STER
EOLITH
OGRAPH
Y Accura® 25 Plastic
Simulate the properties and aesthetics of polypropylene and ABSwith this accurate and flexible material.
Accura® 25 Plastic produces durable prototypes that are ideally suited for automotive design
verification and functional testing.
Applications• Functional components for assemblies and mock-ups for: · Automotive styling parts — trim, fascia, and other components · Consumer electronic components · Toys · Snap fit assemblies• Master patterns for RTV/silicone molding• Replace CNC machining of polypropylene and ABS to produce short-run plastic parts• Simulate injection molded parts• Concept and marketing models
Features
Benefits
• Look and feel of molded polypropylene• High flexibility with excellent shape retention• Outstanding feature resolution and accuracy• High production speed• Fully developed and tested build styles
• Increased market opportunities for models• Reliable and robust functional prototypes• Suitable for master patterns• More parts and better system utilization• Maximize reliability with no user R&D
Accura® 25 Plastic has high flexibility, while retaining the original shape.
Automotive styling part.
Liquid Material
Appearance White
Liquid Density @ 25 °C (77 °F) 1.13 g/cm³
Solid Density @ 25 °C (77 °F) 1.19 g/cm³
Viscosity @ 30 °C (86 °F) 250 cps
Penetration Depth (Dp)* 4.2 mils
Critical Exposure(Ec)* 10.5 mJ/cm2
Tested Build Styles EXACT™, FAST™, EXACT™ HR
STER
EOLITH
OGRAPH
Y
For use with solid-state stereolithography (SLA®) Systems
Technical Data
Post-Cured Material
Tensile Strength ASTM D 638 38 MPa 5,540 - 5,570 PSI
Tensile Modulus ASTM D 638 1590-1660 MPa 230 - 240 KSI
Elongation at Break (%) ASTM D 638 13 - 20 % 13 - 20 %
Flexural Strength ASTM D 790 55 - 58 MPa 7,960 - 8,410 PSI
Flexural Modulus ASTM D 790 1,380 - 1,660 MPa 200 - 240 KSI
Impact Strength (Notched Izod) ASTM D 256 19 - 24 J/m 0.4 ft-lb/in
Heat Deflection Temperature ASTM D 648@ 66 PSI
@ 264 PSI58 - 63 °C51 - 55 °C
136 - 145 °F124 - 131 °F
Hardness, Shore D 80 80
Co-Effcient of Thermal Expansion ASTM E 831-93 TMA (T<Tg, 0-20 °C) 107 x 10-⁶ m/m-°C TMA (T<Tg, 75-140 °C) 151 x 10-⁶ m/m-°C
Glass Transition (Tg) DMA, E” 60 °C 140 °F
3D Systems Corporation Tel: +1 803.326.4080 [email protected] Three D Systems Circle Toll-free: 800.889.2964 www.3dsystems.comRock Hill, SC 29730 U.S.A. Fax: +1 803.324.8810 NASDAQ: TDSC
Warranty/Disclaimer: The performance characteristics of these products may vary according to product application, operating conditions, material combined with, or with end use. 3D Systems makes no warranties of any type, express or implied, including, but not limited to, the warranties of merchantability or fitness for a particular use.© 2008 by 3D Systems, Inc. All rights reserved. Specifications subject to change without notice. EXACT and FAST are trademarks, and the 3D logo, Accura and SLA are registered trademarks of 3D Systems, Inc.
PN 70668 Issue Date - April 08
“Accura® 25 simulates the properties
of a durable plastic in the range of
polypropylene to low end ABS. The
combination of its mechanical prop-
erties and its visual similarity to an
injection molded plastic has led many
of our customers to adopt Accura® 25
as their choice material for all models,
unless otherwise specified. We have
used it for customer applications
ranging from durable enclosures and
snap fit assemblies, to replacement
parts for CNC machined delrin®. We
have even had a few clients success-
fully use Accura® 25 parts as their
production material for low volume
applications. The properties and
aesthetics make Accura® 25 the go-to
resin for almost any application.”
Todd Reese, President Realize Inc.
Accura® 25 Plastic
Measurement Condition Metric U.S.
Measurement Condition Value
* Dp/Ec values are the same on all systems.
