Automotive ProductsRADOX® Cables and System Solutions
Edition 2012
One Source from Start to Finish
Excellence in Connectivity Solutions
Innovation to achieve the goal
The HUBER+SUHNER Group is a leading international manu-facturer of electrical and optical interconnectivity components and systems. Our main markets are communication, transport and industry. Under one roof, we combine technological capa-bilities in the three core fields of Radio Frequency, Fiber Optic and Low Frequency.
Increasing engine efficiency, lower power consumption and smaller space restrictions gave rise to higher temperature in the engine compartment. Temperatures of –70 °C to +200 °C (3000 h) are commonplace. The wiring is exposed to various fluids, such as diesel, oils, battery acids, salt water, cleaning agents and humidity in everyday service. HUBER+SUHNER offers the perfect solution for these special requirements: With the well-known RADOX® range of cables such as single core cables, battery cables and databus cables.
All our products fully comply with the European Directive 2002/95/EC (RoHS).
Excellence in Connectivity Solutions
Content
Automotive wires and cables 7
Automotive system solutions 37
Additional information 41
Low voltage cable for road vehicles, class D and F according to ISO 6722, temperature rating –40 °C to +150 °C / 200 °C
A growing demand of sensors, higher operating temperatures and restricted space are typical in today's motor compartments. These cables have been deve loped with these specific requirements in mind.
These cables are class D temperature range cables with reduced outer diameter. They have superb resis tance to motor oils, fluids and hydrolysis. Thanks to their electron beam crosslinked RADOX insulation, these cables have excellent resistance to extremes of temperature and abrasion even with reduced outer diameter. Furthermore these RADOX cables have outstanding electrical characteristics.
The characteristics of these RADOX cables make them ideal for use in a wide range of applications where space is at a premium and where cables are subjected to high temperatures. Even high humidity levels and motor vehicle fluids do not negatively affect the lifetime of the cables.
General features
• Operating temperature range –55 °C to +200 °C• Reduced outer diameter• Resistant to motor fluids, fuels• Hydrolysis resistant• Resistant to pressure at high temperatures• High abrasion resistance• Excellent electrical characteristics
RADOX® Automotive single Core Cables
RADOX® 155S FLR 8
RADOX® 155S RW 10 ETFE 12
RADOX® anticapillary 14
7HUBER+SUHNER
12
RADOX® 155S FLR
Number of conductors 1Cross section 0.35 – 6 mm2
Voltage rating 60 / 600 V DCTemperature range (–55 °C) –40 °C to +150 °C (3000 h)Min. bending radius 3 x cable dia.
Composition of cable
1. Conductor stranded tinned or bare copper2. Insulation RADOX® 155S, extruded radiation cross-linked polyolefin, various colours
Characteristics and specialities
• High and low temperature resistance• Ozone and weathering resistance• Resistant to pressure at high temperature• Resistant to motor oils, fuels and hydrolysis• Flame retardant• High abrasion resistance• Easy to strip and process
Application
Low voltage cable for use in road vehicle applications, such as motor wiring, fan motor or sensor applications.
Standards
Conductor General
DIN 72551 part 6 ISO 6722 class D, thin wall
ISO 6722 DIN 72551 part 5 (1993)
DIN EN 13602, Cu-ETP1-A (CW003A) LV 112
For further technical details please refer to our data sheet.
8 HUBER+SUHNER
Cross section ConductorConductor resistance @ 20 °C
max. Ω/kmCore Weight
mm2construction*
n x mmdiameter
.
max. mmtinned bare
wall thickness min. mm
diameter mm
kg/100 m nom.
0.35 7 x 0.26 0.8 54.5 52.0 0.20 1.25 ± 0.05 0.4
0.5 19 x 0.19 1.0 38.2 37.1 0.22 1.50 ± 0.10 0.6
0.75 19 x 0.23 1.2 25.4 24.7 0.24 1.80 ± 0.10 0.9
1.0 19 x 0.26 1.35 19.1 18.5 0.24 2.00 ± 0.10 1.1
1.5 19 x 0.32 1.7 13.0 12.7 0.24 2.30 ± 0.10 1.6
2.5 19 x 0.41 2.2 7.8 7.6 0.28 2.85 ± 0.15 2.6
RADOX® 155S FLR
Extract from our delivery programme
Dimensions according to DIN 72551 part 6 type A
Dimensions according to DIN 72551 part 6 type B
Dimensions according to ISO 6722
Cross- section ConductorConductor resistance @ 20 °C
max. Ω/kmCore Weight
mm2construction*
n x mmdiameter
.
max. mmtinned bare
wall thickness min. mm
diameter mm
kg/100 m nom.
0.75 24 x 0.21 1.2 25.4 24.7 0.24 1.80 ± 0.10 0.9
1.0 32 x 0.21 1.35 19.1 18.5 0.24 2.00 ± 0.10 1.1
1.5 30 x 0.26 1.7 13.0 12.7 0.24 2.30 ± 0.10 1.6
2.5 50 x 0.26 2.2 7.8 7.6 0.28 2.85 ± 0.15 2.6
4.0 56 x 0.31 2.75 4.8 4.7 0.32 3.55 ± 0.15 4.2
6.0 84 x 0.31 3.3 3.2 3.1 0.32 4.15 ± 0.15 6.1
* typical value x max. single wire diameter
Cross section ConductorConductor resistance @ 20 °C
max. Ω/kmCore Weight
mm2construction*
n x mmdiameter
.
max. mmtinned bare
wall thickness min. mm
diameter mm
kg/100 m nom.
4.0 37 x 0.38 2.75 4.80 4.70 0.32 3.55 ± 0.15 4.2
6.0 37 x 0.46 3.30 3.20 3.10 0.32 4.15 ± 0.15 6.1
9HUBER+SUHNER
12
RADOX® 155S RW
Number of conductors 1Cross section 0.14 – 1 mm2
Voltage rating 60 V DCTemperature range (–55 °C) –40 °C to +150 °C (3000 h)Min. bending radius 3 x cable dia.
Composition of cable
1. Conductor stranded, tin plated2. Insulation RADOX® 155S, extruded radiation cross-linked polyolefin, various colours
Characteristics and specialities
• High and low temperature resistance• Ozone and weathering resistance• Resistant to pressure at high temperature• Resistant to motor oils, fuels and hydrolysis• Flame retardant• High abrasion resistance• Easy to strip and process
Application
Low voltage cable for use in road vehicle applications, such as motor wiring, fan motor or sensor applications.
Standards
Conductor General
DIN 72551 part 6 ISO 6722 class D, ultra thin wall
ISO 6722
DIN EN 13602, Cu-ETP1-A (CW003A)
For further technical details please refer to our data sheet.
10 HUBER+SUHNER
RADOX® 155S RW
Extract from our delivery programme
Cross section Conductor Core Weight
mm2construction*
n x mmdiameter
.
max. mmresistance @ 20 °C
max.Ω/kmwall thickness
min. mmdiameter
mmkg/100 m
nom.
0.14 19 x 0.10 0.51 135.5 0.19 0.95 ± 0.05 0.3
0.25 19 x 0.13 0.61 86.0 0.20 1.10 ± 0.05 0.3
0.35 19 x 0.16 0.80 54.5 0.20 1.25 ± 0.05 0.4
0.50 19 x 0.19 0.91 38.2 0.20 1.40 ± 0.05 0.6
0.75 19 x 0.23 1.12 25.4 0.21 1.65 ± 0.05 0.8
1.0 19 x 0.26 1.26 19.1 0.22 1.80 ± 0.05 1.0
* typical value x max. single wire diameter
11HUBER+SUHNER
12
ETFE
Number of conductors 1Cross section 0.14 – 6 mm2
Voltage rating 60 / 600 V DCTemperature range (–55 °C) –40 °C to +200 °C (3000 h)Min. bending radius 3 x cable dia.
Composition of cable
1. Conductor stranded bare copper 2. Insulation ETFE, extruded fluoropolymer, various colours
Characteristics and specialities
• High and low temperature resistance• Ozone and weathering resistance• Resistant to pressure at high temperature• Resistant to hot motor oils, fuels and hydrolysis• Flame retardant• High abrasion resistance• Easy to strip and process
Application
Low voltage cable for use in road vehicle applications, where constant hot oil immersion is required.
Standards
Conductor General
DIN 72551 part 6 ISO 6722 class F, thin wall and ultra thin wall
ISO 6722
DIN EN 13602, Cu-ETP1-A (CW003A)
For further technical details please refer to our data sheet.
12 HUBER+SUHNER
ETFE
Extract from our delivery programme
* typical value x max. single wire diameter
Cross section Conductor Core Weight
mm2construction*
n x mmdiameter
.
max. mmresistance @ 20 °C, max.Ω/km,bare
wall thickness min. mm
diameter mm
kg/100 m nom.
