Architectural hardware foraluminum windows and doors
Architectural hardw
are for aluminum
window
and door system 2015
Logistic officesCosta RicaApdo. 902-6155Forum 1, Santa AnaSan José, Costa Rica
Contact:Tel.: (506) 2204-7830Fax: (506) 2204-7831Email: [email protected]
Main Storage
Logistic Office
TRADITIONAL SYSTEMS
Concealed Floor Closer Page 03Concealed Transom Closer Page 06Overhead surface closer Page 07Aluminum Door Locks - Electric Strike Page 08Flush bolts and offset pivots Page 11miscellaneous Door hardware Page 13Panic Exit devices Page 15Door pull handles Page 16
Sliding window locks Page 18Sliding Window pulls Page 21Awning window cam handles Page 22Friction hinges - Limiter Stays Page 24Single/double hung Sash locks Page 27Jalousie operators Page 29Casement Operators Page 29Sash Balances Page 30Window and door rollers Page 31
Glass Shelf supports Page 36Showcase hardware Page 37Weatherstripping and backer rod Page 38Glazing tape Page 38Screen and accessories Page 39Piano Hinges and threaded bar Page 40Glass cutters Page 41gloves and Suction cups Page 42
Doors
Windows
Miscellaneous
A 02
DOORS
A 03CONCEALED FLOOR CLOSERS
*Válvulas de ajustes de velocidades
400DS-SAM
400-TP
750B FLOOR SPRING - NARROWER VERSION
• 750B (SAM) COMES WITH STANDARD SPINDLE- SANTA MARINA TYPE.• 750B (BL) COMES WITH BLINDEX SPINDLE 3000 STYLE.• 750B (MS) COMES WITH MAB / SPEEDY SPINDLE.• UNIVERSAL APPLICATION: For single and double action doors (non-handed).• TOTAL HYDRAULIC CONTROL: Two speed adjusting valves.• BACKCHECK: Prevents damage to the door or where the door is limited.• HOLD OPEN: The door can be retained at an opening angle of 90º.
TESTED OVER 500,000 CYCLES - UL listed.
Maximum Capacity
MaximumDoor specifications
Weight Width
750B 90 Kg 1000 mm
For doors up to 110 kg
NOTE: ACCESORIES (400-TP y 400-SAM) MUST BE ORDERED SEPARATELY.
To use with bottom rail doors.
Speed adjustment valves
closing intervals and adjustments
SLOWER
FASTER
A 04 CONCEALED FLOOR CLOSERS
MODEL NUMBER
Maximum Door Specifications
Weight Width
403 B 120 Kg 1200 mm
402 80 Kg 1000 mm
• UNIVERSAL APPLICATION: For single and double action doors (non-handed). For doors with bottom rail and tempered glass doors.
• TWO ADJUSMENT VALVES: Closing and latching speed controlled by two separate valves, adjustable after installation.
• CAPACITY: For doors up to 120 kg and 1200 mm wide.• Stainless steel cover plate.• Tested over to 500,000 cycles - UL listed.• BACKCHECK: Prevents damage to the door.• HOLD OPEN: The door can be retained in an opening angle of 90º.
FLOOR SPRING - FIXED SPINDLE
NOTE: MUST BE ORDERED SEPARATELYTo use with bottom rail doors.
400-TP
403B Fixed spindle italian type
CP403-PS Standard cover plate.
305 mm
155 mm
131 mm
283 mm
220 mm
20 mm 11 mm
32 mm 25 mm
52 mm
400-DS
403B MAB/SPEEDY TYPE
For doors up to 120 kg
TESTED OVER 500,000 CYCLES - UL listed.
closing intervals and adjustments
SLOWER
FASTER
A 05CONCEALED FLOOR CLOSERS
MODEL NUMBER
Maximum door specifications
Weight Width
463 120 Kg 1200 mm
462 80kg 1000 mm
• 463 COMES WITH SANTA MARINA SPINDLE.• UNIVERSAL APPLICATION: For single or double action doors (non-handed).• For doors with door bottom rails and tempered glass doors.• TWO ADJUSTMENT VALVES: Closing and latching speed controlled by two
separate valves, adjustable after installation.• CAPACITY: For doors up to 120 Kg and 1200mm wide.• Stainless steel cover plate.• Tested over 500,000 cycles - UL listed.• BACKCHECK: Prevents damage to the door.• HOLD OPEN: The door can be retained in an opening angle of 90º.
• UNIVERSAL APPLICATION: For single and double action doors (non-handed).• Specially designed for heavy traffic zones and high wind conditions.• INTERCHANGEABLE SPINDLES.• VARIABLE CLOSING SPEED.• MECHANICAL BACKCHECK.• ADJUSTABLE HOLD-OPEN POSITION.• CAPACITY: Maximum door width 1,400 mm and 300 kg weight.• FULLY HYDRAULIC CONTROL: Two adjusting valves.
TESTED OVER 500,000 CYCLES - UL listed.
CP403-PS Standard cover plate (included).
463 FLOOR SPRING - INTERCHANGEABLE SPINDLE
850 FLOOR SPRING - HEAVY DUTY APPLICATION
2040-SAM
SPINDLES:2040-SAM (Santa Marina Type)2040-FRN (Sevax Type)2040-HD (Colombian Type)2040-MS (Casma Type)
1) Closing adjustment valve.
2) Hold open valve or relay action.
155 mm
305 mm
131 mm
52 mm
283 mm
closing intervals and adjustments
A 06
3010-G Bottom Pivot
3010-S Side load arm
Sam
ple
imag
e
Typical installation for 930/932 into transom.Picture shows the exposed door closer spindle.
832 CONCEALED FLOOR SPRING 90º HO830 CONCEALED FLOOR SPRING 105º HO
• Doors and aluminum frames: Single or double action.• Complete set: Arm, pivot, screws, etc.• Two adjustments valves. For closing and latching
speed control, adjustable after installation.
TESTED OVER 500,000 CYCLES - UL listed.
930 OVERHEAD CONCEALED CLOSER 105º Hold Open931 OVERHEAD CONCEALED CLOSER 105º No Hold Open922 OVERHEAD CONCEALED CLOSER 90º Hold Open (Light Duty)932 OVERHEAD CONCEALED CLOSER 90º Hold Open (Standard)942 OVERHEAD CONCEALED CLOSER 90º Hold Open (Heavy Duty)
• Centered door: Single or double action doors. Sold with type “S” arm.• Accesories: Hinge comes with radial pivot, mounted to ball bearing
type 310-G to fix to floor or to aluminum transom.• Instalation: To fix into aluminum transom of 1 3/4” X 4”.• Adjustments: Comes with two adjustment
valves, after installation.
CONCEALED CLOSER
MODEL NUMBER
Maximum Door specifications
Weight Width
922 90º HO 70 Kg 800 mm
932 90º HO 110 Kg 1040 mm
942 90º HO 1220 mm
MODEL NUMBER
Maximum DoorSpecifications
Weight Width
830 105º HO 120 Kg 1220 mm
832 90º HO 120 Kg 1220 mm
ACCESORIES INCLUDED.
