YARDIMCI EKİPMAN KATALOĞU
AUXILIARY EQUUIIPPMMEENNTT CCAATALOGUEAUXILIARY EQUUIIPPMMEENNTT CCATALOGUE
HAKKIMIZDA
3
TSP machine with professional experience more than 30 years continue to export high quality plastic injection machines and auxiliaries machine to Turkish plastic manufacturers.
With its target to be a leader of technological improvement, TSP machine, continue to develop its product variety, add Italian SB company with its production underground more than 20 years.
SB with its experience has positive references about raw material automation, dozing units and pet drying units especially in Italy and Europe.
Thanks to patented MOBY application, they can shorten in a surprising way and reduce cost of energy per minute.
Also they can be solution partner according to users demands and apply your solutions. The materials of Material auto-loader, gravimetric and volumetric auto-loaders, material dryers have high quality standards.
After production, the machines have tested by both factory staffs and some institutions which gives global certi cates and been equipped with certi cate of capacity.
TSP Makine sahip oldu u 30 y l a k n sektör tecrübesi ile Türk plastik üreticisine yüksek standartlarda kaliteli makine ve yard mc ekipman temin etmeye devam etmektedir.
Teknolojik geli melerin öncüsü olmak hede yle her geçen gün ürün yelpazesini geni letmeye devam eden TSP Makine; ürün gam na 20 y ll k üretim geçmi i olan talyan SB rmas n da ekledi.
SB sahip oldu u tecrübe ile talya ve özellikle Avrupa’da hammadde otomasyonu, boya dozajlama sistemleri ve özellikle pet hammadde kurutma prosesinde çok ciddi olumlu referanslara sahiptir.
Patentli özel MOBY uygulamas sayesinde hammadde kurutma prosesini a rt c bir ekilde k salt p birim enerji maliyetini ciddi oranda dü ürmektedir.
Kullan c lar n ihtiyaçlar do rultusunda eksiksiz entegre çözümler üretmekte ve uygulamaktad r. Hammadde yükleyicileri, gravimetrik ve volümetrik yükleyiciler, hammadde kurutucular üretimi esnas nda seçilen malzemeler çok yüksek kalite standard na sahiptirler.
Üretim sonras nda fabrika içerisinde ve global onaylanm serti ka veren kurulu lar taraf ndan cihazlar test edilmekte ve kapasite raporlar ile belgelendirilmektedir.
Sat sonras mü teri prosesinde ürünler profesyonel servis ekibi taraf ndan devreye al n p son kontrolü yap lmaktad r.
Trifaze Hammadde Yükleyicileri FTB Serisi
4
FTB SER S HAMMADDE YÜKLEY C LER / FTB HOPPER LOADERS
• Özel uygulamalarda 15 kW’a kadar ç kabilen emi motoru ba lant olana• Granül proses P.S.A. kg /dm3 0,65• Basma yüksekli i = 3 m • Emme mesafesi = 4 m• Daha büyük mesafelerle ilgili bilgi edinmek için kapasite seçim e risine bak n z.
• Possibilty of suction unit with power until 15kW for special applications • Production with granule P.S.A. kg/ dm3 0,65• Height of charge = 3m• Suction distannce = 4m• To get information about greater distances see the productivity graph
FTB HAMMADDE YÜKLEY C LEROtomatik üç fazl hammadde yükleyicileri FTB serisi, granül ve termoplastik malzemenin ta nmas için en iyi çözüm niteli indedir.
• Mikro i lemci kontrolü (standart)• Geni yüzey alan olan polyester ltre torbas• Otomatik ltre temizleme paslanmaz çelik hazne• Yap lan i e ait parametrelerin kolay planlanmas için uzaktan kontrol (opsiyonel)• süreçlerinin ve sürelerinin gerçek zamanl olarak görselle tirilmesi olana• Belli kon gürasyonlar için benzer giri lerin kullan lmas olana• Hammadde yükleme esnas nda kusursuz bir yal t m sa lamak için özel bir s zd rmaz contan n tak l oldu u hazne ba lant yap s• Dü ük ses < 80 dBa
Mod. FTB1 FTB2 FTB3 FTB4 FTB5
Emme Birimi - Suction Unit
Motor Gücü / Motor Power kW 0,75 1,1 1,5 2,2 3
Konteyner Kapasitesi / Container Capacity lt 3-5-8 5-8-12 8-12-20 20-40 40
Hacmi - Üretim / Throughout - Production kg/h 200/8lt 300/12lt 400/20lt 600/40lt 800/40lt
Statik Bas nç / Static Depression kPa 18 22 25 28 28
Maksimum Ses / Maximum Noise dBA 60 65 70 75 75
Boyutlar / Dimensions ø A mm 350 350 450 450 450
B mm 310 310 370 370 400
H mm 500 500 550 550 550
ø D mm 40 40 40 40 40
A rl k / Weight Kg 24 26 35 38 40
Mod. FTB Basic
Three-Phase Hopper Loaders FTB Series www.tspmakina.com
5
Özel uygulamalar için 150 lt’ye kadar konteyner olanaklarPossibility of contaniers with capacity until 150 lt for special applications
FTB HOPPER LOADERSThe FTB range of automatic three-phase hopper loaders, repre-sents the best solution for the transport of granular or reground thermoplastics material.
