PVC-UE Roofline, Window & Cladding Systems
Rainwater Systems
Soil & Waste Systems
Underground Drainage Systems
building the future
FloPlast LimitedCastle RoadEurolink Business ParkSittingbourneKent ME10 3FPUK
Tel: 01795 431731
Sales Office Direct Line:
01795 421422Fax:
01795 431188E-mail:[email protected]
Website:www.floplast.co.uk
01/03/07
Other systems available
PVC-UE Roofline, Window & Cladding Systems
PVC-U Rainwater Systems
Underground Drainage Systems
‘Alprene’ Compression Fittings for MDPE
Stockist Details
www.floplast.co.uk
building the future
PVC-UE Roofline, Window & Cladding Systems
Rainwater Systems
Soil & Waste Systems
Underground Drainage Systems
Soil & Waste Systems
2 www.floplast.co.uk
INTRODUCTION
Introduction
FloPlast, founded in 1991, hasestablished itself as a manufacturer of highquality plastic building and plumbingsystems for the construction industry, inparticular domestic new build andrefurbishment projects.
FloPlast offer a comprehensive choice ofsystems and products, in a range of sizesand colours, to suit all tastes andapplications.
The FloPlast reputation for technicalexcellence, quality and competitively pricedproducts have established the company asa leading supplier of Above GroundPlumbing Systems.
HIGH QUALITY SOIL & WASTE SYSTEMS
HIGH QUALITY UNDERGROUND DRAINAGE SYSTEMS
Soil & Waste Systems� 110mm Ring Seal Soil System
PVC-U BS EN 1329-1:2000.
� 110mm Solvent Weld Soil SystemPVC-U BS EN 1329-1:2000.
� 110mm Access Fittings BS 4514:2001.
� Air Admittance Valves BBA Certificate No. 06/4343 and BS EN 12380:2002.
� W.C Pan Connectors Polypropylene (PP) BS 5627:1984.
� Push-Fit Waste System Polypropylene (PP) BS EN 1451-1:2000.
� ABS Solvent Weld Waste SystemBS EN 1455 -1:2000.
� MuPVC Solvent Weld Waste System5255/BS EN 1566 -1:2000.
� “Unicom” Universal CompressionWaste System BS 5254/BS EN 1451.
� Waste Traps BS EN 274.
� 21.5mm Overflow Waste System BS 6700.
Further guidance should also besought by reference to:
� BS EN 12056:2000Gravity Drainage Systems inside Buildings.
� BS 8000 -13:1989 Workmanship onbuilding sites. Code of practice for above ground drainage and sanitary appliances.
The Building Regulations 2000
� Approved Document H -Drainage and Waste Disposal:2002.
� Approved Document B - Fire Safety:2000.
System Features� Comprehensive, integrated and modern
range of products and systems for all soil and waste applications.
� Components have a consistent high -gloss finish and colour and areessentially maintenance free.
� Tough and durable, yet lightweight forease of installation.
� Compatible with most other existingmaterials and systems manufactured toBritish/European Standards.
� Manufactured to British/EuropeanStandards specification whereapplicable.
� Colour matching between systems facilitates colour co-ordination where sanitary pipework is located externally.
Standards/Quality Control
FloPlast operate a quality management system which has beenassessed by BSI and complies with therequirements of BS EN ISO 9001:2000Certificate No. FM 501414.
All products are subject to continuousquality control procedures and productsmanufactured to British StandardSpecifications are marked accordingly.
Working Temperature
Soil and Waste systems may be used tocarry liquids when subjected to a continuousflow, with a maximum temperature of 76°C.Intermittent discharges of up to 100°C mayoccur, provided that a duration of less thantwo minutes is observed.
Pipework support (BS EN 12056:2000)Maximum distances for support
Vertical Horizontal
32mm 1.2m 0.5m
40mm 1.2m 0.5m
50mm 1.2m 0.6m
110mm 2m 1m
3www.floplast.co.uk
AIR ADMITTANCE VALVES BS EN 12380
Valve Open (Negative pressure in pipework)
Valve Closed (Normal working conditions)
Positive pressure
VALVE BODYBS EN 1329 -1:1999
NEGATIVE PRESSURE
DIAPHRAGMSEAL BS2494:1986
DIAPHRAGMSEAL CARRIER
82MM/110MM SOIL PIPE
COVER SEALBS2751: 2001
Certification and Standards� Product is A1 approved in accordance
with BS EN 12380 - it can be installed below the flood level of connected applicances.
