THE FOUR ZONES
YOUR RECIPE FOR THE IDEAL KITCHEN
Having used the work triangle to decide the overall layout of your kitchen, you need to think about
your main tasks and the ‘zones’ where you’ll carry them out. This will help you decide the type of
storage and appliances you need, and exactly where you should position them to ensure everything’s
just where you need it.
FOOD STORAGE ZONE
First, make sure you have enough storage space – for tins and packets, and all your fresh ingredients.
Then think about your shopping and cooking habits, and decide what type of units you need.
Also consider a worktop in this zone to make unpacking your shopping easier.
Idea: Larder units are perfect space savers for an optimum amount of storage.
CLEANING ZONE
As most kitchens today have a dishwasher, the sink is used more for preparing food than washing
up. So it needs to be close to your cooker for washing vegetables and draining rice or pasta, and
you’ll need a waste bin or recycling.
Idea: Lockable cleaning basket for safe storage of cleaning products and a swing-out waste bin for
simple and discreet recycling.
PREPARATION ZONE
The amount of work surface you need depends on how keen a cook you are. If possible, position
your surfaces near both the sink and the cooker, with your utensils stored close by in speciality base
unit storage.
Idea: Cutlery drawer inserts provide storage for crucial herbs, spices and utensils.
COOKING ZONE
You don’t want to have to go far with hot pans, so plan your oven and hob near the sink and work-
tops. You’ll also want your pans stored nearby, utensils close at hand and spices in easy reach.
Idea: Try a fi xed hanging rail and choose the accessories that best suit your lifestyle. Don’t forget
under-oven drawers can provide convenient well hidden additional storage.
FOOD STORAGE CLEANING ZONE PREPARATION ZONE COOKING ZONE
CONTENTS
STORAGE SYSTEMS PAGE 4
DRAWER SYSTEMS
IRONING BOARD
PAGE 18
PAGE 28
WASTE MANAGEMENT PAGE 32
LIFT AND TURN PAGE 38
SINKS AND TAPS PAGE 52
FURNITURE HANDLES AND KNOBS PAGE 56
STORAGE SYSTEMS
MAKE YOUR
SPACE WORK
HARDER
Ensure all your ingredients
are close to hand.
Larder Units are ideal for
your favourite ingredients
to be organised and seen,
solving the problem of
groceries being lost and
forgotten at the back of
the cupboard.
STORAGE SYSTEMS
Larder Unit Storage
6
EMS
ge
Saphir
Premea Artline
Available Basket Designs for the
Häfele Storage SolutionsPlease check the possible combination with us
7
Tall Cabinet DUSA• Height adjustable baskets inside the cabinet and
at the door
• No additional load on cabinet hinges
• Front frame supported by additional roller guides
• In opened position rear baskets extend up to 11
cm in front of the main cupboard section
• Integrated soft closing
• Installation Dimensions: 1900 - 2150 mm
• Load capacity: Basket 20 kg; Slide 80 kg
Article No. Description
Cabinet width 450 mm
547.29.205 DUSA 6 / Saphir
547.29.305 DUSA 6 / Premea Artline
Cabinet width 600 mm
547.29.225 DUSA 6 / Saphir
547.29.325 DUSA 6 / Premea Artline
STORAGE SYSTEMS
Larder Unit Storage
8
Tall Cabinet HSA• Height adjustable baskets assembly using
functional clip, fi rm grip and low noise
• Full extension with soft closing
• Load capacity: Fully extendable unit 120 kg
Tall Cabinet HSA Rotary• Upon opening, the baskets can be turned either
to the left or right
• Providing easy front access to the baskets
• Load capacity: Fully extendable unit 120 kg
Article No. Description
Cabinet width 600 mm
547.21.862 Height 1200 - 1450 mm
4 Baskets / Saphir
547.48.375 Height 1900 - 2150 mm
5 Baskets / Premea Artline
Cabinet width 400 - 450 mm
547.21.824 Height 1700 - 1950 mm
5 Baskets / Saphir
547.21.825 Height 1900 - 2150 mm
5 Baskets / Saphir
Cabinet width 450 mm
547.48.345 Height 1900 - 2150 mm
5 Baskets / Premea Artline
Optional accessories
547.23.298 Bottle Divider for 350 mm
Article No. Description
Cabinet width 400 - 450 mm
547.22.935 Height 1900 - 2150 mm
5 Baskets / Saphir
Cabinet width 450 mm
547.46.235 Height 1900 - 2150 mm
5 Baskets / Premea Artline
Cabinet width 600 mm
547.46.255 Height 1900 - 2150 mm
5 Baskets / Premea Artline
©
9
Recorner Maxx• Corner cabinet solution with distinctly better use
of storage space
• Height adjustment for the shelves is fl exible
• Retrofi tting possible
• Load capacity: 50 kg/ set
Article No. Description
Cabinet width 900 mm
542.62.522 Recorner Maxx 3/4
542.62.512 Recorner Maxx 4/4
Packing: 1 set includes 2 trays
©
Corner Unit Storage
STORAGE SYSTEMS
Corner Unit Storage
10
Slide Corner• The smart solution for corner cabinets that are
diffi cult to access
• The shelves can be pulled out separately
• The upper shelf can be assembled in various
heights
• Load capacity: 15 kg per shelf
Twin Corner• Allows optimal use of storage space in a corner
cabinet
• Easy access: a dual movement swings both
shelves out within grasp of the user
• Load capacity: 20 kg per shelf
Article No. Description
450 mm door width - Base cabinet
542.07.746 Slide Corner (2 tiers) for Left hand
542.07.745 Slide Corner (2 tiers) for Right hand
Optional Accessories
542.07.291 Centre Post
Article No. Description
450 mm door width
542.08.246 Twin Corner (Left)
542.08.245 Twin Corner (Right)
500 mm door width
542.08.251 Twin Corner (Left)
542.08.250 Twin Corner (Right)
11
Wari Corner• Wari Corner is easily accessible due to its user-
friendly movement
• Upon opening, the front baskets automatically
swing away and leave free access to the inside
baskets
• Integrated soft closing
• Load capacity per basket: Front 5 kg;
Rear 12.5 kg
Article No. Description
548.17.232 Wari Corner with Saphir basket
(Right)
548.17.233 Wari Corner with Saphir basket
(Left)
548.18.230 Wari Corner with Premea Artline
(Right)
548.18.231 Wari Corner with Premea Artline
(Left)
Base Cabinet DSA• Pull-out for 300 mm wide base cabinets
• The frame can be used on the left or right
• Height variable installation of the baskets with
secure locking device
• Full extension pull-out with soft closing
• Load capacity: 20 kg
Article No. Description
546.39.996 Side Pull-out Unit
546.39.243 DSA Baskets, Saphir Chrome
Optional accessories
546.35.299 Bottle Divider
Base Unit Storage
STORAGE SYSTEMS
Base Unit Storage
12
Base Cabinet Pull-Out K150• Pull-out for 150 mm wide cabinets
• Either with 2 fixed trays, towel holders or baking
tin holders
• Full extension with soft closing
• Load capacity: 12 kg
Article No. Description
Powder coated fi nish
545.12.961 Base Cabinet Pull-out -
2 Fixed Trays
545.12.911 Base Cabinet Pull-out -
Towel Holder
545.12.941 Base Cabinet Pull-out -
Baking Tin Holder
Optional accessories
545.12.290 Bottle Divider
Article No. Description
547.37.851 DSA Rotary (Left)
547.37.841 DSA Rotary (Right)
Base Cabinet DSA Rotary• Pull-out for 300 mm wide cabinets
• Height variable installation of the baskets with
secure basket locking
• Full extension pull-out with soft closing
• Load capacity: 20 kg
• 3 tiers basket
©
©
©
Harmonious kitchen arrangement
with DSA Rotary
Extended stove solution with
DSA Rotary
13
Article No. Description
450 mm cabinet width
548.01.203 Front Pull-out Basket
600 mm cabinet width
548.01.206 Front Pull-out Basket
900 mm cabinet width
548.01.209 Front Pull-out Basket
Optional accessories
548.01.999 Front Fastening Device, Left + Right
Set includes: 1 Basket and 1 Pair of runners.
