NUTORK CORPORATION
Actuators & Valves
NK Series Rack & Pinion TypeMaterial in Aluminum / 304SS / 316SSPneumatic Actuator
Hard Anodized
Polyester Coated
Nickel Coated
Halar Coated
304SS / 316SS body actuators
PTFE Coated 0-180° Actuator
d A di dard Anodized
olyester Coated Halar Coated
304SS / 316SSbody actuators
1. Pressure Ranges2 bar(29 psig) to 8 bar(116 psig) double acting3 bar(44 psig) to 8 bar(116 psig) spring return
2. Temperature Ranges
3. Wide Range AvailableThe actuator range consists of 14 sizes, withtorques from 9Nm(80in.lbs) to 3,920Nm(34,660in.lbs) at 6 bar (87 psig) air supply.
4. Operating MediaFiltered dry or lubricated air for non-corrosive gas, water or light hydraulic oil.The maximum particle size must notexceed 30 microns.
5. Stroke Adjustment
6. LubricationAll moving parts are factory lubricatedfor entire life cycle of actuator.
7. ConstructionTwin piston rack and pinion actuator design,suitable for indoor and outdoor installation.
8. ConnectionsBottom drilling complies with ISO 5211/DIN3337 to match valve. Interface for solenoidvalve, shaft top end and top drilling forassembling accessories are in accordancewith VDI/VDE-3845, NAMUR standard.
9. InspectionEvery actuator is hydraulically tested, certified and guaranteed for a minimum of 1,000,000 cycles.
0°and 90° with standard adjustment ± 5°.
*Std.(NBR O-rings): -20°C(-4°F) to +80°C(+176°F)*Lower Temp. (HNBR O-rings):-40°C(-40°F) to +80°C(+176°F)*High Temp. (Viton O-rings): -15°C(+5°F) to +150°C(+300°F)
Note: Special grease is required for low and high temperature service condition.
1. IndicatorA position indicator with Namur mounting is standard on allNUTORK pneumatic actuators for mounting accessories.
Pinion2.The hardened alloy steel pinion is precision ground andNickel plated (over 15um) in order to reduce friction, providemaximum wear resistance. Full conformance with the neweststandards of ISO5211 & DIN3337. The dimensions can becustomized and as options, stainless steel and aluminiumalloy are also available.
3. Actuator BodyThe aluminum extrusion is hard anodized(over 30um) toprotect against wear and corrosion while reducing pistonfriction to the absolute minimum. Other options such asNickel, Ceramic, PTFE, Polyester coated are available.
4. End CapsEpoxy coated(over 80um) die cast aluminum endcaps provide maximum resistance against potentiallycorrosive elements. Other treatments such as Nickel,Ceramic, PTFE,Polyester coated are available.
5. PistonsThe precisely-balanced and hard anodized treatment (over 30um)die cast aluminum pistons are fitted withhigh quality rings and guides. The twin rack and pistondesign creates a constant torque output on all actuators.
6. Travel AdjustmentThe standard adjustment is ± 5°in both the open andclosed positions through easily accessible externaladjustment bolts.
High Performance Springs7.The high tensile steel springs are coated with Epoxycoated for corrosion resistance and longer service.The pre-loaded springs can be safely & rapidlydisassembled.
Bearings & Guides8.The highly durable compound material provides hightrust stability with minimum friction and long life.
9. O-RingsNBR O-rings provide trouble-free operation at standardtemperature ranges. Viton and HNBR O-rings areavailable for high or low temperature applications.
45
3
26
9
87
1
Pneumatic Actuator - Features
Pneumatic Actuator - Operating Conditions
w w w . n u t o r k . c o m1
s are factory lubricated
Pneumatic Actuator – NKD032 Parts List
w w w . n u t o r k . c o m2
Item
16
5 Thrust Bearing(Pinion)
Spring Clip
Piston
Piston Seal
Stroke Bolt
1
1
1
1
1
Extruded Alluminum Alloy
Alloy Steel
Nylon 66
Stainless Steel
Die Cast Aluminum Alloy
NBR
NBR
NBR
Stainless Steel
S.S. or Alu.Alloy
Stainless Steel
Die Cast Aluminum
1
27
Nickel or PTFE coated
Nickel or PTFE coated
*41 2
51 8
8* 2
231
9 2
12 2
11 2
10* Stroke Bolt O-Ring 2
4*
2
3* Viton / HNBR
Viton / HNBR
*Note: Recommended spare parts for maintenance.