� Tested and approved for use in installations varying between -20° & +60°c (no insulation required).
� CE marked to level 4 attestation of conformity in accordance with BS EN 12380.
� FloPlast air admittance valves are kitemark licenced in accordance with BS EN 12380:2002 licence number KM 512474.
� British Board of Agrément (BBA) approved 06/4343.
General Information
The FloPlast Air Admittance Valve is designed to allow the free entry of air intothe sanitary pipework system without theescape of foul gasses into the building.
When installed into sanitary pipeworksystems conforming to BS EN 12056:2000, the FloPlast AirAdmittance Valve not only prevents the loss of water from trap seals due to induced siphonage but also has the added advantage of providing anearly warning indicator to a potentialdrainage blockage. The AF110 Push-fit Air
Admittance Valve may also be used asa secondary rodding point to
remove such blockages.
All Valves should bestored in an uprightposition.
It is recommended thatair admittance valvesare not used externally
as evironmental debriswill affect the air tightnessperformance of the valve.
AF32; 32mm, 40mm and 50mm AirAdmittance Valves are produced from whiteABS/PVC, and are designed for use withwaste pipe conforming to British/Europeanstandards connected by a solvent cementpipe adaptor supplied with the product.
Approved Document H of the Building Regulations only permits Air AdmittanceValves that conform to BS EN 12380.
Ventilation and access must be provided toall air admittance valve installations.
Further detailed information on FloPlastAir Admittance Valves is available from thedetail sheet accompanying the BBAAgrement Certificate No. 06/4343.
CLOSED
www.floplast.co.uk4
5www.floplast.co.uk
Black GreyWhite
AV32 AF32 AV110 AF110
AF32Air Admittance Valve Solvent
Air Admittance Valve Compression
CODE SIZEAV32 32mmWhite
AV40 40mmWhite
AV50 50mmWhite
Air Admittance Valve Solvent
CODE SIZEAF32 32/40/50mmWhite
(Universal adaptor to fit 32mm/40mm/50mm Solvent Waste Pipe)
Air Admittance Valve Solvent
CODE SIZEAV110 110mm
Grey/Black/WhiteSolvent
Air Admittance Valve Push Fit
CODE SIZEAF110 110mm
Grey/Black/White
Remove seal from 110mm push fit for 82mm solvent connection
32mm DIAMETER DISCHARGE PIPE
40mm DIAMETER DISCHARGE PIPE
110mmDIAMETER DISCHARGE PIPE
AV110 AIR ADMITTANCE VALVETW472APPLIANCEHALF TRAP
TB33 BOTTLE TRAP
Typical Domestic Discharge SystemMaximum 5 floorsMaximum 2 groups of appliances per floor
40mm DIAMETERDISCHARGE PIPE
TSB42SHALLOW
BATH TRAP
Advantages and Benefits� Saves the need to penetrate the outer
roof shell, giving more aesthetic roof lines.� Saves on the cost of pipes and
expensive fittings.� Saves on roof flashing.� Saves on labour costs.
� Prevents the loss of water from trap seals and consequent release of foul air into the building.
� Secondary rodding point.
AF32AIRADMITTANCEVALVESOLVENT
www.floplast.co.uk
Fixing Guide
Install and test system in accordance with BSEN 1610:1998.
� Commence the stack from the base andwork up. Mark the position of brackets anddrill and fix screws before erecting thestack.
� Fix pipe or socket brackets at maximum2m centres vertical and at maximum 1mcentres horizontal.
� An allowance for expansion should bemade by withdrawing all pipe and fittingspigots from sockets by 10mm. Soil Fittings with spigot ends can be insertedinto the socket to depth marks engraved on the spigot to ensure correct allowanceis made for expansion. Expansion jointsshould be incorporated every 4m.
� The use of silicone lubricant on all sealswill facilitate jointing.
� The system should incorporate suitable access points to enable testing and maintenance of the system.
6 www.floplast.co.uk
110mm RING SEAL SOIL SYSTEM BS EN 1329 - 1:2000/BS 4514:2001
FIRE COLLARAPPLICATIONUsed to seal PVC-Upipes as they passthrough cavity wallsand floors. In a firethe intumescent liningreacts to extremeheat and willexpand and block apotential fire path.
