Download - Avaya Aura Comunication Manager and Cm Messaging r6

AVAYA AURA COMUNICATION MANAGER AND CM MESSAGING R6.0 IMPLEMENTATION EXAM (6002.1)

Previous Question Question 1 / 69 Next Question

When troubleshooting a system fault, if the web interface or SAT are unavailable, which methodshould be used?A. SALB. TTY2C. CLID. MODEM

Answer: C


Which two series support RAID 5 configuration for CM6.0? (Choose two)A. S8730 Server with 8 GB RAMB. S8800 Server with 12 GB RAMC. S8510 Server with 8 GB RAMD. S8300D Server with 8 GB RAM

Answer: B,CExplanation:


Hunt group number 99, with group extension 4199, is administered for messaging.Which command needs to be executed at the SAT terminal to troubleshoot hunt group 99?A. Shoe tracelog huntgroup 4199B. View logs real time huntgroup 99C. Display real time logs hunt group 99D. List trace hunt-group 4199

Answer: DExplanation:

Previous Question Question 6 / 69 Next

Question

On a media gateway G450, which slots are permitted for the MM 342?A. V1 and V2B. V6 and V6C. V3 and V8D. V5 and V7

Answer: CExplanation:


A customer is planning to upgrade from CM 5X to CM 6.0 an existing 8510 server.What is the total minimum memory requirement for this upgrade?A. 4 GB RAMB. 8 GB RAMC. 12 GB RAMD. 16 GB RAM

Answer: BExplanation:


Which screen is used while upgrading the system platform from release 6.0.0.09 to release6.0.0.11?A. Communication manager Web interfaceB. Console domain Server Management Path managementC. Console domain Server Management Platform UpgradeD. Console domain Virtual Machine Management



Which three statements about CM_Duplex CM 6.0 are true?A. Software duplication is available, but hardware duplication is not available.B. The S8510 server is not used for duplicationC. Server duplication is configured via �Failover� option on CDROMs web interface

D. S8730 with DAL 2 card does not support server duplication in CM 6.0.E. The CM duplex template supports CMM

Answer: A,B,DExplanation:


Which gateway command resets the Gateway back to factory default?A. ResetB. RestartC. SoftbootD. Nvram init



A technician wants to test and see if the voice channel between two IP phonesWhich command in site administration terminal (SAT) can be used to determine?A. Status station <extension>B. Status shuffling <extension>C. List station <extension>D. Test station <extension>

Answer: AExplanation:


Which Ethernet port on S8800 server is for server duplication?A. ETH0B. ETH1C. ETH2D. ETH3

Answer: DExplanation:Eth3 is use for the duplication (correct answer D)

It seems like both answers could be correct as per following links, however the latest release saysETH3.http://support.avaya.com/css/P8/documents/100067099 (November 2009 Release)http://support.avaya.com/css/P8/documents/100089493 (June 2010 Release)


Which three commands are port of Avaya Aura CM_survRemote_Embed templates?(Choose three)A. Utility servicesB. CM 6.0C. Session managerD. CMM 6.0E. AES 6.0

Answer: A,B,CExplanation:


A technician is planning to support to upgrade an Avaya communication Manager system torelease 6.0 from Release 5.2Which two tasks must be performed during the upgrade procedure? (Choose two)A. The S8700-series servers must be displayed by S8800 servers.B. All G350 gateways must replaced by S8800 servers.C. The survivable remote servers must be upgraded by Release 6.0D. The survivable Remote servers can stay at Release 5.2

Answer: A,CExplanation:


In the navigation pane, what are the steps to create a test mailbox on the Communicationmanager messaging 6.0 Application?A. Select messaging administration, then Subscribe Management, and then click Add or edit.B. Select messaging administration, the click new.C. Select messaging administration, Select messaging administration, and then click add.D. Select Forms control, and then at the command line run then add

subscribe command.



When configuring a G450 Media gateway, which two port settings must be set? (Choose two)A. FTP ServerB. 100 MB port speedC. Auto-negotiation enabledD. Full Duplex

Answer: B,DExplanation:


A switch administrator wants to busyout trunk 530for maintenance and administration workhowever, there is one call active on port 5 of the trunkWhich command should be extended from SAT terminal to find out IP addresses and port of thenear-end and far-end node of the auto connection?A. Status trunk 53/5B. List trace port 53/5C. Display trunk 53/5D. Display trunk statistics 53/5E. Status port 53/5



Which three objects can be downloaded from the product license delivery system (PLDS)?(Choose three)A. Authentication fileB. PatchesC. Firmware updatesD. PuTTYE. Communication manager templates

Answer: B,C,EExplanation:Authentication file will be downloaded fro RFA site. Unique authentication files are createdby the Authentication File System(AFS), an online application at http://rfa.avaya.com.


