8/19/2019 BT Alcohols _Theory-01_ .pdf
1/22
8/19/2019 BT Alcohols _Theory-01_ .pdf
2/22
ALCOHOLS, PHENOLS AND ETHERS OP-CMIII-174
East Delhi Centre : Ph.: 22792226-27, West Delhi Centre : Ph.: 25527517-18, North Delhi Centre : Ph.: 25221424-25, South Delhi Centre : Ph.: 26537392-95 Fax: 26537396
The monohydric alcohols can further be classified according to the type of carbon that
bears the OH group. An alcohol in which OH group is attached to carbon atom, which in turn islinked to only one carbon atom, is called primary (1°) alcohol. Similarly, an alcohol in which OH
group is attached a carbon atom which is linked to two carbon atoms is called secondary (2°)alcohol and an alcohol in which the carbon atom bearing OH group is attached to three carbonatoms is called tertiary (3°) alcohol. For example,
R C OH
H
Primary(1°)
H
R C OH
R
Secondary(2°)
H
R C OH
R
Tertiary(3°)
R
2. IUPAC NOMENCLATURE OF ALCOHOLS
For certain alcohols, common names are used extensively with respect to their IUPAC names. The common names are derived by adding the suffix alcohol to the name of alkyl group. Common names of few alcohols are
Ethyl alcohol
CH3 –CH–CH3
OH
CH3CH2OH
Isopropyl alcohol
CH3 –CH–CH2OH
CH3
Isobutyl alcohol
CH2OH
Benzyl alcohol
CH3COH
tertbutyl alcohol
CH3
CH3
CH3CCH2OH
Neopentyl alcohol
CH3
CH3
The IUPAC rules of naming alcohols are as follows:
(a) Select the parent chain structure as the longest continuous carbon chain that contains the
OH group, then consider the compound to have been derived from this structure byreplacement of hydrogen by various groups. The parent structure is known as ethanol,propanol, butanol etc. depending on the number of carbon atoms. Each name is derived by
replacing the terminal −e of the corresponding alkane by −ol.
(b) Indicate by a number, the position of the OH group in the parent chain, using the lowest
possible number.(c) Indicate by numbers, the positions of other groups attached to the parent chain.
2Phenylethanol
CH3CH2 –CH–CH2OH
CH3
CH2CH2OH
2Methyl1butanol
CH3OHMethanol
2Methyl2butanol
CH3 –CH–CH–CH3
OH
CH3CH2CCH3
3Methyl2butanol
Cl–CH2CH2 –OH
CH3
2ChloroethanolOH
CH3
CH3 –CH–CH=CH2
OH3Buten2ol
8/19/2019 BT Alcohols _Theory-01_ .pdf
3/22
ALCOHOLS, PHENOLS AND ETHERS OP-CMIII-175
East Delhi Centre : Ph.: 22792226-27, West Delhi Centre : Ph.: 25527517-18, North Delhi Centre : Ph.: 25221424-25, South Delhi Centre : Ph.: 26537392-95 Fax: 26537396
Alcohols containing two hydroxyl groups are called glycols. They have both common nameand IUPAC names. Common names are given in parenthesis.
1, 2ethanediol(Ethylene glycol)
CH3 –CHCH2OH
CH2 –CH2 CH2CH2CH2OH OH OH
1, 2propanediol(Propylene glycol)
OH OH1, 3propanediol
(Trimethylene glycol) cis1, 2cyclopentanediol
H
HH
H
H
HH
OH
H
HO
3. METHODS OF PREPARATION OF ALCOHOLS
Monohydric alcohols can be prepared by the following methods:3.1 OXYMERCURATION−DEMERCURATION
Alkenes can be converted into alcohols by oxymercurationdemercuration reaction. In thisreaction, addition of water takes place according to Markownikoff’s rule.
Mercuricacetate
C = C + Hg(OAc)2 + H2O C C
OH
NaBH4C C
HgOAc
OH HMarkownikoff
addition
AcOH –Hg
–OAc –
For example,
CH3CCH=CH2 CH3C CHCH2
CH3
CH3
Hg(OAc)2
+ H2O
CH3
CH3 OH
HgOCOCH3NaBH4
CH3C CHCH3
CH3
CH3 OH
3.2 HYDROBORATION−OXIDATION
Alkenes react with diborane to form trialkyl boranes, which upon treatment with alkaline
H2O2 give alcohols via antiMarkownikoff’s addition of water.
