Light to Medium DutyMedium to Heavy DutyDIY (Personal Use Only)
2
SpecificationRated Voltage (V) DC 24V
No Load Speed (rpm) 2000
Impact (bpm) 2600
Max. Torque (N.m) 450
Packing Size (mm) 340 x 295 x 110
Weight (kgs) 4
Order No. Type Description
KW0701230 KW07-1230 Cordless Impact Wrench 1/2”
Order No. Type Description
KW0701231 KW07-1231 Cordless Drill 10mm
SpecificationMax Drilling Diameter Steel (mm) 10
Rated Voltage (V) DC 18V
No Load Speed (rpm) 0-550
Torque (N.m) 16
Packing Size (mm) 270 x 265 x 90
Weight (kgs) 4
Order No. Type Description
KW0701232 KW07-1232 Cordless Impact Drill 10mm
SpecificationMax Drilling Diameter Steel (mm) 10
Max Drilling Diameter Masonry (mm) 10
Rated Voltage (V) DC 18V
No Load Speed (rpm) 0-400/1150
Impact (bpm) 0-6400/18400
Torque (N.m) 16
Packing Size (mm) 270 x 265 x 90
Weight (kgs) 4
Spesification KW07-1602 KW07-1603
Head of Screwdriver (mm) 6.35
Rated Voltage (V) DC 3.6V
No Load Speed (rpm) 0 – 200
Weight (kgs) 0.43
Spesification KW07-1605 KW07-1606Max Drilling Diameter Steel (mm) 10 10Rated Voltage (V) DC 10.8 V DC 14.4 V
No Load Speed (rpm) 0 – 300 ( Low ) / 0 – 1050 ( High ) 0 – 700
Torque (N.m) 18 28Weight (kgs) 0.95 1.34
Order No. Type Description
KW0701602 KW07-1602 Cordless Screwdriver 3.6V Lithium - Ion Battery w/ Pouch
KW0701603 KW07-1603 Cordless Screwdriver 3.6V Lithium - Ion Battery w/ BMC
Order No. Type Description
KW0701605 KW07-1605 Cordless Drill 10.8V 2 Speed Lithium - Ion Battery 10mm
KW0701606 KW07-1606 Cordless Drill 14.4V Lithium - Ion Battery 10mm
KW07-1606 KW07-1605
Li-ion Tech.
CORDLESS
3
Light to Medium DutyMedium to Heavy DutyDIY (Personal Use Only)
Specification
Max. Drilling Diameter Steel (mm) 10
No Load Speed (rpm) 0 ~ 2900
Rated Input Power (W) 400
Rated Voltage (V) 220
Frequency (Hz) 50
Specification KW07-1000 KW07-1002Max. Drilling In Steel (mm) 13 13Max. Drilling In Concrete (mm) 13 16Max. Drilling In Wood (mm) 25 30No Load Speed (rpm) 0 ~ 3000 0 ~ 100 / 0 ~ 3000Rated Input Power (W) 650 950Rated Voltage (V) 220 220Frequency (Hz) 50 50
Order No. Type DescriptionKW0701000 KW07-1000 Impact Drill 13mm, 650WKW0701002 KW07-1002 Impact Drill 13mm, 950W
Specification KW07-26
Drill Capacity (mm) Steel Ø10, Concrete Ø13,Wood Ø20
Power (W) 450Voltage (V/Hz) 220/50
No Load Speed (rpm) 0 ~ 2500
Weight (kg) 1.9
Order No. Type Description
KW0700026 KW07-26 Impact Drill Set 13mm, 450W (21pcs)
13mm/450W
SET of 21pcs
Content:•1pc ImpactDrill•5pcs MasonryDrills•9pcs TwistDrills•5pcs GrindingStones•1pc Case
KW07-1002
KW07-1000
Specification KW07-1009 KW07-1008
Max. Drilling In Steel (mm) 13 13
Max. Drilling In Concrete (mm) 22 20
Max. Drilling In Wood (mm) 24 24
No Load Speed (rpm) 0 ~ 800/ 0 ~ 1800 0-800
Impact Rate (bpm) 0 ~ 4300 0-4300
Rated Input Power (W) 600 600
Rated Voltage (Hz) 220 220
Frequency (Hz) 50 50
Order No. Type Description
KW0701009 KW07-1009 Rotary Hammer Drill 22mm, 600W
KW0701008 KW07-1008 Rotary Hammer Drill 20mm, 600W
Order No. Type Description
KW0701001 KW07-1001 Electric Drill 10mm, 400W
KW07-1009
KW07-1008
IMPACT DRILL
ELECTRIC DRILL
ROTARY HAMMER DRILL
Light to Medium DutyMedium to Heavy DutyDIY (Personal Use Only)
4
DIAMOND CORE DRILL
SpecificationMax Drilling (mm) Ø230Rated Voltage (V) 220Rate Frequency (Hz) 50 ~ 60Rated Input Power (W) 2500No-Load Speed 720Package Size (cm) L x W x H 93 x 34 x 22Weight (kg) 21.2Thread Male 1/2”
SpecificationMax Drilling (mm) Ø80Rated Voltage (V) 220Rate Frequency (Hz) 50 ~ 60Rated Input Power (W) 1150No-Load Speed (rpm) 0 ~ 1800
Package Size (cm) 57 x 36.5 x 29
Weight (kg) 5.75Thread Male 1/2”
Order No. Type DescriptionKW0700756 KW07-756 Diamond Core Drill 80mm
Order No. Type Description
KW0700757 KW07-757 Diamond Core Drill with New Stand 230mm
Note : Unit not include Diamond Core Bit
Order No. Type Description ThreadKW0200922 KW02-922 Diamond Core Bits 26 ~ 400mm Female 1/2”KW0200923 KW02-923 Diamond Core Bits 50 ~ 400mm Female 1/2”KW0200924 KW02-924 Diamond Core Bits 76 ~ 400mm Female 1/2”KW0200925 KW02-925 Diamond Core Bits 102 ~ 400mm Female 1/2”KW0200926 KW02-926 Diamond Core Bits 152 ~ 400mm Female 1/2”KW0200927 KW02-927 Diamond Core Bits 202 ~ 400mm Female 1/2”