• Micropreccesor control (standard) • Polyster lter bag with large surface area• Automatic lter cleaning• Stainless steel containers• Remote contral (optional) for easy plans of work’s parameters• Possibilty of visualize in real time the work’s process and the times running• Visual display of possible alarms• Possibilty of personalized work’s programs• Possibilty to utilize the analogical entrances for particular co gurations• Hopper discharge tted with a special gasket to ensure perfect sealing during the suction cycle • Low noise < 80 dBa
Hammadde yükleyici cihaz temizleme sistemiFilter-cleaning system
emm
e ka
pasit
esi [
kg/h
] / su
ction
cap
acity
(kg/
h)
mesafe [m] / distance (m)
KAPAS TE SEÇ M E R SCAPACITY SELECTION CURVE
Mod. CTB1 CTB2 CTB3 CTB3S CTB4 CTB5
Konteynerler / Containers
Kapasite / Capacity lt 3 5 8 12 20 40
ø D mm 230 230 230 230 300 300
Boyutlar / Dimensions H mm 470 540 610 690 695 945
ø I mm 250 250 250 250 250 250
ø d mm 40 40 40 40 40-50 40-50
A rl k / Weight Kg 6 8 10 12 14 18
Mod. FTB Swan
SB Wireless Area Network
Monofaze Hammadde Yükleyicileri FSB
6
Emme Birimi / Suction Unit
Motor Gücü / Motor Power
Konteyner Kapasitesi / Container Capacity
Hacmi - Üretim / Throughput - Production
Statik Bas nç / Static Depression
Maksimum Ses / Maximum Noise
Boyutlar / Dimensions
A rl k / Weight
Ø D HØ I
FSB SER S HAMMADDE YÜKLEY C LER / FSB HOPPER LOADERS• Denge val ni kontrol etmeyen basitle tirilmi kontrol özelli i olan versiyon• Granül yap s P.S.A. kg /dm3 0,65 • Basma yüksekli i = 3m• Emme mesafesi = 4m• Daha büyük mesafelerle ilgili bilgi edinmek için kapasite seçim e risine bak n z.
• Version with simpli ed control not controlling the proportional valve.• Production with granule P.S.A. kg / dm3 0,65• Height of charge = 3m• Suction distance = 4m• To get information about greater distances see the productivity graph
FSB SER S HAMMADDE YÜKLEME C HAZLARI Otomatik tek fazl hammadde yükleyici cihazlar n n FSB serisi, granül ve termoplastik malzemenin ta nmas için en iyi çözüm niteli indedir.
• Mikro i lemci kontrolü (standart)• Geni yüzey alan olan polyester ltre torbas• Otomatik ltre temizleme• Paslanmaz çelik hammadde haznesi• Yap lan i e ait parametrelerin kolay planlanmas için uzaktan kontrol (opsiyonel)• süreçlerinin ve sürelerinin gerçek zamanl olarak görselle tirilmesi olana• Olas alarmlar n görsel gösterimi• Yükleme süreçlerinin de i tirilebilmesi özelli i• Belli kon gürasyonlar için benzer giri lerin kullan lmas olana• Hammadde yükleme s ras nda kusursuz bir yal t m sa lamak için özel bir s zd rmaz contan n tak l oldu u hazne ba lant yap s• Dü ük ses debisi < 80 dBa
SWANBir mikro PLC kontrol özelli i kullanan teknoloji, hammadde yükleyici cihaz n n üzerindeki klavyeden veya kablosuz bir radyo kontrol özelli i ile sistem parametre ayarlar n n yap lmas n sa lar. Standart kontrol prog-ram , olas alarmlar gösterirken bile, makine zaman ak ayar n n yap lmas n ve zaman ak n n hammadde yükleyici cihaz n n ön k sm nda bulunan 5 dijital ekranda görselle tirilmesini sa lar. Program üzerinde de i-iklik istenildi i takdirde kolay yüklenebilir bir paket eprom göndererek talep üzerine de i iklik yap labilir.
SWANTechnology that, exploiting a micro-PLC control, allows the system-parameters’ setting through a keyboard set on the hopper-loader or through a Wireless radio-control. The standard-control program allows the machines-time- ow setting and visualisation on a 5 digit display, even indicating possible alarms, set on the frontal of the hopper-loader. The program can be modi ed on request by sending a pocket eprom containing the in board-simply-downloadable program.
KABLOSUZ RADYO KONTROLTüm makine parametrelerinin ayarlanmas na ve olas alarm-lar n s f rlanmas na olanak sa layan infrared teknolojili kab-losuz mesafe kontrolüdür. Ayn tesiste bulunan birden çok hammadde yükleme cihaz için kullan labilir.
WIRELESS RADIO - CONTROLWireless distance control with infrared technology allowing the setting of all the machine parameters and the rest of possible alarms. It can be used for several hopper-loaders placed in the same premise.
Mod. FSB2 Swan
Denge val PVB1Proportional valve
Monophase Hopper Loaders FSB www.tspmakina.com
7
FSB HOPPER LOADERSThe FSB range of automatic monophasic hopper loaders, represent the best solution fort he transport of granular or reground thermoplastics material.
• Microprocessor control (standard)• Polyester tler bag with large surface area• Automatic lter cleaning• Stainless steel container• Remote control (optional) for easy plans of work’s parameters• Possibility of visualize in real time the work’s processes and the times running• Visual display of possible alarms• Possibility of personalized work’s programs• Possibility to utilize the analogical entrances for particular con gurations• Hopper discharge tted with a special gasket to ensure perfect sealing during the suction cycle• Low noise < 80 dBa
Dolum cihaz temizleme sistemiFilter-cleaning system
FSC SER S BASINÇLI HAVA LE ÇALI ANHAMMADDE YÜKLEME C HAZLARI• Bas nçl hava ile kontrol edilen uidi kasyon yoluyla tanecik ta ma• Maksimum malzeme ta ma s cakl : 80°C• Minimum yük• Yüksek güvenilirlik• Mikro i lemci kontrol sistemi• Hatal dolum alarm
SERIES FSC COMPRESSED AIR HOPPER-LOADER• Granule’s transportation through compressed air controlled uidication• Material’s transportation maximum temperature: 80oC• Minimum encumbrance• Great dependability• Microprocessor controlling system• Missed charging alarming
Monofase tek fazlMonofase single-phase
Elektrik Ba lant s 230V/50- 60 HzBas nçl Hava Yükleme / Compressed Air LoadEmilim / AbsorbitionKonteyner Kapasitesi / Container Capacity Hacmi / Üretim – Throughput / Production
Hava tüketimi / Air consumptionMaksimum ses / Maximum NoiseA rl k / Weight
P.S.A. kg/dm3 0.65, 2.5 m basma yüksekli i,3m emme yüksekli i ve 6 bar bas nc olan i hacmi.Throughput with P.S.A. kg/dm3 0.65 height of charge 2.5m,suction distance 3m and pressure 6 bar.
