77
ATB8MONOBLOC
CABINET
ATB8 MONOBLOC CABINET
from left:- detail of cable entry plates- detail of double cable entry
- detail of mounting plate sliding mechanism
finishing profile
removable back
mounting plate included in the supply
frame, roof and sidewall are one integral piece
easy-to-assemble modular plinth ATZE(dedicated crosspieces)
innovative cable-entry floor using modular cable conduit plates (double cable entry
for enclosures larger than 1200)
CABINETS
closing system with:• 3 points for H=1600,
• 4 points for H=1800-2000,with possibility to mount different inserts
www.klinkmann.com
78 ATB8 MONOBLOC CABINET
DIMENSIONSW X H X D
CABINET WITH GLAZED DOOR
(2)
CABINET WITH BLANK DOOR
(1) UNIVERSAL CORNER PIECES H=100
ATZE-A100
PLINTH H=100
FRONT CROSSPIECES
ATZE-T0600
SIDE CROSSPIECES
ATZE-T0400BATZE-T0400BATZE-T0500BATZE-T0400BATZE-T0500BATZE-T0400BATZE-T0400BATZE-T0500BATZE-T0400BATZE-T0500BATZE-T0400BATZE-T0400BATZE-T0500BATZE-T0400BATZE-T0500BATZE-T0400BATZE-T0400BATZE-T0400BATZE-T0400BATZE-T0500BATZE-T0400BATZE-T0500BATZE-T0400BATZE-T0400BATZE-T0400BATZE-T0400BATZE-T0400B
ATZE-T0600ATZE-T0600ATZE-T0600ATZE-T0600ATZE-T0800ATZE-T0800ATZE-T0800ATZE-T0800ATZE-T0800ATZE-T1000ATZE-T1000ATZE-T1000ATZE-T1000ATZE-T1000ATZE-T1200ATZE-T1200ATZE-T1200ATZE-T1200ATZE-T1200ATZE-T1200ATZE-T1200ATZE-T1400ATZE-T1600ATZE-T1600ATZE-T1600ATZE-T1800
ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100
ATB8061604PR600 X 1600 X 400ATB8061804PRATB8061805PRATB8062004PRATB8062005PRATB8081604PRATB8081804PRATB8081805PRATB8082004PRATB8082005PRATB8101604PRATB8101804PRATB8101805PRATB8102004PRATB8102005PRATB8120804PR*ATB8121004PR*ATB8121604PRATB8121804PRATB8121805PRATB8122004PRATB8122005PRATB8141004PR*ATB8161004PR*ATB8161804PRATB8162004PRATB8181004PR*
ATB8061604PXATB8061804PXATB8061805PXATB8062004PXATB8062005PXATB8081604PXATB8081804PXATB8081805PXATB8082004PXATB8082005PXATB8101604PXATB8101804PXATB8101805PXATB8102004PXATB8102005PX
600 X 1800 X 400600 X 1800 X 500600 X 2000 X 400600 X 2000 X 500800 X 1600 X 400800 X 1800 X 400800 X 1800 X 500800 X 2000 X 400800 X 2000 X 5001000 X 1600 X 4001000 X 1800 X 4001000 X 1800 X 5001000 X 2000 X 4001000 X 2000 X 5001200 X 800 X 4001200 X 1000 X 4001200 X 1600 X 4001200 X 1800 X 4001200 X 1800 X 5001200 X 2000 X 4001200 X 2000 X 5001400 X 1000 X 4001600 X 1000 X 4001600 X 1800 X 4001600 X 2000 X 4001800 X 1000 X 400
(1) supply includes fully welded frame with removable rear panel, blank door and ATPA mounting plate. To be ordered separately plinth and eyebolts WTGS-003
(2) supply includes fully welded frame with removable rear panel, glazed door and ATPA mounting plate. To be ordered separately plinth and eyebolts WTGS-003
(*) ATB8 for widths up to 1800mm
MAIN ACCESSORIES
Note: to order an ATPA mounting plate (as a spare part), check on page 36.
79 ATB8 MONOBLOC CABINET
ATB8 CABINET WITH SINGLE DOOR
CHARACTERISTICS- STRUCTURECabinet structure manufactured from 15/10 sheet steel with removable rear panel.Door manufactured from 20/10 sheet steel with door stiffening frame.