Order No. Type Description Thread
KW0200603 KW02-603 Core Drill Bit Set (11pcs) Female 1/2”
KW0200921 KW02-921 Core Drill Adapter Drill Adapter Male G1/2”Female
1.1/4”-7
OPTIONAL ACCESSORIES
Complete with Power SupplyType Input Voltage (AC) Output Voltage (DCV) Volume (mm) Weight (gr) Loading Current (A)
Safety Laws And Regulation Approval
PRO-6 100~240 20~30 150 x 65 x 40 500 Max.6.5
Type Input Voltage Torque Force Range Unload Rev Applicable Head of Screwdriver
Applicable Thread Dia. of Screw (mm)(DCV) (kgf.cm) (rpm) +10% Machine Thread Self Tapping Thread
KW07-1241 20 ~ 30 2.0 ~ 12 700 ~ 1000 Ø5, SH1/4 2.0 ~ 3.0 1.8 ~ 2.6KW07-1242 20 ~ 30 4.0 ~ 20 700 ~ 1000 Ø5, SH1/4 2.4 ~ 4.0 2.0 ~ 3.0
ESD Electrostatic DischargeOrder No. Type Description
KW0701241 KW07-1241 Electric Screwdriver 2-12kgf.cm w/ESDPushdownType
KW0701242 KW07-1242 Electric Screwdriver 4-20kgf.cm w/ESDPushdownType
Order No. Type DescriptionKW0701243 KW07-1243 ElectricScrewdriver1.0-6.0kgf.cmw/ESDLeverType
KW0701244 KW07-1244 Electric Screwdriver 1.5-10kgf.cm w/ESDLeverType
Type Input Voltage Torque Force Range Unload Rev Applicable Head of
ScrewdriverApplicable Thread Dia. of Screw (mm)
(DCV) (kgf.cm) (rpm) +10% Machine Thread Self Tapping ThreadKW07-1243 20 ~ 30 1.0 ~ 6.0 700 ~ 1000 Ø4, Ø5, SH1/4 1.4 ~ 2.6 1.4 ~ 2.2KW07-1244 20 ~ 30 1.5 ~ 10 700 ~ 1000 Ø4, Ø5, SH1/4 2.2 ~ 3.0 2.0 ~ 2.5
ESD Electrostatic Discharge
Complete with Power Supply
Type Input Voltage (AC) Output Voltage (DCV) Volume (mm) Weight (gr) Loading Current (A) Safety Laws And
Regulation ApprovalPRO-3 100~240 20~30 150 x 65 x 40 350 Max.4.5
ELECTRIC SCREWDRIVER
5
Light to Medium DutyMedium to Heavy DutyDIY (Personal Use Only)
TypeInput Voltage Torque Force Range Unload Rev Applicable Head of
ScrewdriverApplicable Thread Dia. of Screw (mm)
(DCV) (kgf.cm) (rpm) +10% Machine Thread Self Tapping Thread
KW07-1240 30 2.0 ~ 16 950 Ø5, SH5 3.5 ~ 5.5 2.6 ~ 4.50
KW07-1239 30 5.0 ~ 25 750 Ø5, SH5 4.0 ~ 6.0 3.0 ~ 5.0
Complete with Power Supply
Type Input Voltage (AC)
Output Voltage (DCV) Volume (mm) Weight (gr) Loading Current
(A)Safety Laws And
Regulation Approval
PRO-3N 100~240 30 110x65x32 350 Max.2.5
Order No. Type DescriptionKW0701240 KW07-1240 Electric Screwdriver 2-16kgf.cmKW0701239 KW07-1239 Electric Screwdriver 5-25kgf.cm
Order No. Type Description
KW0701236 KW07-1236 Spring Balancer 1-2kg / 2m
Features:• Hanging screwdriver, convenient for operation• Applicable to full series of electric and pneumatic screwdriver
ACCESSORIES
SpecificationCollet Diameter (inch/mm) 1/4”/8
No Load Speed (rpm) 28000
Rated Input Power (W) 1200
Rated Voltage (V) 220
Frequency (Hz) 50
Order No. Type DescriptionKW0701010 KW07-1010 Router 1/4”; 1,200W
SpecificationMax. Planing Width (mm) 82
Max. Planing Depth (mm) 3
No Load Speed (rpm) 16000Rated Input Power (W) 900
Rated Voltage (V) 220
Frequency (Hz) 50
Order No. Type DescriptionKW0701006 KW07-1006 Planner 82 x 3mm, 900W
Specification KW07-1036 KW07-1037Collect Chuck Diameter (mm) 1.5, 2.5, 3
Rated Voltage (V) 230 230
Frequency (Hz) 50 50
Rated Input Power (W) 130 130
No Load Speed (rpm) 8000 ~ 30000 8000 ~ 30000
KW07-1036KW07-1037
Order No. Type Description
KW0701036 KW07-1036 MiniGrinderw/Accessories227pcs
KW0701037 KW07-1037 MiniGrinderw/Accessories172pcs
KW0701038 KW07-1038 RotaryToolSet
KW0701039 KW07-1039 RotaryToolSet
ACCESSORIES
KW07-1038 KW07-1039
Include :Flexible Shaft
KW07-1236
ELECTRIC SCREWDRIVER
ROUTER PLANNER
MINI GRINDER
Light to Medium DutyMedium to Heavy DutyDIY (Personal Use Only)
6
SpecificationVoltage/Frequency (V/Hz) 220/50
Rate Input Power (W) 250
Max Speed (rpm) 24000
Stepless Variable Speed Range (rpm) 500 ~ 22000
Max Chuck (mm) 4
Features:•Heavydutymotor•Quietmotoronly75db•Lowvibrationhandpiece•Approvedcertification(CE,RoHs)