Please order front fi xing accessories separately
Article No. Description
450 mm cabinet width
548.01.213 Pull-out Basket
600 mm cabinet width
548.01.216 Pull-out Basket
900 mm cabinet width
548.01.219 Front Pull-out Basket
Set includes: 1 Basket and 1 Pair of runners.
Front Pull-out Basket• The inner pull-out can be made into a front
pull-out by mounting the front attachment after
assembly
• Full extension pull-out with soft closing
• Installation dimensions: Height - 145 mm basket
height/ 185 mm with guide
• Baskets: Chrome RAL 9006, Clear varnish
• Load capacity: 30 kg
Pull-out Basket (For Hinged Door)• Full extension pull-out with soft closing
• Variant with spacing strip for installation behind a door
• Installation dimensions: Height 145 mm basket
height/ 160 mm with guide
• Basket/ Finish: Chrome RAL 9006, Clear varnish
• Load capacity: 30 kg
STORAGE SYSTEMS
Base Unit Storage
14
Wall Unit Storage
Base Cabinet Base Liner• Full extension with soft closing
• Fitting for heights 600 - 800 mm
• Load capacity: 40 kg
Wall Cabinet OSA• Wall pantry unit with automatic internal pull-out
• Installation dimensions: Height 500 - 700 mm
(Racks) Minimum cabinet width 460 mm
• Load capacity: 15 kg
Article No. Description
548.06.201 450 mm Cabinet width
548.06.203 600 mm Cabinet width
Article No. Description
500 mm cabinet width
545.99.241 Wall Cabinet OSA Baskets Chrome
15
Under Sink Pull-out Storage
Article No. Dimension
545.48.262 247mm (W) x 495mm (D) x 507mm (H)
Article No. Dimension
545.48.261 274mm (W) x 495mm (D) x 395mm (H)
Article No. Dimension
545.48.260 161mm (W) x 495mm (D) x 395mm (H)
Pull-out with 2 hook in baskets• Version : Bottle basket can be taken out
• Load Capacity : 12kg
Pull-out with 1 hook in basket• Version : Bottle basket can be taken out
• Load Capacity : 6kg
Pull-out with 2 hook in baskets and swing tray• Version : Bottle basket can be taken out, tray on top
can be swing from left to right
• Load Capacity : 15kg
STORAGE SYSTEMS
Under Sink Pull-out Storage
16
Article No. Dimension
545.48.248 202mm (W) x 432mm (D) x 440mm (H)
Article No. Description
545.48.238 Internal carcass width 140 mm
545.48.239 Internal carcass width 240 mm
Article No. Carcass width Basket (W x D x H) mm
540.32.262 500mm 415 x 425 x 148
540.32.263 600mm 515 x 425 x 148
Cleaning agent extension, lockable• Material : Steel
• Finish : Chrome Plated
• Suitable for left and right hand use
Extension for under sink• Material : Steel
• Finish : Chrome Plated
• Dimension : 470mm (D) x 420mm (H)
• Extension length : 335mm
• Suitable for left and right hand use
Pull Out Basket• Version : Runner and basket for internal pull out
with soft closing device
• Material : Stainless Steel
• Finish : Brush Polished
• Load Capacity : 30kg
• Installation Depth : 500mm
• Suitable for left and right hand use
17
Stainless Steel Rail• Material : Stainless steel with zinc alloy
rail holder
• Finish : Stainless steel polished
• Thickness: 1.2mm
Plate Organizer Racks• Shelf racks chromed
• Extensive use of the flat shelf
• Transparent collection tray
• Cabinet depth adjustable
• Load capacity: 15 kg per shelf
Kitchen Railing Systems
• Material: Stainless steel
• Finish : Stainless steel polished
Article No. Dimension
522.44.201 227 x 620 x 270 mm
Packing: 1 pc
Article No. Dimension
522.44.220 162 x 450 x 370 mm
Packing: 1 pc
Article No. Dimension
544.39.200 227 x 620 x 190 mm
Packing: 1 pc
Article No. Dimension
522.44.210 227 x 620 x 190 mm
Packing: 1 pc
Article No. Dimension
522.44.200 248 x 326 x 270 mm
Packing: 1 pc
Article No. Dimension
522.44.181 ø16 x 600 mm
522.44.184 ø16 x 1000 mm
522.44.185 ø16 x 1200 mm
Packing: 1 pc
Article No. Description
544.02.223 For cabinet width 600 mm
(564 mm inner width)
544.02.225 For cabinet width 900 mm
(864 mm inner width)
Plate Rack
Multipurpose Rack
DRAWER STORAGE SOLUTIONS
SMARTLY
INTEGRATED
STORAGE IDEAS
IDEAL FOR STORING ALL YOUR
COOKING ESSENTIALS AND UTENSILS
Organisation is the key
to a well run kitchen
and these drawer inserts
ensure that all your crucial
ingredients and cookware
are where you want
them to be.
DRAWER SYSTEMS
Individual Drawer Concepts
20
C
C
A
B
F
D
H
I
G
J
K
E
90° 90° 90°
New MOOVIT
Drawer System
• 2 trendy colours
• Extremely scratch-
resistant surface
• Soft and Self Closing
• Load bearing capacity
up to 50kg
• Tool free removeable
front panel for easy
cleaning
• Accessories to match
your design
NEW
21
Nominal length Article No./ Colour
Metalic White Metalic Grey
270mm 495.48.550 495.48.600
300mm 495.48.551 495.48.601
350mm 495.48.552 495.48.602
400mm 495.48.553 495.48.603
450mm 495.48.554 495.48.604
500mm 495.48.555 495.48.605
550mm 495.48.556 495.48.606
600mm 495.48.557 495.48.607
650mm 495.48.558 495.48.608
Packing: 1 set
Nominal length Article No./ Colour
Metalic White Metalic Grey
270mm 495.48.650 495.48.700
300mm 495.48.651 495.48.701
350mm 495.48.652 495.48.702
400mm 495.48.653 495.48.703
450mm 495.48.654 495.48.704
500mm 495.48.655 495.48.705
550mm 495.48.656 495.48.706
600mm 495.48.657 495.48.707
650mm 495.48.658 495.48.708
Packing: 1 set
Length Article No./ Colour
Metalic White Metalic Grey
For cabinet width 600 mm
488 mm 553.61.711 553.61.211
For cabinet width 900 mm
788 mm 553.61.715 553.61.215
For cabinet width 1200 mm
488 mm 553.61.719 553.61.219
Packing: 1 pc
Article No./ Colour
Metalic White Metalic Grey
553.61.792 553.61.292
Packing: 1 pair
Article No./ Colour
Metalic White Metalic Grey
553.61.791 553.61.291
Packing: 1 pair
Order reference
Please order Moovit equipment side rail set and cross
rail set separately.