0.35 7 x 0.26 0.8 52.0 0.20 1.25 ± 0.05 0.4
0.5 19 x 0.19 1.0 37.1 0.22 1.50 ± 0.10 0.6
0.75 19 x 0.23 1.2 24.7 0.24 1.80 ± 0.10 1.0
1.0 19 x 0.26 1.35 18.5 0.24 2.00 ± 0.10 1.2
1.5 19 x 0.32 1.7 12.7 0.24 2.30 ± 0.10 1.7
2.5 50 x 0.26 2.0 7.6 0.28 2.85 ± 0.15 2.7
4.0 56 x 0.31 2.75 4.7 0.32 3.55 ± 0.15 4.3
6.0 84 x 0.31 3.3 3.1 0.32 4.15 ± 0.15 6.2
Ultra thin wall designs on request.
Dimensions according to DIN 72551 part 6 type A and B
13HUBER+SUHNER
12
RADOX® anticapillary (single Insulation)
Number of conductors 1Cross section 0.35 – 2.5 mm2
Voltage rating 60 / 600 V DCTemperature range (–55 °C) –40 °C to +150 °C (3000 h)Min. bending radius 3 x cable dia.
Composition of cable
1. Conductor stranded tinned or bare copper, special coating2. Insulation RADOX® 155S, extruded radiation cross-linked polyolefin, various colours
Characteristics and specialities
• Barrier sealed, avoids penetration of fluids along conductor (fluids such as water and AdBlue)• High and low temperature resistance• Ozone and weathering resistance• Resistant to pressure at high temperature• Resistant to motor oils, fuels and hydrolysis• Flame retardant• High abrasion resistance• Easy to strip and process
Application
Low voltage cable with anticapillary properties for use in road vehicle applications.
Standards
Conductor General
DIN 72551 part 6 ISO 6722 class D, thin wall
ISO 6722 DIN 72551 part 5 (1993)
DIN EN 13602, Cu-ETP1-A (CW003A) LV 112
For further technical details please refer to our data sheet.
14 HUBER+SUHNER
RADOX® anticapillary (single Insulation)
Extract from our delivery programme
* typical value x max. single wire diameter
Cross section ConductorConductor resistance @ 20 °C
max. Ω/kmCore Weight
mm2construction*
n x mmdiameter
.
max. mmtinned bare
wall thickness min. mm
diameter mm
kg/100 m nom.
0.35 7 x 0.26 0.8 54.5 52.0 0.20 1.25 ± 0.05 0.4
0.5 19 x 0.19 1.0 38.2 37.1 0.22 1.50 ± 0.10 0.6
0.75 19 x 0.23 1.2 25.4 24.7 0.24 1.80 ± 0.10 0.9
1.0 19 x 0.26 1.35 19.1 18.5 0.24 2.00 ± 0.10 1.1
1.5 19 x 0.32 1.7 13.0 12.7 0.24 2.30 ± 0.10 1.6
2.5 19 x 0.41 2.2 7.8 7.6 0.28 2.85 ± 0.15 2.6
Dimensions according to DIN 72551 part 6 type A
15HUBER+SUHNER
123
RADOX® anticapillary (double Insulation)
Number of conductors 1Cross section 0.35 – 2.5 mm2
Voltage rating 60 / 600 V DCTemperature range (–55 °C) –40 °C to +150 °C (3000 h)Min. bending radius 3 x cable dia.
Composition of cable
1. Conductor stranded tinned or bare copper, special coating2. Insulation RADOX® 155S, extruded radiation cross-linked polyolfin 3. Insulation extruded fluoropolymer, various colours, for hot oil applications
Characteristics and specialities
• Barrier sealed, avoids penetration of fluids along conductor (fluids such as water, AdBlue and hot oils)• High and low temperature resistance• Ozone and weathering resistance• Resistant to pressure at high temperature• Resistant to motor oils, fuels and hydrolysis• Flame retardant• High abrasion resistance• Easy to strip and process
Application
Low voltage cable with anticapillary properties for use in road vehicle applications.
Standards
Conductor General
DIN 72551 part 6 ISO 6722 class D, thin wall
ISO 6722 DIN 72551 part 5 (1993)
DIN EN 13602, Cu-ETP1-A (CW003A) LV 112
For further technical details please refer to our data sheet.
16 HUBER+SUHNER
RADOX® anticapillary (double Insulation)
Extract from our delivery programme
* typical value x max. single wire diameter
Cross section ConductorConductor resistance @ 20 °C
max. Ω/kmCore Weight
mm2construction*
n x mmdiameter
.
max. mmtinned bare
wall thickness min. mm
diameter mm
kg/100 m nom.
0.35 7 x 0.26 0.8 54.5 52.0 0.20 1.25 ± 0.05 0.4
0.5 19 x 0.19 1.0 38.2 37.1 0.22 1.50 ± 0.10 0.6
0.75 19 x 0.23 1.2 25.4 24.7 0.24 1.80 ± 0.10 0.9
1.0 19 x 0.26 1.35 19.1 18.5 0.24 2.00 ± 0.10 1.1
1.5 19 x 0.32 1.7 13.0 12.7 0.24 2.30 ± 0.10 1.6
2.5 19 x 0.41 2.2 7.8 7.6 0.28 2.85 ± 0.15 2.6
Dimensions according to DIN 72551 part 6 type A
17HUBER+SUHNER
RADOX® Battery Cables
Thinwall, flexible
Power cables for road vehicles, class D according to ISO 6722,operating temperature –40 °C to +150 °C
RADOX battery cables are high temperature re sis tant products with a reduced outer diameter.
The cable is highly resistant to temperature, ozone, weathering, hydrolysis and has excellent resistance to battery acid and cooling agents. It is also resistant against oils, fuels and other fluids used inside and outside of the motor compartment.
Thanks to its electron beam crosslinked RADOX insulation, the cable has, despite the reduced outer diameter, excellent resistance to heat pressure and abrasion. In addition, the RADOX battery cable has outstanding dielectric properties. The flame retardant insulation does not melt or flow at high temperatures and is easy to strip.
General features
• Operating temperature –70 °C to +150 °C• Outstanding flexibility• Reduced outer diameter• Resistant to motor oils, battery acid and fuels• High resistance to heat pressure• Excellent abrasion resistance
RADOX® Elastomer S battery cable 20
RADOX® 155 battery cable 22 RADOX® screened battery cable 24
RADOX® screened multi core cable 26
19HUBER+SUHNER
123
RADOX® Elastomer S Battery Cable
Number of conductors 1Cross section 10 – 150 mm2
Voltage rating 600 / 1000 V ACTemperature range (–55 °C) –40 °C to +150 °C (3000 h)Min. bending radius 3 x cable dia.
Composition of cable
1. Conductor stranded bare copper 2. Plastic tape optional3. Insulation RADOX® Elastomer S (REMS), extruded radiation cross- linked copolymer, various colours
Characteristics and specialities
• Excellent high and low temperature resistance• Very flexible• Ozone and weathering resistance• Outstanding resistance against battery acids, diesel, various oils, engine coolant and window washer fluids• Resistance against humidity, petrol and brake fluids• Flame retardant• Easy to strip and process
Application
Battery or power cable for use in road vehicle applications.
Standards
Conductor General
ISO 6722 ISO 6722 class D, thin wall
DIN EN 13602, Cu-ETP1-A (CW003A) LV112
For further technical details please refer to our data sheet.
20 HUBER+SUHNER
RADOX® Elastomer S Battery Cable
Extract from our delivery programme
Cross section Conductor Core Weight
mm2
number of individual wires
guide value
diameter of individual wires
max. mm
diameter.
max. mm
resistance @ 20 °C max.Ω/km
wall thickness min. mm
diameter mm
kg/100 m nom.
10 78 0.41 4.3 1.82 0.50 5.75 ± 0.15 10.6
12 92 0.41 4.6 1.52 0.50 6.05 ± 0.15 12.1
16 126 0.41 5.5 1.16 0.52 6.90 ± 0.20 16.4
20 154 0.41 6.3 0.955 0.52 7.70 ± 0.20 20.0
25 189 0.41 6.7 0.743 0.55 8.20 ± 0.20 24.2
30 224 0.41 7.4 0.647 0.65 9.10 ± 0.20 29.1
35 273 0.41 7.9 0.527 0.65 9.70 ± 0.25 34.5
40 301 0.41 8.5 0.473 0.73 10.40 ± 0.25 38.0
50 385 0.41 9.4 0.368 0.80 11.50 ± 0.25 48.6
60 294 0.51 10.5 0.315 0.80 12.60 ± 0.25 56.2
70 360 0.51 11.6 0.259 0.80 13.70 ± 0.25 68.7
95 480 0.51 13.5 0.196 0.90 16.25 ± 0.30 93.6
120 589 0.51 15.1 0.153 0.90 18.00 ± 0.30 113.7
150 703 0.51 16.8 0.129 1.00 19.80 ± 0.30 142.6
21HUBER+SUHNER
123
RADOX® 155 Battery Cable
Number of conductors 1Cross section 10 – 150 mm2
Voltage rating 600 / 1000 V ACTemperature range (–55 °C) –40 °C to +150 °C (3000 h)Min. bending radius 3 x cable dia.