Optional
Hard Anodized (over 30um)
Nickel Plated (over 15um)
Hard Anodized (over 30um)
Epoxy Coated (over 80um)
Actuator Body
Pinion
O-Ring(Lower Pinion)
Stroke Bolt Washer
Stroke Bolt Retaining Nut
End Cap
End Cap Seals
End Cap Bolts
O-Ring(Top Pinion)
Viton / HNBR
Viton / HNBR
Viton / HNBR
Q’ty
NBR
NBR
Stainless Steel
Stainless Steel
Description Material Protection
12 11 10 15 9 13 14 87
5
69
1513
1487
14
2
3
1011 12
Pneumatic Actuator – NK052~270 Parts List
w w w . n u t o r k . c o m3
Item Description Material Protection
1 Plastic 1
leetS sselniatSpilC gnirpS2 1
3 1
4 1
1(over 30um)
(over 15um)
dezidonA draH
(over 30um)dezidonA draH
yollA munimullA dedurtxEydoB rotautcA5
2yollA munimulA tsaC eiDnotsiP6
21-0leetS gnirpS ecnamrofreP hgiH)egdirtraC(gnirpS 7
RBNslaeS paC dnE*8 2
Nickel or PTFE coated
Nickel or PTFE coated
leetS sselniatSstloB paC dnE9 8
2 )mu08 revo(detaoC yxopEmunimulA tsaC eiDpaC dnE01
66 nolyNgniraeB notsiP*11 2
RBNlaeS notsiP *21 2
66 nolyNediuG notsiP *31 2
leetS sselniatStloB ekortS 41 2
15 2
16 2
17* 2
18* 1
19* 1
20* 1
leetS sselniatSmaC ekortS12 1
yollA.ulA ro .S.S1 detalP lekciN leetS yollAnoiniP22
23* 1
24* 1
gulP*52 2
** Note: Recommended spare parts for maintenance.
Optional Q’ty
Viton / HNBR
Viton / HNBR
Viton / HNBR
Viton / HNBR
Viton / HNBR
Viton / HNBR
Stainless Steel
Nylon 66
Stainless Steel
Stainless Steel
NBR
NBR
Nylon 66
Nylon 66
Nylon 66
NBR
NBR
Indicator
Thrust Washer(Pinion)
Thrust Bearing(Pinion)
Stroke Bolt Retaining Nut
Stroke Bolt Washer
Stroke Bolt O-Ring
O-Ring(Top Pinion)
Bearing(Top Pinion)
Thrust Bearing(Pinion)
Bearing(Lower Pinion)O-Ring(Lower Pinion)
Epoxy Coated
304SS/316SS/Pneumatic ActuatorNK052~210 Parts List
w w w . n u t o r k . c o m4
** Note: Optional material, Viton for high temp. and HNBR for low temp.application
1
2
34
5
6
16
15
1412
11
10 9 8 7 19 23
24
25
26
20
15
9
13
14
12111087
2122
17
18
Indicator ScrewIndicatorSnap RingWasherOutside WasherBodyPistonPiston O-ringPiston BearingSpringSpring Retainer(L,R)Retainer ConnectorEnd-Cap O-ringEnd-CapStop ScrewEnd-Cap Stop ScrewGuide PistonO-ring(Adjust screw)Nut(Adjust screw)Adjust ScrewPlugInside WasherCamTop Bearing Top O-ring PinionBottom Bearing Bottom O-ring
123456789
10
11121314151617181920212223242526
PlasticPlasticStainless steelStainless steelEngineering PlasticsStainless steelStainless steelNBREngineering PlasticsSpring SteelNylon 66BrassNBRStainless steelStainless steelStainless steelNylon 66NBRStainless steelStainless steelNBREngineering PlasticsStainless steelEngineering PlasticsNBRStainless steelEngineering PlasticsNBR
111111222
0-12
2228222221111111
Note
Item Description Material Qty. Remark
Note
Note
Note
Note
Note
The operating principle of double acting actuatorCCW-counter-clockwise CW-clockwise
Sizing example of NUTORK double acting actuator:Valve torque 100Nm plus 20% safety factor= 120Nm. Minimumoperating pressure 6bar(87psig). By reading down the 6bar(87psig) column the figure below 120Nm is 135.0Nm, The model number shown in the left hand column is therefore NKD-092.