Specifications:
TESTED OVER 500,000 CYCLES - UL listed.
A 07
• Two adjustment valves, force Nº 3.• Rack and pinion mechanism.• One compact body size only.• Die-cast aluminum body
protected by lacquer finish.• Stable hydraulic fluid for any climate
operation and constant lubrication.• Reversible operation.• Colors available: AL - BK - DU - WH.• 200 000 cycles warranty.
• Two adjustment valves, force Nº 3.• Universal application: Non-handed.• Regular arms are equipped with a
mechanism that allows to increase or decrease closing speed.
• Rack and pinion mechanism contained in a high tensile precision cast aluminum housing assures the highest quality.
• Colors available: AL - BK - DU - WH.
• Grade 3.
• 300 000 cycles warranty..
• Universal application, non-handed.• Standard adjustable back
check function.• Adjustable closing and latching
speed. Also, with screw to adjust the closing strength (see drawing).
• ANSI 156.4-1980 grade 1.• Top cover: Covers the body
of the door closer.• 3 years warranty or 500 000 cycles.• Colors available: AL - BK
1 Válvula para regular velocidad de barrido2 Válvula para regular velocidad de cierre
1 Válvula para regular velocidad de barrido2 Válvula para regular velocidad de cierre
Vista de frente
225
19
208
SURFACE DOOR CLOSERS
SERIE 300ECONOMICAL SURFACE DOOR CLOSER
963STANDARD SURFACE DOOR CLOSER
661POWER ADJUSTABLE
DOOR CLOSER
MODEL NUMBER
Maximum Door Specifications
Weight Width302 25 - 45 Kg 850 mm303 40 - 65 Kg 1050 mm
MODEL NUMBER
Maximum DoorSpecifications
Weight Width
963 Int. 65 Kg o menos 1050 mm
963 Ext. 65 Kg o menos 950 mm
MODEL NUMBER
Maximum Door Specifications
Width Opening force
Interior 1400 mm 118 kg
Exterior 1200 mm 110 kg
1- Regulating valve adjustment sweep2- Regulating valve closing speed
1- Regulating valve - closing speed2- Regulating valve - latching speed
closing speed
adjustment
latching speed
adjustment
back checkcontrol
optional delayedaction
hole to secure the cover
Power adjustment
latching speed
closing speed
A 08
A reverse turn of the key (while bolt is held retracted) retains the latchbolt, to allow two-way traffic for buildings that require so. Deadlatch can also be operated by an electric release strike. Electrical activation unlocks strike, releasing latchbolt so door can be opened without operating latch itself. When in lock position, the auxiliary bolt is retracted by pushing against the strike and creates additional security to the latchbolt.
Faceplates: FP4511 y FP4512
The deadlock is identical to the widely used maximum security swinging door lock, except that the laminated bolt is provided in a hook shape to resist the parting motion of sliding door and jam.
Faceplates: FP1821/1822
LH4560 Lever handle
ALUMINUM DOOR LOCKS
DL4510DEADLATCH LOCK
DT1850-31/32 DT1850-1 1/8MORTISE DEAD LOCK
DT1820HOOKBOLT DEADLOCK
PLANO CURVO CURVOCON FELPA
DT1850-SET-1/8DT1850-SET-31/32COMPLETE SET
This dead lock utilizes a laminated stainless steel hook bolt, activate by a pivot mechanism to provide maximun security for a single leaf narrow stile door
FP1851/1852/1853Faceplates
CZ1001Cilinder - zinc alloy
flat radius radius with weather stripping
A 09ALUMINUM DOOR LOCKSNARROW PROFILE
CB1001SOLID BRASS CYLINDER
PH4800PADDLE HANDLE
TZ3001THUMBTURN CYLINDER
activates the lock mechanism DL4510
• Stainless steel trim plate.• Hook bolt made of five
layers of laminated steel.• Works on profiles of 1” x 1” 3/4
Finishes:
• 2202-AL Aluminum
• 2202-BK Black
• 2202-DU Bronce
• 2202-WH white
• Cross type keys for more security.• Backset of 19mm.• Stainless steel body.• For narrow profiles• Also used in glass doors
with bottom rail.
Finishes:
• 901 Hook lock.
• 902 Dead lock.
902
2202NARROW PROFILE LOCK
901 MORTISE HOOK LOCK
902 MORTISE DEAD LOCK
147
37.5
2.4
115
160
170
25
2111 25.4
80
Ø9
Ø5
48 64 54
2336
18
147
37.5
2.4
115
160
170
25
2111 25.4
80
Ø9
Ø5
48 64 54
2336
18
CZ1001ZINC ALLOY CYLINDER
A 10
(Mortise Lock)
• Ideal lock for narrow profile doors.• For main door and interiors.• With cylinder and handles
on both sides.• Lock is operated with
key on both sides.• Backset 7/8”.
Finishes:
• PH1206-AL Aluminum• PH1206-BK Black• PH1206-DU Dark bronze• PH1206-WH White
(Mortise Lock)
• Ideal lock for narrow profile doors.• For main door and interiors.• Lock is operated with exterior key
and thumbturn in the interior.
Finishes:
• PH1206T-AL Aluminum• PH1206T-BK Black• PH1206T-DU Dark bronze• PH1206T-WH White
PH1206DOUBLE HANDLE LOCK
PH1206TDOUBLE HANDLE LOCK
37.6
146126.2
23.8
110.4
37.6
146126.2
23.8
110.4
(Mortise Lock)
• Ideal lock for narrow profile doors.• For main door and interiors.• Comes with european profile
cylinder and double handles.• Lock is operated with
key on both sides.
Finishes:
• PH206-AL Aluminum• PH206-BK Black• PH206-DU Dark bronze• PH206-WH White
ALUMINUM DOOR LOCKSNARROW PROFILE
PH206DOUBLE HANDLE LOCK
169.5 65 195
22
146.5
194.5
11625.5
537
13.5
20
42
TZ1206
A 11DOOR LOCK HARDWAREAND ACCESORIES
DL4510DEADLATCH LOCK
LH4560LEVER HANDLE
012ELECTRIC STRIKE
VJRSPUSH BUTTON
592TRANSFORMER
CZ1001 / CB1001CYLINDER
FP4510FACEPLATE
DOOR FLUSHBOLTRADIUS FRONT FACE
6205 DOOR FLUSHBOLTFLAT FRONT FACE
• 6” long face.• Flat front face.• Chrome finish.• Comes with plated
steel rod-10”.
Finishes available:CR - BK - AL
FB1202A 1/8” offsetFB1204A 1/4” offset
• Positive “U” joint actuator with 5/8” throw
• 10” length extension rod.• Square nylon tip with
beveled corners.• 2” adjustment on rod length.
Finishes available:AL - DU - BK - WH
COMPLETE SET
Activates the lock mechanism DL4510
A 12
OP2700 STANDARD PIVOT
• Aluminum.• Retractable pin for an
easy installation.• Full race ball bearing & bronze lining bushing.• Handed (left or right).