PAINT FINISHETA standard epoxy polyester powder coating.Colour: RAL 7035 textured finish.
DELIVERY- cabinet structure- door complete with Ø 3mm double bar locking system- adjustable cable entry- mounting plate manufactured from 25/10 sendzimir sheet steel
(for ATB8 W=1000, mounting plate manufactured from 30/10 sendzimir sheet steel)
CONFORMITY AND APPROVAL
PROTECTION RATINGS - IP 66 complying with IEC EN62208; EN60529- NEMA 12 complying with UL508A; UL50- protection degree guaranteed by the two-component polyurethane
foam seal (for technical details, refer to page 260)- impact resistance IK10 complying with IEC EN62208; EN50102.
MAIN ACCESSORIES
ATZE modular plinth (see page 86)
eyebolts (see page 87)
CABINETS
80 ATB8 MONOBLOC CABINET
DIMENSIONAL SPECIFICATIONS
WIDTH DEPTHCABINET DIMENSIONSDIMENSIONS FLOOR FIXING CABLE ENTRY DOOR SPACE
HEIGHT600 1609 395 310 250 313
1809 395 310 250 313174 445174
14301630445600
B P D E F M N16006001800
A C400400600
1809 495 310 350 313 274 16304456001800 5006002009 395 310 250 313 174 18304456002000 4006002009 495 310 350 313 274 18304456002000 5006001609 395 510 250 513 174 14306458001600 4008001809 395 510 250 513 174 16306458001800 4008001809 495 510 350 513 274 16306458001800 5008002009 395 510 250 513 174 18306458002000 4008002009 495 510 350 513 274 18306458002000 5008001609 395 710 250 713 174 143084510001600 40010001809 395 710 250 713 174 163084510001800 40010001809 495 710 350 713 274 163084510001800 50010002009 395 710 250 713 174 183084510002000 40010002009 495 710 350 713 274 183084510002000 5001000
MOUNTING PLATE DIM.
485 14801680485
L H
1680485188048518804851480685168068516806851880685188068514808851680885168088518808851880885
350350
I
450350450350350450350450350350450350450
inner mounting plate
Note: if an inner door is needed, please check the code ATPI on page 43.
81 ATB8 MONOBLOC CABINET
ATB8 600 WIDE
ATB8 800 WIDE
ATB8 1000 WIDE
CABINET CODESCABINET DIMENSIONS CABINET WITH BLANK DOOR CABINET WITH GLAZED DOOR
600 1600 4001800 400
ATB8061604PR ATB8061604PXATB8061804PXATB8061804PR600
1800 500 ATB8061805PXATB8061805PR6002000 400 ATB8062004PXATB8062004PR6002000 500 ATB8062005PXATB8062005PR600
WIDTH DEPTHHEIGHT
CABINET CODESCABINET DIMENSIONS CABINET WITH BLANK DOOR CABINET WITH GLAZED DOOR
800 1600 4001800 400
ATB8081604PR ATB8081604PXATB8081804PXATB8081804PR800
1800 500 ATB8081805PXATB8081805PR8002000 400 ATB8082004PXATB8082004PR8002000 500 ATB8082005PXATB8082005PR800
WIDTH DEPTHHEIGHT
CABINET CODESCABINET DIMENSIONS CABINET WITH BLANK DOOR CABINET WITH GLAZED DOOR
1000 1600 4001800 400
ATB8101604PR ATB8101604PXATB8101804PXATB8101804PR1000
1800 500 ATB8101805PXATB8101805PR10002000 400 ATB8102004PXATB8102004PR10002000 500 ATB8102005PXATB8102005PR1000
WIDTH DEPTHHEIGHT
Note: if an inner door is needed, please check the code ATPI on page 43.
Note: if an inner door is needed, please check the code ATPI on page 43.
CABINETS
Note: to order an ATPA mounting plate (as a spare part), check on page 36.
82 ATB8 MONOBLOC CABINET
ATB8 CABINET WITH DOUBLE DOOR
CHARACTERISTICS- STRUCTURECabinet structure manufactured from 15/10 sheet steel with removable rear panel.Door manufactured from 20/10 sheet steel with door stiffening frame.
