About Amko 2 ~ 6
Structure 7 ~ 13
Induction Lighting 14 ~ 17
Green Lighting 18 ~ 19
Case Study 20 ~ 28
INDEX
Comparison 29
Product Range for SOLARA and LUNARA Induction Lighting Systems 30 ~ 31
Installation 32
2007-2008
SOLARA & LUNARAInduction Lighting Systems
SOLARA & LUNARA 3
What would be your reason to bemore environmental?
For greener grass, for cleaner air, and for a safer place, the world is choosing to be more responsible in energy use by switching to induction lights.
Introducing SOLARA and LUNARA Induction Lighting Systems, a new lamp technology that saves more energy and lasts many times longer than compact fluorescent lamps. Without electrodes, the lamp requires no mainte-nance and changing for twenty years.*
Imagine what our environment can benefit from it.
*Assuming 60,000 hours service life, lit 8 hours daily , 365 days per year.
• AMKO Lighting Division was created in 2005 to market and distribute our induction lighting system following ten years of research and development with some of the best universities and institutions in Asia. We put together a focused effort to gain awareness and go-to-market. • Within our group of subsidiaries, we are one of the top ten lighting equipment manufacturer in China with more than thirty years of OEM experience in automotive parts, material handling supplies, and electrical lighting equipment. We are amongst the most established global induction lighting manufacturers, but uniquely vertically integrated to produce the most critical components internally.• In our lighting businesses, we manufacture induction lamps, metal halide lamps, ceramic metal halide lamps, high pressure mercury and sodium lamps, magnetic and electronic ballasts, capacitors, gear boxes and light fixtures.
Amko designs and manufactures high performance lighting and luminaires for specialized environments, using next generation lighting products that set the benchmarks in areas such as energy efficiency, lifespan, and environmental friendliness.For hazardous areas, extremely controlled spaces, remote or inaccessible places, and governmental projects in industrialized or developing countries with a high degree of energy regulations (LEED or energy shortage).Lead the industry in innovation, professionalism and technology superiority.
OAS Statement
AMKO Lighting Division
1976 • Amko Industrial Co., Ltd. founded in Taipei, Taiwan
Celebrating 30 Years of Excellence
1984 • Fujian Nanping Electronic Ltd. Founded in Fujian province, China
1995 • Fujian JK Yaming was established as a partnership between Malaysia Juan Kuang, Nanping, and Shanghai Yaming
2001 • JK Yaming successfully listed on Singapore Stock Exchange with registered capital of USD$23,000,000
1997 • Through private placement, Amko became a major shareholder of FJK Yaming
1999 • JK Yaming International Holdings Ltd. Is established in Singapore
2002 • Shanghai Juan Ya Lighting System Co., Ltd. • Private investment into Fujian Minhang Electronic Ltd.
2003 • National Post Doctoral Research Station • Fujian JK Metal Industries Co. Ltd. • Anhui Juan Kuang Electric Co., Ltd.
2005 • Amko Lighting Division established • Domestic marketing and sales in Taiwan
2006 • SOLARA induction lamp gains popularity during Hong Kong, Taiwan, UAE, UK and Milan trade shows
2007 • Building a network of global distributors and marketing the product through multiple channels
ABOUT AMKO 5
• Internal UL Certified TMP (Testing at Manufacturer’s Premises) and Fixture Temperature Laboratory, China• EMC and Electrical Lighting Laboratory, Taiwan• Anti-Explosion Laboratory, Taiwan (certification scheduled 10/2007)• EMC Laboratory, Taiwan
Additional / 3rd Party Quality Assurance Facility Investments:
AMKO Group
• China Illumination Engineering Society• The Illumination Engineering Society of Taiwan• Taiwan Lighting Fixture Export Association• Sponsoring Member, 26th Session of the CIE, 2007 Beijing
Industry Associations:
Amko Group (Taiwan) / JK Sdn (Malaysia)Nanping Electric (China) / Phihong (Taiwan)
Group Organization Chart
Amko LightingCompany, Ltd.