FINISHES:
Aluminum (AL)Dark bronze (DU)White (WH)
OP
4301
OP
2700
BB40-SS
SECURITY DOOR HINGE
19.3
10213
25.425.4
25.413
9.6
8XØ7
Ø12
3
Security Hex Screw
• 2 ball bearing hinge.• Thickness: 2.5 mm.• Maximum door weight 60 kg pair.• Square corners.• Satin stainless steel.• NRP security hex screw.• Screws not included.
BB40-SS 4” x 4”BB45-PS 4 1/2” x 4 1/2”
STOREFRONT DOOR ACCESORIESOFFSET PIVOTS
• 3/4” offset for flush doors.• Universal pivot (non-handed).• Maximum door weight 60 kg.
FINISHES:
Aluminum (AL)Dark bronze (DU)Black (BK)White (WH)
OP4301 Right
OP4302 Left
29
32.2
32.2
62.5
75.8
13.1
14
44.7
23
10
44.7
6534.6
13
Ø12.7
13.4
34.4
33
43
3331
19.8
12.7
11.551 26
1016 41.3
A 13
236-ALDOOR STOP (Dome type) 6
44.5
25
404.50
2748-ALFLIP DOWN DOOR HOLDER
S4011SECURITY PINS
MISCELANEOUS ACCESORIES
• Cast aluminum.• Vynil bumper.• Satin chrome.• Support and screws included.
• Cast aluminum.• 115mm long.• 127.0mm is also available.• Screws included.
• Security accesory.• Comes with screws.
Finishes:S4011 Nickel.SS4011 Stainless steel.
70
4.8
• Aluminum and gray vynil.• Specifications: 36” x 1
1/2” (914mm x 38mm)• Protects bottom part of the door.• Acts as weatherseal.
Finishes:573-AL Aluminum573-DU Dark bronze 573-WH White
573DOOR SWEEP
38m
m
914mm
A 14
6301
PANIC EXIT DEVICE“RIM TYPE” (Latch)
6101
PANIC EXIT DEVICECONCEALED VERTICAL ROD
• For doors up to 1.20 m wide (bar can be cut).
• Listed U.L: Panic Hardware.• Latch bolt throw 1/2”.• Can be installed with cylinder
and exterior key.• Handed, specify RH o LH doors).• Optional cylinder: Rim Type RC051.
FINISHES:
6301 AL - ALUMINUM.
6305 Cilindro
6105 6106
PANIC EXIT DEVICES
• For doors up to 1.20 m wide (bar can be cut).
• Listed UL: Panic Hardware.• Concealed vertical rod
inside frame of the door.• To use with double doors.• Can be used with cylinder
and exterior key.• Maximum door height, 2.12 meters
(extensions can be placed).• Non Handed.• Optional: Mortise type cylinder
(CZ1001) + Plate (MP6182).
FINISHES:6101- AL - ALUMINUM.6101- DU - DARK BRONZE.6101- BK- BLACK.
HAND
Left hand reverse
Right hand reverse
Exterior view
A 15
ED501
TOUCH BAR PANIC EXIT DEVICE
RC051 Rim type cylinder
ED501-AL Aluminum.ED501-DU Dark bronze.ED501-BK Black (Special Order).ED551-SS Stainless Steel (Special Order).
VR531-AL AluminumVR531-DU Dark bronze (special order)VR531-SS Stainless steel (special order)
VR531
PANIC EXIT DEVICE
Panic Device Installation Examples
PANIC EXIT DEVICES
• Easy installation (Non Handed).• For doors up to 1.20 meters
wide. (Bar can be cut).• Total length of the bar 42”.
• Surface mounted latches.• Non-handed.• For doors up to 1.20 meters
wide (bar can be cut).• Maximum door height 2.13 meter
(extensions can be placed).
A 16
228.6
88.90
ø25
• Tubular aluminum.• Powder coat paint finish.• Specifications: 25mm x 230mm• Mounting fittings included.
Finishes:AT25-AL AluminumAT25-DU Dark bronzeAT25-BK BlackAT25-WH White
• Tubular aluminum.• Powder coat paint finish.• Specifications: 25mm x 305mm.• Mounting fittings included.
Finishes:PP301-1-AL AluminumPP301-1-DU Dark bronzePP301-1-WH WhitePP301-1-BK Black
80
ø25
305
DOOR PULL HANDLES
• Specs: Diameter ø25mm. 305mm center to center. Hole diameter ø12mm.
Finishes: PS, SS
304 stainless steel
305
Ø25
AT25DOUBLE BEND HANDLE
PP301-1STRAIGHT HANDLE
PP301-1 STRAIGHT HANDLE
PP302-1 DOUBLE BEND HANDLE
A 17
WINDOW
A 18
Exterior handle. Stainless faceplate (lock).
Stainless face-plate (keeper).
Steel hooklock.
Interior handle.
2095EExterior handle.
2095IInterior handle
K/2095Keeper for PVC
2070CYLSolid brass cylinder
OPTIONAL ACCESORIES SOLD SEPARATELY
SLIDING DOOR LOCKS AND ACCESORIES
2095 - SET (Basic Kit) Finishes WH, BK, AL
2095DHDOUBLE POINT LOCK FOR SLIDING DOORS.
50
6.6
1.813.5
30
Ø 6.3
98.3
196.
6
208.
3
196.
6
14vista de frente
• Centralized operation.• Stainless steel faceplate.• Steel lock.• Uses 2070 cylinder.
• Interior and exterior handle.• Keeper and lock included. • For aluminum and PVC sliding doors.• Keeper optional for PVC systems.
• Available for Aluminum, PVC and wood.• Adjustable hooks.• Closing system (opposite hook), prevents
disabling the lock for better security.
K/2095Dnot included
K/2095D Keeper for PVC not included FP2095D Faceplate for lock not included
FD2095D
Front view
A 19SLIDING DOOR LOCKS AND ACCESORIES
130
102
120
1422
13.5
60 2818
max
. 82
- min
. 48
• Handle for sliding window or door systems.
• Multipoint with two locking points.
• This handle can be installed in traditional systems such as 8025, P-92, Akari and similar systems.
DP8040DUAL-POINT SLIDING LOCK HANDLE
A 20 LOCKS AND PULL HANDLESSLIDING DOORS AND WINDOWS
1430NKASLIDING DOOR LOCK
1430WASLIDING WINDOW LOCK
WFC-1 / WFC-1 1/8WAFER CYLINDER
11.5
17.35
167
185
11 11.5
167
71
11 17.35
185
SL123AUTOMATIC WINDOW LOCK 13.018.2
14.6
• Economical.• Automatic (with spring).• One side.• Without cylinder.• Aluminum housing.• Keeper and hook in
zinc coated steel.
FINISHES:AL, BK, WH, DU
• Two sides.• Without cylinder (optional).• Keeper and screws.
FINISHES:AL, CR, DU, BK, WH
• One side.• Without cylinder.• Keeper and screws included.
