AERIAL AND SCISSOR LIFT ONLINE TRAINING INFO
Operator safety training & instructions and certification information. Samples from online training course that meets the OSHA and ANSI requirement for powered trucks.
HR Training University | 50 Fairview Ave. Pt. Washington, NY 11050 | 800-501-9440 |
Print Wallet Size
“Certification Cards For
Employees
This presentation is for illustration purposes only and is not intended for training purposes. It is your responsibility to strictly follow all additional guidelines that apply to your own workplace and equipment operation.
HR Training University | 50 Fairview Ave. Pt. Washington, NY 11050 | 800-501-9440 | [email protected]
m
Aerial and Scissor Lift
New Lifts have replaced scaffolding and “manbaskets”.
There are many different type of lifts, generally referred to as “Aerial Work Platforms”
Type of Aerial Lifts
HR Training University | 50 Fairview Ave. Pt. Washington, NY 11050 | 800-501-9440 |
Sample
Main safety bodies for aerial platforms are: OSHA and ANSI Each agency issues safety standards that
must be followed Supervisors and Operators should
familiarize themselves with the standards
Governing Safety Bodies
HR Training University | 50 Fairview Ave. Pt. Washington, NY 11050 | 800-501-9440 | [email protected]
m
Operators of Lifts should always inspect the equipment each day before using. The operator’s manual usually contains a checklist to help you
Monthly or yearly inspections of equipment must be conducted by a competent person. Records must be maintained along with any work that is done to the equipment.
Operating Instructions must always be posted on the equipment and all operators should be familiar with the contents.
Operator Safety-Getting Started
HR Training University | 50 Fairview Ave. Pt. Washington, NY 11050 | 800-501-9440 |
HR Training University | 50 Fairview Ave. Pt. Washington, NY 11050 | 800-501-9440 |
Inspection ReportAt the conclusion of your inspection report any damage to your supervisor
Load tests must be conducted on a regular basis. Never use a machine in need of repair.
Load Tests for Aerial Lifts
HR Training University | 50 Fairview Ave. Pt. Washington, NY 11050 | 800-501-9440 | [email protected]
m
Aerial & Scissor Lift Training
HR Training University | 50 Fairview Ave. Pt. Washington, NY 11050 | 800-501-9440 |
Aerial and Scissor Lift Training-sample Test Drive the equipment and make sure the
brakes work properly.
HR Training University | 50 Fairview Ave. Pt. Washington, NY 11050 | 800-501-9440 |
Turret and BoomThe main part of the turret section are the rotation bearing and motor, lift cylinder and boom pins and bushings, and the hydraulic hoses and wiring.
The bearings and pins and bushings need to be inspected from time to time for lubrication and wear.
HR Training University | 50 Fairview Ave. Pt. Washington, NY 11050 | 800-501-9440 | [email protected]
m
Safety Warnings For Aerial Lifts
Sample from section on “Manual and Decals”
HR Training University | 50 Fairview Ave. Pt. Washington, NY 11050 | 800-501-9440 |
Powerline Contact Working Around
Powerlines Tipover Hazard Falls From Platforms Struck or Crushed
by Lift Improper
Maintenance Other Hazards
HR Training University | 50 Fairview Ave. Pt. Washington, NY 11050 | 800-501-9440 |
Hazards-Examples From Course
HR Training University | 50 Fairview Ave. Pt. Washington, NY 11050 | 800-501-9440 |
Certificate of Completion & Wallet Size Cards-Print Out Upon Completion
2 Hours Of
Training Include
d for $49
Register online with any major credit card, only $49
Receive “Certificate of Completion” upon completion and wallet size “certification” card.
Just complete your on-site training with a competent employee on the equipment you will be using.
REGISTER ONLINE NOW> or call 800-501-9440 for more info
Aerial Lift & Scissor Lift Online Training
HR Training University | 50 Fairview Ave. Pt. Washington, NY 11050 | 800-501-9440 | [email protected]
m