Order No. Type DescriptionKW0700968 KW07-968 Hand Piece Capacity 6mm, 3mm, 2.38mmKW0700969 KW07-969 Hand Piece Capacity 3mm, 2.38mmKW0700974 KW07-974 Hand Piece Capacity 4mm (Drill Chuck Model)
KW07-968 KW07-969 KW07-974
Optional
Order No. Type DescriptionKW0700942 KW07-942 ProfessionalHangingFlexibleShaftGrinder
Features:KRISBOW bench grinder equips with powerful induction motors ensure smooth running, and provide plenty of power to avoid stalling. Fully sealed ball bearing support motor shaft for exceptional long wear. Large adjustable eye shields for users safety. High quality rocker switch ensure years of operation. Adjustable work rest make proper wheel wear compensation. Patent aluminium motor housing cap design with cast iron base ensure steady running. Fully balanced wheels to ensure least wheel run out and tool vibration. Wheel dresser, coolant, tray, are available and working lamp.
Order No. KW070-73 KW07-74 KW07-75Wheel Size (inch) Ø6 x 1 Ø8 x 3/4 Ø10 x 1Motor (HP) 1/2 3/4 1Speed (rpm) 2850Voltage (V) 220 220 220Shaft Dia. (inch) 1/2” 5/8 3/4Lamp Yes Yes YesWheel Dressing Tool Yes Yes YesCast Iron Base No Yes YesCoolant Tray Yes Yes Yes
Order No. Type DescriptionKW0700073 KW07-73 BenchGrinder6”KW0700074 KW07-74 BenchGrinder8”KW0700075 KW07-75 BenchGrinder10”KW0700076 KW07-76 StandforGrinder
KW07-76
Order No. KW070-940 KW07-939Wheel Size (mm) Ø200 x 14 x Ø15.9 Ø75 x 13 x Ø12.7Rated Input Power (W) 375 75Rated Voltage (V) 220No Load Speed (rpm) 2850Frequency (Hz) 50
Order No. Type DescriptionKW0700940 KW07-940 BenchGrinderw/LongShaftKW0700939 KW07-939 BenchGrinderw/FlexibleShaft
10”
KW07-75
8”
KW07-74
6”
KW07-73
KW07-939
KW07-940
FLEXIBLE SHAFT GRINDER
BENCH GRINDER
7
Light to Medium DutyMedium to Heavy DutyDIY (Personal Use Only)
Specification KW07-863 KW07-866Max. Wheel Diameter (mm) 100 180
Hole Diameter of Wheel (mm) 16 22
No Load Speed (rpm) 13000 8300
Rated Input Power (W) 570 2200
Rated Voltage (V) 220 220
Frequency (Hz) 50 50
Order No. Type DescriptionKW0700863 KW07-863 AngleGrinder100mm,570WKW0700866 KW07-866 AngleGrinder180mm,2200W
KW07-863
4”
ANGLE GRINDER
SpecificationCollet Bore of Collet Chuck (mm) 6No load speed (rpm) 27000Rated Input Power (W) 400Rated Voltage (V) 220Frequency (Hz) 50
Order No. Type Description
KW0700845 KW07-845 DieGrinder6mm,400W
Specification KW07-1003 KW07-1004 KW07-1005Blade Diameter (mm) Ø 210 Ø 255 Ø 255
Max. Cutting Capacity (mm)
0°x90°H65xW205 0°x90°H75xW300 0°x90°H70xW11045°x90°H65xW145 45°x90°H75xW210 45°x90°H70xW700°x45°H35xW205 0°x45°H40xW300 0°x45°H40xW11045°x45°H35xW145 45°x45°H40xW210 45°(L)x45°H35xW60
- - 45°(R)x45°H40xW90No Load Speed (rpm) 4800 4800 5000Rated Input Power (W) 1600 1800 1800Rated Voltage (Hz) 220 220 220Frequency (V) 50 50 50
KW07-1003KW07-1004
KW07-1005
SpecificationMax. Wheel Diameter (mm) 125
Hole Diameter Of Wheel (mm) 20
Rated Speed (rpm) 5300
Rated Input Power (W) 710
Rated Voltage (V) 220
Frequency (V) 50
Order No. Type Description
KW0700856 KW07-856 StraightGrinder125mm,710W
Order No. Type DescriptionKW0701003 KW07-1003 Miter Saw Ø 210, 1600W with Laser LightKW0701004 KW07-1004 Miter Saw Ø 255, 1800W with Laser LightKW0701005 KW07-1005 2 Function Miter Saw Ø 255, 1800W
IncludingAccessoryKW03-277:
IncludingAccessoryKW03-274:
KW07-866
7”
DIE GRINDER
STRAIGHT GRINDER
MITER SAW
Light to Medium DutyMedium to Heavy DutyDIY (Personal Use Only)
8
Features:•1500W motor•4800rpm•Laser light generates an exact straight line allowing moreaccuratecutsandsuperiorfinishes
•Soft-grip D-handle for great comfort•Cushioned wrap-around front handle for maximum
control and comfort•Convenient, oversized bevel and depth contol
levers easy to access and operate•45o bevel capacity, cuts 63mm at 90o and 43mm at 45o •Spindle lock for quick blade changes•Leightweight, durable alumunium alloy base plate
Features:• 1200Wmotor• Soft-gripD-handleforgreatcomfort• Cushionedwarp-aroundfronthandleformaximum
control and comfort• Convenient,oversizedbevelanddepthcontrollevers,
