268
MODUL – hinge systemSlide-on hinge system
MODUL – hinges
This economical hinge system provides the right solution for many different applications. The system‘s combined slide-on and screw-fix feature has proven itself over the years.
■Simple and easy slide-on assembly■Simple 3-way adjustment for perfect gap
alignment
Simple “slide-on” door to cabinet assembly
Catalogue 2011
269
Symbol photo
Symbol photo
Symbol photo
Catalogue 2011
MODUL – hinges ▶Overview ▶▶
MODUL – hinges
Accessories
Assembly, removal and adjustment
Pictograph
Mounting platesCover caps
284
ScrewsCentre bitDoor bufferScrewdriver
287288288288289
Assembly and removalAdjustment
290290
Item Available Upon Request
Accessories
General Information
Opening angle
Overlay application
Dual application
Inset application
Blind corner applications
Angled application inset
Angled application half overlay
Angled application overlay
Angled application max. overlay
Angled application mitered
Hinge with straight hinge arm
Hinge with cranked hinge arm
Hinge with double cranked hinge arm
Screw-on boss
EXPANDO-boss
Knock-in boss
Insertion ram for knock-in boss
Cover caps
Planning
Assembly, removal and adjustment
MODUL – hinge system
Overview – hingesOverview – angled applications
270271
MO
DUL
270 Catalogue 2011
MODUL – hinge systemMODUL – hinges▶Overview – applications▶▶
Application Boss FixingHinge applicationsStandard application
100°-hinge272
170°-hinge274
Profile door applicationProfile/thick door hinge
276Blind corner applications
Blind corner hinge inset application 278
Refrigerator applicationRefrigerator/appliance hinge 280
Angled application – standard
+45° angled hinge282
MO
DUL
271
MODUL – hinge systemMODUL – hinges ▶
Overview – angled applications ▶▶
Angled application – standard283 283 45°
Doo
r hei
ght (
mm
)
* kg
Number of HingesThe number of hinges depends on the front weight.
To achieve good stability, distances between hinges should be as large as possible.
Indications on weight and height apply to a standard door width of 600 mm.
Info box
MO
DUL
Catalogue 2011
Take advantage of DYNALOG limited included free on the DVD.■DYNAPLAN – cabinet planning incl. a collision check and fittings selection■DYNACAT – electronic product catalogue and CAD data export (dxf, dwg, igs, sat, x_t, jpg)■DYNASHOP – shopping basket and ordering function
272
MODUL – hinge systemMODUL – hinges▶Standard application▶▶
100°-hinge
Order informationOverlay application Dual application Inset application
Screw-on boss
Steel bossPart no.
91M2550 with spring
Screw-on boss
Steel bossPart no.
91M2650 with spring
Screw-on boss
Steel bossPart no.
