DATE PROJECT TYPE
CATALOG NO.
REV1220
CONTECH LIGHTING | 725 LANDWEHR ROAD | NORTHBROOK, ILLINOIS 60062 | PHONE 847.559.5500 | www.contechlighting.com© 2020 Conservation Technology of Illinois, LLC. All rights reserved. Note: Specifications subject to change without notice.
K4SA | 4" LED New Construction Non-IC StopAire Downlight
9"
6-1/2"
11-1/4"
9"
4-3/16"
4"
1/2"1. Lumen values are approximate, see photometric test results
WATTAGE
LUMEN OUTPUT1
COLOR TEMPERATURE
CRI
SYSTEM RATING
DRIVER INPUT WATTAGE
DRIVER INPUT CURRENT (A) 120/277
DRIVER INPUT VOLTAGE120V Dimming (Triac, ELV, 0-10V)
277V Dimming (0-10V)Lutron HiLume® Dimming
Lutron EcoSystem® Dimming
DRIVERPower Factor
THD
LISTING
WARRANTY
10W 14W 20W
700Lm 900Lm 1200Lm
2700K, 3000K, 3500K, 4000K
90+
50,000 Hours @ 70% Lumen Maintenance
10W 14W 20W
.08/.04 .12/.05 .17/.07
120V AC, 50/60Hz277V AC, 50/60Hz120V AC, 50/60Hz120-277V AC, 50/60Hz
> 0.90< 20%
cCSAus Certified to UL StandardsSuitable for damp locationsThe following combinations are ENERGY STAR® Certified:
– LED Series 1: Flood Beam, Standard Housing with Chicago Plenum and Emergency Battery Back-up options using CTR2002 (-PL-P, -CLR-P, -WHT-P), CTR2001-P and CTR2001W-P trims only
– LED Series 1: Wide Beam, Standard Housing with Chicago Plenum and Emergency Battery Back-up options using CTR2002 (-PL-P, -CLR-P, -WHT-P) and CTR2001W-P trims only
– LED Series 2: Flood Beam, Standard Housing with Chicago Plenum and Emergency Battery Back-up options using CTR2002 (-PL-P, -CLR-P, -WHT-P) and CTR2001W-P trims only
– LED Series 3: Flood Beam, Standard Housing with Chicago Plenum and Emergency Battery Back-up options using CTR2002 (-PL-P, -CLR-P, -WHT-P), CTR2001W-P trims only
– LED Series 2 and LED Series 3 Wide Beam are not Certified– Lutron options are not Certified
Conforms to Washington State Energy code (WSEC) for low air infiltration. Tested in accordance with ASTM E283 (2.0 CFM or less).CP Housings are Chicago Plenum CCEA listed
Five (5) Year Replacement after Date of Purchase
P1
Ceiling Opening: 4-3/8"Ceiling Thickness: 1/2" – 1-1/2"
DATE PROJECT TYPE
CATALOG NO.
REV1220
CONTECH LIGHTING | 725 LANDWEHR ROAD | NORTHBROOK, ILLINOIS 60062 | PHONE 847.559.5500 | www.contechlighting.com© 2020 Conservation Technology of Illinois, LLC. All rights reserved. Note: Specifications subject to change without notice.
K4SA | 4" LED New Construction Non-IC StopAire Downlight
Options CP3 - Chicago PlenumER4 - Factory Installed 7W/200mA Emergency Battery Backup (Remote Test Switch)
1. TRIAC and ELV dimming for 120V only.2. Lutron Hi-Lume dimming only available in 120V.3. Chicago Plenum option is not available with D3 or D4 dimming. Chicago Plenum option cannot be used with Emergency Battery Backup option.4. Emergency Battery Backup option: 640 Lumen nominal average for either Series 1, 2, or 3
P2
Ordering Information
Housing/LED SeriesK4SA1 - 10W 700lm K4SA2 - 14W 900lmK4SA3 - 20W 1200lm
Electrical/DimmingMVD1 - Triac, ELV, 0-10V12D32 - Lutron Hi-Lume 1% 2-Wire LED Driver (120V Forward Phase Only)MVD4 - Lutron Hi-Lume 1% EcoSystem LED Driver with Soft-on, Fade-to-Black
Beam DistributionF - FloodW - Wide Flood
Example Order: K4SA127KCMVDW
Replacement Optics and AccessoriesStandard Hanger Bars Supplied with Housing HB-30 - 30" T-Bar Hanger SetK4OPTF - Flood Optic K4OPTW - Wide Flood Optic
Features• Aluminum housing with galvanized steel mounting frame; requires
minimum 3" clearance around fixture from insulation material. Thermal protection provided in case of improper insulation use.
• Output over-voltage, over-current and short circuit protection• Through-circuit wiring: max: (8) #12 AWG (4 in/4 out). Wiring
should be rated for at least 90°C. Chicago Plenum (CP) option is not approved for through-circuit wiring.
