Bio-Data
NAME : Dr. K.Dilip Kumar
DESIGNATION : Professor
AREAS OF RESEARCH : Thermal Engineering
EMAIL : [email protected]
PHONE : 9703169479
DATE OF JOINING : 26/09/2011
DATE OF BIRTH : 26/10/1984
Educational Qualifications: B.Tech. MBA. M.Tech., Ph.D.
Degree Branch/Specialization College University Year of Admission
Year of Pass
% of marks
UG Mechanical / Mechanical
Engineering
JNTU H JNTUH 2002 2006 68%
PG Mechanical / Heat Power
(R&AC) JNTUA
Ananthapur
JNTUA 2006 2008 80%
PG Faculty of commerce and
management studies/
H.R.M
Andhra
University
AU 2009 2011 59.4%
PhD Mechanical/ Heat
transfer
JNTUA Ananthapur
JNTUA 2010
2014 Awarded
Experience Summary: Teaching: 11.6 Years Industry: Nil Research: 8 Total: 11.6 Yrs
S.No. College University Post held Duration Ratified
(Y/N) Date of
Ratification Exp. in yrs From To
1 LBRCE JNTUK
Professor 1-12-
2018
Till
Date
COURSES HANDLED: Thermodynamics, Fluid Mechanics, Thermal Engineering, Advanced Fluid Mechanics, Advanced Heat & Mass Transfer, Refrigeration & Air –conditioning, Renewable energy Technology, Non-Conventional Energy Sources, Hydraulic Machines, Engineering Drawing, Computational Fluid Dynamics, Automobile Engineering.
PROFESSIONAL ACTIVITIES:
PUBLICATIONS:
A) Journals:
1) K.Dilip Kumar,Dr.B.Uma maheswar Gowd, “ State of Art to Reduce the Effect of Clustering
in Graphene Nano Fluids” International Journal Of Nano Science & Nano Technology ISSN
0974-3081, Vol -4,PP-41-52.(Scopus)
2) K.Dilip Kumar,Dr.B.Uma maheswar Gowd, “ Effects of Thermal Convection of Nano
particles in Graphene Nano fluid Due to Brownian Motion” International Journal Of Nano
Technology And Its Applications ISSN 0973-631 X Vol 6,(2012)pp 127-138.(Scopus)
3) K.Dilip Kumar,Dr.B.Uma maheswar Gowd, “Convective Heat Transfer
Characteristics Of Graphene Dispersed Nano fluids” International Journal of
Mechanical Engineering & Robotic Research ISSN 2278-0149,Vol.1
4) K.Dilip Kumar,P.Ravindra Kumar,” Experimental Investigation on Cotton seed oil and Neem
Methyl Ester as Bio Diesel on Ci Engine” International Journal Of Modern Engineering
Research ISSN 2249-6645,Vol2(2012).PP 1741-1746.
5) Dr.K.Dilip Kumar,Dr.B.Uma maheswar Gowd,Dr.K.Appa Rao, “ Enhancement of
2 LBRCE JNTUK Associate Professor
6-10-14 30-11-
2018 Yes 26-08-2017 4 Years 1
month
3
LBRCE
JNTUK Asst.Professor 26-09-11
05-10-14 Yes 24-01-2013 3 Years
1 month
4 SMCE
(Sri Mitta
palli
College
of Engg)
JNTUK Asst.Professor
09-09-07 23-09-11
4 Years
Mixing Using Delta Tab” International Journal of Fluids Engineering, ISSN 0974-3138
Volume 7, 1(2015) pp1-12.
6) Dr.K.Dilip Kumar,B.Sudheer Kumar, “ Effect of Mechanical Properties on Polyester Typha
Fiber in Composition of Wood powder and coconut shell ash” International Journal of
Engineering Technology Science and Research. ISSN 2394-3386, Col 2.
7) Dr.K.Dilip Kumar,Dr.P.Vijay Kumar, “Evaluation of Performance and Emission Characteristics
of Flax Oil Ethyl Ester With Ignition Improver on Diesel Engine and Comparison With
Jatropha” International Journal of Mechanics and Thermodynamics. ISSN 2278-361X, Vol
6,1(2015), pp.1-10.