TM
STER
EOLITH
OGRAPH
Y Accura® 55 Plastic
Simulate the look and feel of molded ABS with this tough and versatile plastic.
Cordless drill prototype for future assembly testing.
Applications• Automotive interior components
• Short-run production parts
• Electronic components
• Testing of functional assemblies
• Rigid and durable functional proto types
• Concept and marketing models
• Accurate, durable master patterns for urethane casting
Features
Benefits
• Durable and rigid material
• Look and feel of molded ABS
• High accuracy with less distortion
• High production speed
• Low viscosity formulation
• Fully developed and tested build styles
• Produce ABS-like parts without molding or machining• Increase market opportunities and acceptance for models • Parts produced within tolerance and faithful to CAD data• Increase system throughput• Minimize part cleaning and finish ing labor• Maximize reliability with no user R&D
Automotive door component.
Spa water jet prototypes.
Liquid Material
Appearance White
Liquid Density @ 25 °C (77 °F) 1.13 g/cm³
Solid Density @ 25 °C (77 °F) 1.20 g/cm³
Viscosity @ 30 °C (86 °F) 155 - 185 cps
Penetration Depth (Dp)* 5.2 mils
Critical Exposure(Ec)* 7.4 mJ/cm²
Tested Build Styles EXACT™, FAST™, EXACT™ HR
STER
EOLITH
OGRAPH
Y
For use with solid-state stereolithography (SLA®) Systems
Technical Data
Post-Cured Material
Tensile Strength ASTM D 638 63 - 68 MPa 9,200 - 9,850 PSI
Tensile Modulus ASTM D 638 3,200 - 3,380 MPa 460 - 490 KSI
Elongation at Break (%) ASTM D 638 5 - 8 % 5 - 8 %
Flexural Strength ASTM D 790 88 - 110 MPa 12,830 -15,920 PSI
Flexural Modulus ASTM D 790 2,690 - 3,240 MPa 390 - 470 KSI
Impact Strength (Notched Izod) ASTM D 256 12 - 22 J/m 0.2 - 0.4 ft-lb/in
Impact Strength (Notched Izod) ASTM D 5420 1.1 J 0.81 ft - lbs
Heat Deflection Temperature ASTM D 648@ 66 PSI
@ 264 PSI55 - 58 °C51 - 53 °C
131 - 136 °F123 - 127 °F
Hardness, Shore D 85 85
Co-Effcient of Thermal Expansion ASTM E 831-93TMA (T<Tg, 0-40 °C)
TMA (T<Tg, 75-140 °C)61 x µm/m -°C163 µm/m -°C
141 µin/in - °F326 µin/in - °F
Glass Transition (Tg) DMA, E” 56 °C 132°F
3D Systems Corporation Tel: +1 803.326.4080 [email protected] Three D Systems Circle Toll-free: 800.889.2964 www.3dsystems.comRock Hill, SC 29730 U.S.A. Fax: +1 803.324.8810 NASDAQ: TDSC
Warranty/Disclaimer: The performance characteristics of these products may vary according to product application, operating conditions, material combined with, or with end use. 3D Systems makes no warranties of any type, express or implied, including, but not limited to, the warranties of merchantability or fitness for a particular use.© 2008 by 3D Systems, Inc. All rights reserved. Specifications subject to change without notice. EXACT and FAST are trademarks, and the 3D logo, Accura and SLA are registered trademarks of 3D Systems, Inc.
PN 70717 Issue Date - April 08
“Accura® 55 has proven to be an
excellent resin for Harvest. Its low
viscosity allows us to clean and finish
parts more easily. Couple that with a
high build success rate and the result
is greater production efficiency and
higher quality parts. Additionally,
the mechanical properties allow the
models to serve as functional proto-
types that better meet the needs of our
customers.”
Jason Morgan, Stereolithography
Production ManagerHarvest Technologies
Accura® 55 Plastic
Measurement Condition Metric U.S.
Measurement Condition Value
* Dp/Ec values are the same on all solid-state laser SLA® Systems.
Durable and rigid testing.
Look and feel of molded ABS.
