A single automated process enhancing your laboratory environment performance
The automated laboratory
Laboratory solutions
Sample announcement
Sample preparation
Sample analysis
Samples can be either delivered to the automated laboratory manually by shift personnel or automatically by airtube systems. In the latter case, samples will be ready for sample preparation after automatic unpacking.
Samples can be in the form of a solid metal (e.g. lollipop or rounds) or powder (e.g. slag). Depending on the measurement requirements, metals may need to be cooled down, then milled or ground, prior to analysis. If the sample is powdered, it would need crushing, milling and pressing prior to analysis.
Several techniques can be integrated in the automated laboratory to perform a complete characterization of your sample:
• Accurate chemical analysis of major and minor elements by X-ray fluorescence spectrometry (XRF) with additional light-element analysis by optical emission spectrometry (OES)
• Analysis of structural properties by X-ray diffraction analysis (XRD)
• ß and γ radiation detection to comply with norms and certifications
• Sample surface analysis to detect surface flaws and check pressed powder sample quality
Select your option
Airtube systems
Manual announcement
Bulk announcement
Automated announcement
Barcode (RFiD)
Select your option
XRF analysis
XRD analysis
OES analysis
Radioactivity analysis
Machine vision sample surface analysis
Select your option
Solid samples- weighing- cooling- milling- grinding
Automatic metal chip generation for combustion analysis
Powder samples- weighing- cooling- milling- grinding
Automated announcement
Barcode (RFiD)
Interfacing/communication
Environment/infrastructure
The automated laboratory can be integrated in existing laboratory environments. Otherwise, a container-based laboratory can be placed anywhere to expand the laboratory installation, giving the customers a pre-installed and ‘ready-to-go’ solution. The size of the containers can be customized based on the complexity of the automation project.
Select your option
SamTracsSample tracking and control system
LIMSLaboratory information management system
Level 2 communication
Customized analysis results transmission and printing
Automatic signage & narrowcasting
Select your option
Turnkey - customized(container-based buildings)
Turnkey - standard(20 - 30 feet based container solutions)
In-house placement
SamTracs (sample tracking and analysis control system) is a PANalytical software package for the efficient management of automated analysis installations.
SamTracs allows easy user interface, sub-processing, and results reporting procedures to be tailored precisely to individual needs.
Alt
ho
ug
h d
ilig
ent
care
has
bee
n u
sed
to
en
sure
th
at t
he
info
rmat
ion
her
ein
is a
ccu
rate
, no
thin
g c
on
tain
ed h
erei
n c
an b
e co
nst
rued
to
imp
ly a
ny
rep
rese
nta
tio
n o
r w
arra
nty
as
to t
he
accu
racy
, cu
rren
cy o
r co
mp
lete
nes
s o
f th
is in
form
atio
n. T
he
con
ten
t h
ereo
f is
su
bje
ct t
o c
han
ge
wit
ho
ut
furt
her
no
tice
. Pl
ease
co
nta
ct u
s fo
r th
e la
test
ver
sio
n o
f th
is d
ocu
men
t o
r fu
rth
er in
form
atio
n. ©
PA
Nal
ytic
al B
.V.,
Alm
elo
/ Th
e N
eth
erla
nd
s. 9
498
704
0881
2 PN
1068
7
Global and near
PANalytical B.V.Lelyweg 1, 7602 EA AlmeloP.O. Box 13, 7600 AA AlmeloThe NetherlandsT +31 (0) 546 534 444F +31 (0) 546 534 598 [email protected]
Regional sales officesAmericasT +1 508 647 1100 F +1 508 647 1115
Europe, Middle East, AfricaT +31 (0) 546 834 444 F +31 (0) 546 834 499
Asia PacificT +65 6741 2868 F +65 6741 2166
The automated laboratoryThe conceptWithin an automated laboratory, the complete sample transportation, preparation, and analysis process can be automated. Our automation projects can cover all steps involved in process control and quality control:
• Sample treatment before sending • Sample transportation to and within
the laboratory • Preparation of the sample material • Sample analysis and results
distribution • Control of the automated laboratory • Container solutions
The automated laboratory is a multidisciplinary strategy to increase the productivity and reduce lab process cycle times of our customers by making the best use of technology. By investing in an automated laboratory, customers will get the benefit of fast return of investments and higher turnovers as well as saving manpower that could be allocated in other departments.
Based on customer needs, the automated laboratory is designed for the customer and with the customer. The level of equipment varies from ‘single lines’ (one preparation machine coupled with one analysis system) to multiple lines where a number of preparation machines can be coupled to a number of analysis systems. PANalytical works with carefully selected project partners with specialist expertise.
Project partners are usually chosen in cooperation with the customer to provide tailored solutions for individual client needs. In choosing project partners, we take into consideration not only technical capabilities, but also support, service, spare parts and all the other factors that contribute to a reliable backup.
PANalytical is not only the world’s leading supplier for X-ray instruments, but also recognizes also the added value of X-ray systems in an integrated automated laboratory. We have built automation projects since 1994, surpassing 90 installations worldwide.
www.panalytical.com/automation