easy to acces and operate• 45o bevel capacity cuts 55mm at 90o and 34mm at 45o
• Spindlelockforquickbladeschanges• Lightweight,durablealuminiumalloybaseplate
TypeBladeSize(mm)
Power(W)
Voltage(V)
Frequency(Hz)
Max Cutting Depth No Load
Speed(rpm)
Weight(kg)90o 45o
KW07-338 6 1/2”(165) 1200 230 50 55mm 34mm 4700 25
Order No. Type Description
KW0700338 KW07-338 Circular Saw 165mm with Laser Light
165mm
Features:•800Wmotor• 4500rpm• Soft-gripD-handleforgreatcomfort• Cushionedwrap-aroundfronthandleformaximum
control and comfort• Convenient,oversizedbevelanddepthcontrollevers,
easy to access and operate• 45o bevel capacity, cuts 40mm at 90o
and 28mm at 45o • Spindlelockforquickbladechanges• Lightweight,durablealuminiumalloybaseplate
TypeBladeSize(mm)
Power(W)
Voltage(V)
Frequency(Hz)
Max Cutting Depth
No Load Speed(rpm)
Weight(kg)
90o 45o
KW07-337 5 1/2”(140) 800 230 50 40 28 4500 20
140mm
Order No. Type DescriptionKW0700337 KW07-337 Circular Saw 140mm
185mm
TypeBladeSize(mm)
Power(W)
Voltage(V)
Frequency(Hz)
Max Cutting Depth
No Load
Speed(rpm)
Weight(kg)90o 45o
KW07-336 7 ¼” (185) 1500 230 50 63mm 43mm 4800 15
Order No. Type Description
KW0700336 KW07-336 Circular Saw 185mm with Laser Light
Ergonomic front handle for comfortable
use
Laser lining Bevel levers adjustments easy to access and operate
(bevel 45o)
Ergonomic front handle for comfortable use
Laser lining Bevel levers adjustments easy to access and operate
(bevel 45o)
WITH LASER
Specification KW07-999 KW07-855Max. Cutting Depth Wood (mm) 65 85
Max. Cutting Depth Steel (mm) 8 10
No Load Strokes (spm) 500 ~ 3000 500 ~ 3100
Rated Input Power (W) 570 580
Rated Voltage (V) 220
Frequency (Hz) 50Order No. Type Description
KW0700999 KW07-999 Jig Saw 65mm, 570W
KW0700855 KW07-855 Jig Saw 85mm, 580W
WITH LASER
Bevel levers adjustments easy to access
and operate (bevel 45o)
Ergonomic front handle for comfortable use
KW07-855KW07-999
CIRCULAR SAW
JIG SAW
9
Light to Medium DutyMedium to Heavy DutyDIY (Personal Use Only)
Features:•1500W motor•4800rpm•Laser light generates an exact straight line allowing moreaccuratecutsandsuperiorfinishes
•Soft-grip D-handle for great comfort•Cushioned wrap-around front handle for maximum
control and comfort•Convenient, oversized bevel and depth contol
levers easy to access and operate•45o bevel capacity, cuts 63mm at 90o and 43mm at 45o •Spindle lock for quick blade changes•Leightweight, durable alumunium alloy base plate
Features:• 1200Wmotor• Soft-gripD-handleforgreatcomfort• Cushionedwarp-aroundfronthandleformaximum
control and comfort• Convenient,oversizedbevelanddepthcontrollevers,
easy to acces and operate• 45o bevel capacity cuts 55mm at 90o and 34mm at 45o
• Spindlelockforquickbladeschanges• Lightweight,durablealuminiumalloybaseplate
SpecificationVoltage (V/Hz) 230/50
No Load Speed (rpm) 1000 ~ 2200
Power Input (W) 1500
Stroke (mm/inch) 26/1”
Insulation Double Insulation Class II
Dimension (mm) 491 x 94 x 108
Weight (kg) 4.35
Quick-releasepipe vise side of the 2-in-1 vise for smaller diameters
Chain vise side of the 2-in1 for larger diameters
Standard Accessories:•Hexwrench•Reciprocatingsawblade152mmx14T (3pcs/Set) KW07-775
KW07-805
Optional Accessories:•2in1Vise(KW07-805)
Optional:Aworldfirst:a2in1pipevise.onsidethereisaChainClampfor1/2”upto6”pipes.OntheothersideisaQuickReleasepipevise.Forpipecutting, the vise gives 4 times the leverage and a perfect 90o cut
KW07-804 brings togather all the features you need for a rugged, effective reciprocatingsawwithoutthegimmicks.Theorbitalreciprocatingmechanismis specially designed for long term durability and impact resistance. With its pipeviseandstraighthandle,youwillfindtheKW07-804 to be an especially effective pipe cutting saw
Order No. Type Description
KW0700804 KW07-804 ReciprocatingSawStraightTypeHandle
KW0700805 KW07-805 2 in 1 Vise for KW07-804
Order No. Type Description KW0700441 KW07-441 Cut Off Machine 16”, Heavy DutyKW0700850 KW07-850 Cut Off Machine 14”, 2100W