Air to port A forces the pistons outwards, causing the piston to turn counter-clockwise while air is being exhausted from port B.
Air to port B forces the pistons inwards, causing the piston to turn clockwise while air is being exhausted from port A.
Pneumatic Actuator - Double Acting
w w w . n u t o r k . c o m5
Torque Table of Double Acting Actuator
Model
NKD-032
NKD-052
NKD-063
NKD-075
NKD-083
NKD-092
NKD-105
NKD-125
NKD-140
NKD-160
NKD-190
NKD-210
NKD-240
NKD-270
NKD-300
NKD-350
NKD-400
4.6
12.0
21.9
30.1
47.0
67.7
99
151
257
399
638
798
1154
1755
2029
3012
4589
6.1
16.0
29.2
40.1
62.7
90.3
132
201
342
532
851
1064
1539
2339
2729
4050
6172
6.9
18.0
32.8
45.1
70.5
101.6
149
226
385
599
958
1197
1731
2632
3079
4570
6963
7.6
20.0
36.5
50.2
78.4
112.9
165
251
428
665
1064
1330
1924
2924
3429
5089
7755
8.4
21.9
40.1
55.2
86.2
124.1
182
276
470
732
1170
1463
2116
3217
3779
5608
8546
9.2
23.9
43.8
60.2
94.1
135.4
198
301
513
798
1277
1596
2309
3509
4129
6128
9337
10.7
27.9
51.1
70.2
109.7
158.0
231
351
599
931
1490
1862
2693
4094
4829
7166
10920
12.2
31.9
58.4
80.3
125.4
180.6
265
401
684
1064
1702
2128
3078
4679
5528
8205
12502
3.0 4.0 4.5 5.0 5.5 6.0 7.0 8.0
Air Supply Pressure(unit:bar)
Output Torque(Nm)
Unit : Nm
Pneumatic Actuator - Spring Return (Fail Safe)
w w w . n u t o r k . c o m6
The operating principle of single acting spring return actuator
CCW-counter-clockwise CW-clockwise
Mounting Variations Spring Arrangement
CCW-counter-clockwise
CW-clockwise
A B A B
C
D
A
B
5 Springs 6 Springs
7 Springs 8 Springs
9 Springs 10 Springs
11 Springs 12 Springs
Sizing example of NUTORK spring return actuator:
Spring to close when air fails(air to open):
Valve torque 60Nm plus 20% safety factor = 72Nm. Minimum
operating pressure: 6bar(87psig). The spring return NUTORK actuator
selected is NKS-105-12.The NKS-105-12 has the following output
torques:
1.air torque 0°(valve close) = 122.5Nm > 72Nm
2.air torque 90°(valve open) = 80.6Nm
゜3.spring torque 90 (valve open) = 118.1Nm
4.spring torque 0°(valve close) = 75.9Nm > 72Nm
Air to port A forces the pistons outwards, causing the springs
to compress. The pinion turns counter-clockwise while air is
being exhausted through port B.
Loss of air pressure through port A allows the stored energy in the
springs to force the pistons inwards. The pinion turns clockwise
while air is being exhausted through port A.