SP101 STRAIGHT WCCONNECTOR
SP440 OFFSET BEND
FCIIO FIRE PROTECTION COLLAR
SP230921⁄2˚ DOUBLEBRANCH
SP319 STRAP ON BOSS
SP82 PIPE CLIP
Solvent Weld Connection to ABSand MuPVC Solvent Weld Waste
Straight Push-fit Connection to Push-fit Waste or Solvent Weld Waste
32mm 40mm 50mm
SP22 + WS38 SP22 + WS39 SP22
SP22 + MU38 SP22 + MU39 SP22
SP10 SP11 SP12
BOSS ADAPTORS
ABS
MuPVC
SP560ADJUSTABLE BEND 0-90°
The above drawings are forillustrative purposes only. For detailed illustrationadvice please contact your local stockist.
6 www.floplast.co.uk
SP302 VENT TERMINAL
SP83 SOCKET CLIP
SP274ACCESS PIPESOCKET/SPIGOT
SP435 OFFSET BEND
SP320 WEATHERING SLATE
AV40 AIRADMITTANCEVALVE
SP581 BOSS PIPESOCKET/SPIGOT
SP300 WEATHERING COLLAR
*White Black Grey
The FloPlast Air Admittance Valve is designedto allow the free entry of air into the sanitarypipework system without the escape of foulgases into the building. Sizes: 32mm to110mm.
AV110 AIR ADMITTANCE VALVE
110mm Pipe and FittingsPipe-Plain Ended
CODE SIZESP1* 3m
SP2 4m
Pipe-Single Socket-CODE SIZESP3* 3m
SP4 4m
Brackets
CODEPipe Clip SP82*
Socket Clip SP83
Pipe Couplings
CODEDouble Socket SP105*Single Socket SP124*
Soil Pipe Bends
CODE921/2° Bend SP161*
(Socket/Spigot)
921/2° Bend SP561*(Double Socket)
1121/2° Bend SP162(Socket/Spigot)
135° Bend SP163*(Socket/Spigot)
Adjustable Bend 0-90°
CODESP560
(PP - Do not solvent weld)
Offset Bends
CODE135° Top SP440*
135° Bottom SP435*Soil Pipe Branches
CODE
921/2° Branch SP190*
1121/2° Branch SP200
135° Branch SP210
921/2° Double SP230Branch
Access Fittings
CODE
921/2° Access SP169*Bend
921/2° Access SP502Branch
Screwed Access SP292Cap
Socket Plug SP296*Access Pipe
(Socket/Spigot) SP274*Access Pipe
(Socket/Solvent Socket) SP275
Bosses/Manifold
CODEBoss Pipe SP581
(Socket/Spigot)
Boss Pipe SP582(Socket/Solvent Socket)
Boss Hole Cutter HC5454mm
Short Boss Pipe SP583*
Strap Boss SP319*Soil Manifold SP588
(One open boss)32/40/50mm connections
Terminal Fittings
CODEWeathering Collar SP300
Vent Terminal SP302*Extract Cowl SP310
457x457mmWeathering Slate SP320
Boss Adaptor - Rubber (Push Fit)
CODE SIZESP10 32mm
SP11 40mm
SP12 50mm
Solvent Boss Adaptor
CODE SIZESP20 32mm
SP21 40mm
SP22 50mm
Reducers
CODE110x50mm SP95
Waste#
110x68mm SP96Rainwater
110x82mm Soil SP97(Grey only)
Universal Waste D95Adaptor
(32/40/50)
Universal D96Rainwater
Adaptor (Sq/Rd)
80x110mm Adaptor D97
#To reduce to 32mm or 40mm waste useMU39 or MU40 respectively
Drain Connector
CODESP107
Universal Pipe Connector
CODESP140
Adapts to Soil/Clay/CI/Drainage
Fire Protection Collar
CODE SIZEFC110 110mm
(FC50, FC82 and FC160 available to order)
Fire Wrap
CODEFW110
Fits 110mm pipe
7www.floplast.co.uk
8 www.floplast.co.uk
110mm SOLVENT SOIL SYSTEM PVC-U BS EN 1329 - 1:2000, BS 4514:2001
SOIL-WC CONNECTORS BS EN 1329 - 1:2000, BS 5627
Olive GreyBlack
For additional items to complement Solvent Soil System please see page 7, Ring Seal Soil System.