KW0700725 KW07-725 Cut Off Machine 355mm/14” 2300W
400mm/16”Heavy Duty
Specification KW07-850 KW07-725Wheel Size (mm) 355 355
No Load Speed (rpm) 3900 3500
Rated Input Power (W) 2100 2300
Rated Voltage (V) 220 220
Frequency (Hz) 50 50
Weight (kg) 23.5 23.5
Specification KW07-441Blade Diameter (mm) 400 x 3.2 x 32Power (W) 2200Voltage (V) 380Rated Linear Velocity (m/s) 70Spindle Speed (rpm) 2800Angle Range of Jaws 0° ~ 45°Steel Pipe (mm) Ø100 x 6Angle Steel (mm) 100 x 10Channel Steel (mm) 100 x 10Columnar Steel (mm) 50
Dimensions (mm) L x W x H 840 x 460 x 580
Weight (kg) 86
KW07-850
KW07-725
CUT OFF MACHINE
KW07-441
KW07-804Balde not included
RECIPROCATING SAW
Light to Medium DutyMedium to Heavy DutyDIY (Personal Use Only)
10
Specification KW07-320 KW07-321 KW07-322Electric Cutter Long (mm) 298 298
Electric Cutter High (mm) 207 228Electric Cutter Weight (kg) 4.0 4.0Power (W) 500 625Power Supply Frequency (V/Hz) 220/50 220/50Electric Cutter Rotate Speed (rpm) 25000 25000Export Rotate Speed (rpm) 1000 800
Cutting Capacity f/ KW07-322:•Sheetsteel/ironplate :4mm•Stainlesssteel :<2.5mm•Othersoftmetalssuchas :aluminiumandcopper-4mm•Plastics :4mm•Minimumcuttingdiameter :300mm
Cutting Capacity f/ KW07-321:•Sheetsteel/ironplate :3mm•Stainlesssteel :1.8mm•Othersoftmetalssuchas :aluminiumandcopper-3mm•Plastics :3mm•Minimumcuttingdiameter :250mm
ContentHeavy Duty Electric Sheet Cutter (pc) 1 Innerl Lexangular Wrench (5mm) (pc) 1Screw Sleeve Wrench (pc) 1Fixed Handle (pc) 1Auxiliary Handle (pc) 1Instruction Manual (pc) 1Plastic Box (pc) 1
Cutting Capacity f/ KW07-320:•Sheet steel/iron plate : 2.3mm•Stainlesssteel : 1.6mm•Aluminium : 2.3mm•Copper : 2.3mm•Plastics : 2.3mm•Minimumcuttingdiameter: 250mm
SpecificationBlade Diameter (mm) 110
Max. Cutting Capacity (mm) 34
No Load Speed (rpm) 13300
Rated Input Power (W) 570
Rated Voltage (Hz) 220
Frequency (V) 50
Order No. Type Description
KW0700861 KW07-861 Marble Cutter 110mm, 570W
Order No. Type DescriptionKW0700320 KW07-320 Electric Punching Cutter 2.3mmKW0700321 KW07-321 Electric Punching Cutter 3mmKW0700322 KW07-322 Electric Punching Cutter 4mm
Features for KW07-1676:•Easytransportationandstorage•Precisioncut•Cuttingangle0°~45°•Applicationforceramictileonly
Ø 22mm / Ø 6x2mm
Feature for KW07-1677:•Wettype
ELECTRIC TILE CUTTER
Spesification KW07-1676
Max Cutt Off (mm) 32
No Load Speed (rpm) 2980
Rate Input Power (W) 720
Rated Voltage (V) 220 ~ 230
Diamond Wheel Diameter (mm) 180 x 22.2
Weight (kgs) 15.8
Order No. Type Description
KW0701676 KW07-1676 ElectricTileCutter720W
KW0701677 KW07-1677 Diamond Blade
Specification
Input Voltage (V) 220
Frequency (Hz) 50
Electrical Machine Power (W) 380
No-Load Speed (r/min) 1700
Cutting Thickness (mm) 1.8
Steel Sheet (mm) 1.2
Order No. Type Description
KW0701691 KW07-1691 Electric Cutter 1.8mm(Doublehead)
PUNCHING CUTTER
ELECTRIC CUTTER MARBLE CUTTER
11
Light to Medium DutyMedium to Heavy DutyDIY (Personal Use Only)
Specification KW07-538 KW07-539
Voltage (V/Hz) 220/50
Rate Input Power (W) 830 1050
Weight (kg) 17.5 30
Machine Weight (kg) 13 24.5
Cutting Speed (s) 3.0 ~ 3.5 5
Max. Rebar (mm) 20 25
Min. Rebar (mm) 4 4
Package Metal box
Box (mm) (L x W x H) 460 x 160 x 270 535 x 300 x 175
Machine Size (mm) (L x W x H) 410 x 115 x 220 480 x 255 x 150
Application
Order No. Type Description
KW0700538 KW07-538 Bar Cutter 4 - 20mm 830W
KW0700539 KW07-539 Bar Cutter 4 - 25mm 1050W
KW07-539
Order No. Type Description
KW0700791 KW07-791 Drum Sander and Polisher Machine 110mm / 1200W
Withthisversatilefinishingmachine,onecangofromroughsurfacesandinganddeburringallthewaytomirrorpolishingwithonetool.Thelinearrotationmakesthistoolperfectforflatsurface.Itdoesajobthatananglegrinder’srotarymotioncanneverdo.Itworkswonderfullysmoothing,removingscratchesandblending.Itmakesiteasytocreatesurfaceeffectsuchasmatte,satinandbrushfinishes.Cancreateswirl-freehigh-polishandmirrorpolishfinishes.Thisisalsoanidealtoolformaintaining,cleaningandpolishingoldmetalsurface.