FINISHES:AL, CR, DU, BK, WH
• Stainless steel housing.• Comes with key.• Used with 1430NKA.
cilindro 1 1/8
cilindro 1
28.8
13.5 7.5
1.6
Ø15.8 Ø12.65.4
1.6
5.4
25.913 2.7
Ø15.8
Ø12.6
cylinder 1 1/8"
cylinder 1"
A 21LOCKS AND PULL HANDLESSLIDING DOORS AND WINDOWS
PC106 WOOD SLIDING HANDLE
15114ASLIDING WINDOW LOCK NARROW PROFILE JAGUAR TYPE
1400/1401A DUMMY PULL HANDLE
168mm
186mm
12mm12mm
• Zinc die-cast one piece construction.
• 168mm (center to center).• 247mm overall length.
FINISHES:CR, AL, BK, WH
PC106
• One side.• Without cylinder.• Keeper and screws included.
FINISHES:AL, CR, DU, BK, WH
• Without cylinder.• Two sides.
FINISHES:AL, CR, DU, BK, WH
• Genuine wood.• 168mm (center to center).• 254mm overall length (PC106).
FINISHES:CR, AL, BK, WH
PC675ACHROME SLIDING HANDLE
254
167.
6
51.3
24.516.1
62.2
61.750.5
167.6
249.3
A 22 WINDOW CAM HANDLESAND ACCESORIES
RIGHT:CH-RHA-AL AluminumCH-RHA-DU Dark bronzeCH-RHA-BK BlackCH-RHA-WH White
Right:536A-AL Aluminum536A-DU Dark Bronze536A-BK Black536A-WH White
RIGHT HAND:336-AL Aluminum336-DU Dark bronze336-BK Black336-WH White
CH-RHACAM HANDLE WITH KEEPER
336WEDGELESS CAM HANDLE
536AWEDGELESS CAM HANDLE
LEFT:CH-LHA-AL AluminumCH-LHA-DU Dark bronzeCH-LHA-BK BlackCH-LHA-WH White
• Comes with metal keeper and nylon insert.
LEFT HAND:337-AL Aluminum337-DU Dark bronze337-BK Black337-WH White
• For aluminum awning or casement windows.
• Wedge incorporated as a flap attached to the main body prevents sash from being skewed sideways by closing.
• Easy installation.
Left:537A-AL Aluminum537A-DU Dark Bronze537A-BK Black537A-WH White
• Used in steel or aluminum windows.
• Comes with a wedge incorporated in body.
37.8
75.5
16.2
37.852.2
4.8
8.3
76
35.5
17
37.4
7.4
4
4.4
A 23WINDOW CAM HANDLESAND ACCESORIES
wedges available:
WED03 (3mm)WED04 (4mm)WED06 (6mm)WED07 (7mm)WED095 (9.5mm)
73.8
8
10
140
1038
17 4-ø5
9
OH216KLH-WHHANDLE WITH PUSH BUTTON AND KEY
• Handle with button for awning windows
• Zinc die cast• Comes with 3 keys
SLALHANDLE WITH PUSH BUTTON
WEDGEPLASTIC WEDGE
FOR PVC• 18mm height
LWH-RH White
LWH-LH White
FOR ALUMINUM
• 9mm height with 6mm wedgeSLAL-RH Aluminum
SLAL-LH Aluminum
SLBK-RH Black
SLBK-LH Black
SLWH-RH White
SLWH-LH White
FINISHES: AL - WH - BK - DU142. 4
49. 5
21.5
10
27. 551. 4
7.2 22.6
• For casement and awning windows.
• 4 different wedges and screw covers included.
• Reversible (left and right).• Finishes: AL-BK-WH.
57.8
38.0
7.2
18.2
31.
3 Ø
4.7
14
OH507WINDOW LOCK
A 24 FRICTION HINGESFOR WINDOWS
430SSFRICTION HINGE
CODE LENGTHMAXIMUM WINDOW SPECS OPENING
DEGREEMAXIMUM HEIGHT WEIGHT
430SS-6 152.4mm 350mm 8kg 60º
430SS-8 203.2mm 350mm 12kg 60º
430SS-10 254mm 400mm 14kg 89º
430SS-12 304.8mm 500mm 14kg 89º
430SS-14 355.6mm 650mm 18kg 89º
430SS-16 406.4mm 750mm 20kg 89º
430SS-20 508mm (5 bar) 1000mm 24kg 50º
430SS-24 609.6mm (5 bar) 1200mm 35kg 50º
• 430 - ferritic stainless steel (magnetic).• Universal - non-handed.• Regular Duty.• Hinge width: 18.5mm.• Thickness per bar: 2.0mm.
Made under AAMA specifications.
222SS LIGHT DUTY HINGE
LENGTHMAXIMUM WINDOW SPECS OPENING
DEGREEMAXIMUM HEIGHT WEIGHT
12” (304.8mm) 600mm 22kg 90º
16” (406.4mm) 750mm 24kg 90º
333SS HEAVY DUTY HINGE
LENGTHMAXIMUM WINDOW SPECS OPENING
DEGREE MAXIMUM HEIGHT WEIGHT
12” (304.8mm) 700mm 43kg 90º
16” (406.4mm) 750mm 55kg 90º
20” (508mm) 900mm 65kg 90º
• 304 stainless steel.• Universal - non handed.• 90 opening• Hinge width: 18.5mm (light duty)• Hinge width: 22mm (heavy duty)• Thickness on each bar: 2.0mm• Allows a maximum opening to the window• Uses a nylon slider for a better adjustment
HEAVY DUTY
222SS / 333SSLIGHT DUTY HINGE
A 25HEAVY DUTY FRICTION HINGE
• European style, asymmetric.• 304 - stainless steel (austenitic).• Reinforced hinge.• Hinge width: 22.0mm.• Thickness per bar: 3.0mm.• Hinge cavity: 16.0mm.
Made according to European specifications
EU304HDFRICTION HINGES
EU304RDFRICTION HINGES
CODE LENGTHMAXIMUM WINDOWS SPECS OPENING
DEGREEMAXIMUM HEIGHTS WEIGHT
EU304HD-10 254mm 400mm 33kg 89º
EU304HD-12 304.8mm 500mm 39kg 89º
EU304HD-16 406.4mm 750mm 52kg 89º
EU304HD-20 508mm (5 bar) 1000mm 65kg 89º
EU304HD-22 558.8mm (5 bar) 1100mm 70kg 89º
EU304HD-24 609.6mm (5 bar) 1200mm 79kg 40º
EU304HD-26 660mm (5 bar) 1200mm 85kg 30º
EU304HD-28 711.2mm (5 bar) 1200mm 90kg 30º
EU304RD FRICTION HINGE
CODE LENGTHMAXIMUM WINDOW SPECS. OPENING
DEGREEMAXIMUM HEIGHT WEIGHT
EU304RD-8 205.3mm 350mm 12kg 89º
EU304RD-10 255.3mm 400mm 14kg 89º
EU304RD-12 305.3mm 550mm 16kg 89º
EU304RD-16 404.6mm 800mm 20kg 89º
EU304RD-20 504.4mm 900mm 24kg 60º
EU304RD-24 604.4mm 1200mm 35kg 60º
* Ask about more opening degrees available.
