TESDA Policy and Procedures
Accreditation of Competency Assessment Centers
1.0 Purpose and Scope
1.1 Purpose
The Accreditation of Assessment Center Procedure provides a system of instructions to ensure all relevant stakeholders (TESDA Staff, Assessment Centers, Assessors, Applicant-Candidate) of the Philippine TVET Qualification and Certification System or PTQCS have a shared understanding of the detailed activities to be undertaken for the Accreditation of Competency Assessment Centers at the provincial/district and regional level.
1.2 Scope
The procedure includes the accreditation process commencing with the orientation of the applicant assessment center, understanding and complying with the physical and administrative requirements, acceptance and processing of submitted documents, facilitation of ocular inspection, issuance of certificate of accreditation, submission of reports and updating the registry.
1.3 Terminology:
The following terms shall mean:
Accreditation – the process of recognizing and/or empowering an entity to perform certain roles and responsibilities on behalf of the TESDA organization.
Accredited Competency Assessment Center (ACAC) - an establishment officially authorized by TESDA to manage the assessment of candidates for national certification.
Accredited Competency Assessor (ACA) - an individual officially authorized by TESDA to assess competencies of candidate for national certification.
Competency Assessment - the process of collecting evidence and making judgments on whether competency has been achieved.
Compliance Audit (CA) - a systematic and documented process for obtaining evidence to determine whether implementation of the PTQCS is compliant with the quality standards.
Competency Standard (CS) – defines the knowledge, skills and
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
attitudes / values required for competent performance in the workplace.
Designated Assessment Venue – an appropriately equipped facility within a company, an organization or a training center/school where actual assessment shall take place.
2.0 Responsibility
2.1 Responsibility for the Authority and Maintenance of the Procedures
The Director General upon the recommendation of the Executive Director of CACO has the responsibility for the maintenance and review of the documented procedures. The National Quality Management and Review Committee will monitor its effectiveness through regular review and reporting on the outcomes by each Regional Quality Management and Review Committee.
2.2 Responsibility for the Implementation of the Accreditation Procedures
The delivery of services is the responsibility of the Provincial Director, in consultation with the Regional Director.
The Executive Director of CACO shall recommend to the Director General related policies and guidelines. Likewise, appeal shall be lodged with the TESDA Provincial and Regional Office and may be further elevated to the Office of the Director General for final decision.
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
3.0 Procedures
3.1 Flow Chart for the accreditation of Assessment Center
ASSESSMENT CENTER
PROVINCIAL /DISTRICT OFFICE
REGIONALOFFICE
CENTRALOFFICE
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
Inquires on Accreditation
Process
Reworks Requirements
Orients Prospective ApplicantsRef 3.2.2
Conducts Ocular InspectionRef 3.2.4
Passed?
NO
YES
NO
YES
Orients Provincial/ District Offices
Ref 3.2.2
Passed??
Complies Discrepancies
Ref 3.2.6
S
Accomplishes Self – Assessment
Checklist
Submits complete
requirements
Evaluates submitted documentsRef. 3.2.3
Updates Provincial/District
RegistryRef. 3.2.8
Confirms Accreditation of Applying Competency
Assessment CenterRef. 3.2.6
Updates RO Registry and Submits report to
CORef. 3.2.9
Ref 3.2.11
Releases Accreditation
CertificateRef.3.2.7
Provides Advocacy Materials to RO
Ref 3.2.1
Updates National Registry
Ref 3.2.10
Accredits Applying Competency
Assessment CenterRef. 3.2.5
3.2 Documentation
3.2.1 CO Provides Advocacy Materials to RO FormsTime
FrameInput to
Procedures
CACO Focal Staff3.2.1.1. Prepares orientation materials 3.2.1.1. Requests TESDA Quality Assurance
Unit (TQAU) to issue Procedures Manual on Accreditation of Competency Assessment Center
Total1 week
3.2.2 RO/PO/DO Conducts Orientation FormsTime
FrameInput to
ProceduresRO Focal Staff
3.2.2.1.Briefs PO/DO Focal Staff on the
following:
Accreditation Procedures
Requirements for accreditation
Responsibilities of accredited competency
assessment center and assessors
Implementing guidelines on accreditation
DO/PO Focal Staff
3.2.2.2. Briefs applying assessment center on
the following:
Requirements for Accreditation Procedures
Implementing guidelines on accreditation
3.2.2.3. Provides the applicant with the following:
Checklist of requirements
Self -Assessment Checklist
AC08/0108AC09/0108
AC08/0108AC09/0108
AC11/0108
Total
1 hour
All RO/PO Focal
Staff shall be
properly oriented
on the accreditation
process.
PO focal shall
prepare Self-
Assessment
Checklist per
Qualification
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
3.2.3 PO/DO Reviews Submitted Documents by CAC
FormsTime
FrameInput to
ProceduresPO/DO Focal Staff
3.2.3.1. Secures the following documents
submitted by the applicant in one
folder/envelope:
Letter of Intent
Copy of SEC Registration
Business permit
BIR Registration
Company Profile
Organizational Structure
Staff Complement and Profile
Building Lay-out/Floor plan/Shop
lay-out
Self-Assessment Checklist
Profiles of In-house Accredited
Competency Assessors
Location Map
3.2.3.1. Checks completeness and authenticity
of the submitted documentary
requirements
3.2.3.2. Affix initials on submitted documents
3.2.3.3. Evaluates the submitted documents
and prepares evaluation report
3.2.3.4. Informs the applying competency
assessment center of the evaluation
results through a letter:
If passed, inform applicant competency
assessment center of the ocular
inspection
If failed, inform applicant competency
assessment center of discrepancies or
lacking requirements for compliance
within 15 working days
Lease of Contract, when applicable
3.2.3.5. Ensures receipt of the notification
letter by the applicant competency
AC10/0108
AC11/0108
Total
1 hour
Submit 3 sets of
documents to
PO/DO. (AO to
bring original
documents for
verification)
PO/DO may
provide technical
assistance to the
Applying
Organization (AO)
in setting-up of
equipment/facilities
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
assessment center.
