• CAD designed• MAX OAH = 92”• MAX OAL = 252”
• 17,500 GVW
• 2 and 4 door versions
• 7.3 Power stroke Diesel
• Automatic transmission
FORD F550 CHASSIS
• Aluminum 6061 T-6 Alloy
• 112” body length
• HD under body support
grid
• 2”× 4” Box tubing sub-
structure (.250 wall)
• 6”× 4” angle perimeter
with tapered fronts
• 2 widths available
(dually or super single)
BED & BODY
CAGE
• .200 × 1.900 5086 tubing• 5 part break-a-part design• Jig built for ease of replacement• Allows top removal of tank
• 5/16” 5052 aluminum plate
• Custom diamond stamped design
Protective Mesh plating
• Poly material• Life time warranty• 400 gallons standard• 44” wide × 64” long ×
38” height• Fill tower• #70 durometer rubber
isolation plate• 3 × 3 ¼ aluminum angle
welded onto deck
WATER TANK
PUMP
• Waterous E-501-A standard
• 26.5 HP diesel
• 350 PSI @ 40 GPM
• 150 PSI @ 100 GPM
• Separate 40 amp alternator
• 2” main inlet
• 1.5” main outlet
• 2.5” inlet valve
• Other Waterous or Hale pumps available
• 2” tank to pump with ¼ turn valve
• Stainless steel discharge manifold (304-L)
• Straight shot lockable linkage
• Elkhart controls
• 2.5” inlet valve
PLUMBING
• (2) Hannay #SBEF32-23-24
• Each with 200’ of ¾” booster
• (4) 100’ lengths hose
• Hose coupled bar way NST
• Protection reels
• 50” of ¾” booster
• 3 locations: upper, lower, or under bed (AS SHOWN)
Standard
Optional
BOOSTER REELS
HOSE TRAY
• (1) 200’ bed of 1.75 pre connect
• Left or right rear side of bed
• 40” long × 18” deep × 36” high
• Aluminum construction
• ¾” OAK tool mounting wall
• Compartment lights
• (1) adjustable shelf
• Magnetic door switches (for cab door open light)
• Roll-up door (brushed aluminum)
COMPARTMENTS
• Plus 20 degree departure angle
• Steel substructure
• 4-way NFPA slip resistant cover
• Lighted recessed license plate
• Step lights
• Winch power (optional)
• Seven pin connector (optional)
• Protected FMVSS lighting modules
REAR STEP BUMPER
WINCH• WARN XI 8000
• Storage options
• 2 – 12 volt plugs
• 2 – 12 volt night lights• 95’ of 5/16 cable• Remote control coil cord
• Weather proof aluminum construction
• 3003 smooth aluminum powder coated
• Separate service door
• Chassis key energized system
• Key becomes master switch
WIRING CENTER
• Whelen “B” link multiplex system
• Light protected by Brush guard
• Grille lights
• Bumper lights
• Winch lights
• Rear warning (LED)
• FMVSS rear lower
• Scene lights (3) 12 volt
LIGHTING
• .125 Aluminum powder coating
• Lettered control bezels
• Pump control and gauges
• “T” handle control handles (locking)
• Water level gauge
• Optional foam level gauge
PUMP PANEL
• 110 volt Kussmaul auto eject
• 110 volt Kussmaul on board charger
SHORELINE
• Below the oil pan
• Under front axle hub
• Auto trans
• Fuel tank
• All painted (X-O rust) black
UNDERBODY SKID PLATES
• Foam pro 1600
• Controls on pump panel
• Class A foam .1 to 1%
• 15 gallon foam cell
FOAM SYSTEM
Optional
• CAFS• Dual agent system
• Plus 20 degree approach angle
• Alluminum or steel construction
• 12” channel
• 4” × 4” × ¼” tube substructure
• Recessed class 3 hitch and pull points
FRONT BUMPER
• 2.00 × 1.900 5086 tubing
• Nerf bar / running boards
• Lightbar guard
BRUSH GUARD(S)
• Custom offset 19.5” wheels
• ½” solid centers
• SAE 267 certified (cornering and radial)
• Wheels painted as standard (match body)
• Optional jet coat wheels
• Michelin load range H
• 285 70R / 19.5 D2 tires
• 6100 lb rating per tire
• 105 PSI inflation pressure
• Mud and snow tread
WHEELS AND TIRES
Wheels
Tires
• All aluminum construction
• Powder coated
• Diagnostic cabinet
• Custom designs available
CUSTOM CONSOLES
• Standard equipped with 4” NFPA stripe
• Optional based on fire district needs
• Gold leaf
• Scotchlite
• Custom logos
GRAPHICS
• Bumper turrets (remote joy stick control)
• Tank top storage (up to 8’ available)• Bumper spray nozzles• Air systems: breathing, tool, tire fill• Seven pin connectors• 120 volt lighting
OTHER OPTIONS
• Water cooler with mounts
• Tool storage
• Generators
• Additional compartments
• Mud flaps
OTHER OPTIONS