Composition of cable
1. Conductor stranded bare copper 2. Plastic tape optional3. Insulation RADOX® 155, extruded radiation cross-linked polyolefin, various colours
Characteristics and specialities
• Excellent high and low temperature resistance• Ozone, weathering and hydrolysis resistance• Outstanding resistance against battery acids, humidity, petrol, brake fluids, engine coolant, window washer
fluids, diesel and various oils• Flame retardant• Easy to strip and process
Application
Battery or power cable for use in road vehicle applications.
Standards
Conductor General
ISO 6722 ISO 6722 class D, thin wall
DIN EN 13602, Cu-ETP1-A (CW003A) LV112
For further technical details please refer to our data sheet.
22 HUBER+SUHNER
RADOX® 155 Battery Cable
Extract from our delivery programme
Cross section Conductor Core Weight
mm2
number of individual wires
guide value
diameter of individual wires
max. mm
diameter.
max. mm
resistance @ 20 °C max.Ω/km
wall thickness min. mm
diameter mm
kg/100 m nom.
10 78 0.41 4.3 1.82 0.50 5.75 ± 0.15 10.6
12 92 0.41 4.7 1.52 0.50 6.05 ± 0.15 12.1
16 126 0.41 5.5 1.16 0.52 6.90 ± 0.20 16.4
20 154 0.41 6.3 0.955 0.52 7.70 ± 0.20 20.0
25 189 0.41 6.7 0.743 0.55 8.20 ± 0.20 24.2
30 224 0.41 7.4 0.647 0.65 9.10 ± 0.20 29.1
35 273 0.41 7.9 0.527 0.65 9.70 ± 0.25 34.5
40 301 0.41 8.5 0.473 0.73 10.40 ± 0.25 38.0
50 385 0.41 9.4 0.368 0.80 11.50 ± 0.25 48.6
60 294 0.51 10.5 0.315 0.80 12.60 ± 0.25 56.2
70 360 0.51 11.6 0.259 0.80 13.70 ± 0.25 68.7
95 480 0.51 13.5 0.196 0.90 16.25 ± 0.30 93.6
120 589 0.51 15.1 0.153 0.90 18.00 ± 0.30 113.7
150 703 0.51 16.8 0.129 1.00 19.80 ± 0.30 142.6
23HUBER+SUHNER
123456
RADOX® screened Battery Cable
Number of conductors 1Cross section 1.5 – 150 mm2
Voltage rating 600 / 1000 V ACTemperature range (–55 °C) –40 °C to +150 °C (3000 h)Min. bending radius 4 x cable dia.
Composition of cable
1. Conductor stranded bare copper2. Tape plastic 3. Insulation RADOX® 155S for 1.5, 2.5, 4.0, 6.0 mm2; RADOX® 155 for > 6 mm2
4. EMC screen tin plated copper braid optimised5. Tape plastic or aluminium screen (optional)6. Sheath RADOX® Elastomer S, colour: orange
Characteristics and specialities
• Excellent high and low temperature resistance• Ozone and weathering resistance• Outstanding resistance against battery acid, diesel, various oils, engine coolant and window washer fluids• Resistance against humidity, petrol and brake fluids• Flame retardant• Soldering iron resistant• Easy to strip and process
Application
Screened power cable for use in hybrid and electrical vehicles.
Standards
Conductor General
ISO 6722 ISO 6722 class D, thin wall
DIN EN 13602, Cu-ETP1-A (CW003A) LV 216
For further technical details please refer to our data sheet.
24 HUBER+SUHNER
RADOX® screened Battery Cable
Extract from our delivery programme
Cross section
Conductor Core Weight
mm2
number of individual wires
guide value
diameter of individual wires
max. mm
Diameter.
max. mm
resistance @ 20 °C max.Ω/km
diameter of insulation
nom. mm
diameter of screen max. mm
overall diameter
mm
ZT @
< 30MHz nom.mΩ/m
kg/100 m nom.
1.5 19 0.32 1.7 12.7 2.3 2.8 3.90 ± 0.20 150 3.2
2.5 50 0.26 2.0 7.6 2.85 3.3 5.00 ± 0.20 100 4.8
4 56 0.31 2.5 4.71 3.55 4.0 5.80 ± 0.20 110 6.9
6 84 0.31 3.0 3.14 4.15 4.7 6.60 ± 0.30 70 9.7
8 60 0.41 3.8 2.38 5.05 5.6 7.60 ± 0.30 70 12.5
10 78 0.41 4.3 1.82 5.75 6.3 8.40 ± 0.30 70 15.6
12 92 0.41 4.7 1.52 6.05 6.7 8.90 ± 0.30 60 18.0
16 126 0.41 5.5 1.16 6.9 7.5 9.70 ± 0.30 50 23.0
20 154 0.41 6.3 0.955 7.7 8.3 10.60 ± 0.30 50 27.9
25 189 0.41 6.7 0.743 8.2 8.9 11.20 ± 0.30 50 33.0
30 224 0.41 7.4 0.647 9.1 9.8 12.10 ± 0.30 50 38.2
35 273 0.41 7.9 0.527 9.7 10.4 12.70 ± 0.30 40 44.8
40 301 0.41 8.5 0.473 10.4 11.3 13.60 ± 0.30 40 50.9
50 385 0.41 9.4 0.368 11.5 12.8 14.90 ± 0.30 30 63.2
60 294 0.51 10.5 0.315 12.6 13.5 15.90 ± 0.30 30 73.4
70 360 0.51 11.6 0.259 13.7 14.6 17.00 ± 0.30 20 85.0
95 480 0.51 13.5 0.196 16.25 17.4 19.90 ± 0.40 20 114.2
120 589 0.51 15.1 0.153 18.0 19.1 22.60 ± 0.40 20 145.0
25HUBER+SUHNER
12345
RADOX® screened multi Core Cable
Number of conductors 2 – 5Cross section 1.5 – 70 mm2
Voltage rating 600 / 1000 V ACTemperature range (–55 °C) –40 °C to +150 °C (3000 h)Min. bending radius 4 x cable dia.
Composition of cable
1. Conductor stranded bare copper2. Insulation RADOX® 155S3. EMC screen tin plated copper braid optimised4. Tape plastic or aluminium screen (optional)5. Sheath RADOX® Elastomer S, colour: orange
Characteristics and specialities
• Excellent high and low temperature resistance• Ozone and weathering resistance• Outstanding resistance against battery acid, diesel, various oils, engine coolant and window washer fluids• Resistance against humidity, petrol and brake fluids• Flame retardant• Soldering iron resistant• Easy to strip and process
Application
Screened power cable for use in hybrid and electrical vehicles.
Standards
Conductor General
ISO 6722 ISO 6722 class D, thin wall
DIN EN 13602, Cu-ETP1-A (CW003A) LV 216
For further technical details please refer to our data sheet.
26 HUBER+SUHNER
RADOX® screened multi Core Cable
Extract from our delivery programme
Cross- section
Conductor Core Weight
n x mm2
number of individual wires
guide value
diameter of individual wires
max. mm
diameter. max. mm
resistance @ 20 °C max.Ω/km
diameter of insulation
nom. mm
diameter of screen max. mm
overall diameter
mm
ZT @
< 30 MHz nom.mΩ/m
kg/100 m nom.
3 x 1.5 19 0.32 1.7 13.3 2.3 5.5 7.20 ± 0.30 80 9.9
2 x 2.5 50 0.26 2.2 8.0 2.75 6.3 8.40 ± 0.30 30 12.0
3 x 2.5 50 0.26 2.2 8.0 2.75 6.8 8.40 ± 0.30 50 14.2
4 x 2.5 50 0.26 2.2 8.0 2.75 7.6 9.20 ± 0.30 30 18.1
2 x 4 56 0.31 2.8 5.0 3.55 7.8 10.20 ± 0.30 30 18.2
3 x 4 56 0.31 2.8 5.0 3.55 8.4 10.10 ± 0.40 30 21.9
4 x 4 56 0.31 2.8 5.0 3.55 9.3 11.30 ± 0.40 50 26.5
2 x 6 84 0.31 3.4 3.4 4.15 9.0 11.00 ± 0.40 50 22.5
3 x 6 84 0.31 3.4 3.4 4.15 10.0 12.40 ± 0.40 70 32.7
4 x 6 84 0.31 3.4 3.4 4.15 11.0 12.90 ± 0.40 60 38.8
3 x 10 78 0.41 4.3 1.82 5.75 13.5 15.80 ± 0.50 30 49.6
3 x 16 126 0.41 5.5 1.16 16.90 16.2 18.50 ± 0.50 40 79.3
27HUBER+SUHNER
Sensor cables for road vehicles: Resistant to low and high temperatures, flame retardant, flexible and media resistant, customer specific designs.
Pressure, knock and temperature sensors are standard today, and sensors for seatbelt tight eners, automatic transmissions, diesel pumps, ABS/EPS systems, speed monitoring plus other applications are an increasing demand. It must be ensured that critical electrical circuits will perform faultlessly under the most adverse conditions.