Moovit Matrix Drawer Set Moovit Matrix set consists of:
• 1 left and right drawer side with rear panel
holder
• 1 left and right cabinet rail
• 2 cover caps
• 2 fixing brackets
Internal Drawer/ Extension + +
Holder for Internal Drawer without Railing
Holder for Internal Extension with RailingPanel for Internal Drawer/ Internal Extension• For internal drawer and internal extension
• Material: Aluminium
• Height: 95 mm
Aluminium panel and plastic holder available in the colour of
drawer sides
• Panel holder for internal drawer
connects the drawer sides with
the panel
• Material: Plastic
• For internal extension, connects
the drawer sides with the panel
and railing
• Material: Plastic
Metalic White Metalic Grey
Drawer height 92 mm Drawer height 115 mm
Add-On System
DRAWER SYSTEMS
Individual Drawer Concepts
22
Convenient and economical expansion of storage space in 3 simple steps:
Moovit drawer set
Moovit Equipment Railing + +
Moovit with railing Moovit with add-on panel
Add-On System
Cross rail
Cross rail
Side Rail Set Panel Add-on Drawer Sides
• Material: Steel
• Nominal length: 1200 mm
• Finish: Powder coated
• Diameter: 11 mm
• Material: Plastic
• Connecting piece for cross and side rail
• Railing: Steel
• Holder: Plastic
• Diameter: 11 mm
• Each set consists of:
2 x Rails with connection facility
2 x Front bracket for press fitting
2 x Front bracket for screw fixing
2 x Rear panel holder
• Material: Steel
• Installation: For clipping onto the
drawer side and railing
Article No./ Colour
Metalic White Metalic Grey
553.59.734 553.59.234
Packing: 1 pc
Article No./ Colour
Metalic White Metalic Grey
553.59.739 553.59.239
Packing: 1 pc
Nominal length Article No./ Colour
Metalic White Metalic Grey
300mm 553.60.701 553.60.201
350mm 553.60.702 553.60.202
400mm 553.60.703 553.60.203
450mm 553.60.704 553.60.204
500mm 553.60.705 553.60.205
550mm 553.60.706 553.60.206
600mm 553.60.707 553.60.207
650mm 553.60.708 553.60.208
Packing: 1 pair
Nominal length Article No./ Colour
Metalic White Metalic Grey
300mm 553.59.701 553.59.201
350mm 553.59.702 553.59.202
400mm 553.59.703 553.59.203
450mm 553.59.704 553.59.204
500mm 553.59.705 553.59.205
550mm 553.59.706 553.59.206
600mm 553.59.707 553.59.207
650mm 553.59.708 553.59.208
Packing: 1 set
23
Moovit Matrix Packages
Article No. Description
Metalic White Metalic Grey
553.48.715 553.48.705 Drawer side height 92 mm
553.48.745 553.48.735 Drawer side height 115 mm
Article No. Description
Metalic White Metalic Grey
553.48.775 553.48.765 Drawer side height 92 mm
553.48.805 553.48.795 Drawer side height 115 mm
Article No. Description
Metalic White Metalic Grey
553.48.835 553.48.825 Drawer side height 92 mm
553.48.865 553.48.855 Drawer side height 115 mm
Article No. Description
Metalic White Metalic Grey Drawer side height 92 mm
553.48.891 553.48.881 For cabinet width 600 mm
553.48.895 553.48.885 For cabinet width 900 mm
553.48.899 553.48.889 For cabinet width 1200 mm
Article No. Description
Metalic White Metalic Grey Drawer side height 92 mm
553.48.921 553.48.911 For cabinet width 600 mm
553.48.925 553.48.915 For cabinet width 900 mm
553.48.929 553.48.919 For cabinet width 1200 mm
Moovit Matrix set with single gallery
Moovit Matrix set with double gallery
Moovit Matrix set with add-on panel
Moovit Matrix internal drawer set
Moovit Matrix extended internal drawer set
DRAWER SYSTEMS
Individual Drawer Concepts
24
Cutlery Insert
Cutlery Insert
• Material: Translucent plastic with aluminium
edge
• Nominal length: 500 mm
• Side panel thickness 16 mm and 19 mm
• Material: Plastic
• Height: 50 mm
• Side panel thickness 16 mm
• Inserts are matching the colour of the drawer sides
For cabinet width Article No./ Colour
White Green Dark Champagne
Translucent Translucent Translucent
300mm 553.65.721 553.65.021 553.65.821
400mm 553.65.723 553.65.023 553.65.823
450mm 553.65.724 553.65.024 553.65.824
500mm 553.65.725 553.65.025 553.65.825
600mm 553.65.727 553.65.027 553.65.827
800mm 553.65.728 553.65.028 553.65.828
900mm 553.65.729 553.65.029 553.65.829
1000mm 553.65.730 553.65.030 553.65.830
1200mm 553.65.731 553.65.031 553.65.831
Packing: 1 pc
For cabinet width Article No./ Colour
Metalic White Metalic Grey Champagne
300mm 553.63.741 553.63.241 553.63.841
350mm 553.63.742 553.63.242 553.63.842
400mm 553.63.743 553.63.243 553.63.843
450mm 553.63.744 553.63.244 553.63.844
500mm 553.63.745 553.63.245 553.63.845
550mm 553.63.746 553.63.246 553.63.846
600mm 553.63.747 553.63.247 553.63.847
800mm 553.63.748 553.63.248 553.63.848
900mm 553.63.749 553.63.249 553.63.849
1000mm 553.63.750 553.63.250 553.63.850
1200mm 553.63.751 553.63.251 553.63.851
Packing: 1 pc
Compartments and confi guration overview
Compartments overview
25
Article No. Description
556.53.319 Divider, Self adhesive
Packing: 1 pc
Article No. Description
556.53.310 For nominal length 500 mm,
for 4 knives
Packing: 1 pc
Divider• Material: Multiplex beech
• Finish: Lacquered
Knife Block• Material: Multiplex beech
• Finish: Lacquered
Confi guration overview
Spice Jar with Glass Lid
• Suitable for spice jar insert
• Material: Glass - lead crystal
Article No. Description
556.53.311 Length 500 mm, for 6 spice jars
556.53.312 Length 500 mm, for 12 spice jars
Packing: 1 pc
+ Spice Jar Insert• Material: Multiplex beech
• Finish: Lacquered
• Hole diameter: 57 mm
Article No. Description
543.95.100 Height with lid 58mm,
Diameter (bottom) 55mm
Packing: 1pc
Wooden Drawer Inserts
Extension Tray, Narrow
Extension Tray, Wide
• Material: Beech/ Stainless steel
• Finish: Lacquered
• Connecting strips for drawer sides integrated
• Adjustment to suit cabinet width
• Height: 62 mm
• Width: 200 - 300 mm
• Height: 62 mm
• Width: 350 - 500 mm
Article No. Description
553.66.320 For nominal length 500 mm,
Depth 480 mm
Packing: 1pc
Article No. Description
553.66.321 For nominal length 500 mm,
Depth 480 mm
Packing: 1pc
A B C D E
F G H
I J
K
300 mm
550 mm
900 mm 1000 mm
1200 mm
600 mm 800 mm
350 mm 400 mm 450 mm 500 mm
1
2
3 4
DRAWER SYSTEMS
Individual Drawer Concepts
26
Article No. Description
Metalic White Metalic Grey
553.52.721 553.52.221 Side chassis (length 300 mm)
553.61.726 553.61.226 Faceplate with profi le (length 597 mm)
553.61.793 553.61.293 Faceplate holder (height 74 mm)
Article No. Description
553.67.307 Perforated board insert 500 x 480 x 9 mm
553.67.323 Dividers 480 x 120 x 8 mm
553.67.390 Triangle Rack 160mm
Article No. Description
556.81.573 3 pcs per set, White translucent
Article No. Description
547.91.571 Dimension: 1000 x 590 mm, Grey
Under Sink Drawer• For use of space underneath the sink
• Height: 92 mm
Wooden Inserts for Drawer• Material: Beech MDF
• For cabinet width 600 mm
Adjustable Divider for Drawer• Material: Plastic
• Version: With rubber knob against slide
• Dimension: 235-387 x 235-387 mm
• Height: 130 mm
Anti Slide Sheet• Material: Polystyrene - Natural rubber
• Version: Self adhesive
27
Pull-out Fittings
Step Stool
• For temporary extension work top ideal for small
compact kitchen
• Load bearing capacity 30 kg
• With 2 steps 200 x 300 mm and non-slip
rubber threads
Article No. Description
505.04.210 Stepstool (Silver/ Black)
505.04.419 Folding Bracket
Article No. Description
505.70.200 Version without work top
Article No. Dim. mm Finish/ Colour
547.96.567 510 x 600 Mat: Silver coloured grained,
547.96.577 810 x 600 Rubber strips: Black
547.96.167 510 x 600 Mat: Maple effect,
547.96.177 810 x 600 Rubber strips: Silver coloured
547.96.767 510 x 600 Mat: Wenge effect,
547.96.777 810 x 600 Rubber strips: Black
Article No. Length
808.90.090 300 mm
Packing: 6 pcs
Insert mat with strips• Material : Plastic
• Version : Insert mat with non-slip rubber strips, can be cut
to fit any length and width
Protection rails for worktops• Heat resistant and self adhesive
• Material: Zinc Alloy
• Finish: Stainless steel
Silver coloured
grained
Maple effect Wenge effect
IRONING BOARD
SPACE
SAVING
IDEAS
FOLD AWAY ACCESSORIES
These unique solutions allow you to fold
away kitchen utilities when they are not
in use, taking up minimal storage.