91M2750 with spring
Knock-in boss
Steel boss 91M2580
MZM.0040
with spring
40 Knock-in boss
Steel boss 91M2680
MZM.0040
with spring
40 Knock-in boss
Steel boss 91M2780
MZM.0040
with spring
40
SteelPlainScreen print
Cover caps
90M2603 90M2603.BL
Blum
nickel plated
Accessories
SteelPlainScreen print
Cover caps
90M2603 90M2603.BL
Blum
nickel plated
Accessories
Accessories – general
3.5 x3.5 x
15 mm17 mm
Chipboard screws for hinge boss fixing
609.1500 609.1700
Page instructionsOverview – MODUL – hinges 269Accessories – mounting plates 284Accessories – cover caps 287Accessories – general 288Assembly, removal and adjustment 290Overview – assembly devices 705More technical details 804
- All metal hinge, nickel plated- 100° opening angle- With closing mechanism (spring)- Slide on hinge arm- 3-dimensional adjustment (with relevant mounting plate)
Catalogue 2011
SteelPlainStamped
Cover caps
90M2503 90M2503.BP
Blum
nickel plated
Accessories
MO
DUL
20
58
119F
3-6
1.5
30
58
18.5
3-6
F
38
58
7F
3-6
27
min 10.5
3-6
35 9.5
45
8
min 10.5
3-6
35
37
57 3.2
273Catalogue 2011
Hinge dimensions and gap calculation based on factory setting (mounting plate spacing = 0 mm)Hinge and door protrusion at full opening angle
F Gap Set mounting plate back by door thickness
MODUL – hinge systemMODUL – hinges ▶
Standard application ▶▶
100°-hingePlanning
Overlay application Dual application Inset application
Drilling distance
Mounting plate
Front overlay5 6 7 8 9 10 11 12 13 14 15 16 17
0 3 4 5 6
3 3 4 5 6
9 3 4 5 6
-
Mounting plate
Front overlay-4.5 -3.5 -2.5 -1.5 -0.5 0.5 1.5 2.5 3.5 4.5 5.5 6.5 7.5
0 3 4 5 6
3 3 4 5 6
9 3 4 5 6
-
Mounting plate
Front overlay -4 -3 -2 -1
0 3 4 5 6
3
9
-
Minimum gap (F) for fronts with a front radius (R = 1 mm) based on the factory settingThickness of door
16 18 19 20 21 22 24 26 28 30 31 323 0.3 0.5 0.7 1.0 1.3 1.6 3.34 0.3 0.5 0.7 1.0 1.2 1.6 3.25 0.3 0.5 0.7 0.9 1.2 1.5 2.66 0.3 0.5 0.7 0.9 1.1 1.4 2.4-
Drilli
ng d
is-ta
nce In these cases a trial is
recommended
Additional for + 2 mm side adjustment+ 0.1 + 0.3 + 0.3 + 0.4 + 0.4 + 0.5 + 0.4
Adjustment
max. ± 3.0 mm
+
-± 2.0 mm ± 2.0 mm+
- -+
See mounting plates
Info boxWe recommend cabinet planning with the colli-sion check feature using DYNAPLAN included free on the enclosed DYNALOG limited DVD.
Screw-on Knock-in Hinge boss dimensions
MO
DUL
274
MODUL – hinge systemMODUL – hinges▶Standard application▶▶
170°-hinge
Order informationOverlay application Dual application Inset application
Screw-on boss
Steel bossPart no.
91A6550 with spring
Screw-on boss
Steel bossPart no.
91A6650 with spring
For inset application use hinges for twin appli-cation and a 9 mm spaced mounting plate
Knock-in boss
Steel boss 91A6580
MZM.0040
with spring
40 Knock-in boss
Steel boss 91A6680 ☎
MZM.0040
with spring
40
Accessories – general
Nylon black130°
Opening angle stop
70.6103 ☎
3.5 x3.5 x
15 mm17 mm
Chipboard screws for hinge boss fixing
609.1500 609.1700
Page instructionsSafety information 807Overview – MODUL – hinges 269Accessories – mounting plates 284Accessories – cover caps 287Accessories – general 288Assembly, removal and adjustment 290Overview – assembly devices 705More technical details 804
- All metal hinge, nickel plated- 170° opening angle- With closing mechanism (spring)- Slide on hinge arm- 3-dimensional adjustment (with relevant mounting plate)
Catalogue 2011
Safety informationIf young children have access to furniture with wide angle hinges then the 155° opening 0-protrusion hinges should be used.
Safety informationWhen using MODUL wide angle hinges in wardrobes, please make sure that the ward-robe is deep enough (min. 600 mm) so that clothing does not interfere with the hinge link mechanism.