FSC SER S BASINÇLI HAVA LE ÇALI AN HAMMADDE YÜKLEME C HAZLARISERIES FSC COMPRESSED AIR HOPPER-LOADER
emm
e ka
pasit
esi [
kg/h
] / su
ction
cap
acity
(kg/
h)
mesafe [m] / distance (m)
Mod. FSB0
KAPAS TE SEÇ M E R SCAPACITY SELECTION CURVE
Mod. DB/N530 DB/N540 DB/N550/S DB/N360 DB/N370/S DB/N370/S
Elektrik Ba lant s V-Hz Üç fazl / Three-phase / 380 / 415V-50 / 60 Hz
Hazne Hava Ak / Hopper Air Flow m3/h 125 185 250 300 350 550
lem Vantilatör Gücü / Process Blower Power kW 1,1 1,5 2,2 4 4 5,5
Statik Bas nç / Static Pressure mbar 160 200 240 240 260 260
NT 6 6 9 15 20 25
Is tma Gücü / Heating Power kW MT
HT 9 9 12 20 25 30
NT 10,3 11,5 15,2 29,5 34,5 50,5
Toplam Güç / Total Power kW MT
HT 13,3 14,5 18,2 34,5 39,5 55,5
NT 50-100 50-100 50-100 50-100 50-100 50-100
lem S cakl / Process Temperature °C MT 50-150 50-150 50-150 50-150 50-150 50-150
HT 50-180 50-180 50-180 50-180 50-180 50-180
80°C Ortalama Tüketim / Average Consumption kW/h 3,5 4,5 6,5 7 10 12
Hazne Kapasitesi / Hopper Capacity lt 200-300 300-400 500-600 600-800 800-1000 1000-1500
ø Borular / ø Hoses ød mm 50 63 63 89 89 89
Boyutlar / Dimensions A mm 650 820 820 1100 1100 1100
B mm 650 785 785 1100 1100 1100
H mm 1500 1835 1835 2100 2100 2100
Ses / Noise dB 63 70 70 73 73 73
A rl k / Weight Kg 230 272 272 470 530 530
Nem Alıcılar seri DB/N 530/370 - seri DB/N 380/720
8
DB/N 530/370/380/720DB 530/370/380/720 serisi, teknik plastik malzemelerin kurutulmas için sunulmu en geli mi çözümdür.
• ki blower – iki kurutuma kulesi• Nem çeken tüm plastik hammaddeler için kullan labilir.• Muazzam çi lenme noktas (eksi 60 derecedeki havan n ta yabilece i nem miktar na indirir)• Mikro i lemci kontrolü ile yüksek hassasiyetli ar za te hisi ve kurutma durum gösterge paneli • Merkezi görsel uyar alarm• Tüm hatalar ekrana uyar olarak yans r• Yüksek emi gücü olan blower’lar n sa lad sürekli debili hava ak• Dü ük enerji tüketimi• Kompakt boyutlar• lem s cakl 50-200oC• 80 – 200oC’ye kadar çal abilen güçlü yap
* Mümkün olan hazne kapasitesi 6000-8000 It / Possibility of hoppers capacity 6000-8000 lt
Mod. DB/N 320 HB/N 200
www.tspmakina.com
9
Dehumidifying Air Dryers serie DB/N 530/370 - serie DB/N 380/720
DB/N 530/370/380/720The DB/N 530/370/380/720 serie represents the most advanced solution for drying technical plastic material.
• Two pumps-two beds• Treatment of all hygroscopic plastic material• Excellent dew-point (minus 60 degrees C)• Microprocessor control with high precision diagnostic fault nding and drier status display• Centralised visual alarm• Speci c alarms shown on the display• Constant air ow guaranteed by high pressure blowers• Low energy consumption• Compact dimensions• Proceess temperature 50-150 degrees C• High temperatures version until 80 degress C
1- Kurutucu makine üstü montaj ekli / The hopper is mounted on the moulding machine2- Kurutucu makine yan montaj ekli / Dehumidifying hopper on mobile frame3- ki ya da daha fazla üretim makinesi için merkezi kurutma / The material is supplied to two or more moulding machines
Mod. DB/N 306
HBM 15 Mikserli HazneHopper HBM 15 With Mixer
Ak Kontrol Val Flux Controlling Valve
Nem Alıcılar seri DB/N 530/370 - seri DB/N 380/720
10
• Bildirilen de erler, hammaddenin kalitesine, nemlilik ba lang ç içeri i gibi özelliklere göre de i iklik gösterebilir.• Her bilgi, yakla k 0,65 kg/dm3 çekim gücü olan granül yap s ile ilgilidir.• Kurutma i leminde kullan lan malzemelerin üreticisinin talimatlar da dikkate al nmal d r. Kuruculu silolar n hacmi sabit oldu undan, en iyi performans almak için her zaman daha fazla hava kapasitesi olan bir kuru hava jeneratörü seçilmesi tavsiye edilir.
• The values reported may vary dependently on resin quality, humidity initial content,etc.• Each information refers to the commercial granule having a speci c gravity of about 0,65 kg/dm3.• Instructions of the drying-process material’s producer have to be absolutely kept on mind. Being constant the volume of the hoppers, it is always advisable the combination with a generator having a greater-air-capacity to obtain the best performance.