3.2.3.6. Requests AO to pay to the Cashier the
application fee
Application fee is
50% of accreditation
fee
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
3.2.4 PO/DO Organizes the Conduct of Ocular Inspection
FormsTime
FrameInput to Procedures
PO/DO Focal Staff
3.2.4.1. Organizes Inspection Team to be
composed of the following: 1 RO Focal 1 PO/DO Assessment and
Certification focal 1 sectoral/industry expert
(Team Leader)
3.2.4.2. Requests Inspection Team to conduct ocular inspection
3.2.4.3. Confirms availability of Inspection
Team3.2.4.4. Prepares appointment of the
inspection team
3.2.4.5. Prepares document needed for the conduct of ocular inspection.
3.2.4.6. Furnishes Inspection Team with evaluation report of submitted documents
3.2.4.7. Coordinates transportation and other administrative arrangement necessary for the conduct of the ocular inspection
3.2.4.8. Ensures submission of Inspection report by the Team
3.2.4.8. Requests PO/DO to pay industry representative an honoraria per ocular inspection
AC10/0108 Total 2
hours
Self-assessment
checklist submitted by
the applicant assessment
center shall be used as
the basis for
inspection/confirmation
The PO/DO shall payP1000 honoraria for
industry representative
Inspection Team Leader
3.2.4.9. Provides Evaluation Instrument
to members of Inspection Team
3.2.4.10. Designates member to each
inspection area
3.2.4.11. Consolidates team member
findings
3.2.4.12. Prepares evaluation/inspection
report
3.2.4.13. Ensures that the report is signed
AC10/0108
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
by all members of the Team
3.2.4.14. Discusses findings with the
Center’s authorized
representative
3.2.4.15. Submits report to PD/DD
PO/DO Focal Staff
3.2.4.16. Prepares communication
notifying the AO of result of the
ocular inspection.
3.2.4.17. Transmits communication to
concerned AO
3.2.4.18. Secures acknowledgement
receipt by the AO
2
working
days
3.2.5 PO/DO Accredits CAC FormsTime
FrameInput to Procedures
PO/DO Focal Staff3.2.5.1. Prepares and submits report/
recommendation of the Inspection team to the Provincial/District Director for review and consideration
3.2.5.2. Prepares Certificate of Accreditation of applicant that meets accreditation requirements and submits to the PD/DD for approval
3.2.5.3. Prepares communication to AO if requirements for accreditation were not fully met. Noted deficiencies must be complied with by the applicant.
3.2.5.4. Ensures the following:
The Certificate of Accreditation adopts the approved format
Accreditation Number shall follow the approved numbering system
validity period of accreditation is two (2) years
Qualification nomenclature
AC13/0108
AC13/0108
Re-accreditation of assessment center is not automatic. It shall be based on the results of the compliance audit
Re-accreditation shall follow the same procedure as that of first accreditation including the amount of accreditation fee
1 hour
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
shall be in accordance with the promulgated Training Regulations
3.2.5.5. Prepares memo for the Regional Director recommending confirmation of the accreditation
3.2.5.6. Prepares Affidavit of Undertaking for applicants confirmed by the Regional Director
AC16/0108
3.2.7 RO Confirms Accreditation of Assessment Center
RO Focal Staff
3.2.7.1. Verifies correctness of entries
3.2.7.2. Endorses Accreditation certificate
to Regional Director for signature
3.2.7.3. Records accreditation certificate
3.2.7.4. Transmits approved accreditation
certificate to PO/DO
AC13/0108 30
minutes
3.2.8 PO/DO Releases Certificate of Accreditation to ACAC
FormsTime
FrameInput to Procedures
PO/DO Focal Staff
3.2.8.1. Advises ACAC to pay to the
Cashier the corresponding
accreditation fee either full
Qualification or per cluster of
competencies
3.2.8.2. Acknowledges payment
3.2.8.3. Issues the Certificate of
Accreditation and Affidavit of
Undertaking to ACAC
3.2.8.4. Ensures that the ACAC
president/manager signs the
Affidavit of Undertaking and shall
provide TESDA a photocopy of
the notarized document
3.2.8.5. Issues Certificate of Accreditation
3.2.8.6. Maintains a photocopy of the Certificate of Accreditation and Affidavit of Undertaking
AC13/0108
AC16/0108
Total
1 hourThe application fee
shall be deducted from
the accreditation fee.
TESDA PO/DO shall
accredit the TESDA
Technology Institutions
(TTIs) as TESDA
Assessment Centers,
however, the payment
of accreditation fee is
waived for TESDA
Assessment Centers
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
Note:
The TESDA Assessment Center (TAC)
may designate public or private TVIs with
WTR-training programs registered under
UTPRAS or any company or enterprises as
Assessment Venues (AV) s.
The TAC Manager shall prepare Letter of
Designation to be approved by the TESDA
Provincial/District Director and confirmed
by the school/center administrator or
company supervisor
AC12/0108 The designated
assessment venues
shall be reimbursed
with the cost of
supplies and materials
used during the
assessment.