EUROPEAN STYLE 4-BAR HINGEFor awning windows
To use in awning PVC or aluminum windows. Innovative end cap design to ensure optimum weather seal in closing position (asymmetric).
• 304 - stainless steel (austenitic).• Handed (right or left).• Metal end cap to assure more durability.• Hinge width: 18mm.• Hinge cavity: 13-14mm.
Made according to European specs.
HEAVY DUTY
A 26 FRICTION STAY FOR AWNING WINDOWS
EURD-25LIMITER STAY
EUP304PARALLEL PROJECTING ARM
EUHD-26LIMITER STAY
• Limiter stay 250mm• Stainless steel 304• For series 4020 and European.
*For installation on European series a piece of profile adapter is needed
• Limiter stay 260mm• Stainless steel 304• For series 4020 and European
*For installation on European series a piece of profile adapter is needed.EURD-25 / EUHD-26 Limiter stay
18.5
CodeEUP304
Weight máx.
Height máx.
Width máx.
Open. (mm)
Cavity(mm)
-11 25 kg 1450 350 9516.9-1.0 21.0-1.0
-18 100 kg 1000 1200 18016.9-1.0 21.0-1.0
-36 200 kg 2000 2000 18016.9-1.021.0-1.0
• Friction stay for parallel projecting window.
• Designed for European profiles and curtain wall systems.
• Allows a better airflow in all the window perimeter.
• Adjustable friction mechanism.
• Available in 11, 18 and 36”.
• Manufacture in 304 stainless steel.
• Uses a nylon slider for a better adjustment.
• Allows fabrication of bigger windows.
Note: Recommended weights requires 4 hinges installed for every window.
CA
G
5.5
9.8
Ø5.5
E
D
22
16.921
Size “A” B C D E F GWeight Máx. kg
height Máx. (mm)
width Máx. (mm)
Cavity
280 mm 10 260 110 60 — 95 25 1450 350 16.9 - 1.0 mm
470 mm 10 450 170 110 — 180 100 970 97016.9-1.0 ó 21-
1.0 mm
940 mm 10 460 170 110 640 180 200 2000 200016.9-1.0 ó 21-
1.0 mm
A 27WINDOW LOCKS
2530SASH WINDOW LOCK
FINISH:AL, DU, BK, WH
SL01A-WHSASH WINDOW LOCK
FINISH:Whi te .
SL02-BKSASH WINDOW LOCK
FINISH:Black .
KEEPER: SL01R-BK (order separately)
FINISH:Whi te .Keeper inc luded
SL03-WHSASH WINDOW LOCK
52
51.5
28
6.8
52
55.5
26.57.65
52
37.6
25.6
23.4
5
2.250
0.7850.392
o.415o.475
A 28 HARDWARE FOR WINDOWS
WINDOW SASH LOCK
FINISHES:AL, DU, BK, WHKeeper inc luded
SL 2530KWINDOW SASH LOCK
5301RWINDOW SASH LOCK
OH927CENTER OVERLAP LOCK
OH927KKEYED OVERLAP LOCK
WINDOW SASH LOCK
FINISHES:AL, DU, BK, WHKeeper inc luded
OVERLAP LOCK
Die-cast a luminum handle
F in ishes: BK, WH
KEYED OVERLAP LOCK
Die-cast a luminum handle
F in ishes: BK, WH
2.250
0.7850.392
o.415o.475
58
6.5
44.4
20.130.2
4.20.6
30
39.2
19.5 32.8
19.1
172.6
15 32.715.5
157
24
39.219.5 32.8
42
19.1
172.6
15 32.715.5
157
24
A 29WINDOW OPERATORSAND ACCESORIES
• Universal application.• Epoxy powder coated and
baked to provide durability and resistance to corrosion.
• Standard arm length 92 mm.• Hardened pinion and gear
by a heating process.
FINISHES:
DL501A-AL AluminumDL501A-DU Dark bronzeDL501A-BK BlackDL501A-WH White
DL501A-P = Large link designed for Panamá 111 mm (center to center)
Window operator with pulley for high reach
Works with ball chain 135STNP
• Epoxy powder coated.• Arm length 92mm.• Finishes: AL, DU, WH.
352mm
RIGHT:5025RH-AL Aluminum5025RH-DU Dark bronze5025RH-BK Black5025RH-WH White
LEFT:5025LH-AL Aluminum5025LH-DU Dark bronze5025LH-BK Black5025LH-WH White
TK367 STEEL TRACK ( included)• Plated steel channel guide.• Screws not included.
Hardened worm gear specially designed for maximum strength.
DL501AJALOUSIE OPERATORWITH “T” HANDLE
92.5
131.6
33.8
6.5
92.5
77.5
131.633.8
6.5
16.4
WOAWINDOW OPERATOR WITH PULLEY
5025RH / 5025LHCASEMENT OPERATOR
Ø13.8
Ø4 - 5.5
13312098.2
227.6
14.1
11.8
7.4
18
38
TPBTELESCOPIC PUSH BAR
127
76.2
EXTENDS TO 26.70mm
• Folds to the side when window is in the closed position.
• For proyecting windows using screen.
FINISHES:AL, DU, BK, WH
A 30
Balance 3/8” (with 999 clip)HEAVY DUTY (10.5kg-19kg)/pair
ITEM Length
FBH38C11 11”
FBH38C12 12”
FBH38C13 13”
FBH38C14 14”
FBH38C15 15”
FBH38C16 16”
FBH38C17 17”
FBH38C18 18”
FBH38C19 19”
FBH38C20 20”
FBH38C21 21”
FBH38C22 22”
FBH38C23 23”
FBH38C24 24”
FBH38C25 25”
FBH38C26 26”
FBH38C27 27”
FBH38C28 28”
FBH38C29 29”
FBH38C30 30”
FBH38C31 31”
FBH38C32 32”
FBH38C33 33”
FBH38C34 34”
FBH38C35 35”
FBH38C36 36”
FBH38C37 37”
FBH38C38 38”
FBH38C39 39”
FBH38C40 40”
FBH38C41 41”
FBH38C42 42”
FBH38C43 43”
FBH38C44 44”
FBH38C45 45”
Balance 3/8” (with 999 clip)STANDARD (1.6kg-10kg)/pair
ITEM Length
FB38C11 11”
FB38C12 12”
FB38C13 13”
FB38C14 14”
FB38C15 15”
FB38C16 16”
FB38C17 17”
FB38C18 18”
FB38C19 19”
FB38C20 20”
FB38C21 21”
FB38C22 22”
FB38C23 23”
FB38C24 24”
FB38C25 25”
FB38C26 26”
FB38C27 27”
FB38C28 28”
FB38C29 29”
FB38C30 30”
FB38C31 31”
FB38C32 32”
FB38C33 33”
FB38C34 34”
FB38C35 35”
FB38C36 36”
FB38C37 37”
FB38C38 38”
FB38C39 39”
FB38C40 40”
BALANCESFOR SINGLE HUNG SASH WINDOWS
TILT BALANCEAvailable size: ø3/8” For aluminum and PVC windows. Sold in 100 units carton
A 31
TAN-1 1/4 TANDEM ROLLER (Nylon wheels)TAS-1 1/4 TANDEM ROLLER (Steel wheels)TASS-1 1/4 TANDEM ROLLER (SS wheels) STAINLESS STEEL.