IRONING BOARD
Neat Space Saving Ideas
30
Ironfi x Pull-out ironing board
Ironfi x Foldaway ironing board
• Suitable for use with Moovit drawer side runner system
• Collapsible
• Material: Steel and aluminium
• Finish/ Colour: Plastic coated, grey
• With turning mechanism; swivel range 180°
• Can be locked in left, right or inclined position
• Material: Fitting parts: Steel
• Finish/ Colour: Fitting parts: Plastic coated, white
Article No. Description
568.60.964 Ironing Board
Article No. Description
568.66.700 Ironing Board
568.66.790 Hood
Internal drawer
width B Min. 498 mm Min. 406 mm Min. 506 mm
Internal drawer
opening depth T Min. 435 mm Min. 500 mm Min. 320 mm
Dim. H - Max. 155 mm Max. 155 mm
Dim. Y Min. 59 mm Min. 150 mm Min. 57 mm
Dim. X Min. 153 mm Min. 182/32 mm Min. 277/37 mm
(left/right) (left/right)
Overlay U Max. 38 mm Max. 25 mm Max. 38 mm
326
185950
300985
525
Covering hood
31
Ironfi x Built-in ironing board
Ironfi x Built-in lateral ironing board
• For installation in the drawer space of most standard base
cabinets
• When the drawer is opened the supports automatically extend
• Internal cabinet width required: 362-500mm
• Minimum cabinet depth required: 500 mm
• Material: Fitting parts: Steeel
• Finish/ Colour: Fitting parts: Plastic coated, white
• For installation in the drawer space of most standard base
cabinets
• Ironing board folds out, swivels 180° and can be positioned at
15° stages
• Internal cabinet width required: 520 mm
• Internal cabinet depth required: 350 mm
• Internal cabinet height required: 125 mm
• Material: Fitting parts: Steel
• Finish/ Colour: Fitting parts: Plastic coated, white
Article No. Description
568.60.710 Ironing Built-in ironing board with cover
Article No. Description
568.60.780 Ironing Built-in lateral ironing board
952
298.5
950
300
Simply pull the drawer open and
unfold the ironing board
WASTE MANAGEMENT
STYLISH
AND
COMPACT
CRUSH YOUR RECYCLING
TO A FIFTH OF ITS SIZE
Hygienic and effi cient recycling.
Being responsible to the
environment is important
for everyone and, what
with recycling becoming
mandatory in many
communities, it is crucial
to make recycling as
easy and time effi cient as
possible within the home.
WASTE MANAGEMENT
Tidy and Comfortable Disposal Solutions
34
Öko Liner Waste Solution System• Fast installation via built-in drilling template for slides
• Extendable, double powder-coated metal cover with
protective enamel
• With solt closing
• For 450 and 600 mm wide cabinets; more dimensions
available on request
Article No. Description
503.04.514 Öko Liner for cabinet width 450 mm
With 2 x 21 Litre bins
503.04.507 Öko Liner for Cabinet width 600 mm
With 2 x 10 Litre and 1 x 22 Litre bins
35
Double Waste Bin, 2 x 15 Litre
Double Waste Bin,
1 x 19 Litre, 1 x 30 Litre
Single Waste Bin, 15 Litre
Single Waste Bin, 40 Litre
Single Waste Bin, 20 Litre
• For cabinet width from 300mm
• Full extension (Ball bearing slides)
• Bracket: Steel plastic coated grey
• Installation: Screw fixing to bottom
• For cabinet width from 500mm
• Full extension (Ball bearing slides)
• Bracket: Steel plastic coated grey
• Installation: Screw fixing to bottom
• For cabinet width from 400mm
• For left and right hand door mounting
• Installation: Screw fixing to side panel
• For cabinet width from 400mm
• Full extension (Ball bearing slides)
• Bracket and extension: Steel
• Installation: Screw fixing to bottom
• For cabinet width from 400mm
• Finish: Galvanized bin (fire-retardant)
• For left and right hand door mounting
• Installation: Screw fixing to side and front panel
Article No. Description
502.70.252 Bin & Lid: Plastic Grey
Article No. Description
502.70.522 Bin & Lid: Plastic Grey
Article No. Description
502.12.023 Housing: Stainless steel
Bin: Light grey plastic
Lid: White plastic
Article No. Description
502.70.520 Bin & Lid: Plastic grey
Article No. Description
502.23.062 Housing: Stainless Steel,
Bin: Steel Galvanized
Lid: Aluminium polished
502.23.740 Housing: Steel, Plastic coated white,
Bin: Dark grey plastic;
Lid: Aluminium polished
WASTE MANAGEMENT
Tidy and Comfortable Disposal Solutions
36
SPACEBOY, 35 Litre
BASEBOY, 15 Litre
Material: Powder Coated Steel/ Stainless Steel
Dimension: 970 x 415 mm
Material: Powder Coated Steel/ Stainless Steel
Dimension: 535 x 362 mm
Article No. Finish
502.95.960 Red
502.95.260 New Silver
502.95.460 Almond
502.95.961 Orange
Article No. Finish
502.95.950 Red
502.95.051 Stainless Steel
502.95.951 Orange
37
KICKBOY CLASSIC LINE, 40 Litre
KICKMASTER, 33 Litre
Material: Powder Coated Steel/ Stainless Steel
Dimension: 750 x 430 mm
Material: Powder Coated Steel/ Stainless Steel
Dimension: 690 x 346 mm
Article No. Finish
502.95.970 Red
502.95.971 Orange
Article No. Finish
502.95.780 White
502.95.280 New Silver
502.95.180 Brown Chocolate
502.95.380 Black
LIFT AND TURN
IDEAS
IN MOTION
REDEFINED
With their modern design, the Häfele family
of fl ap fi ttings combine elegance and
fl exibility whilst retaining their comfort and
smooth functionality during use. Able to
integrate into the bathroom, home offi ce
and for niche applications.