ABS 80 2-3 59 80 86 107 134 160 165 208 215 252 259 390
CA 75 2-3 59 80 86 107 134 160 165 208 215 252 259 390
CAB 75 2-3 59 80 86 107 134 160 165 208 215 252 259 390
CP 75 3 48 67 72 89 111 134 138 168 173 210 216 315
LCP 150 4 37 49 53 67 83 99 102 126 130 157 162 236
PA 75-80 4-5 32 44 47 59 74 89 92 115 118 144 148 216
PAEK 150-160 4 37 49 53 67 83 99 102 126 130 157 162 236
PBT 110-140 3-4 42 57 61 76 95 113 116 148 152 185 190 278
PC 120 2-3 58 80 87 107 134 160 165 208 214 252 259 390
PE 90 1-1,5 95 134 144 178 222 267 275 346 356 433 445 650
PE Black 90 2-3 59 80 87 107 134 160 165 208 214 252 259 390
PEEK 150 3 48 67 72 89 111 134 138 168 173 210 216 315
PEI 150 3-4 42 57 61 76 95 113 116 148 152 185 190 278
PEM 170 4-6 30 40 43 54 67 80 82 104 107 130 134 195
PES 150-160 4 38 49 53 67 84 99 102 126 130 157 162 236
PET 120-140 3-4 42 57 61 76 95 113 116 148 152 185 190 278
PET-G 65-70 3-4 38 57 61 76 95 113 116 148 152 185 190 278
PI 120-140 2-3 59 80 86 107 134 160 165 208 214 252 259 390
PMMA 90-100 2-3 59 80 86 107 134 160 165 208 214 252 259 390
POM 95-1100 2-3 59 80 86 107 134 160 165 208 214 252 259 390
PP 90 1-1,5 96 134 144 178 222 268 276 346 356 433 446 650
PPO 110-120 1-2 73 113 122 149 185 222 229 252 259 315 325 472
PPS 140-150 3-4 38 57 61 76 95 113 116 148 152 185 190 278
PS 80 1-1,5 96 134 144 175 222 268 276 346 356 433 446 650
PSU 120-150 3-4 38 57 61 76 95 99 102 148 152 185 190 278
PUR 80-90 2-3 59 80 87 107 134 160 165 208 214 252 259 390
PVC 70-75 1-1,5 96 134 144 175 222 267 275 346 356 433 446 650
SAN 80 2-3 59 80 87 107 134 160 165 208 214 252 259 390
SB 80 2 71 97 104 129 161 189 195 252 259 315 325 472
Malzeme S cakl k Süre DB/N530 DB/N540 DB/N550 DB/N360 DB/N370 DB/N370/S Material Temperature (°C) Time (h)
EnjeksiyonInjection
PROSES / PRODUCTION
Seçim tablosu / Selection table Kurutma kapasitesi / Drying capacity
HB/N200 HB/N300 HB/N300 HB/N400 HB/N500 HB/N600 HB/N600 HB/N800 HB/N800 HB/N1000 HB/N1000 HB/N1500
www.tspmakina.com
11
Dehumidifying Air Dryers serie DB/N 530/370 - serie DB/N 380/720
• Bildirilen de erler, hammaddenin kalitesine, nemlilik ba lang ç içeri i gibi özelliklere göre de i iklik gösterebilir.• Her bilgi, yakla k 0,65 kg/dm3 çekim gücü olan granül yap s ile ilgilidir.• Kurutma i leminde kullan lan malzemelerin üreticisinin talimatlar da dikkate al nmal d r. Kuruculu silolar n hacmi sabit oldu undan, en iyi performans almak için her zaman daha fazla hava kapasitesi olan bir kuru hava jeneratörü seçilmesi tavsiye edilir.
• The values reported may vary dependently on resin quality, humidity initial content,etc.• Each information refers to the commercial granule having a speci c gravity of about 0,65 kg/dm3.• Instructions of the drying-process material’s producer have to be absolutely kept on mind. Being constant the volume of the hoppers, it is always advisable the combination with a generator having a greater-air-capacity to obtain the best performance.
ABS 80 2-3 266 380 401 490 520 615 650 705 740 780 935 1040 1300
CA 75 2-3 266 380 401 490 520 615 650 705 740 780 935 1040 1300
CAB 75 2-3 266 380 401 490 520 615 650 705 740 780 935 1040 1300
CP 75 3 222 310 325 415 435 515 545 585 615 650 780 866 1083
LCP 150 4 167 230 243 310 325 385 405 435 460 487 585 650 812
PA 75-80 4-5 152 210 222 275 290 340 360 390 410 433 520 577 722
PAEK 150-160 4 167 230 243 310 325 385 405 435 460 487 585 650 812
PBT 110-140 3-4 196 270 286 350 370 440 465 503 530 557 670 742 928
PC 120 2-3 267 380 401 490 520 615 650 585 740 780 935 1040 1300
PE 90 1-1,5 458 635 669 825 870 1025 1080 1170 1235 1300 1550 1730 2166
PE Black 90 2-3 267 380 401 490 520 615 650 705 740 780 935 1040 1300
PEEK 150 3 223 308 324 415 435 515 545 585 615 650 780 866 1080
PEI 150 3-4 196 270 286 350 370 440 465 503 530 557 668 742 928
PEM 170 4-6 138 190 200 245 260 308 325 350 370 390 470 520 650
PES 150-160 4 167 230 243 310 325 385 405 435 460 487 585 650 812
PET 120-140 3-4 196 270 286 350 370 440 465 503 530 557 670 742 928
PET-G 65-70 3-4 196 270 286 350 370 440 465 503 530 557 670 742 928
PI 120-140 2-3 267 380 401 490 520 615 650 705 740 780 935 1040 1300
PMMA 90-100 2-3 367 380 401 490 520 615 650 705 740 780 935 1040 1300
POM 95-1100 2-3 367 380 401 490 520 615 650 705 740 780 935 1040 1300
PP 90 1-1,5 459 635 669 825 870 1025 1080 1170 1235 1300 1550 1730 2165
PPO 110-120 1-2 335 460 486 615 650 775 815 880 925 975 1170 1300 1625
PPS 140-150 3-4 196 470 286 350 370 440 465 503 530 557 670 742 928
PS 80 1-1,5 459 635 669 825 870 1025 1080 1170 1235 1300 1550 1730 2166
PSU 120-150 3-4 196 270 286 350 370 440 465 503 530 557 670 742 928
PUR 80-90 2-3 267 380 401 490 520 615 650 705 740 780 935 1040 1300
PVC 70-75 1-1,5 459 635 669 825 870 1025 1080 1170 1235 1300 1550 1730 2165
SAN 80 2-3 267 635 401 490 520 615 650 705 740 780 935 1040 1300
SB 80 2-2,5 335 450 472 560 590 705 740 880 925 975 1170 1300 1600
Malzeme S cakl k Süre DB/N380 DB/N390 DB/N390/S DB/N400 DB/N400/S DB/N710 DB/N720 Material Temperature (°C) Time (h)
EnjeksiyonInjection
PROSES / PRODUCTION
Seçim tablosu / Selection table Kurutma kapasitesi / Drying capacity