Which two statements describe the new procedures that a customer can use to directly andpermanently turn ON or OFF licensed features in CM 6.0? (Choose two)A. Customers can turn features ON or OFF using the change system parameters customeroptionscommand on the system access terminal (SAT).B. Customers can turn features ON or OFF using the system management interface featuresadministration page.C. Customers can PDLS directly to turn futures ON or OFF and then download and install a newlicense file with the updated features.D. Customers can turn features ON or OFF using the WebLM server and the system platformmanagement Console

Answer: C,DExplanation:


Which statement describes the action to assure the CM_SurvRemoteEmbeded template wasinstalled correctly?A. From a browser, using the communication manager IP address, successfully log into thecommunication manager system management.B. From a browser logged into communication Manager, Select administration > server(Maintenance)> server>Process Status. Click on view.C. From a browser logged into the system Management console verify cm, bsm, and utility_serverand application status is runningD. When monitoring the template installation workflow status, verify the message. �Wizardcompleted successfully� displays.



Which three statements about when communication manager release 6.0 is deployed as a featureserver are true? (Choose three)A. It supports G450/G430 gateways.B. It supports Analog trunks.C. It supports SIP telephones.D. It supports SIP trunks.E. It supports Digital trunks.

Answer: A,C,DExplanation:


When using the Avaya Site administrator CEDI interface, which command would be used to checkthe configuration of telephone set with the extension of 1000?A. Print station 1000B. Display station 1000C. Show station 1000D. View station 1000



Which three statements are true for a configuration that consists of Duplicated S8800 mainservers with a duplicated port network and is a survivable core? (Choose three)A. Software duplication exists between the two main S8800 servers.B. The two main servers have duplication IPSlsC. Hardware Duplication exists between the two main S8800 servers.D. The main servers share a single control networkE. All Clam media and Medpro cards must be in a one subnet

Answer: A,B,EExplanation:


A technician has installed pair or duplication S8800 servers with IPSI

duplication.Which two procedures indicate that the duplicate IPSIs are both operated? (Choose two)A. The enable operation of IPSI Duplication field on the display system-parameter duplication formis set to y.B. IPSI circuit packs have been installed slots 1 and 2 carrier A and one of the IPSI LEDs isflashing.C. Execution of the test IPserver-interface command for both IPSI circuit packs shows PASS in theresult column.D. A paring test executed from the servers to the IPSIs and from the IPSIs to the servers returnssuccess for the active IPSI and failure for the standby IPSI.



What are the recommended CLAN and MEDPRO port settings?A. 10Mbps half duplexB. 1000Mbps full duplexC. 100Mbps full duplexD. 100Mbps half duplex



Which two statements are true regarding a media gateway full back (recovery) to main (primary)servers? (Choose two)A. All active (stable) Ip calls on the media gateway drop when the media gateway falls back fromthe survivable remote server to the main server.B. The list survivable-processor command can be used to confirm that the remote Survivableserver is registered to the main server and that the remote survivable server is no longer active.C. When the main server recovers it issues registration requests to all the media gateways in thenetwork.D. Executing the status media-gateways command from the main server will show which mediagateways are registered with the main server.



To confirm that a survivable server is currently registered to the main CM servers, using the SAT.Which command should be enteredA. Status ess clustersB. Display survivable-processorsC. Status ess port-networksD. Status survivable-processors



A customer wants to enable audio encryption for Ip phone calls, but the potion is not available onany IP-codec-set.Which procedure must be followed to obtain this feature?A. From the SAT, type change system-parameter customer-options. Find the media Encryptionover IP field, and set the option to Y. Save the changeB. From the SMI Feature administration page, find the media Encryption over IP field Set theoption to Y. save the changesC. From the system platform WebLM page. Find the media Encryption over IP field set the optionto Y. Save the changes.D. From the Aura System Manager�s Feature Server Administration page. Find the mediaencryption over IP field, and set the option to Y. save the changes.