LIFT AND TURN
Soft Closing Flap Fitting and Door Hinges
40
Free Flap 1.7
Adapter
Opening angle restraint
• For small, one-piece flaps made of wood or with aluminium frame
• 107º opening angle (can be reduced to 90º using opening angle
restraint, shown below)
• Flap locks into any position
• Integrated soft close
• Height, side and tilting angle adjustment of front ±1.5 mm holding
power
• Material: Fitting - Steel; Cover cap - Plastic
• Finish: Fitting - Nickel plated; Cover cap - Grey or White
• For flaps with 20 mm aluminium frame
• For left or right hand use
• Material: Zinc alloy
• For limiting opening angle of 107° to 90°
Model
Flat height
250 mm
275 mm
300 mm
325 mm
350 mm
375 mm
400 mm
Article No. Finish
372.91.599 Nickel plated
Article No. Finish
372.91.499 Plastic
Model Grey White
A 372.91.320 372.91.720
B 372.91.321 372.91.721
C 372.91.322 372.91.722
A
1.3-3.8
1.2-3.3
1.1-3.1
1.0-2.8
0.9-2.6
0.9-2.3
0.8-2.1
B
2.9-6.4
2.5-5.7
2.4-5.1
2.1-4.6
2.0-4.2
1.9-3.8
1.7-3.6
C
5.4-11.8
4.8-10.6
4.4-9.6
4.0-8.8
3.7-8.1
3.5-7.5
3.2-7.0
Flap weight kg
Sample measurements table for max. fl ap weight
Front panel thickness Y mm
16 mm 19 mm 22 mm 26 mm 28 mm
Distance X mm (with top panel thickness 16 mm)
83 mm 74 mm 64 mm 52 mm 46 mm
41
Free Flap 3.15
Adapter
• For flap height 400 - 600 mm
• For large, one-piece flaps made of wood or with aluminium frame
• 90º or 107º opening angle (adjustable on fitting)
• Integrated soft close
• Height, side and tilting angle adjustment of front ±1.5 mm holding
power
• Material: Fitting - Steel; Cover cap - Plastic
• Finish: Fitting - Nickel plated; Cover cap - Grey or White
• For flaps with 20 mm aluminium frame
• For left or right hand use
• Material: Zinc alloy
Model
Flat height
400 mm
425 mm
450 mm
475 mm
500 mm
525 mm
550 mm
575 mm
600 mm
Article No. Finish
372.91.599 Nickel plated
Model Grey White
D 372.91.330 372.91.730
E 372.91.331 372.91.731
F 372.91.332 372.91.732
G 372.91.333 372.91.733
D
4.7-9.6
4.4-9.0
4.1-8.4
3.9-8.0
3.7-7.5
3.5-7.1
3.3-6.8
3.2-6.5
3.0-6.2
E
5.9-12.4
5.6-11.6
5.2-10.9
4.7-10.3
4.7-9.7
4.4-9.2
4.2-8.8
4.0-8.4
3.8-8.0
F
8.9-18.6
8.3-17.4
7.8-16.3
7.4-15.4
7.0-14.6
6.6-13.9
6.3-13.2
6.0-12.5
5.7-12.0
G
11.8-23.3
11.0-21.8
10.4-20.5
9.8-19.3
9.2-18.3
8.8-17.3
8.3-16.5
8.0-15.6
7.6-15.0
Flap weight kg
Sample measurements table for max. fl ap weight
Front panel thickness Y mm
16 mm 19 mm 22 mm 26 mm 28 mm
Distance X mm (with top panel thickness 16 mm)
83 mm 74 mm 64 mm 52 mm 46 mm
LIFT AND TURN
Soft Closing Flap Fitting and Door Hinges
42
Maxi fl ap fi ttings
Maxi push-to-open Maxi handle mounting
• For flaps made of wood, glass or with aluminium frame
• Can be used on one or both sides (depending on the size of the
flap)
• Holding power can be adjusted individually to respective flap
weight
1. For particularly wide and heavy fronts with handle
2. Flap locks reliably in any position
3. Mounting in series drilled holes 32 mm (edge distance 37 or 28 mm)
4. Application in combination with concealed hinges with or without
automatic closing spring
5. Optional soft closing mechanism possible (recommended)
1. Slight pressure on the front opens the flap completely to the end
position
2. Application in combination with Duomatic Push concealed hinges
3. Flap is held closed by magnetic door catch and counterplate on the
front panel
4. Additional magnets for holding the flap closed (optional)
• The weight specification applies to one Maxi fitting. When using two Maxi fittings the flap weight values double
• Two Maxi fittings must be installed for flap widths of 600 mm and above
Holding power adjustment with SW10 Allen key (Cat. No. 008.28.100)
Opening angle 90°
> For use in combination with Duomatic Push hinges and magnetic
catches
Opening angle 90°
> Optional soft closing mechanism
Note:
Use numbers 1-8 for adjusting the holding power.
Use numbers 9-12 to re-adjust flap after a certain time (if necessary).
Cabinet heightmm
Flap weight kg
Model A Model B Model C Model D
1.7-2.4 3.1-4.6 3.8-7.0 5.8-9.8
- 2.4-3.7 3.1-5.5 4.2-7.1
- 1.6-2.9 2.6-4.5 3.4-5.8
- 1.5-2.4 2.1-3.6 2.9-4.8
- 1.2-2.1 1.5-3.2 2.5-4.0
- - 1.3-2.9 2.2-3.8
- - 1.1-2.6 1.9-3.3
- - - 1.6-3.0
300
400
500
600
700
800
900
1000
Cabinet heightmm
Flap weight kg
Model A Model B Model C Model D
3.0-5.3 5.1-10.2 9.1-15.8 11.9-20.8
2.3-4.0 3.8-7.6 6.9-11.9 8.9-15.6
1.8-3.2 3.1-6.1 5.5-9.6 7.2-12.5
1.5-2.7 2.6-5.1 4.6-7.9 6.0-10.4
1.3-2.2 2.1-4.2 3.8-6.6 4.9-8.7
1.1-2.0 1.9-3.9 3.4-5.9 4.4-7.8
1.0-1.8 1.7-3.4 3.0-5.2 3.9-6.9
0.6-1.6 1.5-3.0 2.7-4.7 3.6-6.2
300
400
500
600
700
800
900
1000
43
Soft-closing mechanism
Push magnetic door catch, for concealed fi xing
• For edge distance 37 mm
• Material: Zinc alloy
• For use with Maxi Touch opening 3675
• With magnet for holding in closed position
• For mounting in drilled hole in cabinet top or base, or with adapor housing shown below
• Material: Plastic
• Colour: beige
• Opening angles: 75°, 90° or 110°
• With power assisted opening
• Unhanded design
• Clip-mounting or pre-mounted screw fixing brackets included, no tools required
• Installation instructions included
• Height ±2 mm, side +3/-1 mm, tilt ±1.5 mm and holding power adjustment with SW10 Allen key facility
• Nickel-plated zinc alloy lid stay, nickel-plated steel screw-fixing brackets, plastic hinge cover and adjusting
screw
• Material: Stay: Zinc alloy
Mounting and screw on bracket: Steel
Cover cap for adjusting screw: Plastic
• Finish : Stay: Nickel plated, white or black
Mounting and screw on bracket: Nickel plated, white or black
Finishes -
Black, nickel
coloured or
white
Overview of
colour designa-
tion - (Adjusting
screw) for dif-
ferentiating the
models “A”, “B”,
“C” and “D”
1
23
4
567
89
10
1112
325
4020
4545
32
19.532
Wooden lid flap
5.5
16
Lid flap with aluminium frame
Model
A
B
C
D
A
B
C
D
Distance from
edge
37 mm
37 mm
37 mm
37 mm
37 mm
37 mm
37 mm
37 mm
White
373.69.742
373.69.744
373.69.746
373.69.748
-
-
-
-
Black
373.69.342
373.69.344
373.69.346
373.69.348
-
-
-
-
Nickel-
plated
373.69.512
373.69.412
373.69.712
373.69.312
373.69.502
373.69.402
373.69.702
373.69.302
Wooden fl aps and fl aps with aluminium frame,
from frame width 45 mm
Flaps with aluminium frame, frame width 20 mm
Article No. Installation
356.06.401 Counterplate for knocking in
356.06.402 Counterplate for glue fi xing
Article No. Finish
373.69.799 Nickel plated
3 .5
LIFT AND TURN
Soft Closing Flap Fitting and Door Hinges
44
Counterplate for knocking in Duo Standard/ Forte
Counterplate for knocking in
• Material: Steel
• For screw fixing to cabinet top or base
• Material: Plastic
• Colour: Beige
Finishes - Black,
nickel-coloured
or white
• Opening angles: 75°, 90°, 100°
• Unhanded design
• For use with wooden lids or lids with aluminium frames, also suit
able for use as flap stay
• For flaps with aluminium frame width 20 or from 45 mm
• With braking and locking mechanism, can be adjusted using an
SW4 hex key
• Self closing function
• Clip-mounting on pre-mounted screw fixing brackets, no tools
required
• Height, side and tilting angle adjustment of front ±1.5 mm
holding power
• Nickel-plated steel, cover caps: grey or white plastic
• Material: Stay: Zinc alloy
Bracket: Steel
• Finish : Stay: Nickel plated, white or black
Article No. Finish
246.08.910 Galvanized
Article No.