8) Dr.K.Dilip Kumar,Dr.P.Vijay Kumar,” Simulation and CFD Analysis of Heat pipe with Different
Wick Geometry using CFX” International Journal of Thermal Technologies. ISSN 2277-4114,
Vol.5, No 3(2015).
9) Dr.K.Dilip Kumar,Dr.P.Vijay Kumar, “ Thermodynamic Analysis on Gas Turbine Unit”
International Journal for Innovative Research in Science & Technology, ISSN 2349-
6010.Vol 2, July (2015).
10) Dr.K.Dilip Kumar, Dr.K.Appa Rao, “Experimental Investigation on Diesel Engine Using
Mahua Ethyl Esters” International Journal for Research in Science Engineering and
Technology. ISSN 2394-739X, Vol 2, pp. 18-23.
11) K.Dilip Kumar, P.Vijay Kumar, “Experimental Investigation on Cylindrical Parabolic trough
Collector with Water-Ethylene Glycol at various Proportions” International Journal of
Thermal Technologies, ISSN 2277-4114,Vol 6.
12) K.Dilip Kumar, “An Experimental Investigation on Application of AL2O3 Nanoparticles as
Lubricant Additive in VCR System” International Journal of Engineering Research and
Applications, ISSN:2248-9622,Vol 6,pp:32-38.
13) K.Dilip Kumar, P.Vijay Kumar, “ Investigation on Performance Parameters of Vapour
Compression Refrigeration System by Incorporating Phase Change Materials” International
Journal of Advanced Mechanical Engineering, ISSN: 2250-3234, Vol 6,pp17-26.
14) K.Dilip Kumar, K.Appa Rao, “Comparision of Fluid Flow and Thermal Characteristics of Plate-
Fin and Square Pin-Fin Heat Sink Subjected to Parallel Flow” International Journal of
Innovative Research in Technology, ISSN: 2349-6002, Vol 3,
15) K.Dilip Kumar, S.Pichi Reddy, “ Effect of Copper Nano Particles on Banana Fiber Reinforced
Polyster Composites” Journal of Manufacturing Engineering, Vol 12: Issue 1.
16) K.DilipKumar, Sk.Nayeem, “CFD Analysis and Experimental Investigation on Ranque-
Hilsch Counter Flow Vortex Tube for Optimizing Tube Length by Using Compressed Air”
International Journal of Mechanical Dynamics and Analysis, Vol. 3: Issue 2.
17) K.DilipKumar, M.Ravikiran. “Performance Enhancement of Vapour Compression
Refrigeration System by Using Solar Thermoelectric Sub-Cooler” Journal of
Refrigeration, Air Conditioning, Heating and Ventilation ISSN: 2394-1952 (Online)
Volume 4, Issue 2.
18) K.DilipKumar, Sk.Nayeem, “performance analysis of vortex tube Refrigerator” International Journal for research in science research in technology,ISSN: 2394-739X,Vol-4,Issue-7.
19) K.DilipKumar,K.Narayana,K.Appa Rao.“ Green Synthesis of Zinc Oxide Nanoparticles using
Extracts of Ocimum Tenuiflorum and its Characterization” Journal of Nanoscience,
Nanoengineering & Applications ISSN: 2231-1777 (Online), ISSN: 2321-5194 (Print) Volume 8,
Issue 1.
20) K.DilipKumar,G.V.V.Prasad, “Performance Analysis Of VCR system By Applying Magnetic
Field To Liquid Line Using R134a Refrigerant” International Journal for Science and Advance
Research in Technology (IJSART) ,ISSN [ONLINE]: 2395-1052 Volume 3 Issue 8.
21) K.DilipKumar,M.Ravikiran. “Performance Enhancement of R-134a Refrigeration Cycle by
Using Solar Peltier Subcooler” International Journal of Thermal Energy and Applications Vol.
3: Issue 2.