• Ball bearing wheels. Adjustable 7.5mm.
• Plated steel housing.
AR06
TANDEM ROLLER - END ADJUST
AR06N-1 1⁄2 Nylon wheelsAR06S-1 1⁄2 Steel wheels
• Ball bearing wheels.• Plates steel housing.
TAV-1 1/4 TANDEM ROLLER FOR PVC
TAVN-1 1⁄4 Nylon wheelsTAVS-1 1⁄4 Steel wheels
• Wheel diameter ø38mm• Plated steel housing.• Range 11.5mm
TANDEM DOOR ROLLERSAdjustable rollers
5723-WHEEL HANGING ROLLER
3-WHEEL NYLON ROLLER WITH BALL BEARING SUSPENSION
• Ball bearing wheels with nylon covering.
• Maximum door weight 95 kg/pair.• Quick connection feature.• Vertical adjustment access
38
47.6
118
17
30
158
• Steel plated housing.• Ball bearing wheels.• 38 mm. Wheel.• Width 21 mm.• Height 41.4 mm.
• ABB wheels
TANTANDEM ROLLER - SIDE ADJUST
TAV
TANDEM ROLLER - END ADJUST
F4260TANDEM ROLLER-ADJUSTABLEHEAVY PROFILE
19.8
20.8
10.2
32.2
80
28.3
Ø38
17.39.65
7.11
14.2
114
4620
3829
.2
28 ajuste
Ø38
Ø5.5
14.2
118.535.6 / 46
50.8
158
17.8146.5
92°
3 30
quick connection
A 32 DOOR AND WINDOW ROLLERSAdjustable rollers
AR21S-1 1⁄4 Steel wheelAR21S-1 1⁄2 Steel wheel
• Available: Nylon wheel - ø38mm.• Steel wheel, without tab.
AR37N-1 1⁄4 Nylon wheelAR37S-1 1⁄4 Steel wheel
• Steel housing.• With tab.
AR14N-1 1⁄2 Nylon wheel• Steel housing.• With tab.
Wheel ø32mmWidth 14mmRange 7mmHeight 27mm
Wheel ø38mmWidth 18.50mmRange 12.7mmHeight 42mm
Wheel ø32 o ø38mmWidth 16.45mmRange 12mmHeight 28.60mm
AR38S-1 1⁄4 Steel wheel
• Steel housing.• Without tab.
AR12N-1 1⁄2 Nylon wheel AR12S-1 1⁄2 Steel wheel
• Steel housing.• With tab.
AR07N Nylon wheel • Steel housing.• Without tab.
Wheel ø32mmWidth 14.70mmRange 6.30mmHeight 26.70mm
Wheel ø38mmWidth 20.25mmRange 7.30mmHeight 38.50mm
Wheel ø38mmWidth 19.65mmRange 16mmHeight 36.50mm
AR01S-1 1⁄2 Steel wheel
• Steel housing.• Without tab.
AR03S-1 1⁄2 Steel wheel
• Steel housing.• Without tab.
AR20S-1 1/2 Steel wheel
• Steel housing.• Without tab.
Wheel ø38mmWidth 19mmRange 11mmHeight 39.65mm
Wheel ø38mmWidth 18.85mmRange 11mmHeight 35mm
Wheel ø38mmWidth 18.50mmRange 8.80mmHeight 30mm
AR11N-1 1⁄4 Nylon wheel
• Steel housing.• With tab.
AR519N-1 1⁄2 Nylon wheelAR519S-1 1⁄2 Steel wheel
• Zamac housing.• Without tab.
AR10N-1 1⁄2 Nylon wheel
• Steel housing.• With tab.
Wheel ø32mmWidth 18.90mmRange 10.40mmHeight 30.70mm
Wheel ø38mmWidth 16.85mmRange 18mmHeight 30mm
Wheel ø38mmWidth 18.35mmRange 9mmHeight 33.80mm
A 33
AR37ABB ABB Wheel
• Steel housing.• With tab
Wheel ø32mmWidth 14mmRange 7mmHeight 27mm
AR12ABB ABB Wheel
• Steel housing.• With tab
Wheel ø38mmWidth 20.25mmRange 7.30mmHeight 38.50mm
ABB Wheel• Ideal for installations by the ocean.• Very soft rolling.• Less noise and vibration.• Better corrosion resistance
ABB Wheel• Ideal for installations by the ocean.• Very soft rolling.• Less noise and vibration.• Better corrosion resistance
DOOR AND WINDOW ROLLERSAdjustable rollers
AR69• Nylon wheels.• Plated steel housing.
Wheel ø20mmWidth 14.54mmHeight 21.62mm
B514• Plastic and aluminum body.• Adjustable steel wheel.
Wheel ø22mmWidth 10.81mm
D2413 Pabose Type
• Nylon groove wheel.• Plated steel housing.
Wheel ø20,46mmHeight 21.51mm
D2413T Pabose Type
• Double nylon groove wheel.• Plated steel housing.
Wheel ø20,46mmHeight 25.51mm
AR70
• Steel housing.• Adjustable nylon wheel.
Wheel ø19.15mmWidth 15.9 mmHeight 17.5 mm
D2413PL
• Plastic housing.• Adjustable nylon wheel.
D140S-1 1⁄2 Steel wheelD140N-1 1⁄4 Nylon wheel
• With mounting tab.• Maximum weight:
- Nylon wheel 25Lbs/roller- Steel wheel 45Lbs/roller
AR08N-1 1/4 Nylon wheelAR08S-1 1/4 Steel wheel
• Aluminum housing.• Without tab.
Wheel ø32mmWidth 19mmRange 8.75mmHeight 30mm
Wheel ø19 mmWidth 11 mmHeight 15.7 mm
A 34
353A PVC WINDOW ROLLER381T PVC WINDOW ROLLER
• PVC and aluminum applications.• Nylon housing.• Brass wheels.• Stainless Steel axle pin.
BR4-G y BR4-FWINDOW ROLLER
• Grooved or flat wheel.• Nylon housing.
FINISHES:BR4F N ylon flat wheel.BR4G Nylon groove wheel.
BR10WINDOW ROLLER
• Flat wheel.• Nylon housing.
FINISHES:BR10N Nylon flat wheel.BR10S Steel flat wheel.
CU1ECONOMICAL ROLLER
• Grooved nylon wheel.• For economic profiles.• Aluminum housing.
D4700SLIDING WINDOW ROLLER
• Nylon housing: 2 holes with screws.• Brass wheels.• Stainless Steel axle pin.• Comes with two wheels.
B512 / B513SLIDING DOOR ROLLER FOR SCREEN FRAME
B512 Nylon wheel.B513 Steel wheel.
• Grooved wheels.• 1” wheel diameter.
M01REFRIGERATION TRACK ROLLER
• Steel wheel.• Grooved wheels.