HB/N1000 HB/N1500 HB/N1500 HB/N2000 HB/N2000 HB/N2500 HB/N2500 HB/N3000 HB/N3000 HB/N3000 HB/N4000 HB/N4000 HB/N5000
Nem Alıcılar seri DB/N 530/370 - seri DB/N 380/720
12
Kapasite Mod. HB/N300 HB/N400 HB/N500 HB/N600 HB/N800 HB/N1000 HB/N1500 HB/N2000 HB/N2500 HB/N3000 HB/N4000 HB/N5000
Capacity dm3 300 400 500 600 800 1000 1500 2000 2500 3000 4000 5000
ø D mm 690 690 790 790 900 1000 1015 1015 1250 1500 1500 1500
H mm 1560 1820 1860 2005 2390 2750 2900 3480 3770 3145 4270 3770
Boyutlar A mm 220 220 220 220 220 220 220 220 220 220 220 220
Dimensions B mm 270 270 270 270 270 315 315 315 315 315 315 315
ø C mm 90 90 90 90 90 130 130 130 130 130 130 130
ø d mm 63 63 63 89 89 125 125 125 125 150 150 150
* Mümkün olan hazne kapasitesi 6000-8000 It / Possibility of hoppers capacity 6000-8000 lt
Mod. DB/N380 DB/N390 DB/N390/S DB/N400 DB/N400/S DB/N710 DB/N720
Elektrik Ba lant s V-Hz Üç fazl / Three-phase / 380 / 415V-50 / 60 Hz
Hazne Hava Ak / Hopper Air Flow m3/h 550 650 900 1000 1200 1600 2000
lem Vantilatör Gücü / Process Blower Power kW 5,5 7,5 11 11 11 7,5+7,5* 11-11*
Statik Bas nç / Static Pressure mbar 260 260 260 260 260 260
NT 25 30 35 35 40 49,5 69
Is tma Gücü / Heating Power kW MT
HT 30 35 41 41 45 64 99
NT 51,5 58,5 66,5 66,5 71,1 104 125
Toplam Güç / Total Power kW MT
HT 56,5 63,5 71,5 71,5 75,5 126 157
NT 50-100 50-100 50-100 50-100 50-100 50-100 50-100
lem S cakl / Process Temperature °C MT 50-150 50-150 50-150 50-150 50-150 50-150 50-150
HT 50-180 50-180 50-180 50-180 50-180 50-180 50-180
80°C Ortalama Tüketim / Average Consumption kW/h 14 20 21 22 27 45 56
Hazne Kapasitesi / Hopper Capacity lt 1000-1500 1500-2000 2000-2500 2000-2500 2500-3000 3000-4000 4000-5000
ø Borular / ø Hoses ød mm 125 125 125 125 125 125 125
Boyutlar / Dimensions A mm 1100 1100 1100 1100 1100 1500 1500
B mm 1950 1950 1950 1950 1950 2500 2500
H mm 2230 2230 2230 2230 2230 2250 2250
Ses / Noise dB 75 76 76 76 76 78 78
A rl k / Weight Kg 595 720 800 800 800 1900 1900
*Çift Faz / Double BlowManyetik k lavuzlar GM1 VE GM2 Magnetic grids GM1 and GM2
www.tspmakina.com
13
Dehumidifying Air Dryers serie DB/N 530/370 - serie DB/N 380/720
DB/N - Multi-temperature application with a single dehumidi ed air generator and indipendent heating-boosters on the processing hoppers (optional : material anti-stress system to adjust each air ow).
DB/N - Bir kuru hava jeneratörü, çoklu kurutucu ve proses uygulamas .
DB/N Makine üstü kurutucu uygulamasDB/N – Application directly on the
transforming machine
DB/N Makine yan uygulamaDB/N – Application with 2 ways-feeding of
dehumidi ed material.
EDB Serisi Sıcak Havalı Kurutucuları
14
EDB SER S SICAK HAVALI KURUTUCULARI
EDB serisi s cak haval kurutucular , tüm nem almayan termoplastik malzemelere uygulanmak üzere geli tirilmi tir. Kurutma döngüsünün iyile mesi için dönü havas n n bir k sm veya tamam yeniden i leme sokulabilir.Bu birimler do rudan enjeksiyon makinesinin veya extruderin mal alma bölümüne uygulanabildi i makine yan eklinde konumland rmas da mümkündür.
• Sabit hazne hava debisi• Dijital ekranl elektronik i lem s cakl kontrolü• Dijital ekranl alarm• Alarml s düzenleyici• 140°C'ye kadar aç k devre ile çal ma• Yüksek s vantilatörleri• 150 It’ye kadar haznelerde makineye do rudan montaj tavsiye edilir.• 150 It’den fazla olan hazneler için makine yan uygulama yap lmas tavsiye edilir.
Mod. EDB21 EDB22 EDB23 EDB32 EDB33 EDB34 EDB36
Elektrik Ba lant s VHz Tek fazl / Single-phase 230V-50Hz Üç fazl / Three-phase 380V-50HZ
Motor Gücü / Motor Power kW/h 0,09 0,12 0,18 0,12 0,18 0,35 0,35
Hazne Hava Ak / Hopper Air Flow m3/h 40 75 125 75 125 185 380
Is tma Gücü / Heating Power kW 1,5 2,7 3,5 2,7 3,5 6 12
Toplam Yüklenen Güç / Total Installed Power kW 1,59 2,86 3,68 2,86 3,68 6,35 12,55
Maks. lem S cakl / Max. Process Temperature °C 140 140 140 140 140 140 140
Ortalama Tüketim / Average Consumption kW/h 0,8 1,5 1,9 1,5 1,9 3,5 6,5
Hazne Kapasitesi / Hopper Capacity lt 15-30-60 60-100-150 150-200-300 60-100-150 150-200-300 400-500-600 800-1000
ø D 353 413-503-495 495-495-690 413-495-503 495-495-690 700-790 700-700-810
Boyutlar / Dimensions °C H 475-775 997-1192-342 1342-1622-1700 997-1192-1342 1342-1622-1700 1820-1860 1820-1860-2110
E 503 613-703-695 695-695-890 613-703-695 695-695-890 960-1000 960-1000-1070
F 320 60-600-600 650-650-650 600-600-600 650-650-650 770-770 830-830-830
Ses / Noise dB 51 53 58 51 53 58 58
Birim A rl / Unit Weight kg 12 25 30 38 42 49 52
Mod. EDB 22 - HB/N 100
EDB SER S SICAK HAVALI KURUTUCULARIEDB SERIES HOT-AIR DRYERS
www.tspmakina.com
15
Hot - Air Dryers EDB
EDB SERIES HOT-AIR DRYERS
The EDB range of hot air dryers, has been developed for the treatment of all non-hygroscopic thermoplastics materials. The drying cycle is optimized by a system which recycles all or part of the return air, relative to the initial percent-age moisture content of the granule. Althoug these units have an ideal applica-tion when installed directly on the barrel of the moulding machine or extruder, it is possible to install them at the most convenient side of the machine.