Specification KW07-791Voltage (V/Hz) 230/50
Power Input (W) 1200
Rotation Speed (rpm) 1000 ~ 2400
Weight (kg) 4.8
Maximum Wheel Diameter (mm) 100
Maximum Wheel Width (mm) 100
Arbor 19mm double key x 100mm long
Dimension (mm) 572 x 362 x 238
•The1200Wmotorisequippedwithvariablefullwavefeedbackelectronicspeedcontrolforasmoothevenfinish.Nomattertheload,themotorkeepsthesameeven speed
•Theinflatablerubbersandingdrumhasawidevariatyofsleevesavailable.Therubber cushion follows the surface contours of the work piece for unbeatable finish
•Thedrivepulleyrunsinward-facingbeltsforfinishingtubeform.Thehookandloop closing straps allow the belts to be opened and closed around closed tube form. Bulk sanding rolls can be turned into belts
Standard Accessories:
Infalatable Rubber Sanding Drum•HardShellCase(572x362x238mm)• InflatableRubberSandingDrum•AirPump•SurfaceConditioningSleeve(100x
292mm)•SandpaperSleeve#60•SandpaperSleeve#100•SandpaperSleeve#180
Drive Pulley for Belt•DrivePulleyforBelt•SurfaceConditioningSleeve (40 x 600mm)•SandpaperBelt#120Grift (2pcs)•HookandLoopBeltClosing Straps (2pcs)
Surface Conditioning Flap Wheel•SurfaceConditioningFlapWheel (105 x 100 x 19mm)•ArborSpacerDiscs(40x19x5mm)
Speed control thumb wheel
Hard Shell Case
DRUM SANDER AND POLISHER
KW07-538
SANDER
BAR CUTTER
Light to Medium DutyMedium to Heavy DutyDIY (Personal Use Only)
12
Order No. Type Description
KW0700792 KW07-792 Belt Sander and Polisher 40 x 760mm / 1200W
Themachineespaciallydesignedforfinishingtubeforms.Thistoolmakesitincrediblyfastandeasytofinisclosedoropentubeform,suchasrailings,etc.Withdifferentbelts,youcanroughsandandfinesandtoremovesurfaceimperfections,blend,createsurfaceeffectslikesatinorbrushfinishes,allthewaytomirrorpolishing.Thearmsallowthebelttowarparoundtosurfacetocontact180degreesofthetubeatatime.Thereisnoeasierorfasterwaytodealwithtubeconstructions.