SteelPlainScreen print
Cover caps
80.6507 80.6507.BL
Blum
nickel plated
Accessories
SteelPlainScreen print
Cover caps
80.6507 80.6507.BL
Blum
nickel plated
Accessories
MO
DUL
max 65
69
118F
3-8
max 7569
1.5 F17.5
3-8
7.5
max 84
69
3-8
26.5 F
min 11
3-8
35 9.5
45
8
min 11
3-8
35
47
57 2.2
275
MODUL – hinge systemMODUL – hinges ▶
Standard application ▶▶
170°-hingePlanning
Overlay application Dual application Inset application
Drilling distance
Mounting plate
Front overlay5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
0 3 4 5 6 7 8
3 3 4 5 6 7 8
9 3 4 5 6 7 8
-
Mounting plate
Front overlay-4.5-3.5-2.5 -1.5-0.5 0.5 1.5 2.5 3.5 4.5 5.5 6.5 7.5 8.5 9.5
0 3 4 5 6 7 8
3 3 4 5 6 7 8
9 3 4 5 6 7 8
-
Mounting plate
Front overlay -4.5 -3.5 -2.5 -1.5 -0.5
0
3
9 3 4 5 6 7
-
Minimum gap (F) for fronts with a front radius (R = 1 mm) based on the factory settingFor doors up to 21 mm thick no gap is required.For doors in excess of 22 mm thick a trial is recommended.
Adjustment
max. ± 3.0 mm
+
-± 2.0 mm ± 2.0 mm+
- -+
See mounting plates
Info boxWe recommend cabinet planning with the colli-sion check feature using DYNAPLAN included free on the enclosed DYNALOG limited DVD.
Screw-on Knock-in Hinge boss dimensions
MO
DUL
Catalogue 2011
Hinge dimensions and gap calculation based on factory setting (mounting plate spacing = 0 or 9 mm)Hinge and door protrusion at 90° opening angle
F Gap Set mounting plate back by door thickness
276
MODUL – hinge systemMODUL – hinges▶Profile door application▶▶
Profile/thick door hinge
Order informationOverlay application Dual application Inset application
Screw-on boss
Steel bossPart no.
91M9550 with spring
Screw-on boss
Steel bossPart no.
91M9650 with spring
Screw-on boss
Steel bossPart no.
91M9750 with spring
Accessories – general
3.5 x3.5 x
15 mm17 mm
Chipboard screws for hinge boss fixing
609.1500 609.1700
Page instructionsOverview – MODUL – hinges 269Accessories – mounting plates 284Accessories – cover caps 287Accessories – general 288Assembly, removal and adjustment 290Overview – assembly devices 705More technical details 804
- Hinge for thick doors and doors with pro-file
- All metal hinge, nickel plated- 95° opening angle- With closing mechanism (spring)- Slide on hinge arm- 3-dimensional adjustment (with relevant mounting plate)
Catalogue 2011
SteelPlainStamped
Cover caps
90M2503 90M2503.BP
Blum
nickel plated
Accessories
SteelPlain
Cover caps
94M3603 nickel plated
Accessories
SteelPlain
Cover caps
94M3603 nickel plated
Accessories
MO
DUL
22
58
11
3-7
14.5F
3-7
3158
1.524F
3-7
732.5 F
40
58
min 12
3-7
35
37
57 3.2
277Catalogue 2011
Hinge dimensions and gap calculation based on factory setting (mounting plate spacing = 0 mm)Hinge and door protrusion at full opening angle
F Gap Set mounting plate back by door thickness
MODUL – hinge systemMODUL – hinges ▶
Profile door application ▶▶
Profile/thick door hingePlanning
Overlay application Dual application Inset application
Drilling distance
Mounting plate