• Stable hopper air ow• Electronic process temperature control with digital display• Alarm with digital display• Process thermoregulator with alarm• Working with open circuit until 140oC• High head blowers• With hoppers until 150 lt. is advisable a direct installation on the machine• With hoppers higher than 150 lt, is advisable a installation at the side of the machine with retransport of the material
Mod. EDB5 EDB6 EDB7 EDB8 EDB9 EDB10
Elektrik Ba lant s VHz Üç fazl / Three-phase 380V-50Hz
Motor Gücü / Motor Power kW 2,2 4 5,5 7,5 11 13,5
Hazne Hava Ak / Hopper Air Flow m3/h 300 400 550 750 1100 1500
Is tma Gücü / Heating Power kW 9 15 18 27 39,5 39,5
Ses / Noise dB 40 45 50 55 60 60
Maksimum lem S cakl / Max. Process Temperature °C 140 140 140 140 140 140
80°C Ortalama Tüketim / Average Consumption kW/h 5,5 5,5 5,5 7,5 22,5 22,5
Hazne Kapasitesi / Hopper Capacity lt 600-800 800-1000 1000-1500 1500-2000 2000-2500 2500-3000
A mm 820 820 820 1100 1100 1100
Boyutlar / Dimensions B mm 785 785 785 1100 1100 1100
H mm 1835 1835 1835 2200 2200 2200
Birim A rl / Unit Weight Kg 150 150 150 150 150 150
EDB SER S MAK NE YANI SICAK HAVA KURUTUCULARIEDB RANGE FLOOR STANDING HOT AIR DRYERS
Mod. EDB 6
16
EDB Serisi Sıcak Havalı Kurutucuları
EDB21 EDB22/32 EDB23/33 EDB34 EDB36 HB/N15 HB/N30 HB/N60 HB/N100 HB/N150 HB/N150 HB/N200 HB/N300 HB/N400 HB/N500 HB/N600 HB/N800 HB/N1000
ABS 80 2 5 9 19 31 48 50 65 97 130 160 195 260 325
CA 75 2-3 4 8 15 26 39 40 52 78 105 130 156 208 260
PA 80-90 3-5 3 7 14 25 38 40 32 49 65 81 97 130 162
PC 120 2 5 9 19 32 48 50 65 98 130 162 195 260 325
PE* 90 1,5 8 17 26 43 65 68 86 130 173 215 260 345 433
PMMA 80 2-3 4 8 16 26 39 41 52 78 104 130 156 208 260
POM 100 2-3 4 8 15 25 38 40 51 77 103 129 155 207 258
PP 90 1,5 8 13 25 43 65 68 86 130 173 215 260 346 430
PPO 110 2 5 10 19 32 48 50 65 98 130 162 195 260 325
PS 80 1,5 6 13 26 43 65 68 86 130 173 216 260 345 430
PUR 90-100 2-3 4 8 15 26 39 41 51 78 105 130 155 208 260
PVC 70 1,5 6 13 26 43 65 68 86 130 173 216 260 346 430
*Kurutulacak hammadde / *Hygroscopic materials
Malzeme S cakl k SüreMaterial Temperature (°C) Time(h)
PROSES / PRODUCTION
Emme Val Suction Valve
N Tahliye sürgüsü HB/NDischarge base HB/N
Seçim tablosu / Selection table Kurutma kapasitesi / Drying capacity
HAZNELER
17
www.tspmakina.comHot - Air Dryers EDB
* Hammadde kurutmas• Kurutma i leminde hammadde üreticilerinin talimatlar n dikkate al n z.• Standart tanecik yap s ve normal artlar alt nda nem yüzdesine sahip olan malzemeden al nan veriler esas al nm t r.
* Hygroscopic materials• Mind the instructions of percentage due to the containment in standard sacsthe producer of the drying process materials.• Data obtained by materials containing an initial humidity.
Malzeme S cakl k SüreMaterial Temperature (°C) Time(h)
Manyetik Ayr t rma KutusuMagnetic Seperating Box
Kar t r c valf tak mMixing valve kit
PROSES / PRODUCTION
Seçim tablosu / Selection table Kurutma kapasitesi / Drying capacity
ABS 80 2 270 334 350 487 510 650 682 812 850 975
CA 75 2-3 208 267 280 390 409 520 546 650 680 780
PA 80-90 3-5 135 167 175 243 255 325 341 405 425 487
PC 120 2 268 332 348 484 509 648 680 810 850 975
PE* 90 1,5 357 446 468 650 682 886 908 1080 1132 1300
PMMA 80 2-3 214 267 280 390 409 520 545 650 680 780
POM 100 2-3 212 266 278 388 407 518 543 648 678 778
PP 90 1,5 345 445 467 650 682 866 908 1080 1132 1300
PPO 110 2 260 332 348 486 510 650 682 810 848 975
PS 80 1,5 346 445 467 650 682 866 908 1080 1132 1300
PUR 90-100 2-3 208 266 279 390 409 520 546 650 682 780
PVC 70 1,5 346 446 468 650 682 865 208 1080 1130 1300
EDB6 EDB7 EDB8 EDB9 EDB10HB/N800 HB/N1000 HB/N1000 HB/N1500 HB/N1500 HB/N2000 HB/N2000 HB/N2500 HB/N2500 HB/3000
Volümetrik Dozajlama Üniteleri COLOUR Serisi
18
VOLÜMETR K DOZAJLAYICILAR COLOUR SER S
Granül hammaddeler için volumetrik dozajlay c ünitelerdir. Enjeksiyon makineleri, extruderler, i irme makineleri için masterbatch’i ya da katk maddeleri kar m için uygundur.