3.2.9 PO/DO Updates Registry of Accredited Assessment Center
FormsTime
FrameInput to Procedures
PO/DO Focal Staff
3.2.9.1. Prepares Registry of Accredited Competency Assessment Centers (ACACs)
3.2.9.2 Submits report to the PD/DD for
signature
3.2.9.2. Updates Registry and submit to RO thru MONET
AC15/0108 Total
2 hours
3.2.10 RO Updates Registry and Submits Report to CO
FormsTime
FrameInput to Procedures
RO Focal Staff
3.2.10.1. Consolidates reports on Registry
of Accredited Competency
Assessment Centers (ACACs)
3.2.10.2. Submits Updated Registry to CO
thru MONET
AC15/0108 Total
2 hours
3.2.11 CO Updates National Registry Of Accredited Competency Assessment Centers
FormsTime
FrameInput to Procedures
CACO Focal Staff
3.2.11.1. Reviews reports on Accredited
Competency Assessment
AC15/0108 1 week
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
Centers submitted by the ROs
3.2.11.2. Updates national registry
3.2.11.3. Provides CISD copy of updated
registry
3.2.11.4. Checks websites for confirmation
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
3.3. Work Instruction
4.0 Forms
AC08/0108 Checklist of RequirementsAC09/0108 Inspection ReportAC10/0108 Evaluation GuideAC11/0108 Self-Evaluation ChecklistAC12/0108 Letter of DesignationAC13/0108 Certificate of AccreditationAC14/0108 Certificate Numbering and Coding System for Accreditation of
Assessment CenterAC15/0108 Registry of Accredited Assessment CentersAC16/0108 Affidavit of Undertaking
5.0 Related Information
5.1 TESDA Circular #23 series of 2008 on PTQCS Guidelines
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
ACCREDITATION OF COMPETENCY ASSESSMENT CENTERChecklist of Requirements
1. SEC Registration2. Business Permit3. BIR Registration4. Building Layout/Floor Plan5. Location Map6. List of in-house accredited competency assessors7. Complete facilities, tools, equipment and materials appropriate to the
Qualification/s applied for8. Computer system with Internet access9. Organizational structure to support the following activities:
a. Scheduling the conduct of assessmentb. Assigning the accredited competency assessorsc. Collecting assessment feesd. Submitting assessment resultse. Undertaking administrative arrangements with accredited
competency assessors and industry partners
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
ACCREDITATION OF ASSESSMENT CENTERINSPECTION REPORT
Name of Assessment Center-Applicant
Cabucgayan National School of Arts and Trade
Address Brgy. Libertad, Cabucgayan, BiliranContact Person SHERLITA B. ESPOCIA Contact No. 09106297181Title of Qualification Applied for Automotive Servicing NC II
Motorcycle/Small Engine Servicing NC IIShielded Metal Arc Welding NC IIHealth Care Services NC IICaregiving NC IIFood Processing NC IIHousehold Services NC IICommercial Cooking NC IIFood Beverage Servicing NC IIComputer Hardware Servicing NC IIProgramming NC IVDriving NC IIIDriving NC IIRefrigeration and Air-conditioning Servicing NC IIDressmaking NC IITailoring NC IIConsumer Electronic Servicing NC IIElectrical Installation and Maintenance NC IIPlumbing NC II
Date of Inspection May 14, 2011
A. PHYSICAL STRUCTUREItem Quantity Remarks
Required Existing
A.1.1. Accessibility accessible to public transport
A.1.2. Assessment area Minimum area provided to permits ample workplace for candidates
A.2. Lighting and Ventilation
A.2.1. Assessment room or laboratories
lighted at an average of 30-40 ft. candle with minimal tolerance dark spots.
A.2.2. Air conditioning unit optional
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
Form AC 09/0108
A.2.3. Blowers/fans Quantity shall be according to the size of the room
A.3 Auxiliary Room A.3.1. Storeroom Storeroom for
tools, materials
Bins/racks for critical materials
A.3.3. Room for performance assessment
must be able to accommodate at least 10 candidates/ batch;
A.3.4. Chairs and tables
A.3.5. Comfort rooms Clean and functionalSeparate for male and female
Located at convenient part of the building
A.4. Assessment Equipment, Hand tools, Supplies, materials A.4.1. Equipment in accordance
with the list in the Training Regulations/ Assessment Tools of the Qualification/s applied for.
A.4.2. Hand tools
A.4.3. supplies, materials
A.5. Safety Provisions
A.5.1. Medicine cabinet
with first aid kit and other medical paraphernalia
A.5.2. Open floor spaces
entrances and exits are maintained
A.5.3. Work stations, tool panels and equipment
are appropriately grouped to provide ease of movement;
A.5.4. Fire extinguishers Functional
located in conspicuous and highly accessible locations/ places
A.5.5. Equipment lay out Arranged according to sequence of operations to allow maximum use of resources;
A.5.6. Color coded buttons. Strategically installed and located for
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
emergency purposes
B. AdministrativeB.1. Documentary Requirements
1. SEC Registration or equivalent
2. Business Permit
3. BIR Registration
4. Building lay out/ Floor plan5. List of in-house accredited competency assessors (at least 2)
B.2. Communication Facilities 1. Telephone
2. Fax machine3. Computer with peripherals 4. Internet connection
B.3. Staff Complement
B.3.1. Manager B.3.2. Cashier B.3.3. Computer Operator/ Data Encoder B.3.4. Liaison Officer
INSPECTION TEAM
Name RENE G. MALATBALAT Signature Date
Name LYDIO V. VITOR SignatureDate
Name VICTOR D. DUMAGUITSignature Date
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
ASSESSMENT CENTEREVALUATION GUIDE
A. PHYSICAL STRUCTUREA.1. Location and Area A.1.1. The Assessment Center is accessible to public transportation and visibly identifiable from its side of the road. A.1.2. Assessment area permits ample workplace for candidates (minimum area).A.2. Lighting and Ventilation A.2.1. The assessment room or laboratories should be lighted at an average of 30-40 ft. candle with minimal tolerance dark spots. A.2.2. In the absence of an air conditioning unit, all rooms must utilize blowers/fans when natural ventilation is not good because of the physical layout.
A.3 Auxiliary Room The auxiliary room will be marked with “accepted” if the following conditions/ requirements are met: A.3.1. Storeroom is provided for the safekeeping of the tools; A.3.2. Separate storage bins and racks are provided for critical materials, e.g., LPG and other flammable materials; A.3.3. Assessment room for skills must be able to accommodate at least 10 candidates/batch; A.3.4. Chairs and tables; and A.3.5.Clean and functional comfort rooms should be available and located at a convenient part of the building (separate for male and female).
A.4. Assessment Equipment, Hand tools, Supplies, materials A.4.1. Equipment, hand tools, supplies, materials shall be in accordance with the list indicated in the Training Regulations/Assessment Tools of the Qualification applied for.
A.5. Safety Provisions “Accepted” shall be indicated in the appropriate column if the following are
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
met: A.5.1. Medicine cabinet with first aid kit and other medical paraphernalia; A.5.2. Open floor spaces are maintained entrances and exits; A.5.3. Work stations, tool panels and equipment are appropriately grouped to provide ease of movement; A.5.4. Functional fire extinguishers are located in conspicuous and highly accessible locations places; A.5.5. Equipment are laid out according to sequence of operations to allow maximum use of resources; A.5.6. Color coded buttons are installed and located at strategic locations in cases of emergency.