Front overlay5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
0 3 4 5 6 7
3 3 4 5 6 7
9 3 4 5 6 7
-
Mounting plate
Front overlay-4.5-3.5-2.5 -1.5-0.5 0.5 1.5 2.5 3.5 4.5 5.5 6.5 7.5 8.5 9.5
0 3 4 5 6 7
3 3 4 5 6 7
9 3 4 5 6 7
-
Mounting plate
Front overlay -4 -3 -2 -1 0
0 3 4 5 6 7
3
9
-
Minimum gap (F) for fronts with a front radius (R = 1 mm) based on the factory settingThickness of door
16 18 19 20 22 24 26 28 29 30 31 323 0.2 0.3 0.4 0.5 0.8 1.0 1.5 1.9 2.8 3.6 4.5 5.44 0.2 0.3 0.4 0.5 0.7 1.0 1.4 1.8 2.5 3.1 4.0 4.85 0.2 0.3 0.4 0.5 0.7 1.0 1.4 1.8 2.3 2.7 3.5 4.36 0.2 0.3 0.4 0.5 0.7 1.0 1.4 1.8 2.2 2.5 3.2 3.87 0.2 0.3 0.4 0.5 0.7 0.9 1.4 1.7 2.1 2.4 3.0 3.5
Drilli
ng d
is-ta
nce
Additional for + 2 mm side adjustment+ 0.1 + 0.2 + 0.2 + 0.2 + 0.3 + 0.4 + 0.4 + 0.5 + 0.4 + 0.4 + 0.4 + 0.3
Adjustment
max. ± 3.0 mm
+
-± 2.0 mm ± 2.0 mm+
- -+
See mounting plates
Info boxWe recommend cabinet planning with the colli-sion check feature using DYNAPLAN included free on the enclosed DYNALOG limited DVD.
Screw-on Hinge boss dimensions
MO
DUL
278
MODUL – hinge systemMODUL – hinges▶Blind corner applications▶▶
Blind corner hinge inset application
Order informationInset application
Screw-on boss
Steel bossPart no.
99M9550 with spring
Knock-in boss
Steel boss 99M9580
MZM.0040
with spring
40
Accessories – general
nickel platedZincSpacing 3 mm
Mounting plate
199.8130 Part no.
3.5 x3.5 x
15 mm17 mm
Chipboard screws for hinge boss fixing
609.1500 609.1700
Page instructionsOverview – MODUL – hinges 269Accessories – mounting plates 284Accessories – cover caps 287Accessories – general 288Assembly, removal and adjustment 290Overview – assembly devices 705More technical details 804
- All metal hinge, nickel plated- 95° opening angle- With closing mechanism (spring)- Slide on hinge arm- 3-dimensional adjustment (with relevant mounting plate)
Catalogue 2011
SteelPlainStamped
Cover caps
90M2503 90M2503.BP
Blum
nickel plated
Accessories
MO
DUL
min 28
23
33
min 69
14
3-7
8F
min 12
3-7
35 9.5
45
8
min 12
3-7
35
37
57 3.2
279Catalogue 2011
Hinge dimensions and gap calculation based on factory setting (mounting plate spacing = 3 mm)Hinge and door protrusion at full opening angle
Fixing position from inside edge of muntin: 14 mmSpecial mounting plate for blind corner application: 199.8130
F Gap
MODUL – hinge systemMODUL – hinges ▶
Blind corner applications ▶▶
Blind corner hinge inset applicationPlanning
Inset application
Minimum gap (F) for fronts with a front radius (R = 1 mm) based on the factory settingThickness of door
16 18 19 20 22 24 26 28 29 30 31 323 0.2 0.3 0.4 0.5 0.8 1.0 1.5 1.94 0.2 0.3 0.4 0.5 0.7 1.0 1.4 1.85 0.2 0.3 0.4 0.5 0.7 1.0 1.4 1.86 0.2 0.3 0.4 0.5 0.7 1.0 1.4 1.87 0.2 0.3 0.4 0.5 0.7 0.9 1.4 1.7
Drilli
ng d
is-ta
nce In these cases a trial is
recommended
Adjustment
max. ± 3.0 mm
+
-± 2.0 mm ± 0.8 mm+
- -+
See mounting plates
Info boxWe recommend cabinet planning with the colli-sion check feature using DYNAPLAN included free on the enclosed DYNALOG limited DVD.
