Albeo™ LED LuminaireHazardous Location High Bay & Low Bay Lighting(AHH1 - Series)
The Albeo™ AHH1-Series is a Class I, Division 2, Groups A,B,C, and D rated fixture for hazardous locations with high ambient temperatures and wet applications. Utilizing a sealed, IP66-rated form factor, the Albeo™ AHH1-Series offers customers a rugged design with exceptional performance and high reliability.
Product Description:
Project name _________________
Date ________________________
Type ________________________
Product Dimensions:
• Designed to meet recommended luminance and illuminance requirements for high bay applications in hazardous atmospheres that contain gases and vapors (acetylene, hydrogen manufactured gases containing more that 30% hydrogen by volume, ethylene, cyclopropane, hexane, butane, propane, acetone, benzene, & gasoline) that are not normally hazardous.•T4Aratingat50-65C;T5ratingat40-50C.
• Diecastaluminumhousing.•Designaccommodatesasingleordoublefixturewith1or2LED modules per fixture.
• AHH1-serieslenssystemenableLEDstoprovideoptimizedillumination foropenfloorandrackedaisleswithphotometricdistributionsof55,90 and 120 degrees.•UtilizeshighbrightnessLEDs,70CRIat4000K&5000Ktypical.•LM-79,LM80testsandreportsareperformedinaccordancetoIESNA standards.•Choice of low-Iron tempered glass or polycarbonate lens for sealed opticalcavity.BothlensesareIK08impactrated.
Applications:
Housing:
• 5-yearlimitedsystemwarrantystandard.
• 120-277Vvoltand347/480voltavailable.• Systempowerfactoris>90%*andTHD<20%*.• EMI:Title47CFR15ClassA.•InternalSurgeProtection -For120-277VACperIEEE/ANSIC62.41.-1991,3kV/3kA Location Category B3. -For347/480VACperIEEE/ANSIC62.41.-1991,6kV/3kA Location Category B3.* SystempowerfactorandTHDistestedandspecifiedat120Vinputand maximum load conditions.
Warranty:
Electrical:
LED&OpticalAssembly:
Standard:•UL844ClassI,Division2,GroupsA,B,C,D.•CSAC22.2NO.137.ForuseinHazardousLocations. • DLC Premium qualified. Please refer to: http://www.designlights.org/QPL for complete information. • UL1598SuitableforWetLocations.• UL8750LEDequipmentinLightingProducts.• TemperatureRating:-30Cupto+65C.•ProjectedL70≥100,000LifeHoursperIESTM-21.•RoHS.Corrosive Resistant:•UL1598AInsideDripProof-Type*•3,000hoursofASTMB117SaltSpray*•NEMA4XEnclosureType* * Choose Finish option “R = Corrosion Resistant”
Ratings:
• 0-10VDimming.
Controls:
• StandardFinish:polyesterpowdercoat.• CorrosionResistantFinish:polyesterpowdercoat with passivation layer. •Standardcolor:White.
Finish:
• ¾”NPTpendantmount.•Cordlengthoptionsavailable.
Mounting:
SingleFixture120-277V 21lbs.max
SingleFixture347/480V 23lbs.max
DoubleFixture120-277V 45lbs.max
DoubleFixture347/480V 49lbs.max
Configuration Max Weight
Single Fixture
Side View
Double Fixture
32.5in824mm
19.3in489mm
3.5in89mm
6.2in156mm
SIDE VIEW FOR SINGLE FIXTURE AND DOUBLE FIXTURE
16.0in405mm
19.3in489mm
3.5in89mm
6.2in156mm
SIDE VIEW FOR SINGLE FIXTURE AND DOUBLE FIXTURE
16.0in405mm
19.3in489mm
3.5in.[89mm]
16.0 in.[405mm]
6.2 in.[156mm]
SIDEVIEWFORSINGLEFIXTUREANDDOUBLEFIXTURE
32.5in.[824mm]
19.3in.[489mm]
19.3in.[489mm]
www.gelighting.comGEandtheGEMonogramaretrademarksoftheGeneralElectricCompany.Allothertrademarksarethepropertyof their respective owners. Information provided is subject to change without notice. All values are design or typical valueswhenmeasuredunderlaboratoryconditions.GELightingisabusinessoftheGeneralElectricCompany. ©2015GE.
ALB036(Rev08/15/16)
Ordering Number LogicHazardous Location High Bay & Low Bay Lighting (AHH1)
A H H 1 N 2 3 N _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
PRODUCTID
VOLTAgE(UL) CONFIgURATION
1=SingleFixture (1LEDModule)2=SingleFixture (2LEDModule)4=DoubleFixture (2LEDModule)
1 = 120° Glass5 =55°Glass9 =90°GlassA=120°PC*B=55°PC*C=90°PC*D = 120° PC Dif-fused**Note: PC = PolycarbonateNote: Polycarbonate lenses are not recommended for outdoor use.
N =NoneV =0-10VDimming**Note:2-conductor cord for dimming is factory installed. See imagesbelow.
N =None W = WhiteR = Corrosion Resistant
23 = Pendant 0 =120V-277V5 =480VD =347V
70 Plus CRI47=4000K57=5000K
PLUg FINISHMOUNTINgMOTION/DAyLIgHTSENSOR
A=6ft18ga cord*B=12ft18ga cordC=20ft18ga cord*6ftcordstandard unless otherwise specified.
N=None
LED COLOR TEMP
OPTICSBEAM
CONTROL WIRINg CORD
LUMENOUTPUT
A = Albeo
H = Hazardous
H = High Bay
1 = Generation
Note: Lumen estimates shown is for 120° (1) optic.
T = Standard OuputH =HighOutput
1 T 8,800 64 138 65°C
1 H 11,800 90 131 60°C
2 T 17,400 125 139 65°C
2 H 23,000 178 129 60°C
4 T 34,800 250 139 65°C
4 H 46,000 356 129 60°C
CONFIg. LUMENOUTPUT LPW
MAxIMUMAMBIENT
TEMPERATURE
1 T T5 T5 T5 T4A
1 H T5 T4A T4A -
2 T T5 T5 T5 T4A
2 H T5 T4A T4A -
4 T T5 T5 T5 T4A
4 H T5 T4A T4A -
CONFIg. LUMENOUTPUT
40°CAMBIENT
50°CAMBIENT
60°CAMBIENT
65°CAMBIENT
4000K & 5000K70 CRI
120-277V & 347/480V
TyPICAL INITIAL LUMENS
TyPICAL SySTEMWATTAgE
1 LED Module
2 LED Module
DIMMING CORD
NO DIMMING
DIMMING CORD
NO DIMMING
Maximum Temperature
RangeIdentification
Number
T1 450 T3A 180
T2 300 T3B 165
T2A 280 T3C 160
T2B 260 T4 135
T2C 230 T4A 120
T2D 215 T5 100
T3 200 T6 85
IDENTIFICATIONNUMBER
IDENTIFICATIONNUMBER
DEgREES C DEgREES C
Temperature Code - Reference Information
No Dimming
Dimming Cord
Wide (120°) Glass 100%
Area(90°)Glass 98%
Aisle(55°)Glass 93%
Wide(120°)Polycarbonate 95%
Area(90°)Polycarbonate 94%
Aisle(55°)Polycarbonate 88%
Diffuse(120°)Polycarbonate 90%
OPTICSBEAM
%OUTPUT
