8/18/2019 Assembly of Rotary Feeder
1/12
ASSEMBLY OF ROTARY FEEDER
An Assembly is comprised of one or more Solid Works Parts or Assemblies, and is used to model
relationships between these subcomponents or subassemblies using relationships called Mates.
You can build complex assemblies consisting of many components, which can be parts or other
assemblies, called subassemblies. or most operations, the beha!ior of components is the same
for both types. Adding a component to an assembly creates a link between the assembly and the
component. When S"#$%W"&'S opens the assembly, it finds the component file to show it in
the assembly. (hanges in the component are automatically reflected in the assembly.
)he eature Manager design tree displays these items for assemblies*
8/18/2019 Assembly of Rotary Feeder
2/12
• )op+le!el assembly the first item-
• arious folders, for example, Annotations and Mates
• Assembly planes and origin
• (omponents subassemblies and indi!idual parts-
• Assembly features cuts or holes- and component patterns
You can expand or collapse each component to !iew its details by clicking beside the
component name. )o collapse all the items in the tree, right+click anywhere in the tree and select
(ollapse $tems.
You can use the same component multiple times within an assembly. or each occurrence of thecomponent in the assembly, the suffix /n0 is incremented.
$n the eature Manager design tree, a component name can ha!e a prefix that pro!ides
information about the state of its relationships to other components. )he prefixes are*
+- 1nder defined
2- "!er defined
f- ixed
3- 4ot sol!ed
)he absence of a prefix indicates that the component5s position is fully defined. See Mate 6rrorsfor information about mate symbols and error messages.
$n )op+down design, parts7 shapes, si8es, and locations can be designed in the assembly. or
example*
• You can model a motor bracket so it is always the correct si8e to hold a motor, e!en if
you mo!e the motor. S"#$%W"&'S automatically resi8es the motor bracket. )his
capability is particularly helpful for parts like brackets, fixtures, and housings, whose
purpose is largely to hold other parts in their correct positions. You can also use top+down
design on certain features such as locating pins- of otherwise bottom+up parts.
8/18/2019 Assembly of Rotary Feeder
3/12
• )he design of photocopier can be laid out in a layout sketch, whose elements represent
the pulleys, drums, belts, and other components of the photocopier. You create the 9%
components based on this sketch. As you mo!e or resi8e elements in the sketch,
S"#$%W"&'S automatically mo!es or resi8es the 9% components in the assembly. )he
speed and flexibility of the sketch allows you to try se!eral !ersions of the design before
building any 9% geometry, and to make many types of changes in one central location.
)he ad!antage of top+down design is that much less rework is needed when design changes
occur. )he parts know how to update themsel!es based on the way you created them.
You can use top+down design techni:ues on certain features of a part, complete parts, or entire
assemblies. $n practice, designers typically use top+down techni:ues to lay out their assemblies
and to capture key aspects of custom parts specific to their assemblies.
Mates create geometric relationships between assembly components. As you add mates, you
define the allowable directions of linear or rotational motion of the components. You can mo!e a
component within its degrees of freedom, !isuali8ing the assembly7s beha!ior.
Some examples include*
• A coincident mate forces two planar faces to become coplanar. )he faces can mo!e along
one another, but cannot be pulled apart.
• A concentric mate forces two cylindrical faces to become concentric. )he faces can mo!e
along the common axis, but cannot be mo!ed away from this axis.
Mates are sol!ed together as a system. )he order in which you add mates does not matter; all
mates are sol!ed at the same time. You can suppress mates
8/18/2019 Assembly of Rotary Feeder
4/12
ully defined sketch
&edundant perpendicular relation added. Sketch is still fully defined
&edundant dimension added. Sketch is o!er defined.
&obustness andPerformance
Mate components to a common component for optimum performance.
8/18/2019 Assembly of Rotary Feeder
5/12
&obustness 1se face+to+face mates, if your design intent permits, because they tend to be
more robust and predictable.
Performance 1se subassemblies to limit the number of top+le!el mates. )he application
sol!es all top le!el mates whene!er it rebuilds an assembly.
(lick Assembly 6xpert )ools toolbar- to display assembly statistics.
6fficiency when
adding mates • 1se mate references if your models use similar components that you
need to replace regularly. (lick Mate &eference &eference
=eometry toolbar- and set the mates.
• 1se Smart Mates.
8/18/2019 Assembly of Rotary Feeder
6/12
Types of Mates
1 Standard Mates
Standard mates include angle, coincident, concentric, distance, lock, parallel, perpendicular, and
tangent mates.
2 Ad!anced Mates
Ad!anced mates include limit, linear>linear coupler, path, symmetry, and width mates.
3 Mechanical Mates
Mechanical mates include cam+follower, gear, hinge, rack and pinion, screw, and uni!ersal
8/18/2019 Assembly of Rotary Feeder
7/12
)he assembly of rotary feeder consists of !arious subassemblies like
?. Subassembly of guide roller @. Sub assembly of bearing
9. Subassembly of feeder hopper
. Subassembly of holding rodB. Subassembly of shaft coupling
SUBASSEMBLY OF FEEDER COVER
8/18/2019 Assembly of Rotary Feeder
8/12
irst of all the basic component is to be imported in the solid works assembly program after that
rest of the parts can be inserted in the assembly one by one as in this assembly of feeder co!er is
done by
8/18/2019 Assembly of Rotary Feeder
9/12
$n this sub assembly of the rotary feeder this is ha!ing the name of feeder hopper as in this )he
drawing is consist of feeder hopper and feeder chute these parts of rotary feeder are
8/18/2019 Assembly of Rotary Feeder
10/12
)his subassembly of the rotary feeder. $n this assembly there !ery small components are used but
all the components used in in this assembly plays an important role to work the feeder at it
maximum capacity because this the only part which hold the feeder at different angle so that it
can fill up the tanks in cement handling plant at its maximum efficiency in order to ser!e the
plants the small parts used in the holding rod bearing, bearing cap , shaft, bush bearing, and the
holding bar which is connected the feeder chute
E!LODED VIE" OF FEEDER HOER ASSEMBLY
8/18/2019 Assembly of Rotary Feeder
11/12
An exploded !iew shows an assembly7s components spread out, but positioned to show how they
fit together when assembled. You create exploded !iews by selecting and dragging parts in the
graphics area, creating one or more explode steps. $n exploded !iews you can*
6!enly space exploded stacks of components hardware, washers, and so on-.
&adially explode components about an axis.
%rag and auto+space multiple components.
Attach a new component to the existing explode steps of another component. )his is useful if
you add a new part to an assembly that already has an exploded !iew.
$f a subassembly has an exploded !iew, reuse that !iew in a higher+le!el assembly.
Add explode lines to indicate component relationships.
While an assembly is exploded, you cannot add mates to the assembly.
FINAL ASSEMBLY OF ROTARY FEEDER
8/18/2019 Assembly of Rotary Feeder
12/12
)he abo!e showed figure displays the final assembly of the rotary feeder it consists all of its
parts to work and in solid work its functioning is defined all the mates whether it standard,
ad!anced and mechanical mates