Pipe-Plain Ended
CODE3m SS1
4m SS2
Brackets
CODEPipe Clip SS82
Socket Clip SS83
Pipe Couplings
CODEDouble Socket SS106
Expansion Coupling SS107
Offset Bends
CODETop SS440
Bottom SS435
Soil Pipe Bends
CODE921/2° Bend SS561
(Double Socket)
135° Bend SS563(Double Socket)
90° Bend SS168(Spigot/Socket)
250mm Extension
CODESP104
Flexible
CODESP106
14° Connector
CODESP108
Swan Neck
CODESP100
Straight
CODESP101
Offset
CODESP102
90° Bend
CODESP103
A full range of horizontal pan connectors areavailable for use with WCs as specified in BS 5627:1984. Made in polypropylene they aresupplied with an integral sealing diaphragmwhich allows for up to 5° misalignment in any direction.
White
Soil Pipe Branches
CODE921/2° Branch SS191
(Triple Socket)
135° Branch SS211(Triple Socket)
Vent Terminal
CODEVent Terminal SS302
Bosses
CODEShort Boss Pipe SS583
Strap Boss SS319
32mmBoss Adaptor SS20
42mmBoss Adaptor SS21
Access Fittings
CODEAccess Pipe SS275
(Double Socket)
Screwed Access Cap SS292
921/2° Access Bend SS569(Double Socket)
921/2° Access Branch SS503(Triple Socket)
9www.floplast.co.uk
WASTE TRAPS BS EN 274
Traps to BS EN 274 are manufactured in whitehigh temperature polypropylene withcompression type outlets that fit plastic andcopper waste pipes 32mm/11⁄4” and 40mm/11⁄2”.
P Trap 38mm Seal
CODE SIZETP33 32mm
TP43 40mm
P Trap 76mm Seal
CODE SIZETP37 32mm
TP47 40mm
S Trap 38mm Seal
CODE SIZETS33 32mm
TS43 40mm
S Trap 76mm Seal
CODE SIZETS37 32mm
TS47 40mm
Telescopic P Trap 76mm Seal
CODE SIZETP47T 40mm
Shallow Bath Trap
CODE SIZETSB42 40mm
With cleaning eye & 20mm seal
Low Level Bath Trap 50mm Seal
CODE SIZETLB45 40mm
With cleaning access for overflow
Washing Machine Trap
CODE SIZETW471 40mm
With 600mm stand pipe & 2 clips
Appliance Half Trap 76mm Seal
CODE SIZETW472 40mm
TW473 40mm
TW474 40mm
Bottle Trap 38mm Seal
CODE SIZETB33 32mm
TB43 40mm
Bottle Trap 76mm Seal
CODE SIZETB37 32mm
TB47 40mm
Anti Vac Bottle 76mm Seal
CODE SIZETB37A 32mm
TB47A 40mm
Telescopic Bottle Trap 76mm Seal
CODE SIZETB37T 32mm
TB47T 40mm
Plain Swivel Elbow
CODE SIZEWC26 32mm
WC27 40mm
Appliance Trap Adaptor
CODE SIZETWT41 40mm
Overflow & Hose Connector
CODE SIZETHC41 40mm
Telescopic Pedestal Trap 76mm Seal
CODE SIZETD372T 32x32mm
TD374T 32x40mm
Patent No. GB2362658Reg.Design No. 2092016
Shower Trap
CODE SIZETH41 40x19mm
(Plastic Grid)
TH43 40x19mm(Chrome Grid)
TH51 40x50mm(Plastic Grid)
TH53 40x50mm(Chrome Grid)
White
10 www.floplast.co.uk
WASTE SYSTEMS
3m Wastepipe
CODE SIZEWS01# 32mm
WS02# 40mm
WS03 50mm
Straight Coupling
CODE SIZEWS07# 32mm
WS08# 40mm
WS09 50mm
90° Bend
CODE SIZEWS10# 32mm
WS11# 40mm
WS12 50mm
921⁄2° Bend
CODE SIZEWS14 32mm
WS15 40mm
WS16 50mm
135° Bend
CODE SIZEWS18# 32mm
WS19# 40mm
WS20 50mm
Tee
CODE SIZEWS22# 32mm
WS23# 40mm
WS24 50mm
90° Conversion Bend
CODE SIZEWS26# 32mm
WS27# 40mm
WS28 50mm
135° Conversion Bend
CODE SIZEWS76 32mm
WS77 40mm
Access Plug
CODE SIZEWS30# 32mm
WS31# 40mm
WS32 50mm
Pipe Clip
CODE SIZEWS34# 32mm
WS35# 40mm
WS36 50mm
Reducer
CODE SIZEWS38# 40x32mm
WS39 50x32mm
WS40 50x40mm
135° Branch
CODE SIZEWS42* 32mm
WS43 40mm
Level Invert Reducer
CODE SIZEWS50* 40x32mm
921⁄2° Cross Tee
CODE SIZEWS58* 40mm
Tank Connector
CODE SIZEWS60 32mm
WS61 40mm
Adaptors
CODE SIZEMale WS63* 32mm
WS64* 40mm
WS66* 32mm
Female WS67* 40mm
WASTE SYSTEMS FIXING GUIDE
Install and test system in accordance with BSEN 1610:1998.