356.06.410 With positioning aid
356.06.420 Without positioning aid
With positioning aid
48 2.5
13.550 32
4.5
7
With positioning aid
48 2.5
13.550 32
4.5Without positioning aid
Holding power adjustment with SW4 Allen key (Cat. No. 008.28.241)
Stronger holding power= locking function= flap locks in any position
(multi-position stop)
Weaker holding power= braking function= lid stay closes softly/flap stayopens gently
Min. 135
Lateral space requirement/side distance (S) for screw-on bracket
Minimum installation depth
Duo Standard
S12
25
Min. 172
Duo Forte
45
Duo Standard fl ap/lid stay
Note:
When used as a flap stay, a magnet has to be fitted with an installation
height of 189 +32 mm and an outreach of 160 +32 mm
Light version - min. installation depth 130 mm
Maximum flap weight (kg)
Function locking Function braking Flap height
1 stay 2 stays 1 stay 2 stays
For opening angle 75º
0.515.110.510.9002
0.510.90.510.7052
0.515.70.210.6003
0.315.60.010.5053
5.110.60.95.4004
0.010.50.80.4054
0.95.40.75.3005
For opening angle 90º
0.515.90.515.7002
0.515.70.210.6052
0.310.60.010.5003
0.115.55.80.4053
0.010.50.75.3004
5.80.45.65.3054
0.80.40.60.3005
For opening angle 110º
0.510.80.210.6002
0.210.65.90.5052
0.010.50.80.4003
0.90.40.70.3053
5.70.40.60.3004
0.75.30.55.2054
0.60.30.50.2005
3 .5 5
Distance from
edge
37 mm
37mm
White
373.66.262
-
Black
373.66.212
-
Nickel-
plated
373.66.612
373.66.622
For wooden lids/ lids with aluminium frame,
frame width from 45 mm
For lids with aluninium frame, frame width from 20 mm
For sheet metal screws
Table showing maximum flap weight
Standard version shown
SW4
32132
75º32
160
28/37
19
19 90 32
90º
32
28/37
160
32
9219
110º
32
28/37
128
32
135
32110<400
28/37
90º
28/37
90º32
32141Max. 400
95
LIFT AND TURN
Soft Closing Flap Fitting and Door Hinges
46
Duo Forte fl ap/lid stay
Lid stay, heavy version
Opening angle Dim. A Dim. C
75º 224 mm 212 mm
90º 192 mm 182 mm
110º 160 mm 161 mm
Forte version shown
19 32
90º32
28/37
192
166
19
32
75º
32
28/37
224
196
28/37
32
90º32
Max. 600160
189
Installation as flap stay
Separate catch required
32
19
32110º
138
167
32
90º
32
28/37
Max. 600197
144
No separate catch required.Space required for fittinginside the cabinet when theflap is being closed:175 mm from front edge of cabinet
Maximum flap weight (kg)
Function locking Function braking
Flap height 1 stay 2 stays 1 stay 2 stays
For opening angle 75º
0.510.510.510.41002
0.510.510.515.11052
0.510.210.510.9003
0.510.110.510.8053
0.510.90.410.7004
0.510.85.210.6054
0.510.70.115.5005
0.315.60.010.5055
0.210.65.90.5006
0.115.55.80.4056
5.010.50.80.4007
For opening angle 90º
0.510.510.510.21002
0.510.210.515.9052
0.510.010.510.8003
0.510.95.310.7053
0.510.80.210.6004
0.410.70.110.5054
0.210.65.90.5005
0.115.55.80.4055
0.010.50.80.4006
5.90.50.75.3056
0.90.40.70.3007
For opening angle 110º
0.515.210.515.9002
0.510.010.515.7052
0.510.85.215.6003
0.410.70.115.5053
5.210.65.95.4004
0.115.55.80.4054
0.010.55.70.4005
0.90.40.75.3055
0.80.40.60.3006
5.70.45.50.3056
0.75.30.50.3007
3 .5 5
Heavy version - min. installation depth 175 mm
Table showing maximum flap weight
Distance from
edge
37 mm
37mm
White
373.66.372
-
Black
373.66.312
-
Nickel-
plated
373.66.632
373.66.642
For wooden lids/ lids with aluminium frame,
frame width from 45 mm
For lids with aluninium frame, frame width from 20 mm
For sheet metal screws
47
Senso Double fl ap lift up fi tting
K
96
3732
H
30
31
32
D13.5
>160
2**
R*
20
5
30
K
2** = Adjustable when usingadjustable connecting hinge
Opening angle
V
U
W
T
• For two-piece flaps - wood or with aluminium frame from 45 mm
• Height and side adjustment ±3 mm, holding, opening and centre
pull adjustment facility
• Material: Fitting: Plastic, Aluminium,
Cover cap: Plastic
• Finish/ Colour: Fitting: Silver coloured anodized
Cover cap: Grey
Flap Angle D H R T U V W
height
550 mm 101º 57.5 290 63.5 70 139 192 390
600 mm 101º 73.5 326 79.5 70 130 170 405
650 mm 103º 67.5 340 73.5 95 160 220 425
720 mm 102º 75.5 378 81.5 96 207 261 456
800 mm 100º 71.5 392 77.5 85 255 260 500
865 mm 102º 47.5 400 53.5 120 260 315 525
Installation dimensions (mm)
Flap height Flap weight Complete Set
540-580 mm 3.0-6.5 kg 372.64.601
6.0-12.0 kg 372.64.602
9.0-18.0 kg 372.64.603
12.0-24.5 kg 372.64.604
580-640 mm 3.0-6.0 kg 372.64.611
6.0-11.0 kg 372.64.612
9.0-17.0 kg 372.64.613
12.0-23.0 kg 372.64.614
640-700 mm 3.0-5.0 kg 372.64.621
5.0-10.0 kg 372.64.622
8.0-16.0 kg 372.64.623
10.5-21.5 kg 372.64.624
700-780 mm 3.5-5.5 kg 372.64.631
5.0-9.0 kg 372.64.632
7.0-15.0 kg 372.64.633
9.0-20.0 kg 372.64.634
780-840 mm 5.0-9.0 kg 372.64.642
7.0-13.0 kg 372.64.643
9.0-17.0 kg 372.64.644
840-900 mm 5.0-12.0 kg 372.64.653
7.5-16.0 kg 372.64.654
LIFT AND TURN
Soft Closing Flap Fitting and Door Hinges
48
49
32
30
14
1476
Drilling pattern
8
453220
Ø4M4
20
Finger protection
To avoid injuries the hinge comesapart when fingers get trapped unintentionally in the gap of the flap
Adapter for aluminium profi le
Connecting hinge Strato parallel lift up front fi tting
• For wooden flaps and flaps with aluminium frame, from frame width
20 mm
• 3-way adjustment: ± 2 mm side adjustment, -1 to +2 mm gap
adjustment, ± 1.5 mm depth adjustment
• With finger protection function
• Material: Zinc alloy
• Finish: Nickel plated
• For one-piece flaps made of wood or with aluminium frame
• Integrated soft close
• Height and side adjustment ±3 mm, tilt, holding power and
opening angle adjustment facility