B. AdministrativeB.1. Documentary Requirements B.1.1. SEC Registration or equivalent B.1.2. Business Permit B.1.3. BIR Registration B.1.4. Building lay out/Floor plan B.1.5. List of in-house accredited competency assessors
B.2. Communication Facilities B.2.1. Telephone B.2.2. Fax machine B.2.3. Computer with peripherals B.2.4. Internet connection
B.3. Staff Complement B.3.1. Manager B.3.2. Cashier B.3.3. Computer Operator/Data Encoder B.3.4. Liaison Officer
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
ACCREDITATION OF ASSESSMENT CENTERSELF-ASSESSMENT CHECKLIST
Name of Assessment Center-Applicant
Cabucgayan National School of Arts and Trade
AddressBrgy. Libertad, Cabucgayan, Bilitan
Title of Qualification Applied for Automotive Servicing NC IIMotorcycle/Small Engine Servicing NC IIShielded Metal Arc Welding NC IIHealth Care Services NC IICaregiving NC IIFood Processing NC IIHousehold Services NC IICommercial Cooking NC IIFood Beverage Servicing NC IIComputer Hardware Servicing NC IIProgramming NC IVDriving NC IIIDriving NC IIRefrigeration and Air-conditioning Servicing NC IIDressmaking NC IITailoring NC IIConsumer Electronic Servicing NC IIElectrical Installation and Maintenance NC IIPlumbing
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
Form AC 11/0108
Date Accomplished May 14, 2011
A. PHYSICAL STRUCTUREItem Quantity Remarks
Required Existing
A.1.1. Accessibility accessible to public transport
A.1.2. Assessment area Minimum area provided to permits ample workplace for candidates
A.2. Lighting and Ventilation
A.2.1. Assessment room or laboratories
lighted at an average of 30-40 ft. candle with minimal tolerance dark spots.
A.2.2. Air conditioning unit optional
A.2.3. Blowers/fans Quantity shall be according to the size of the room
A.3 Auxiliary Room A.3.1. Storeroom Storeroom for
tools, materials
Bins/racks for critical materials
A.3.3. Room for performance assessment
must be able to accommodate at least 10 candidates/ batch;
A.3.4. Chairs and tables
A.3.5. Comfort rooms Clean and functionalSeparate for male and female
Located at convenient part of the building
A.4. Assessment Equipment, Hand tools, Supplies, materials A.4.1. Equipment in accordance
with the list in the Training Regulations/ Assessment Tools of the Qualification/s applied for.
A.4.2. Hand tools
A.4.3. Supplies, materials
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
A.5. Safety Provisions
A.5.1. Medicine cabinet
with first aid kit and other medical paraphernalia
A.5.2. Open floor spaces
entrances and exits are maintained
A.5.3. Work stations, tool panels and equipment
are appropriately grouped to provide ease of movement;
A.5.4. Fire extinguishers Functional
located in conspicuous and highly accessible locations/ places
A.5.5. Equipment lay out Arranged according to sequence of operations to allow maximum use of resources;
A.5.6. Color coded buttons. Strategically installed and located for emergency purposes
B. AdministrativeB.1. Documentary Requirements
2. SEC Registration or
equivalent2. Business Permit
3. BIR Registration
3. Building lay out/
Floor plan4. List of in-house accredited competency assessors (at least 2)
B.2. Communication Facilities 1. Telephone
2. Fax machine
5. Computer with peripherals6. Internet connection
B.3. Staff Complement
B.3.1. Manager B.3.2. Cashier B.3.3. Computer Operator/ Data Encoder B.3.4. Liaison Officer
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
Submitted by:
Name: SHERLITA B. ESPOCIA Signature:
Position/Designation: Assessment Center ManagerDate of submission: May 15, 2011
May 16, 2011
SHERLITA B. ESPOCIAAssessment Center ManagerCabucgayan National School of Arts and Trade
Dear Ms. Espocia:
This letter officially designates you as an assessment Center for Automotive Servicing NC II,Motorcycle/Small Engine Servicing NC II, Shielded Metal Arc Welding NC II, Health Care Services NC II, Caregiving NC II, Food Processing NC II, Household Services NC II, Commercial Cooking NC II, Food Beverage Servicing NC II, Computer Hardware Servicing NC II, Programming NC IV, Driving NC III, Driving NC II, Refrigeration and Air-conditioning Servicing NC IIDressmaking NC II, Tailoring NC II, Consumer Electronic Servicing NC II, Electrical Installation and Maintenance NC II, Plumbing And Carpentry NC II.
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
LETTER OF DESIGNATION
Form AC 12/0108
Conduct of assessment shall be governed by rules and regulations based on
PTQCS Guidelines.
We look forward to your acceptance of this agreement.
Sincerely,
PRIMO V. REGIS, JR.ACAC Manager
Conforme: Approved by:
JESSIE A. COLA ROLANDO P. JUANILLO Assessment Venue Manager / Provincial/District Director BSIT Department Head
LETTER OF DESIGNATION
January 9, 2009
FR. MERWIN L. KANGLEONPresidentSaint Thomas Aquinas CollegeSogod, Southern Leyte
Dear Fr. Kangleon:
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
Form AC 12/0108
This letter officially designates you as an assessment venue for PC Operations
NC II, Caregiving NC II & Health Care Services NC II. Conduct of assessment
shall be governed by rules and regulations based on PTQCS Guidelines.
We look forward to your acceptance of this agreement.
Sincerely,
PRIMO V. REGIS, JR. ACAC Manager
Conforme: Approved by:
RITO MANGYAO ROLANDO P. JUANILLOAssessment Venue Manager Provincial/District Director
LETTER OF DESIGNATION
January 9, 2009
MR. MANUEL RENE D. COROLLOExecutive Training DirectorSJC Vocational Training CenterMaasin City
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
Form AC 12/0108
Dear Mr. Corollo:
This letter officially designates you as an assessment venue for Automotive
Servicing NC II, Building Wiring Installation NC II, RAC Servicing NC I, Consumer
Electronics Servicing NC II, Driving NC II, SMAW NC II and Plumbing NC II.