Organization Chart
Juan Kuan Yaming International Holdings Limited
Majore Shareholders
PublicCompany
Subsidiaries
Subsidiaries
Subsidiaries
Accounting andERP
Marketing andInternet
Sales(Domestic)
Sales (International) Product Manager
ProjectBased
DistributorBased
General Distribution
Project BasedBusiness
Development
CorporatePartnership
QualityAssurance Engineering Operation
Testing andInspection
Product Develpement Warehousing
QualityProgram
Service and Maintenance Purchasing
FJKYM
MHDZ
JKM
SHDJ
SHCT
AHJK
JKE
JKW
JKT/SHT
ABOUT AMKO 7
• Implement distributor program
• More alliance with complimentary products
• Solve more customer “PAINS” and build case studies
• Expand product offering
• Increase manufacturing capacity
• Increase certification of products
• Implement TPM at production
• ERP integration with web platform, SEO implementation and other advertisements
Short Term
• Implement web based distributor platform
• Investments into complimentary product partners
• Put together a portfolio of “solved PAINS” for knowledge management
• Rationalize production with Activity Based Costing
• Receive certification for all products
• ISO 14000 certification, TQM and FM Approval
• Middle manager training
Mid Term
• Build stronger distributor relationships
• Integration of joint R&D efforts
• Focus on the communication of the innovation and technology behind our brand
• Sustain mass customization production
• Setting the standards for induction lighting products
• Self governed environmental policies
• Retain the best employees
• VPN and security enhanced networks for all users
Long Term
Strategic Goals
Finished Products QC Center Flow Chart
AMKO Quality Control Center Structure
QA Check QA Check
QA Check
QC Inspection
Appearance Inspection
Appearance Repair Operation
Repair Operation
QE OutGoing Audition
In-coming Material
Material Storage
Material Inspection
Lighting Testing
Lamp Tube Inspection
Function Testing
Ballast Inspection
Appearance Inspection
Aging 48 hours
Function Testing
Finished Products Storage
Finished Products Shipment
QA Check
Quality Control Center
Quality Assurance Quality ControlQuality Engineering
Reliability AssessmentData Statistics Quality AuditionQuality Planning Material InspectionFinished Products Inspection
Procurement
STRUCTURE 9
AMKO Finished Product - Inventory Inspection Flow Chart
Product Packaging
Finished Products Sampling Inspection
Inspection Report
Qualified Disqualified
Inventory Manager’s Approval
Returned Work
Second Inspection
Qualified Disqualified
Disqualified Product Separation and Reasons Analysis
Inventory
AMKO Finished Product — Shipment Inspection Flow Chart
Inventory
Finished Products Sampling Inspection
Inspection Report
Qualified
Shipment
Disqualified
Manager’s Approval
Returned Work
Second Inspection
Qualified Disqualified
Disqualified Product Separation and Reasons Analysis
Shipment
AMKO Finished Product — Shipment Inspection Flow Chart
Client’sComplaint
AMKO Client’s Complaint Handling Flow Chart
Customer Care Team(Quality/Quantity)
Finding and Analyzing the
reasons
Finding KeyFactors of
the Reasons
CorrectiveAction Plan
SolutionExecution &ComplaintElimination
Customer CareTeam Trackingand Inspection
ConsistentCorrection
Clients
MessageFeedback and
PreventionPlans
STRUCTURE 11
AMKO Disqualified Products Control
Products Screen and Test
Products from Normal Inspection Process
Final Products Inspection
Returned Disqualified Products
Disposal Execution Notification Disposal
Return Work& Repair Withdraw
Acceptance On Deviation
Returned roducts Rejection
Procedure QC
Disqualified QC Process
Defined Area/Disqualified Turnover Box
Labeling Separation Record Keeping
Normal -> QCReportAbnormal -> QualityJudgment
Normal -> Procedure QC ReportAbnormal -> Quality Analysis and Correction
* Normal -> QC Judgement* Abnormal -> Quality Judgment
Quality and Related Depts. Analysis and Correction
Abnormal Quality Process Notes
Judgment
Disqualified Products from Inspection Process & Test
Final Inspection & Disqualified Test
Inspection Equipments at our Facilities
• UV-VIS-NIR spectroradiometers for photobiological safety analyser• Integrating Sphere - Diameter:Φ1500mm & Φ1000mm• Digital CC & CV DC Power Supply• Digital Power Meter (Harmonic analyzer)• Aging controller
STRUCTURE 13
Phosphor Powder
EMI Shielding
Visible Light
Glass Bulb
Bulb Interior
High FerquencyMagnetic Field
Electer Magnet
a
bc
Aside from the method of coupling energy into the mercury vapor, these lamps are very similar to conventional fluorescent lamps. Mercury vapor in the dis-charge vessel is electrically excited to produce short-wave ultraviolet light, which then excites the phosphors to produce visible light. While still relatively unknown to the public, these lamps have been available since 1990.