Pneumatic Actuator -Torque Table(Nm)
w w w . n u t o r k . c o m7
0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90°Air Torque Output(Nm)Model Spring
SetSpring Torque
(Nm)
Air Supply Pressure(Unit:bar)2.5 3.0 4.0 5.0 6.0 7.0 8.0
NKS-052
NKS-063
NKS-075
NKS-083
NKS-092
NKS-105
NKS-125
NKS-140
5678910111256789101112567891011125678910111256789101112567891011125678910111256789101112
4.35.05.96.77.68.59.3
10.26.88.29.6
10.912.313.715.016.410.512.714.816.919.021.123.225.315.819.022.125.328.531.634.838.023.328.032.737.342.046.751.456.031.638.044.350.656.963.369.675.95263738494
10511512586
103120137155172189206
6.27.48.69.9
11.112.413.614.810.412.514.616.718.820.922.925.014.517.420.323.226.129.031.934.723.027.632.236.841.446.050.655.234.441.248.155.061.968.775.682.549.259.168.978.788.698.4
108.3118.1
7994110125141157173188129155181206232258284310
5.74.94.0---------------
14.110.18.6---------------
14.512.410.4
---------------
23.720.117.0
---------------
33.128.423.8
---------------
51.044.738.4
---------------736352---------------
12811194---------------
3.82.51.3---------------
7.75.73.6---------------
10.67.64.8---------------
16.111.56.9---------------
22.015.28.2---------------
33.423.513.7
---------------473115---------------855933---------------
7.66.96.05.24.3---------
15.013.612.510.9
------------
19.417.315.213.1
------------
31.128.024.821.7
------------
44.239.634.931.3
------------
67.561.154.948.5
------------98887767------------
171154137120------------
5.74.53.32.00.8---------
11.49.37.25.1------------
15.512.69.76.8------------
24.019.314.810.1
------------
33.226.419.412.6
------------
49.940.030.320.4
------------72564025------------
1271027650------------
---10.99.89.28.37.46.6---
22.320.919.518.216.811.4
------
29.527.425.323.121.019.0
------
46.843.740.537.434.231.0
------
66.862.257.552.948.243.6
------
100.694.287.981.675.368.9
------
14813812711710796------
256239222205187170------
---8.57.36.04.83.62.3---
14.916.614.512.410.48.2------
25.722.719.916.914.111.1
------
37.935.130.525.821.316.6
------
55.949.042.135.228.421.5
------
83.073.263.453.543.733.4
------
12210790755944------
21318716213611084------
------
14.013.212.311.510.69.7---
28.326.825.524.122.821.520.0
---37.535.433.331.228.827.024.9
---59.456.253.149.946.743.640.4
---84.880.275.570.966.261.556.8
---127.3121.0114.7108.4102.095.789.4
---188178167157146136125---
325308291273256238221
------
10.49.17.96.75.44.2---
23.921.919.817.715.613.511.4
---32.829.927.024.121.218.315.4
---50.746.241.537.032.327.723.2
---71.664.757.951.044.137.230.4
---106.296.486.576.866.557.047.5
---157141125109947863---
273247221196169143118
---------
17.216.315.514.613.8
---------
32.831.430.028.727.3
---------
43.241.139.037.034.9
---------
68.865.662.459.356.1
---------
98.193.588.884.179.4
---------
147.7141.5135.1128.7122.5
---------
217207196186176---------
376358341324307
---------
14.112.811.610.49.1---------
27.024.922.820.718.6
---------
37.034.131.228.325.4
---------
57.252.648.043.438.9
---------
80.573.666.759.953.0
---------
119.6109.899.690.180.6
---------
176159144128113---------
307281255229203
------------
20.319.518.617.8
---------
40.138.737.336.034.6
---------
53.351.249.147.044.9
---------
84.581.278.175.071.7
---------
120.7116.0111.3106.6101.9
---------
180.8174.5168.2161.8155.5
---------
268257247236226---------
462444427409392
------------
16.815.614.312.2
---------
34.332.230.128.025.9
---------
47.044.241.238.435.4
---------
72.968.363.759.154.5
---------
103.096.189.282.475.5
---------
152.7142.9132.6123.1113.6
---------
226210194178163---------
392367340314289
------------------
22.621.8
---------------
44.743.341.9
---------------
59.157.054.9
---------------
93.890.687.4
---------------
134.0129.2124.5
---------------
201.2194.8188.6
---------------
297286276---------------
512495478
------------------
18.317.1
---------------
37.435.333.3
---------------
51.248.445.4
---------------
79.374.870.2
---------------
111.8105.098.1
---------------
165.7156.2146.7
---------------
245228213---------------
426400374
unit:Nm