Electrical systems for fan motors, water pumps, power steering, brakes and accelerators are in-creasingly replacing V-belts, various hydraulic motors and mechanical actuators. Sensor cables serve for controlling the electronics and supplying power to the electric motors.
General features
• Temperature range –55°C to +150°C• Resistant to motor oils, fuels, hydrolysis• Electron beam crosslinked RADOX insulation does not melt or flow at high temperatures• Usable in automated processing• Resistant to potting or overmoulding• Compact and flexible
RADOX® Sensor Cables
RADOX® sensor cables 30
29HUBER+SUHNER
12 12 124 34 4
RADOX® Sensor Cables
Number of conductors 1 – 50Cross section 0.14 – 6 mm2
Voltage rating 60 to 600 V DCTemperature range (–55 °C) –40 °C to +150 °C (3000 h)
Composition of cable
1. Conductor stranded tinned or bare copper2. Insulation various RADOX®, fluoropolymers3. EMC screen copper braiding or aluminium tape 4. Jacket various RADOX®, TPU or fluoropolymers
Characteristics and specialities
• High and low temperature resistance• Ozone and weathering resistance• Resistant to pressure at high temperature• Resistant to motor oils, fuels and hydrolysis• Flame retardant• High abrasion resistance• Easy to strip and process
Application
Sensor cables for use in road vehicle applications.
Standards
Conductor General
DIN 72551 part 6 ISO 6722 class C and D
ISO 6722 ISO 14572
DIN EN 13602, Cu-ETP1-A (CW003A) ADR TÜV approval
For further technical details please refer to our data sheet.
30 HUBER+SUHNER
single-coloured or two-coloured
RADOX® Sensor Cables
Customized cables to your requirements
Our leads
• Round or flat cable? • EMC shielding necessary?• What degree of flexibility is required?• Special temperature requirements?• Special requirements for voltage rating,
impedance, attenuation?
• Special chemical or environmental concerns?
• Potting or overmoulding?• Special requirements on processing
(crimping, welding, ultrasonic welding, etc.)?• Approvals?
Our jacket materials
Lead TypeTemperature range Cross section
Designation3000 h mm2
RADOX® 155S RW –55 °C to +150 °C 0.14 to 1Following "Ultra Thin Wall" according to ISO 6722, excellent media resistance, for applications where a small diameter is required.
RADOX® 155S FLR –55 °C to +150 °C 0.35 to 6"Thin Wall" according to ISO 6722, excellent media resistance, for standard applications.
PE-X –40 °C to +125 °C 0.35 to 1 Databuscablewith110/120Ωimpedance.
ETFE FLR –55 °C to +200 °C 0.35 to 6"Thin Wall" according to ISO 6722, excellent media resistance, such as hot oil.
Jacket materialTemperature range Electron beam
crosslinkedMechanical resistance
Flexibility Media resistance3000 h
RADOX® Elastomer S –70 °C to +150 °C Yes Very Good Excellent Excellent
RADOX® 155 –55 °C to +150 °C Yes Good Good Good
TPU –40 °C to +125 °C No Very Good Excellent Good
31HUBER+SUHNER
RADOX® Databus Cables
Optimum protection of sensitive data with RADOX
The continuous growth in the application of electronic sys tems in road vehicles requires reliable databus cables for transmitting information at high fre quen cies. CAN, LIN, MOST, FlexRay and other appli cations have become part of the modern on-board network structures inside vehicles.
HUBER+SUHNER combines its know-how in data com mu nications with electron beam crosslinked materials technology to offer cables meeting specifications such as SAE J1939-11, -15 or ISO 11898-2 (CAN).
Using their electron beam crosslinked RADOX in su lation, the cables offer high thermal pressure re sistance, resistance to fluids and good abrasion resis tance, and they can be applied across a wide tem perature range.
General features
• Excellent dielectric performance• Flame retardant insulation, neither melting nor flowing when exposed to high temperatures• Operating temperature –55°C to +150°C• Outstanding data transmission performance• Optimal protection using RADOX insulation• Application is possible in engine compartments
RADOX® databus cables 34
33HUBER+SUHNER
12 125 345
RADOX® Databus Cables
Number of conductors 2 – 4Cross section 0.35 – 0.75 mm2
Voltage rating 60 V DCTemperature range (–55 °C) –40 °C to +125 °C / +150 °C (3000 h)Min. bending radius 4 x cable dia.
Composition of cable
1. Conductor stranded tinned or bare copper2. Insulation various RADOX® insulation materials or PE-X3. Sheath various RADOX® jacket materials4. Screen plastic laminated aluminium tape and drain wire5. Sheath various RADOX® jacket materials or TPU
Characteristics and specialities
• Excellent dielectric performance• Outstanding data transmission performance• Possible application in engine compartments• High and low temperature resistance• Flame retardant
Application
Databus cable for transmitting information at high frequencies in road vehicles.
Standards
Conductor General
DIN 72551 part 6 ISO 6722 class C and D
ISO 6722 ISO 14572
DIN EN 13602, Cu-ETP1-A (CW003A) SAE J1939-11 /-15
For further technical details please refer to our data sheet.
34 HUBER+SUHNER
RADOX® Databus Cables
Extract from our delivery programme
Cable types
Jacket materials
Cross section Conductor Core ScreenOutside diameter
mm2construction*
n x mmdiameter. max. mm
resistance @ 20 °C
max.Ω/km
wall thickness min. mm
diameter mm
aluminium tape
mm
2 x 0.35 7 x 0.26 0.77 52.0 0.66 2.1 No 5.6
2 x 0.50 19 x 0.18 0.89 37.1 0.80 2.5 No 6.2
2 x 0.75 19 x 0.22 1.10 24.7 0.95 3.0 No 7.2
2 x 0.35 7 x 0.26 0.77 52.0 0.66 2.1 Yes 8.0
2 x 0.50 19 x 0.18 0.89 37.1 0.80 2.5 Yes 8.3
2 x 0.75 19 x 0.22 1.10 24.7 0.95 3.0 Yes 10.7
Jacket material Temperature range Electron beam
crosslinkedFlexibility Media resistance
3000 h
RADOX® Elastomer S –70°C to +150°C yes excellent excellent
RADOX® 155 –55°C to +150°C yes good good
TPU –40°C to +125°C no excellent good
* typical value x max. single wire diameter
35HUBER+SUHNER
Automotive Cable Systems
High resistance of cables against fluids and high temperatures are increasingly required for appli-cations in the field of Automotive. HUBER+SUHNER offers complete cable system solutions for Automotive, customized to your requirements. HUBER+SUHNER is your professional partner for the development and manufacture of harnesses and sophisticated cable systems, as well as for the according processing.
Our engineers support you from A to Z, already in the design phase of your project by developing your complex cable system solutions from scratch, and then in the manufacturing of small series as well as high volume production.
We are able to offer our customers turnkey system solutions from one source, as well as operational flexibility, due to various productions sites in different parts of the world.
General features
• Development of cable systems• Injection moulding for cables• Injection moulding for connectors• Barrier sealed and waterproof system solutions
High voltage distribution units 38
Adapter plate 40
High voltage connectivity system RACS 42
Cable system solutions 45
37HUBER+SUHNER
High Voltage Distribution Units
Applications
HUBER+SUHNER is offering High Voltage Distribution Units for electric vehicles. The HVDU assures the power distribution between battery, generator, loader task and secondary output.
Benefits
• Design, development and manufacturing of the HVDU incl. wiring system• EMC protected• Assembly according to customer requirements, e.g. capacitors, fuses, insulation monitors, inertiaswitch,
active discarging unit and current-braker• Protected by an interlock system• Materials and components with low electrical resistance• Protection mode IP 69 K• Validated by several customer requirements as DIN 40050-9, IEC 60068-2-6, IEC 60068-2-11,
IEC 60068-2-38, IEC 60068-2-60, IEC 60068-2-64, IEC 60068-2-70, JIS D 0207
38 HUBER+SUHNER
High Voltage Distribution Units
Mechanical specifications
Overall dimensions of the box according to customer requirements
Material of the box aluminium alloy milled or die casted
Cable size for HV connections RADOX® from 2.5 mm² to 120 mm²
Material of the current bars copper alloy, tinned
Environmental specifications
Temperature range –40 °C to +125 °C (3000 h) / 140 °C short term
Protection mode IP 69 K
Electrial specifications
Voltage rating up to 1000 V AC
Rated current up to 500 A
Test voltage 2700 V / 60 sec.
Technical data
Examples high voltage distribution units
39HUBER+SUHNER
Adapter Plate
Applications
HUBER+SUHNER is offering adapter plates for hybrid vehicles in combination with power electronics. The plate assures the power distribution between the power electronic and battery and generator assuring minimum needed space.