� Fix pipe brackets at maximum 1.2m centres vertical and at maximum 0.5m centres horizontal for 32mm and 40mm, 0.6m centres for 50mm.
� An allowance of a 10mm expansion gap on all push fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems.
� For solvent weld installations incorporateexpansion ring seal couplings at relevantpoints for long pipe runs.
� It is recommended that ABS andPolypropylene waste systems whereexternally installed are protected against prolonged exposure to sunlight with exterior gloss paint.
� For solvent weld systems ensure the pipe is cut square, all swarf removed and cleaning fluid applied to both surfaces of joint. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth andremove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing system.
A light in weight yet strong and cost effectiveoption, the FloPlast ABS Solvent Weld System isavailable in 32mm, 40mm and 50mm sizes withan extensive range of fittings to meet mostinstallation requirements.
ABS SOLVENT WELD SYSTEM BS EN 1455-1:2000White Black Grey
(*White only)(# Available in Black)
11www.floplast.co.uk
Made in polypropylene, this quick and easy toinstall waste system incorporating a push-fit ringseal system is available in 32mm, 40mm and50mm sizes. No solvent welding required.
PUSH-FIT WASTE SYSTEMS BS EN 1451-1:2000
Material: Polypropylene3m Wastepipe
CODE SIZEWP01 32mm
WP02 40mm
WP03 50mm
Straight Coupling
CODE SIZEWP07 32mm
WP08 40mm
WP09 50mm
90° Bend
CODE SIZEWP10 32mm
WP11 40mm
WP12 50mm
921/2° Bend
CODE SIZEWP14 32mm
WP15 40mm
WP16 50mm
135° Bend
CODE SIZEWP18 32mm
WP19 40mm
WP20 50mm
Tee
CODE SIZEWP22 32mm
WP23 40mm
WP24 50mm
50mm:Grey only White Black Grey
90° Conversion Bend
CODE SIZEWP26 32mm
WP27 40mm
Socket Plug
CODE SIZEWP30 32mm
WP31 40mm
WP32 50mm
Pipe Clip
CODE SIZEWP34 32mm
WP35 40mm
WP36 50mm
Reducer
CODE SIZEWP38 40x32mm
WP39 50x32mm
WP40 50x40mm
Tank Connector
CODE SIZEWP60 32mm
WP61 40mm
12 www.floplast.co.uk
INTRODUCTIONPVC-U SOLVENT WELD SYSTEM BS EN 1329 - 1:2000
UNICOM COMPRESSION WASTE SYSTEM BS 5254, BS EN 1451-1:2000
90° Conversion Bend
CODE SIZEMU26 32mm
MU27 40mm
MU28 50mm
Access Plug
CODE SIZEMU30 32mm
MU31 40mm
MU32 50mm
Pipe Clip
CODE SIZEMU34 32mm
MU35 40mm
MU36 50mm
Reducer
CODE SIZEMU38 40x32mm
MU39 50x32mm
MU40 50x40mm
921/2° Cross Tee
CODE SIZEMU58 40mm
MU59 50mm
Tank Connector
CODE SIZEMU60 32mm
MU61 40mm
3m Wastepipe
CODE SIZEMUO1 32mm
MUO2 40mm
MUO3 50mm
Straight Coupling
CODE SIZEMUO7 32mm
MUO8 40mm
MUO9 50mm
90° Bend
CODE SIZEMU10 32mm
MU11 40mm
MU12 50mm
921⁄2° Bend
CODE SIZEMU14 32mm
MU15 40mm
MU16 50mm
135 ° Bend
CODE SIZEMU18 32mm
MU19 40mm
MU20 50mm
Tee
CODE SIZEMU22 32mm
MU23 40mm
MU24 50mm
Material: Polypropylene3m Wastepipe
CODE SIZEWP01 32mm
WP02 40mm
Straight Coupling
CODE SIZEWC07 32mm
WC08 40mm
90° Bend
CODE SIZEWC10 32mm
WC11 40mm
0-90° Adjustable Bend
CODE SIZEWC14 32mm
WC15 40mm
135° Bend
CODE SIZEWC18 32mm
WC19 40mm
White
Tee
CODE SIZEWC22 32mm
WC23 40mm
90° Conversion Bend
CODE SIZEWC26 32mm
WC27 40mm
Reducer
CODE SIZEWC38 40x32mm
Flex-Tube
CODE SIZEFT32 32mm
FT40 40mm
This extremely durable solvent weld system isunaffected by ultra violet light, provides resistanceto most inorganic acids and alkalis and isspecifically formulated to be resistant to boilingwater and will not support combustion.