Alkyl borane
C = C + (BH3)2 H2O2, OH
H BH2
C COHH
C C + B(OH)3
AntiMarkownikoff addition of H2O
THF
For example,
CH3
(i) (BH3)2 (ii) H2O2, OH
Synadditon
OH
CH3
H
H
1Methylcyclopentene 2Methyl1cyclopentanol
8/19/2019 BT Alcohols _Theory-01_ .pdf
4/22
ALCOHOLS, PHENOLS AND ETHERS OP-CMIII-176
East Delhi Centre : Ph.: 22792226-27, West Delhi Centre : Ph.: 25527517-18, North Delhi Centre : Ph.: 25221424-25, South Delhi Centre : Ph.: 26537392-95 Fax: 26537396
CH3CCH=CH2
CH3
CH3
(i) (BH3)2 (ii) H2O2 , OH
3, 3Dimethyl1butene
CH3CCH2CH2OH
CH3
CH33, 3Dimethyl1butanol
(No rearrangement)
(i) Hydroboration–oxidation of non–terminal alkynes leads to the formation of ketones. For example,
3RCCR BH3 (RCH=CR)3BH2O2/OH
3 R–CH=C–R 3 RCH2COR
OH
THF
(ii) Noncatalytic hydrogenation: Hydroboration–oxidation can be used to reduce doublebonds in alkene without using molecular hydrogen and a transition metal catalyst. For example,
Me2C=CHMeBH3
(Me2CHCHMe)3B 3 Me2CHCH2Me3 CH3COOH
THF
(iii) Selective reduction: Less hindered double bonds can be selectively reduced by
hydroborationoxidation. For example,
(CH3)2CHCH BH +
CH3
CH=CH2
Me
CH2CH2B(CHCHCH3)2
Me
CH3
CH3
H2O2/OH
CH3COOH
CH2CH2OH
Me
CH2CH3
Me
2
3.3 GRIGNARD SYNTHESIS
When a solution of an alkyl halide in dry ethyl ether, (C2H5)2O, is allowed to stand over turnings of metallic magnesium, a vigorous reaction takes place. The solution turns cloudy, beginsto boil and the magnesium metal gradually disappears. The resulting solution is known asGrignard reagent. It is one of the most useful and versatile reagents known to the organicchemists.
RX + Mg ether Dry
RMgX
Alkyl halide Alkyl magnesium halide
The Grignard reagent has the general formula RMgX , and the general name
alkyl magnesium halide. The carbonmagnesium bond is covalent but highly polar, with carbonpulling away electrons from electropositive magnesium but the magnesiumhalogen bond is
essentially ionic, R MgX.
Since magnesium becomes bonded to the same carbon that previously held halogen, the
alkyl group remains intact during the preparation of the reagent. Thus, npropyl chloride yields
npropyl magnesium chloride and isopropyl chloride yields isopropyl magnesium chloride.
8/19/2019 BT Alcohols _Theory-01_ .pdf
5/22
ALCOHOLS, PHENOLS AND ETHERS OP-CMIII-177
East Delhi Centre : Ph.: 22792226-27, West Delhi Centre : Ph.: 25527517-18, North Delhi Centre : Ph.: 25221424-25, South Delhi Centre : Ph.: 26537392-95 Fax: 26537396
CH3CH2CH2Cl + Mg ether Dry
CH3CH2CH2MgCl
nPropyl chloride nPropyl magnesium chloride
(CH3)2CHCl + Mg ether Dry
(CH3)2CHMgCl
Isopropyl chloride Isopropyl magnesium chloride
The Grignard reagent belongs to a class of compounds called organometallic compounds,in which carbon is bonded to a metal like lithium, potassium, sodium, zinc, mercury, lead, thalliumor to almost any metal known. Each kind of organometallic compound has its own set of propertiesand its particular uses depend on these. But whatever the metal, it is less electronegative than
carbon and the carbonmetal bond is always highly polar. Although the organic group is not afullfledged carbanion but has considerable carbanionic characters. Thus, organometalliccompounds can serve as a source of carbon bearing negative charge.
The Grignard reagent has the formula RMgX and is prepared by the reaction of metallicmagnesium with the appropriate organic halide. This halide can be alkyl (1°, 2°, 3°), allylic, aryl
alkyl (e.g. benzyl), or aryl (phenyl) or substituted phenyl. The halogen may be Cl, Br or I, (Arylmagnesium chlorides must be made in the cyclic ether tetrahydrofuran instead of ethyl ether). Aldehydes and ketones resemble each other closely in most of their reactions. The carbonyl group
is also unsaturated and like the carboncarbon bond, it also undergoes addition. One of the typicalreaction is cis addition of the Grignard reagent.
The electrons of the carbonyl double bond hold together atoms of different
electronegativity, thus, the electrons are not equally shared, the mobile cloud is pulled stronglytowards the more electronegative atom, oxygen. The addition of an unsymmetrical reagenthappens such that the nucleophilic (basic) portion attaches itself to carbon and the electrophilic(acidic) portion attaches itself to oxygen.
The carbonmagnesium bond of the Grignard reagent is a highly polar bond, carbon beingnegative relative to electropositive magnesium. When Grignard reagent is added to carbonylcompounds, the organic group attaches to carbon and magnesium to oxygen.
C=O + R: MgX COMgX
R
H2O COH + Mg(OH)X
R
+ +
H+
Mg2+ + X + H2O
An alcohol
The product is a magnesium salt of the weakly acidic alcohol and is easily converted intothe alcohol by the addition of the stronger acid, water. The Mg(OH)X thus formed is a gelatinousmaterial, which forms coating over carbonyl compound, thus dilute mineral acid (HCl, H 2SO4) is
commonly used instead of water, so that water soluble magnesium salts are formed.
PRODUCTS OF THE GRIGNARD SYNTHESIS:
The type of alcohol that is obtained from a Grignard synthesis depends upon the type of carbonyl compound used. Formaldehyde (HCHO) yields primary alcohols, other aldehydes(RCHO) yield secondary alcohols and ketones (R2CO) yield tertiary alcohols.
The number of hydrogens attached to the carbonyl carbon defines the carbonyl compoundas formaldehyde, higher aldehydes or ketone. The carbonyl carbon is the one that finally bears the
8/19/2019 BT Alcohols _Theory-01_ .pdf
6/22
ALCOHOLS, PHENOLS AND ETHERS OP-CMIII-178
East Delhi Centre : Ph.: 22792226-27, West Delhi Centre : Ph.: 25527517-18, North Delhi Centre : Ph.: 25221424-25, South Delhi Centre : Ph.: 26537392-95 Fax: 26537396
OH group in the product and the number of hydrogen defines the alcohol as primary, secondary,or tertiary.