Benefits
• Screened HV connection• Dimensions, interfaces and connections according to customer requirements, assembly
including e.g. fuses if needed• Minimum needed space• Low electrical resistance• High ampacity• Protected by an interlock system• Materials and components with low electrical resistance. • Protection mode IP 69 K
40 HUBER+SUHNER
Adapter Plate
Mechanical specifications
Overall dimensions of the plate according to customer requirements
Material of the plate aluminium alloy milled or die casted
Cable size for HV connections RADOX® from 2.5 mm² to 120 mm²
Material of the current bars copper alloy, silver plated
Environmental specifications
Temperature range –40 °C to +125 °C (3000 h) / 140 °C short term
Protection mode IP 69 K
Electrial specifications
Voltage Rating up to 1000 V AC
Rated current up to 500 A
Test voltage 2700 V / 60 sec.
Technical data
41HUBER+SUHNER
High Voltage Connectivity System RACS
Applications
HUBER+SUHNER is offering the screened high voltage connectivity system (RACS – RADOX® Automotive Connection System) which is used in combination with the H+S HVDU.
Benefits
• Screened HV connection• Lowelectricalresistance<10mΩofthescreeningfromconnectortotheHVDU• High ampacity• Minimum needed space• Protection mode IP 69 K• Validated mounted in the H+S HVDU
42 HUBER+SUHNER
High Voltage Connectivity System RACS
Mechanical specifications
Dimensions adapter plate valid for 2.5 mm² to 120 mm²
Material of the crimp ferrules copper alloy, tinned
Environmental specifications
Temperature range –40 °C to +125 °C (3000 h) / 140 °C short term
Protection mode IP 69 K when mounted in the H+S HVDU
Electrial specifications
Voltage Rating up to 1000 V AC
Rated current up to 500 Ampere
Test voltage 2700 V / 60 sec.
Connector resistance <10mΩ
Technical data
43HUBER+SUHNER
Cable Size for HV Connections
Description Cable type
RACS 2.5-1 POLE 1 x 2.5
RACS 4-1 POLE 1 x 4
RACS 6-1 POLE 1 x 6
RACS 2 x 4-1 POLE 2 x 4
RACS 25-1 POLE 1 x 25
RACS 35-1 POLE 1 x 35
RACS 50-1 POLE 1 x 50
RACS 70-1 POLE 1 x 70
RACS 95-1 POLE 1 x 95
RACS 120-1 POLE 1 x 120
RACS 25-2 POLE 2 x 1 x 25
RACS 35-2 POLE 2 x 1 x 35
RACS 50-2 POLE 2 x 1 x 50
RACS 70-2 POLE 2 x 1 x 70
RACS 95-2 POLE 2 x 1 x 95
RACS 25-3 POLE 3 x 1 x 25
RACS 35-3 POLE 3 x 1 x 35
RACS 50-3 POLE 3 x 1 x 50
RACS 70-3 POLE 3 x 1 x 70
RACS 95-3 POLE 3 x 1 x 95
Further dimensions on request.
Examples RACS
High Voltage Connectivity System RACS
44 HUBER+SUHNER
Cable System Solutions
Applications
HUBER+SUHER develops complex cable systems according to customer requirements.
Benefits
• Assembly of harnesses with our cables for specific applications – according to customer requirements• Injection moulding for cables and connectors• Waterproof system solutions• Longitudinal water tightness• Modules with integrated circuit boards, resistors, etc.
45HUBER+SUHNER
Additional Information
Technical and delivery information
In this chapter you find the following, additional and useful information about Automotive Wire+Cable:
• RADOX® details and advantages• Temperature classes• Current carrying capacity• Delivery spools
RADOX details and advantages 48
Temperature classes 49
Current carrying capacity 50
Delivery spools 60
47HUBER+SUHNER
RADOX® Details and Advantages
What is RADOX?
RADOX are electron beam crosslinked in sulating materials developed by HUBER+SUHNER. The RADOX insulations offer excellent resistance to thermal, chemical, electrical and mechanical loads. Thanks to reduced wall thicknesses, it also saves weight and space. RADOX materials enable solutions to be custo mized to specific applications.
RADOX does not melt!
Thermoplastic insulation materials are sometimes used for automotive wiring. Products such as PVC, PP, PE, PA, TPE and Fluorpolymers are used. These materials all have a melting point and at certain temperature peaks in specific applications they eventually melt with the risk of creating a short circuit. RADOX does not melt and therefore provides an extra safety margin for automotive applications.
RADOX withstands temperature peaks!
Since RADOX® is not melting, it will withstand temperature peaks above the defined temperature range. A typical Automotive RADOX® cable is specified for applications between -40 and +150°C based on a lifetime of 3000 h. Higher temperature peaks are possible, RADOX® does not melt. There is a rule of thumb that states, +10 °C temperature increase reduces lifetime by half (160 °C / 1500 h, 170 °C / 750 h, etc.), the converse also applies.
RADOX extends lifetime at lower temperature!
In general automotive cables are defined with different temperature ratings based on 3000 h. This makes sense in most of the cases since 3000 h corresponds to 150’000 km lifetime for a car (at 50 km/h average speed). If any application asks for a longer lifetime, especially with trucks and buses, RADOX® is the choice. By using a 150 °C rated RADOX cable at 120 °C, this will extend lifetime to 24000 h or 1 200 000 km.
RADOX withstands low temperatures!
Automotive specifications define clear temperature ranges. These ranges often start at –40 °C and go up to 85, 100, 125, 150, 175 °C, etc. The range is described as class B, C, D or T2, T3 and T4 and so on. RADOX can do better than that! REMS will withstand –70 °C, RADOX® 155S and 155 at least –55 °C. This creates other possibilities where for example a standard PVC will not do the job.
48 HUBER+SUHNER
Temperature Classes
Class Rating Temperature Materials
H –40 °C to +250 °C Fluoropolymers
G –40 °C to +225 °C Fluoropolymers
F (6) –40 °C to +200 °C Fluoropolymers, Silicone
E (5) –40 °C to +175 °C Fluoropolymers, Silicone
D (4) –40 °C to +150 °C Fluoropolymers, Polyesters, RADOX®
C (3) –40 °C to +125 °C PE-X, TPE, PVC-X, RADOX®
B (2) –40 °C to +100 °C PE-X, TPE, PVC
A (1) –40 °C to +85 °C PVC
Temperature classes for cables
Automotive specifications define clear temperature ranges. These ranges often start at –40 °C and go up to 85 °C, 100 °C, 125 °C, 150 °C, 175 °C, etc. The range is described as class A, B, C, D, E, F, G and H or T1, T2, T3, T4, T5 and T6. These temperature classes are defined according to ISO 6722, the ratings are valid for 3000 hours.
49HUBER+SUHNER
180 °C 375 h
170 °C 750 h
160 °C 1500 h
150 °C 3000 h
140 °C 6000 h
130 °C 12000 h
120 °C 24000 h
Standard conditions for current rating
The tabled values for the current rating were calculated according to IEC 60287 for the following standard condi-tions:
• Continuous operation • Single circuit for 3-phase current, single conductor for 1-phase current • 30 °C ambient temperature and sufficiently large and ventilated spaces, whose ambient temperature is
not appreciably increased by the heat coming from the cables • 150 °C conductor temperature • ISO 6722: 3000 h / 150 °C winding test
Frequency from 0 Hz (DC) up to 200 Hz (AC)
Installation in air, unrestricted heat dissipation, means that the following installation conditions are observed: • Distanceofthecablesfromthewall,fromthefloor,fromtheceiling≥cablediameter • Distancebetweentwoadjacentpowercircuits≥2xcablediameter • Vertical distance between power circuits laid one upon another for individual cables ≥2xcablediameter for layers of cables > 200 mm • Perforated tray with a perforation > 30 % of the total surface
Open trays are continuous supports with vertical sides, but without cover. A possible perforation accounts for ≤30%ofthetotalsurface.
Closed ducts are entirely closed. Pipes belong to this category also. The max. filling degree is 70 %.
Life time expectation
If crosslinked wires are used at higher temperatures than indicated by the temperature rating in ISO 6722, the life time is reduced accordingly. Analogical, the life time will increase at lower temperature. RADOX® 155 for example has a life span of 3'000 h at a conductor temperature of +150 °C. If it is used at another temperature, life time expectations are as follows:
Example on basis RADOX® 155, REMS and RADOX® 155 SFLR
Current carrying Capacity
RADOX® 155 and REMS battery cables and RADOX® 155 SFLR single core cables
50 HUBER+SUHNER
Reduction factors for increased ambient temperature (f1)
Ambient temp. [°C] 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115
Reduction factor f1
1 0.97 0.95 0.93 0.91 0.89 0.86 0.84 0.81 0.79 0.76 0.73 0.70 0.67 0.64 0.61 0.57 0.54
Reduction factors for different permissible conductor temperature (f2)
Conductor temp. (°C) 180 170 160 150 140 130 120 110 100 90 80 70 60 50 40
Reduction factor f2
1.09 1.07 1.04 1 0.96 0.91 0.85 0.79 0.72 0.67 0.56 0.47 0.37 0.27 0.16
Reduction factors for increased frequency (f4)
Frequency [Hz]* 400 600 800 1000 2000 3000 4000 5000 10000
Copper conductor cross section mm2
faktor f4
1.5 1 1 1 1 1 1 1 1 1
2.5 1 1 1 1 1 1 1 1 1
4 1 1 1 1 1 1 1 1 0.98
6 1 1 1 1 1 1 1 0.99 0.93
10 1 1 1 1 1 1 0.96 0.93 0.82
16 1 1 1 1 1 0.95 0.91 0.87 0.76
25 1 1 1 1 0.94 0.88 0.83 0.80 0.69
35 1 1 1 0.98 0.89 0.82 0.77 0.74 0.64
50 1 1 0.97 0.94 0.83 0.76 0.72 0.69 0.59
70 1 0.95 0.91 0.88 0.77 0.71 0.67 0.63 0.54
95 0.98 0.93 0.88 0.84 0.73 0.67 0.63 0.60 0.51
120 0.94 0.88 0.84 0.80 0.69 0.64 0.60 0.57 0.48
150 0.90 0.85 0.80 0.77 0.66 0.61 0.57 0.54 0.46
* We recommend that you use a special conductor design for frequencies > 800 Hz and cross sections > 25 mm2 (waveguide design).