Conduct of assessment shall be governed by rules and regulations based on
PTQCS Guidelines.
We look forward to your acceptance of this agreement.
Sincerely,
PRIMO V. REGIS, JR.ACAC Manager
Conforme: Approved by:
MR. MANUEL RENE D. COROLLO ROLANDO P. JUANILLOAssessment Venue Manager/ Provincial/District Director Executive Training Center
LETTER OF DESIGNATION
January 9, 2009
MR. LEANDRO T. JARABE, JR.PresidentSouthern Leyte Business College
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
Form AC 12/0108
Dear Mr. Jarabe:
This letter officially designates you as an assessment venue for Computer
Hardware Servicing NC II. Conduct of assessment shall be governed by rules
and regulations based on PTQCS Guidelines.
We look forward to your acceptance of this agreement.
Sincerely,
PRIMO V. REGIS, JR.ACAC Manager
Conforme: Approved by:
LEONIDES JESS G. ROSALIA ROLANDO P. JUANILLOAssessment Venue Manager Provincial/District Director
LETTER OF DESIGNATION
January 9, 2009
VALERIO B. CABALO, Ph.D.Campus AdministratorHinunangan SLSU Campus
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
Form AC 12/0108
Hinunangan, Southern Leyte
Dear Dr. Cabalo:
This letter officially designates you as an assessment venue for PC Operation
NC II. Conduct of assessment shall be governed by rules and regulations based
on PTQCS Guidelines.
We look forward to your acceptance of this agreement.
Sincerely,
PRIMO V. REGIS, JR.ACAC Manager
Conforme: Approved by:
MADELYN BUCTOT ROLANDO P. JUANILLOAssessment Venue Manager Provincial/District Director
LETTER OF DESIGNATION
January 9, 2009
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
Form AC 12/0108
MR. SIXTO B. EVALDEZCampus AdministratorSan Juan SLSU CampusSan Juan, Southern Leyte
Dear Mr. Evaldez:
This letter officially designates you as an assessment venue for PC Operations
NC II & Building Wiring Installation NC II. Conduct of assessment shall be
governed by rules and regulations based on PTQCS Guidelines.
We look forward to your acceptance of this agreement.
Sincerely,
PRIMO V. REGIS, JR.ACAC Manager
Conforme: Approved by:
EDEN GARCES ROLANDO P. JUANILLOAssessment Venue Manager Provincial/District Director
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
Form AC 12/0108
LETTER OF DESIGNATION
January 9, 2009
MIGUEL T. UDTOHAN, Ph.D.PresidentThe college of MaasinMaasin City
Dear Dr. Udtohan:
This letter officially designates you as an assessment venue for Commercial
Cokking NC II, Baking & Pastry Production NC II, Food & Beverage Services NC
II, PC Operation NC II & Bartending NC II. Conduct of assessment shall be
governed by rules and regulations based on PTQCS Guidelines.
We look forward to your acceptance of this agreement.
Sincerely,
PRIMO V. REGIS, JR.ACAC Manager
Conforme: Approved by:
REGEAN U. ELLORIMO ROLANDO P. JUANILLOAssessment Venue Manager Provincial/District Director
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
Form AC 12/0108
LETTER OF DESIGNATION
January 9, 2009
MOST REV. PRECIOSO D. CANTILLAS, SDB, DD
President
Saint Joseph College
Maasin City
Dear Bishop Cantillas:
This letter officially designates you as an assessment venue for PC Operations
NC II, Computer Hardware Servicing NC II, Household Services NC II, Security
Services NC II & Health Care Services NC II. Conduct of assessment shall be
governed by rules and regulations based on PTQCS Guidelines.
We look forward to your acceptance of this agreement.
Sincerely,
PRIMO V. REGIS, JR.ACAC Manager
Conforme: Approved by:
LAMIRA MIRAS ROLANDO P. JUANILLOAssessment Venue Manager Provincial/District Director
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
Form AC 12/0108
LETTER OF DESIGNATION
January 9, 2009
HON. RICARDO E. BORCESSchool AdministratorSaint James College of Padre BurgosP. Burgos, So., Leyte
Dear Hon. Borces:
This letter officially designates you as an assessment venue for PC Operations
NC II and Computer Hardware Servicing NC II. Conduct of assessment shall be
governed by rules and regulations based on PTQCS Guidelines.
We look forward to your acceptance of this agreement.
Sincerely,
PRIMO V. REGIS, JR.ACAC Manager
Conforme: Approved by:
VICTOR D. DUMAGUIT ROLANDO P. JUANILLOAssessment Venue Manager Provincial/District Director
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
LETTER OF DESIGNATION
January 9, 2009
PROSE IVY G. YEPES, MAEDCampus AdministratorSLSU Tomas Oppus CampusT. Oppus, Southern Leyte
Dear Dr. Yepes:
This letter officially designates you as an assessment venue for PC Operations
NC II. Conduct of assessment shall be governed by rules and regulations based
on PTQCS Guidelines.
We look forward to your acceptance of this agreement.
Sincerely,
PRIMO V. REGIS, JR.ACAC Manager
Conforme: Approved by:
FRANCIS ANN SY ROLANDO P. JUANILLOAssessment Venue Manager Provincial/District Director
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
Form AC 12/0108
LETTER OF DESIGNATION
January 9, 2009
HON. NESTOR M. SYPresidentSystems Technology InstituteMaasin City
Dear Hon. Sy:
This letter officially designates you as an assessment venue for PC Operations
NC II, Computer Hardware Servicing, Commercial Cooking NC II and Food &
Beverage Services NC II. Conduct of assessment shall be governed by rules and
regulations based on PTQCS Guidelines.
We look forward to your acceptance of this agreement.
Sincerely,
PRIMO V. REGIS, JR.ACAC Manager
Conforme: Approved by:
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
Form AC 12/0108
HILARIO MOBE ROLANDO P. JUANILLOAssessment Venue Manager Provincial/District Director
LETTER OF DESIGNATION
January 9, 2009
ROSARIO L. PAULO, DPASchool AdministratorSLSU Bontoc CampusBontoc, So. Leyte
Dear Dr. Paulo:
This letter officially designates you as an assessment venue for PC Operations
NC II, Food Processing NC II and Health Care Services NC II. Conduct of
assessment shall be governed by rules and regulations based on PTQCS
Guidelines.