Which statement describes the action to assure the system platform was installed correctly?A. From the laptop connected to the network, ping the dom0 IP address and verify a successfulresponse.B. Immediately after the installation, verify the DVD is ejected from the

drive and that the serverreboots.C. After connecting the server using PuTTY and logging in as root, verify there are no errors whenrunning the xm list command.D. From the system management console browser, verify domain-0 and cdom are running



Which statement is true about duplex servers in CM 6.0?A. The survivable remote Duplex template includes branch session ,managerB. CM uses the high availability that system platform can now provideC. The license for the survivable server is different than the license file of the main serverD. The main and all survivable servers require an authentication file



System platform web console is used to apply the service pack for which three virtual machines?(Choose three)A. System platformB. AES 6.0C. Utility ServerD. Communication Manager 6.0E. CMM 6.0

Answer: A,C,DExplanation:


Which procedure must be followed while, migrating from CM 5.2.1 (S8800 Server with 2 HDD) toCM 6.0?A. Insert 3rd hard drive, run raid CD, and than run raid CD after rebooting.B. Take backup, store the backup locally, insert 3rd hard drive, and then run Raid CD after

rebooting.C. Insert the raid CD, reboot the server, and than take backup.D. Insert the hard drive and the 3rd hard drive is incorporated automatically.



Which procedure must be followed while, migrating from CM 5.2.1 (S8800 Server with 2 HDD) toCM 6.0?A. Insert 3rd hard drive, run raid CD, and than run raid CD after rebooting.B. Take backup, store the backup locally, insert 3rd hard drive, and then run Raid CD afterrebooting.C. Insert the raid CD, reboot the server, and than take backup.D. Insert the hard drive and the 3rd hard drive is incorporated automatically.



Which communication manager 6.0 command is used to add a new survivableA. add surviveable-processorB. add survivable-processor ess <node-name>C. add survivable-processor coreD. add survivable-processor <node-name>



Which Ethernet port on S8800 server is connected to the customer network?A. ETH0B. ETH1C. ETH2D. ETH3



When using the Avaya Site Administration GSDI interface, which command would be use to built anew telephone set with the extension of 1000?A. New station 1000B. Add station 1000C. Build station 1000D. Add set 1000



Which two components are part of the Avaya Aura CM_Simplex template? (Choose two)A. Utility servicesB. CM 6.0C. Session manager 6.0D. Avaya Enablement Services (AES)

Answer: A,BExplanation:


When using the Avaya Site Administrator GEDI interface, which command would be used toconfirm the media gateway number 3 is registered?A. Show media-gateway 3B. Display media-gateway 3C. Print media-gateway 3D. View media-gateway 3



For Avaya Aura CN6.0, how is the license file installed on the server?A. By accessing the web interface of CMB. Using the load license command through shell prompt of CMC. Through the web interface of DOM0D. Using the web interface of Console Domain



Concerning the type of integration with communication manager, on the navigation pane, where usthe communication manager messaging 6.0 application mentioned or configured?A. Click the system wide Messaging parameters, than switch integration type field.B. Click the switch link administration, and then switch type.C. Click integration typeD. Click Switch link administration, then switch link admin, and then switch integration type field



A small enterprise customer needs 450 SIP /H.323 users.Which CM 6.0 template will be the most economical solution?A. CM_SimplexB. CM_survRemote_EmbededC. CM_DuplexD. CM_onlyEmbeded



For the Duplex S8800 servers running CM 6.0, by default which Ethernet port communication withIPSts?

A. Eth0B. Eth1C. Eth2D. Eth3



When configuring the G450 Media gateway using the Gateway CLI interfaces which commandwould be used to view the serial number and software status?A. Show serial numberB. Show systemC. Print G450D. Show G450



Which three elements are needed to CLAN IP interface? (Choose three)A. Network regionB. Gateway node nameC. Node nameD. Duplicate node nameE. link

Answer: A,C,EExplanation:


Which three procedures are used to determine whether a gateway with a survivable remote serverhas lost its H.248 link (connection) to the main (Primary) servers? (Choose three)A. Execute the communication manager command display alarms, to set whether the link lossdelay timer has expired.B. Execute the communication manager command display alarms, to see whether the no servicetimeout timer (NSTT) has expired.C. Execute the SAT command list media-gateway from the remote

survivable server, to determinewhether media gateway is registered to the survivable server.D. Execute the SAT command list media-gateway to determine which media gateways are notregistered to the main server.E. Execute the command status H.248 link from the remote gateway, to determine whether the linkto the main server is active.