PAINT FINISHETA standard epoxy polyester powder coating.Colour: RAL 7035 textured finish.
DELIVERY- cabinet structure- door complete with Ø 3mm double bar locking system- adjustable cable entry.- mounting plate manufactured from 30/10 sendzimir sheet steel
CONFORMITY AND APPROVAL
PROTECTION RATINGS- IP 55 complying with IEC EN62208; EN60529- NEMA 12 complying with UL508A; UL50- protection degree guaranteed by the two-component polyurethane
foam seal (for technical details, refer to page 260)- impact resistance IK10 complying with IEC EN62208; EN50102.
MAIN ACCESSORIES
ATZE modular plinth (see page 86)
eyebolts (see page 87)
83 ATB8 MONOBLOC CABINET
DIMENSIONAL SPECIFICATIONS
WIDTH DEPTHCABINET DIMENSIONSDIMENSIONS FLOOR FIXING CABLE ENTRY DOOR SPACE MOUNTING PLATE DIM.
HEIGHT1200 1609 395 910 250 421
1809 395 910 250 421174 445174
143016304451200
B P D E F M N160012001800
A C4004001200
1809 495 910 350 421 274 163044512001800 50012002009 395 910 250 421 174 183044512002000 40012002009 495 910 350 421 274 183044512002000 50012001809 395 1310 250 621 174 163064516001800 40016002009 395 1310 250 621 174 183064516002000 4001600
1085 148016801085
L IH
168010851880108518801085
350350450350450
1680148518801485
350350
CABINETS
Note: to order an ATPA mounting plate (as a spare part), check on page 85.
84 ATB8 MONOBLOC CABINET
ATB8 1200 WIDE
ATB8 1600 WIDE
CABINET CODESCABINET DIMENSIONS CABINET WITH BLANK DOOR
1200 1600 4001800 400
ATB8121604PRATB8121804PR1200
1800 500 ATB8121805PR12002000 400 ATB8122004PR12002000 500 ATB8122005PR1200
WIDTH DEPTHHEIGHT
ATB8 HORIZONTAL VERSION
CHARACTERISTICS- STRUCTURECabinet structure manufactured from 15/10 sheet steel with removable rear panel.Door manufactured from 20/10 sheet steel with stiffening profiles.
PAINT FINISHETA standard epoxy polyester powder coating.Colour: RAL 7035 textured finish.
DELIVERY- cabinet structure- door complete with Ø 3mm double bar locking system- adjustable cable entry- mounting plate manufactured from 30/10 sendzimir sheet steel.
CONFORMITY AND APPROVAL
PROTECTION RATINGS- IP 55 complying with IEC EN62208; EN60529- NEMA 12 complying with UL508A; UL50- protection degree guaranteed by the two-component polyurethane
foam seal (for technical details, refer to page 260)- impact resistance IK10 complying with IEC EN62208; EN50102.
MAIN ACCESSORIES
ATZE modular plinth (see page 86)
eyebolts (see page 87)
CABINET CODESCABINET DIMENSIONS CABINET WITH BLANK DOOR
1600 1800 4002000 400
ATB8161804PRATB8162004PR1600
WIDTH DEPTHHEIGHT
To replace the mounting plate ATPA, use the codes listed below.
85 ATB8 MONOBLOC CABINET
CABINET CODESCABINET DIMENSIONS CABINET WITH BLANK DOOR
1200 800 4001000 400
ATB8120804PRATB8121004PR1200
1000 400 ATB8141004PR14001000 400 ATB8161004PR16001000 400 ATB8181004PR1800
WIDTH DEPTHHEIGHT
DIMENSIONAL SPECIFICATIONS
WIDTH DEPTHCABINET DIMENSIONSDIMENSIONS FLOOR FIXING CABLE ENTRY DOOR SPACE
HEIGHT1200 809 395 910 250 420
1009 395 910 250 420174 445174 4451200
B P D E F M80012001000
A C4004001200
1009 395 1110 250 520 174 54514001000 40014001009 395 1310 250 620 174 64516001000 40016001009 395 1510 250 720 174 745
MOUNTING PLATE DIM.