The most common form has the shape of an incandescent light bulb. Unlike an incandescent lamp or conventional fluorescent lamps, there is no electrical con-nection going inside the glass bulb; the energy is transferred through the glass envelope solely by electromagnetic induction.In the most common form, a glass tube (B) protrudes bulb-wards from the bottom of the discharge vessel (A). This tube contains an antenna called a power coupler, which consists of a coil wound over tubular ferrite core.
In lower-frequency versions of induction systems, the lamp consists of two long parallel glass tubes, connected by two short tubes that have coils mounted around them. The antenna coils receive electric power from the electronic ballast (C) that generates a high frequency. The exact frequency varies with lamp design, but popular examples include 13.6 MHz, 2.65 MHz and 250 kHz (in physically large lamps). A special resonant circuit in the ballast produces an initial high voltage on the coil to start a gas discharge; thereafter the voltage is reduced to normal running level.
The system can be seen as a type of transformer, with the power coupler forming the primary coil and the gas discharge arc in the bulb forming the one-turn secondary coil and the load of the transformer. The ballast is connected to mains electricity, and is generally designed to operate on voltages between 100 and 277 VAC at a frequency of 50 or 60 Hz. Most ballasts can also be connected to DC voltage sources like batteries for emergency lighting purposes.
In other conventional gas discharge lamps, the electrodes are the part with the shortest life, limiting the lamp lifespan severely. Since an induction lamp has no electrodes, it can have a very long service life. For induction lamp systems with separate ballast, the service life can be as long as 100,000 hours, which is 11.4 years continuous operation, or 22.8 years used at night or day only. For induction lamps with integrated ballast, the life is 15,000 to 30,000 hours. Extremely high-quality electronic circuits are needed for the ballast to attain such a long service life. Such expensive lamps have special application areas in situations where replacement costs are high.
Research on electrodeless lamps continues, with variations in operating frequency, lamp shape, the induction coils and other design parameters. Low public awareness and relatively high prices have so far kept the use of such lamps highly specialized. With our proprietary design, AMKO’s SOLARA induction lights are dimmable down to 30%.
How Does Induction Lighting Operate?