•The 1200Wmotor equippedwith variable full wave feedbackelecronicspeedcontrol forasmoothevenfinish.nomatter theload, the motor keeps the same even speed
•Highstabilitybelttracking.All3pulleysareflangedsothebeltsstay on under all conditions
•Quick,toolfreebeltchanges
Specification KW07-792Voltage (V/Hz) 230/50
Power Input (W) 1200
Rotation Speed (rpm) 1600 ~ 3200
Surface Speed (m/s) 3 ~ 12
Weight (kg) 3.4
Maximum Belt Length (mm) 760
Maximum Belt Width (mm) 40
Dimension (mm) 572 x 362 x 238
Standard Accessories:•HardShellCase(572x362x238mm)•SurfaceConditioningBelt(40x760mm)•SandpaperBELT#120Grift(20x760mm)10pcs•SandpaperBELT#220Grift(20x760mm)10pcs
Speed control thumb wheel
Lock ButtonTriggerSwitch
Hard Shell Case
BELT SANDER AND POLISHER
SpecificationSanding Belt Size (mm) 533 x 76
Rated Speed (m/min) 200 ~ 380
Rated Input Power (W) 810
Rated Voltage (V) 220
Frequency (Hz) 50
Order No. Type Description
KW0701007 KW07-1007 Belt Sander 533 x 76mm, 810W
SpecificationPad Size (mm) 93 x 185
Orbital Frequency (rpm) 10000
Rated Input Power (W) 160
Rated Voltage (V) 220
Frequency (Hz) 50
Order No. Type Description
KW0700846 KW07-846 Orbital Sander 93 x 185, 160W
SpecificationPad size (mm) 100 x 110
Orbital Frequency (rpm) 12000
Rated Input Power (W) 150
Rated Voltage (V) 220
Frequency (Hz) 50
Order No. Type Description
KW0700862 KW07-862 Orbital Sander 100 x 110 mm, 150W
BELT SANDER AND POLISHER
BELT SANDER
ORBITAL SANDER
13
Light to Medium DutyMedium to Heavy DutyDIY (Personal Use Only)
Features:• Equipped constant power control• Slim body design ensure a secure grip at all times• Aluminium gear housing for durability and prolonged life• Spindle lock for easy disc replacement• Multi positions handle with cover for advantage use• Lock-on button for extended use applications• Variable speed control system for facile operatingAccessories:•1pcauxiliaryhandle•1pcpolishingpad•1pcwoolfelt
Special Function
125mm/600W Specification KW07-655 KW07-803Rated Voltge (V) 220 220Frequency (Hz) 50 50Rated Input Power (W) 600 1300No Load Speed (rpm) 1200 ~ 5000 600 ~ 3000Pad Size (mm) 125 180Spindle Thread M14 M14Weight (kg) 1.75 3.3
Specification KW07-852Pad size (mm) Ø 180
No Load Speed (rpm) 1000 ~ 2400
Rated Input Power (W) 570
Rated Voltage (V) 220
Frequency (Hz) 50
180mm/1300W
180mm/570W
KW07-1637KW07-1638
KW07-749/1639
Order No Type Description
KW0701637 KW07-1637 GlueGun60Wwith2GlueStickØ 12.2mm
KW0701638 KW07-1638 GlueGun30Wwith6GlueStickØ 12.2mm
KW0700749 KW07-749 GlueStick11x100mm(Pce)
KW0701639 KW07-1639 GlueStick11.2x100mm(10Pcs/Pack)
Specification
Voltage (V/Hz) 220/50
No Load Speed (rpm) 14000
Cutting Width Diameter (mm) 250
Power Input (W) 350
Weight (kg) 1.6
Cutting SystemTwinBumpFeed, Auto Feed Head
Order No. Type Description
KW0701041 KW07-1041 GrassTrimmer250mm350watt
KW07-655
Order No. Type DescriptionKW0700655 KW07-655 Angle Polisher 125mm 600WKW0700803 KW07-803 Angle Polisher 180mm 1300W
KW0700852 KW07-852 Sander Polisher 180mm, 570W
KW07-803
Order No. Type Description Dimension (inch)
KW0700966 KW07-966 WoolBuffingPad 5”
KW0700967 KW07-967 WoolBuffingPad 7.5”
Material: •GenuineMerinoAustralian
Sheepskins•Applicable for polishing car
body or car interior
KW07-966
KW07-967
100%AustralianSheepskins
GRASS CUTTER
WOOL POLISHING PAD
KW07-852
ANGLE POLISHER
GLUE GUN
Light to Medium DutyMedium to Heavy DutyDIY (Personal Use Only)
14
Specification KW07-859 KW07-860
Low Temperature (°C) 50 ~ 400 50 ~ 480
High Temperature (°C) 50 ~ 550 50 ~ 600
Low Temperature Air Flow (L/min) 190 ~ 210 210 ~ 250
High Temperature Air Flow (L/min) 310 ~ 350 340 ~ 380
Rated Input Power (W) 1600 2000
Rated Voltage (V) 220 220
Frequency (Hz) 50 50
KW07-859
KW07-860Order No. Type Description
KW0700859 KW07-859 HeatGun1600W
KW0700860 KW07-860 HeatGun2000W
Specification KW07-591 KW07-1019Rated Voltage (V) 220 220
Frequency (Hz) 50 50
Rated Input Power (W) 400 650
No Load Speed (rpm) 16000 0 ~ 15000
Variable Speed No Yes
Order No. Type Description
KW0700591 KW07-591 Electric Blower 400W
KW0701019 KW07-1019 Electric Blower 650W
Specification KW07-726Rated Voltge (V) 220Frequency (Hz) 50Rated Input Power (W) 20Cable Length (m) 1.3
Suitable for:•Metal•Glass•Ceramic•Plastic
Order No. Type Description
KW0700726 KW07-726 Electric Engraver 20W, 220V
RoHS
BLOWER
KW07-1019
KW07-591
HEAT GUN
ELECTRIC ENGRAVER
15
Light to Medium DutyMedium to Heavy DutyDIY (Personal Use Only)
ELECTRIC MIXER
Specification
Height mm 745Diameter of Bottom Disc mm 400
Material - polyamide (PA) and steel pipeSteel Finishing - Powder CoatedQTY pcs/ctn 1Measurements mm 665x485x175N.W./G.W. kg 7.0/8.0
Order No. Type Description
KW0701596 KW07-1596 Stand for electric mixer KW07-570/1595
* Mixer Not Included
KW07-1597
KW07-1598/1600
KW07-1599
Specification KW07-1597 KW07-1600 KW07-1598 KW07-1599Diameter mm 120 120 160 120Length mm 600 600 600Tool Fitting - M14 x 2 M14 x 2 M14 x 2
User for
Optimal for mixing sticky and viscous materials, e.g. tile adhesive, bonding mortar, joint compound, ready-mixed plaster,floorscreed,fillers,etc.