A user at a remote branch location is registered to a G450 media Gateway connected viaprocessor Ethernet (PE) to a main communication manager in the core. The report that they areno longer able to place calls to users at the coreWhich three procedures can be used to diagnose the source of problem? (Choose three)A. Confirm that the registered field on the communication Manager Display media-gateway to Y.B. Conform that the PE interface is active by executing the communication manager displayprocessor Ethernet command and confirm that the allow H.248 Gateway field is set to Y.C. Use the show MGC command on the media gateway to confirm the IP address of the PEenabled server at the core is administered as the primary controller of the media gateway.D. Use the list registered �IP-station command on the communication manager to determinewhether the user on the media gateway is registered.E. Use the list survivable processor command to confirm that the survivable server is registered tothe main communication manager.

Answer: A,D,EExplanation:


How is the status of virtual machines (eg.DOM-0, CDOM-0, CM 6.0) on S8800 server checked?A. By going to the home page of console domain.B. By going to the homepage of Avaya communication manager.C. By going to the home page of Dom 0D. By using the internet explorer http://Cdom .lpaddr/vm



Which circuit pack provides an IP Server interface in an Avaya G650 Gateway?A. TN2312BPB. TN2342AcC. MM711D. MM714



A technician is asked to retrieve a maintenance log for CMM that shows the information for 8�00AM to 5:00 PM local tome that day.Which shell command should be executed to retrieve the maintenance log?A. Show main log 0800 101010B. Displog-1 maint �d 10/10/10 08:00C. Print log for maint 101010 08:00D. Print-1 maint �d 08:00 10/10/10



Which MAC address is recommended for the license file?A. The MAC address of the Console domainB. The MAC address of the CM eth0 portC. The MAC address of the CM host nameD. The MAC address of the DOM0


Previous Question Question 50 / 69 Next

Question

A newly installed main Cm 6.0 server indicates it is in license error mode. A technician again 45minutes later and it is still in error mode. The license was installed from the system managementinterface (SMI)?Which statement describes the reason for the error mode?A. The installer used the wrong interface to install the license and it is therefore not installed.B. The server cannot communicate with the IPSI or media gateway whose serial number wasused in the license file.C. The license audit runs every 60 minutes and the error will be resolved in 15 minutes.D. The installer loaded a license for one of the survivable servers, not the main server, and theIPSIs, media Gateways, and/or IP phones have registered to it



The backup communication Manager, what two choices does the customer have? (Choose two)A. Backup/restoreB. Backup nowC. Schedule backupD. Backup/restore later



A user at extension 1111 complaints that when dialing extension 2222, the call is the call isunexpectedly answered by a person at extension 3333. All other calls made are connected asexpected. There is not display on the phone. While at the SAT, the technician has the user repeatthe call to extension 2222Which command identifies the reason this phone call is behaving in the expected way?A. List trace station 1111B. List trace station 3333C. Status station 1111D. Display station 3333



Which greeting should be received when you are calling the messaging Hunt group?A. Welcome to AudixB. Welcome to messagingC. Your call is being answered by AudixD. Please leave a message after the tone



What two pieces of information does the product licensing and delivery system (PLDS) required tobe entered for a license file to be generated? (Choose two)A. Serial numberB. License activation codeC. MAC addressD. Platform type



Which statement describes the action to assure the CM_Simplex Template was installedcorrectly?A. From browser logged into Systen Management Console, verify cm and utility_Server appearand application state is running.B. From a browser using the communication Manager IP address, successfullylog into thecommunication manager system management interface (SMI)C. When monitoring the template installation workflow status, verify the message, �Wizardcompletely successfully� displays.D. From a browser logged into communication manager, select administration > server(maintenance)> server>process status, click on view and verify communicaMgr appears.

Answer: A

Explanation:


A customer has selected Avaya Aura CM_survremote_embedded template.Which Avaya server should be used?A. S8730 Server 8Gb RAMB. S8800 ServerC. S8510Server with 8GB RAMD. S8300D Server



Which two statements regarding shuffling and hairpining are true? (Choose two)A. Hairpining does not use media processor resources.B. The audio connection type field on the communication manager status station formation can beused to determine whether a call is shuffled.C. A call between a DCP endpoint and H.323 end point can be shuffled.D. Shuffling release media processor resources.