INDUCTION LIGHTING 15
• Long Service Life: up to 100,000hrs • Energy Saving:save up to 40% compared to metal halides, 13 times more efficient than incandescent light bulbs, and up to twice as efficient as compact fluorescent lights • Instant On/Off:no waiting time between re-strike • High Efficiency: lighting efficiency >80lm/w • High Lumens Maintenance: >70% after 60,000 hrs • High Color Rendering Index: Ra≧ 80 • Flexible Voltage Range : fixed voltage ±20%, wattage deviation within 3% • Wide Selection of Color Temperature:2720K- 6500K • High Power Factor Ballast: λ>0.95• Low Total Harmonic Distortion:THD < 5% • Flicker-free : high frequency (250KHz) creates a better and more comfortable light for users and prevents eye injury when viewed directly • Wide Temperature Tolerance: can operate between -40 ℃ ~ +50 ℃• Optional Dimmable Ballast for Integrated Control: linearly dimmable to 30% • Green Lighting Product: Amalgam adopted, 99.0% recycled
Main Features of SOLARA Induction Lighting System
UL Approval CertificationUnited State Patent
1. Philips’ QL lamp has a maximum output of 165W while SOLARA has a 200W maximum output. The unique design in wiring and heat dissipation ensures high stability, and this lamp is commonly used in factory lighting fixtures, parks and street lighting, as well as projecting light fixtures.
2. Osram’s Endura lamp has a maximum output of 200W while SOLARA has 250W, 300W, and 400W lamps that are more effective in high ceiling work shops, tunnels, emergency lighting, and anti-explosion lighting fixtures.
3. Our latest self ballasted SOLARA lamp combines the lamp and electronic ballast together in a reduced size for easier installation and replacement to existing fixtures with socket types E26, E27, E39 or E40.
4. We can customize the material and components to achieve a range of lumens output according to customer’s specific requirements.
Comparison of Electrodeless Induction LampsAmko SOLARA v. Philips’ QL and Osram’s Endura (Icetron):
INDUCTION LIGHTING 17
Installing SOLARA induction lamp can significantly reduce the amount of waste of used light tubes and bulbs (inclusive of packaging and shipping), and save on energy costs. Using one 400W SOLARA lamp is the equivalent of the following substitution:
GREEN LIGHTING – Environmentally Friendly
Mercury Vapor x 20
High Power U CFL x 50T5 FL x 108
Metal Halide x 25Incandescent x 1067 T8 FL x 500
SOLARA x 1GREEN LIGHTING 19
Turning our feature into your Competitive Advantage
The best maintenance service is no maintenance needed. The planned installation of SOLARA induction lights across 80 office buildings helps reduce maintenance costs by over 60% and energy savings up to 50% over compact fluorescent lamps. With a service lifespan over 50,000 hours, you won’t see another janitor changing a light tube for 5 years.*
*Assuming 24 hours all around lit time for public areas.
The Company owns and operates 80 office buildings in Liverpool, Warrington, Manchester, Leeds, and Birmingham with over 800 customers. The company is also a recognized developer in the regions they operate as a part of the continual enhancement of the region. “Unlike most other property companies we don’t outsource any core part of our business. We employ dedicated Customer Service Teams at our buildings, who operate as general managers for the building, with full responsibility for all day-to-day operations and customer satisfaction.The team will welcome both you and your customers to the building. They hold regular customer forums and 1:1’s to ensure their customer’s needs are being met and deal with all of the maintenance issues at the building, leaving our customers free to get on with their business. These people are invaluable to our business but more importantly they are invaluable to our customers, whose testimonials appear throughout this website.”
UK Serviced Office Provider
• SOLARA Induction Lighting System is planned to replace the current outdoor building signage which uses fluorescent light tubes. • The current solution requires maintenance onsite on average every 18 months using a crane and between three to four contractors. The costs associated to maintenance starts from £1,500 to £3,500 depending on the location and the time required for the job. • Replacing the fluorescent light tubes with SOLARA induction lamps will reduced the required maintenance cycle to once every 48 months (proposed) and we wish to reach the ideal target of once every 60 months. This will reduced the work required by more than 60%.• The second phase of replacement is planned for the indoor fixtures, where our new 250W thin tube is employed with reflector fixtures to give a bright, but elegant and natural light to the interior. This solution will be coupled with a centralized dimming system that can be paired with a schedule timer or photo sensors to maximize energy efficiency during daylight hours.• We currently have two other corporate customers that are also looking into the signage replacement who are in the fast food and petro-station retail business. We have developed a new 300W round tube that will fit their signage more effectively, satisfying their lumens output requirement and light distribution inside the fixture. This customized lamp will not be available to everyone until the end of 2007.