TM
STER
EOLITH
OGRAPH
Y Accura® ClearVue™ Material
Applications Benefits• Thehighestclarityandtransparency
• Durableandstrong
• Humidityandmoisturestable
• USPclassVIcapable
• Generalpurposeprototyping
• Modelsrequiringhighclarity
• Headlampsandlenses
• Fluidflowandvisualizationmodels
• Transparentassemblies
• Snapfitsandcomplexassemblies
• Medicalmodelsandmedicaldevices
Simulate the properties and appearance of Polycarbonate and ABS with this durable clear plastic.
Liquid Material
Appearance Clear/Transparent
LiquidDensity @25°C(77°F) 1.1g/cm3at25°C
SolidDensity @25°C(77°F) 1.17g/cm3at25°C
Viscosity @30°C(86°F) 235-260cps
PenetrationDepth(Dp) 6.1mils
CriticalExposure(Ec) 9.5mJ/cm2
STER
EOLITH
OGRAPH
Y
Forusewithsolid-statestereolithography(SLA®)Systems
TechnicalData
Post-Cured Material
TensileStrength ASTMD638 46-53MPa 6,700-7,700PSI
TensileModulus ASTMD638 2,270-2,640MPa 329-383KSI
ElongationatBreak(%) ASTMD638 3-15% 3-15%
FlexuralStrength ASTMD790 72-84MPa 10,400-12,200PSI
FlexuralModulus ASTMD790 1,980-2,310MPa 287-335KSI
ImpactStrength(IzodNotched) ASTMD256 40-58J/m 0.70-1.1ft-lb/in
HeatDeflectionTemperature ASTMD648@66PSI@264PSI
51°C50°C
124°F122°F
Hardness,ShoreD 80 80
Co-efficientofThermalExpansion ASTME831-9325-50°C50-100°C
122μm/m-°C155μm/m-°C
68μin/in-°F86μin/in-°F
GlassTransition(Tg) DMA,E” 62°C 144°F
WaterAbsorption ASTMD570-98 0.3% 0.3%
3DSystemsCorporation Tel:+1803.326.4080 [email protected] Toll-free:800.889.2964 www.3dsystems.comRockHill,SC29730U.S.A. Fax:+1803.324.8810 NYSE:DDD
Warranty/Disclaimer:The performance characteristics of these productsmay vary according to product application, operating conditions, orwith end use.3DSystemsmakesnowarrantiesofanytype,expressorimplied,including,butnotlimitedto,thewarrantiesofmerchantabilityorfitnessforaparticularuse.©2011by3DSystems,Inc.Allrightsreserved.Specificationssubjecttochangewithoutnotice.ClearVue,iProandthe3DlogoaretrademarksandAccura,ViperandSLAareregisteredtrademarksof3DSystems,Inc.
PN70740IssueDate-Nov2011
Accura® ClearVue™ Material
Measurement Condition Metric U.S.
Measurement Condition Value
TM
Ultra tough white plastic to replace CNC Machined polypropylene and ABS articles
• Exceptionallytoughanddurable
• Resistsbreakageandhandles challengingfunctionalassemblies
• Greatforsnapfits,assembliesanddemanding applications
• Idealformasterpatternsforvacuumcasting
Accura® Xtreme™ White 200 Plastic
Technical DataPost-Cured Material
Low High Low High
Tensile Strength (MPa/PSI) ASTM D 638 45 50 6530 7250
Tensile Modulus (MPa/KSI) ASTM D 638 2300 2630 334 381
Elongation at Break ASTM D 638 7% 20% 7% 20%
Flexural Strength (MPa/PSI) ASTM D 790 75 79 10880 11460
Flexural Modulus(MPa/KSI) ASTM D 790 2350 2550 341 370
Impact Strength (J/m /Ft-lbs/in) ASTM D 256 55 66 1.03 1.24
Heat Deflection ASTM D 648@ 66 PSI
@ 264 PSI47°C42°C
117°F108°F
Coefficient of Thermal Expansion (CTE)
ASTM E 831-93 30-50°C70-140°C
95180
53100
Water Absorption ASTM D 570-98 0.38% 0.38%
Glass Transition (Tg) DMA, E” 52°C 126°F
Shore D 78-80 78-80
Liquid Material
Viscosity @ 30 °C (86 °F) 650-750 cps
Penetration Depth (Dp) 4.6 mils
Critical Exposure (Ec) 8.3 mJ/cm2
Color White
Solid Density @ 25 °C (77 °F) 1.18 g/cm3
Liquid Density @ 25 °C (77 °F) 1.12 g/cm3
Measurement Condition Value
3D Systems Corporation333 Three D Systems CircleRock Hill, SC 29730 U.S.A.