Pneumatic Actuator -Torque Table(Nm)
w w w . n u t o r k . c o m8
0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90°Air Torque Output(Nm)Model Spring
SetSpring Torque
(Nm)
Air Supply Pressure(Unit:bar)2.5 3.0 4.0 5.0 6.0 7.0 8.0
NKS-160
NKS-190
NKS-210
NKS-240
NKS-270
NKS-300
NKS-350
NKS-400
56789
10111256789
10111256789
10111256789
10111256789
10111256789
10111256789
10111256789
101112
140168196223251279307335200240280320360400440480275330385440495550605660410490575656739821903985560672783895
1007111912311342691829968
11061244138215201659994
119313921591179019892188238614711765205923532647294132353529
208250292333375417458500309371433495557618680742380456532608684760836912554665775886998110812191330787943110112581416157217301887103212381445165118572064227024771476177120662361265629513246354121482577300734363866429547255154
193165137---------------
332292252---------------
390335280---------------
552470388---------------
903790679---------------
988849------------------
1498---------------------
2328---------------------
1248341---------------
22216199---------------
285209133---------------
409297187---------------
675519361---------------
647440------------------
1017---------------------
1651---------------------
259232203176------------
438398358318------------
523468413358------------
744662580498------------
11951083972860------------
133812001062
---------------
201818191620
---------------
311928252531
---------------
19114910766------------
329267205143------------
418342266190------------
600489379268------------
968811654479------------
998791585---------------
15361241946---------------
244220121583
---------------
392365336309280253------
651611571531491451------
789734679624569514------
11291047964883800718------
177916671556144413321220
------
20381900176216231485
---------
305628572658246022612062
------
470144074113381935253231
------
324282240199157115------
542480418356295233------
684608532456380304------
985874764653542431------
1552139612381081923767------
1697149112851078872---------
257522801985169013951100
------
402435953165273623061877
------
---498469442413386358330---
824784744704664624584---
1000945890835780725670---
143213491267118511031021939---
2252214120291917180516931582
---260024612323218520471909
---3896369734983299310029022703
---5990569654025108481345194225
---415373332290248207165---
693631569507446384322---
874798722646570494418---
125911491037926816705594---
1981182316661509135211971037
---219119841778157213651159
---3318302327282433213818431548
---5177474843183889345930302600
---------
575546519491463---------
957917877837797---------
115611011046991936---------
16521569148814061323
---------
26142502239022782167
---------
30232885274726082470
---------
45374338413939403741
---------
69846690639661025808
---------
465423381340298---------
782720658597535---------
988912836760684---------
1422131112011090979---------
22522094193717791623
---------
24782271206518591652
---------
37673472317728822586
---------
59015471504246124183
---------
708679652624596---------
11691130109010501010
---------
14221367131212571202
---------
20371954187217911708
---------
31993087297428622751
---------
44234284414640083870
---------
55755376517749794780
---------
85678273797976857390
---------
598556514473431---------
995933871809748---------
1254117811021026950---------
18071696158614711363
---------
28362678252123642207
---------
31782971276525582352
---------
48054510421539203625
---------
74837054662461955765
---------------
785757729---------------
130212631223
---------------
157815231468
---------------
225721762093
---------------
356034483336
---------------
414640083870
---------------
621660175818
---------------
956192678973
---------------
647606564---------------
10841022960---------------
136812921216
---------------
197018591748
---------------
310729492792
---------------
346532583052
---------------
525449594664
---------------
820777777348
unit:Nm
Pneumatic Actuator - Dimension Table
w w w . n u t o r k . c o m9* Dimensions for reference only, subject to change.