Customized Solution
CASE STUDY 21
The highest class of racing demandsthe most reliability and flexibility
Race control lies at the very heart of every racing event, monitoring and supervising all stages of the practice, qualifying, and race sessions. Facilities vary between different circuits, but all require features essential to allowing the Race Director and his staff to make the right decisions to keep things safe, legal and to schedule.
CASE STUDY 23
The Committee conducts and manages the world’s most renowned racing event and the highest class of auto racing, that are held usually on purpose-built circuits, and in a few cases on closed city streets. There are 17 races in 2007, 9 are outside Europe.“During a [Race] weekend, race control lies at the very heart of [the Committee], responsible for monitoring and supervising all stages of the practice, qualifying and race sessions. Facilities vary between different circuits, but all will have several key features essential to allowing the [Committee] Race Director and his staff to make the right decisions to keep things safe, legal and to schedule.”
International Racing Event Committee
• SOLARA Induction Lighting System is used inside the Race Control Facilities as their backup lighting system.• The Committee travels to 17 different locations for this racing season, and sometimes they find the location’s race control facility to be inadequate and lacking. They approached our distributor for a solution. • The traveling made traditional arc lighting solutions difficult as it may damage the light source during shipping. Currently available fluorescent light sources are limited in output and size. Our 400W SOLARA induction lamp was up for the job to provide a reliable, mobile and high output light source.• The lamps were supplied with our tunnel lighting fixture with a IP 65 rating. We even made the airline travel case to go with the complete system for the customer, and the shipment was sent directly to the Committee’s next racing venue.
Customized Solution
How do you continue expansion in the face of energy shortage?
With over 20,000 tunnel lamps already installed in China’s newly constructed highways, we’ve helped reduce the energy need to support the massive expansion of the nation’s transportation
infrastructure and the overhead of future maintenance expenses. Our battery equipped emergency lighting option makes installation much easier without additional wiring and backup generators.
The Province wanted a reliable and long life lighting solution for the numerous tunnels constructed along the new highway linking Fuzhou and Beijing via Jinan, Xuzhou, Nanjing, Hangzhou and Taizhou.It runs to approximately 2,390 km, and, on a map, runs southeast towards Nanjing and Hangzhou before turning south-southwest at Taizhou.In the Fujian province, there are 13 tunnels of various lengths, including the Meihuling Tunnel of 5.6km long, currently the longest highway tunnel constructed in the country.
China Fujian Province Highway Tunnel Project
• Our subsidiary company that handles domestic sales and distribution, FJK, provided tunnel fixtures and emergency lighting fixtures to the province.• Induction lamps are very suitable for tunnel lighting because it offered the benefits of • Long service life • Lowered maintenance • Less damage due to vibration from passing traffic • Better illumination and distribution • Lowered installation cost and material • Color temperature from 3000K to 5000K• Our emergency lighting fixture comes with a battery inside the fixture, and can switch immediately from AC to DC power in the event of a cutoff in electricity. It provided the additional benefits of • Eliminating the need of a secondary backup lighting system (CFL or LED), thereby makes redundant wiring and routine check up of the backup system unnecessary • Instant on/off provides no disruption in service – offering absolute safety to the drivers and operators • Individual batteries makes installation easy
Customized Solution
CASE STUDY 25
The Hotel was recently acquired by a prominent businessman in Malaysia with the intention of reno-vating it into a modernized boutique hotel targeted for tourists and personal use.The property sits on three acres of hillside land and houses 350 rooms, with 200 more planned for the new wing expansion. “We plan to charge USD$40 to $50 per night for the budget tourist who does not need the ameni-ties of a spa and swimming pool since we are situated so near to beaches and nearby islands. We need to find ways to keep costs to a minimum and keep a high turnover rate to maximize the operation of the hotel.”