Features
Toll-free: 800.889.2964Tel: +1 [email protected]
www.3dsystems.com
Warranty/DisclaimerThe performance characteristics of these products may vary according to product application, operating conditions, or with end use. 3D Systems makes no warranties of any type, express or implied, including, but not limited to, the warranties of merchantability or fitness for a particular use. © 2013 by 3D Systems, Inc. All rights reserved. Specifications subject to change without notice. Xtreme is a trademark, the 3D logo, Accura and SLA are registered trademarks of 3D Systems, Inc.
Measurement Condition Metric U.S.
PN 70740 Issue Date - March 2013
Tough/DurableC
lass
www.3dsystems.com
VisiJet® M3 Materials for ProJet SD & HD Printers
The VisiJet line of plastic materials offers numerous capabilities to meet a variety of commercial applications. 3D Systems’ ProJet 3500 3D printers use VisiJet M3 materials to build accurate, high-definition models and prototypes for proof of concept, functional testing, master patterns for moldmaking, and direct investment casting. Vertical markets for the ProJet 3500 line include transportation, energy, consumer products, recreation, healthcare and education. Toughness, high temperature resistance, durability, stability, watertightness, biocompatibility and castability are a few of the key attributes you will find within the VisiJet M3 materials line. Parts can be drilled, glued, painted, plated, etc. Support material offers easy, non-hazardous post-processing and preserves delicate features.
DISCLAIMER: It is the responsibility of each customer to determine that its use of any VisiJet® material is safe, lawful and technically suitable to the customer’s intended applications. The values presented here are for reference only and may vary. Customers should conduct their own testing to ensure suitability for their intended application.
Properties Condition VisiJet M3-X
VisiJet M3 Black
VisiJet M3 Crystal
VisiJet M3 Proplast
VisiJet M3 Navy
VisiJet M3 Techplast
VisiJet M3 Procast
VisiJet® S300
Composition -------------------------------------------- UV Curable Plastic -------------------------------------------- Wax Support Material
Color White Black Natural Natural Blue Gray Dark Blue White
Bottle Quantity 2 kg 2 kg 2 kg 2 kg 2 kg 2 kg 2 kg 2 kg
Density @ 80 °C (liquid) ASTM D4164 1.04 g/cm3 1.02 g/cm3 1.02 g/cm3 1.02 g/cm3 1.02 g/cm3 1.02 g/cm3 1.02 g/cm3 N/A
Tensile Strength ASTM D638 49 MPa 35.2 MPa 42.4 MPa 26.2 MPa 20.5 MPa 22.1 MPa 32 MPa N/A
Tensile Modulus ASTM D638 2168 MPa 1594 MPa 1463 MPa 1108 MPa 735 MPa 866 MPa 1724 MPa N/A
Elongation at Break ASTM D638 8.3 % 19.7 % 6.83 % 8.97 % 8 % 6.1 % 12.3 % N/A
Flexural Strength ASTM D790 65 MPa 44.5 MPa 49 MPa 26.6 MPa 28.1 MPa 28.1 MPa 45 MPa N/A
Heat Distortion Temperature @ 0.45MPa ASTM D648 88 °C 57 °C 56 °C 46 °C 46 °C 46 °C N/A N/A
Ash Content N/A N/A N/A 0.01 % 0.01 % 0.01 % 0.01 % N/A
Melting Point N/A N/A N/A N/A N/A N/A N/A 60 °C
Softening Point N/A N/A N/A N/A N/A N/A N/A 40 °C
USP Class VI Certified* No No Yes No No No No N/A
ProJet Compatibility SD, HD SD, HD SD, HD SD, HD SD, HD SD, HD HD SD, HD
Description ABS-like Plastic
High strength & flexibility
plastic
Tough Plastic,
Translucent
Plastic, Natural
Plastic, Blue
Plastic, Gray
Castable Plastic
Non-toxic wax ma-terial for hands-free melt-away supports
VisiJet M3 Navy VisiJet M3 Techplast VisiJet M3 Procast
VisiJet M3-X VisiJet M3 Crystal VisiJet M3 Proplast VisiJet M3 Black