Optimalforliquidorfibrousmaterialsinlarge quantities : e.g. wall paint, varnish, glaze, joint sealing compound, lime, plaster,filler,floorscreed,etc.,
It is perfect for dry mixtures such as mortar, plaster, cement, sand- and pebble-filledmaterials.Themixingtoolworks into the mixing material easily.
Order No. Type Description
KW0701597 KW07-1597 Mixer Paddle 120 x 600 M14 x 2, for sticky and viscous materials
KW0701600 KW07-1600 Mixer Paddle 120 x 600 M14 x 2, for Liquid
KW0701598 KW07-1598 Mixer Paddle 160 x 600 M14 x 2, for Liquid
KW0701599 KW07-1599 Mixer Paddle 120 x 600 M14 x 2, for Dry Mixtures
Specification KW07-570 KW07-1595
Voltage V/Hz/Ph 220/50/1 220/50/1No. Load Speed rpm 0 ~ 700 180 ~ 460/300 ~ 700Power W 1220 1600Mixing Paddle (Max) mm 120 160Tool Fitting mm 14 x 2 14 x 2Dimension cm 67.5x34.5x27 70x55x46Weight kg 13.5 23.5
Order No. Type DescriptionKW0700570 KW07-570 Electric Mixer 120mm, 1220WKW0701595 KW07-1595 Electric Mixer 160mm, 1600W
KW07-570
KW07-1595
Light to Medium DutyMedium to Heavy DutyDIY (Personal Use Only)
16
Order No. Type Description
KW0701238 KW07-1238 Auto Feeding Screw Machine M1.0 ~ 5.0
Features:Themachineisapplicabletoscrewofvariousspecifications(M1.0-M5.0). Fast and stable feeding can be realized just by making a simple adjustment to rails, with greatly reduces procurementcosts.Themachineiseasyandconvenienttouse and it is good value for money.• The design of sparate rails makes it possible to draw
out the rails to make adjustment freely, making it easy to operate
• Thepattentdesignmakesfeedingfastandstablewithoutscrews being seized up
• The feedingspeedandchargingspeedofmachinecanbe adjusted freely according to the various operation rquirements
• The machine is in common use for special 1:1 shortscrews and screws with gaskets
• Smallsize,occupyinglittlespace;anditiseasytomove• The drives of feeding and shaking of controlled
independently. Ideal time-lag shutdown time can be set freely.Themachinecanstartthefailurealarmingfunctionin case of abnormal conditions
Item
Applicable Screw
Diameter of Screw Thread
M1.0, 1.2, 1.4, 1.7, 2.0, 2.3, 2.6, 3.0, 3.5, 4.0, 5.0mm
Type of Screw Head
JLS : dish-shape head, tightened, pressure, UH spreding on head
(countersunk head or oval countersunk head) with or without gasket JCIS : type
1, 2, 3 and 4 dish-shape head
Material of Screw Head Iron or materials magnetic to magnet
Length of Screw (Max) 20mm
Length of Screw (Min)
Single screw : diameter x 1.0; screw with spring gasket :
diameter + (0.5 diameter; screw with gasket and gasket : diameter + (1.1 x
diameter)
Output Speed 2 pieces per second
Protection / Recovery Function Overload protection circuit, reverse power polarity prevention circuit
Input Voltage 180 ~ 220 ACV
Output Voltage 12 DCV 550 MA
External Dimansion (L x W x H) 180 x 125 x 150mm
Weight 2.5kg
Accessories Operation manual, universal AC adapter, inner hexagon spanner
Features:• Testingrangeoftorqueislargewithhighaccuracy.• Thetorqueturninginclockwiseoranticlockwisedirectioncanbe tested.There isneed tochangescrewdriverhead.Thetorque sensor is attached, which can test torque directly.
• Theunitoftorqueisintwocategories:kgf.cmandN.m.Itisconvenient to select the output mode of value.
• Themaximumvalue, theminimumvalueand theaveragevalue of torque can be calculated.
• Which can be connected to a computer for recording, editing and torque calculating.
• It is designed to be rechargeable and portable. Small volume and light weightmake the operation convenient.
Order No. Type Description
KW0701237 KW07-1237 TorqueTester1.5~100kgf.cm
Item AP-100
Range of Testing
(kgf.cm) 1.5 ~ 100.0
(N.m) 0.15 ~ 10.00
(lbf.in) 1.5 ~ 90.0
Accuracy of Torque ±0.5% (199 or lower than±one-digit number)
Display LCD digit number
Direction of Testing Clockwise, anticlockwise
Mode of Testing
PEAK lock display when the torque reaches peak value
TRACK display change of current torque value
F.PEAK lockdisplaywhenthetorquereachesfirstpeak value
Zero Adjustment Selec“TRACK”andsimultaneouslypress(SET)and(∆)fornomorethan2seconds.
Power Supply Five 1.2V nickel-hydrogen batteries 1,000mA
Charging Time About 6 hours
Continuous Using Time After Fully Charging 8 hours
Special Charger It can be charged for about 300 times
Dimension of Torque Transfer Base 12 angles or 20mm2
Dimension 230 (L) ×120 (W) ×60 (H)mm
Weight 2.0kg
Note
Do not test continuous impact type semi-automatic electric or pneumatic tools. Do not test the torque beyond the maximum testing range of the torque tester.
kls/
p&a.
154/
5k/k
w.2
86/c
an.te
k/08
.12
AUTO FEEDING SCREW MACHINE
TORQUE TESTER