We look forward to your acceptance of this agreement.
Sincerely,
PRIMO V. REGIS, JR.ACAC Manager
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
Form AC 12/0108
Conforme: Approved by:
MARIA EMELEE BASCUG ROLANDO P. JUANILLOAssessment Venue Manager Provincial/District Director
LETTER OF DESIGNATION
January 9, 2009
WENIFREDO A. BALIADProprietor/ManagerWAB Welding ShopSan Isidro, Sogod, So. Leyte
Dear Mr. Baliad:
This letter officially designates you as an assessment venue for Shielded Metal
Arc Welding NC II. Conduct of assessment shall be governed by rules and
regulations based on PTQCS Guidelines.
We look forward to your acceptance of this agreement.
Sincerely,
PRIMO V. REGIS, JR.
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
Form AC 12/0108
ACAC Manager
Conforme: Approved by:
WENIFREDO A. BALIAD ROLANDO P. JUANILLOAssessment Venue Manager Provincial/District Director
Form AC 13/0108
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
TECHNICAL EDUCATION AND SKILLS DEVELOPMENT AUTHORITY
CERTIFICATE OF ACCREDITATION
This is to certify that
CABUCGAYAN NATIONAL SCHOOL OF ARTS AND TRADES
is an Accredited Competency Assessment Center for
ELECTRICAL INSTALLATION AND MAINTENANCE NC II
Accreditation No. AC-EIM0208061113101
Date Accredited: June 3, 2011 Expiration Date: June 3, 2013
Approved by: ROLANDO P. JUANILLO Provincial Director-TESDA So. Leyte
Confirmed by: JUAN M. SABULAO, JR. Regional Director-TESDA VIII
Certificate Numbering and Coding System – Competency Assessment Center
Competency Assessment Center
1. Accreditation number shall be assigned and issued to every accredited competency assessment center.
2. Accreditation number shall be assigned/issued consecutively on a first come, first served basis.
Example : Assessment Center- Automotive Servicing NC II
Accreditation No. AC-ATS0205010810101
AC ATS 02 05 01 08 10 101
*Assessment Center CODE
1st center accredited ------------------------ 1012nd ------------------------ 1023rd ------------------------- 1034th ------------------------- 1045th ------------------------- 105 and so on…
REGION CODE REGION CODEI 01 IX 09II 02 X 10III 03 XI 11
IVA 04 XII 12IVB 17 NCR 13V 05 CAR 15VI 06 CARAGA 33VII 07 ARMM 34VIII 08
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
Number Series*
Expiration Year
Accreditation YearQualification Level
A ssessment Center Acronym
Qualification Alpha Code
Region Code Province Code
Form AC 14/0108
REGION and PROVINCE CODES
Region I Code: 01 Region VI Code: 06Province Code Province Code
1. Ilocos Norte 01 1. Aklan 012. Ilocos Sur 02 2. Antique 023. La Union 03 3. Capiz 034. Pangasinan 04 4. Iloilo 04
5. Guimaras 056. Negros Occidental 06
Region II Code: 02 Region VII Code: 07Province Code Province Code
1. Batanes 01 1. Bohol 012. Cagayan 02 2. Cebu 023. Isabela 03 3. Negros Oriental 034. Nueva Vizcaya 04 4. Siquijor 045. Quirino 05
Region III Code: 03 Region VIII Code: 08Province Code Province Code
1. Aurora 01 1. Biliran 012. Bataan 02 2. Eastern Samar 023. Bulacan 03 3. Leyte 034. Nueva Ecija 04 4. Northern Samar 045. Pampanga 05 5. Samar 056. Tarlac 06 6. Southern Samar 067. Zambales 07
Region IX Code: 09Region IVA Code: 04 Province Code
Province Code 1. Zamboanga Sibugay 011. Batangas 01 2. Zamboanga del Norte 022. Cavite 02 3. Zamboanga del Sur 033. Laguna 034. Quezon 04 Region X Code: 105. Rizal 05 Province Code
1. Bukidnon 01Region IVB Code: 17 2. Camiguin 02
Province Code 3. Misamis Occidental 031. Marinduque 01 4. Misamis Oriental 042. Mindoro Occidental 02 5. Lanao del Norte 053. Mindoro Oriental 034. Palawan 04 Region XI Code: 115. Romblon 05 Province
1. Davao del Norte 01Region V Code: 05 2. Davao del Sur 02Province Code 3. Davao Oriental 03
1. Albay 01 4. Compostela Valley 04
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
2. Camarines Norte 023. Camarines Sur 03 Region XII Code: 124. Catanduanes 04 Province Code5. Masbate 05 1. South Cotabato 016. Sorsogon 06 2. North Cotabato 02
3. Sultan Kudarat 034. Saranggani 04
Region NCR Code: 13 Region CARAGA Code: 33District Code Province Code
1. Caloocan 01 1. Agusan del Norte 012. Las Piñas 02 2. Agusan del Sur 023. Makati 03 3. Surigao del Norte 034. Malabon 04 4. Surigao del Sur 045. Mandaluyong 05 5. Dinagat Islands 056. Manila 067. Marikina 078. Muntinlupa 08 Region ARMM Code: 349. Navotas 09 Province Code10. Parañaque 10 1. Basilan 0111. Pasay 11 2. Lanao del Sur 0212. Pasig 12 3. Maguindanao 0313. Pateros 13 4. Sulu 0414. Quezon City 14 5. Tawi-tawi 0515. San Juan 15 6. Shariff Kabunsuan 0616. Taguig 1617. Valenzuela 17
Region CAR Code: 15Province Code
1. Abra 012. Apayao 023. Benguet 034. Ifugao 045. Kalinga 056. Mt. Province 06
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
QUALIFICATION CODING SYSTEM
SECTORSectoral
Code QUALIFICATION TITLE
Qualifica- tion Alpha
Code
Qualifica-tion
Level
Year Promulga-
tedQUALIFICATION
CODE
Agri-Fishery AGR
1 Animal Production ANP II 2004 AGRANP2042 Aquaculture AQC II 2004 AGRAQC2043 Horticulture HTC II 2004 AGRHTC204
