C A N A DA 5970 CHEDWORTH WAY, UNIT B, MISSISSAUGA. ONTARIO, CANADA L5R 4G5 | CONTRAC.CAU S A 6241 NORTHWIND PARKWAY, HOBART, INDIANA, USA 46342 | CONTRAC.US
REVISED MAY 2019
CANAAN WALL HUNG TOILET6LPF / 1.6GPF OR 3LPF / 0.8GPF
NOTES: Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
PRODUCT SPECS- HDPE tank and durable coated steel frame up to 400kg (880lbs) load capacity
- 2"x4" In Wall Carrier System
- Insulated tank to prevent condensation
- 6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf
- Chrome finish dual flush button
- Vitreous china skirted bowl
- Wash down flush action
- Adjustable carrier height to range 15¾" (400mm) to 17" (430mm) bowl rim height
- Smooth close and quick removal seat with scratch resistant and anti-uv features
- 3" pvc waste outlet included
- Water surface: 5" x 4"(127mm x 100mm)
DIMENSIONSWall Hung Bowl:350mm W x 543mm D x 364mm H
13¾" W x 21⅜" D x 14⅜" H
DIMENSIONS (CONT'D)Tank Carrier:590mm W x 90mm D x 1127 to 1277mm H
23¼" W x 3" D x 44⅜" to 50¼" H
COMPLIANCE CERTIFICATIONSMeets or exceeds the following:
- IAPMO cUPC
- ASME A112.19.2 / CSA B45.1
- ASME A112.6.2
- CSA B45.15 / ASME A112.19.5
- US EPA WaterSense
- MaP Tested 800g
SHIPPINGWall Hung Bowl:Cube 3.01
GW 64 lbs
Tank Carrier:Cube 3.8
GW 39 lbs
¨ 5780CFW Tank Carrier and Bowl Kit
Ø52mm (2")350mm (13¾")
229mm (9")
317mm(12½") 104mm
(4⅛")
Ø24mm(1")
Ø101mm (4") Ø80mm (3⅛")
137mm (5⅜")
125mm (4⅞")
55mm (2⅛")88mm(3½")
WALL HUNG BOWL - BACK VIEW:
364mm(14⅜")
543mm (21⅜")
WALL HUNG BOWL - SIDE VIEW:
590mm (23¼")
Min1127mm(44⅜")
135mm(5⅜")
313mm(12¼")
35mm(1⅜")
89mm(3½")
NPT ½"
230mm (9")
180mm (7")
1~150mm(0~6")
180mm (7")
90mm (31½")
Min: 400mm (15¾")Max: 430mm (17")
85mm (3¼")
Min: 90mm (3½")Max: 110mm (4⅜")
Min: 19mm (¾")Max: 60mm (2⅜")
FRH (Finished Rim Height)
FINISHED FLOOR
NOTE: To install the bowl as 17" ADA height or over molding, the tank carrier leg needs to be adjusted by extending it 30mm (1¼") longer.