Screw-on Knock-in Hinge boss dimensions
MO
DUL
1
280
MODUL – hinge systemMODUL – hinges▶Refrigerator application▶▶
Refrigerator/appliance hinge
Order informationOverlay application
Screw-on boss
Zinc bossPart no.
91M0500.21 with spring
Knock-in boss
Zinc boss 91M0530.21
MZM.0040
with spring
40
Accessories – general
3.5 x3.5 x
15 mm17 mm
Chipboard screws for hinge boss fixing
609.1500 609.1700
Page instructionsOverview – MODUL – hinges 269Accessories – mounting plates 284Accessories – cover caps 287Accessories – general 288Assembly, removal and adjustment 290Overview – assembly devices 705More technical details 804
- Hinge for refrigerator or appliance doors- Shallow hinge arm height- All metal hinge, nickel plated- 94° opening angle- With closing mechanism (spring)- Slide on hinge arm- 3-dimensional adjustment (with relevant mounting plate)
Catalogue 2011
SteelPlainStamped
Cover caps
90M2503 90M2503.BP
Blum
nickel plated
Accessories
MO
DUL
3-5
57
5 10.5
16
F
min 12.5
3-5
359.5
45
9.5
45
8
min 12,5
3-5
35
37
57 2.5
281Catalogue 2011
Hinge dimensions and gap calculation based on factory setting (mounting plate spacing = 0 mm)Hinge and door protrusion at full opening angle
F Gap
MODUL – hinge systemMODUL – hinges ▶
Refrigerator application ▶▶
Refrigerator/appliance hingePlanning
Overlay application
Drilling distance
Mounting plate
Front overlay4.5 5.5 6.5 7.5 8.5 9.5 10.5 11.5 12.5 13.5 14.5 15.5 16.5
0 3 4 5
3 3 4 5
9 3 4 5
-
Minimum gap (F) for fronts with a front radius (R = 1 mm) based on the factory settingThickness of door
16 18 19 20 22 23 24 26 28 30 31 323 1.1 2.2 3.0 3.8 5.54 1.1 2.0 2.7 3.5 5.05 1.1 1.8 2.4 3.0 4.6--
Drilli
ng d
is-ta
nce
In these cases a trial is recommended
Adjustment
max. ± 3.0 mm
+
-+ 0.0 mm ± 2.0 mm- 4.0 mm
+- -
+
See mounting plates
Info boxWe recommend cabinet planning with the colli-sion check feature using DYNAPLAN included free on the enclosed DYNALOG limited DVD.
Screw-on Knock-in Hinge boss dimensions
MO
DUL
282
MODUL – hinge systemMODUL – hinges▶Angled application – standard▶▶
+45° angled hinge
Overview – MODUL – angled applica-tions
283
283
-
-
45°
271
Order informationScrew-on boss
Steel bossPart no.
99M1550 with spring
SteelPlainStamped
Cover caps
90M2503 90M2503.BP
Blum
nickel plated
Accessories
Accessories – general
3.5 x3.5 x
15 mm17 mm
Chipboard screws for hinge boss fixing
609.1500 609.1700
Page instructionsOverview – MODUL – hinges 269Accessories – mounting plates 284Accessories – cover caps 287Accessories – general 288Assembly, removal and adjustment 290Overview – assembly devices 705More technical details 804
Planning
Corner cabinet
MO
DUL
- For corner cabinets with flush fronts- All metal hinge, nickel plated- +45° angled hinge- 107° opening angle- With closing mechanism (spring)- Slide on hinge arm- 3-dimensional adjustment (with relevant mounting plate)
Catalogue 2011
LW Internal widthTB Door width
Important:These dimensions are based on a 19 mm thick door and cabinet. Dimensions would need to be altered if thickness varied from 19 mm. In these cases a trial is recommended. Some applications require the mounting plate to be moved from the standard fixing positions.