Dimension Table Unit: mminch
NAMUR
1/4 NAMUR 1/2 NAMUR NK-400
Model A B C D E F G H I N J K L M Air Connection110 45 45 65 22.5 22.5 11 50 25 9 M5*7.54.33 1.77 1.77 2.65 0.89 0.89 0.89 1.97 0.98 0.35 #10-24UNF146 72 60 92 26 41.5 14 80 30 11 M6*10 M5*7.55.74 2.83 2.36 3.62 1.02 16.33 0.55 3.15 1.18 0.43 1/4"-20UNC #10-24UNF169 88 69.5 108 33.5 47 17 80 30 14 M8*13 M6*106.65 3.46 27.36 2.25 1.31 1.85 0.66 3.15 1.18 0.55 5/16"-20UNC 1/4"-20UNC186 100 78 120 39 53 17 80 30 14 M8*13 M6*107.32 3.93 3.07 4.72 1.53 2.08 0.66 3.15 1.18 0.55 5/16"-20UNC 1/4"-20UNC210 109 86 129 40 57 20 80 30 17 M8*13 M6*108.26 4.29 3.38 5.07 1.57 2.24 0.79 3.15 1.18 0.67 5/16"-20UNC 1/4"-20UNC264 117 90.5 137 44.5 58.5 20 80 30 17 M8*13 M6*10
10.39 4.6 3.56 5.39 1.75 2.3 0.79 3.15 1.18 0.67 5/16"-20UNC 1/4"-20UNC272 133 104 153 52 64 26 80 30 22 M10*16 M8*1310.7 5.23 4.09 6.02 2.04 2.51 1.02 3.15 1.18 0.87 3/8"-20UNC 5/16"-20UNC302 155 120 185 60 74.5 25 130 30 22 M10*16 M8*13
11.88 6.1 4.72 7.28 2.36 2.93 0.98 5.11 1.18 0.87 3/8"-20UNC 5/16"-20UNC398 172 125 202 65 77 30 130 30 27 M12*20 M10*16
15.66 6.77 4.92 7.95 2.55 3.03 1.18 5.11 1.18 1.06 1/2"-20UNC 3/8"-20UNC456 197 142 227 74 87 30 130 30 27 M12*20 M10*16
17.95 7.75 5.59 8.93 2.91 3.42 1.18 5.11 1.18 1.06 1/2"-20UNC 3/8"-20UNC534 230 172 260 86 103 40 130 30 36 M16*20
21.02 9.05 6.77 10.23 3.38 4.05 1.57 5.11 1.18 1.42 5/8"-20UNC536 255 194 285 97 113 43 130 30 36 M16*2021.1 10.03 7.63 1.12 3.81 4.44 1.69 5.11 1.18 1.42 5/8"-20UNC612 290 230 320 115 130 50 130 30 46 M20*25
24.09 11.41 9.05 12.59 4.52 5.11 1.97 5.11 1.18 1.81 3/4"-20UNC718 330 252 360 126 147 50 130 30 46 M20*25
28.26 12.99 9.92 14.17 4.96 5.78 1.97 5.11 1.18 1.81 3/4"-20UNC784 354 335 384 162 173 50 130 30 46 M20*25
30.86 13.93 13.2 15.11 6.37 6.8 1.97 5.11 1.18 1.81 3/4"-20UNC845 410 385 440 190 195 50 130 30 46 M20*25
33.26 16.14 15.15 17.32 7.48 7.67 1.97 5.11 1.18 1.81 3/4"-20UNC956 466 520 496 260 260 60 130 30 55 M16*20
37.63 18.34 20.47 19.52 10.23 10.23 2.36 5.11 1.18 2.16 5/8"-20UNCF25 --- 1/2"
---
---
---
---
---
---
---
F16 --- 1/2"
F16 --- 1/2"
F16 --- 1/4" or 3/8"(std)
F16 --- 1/4" or 3/8"(std)
F14 --- 1/4"
F14 --- 1/4"
F12 F10 1/4"
F12 F10 1/4"
1/4"
F10 F07 1/4"
1/8" or 1/4"(std)
F07 F05 1/8" or 1/4"(std)
1/8" or 1/4"(std)
F07 F05 1/8" or 1/4"(std)
1/8"
F05 F03 1/8" or 1/4"(std)
NK-400
F03 --- ---
F07 F05
F07 F05
F10 F07
NK-240
NK-270
NK-300
NK-350
NK-140
NK-160
NK-190
NK-210
NK-083
NK-092
NK-105
NK-125
NK-032
NK-052
NK-063
NK-075
w w w . n u t o r k . c o m10
* Dimensions for reference only, subject to change.