For example,
CH3CH2CHCH3 + HC=O
MgBr Formaldehyde
H
CH3CH2CHCH2OMgBr H2O
CH3
CH3CH2CHCH2OH
CH3
secButyl carbinol(1°alcohol)
secbutyl magnesiumbromide
MgBr + CH3C=O CHOMgBr
CH3H2O
CHOH
CH3
Phenyl magnesiumbromide
AcetaldehydePhenylmethylcarbinol
(1Phenylethanol)
(1° alcohol)
H
nC4H9MgBr + CH3C=O Acetone
nC4H9COMgBr H2O
CH3
nC4H9COH
CH3
nButyldimethyl carbinol(3°alcohol)
CH3
nButyl magnesiumbromide
CH3 CH3
C=O + RMgX COMgX
R
H2O COH + Mg++ + X
R
HC=O + RMgX HCOMgX
R
H2OHCOH
R
H HH
(1°alcohol)
Formaldehyde
RC=O + RMgX RCOMgX
R
H2O RCOH
R
H HH
(2°alcohol)
Other aldehydes
RC=O + RMgX RCOMgX
R
H2ORCOH
R
R
(3°alcohol)
Ketone
R R
Reactivity order of the substrates with a Grignard reagent is
Active H compounds > –CHO > C=O > –COCl > –CO2R > –CH2X.
EXCEPTIONAL BEHAVIOUR OF GRIGNARD REAGENT:
Sometimes, Grignard reagent does not react with compounds containing functional groupnormally capable of undergoing reaction. Generally, branching of the carbon chain near thefunctional group prevents the reaction. For example, methyl magnesium bromide or iodide doesnot react with hexamethyl acetone (CH3)3CCOC(CH3)3. It has also been found that if Grignard
reagent contains large alkyl groups, reaction may be prevented. For example, isopropyl methyl
8/19/2019 BT Alcohols _Theory-01_ .pdf
7/22
ALCOHOLS, PHENOLS AND ETHERS OP-CMIII-179
East Delhi Centre : Ph.: 22792226-27, West Delhi Centre : Ph.: 25527517-18, North Delhi Centre : Ph.: 25221424-25, South Delhi Centre : Ph.: 26537392-95 Fax: 26537396
acetone reacts with methyl magnesium iodide but not with tbutyl magnesium iodide. In other cases, abnormal reaction may take place. For example, when isopropyl magnesium bromide isadded to diisopropyl ketone, the expected tertiary alcohol is not formed, instead the secondary
alcohol, diisopropyl carbinol is obtained resulting from the reduction of the ketone.
(CH3)2CHCOCH(CH3)2 CHMgBr )CH( 23 (CH3)2CHCH(OH)CH(CH3)2 + CH3CH=CH2
, unsaturated carbonyl compounds adds on Grignard reagents at the 1, 2 or 1, 4positions.
1, 2−addition:
R1CH=CHC=OR MgX
H3O+
R1CH=CHCOMgX
R
R2
R1CH=CHCOH
R3
R2
R2
1, 4−addition:
R1CH=CHC=OR
3MgX
H3O+
R1CHCH=COMgX
R
R1CHCH=COH
R
R2 R3
tautomerizesR1CH=CH2CR
2
OR3 R3
[enol]
The reaction of dihalides of the type Br(CH2)nBr with magnesium depends on the value of n. For n = 1, no Grignard reagent is formed. For example,
CH2CH2Mg
CH2=CH2, CH2CH2CH2ether Mg
ether
Br Br Br Br
When n 4, the Grignard reagent can be possibly made with dibromo compound i.e,Br(CH2)nBr.
ORGANOLITHIUM COMPOUNDS:
Alkyl lithium compounds can be prepared by direct displacement, the chlorides give bestyields. For example,
Bu–Cl + 2Lihexane
N2 Bu–Li + LiCl
Other organolithium compounds can be prepared by the halogenmetal exchange with thebutyl lithium compound.
BuLi + RX RLi + BuX
8/19/2019 BT Alcohols _Theory-01_ .pdf
8/22
ALCOHOLS, PHENOLS AND ETHERS OP-CMIII-180
East Delhi Centre : Ph.: 22792226-27, West Delhi Centre : Ph.: 25527517-18, North Delhi Centre : Ph.: 25221424-25, South Delhi Centre : Ph.: 26537392-95 Fax: 26537396
Organolithium compounds behave like the Grignard reagent but the lithium compounds areusually more reactive and the yield of the product is often better. Because of their sensitivity tooxygen and to water, reaction with lithium alkyls is best carried out in an atmosphere of dry
nitrogen. Alkyl lithium reacts with CO2 to give carboxylate salt.
RLi + CO2 RCO
OLi+
It has been found that sterically hindered talcohols cannot be prepared by the Grignardreaction. On the other hand, many of these alcohols can be prepared by means of lithium alkyls.For example,
(CH3)2CHCOCH(CH3)2OH
LiHC)CH(
2
23 [(CH3)2CH]3COH + LiOH
3.4 HYDROLYSIS OF ALKYL HALIDES
Alkyl halides on hydrolysis gives alcohols either by SN1 or SN2 route depending upon thestructure of alkyl halide and the reaction conditions employed.