• Extruderler için mevcut üç model vard r: Colour 1, Colour 2 ve Colour XT• Korozyon yaratmayan paslanmaz çelik ve alüminyum gövde yap s mevcuttur.• F rças z kademeli motor• Makineye do rudan ba lant yap lmas için adaptörlü• Colour 2 model dozajlay c da kolay tak labilen adaptör mevcuttur.• Dijital ayarlama ve kontrol ekran• Ba ms z kontrol paneli• Kompakt boyutlar ve kolay kurulum• Kar t r c serisi XI0 ve kar t r c serisi MX50'ye tak labilir.
SEÇENEKLER• Seviye• Merkezi bak m haznesi
mod. COLOUR 1
AxBm m 65 x 65
CxDm m 140 x 140
Em m 360
Fm m 430-444
Gm mø 210-210
Hm m 390
hm m 166
im m1 6
Lm m 210-270
Elektrik Ba lant s
Hazne Kapasitesi / Hopper Capacity
Vida Çap / Screw Diameter
Vida Hatvesi / Screw Pitch
Hacmi - Üretim / Throughput - Production
Güç / Power
Maksimum Emilim / Maximum Absorbition
Toplam A rl k / Total Weight
Ses / Noise
Elektrik Ba lant s
Hazne Kapasitesi / Hopper Capacity
Vida Çap / Screw Diameter
Vida Hatvesi / Screw Pitch
Hacmi - Üretim / Throughput - Production
Güç / Power
Maksimum Emilim / Maximum Absorbition
Toplam A rl k / Total Weight
Ses / Noise
BOYUTLAR / DIMENSIONS
Mod. Colour 1
Mod. Colour 1
Veri, P.S.A. 0.75 kg/dm3 ile / Data with P.S.A. 0.75 kg/dm3 Veri, P.S.A. 0.75 kg/dm3 ile / Data with P.S.A. 0.75 kg/dm3
www.tspmakina.com
19
Volumetric Dosing Units COLOUR Series
OPTIONS• Level Indicator • Central maintenance hopper
VOLUMETRIC DOSING COLOUR range
Volumetric dosing unit for granular materials, suitable for injection moulding machines or extruders and for dosing masterbach or additives.• Three models are available Colour 1, Colour 2 and Colour XT for extruders• Corrosion proo ng : stainless steel, aluminium• Stepper motor without brushes• Equipped with adapter for a direct coupling to the machine• Quick t plug for adaptor for Colour 2• Digital regulation and control display• Indipendent control panel• Compact dimensions and easy to install• It can be tted to mixer range X10 and mixer range MX50
KARI TIRICI TEKN K ÖZELL KLERTECHNICAL FEATURES MIXER
• ç k sm pürüzsüz çelik gövde Steel body with sand-treated inner part• Trifaze motor kontrol paneli Tri-phase motor’s control panel• Merkezlenmi kar t r c b çaklar ile elde edilen homojen kar m Mix obtained exploiting the rotation of a central swift• Volümetrik dozajl y c ya uygun gövde yap s sayesinde ekstra homojen kar m olu turur. Material homogeneous mix obtained thanks to the particular conformation of the body
mod. COLOUR 2
AxBm m 65 x 65
CxDm m 140 x 140
Em m 398
Fm m 527
Gm m 265
Hm m 407
hm m 166
im m5
Lm m 265
BOYUTLAR / DIMENSIONS
Kar t r c Modeli X10Mixer Mod. X10
Kar t r c Modeli X10Mixer Mod. X10
Mod. Colour 2
Kar t r c Modeli MX50Mixer Mod. MX50
Kar t r c Modeli MX50Mixer Mod. MX50
Elektrik Ba lant s
Motor Gücü / Motor Power
Hazne Kapasitesi / Hopper Capacity
Toplam A rl k / Total Weight
Gravimetrik Dozajlayıcılar SFGB Serisi
20
SFGB GRAV METR K DOZAJLAYICI ÜN TELER
Yüksek performans ve modülerite ile 25 ila 1500 kg/h aras nda üretim için kullan lan 40’tan fazla model bar nd ran dozajlay c serisi.
• Yüksek hassasiyette kar t rma• Yüksek güvenilirlik• Formül ve reçete içerikleri yüzde cinsinden ayarlanabilir. • Kar t r lacak hammaddenin yo unluk de i iminden ve parçac k boyutundan etkilenmeyen tasar m vard r. % 0.01 hassasiyet ile tam kontrol sa lar. • Hammaddeye temas eden yüzeyler paslanmaz çelik malzemeden üretilmi tir.• Tüm kar t r c ünitelerinde homojen bir kar m elde edebilmek için, dinamik kar t r c lar vard r.• Yap lan formülasyon i lem sonras belgelendirilebilir.• ki tür kontrol modül opsiyonu bulunur.
Mod SFGB1
Tart bölümüWeighting machine
Kontrol PaneliControl Panel
Elektirik Ba lant s
Olas Bile en Say s / Possible Components Number
Parti A rl / Batch Weight
Hacmi / Üretim - Throughput / Production
Kar t r c Tüketimi 0,25 / Mixer Consumption 0,25
Hava Bas nc Tüketimi / Air Compressed Consumption
S k t r lm Hava Bas nc / Air Compressed Pression
Boyutlar / Dimensions
A rl k / Weight
Hazne Kapasitesi / Hopper Capacity
Kar t r c Kapasitesi / Mixer Capacity
www.tspmakina.com
21
Gravimetric Dosing Units SFGB
SFGB GRAVIMETRIC DOSING UNITS
Range of more than 40 dosing units for prooduction from 25 to 1500 kg/h with high performances and modularity.