Current carrying Capacity
RADOX® 155 and REMS battery cables and RADOX® 155 SFLR single core cables
Current rating under service conditions
I = IN•f
1•f
2•f
3 •f
4
I [A] current rating for continuous operation under service conditionsI
N[A] current rating for continuous operation under standard conditions
f1 reduction factor for increased ambient temperature
f2 conversion factor for deviated conductor temperature
f3 reduction factor for multicore cables
f4 Reduction factor for increased frequency
51HUBER+SUHNER
Installation method Connecting lead in free air or perforated tray
Number of simultaneous loaded conductors on each tray 1 2 3 4 6 8 10 16 20 4 6 8 10 16 20 4 6 8 10 16 20 4 6 8 10 16 20
Reduction factor f3
1 0.87 0.81 0.78 0.75 0.74 0.73 0.72 0.71 0.71 0.62 0.57 0.53 0.47 0.45 0.67 0.59 0.54 0.50 0.45 0.43 0.71 0.58 0.52 0.48 0.41 0.38
Copper conductor cross section mm2
Current carrying capacity in [A]
4 88 76 71 68 66 65 64 63 62 62 54 50 47 41 39 59 52 47 44 39 38 62 51 46 42 36 33
6 113 98 92 88 85 84 83 81 80 80 70 65 60 53 51 76 67 61 57 51 49 80 66 59 54 46 43
10 165 144 134 129 124 122 121 119 117 117 102 94 88 78 74 111 97 89 83 74 71 117 96 86 79 68 63
16 222 193 180 173 166 164 162 160 157 157 137 126 118 104 100 149 131 120 111 100 95 157 129 115 106 91 84
25 294 256 239 230 221 218 215 212 209 209 183 168 156 138 133 197 174 159 147 133 127 209 171 153 141 121 112
35 370 321 299 288 277 273 270 266 262 262 229 211 196 174 166 248 218 200 185 166 159 262 214 192 177 151 140
50 471 410 382 367 353 349 344 339 334 334 292 269 250 221 212 316 278 254 236 212 203 334 273 245 226 193 179
70 592 515 480 462 444 438 432 427 421 421 367 338 214 278 267 397 349 320 296 267 255 421 344 308 284 243 225
95 719 626 583 561 540 532 525 518 511 511 446 410 381 338 324 482 424 388 360 324 309 511 417 374 345 295 273
120 840 731 680 655 630 622 613 605 596 596 521 479 445 395 378 563 496 454 420 378 361 596 487 437 403 344 319
150 974 848 789 760 731 721 711 702 692 692 604 555 516 458 438 653 575 526 487 438 419 692 565 507 468 399 370
Current carrying Capacity
RADOX® 155 and REMS battery cables
52 HUBER+SUHNER
Installation method Connecting lead in free air or perforated tray
Number of simultaneous loaded conductors on each tray 1 2 3 4 6 8 10 16 20 4 6 8 10 16 20 4 6 8 10 16 20 4 6 8 10 16 20
Reduction factor f3
1 0.87 0.81 0.78 0.75 0.74 0.73 0.72 0.71 0.71 0.62 0.57 0.53 0.47 0.45 0.67 0.59 0.54 0.50 0.45 0.43 0.71 0.58 0.52 0.48 0.41 0.38
Copper conductor cross section mm2
Current carrying capacity in [A]
4 88 76 71 68 66 65 64 63 62 62 54 50 47 41 39 59 52 47 44 39 38 62 51 46 42 36 33
6 113 98 92 88 85 84 83 81 80 80 70 65 60 53 51 76 67 61 57 51 49 80 66 59 54 46 43
10 165 144 134 129 124 122 121 119 117 117 102 94 88 78 74 111 97 89 83 74 71 117 96 86 79 68 63
16 222 193 180 173 166 164 162 160 157 157 137 126 118 104 100 149 131 120 111 100 95 157 129 115 106 91 84
25 294 256 239 230 221 218 215 212 209 209 183 168 156 138 133 197 174 159 147 133 127 209 171 153 141 121 112
35 370 321 299 288 277 273 270 266 262 262 229 211 196 174 166 248 218 200 185 166 159 262 214 192 177 151 140
50 471 410 382 367 353 349 344 339 334 334 292 269 250 221 212 316 278 254 236 212 203 334 273 245 226 193 179
70 592 515 480 462 444 438 432 427 421 421 367 338 214 278 267 397 349 320 296 267 255 421 344 308 284 243 225
95 719 626 583 561 540 532 525 518 511 511 446 410 381 338 324 482 424 388 360 324 309 511 417 374 345 295 273
120 840 731 680 655 630 622 613 605 596 596 521 479 445 395 378 563 496 454 420 378 361 596 487 437 403 344 319
150 974 848 789 760 731 721 711 702 692 692 604 555 516 458 438 653 575 526 487 438 419 692 565 507 468 399 370
Continuous current rating
conductor temperature +150 °C, ambient temperature +30 °C
Current carrying Capacity
RADOX® 155 and REMS battery cables
53HUBER+SUHNER
Installation method on floor or wall fixed on a ceiling or under floor in conduit, in a void or in a pipe
Number of simultaneous loaded conductors on each tray 1 2 3 4 1 2 3 4 5 6 7 8 ≥9 1 2 3 4 5 6 7 8 9 10 12 14 16 20
Reduction factor f3
1 0.85 0.79 0.75 0.95 0.81 0.72 0.68 0.66 0.64 0.63 0.62 0.61 1 0.80 0.70 0.65 0.60 0.57 0.54 0.52 0.50 0.48 0.45 0.43 0.41 0.38
Copper conductor cross section mm2
Current carrying capacity in [A]
4 79 67 62 59 75 64 57 53 52 50 49 49 48 62 63 55 51 47 45 42 41 39 38 35 34 32 30
6 100 85 79 75 95 81 72 68 66 64 63 62 61 81 65 57 53 48 46 44 42 40 39 36 35 33 31
10 148 126 117 111 140 120 106 101 98 95 93 92 90 110 88 77 71 66 63 59 57 55 53 49 47 45 42
16 200 170 158 150 190 162 144 136 132 128 126 124 122 151 121 106 98 91 86 82 79 76 73 68 65 62 57
25 267 227 211 200 253 216 192 181 176 171 168 165 163 202 162 141 131 121 115 109 105 101 97 91 87 83 77
35 337 287 266 253 320 273 243 229 223 216 212 209 206 251 200 175 163 150 143 135 130 125 120 113 108 103 95
50 431 366 340 323 409 349 310 293 284 276 271 267 263 315 252 221 205 189 180 170 164 158 151 142 136 129 120
70 544 462 430 408 517 441 392 370 359 348 343 337 332 395 316 276 257 237 225 213 205 197 190 178 170 162 150
95 662 562 523 496 629 536 476 450 437 423 417 410 404 490 392 343 318 294 279 264 255 245 235 220 211 201 186
120 775 659 612 581 736 628 558 527 511 496 488 480 473 566 453 396 368 339 323 306 294 283 272 255 243 232 215
150 901 766 712 676 856 730 649 613 595 577 568 559 550 654 523 458 425 393 373 353 340 327 315 294 281 268 249
Current carrying Capacity
RADOX® 155 and REMS battery cables
or
54 HUBER+SUHNER
Installation method on floor or wall fixed on a ceiling or under floor in conduit, in a void or in a pipe
Number of simultaneous loaded conductors on each tray 1 2 3 4 1 2 3 4 5 6 7 8 ≥9 1 2 3 4 5 6 7 8 9 10 12 14 16 20
Reduction factor f3
1 0.85 0.79 0.75 0.95 0.81 0.72 0.68 0.66 0.64 0.63 0.62 0.61 1 0.80 0.70 0.65 0.60 0.57 0.54 0.52 0.50 0.48 0.45 0.43 0.41 0.38
Copper conductor cross section mm2
Current carrying capacity in [A]
4 79 67 62 59 75 64 57 53 52 50 49 49 48 62 63 55 51 47 45 42 41 39 38 35 34 32 30
6 100 85 79 75 95 81 72 68 66 64 63 62 61 81 65 57 53 48 46 44 42 40 39 36 35 33 31
10 148 126 117 111 140 120 106 101 98 95 93 92 90 110 88 77 71 66 63 59 57 55 53 49 47 45 42
16 200 170 158 150 190 162 144 136 132 128 126 124 122 151 121 106 98 91 86 82 79 76 73 68 65 62 57
25 267 227 211 200 253 216 192 181 176 171 168 165 163 202 162 141 131 121 115 109 105 101 97 91 87 83 77
35 337 287 266 253 320 273 243 229 223 216 212 209 206 251 200 175 163 150 143 135 130 125 120 113 108 103 95
50 431 366 340 323 409 349 310 293 284 276 271 267 263 315 252 221 205 189 180 170 164 158 151 142 136 129 120
70 544 462 430 408 517 441 392 370 359 348 343 337 332 395 316 276 257 237 225 213 205 197 190 178 170 162 150