• Requires 1x cross bar
• Material: Fitting: Plastic, aluminium
Cover cap: Plastic
• Finish/ Colour: Fitting: Silver coloured anodized
Cover cap: Grey
• For screw fixing to screw-on bracket 372.64.991
• For right and left hand use
• Material: Zinc alloy
segnih fo .oNhtdiw rood roF
2mm 006 otpU
3/2mm 008-006 neewteB
3mm 008 revO
Quantity of hinges required
Article No. Installation
372.64.796 Chipboard screws
Article No. Finish
372.64.995 Nickel plated
96
3240
V32
168
Min. 13855
323232
15.5
Y
K
W 21
S
Min. 33
X D
28
Min. 2
61
T
R
U
H
49
Cross bar
• For connecting both fitting components
• Side panel thickness W: 16/19 mm
Suitable for fl ap width Length Article No.
600 mm 477 mm 372.67.983
900 mm 777 mm 372.67.985
1200 mm 1077 mm 372.67.987
1500 mm 1377 mm 372.67.989
1800 mm 1677 mm 372.67.990
Flap X Y D H K R S T U V
height
342- 342 186 308 295 205 28 0.8 338 200 50
420 350 186 308 295 205 38 0.8 346 200 50
420 186 308 295 205 98 0.8 416 200 50
420- 420 255 380 395 271 5 1.2 414 265 37
500 450 255 380 395 271 35 1.2 444 265 37
500 255 380 395 271 85 1.2 494 265 37
500- 500 293.5 420 450 312.5 30 1.3 494 295 37
550 550 293.5 420 450 312.5 80 1.3 544 295 37
550- 550 313.5 440 480 332.5 50 1.3 544 315 37
650 600 313.5 440 480 332.5 100 1.3 594 315 37
600 313.5 440 480 332.5 150 1.3 644 315 37
Installation dimensions (mm)
Flap height Flap weight
342-420 mm 1.5-4.0 kg 372.68.831
4.0-7.2 kg 372.68.832
6.5-11.5 kg 372.68.833
420-500 mm 2.0-3.5 kg 372.68.801
3.5-7.0 kg 372.68.802
6.5-11.0 kg 372.68.803
8.0-16.0 kg 372.68.804
500-550 mm 3.8-10.0 kg 372.68.813
6.0-15.0 kg 372.68.814
550-650 mm 3.5-10.0 kg 372.68.823
6.0-14.5 kg 372.68.824
Article No.
Adapter
• For flaps with 20 mm aluminium frame
• For left or right hand use
• Material: Zinc alloy
Article No. Finish
372.91.599 Nickel plated
LIFT AND TURN
Soft Closing Flap Fitting and Door Hinges
50
Verso swing up front fi tting
• For one-piece flaps made of wood or with aluminium frame
• Height and side adjustment ±3 mm, tilt, holding power and
opening angle adjustment facility
• Requires 1x cross bar
• Material: Fitting: Plastic, Aluminium
Cover cap: Plastic
• Finish/ Colour: Fitting: Silver coloured anodized
Cover cap: Grey
168
40
96
37
32
32>13855
323232
255
15.5 61
K
28>33
>138
380
95
110
275
K
280
365
255
450
325
535
575
495
410
794
744694
644594
544494
444414
5540
1515
65
120145
40
Installation
Model A B C D
Flap height Flap weight (kg)
420-550 mm 2.0-4.0 4.0-8.0 6.0-10.0 8.0-17.0
550-650 mm 2.0-3.5 3.5-7.0 6.0-10.0 9.0-16.0
650-800 mm - 3.0-6.5 5.0-10.0 9.0-15.0
Sample measurements table for max. flap weight
Model Article. No.
A 372.67.801
B 372.67.802
C 372.67.803
D 372.67.804
Cross bar
• For connecting both fitting components
• Side panel thickness W: 16/19 mm
Suitable for fl ap width Length Article No.
600 mm 477 mm 372.67.983
900 mm 777 mm 372.67.985
1200 mm 1077 mm 372.67.987
1500 mm 1377 mm 372.67.989
1800 mm 1677 mm 372.67.990
51
• Door height: 1,200 mm
• Door width: 600 - 1,500 mm
• With integrated soft closing
• Door height: 1,200 mm
• Door width: 600 - 1,500 mm
• With integrated soft closing
Article No. Description
406.11.201 For 2 doors
Article No. Description
406.11.221 For 2 doors
Vorfront Wooden Sliding Door Fittings for
Base Units
Flatfront Wooden Sliding Door Fittings for
Wall Units
Adapter
• For flaps with 20 mm aluminium frame
• For left or right hand use
• Material: Zinc alloy
Article No. Finish
372.91.599 Nickel plated
SINKS AND TAPS
Being one of the most frequently used
areas in the kitchen, select your sink wisely
by also keeping in mind that a sink cannot
be exchanged so easily.
DISHWASHING
AT ITS
BEST
SINKS AND TAPS
Solid and Contemporary Sink and Faucet Combinations
54
• Material: Stainless steeel 304
• Finish: Satin
• Thickness: 1.2mm
• Inner corner with 10° radius
• 3 1/2” basket strainer, 1 1/2” Odour trap
Article No. Dimension
567.40.090 540 x 510 x 200 mm
Article No. Dimension
567.43.070 1000 x 470 x 200 mm
Article No. Dimension
567.43.140 567 x 430 x 220 mm
Article No. Dimension
567.43.150 740 x 430 x 220 mm
Article No. Dimension
567.40.080 820 x 510 x 200 mm
Top Mount Single Bowl
Undermount Single Bowl
Undermount Single Bowl
Undermount Single Bowl
Top Mount Single Bowl
Article No. Dimension
567.24.010 485 x 485 x 180 mm
Article No. Dimension
567.20.020 1020 x 500 x 180 mm
Article No. Dimension
567.20.040 505 x 505 x 180 mm
Article No. Dimension
567.20.030 820 x 500 x 180 mm
Top Mount Single Bowl Top Mount Single Bowl
Top Mount Single Bowl
Top Mount Single Bowl
5555
Article No. Description
485.61.002 Counter mounted
Article No. Description
485.61.003 Wall mounted
Article No. Description
495.50.002 Pre-rinse spray with
swivel sprout
Article No. Description
485.61.004 Counter mounted
Article No. Description
589.21.033 Zeta Sink Mixer
Article No. Description
589.04.335 Cold and hot water
mixer
Article No. Description
485.61.005 Wall mounted
Article No. Description
589.22.034 Mixer Faucet
Article No. Description
566.44.320 Cold and hot water
mixer
Cold Water Tap
Mixer
• Material: Stainless Steel
• Material: Brass
• With mixer for temperature
• With connection hose 450 mm and 3/8”
nut for easy installation
• Swivel sprout 180°• Material: Brass
• With connection hose 1/2”
• Material: Brass
• With connection hose 1/2”
• Swivel sprout 360°
FURNITURE HANDLES AND KNOBS
All the little and big helpers behind the cabinet doors do make a functional kitchen.