353A
T8 / T9WINDOW ROLLER
• Grooved wheel.• Used in sliding showcase display.
FINISHES:T8 Nylon wheel 14mmT9 Steel wheel 14mm With ball bearing.
M6000 OVAL ROLLER 3/4”• For shower doors.• Wheels mounted in axis
with ball bearings.• Screws not included. Specify.• M6000S (with screw)
M7000 OVAL ROLLER 7/8”• For shower doors.• Wheels mounted in axis
with ball bearings.• Screws not included. Specify.
M6001 FLAT ROLLER 3/4”• For shower doors.• Wheels mounted in axis
with ball bearings.• Screws not included. Specify.
SHOWER DOOR ROLLERSWith oval or flat wheels
381T
DOOR AND WINDOW ROLLERSAdjustables Rollers
A 35
MISCELLANEOUS
A 36 SHELF SUPPORTS
SOPORTE
MURO
VIDRIO
SOPORTE
MURO
VIDRIO
For shelves and glass from 3 mm to 25 mm thickness.Fixed to wall with a screw (included).Thickness adjusting screw.Simple and easy to install.Use at home, office, etc.Base material: Zinc die-cast.
Finish: Chrome.
GL631-CR
SHELF SUPPORTS
GL632-CRSHELF SUPPORTS
For shelves and glass from 3 mm to 25 mm thickness.Fixed to wall with a screw (included).Thickness adjusting screw.Simple and easy to install.Use at home, office, etc.Base material: zinc die-cast.
Finish: Chrome.
L W HGL631 44 35 31
L W HGL632CR 68 28 47
Glass thickness from 6mm to 10mm.Several sizes available.Base material: solid brass and stainless steel.Several applications.GSH32150 Length 150mm Diameter 32mmGSH32100 Length 100mm Diameter 32mmGSH2525L Length 25mm Diameter 25mmGSH2550 Length 50mm Diameter 25mmGSH1530 Length 30mm Diameter 15mm
GSH MULTI-PURPOSE STANDOFFS
GL881SHELF SUPPORTS
GL882SHELF SUPPORTS
Larg
o to
tal
Diametro
Tota
l len
gth
Diameter
23
26
M6
21
Ø25
Ø25
10.5
Finishes: CR Chrome. Finishes: CR Chrome.
support
support
diameter
tota
l len
gTH
glass
glass
wall
wall
A 37DISPLAY HARDWARE
ESQ1 ESQ2
CORNER CONNECTOR FOR GLASS DISPLAY SHOWCASE 90˚• Zinc die-cast - chrome plated
CORNER CONNECTOR FOR GLASS DISPLAY SHOWCASE 135º• Zinc die-cast - chrome plated
1880FINGER PULL
• Base material: plastic.• Adhesive back.
FINISHES:1880-CL Clear1880-BK Black1880-DU Dark bronze
83.5mm
1000/carton
26mm
SL1200SHOWCASE LOCK
• Base material: Chrome plated steel.• For glass 1/4” thick.• Comes with two keys.
807 / 808 / 809PLASTIC MIRROR CLIP
• Base material: acrylic.
SPECIFICATIONS:807 1/8” (3.18mm).
808 3/16” (4.76mm).
809 1/4” (6.35mm).
1000/carton
2-WAY 90ºFP1-1/4 Chrome
3-WAY 90ºFP3-1/4 Chrome
4-WAY 90ºFP5-1/4 Chrome
3-WAY 120ºFP4-1/4 Chrome
2-WAY 135ºFP6-1/4 Chrome
HINGEFP8-1/4 Chrome
A 38
cinta estructural
silicon
espuma celular
vidrio cámara
structural tape
silicone
backer rod
glass plate
cinta estructural
silicon
espuma celular
vidrio cámara
structural tape
silicone
backer rod
glass plate
FELPAWEATHERSTRIPPING
• Door and window application.
NOTE: Other heights available under special order.
FINSEALAvailable upon request. Plastic fin in center.
Finish: AL,WH,BK
Cod. Base Height Qty/carton Finish
F48300 4.8mm 3.0mm 2020m AL, BK
F48500 4.8mm 5.0mm 2020m AL, BK
F48630 4.8mm 6.3mm 2020m AL, BK
F481230 4.8mm 12.3mm 932m AL, BK
F68500 6.8mm 5.0mm 2020m AL, BK
F68630 6.8mm 6.3mm 2020m AL, BK,
F68940 6.8mm 9.4mm 1556m AL, BK
F108730 10.8mm 7.3mm 932m AL, BK
5053G 2.8mm 13.5mm 4.000 AL,BK
GR0BACKER ROD
Cod. Free/space Diam. Qty/carton
GR037 1/4” 3/8” 3,600’
GR050 3/8” 1/2” 2,500’
GR062 1/2” 5/8” 1,550’
GR075 5/8” 3/4” 1,100’
V2200GLAZING TAPE
Cod. Size Qty/carton
2204B14 1/8”X1/4”X50’ 65 rolls
2204B12 1/8”X1/2”X50’ 30 rolls
2204B38 1/8”X3/8”X50’ 40 rolls
2208B14 1/4”X1/4”X50’ 65 rolls
2208B12 1/4”X1/2”X50’ 30 rolls
2208B38 1/4”X3/8”X50’ 40 rolls
2206B12 3/16”X1/2”X50’ 30 rolls
2212B12 3/8”X1/2”X25’ 30 rolls
MISCELLANEOUS PRODUCTS AND ACCESORIES
• Excellent water resistance.• Resistant to high and
low temperatures.• To use in window installations
(between frame and wall).• Minimizes silicone
• Semi-rigid tape with adhesive face.
height
A 39SCREEN AND ACCESORIES
FIBERGLASS SCREEN
FINISHES AND SIZESGrey (AL) / Black (BK)
CHARACTERISTICS:
• Base material: Fiberglass.• 100’ length rolls (30m).• 600’ length rolls (183m.) (special order).• Micro-welded 18x16 threads/inch.• Avalilable colors: Gray (AL) or black (BK).• Other sizes available. Upon request.• Threads of 0.28mm diameter.• PVC coated free of lead & cadmium.• Weight 115 gr por m2.
• Threads welded by high temperature thermal fixing.
NOTE: Aluminum screen available upon special order.
Item Width Item Width
CED30-AL 30” CED30-BK 30”
CED36-AL 36” CED36-BK 36”
CED42-AL 42” CED42-BK 42”
CED48-AL 48” CED48-BK 48”
CED60-AL 60” CED60-BK 60”
CED72-AL 72” CED72-BK 72”
8004SCREEN FRAME ROLLER
• Wood handle.• Ball bearings.• Steel wheels.
01-011ALUMINUM SCREEN
PROFILES
• Aluminum profiles - 3.81m. length.• Finishes: AL-DU-WH-BK
SP-21C / SP-27TENSION SPRING
• The tension spring keeps the frame fixed into the window channel.
• Height: 1/2”..