RX + OH (or H2O) ROH + X (or HX)
3.5 REDUCTION OF CARBONYL COMPOUNDS
Aldehydes can be reduced to primary alcohols and ketones to secondary alcohols, either by catalytic hydrogenation or by the use of chemical reducing agents like lithium aluminiumhydride (LiAlH4), H2/Ni, B2H6/THF etc.
3.5.1 By LiAlH4
It can reduce all functional groups of column ‘A’ into Column ‘B’. Generally, it is unable to
reduce double bond, which are in conjugation with C=O group the double bond is reduced
when a phenyl group is attached to the carbon.
For example,
C6H5CH=CHCHO 4LiAlH C6H5CH2CH2CH2 –OH
“A” “B”
CHO CH2OH
C=O CHOH
COOH CH2OH
COOR CH2OH + ROH
COCl CH2OH
(RCO)2O RCH2OH
lactone diol
epoxide alcohol
8/19/2019 BT Alcohols _Theory-01_ .pdf
9/22
ALCOHOLS, PHENOLS AND ETHERS OP-CMIII-181
East Delhi Centre : Ph.: 22792226-27, West Delhi Centre : Ph.: 25527517-18, North Delhi Centre : Ph.: 25221424-25, South Delhi Centre : Ph.: 26537392-95 Fax: 26537396
3.5.2 By NaBH4
It can reduce all the above groups of column ‘A’ into groups of column ‘B’ except, COOH
and COOR. NaBH4 is able to reduce the double bonds, which are in conjugationwith C=O group.
3.5.3 By H2 /Ni
It can reduce all the above groups of column ‘A’ into groups of column ‘B’. It can also
reduce double and triple bond present in carbonyl compounds irrespective of the positionin carbon chain whether it is in conjugation with carbonyl group or not.
CH3CH=CHCHO Ni/H2 CH3CH2CH2CH2 –OH
CH2=CHCH2CHO Ni/H2 CH3CH2CH2CH2 –OH
3.5.4 By B2H6 /THFIt can reduce all above groups of column ‘A’ into groups of column ‘B’ except, COCl.
REDUCTION BY LiAlH4 OR NaBH4
The commonly used reagent for the reduction of aldehydes and ketones are LiAlH4 or
NaBH4. The reaction proceeds by successive transfer of hydride ions (H) from boron or aluminium
to four different carbonyl carbons. As all four of the hydrides are transferred, there are distinct
reducing agent used in every step of reduction. In the first step, the reducing agent is AlH4 (I),
while in the second step, the reducing agent is RCH2OAlH3 (II).
In the same manner, species [RCH2O]2 AlH2 (species III) and [RCH2O]3 AlH
(species IV)
will be obtained. Reduction with NaBH4 is usually done in water or in alcohol which are used as the
solvent. The solvent destroys the intermediate alkoxide ion and yields alcohol. If water or analcohol is not used as the solvent, aqueous acid can be added after the reduction to convert thealkoxide to alcohol.
The mechanism for reduction with lithium aluminium hydride is very similar to that of NaBH4. As LiAlH4 violently reacts with water and other polar protic solvents to give molecular hydrogen, reduction with LiAlH4 are done in aprotic solvents like anhydrous ether. Ethyl acetate isadded to decompose the aluminium complex. But reduction with NaBH4 can be carried out inwater or ethanol solution.
Mechanism of reduction by LiAlH4:
RCHO
H AlH3ether
RCOAlH3
H
H
RCH=O
[RCH2O]2 AlH2
RCH=O
[RCH2O]3 AlHRCH=O
RCH2O AlOCH2R
OCH2R
OCH2R
CH3CO2Et4RCH2OH + Al(OH)3
Aldehydes are reduced to primary alcohols by both LiAlH4 and NaBH4 while these reducingagents reduce ketones to secondary alcohols.
(i) OOH
HLiAlH4
8/19/2019 BT Alcohols _Theory-01_ .pdf
10/22
ALCOHOLS, PHENOLS AND ETHERS OP-CMIII-182
East Delhi Centre : Ph.: 22792226-27, West Delhi Centre : Ph.: 25527517-18, North Delhi Centre : Ph.: 25221424-25, South Delhi Centre : Ph.: 26537392-95 Fax: 26537396
(ii) Ph
OLiAlD4
H3O PhCDOH.
CH3
(iii) OOH
HNaBH4
(iv)H
O2NaBH4
O
H
OHOH
3.6 REDUCTION OF ESTERS
In chemical reduction of esters, the acid portion of ester is converted into primary alcohol.
RCOOR agentducingRe RCH2OH + ROH
For example,
CH3(CH2)8COOCH32
422
in/5000,C150
OCuCr ,CuO,H
CH3(CH2)8CH2OH + CH3OH
CH3(CH2)10COOC2H5 4LiAlH CH3(CH2)10CH2 –OH + C2H5 –OH
Carboxylic acids and esters produce alcohols by LiAlH4 but not by NaBH4.
OR
OLiAlH4
O OH
OHNaBH4
OR
OOH
ROH
4. GENERAL PHYSICAL PROPERTIES OF THE ALCOHOLS
The properties of the alcohols are largely determined by OH group. However, the alkylgroup (which is inert) also plays important role to explain some of the physical properties likeboiling point and solubility in water.