16.6
33.5
42
61
5
5.513.6
30.5
45.564
.5
45
2.5
283
MODUL – hinge systemMODUL – hinges ▶
Angled application – standard ▶▶
+45° angled hingePlanning
45° 45°
Use 3 mm spaced mounting plate Use 0 mm spaced mounting plate
Info boxWe recommend cabinet planning with the colli-sion check feature using DYNAPLAN included free on the enclosed DYNALOG limited DVD.
Adjustment
max. ± 3.0 mm
+
-± 1.8 mm ± 2.0 mm+
- -+
See mounting plates
Screw-on Knock-in Hinge boss dimensions
MO
DUL
Catalogue 2011
58
53
62.5
44
32
*
*
H
37
32
*
*
H
37
284
MODUL – hinge systemMODUL – hinges▶Accessories▶▶
Overview – mounting plates
Knock-in dowelEXPANDOSystem screwsChipboard screws
Height adjustment
286± 2 mmwith
285285286
286± 3 mm± 2 mm
± 2 mm284284
Elongated holeElongated holeScrews (two-part)
PictographItem Available Upon Request
Accessories
General Information
Horizontal mounting plate
Cruciform mounting plate
Chipboard screw fixing
System screw fixing
Knock-in dowel fixing
Knock-in dowel fixing – assembly only with the insertion ram
Cruciform mounting plate 37/32
Spacing Height0 mm3 mm
8.3 mm11.3 mm
193L6100 193L6130
Part no.
Cruciform mounting plate 37/32
Spacing Height0 mm3 mm9 mm
9.2 mm12.2 mm18.2 mm
195H7100 195H7130 195H7190
Part no.
MO
DUL
Catalogue 2011
- Material: zinc die-cast, nickel plated
- Fixing with chipboard screws Ø 3.5 and Ø 4 mm
- With height adjustment ± 2 mm
- Recommended screw length 17 mm
- Material: steel, nickel plated- Fixing with chipboard screws Ø 3.5 and Ø 4 mm
- With height adjustment ± 3 mm
- Recommended screw length 17 mm
H Height
* Fix with ad-ditional screw if used with wide angle hinges
H Height
* Fix with ad-ditional screw if used with wide angle hinges
58
53
58
53
28
50
62.5
44
32
5
*
* min 11.5
H
37
32
5
*
*
min 8.5
H
37
14
32 5
min 11.5
H
37
32
5
*
*
min 11.5
H
285
MODUL – hinge systemMODUL – hinges ▶
Accessories ▶▶
Cruciform mounting plate 37/32
Spacing Height0 mm3 mm
8.3 mm11.3 mm
193L8100 193L8130
Part no.
Cruciform mounting plate for twin application 37/32
Spacing Height0 mm 8.3 mm 193L8100.21
Part no.
Cruciform mounting plate for blind corner applications 14/32
Spacing Height3 mm 12.2 mm 199.8130
Part no.
Cruciform mounting plate 37/32
Spacing Height0 mm 9.2 mm 195H9100
Part no.
MO
DUL
Catalogue 2011
- Material: zinc die-cast, nickel plated
- Fixing with system screws Ø 6 x 14.5 mm (661.1450)
- With height adjustment ± 2 mm
- Material: zinc die-cast, nickel plated
- Fixing with pre-mounted system screws Ø 6 mm
- With height adjustment ± 2 mm
- For blind corner applica-tions
- Material: steel, nickel plated- Fixing with pre-mounted system screws Ø 6 mm
- With height adjustment ± 3 mm
- Material: steel, nickel plated- Fixing with pre-mounted system screws Ø 6 mm
- With height adjustment ± 3 mm
- For twin application
H Height
* Fix with ad-ditional screw if used with wide angle hinges
H Height
* Fix with ad-ditional screw if used with wide angle hinges
H Height
* Additional screw required as standard
H Height
58
53
58
53
57.5
19
28
32
5
*
min 11.5
H
32
5
*
*
min 11.5
H
37
2032
10
min 11.5
H
286
MODUL – hinge systemMODUL – hinges▶Accessories▶▶
Cruciform mounting plate 28/32
Spacing Height0 mm 8.3 mm 193L8300.22
Part no.