A nice handle or knob gives your kitchen the fi nal look. Get an insight of what can really
change the appearance of your kitchen.
GREAT
TO
OPEN
FURNITURE HANDLES AND KNOBS
For Great Looks And Openings
58
Article No.
110.34.706
110.34.707
110.34.306
110.34.307
Article No.
110.34.216
110.34.217
110.34.616
110.34.617
Article No.
106.69.276
106.69.277
106.69.676
106.69.677
Article No.
110.34.291
110.34.294
110.34.296
110.34.691
110.34.694
110.34.696
110.34.091
110.34.094
110.34.096
Article No.
110.34.271
110.34.274
110.34.277
110.34.279
110.34.671
110.34.674
110.34.677
110.34.679
Article No.
110.34.286
110.34.287
110.34.686
110.34.687
110.34.786
110.34.787
110.34.386
110.34.387
Article No.
110.34.236
110.34.238
110.34.636
110.34.638
110.34.337
110.34.339
110.34.336
110.34.338
Article No.
110.34.227
110.34.627
110.34.328
110.34.327
Article No.
110.35.276
110.35.279
110.35.676
110.35.679
110.35.776
110.35.779
110.35.376
110.35.379
Dim.
mm
170x28
202x28
170x28
202x28
Dim.
mm
196x30
228x30
196x30
228x30
Dim.
mm
172x34
204x34
172x34
204x34
Dim.
mm
42x40
106x40
170x40
42x40
106x40
170x40
42x40
106x40
170x40
Dim.
mm
40x24
104x24
199x24
263x24
40x24
104x24
199x24
263x24
Dim.
mm
180x28
212x28
180x28
212x28
180x28
212x28
180x28
212x28
Dim.
mm
180x26
244x26
180x26
244x26
180x26
244x26
180x26
244x26
Dim.
mm
215x30
215x30
215x30
215x30
Dim.
mm
220x30
380x30
220x30
380x30
220x30
380x30
220x30
380x30
Hole
centres.
mm
160
192
160
192
Hole
centres.
mm
160
192
160
192
Hole
centres.
mm
160
192
160
192
Hole
centres.
mm
32
96
160
32
96
160
32
96
160
Hole
centres.
mm
32
96
192
256
32
96
192
256
Hole
centres.
mm
160
192
160
192
160
192
160
192
Hole
centres.
mm
128/160
192/224
128/160
192/224
128/160
192/224
128/160
192/224
Hole
centres.
mm
160/192
160/192
160/192
160/192
Hole
centres.
mm
160
320
160
320
160
320
160
320
Finish
White,
matt
Black,
matt
Finish
Chrome
plated,
polished
Nickel
plated,
brushed
Finish
Chrome
plated,
polished
Nickel
plated,
brushed
Finish
Chrome
plated,
polished
Nickel
plated,
brushed
Iron
coloured,
used look
Finish
Chrome
plated,
polished
Nickel
plated,
brushed
Finish
Chrome plated,
polished
Nickel plated,
brushed
White, matt
Black, matt
Finish
Chrome plated,
polished
Nickel plated,
brushed
White, matt
Black, matt
Finish
Chrome plated,
polished
Nickel plated,
brushed
White, matt
Black, matt
Finish
Chrome plated,
polished
Nickel plated,
brushed
White, matt
Black, matt
• Material: Zinc Alloy
59
Article No.
106.69.267
106.69.268
106.69.667
106.69.668
Article No.
106.69.205
106.69.207
106.69.605
106.69.607
Article No.
110.35.281
110.35.286
110.35.681
110.35.686
Article No.
106.69.237
106.69.637
Article No.
110.35.271
110.35.671
110.35.771
110.35.371
Article No.
106.69.257
106.69.247
106.69.657
106.69.647
Article No.
106.69.217
106.69.617
106.69.227
106.69.627
Article No.
110.34.265
110.34.266
110.34.267
110.34.665
110.34.666
110.34.667
Article No.
110.34.255
110.34.257
110.34.655
110.34.657
110.34.356
110.34.358
110.34.355
110.34.357
Dim.
mm
227x35
355x35
227x35
355x35
Dim.
mm
148x32
212x32
148x32
212x32
Dim.
mm
80x24
220x24
80x24
220x24
Dim.
mm
201x32
201x32
Dim.
mm
31
31
31
31
Dim.
mm
218x32
218x32
218x32
218x32
Dim.
mm
202x30
202x30
202x30
202x30
Dim.
mm
146x28
178x28
210x28
146x28
178x28
210x28
Dim.
mm
172x32
204x32
172x32
204x32
172x32
204x32
172x32
204x32
Hole
centres.
mm
192
320
192
320
Hole
centres.
mm
128
192
128
192
Hole
centres.
mm
32
128/160
32
128/160
Hole
centres.
mm
192
192
Diameter
mm
20
20
20
20
Hole
centres.
mm
192
192
192
192
Hole
centres.
mm
192
192
192
192
Hole
centres.
mm
128
160
192
128
160
192
Hole
centres.
mm
128/160
160/192
128/160
160/192
128/160
160/192
128/160
160/192
Finish
Chrome
plated,
polished
Nickel
plated,
brushed
Finish
Chrome
plated,
polished
Nickel
plated,
brushed
Finish
Chrome
plated,
polished
Stainless
steel
coloured
Finish
Chrome
plated,
polished
Nickel
plated,
brushed
Finish
Chrome plated,
polished
Nickel plated,
brushed
White, matt
Black, matt
Finish
Chrome plated
polished, white
Chrome plated
polished, black
Nickel plated
brushed, white
Nickel plated
brushed, black
Finish
Chrome plated
polished, white
Nickel plated
brushed, white
Chrome plated
polished, black
Nickel plated
brushed, black
Finish
Chrome plated,
polished
Nickel plated,
brushed
Finish
Chrome plated,
polished
Nickel plated,
brushed
White,
matt
Black,
matt
• Material: Zinc Alloy
• Material: Aluminium
www.hafele.com.my
Häfele Malaysia Sdn Bhd
KL Head Office & Showroom
No. 18, Jalan Juruhebah U1/50. Seksyen U1, Temasya Industrial Park, 40150 Shah Alam, Selangor, Malaysia
Tel: +603 5569 2526 | Fax: +603 5569 3526 | Email: [email protected]
Sabah Office & Showroom
Lot 5 & 7, Ground Floor, Wisma KKM, MIle 5, Jalan Tuaran, 88450 Kota Kinabalu, Sabah, Malaysia
Tel: +6088 380 533 | Fax: +6088 386 533 | Email: [email protected]
732.99.00036
Specifications are subject to change without prior notice.
Published by Häfele (Malaysia) Sdn Bhd
March 2014