4.1 BOILING POINT
The lower members like methanol, ethanol, 1propanol have higher boiling points. Theboiling point rises as the molecular weights of the alcohol increases. It is quite evident that withinthe homologous series, the alcohols of normal chain show a rise in the boiling points with theincrease in molecular weights. Like alkanes, the branched chain isomers of alcohol have
lower boiling points. Thus among the four isomeric butyl alcohols, tbutyl has the lowest boilingpoints (80°C).
The order of boiling points of isomeric butyl alcohols is
nButyl alcohol, CH3(CH2)3OH > isobutyl alcohol, (CH3)2CHCH2OH > secbutyl
alcohol, CH3CH(OH)CH2CH3 > tbutyl alcohol, (CH3)3COH
8/19/2019 BT Alcohols _Theory-01_ .pdf
11/22
ALCOHOLS, PHENOLS AND ETHERS OP-CMIII-183
East Delhi Centre : Ph.: 22792226-27, West Delhi Centre : Ph.: 25527517-18, North Delhi Centre : Ph.: 25221424-25, South Delhi Centre : Ph.: 26537392-95 Fax: 26537396
Compactness of tbutyl alcohol reduces the surface area and hence lowers the boilingpoint. The boiling point of alcohols are much higher than alkanes of comparable molecular weights. The high boiling point of the alcohols is due to hydrogen bonding by which the alcohol
molecules remain associated in the liquid state.
HO HO HO HO
R R R R
The hydrogen of one (OH) group forms a loose bond with the oxygen of OH group of
another molecule i.e. they remain in the molecular association through inter molecular hydrogenbonding, which accounts for their high boiling points. But the hydrogen bonding is not so extensiveas in water molecules. So, water boils at a higher temperature than methyl and ethyl alcohols.
4.2 SOLUBILITY IN WATER
The lower members of alcohols are highly soluble in water but as the size of the alkyl groupincreases, the solubility decreases. This phenomenon is common with other organic compoundshaving atleast one electronegative atom or group like ethers, aldehydes, ketones, acids, amides,sugars etc. and they all are soluble in water. The solubility of alcohols is attributed to its ability toform hydrogen bonds with water.
RO HO
H H
+
But as the molecular weight increases, the solubility decreases. For example, methanol is
infinitely soluble but only 0.6 g of nhexyl alcohol dissolves in 100 ml of water. In general, organiccompounds having atleast one electronegative element become gradually insoluble in water as the
hydrocarbon chain increases. However, branching of the alcohol increases the solubility.Thus, tbutyl alcohol is infinitely soluble but 1butanol is slightly soluble in water. This is again dueto the compactness of the molecule. Better and easy surrounding by water increases thesolubility. Increase in the number of OH groups increases the solubility. For example, glycol(two OH groups) and glycerol (three OH groups) are more soluble in water than methanol andethanol.
5. GENERAL CHEMICAL PROPERTIES OF THE ALCOHOLS
Chemical reactions are mainly based on OH group of alcohol. The oxygen atom of OH
group polarize both the CO bond and the OH bond of any alcohol. Polarization of the OH bondmakes the hydrogen partially positive and explain why alcohols are weak acids. Polarization of theCO bond makes the carbon atoms partially positive. The polarization of CO bond is responsiblefor the weak basic character of alcohols.
On the basis of the above explanation of polarization of CO and OH bonds, we canclassify the reaction of alcohols into two parts, first due to breaking of the CO bond, with removalof OH group and second due to the breaking of OH bond, with removal of ‘H’. Except thesereactions, alcohols show some other reactions like oxidation, reduction, elimination etc. Alkylgroup of alcohols is also responsible for some chemical reactions.
8/19/2019 BT Alcohols _Theory-01_ .pdf
12/22
ALCOHOLS, PHENOLS AND ETHERS OP-CMIII-184
East Delhi Centre : Ph.: 22792226-27, West Delhi Centre : Ph.: 25527517-18, North Delhi Centre : Ph.: 25221424-25, South Delhi Centre : Ph.: 26537392-95 Fax: 26537396
5.1 REACTION DUE TO O−H BOND CLEAVAGE
5.1.1 REACTION WITH ALKALI METALS:
Active metals (Na, K, Mg, Al etc) when treated with alcohols give hydrogen gas. In thisreaction, order of reactivity of alcohols is CH3OH > 1° > 2° > 3°. This reaction exhibitsacidic character of alcohols.
ROH + Na RONa+ + ½ H2
In OH group of alcohols, oxygen is more electronegative than hydrogen, this results inpolarization of OH bond due to which acidic nature arises in alcohols. Reaction of activemetals with alcohols shows that alcohols are acidic in nature.
RONa+ + HOH NaOH + ROHStronger Stronger Weaker Weaker
base acid base acid
The order of acidity for some compounds is
H2O > ROH > HCCH > NH3 > RH
The order of basicity is
R > 2NH > HCC > OR > OH
The above order is based on the reactions of alcohols with other species.
C2H5OH + Na C2H5O Na
+ ½ H2
HCCNa+ + ROH HCCH + RONa+
5.1.2 ESTERIFICATION:
A direct reaction between a carboxylic acid and alcohol under the catalytic effectof sulphuric acid yields an ester. This is a reversible reaction and is known as the”Fischer esteri f icat ion ”.
RCO
OH
FastRC
OH
+ H+
OH
RC
OH
OH:
..
RC
OH
OH ..Ia
..:
Slow RC O
OH
OH
RCOR
OH2
OH
RC
OH
OH
OH:
R
IMPEHR
..
+
Ib
..