Made in polypropylene, this quick and easy toinstall waste system incorporating a compressionoutlet that accepts plastic and copper pipes.Available in 32mm and 40mm sizes. No solventwelding required.
Olive Grey
13www.floplast.co.uk
OVERFLOW WASTE SYSTEM BS 6700
A 21.5mm solvent weld overflow system in PVC-U with a comprehensive range of fittings tomeet most installation requirements
Fixing Guide� Fix pipe brackets at maximum 0.6m centres
for both vertical and horizontal runs.� No expansion gap required on the solvent
weld overflow system.
� Solvent weld joints in accordance withABS/PVC-U Waste Systems instructions.
21.5mm Overflow WastePVC-U Solvent
3m Overflow Pipe
CODEOS01
uplingStraight Coupling
CODEOS10
90° Bend
CODEOS11
135° Bend
CODEOS12
Tee
CODEOS13
Straight Tank Connector
CODEOS14
Bent Tank Connector
CODEOS15
Pipe Clip
CODEOS16
Overflow Waste Reducer
CODE SIZEOS17 X32mm
OS18 X40mm
Fits both push fit and solvent weld systems
Tee
CODE SIZEWF22 30-38mm
WF23 40-48mm
SP112 105-116mm
End Cap
CODE SIZEWF31 40-50mm
SP113 105-116mm
Coupling
CODE SIZEWF07 30-38mm
WF08 38-45mm
Elbow
CODE SIZEWF10 30-38mm
WF11 40-48mm
SP111 105-116mm
CONNECTORSGrey
White
� Flexible range of connectors, suitable for a wide variety of applications.
� Will fit all pipes (PVC/Copper/Lead etc) within each specific size range.
� Elbows and Tees must not be used in underground installation situations. End Capscan be used as temporary blanking plugs.
14 www.floplast.co.uk
PRODUCT FEATURES
0-90° Adjustable Bend
Make your life easier with the FloPlast0-90° adjustable waste bend, the onefitting that will get you out of a tight spot.
� Unicom compression fitting (will fit pipesmanufactured from polypropylene, ABS,MuPVC, and Copper).
� Available in 32mm and 40mm.
� No Solvent weld required.
ANCILLARIES
Number of joints achievable (for guidance only)
Solvent Weld 32mm 40mm 50mm 110mm
125ml 27 27 27 7
250ml 55 55 55 15
Lubricant
100gm Silicone Grease 160 120 100 60
800gm Lubricant Gel 1200 950 800 450
400ml Silicone Spray 600 420 400 225
400ml Silicone Lubricant SprayCODESL400
800gm Lubricant GelCODESG800
100gm Silicone GreaseCODESG100
125ml Solvent CementCODE
BS6209 SC125
250ml Solvent CementCODE
BS6209 SC250
ANCILLARIES
15
Soil Manifold
The FloPlast Soil Manifold is designed tofit a soil stack in the corner of a room.
Connection to the 110mm inlet is madewith a pipe end (spigot) or spigot end of afitting (normally a branch).
Connection to the waste inlets for 32mmand 40mm is achieved by removing theplug from the inlet, and fitting the wastepipe, or fitting into the manifold.Should you wish to connect 50mmpipe to the manifold, you should trimthe inlet seal where indicated.
� Helps prevent stack inducedsiphonage on connecting runs.
� Prevents crossflow design problems.
� Four waste connections possible.
� 32mm, 40mm, and 50mm connections possible in all inlets.
� No additional bosses required.
� No solvent weld joints.
� Blanking plugs supplied for inlets.
� Self cleansing design.
� Simple push-fit connection for all waste pipes.
www.floplast.co.uk
Dimension mm
A 268
B 210
C 102
D 149
E 132
F 85
G 110ø
H 89
I 75