95 662 562 523 496 629 536 476 450 437 423 417 410 404 490 392 343 318 294 279 264 255 245 235 220 211 201 186
120 775 659 612 581 736 628 558 527 511 496 488 480 473 566 453 396 368 339 323 306 294 283 272 255 243 232 215
150 901 766 712 676 856 730 649 613 595 577 568 559 550 654 523 458 425 393 373 353 340 327 315 294 281 268 249
Continuous current rating
conductor temperature +150 °C, ambient temperature +30 °C
Current carrying Capacity
RADOX® 155 and REMS battery cables
55HUBER+SUHNER
Installation method Connecting lead in free air or perforated tray
Number of simultaneous loaded conductors on each tray 1 2 3 4 6 8 10 16 20 4 6 8 10 16 20 4 6 8 10 16 20 4 6 8 10 16 20
Reduction factor f3
1 0.87 0.81 0.78 0.75 0.74 0.73 0.72 0.71 0.71 0.62 0.57 0.53 0.47 0.45 0.67 0.59 0.54 0.50 0.45 0.43 0.71 0.58 0.52 0.48 0.41 0.38
Copper conductor cross section mm2
Current carrying capacity in [A]
0.35 18 16.0 14.9 14.4 13.8 13.6 13.4 13.3 13.1 13.1 11.4 10.5 9.7 8.6 8.3 12.3 10.9 9.9 9.2 8.3 7.9 13.1 10.7 9.6 8.8 7.5 7.0
0.50 24 21.0 19.6 18.9 18.1 17.9 17.7 17.4 17.2 17.2 15.0 13.8 12.8 11.3 10.9 16.2 14.3 13.0 12.1 10.9 10.4 17.2 14.0 12.6 11.6 9.9 9.2
0.75 31 27 25 24 23 23 23 22 22 22 19 18 17 15 14 21 18 17 16 14 13 22 18 16 15 13 12
1 37 32 30 29 28 27 27 27 26 26 23 21 20 17 17 25 22 20 18 17 16 26 21 19 18 15 14
1.5 47 41 38 37 36 35 35 34 34 34 29 27 25 22 21 32 28 26 24 21 20 34 27 25 23 19 18
2.5 65 56 52 50 48 48 47 47 46 46 40 37 34 30 29 43 38 35 32 29 28 46 38 34 31 27 25
4 88 76 71 68 66 65 64 63 62 62 54 50 47 41 39 59 52 47 44 39 38 62 51 46 42 36 33
6 113 98 92 88 85 84 83 81 80 80 70 65 60 53 51 76 67 61 57 51 49 80 66 59 54 46 43
Current carrying Capacity
RADOX® 155S FLR single core cables
56 HUBER+SUHNER
Installation method Connecting lead in free air or perforated tray
Number of simultaneous loaded conductors on each tray 1 2 3 4 6 8 10 16 20 4 6 8 10 16 20 4 6 8 10 16 20 4 6 8 10 16 20
Reduction factor f3
1 0.87 0.81 0.78 0.75 0.74 0.73 0.72 0.71 0.71 0.62 0.57 0.53 0.47 0.45 0.67 0.59 0.54 0.50 0.45 0.43 0.71 0.58 0.52 0.48 0.41 0.38
Copper conductor cross section mm2
Current carrying capacity in [A]
0.35 18 16.0 14.9 14.4 13.8 13.6 13.4 13.3 13.1 13.1 11.4 10.5 9.7 8.6 8.3 12.3 10.9 9.9 9.2 8.3 7.9 13.1 10.7 9.6 8.8 7.5 7.0
0.50 24 21.0 19.6 18.9 18.1 17.9 17.7 17.4 17.2 17.2 15.0 13.8 12.8 11.3 10.9 16.2 14.3 13.0 12.1 10.9 10.4 17.2 14.0 12.6 11.6 9.9 9.2
0.75 31 27 25 24 23 23 23 22 22 22 19 18 17 15 14 21 18 17 16 14 13 22 18 16 15 13 12
1 37 32 30 29 28 27 27 27 26 26 23 21 20 17 17 25 22 20 18 17 16 26 21 19 18 15 14
1.5 47 41 38 37 36 35 35 34 34 34 29 27 25 22 21 32 28 26 24 21 20 34 27 25 23 19 18
2.5 65 56 52 50 48 48 47 47 46 46 40 37 34 30 29 43 38 35 32 29 28 46 38 34 31 27 25
4 88 76 71 68 66 65 64 63 62 62 54 50 47 41 39 59 52 47 44 39 38 62 51 46 42 36 33
6 113 98 92 88 85 84 83 81 80 80 70 65 60 53 51 76 67 61 57 51 49 80 66 59 54 46 43
Continuous current rating
conductor temperature +150 °C, ambient temperature +30 °C
Current carrying Capacity
RADOX® 155S FLR single core cables
57HUBER+SUHNER
Installation method on floor or wall fixed on a ceiling or under floor in conduit, in a void or in a pipe
Number of simultaneous loaded conductors on each tray 1 2 3 4 1 2 3 4 5 6 7 8 ≥9 1 2 3 4 5 6 7 8 9 10 12 14 16 20
Reduction factor f3
1 0.85 0.79 0.75 0.95 0.81 0.72 0.68 0.66 0.64 0.63 0.62 0.61 1 0.80 0.70 0.65 0.60 0.57 0.54 0.52 0.50 0.48 0.45 0.43 0.41 0.38
Copper conductor cross section mm2
Current carrying capacity in [A]
0.35 15 12.7 11.8 11.2 14.2 12.1 10.8 10.2 9.9 9.6 9.4 9.3 9.1 12.0 12.0 10.5 9.7 9.0 8.5 8.1 7.8 7.5 7.2 6.7 6.4 6.1 5.7
0.50 20 16.6 15.5 14.7 18.6 15.9 14.1 13.3 12.9 12.5 12.3 12.1 11.9 17.0 13.8 12.1 11.2 10.3 9.8 9.3 9.0 8.6 8.3 7.7 7.4 7.1 6.5
0.75 27 23 21 20 25 22 19 18 18 17 17 16 16 23 18 16 15 14 13 12 12 12 11 10 10 9 9
1 31 27 25 23 30 25 22 21 21 20 20 19 19 28 22 19 18 17 16 15 14 14 13 12 12 11 11
1.5 39 33 31 29 37 32 28 27 26 25 25 24 24 35 28 24 23 21 20 19 18 17 17 16 15 14 13
2.5 55 47 44 42 53 45 40 38 37 35 35 34 34 45 36 32 29 27 26 24 23 23 22 20 19 18 17
4 76 65 60 57 72 62 55 52 50 49 48 47 46 65 52 45 42 39 37 35 34 32 31 29 28 27 25
6 100 85 79 75 95 81 72 68 66 64 63 62 61 81 65 57 53 48 46 44 42 40 39 36 35 33 31
or
Current carrying Capacity
RADOX® 155S FLR single core cables
58 HUBER+SUHNER
Continuous current rating
conductor temperature +150 °C, ambient temperature +30°C
Installation method on floor or wall fixed on a ceiling or under floor in conduit, in a void or in a pipe
Number of simultaneous loaded conductors on each tray 1 2 3 4 1 2 3 4 5 6 7 8 ≥9 1 2 3 4 5 6 7 8 9 10 12 14 16 20
Reduction factor f3
1 0.85 0.79 0.75 0.95 0.81 0.72 0.68 0.66 0.64 0.63 0.62 0.61 1 0.80 0.70 0.65 0.60 0.57 0.54 0.52 0.50 0.48 0.45 0.43 0.41 0.38
Copper conductor cross section mm2
Current carrying capacity in [A]
0.35 15 12.7 11.8 11.2 14.2 12.1 10.8 10.2 9.9 9.6 9.4 9.3 9.1 12.0 12.0 10.5 9.7 9.0 8.5 8.1 7.8 7.5 7.2 6.7 6.4 6.1 5.7
0.50 20 16.6 15.5 14.7 18.6 15.9 14.1 13.3 12.9 12.5 12.3 12.1 11.9 17.0 13.8 12.1 11.2 10.3 9.8 9.3 9.0 8.6 8.3 7.7 7.4 7.1 6.5
0.75 27 23 21 20 25 22 19 18 18 17 17 16 16 23 18 16 15 14 13 12 12 12 11 10 10 9 9
1 31 27 25 23 30 25 22 21 21 20 20 19 19 28 22 19 18 17 16 15 14 14 13 12 12 11 11
1.5 39 33 31 29 37 32 28 27 26 25 25 24 24 35 28 24 23 21 20 19 18 17 17 16 15 14 13
2.5 55 47 44 42 53 45 40 38 37 35 35 34 34 45 36 32 29 27 26 24 23 23 22 20 19 18 17
4 76 65 60 57 72 62 55 52 50 49 48 47 46 65 52 45 42 39 37 35 34 32 31 29 28 27 25
6 100 85 79 75 95 81 72 68 66 64 63 62 61 81 65 57 53 48 46 44 42 40 39 36 35 33 31
Current carrying Capacity
RADOX® 155S FLR single core cables
59HUBER+SUHNER
l 1l 2
d 1
d 2
d 3
Plastic reel
Nr. 7
Plastic reel
DIN 250
Plastic reel
L355
Plywood reel
L450/13
Plywood reel
L450/14
Plywood reel
L500
d 1 170 250 355 450 450 500d 2 65 160 180 200 312 250d 3 60 22 36 50 50 50l 1 135 200 167 244 244 321l 2 130 160 142 228 228 305Tara kg 0.15 0.71 1.04 2.48 3.02 3.16
Cable Ø mm Cable length per delivery reel (m)
1 2000 3710 81002 500 930 2030 58204 130 230 510 1450 940 22406 100 220 650 420 10008 130 360 230 56010 230 150 36012 160 100 25014 120 80 18016 14018 110202224
Legend
d1 = Flange diameter (mm) d2 = Core diameter (mm) d3 = Borehole diameter (mm)
l1 = Outside width (mm)l2 = Winding width (mm)
Delivery Spools
60 HUBER+SUHNER
l 1l 2
d 1
d 2
d 3
Plywood reel
LHL710
Wooden reel
LHL900
Wooden reel
LHL1050
Reusable NPS coil
250x400 (CK2)
Reusable NPS coil
400x400 (CK4)
d 1 710 900 1050 400 400d 2 360 450 550 208 – 260 176 – 260d 3 82 82 82 80 80l 1 430 545 698 313 463l 2 400 450 600 250 400Tara kg 10 36 53 2.4 2.7
Cable Ø mm Cable length per delivery reel (m)
1
For details about length, instruction manual and accessories ask for separate documentation.