Cruciform mounting plate 37/32
Spacing Height0 mm3 mm
8.3 mm11.3 mm
194E6100.ED194E6130.ED
Part no.
Horizontal mounting plate 20/32
Spacing Height0 mm
Assembly with insertion ram onlyMZM.0050
9.2 mm 197M6100 Part no.
50
MO
DUL
Catalogue 2011
- Material: steel, nickel plated- Fixing with pre-mounted system screws Ø 6 mm
- With height adjustment ± 3 mm
- Material: steel, nickel plated- Fixing with pre-mounted special screws with split dowels (EXPANDO)
- With height adjustment ± 2 mm
- Material: zinc die-cast, nickel plated
- Knock-in assembly with pre-fixed dowels
- With height adjustment ± 2 mm
H Height
* Fix with ad-ditional screw if used with wide angle hinges
H Height
* Fix with ad-ditional screw if used with wide angle hinges
H Height
287
MODUL – hinge systemMODUL – hinges ▶
Accessories ▶▶
Cover capsCranked hinge armStraight hinge armDouble cranked arm
Hinge applications
SteelScreen print
90M2603.BL
SteelStamped
SteelPlain
100°-hinge
90M2603 90M2503.BP 90M2503
SteelPlain
SteelScreen print
80.6507.BL
SteelScreen print
SteelPlain
170°-hinge
80.6507 80.6507.BL 80.6507
SteelPlain
SteelStamped
SteelPlain
Cover caps: can be printed with customer logo – minimums from 1000 pcs
Refrigerator/appliance hinge+45° angled hinge
Blind corner hinge
90M2503.BP 90M2503
Catalogue 2011
SteelStamped
SteelPlain
Profile/thick door hinge
94M3603 90M2503.BP 90M2503
SteelPlain
MO
DUL
Ø3.5
X
Ø7
Ø6
X
Ø8
288
MODUL – hinge systemMODUL – hinges▶Accessories▶▶
Chipboard screws Ø 3.5 mmLength (X)
609.1500 609.1700
15 mm17 mm
Part no.
System screws Ø 6.0 mmLength (X)
661.1000.HG661.1150.HG661.1300.HG661.1450.HG661.2000.HG
10 mm11.5 mm13 mm14.5 mm20 mm
Part no.
Centre bit
M01.ZZ03 M01.ZZB3
Part no.
Centre bitDrill bit
Stick-on door buffer
993.710 Part no.
naturalNylon
8 mm Ø door buffer
993.706 Part no.
RAL 9006 white aluminiumNylon
MO
DUL
Catalogue 2011
- Nickel plated- Ø 3.5 mm
- Hardened- Ø 2.7 mm, length 70 mm- To pre-drill for Ø 3.5 mm chipboard screws- Drilling depth up to 8 mm
- For noise reduction
- For noise reduction- Gap 2 mm- Two-part
- Nickel plated- Ø 6 mm- Drilling diameter 5 mm
289Catalogue 2011
- PZ (Pozi) size 2- Blade length 100 mm- Overall length 200 mm- Orange handle with Blum logo
- Slotted, size 1.0 x 5.5 mm- Blade length 125 mm- Overall length 225 mm- Orange handle with Blum logo
MODUL – hinge systemMODUL – hinges ▶
Accessories ▶▶
Pozidrive screwdriver
303.756.1Part no.
orangeNylon/steel
Slotted screwdriver
314.928.1Part no.
orangeNylon/steel
MO
DUL
290
MODUL – hinge systemMODUL – hinges▶Assembly, removal and adjustment▶▶
MODUL
Adjustment
MO
DUL
Assembly Removal
Height adjustment Side adjustment Depth adjustment
Catalogue 2011
291
MODUL – hinge system
MO
DUL
Catalogue 2011