• High precision mixing• High reliability• Datas of recipes in percentages• The quantity of the material delivered is conditioned neither by bulk density’s changes nor by ganule’s size• Accurate Batch control with precision of 0.01%• All the material contact parts are in stainless steel• All the units are provided with dynamic mixers for a homogeneous mixing• Possibility of certi cation of the compaund• Two types of control are available: Standard or Economic
BOYUTLAR / DIMENSIONS
Kar t rma HaznesiMixing Chamber
22
Dikey Karıstırıcı MVB Depolama Siloları CTS
D KEY M KSERLER MVB SER S
MVB serisi mikserler dikey dönme hareketi ile granül malzemelerin boya ile renklendirilmesi veya ba ka bir ham-madde ile kar t r lmas için kullan lan makinelerdir.
• Enine ve dikey dönmeye ba l h zl hareket nedeniyle homojen ve sürekli renklendirme ve kar t rma sa lar.
• Güvenli mikro siviçler sayesinde koruma kapaklar n n aç lmas durumunda pros-esin durmas sa lan r.
• Koruma kapaklar ergonomik yap s ile kar m n yap ld hazneye kolay ula ma imkan verir.
• Koruma kapaklar n ve hammadde sevi-yesine ba l k ikaz lambas mevcuttur.
• Yüksek kapasiteli hammadde bo altma bölümü
• Manuel olarak bo alt m özelli i
D KEY M KSER / VERTICAL MIXER
CTS Stoklama KonteyneriCTS Stocking Container
www.tspmakina.com
23
Vertical Mixers - MVB Stocking Cointainers CTS
Hammadde silosu olarak da kullan labilen üründe tekerlekler ve
• Kullan c prosesinse uygun ayarlanabilen çal ma süresi • Galvanizli veya paslanmazdan çelikten imal edilebilen gövde yap s• Kolay hareket edebilen ase yap s • Hammadde emi sistemine uygun ba lant noktas• 100 ile 1000 kg hammadde kapasiteli ürünler vard r.
The ideal solution for the stocking of the plastic granules.They are provide with wheels and closing cover.
• Possibility of personalized solutions• Manufactured with painted steel or stainless steel• Easy to move• Predisposed to the drawing of the plastic granules by suction probes• Capacity from 100 to 1000 lt
VERTICAL MIXERS MVB RANGE
MVB are machines for coloring and for quick mixing granulated materials with vertical screw operation. • Homogeneous and continous colouring and mixing due to the quick movement given to the screw in trasversal and vertical direction.• Easy Access of the mixing chamber thanks to the opening of two hinged doors, protected by safety micro-switches• Mixing chamber with level warning light and inspection doors• High capacity hopper• Discharge with manual closing
BOYUTLAR / DIMENSIONS
24
Merkezi Tasıma Sistemleri
MERKEZ HAMMADDE OTOMASYON VE TA IMA S STEMLER
Plastik malzemelerin ta nmas için kullan lan geleneksel yöntemler daha fazla teknolojik üretim süreci ile desteklenmelidir. Her gün üstün bir kalite hede eyen daha çok say da irket, birçok parametre analizi yaparak bir ta ma süreci geli tirdi. Bu yeni teknolojilerin kabul görmesi, irketlerin gelecekteki ba ar s n n vazgeçilmez bir ön ko ulu olan sürekli kalitenin önünü açm t r. Ölçüm yapmak amac yla olu turulan üretim sistemlerimiz, ba ar l bir ekilde kontrol edilip testlerden geçirilen bu parametreler üzerinde yap lan ara t rman n sonucunda ortaya ç km t r.
Hammadde kurutmadan ba layan proses süreci üzerinde yap lan analizden unlar elde edilmi tir:• Hammaddelerin sürekli nemi al nm ve haz r olmas .• Ta nma i leminden önce optimum hammadde s cakl .
Merkezi hammadde kurutma i lemi; nem alma maliyetleri dü ürdü ü gibi kurutma süresini optimize eder. Entegre ve otomatik çal an merkezi ta ma sistemi üretimin verimlili ini artt rd gibi nihai ürünün teknik kalitesini artt r r. TSP – SB sahip oldu u proses tecrübesi ile üretim süreçlerinde geli me olmas n garanti eden ve optimum verimlilik sa layan sistemler olu turur.
BA LANTI PLANI SWAN S STEM CONNECTION LAY-OUT SWAN SYSTEMALARM EKRANI ALARM DISPLAY
SUNUCU CLIENT
UZAKTAN KONTROL REMOTE CONTROL
SB Kablosuz Alan A
STEMC SERVER
Equipment on injection moulding
SB Wireless Area Network
www.tspmakina.com
25
Central Conveying Systems
CENTRAL CONVEYING SYSTEMS
The traditional methods for the transformation of the plastic materials have to be assisted by more and more technological productive process. More and more companies, that aim at a superior quality, have created a transformation process by the analysis of several parameters. The adoption of these new technologies permitted a costant quality that is the indispensable pressupposition to quarantee the future success of the companies. Our productive systems, planned to measure, are the result of a research completed observing these parameters that are succefully checked and tested. Analysing the correct productive process starting from dehumidi cation, it is obtained:• Minimum and costant granule’s humidity• Optimum granule’e temperature before its transformationMaterial’s dehumidi cation by a centralized system directly in the stock-ing area, optimize the process with cost reduction. The integrated and automatic working helps the increase of the productivity and a technical particulars improvement of the nal product. SB is able to study the optimum solution for each different operative structure, guaranting high quality performances and a improvement of the single process.
Manuel Temizleme MerkeziManual Clearing Centralised Manifold
Filtre - Havaland rma Birimi ileFilter - Endowed Aspiration Unit
Ara Katta Yap lan Merkezi Kurutma lemiCentrealised Dehumidi cation On Loft
26
Intel Box Merkezi Otomatik Da t cIntel Box Centralised Automatic Manifold
Merkezi Elekrtopnömatik Toplay c (CEC)Central Electropneumatic Collector (CEC)
MERKEZ TA IMA S STEM / CENTRAL CONVEYING SYSTEM
VAKUM Ç ZG S / VACUUM LINE
MATERYAL Ç ZG S / MATERIAL LINE
Merkezi Tasıma Sistemleri