304SS/316SS Pneumatic ActuatorDimension Table
Dimension Table Unit: mminch
G 1/4”NAMUR NAMUR
JK
4*M
A
H
4*L G44 32
BD
E
C
F
24
24
120.472
40.157 4
0.157
M6
464x 2:1 2:1M5-8
#10-32UNF
Model
NK-SS-052
NK-SS-063
NK-SS-083
NK-SS-105
NK-SS-125
NK-SS-140
NK-SS-160
NK-SS-210
1465.71736.82048.027010.1302
11.8939415.545618
56822.3
A B C D E F G H I N J K L M
722.8883.51084.31335.21556.11726.81987.825710.1
301.2361.4481.9502582.3692.775
2.95903.5
923.61084.31285
1536
1756.91927.62188.628711.3
471.9542.165.52.6773873.495.53.761064.21335.2
321.3381.5481.9602.469.52.7773873.41134.4
140.6180.7210.8261
27.6132
1.26341.3401.6
803.1803.1803.1803.21305.11305.11305.11305.1
301.9301.2301.2301.2301.2301.2301.2301.2
110.4140.6170.722
0.8722
0.87271.1271.1361.4
M6×101/4”-20UNC
M8×135/16”-18UNC
M8×135/16”-20UNC
M8×133/8”-16UNC
M10×163/8”-16UNC
M12×201/2”-12UNC
M12×201/2”-12UNC
M16×245/8”-11UNC
M5×7.5#10-24UNF
M6×101/4”-32UNC
M6×121/4”-20UNC
M8×135/16”-18UNC
M8×135/16”-20UNC
M10×163/8”-16UNC
M10×163/8”-16UNC
F05
F07
F07
F10
F102
F12
F12
F14
F03
F05
F05
F07
F07
F10
F10
G 1/4”
G 1/4”
G 1/4”
G 1/4”
G 1/4”
G 1/4”
G 1/4”
G 1/4”
AirConnection
Pneumatic Actuator - Technical Data
w w w . n u t o r k . c o m11
Air Consumption - Air Volume Opening & Closing
Weight (kg)
Operation Time (Second)
Order Information
Note: The part numbers are represented as the following: Type-Model-Spring Set-Seals-Options
Air consumption rest with Air supply. Air volume and Action cycle times, expressions L/Min=Air volume(Air volume Opening+Air Volume Closing)X[(Air Supply(Kpa)+101.3)/101.3]X Action cycle time(/min)
(Model)
NK-32
NK-52
NK-63
NK-75
NK-83
NK-92
NK-105
NK-125
NK-140
Model
DA
S
DA(0°-90°)DA(90°-0°)SR6(0°-90°)SR6(90°-0°)SR7(0°-90°)SR7(90°-0°)SR8(0°-90°)SR8(90°-0°)SR9(0°-90°)SR9(90°-0°)SR10(0°-90°)SR10(90°-0°)SR11(0°-90°)SR11(90°-0°)SR12(0°-90°)SR12(90°-0°)
Actuator Body Mateial Spring Set Seal Material Option
Blank (Double Acting Actuator)
0506070809101112
Standard: NBR
HT(High Temperature):Viton
LT(Low Temperature): HNBR
(0-120° operation)
(0-180° operation)
Aluminum Alloy BodyNKD (Double Acting Actuator)(Spring Return Actuator)
ModelNK-032NK-052NK-063NK-075NK-083NK-092NK-105NK-125NK-140NK-160NK-190NK-210NK-240NK-270NK-300NK-350NK-400
316SS BodyNKD-S6 (Double Acting Actuator)NKS-S6(Spring Return Actuator)
304SS BodyNKD-S4(Double Acting Actuator)NKS-S4(Spring Return Actuator)
NK-320.30.4------------------------------------------
NK-520.6
0.532.460.482.480.462.5
0.442.520.422.540.4
2.560.382.580.36
NK-630.660.582.540.562.560.542.580.522.60.5
2.620.482.640.462.660.44
NK-750.720.642.620.642.640.622.660.6
2.680.582.7
0.562.720.542.740.52
NK-830.830.732.710.732.730.712.750.692.770.672.790.652.810.632.830.61
NK-921
0.862.890.862.910.842.930.822.950.8
2.970.782.990.763.010.74
NK-1051.351.3
3.140.913.160.893.180.873.2
0.853.220.833.240.813.260.79
NK-1252.4
1.794.241.2
4.261.184.281.164.3
1.144.321.124.341.1
4.361.08
NK-1402.52.14.4
1.354.4
1.334.621.314.641.294.661.274.681.254.681.22
NK-1603.932.6
4.741.774.761.754.781.734.8
1.714.821.694.821.674.841.65
NK-1904.553.455.753.7
5.773.5
5.753.485.773.465.793.445.8
3.425.833.4
NK-2105.5
4.358.254.88.44.6
