8/8/2019 Catalogue Vignettes An
1/12
BULK AND SOLIDS HANDLING
SPECIALIST
FRENCH BUILT EQUIPMENTS
Marque dposeChemin du COULET
13720 - BELCODENE
Tl.: 06 15 38 06 07Fax: 04 42 70 64 56
E mail : [email protected]
SALES
CATALOGUE
8/8/2019 Catalogue Vignettes An
2/12
**MARQUE DEPOSEE** - Chemin du COULET - 13 720 - BELCODENE -
Tlphone: 06 15 38 06 07- Tlcopie: 04 42 0 64 56- mail: [email protected]
MEASURE AND SECURITY
Used to check either an high, low or intermediate levelinside storage equipment.Used for : powdery product
granular product.
700 LEVEL DETECTOR WITH ROTATIVE PADDLES
This equipment allows a continuous level measure, by
cyclic palpation for granular, pulverulent, light orliquid products, into small and medium size silos.
( until 30 m )
701 SILO PROBE
Equipment made to adapt the level detector with rotativepaddles to different applications or products.
700 21 ACCESSORIES FOR LEVEL DETECTOR
702 PNEUMATIC PROBE
Detects the high level ofpulverulent products, duringtanker lorry load. The low pressure air, can come from a
compressor or a fan. The level is set by adjusting the
flexible length.
Safety equipment used to protect silos and hoppers from
accidental over and under pressures.
Used when loading silos by pneumatic transport.
705 OVERPRESSURE / VACUUM RELIEF VALVES
8/8/2019 Catalogue Vignettes An
3/12
SAMPLING / SAMPLER
**MARQUE DEPOSEE** - Chemin du COULET - 13 720 - BELCODENE -
Tlphone:06 15 38 06 07- Tlcopie: 04 42 70 64 56- mail:[email protected]
Standard sampling block with a self-cleaning revolv-ing trough, and valve of closing to automatic control.This device can be automated and feed buckets, carrou-
sels of cups, cartouches etc...
710 MOTORIZED SAMPLER
Standard sampler with special assembly.
Automatism synchronizing blocking seals pot with the
sampling or the closing of the sampling duct, releasing the
pot. (accidental over pression.)
711 SPECIAL SAMPLER
Screw sampler with manual control by crank.Used either for duct or powder or granular hopper.
Circuit obturation byjaw clutching and using crank.
712 MANUAL SAMPLER
Screw sampler with manual control by crank.
Used for powder or granular duct.
Obturation and reversal of the trough by lever.
713 MANUAL SAMPLER
Used on open chute of non dusty or humid product.
Can operate on request or with programmed sampling
for any station. Servo-system at the pot presence.
714 BUCKET SAMPLER
8/8/2019 Catalogue Vignettes An
4/12
The design of the sampler enable to sample one or several
fixed volume. The drawer forms an airlock to avoid the
communication between the material duct and outer.
717 DRAWER SAMPLER
**MARQUE DEPOSEE** - Chemin du COULET - 13 720 - BELCODENE -
Tlphone: 06 15 38 06 07- Tlcopie: 04 42 70 64 56- mail: [email protected]
SAMPLING / SAMPLER
7
Screw sampler with crank control used on powder orgranular ducts - the duct is not obdurate.
715 SIMPLE MANUAL SAMPLER
Example of a sampling workshop on 800 t/h coal circuitincluding : The bucket cleaning, belt Lg. 1200 sampling ,
sample crushing, mixture of 4 samples, 1 separation of 1
sample, potting every hour.
716 SAMPLING WORKSHOP
8/8/2019 Catalogue Vignettes An
5/12
**MARQUE DEPOSEE** - Chemin du COULET - 13 720 - BELCODENE
Tlphone: 06 15 38 06 07- Tlcopie: 04 42 70 64 56- mail: [email protected]
BULK LOADING OF TRUCK, WAGON AND BIGBAG
Designed for dustless bulk loading of tank trucks and wag-
ons ; This telescopic spout increase the filled volume andmake air evacuation easier. Make a cleaner environment.
Metal duct for a better abrasion wear resistance.
720 TELESCOPIC METAL TUBE SPOUT
Designed for bulk loading of tank trucks and wagons ;
This telescopic sleeve increase the filled volume, make airevacuation easier. Height small size.
