HUDSONProducts Corporation
®
For more information on this or any other product, please contact:
HUDSON PRODUCTS CORPORATION9660 Grunwald Road, Beasley, Texas 77417-8600Phone: (281) 396-8100Fax: (281) 396-82111-800-634-9160 (24 Hours)E-Mail: [email protected]
www.hudsonproducts.com
Air-Cooled Heat Exchangers
A Subsidiary of Hudson Products Holdings, Inc.
Fin-Fan® Induced DraftThe induced draft configuration positions the fans above the exchangerbundle. High velocity hot air exhaust reduces hot air recirculation, andplenums protect the exchanger bundle from the elements. Induced draftexchangers are well suited for lower process temperatures and forapplications that would be adversely effected by recirculation.
Fin-Fan® Forced DraftIn the forced draft configuration, fans and mechanical components arepositioned below the exchanger bundle. Because the fans are in the cool airstream, horsepower requirements are slightly lower and maintenancepersonnel are protected from high exit air temperatures. Forced draftexchangers are well suited for high-temperature service. For extremely highprocess pressures, serpentine or U-bend exchangers are available.
Fin-Fan® WinterizedAir-cooled heat exchangers in cold climates may require winterization forfreeze protection and process temperature control. To prevent process fluidsfrom freezing, the exchanger is equipped withautomatic louvers and recirculation chambersto mix warm exhaust air with cold inlet air.
Copyright © Hudson Products Corporation