1085 6801085 880
L H
1285 8801485 8801685
350350
I (max)
35035035088018001000 4001800
CABINETS
FRONT INSERTED MOUNTING PLATE (SPARE PART)CABINET DIM.ATPA
CODEMOUNTING PLATE DIM.
ATPA-120080ATPA-120100
A P L HB12001200
8091009
395395
10851085
I (max)350350
680880
ATPA-140100 1400 1009 395 1285 350880ATPA-160100 1600 1009 395 1485 350880ATPA-180100 1800 1009 395 1685 350880
86
ATB8COMPLEMENTARY
ACCESSORIES
ATB8COMPLEMENTARY ACCESSORIES
MODULAR PLINTH ATZE
CHARACTERISTICSCorner pieces manufactured from 25/10 sheet steel, with PVC front covers caps.Front and side crosspieces manufactured from 20/10 press bent sheet steel.
PAINT FINISHETA standard epoxy polyester powder coating.Colour: RAL 7025 textured finish
DELIVERYThe modular plinth is made up of- corner pieces: supply includes 4 pieces complete
with front covers and mounting hardware- front crosspieces: supply includes 2 pieces- side crosspieces: supply includes 2 pieces
Supply includes 2 pieces.
To order the front crosspieces H=200, add the suffix “D” to the code. I.E.: ATZE-T0600D.
Supply includes 4 pieces with mounting accessories.
UNIVERSAL FRONT CROSSPIECESATZE CODE
DESCRIPTION CROSS.LENGTH (mm)
FRONT CROSS. FOR PLINTH W=600 444FRONT CROSS. FOR PLINTH W=800
ATZE-T0600ATZE-T0800 644
FRONT CROSS. FOR PLINTH W=1000ATZE-T1000 844FRONT CROSS. FOR PLINTH W=1200ATZE-T1200 1044FRONT CROSS. FOR PLINTH W=1400ATZE-T1400 1244FRONT CROSS. FOR PLINTH W=1600ATZE-T1600 1444FRONT CROSS. FOR PLINTH W=1800ATZE-T1800 1644
Supply includes 2 pieces.
To order the side crosspieces H=200, add the suffix “D” to the code.I.E.: ATZE-T0400BD.
SIDE CROSSPIECES FOR MONOBLOC ATB8ATZE CODE
DESCRIPTION CROSS. L (mm)
SIDE CROSSPIECES FOR PLINTH D=400 206306SIDE CROSSPIECES FOR PLINTH D=500
ATZE-T0400BATZE-T0500B
UNIVERSAL CORNER PIECESATZE CODE
DESCRIPTION
CORNER PIECES FOR PLINTH H=100ATZE-A100CORNER PIECES FOR PLINTH H=200ATZE-A200
Note: for more information, assembly drawings and dimensional features, please check on page 217.
LOCKING SYSTEM WE
To order locking systems different from the standard one, check on page 67.
87 ATB8COMPLEMENTARY ACCESSORIES
CABLE ENTRY FOAM AND BOTTOM PLATE GASKET EGPT
The bottom of the enclosure is sealed by the use of a gasket on the cable entry section of the bottom plates, guaranteeing a proper IP protection degree.To be mounted on ATB8 cable entry bottom.
CHARACTERISTICSGland plates manufactured from zinc sheet steel and provided with adhesive closed-cell gasket.
DELIVERYSupply includes nr. 2 pieces with mounting accessories.
DRAWING DESK WTRL
The desk provides a stable surface for documents, computer or measuring devices; it can be easily folded and locked within the door frame space. To be mounted directly onto the stiffening frame of ATB8 blank doors.
CHARACTERISTICSManufactured from 15/10 sheet steel.
PAINT FINISHETA standard epoxy polyester powder coating.Colour: RAL 7035 textured finish.
DELIVERYSupply includes nr. 1 piece with mounting accessories.
DRAWING DESK WTRLWTRL CODE
CABINET DIMENSIONS
600800
WTRL000600WTRL000800
WTGS-003
Zincpassivated M12 lifting eyebolts.
DELIVERYSupply includes nr. 2 pieces with nuts and washers.
Available on request.
MICROSWITCH WI100ATB8
Complying with standards IEC 337-VDE 0660.
DELIVERY Supply includes: microswitch, mounting bracket and screws.
CONFORMITY AND APPROVAL
CABINETS