8.424.588.444.568.464.548.484.528.54.5
NK-2408.4
8.3316.25.1416.45.12
16.425.1
16.444.9
16.64.9816.84.8617
4.84
NK-27010.98.5317.66.2817.86.2617.66.2417.86.218
6.1818.26.1618.46.14
NK-30056
Please contact Nutork
NK-3506.27.2
NK-4007.58.5
NK-32
0.47
---
NK-52
1.38
1.45
NK-63
2.03
2.05
NK-75
2.7
2.9
NK-83
3.13
3.6
NK-92
4.6
5.22
NK-105
6.77
6.85
NK-125
8.9
10.11
NK-140
13.25
15.55
NK-160
20.14
24
NK-190
31.3
35.25
NK-210
46.8
54.8
NK-240
67.28
80.2
NK-270
96.9
118
NK-300
108
135.6
NK-350
146.7
188.1
NK-400
220.5
283.5
0.03
0.12
0.21
0.3
0.43
0.64
0.95
1.6
2.5
0.04
0.16
0.23
0.34
0.47
0.73
0.88
1.4
2.2
NK-160
NK-190
NK-210
NK-240
NK-270
NK-300
NK-350
NK-400
3.7
5.9
7.5
11
17
19.1
27.7
42.8
3.2
5.4
7.5
9
14
28.2
44.1
62.1
Air Volume@Opening(liter)
Air Volume@Closing(liter)
(Model) Air Volume@Opening(liter)
Air Volume@Closing(liter)
NUTORK CORP. manufactures a wide range of pneumatic actuators, electric actuators and theaccessories of pneumatic actuator (limit switchbox, solenoid valve, manual override ---etc.) for quarter turn valves
Nutork Corp. supply the following product range:
NUTORK
NK series rack & pinion type (CE-ATEX certified and PED compliant)14 models, the output torque from 9Nm(80in.lbs) to 3,920Nm(34,660in.lbs) at 6 bar air supply. ISO5211/DIN3337 for valve connection, VDI/VDE 3845(Namur) standard connection for solenoid valve and shaft top end(limit switchbox or E/P positioner), +/-5 degree stroke adjustment. 25~30um standard hard anodized treatment on actuator body and over 120um epoxy coated on end caps which meet ASTM B117 qualification(salt spread test over 1,000 hours and no corrosion.
PTFE, Polyester, Nickel, Ceramic and Epoxy coated are available on request.
NSF series scotch yoke type pneumatic and hydraulic actuators(CE-ATEX certified and PED compliant)The output torque from 978Nm(8,656in.lbs) to 226,200Nm (2,001,870in.lbs) at 6 bar air supply. Anti-corrosion painting on outer body and cylinder as standard. VDI/VDE 3845(Namur) standard connection for shaft top end(limit switchbox or E/P positioner), +/-10 degree stroke adjustment. ISO5211 standard for valve connection. PTFE coated on inner cylinder surface. Hydraulic manual override is available for big size actuator.
NTE series electric actuator, CE approval13 models and the output torque from 18Nm(159in.lbs) to 6000Nm(53,106in.lbs), compact design, die-casting aluminum alloy housing, alloy steel with heat treatment gear driving unit, integral wormgear & drive shaft, 30% duty rating, detachable crank handle, ISO5211(option), IP67 enclosure.IP68 for option.
NTQ electric actuator, CE approval(IP67 & EExdIIBT4 enclosure)13 models, the output torque from 100Nm(885in.lbs) to 6,000Nm(53,106in.lbs), de-clutchable manual override, 2xSPDT each for open & close, torque switch: 1xSPDT each for open & close. space heater, self-lock, IP67 & EExdIIBT4 enclosure.
The fully range accessories(Limit Switchbox, Solenoid Valve, Declutchable Manual Override, Air Filter regulator, E/P Positioner ---etc).
NTE-02L Quarter Turn Electric ActuatorOutput torque 25Nm(222in.lbs),operation time 10Sec;voltage 24VAC,110VAC & 220VAC for option,ABS housing,30% duty rating,IP65 enclosure.
Agent: