+ All Categories
Transcript
Page 1: Bridge Light - Premier Materials...w: e: info@sealite.com Sealite Pty Ltd AUSTRALIA t: +61 (0)3 5977 6128 Sealite USA, LLC USA t:+1 (603) 737 1311 Sealite United Kingdom Ltd United

The Sealite Advantage•Upto4NMvisiblerange

• IRprogrammable (VDCModelonly)

•Abletooperateinconjunctionwithexistingpowersupplies

•Optionalsolar/batterysystemsavailable

•OptionaluniversalAC: willacceptbetween110–240VAC

•Optionalmountingaccessories

TheSL-BRisanLEDBridgeLightspecificallydesignedtoclearlymarkbridgesandstructuresextendingovernavigablewaterwaysandisusedextensivelythroughouttheUSA.TheSL-BRhasbeendesignedtooffersuperiorvisibilitywithupto4NMvisiblerange,andoperatesinconjunctionwithexistingpowersupplies.

The light is available as a 180o sectored red model or 360o green model and comes fixed-on as standard. The fixtures are also available with a range of factory-set flash characteristics and sectoring requirements to suit local regulations.

The light is available in two configurations, nominal 12VDC or universal AC (110-240VAC).

The 12VDC model may be provided with an IR programmer for added functionality. Programmable features include; intensity adjustment, flash code adjustment, battery diagnostics and ON/OFF lux setting adjustment.

The SL-BR can also be supplied as a complete solar/battery system to comply with requirements of regional governing bodies such as the U.S. Coast Guard, or the IALA Recommendations for the marking of fixed bridges over navigable waters.

Sealitehasarangeofothershort,mediumandlongrangemarinelanternsthatmayalsobeusedtocomplywithbridgelightingrequirements.

Post mount

Lens and enclosure moulded from UV-stabilised

LEXAN® polycarbonate

Automatic night activation

LED optic

Alsoavailablewith optionalsolar/batterysystemsand

optionalmountingaccessories

BridgeLightSL-BR

SL-70 180o model for bridge fenders & abutments

SL-155 Series bridge lights

SectoredBridgeLight

T/CT/C

Read Lux

Flash Code Intensity Battery Status

Test / Con�gure

1 2 3

4 5 6

7 8 9

R 0 L

FC I B

Lux D-N Lux N-D

IR P

rogr

amm

erOptional

V1_

2015

w: www.sealite.come: [email protected]

SealitePtyLtdAUSTRALIAt: +61 (0)3 5977 6128

SealiteUSA,LLCUSAt:+1 (603) 737 1311

SealiteUnitedKingdomLtdUnited Kingdomt:+44 (0) 1502 588026

Premier Materials Technology, Inc.7401 Central Ave. NE • Minneapolis, MN 55432

Phone 763-785-1411 • Fax 763-785-1509

Manufactured by Sealite

Delivering quality marine products since 1992www.premiermaterials.com

800-262-2275

Page 2: Bridge Light - Premier Materials...w: e: info@sealite.com Sealite Pty Ltd AUSTRALIA t: +61 (0)3 5977 6128 Sealite USA, LLC USA t:+1 (603) 737 1311 Sealite United Kingdom Ltd United

BridgeLightSL-BR

• Specifications subject to change or variation without notice

* Subject to standard terms and conditions

SPECIFICATIONS•* SL-BRLightCharacteristicsLight Source LEDAvailable Colours Red, Green, other colours available on requestVisible Range (NM) AT @ 0.74: 2 (nominal)

AT @ 0.85: 2.3Horizontal Output (degrees) 360 or 180Vertical Divergence (degrees) 9Available Flash Characteristics Steady-on (standard). Other factory set flash patterns available on requestLED Life Expectancy (hours) >100,000

ElectricalCharacteristicsCurrent Draw (mA) VDC Model: 40 @ 12 VDCCircuit Protection IntegratedNominal Voltage (V) VDC Model: 12–48 VDC

VAC Model: 110–240 VACTemperature Range -40 to 80°C

PhysicalCharacteristicsBody Material LEXAN® Polycarbonate – UV-stabilisedLens Material LEXAN® Polycarbonate – UV-stabilisedLens Diameter (mm/inches) 107 / 41/4