2000’ per carton160 pieces of 12,5 “
27mm
57.5mm
6mm
SP-21C Stainless Steel
4.5mm 74mm
SP-27
4000/carton
L5509PLASTIC SCREEN CLIPS
Used to secure window screens to wood or metal frame; turn to
remove the screen easily.Finishes: AL, BK, DU, WH.
L5525SPLINE CHANNEL PULL TABS
Allows the removal of the screen from the window channel, without interfer-ing with opening and closing window.
Finishes: AL, BK, DU, WH.
L5591PLASTIC CORNERS
To be placed in the corners of the profile frames. Available in 7.93mm
Finishes: AL, BK, DU, WH.
10.5mm
A 40 MISCELLANEOUS PRODUCTS
PIANO HINGE FOR SHOWER DOOR
• Base material: Aluminum• Specs.: 1828mm length,
1.03mm hinge thickness and 50mm hole to hole
ITEM DESCRIPTION
CA1-1001 26.6mm without holes (1 1/16”)
CA2-1001 26.6mm with holes (1 1/16”)
CA1-1002 27.2mm without holes (1 1/4”)
CA2-1002 27.2mm with holes (1 1/4”)
50mm
• Phillips screwdriver bit.• Material: S2 (steel)
20028 Size 1/4 x 2”.10028 Size 1/4 x 1”.
13STNPBALL CHAIN
• Base material: Nickel Plated steel.• 250´/roll. • Ball 1/4” - 6.3mm
Special Order:3STNP 3mm6STNP 6mm10STNP 10mm
13BBALL CHAIN CONNECTORS
• 500 units per carton
TE1932SHOWER DOOR CATCH
• Base material: stainless steel.• With nylon tip.
100/carton
33.34mm
19.05mm
14.29mm
12.70mm
CP38 COUPLERWA38 WASHERHN38 HEX NUT
• Specifications: 72” x 3/8” (1828mm x 9.5mm).
• Accesories sold separately.
2366ZINC COATED THREADED BAR
300BULLET CATCH FOR
SHOWER DOOR
• Chrome plated steel.
KS9116PROFESSIONAL HEAVY DUTY CAULKING GUN
• Heavy-Duty type.• Can rotate 360º.• High quality hardened steel rod.• Better value for best price.• 9” standard cartridge.
10028 / 20028PHILLIPS ROUND
SHANK BIT
A 41
BO100.0SILBERSCHNITT GLASS CUTTER
• Wood handle.• Specially tempered steel alloy.• Oil rings lubricate the axis of the wheels.• Replaceable carbide cutting wheels.
MADE IN GERMANY
REPLACEMENT:BO102.0 Wheels.
BO360.0JOKRA GLASS CUTTER
• Wood handle.• Comes with 6 interchangeable steel wheels.• Economical.
MADE IN GERMANY
REPLACEMENT:BO362.0 Wheels.
TC17BTOYO BRASS GLASS CUTTER
• Brass handle with oil reserve.• The oil fluid can be regulated by a screw.• Its round head reduces the possibility of a bad
run between the straight angles and the square corners.
MADE IN JAPAN
TC17HReplacement
TC1SRFLUORESCENT GLASS CUTTER
• Fluorescent plastic handle.• Self-lubricated.
TC600STOYO GLASS CUTTER
• Self-lubricated.• Professional style.
210-5210GLASS PLIERS
GLASS CUTTING TOOLS
A 42
MADE IN GERMNAY
SUCTION CUPS FOR GLASS HANDLING
SC802DOUBLE SUCTION CUP - HEAVY DUTY .
• Maximum capacity 120Kg.• Cast aluminum body• High quality rubber pad.
SC803TRIPLE SUCTION CUP - HEAVY DUTY
• Maximum capacity 210Kg.• Cast aluminum body.• High quality rubber pad.
TCN4000POWER-GRIP TYPE WITH FINGER PUMP
• Polycarbonate housing.• Professional suction cup.• Maximum capacity 120Kg.
TYPESBO511.1 60cm / 24”BO514.1 120cm / 48”BO515.1 160cm / 64”BO516.1 200cm / 80”
SILBERSCHNITT CIRCLE CUTTER
• The suction cup holds the piece firmly in the correct place.
• Ball handle for additional comfort.• Regulated bar in inches and centimeters.
A 43SUCTION CUPS FOR GLASS HANDLING
SC602DOUBLE SUCTION CUP - REGULAR DUTY
• Cast Aluminum• Maximum capacity 85Kg.
TC603TRIPLE SUCTION CUP - REGULAR DUTY
• Cast aluminum• Maximum capacity 140Kg
SC614.0REPLACEMENT SUCTION CUP
SC614REPLACEMENT SUCTION CUP WITH LEVER
GG66STANDARD CUT-RESISTANT GLOVES
GG55ECONOMICAL CUT-RESISTANT GLOVES
A 44
TYPE OF ORDERS
Regular ordersQuotations done by fax, telephone or email.
Electronic ordersQuotations done by internet:e-mails: [email protected]
Special ordersTo order special products not included in inventory requires a 30% deposit in advance. Please inquire.
Back OrdersUnshipped products will be sent with prior authorization of the customer on the next regular order.
Special volume ordersA special discount may be offered with this kind of order. Please inquire.
Sale pricesSubject to change without previous notice.
PAYMENT CONDITIONS
Bank wire transferA Bank Wire Transfer (bank to bank) can be done for the amount of the invoice. Wire instructions will be advised.
OTHER CHARGES
Internal CartageThis the cost to truck the goods from the warehouse to the port, shipping company, or airline. The cost depends on the volume-weight relationship of the cargo.
FreightThis is the cost charged by the air or maritime shipping company, to transport the goods to destination.
Insurance (optional)Amount charged by the Insurance Company. The customer must specify to the Sales Team to include this service before the goods are shipped. WE DO NOT INSURE UNLESS INSTRUCTED TO DO SO.
GENERAL INFORMATION
To request a quotation
Be sure to write Olimpia codes correctly when sending a request:
303-AL Economical Surface Door Closer
Product Code Finish Description
Finishes
The finishes of the products have the following codes:
Aluminum AL
Dark Bronze* DU
Black BK
White WH
Bright Chrome CR
Polished Stainless Steel PS
Satin Stainless Steel SS
Polished Nickel PN
Satin Nickel BSN
* DU finishes may vary, please specify.
PRODUCT WARRANTY
Our products are guaranteed by physical replacement for items with factory defects. If a defect is found during the period of warranty (inquire), Olimpia representative must be notifIed inmediately to do an inspection.
If the order received by the customer is missing a box, Olimpia must be notified within 14 calendar days after clearing customs. This report must be an official report from Customs and made by an inspector during the customs clearing process and not afterwards.
Note: “Report of findings”, this formal process is the only one accepted by the insurance company.
Architectural hardware foraluminum windows and doors
Architectural hardw
are for aluminum
window
and door system 2015
Logistic officesCosta RicaApdo. 902-6155Forum 1, Santa AnaSan José, Costa Rica
Contact:Tel.: (506) 2204-7830Fax: (506) 2204-7831Email: [email protected]
Main Storage
Logistic Office
TRADITIONAL SYSTEMS