..
: ..
..
H+
RCOR
OH
RCOR
H2O
Fast
..:
RCOR
O OH..
8/19/2019 BT Alcohols _Theory-01_ .pdf
13/22
ALCOHOLS, PHENOLS AND ETHERS OP-CMIII-185
East Delhi Centre : Ph.: 22792226-27, West Delhi Centre : Ph.: 25527517-18, North Delhi Centre : Ph.: 25221424-25, South Delhi Centre : Ph.: 26537392-95 Fax: 26537396
5.2 REACTIONS DUE TO C−O BOND CLEAVAGEPolarization of the CO bond makes the carbon atom partially positive, so this carbon
would be susceptible to the nucleophilic attack and if it were not for the fact that OH is a strongbase and they are very poor leaving group. Protonation of the alcohol converts a poor leaving
group (OH) into a good one. It also make the carbon atom even more positive (because 2OH is
more electron withdrawing than OH) and therefore, even more susceptible to nucleophilic attack.Now, nucleophilic substitution reactions are possible in alcohols according to the givenmechanism.
5.2.1 REACTION WITH H−X:
For example,
CH3CHCH3Conc. HBr
OHor (NaBr + H2SO4)
Isopropyl alcohol
CH3CHCH3
Br
Isopropyl bromide
CH3CH2CH2CH2CH2OHConc. HCl / ZnCl2
CH3CH2CH2CH2CH2Cl
npentyl alcohol npentyl chloride
CH3CCH3Conc. HCl
OH
CH3
CH3CCH3
Cl
CH3
tert Butyl alcohol tert Butyl chloride
In SN1 reactions of alcohol (when R group is 3°), R may rearrange. Primary alcohols and
methanol apparently react through a mechanism that we recognize as an SN2 type.
With HBr, alcohols produce alkyl bromide.
ROH + H.. ROH2
..
Br
Slow
SN2Br R+ H2O
or for stable carbocation R
, racemic mixture will be obtained for optically active alcohol bySN1 mechanism.
But 3pentanol reacts with HBr to produce 2 and 3bromopentane derivatives.
CH3CHCHCH2CH3
H OH
H
CH3CHCHCH2CH3
H OH2
CH3CHCHCH2CH3
H
CH3CHCH2CH2CH3
I (More +I groupsattached to C
+)
Br CH3CH2CHCH2CH3
Br
(II a)
Br CH3CHCH2CH2CH3
(II b)II (More members of hyperconjugation structure)
Br
In SNi reaction, retention of configuration is observed & mechanism operates through
intimate ionpair formation.
8/19/2019 BT Alcohols _Theory-01_ .pdf
14/22
8/19/2019 BT Alcohols _Theory-01_ .pdf
15/22
ALCOHOLS, PHENOLS AND ETHERS OP-CMIII-187
East Delhi Centre : Ph.: 22792226-27, West Delhi Centre : Ph.: 25527517-18, North Delhi Centre : Ph.: 25221424-25, South Delhi Centre : Ph.: 26537392-95 Fax: 26537396
3C6H5CHCH3PBr 3
OH
3C6H5CHCH3 + H3PO3
Br
5.2.3 REACTION WITH SOCl2:
Alcohols react with thionyl chloride in presence of pyridine to give alkyl chloride withinverted configuration, while in absence of pyridine, an alkyl chloride with retention of configurationis obtained via SNi mechanism.
ROH + SOCl2 RCl + SO2 + HCl
5.2.4 ACID CATALYSED DEHYDRATION OF ALCOHOLS:
Alcohols in presence of dilute acid undergo dehydration forming alkenes. The reactionproceeds by E1 mechanism.
H
CH2OH..
CH2OH2 H
H
CH2
Dehydration of cyclic alcohol is accompanied by expansion in the above reaction. Stability of the ring is given by Baeyer strain theory, according to which the stability order of the rings is6 > 7, 5 > 8, 9 >> 4 > 3 .
5.3 OXIDATION OF 1°, 2°, 3° ALCOHOLS WITH CrO3 OR K2Cr 2O7 IN ACID
Alcohols with atleast one hydrogen atom on 1° and 2° carbinol are oxidised to carbonylcompounds (aldehydes and ketones). PCC (Mixture of pyridine, HCl and CrO3) oxidises 1° alcoholto aldehydes but K2Cr 2O7 or KMnO4 in acid converts 1° alcohol directly to carboxylic acids. Under
mild conditions, 3° alcohols are not oxidised.
Jone’s reagent (chromic acid in aqueous acetone solution). This is a sufficiently mildoxidising agent, so that it oxidises alcohols without oxidising or rearranging double bonds. MnO2can oxidise 1° allylic or 1° benzylic alcohols selectively into aldehydes.