Lens Design LED opticMounting 50mm OD poleHeight (mm/inches) 105 / 4Width (mm/inches) 109 / 41/4

Mass (kg/lbs) 1.2 / 25/8 Product Life Expectancy Up to 12 years

CertificationsCE EN61000-6-3:1997. EN61000-6-1:1997IALA Signal colours compliant to IALA E-200-1Quality Assurance ISO9001:2008

IntellectualPropertyPatents US Pat. No. 6,667,582. AU Pat. No. 778,918Trademarks SEALITE® is a registered trademark of Sealite Pty Ltd

Warranty* 3 years

OptionsAvailable • IR Programmer (VDC model only)• 200mm bolt pattern mounting plate• Mounting assemblies• Solar/battery systems• Light sectoring • Additional cable

74.5

105

.00

12.

5 1

2.5

12.5 12.5

109

M5 Brass insert

Notes:-1. Break all sharp edges.

Rev Model rev

ECR No.

Description Date:- Drawn:- Approved:-

N/A A4SolidWorksmmDrawn in:-Units

Sheet Size:-

N/AFinish:-

SL Bridge Light Base

N/A -

Wt(Kg) each:-

Material/Quantity

S.Turner

J.Procter

W.Spoor

N/A

000358-000

N/A

General TolerancesLinearXX.XX.XX

±1.2±0.3±0.1

AngularXX.X

±1.0°±0.5°

±2.0±0.5

RadiiXX.X 0Drawing Rev:-

Drawn:-

9/08/2014

9/08/2014

Approved:-

Checked:-

8/04/2014

0

SL Bridge Light Base Assembly

Qty per Ass'y:-

Drawing No:-

File Name:-

SheetScaleProjection

Next Ass'y:-

1:2 1 of 1

Model Rev:-

Sealite

V1_

2015

w: www.sealite.come: [email protected]

SealitePtyLtdAUSTRALIAt: +61 (0)3 5977 6128

SealiteUSA,LLCUSAt:+1 (603) 737 1311

SealiteUnitedKingdomLtdUnited Kingdomt:+44 (0) 1502 588026

Premier Materials Technology, Inc.7401 Central Ave. NE • Minneapolis, MN 55432

Phone 763-785-1411 • Fax 763-785-1509

Manufactured by Sealite

Delivering quality marine products since 1992www.premiermaterials.com

800-262-2275

BridgeLightSL-BR

• Specifications subject to change or variation without notice

* Subject to standard terms and conditions

SPECIFICATIONS•* SL-BRLightCharacteristicsLight Source LEDAvailable Colours Red, Green, other colours available on requestVisible Range (NM) AT @ 0.74: 2 (nominal)

AT @ 0.85: 2.3Horizontal Output (degrees) 360 or 180Vertical Divergence (degrees) 9Available Flash Characteristics Steady-on (standard). Other factory set flash patterns available on requestLED Life Expectancy (hours) >100,000

ElectricalCharacteristicsCurrent Draw (mA) VDC Model: 40 @ 12 VDCCircuit Protection IntegratedNominal Voltage (V) VDC Model: 12–48 VDC

VAC Model: 110–240 VACTemperature Range -40 to 80°C

PhysicalCharacteristicsBody Material LEXAN® Polycarbonate – UV-stabilisedLens Material LEXAN® Polycarbonate – UV-stabilisedLens Diameter (mm/inches) 107 / 41/4

Lens Design LED opticMounting 50mm OD poleHeight (mm/inches) 105 / 4Width (mm/inches) 109 / 41/4

Mass (kg/lbs) 1.2 / 25/8 Product Life Expectancy Up to 12 years

CertificationsCE EN61000-6-3:1997. EN61000-6-1:1997IALA Signal colours compliant to IALA E-200-1Quality Assurance ISO9001:2008

IntellectualPropertyPatents US Pat. No. 6,667,582. AU Pat. No. 778,918Trademarks SEALITE® is a registered trademark of Sealite Pty Ltd

Warranty* 3 years

OptionsAvailable • IR Programmer (VDC model only)• 200mm bolt pattern mounting plate• Mounting assemblies• Solar/battery systems• Light sectoring • Additional cable

74.5

105

.00

12.

5 1

2.5

12.5 12.5

109

M5 Brass insert

Notes:-1. Break all sharp edges.

Rev Model rev

ECR No.