4Agricultural Crop Production ACP I 2005 AGRACP105
5Agricultural Crop Production ACP III 2006 AGRACP306
6 Horticulture HTC III 2006 AGRHTC3067 Fish Capture FSC I 2005 AGRFSC1058 Fish Capture FSC II 2006 AGRFSC206
Process Food & Beverages PFB 9 Food Processing FOP II 2005 PFBFOP205
10 Slaughtering Operation SLO II 2006 PFBSLO206
Garments GRM 11 Dressmaking DRM II 2005 GRMDRM20512 Tailoring TLR II 2005 GRMTLR205
Footwear & Leathergoods FWR
13 Footwear Making FWM II 2004 FWRFWM204
Maritime MTM
14 Deck Seafaring DCK I 2006 MTMDCK10615 Deck Seafaring DCK II 2005 MTMDCK20516 Deck Seafaring DCK III 2006 MTMDCK30617 Engine Seafaring ENR I 2006 MTMENR10618 Engine Seafaring ENR II 2005 MTMENR20519 Engine Seafaring ENR III 2006 MTMENR306
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
Pyrotechnic Manufacturing PYR 20 Pyrotechnics PYT II 2005 PYRPYT205
Metals & Engineering
MEE 21 Machining MCG I 2006 MEEMCG10622 Machining MCG II 2005 MEEMCG20523 Machining MCG III 2006 MEEMCG306
24Shielded Metal Arc Welding EAW I 2006 MEEEAW106
25Shielded Metal Arc Welding EAW II 2006 MEEEAW206
26Shielded Metal Arc Welding EAW III 2006 MEEEAW306
27 Shielded Metal Arc Welding EAW IV 2006 MEEEAW40628 Gas Metal Arc Welding MIG I 2006 MEEMIG10629 Gas Metal Arc Welding MIG II 2006 MEEMIG20630 Gas Metal Arc Welding MIG III 2006 MEEMIG30631 Fluxed Cord Arc Welding FCW I 2006 MEEFCW10632 Fluxed Cord Arc Welding FCW II 2006 MEEFCW20633 Fluxed Cord Arc Welding FCW III 2006 MEEFCW306
34 Gas Tungsten Arc Welding TIG II 2006 MEETIG206
35 Gas Tungsten Arc Welding TIG IV 2006 MEETIG40636 Submerged Arc Welding SAW I 2006 MEESAW10637 Submerged Arc Welding SAW II 2006 MEESAW20638 Gas Welding GSW I 2006 MEEGSW10639 Gas Welding GSW II 2006 MEEGSW206
Information & Communication Technology
ICT 40 Contact Center Services (version 2) CCS II 2006 ICTCCS206
41 Medical Transcription (version 2) MDT II 2006 ICTMDT206
42 Computer Hardware Servicing CHS II 2005 ICTCHS205
43 Animation ANM III 2005 ICTANM305
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
44 Programming PRG IV 2005 ICTPRG40545 PC Operations PCO II 2005 ICTPCO205
Electronics ELC 46 Consumer Electronics Servicing CES II 2006 ELCCES206
47 Consumer Electronics Servicing CES III 2006 ELCCES306
48 Consumer Electronics Servicing CES IV 2006 ELCCES406
49 Instrumentation & Control Servicing ICS II 2006 ELCICS206
50 Instrumentation & Control Servicing ICS III 2006 ELCICS306
51 Instrumentation & Control Servicing ICS IV 2006 ELCICS406
52 Mechatronics Servicing MEC II 2006 ELCMEC20653 Mechatronics Servicing MEC III 2006 ELCMEC30654 Mechatronics Servicing MEC IV 2006 ELCMEC406
Construction (includes: Civil Works, Plumbing, Electrical and Heavy Equipment)
CON 55 Building Wiring Installation BWI II 2005 CONBWI20556 Masonry MAS I 2006 CONMAS10657 Masonry MAS II 2005 CONMAS20558 Masonry MAS III 2006 CONMAS30659 Plumbing PLM I 2006 CONPLM10660 Plumbing PLM II 2005 CONPLM20561 Plumbing PLM III 2006 CONPLM30662 Painting COP II 2006 CONCOP20663 Painting COP III 2006 CONCOP30664 Carpentry ROC II 2005 CONROC20565 Carpentry FIC III 2006 CONFIC30666 Heavy Equipment
Operation HEO II 2004 CONHEO20467 Heavy Equipment Servicing
(Mechanical) HEM II 2006 CONHEM206
Heating, Ventilating & Air-conditioning / Refrigeration
HVC68 RAC Servicing (Window
type/ Domestic Refrigeration) WAC I 2005 HVCWAC105
69RAC Servicing(PACU/CRE) WAC II 2004 HVCWAC204
70 Transport RAC Servicing TAC II 2005 HVCTAC20571 Air Duct Servicing ADS II 2006 HVCADS20672 Ice Plant Refrigeration
Servicing IPR III 2006 HVCIPR306
Automotive & Land Transport ALT 73 Automotive Servicing ATS I 2006 ALTATS106
74 Automotive Servicing ATS II 2004 ALTATS204
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
75 Automotive Servicing ATS III 2006 ALTATS30676 Automotive Servicing ATS IV 2006 ALTATS40677 Auto Engine Rebuilding AER II 2004 ALTAER20478 Auto Body Repairing ABR II 2004 ALTABR20479 Motorcycle/Small Engine
Servicing MSE II 2004 ALTMSE20480 Auto Body
Painting/Finishing ABP I 2006 ALTABP10681 Auto Body
Painting/Finishing ABP II 2004 ALTABP20482 Auto Body
Painting/Finishing ABP III 2006 ALTABP30683 Driving DRV II 2004 ALTDRV20484 Driving DRV III 2005 ALTDRV305
Tourism TRS 85 Bartending BAR II 2005 TRSBAR20586 Commercial Cooking COK II 2005 TRSCOK20587 Food & Beverage Services FBS II 2005 TRSFBS20588 Housekeeping HSK II 2005 TRSHSK20589 Tour Guiding Service TGD II 2005 TRSTGD20590 Travel Services TVS II 2005 TRSTVS20591 Front Office Services FOS II 2005 TRSFOS20592 Baking/Pastry Production BPP II 2005 TRSBPP205
Health, Social & Other Community Services
HCS 93 Caregiving CGV II 2004 HCSCGV20494 Security Service SES I 2005 HCSSES10595 Security Service SES II 2004 HCSSES20496 Household Services HHS II 2005 HCSHHS20597 Health Care Services HCS II 2005 HCSHCS20598 Performing Arts (Dance) PAD II 2005 HCSPAD20599 Performing Arts (Song) PAS II 2005 HCSPAS205
100 Hairdressing HDR II 2005 HCSHDR205101 Hairdressing HDR III 2005 HCSHDR305102 Beauty Care BEC II 2005 HCSBEC205103 Beauty Care BEC III 2005 HCSBEC305104 Biomedical Equipment