721 RETRACTABLE DUCT SPOUT
Motor-reducer hollow shaft brake make easier all thedevice of cable slack winch, guide and sensor by
pendular mounting with reaction arm.
722 INTEGRATED MOTORIZED WINCH
Compact device allow the conversion of 2 traction cablein only one for the winch. This single cable can be directed
any where or in 1/2 sphere direction. ( left/right , High/down )( the manual winch is not furnished ).
723 DEPORTED OUTER WINCH
Filtering cartridge with their un-plugging systemAllows to integrate de dusting.
This system with a small room occupied makes natural
the dust return.
724 WITH DE DUSTING INTEGRATED
For products with little dust, the natural air evacuation,pushed outside the tank by the product is passing through-
out a cartridge to improve cleanliness.
725 1 CARTRIDGE DE-DUSTING
8/8/2019 Catalogue Vignettes An
6/12
This equipment allows the loading for truck and tank.
It is constituted of one standard spout equipped with
a mobile skirt, for dust containment. A de-dusting isessential.
726 MIX LOADING SPOUT
Tank loading spout without de-dusting air circuit.(for small budget or products fine free)
727 LOADING WITHOUT ASPIRATION
Ideal for professional loading,Eitheron truck or tank, without dust. (equipment 2 in 1).A plugging for a de-dusting is envisaged. Very high effi-
ciency of operation.
729 MIX LOADING CHUTE
Our loading experiment allows us to realised all type
of spout, on specifications.
728 SPECIAL SPOUT
BULK LOADING OF TRUCK, WAGON AND BIGBAG
Ideal for trucks loading, or heap constitution without dust
emissions. Works shutting away the dust in the chute volume.
A dust collecting increase dustless loading efficiency
specially at the end of cycle.
730 TANKS LOADING CHUTE
**MARQUE DEPOSEE** - Chemin du COULET - 13 720 - BELCODENE -
Tlphone: 06 15 38 06 07- Tlcopie: 04 42 70 64 56- mail: [email protected]
For very thin products.
Filter cartridge with automatic unplugging, allows filtered airvolume to escape (equal at the loaded volume.)
No mechanic suction.
731 INTEGRATED DE DUSTING CHUTE
8/8/2019 Catalogue Vignettes An
7/12
CHARGEMENT CAMION, WAGON,BIGBAG
The prevention gate of material duct, especially studied, is
placed inside the tank loading hood, in order to decrease theglobal room occupation in height.
732 INCORPORATED GATE, FOR LOADING CHUTE
Realisation of every mobile trolley for loading spout
with their material duct, articulated, extending,fluidized or with fast plugging.
736 TROLLEY FOR MOBILE SPOUT
Associated with a lifting truck, very efficient to realised
bulk bags, from tank loading spout. The bulk bag can beweighedon station with weigh bridge. (As much product thanloading station.)
735 MOBILE BULK BAG FILLING STATION
On this example, associated at a vibrating feeder of 100T/h.
Total assembly is removable by lifting trolley after sectionroller carpet realise. Adjustable height, tare, weighed(possible commercial).
737 MOVING BULK BAG FILLING STATION
Reduced model Hood ref :730. Perfect for low flow rate
(20 to 200 t/h according to granulometry and density).The box without any speed variation, needs a smaller budget.
733 LOADING CHUTE 1000 FOR TRUCKS
BULK LOADING OF TRUCK, WAGON AND BIGBAG
**MARQUE DEPOSEE** - Chemin du COULET - 13 720 - BELCODENE -
Tlphone: 06 15 38 06 07- Tlcopie: 04 42 70 64 56- mail: [email protected]
8/8/2019 Catalogue Vignettes An
8/12
GATE SLIDE GATE
Heavy gravitational slide gate, split the powders flow
on hopper or silo exit. (Granulometry 6 mm ). Allowsto insulate by a safe way the equipment located down-
stream, in order to insure the maintenance.
740 FLAT MANUAL SLIDE GATE
Heavy gravitational slide gate, split the powders flow on
hopper or silo exit. (Granulometry 6 mm ).Controlled by jack ; can be automated.
741 FLAT PNEUMATIC SLIDE GATE
Small size and easy design.Replace advantageously the "ball valve".