Which Avaya G450 Module provides 8 DCP ports?A. MM711B. MM712C. MM7202D. TN2224



A network failure prevents communication between all the port networks (IPSIs) and there mainCM servers.What is the maximum number of port networks (IPSIs) that can be

registered to a survivableremote embedded server?A. no port networkB. 63 port networksC. 64 port networksD. 126 port networks



Which three servers can be upgraded to communication manager Release 6.0? (Choose three)A. S8300CB. S8300DC. S8510D. S8800

Answer: B,C,DExplanation:


A customer has a communication Manager R6.0 system with IP phones and some older TDMphone, and says there is no dial tone for all of the IP phones. All of the hardware has been verifiedto be working properly.Which two steps can be taken to identify the cause of problem? (Choose two)]A. Verify that the TN2602 Media resources circuit pack has the correct IP settings.B. Verify that the processor Ethernet mode is enabled in the Server.C. Set a static IP address on a laptop and see if the server can be pinedD. Set a static IP address on a laptop and see if the TN2602 Media Resource circuit pack can bepinged.

Answer: A,DExplanation:


To ensure the communication manager messaging application is working,

what are three tests thatcan be performed? (Choose three)A. Call one of the two stations that you set as subscriber to the messaging server, and let the callgo to coverageB. Leave message on a covered call and verify that the message waiting indicator (MWI) lamp onthe receiving extension is lit.C. Call the station and after the call is answered leave a message.D. Call the messaging hunt group from any of the stations to ensure it is answering.E. Log into communication manager messaging to verify CDOM is running.

Answer: A,B,DExplanation:


Which statement describes how the communication message application is enabled the first timeafter the installation?A. Connect the SAT terminal login using the craft, and then enable using the enable messagingcommand.B. Open the communication manager IP address using web browser. Login as craft, clickinstallation, than communication manager messaging.C. Open the communication manager IP address using web browser. Login as craft; clickAdministration, then server (maintenance), than click miscellaneous, than messaging software,and than click enable.D. Communication manager messaging is enabled by default after the installation.



Through which protocols can integration of communication manager messaging application 6.0with communication manager occur?(Choose two)A. H.323/Q. Sig protocolB. RTP protocolC. SSP protocolD. SIP protocol



Which statement describes how the communication message application is enabled the first timeafter the installation?A. Connect the SAT terminal login using the craft, and then enable using the enable messagingcommand.B. Open the communication manager IP address using web browser. Login as craft, clickinstallation, than communication manager messaging.C. Open the communication manager IP address using web browser. Login as craft; clickAdministration, then server (maintenance), than click miscellaneous, than messaging software,and than click enable.D. Communication manager messaging is enabled by default after the installation.



Through which protocols can integration of communication manager messaging application 6.0with communication manager occur?(Choose two)A. H.323/Q. Sig protocolB. RTP protocolC. SSP protocolD. SIP protocol



An administrator has just installed a 9620 IP Phones on an existing system. The command changeIP network-map is use to administer the phone into to network region 100. All other phones are in

network region 1. Like all other 9620 phones on this system, this one successfully gets IP addressinformation fro, the one DHCP server. However, the new phone fails to register with CM.Which two statements describe the cause of the problem? (Choose two)A. Neither PROCR nor CLANs were administered in network region 100B. There are no Medpros or H.248 Media Gateways administered in network region 100C. Network region 100 is not configured to communicate with other network reginsD. On the IP interface form, some one recently set the field �Allow H.323 registration� to �n�



Which statement describes how the licensed mailboxes are enabled on a communication managermessaging application 6.0?A. Mailboxes are enabled in the communication manager 6.0 license file.B. Mailboxes are enabled by a separate license that needs to be generated anddeployed.C. Mailboxes are enabled by default.D. Mailboxes are enabled in the system Parameter features form.



On a media gateway G450, into which Slot does the S8300 D server blade need to be inserted?A. V1B. V2C. V4D. V8



Which two hardware components support CM_survRemote template? (Choose two)A. S8730 Servers with 8 GB RAMB. S8800 ServersC. S8510 Server with 8 GB RAMD. S8300D Server



In which two modes is communication manager Release 6.0 deployed? (Choose two)A. Feature serverB. Signaling serverC. Evolution serverD. System management

Users Answers, Comments and Explanations

gjhbj Says : published on : (4/26/2012 9:52:47 AM)

A,C