Service BES II 2006 HCSBES206105 Emergency Medical
Services EMS II 2006 HCSEMS206106 Massage Therapy MAT II 2006 HCSMAT206107 Barangay Health Services BHS II 2006 HCSBHS206
Media MDA Cable Television Installation CTV II
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Issued by : CACO
TECHNICAL EDUCATION AND SKILLS DEVELOPMENT AUTHORITYRegistry of Accredited Competency Assessment Centers
For the Month of August 2011
Region Assessment Center
Address Center Manager Contact Number
Qualification Title Level Accreditation
Number Date
AccreditedExpiration
Date
VIII
Cabucgayan National School
of Arts and Trades
Brgy. Libertad, Cabucgayan, Biliran
SHERLITA B. ESPOCIA
(053) 5029048
(053) 502-9050
Automotive Servicing
IIAC-
AMS0208061113101
August 1, 2011
August 1, 2013
Motorcycle/Small Engine Servicing
IIAC-
MSE0208061113101
August 1, 2011
August 1, 2013
Shielded Metal Arc Welding II
AC-AC0208061113101
August 1, 2011
August 1, 2013
Bartending NC II
II AC-BAR0208061113101
August 1, 2011
August 1, 2013
Food Processing II
AC-FOP0208061113101
August 1, 2011
August 1, 2013
Household Services II
AC-HHS0208061113101
August 1, 2011
August 1, 2013
Commercial Cooking II
AC-COK0208061113101
August 1, 2011
August 1, 2013
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Page 17 of 20
Issued by : CACO Date: 1/15/10
Form AC 15/0108
Food and Beverage Servicing
IIAC-
FBS0208061113101
August 1, 2011
August 1, 2013
Electrical Installation and Maintenance
II AC-EIM020806
1113101
August 1, 2011
August 1, 2013
Computer Hardware Servicing
II AC-CHS0208061113101
August 1, 2011
August 1, 2013
Driving II AC-DRV0208061113101
August 1, 2011
August 1, 2013
PlumbingII
AC-PLM0208061113101
August 1, 2011
August 1, 2013
Massage Therapy II
AC-MAT0208061113101
August 1, 2011
August 1, 2013
Prepared by:
LYDIO V. VITOR
Approved by:
ROLANDO P. JAUNILLO
Noted by:
JUAN M. SABULAO, JR.
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Page 17 of 20
Issued by : CACO Date: 1/15/10
PROCEDURES MANUALCompetency Assessment and Certification Program (Regular)
Accreditation of Competency Assessment Centers
Document No. TESDA-SOP-05
Rev. No. 1
Page 17 of 20
Issued by : CACO Date: 1/15/10
Republic of the Philippines)In the City of ___________)s.s.
AFFIDAVIT OF UNDERTAKING(Assessment Center)
Cabucgayan National School of Arts and Trades , represented by its President, Lino B. Severino with business address at Brgy. Libertad, Cabucgayan, Biliran after having been sworn to in accordance with law do hereby depose and state that:
The Competency Assessment Center shall comply with the following terms and conditions, violations of any of those mentioned below shall be ground for the suspension/ cancellation/ withdrawal of accreditation:
1. Provide quality assessment for Automotive Servicing NC II, Motorcycle/Small Engine
Servicing NC II, Shielded Metal Arc Welding NC II, Food Processing NC II, Household
Services NC II, Commercial Cooking NC II, Food and Beverage Services NC II,
Computer Hardware Servicing NC II, Driving NC II, Electrical Installation and
Maintenance NC II, Bartending NC II, Massage Therapy NC II and Plumbing NC II.
2. Maintain facilities of the assessment center as prescribed by TESDA;
3. Recognize assessment venues in qualifications where demand is needed.
4. Collect competency assessment fee prescribed by TESDA.
5. Conduct competency assessment strictly in accordance with the provisions on the
PTQCS Guidelines and Procedure Manual on Competency Assessment;
6. Collect competency assessment fees prescribed by TESDA;
7. Sustain compliance with accreditation requirements;
8. Notify TESDA of any change that directly or indirectly affect assessment conditions in
relation to the conditions existing during the original accreditation;
9. Safeguard/ Ensure the authenticity, validity and confidentiality of all documents relative
to the conduct of competency assessment;
10. Assume full responsibility for ensuring the objectivity and integrity of assessment
conducted in the Assessment Center and by the Competency Assessor;
11. Submit and post assessment results and reports immediately after the conduct of
assessment; and
12. Install a quality assured system within one year upon issuance of certificate of
accreditation.
IN WITNESS WHEREOF, I have hereunto affixed my signature this _______ day of
_____________, 20 ______ in the City of ____________________________________,
Philippines.
LINO R. SEVERINO
Affiant
SUBSCRIBED AND SWORN to before me, this _____ day of __________________, in the
______________, Philippines. Affiant exhibited to me his/her Community Tax Certificate No.
05058357 issued on January 7, 2011 at Cabucgayan, Biliran.
NOTARY PUBLIC
Doc. No. : __________Page No.: __________Book No.: __________Series No.:_________
TESDAQA
SYSTEM
Accreditation of Competency Assessment Centers Assessment and Certification Program
Document No. TESDA SOP-05
Issued by: CACO Date: 01/15/10
Revision: 01 Page 19 OF 20
Form AC 16/0108