• Engineered optical system consists of a thermo-plastic optical housing, aluminum reflector and highly transmissive diffusion lens
• Light engine consists of a single, high output multi-chip LED array• Excellent fixture to fixture color consistency within a 3-step
MacAdam Ellipse tolerance• Many trim options available to complement any design style
Performance Summary• System provides a smooth uniform beam while eliminating view of
LED array. Two beam distributions are available. Optics are field interchangeable
• All K4SA LED downlights are available for non-dimming and dimming applications; for a list of compatible dimmers, refer to LED Dimming Specification Sheet
• The following combinations are ENERGY STAR® Certified:– LED Series 1: Flood Beam, Standard Housing with Chicago Plenum and
Emergency Battery Back-up options using CTR2002 (-PL-P, -CLR-P, -WHT-P), CTR2001-P and CTR2001W-P trims only
– LED Series 1: Wide Beam, Standard Housing with Chicago Plenum and Emergency Battery Back-up options using CTR2002 (-PL-P, -CLR-P, -WHT-P) and CTR2001W-P trims only
– LED Series 2: Flood Beam, Standard Housing with Chicago Plenum and Emergency Battery Back-up options using CTR2002 (-PL-P, -CLR-P, -WHT-P) and CTR2001W-P trims only
– LED Series 3: Flood Beam, Standard Housing with Chicago Plenum and Emergency Battery Back-up options using CTR2002 (-PL-P, -CLR-P, -WHT-P), CTR2001W-P trims only
– LED Series 2 and LED Series 3 Wide Beam are not Certified– Lutron options are not Certified
• Conforms to Washington State Energy Code (WSEC) for low air infiltration; tested in accordance with ASTM E283 (2.0 CFM or less)
• CP Housings are Chicago Plenum CCEA listed• Assembled in the USA
Warranty• This complete fixture is covered by ConTech’s full five (5) year
replacement guarantee after date of purchase• Emergency Battery option is covered by a one (1) year replacement
guarantee after date of purchase
Product Details
Color TempHigh CRI 90+ 27KC - 2700K30KC - 3000K35KC - 3500K40KC - 4000K
Trims for K4 Series LED Recessed Downlights
CTR2001SeriesBaffled Downlight3-1/2" I.D, 4-7/8" O.D.
All steel construction. (3) heat treated spring steel mounting clips. Black socket aiming bracket with screws (provided in carton).
CTR2005-P*Pin Spot, White1" I.D, 4-7/8" O.D.
All steel construction. Aluminum reflector. (3) heat treated spring steel mounting clips. Black socket aiming bracket with screws (provided in carton).
CTR2003-P*Scoop Wall Wash, White4-7/8" O.D., 1-1/2" x 3-1/2" Aperture
All steel construction. (3) heat treated spring steel mounting clips. Black socket aiming bracket with screws (provided in carton).
CTR2002 SeriesAluminum Reflector3-1/2" I.D, 4-7/8" O.D.
Aluminum reflector and steel trim ring. (3) heat treated spring steel mounting clips. Black socket aiming bracket with screws (provided in carton).
CTR2011FR Series*Flat Frosted Glass Lens Shower Light3-1/2" I.D, 4-15/16" O.D.
Wet location listed. All steel construction. (3) heat treated spring steel mounting clips. 1/8" thick heavy duty polyethylene sponge gasket.
CTR2012-P*Flat Alabite Glass Lens Shower Light, White Trim Ring3-5/8" I.D, 4-7/8" O.D.
Wet location listed. All steel construction. (3) heat treated spring steel mounting clips. 1/8" thick heavy duty polyethylene sponge gasket.
CTR2001-P Black Baffle
White Trim Ring
CTR2001W-PWhite Baffle
White Trim Ring
CTR2002-BLK-B Black Specular Aluminum Reflector
Black Trim Ring
CTR2002-CLR-P Clear Specular Aluminum Reflector
White Trim Ring
CTR2002-PL-P Platinum Aluminum Reflector
White Trim Ring
CTR2002-WHT-P White Specular Aluminum Reflector
White Trim Ring
CTR2011FR-NKBrushed Nickel Finish
CTR2011FR-PWhite Finish
*Not compatible with K4IC2 or K4ICR2 (LED Series 2)
DATE PROJECT TYPE
CATALOG NO.
REV1220
CONTECH LIGHTING | 725 LANDWEHR ROAD | NORTHBROOK, ILLINOIS 60062 | PHONE 847.559.5500 | www.contechlighting.com© 2020 Conservation Technology of Illinois, LLC. All rights reserved. Note: Specifications subject to change without notice.
DATE PROJECT TYPE
CATALOG NO.
REV1220
CONTECH LIGHTING | 725 LANDWEHR ROAD | NORTHBROOK, ILLINOIS 60062 | PHONE 847.559.5500 | www.contechlighting.com© 2020 Conservation Technology of Illinois, LLC. All rights reserved. Note: Specifications subject to change without notice.
