disipador de la luminaria y el resto de cable.
Forzar los muelles hacia arriba...
CLAP!
Insert the luminaire body into the ceiling cut, being careful that the springs are not da-maging the false ceiling.
Introducir en el falso techo el cuerpo de la luminaria con cuidado de no dañar el falso techo con los muelles.
CLAP!
Slide in slowly until the springs press and fasten the luminaire to the false ceiling.
The luminaire is ready, turn on the mains.
Deslizar lentamente hasta que los muelles presionen y fijen la luminaria contra el falso techo.
La luminaria está lista, co-nectar la correinte.
CLAP!
8110
fichatécnica_datasheet
empotrables_recessed
smoothPlus
fichatécnica_datasheet
fichatécnica_datasheet
incluido_included no incluido_not includedni
módulo LEDLED module
no incluidonot included
TRIDONIC
SR120024827 1010 2700 24 80 10,7 W 30,6V 350mA
SR120040827 1010 2700 40 80 10,7 W 30,6V 350mA
SR120024830 1100 3000 24 80 10,7 W 30,6V 350mA
SR120040830 1100 3000 40 80 10,7 W 30,6V 350mA
SR120024840 1200 4000 24 80 10,7 W 30,6V 350mA
SR120040840 1200 4000 40 80 10,7 W 30,6V 350mA
SR140024827 1230 2700 24 80 12,8 W 36,5V 350mA
SR140040827 1230 2700 40 80 12,8 W 36,5V 350mA
SR140024830 1340 3000 24 80 12,8 W 36,5V 350mA
SR140040830 1340 3000 40 80 12,8 W 36,5V 350mA
SR140024840 1460 4000 24 80 12,8 W 36,5V 350mA
SR140040840 1460 4000 40 80 12,8 W 36,5V 350mA
OSRAM
TR120024927 1140 2700 24 90 12,2 W 32,4V 350mA
TR120036927 1140 2700 36 90 12,2 W 32,4V 350mA
TR120024930 1170 3000 24 90 12,2 W 32,4V 350mA
TR120036930 1170 3000 36 90 12,2 W 32,4V 350mA
TR120024940 1270 4000 24 90 12,2 W 32,4V 350mA
TR120036940 1270 4000 36 90 12,2 W 32,4V 350mA
CODIGO LM ºK APERTURA CRI W V A
TRIDONIC
TR070024927 710 2700 24 90 9,5 W
TR070036927 710 2700 36 90 9,5 W
TR070024930 760 3000 24 90 9,5 W
TR070036930 760 3000 36 90 9,5 W
TR070024940 810 4000 24 90 9,5 W
TR070036940 810 4000 36 90 9,5 W
CODIGO LM ºK APERTURA CRI W
MG050024828 500 2800 24 80 8,0 W
MG050036828 500 2800 36 80 8,0 W
MG050024840 500 4000 24 80 8,0 W
MG050036840 500 4000 36 80 8,0 W
MG090024828 900 2800 24 80 10,5 W
MG090036828 900 2800 36 80 10,5 W
MG090024840 900 4000 24 80 10,5 W
MG090036840 900 4000 36 80 10,5 W
CODIGO LM TC APERTURA CRI POTENCIA
CODE LM ºK BEAM ANG. CRI W
CODE LM ºK BEAM ANG. CRI W
MEGAMAN
50
50
70
50
75
50
75
50
directo a red - main voltage bajo voltaje - low voltage (driver no incl. - driver not incl.)
módulo LEDLED module
no incluidonot included
IP20 IP20
NOT INCL.
CODE LM ºK BEAM ANG. CRI W V A
CODIGO LM ºK APERTURA CRI W V A
CODE LM ºK BEAM ANG. CRI W V A
driver compatible 9973020PH-350
driver compatible 9973020PH-350