For example,
CH3 –CH=CH–CH2OHacetonein
CrOH 42 CH3 –CH=CH–CH=O
H MnO2
OHO
CH2OHMnO2
CH=O
CHROMIC ACID (JONES REAGENT)
The most convenient reagent for the oxidation of alcohols is 8N chromic acid in sulphuricacid (Jones reagent). Two millimoles of this reagent oxidizes 3 millimoles of monohydric alcoholaccording to the equation:
3R2CHOH + 2H2CrO4 3R2C=O + 2Cr(OH)3 + 2H2OThe function of sulphuric acid is to prevent complex formation of Cr(VI) with its reduced
form Cr (III) to a salt having much less oxidation potential. This ensures that all the Cr( VI) is usedin oxidation, which thus becomes rapid and complete. Acetone is the usual solvent used at ice
8/19/2019 BT Alcohols _Theory-01_ .pdf
16/22
ALCOHOLS, PHENOLS AND ETHERS OP-CMIII-188
East Delhi Centre : Ph.: 22792226-27, West Delhi Centre : Ph.: 25527517-18, North Delhi Centre : Ph.: 25221424-25, South Delhi Centre : Ph.: 26537392-95 Fax: 26537396
bath temperature. Alcohols having double or triple bonds in the molecule can be selectivelyoxidized to ketones in good yields. For example,
CH3(CH2)3CCCH – CH3 CH3(CH2)3CCC – CH3
OH O
The most likely mechanism for the oxidation of alcohols by Jones reagents has been shownto be
R2CHOH + Cr 6+ R2C=O + Cr
4+ + 2H+
Cr 4+ + Cr 6+ 2Cr 5+
3Cr 5+ + 2R2CHOH 2R2C=O + 2Cr 3+ + 4H+
3R2CHOH + 2Cr 6+ 3R2C=O + 2Cr
3+ + 4H+
Thus, apparently, 3 moles of alcohols react with 2 moles of Cr(VI) to give 3 moles of ketone and 2 moles of Cr(III). It is clear, however, that only one mole of the alcohol is oxidizeddirectly by Cr(VI) and the other two part in the oxidation with Cr (V).
5.4 CLEAVAGE OF 1, 2−GLYCOLS
Lead tetraacetate or periodic acid are commonly used for the cleavage of 1, 2glycols.The former reagent is used in anhydrous solvent, whereas the later in organic solvent. Periodic
acid is more selective and readily cleaves 1, 2glycols at room temperature. But cleavage of an hydroxy ketone or acid by this reagent even at higher temperature is slow. Lead tetraacetate,however, oxidizes hydroxyketone or acid as well as 1, 2glycols more easily. This is explainedon the basis of a fivemembered cyclic intermediate.
C
CI
O
O
O
O
OH
C O + C O
C
CPb(OAc)2
O
O
C O + C O
A 1, 2glycol need not necessarily be cis to undergo cleavage with lead tetraacetate.For instance, trans9, 10decalindiol undergoes cleavage to cyclodecane1, 6dione.
OH
OH
Pb(OAc)4OO
5.5 HALOFORM REACTIONThe general reaction is represented as
RCHCH3 + X2 + NaOH
OH
RCO Na + CHX3 + NaX + H2O
O
8/19/2019 BT Alcohols _Theory-01_ .pdf
17/22
ALCOHOLS, PHENOLS AND ETHERS OP-CMIII-189
East Delhi Centre : Ph.: 22792226-27, West Delhi Centre : Ph.: 25527517-18, North Delhi Centre : Ph.: 25221424-25, South Delhi Centre : Ph.: 26537392-95 Fax: 26537396
The CH3 carbon is lost as CHX3 and the remaining part exists as acid salt, which can beacidified to liberate free acid.
The structural feature essential in the compound to show haloform reaction is that any of
the following moieties should be present in the molecule attached to some electronwithdrawinggroup or electron donating group by +I only.
CH3CH or XCH2CH or X2CHCH or X3CCH
OH OH OH OH
CH3C or
O
XCH2C or
O
X2CHC or
O
X3CC
O
or any other grouping that can be converted to any of the above moieties.
The mechanism of the reaction can be outlined as:
The reaction has 3 important steps. Step I is the oxidation, caused by mild oxidizing agent
(hypo halite ion). The second step is basepromoted halogenation and the third step is cleavageof C–C bond.
RCHCH3
OH
RCO + CHI3
O
OI
(Oxidisingagent)
RCCH3O
OH
RCCH2O
..
Carbanion I(Resonance stabilized)
I I+
IRCCH2I
O
RCHCH2I
OH
OH
RCCHI
O
..
Carbanion II(more resonance stabilized
due to I effect of iodine)
II I
+
RCCHI2O
OI
OI
RCHCHI2
OH
I2/OH
RCCI3O
OI
RCHCI3
OHOH
RCCI3O
RCOH + CI3
O
..
Protonexchange
OH
Yellow crystalline ppt.
(M.P = 119°C)
I2 + 2OH – I – + OI – + H2O
H2O
Some of the compounds which responds positively to iodoform test are
CH3CH2OH (only primary alcohol)
CH3CHCH3
OH,
CH3CHCH2CH3
OH,
PhCHCH3OH
(secondary alcohols)
CH3CH
O(only aldehyde) ,
CH3CCH3O
,CH3CCH2CH3
O,
PhCCH3O
(ketones)
8/19/2019 BT Alcohols _Theory-01_ .pdf
18/22
ALCOHOLS, PHENOLS AND ETHERS OP-CMIII-190
East Delhi Centre : Ph.: 22792226-27, West Delhi Centre : Ph.: 25527517-18, North Delhi Centre : Ph.: 25221424-25, South Delhi Centre : Ph.: 26537392-95 Fax: 26537396
CH3CHCH3X
,
CH3CCH3X
X
,
CH3CCH2CCH3O O
,
CH3COEt
O(after heating with OH –)
CH3CCH2CO2H
O
(after heating)
The compounds that respond negatively to iodoform test are
CH3COH
O,
CH3CCl
O,
CH3CNH2O
,CH3COR
O,
CH3COCCH3O O
CH3CCH2COH
O O
,CH3CCH2COEt
O O
Give a simple chemical test that can distinguish between 2–pentanol and 3–pentanol.