K4SA | 4" LED New Construction Non-IC StopAire Downlight
0 90°
15°0° 30°
45°620
380
900
75°
60°
0 90°
15°0° 30°
45°1700
1000
2500
75°
60°
Candela Curve
Wavelength (nm)380 410 440 470 500 530 560 590 620 650 680 710 740 770
20
10
0
Wavelength (nm)380 410 440 470 500 530 560 590 620 650 680 710 740 770
20
10
0
Lumen output values fluctuate based on CCT. To estimate lumen output of the various CCT options, multiply 3000K results by the following:
Photometrics
Photometric Multiplication Factors
Intensity Distribution BEAM DISTANCE FOOTCANDLES DIAMETER (FT.) (FC) (FT.)
6' 58.8 4.1
8' 33.1 5.5
10' 21.2 6.9
12' 14.7 8.3
14' 10.8 9.6
16' 8.3 11.0
K4SA330KCMVDF/CTR2002-CLR-PFixture Delivered Lumens: 1269\.1Total Watts@120V: 19.7Lumens Per Watt: 64.4Center Beam Candle Power: 2118Beam Distribution: 38°Spacing Criterion: 0.70Color Rendering Index (CRI)1: 91Color Temperature (CCT)2: 3146KDesigned for 50,000 Hour Lamp Life3
LM-63 Test No. G20070201LM-79 Test No. S20070601
Candela Curve Spectral Power Distribution Chart4
Intensity Distribution
BEAM DISTANCE FOOTCANDLES DIAMETER (FT.) (FC) (FT.)
6' 23.5 7.4
8' 13.2 9.8
10' 8.4 12.3
12' 5.9 14.8
14' 4.3 17.2
16' 3.3 19.7
Fixture Delivered Lumens: 974.3Total Watts@120V: 19.7Lumens Per Watt: 49.5Center Beam Candle Power: 844Beam Distribution: 63°Spacing Criterion: 0.95Color Rendering Index (CRI)2: 91Color Temperature (CCT)3: 3075KDesigned for 50,000 Hour Lamp Life3
LM-63 Test No. G20070208LM-79 Test No. S20070602
K4SA330KCMVDW/CTR2002-PL-PSpectral Power Distribution Chart4
1. Accuracy of rendering colors 2. Color appearance of light source 3. Dependent on surrounding temperatures 4. Colors present within the light source
CCT SERIES 1 SERIES 2
2700K 0.90 0.57 0.76
3000K 1.0 0.57 0.76
3500K N/A 0.57 0.76
4000K 1.08 0.57 0.76
P3
K4 SERIES* K6 SERIES* Dimming Options MVD Dimming Range
Manufacturer Product Model Light Output
Leviton IllumaTech IPL06-10z 3%-100%
Leviton IllumaTech IPI06-1LZ 17%-100%
Leviton SureSlide R62-6674 17%-100%
Leviton SureSlide R62-6633 >1%-100%
Lutron Skylark NT-600 >1%-100%
Lutron Diva DV600P 1%-100%
Lutron Diva DVLV-600P 3%-100%
Lutron D-600P 3%-100%
Lutron Diva DVCL-153P 2%-100%
Lutron Maestro MACL-153M 3%-100%
Cooper R1061-LA 7%-100%
Cooper Devine DAL06P-C1 >1%-100%
Cooper TAL06P-C1 >1%-100%
Cooper SAL06p >1%-100%
Cooper Decorator DAL06P-C2 >1%-100%
*277V Triac Dimming is not available
• Incandescent 120VAC dimmers adjust the light with “forward phase control”, where the dimmer “chops” the forward part of the AC wave to deliver less or more power to the light source. No neutral wire connection required.
• Electronic vow voltage 120VAC dimmers adjust the light with “reverse phase control,” where the dimmer “chops” the back part of the AC wave to deliver less or more power to the light source. Neutral wire connection required.
• 0-10V DC low voltage dimmers operate using two low voltage dimming wires that are separate from the 120V or 277V AC power. The dimmer sends a variable output voltage to the fixture based upon the dimming level. 10V corresponds to undimmed operation, 5V to 50% and so on. Switching on/off is controlled with the line voltage power (120V or 277V AC) input to the dimmer and then dimming operation is controlled with the 0-10V DC low voltage wiring connection between the dimmer and the LED driver. The control signal runs on two low voltage control wires (color coded violet and gray).
• Lutron HiLume and EcoSystem dirvers provide continuous dimming from 1%-100%. For a complete list of compatible dimmers and controls, please visit www.lutron.com
DIMMING SPECIFICATIONS | K4 and K6 Series
Notes1. Testing was performed with a single fixture connected to dimmer. 2. Testing has been performed on these dimmers, but this does not imply any warranty of compatibility. 3. Dimming performance can be influenced by different loads, as well as variations in dimmer switches within the same model. 4. Dimmer maximum load rating with LED may differ from published traditional source dimmer ratings. Consult manufacturer for maximum dimmer information.5. Consult factory for additional dimming information.
REV1020
CONTECH LIGHTING | 725 LANDWEHR ROAD | NORTHBROOK, ILLINOIS 60062 | PHONE 847.559.5500 | www.contechlighting.com© 2020 Conservation Technology of Illinois, LLC. All rights reserved. Note: Specifications subject to change without notice.
DATE PROJECT TYPE
CATALOG NO.