Hotel Renovation and New Wing Construction in Malaysia
• SOLARA Induction Lighting System is planned for exterior and interior lighting of the hotel.• Induction lamps will be placed at the hotel lobby and entrance with high ceilings, while CFL’s are to be installed in the hallways and the rooms.• Induction lamps are planned for the building’s exterior lighting as floodlights for the Hotel’s corners and exterior walls at the ground level. Our self-ballasted 40W lamp with E26 socket can be easily installed on the landscaping, providing light to the path walks. • SOLARA induction lamps are also planned for the proposed indoor 24 hours parking lighting with dim mable ballasts paired with motion sensors. The lamps will be dimmed to 50% normally and increased to 100% when the sensor picks up motion. The long service life also reduced the maintenance cost.
Customized Solution
CASE STUDY 27
The Company is the forefront and award winning leader in the design and production of Automated Visual Inspection Systems employed by many high tech industries such as semiconductor manufacturing, LCD panel makers, and PCB manufacturers.“We use the technologies of pattern recognition, artificial intelligence and neural network to combine optics, hardware and signal processor for “Machine Vision“
The ability of Machine Vision is much better than human’s eyes in high speed and detailed measurement aspects. Machine Vision can produce the same quality as human’s eyes and lasts longer.”
Taiwan Inspection Equipment Manufacturer
• SOLARA Induction Lighting System is replacing the main inspection lamps used inside the equipment currently supplied by a German competitor.• The current solution requires an engineer visit when one or multiple lamps failed. The equipment carries a three to five year warranty and the lamps are installed inside the equipment, requiring a qualified internal engineer to go onsite for lamp replacement. The costs to the company varies from 5,000 NTD to 25,000 NTD depending the customer location, where in some cases, international travel is required.• Replacing the competitors’ product with SOLARA induction lamps will effectively fulfill the equipment’s multi-year warranty completely, therefore reducing engineer visits due to lamp defects to nearly zero.• The German competitor also offered to the Company a similar induction lamp. But when reviewed by the Company, their product was found to have a lower than required lumens output and a more than expected price premium. • Amko actually provided the Company with a custom specification lamp where the emphasis, as requested by one of the Company’s technical engi neer during one of our earlier visits, was placed on achieving >92 lm/W for the lamp.
Customized Solution
COMPARISON 29
LUNARA 40W Mercury Vapor 40W
Luminance (lm) 2,680 1,400
Wattage (W) 42 51
Lifetime (H) 100,000 6,000
SOLARA RT250W Mercury Vapor 250W
Luminance (lm) 21,750 12,700
Wattage (W) 263 260
Lifetime (H) 100,000 12,000
SOLARA ST100W Mercury Vapor 100W
Luminance (lm) 7,700 4,200
Wattage (W) 110 114
Lifetime (H) 100,000 12,000
SOLARA ST400W Mercury Vapor 400W
Luminance (lm) 34,800 22,000
Wattage (W) 420 415
Lifetime (H) 100,000 12,000
90% up
70lm/W
36.8lm/W
56% up
82.9lm/W
53.0lm/W69% up
82.7lm/W
48.8lm/W
63.8lm/W
132% up27.5lm/W
High Efficiency and Saving More Energy
LUNARA 40W VS. Mercury Vapor 40W
LUNARA SOLARA
SOLARA SOLARA
MV MV
MV MV
SOLARA 250W VS. Mercury Vapor 250W SOLARA 400W VS. Mercury Vapor 400W
SOLARA 100W VS. Mercury Vapor 100W
SOLARA Range
ItemWattage
(W)Luminance
(Lm)CRI(Ra)
Color Temperature(K)
Current(A)
Input Power (W)
Round Tubular
70 5040
≧80 3000/4000/5000
0.63 ~ 0.29 75
100 7700 0.93 ~ 0.42 110
150 11550 1.35 ~ 0.61 160
200 16400 1.77 ~ 0.80 210
250 21750 2.21 ~ 1.00 263
ItemWattage
(W)Luminance
(Lm)CRI(Ra)
Color Temperature(K)
Current(A)
Input Power (W)
Square Tubular
70 5040
≧80 3000/4000/5000
0.63~0.29 75
100 7700 0.93~0.42 110