6. METHODS FOR DISTINGUISHING PRIMARY, SECONDARY ANDTERTIARY ALCOHOLS
The following methods are used for distinguishing three types of monohydric alcohols.6.1 LUCAS TEST
Alcohols react with concentrated hydrochloric acid in the presence of anhydrous zincchloride to form alkyl chlorides. The alkyl chlorides appear as cloudiness because of itsinsolubility in Lucas reagent.
ROH + HCl 2ZnCl
RCl + H2O Alkyl halide
The three types of alcohols undergo this reaction at different rates. The rates of reactionwith Lucas reagent [conc. HCl + ZnCl2 (anhydrous)] follow the given order:
Tertiary alcohol > Secondary alcohol > Primary alcohol
An unknown alcohol (monohydric) is mixed with conc. HCl and anhydrous ZnCl2 at roomtemperature. The alkyl chloride formed is insoluble in the medium, thus the solutionbecomes cloudy before it separates out as a distinct layer. The following observations aremade,
(a) If cloudiness (white turbidity) appears immediately, the alcohol is tertiary.
(b) If cloudiness appears within 5 minutes, the alcohol is secondary.
(c) If the solution remains clear, i.e., no cloudiness is formed the alcohol is primary.
Remember that the benzyl and allyl alcohol react as rapidly as tertiary alcohol with Lucasreagent because their cations are resonance stabilised and as stable as 3° carbocations.
8/19/2019 BT Alcohols _Theory-01_ .pdf
19/22
ALCOHOLS, PHENOLS AND ETHERS OP-CMIII-191
East Delhi Centre : Ph.: 22792226-27, West Delhi Centre : Ph.: 25527517-18, North Delhi Centre : Ph.: 25221424-25, South Delhi Centre : Ph.: 26537392-95 Fax: 26537396
Can Lucas test distinguish CH 3CH 2 –OH, PhCH 2 –OH and Me3C–OH ? Explain.
6.2 DICHROMATE TEST (OXIDATION TEST)
This test is based on the fact that three types of monohydric alcohols give differentoxidation products on oxidation.
The unknown alcohol is treated with sodium dichromate in dilute sulphuric acid(orange solution) at room temperature. Then the oxidation products are identified.
(i) A carboxylic acid with same number of carbon atoms as in the alcohol, if formedconfirms the primary alcohol. The colour of the solution changes from orange to green.
(ii) A ketone with same number of carbon atoms as in the alcohol if formed confirms thesecondary alcohol. The colour of the solution also changes from orange to green.
(iii) In case the colour of the solution does not change, i.e. it remains same, then it is
3° alcohol.
6.3 VICTOR MEYER’S TEST
In this test, the following steps are involved,
(i) Alcohol is reacted with conc. HI or red phosphorous and iodine to form correspondingalkyl iodide.
(ii) Alkyl iodide is then treated with silver nitrite when corresponding nitroalkanes is formed.
(iii) Nitro alkane is treated with nitrous acid (NaNO2 + H2SO4) and the solution is madealkaline by addition of excess of caustic soda.
Primary Secondary Tertiary
RCH2OH
HI
RCH2I
AgNO2
RCH2NO2
HNO2
RCNO2
NaOH
NOH
Blood red colour
Nitrolic acid
R2CHOH
HI
R2CHI
AgNO2
R2CHNO2
HNO2
R2CNO2
NaOH
N=O
Blue colour
Nitrolic acid
R3COH
HI
R3CI
AgNO2
R3CNO2
HNO2
No reaction
NaOH
Colourless
8/19/2019 BT Alcohols _Theory-01_ .pdf
20/22
ALCOHOLS, PHENOLS AND ETHERS OP-CMIII-192
East Delhi Centre : Ph.: 22792226-27, West Delhi Centre : Ph.: 25527517-18, North Delhi Centre : Ph.: 25221424-25, South Delhi Centre : Ph.: 26537392-95 Fax: 26537396
8/19/2019 BT Alcohols _Theory-01_ .pdf
21/22
ALCOHOLS, PHENOLS AND ETHERS OP-CMIII-193
East Delhi Centre : Ph.: 22792226-27, West Delhi Centre : Ph.: 25527517-18, North Delhi Centre : Ph.: 25221424-25, South Delhi Centre : Ph.: 26537392-95 Fax: 26537396
PROFICIENCY TEST− I
The following 10 questions deal with the basic concepts of this section. Answer thefollowing briefly. Go to the next section only if your score is greater than or equal to 8.Do not consult the study material while attempting the questions.
1. If 1° alcohol is oxidised by PCC, which product do you expect?
2. If 3° alcohol is oxidised by K2Cr 2O7 in mild condition, will it be oxidised?
3. Will tbutanol respond to haloform test?
4. R1R2R3COH 2SOCl
(A).
The product (A) will have of configuration.
5. ROH 3OCH
(A)
Will (A) be ether?
6. Dehydration of alcohol always leads to Saytzeff/Hoffman product.
7. CH2CH2CH2Cl
14OH
O
Product mixture
18
In the product mixture, do you expect the product which will have O18 linked with C14 ?
8. Which one is a strong base, CH3O or OH ?
9. Which can replace the other one between OTs , OCH3 ?
10. Alcohols contain bond among them.
8/19/2019 BT Alcohols _Theory-01_ .pdf
22/22