2 type : * closing "all or nothing" or * opening / closingplus flow setting. (Several positions ).
742 AIRSLIDE GATE
Heavy gravitational slide gate, split the powders flow onhopper or silo exit. (Granulometry 6 mm ). Controlled byengine ; must be automated.
743 FLAT MOTORIZED SLIDE GATE
Heavy gravitational slide gate, on/off control, or with ad-justable opening, for heavy duty. Recommended for pow-
ders(Granulometry 6 mm ). Tightness realised on thejack hard chrome-plated stem. (No stuffing box)
744 SLIDE GATE ADJUSTABLE BY JACK
**MARQUE DEPOSEE** - Chemin du COULET - 13 720 - BELCODENE -
Tlphone: 06 15 38 06 07- Tlcopie: 04 42 70 64 56- mail: [email protected]
8/8/2019 Catalogue Vignettes An
9/12
GATESLIDE GATE
**MARQUE DEPOSEE** - Chemin du COULET - 13 720 - BELCODENE -
Tlphone: 06 15 38 06 07- Tlcopie: 04 42 70 64 56- mail: [email protected]
Example: Gate Valve - opening : 700 x 1100 mm- Granulometry : 0/300,
- high congestion : 600 mm- Operated by a motor-reducer.
745 SPECIAL VALVE
Heavy gravitational slide gate, with adjustable opening,
for powders(0/6 mm), in heavy duty. Tightnessrealisedon the jack hard chrome-plated stem. (No stuffing box)Controlled by engine : must be automated.
746 MOTORIZED SLIDE GATE
8/8/2019 Catalogue Vignettes An
10/12
EXTRACTION / LUMP BREAKING
Bended extractor, with 1000 belt, under multi-product hopper, with layer fitter, belt wiper, pilot,
shielding, inspection door, shock absorbing rolls,
special skirt, enclosure, cable Emergency Stop,
belt drift.
750 BELT EXTRACTOR
Lump breakers extractor with double screw 1000 x
400. The spires of the extractive part, have notches inphase with teeth on the other screw. The clods are crushed,
the product is extract by wished flow rate.
751 LUMP BREAKERS EXTRACTOR
Lump breakers 400 x 400, fluidized bottom for directexit on air slides, or compatible. Protect circuit againstproblems on machine, by clods or crusts. ( Grid remov-able without removing )
752 FLUIDIZED LUMP BREAKERS
**MARQUE DEPOSEE** - Chemin du COULET - 13 720 - BELCODENE -
Tlphone: 06 15 38 06 07- Tlcopie: 04 42 70 64 56- mail: [email protected]
8/8/2019 Catalogue Vignettes An
11/12
HANDLING / CONVEYOR
**MARQUE DEPOSEE** - Chemin du COULET - 13 720 - BELCODENE -
Tlphone: 06 15 38 06 07- Tlcopie: 04 42 70 64 56- mail: [email protected]
Airslide, manufactured turnkey, according to the orderedcircuit and pre-assembled in workshop.
Standard right lengths, bends, de-dusted sections, inlet
and outlet boxes, fans etc.
760 AIRSLIDE CONVEYOR
Standard or special Switch according to workingspecifications.
The Switch represented is used on the top of conveyor, onthe bags fall, with a small length.
761 SWITCH FOR BAG
All sizes strips conveyor, study for special case,standard model with total enclosure for cement or
plaster, standard model for quarry.
762 CONVEYOR
Much better than a shutter, leads the powders, or granular
between 2 (or 3) circuits. Better tightness between the cir-cuit, possibility to armour the mobile chute, inspection
panel, indexing possible, ...
763 2 OUTFLOW WAYS DIVERTER
8/8/2019 Catalogue Vignettes An
12/12
CEMENT FACTORY / PLASTER / CONCRETE
For handling and easier elevation until cement oven
nozzle support, weighing until 14 tons in standard.
Steering wheels by pair, hydraulic elevation, towed type
trolley ; or all motorized motion.
770 NOZZLE CARRY TROLLEY
**MARQUE DEPOSEE** - Chemin du COULET - 13 720 - BELCODENE -
Tlphone: 06 15 38 06 07- Tlcopie: 04 42 70 64 56- mail: [email protected]