24 58006 2610 4770 83808 1470 2680 471010 940 1720 301012 650 1190 209014 480 880 154016 370 670 118018 290 530 93020 230 430 75022 350 62024 300 520
Legend
d1 = Flange diameter (mm) d2 = Core diameter (mm) d3 = Borehole diameter (mm)
l1 = Outside width (mm)l2 = Winding width (mm)
Delivery Spools
61HUBER+SUHNER
AustrAliA HuBEr+suHNEr (Australia) Pty ltd Unit 6, 4 Skyline Place Frenchs Forest AU-Sydney NSW 2086 Tel. +61 (0)2 8977 1200 Fax +61 (0)2 9972 7549 [email protected]
BrAzil HuBEr+suHNEr América latina ltda Av. Rui Barbosa, 3613 Alto da Ponte BR-12212-531 São José dos Campos-SP Tel. +55 12 3946 9500 Fax +55 12 3946 9528 [email protected]
CHiNA HuBEr+suHNEr (Hong Kong) ltd Unit 1101 & 1121, Level 11, Tower 1 Grand Central Plaza No. 138 Shatin Ruralo Committee Road Shatin, N.T., HK-Hong Kong Tel. +852 2866 6600 Fax +852 2866 6313 [email protected]
HuBEr+suHNEr (shanghai) Co., ltd Part B 2-3, 2/F 333 Fu Te Xi Yi Road Waigaoqiao CN-Shanghai 200131, P.R. China Tel. +86 (0) 21 5899 3808 Fax +86 (0) 21 5899 1860 [email protected]
HuBEr+suHNEr (shanghai) Transmission & Communication Manufacture Co., Ltd 1330, Jin Hu Road Jin Qiao, Pu Dong New District CN-Shanghai 201206, P.R. China Tel. +86 (0) 21 5899 3808 Fax +86 (0) 21 5899 1860 [email protected]
DENmArK HuBEr+suHNEr A/s Kirke Vaerløsevej 14 DK-3500 Vaerløse Tel. +45 48 100 500 Fax +45 48 100 555 [email protected]
FrANCE HuBEr+suHNEr France 21 E, rue Jacques-Cartier FR-78960 Voisins-le-Bretonneux Tel. +33 (0)1 61 37 25 55 Fax +33 (0)1 30 64 73 68 [email protected]
GErmANy HuBEr+suHNEr GmbH Mehlbeerenstr. 6 DE-82024 Taufkirchen Tel. +49 (0)89 612 01 0 Fax +49 (0)89 612 01 162 [email protected]
HuBEr+suHNEr GmbH Schäftersheimerstr. 49 DE-97990 Weikersheim Tel. +49 (0) 7934 99 5630 Fax +49 (0) 7934 99 56310 [email protected]
iNDiA HuBEr+suHNEr Electronics Private limited 682, Udyog Vihar, Phase V IN-Gurgaon 122 016, Haryana Tel. +91 (0)124 452 6100/200 Fax +91 (0)124 410 27 04 [email protected]
mAlAysiA HuBEr+suHNEr (malaysia) sdn. Bhd. Lot 24, Jln Pengacara U1/48 Temasya Industrial Park 40150 Shah Alam MY-Selangor Tel. +60 3 7628 0202 Fax +60 3 7628 0303 [email protected]
siNGAPorE HuBEr+suHNEr (singapore) Pte ltd 11 Chang Charn Road #05-02 Shriro House SG-Singapore 159640 Tel. +65 6573 5500 Fax +65 6473 5522 [email protected]
swEDEN HuBEr+suHNEr AB Knarrarnäsgatan 7 Box 1247 SE-164 28 Kista Tel. +46 (0)8 447 5200 Fax +46 (0)8 447 5201 [email protected]
switzErlAND HuBEr+suHNEr AG CH-9100 Herisau Tel. +41 (0)71 353 41 11 Fax +41 (0)71 353 44 44 [email protected]
HuBEr+suHNEr AG CH-8330 Pfäffikon ZH Tel. +41 (0)44 952 22 11 Fax +41 (0)44 952 24 24 [email protected]
tHAilAND HuBEr+suHNEr (thailand) Co., ltd. 896/3 SV City Office Tower 1 4th Floor, Rama III Road Kwaeng Bangpongpang Khet Yannawa TH-Bangkok 10120 Tel. +66 (0)2 682 6868 Fax +66 (0)2 682 6669 [email protected]
uNitED KiNGDom HuBEr+suHNEr (uK) limited Telford Road GB-Bicester Oxfordshire OX26 4LA Tel. +44 (0)1 869 364 100 Fax +44 (0)1 869 249 046 [email protected]
usA HuBEr+suHNEr, inc. 19 Thompson Drive US-Essex Jct. VT 05452 Tel. +1 800 493 9758 Fax +1 802 878 9880 [email protected]
uAE HuBEr+suHNEr middle East trading llC Dubai Investments Park* European Business Center, Office 156 N 25° 00’ 13.83’’/ E 55° 09’ 19.06’’ P.O.Box 75843 Dubai (United Arab Emirates) Tel. +971 4 81 35 35 - 0 Fax +971 4 81 35 35 - 1 [email protected]
Customized Automotive solutions. wherever you are.
62 HUBER+SUHNER
hubersuhner.com
HUBER+SUHNER is certified according to
ISO 9001, ISO 14001, ISO/TS 16949 and IRIS.
8407
8173
/01.
2009
WAIVERIt is exclusively in written agreements that we provide our customers with warrants and representations as to the technical specifications and/or the fitness for any particular purpose. The facts and figures contained herein are carefully compiled to the best of our knowledge, but they are intended for general informational purposes only.
HUBER+SUHNER AG Radio Frequency Division Degersheimerstrasse 14 9100 Herisau Switzerland Tel. +41 71 353 4111 Fax +41 71 353 4590 [email protected]
hubersuhner.com
HUBER+SUHNER is certified according to
ISO 9001, ISO 14001, ISO/TS 16949 and IRIS.
WAIVERIt is exclusively in written agreements that we provide our customers with warrants and representations as to the technical specifications and/or the fitness for any particular purpose. The facts and figures contained herein are carefully compiled to the best of our knowledge, but they are intended for general informational purposes only.
HUBER+SUHNER AG Low Frequency Division Tumbelenstrasse 20 8330 Pfäffikon Switzerland Tel. +41 44 952 2211 Fax +41 44 952 2670 [email protected]
8406
0241
Rev
.A/0
8.20
11