Description Date:- Drawn:- Approved:-

N/A A4SolidWorksmmDrawn in:-Units

Sheet Size:-

N/AFinish:-

SL Bridge Light Base

N/A -

Wt(Kg) each:-

Material/Quantity

S.Turner

J.Procter

W.Spoor

N/A

000358-000

N/A

General TolerancesLinearXX.XX.XX

±1.2±0.3±0.1

AngularXX.X

±1.0°±0.5°

±2.0±0.5

RadiiXX.X 0Drawing Rev:-

Drawn:-

9/08/2014

9/08/2014

Approved:-

Checked:-

8/04/2014

0

SL Bridge Light Base Assembly

Qty per Ass'y:-

Drawing No:-

File Name:-

SheetScaleProjection

Next Ass'y:-

1:2 1 of 1

Model Rev:-

Sealite

V1_

2015

w: www.sealite.come: [email protected]

SealitePtyLtdAUSTRALIAt: +61 (0)3 5977 6128

SealiteUSA,LLCUSAt:+1 (603) 737 1311

SealiteUnitedKingdomLtdUnited Kingdomt:+44 (0) 1502 588026

BridgeLightSL-BR

• Specifications subject to change or variation without notice

* Subject to standard terms and conditions

SPECIFICATIONS•* SL-BRLightCharacteristicsLight Source LEDAvailable Colours Red, Green, other colours available on requestVisible Range (NM) AT @ 0.74: 2 (nominal)

AT @ 0.85: 2.3Horizontal Output (degrees) 360 or 180Vertical Divergence (degrees) 9Available Flash Characteristics Steady-on (standard). Other factory set flash patterns available on requestLED Life Expectancy (hours) >100,000

ElectricalCharacteristicsCurrent Draw (mA) VDC Model: 40 @ 12 VDCCircuit Protection IntegratedNominal Voltage (V) VDC Model: 12–48 VDC

VAC Model: 110–240 VACTemperature Range -40 to 80°C

PhysicalCharacteristicsBody Material LEXAN® Polycarbonate – UV-stabilisedLens Material LEXAN® Polycarbonate – UV-stabilisedLens Diameter (mm/inches) 107 / 41/4

Lens Design LED opticMounting 50mm OD poleHeight (mm/inches) 105 / 4Width (mm/inches) 109 / 41/4

Mass (kg/lbs) 1.2 / 25/8 Product Life Expectancy Up to 12 years

CertificationsCE EN61000-6-3:1997. EN61000-6-1:1997IALA Signal colours compliant to IALA E-200-1Quality Assurance ISO9001:2008

IntellectualPropertyPatents US Pat. No. 6,667,582. AU Pat. No. 778,918Trademarks SEALITE® is a registered trademark of Sealite Pty Ltd

Warranty* 3 years

OptionsAvailable • IR Programmer (VDC model only)• 200mm bolt pattern mounting plate• Mounting assemblies• Solar/battery systems• Light sectoring • Additional cable

74.5

105

.00

12.

5 1

2.5

12.5 12.5

109

M5 Brass insert

Notes:-1. Break all sharp edges.

Rev Model rev

ECR No.

Description Date:- Drawn:- Approved:-

N/A A4SolidWorksmmDrawn in:-Units

Sheet Size:-

N/AFinish:-

SL Bridge Light Base

N/A -

Wt(Kg) each:-

Material/Quantity

S.Turner

J.Procter

W.Spoor

N/A

000358-000

N/A

General TolerancesLinearXX.XX.XX

±1.2±0.3±0.1

AngularXX.X

±1.0°±0.5°

±2.0±0.5

RadiiXX.X 0Drawing Rev:-

Drawn:-

9/08/2014

9/08/2014

Approved:-

Checked:-

8/04/2014

0

SL Bridge Light Base Assembly

Qty per Ass'y:-

Drawing No:-

File Name:-

SheetScaleProjection

Next Ass'y:-

1:2 1 of 1

Model Rev:-

Sealite

V1_

2015

w: www.sealite.come: [email protected]

SealitePtyLtdAUSTRALIAt: +61 (0)3 5977 6128

SealiteUSA,LLCUSAt:+1 (603) 737 1311

SealiteUnitedKingdomLtdUnited Kingdomt:+44 (0) 1502 588026


Top Related