150 11500 1.35~0.61 160
200(φ54) 16400 1.77~0.80 210
250(φ38) 20500 2.21~1.00 263
400 34800 3.54~1.60 420
ItemWattage
(W)Luminance
(Lm)CRI(Ra)
Color Temperature(K)
Current(A)
Input Power (W)
Spherical
85 5695
≧80 3000/4000/5000
0.76 ~ 0.34 90
100 6700 0.90 ~ 0.41 107
165 11055 1.47 ~ 0.67 175
200 13400 1.77 ~ 0.80 210
Flexible and customizable for different solutions and scenarios
Product Range for SOLARA and LUNARA Induction Lighting Systems 31
LUNARA RangeEasy to replace and available in various sockets
ItemWattage
(W)Luminance
(Lm)CRI(Ra)
Color Temperature(K)
Current(A)
Input Power (W)
Round Tubular Self-Ballasted
40 2680 ≧80 3000/4000/5000 0.21/0.15 42
Amko operates a policy of continuous development. Amko reserves the right to make changes and improvements to any of the products described in this document without prior notice.
Under no circumstances shall Amko be responsible for any loss of income or any special, incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided “as is.” Except as required by applicable law, no warranties of any kind, either express or implied, including but not limited to, the implied warran-ties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Amko reserves the right to revise this document or withdraw it at any time without prior notice.
Installation
Switch on and off safely – Do not unplug any component of the unit without properly disconnecting the ballast from the power outlet first. Make sure the unit is grounded.
Use only AMKO SOLARA components – SOLARA Induction Lighting Systems are designed specifically to work with each component of the system. Please do not use any outside components or enhancements with the system to prevent damage to the unit.
Dimmable ballasts – Our dimmable ballasts and dimmers are designed specifically to work with SOLARA Induction Lighting Systems. Do not use any unapproved or incompatible components or enhancements with the lighting system.
Use sensibly – Use only in the normal circumstances and environment that is clean with good ventilation. Do not use near fuel or chemicals. The key to the long service life of induction light-ing systems is proper heat dissipation, and it should be observed when installing the unit. The average surface temperature of the lamp may reach temperatures from 60 degrees Celsius (140F) up to 75 degrees Celsius (165F), while the surface temperature of the ballast may reach up to 60 degrees Celsius (140F). The heat sinks and brackets may be hot spots with higher temperature. Allow the unit to cool down before handling.
Water resistance – Your unit is not water resistant. Keep it dry. Fixtures with IP 65 ratings or higher can prevent your unit from getting wet.
For your safety
INSTALLATION 32
When installing the lamp unit, please check to make sure that the bent mercury reservoir is not pointing upwards. The maximum allowance for an angled installation is 45 degrees. Do not expose the lamp to temperatures greater than 110 degrees Celsius (230F) and the electro magnets (aka transformers) to greater than 120 degrees Celsius (248F). Lamps to be installed in temperatures less than -20 degrees Celsius (-4F) requires special customization to the unit from the manufacturer, and should be specified before ordering/purchasing the unit. Handle the lamps with care – the glass is fragile. Use gloves if necessary.
When installing the electronic ballast, please ensure that the placement of the ballast will not expose the ballast to temperatures greater than 65 degrees Celsius (150F) or it will degrade the service lifespan of the unit. The ballast is designed to accommodate ±10% of voltage irregularity. Only qualified personnel in your country (certified electrician) may install or repair this product.
If you are installing the unit to a fixture that is not provided by AMKO, please consult with our technical personnel for installation advice and suggestions.
Installation Tips