22) K.DilipKumar,K.Anji Reddy, “ An Experimental Study On Active Solar Still Connected With
Evacuated Tubes And Reflector” International journal of scientific Research and Review, ISSN
NO: 2279-543X,Volume 7, Issue-6.
23) K.DilipKumar, A.Pratyush, “ Performance Analysis of Vapour compression Refrigeration
system by inserting twisted strip in condenser along with liquid suction heat
exchanger”International Journal For Research In Engineering Application & Management, Issn:
2454-9150,Vol-4,Issue-3.
24) K.DilipKumar,G.V.V.Prasad, “Procuring Magnetic Field to Liquid Channel of Nano
Lubricant (CuO& PAG Oil) Rigged VCR System by Using R134a Refrigerant” Materials
Today: Proceedings 5 (2018) 20518–20527.(Scopus)
B) Conferences:
1) K.Dilip Kumar, T.Srinivasa Rao, “ Refrigeration System Performance By Inserting Twisted Strip In Condenser A long With Liquid Suction Heat Exchanger” ICRACMEP-18
2) Books / Chapters Published:
SPONSORED RESEARCH:
CERTIFICATION COURSES:
1) Got certified from NPTEL online certification course (8 Weeks) on “ENERGY CONSERVATION & WASTE HEAT RECOVERY" conducted by IIT Madras in the year 2018.
WORKSHOPS/FDPS ATTENDED:
Attended Three Day FDP on” outcome based pedagogic principles of effective teaching”
sponsored by Ministry of HRD., Govt of India 2018.
Attended one week FDP on “Organization Behavior “ on ICT MODE Organized by NITTTR
Ministry of HRD., Govt of India “du ring 12/11/18 to16/11/18,2018 at LBRCE Mylavaram
Attended one week AICTE Sponsored FDP on “Research Methodology ,Design and Analysis
of Experiments “Organized by RVR &JC College of Engineering“during 12/10/18 to17/10/18,
2018.
Attended one week AICTE Sponsored FDP on “Computational Fluid Dynamics “Organized by
Gudlavalleru College of Engineering“during 18/6/18 to23/6/18, 2018.
Attended 5 Day FDP on “Advances in Mechanical Engineering” during 23/10/17-27/10/17,
2017 at VVIT, Guntur.
Attended 5 Day FDP on “Computational Fluid Dynamics Using ANSYS” during 07/8/17-
11/8/17, 2017 at LBRCE,Mylavaram.
Attended 3 Day FDP on Fundamentals of Structural Analysis during 7/11/16-9/11/16, 2013
at LBRCE Mylavaram.
Attended 3 Day FDP on” Fundamentals of Engineering Mechanics” during 9/11/15-
11/11/15, 2015 at LBRCE Mylavaram.
II. Attended 5 Day AICTE Sponsored FDP on “Computational Fluid Dynamics ” during
23/11/15-27/11/15, 2015 at IIT Madras.
Attended One week FDP on Recent Trends in manufacturing process during 17/3/14-
23/3/14, 2014 at LBRCE Mylavaram.
Attended One week FDP on Recent Advances in Mechanical Engineering “during 26/12/14-
30/12/14, 2014 at LBRCE Mylavaram.
Attended 3 day FDP on “Engineering drawing using Auto CAD “during 13/11/14-15/11/14,
2014 at LBRCE Mylavaram.
Attended One week FDP on “finite element analysis and practices on through ANSYS
during 04/02/13 -10/02/13, 2013 at LBRCE Mylavaram.
WORKSHOPS / FDPS / STTPS / TRAINING PROGRAMS ORGANIZED:
PROJECTS SUPERVISED: M.Tech : 15
B.Tech : 16 MEMBERSHIPS: MISTE, MIE.
ADVISORY AND ADMINISTRATIVE ROLES:
1. Department Exam Cell incharge from 25-05-2012 to till date. 2. Member in BoS, DAC, & PAC (Since 2014). 3. Department R&D Cell incharge (Since 2014). 4. FM &HM Lab Incharge (Since 2012).